summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c52
-rw-r--r--drivers/i2c/busses/Kconfig8
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-gpio.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c4
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c1
-rw-r--r--drivers/i2c/busses/i2c-isa.c192
-rw-r--r--drivers/i2c/busses/i2c-mpc.c11
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c31
-rw-r--r--drivers/i2c/busses/i2c-piix4.c6
-rw-r--r--drivers/i2c/busses/i2c-pxa.c2
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c4
-rw-r--r--drivers/i2c/chips/ds1682.c3
-rw-r--r--drivers/i2c/chips/isp1301_omap.c42
-rw-r--r--drivers/i2c/chips/menelaus.c3
-rw-r--r--drivers/i2c/chips/tps65010.c2
-rw-r--r--drivers/i2c/i2c-core.c10
17 files changed, 95 insertions, 279 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 8a5f5825bb72..7f0a0a62cf60 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -357,13 +357,29 @@ static int sendbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
return wrcount;
}
+static int acknak(struct i2c_adapter *i2c_adap, int is_ack)
+{
+ struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+
+ /* assert: sda is high */
+ if (is_ack) /* send ack */
+ setsda(adap, 0);
+ udelay((adap->udelay + 1) / 2);
+ if (sclhi(adap) < 0) { /* timeout */
+ dev_err(&i2c_adap->dev, "readbytes: ack/nak timeout\n");
+ return -ETIMEDOUT;
+ }
+ scllo(adap);
+ return 0;
+}
+
static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
{
int inval;
int rdcount=0; /* counts bytes read */
- struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
unsigned char *temp = msg->buf;
int count = msg->len;
+ const unsigned flags = msg->flags;
while (count > 0) {
inval = i2c_inb(i2c_adap);
@@ -377,28 +393,12 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
temp++;
count--;
- if (msg->flags & I2C_M_NO_RD_ACK) {
- bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x\n",
- inval);
- continue;
- }
-
- /* assert: sda is high */
- if (count) /* send ack */
- setsda(adap, 0);
- udelay((adap->udelay + 1) / 2);
- bit_dbg(2, &i2c_adap->dev, "i2c_inb: 0x%02x %s\n", inval,
- count ? "A" : "NA");
- if (sclhi(adap)<0) { /* timeout */
- dev_err(&i2c_adap->dev, "readbytes: timeout at ack\n");
- return -ETIMEDOUT;
- };
- scllo(adap);
-
/* Some SMBus transactions require that we receive the
transaction length as the first read byte. */
- if (rdcount == 1 && (msg->flags & I2C_M_RECV_LEN)) {
+ if (rdcount == 1 && (flags & I2C_M_RECV_LEN)) {
if (inval <= 0 || inval > I2C_SMBUS_BLOCK_MAX) {
+ if (!(flags & I2C_M_NO_RD_ACK))
+ acknak(i2c_adap, 0);
dev_err(&i2c_adap->dev, "readbytes: invalid "
"block length (%d)\n", inval);
return -EREMOTEIO;
@@ -409,6 +409,18 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
count += inval;
msg->len += inval;
}
+
+ bit_dbg(2, &i2c_adap->dev, "readbytes: 0x%02x %s\n",
+ inval,
+ (flags & I2C_M_NO_RD_ACK)
+ ? "(no ack/nak)"
+ : (count ? "A" : "NA"));
+
+ if (!(flags & I2C_M_NO_RD_ACK)) {
+ inval = acknak(i2c_adap, count);
+ if (inval < 0)
+ return inval;
+ }
}
return rdcount;
}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 1c77e14480dc..9f3a4cd0b07f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -92,9 +92,9 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537
+ depends on BF534 || BF536 || BF537 || BF54x
help
- This is the TWI I2C device driver for Blackfin 534/536/537.
+ This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi.
