diff options
Diffstat (limited to 'drivers/i2c')
39 files changed, 1388 insertions, 1575 deletions
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index c034820615bb..af0203409dd1 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -38,17 +38,6 @@ config I2C_ALGOPCA This support is also available as a module. If so, the module will be called i2c-algo-pca. -config I2C_ALGOITE - tristate "ITE I2C Algorithm" - depends on MIPS_ITE8172 && I2C - help - This supports the use of the ITE8172 I2C interface found on some MIPS - systems. Say Y if you have one of these. You should also say Y for - the ITE I2C peripheral driver support below. - - This support is also available as a module. If so, the module - will be called i2c-algo-ite. - config I2C_ALGO8XX tristate "MPC8xx CPM I2C interface" depends on 8xx && I2C diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile index 208be04a3dbd..cac1051bd4f1 100644 --- a/drivers/i2c/algos/Makefile +++ b/drivers/i2c/algos/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o obj-$(CONFIG_I2C_ALGOPCA) += i2c-algo-pca.o -obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o ifeq ($(CONFIG_I2C_DEBUG_ALGO),y) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 21c36bfb5e6b..95aa5395a5be 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -540,15 +540,7 @@ int i2c_bit_add_bus(struct i2c_adapter *adap) return i2c_add_adapter(adap); } - - -int i2c_bit_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_bit_add_bus); -EXPORT_SYMBOL(i2c_bit_del_bus); MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>"); MODULE_DESCRIPTION("I2C-Bus bit-banging algorithm"); diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c deleted file mode 100644 index 70d8eefb5efc..000000000000 --- a/drivers/i2c/algos/i2c-algo-ite.c +++ /dev/null @@ -1,806 +0,0 @@ -/* - ------------------------------------------------------------------------- - i2c-algo-ite.c i2c driver algorithms for ITE adapters - - Hai-Pao Fan, MontaVista Software, Inc. - hpfan@mvista.com or source@mvista.com - - Copyright 2000 MontaVista Software Inc. - - --------------------------------------------------------------------------- - This file was highly leveraged from i2c-algo-pcf.c, which was created - by Simon G. Vogl and Hans Berglund: - - - Copyright (C) 1995-1997 Simon G. Vogl - 1998-2000 Hans Berglund - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and - Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey - <mbailey@littlefeet-inc.com> */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <asm/uaccess.h> -#include <linux/ioport.h> -#include <linux/errno.h> -#include <linux/sched.h> - -#include <linux/i2c.h> -#include <linux/i2c-algo-ite.h> -#include "i2c-algo-ite.h" - -#define PM_DSR IT8172_PCI_IO_BASE + IT_PM_DSR -#define PM_IBSR IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04 -#define GPIO_CCR IT8172_PCI_IO_BASE + IT_GPCCR - -#define DEB2(x) if (i2c_debug>=2) x -#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/ -#define DEF_TIMEOUT 16 - - -/* module parameters: - */ -static int i2c_debug; -static int iic_test; /* see if the line-setting functions work */ - -/* --- setting states on the bus with the right timing: --------------- */ - -#define get_clock(adap) adap->getclock(adap->data) -#define iic_outw(adap, reg, val) adap->setiic(adap->data, reg, val) -#define iic_inw(adap, reg) adap->getiic(adap->data, reg) - - -/* --- other auxiliary functions -------------------------------------- */ - -static void iic_start(struct i2c_algo_iic_data *adap) -{ - iic_outw(adap,ITE_I2CHCR,ITE_CMD); -} - -static void iic_stop(struct i2c_algo_iic_data *adap) -{ - iic_outw(adap,ITE_I2CHCR,0); - iic_outw(adap,ITE_I2CHSR,ITE_I2CHSR_TDI); -} - -static void iic_reset(struct i2c_algo_iic_data *adap) -{ - iic_outw(adap, PM_IBSR, iic_inw(adap, PM_IBSR) | 0x80); -} - - -static int wait_for_bb(struct i2c_algo_iic_data *adap) -{ - int timeout = DEF_TIMEOUT; - short status; - - status = iic_inw(adap, ITE_I2CHSR); -#ifndef STUB_I2C - while (timeout-- && (status & ITE_I2CHSR_HB)) { - udelay(1000); /* How much is this? */ - status = iic_inw(adap, ITE_I2CHSR); - } -#endif - if (timeout<=0) { - printk(KERN_ERR "Timeout, host is busy\n"); - iic_reset(adap); - } - return(timeout<=0); -} - -/* After we issue a transaction on the IIC bus, this function - * is called. It puts this process to sleep until we get an interrupt from - * from the controller telling us that the transaction we requested in complete. - */ -static int wait_for_pin(struct i2c_algo_iic_data *adap, short *status) { - - int timeout = DEF_TIMEOUT; - - timeout = wait_for_bb(adap); - if (timeout) { - DEB2(printk("Timeout waiting for host not busy\n");) - return -EIO; - } - timeout = DEF_TIMEOUT; - - *status = iic_inw(adap, ITE_I2CHSR); -#ifndef STUB_I2C - while (timeout-- && !(*status & ITE_I2CHSR_TDI)) { - adap->waitforpin(); - *status = iic_inw(adap, ITE_I2CHSR); - } -#endif - if (timeout <= 0) - return(-1); - else - return(0); -} - -static int wait_for_fe(struct i2c_algo_iic_data *adap, short *status) -{ - int timeout = DEF_TIMEOUT; - - *status = iic_inw(adap, ITE_I2CFSR); -#ifndef STUB_I2C - while (timeout-- && (*status & ITE_I2CFSR_FE)) { - udelay(1000); - iic_inw(adap, ITE_I2CFSR); - } -#endif - if (timeout <= 0) - return(-1); - else - return(0); -} - -static int iic_init (struct i2c_algo_iic_data *adap) -{ - short i; - - /* Clear bit 7 to set I2C to normal operation mode */ - i=iic_inw(adap, PM_DSR)& 0xff7f; - iic_outw(adap, PM_DSR, i); - - /* set IT_GPCCR port C bit 2&3 as function 2 */ - i = iic_inw(adap, GPIO_CCR) & 0xfc0f; - iic_outw(adap,GPIO_CCR,i); - - /* Clear slave address/sub-address */ - iic_outw(adap,ITE_I2CSAR, 0); - iic_outw(adap,ITE_I2CSSAR, 0); - - /* Set clock counter register */ - iic_outw(adap,ITE_I2CCKCNT, get_clock(adap)); - - /* Set START/reSTART/STOP time registers */ - iic_outw(adap,ITE_I2CSHDR, 0x0a); - iic_outw(adap,ITE_I2CRSUR, 0x0a); - iic_outw(adap,ITE_I2CPSUR, 0x0a); - - /* Enable interrupts on completing the current transaction */ - iic_outw(adap,ITE_I2CHCR, ITE_I2CHCR_IE | ITE_I2CHCR_HCE); - - /* Clear transfer count */ - iic_outw(adap,ITE_I2CFBCR, 0x0); - - DEB2(printk("iic_init: Initialized IIC on ITE 0x%x\n", - iic_inw(adap, ITE_I2CHSR))); - return 0; -} - - -/* - * Sanity check for the adapter hardware - check the reaction of - * the bus lines only if it seems to be idle. - */ -static int test_bus(struct i2c_algo_iic_data *adap, char *name) { -#if 0 - int scl,sda; - sda=getsda(adap); - if (adap->getscl==NULL) { - printk("test_bus: Warning: Adapter can't read from clock line - skipping test.\n"); - return 0; - } - scl=getscl(adap); - printk("test_bus: Adapter: %s scl: %d sda: %d -- testing...\n", - name,getscl(adap),getsda(adap)); - if (!scl || !sda ) { - printk("test_bus: %s seems to be busy.\n",adap->name); - goto bailout; - } - sdalo(adap); - printk("test_bus:1 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 != getsda(adap) ) { - printk("test_bus: %s SDA stuck high!\n",name); - sdahi(adap); - goto bailout; - } - if ( 0 == getscl(adap) ) { - printk("test_bus: %s SCL unexpected low while pulling SDA low!\n", - name); - goto bailout; - } - sdahi(adap); - printk("test_bus:2 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 == getsda(adap) ) { - printk("test_bus: %s SDA stuck low!\n",name); - sdahi(adap); - goto bailout; - } - if ( 0 == getscl(adap) ) { - printk("test_bus: %s SCL unexpected low while SDA high!\n", - adap->name); - goto bailout; - } - scllo(adap); - printk("test_bus:3 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 != getscl(adap) ) { - - sclhi(adap); - goto bailout; - } - if ( 0 == getsda(adap) ) { - printk("test_bus: %s SDA unexpected low while pulling SCL low!\n", - name); - goto bailout; - } - sclhi(adap); - printk("test_bus:4 scl: %d sda: %d\n", getscl(adap), - getsda(adap)); - if ( 0 == getscl(adap) ) { - printk("test_bus: %s SCL stuck low!\n",name); - sclhi(adap); - goto bailout; - } - if ( 0 == getsda(adap) ) { - printk("test_bus: %s SDA unexpected low while SCL high!\n", - name); - goto bailout; - } - printk("test_bus: %s passed test.