summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-i801.c13
-rw-r--r--drivers/i2c/busses/i2c-imx.c40
-rw-r--r--drivers/i2c/busses/i2c-nuc900.c2
-rw-r--r--drivers/i2c/busses/i2c-ocores.c4
-rw-r--r--drivers/i2c/busses/i2c-piix4.c5
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c4
-rw-r--r--drivers/i2c/busses/i2c-viperboard.c480
9 files changed, 534 insertions, 25 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e9df4612b7eb..c7bff51fe524 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -818,6 +818,16 @@ config I2C_TINY_USB
This driver can also be built as a module. If so, the module
will be called i2c-tiny-usb.
+config I2C_VIPERBOARD
+ tristate "Viperboard I2C master support"
+ depends on MFD_VIPERBOARD && USB
+ help
+ Say yes here to access the I2C part of the Nano River
+ Technologies Viperboard as I2C master.
+ See viperboard API specification and Nano
+ River Tech's viperboard.h for detailed meaning
+ of the module parameters.
+
comment "Other I2C/SMBus bus drivers"
config I2C_ACORN
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 395b516ffa08..e5cb209d276c 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
+obj-$(CONFIG_I2C_VIPERBOARD) += i2c-viperboard.o
# Other I2C/SMBus bus drivers
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 6abc00d59881..1e73638225e1 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -81,6 +81,7 @@
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/err.h>
+#include <linux/of_i2c.h>
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
defined CONFIG_DMI
@@ -1108,6 +1109,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
/* fall through */
default:
priv->features |= FEATURE_I2C_BLOCK_READ;
+ priv->features |= FEATURE_IRQ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
priv->features |= FEATURE_SMBUS_PEC;
@@ -1120,16 +1122,6 @@ static int __devinit i801_probe(struct pci_dev *dev,
break;
}
- /* IRQ processing tested on CougarPoint PCH, ICH5, ICH7-M and ICH10 */
- if (dev->device == PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS ||
- dev->device == PCI_DEVICE_ID_INTEL_82801EB_3 ||
- dev->device == PCI_DEVICE_ID_INTEL_ICH7_17 ||
- dev->device == PCI_DEVICE_ID_INTEL_ICH8_5 ||
- dev->device == PCI_DEVICE_ID_INTEL_ICH9_6 ||
- dev->device == PCI_DEVICE_ID_INTEL_ICH10_4 ||
- dev->device == PCI_DEVICE_ID_INTEL_ICH10_5)
- priv->features |= FEATURE_IRQ;
-
/* Disable features on user request */
for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
if (priv->features & disable_features & (1 << i))
@@ -1215,6 +1207,7 @@ static int __devinit i801_probe(struct pci_dev *dev,
goto exit_free_irq;
}
+ of_i2c_register_devices(&priv->adapter);
i801_probe_optional_slaves(priv);
/* We ignore errors - multiplexing is optional */
i801_add_mux(priv);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 2ef162d148cb..b9734747d610 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -52,8 +52,6 @@
#include <linux/of_device.h>
#include <linux/of_i2c.h>
#include <linux/pinctrl/consumer.h>
-
-#include <mach/hardware.h>
#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
@@ -115,6 +113,11 @@ static u16 __initdata i2c_clk_div[50][2] = {
{ 3072, 0x1E }, { 3840, 0x1F }
};
+enum imx_i2c_type {
+ IMX1_I2C,
+ IMX21_I2C,
+};
+
struct imx_i2c_struct {
struct i2c_adapter adapter;
struct clk *clk;
@@ -124,13 +127,33 @@ struct imx_i2c_struct {
unsigned int disable_delay;
int stopped;
unsigned int ifdr; /* IMX_I2C_IFDR */
+ enum imx_i2c_type devtype;
+};
+
+static struct platform_device_id imx_i2c_devtype[] = {
+ {
+ .name = "imx1-i2c",
+ .driver_data = IMX1_I2C,
+ }, {
+ .name = "imx21-i2c",
+ .driver_data = IMX21_I2C,
+ }, {
+ /* sentinel */
+ }
};
+MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
static const struct of_device_id i2c_imx_dt_ids[] = {
- { .compatible = "fsl,imx1-i2c", },
+ { .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
+ { .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
{ /* sentinel */ }
};
+static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
+{
+ return i2c_imx->devtype == IMX1_I2C;
+}
+
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
@@ -223,7 +246,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
}
- if (cpu_is_mx1()) {
+ if (is_imx1_i2c(i2c_imx)) {
/*
* This delay caused by an i.MXL hardware bug.