@@ -208,6 +208,7 @@ config I2C_PIIX4
ATI IXP400
ATI SB600
ATI SB700
+ ATI SB800
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
@@ -237,9 +238,6 @@ config I2C_IOP3XX
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
-config I2C_ISA
- tristate
-
config I2C_IXP4XX
tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)"
depends on ARCH_IXP4XX
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index a6db4e38bda8..5b752e4e1918 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_I810) += i2c-i810.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
-obj-$(CONFIG_I2C_ISA) += i2c-isa.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index 025f19423faf..44e1cd21bb01 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -147,7 +147,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev)
* The reason to do so is to avoid sysfs names that only make
* sense when there are multiple adapters.
*/
- adap->nr = pdev->id >= 0 ? pdev->id : 0;
+ adap->nr = (pdev->id != -1) ? pdev->id : 0;
ret = i2c_bit_add_numbered_bus(adap);
if (ret)
goto err_add_bus;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 8f5c686123b8..289816db52ae 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -272,11 +272,11 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
if (i == 1) {
- /* Erronenous conditions before transaction:
+ /* Erroneous conditions before transaction:
* Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
errmask = 0x9f;
} else {
- /* Erronenous conditions during transaction:
+ /* Erroneous conditions during transaction:
* Failed, Bus_Err, Dev_Err, Intr */
errmask = 0x1e;
}
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 440342bc62e1..ace644e21b14 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -490,6 +490,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
memcpy(new_adapter->name, pdev->name, strlen(pdev->name));
new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
+ new_adapter->class = I2C_CLASS_HWMON;
new_adapter->dev.parent = &pdev->dev;
new_adapter->nr = pdev->id;
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
deleted file mode 100644
index b0e1370075de..000000000000
--- a/drivers/i2c/busses/i2c-isa.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- i2c-isa.c - an i2c-core-like thing for ISA hardware monitoring chips
- Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
-
- Based on the i2c-isa pseudo-adapter from the lm_sensors project
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This implements an i2c-core-like thing for ISA hardware monitoring
- chips. Such chips are linked to the i2c subsystem for historical
- reasons (because the early ISA hardware monitoring chips such as the
- LM78 had both an I2C and an ISA interface). They used to be
- registered with the main i2c-core, but as a first step in the
- direction of a clean separation between I2C and ISA chip drivers,
- we now have this separate core for ISA ones. It is significantly
- more simple than the real one, of course, because we don't have to
- handle multiple busses: there is only one (fake) ISA adapter.
- It is worth noting that we still rely on i2c-core for some things
- at the moment - but hopefully this won't last. */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
-#include <linux/platform_device.h>
-#include <linux/completion.h>
-
-/* Exported by i2c-core for i2c-isa only */
-extern void i2c_adapter_dev_release(struct device *dev);
-extern struct class i2c_adapter_class;
-
-static u32 isa_func(struct i2c_adapter *adapter);
-
-/* This is the actual algorithm we define */
-static const struct i2c_algorithm isa_algorithm = {
- .functionality = isa_func,
-};
-
-/* There can only be one... */
-static struct i2c_adapter isa_adapter = {
- .owner = THIS_MODULE,
- .id = I2C_HW_ISA,
- .class = I2C_CLASS_HWMON,
- .algo = &isa_algorithm,
- .name = "ISA main adapter",
-};
-
-/* We can't do a thing... */
-static u32 isa_func(struct i2c_adapter *adapter)
-{
- return 0;
-}
-
-
-/* We implement an interface which resembles i2c_{add,del}_driver,