\n",name); - return 0; -bailout: - sdahi(adap); - sclhi(adap); - return -ENODEV; -#endif - return (0); -} - -/* ----- Utility functions - */ - - -/* Verify the device we want to talk to on the IIC bus really exists. */ -static inline int try_address(struct i2c_algo_iic_data *adap, - unsigned int addr, int retries) -{ - int i, ret = -1; - short status; - - for (i=0;i<retries;i++) { - iic_outw(adap, ITE_I2CSAR, addr); - iic_start(adap); - if (wait_for_pin(adap, &status) == 0) { - if ((status & ITE_I2CHSR_DNE) == 0) { - iic_stop(adap); - iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH); - ret=1; - break; /* success! */ - } - } - iic_stop(adap); - udelay(adap->udelay); - } - DEB2(if (i) printk("try_address: needed %d retries for 0x%x\n",i, - addr)); - return ret; -} - - -static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf, - int count) -{ - struct i2c_algo_iic_data *adap = i2c_adap->algo_data; - int wrcount=0, timeout; - short status; - int loops, remainder, i, j; - union { - char byte[2]; - unsigned short word; - } tmp; - - iic_outw(adap, ITE_I2CSSAR, (unsigned short)buf[wrcount++]); - count--; - if (count == 0) - return -EIO; - - loops = count / 32; /* 32-byte FIFO */ - remainder = count % 32; - - if(loops) { - for(i=0; i<loops; i++) { - - iic_outw(adap, ITE_I2CFBCR, 32); - for(j=0; j<32/2; j++) { - tmp.byte[1] = buf[wrcount++]; - tmp.byte[0] = buf[wrcount++]; - iic_outw(adap, ITE_I2CFDR, tmp.word); - } - - /* status FIFO overrun */ - iic_inw(adap, ITE_I2CFSR); - iic_inw(adap, ITE_I2CFBCR); - - iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */ - - /* Wait for transmission to complete */ - timeout = wait_for_pin(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name); - return -EREMOTEIO; /* got a better one ?? */ - } - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name); - return -EREMOTEIO; /* got a better one ?? */ - } - } - } - if(remainder) { - iic_outw(adap, ITE_I2CFBCR, remainder); - for(i=0; i<remainder/2; i++) { - tmp.byte[1] = buf[wrcount++]; - tmp.byte[0] = buf[wrcount++]; - iic_outw(adap, ITE_I2CFDR, tmp.word); - } - - /* status FIFO overrun */ - iic_inw(adap, ITE_I2CFSR); - iic_inw(adap, ITE_I2CFBCR); - - iic_outw(adap, ITE_I2CHCR, ITE_WRITE); /* Issue WRITE command */ - - timeout = wait_for_pin(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_sendbytes: %s write timeout.\n", i2c_adap->name); - return -EREMOTEIO; /* got a better one ?? */ - } -#ifndef STUB_I2C - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_sendbytes: %s write error - no ack.\n", i2c_adap->name); - return -EREMOTEIO; /* got a better one ?? */ - } -#endif - } - iic_stop(adap); - return wrcount; -} - - -static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count, - int sread) -{ - int rdcount=0, i, timeout; - short status; - struct i2c_algo_iic_data *adap = i2c_adap->algo_data; - int loops, remainder, j; - union { - char byte[2]; - unsigned short word; - } tmp; - - loops = count / 32; /* 32-byte FIFO */ - remainder = count % 32; - - if(loops) { - for(i=0; i<loops; i++) { - iic_outw(adap, ITE_I2CFBCR, 32); - if (sread) - iic_outw(adap, ITE_I2CHCR, ITE_SREAD); - else - iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */ - - timeout = wait_for_pin(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_readbytes: %s read timeout.\n", i2c_adap->name); - return (-1); - } -#ifndef STUB_I2C - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name); - return (-1); - } -#endif - - timeout = wait_for_fe(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name); - return (-1); - } - - for(j=0; j<32/2; j++) { - tmp.word = iic_inw(adap, ITE_I2CFDR); - buf[rdcount++] = tmp.byte[1]; - buf[rdcount++] = tmp.byte[0]; - } - - /* status FIFO underrun */ - iic_inw(adap, ITE_I2CFSR); - - } - } - - - if(remainder) { - remainder=(remainder+1)/2 * 2; - iic_outw(adap, ITE_I2CFBCR, remainder); - if (sread) - iic_outw(adap, ITE_I2CHCR, ITE_SREAD); - else - iic_outw(adap, ITE_I2CHCR, ITE_READ); /* Issue READ command */ - - timeout = wait_for_pin(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_readbytes: %s read timeout.\n", i2c_adap->name); - return (-1); - } -#ifndef STUB_I2C - if (status & ITE_I2CHSR_DB) { - iic_stop(adap); - printk("iic_readbytes: %s read error - no ack.\n", i2c_adap->name); - return (-1); - } -#endif - timeout = wait_for_fe(adap, &status); - if(timeout) { - iic_stop(adap); - printk("iic_readbytes: %s FIFO is empty\n", i2c_adap->name); - return (-1); - } - - for(i=0; i<(remainder+1)/2; i++) { - tmp.word = iic_inw(adap, ITE_I2CFDR); - buf[rdcount++] = tmp.byte[1]; - buf[rdcount++] = tmp.byte[0]; - } - - /* status FIFO underrun */ - iic_inw(adap, ITE_I2CFSR); - - } - - iic_stop(adap); - return rdcount; -} - - -/* This function implements combined transactions. Combined - * transactions consist of combinations of reading and writing blocks of data. - * Each transfer (i.e. a read or a write) is separated by a repeated start - * condition. - */ -#if 0 -static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) -{ - int i; - struct i2c_msg *pmsg; - int ret; - - DEB2(printk("Beginning combined transaction\n")); - - for(i=0; i<(num-1); i++) { - pmsg = &msgs[i]; - if(pmsg->flags & I2C_M_RD) { - DEB2(printk(" This one is a read\n")); - ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER); - } - else if(!(pmsg->flags & I2C_M_RD)) { - DEB2(printk("This one is a write\n")); - ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_COMBINED_XFER); - } - } - /* Last read or write segment needs to be terminated with a stop */ - pmsg = &msgs[i]; - - if(pmsg->flags & I2C_M_RD) { - DEB2(printk("Doing the last read\n")); - ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER); - } - else if(!(pmsg->flags & I2C_M_RD)) { - DEB2(printk("Doing the last write\n")); - ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER); - } - - return ret; -} -#endif - - -/* Whenever we initiate a transaction, the first byte clocked - * onto the bus after the start condition is the address (7 bit) of the - * device we want to talk to. This function manipulates the address specified - * so that it makes sense to the hardware when written to the IIC peripheral. - * - * Note: 10 bit addresses are not supported in this driver, although they are - * supported by the hardware. This functionality needs to be implemented. - */ -static inline int iic_doAddress(struct i2c_algo_iic_data *adap, - struct i2c_msg *msg, int retries) -{ - unsigned short flags = msg->flags; - unsigned int addr; - int ret; - -/* Ten bit addresses not supported right now */ - if ( (flags & I2C_M_TEN) ) { -#if 0 - addr = 0xf0 | (( msg->addr >> 7) & 0x03); - DEB2(printk("addr0: %d\n",addr)); - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk("iic_doAddress: died at extended address code.\n"); - return -EREMOTEIO; - } - iic_outw(adap,msg->addr & 0x7f); - if (ret != 1) { - printk("iic_doAddress: died at 2nd address code.\n"); - return -EREMOTEIO; - } - if ( flags & I2C_M_RD ) { - i2c_repstart(adap); - addr |= 0x01; - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk("iic_doAddress: died at extended address code.\n"); - return -EREMOTEIO; - } - } -#endif - } else { - - addr = ( msg->addr << 1 ); - -#if 0 - if (flags & I2C_M_RD ) - addr |= 1; - if (flags & I2C_M_REV_DIR_ADDR ) - addr ^= 1; -#endif - - if (iic_inw(adap, ITE_I2CSAR) != addr) { - iic_outw(adap, ITE_I2CSAR, addr); - ret = try_address(adap, addr, retries); - if (ret!=1) { - printk("iic_doAddress: died at address code.\n"); - return -EREMOTEIO; - } - } - - } - - return 0; -} - - -/* Description: Prepares the controller for a transaction (clearing status - * registers, data buffers, etc), and then calls either iic_readbytes or - * iic_sendbytes to do the actual transaction. - * - * still to be done: Before we issue a transaction, we should - * verify that the bus is not busy or in some unknown state. - */ -static int iic_xfer(struct i2c_adapter *i2c_adap, - struct i2c_msg *msgs, - int num) -{ - struct i2c_algo_iic_data *adap = i2c_adap->algo_data; - struct i2c_msg *pmsg; - int i = 0; - int ret, timeout; - - pmsg = &msgs[i]; - - if(!pmsg->len) { - DEB2(printk("iic_xfer: read/write length is 0\n");) - return -EIO; - } - if(!(pmsg->flags & I2C_M_RD) && (!(pmsg->len)%2) ) { - DEB2(printk("iic_xfer: write buffer length is not odd\n");) - return -EIO; - } - - /* Wait for any pending transfers to complete */ - timeout = wait_for_bb(adap); - if (timeout) { - DEB2(printk("iic_xfer: Timeout waiting for host not busy\n");) - return -EIO; - } - - /* Flush FIFO */ - iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH); - - /* Load address */ - ret = iic_doAddress(adap, pmsg, i2c_adap->retries); - if (ret) - return -EIO; - -#if 0 - /* Combined transaction (read and write) */ - if(num > 1) { - DEB2(printk("iic_xfer: Call combined transaction\n")); - ret = iic_combined_transaction(i2c_adap, msgs, num); - } -#endif - - DEB3(printk("iic_xfer: Msg %d, addr=0x%x, flags=0x%x, len=%d\n", - i, msgs[i].addr, msgs[i].flags, msgs[i].len);) - - if(pmsg->flags & I2C_M_RD) /* Read */ - ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, 0); - else { /* Write */ - udelay(1000); - ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len); - } - - if (ret != pmsg->len) - DEB3(printk("iic_xfer: error or fail on read/write %d bytes.\n",ret)); - else - DEB3(printk("iic_xfer: read/write %d bytes.