* If no (or too short) delay, no "STOP" bit will be generated.
@@ -465,6 +488,8 @@ static struct i2c_algorithm i2c_imx_algo = {
static int __init i2c_imx_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
+ &pdev->dev);
struct imx_i2c_struct *i2c_imx;
struct resource *res;
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
@@ -497,6 +522,10 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ if (of_id)
+ pdev->id_entry = of_id->data;
+ i2c_imx->devtype = pdev->id_entry->driver_data;
+
/* Setup i2c_imx driver structure */
strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
i2c_imx->adapter.owner = THIS_MODULE;
@@ -593,7 +622,8 @@ static struct platform_driver i2c_imx_driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = i2c_imx_dt_ids,
- }
+ },
+ .id_table = imx_i2c_devtype,
};
static int __init i2c_adap_imx_init(void)
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index f41502ef3f55..a23b91b0b738 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -304,7 +304,7 @@ retry_write:
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index bffd5501ac2d..15da1ac7cf9e 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -9,10 +9,6 @@
* kind, whether express or implied.
*/
-/*
- * This driver can be used from the device tree, see
- * Documentation/devicetree/bindings/i2c/ocore-i2c.txt
- */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 8bbd6ece7c41..f7216ed2f3a9 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -204,9 +204,8 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
*/
pci_write_config_byte(PIIX4_dev, SMBHSTCFG,
temp | 1);
- dev_printk(KERN_NOTICE, &PIIX4_dev->dev,
- "WARNING: SMBus interface has been "
- "FORCEFULLY ENABLED!\n");
+ dev_notice(&PIIX4_dev->dev,
+ "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n");
} else {
dev_err(&PIIX4_dev->dev,
"Host SMBus controller not enabled!\n");
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 9d902725bac9..b33d95ebc890 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -208,7 +208,7 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
- /* todo - check for wether ack wanted or not */
+ /* todo - check for whether ack wanted or not */
s3c24xx_i2c_enable_ack(i2c);
iiccon = readl(i2c->regs + S3C2410_IICCON);
@@ -397,7 +397,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
case STATE_READ:
/* we have a byte of data in the data register, do
- * something with it, and then work out wether we are
+ * something with it, and then work out whether we are
* going to do any more read/write
*/
diff --git a/drivers/i2c/busses/i2c-viperboard.c b/drivers/i2c/busses/i2c-viperboard.c
new file mode 100644
index 000000000000..f5fa20dea906
--- /dev/null
+++ b/drivers/i2c/busses/i2c-viperboard.c
@@ -0,0 +1,480 @@
+/*
+ * Nano River Technologies viperboard i2c master driver
+ *
+ * (C) 2012 by Lemonage GmbH
+ * Author: Lars Poeschel <poeschel@lemonage.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/viperboard.h>
+