- but for i2c-isa drivers. We don't have to remember and handle lists
- of drivers and adapters so this is much more simple, of course. */
-
-int i2c_isa_add_driver(struct i2c_driver *driver)
-{
- int res;
-
- /* Add the driver to the list of i2c drivers in the driver core */
- driver->driver.bus = &i2c_bus_type;
- res = driver_register(&driver->driver);
- if (res)
- return res;
- dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->driver.name);
-
- /* Now look for clients */
- res = driver->attach_adapter(&isa_adapter);
- if (res) {
- dev_dbg(&isa_adapter.dev,
- "Driver %s failed to attach adapter, unregistering\n",
- driver->driver.name);
- driver_unregister(&driver->driver);
- }
- return res;
-}
-
-int i2c_isa_del_driver(struct i2c_driver *driver)
-{
- struct list_head *item, *_n;
- struct i2c_client *client;
- int res;
-
- /* Detach all clients belonging to this one driver */
- list_for_each_safe(item, _n, &isa_adapter.clients) {
- client = list_entry(item, struct i2c_client, list);
- if (client->driver != driver)
- continue;
- dev_dbg(&isa_adapter.dev, "Detaching client %s at 0x%x\n",
- client->name, client->addr);
- if ((res = driver->detach_client(client))) {
- dev_err(&isa_adapter.dev, "Failed, driver "
- "%s not unregistered!\n",
- driver->driver.name);
- return res;
- }
- }
-
- /* Get the driver off the core list */
- driver_unregister(&driver->driver);
- dev_dbg(&isa_adapter.dev, "Driver %s unregistered\n", driver->driver.name);
-
- return 0;
-}
-
-
-static int __init i2c_isa_init(void)
-{
- int err;
-
- mutex_init(&isa_adapter.clist_lock);
- INIT_LIST_HEAD(&isa_adapter.clients);
-
- isa_adapter.nr = ANY_I2C_ISA_BUS;
- isa_adapter.dev.parent = &platform_bus;
- sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr);
- isa_adapter.dev.release = &i2c_adapter_dev_release;
- isa_adapter.dev.class = &i2c_adapter_class;
- err = device_register(&isa_adapter.dev);
- if (err) {
- printk(KERN_ERR "i2c-isa: Failed to register device\n");
- goto exit;
- }
-
- dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name);
-
- return 0;
-
-exit:
- return err;
-}
-
-static void __exit i2c_isa_exit(void)
-{
-#ifdef DEBUG
- struct list_head *item, *_n;
- struct i2c_client *client = NULL;
-#endif
-
- /* There should be no more active client */
-#ifdef DEBUG
- dev_dbg(&isa_adapter.dev, "Looking for clients\n");
- list_for_each_safe(item, _n, &isa_adapter.clients) {
- client = list_entry(item, struct i2c_client, list);
- dev_err(&isa_adapter.dev, "Driver %s still has an active "
- "ISA client at 0x%x\n", client->driver->driver.name,
- client->addr);
- }
- if (client != NULL)
- return;
-#endif
-
- /* Clean up the sysfs representation */
- dev_dbg(&isa_adapter.dev, "Unregistering from sysfs\n");
- init_completion(&isa_adapter.dev_released);
- device_unregister(&isa_adapter.dev);
-
- /* Wait for sysfs to drop all references */
- dev_dbg(&isa_adapter.dev, "Waiting for sysfs completion\n");
- wait_for_completion(&isa_adapter.dev_released);
-
- dev_dbg(&isa_adapter.dev, "%s unregistered\n", isa_adapter.name);
-}
-
-EXPORT_SYMBOL(i2c_isa_add_driver);
-EXPORT_SYMBOL(i2c_isa_del_driver);
-
-MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
-MODULE_DESCRIPTION("ISA bus access through i2c");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_isa_init);
-module_exit(i2c_isa_exit);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 851c3ed513d0..d8de4ac88b7d 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -105,6 +105,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
schedule();
if (time_after(jiffies, orig_jiffies + timeout)) {
pr_debug("I2C: timeout\n");
+ writeccr(i2c, 0);
result = -EIO;
break;
}
@@ -116,10 +117,12 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
result = wait_event_interruptible_timeout(i2c->queue,
(i2c->interrupt & CSR_MIF), timeout * HZ);
- if (unlikely(result < 0))
+ if (unlikely(result < 0)) {
pr_debug("I2C: wait interrupted\n");
- else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