\n",ret)); - - return ret; -} - - -/* Implements device specific ioctls. Higher level ioctls can - * be found in i2c-core.c and are typical of any i2c controller (specifying - * slave address, timeouts, etc). These ioctls take advantage of any hardware - * features built into the controller for which this algorithm-adapter set - * was written. These ioctls allow you to take control of the data and clock - * lines and set the either high or low, - * similar to a GPIO pin. - */ -static int algo_control(struct i2c_adapter *adapter, - unsigned int cmd, unsigned long arg) -{ - - struct i2c_algo_iic_data *adap = adapter->algo_data; - struct i2c_iic_msg s_msg; - char *buf; - int ret; - - if (cmd == I2C_SREAD) { - if(copy_from_user(&s_msg, (struct i2c_iic_msg *)arg, - sizeof(struct i2c_iic_msg))) - return -EFAULT; - buf = kmalloc(s_msg.len, GFP_KERNEL); - if (buf== NULL) - return -ENOMEM; - - /* Flush FIFO */ - iic_outw(adap, ITE_I2CFCR, ITE_I2CFCR_FLUSH); - - /* Load address */ - iic_outw(adap, ITE_I2CSAR,s_msg.addr<<1); - iic_outw(adap, ITE_I2CSSAR,s_msg.waddr & 0xff); - - ret = iic_readbytes(adapter, buf, s_msg.len, 1); - if (ret>=0) { - if(copy_to_user( s_msg.buf, buf, s_msg.len) ) - ret = -EFAULT; - } - kfree(buf); - } - return 0; -} - - -static u32 iic_func(struct i2c_adapter *adap) -{ - return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | - I2C_FUNC_PROTOCOL_MANGLING; -} - -/* -----exported algorithm data: ------------------------------------- */ - -static struct i2c_algorithm iic_algo = { - .master_xfer = iic_xfer, - .algo_control = algo_control, /* ioctl */ - .functionality = iic_func, -}; - - -/* - * registering functions to load algorithms at runtime - */ -int i2c_iic_add_bus(struct i2c_adapter *adap) -{ - struct i2c_algo_iic_data *iic_adap = adap->algo_data; - - if (iic_test) { - int ret = test_bus(iic_adap, adap->name); - if (ret<0) - return -ENODEV; - } - - DEB2(printk("i2c-algo-ite: hw routines for %s registered.\n", - adap->name)); - - /* register new adapter to i2c module... */ - adap->algo = &iic_algo; - - adap->timeout = 100; /* default values, should */ - adap->retries = 3; /* be replaced by defines */ - adap->flags = 0; - - iic_init(iic_adap); - return i2c_add_adapter(adap); -} - - -int i2c_iic_del_bus(struct i2c_adapter *adap) -{ - int res; - if ((res = i2c_del_adapter(adap)) < 0) - return res; - DEB2(printk("i2c-algo-ite: adapter unregistered: %s\n",adap->name)); - - return 0; -} - - -int __init i2c_algo_iic_init (void) -{ - printk(KERN_INFO "ITE iic (i2c) algorithm module\n"); - return 0; -} - - -void i2c_algo_iic_exit(void) -{ - return; -} - - -EXPORT_SYMBOL(i2c_iic_add_bus); -EXPORT_SYMBOL(i2c_iic_del_bus); - -/* The MODULE_* macros resolve to nothing if MODULES is not defined - * when this file is compiled. - */ -MODULE_AUTHOR("MontaVista Software <www.mvista.com>"); -MODULE_DESCRIPTION("ITE iic algorithm"); -MODULE_LICENSE("GPL"); - -module_param(iic_test, bool, 0); -module_param(i2c_debug, int, S_IRUGO | S_IWUSR); - -MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available"); -MODULE_PARM_DESC(i2c_debug, - "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol"); - - -/* This function resolves to init_module (the function invoked when a module - * is loaded via insmod) when this file is compiled with MODULES defined. - * Otherwise (i.e. if you want this driver statically linked to the kernel), - * a pointer to this function is stored in a table and called - * during the initialization of the kernel (in do_basic_setup in /init/main.c) - * - * All this functionality is complements of the macros defined in linux/init.h - */ -module_init(i2c_algo_iic_init); - - -/* If MODULES is defined when this file is compiled, then this function will - * resolved to cleanup_module. - */ -module_exit(i2c_algo_iic_exit); diff --git a/drivers/i2c/algos/i2c-algo-ite.h b/drivers/i2c/algos/i2c-algo-ite.h deleted file mode 100644 index a8ca3c9b546a..000000000000 --- a/drivers/i2c/algos/i2c-algo-ite.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - -------------------------------------------------------------------- - i2c-ite.h: Global defines for the I2C controller on board the - ITE MIPS processor. - -------------------------------------------------------------------- - Hai-Pao Fan, MontaVista Software, Inc. - hpfan@mvista.com or source@mvista.com - - Copyright 2001 MontaVista Software Inc. - - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - - */ - -#ifndef I2C_ITE_H -#define I2C_ITE_H 1 - -#include <asm/it8172/it8172.h> - -/* I2C Registers */ -#define ITE_I2CHCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x30 -#define ITE_I2CHSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x34 -#define ITE_I2CSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x38 -#define ITE_I2CSSAR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x3c -#define ITE_I2CCKCNT IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x48 -#define ITE_I2CSHDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x4c -#define ITE_I2CRSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x50 -#define ITE_I2CPSUR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x54 - -#define ITE_I2CFDR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x70 -#define ITE_I2CFBCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x74 -#define ITE_I2CFCR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x78 -#define ITE_I2CFSR IT8172_PCI_IO_BASE + IT_I2C_BASE + 0x7c - - -/* Host Control Register ITE_I2CHCR */ -#define ITE_I2CHCR_HCE 0x01 /* Enable I2C Host Controller */ -#define ITE_I2CHCR_IE 0x02 /* Enable the interrupt after completing - the current transaction */ -#define ITE_I2CHCR_CP_W 0x00 /* bit2-4 000 - Write */ -#define ITE_I2CHCR_CP_R 0x08 /* 010 - Current address read */ -#define ITE_I2CHCR_CP_S 0x10 /* 100 - Sequential read */ -#define ITE_I2CHCR_ST 0x20 /* Initiates the I2C host controller to execute - the command and send the data programmed in - all required registers to I2C bus */ -#define ITE_CMD ITE_I2CHCR_HCE | ITE_I2CHCR_IE | ITE_I2CHCR_ST -#define ITE_WRITE ITE_CMD | ITE_I2CHCR_CP_W -#define ITE_READ ITE_CMD | ITE_I2CHCR_CP_R -#define ITE_SREAD ITE_CMD | ITE_I2CHCR_CP_S - -/* Host Status Register ITE_I2CHSR */ -#define ITE_I2CHSR_DB 0x01 /* Device is busy, receives NACK response except - in the first and last bytes */ -#define ITE_I2CHSR_DNE 0x02 /* Target address on I2C bus does not exist */ -#define ITE_I2CHSR_TDI 0x04 /* R/W Transaction on I2C bus was completed */ -#define ITE_I2CHSR_HB 0x08 /* Host controller is processing transactions */ -#define ITE_I2CHSR_FER 0x10 /* Error occurs in the FIFO */ - -/* Slave Address Register ITE_I2CSAR */ -#define ITE_I2CSAR_SA_MASK 0xfe /* Target I2C device address */ -#define ITE_I2CSAR_ASO 0x0100 /* Output 1/0 to I2CAS port when the - next slave address is addressed */ - -/* Slave Sub-address Register ITE_I2CSSAR */ -#define ITE_I2CSSAR_SUBA_MASK 0xff /* Target I2C device sub-address */ - -/* Clock Counter Register ITE_I2CCKCNT */ -#define ITE_I2CCKCNT_STOP 0x00 /* stop I2C clock */ -#define ITE_I2CCKCNT_HPCC_MASK 0x7f /* SCL high period counter */ -#define ITE_I2CCKCNT_LPCC_MASK 0x7f00 /* SCL low period counter */ - -/* START Hold Time Register ITE_I2CSHDR */ -/* value is counted based on 16 MHz internal clock */ -#define ITE_I2CSHDR_FM 0x0a /* START condition at fast mode */ -#define ITE_I2CSHDR_SM 0x47 /* START contition at standard mode */ - -/* (Repeated) START Setup Time Register ITE_I2CRSUR */ -/* value is counted based on 16 MHz internal clock */ -#define ITE_I2CRSUR_FM 0x0a /* repeated START condition at fast mode */ -#define ITE_I2CRSUR_SM 0x50 /* repeated START condition at standard mode */ - -/* STOP setup Time Register ITE_I2CPSUR */ - -/* FIFO Data Register ITE_I2CFDR */ -#define ITE_I2CFDR_MASK 0xff - -/* FIFO Byte Count Register ITE_I2CFBCR */ -#define ITE_I2CFBCR_MASK 0x3f - -/* FIFO Control Register ITE_I2CFCR */ -#define ITE_I2CFCR_FLUSH 0x01 /* Flush FIFO and reset the FIFO point - and I2CFSR */ -/* FIFO Status Register ITE_I2CFSR */ -#define ITE_I2CFSR_FO 0x01 /* FIFO is overrun when write */ -#define ITE_I2CFSR_FU 0x02 /* FIFO is underrun when read */ -#define ITE_I2CFSR_FF 0x04 /* FIFO is full when write */ -#define ITE_I2CFSR_FE 0x08 /* FIFO is empty when read */ - -#endif /* I2C_ITE_H */ diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 9081c9fbcd29..36fdf971f080 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -381,14 +381,7 @@ int i2c_pca_add_bus(struct i2c_adapter *adap) return rval; } - -int i2c_pca_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_pca_add_bus); -EXPORT_SYMBOL(i2c_pca_del_bus); MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); MODULE_DESCRIPTION("I2C-Bus PCA9564 algorithm"); diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 3b2003398966..ecb2c2d7d540 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -486,15 +486,7 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap) return rval; } - - -int