diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-qup.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-qup.c | 900 |
1 files changed, 515 insertions, 385 deletions
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 3bf3c349dc70..904dfec7ab96 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -141,17 +141,40 @@ #define DEFAULT_SRC_CLK 20000000 /* + * Max tags length (start, stop and maximum 2 bytes address) for each QUP + * data transfer + */ +#define QUP_MAX_TAGS_LEN 4 +/* Max data length for each DATARD tags */ +#define RECV_MAX_DATA_LEN 254 +/* TAG length for DATA READ in RX FIFO */ +#define READ_RX_TAGS_LEN 2 + +/* * count: no of blocks * pos: current block number * tx_tag_len: tx tag length for current block * rx_tag_len: rx tag length for current block * data_len: remaining data length for current message + * cur_blk_len: data length for current block * total_tx_len: total tx length including tag bytes for current QUP transfer * total_rx_len: total rx length including tag bytes for current QUP transfer + * tx_fifo_data_pos: current byte number in TX FIFO word * tx_fifo_free: number of free bytes in current QUP block write. + * rx_fifo_data_pos: current byte number in RX FIFO word * fifo_available: number of available bytes in RX FIFO for current * QUP block read + * tx_fifo_data: QUP TX FIFO write works on word basis (4 bytes). New byte write + * to TX FIFO will be appended in this data and will be written to + * TX FIFO when all the 4 bytes are available. + * rx_fifo_data: QUP RX FIFO read works on word basis (4 bytes). This will + * contains the 4 bytes of RX data. + * cur_data: pointer to tell cur data position for current message + * cur_tx_tags: pointer to tell cur position in tags + * tx_tags_sent: all tx tag bytes have been written in FIFO word + * send_last_word: for tx FIFO, last word send is pending in current block * rx_bytes_read: if all the bytes have been read from rx FIFO. + * rx_tags_fetched: all the rx tag bytes have been fetched from rx fifo word * is_tx_blk_mode: whether tx uses block or FIFO mode in case of non BAM xfer. * is_rx_blk_mode: whether rx uses block or FIFO mode in case of non BAM xfer. * tags: contains tx tag bytes for current QUP transfer @@ -162,10 +185,20 @@ struct qup_i2c_block { int tx_tag_len; int rx_tag_len; int data_len; + int cur_blk_len; int total_tx_len; int total_rx_len; + int tx_fifo_data_pos; int tx_fifo_free; + int rx_fifo_data_pos; int fifo_available; + u32 tx_fifo_data; + u32 rx_fifo_data; + u8 *cur_data; + u8 *cur_tx_tags; + bool tx_tags_sent; + bool send_last_word; + bool rx_tags_fetched; bool rx_bytes_read; bool is_tx_blk_mode; bool is_rx_blk_mode; @@ -198,6 +231,7 @@ struct qup_i2c_dev { int out_blk_sz; int in_blk_sz; + int blk_xfer_limit; unsigned long one_byte_t; unsigned long xfer_timeout; struct qup_i2c_block blk; @@ -212,10 +246,10 @@ struct qup_i2c_dev { /* To check if this is the last msg */ bool is_last; - bool is_qup_v1; + bool is_smbus_read; /* To configure when bus is in run state */ - int config_run; + u32 config_run; /* dma parameters */ bool is_dma; @@ -223,6 +257,8 @@ struct qup_i2c_dev { bool use_dma; unsigned int max_xfer_sg_len; unsigned int tag_buf_pos; + /* The threshold length above which block mode will be used */ + unsigned int blk_mode_threshold; struct dma_pool *dpool; struct qup_i2c_tag start_tag; struct qup_i2c_bam brx; @@ -287,9 +323,6 @@ static irqreturn_t qup_i2c_interrupt(int irq, void *dev) goto done; } - if (!qup->is_qup_v1) - goto done; - if (opflags & QUP_OUT_SVC_FLAG) { writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL); @@ -416,108 +449,6 @@ static int qup_i2c_bus_active(struct qup_i2c_dev *qup, int len) return ret; } -/** - * qup_i2c_wait_ready - wait for a give number of bytes in tx/rx path - * @qup: The qup_i2c_dev device - * @op: The bit/event to wait on - * @val: value of the bit to wait on, 0 or 1 - * @len: The length the bytes to be transferred - */ -static int qup_i2c_wait_ready(struct qup_i2c_dev *qup, int op, bool val, - int len) -{ - unsigned long timeout; - u32 opflags; - u32 status; - u32 shift = __ffs(op); - int ret = 0; - - len *= qup->one_byte_t; - /* timeout after a wait of twice the max time */ - timeout = jiffies + len * 4; - - for (;;) { - opflags = readl(qup->base + QUP_OPERATIONAL); - status = readl(qup->base + QUP_I2C_STATUS); - - if (((opflags & op) >> shift) == val) { - if ((op == QUP_OUT_NOT_EMPTY) && qup->is_last) { - if (!(status & I2C_STATUS_BUS_ACTIVE)) { - ret = 0; - goto done; - } - } else { - ret = 0; - goto done; - } - } - - if (time_after(jiffies, timeout)) { - ret = -ETIMEDOUT; - goto done; - } - usleep_range(len, len * 2); - } - -done: - if (qup->bus_err || qup->qup_err) - ret = (qup->bus_err & QUP_I2C_NACK_FLAG) ? -ENXIO : -EIO; - - return ret; -} - -static void qup_i2c_set_write_mode_v2(struct qup_i2c_dev *qup, - struct i2c_msg *msg) -{ - /* Number of entries to shift out, including the tags */ - int total = msg->len + qup->blk.tx_tag_len; - - total |= qup->config_run; - - if (total < qup->out_fifo_sz) { - /* FIFO mode */ - writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); - writel(total, qup->base + QUP_MX_WRITE_CNT); - } else { - /* BLOCK mode (transfer data on chunks) */ - writel(QUP_OUTPUT_BLK_MODE | QUP_REPACK_EN, - qup->base + QUP_IO_MODE); - writel(total, qup->base + QUP_MX_OUTPUT_CNT); - } -} - -static int check_for_fifo_space(struct qup_i2c_dev *qup) -{ - int ret; - - ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); - if (ret) - goto out; - - ret = qup_i2c_wait_ready(qup, QUP_OUT_FULL, - RESET_BIT, 4 * ONE_BYTE); - if (ret) { - /* Fifo is full. Drain out the fifo */ - ret = qup_i2c_change_state(qup, QUP_RUN_STATE); - if (ret) - goto out; - - ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, - RESET_BIT, 256 * ONE_BYTE); - if (ret) { - dev_err(qup->dev, "timeout for fifo out full"); - goto out; - } - - ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); - if (ret) - goto out; - } - -out: - return ret; -} - static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup) { struct qup_i2c_block *blk = &qup->blk; @@ -560,60 +491,17 @@ static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup) static void qup_i2c_set_blk_data(struct qup_i2c_dev *qup, struct i2c_msg *msg) { - memset(&qup->blk, 0, sizeof(qup->blk)); - + qup->blk.pos = 0; qup->blk.data_len = msg->len; - qup->blk.count = (msg->len + QUP_READ_LIMIT - 1) / QUP_READ_LIMIT; - - /* 4 bytes for first block and 2 writes for rest */ - qup->blk.tx_tag_len = 4 + (qup->blk.count - 1) * 2; - - /* There are 2 tag bytes that are read in to fifo for every block */ - if (msg->flags & I2C_M_RD) - qup->blk.rx_tag_len = qup->blk.count * 2; -} - -static int qup_i2c_send_data(struct qup_i2c_dev *qup, int tlen, u8 *tbuf, - int dlen, u8 *dbuf) -{ - u32 val = 0, idx = 0, pos = 0, i = 0, t; - int len = tlen + dlen; - u8 *buf = tbuf; - int ret = 0; - - while (len > 0) { - ret = check_for_fifo_space(qup); - if (ret) - return ret; - - t = (len >= 4) ? 