+ writeccr(i2c, 0);
+ } else if (unlikely(!(i2c->interrupt & CSR_MIF))) {
pr_debug("I2C: wait timeout\n");
+ writeccr(i2c, 0);
result = -ETIMEDOUT;
}
@@ -172,7 +175,6 @@ static void mpc_i2c_start(struct mpc_i2c *i2c)
static void mpc_i2c_stop(struct mpc_i2c *i2c)
{
writeccr(i2c, CCR_MEN);
- writeccr(i2c, 0);
}
static int mpc_write(struct mpc_i2c *i2c, int target,
@@ -261,6 +263,7 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) {
if (signal_pending(current)) {
pr_debug("I2C: Interrupted\n");
+ writeccr(i2c, 0);
return -EINTR;
}
if (time_after(jiffies, orig_jiffies + HZ)) {
@@ -362,7 +365,7 @@ static int fsl_i2c_probe(struct platform_device *pdev)
fail_add:
if (i2c->irq != 0)
- free_irq(i2c->irq, NULL);
+ free_irq(i2c->irq, i2c);
fail_irq:
iounmap(i2c->base);
fail_map:
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 251154ae5d97..bb7bf68a7fb6 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -107,6 +107,21 @@ struct mv64xxx_i2c_data {
*
*****************************************************************************
*/
+
+/* Reset hardware and initialize FSM */
+static void
+mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
+{
+ writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET);
+ writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
+ drv_data->reg_base + MV64XXX_I2C_REG_BAUD);
+ writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR);
+ writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR);
+ writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
+ drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->state = MV64XXX_I2C_STATE_IDLE;
+}
+
static void
mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
{
@@ -203,7 +218,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
drv_data->state, status, drv_data->msg->addr,
drv_data->msg->flags);
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
- drv_data->state = MV64XXX_I2C_STATE_IDLE;
+ mv64xxx_i2c_hw_init(drv_data);
drv_data->rc = -EIO;
}
}
@@ -367,6 +382,7 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
"mv64xxx: I2C bus locked, block: %d, "
"time_left: %d\n", drv_data->block,
(int)time_left);
+ mv64xxx_i2c_hw_init(drv_data);
}
} else
spin_unlock_irqrestore(&drv_data->lock, flags);
@@ -443,19 +459,6 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
*
*****************************************************************************
*/
-static void __devinit
-mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
-{
- writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET);
- writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
- drv_data->reg_base + MV64XXX_I2C_REG_BAUD);
- writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR);
- writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR);
- writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
- drv_data->state = MV64XXX_I2C_STATE_IDLE;
-}
-
static int __devinit
mv64xxx_i2c_map_regs(struct platform_device *pd,
struct mv64xxx_i2c_data *drv_data)
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index debc76cd2161..167e4137ee21 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -23,7 +23,7 @@
Supports:
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000
- ATI IXP200, IXP300, IXP400, SB600, SB700
+ ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface.
@@ -397,9 +397,7 @@ static struct pci_device_id piix4_ids[] = {
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS),
.driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS),
- .driver_data = 0 },
- { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SMBUS),
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS),
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
.driver_data = 0 },
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 9d6b790d4321..bb5466b27b59 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -926,7 +926,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
* The reason to do so is to avoid sysfs names that only make
* sense when there are multiple adapters.