i2c_pcf_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_pcf_add_bus); -EXPORT_SYMBOL(i2c_pcf_del_bus); MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); MODULE_DESCRIPTION("I2C-Bus PCF8584 algorithm"); diff --git a/drivers/i2c/algos/i2c-algo-sgi.c b/drivers/i2c/algos/i2c-algo-sgi.c index 490d99997fd0..ac2d5053078a 100644 --- a/drivers/i2c/algos/i2c-algo-sgi.c +++ b/drivers/i2c/algos/i2c-algo-sgi.c @@ -171,15 +171,7 @@ int i2c_sgi_add_bus(struct i2c_adapter *adap) return i2c_add_adapter(adap); } - - -int i2c_sgi_del_bus(struct i2c_adapter *adap) -{ - return i2c_del_adapter(adap); -} - EXPORT_SYMBOL(i2c_sgi_add_bus); -EXPORT_SYMBOL(i2c_sgi_del_bus); MODULE_AUTHOR("Ladislav Michl <ladis@linux-mips.org>"); MODULE_DESCRIPTION("I2C-Bus SGI algorithm"); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 510816c16da3..e1989f3a2684 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -74,6 +74,13 @@ config I2C_AMD8111 This driver can also be built as a module. If so, the module will be called i2c-amd8111. +config I2C_AT91 + tristate "Atmel AT91 I2C Two-Wire interface (TWI)" + depends on I2C && ARCH_AT91 && EXPERIMENTAL + help + This supports the use of the I2C interface on Atmel AT91 + processors. + config I2C_AU1550 tristate "Au1550/Au1200 SMBus interface" depends on I2C && (SOC_AU1550 || SOC_AU1200) @@ -125,6 +132,7 @@ config I2C_I801 ICH7 ESB2 ICH8 + ICH9 This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -195,11 +203,11 @@ config I2C_IBM_IIC will be called i2c-ibm_iic. config I2C_IOP3XX - tristate "Intel IOP3xx and IXP4xx on-chip I2C interface" - depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX) && I2C + tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" + depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX) && I2C help Say Y here if you want to use the IIC bus controller on - the Intel IOP3xx I/O Processors or IXP4xx Network Processors. + the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. This driver can also be built as a module. If so, the module will be called i2c-iop3xx. @@ -208,18 +216,6 @@ config I2C_ISA tristate depends on I2C -config I2C_ITE - tristate "ITE I2C Adapter" - depends on I2C && MIPS_ITE8172 - select I2C_ALGOITE - help - This supports the ITE8172 I2C peripheral found on some MIPS - systems. Say Y if you have one of these. You should also say Y for - the ITE I2C driver algorithm support above. - - This support is also available as a module. If so, the module - will be called i2c-ite. - config I2C_IXP4XX tristate "IXP4xx GPIO-Based I2C Interface" depends on I2C && ARCH_IXP4XX @@ -480,6 +476,17 @@ config I2C_STUB If you don't know what to do here, definitely say N. +config I2C_VERSATILE + tristate "ARM Versatile/Realview I2C bus support" + depends on I2C && (ARCH_VERSATILE || ARCH_REALVIEW) + select I2C_ALGOBIT + help + Say yes if you want to support the I2C serial bus on ARMs Versatile + range of platforms. + + This driver can also be built as a module. If so, the module + will be called i2c-versatile. + config I2C_VIA tristate "VIA 82C586B" depends on I2C && PCI && EXPERIMENTAL @@ -547,4 +554,23 @@ config I2C_MV64XXX This driver can also be built as a module. If so, the module will be called i2c-mv64xxx. +config I2C_PNX + tristate "I2C bus support for Philips PNX targets" + depends on ARCH_PNX4008 && I2C + help + This driver supports the Philips IP3204 I2C IP block master and/or + slave controller + + This driver can also be built as a module. If so, the module + will be called i2c-pnx. + +config I2C_PNX_EARLY + bool "Early initialization for I2C on PNXxxxx" + depends on I2C_PNX=y + help + Under certain circumstances one may need to make sure I2C on PNXxxxx + is initialized earlier than some other driver that depends on it + (for instance, that might be USB in case of PNX4008). With this + option turned on you can guarantee that. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 493c87289b62..37196c1d0794 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o +obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o @@ -16,7 +17,6 @@ obj-$(CONFIG_I2C_I810) += i2c-i810.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_ISA) += i2c-isa.o -obj-$(CONFIG_I2C_ITE) += i2c-ite.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o @@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o @@ -39,6 +40,7 @@ obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o obj-$(CONFIG_I2C_STUB) += i2c-stub.o +obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_VIA) += i2c-via.o obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c new file mode 100644 index 000000000000..67f91bdda089 --- /dev/null +++ b/drivers/i2c/busses/i2c-at91.c @@ -0,0 +1,325 @@ +/* + i2c Support for Atmel's AT91 Two-Wire Interface (TWI) + + Copyright (C) 2004 Rick Bronson + Converted to 2.6 by Andrew Victor <andrew@sanpeople.com> + + Borrowed heavily from original work by: + Copyright (C) 2000 Philip Edelbrock <phil@stimpy.netroedge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. +*/ + +#include <linux/module.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#include <asm/arch/at91_twi.h> +#include <asm/arch/board.h> +#include <asm/arch/cpu.h> + +#define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ + + +static struct clk *twi_clk; +static void __iomem *twi_base; + +#define at91_twi_read(reg) __raw_readl(twi_base + (reg)) +#define at91_twi_write(reg, val) __raw_writel((val), twi_base + (reg)) + + +/* + * Initialize the TWI hardware registers. + */ +static void __devinit at91_twi_hwinit(void) +{ + unsigned long cdiv, ckdiv; + + at91_twi_write(AT91_TWI_IDR, 0xffffffff); /* Disable all interrupts */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST); /* Reset peripheral */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ + + /* Calcuate clock dividers */ + cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3; + cdiv = cdiv + 1; /* round up */ + ckdiv = 0; + while (cdiv > 255) { + ckdiv++; + cdiv = cdiv >> 1; + } + + if (cpu_is_at91rm9200()) { /* AT91RM9200 Errata #22 */ + if (ckdiv > 5) { + printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n"); + ckdiv = 5; + } + } + + at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); +} + +/* + * Poll the i2c status register until the specified bit is set. + * Returns 0 if timed out (100 msec). + */ +static short at91_poll_status(unsigned long bit) +{ + int loop_cntr = 10000; + + do { + udelay(10); + } while (!(at91_twi_read(AT91_TWI_SR) & bit) && (--loop_cntr > 0)); + + return (loop_cntr > 0); +} + +static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length) +{ + /* Send Start */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_START); + + /* Read data */ + while (length--) { + if (!length) /* need to send Stop before reading last byte */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); + if (!at91_poll_status(AT91_TWI_RXRDY)) { + dev_dbg(&adap->dev, "RXRDY timeout\n"); + return -ETIMEDOUT; + } + *buf++ = (at91_twi_read(AT91_TWI_RHR) & 0xff); + } + + return 0; +} + +static int xfer_write(struct i2c_adapter *adap, unsigned char *buf, int length) +{ + /* Load first byte into transmitter */ + at91_twi_write(AT91_TWI_THR, *buf++); + + /* Send Start */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_START); + + do { + if (!at91_poll_status(AT91_TWI_TXRDY)) { + dev_dbg(&adap->dev, "TXRDY timeout\n"); + return -ETIMEDOUT; + } + + length--; /* byte was transmitted */ + + if (length > 0) /* more data to send? */ + at91_twi_write(AT91_TWI_THR, *buf++); + } while (length); + + /* Send Stop */ + at91_twi_write(AT91_TWI_CR, AT91_TWI_STOP); + + return 0; +} + +/* + * Generic i2c master transfer entrypoint. + * + * Note: We do not use Atmel's feature of storing the "internal device address". + * Instead the "internal device address" has to be written using a seperate + * i2c message. + * http://lists.arm.linux.org.uk/pipermail/linux-arm-kernel/2004-September/024411.html + */ +static int at91_xfer(struct i2c_adapter *adap, struct i2c_msg *pmsg, int num) +{ + int i, ret; + + dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); + + for (i = 0; i < num; i++) { + dev_dbg(&adap->dev, " #%d: %sing %d byte%s %s 0x%02x\n", i, + pmsg->flags & I2C_M_RD ? "read" : "writ", + pmsg->len, pmsg->len > 1 ? "s" : "", + pmsg->flags & I2C_M_RD ? "from" : "to", pmsg->addr); + + at91_twi_write(AT91_TWI_MMR, (pmsg->addr << 16) + | ((pmsg->flags & I2C_M_RD) ? AT91_TWI_MREAD : 0)); + + if (pmsg->len && pmsg->buf) { /* sanity check */ + if (pmsg->flags & I2C_M_RD) + ret = xfer_read(adap, pmsg->buf, pmsg->len); + else + ret = xfer_write(adap, pmsg->buf, pmsg->len); + + if (ret) + return ret; + + /* Wait until transfer is finished */ + if (!at91_poll_status(AT91_TWI_TXCOMP)) { + dev_dbg(&adap->dev, "TXCOMP timeout\n"); + return -ETIMEDOUT; + } + } + dev_dbg(&adap->dev, "transfer complete\n"); + pmsg++; /* next message */ + } + return i; +} + +/* + * Return list of supported functionality. + */ +static u32 at91_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm at91_algorithm = { + .master_xfer = at91_xfer, + .functionality = at91_func, +}; + +/* + * Main initialization routine. + */ +static int __devinit at91_i2c_probe(struct platform_device *pdev) +{ + struct i2c_adapter *adapter; + struct resource *res; + int rc; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!request_mem_region(res->start, res->end - res->start + 1, "at91_i2c")) + return -EBUSY; + + twi_base = ioremap(res->start, res->end - res->start + 1); + if (!twi_base) { + rc = -ENOMEM; + goto fail0; + } + + twi_clk = clk_get(NULL, "twi_clk"); + if (IS_ERR(twi_clk)) { + dev_err(&pdev->dev, "no clock defined\n"); + rc = -ENODEV; + goto fail1; + } + + adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + if (adapter == NULL) { + dev_err(&pdev->dev, "can't allocate inteface!