4 : len; - - while (idx < t) { - if (!i && (pos >= tlen)) { - buf = dbuf; - pos = 0; - i = 1; - } - val |= buf[pos++] << (idx++ * 8); - } - - writel(val, qup->base + QUP_OUT_FIFO_BASE); - idx = 0; - val = 0; - len -= 4; - } - - ret = qup_i2c_change_state(qup, QUP_RUN_STATE); - - return ret; + qup->blk.count = DIV_ROUND_UP(msg->len, qup->blk_xfer_limit); } static int qup_i2c_get_data_len(struct qup_i2c_dev *qup) { int data_len; - if (qup->blk.data_len > QUP_READ_LIMIT) - data_len = QUP_READ_LIMIT; + if (qup->blk.data_len > qup->blk_xfer_limit) + data_len = qup->blk_xfer_limit; else data_len = qup->blk.data_len; @@ -630,9 +518,9 @@ static int qup_i2c_set_tags_smb(u16 addr, u8 *tags, struct qup_i2c_dev *qup, { int len = 0; - if (msg->len > 1) { + if (qup->is_smbus_read) { tags[len++] = QUP_TAG_V2_DATARD_STOP; - tags[len++] = qup_i2c_get_data_len(qup) - 1; + tags[len++] = qup_i2c_get_data_len(qup); } else { tags[len++] = QUP_TAG_V2_START; tags[len++] = addr & 0xff; @@ -694,24 +582,6 @@ static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup, return len; } -static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) -{ - int data_len = 0, tag_len, index; - int ret; - - tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg); - index = msg->len - qup->blk.data_len; - - /* only tags are written for read */ - if (!(msg->flags & I2C_M_RD)) - data_len = qup_i2c_get_data_len(qup); - - ret = qup_i2c_send_data(qup, tag_len, qup->blk.tags, - data_len, &msg->buf[index]); - qup->blk.data_len -= data_len; - - return ret; -} static void qup_i2c_bam_cb(void *data) { @@ -778,6 +648,7 @@ static int qup_i2c_bam_make_desc(struct qup_i2c_dev *qup, struct i2c_msg *msg) u32 i = 0, tlen, tx_len = 0; u8 *tags; + qup->blk_xfer_limit = QUP_READ_LIMIT; qup_i2c_set_blk_data(qup, msg); blocks = qup->blk.count; @@ -1026,7 +897,7 @@ static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup, unsigned long left; int ret = 0; - left = wait_for_completion_timeout(&qup->xfer, HZ); + left = wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout); if (!left) { writel(1, qup->base + QUP_SW_RESET); ret = -ETIMEDOUT; @@ -1038,65 +909,6 @@ static int qup_i2c_wait_for_complete(struct qup_i2c_dev *qup, return ret; } -static int qup_i2c_write_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) -{ - int ret = 0; - - qup->msg = msg; - qup->pos = 0; - enable_irq(qup->irq); - qup_i2c_set_blk_data(qup, msg); - qup_i2c_set_write_mode_v2(qup, msg); - - ret = qup_i2c_change_state(qup, QUP_RUN_STATE); - if (ret) - goto err; - - writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); - - do { - ret = qup_i2c_issue_xfer_v2(qup, msg); - if (ret) - goto err; - - ret = qup_i2c_wait_for_complete(qup, msg); - if (ret) - goto err; - - qup->blk.pos++; - } while (qup->blk.pos < qup->blk.count); - - ret = qup_i2c_wait_ready(qup, QUP_OUT_NOT_EMPTY, RESET_BIT, ONE_BYTE); - -err: - disable_irq(qup->irq); - qup->msg = NULL; - - return ret; -} - -static void qup_i2c_set_read_mode_v2(struct qup_i2c_dev *qup, int len) -{ - int tx_len = qup->blk.tx_tag_len; - - len += qup->blk.rx_tag_len; - len |= qup->config_run; - tx_len |= qup->config_run; - - if (len < qup->in_fifo_sz) { - /* FIFO mode */ - writel(QUP_REPACK_EN, qup->base + QUP_IO_MODE); - writel(tx_len, qup->base + QUP_MX_WRITE_CNT); - writel(len, qup->base + QUP_MX_READ_CNT); - } else { - /* BLOCK mode (transfer data on chunks) */ - writel(QUP_INPUT_BLK_MODE | QUP_REPACK_EN, - qup->base + QUP_IO_MODE); - writel(tx_len, qup->base + QUP_MX_OUTPUT_CNT); - writel(len, qup->base + QUP_MX_INPUT_CNT); - } -} - static void qup_i2c_read_rx_fifo_v1(struct qup_i2c_dev *qup) { struct qup_i2c_block *blk = &qup->blk; @@ -1120,104 +932,6 @@ static void qup_i2c_read_rx_fifo_v1(struct qup_i2c_dev *qup) blk->rx_bytes_read = true; } -static int qup_i2c_read_fifo_v2(struct qup_i2c_dev *qup, - struct i2c_msg *msg) -{ - u32 val; - int idx, pos = 0, ret = 0, total, msg_offset = 0; - - /* - * If the message length is already read in - * the first byte of the buffer, account for - * that by setting the offset - */ - if (qup_i2c_check_msg_len(msg) && (msg->len > 1)) - msg_offset = 1; - total = qup_i2c_get_data_len(qup); - total -= msg_offset; - - /* 2 extra bytes for read tags */ - while (pos < (total + 2)) { - /* Check that FIFO have data */ - ret = qup_i2c_wait_ready(qup, QUP_IN_NOT_EMPTY, - SET_BIT, 4 * ONE_BYTE); - if (ret) { - dev_err(qup->dev, "timeout for fifo not empty"); - return ret; - } - val = readl(qup->base + QUP_IN_FIFO_BASE); - - for (idx = 0; idx < 4; idx++, val >>= 8, pos++) { - /* first 2 bytes are tag bytes */ - if (pos < 2) - continue; - - if (pos >= (total + 2)) - goto out; - msg->buf[qup->pos + msg_offset] = val & 0xff; - qup->pos++; - } - } - -out: - qup->blk.data_len -= total; - - return ret; -} - -static int qup_i2c_read_one_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg) -{ - int ret = 0; - - qup->msg = msg; - qup->pos = 0; - enable_irq(qup->irq); - qup_i2c_set_blk_data(qup, msg); - qup_i2c_set_read_mode_v2(qup, msg->len); - - ret = qup_i2c_change_state(qup, QUP_RUN_STATE); - if (ret) - goto err; - - writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); - - do { - ret = qup_i2c_issue_xfer_v2(qup, msg); - if (ret) - goto err; - - ret = qup_i2c_wait_for_complete(qup, msg); - if (ret) - goto err; - - ret = qup_i2c_read_fifo_v2(qup, msg); - if (ret) - goto err; - - qup->blk.pos++; - - /* Handle SMBus block read length */ - if (qup_i2c_check_msg_len(msg) && (msg->len == 1)) { - if (msg->buf[0] > I2C_SMBUS_BLOCK_MAX) { - ret = -EPROTO; - goto err; - } - msg->len += msg->buf[0]; - qup->pos = 0; - qup_i2c_set_blk_data(qup, msg); - /* set tag length for block read */ - qup->blk.tx_tag_len = 2; - qup_i2c_set_read_mode_v2(qup, msg->buf[0]); - } - } while (qup->blk.pos < qup->blk.count); - -err: - disable_irq(qup->irq); - qup->msg = NULL; - - return ret; -} - static void qup_i2c_write_rx_tags_v1(struct qup_i2c_dev *qup) { struct i2c_msg *msg = qup->msg; @@ -1404,13 +1118,434 @@ out: return ret; } +/* + * Configure registers related with reconfiguration during run and call it + * before each i2c sub transfer. + */ +static void qup_i2c_conf_count_v2(struct qup_i2c_dev *qup) +{ + struct qup_i2c_block *blk = &qup->blk; + u32 qup_config = I2C_MINI_CORE | I2C_N_VAL_V2; + + if (blk->is_tx_blk_mode) + writel(qup->config_run | blk->total_tx_len, + qup->base + QUP_MX_OUTPUT_CNT); + else + writel(qup->config_run | blk->total_tx_len, + qup->base + QUP_MX_WRITE_CNT); + + if (blk->total_rx_len) { + if (blk->is_rx_blk_mode) + writel(qup->config_run | blk->total_rx_len, + qup->base + QUP_MX_INPUT_CNT); + else + writel(qup->config_run | blk->total_rx_len, + qup->base + QUP_MX_READ_CNT); + } else { + qup_config |= QUP_NO_INPUT; + } + + writel(qup_config, qup->base + QUP_CONFIG); +} + +/* + * Configure registers related with transfer mode (FIFO/Block) + * before starting of i2c transfer. It will be called only once in + * QUP RESET state. + */ +static void qup_i2c_conf_mode_v2(struct qup_i2c_dev *qup) +{ + struct qup_i2c_block *blk = &qup->blk; + u32 io_mode = QUP_REPACK_EN; + + if (blk->is_tx_blk_mode) { + io_mode |= QUP_OUTPUT_BLK_MODE; + writel(0, qup->base + QUP_MX_WRITE_CNT); + } else { + writel(0, qup->base + QUP_MX_OUTPUT_CNT); + } + + if (blk->is_rx_blk_mode) { + io_mode |= QUP_INPUT_BLK_MODE; + writel(0, qup->base + QUP_MX_READ_CNT); + } else { + writel(0, qup->base + QUP_MX_INPUT_CNT); + } + + writel(io_mode, qup->base + QUP_IO_MODE); +} + +/* Clear required variables before starting of any QUP v2 sub transfer. */ +static void qup_i2c_clear_blk_v2(struct qup_i2c_block *blk) +{ + blk->send_last_word = false; + blk->tx_tags_sent = false; + blk->tx_fifo_data = 0; + blk->tx_fifo_data_pos = 0; + blk->tx_fifo_free = 0; + + blk->rx_tags_fetched = false; + blk->rx_bytes_read = false; + blk->rx_fifo_data = 0; + blk->rx_fifo_data_pos = 0; + blk->fifo_available = 0; +} + +/* Receive data from RX FIFO for read message in QUP v2 i2c transfer. */ +static void qup_i2c_recv_data(struct qup_i2c_dev *qup) +{ + struct qup_i2c_block *blk = &qup->blk; + int j; + + for (j = blk->rx_fifo_data_pos; + blk->cur_blk_len && blk->fifo_available; + blk->cur_blk_len--, blk->fifo_available--) { + if (j == 0) + blk->rx_fifo_data = readl(qup->base + QUP_IN_FIFO_BASE); + + *(blk->cur_data++) = blk->rx_fifo_data; + blk->rx_fifo_data >>= 8; + + if (j == 3) + j = 0; + else + j++; + } + + blk->rx_fifo_data_pos = j; +} + +/* Receive tags for read message in QUP v2 i2c transfer. */ +static void qup_i2c_recv_tags(struct qup_i2c_dev *qup) +{ + struct qup_i2c_block *blk = &qup->blk; + + blk->rx_fifo_data = readl(qup->base + QUP_IN_FIFO_BASE); + blk->rx_fifo_data >>= blk->rx_tag_len * 8; + blk->rx_fifo_data_pos = blk->rx_tag_len; + blk->fifo_available -= blk->rx_tag_len; +} + +/* + * Read the data and tags from RX FIFO. Since in read case, the tags will be + * preceded by received data bytes so + * 1. Check if rx_tags_fetched is false i.e. the start of QUP block so receive + * all tag bytes and discard that. + * 2. Read the data from RX FIFO. When all the data bytes have been read then + * set rx_bytes_read to true. + */ +static void qup_i2c_read_rx_fifo_v2(struct qup_i2c_dev *qup) +{ + struct qup_i2c_block *blk = &qup->blk; + + if (!blk->rx_tags_fetched) { + qup_i2c_recv_tags(qup); + blk->rx_tags_fetched = true; + } + + qup_i2c_recv_data(qup); + if (!blk->cur_blk_len) + blk->rx_bytes_read = true; +} + +/* + * Write bytes in TX FIFO for write message in QUP v2 i2c transfer. QUP TX FIFO + * write works on word basis (4 bytes). Append new data byte write for TX FIFO + * in tx_fifo_data and write to TX FIFO when all the 4 bytes are present. + */ +static void +qup_i2c_write_blk_data(struct qup_i2c_dev *qup, u8 **data, unsigned int *len) +{ + struct qup_i2c_block *blk = &qup->blk; + unsigned int j; + + for (j = blk->tx_fifo_data_pos; *len && blk->tx_fifo_free; + (*len)--, blk->tx_fifo_free--) { + blk->tx_fifo_data |= *(*data)++ << (j * 8); + if (j == 3) { + writel(blk->tx_fifo_data, + qup->base + QUP_OUT_FIFO_BASE); + blk->tx_fifo_data = 0x0; + j = 0; + } else { + j++; + } + } + + blk->tx_fifo_data_pos = j; +} + +/* Transfer tags for read message in QUP v2 i2c transfer. */ +static void qup_i2c_write_rx_tags_v2(struct qup_i2c_dev *qup) +{ + struct qup_i2c_block *blk = &qup->blk; + + qup_i2c_write_blk_data(qup, &blk->cur_tx_tags, &blk->tx_tag_len); + if (blk->tx_fifo_data_pos) + writel(blk->tx_fifo_data, qup->base + QUP_OUT_FIFO_BASE); +} + +/* + * Write the data and tags in TX FIFO. Since in write case, both tags and data + * need to be written and QUP write tags can have maximum 256 data length, so + * + * 1. Check if tx_tags_sent is false i.e. the start of QUP block so write the + * tags to TX FIFO and set tx_tags_sent to true. + * 2. Check if send_last_word is true. It will be set when last few data bytes + * (less than 4 bytes) are reamining to be written in FIFO because