*/
- i2c->adap.nr = dev->id >= 0 ? dev->id : 0;
+ i2c->adap.nr = dev->id != -1 ? dev->id : 0;
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e4540fcf6476..c44ada5f4292 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -39,8 +39,8 @@
#include <asm/io.h>
#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-iic.h>
-#include <asm/arch/iic.h>
+#include <asm/plat-s3c/regs-iic.h>
+#include <asm/plat-s3c/iic.h>
/* i2c controller state */
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c
index 5879f0f25495..9e94542c18a2 100644
--- a/drivers/i2c/chips/ds1682.c
+++ b/drivers/i2c/chips/ds1682.c
@@ -75,7 +75,8 @@ static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
/* Special case: the 32 bit regs are time values with 1/4s
* resolution, scale them up to milliseconds */
if (sattr->nr == 4)
- return sprintf(buf, "%llu\n", ((u64) le32_to_cpu(val)) * 250);
+ return sprintf(buf, "%llu\n",
+ ((unsigned long long)le32_to_cpu(val)) * 250);
/* Format the output string and return # of bytes */
return sprintf(buf, "%li\n", (long)le32_to_cpu(val));
diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c
index 9fafadb92510..fe04e46991aa 100644
--- a/drivers/i2c/chips/isp1301_omap.c
+++ b/drivers/i2c/chips/isp1301_omap.c
@@ -18,8 +18,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#undef DEBUG
-#undef VERBOSE
#include <linux/kernel.h>
#include <linux/module.h>
@@ -44,7 +42,7 @@
#define DRIVER_VERSION "24 August 2004"
-#define DRIVER_NAME (isp1301_driver.name)
+#define DRIVER_NAME (isp1301_driver.driver.name)
MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
MODULE_LICENSE("GPL");
@@ -55,6 +53,7 @@ struct isp1301 {
void (*i2c_release)(struct device *dev);
int irq;
+ int irq_type;
u32 last_otg_ctrl;
unsigned working:1;
@@ -63,7 +62,7 @@ struct isp1301 {
/* use keventd context to change the state for us */
struct work_struct work;
-
+
unsigned long todo;
# define WORK_UPDATE_ISP 0 /* update ISP from OTG */
# define WORK_UPDATE_OTG 1 /* update OTG from ISP */
@@ -94,7 +93,7 @@ struct isp1301 {
/* board-specific PM hooks */
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
#include <asm/arch/mux.h>
#include <asm/mach-types.h>
@@ -291,7 +290,7 @@ static void power_up(struct isp1301 *isp)
{
// isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND_REG);
-
+
/* do this only when cpu is driving transceiver,
* so host won't see a low speed device...
*/
@@ -799,7 +798,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
/* role is host */
} else {
if (!(otg_ctrl & OTG_ID)) {
- otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+ otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
OTG_CTRL_REG = otg_ctrl | OTG_A_BUSREQ;
}
@@ -1100,9 +1099,9 @@ static u8 isp1301_clear_latch(struct isp1301 *isp)
}
static void
-isp1301_work(void *data)
+isp1301_work(struct work_struct *work)
{
- struct isp1301 *isp = data;
+ struct isp1301 *isp = container_of(work, struct isp1301, work);
int stop;
/* implicit lock: we're the only task using this device */
@@ -1244,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c)
* - DEVICE mode, for when there's a B/Mini-B (device) connector
*
* As a rule, you won't have an isp1301 chip unless it's there to
- * support the OTG mode. Other modes help testing USB controllers
+ * support the OTG mode. Other modes help testing USB controllers
* in isolation from (full) OTG support, or maybe so later board
* revisions can help to support those feature.
*/
@@ -1260,9 +1259,9 @@ static int isp1301_otg_enable(struct isp1301 *isp)
* a few more interrupts than are strictly needed.