\n"); + rc = -ENOMEM; + goto fail2; + } + sprintf(adapter->name, "AT91"); + adapter->algo = &at91_algorithm; + adapter->class = I2C_CLASS_HWMON; + adapter->dev.parent = &pdev->dev; + + platform_set_drvdata(pdev, adapter); + + clk_enable(twi_clk); /* enable peripheral clock */ + at91_twi_hwinit(); /* initialize TWI controller */ + + rc = i2c_add_adapter(adapter); + if (rc) { + dev_err(&pdev->dev, "Adapter %s registration failed\n", + adapter->name); + goto fail3; + } + + dev_info(&pdev->dev, "AT91 i2c bus driver.\n"); + return 0; + +fail3: + platform_set_drvdata(pdev, NULL); + kfree(adapter); + clk_disable(twi_clk); +fail2: + clk_put(twi_clk); +fail1: + iounmap(twi_base); +fail0: + release_mem_region(res->start, res->end - res->start + 1); + + return rc; +} + +static int __devexit at91_i2c_remove(struct platform_device *pdev) +{ + struct i2c_adapter *adapter = platform_get_drvdata(pdev); + struct resource *res; + int rc; + + rc = i2c_del_adapter(adapter); + platform_set_drvdata(pdev, NULL); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(twi_base); + release_mem_region(res->start, res->end - res->start + 1); + + clk_disable(twi_clk); /* disable peripheral clock */ + clk_put(twi_clk); + + return rc; +} + +#ifdef CONFIG_PM + +/* NOTE: could save a few mA by keeping clock off outside of at91_xfer... */ + +static int at91_i2c_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + clk_disable(twi_clk); + return 0; +} + +static int at91_i2c_resume(struct platform_device *pdev) +{ + return clk_enable(twi_clk); +} + +#else +#define at91_i2c_suspend NULL +#define at91_i2c_resume NULL +#endif + +static struct platform_driver at91_i2c_driver = { + .probe = at91_i2c_probe, + .remove = __devexit_p(at91_i2c_remove), + .suspend = at91_i2c_suspend, + .resume = at91_i2c_resume, + .driver = { + .name = "at91_i2c", + .owner = THIS_MODULE, + }, +}; + +static int __init at91_i2c_init(void) +{ + return platform_driver_register(&at91_i2c_driver); +} + +static void __exit at91_i2c_exit(void) +{ + platform_driver_unregister(&at91_i2c_driver); +} + +module_init(at91_i2c_init); +module_exit(at91_i2c_exit); + +MODULE_AUTHOR("Rick Bronson"); +MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index a591fe685f06..834967464814 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -293,7 +293,7 @@ static int __init i2c_pcfisa_init(void) static void i2c_pcfisa_exit(void) { - i2c_pcf_del_bus(&pcf_isa_ops); + i2c_del_adapter(&pcf_isa_ops); if (irq > 0) { disable_irq(irq); diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 457d48a0ab9d..9832f773651d 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -146,7 +146,7 @@ static int __devinit hydra_probe(struct pci_dev *dev, static void __devexit hydra_remove(struct pci_dev *dev) { pdregw(hydra_bit_data.data, 0); /* clear SCLK_OE and SDAT_OE */ - i2c_bit_del_bus(&hydra_adap); + i2c_del_adapter(&hydra_adap); iounmap(hydra_bit_data.data); release_mem_region(pci_resource_start(dev, 0)+ offsetof(struct Hydra, CachePD), 4); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index bbb2fbee836f..ae625b854470 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -33,6 +33,7 @@ ICH7 27DA ESB2 269B ICH8 283E + ICH9 2930 This driver supports several versions of Intel's I/O Controller Hubs (ICH). For SMBus support, they are similar to the PIIX4 and are part of Intel's '810' and other chipsets. @@ -457,6 +458,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, { 0, } }; @@ -468,12 +470,20 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id int err; I801_dev = dev; - if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) || - (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) || - (dev->device == PCI_DEVICE_ID_INTEL_ESB_4)) + switch (dev->device) { + case PCI_DEVICE_ID_INTEL_82801DB_3: + case PCI_DEVICE_ID_INTEL_82801EB_3: + case PCI_DEVICE_ID_INTEL_ESB_4: + case PCI_DEVICE_ID_INTEL_ICH6_16: + case PCI_DEVICE_ID_INTEL_ICH7_17: + case PCI_DEVICE_ID_INTEL_ESB2_17: + case PCI_DEVICE_ID_INTEL_ICH8_5: + case PCI_DEVICE_ID_INTEL_ICH9_6: isich4 = 1; - else + break; + default: isich4 = 0; + } err = pci_enable_device(dev); if (err) { diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c index b66fb6bb1870..10c98bc88aa6 100644 --- a/drivers/i2c/busses/i2c-i810.c +++ b/drivers/i2c/busses/i2c-i810.c @@ -219,14 +219,14 @@ static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id return retval; retval = i2c_bit_add_bus(&i810_ddc_adapter); if (retval) - i2c_bit_del_bus(&i810_i2c_adapter); + i2c_del_adapter(&i810_i2c_adapter); return retval; } static void __devexit i810_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&i810_ddc_adapter); - i2c_bit_del_bus(&i810_i2c_adapter); + i2c_del_adapter(&i810_ddc_adapter); + i2c_del_adapter(&i810_i2c_adapter); iounmap(ioaddr); } diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 781a99c1647a..1898e9987021 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -680,6 +680,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){ dev->idx = ocp->def->index; ocp_set_drvdata(ocp, dev); + if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs), + "ibm_iic")) { + ret = -EBUSY; + goto fail1; + } + if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){ printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n", dev->idx); @@ -750,6 +756,8 @@ fail: iounmap(dev->vaddr); fail2: + release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); +fail1: ocp_set_drvdata(ocp, NULL); kfree(dev); return ret; @@ -777,6 +785,7 @@ static void __devexit iic_remove(struct ocp_device *ocp) free_irq(dev->irq, dev); } iounmap(dev->vaddr); + release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); kfree(dev); } } diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c index 4380653748a4..8ed59a2dff53 100644 --- a/drivers/i2c/busses/i2c-isa.c +++ b/drivers/i2c/busses/i2c-isa.c @@ -91,7 +91,7 @@ int i2c_isa_add_driver(struct i2c_driver *driver) /* Now look for clients */ res = driver->attach_adapter(&isa_adapter); if (res) { - dev_err(&isa_adapter.dev, + dev_dbg(&isa_adapter.dev, "Driver %s failed to attach adapter, unregistering\n", driver->driver.name); driver_unregister(&driver->driver); diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c deleted file mode 100644 index f7d71869b3b9..000000000000 --- a/drivers/i2c/busses/i2c-ite.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - ------------------------------------------------------------------------- - i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system - ------------------------------------------------------------------------- - Hai-Pao Fan, MontaVista Software, Inc. - hpfan@mvista.com or source@mvista.com - - Copyright 2001 MontaVista Software Inc. - - ---------------------------------------------------------------------------- - This file was highly leveraged from i2c-elektor.c, which was created - by Simon G. Vogl and Hans Berglund: - - - Copyright (C) 1995-97 Simon G. Vogl - 1998-99 Hans Berglund - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even - Frodo Looijaard <frodol@dds.nl> */ - -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/wait.