+struct vprbrd_i2c {
+ struct i2c_adapter i2c;
+ u8 bus_freq_param;
+};
+
+/* i2c bus frequency module parameter */
+static u8 i2c_bus_param;
+static unsigned int i2c_bus_freq = 100;
+module_param(i2c_bus_freq, int, 0);
+MODULE_PARM_DESC(i2c_bus_freq,
+ "i2c bus frequency in khz (default is 100) valid values: 10, 100, 200, 400, 1000, 3000, 6000");
+
+static int vprbrd_i2c_status(struct i2c_adapter *i2c,
+ struct vprbrd_i2c_status *status, bool prev_error)
+{
+ u16 bytes_xfer;
+ int ret;
+ struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+
+ /* check for protocol error */
+ bytes_xfer = sizeof(struct vprbrd_i2c_status);
+
+ ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
+ VPRBRD_USB_REQUEST_I2C, VPRBRD_USB_TYPE_IN, 0x0000, 0x0000,
+ status, bytes_xfer, VPRBRD_USB_TIMEOUT_MS);
+
+ if (ret != bytes_xfer)
+ prev_error = true;
+
+ if (prev_error) {
+ dev_err(&i2c->dev, "failure in usb communication\n");
+ return -EREMOTEIO;
+ }
+
+ dev_dbg(&i2c->dev, " status = %d\n", status->status);
+ if (status->status != 0x00) {
+ dev_err(&i2c->dev, "failure: i2c protocol error\n");
+ return -EPROTO;
+ }
+ return 0;
+}
+
+static int vprbrd_i2c_receive(struct usb_device *usb_dev,
+ struct vprbrd_i2c_read_msg *rmsg, int bytes_xfer)
+{
+ int ret, bytes_actual;
+ int error = 0;
+
+ /* send the read request */
+ ret = usb_bulk_msg(usb_dev,
+ usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), rmsg,
+ sizeof(struct vprbrd_i2c_read_hdr), &bytes_actual,
+ VPRBRD_USB_TIMEOUT_MS);
+
+ if ((ret < 0)
+ || (bytes_actual != sizeof(struct vprbrd_i2c_read_hdr))) {
+ dev_err(&usb_dev->dev, "failure transmitting usb\n");
+ error = -EREMOTEIO;
+ }
+
+ /* read the actual data */
+ ret = usb_bulk_msg(usb_dev,
+ usb_rcvbulkpipe(usb_dev, VPRBRD_EP_IN), rmsg,
+ bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+
+ if ((ret < 0) || (bytes_xfer != bytes_actual)) {
+ dev_err(&usb_dev->dev, "failure receiving usb\n");
+ error = -EREMOTEIO;
+ }
+ return error;
+}
+
+static int vprbrd_i2c_addr(struct usb_device *usb_dev,
+ struct vprbrd_i2c_addr_msg *amsg)
+{
+ int ret, bytes_actual;
+
+ ret = usb_bulk_msg(usb_dev,
+ usb_sndbulkpipe(usb_dev, VPRBRD_EP_OUT), amsg,
+ sizeof(struct vprbrd_i2c_addr_msg), &bytes_actual,
+ VPRBRD_USB_TIMEOUT_MS);
+
+ if ((ret < 0) ||
+ (sizeof(struct vprbrd_i2c_addr_msg) != bytes_actual)) {
+ dev_err(&usb_dev->dev, "failure transmitting usb\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int vprbrd_i2c_read(struct vprbrd *vb, struct i2c_msg *msg)
+{
+ int ret;
+ u16 remain_len, bytes_xfer, len1, len2,
+ start = 0x0000;
+ struct vprbrd_i2c_read_msg *rmsg =
+ (struct vprbrd_i2c_read_msg *)vb->buf;
+
+ remain_len = msg->len;
+ rmsg->header.cmd = VPRBRD_I2C_CMD_READ;
+ while (remain_len > 0) {
+ rmsg->header.addr = cpu_to_le16(start + 0x4000);
+ if (remain_len <= 255) {
+ len1 = remain_len;
+ len2 = 0x00;
+ rmsg->header.len0 = remain_len;
+ rmsg->header.len1 = 0x00;
+ rmsg->header.len2 = 0x00;