*/
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
- INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+ INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
- INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+ INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
dev_info(&isp->client.dev, "ready for dual-role USB ...\n");
@@ -1306,9 +1305,9 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host)
dev_info(&isp->client.dev, "A-Host sessions ok\n");
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
- INTR_ID_GND);
+ INTR_ID_GND);
isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
- INTR_ID_GND);
+ INTR_ID_GND);
/* If this has a Mini-AB connector, this mode is highly
* nonstandard ... but can be handy for testing, especially with
@@ -1368,9 +1367,9 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
- INTR_SESS_VLD);
+ INTR_SESS_VLD);
isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
- INTR_VBUS_VLD);
+ INTR_VBUS_VLD);
dev_info(&isp->client.dev, "B-Peripheral sessions ok\n");
dump_regs(isp, __FUNCTION__);
@@ -1494,7 +1493,7 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind)
if (!isp)
return 0;
- INIT_WORK(&isp->work, isp1301_work, isp);
+ INIT_WORK(&isp->work, isp1301_work);
init_timer(&isp->timer);
isp->timer.function = isp1301_timer;
isp->timer.data = (unsigned long) isp;
@@ -1572,13 +1571,14 @@ fail1:
/* IRQ wired at M14 */
omap_cfg_reg(M14_1510_GPIO2);
isp->irq = OMAP_GPIO_IRQ(2);
- omap_request_gpio(2);
- omap_set_gpio_direction(2, 1);
- omap_set_gpio_edge_ctrl(2, OMAP_GPIO_FALLING_EDGE);
+ if (gpio_request(2, "isp1301") == 0)
+ gpio_direction_input(2);
+ isp->irq_type = IRQF_TRIGGER_FALLING;
}
+ isp->irq_type |= IRQF_SAMPLE_RANDOM;
status = request_irq(isp->irq, isp1301_irq,
- IRQF_SAMPLE_RANDOM, DRIVER_NAME, isp);
+ isp->irq_type, DRIVER_NAME, isp);
if (status < 0) {
dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
isp->irq, status);
diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index 48a7e2f0bdd3..d9c92c5e0077 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -1,4 +1,3 @@
-#define DEBUG
/*
* Copyright (C) 2004 Texas Instruments, Inc.
*
@@ -933,7 +932,7 @@ static int menelaus_set_time(struct device *dev, struct rtc_time *t)
return status;
status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday));
if (status < 0) {
- dev_err(&the_menelaus->client->dev, "rtc write reg %02x",
+ dev_err(&the_menelaus->client->dev, "rtc write reg %02x "
"err %d\n", MENELAUS_RTC_WKDAY, status);
return status;
}
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index 3c3f2ebf3fc9..503ffec2ce07 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -352,7 +352,7 @@ static void tps65010_interrupt(struct tps65010 *tps)
/* REVISIT: this might need its own workqueue
* plus tweaks including deadlock avoidance ...
* also needs to get error handling and probably
- * an #ifdef CONFIG_SOFTWARE_SUSPEND
+ * an #ifdef CONFIG_HIBERNATION
*/
hibernate();
#endif
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 6971a62397db..910a62de190d 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -67,20 +67,16 @@ static int i2c_device_match(struct device *dev, struct device_driver *drv)
#ifdef CONFIG_HOTPLUG
/* uevent helps with hotplug: modprobe -q $(MODALIAS) */
-static int i2c_device_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
+static int i2c_device_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct i2c_client *client = to_i2c_client(dev);
- int i = 0, length = 0;
/* by definition, legacy drivers can't hotplug */
if (dev->driver || !client->driver_name)
return 0;
- if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length,
- "MODALIAS=%s", client->driver_name))
+ if (add_uevent_var(env, "MODALIAS=%s", client->driver_name))
return -ENOMEM;
- envp[i] = NULL;
dev_dbg(dev, "uevent\n");
return 0;
}
@@ -288,7 +284,6 @@ void i2c_adapter_dev_release(struct device *dev)
struct i2c_adapter *adap = to_i2c_adapter(dev);
complete(&adap->dev_released);
}
-EXPORT_SYMBOL_GPL(i2c_adapter_dev_release); /* exported to i2c-isa */
static ssize_t
show_adapter_name(struct device *dev, struct device_attribute *attr, char *buf)
@@ -307,7 +302,6 @@ struct class i2c_adapter_class = {
.name = "i2c-adapter",
.dev_attrs = i2c_adapter_attrs,
};
-EXPORT_SYMBOL_GPL(i2c_adapter_class); /* exported to i2c-isa */
static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
{
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 21:04:14 +0100