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include <linux/i2c.h> -#include <linux/i2c-algo-ite.h> -#include <linux/i2c-adap-ite.h> -#include "../i2c-ite.h" - -#define DEFAULT_BASE 0x14014030 -#define ITE_IIC_IO_SIZE 0x40 -#define DEFAULT_IRQ 0 -#define DEFAULT_CLOCK 0x1b0e /* default 16MHz/(27+14) = 400KHz */ -#define DEFAULT_OWN 0x55 - -static int base; -static int irq; -static int clock; -static int own; - -static struct iic_ite gpi; -static wait_queue_head_t iic_wait; -static int iic_pending; -static spinlock_t lock; - -/* ----- local functions ---------------------------------------------- */ - -static void iic_ite_setiic(void *data, int ctl, short val) -{ - unsigned long j = jiffies + 10; - - pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff); -#ifdef DEBUG - while (time_before(jiffies, j)) - schedule(); -#endif - outw(val,ctl); -} - -static short iic_ite_getiic(void *data, int ctl) -{ - short val; - - val = inw(ctl); - pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff); - return (val); -} - -/* Return our slave address. This is the address - * put on the I2C bus when another master on the bus wants to address us - * as a slave - */ -static int iic_ite_getown(void *data) -{ - return (gpi.iic_own); -} - - -static int iic_ite_getclock(void *data) -{ - return (gpi.iic_clock); -} - - -/* Put this process to sleep. We will wake up when the - * IIC controller interrupts. - */ -static void iic_ite_waitforpin(void) { - DEFINE_WAIT(wait); - int timeout = 2; - unsigned long flags; - - /* If interrupts are enabled (which they are), then put the process to - * sleep. This process will be awakened by two events -- either the - * the IIC peripheral interrupts or the timeout expires. - * If interrupts are not enabled then delay for a reasonable amount - * of time and return. - */ - if (gpi.iic_irq > 0) { - spin_lock_irqsave(&lock, flags); - if (iic_pending == 0) { - spin_unlock_irqrestore(&lock, flags); - prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE); - if (schedule_timeout(timeout*HZ)) { - spin_lock_irqsave(&lock, flags); - if (iic_pending == 1) { - iic_pending = 0; - } - spin_unlock_irqrestore(&lock, flags); - } - finish_wait(&iic_wait, &wait); - } else { - iic_pending = 0; - spin_unlock_irqrestore(&lock, flags); - } - } else { - udelay(100); - } -} - - -static irqreturn_t iic_ite_handler(int this_irq, void *dev_id) -{ - spin_lock(&lock); - iic_pending = 1; - spin_unlock(&lock); - - wake_up_interruptible(&iic_wait); - - return IRQ_HANDLED; -} - - -/* Lock the region of memory where I/O registers exist. Request our - * interrupt line and register its associated handler. - */ -static int iic_hw_resrc_init(void) -{ - if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c")) - return -ENODEV; - - if (gpi.iic_irq <= 0) - return 0; - - if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0) - gpi.iic_irq = 0; - else - enable_irq(gpi.iic_irq); - - return 0; -} - - -static void iic_ite_release(void) -{ - if (gpi.iic_irq > 0) { - disable_irq(gpi.iic_irq); - free_irq(gpi.iic_irq, 0); - } - release_region(gpi.iic_base , 2); -} - -/* ------------------------------------------------------------------------ - * Encapsulate the above functions in the correct operations structure. - * This is only done when more than one hardware adapter is supported. - */ -static struct i2c_algo_iic_data iic_ite_data = { - NULL, - iic_ite_setiic, - iic_ite_getiic, - iic_ite_getown, - iic_ite_getclock, - iic_ite_waitforpin, - 80, 80, 100, /* waits, timeout */ -}; - -static struct i2c_adapter iic_ite_ops = { - .owner = THIS_MODULE, - .id = I2C_HW_I_IIC, - .algo_data = &iic_ite_data, - .name = "ITE IIC adapter", -}; - -/* Called when the module is loaded. This function starts the - * cascade of calls up through the hierarchy of i2c modules (i.e. up to the - * algorithm layer and into to the core layer) - */ -static int __init iic_ite_init(void) -{ - - struct iic_ite *piic = &gpi; - - printk(KERN_INFO "Initialize ITE IIC adapter module\n"); - if (base == 0) - piic->iic_base = DEFAULT_BASE; - else - piic->iic_base = base; - - if (irq == 0) - piic->iic_irq = DEFAULT_IRQ; - else - piic->iic_irq = irq; - - if (clock == 0) - piic->iic_clock = DEFAULT_CLOCK; - else - piic->iic_clock = clock; - - if (own == 0) - piic->iic_own = DEFAULT_OWN; - else - piic->iic_own = own; - - iic_ite_data.data = (void *)piic; - init_waitqueue_head(&iic_wait); - spin_lock_init(&lock); - if (iic_hw_resrc_init() == 0) { - if (i2c_iic_add_bus(&iic_ite_ops) < 0) - return -ENODEV; - } else { - return -ENODEV; - } - printk(KERN_INFO " found device at %#x irq %d.\n", - piic->iic_base, piic->iic_irq); - return 0; -} - - -static void iic_ite_exit(void) -{ - i2c_iic_del_bus(&iic_ite_ops); - iic_ite_release(); -} - -/* If modules is NOT defined when this file is compiled, then the MODULE_* - * macros will resolve to nothing - */ -MODULE_AUTHOR("MontaVista Software <www.mvista.com>"); -MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter"); -MODULE_LICENSE("GPL"); - -module_param(base, int, 0); -module_param(irq, int, 0); -module_param(clock, int, 0); -module_param(own, int, 0); - - -/* Called when module is loaded or when kernel is initialized. - * If MODULES is defined when this file is compiled, then this function will - * resolve to init_module (the function called when insmod is invoked for a - * module). Otherwise, this function is called early in the boot, when the - * kernel is intialized. Check out /include/init.h to see how this works. - */ -module_init(iic_ite_init); - -/* Resolves to module_cleanup when MODULES is defined. */ -module_exit(iic_ite_exit); diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index dd3f4cd3aa68..efa3ecc5522a 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -90,7 +90,7 @@ static int ixp2000_i2c_remove(struct platform_device *plat_dev) platform_set_drvdata(plat_dev, NULL); - i2c_bit_del_bus(&drv_data->adapter); + i2c_del_adapter(&drv_data->adapter); kfree(drv_data); diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c index 1ce01fb0ac09..08e89b83984a 100644 --- a/drivers/i2c/busses/i2c-ixp4xx.c +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -91,7 +91,7 @@ static int ixp4xx_i2c_remove(struct platform_device *plat_dev) platform_set_drvdata(plat_dev, NULL); - i2c_bit_del_bus(&drv_data->adapter); + i2c_del_adapter(&drv_data->adapter); kfree(drv_data); @@ -137,7 +137,8 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev) gpio_line_set(gpio->scl_pin, 0); gpio_line_set(gpio->sda_pin, 0); - if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) { + err = i2c_bit_add_bus(&drv_data->adapter); + if (err) { printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id); kfree(drv_data); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index e0292e414ab2..ad37c10e7fec 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -35,7 +35,7 @@ nForce4 MCP55 0368 This driver supports the 2 SMBuses that are included in the MCP of the - nForce2/3/4 chipsets. + nForce2/3/4/5xx chipsets. */ /* Note: we assume there can only be one nForce2, with two SMBus interfaces */ @@ -52,8 +52,8 @@ #include <asm/io.h> MODULE_LICENSE("GPL"); -MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>"); -MODULE_DESCRIPTION("nForce2 SMBus driver"); +MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@gmx.net>"); +MODULE_DESCRIPTION("nForce2/3/4/5xx SMBus driver"); struct nforce2_smbus { @@ -80,9 +80,6 @@ struct nforce2_smbus { #define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */ #define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */ #define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */ -#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */ -#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */ -#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */ #define NVIDIA_SMB_STS_DONE 0x80 #define NVIDIA_SMB_STS_ALRM 0x40 @@ -95,40 +92,17 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_BYTE 0x04 #define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06 #define NVIDIA_SMB_PRTCL_WORD_DATA 0x08 -#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a -#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c -#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d -#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a #define NVIDIA_SMB_PRTCL_PEC 0x80 static struct pci_driver nforce2_driver; -static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data *data); -static u32 nforce2_func(struct i2c_adapter *adapter); - - -static const struct i2c_algorithm smbus_algorithm = { - .smbus_xfer = nforce2_access, - .functionality = nforce2_func, -}; - -static struct i2c_adapter nforce2_adapter = { - .