of no FIFO + * space. All this data bytes are available in tx_fifo_data so write this + * in FIFO. + * 3. Write the data to TX FIFO and check for cur_blk_len. If it is non zero + * then more data is pending otherwise following 3 cases can be possible + * a. if tx_fifo_data_pos is zero i.e. all the data bytes in this block + * have been written in TX FIFO so nothing else is required. + * b. tx_fifo_free is non zero i.e tx FIFO is free so copy the remaining data + * from tx_fifo_data to tx FIFO. Since, qup_i2c_write_blk_data do write + * in 4 bytes and FIFO space is in multiple of 4 bytes so tx_fifo_free + * will be always greater than or equal to 4 bytes. + * c. tx_fifo_free is zero. In this case, last few bytes (less than 4 + * bytes) are copied to tx_fifo_data but couldn't be sent because of + * FIFO full so make send_last_word true. + */ +static void qup_i2c_write_tx_fifo_v2(struct qup_i2c_dev *qup) +{ + struct qup_i2c_block *blk = &qup->blk; + + if (!blk->tx_tags_sent) { + qup_i2c_write_blk_data(qup, &blk->cur_tx_tags, + &blk->tx_tag_len); + blk->tx_tags_sent = true; + } + + if (blk->send_last_word) + goto send_last_word; + + qup_i2c_write_blk_data(qup, &blk->cur_data, &blk->cur_blk_len); + if (!blk->cur_blk_len) { + if (!blk->tx_fifo_data_pos) + return; + + if (blk->tx_fifo_free) + goto send_last_word; + + blk->send_last_word = true; + } + + return; + +send_last_word: + writel(blk->tx_fifo_data, qup->base + QUP_OUT_FIFO_BASE); +} + +/* + * Main transfer function which read or write i2c data. + * The QUP v2 supports reconfiguration during run in which multiple i2c sub + * transfers can be scheduled. + */ +static int +qup_i2c_conf_xfer_v2(struct qup_i2c_dev *qup, bool is_rx, bool is_first, + bool change_pause_state) +{ + struct qup_i2c_block *blk = &qup->blk; + struct i2c_msg *msg = qup->msg; + int ret; + + /* + * Check if its SMBus Block read for which the top level read will be + * done into 2 QUP reads. One with message length 1 while other one is + * with actual length. + */ + if (qup_i2c_check_msg_len(msg)) { + if (qup->is_smbus_read) { + /* + * If the message length is already read in + * the first byte of the buffer, account for + * that by setting the offset + */ + blk->cur_data += 1; + is_first = false; + } else { + change_pause_state = false; + } + } + + qup->config_run = is_first ? 0 : QUP_I2C_MX_CONFIG_DURING_RUN; + + qup_i2c_clear_blk_v2(blk); + qup_i2c_conf_count_v2(qup); + + /* If it is first sub transfer, then configure i2c bus clocks */ + if (is_first) { + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + return ret; + + writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); + + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + if (ret) + return ret; + } + + reinit_completion(&qup->xfer); + enable_irq(qup->irq); + /* + * In FIFO mode, tx FIFO can be written directly while in block mode the + * it will be written after getting OUT_BLOCK_WRITE_REQ interrupt + */ + if (!blk->is_tx_blk_mode) { + blk->tx_fifo_free = qup->out_fifo_sz; + + if (is_rx) + qup_i2c_write_rx_tags_v2(qup); + else + qup_i2c_write_tx_fifo_v2(qup); + } + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + goto err; + + ret = qup_i2c_wait_for_complete(qup, msg); + if (ret) + goto err; + + /* Move to pause state for all the transfers, except last one */ + if (change_pause_state) { + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + if (ret) + goto err; + } + +err: + disable_irq(qup->irq); + return ret; +} + +/* + * Transfer one read/write message in i2c transfer. It splits the message into + * multiple of blk_xfer_limit