diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-pca-isa.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-pca-isa.c | 39 |
1 files changed, 27 insertions, 12 deletions
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 4aa8138cb0a9..0ed68e2ccd22 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/delay.h> +#include <linux/jiffies.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/wait.h> @@ -41,15 +42,17 @@ static int irq = -1; /* Data sheet recommends 59kHz for 100kHz operation due to variation * in the actual clock rate */ -static int clock = I2C_PCA_CON_59kHz; +static int clock = 59000; +static struct i2c_adapter pca_isa_ops; static wait_queue_head_t pca_wait; static void pca_isa_writebyte(void *pd, int reg, int val) { #ifdef DEBUG_IO static char *names[] = { "T/O", "DAT", "ADR", "CON" }; - printk("*** write %s at %#lx <= %#04x\n", names[reg], base+reg, val); + printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg], + base+reg, val); #endif outb(val, base+reg); } @@ -60,7 +63,7 @@ static int pca_isa_readbyte(void *pd, int reg) #ifdef DEBUG_IO { static char *names[] = { "STA", "DAT", "ADR", "CON" }; - printk("*** read %s => %#04x\n", names[reg], res); + printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res); } #endif return res; @@ -68,16 +71,22 @@ static int pca_isa_readbyte(void *pd, int reg) static int pca_isa_waitforcompletion(void *pd) { - int ret = 0; + long ret = ~0; + unsigned long timeout; if (irq > -1) { - ret = wait_event_interruptible(pca_wait, - pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI); + ret = wait_event_interruptible_timeout(pca_wait, + pca_isa_readbyte(pd, I2C_PCA_CON) + & I2C_PCA_CON_SI, pca_isa_ops.timeout); } else { - while ((pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) + /* Do polling */ + timeout = jiffies + pca_isa_ops.timeout; + while (((pca_isa_readbyte(pd, I2C_PCA_CON) + & I2C_PCA_CON_SI) == 0) + && (ret = time_before(jiffies, timeout))) udelay(100); } - return ret; + return ret > 0; } static void pca_isa_resetchip(void *pd) @@ -102,8 +111,8 @@ static struct i2c_algo_pca_data pca_isa_data = { static struct i2c_adapter pca_isa_ops = { .owner = THIS_MODULE, .algo_data = &pca_isa_data, - .name = "PCA9564 ISA Adapter", - .timeout = 100, + .name = "PCA9564/PCA9665 ISA Adapter", + .timeout = HZ, }; static int __devinit pca_isa_match(struct device *dev, unsigned int id) @@ -195,7 +204,7 @@ static void __exit pca_isa_exit(void) } MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); -MODULE_DESCRIPTION("ISA base PCA9564 driver"); +MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver"); MODULE_LICENSE("GPL"); module_param(base, ulong, 0); @@ -204,7 +213,13 @@ MODULE_PARM_DESC(base, "I/O base address"); module_param(irq, int, 0); MODULE_PARM_DESC(irq, "IRQ"); module_param(clock, int, 0); -MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet"); +MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t" + "For PCA9564: 330000,288000,217000,146000," + "88000,59000,44000,36000\n" + "\t\tFor PCA9665:\tStandard: 60300 - 100099\n" + "\t\t\t\tFast: 100100 - 400099\n" + "\t\t\t\tFast+: 400100 - 10000099\n" + "\t\t\t\tTurbo: Up to 1265800"); module_init(pca_isa_init); module_exit(pca_isa_exit); |