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, - .algo = &smbus_algorithm, -}; - -/* Return -1 on error. See smbus.h for more information */ +/* Return -1 on error */ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { struct nforce2_smbus *smbus = adap->algo_data; unsigned char protocol, pec, temp; - unsigned char len = 0; /* to keep the compiler quiet */ - int i; protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : NVIDIA_SMB_PRTCL_WRITE; @@ -163,35 +137,6 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec; break; - case I2C_SMBUS_BLOCK_DATA: - outb_p(command, NVIDIA_SMB_CMD); - if (read_write == I2C_SMBUS_WRITE) { - len = min_t(u8, data->block[0], 32); - outb_p(len, NVIDIA_SMB_BCNT); - for (i = 0; i < len; i++) - outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); - } - protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec; - break; - - case I2C_SMBUS_I2C_BLOCK_DATA: - len = min_t(u8, data->block[0], 32); - outb_p(command, NVIDIA_SMB_CMD); - outb_p(len, NVIDIA_SMB_BCNT); - if (read_write == I2C_SMBUS_WRITE) - for (i = 0; i < len; i++) - outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); - protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA; - break; - - case I2C_SMBUS_PROC_CALL: - dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; - - case I2C_SMBUS_BLOCK_PROC_CALL: - dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); - return -1; - default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); return -1; @@ -227,19 +172,8 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, break; case I2C_SMBUS_WORD_DATA: - /* case I2C_SMBUS_PROC_CALL: not supported */ data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8); break; - - case I2C_SMBUS_BLOCK_DATA: - /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */ - len = inb_p(NVIDIA_SMB_BCNT); - len = min_t(u8, len, 32); - case I2C_SMBUS_I2C_BLOCK_DATA: - for (i = 0; i < len; i++) - data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i); - data->block[0] = len; - break; } return 0; @@ -250,10 +184,14 @@ static u32 nforce2_func(struct i2c_adapter *adapter) { /* other functionality might be possible, but is not tested */ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* | - I2C_FUNC_SMBUS_BLOCK_DATA */; + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA; } +static struct i2c_algorithm smbus_algorithm = { + .smbus_xfer = nforce2_access, + .functionality = nforce2_func, +}; + static struct pci_device_id nforce2_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) }, @@ -267,7 +205,6 @@ static struct pci_device_id nforce2_ids[] = { { 0 } }; - MODULE_DEVICE_TABLE (pci, nforce2_ids); @@ -291,7 +228,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, } smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK; - smbus->size = 8; + smbus->size = 64; } smbus->dev = dev; @@ -300,7 +237,9 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, smbus->base, smbus->base+smbus->size-1, name); return -1; } - smbus->adapter = nforce2_adapter; + smbus->adapter.owner = THIS_MODULE; + smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; smbus->adapter.dev.parent = &dev->dev; snprintf(smbus->adapter.name, I2C_NAME_SIZE, diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index dec04da0455c..bcd8367cede1 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -231,8 +231,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) * 13 2 1 * 19.2 2 1 */ - if (fclk_rate > 16000000) - psc = (fclk_rate + 8000000) / 12000000; + if (fclk_rate > 12000000) + psc = fclk_rate / 12000000; } /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index 5eb2bd294fd9..4bc42810b9aa 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -163,7 +163,7 @@ static void __exit i2c_parport_exit(void) if (adapter_parm[type].init.val) line_set(0, &adapter_parm[type].init); - i2c_bit_del_bus(&parport_adapter); + i2c_del_adapter(&parport_adapter); release_region(base, 3); } diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 48a829431c7b..66696a40c7b5 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -218,7 +218,7 @@ static void i2c_parport_detach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); - i2c_bit_del_bus(&adapter->adapter); + i2c_del_adapter(&adapter->adapter); parport_unregister_device(adapter->pdev); if (prev) prev->next = adapter->next; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 407840b6a260..cc6536a19eca 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -156,7 +156,7 @@ static int __init pca_isa_init(void) static void pca_isa_exit(void) { - i2c_pca_del_bus(&pca_isa_ops); + i2c_del_adapter(&pca_isa_ops); if (irq > 0) { disable_irq(irq); diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c new file mode 100644 index 000000000000..de0bca77e926 --- /dev/null +++ b/drivers/i2c/busses/i2c-pnx.c @@ -0,0 +1,708 @@ +/* + * Provides I2C support for Philips PNX010x/PNX4008 boards. + * + * Authors: Dennis Kovalev <dkovalev@ru.mvista.com> + * Vitaly Wool <vwool@ru.mvista.com> + * + * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/timer.h> +#include <linux/completion.h> +#include <linux/platform_device.h> +#include <linux/i2c-pnx.h> +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/uaccess.h> + +#define I2C_PNX_TIMEOUT 10 /* msec */ +#define I2C_PNX_SPEED_KHZ 100 +#define I2C_PNX_REGION_SIZE 0x100 +#define PNX_DEFAULT_FREQ 13 /* MHz */ + +static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data) +{ + while (timeout > 0 && + (ioread32(I2C_REG_STS(data)) & mstatus_active)) { + mdelay(1); + timeout--; + } + return (timeout <= 0); +} + +static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data) +{ + while (timeout > 0 && + (ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) { + mdelay(1); + timeout--; + } + return (timeout <= 0); +} + +static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *data = adap->algo_data; + struct timer_list *timer = &data->mif.timer; + int expires = I2C_PNX_TIMEOUT / (1000 / HZ); + + del_timer_sync(timer); + + dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n", + jiffies, expires); + + timer->expires = jiffies + expires; + timer->data = (unsigned long)adap; + + add_timer(timer); +} + +/** + * i2c_pnx_start - start a device + * @slave_addr: slave address + * @adap: pointer to adapter structure + * + * Generate a START signal in the desired mode. + */ +static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + + dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __FUNCTION__, + slave_addr, alg_data->mif.mode); + + /* Check for 7 bit slave addresses only */ + if (slave_addr & ~0x7f) { + dev_err(&adap->dev, "%s: Invalid slave address %x. " + "Only 7-bit addresses are supported\n", + adap->name, slave_addr); + return -EINVAL; + } + + /* First, make sure bus is idle */ + if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) { + /* Somebody else is monopolizing the bus */ + dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, " + "cntrl = %x, stat = %x\n", + adap->name, slave_addr, + ioread32(I2C_REG_CTL(alg_data)), + ioread32(I2C_REG_STS(alg_data))); + return -EBUSY; + } else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) { + /* Sorry, we lost the bus */ + dev_err(&adap->dev, "%s: Arbitration failure. " + "Slave addr = %02x\n", adap->name, slave_addr); + return -EIO; + } + + /* + * OK, I2C is enabled and we have the bus. + * Clear the current TDI and AFI status flags. + */ + iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi, + I2C_REG_STS(alg_data)); + + dev_dbg(&adap->dev, "%s(): sending %#x\n", __FUNCTION__, + (slave_addr << 1) | start_bit | alg_data->mif.mode); + + /* Write the slave address, START bit and R/W bit */ + iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode, + I2C_REG_TX(alg_data)); + + dev_dbg(&adap->dev, "%s(): exit\n", __FUNCTION__); + + return 0; +} + +/** + * i2c_pnx_stop - stop a device + * @adap: pointer to I2C adapter structure + * + * Generate a STOP signal to terminate the master transaction. + */ +static void i2c_pnx_stop(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + /* Only 1 msec max timeout due to interrupt context */ + long timeout = 1000; + + dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + /* Write a STOP bit to TX FIFO */ + iowrite32(0xff | stop_bit, I2C_REG_TX(alg_data)); + + /* Wait until the STOP is seen. */ + while (timeout > 0 && + (ioread32(I2C_REG_STS(alg_data)) & mstatus_active)) { + /* may be called from interrupt context */ + udelay(1); + timeout--; + } + + dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); +} + +/** + * i2c_pnx_master_xmit - transmit data to slave + * @adap: pointer to I2C adapter structure + * + * Sends one byte of data to the slave + */ +static int i2c_pnx_master_xmit(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 val; + + dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + if (alg_data->mif.len > 0) { + /* We still have something to talk about... */ + val = *alg_data->mif.buf++; + + if (alg_data->mif.len == 1) { + val |= stop_bit; + if (!alg_data->last) + val |= start_bit; + } + + alg_data->mif.len--; + iowrite32(val, I2C_REG_TX(alg_data)); + + dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __FUNCTION__, + val, alg_data->mif.len + 1); + + if (alg_data->mif.len == 0) { + if (alg_data->last) { + /* Wait until the STOP is seen. */ + if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) + dev_err(&adap->dev, "The bus is still " + "active after timeout\n"); + } + /* Disable master interrupts */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) & + ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie), + I2C_REG_CTL(alg_data)); + + del_timer_sync(&alg_data->mif.timer); + + dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n", + __FUNCTION__); + + complete(&alg_data->mif.complete); + } + } else if (alg_data->mif.len == 0) { + /* zero-sized transfer */ + i2c_pnx_stop(adap); + + /* Disable master interrupts. */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) & + ~(mcntrl_afie | mcntrl_naie | mcntrl_drmie), + I2C_REG_CTL(alg_data)); + + /* Stop timer. */ + del_timer_sync(&alg_data->mif.timer); + dev_dbg(&adap->dev, "%s(): Waking up xfer routine after " + "zero-xfer.