data length blocks and schedule each + * QUP block individually. + */ +static int qup_i2c_xfer_v2_msg(struct qup_i2c_dev *qup, int msg_id, bool is_rx) +{ + int ret = 0; + unsigned int data_len, i; + struct i2c_msg *msg = qup->msg; + struct qup_i2c_block *blk = &qup->blk; + u8 *msg_buf = msg->buf; + + qup->blk_xfer_limit = is_rx ? RECV_MAX_DATA_LEN : QUP_READ_LIMIT; + qup_i2c_set_blk_data(qup, msg); + + for (i = 0; i < blk->count; i++) { + data_len = qup_i2c_get_data_len(qup); + blk->pos = i; + blk->cur_tx_tags = blk->tags; + blk->cur_blk_len = data_len; + blk->tx_tag_len = + qup_i2c_set_tags(blk->cur_tx_tags, qup, qup->msg); + + blk->cur_data = msg_buf; + + if (is_rx) { + blk->total_tx_len = blk->tx_tag_len; + blk->rx_tag_len = 2; + blk->total_rx_len = blk->rx_tag_len + data_len; + } else { + blk->total_tx_len = blk->tx_tag_len + data_len; + blk->total_rx_len = 0; + } + + ret = qup_i2c_conf_xfer_v2(qup, is_rx, !msg_id && !i, + !qup->is_last || i < blk->count - 1); + if (ret) + return ret; + + /* Handle SMBus block read length */ + if (qup_i2c_check_msg_len(msg) && msg->len == 1 && + !qup->is_smbus_read) { + if (msg->buf[0] > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + + msg->len = msg->buf[0]; + qup->is_smbus_read = true; + ret = qup_i2c_xfer_v2_msg(qup, msg_id, true); + qup->is_smbus_read = false; + if (ret) + return ret; + + msg->len += 1; + } + + msg_buf += data_len; + blk->data_len -= qup->blk_xfer_limit; + } + + return ret; +} + +/* + * QUP v2 supports 3 modes + * Programmed IO using FIFO mode : Less than FIFO size + * Programmed IO using Block mode : Greater than FIFO size + * DMA using BAM : Appropriate for any transaction size but the address should + * be DMA applicable + * + * This function determines the mode which will be used for this transfer. An + * i2c transfer contains multiple message. Following are the rules to determine + * the mode used. + * 1. Determine complete length, maximum tx and rx length for complete transfer. + * 2. If complete transfer length is greater than fifo size then use the DMA + * mode. + * 3. In FIFO or block mode, tx and rx can operate in different mode so check + * for maximum tx and rx length to determine mode. + */ +static int +qup_i2c_determine_mode_v2(struct qup_i2c_dev *qup, + struct i2c_msg msgs[], int num) +{ + int idx; + bool no_dma = false; + unsigned int max_tx_len = 0, max_rx_len = 0, total_len = 0; + + /* All i2c_msgs should be transferred using either dma or cpu */ + for (idx = 0; idx < num; idx++) { + if (msgs[idx].len == 0) + return -EINVAL; + + if (msgs[idx].flags & I2C_M_RD) + max_rx_len = max_t(unsigned int, max_rx_len, + msgs[idx].len); + else + max_tx_len = max_t(unsigned int, max_tx_len, + msgs[idx].len); + + if (is_vmalloc_addr(msgs[idx].buf)) + no_dma = true; + + total_len += msgs[idx].len; + } + + if (!no_dma && qup->is_dma && + (total_len > qup->out_fifo_sz || total_len > qup->in_fifo_sz)) { + qup->use_dma = true; + } else { + qup->blk.is_tx_blk_mode = max_tx_len > qup->out_fifo_sz - + QUP_MAX_TAGS_LEN ? true : false; + qup->blk.is_rx_blk_mode = max_rx_len > qup->in_fifo_sz - + READ_RX_TAGS_LEN ? true : false; + } + + return 0; +} + static int qup_i2c_xfer_v2(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct qup_i2c_dev *qup = i2c_get_adapdata(adap); int ret, idx = 0; - unsigned int total_len = 0; qup->bus_err = 0; qup->qup_err = 0; @@ -1419,6 +1554,10 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, if (ret < 0) goto out; + ret = qup_i2c_determine_mode_v2(qup, msgs, num); + if (ret) + goto out; + writel(1, qup->base + QUP_SW_RESET); ret = qup_i2c_poll_state(qup, QUP_RESET_STATE); if (ret) @@ -1428,60 +1567,35 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, writel(I2C_MINI_CORE | I2C_N_VAL_V2, qup->base + QUP_CONFIG); writel(QUP_V2_TAGS_EN, qup->base + QUP_I2C_MASTER_GEN); - if ((qup->is_dma)) { - /* All i2c_msgs should be transferred using either dma or cpu */ - for (idx = 0; idx < num; idx++) { - if (msgs[idx].len == 0) { - ret = -EINVAL; - goto out; - } - - if (is_vmalloc_addr(msgs[idx].buf)) - break; - - total_len += msgs[idx].len; - } - - if (idx == num && (total_len > qup->out_fifo_sz || - total_len > qup->in_fifo_sz)) - qup->use_dma = true; + if (qup_i2c_poll_state_i2c_master(qup)) { + ret = -EIO; + goto out; } - idx = 0; + if (qup->use_dma) { + reinit_completion(&qup->xfer); + ret = qup_i2c_bam_xfer(adap, &msgs[0], num); + qup->use_dma = false; + } else { + qup_i2c_conf_mode_v2(qup); - do { - if (msgs[idx].len == 0) { - ret = -EINVAL; - goto out; - } + for (idx = 0; idx < num; idx++) { + qup->msg = &msgs[idx]; + qup->is_last = idx == (num - 1); - if (qup_i2c_poll_state_i2c_master(qup)) { - ret = -EIO; - goto out; + ret = qup_i2c_xfer_v2_msg(qup, idx, + !!(msgs[idx].flags & I2C_M_RD)); + if (ret) + break; } + qup->msg = NULL; + } - qup->is_last = (idx == (num - 1)); - if (idx) - qup->config_run = QUP_I2C_MX_CONFIG_DURING_RUN; - else - qup->config_run = 0; - - reinit_completion(&qup->xfer); - - if (qup->use_dma) { - ret = qup_i2c_bam_xfer(adap, &msgs[idx], num); - qup->use_dma = false; - break; - } else { - if (msgs[idx].flags & I2C_M_RD) - ret = qup_i2c_read_one_v2(qup, &msgs[idx]); - else - ret = qup_i2c_write_one_v2(qup, &msgs[idx]); - } - } while ((idx++ < (num - 1)) && !ret); + if (!ret) + ret = qup_i2c_bus_active(qup, ONE_BYTE); if (!ret) - ret = qup_i2c_change_state(qup, QUP_RESET_STATE); + qup_i2c_change_state(qup, QUP_RESET_STATE); if (ret == 0) ret = num; @@ -1545,6 +1659,7 @@ static int qup_i2c_probe(struct platform_device *pdev) u32 src_clk_freq = DEFAULT_SRC_CLK; u32 clk_freq = DEFAULT_CLK_FREQ; int blocks; + bool is_qup_v1; qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL); if (!qup) @@ -1563,12 +1678,10 @@ static int qup_i2c_probe(struct platform_device *pdev) if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) { qup->adap.algo = &qup_i2c_algo; qup->adap.quirks = &qup_i2c_quirks; - qup->is_qup_v1 = true; - qup->write_tx_fifo = qup_i2c_write_tx_fifo_v1; - qup->read_rx_fifo = qup_i2c_read_rx_fifo_v1; - qup->write_rx_tags = qup_i2c_write_rx_tags_v1; + is_qup_v1 = true; } else { qup->adap.algo = &qup_i2c_algo_v2; + is_qup_v1 = false; ret = qup_i2c_req_dma(qup); if (ret == -EPROBE_DEFER) @@ -1694,14 +1807,31 @@ nodma: ret = -EIO; goto fail; } - qup->out_blk_sz = blk_sizes[size] / 2; + qup->out_blk_sz = blk_sizes[size]; size = QUP_INPUT_BLOCK_SIZE(io_mode); if (size >= ARRAY_SIZE(blk_sizes)) { ret = -EIO; goto fail; } - qup->in_blk_sz = blk_sizes[size] / 2; + qup->in_blk_sz = blk_sizes[size]; + + if (is_qup_v1) { + /* + * in QUP v1, QUP_CONFIG uses N as 15 i.e 16 bits constitutes a + * single transfer but the block size is in bytes so divide the + * in_blk_sz and out_blk_sz by 2 + */ + qup->in_blk_sz /= 2; + qup->out_blk_sz /= 2; + qup->write_tx_fifo = qup_i2c_write_tx_fifo_v1; + qup->read_rx_fifo = qup_i2c_read_rx_fifo_v1; + qup->write_rx_tags = qup_i2c_write_rx_tags_v1; + } else { + qup->write_tx_fifo = qup_i2c_write_tx_fifo_v2; + qup->read_rx_fifo = qup_i2c_read_rx_fifo_v2; + qup->write_rx_tags = qup_i2c_write_rx_tags_v2; + } size = QUP_OUTPUT_FIFO_SIZE(io_mode); qup->out_fifo_sz = qup->out_blk_sz * (2 << size); |