+ rmsg->header.len3 = 0x00;
+ rmsg->header.len4 = 0x00;
+ rmsg->header.len5 = 0x00;
+ remain_len = 0;
+ } else if (remain_len <= 510) {
+ len1 = remain_len;
+ len2 = 0x00;
+ rmsg->header.len0 = remain_len - 255;
+ rmsg->header.len1 = 0xff;
+ rmsg->header.len2 = 0x00;
+ rmsg->header.len3 = 0x00;
+ rmsg->header.len4 = 0x00;
+ rmsg->header.len5 = 0x00;
+ remain_len = 0;
+ } else if (remain_len <= 512) {
+ len1 = remain_len;
+ len2 = 0x00;
+ rmsg->header.len0 = remain_len - 510;
+ rmsg->header.len1 = 0xff;
+ rmsg->header.len2 = 0xff;
+ rmsg->header.len3 = 0x00;
+ rmsg->header.len4 = 0x00;
+ rmsg->header.len5 = 0x00;
+ remain_len = 0;
+ } else if (remain_len <= 767) {
+ len1 = 512;
+ len2 = remain_len - 512;
+ rmsg->header.len0 = 0x02;
+ rmsg->header.len1 = 0xff;
+ rmsg->header.len2 = 0xff;
+ rmsg->header.len3 = remain_len - 512;
+ rmsg->header.len4 = 0x00;
+ rmsg->header.len5 = 0x00;
+ bytes_xfer = remain_len;
+ remain_len = 0;
+ } else if (remain_len <= 1022) {
+ len1 = 512;
+ len2 = remain_len - 512;
+ rmsg->header.len0 = 0x02;
+ rmsg->header.len1 = 0xff;
+ rmsg->header.len2 = 0xff;
+ rmsg->header.len3 = remain_len - 767;
+ rmsg->header.len4 = 0xff;
+ rmsg->header.len5 = 0x00;
+ remain_len = 0;
+ } else if (remain_len <= 1024) {
+ len1 = 512;
+ len2 = remain_len - 512;
+ rmsg->header.len0 = 0x02;
+ rmsg->header.len1 = 0xff;
+ rmsg->header.len2 = 0xff;
+ rmsg->header.len3 = remain_len - 1022;
+ rmsg->header.len4 = 0xff;
+ rmsg->header.len5 = 0xff;
+ remain_len = 0;
+ } else {
+ len1 = 512;
+ len2 = 512;
+ rmsg->header.len0 = 0x02;
+ rmsg->header.len1 = 0xff;
+ rmsg->header.len2 = 0xff;
+ rmsg->header.len3 = 0x02;
+ rmsg->header.len4 = 0xff;
+ rmsg->header.len5 = 0xff;
+ remain_len -= 1024;
+ start += 1024;
+ }
+ rmsg->header.tf1 = cpu_to_le16(len1);
+ rmsg->header.tf2 = cpu_to_le16(len2);
+
+ /* first read transfer */
+ ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len1);
+ if (ret < 0)
+ return ret;
+ /* copy the received data */
+ memcpy(msg->buf + start, rmsg, len1);
+
+ /* second read transfer if neccessary */
+ if (len2 > 0) {
+ ret = vprbrd_i2c_receive(vb->usb_dev, rmsg, len2);
+ if (ret < 0)
+ return ret;
+ /* copy the received data */
+ memcpy(msg->buf + start + 512, rmsg, len2);
+ }
+ }
+ return 0;
+}
+
+static int vprbrd_i2c_write(struct vprbrd *vb, struct i2c_msg *msg)
+{
+ int ret, bytes_actual;
+ u16 remain_len, bytes_xfer,
+ start = 0x0000;
+ struct vprbrd_i2c_write_msg *wmsg =
+ (struct vprbrd_i2c_write_msg *)vb->buf;
+
+ remain_len = msg->len;
+ wmsg->header.cmd = VPRBRD_I2C_CMD_WRITE;
+ wmsg->header.last = 0x00;
+ wmsg->header.chan = 0x00;
+ wmsg->header.spi = 0x0000;
+ while (remain_len > 0) {
+ wmsg->header.addr = cpu_to_le16(start + 0x4000);
+ if (remain_len > 503) {
+ wmsg->header.len1 = 0xff;
+ wmsg->header.len2 = 0xf8;
+ remain_len -= 503;
+ bytes_xfer = 503 + sizeof(struct vprbrd_i2c_write_hdr);
+ start += 503;
+ } else if (remain_len > 255) {
+ wmsg->header.len1 = 0xff;
+ wmsg->header.len2 = (remain_len - 255);
+ bytes_xfer = remain_len +
+ sizeof(struct vprbrd_i2c_write_hdr);
+ remain_len = 0;
+ } else {
+ wmsg->header.len1 = remain_len;
+ wmsg->header.len2 = 0x00;
+ bytes_xfer = remain_len +
+ sizeof(struct vprbrd_i2c_write_hdr);
+ remain_len = 0;
+ }
+ memcpy(wmsg->data, msg->buf + start,
+ bytes_xfer - sizeof(struct vprbrd_i2c_write_hdr));
+
+ ret = usb_bulk_msg(vb->usb_dev,
+ usb_sndbulkpipe(vb->usb_dev,
+ VPRBRD_EP_OUT), wmsg,
+ bytes_xfer, &bytes_actual, VPRBRD_USB_TIMEOUT_MS);
+ if ((ret < 0) || (bytes_xfer != bytes_actual))
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int vprbrd_i2c_xfer(struct i2c_adapter *i2c, struct i2c_msg *msgs,
+ int num)
+{
+ struct i2c_msg *pmsg;
+ int i, ret,
+ error = 0;
+ struct vprbrd *vb = (struct vprbrd *)i2c->algo_data;
+ struct vprbrd_i2c_addr_msg *amsg =
+ (struct vprbrd_i2c_addr_msg *)vb->buf;
+ struct vprbrd_i2c_status *smsg = (struct vprbrd_i2c_status *)vb->buf;
+
+ dev_dbg(&i2c->dev, "master xfer %d messages:\n", num);
+
+ for (i = 0 ; i < num ; i++) {
+ pmsg = &msgs[i];
+
+ dev_dbg(&i2c->dev,
+ " %d: %s (flags %d) %d bytes to 0x%02x\n",
+ i, pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->flags, pmsg->len, pmsg->addr);
+
+ /* msgs longer than 2048 bytes are not supported by adapter */
+ if (pmsg->len > 2048)
+ return -EINVAL;
+
+ mutex_lock(&vb->lock);
+ /* directly send the message */
+ if (pmsg->flags & I2C_M_RD) {
+ /* read data */
+ amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+ amsg->unknown2 = 0x00;
+ amsg->unknown3 = 0x00;
+ amsg->addr = pmsg->addr;
+ amsg->unknown1 = 0x01;
+ amsg->len = cpu_to_le16(pmsg->len);
+ /* send the addr and len, we're interested to board */
+ ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+ if (ret < 0)
+ error = ret;
+
+ ret = vprbrd_i2c_read(vb, pmsg);
+ if (ret < 0)
+ error = ret;
+
+ ret = vprbrd_i2c_status(i2c, smsg, error);
+ if (ret < 0)
+ error = ret;
+ /* in case of protocol error, return the error */
+ if (error < 0)
+ goto error;
+ } else {
+ /* write data */
+ ret = vprbrd_i2c_write(vb, pmsg);
+
+ amsg->cmd = VPRBRD_I2C_CMD_ADDR;
+ amsg->unknown2 = 0x00;
+ amsg->unknown3 = 0x00;
+ amsg->addr = pmsg->addr;
+ amsg->unknown1 = 0x00;
+ amsg->len = cpu_to_le16(pmsg->len);
+ /* send the addr, the data goes to to board */
+ ret = vprbrd_i2c_addr(vb->usb_dev, amsg);
+ if (ret < 0)
+ error = ret;
+
+ ret = vprbrd_i2c_status(i2c, smsg, error);
+ if (ret < 0)
+ error = ret;
+
+ if (error < 0)
+ goto error;
+ }
+ mutex_unlock(&vb->lock);
+ }
+ return 0;
+error:
+ mutex_unlock(&vb->lock);
+ return error;
+}
+
+static u32 vprbrd_i2c_func(struct i2c_adapter *i2c)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+/* This is the actual algorithm we define */
+static const struct i2c_algorithm vprbrd_algorithm = {
+ .master_xfer = vprbrd_i2c_xfer,
+ .functionality = vprbrd_i2c_func,
+};
+
+static int __devinit vprbrd_i2c_probe(struct platform_device *pdev)
+{
+ struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent);
+ struct vprbrd_i2c *vb_i2c;
+ int ret;
+ int pipe;
+
+ vb_i2c = kzalloc(sizeof(*vb_i2c), GFP_KERNEL);
+ if (vb_i2c == NULL)
+ return -ENOMEM;
+
+ /* setup i2c adapter description */
+ vb_i2c->i2c.owner = THIS_MODULE;
+ vb_i2c->i2c.class = I2C_CLASS_HWMON;
+ vb_i2c->i2c.algo = &vprbrd_algorithm;
+ vb_i2c->i2c.algo_data = vb;
+ /* save the param in usb capabable memory */
+ vb_i2c->bus_freq_param = i2c_bus_param;
+
+ snprintf(vb_i2c->i2c.name, sizeof(vb_i2c->i2c.name),
+ "viperboard at bus %03d device %03d",
+ vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
+
+ /* setting the bus frequency */
+ if ((i2c_bus_param <= VPRBRD_I2C_FREQ_10KHZ)
+ && (i2c_bus_param >= VPRBRD_I2C_FREQ_6MHZ)) {
+ pipe = usb_sndctrlpipe(vb->usb_dev, 0);
+ ret = usb_control_msg(vb->usb_dev, pipe,
+ VPRBRD_USB_REQUEST_I2C_FREQ, VPRBRD_USB_TYPE_OUT,
+ 0x0000, 0x0000, &vb_i2c->bus_freq_param, 1,
+ VPRBRD_USB_TIMEOUT_MS);
+ if (ret != 1) {
+ dev_err(&pdev->dev,
+ "failure setting i2c_bus_freq to %d\n", i2c_bus_freq);
+ ret = -EIO;
+ goto error;
+ }
+ } else {
+ dev_err(&pdev->dev,
+ "invalid i2c_bus_freq setting:%d\n", i2c_bus_freq);
+ ret = -EIO;
+ goto error;
+ }
+
+ vb_i2c->i2c.dev.parent = &pdev->dev;
+
+ /* attach to i2c layer */
+ i2c_add_adapter(&vb_i2c->i2c);
+
+ platform_set_drvdata(pdev, vb_i2c);
+
+ return 0;
+
+error:
+ kfree(vb_i2c);
+ return ret;
+}
+
+static int __devexit vprbrd_i2c_remove(struct platform_device *pdev)
+{
+ struct vprbrd_i2c *vb_i2c = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = i2c_del_adapter(&vb_i2c->i2c);
+
+ return ret;
+}
+
+static struct platform_driver vprbrd_i2c_driver = {
+ .driver.name = "viperboard-i2c",
+ .driver.owner = THIS_MODULE,
+ .probe = vprbrd_i2c_probe,
+ .remove = __devexit_p(vprbrd_i2c_remove),
+};
+
+static int __init vprbrd_i2c_init(void)
+{
+ switch (i2c_bus_freq) {
+ case 6000:
+ i2c_bus_param = VPRBRD_I2C_FREQ_6MHZ;
+ break;
+ case 3000:
+ i2c_bus_param = VPRBRD_I2C_FREQ_3MHZ;
+ break;
+ case 1000:
+ i2c_bus_param = VPRBRD_I2C_FREQ_1MHZ;
+ break;
+ case 400:
+ i2c_bus_param = VPRBRD_I2C_FREQ_400KHZ;
+ break;
+ case 200:
+ i2c_bus_param = VPRBRD_I2C_FREQ_200KHZ;
+ break;
+ case 100:
+ i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+ break;
+ case 10:
+ i2c_bus_param = VPRBRD_I2C_FREQ_10KHZ;
+ break;
+ default:
+ pr_warn("invalid i2c_bus_freq (%d)\n", i2c_bus_freq);
+ i2c_bus_param = VPRBRD_I2C_FREQ_100KHZ;
+ }
+
+ return platform_driver_register(&vprbrd_i2c_driver);
+}
+subsys_initcall(vprbrd_i2c_init);
+
+static void __exit vprbrd_i2c_exit(void)
+{
+ platform_driver_unregister(&vprbrd_i2c_driver);
+}
+module_exit(vprbrd_i2c_exit);
+
+MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
+MODULE_DESCRIPTION("I2C master driver for Nano River Techs Viperboard");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:viperboard-i2c");
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-07 12:21:32 +0100