\n", __FUNCTION__); + + complete(&alg_data->mif.complete); + } + + dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + return 0; +} + +/** + * i2c_pnx_master_rcv - receive data from slave + * @adap: pointer to I2C adapter structure + * + * Reads one byte data from the slave + */ +static int i2c_pnx_master_rcv(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + unsigned int val = 0; + u32 ctl = 0; + + dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + /* Check, whether there is already data, + * or we didn't 'ask' for it yet. + */ + if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) { + dev_dbg(&adap->dev, "%s(): Write dummy data to fill " + "Rx-fifo...\n", __FUNCTION__); + + if (alg_data->mif.len == 1) { + /* Last byte, do not acknowledge next rcv. */ + val |= stop_bit; + if (!alg_data->last) + val |= start_bit; + + /* + * Enable interrupt RFDAIE (data in Rx fifo), + * and disable DRMIE (need data for Tx) + */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl |= mcntrl_rffie | mcntrl_daie; + ctl &= ~mcntrl_drmie; + iowrite32(ctl, I2C_REG_CTL(alg_data)); + } + + /* + * Now we'll 'ask' for data: + * For each byte we want to receive, we must + * write a (dummy) byte to the Tx-FIFO. + */ + iowrite32(val, I2C_REG_TX(alg_data)); + + return 0; + } + + /* Handle data. */ + if (alg_data->mif.len > 0) { + val = ioread32(I2C_REG_RX(alg_data)); + *alg_data->mif.buf++ = (u8) (val & 0xff); + dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __FUNCTION__, val, + alg_data->mif.len); + + alg_data->mif.len--; + if (alg_data->mif.len == 0) { + if (alg_data->last) + /* Wait until the STOP is seen. */ + if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) + dev_err(&adap->dev, "The bus is still " + "active after timeout\n"); + + /* Disable master interrupts */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | + mcntrl_drmie | mcntrl_daie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + /* Kill timer. */ + del_timer_sync(&alg_data->mif.timer); + complete(&alg_data->mif.complete); + } + } + + dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + return 0; +} + +static irqreturn_t +i2c_pnx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + u32 stat, ctl; + struct i2c_adapter *adap = dev_id; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + + dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n", + __FUNCTION__, + ioread32(I2C_REG_STS(alg_data)), + ioread32(I2C_REG_CTL(alg_data)), + alg_data->mif.mode); + stat = ioread32(I2C_REG_STS(alg_data)); + + /* let's see what kind of event this is */ + if (stat & mstatus_afi) { + /* We lost arbitration in the midst of a transfer */ + alg_data->mif.ret = -EIO; + + /* Disable master interrupts. */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | + mcntrl_drmie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + /* Stop timer, to prevent timeout. */ + del_timer_sync(&alg_data->mif.timer); + complete(&alg_data->mif.complete); + } else if (stat & mstatus_nai) { + /* Slave did not acknowledge, generate a STOP */ + dev_dbg(&adap->dev, "%s(): " + "Slave did not acknowledge, generating a STOP.\n", + __FUNCTION__); + i2c_pnx_stop(adap); + + /* Disable master interrupts. */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | + mcntrl_drmie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + /* Our return value. */ + alg_data->mif.ret = -EIO; + + /* Stop timer, to prevent timeout. */ + del_timer_sync(&alg_data->mif.timer); + complete(&alg_data->mif.complete); + } else { + /* + * Two options: + * - Master Tx needs data. + * - There is data in the Rx-fifo + * The latter is only the case if we have requested for data, + * via a dummy write. (See 'i2c_pnx_master_rcv'.) + * We therefore check, as a sanity check, whether that interrupt + * has been enabled. + */ + if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) { + if (alg_data->mif.mode == I2C_SMBUS_WRITE) { + i2c_pnx_master_xmit(adap); + } else if (alg_data->mif.mode == I2C_SMBUS_READ) { + i2c_pnx_master_rcv(adap); + } + } + } + + /* Clear TDI and AFI bits */ + stat = ioread32(I2C_REG_STS(alg_data)); + iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data)); + + dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data)), + ioread32(I2C_REG_CTL(alg_data))); + + return IRQ_HANDLED; +} + +static void i2c_pnx_timeout(unsigned long data) +{ + struct i2c_adapter *adap = (struct i2c_adapter *)data; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 ctl; + + dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. " + "Resetting master...\n", + ioread32(I2C_REG_STS(alg_data)), + ioread32(I2C_REG_CTL(alg_data))); + + /* Reset master and disable interrupts */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl &= ~(mcntrl_afie | mcntrl_naie | mcntrl_rffie | mcntrl_drmie); + iowrite32(ctl, I2C_REG_CTL(alg_data)); + + ctl |= mcntrl_reset; + iowrite32(ctl, I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + alg_data->mif.ret = -EIO; + complete(&alg_data->mif.complete); +} + +static inline void bus_reset_if_active(struct i2c_adapter *adap) +{ + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 stat; + + if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) { + dev_err(&adap->dev, + "%s: Bus is still active after xfer. Reset it...\n", + adap->name); + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, + I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + } else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) { + /* If there is data in the fifo's after transfer, + * flush fifo's by reset. + */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, + I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + } else if (stat & mstatus_nai) { + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, + I2C_REG_CTL(alg_data)); + wait_reset(I2C_PNX_TIMEOUT, alg_data); + } +} + +/** + * i2c_pnx_xfer - generic transfer entry point + * @adap: pointer to I2C adapter structure + * @msgs: array of messages + * @num: number of messages + * + * Initiates the transfer + */ +static int +i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct i2c_msg *pmsg; + int rc = 0, completed = 0, i; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + u32 stat = ioread32(I2C_REG_STS(alg_data)); + + dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n", + __FUNCTION__, num, ioread32(I2C_REG_STS(alg_data))); + + bus_reset_if_active(adap); + + /* Process transactions in a loop. */ + for (i = 0; rc >= 0 && i < num; i++) { + u8 addr; + + pmsg = &msgs[i]; + addr = pmsg->addr; + + if (pmsg->flags & I2C_M_TEN) { + dev_err(&adap->dev, + "%s: 10 bits addr not supported!\n", + adap->name); + rc = -EINVAL; + break; + } + + alg_data->mif.buf = pmsg->buf; + alg_data->mif.len = pmsg->len; + alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ? + I2C_SMBUS_READ : I2C_SMBUS_WRITE; + alg_data->mif.ret = 0; + alg_data->last = (i == num - 1); + + dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __FUNCTION__, + alg_data->mif.mode, + alg_data->mif.len); + + i2c_pnx_arm_timer(adap); + + /* initialize the completion var */ + init_completion(&alg_data->mif.complete); + + /* Enable master interrupt */ + iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_afie | + mcntrl_naie | mcntrl_drmie, + I2C_REG_CTL(alg_data)); + + /* Put start-code and slave-address on the bus. */ + rc = i2c_pnx_start(addr, adap); + if (rc < 0) + break; + + /* Wait for completion */ + wait_for_completion(&alg_data->mif.complete); + + if (!(rc = alg_data->mif.ret)) + completed++; + dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n", + __FUNCTION__, rc); + + /* Clear TDI and AFI bits in case they are set. */ + if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) { + dev_dbg(&adap->dev, + "%s: TDI still set... clearing now.\n", + adap->name); + iowrite32(stat, I2C_REG_STS(alg_data)); + } + if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) { + dev_dbg(&adap->dev, + "%s: AFI still set... clearing now.\n", + adap->name); + iowrite32(stat, I2C_REG_STS(alg_data)); + } + } + + bus_reset_if_active(adap); + + /* Cleanup to be sure... */ + alg_data->mif.buf = NULL; + alg_data->mif.len = 0; + + dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n", + __FUNCTION__, ioread32(I2C_REG_STS(alg_data))); + + if (completed != num) + return ((rc < 0) ? rc : -EREMOTEIO); + + return num; +} + +static u32 i2c_pnx_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm pnx_algorithm = { + .master_xfer = i2c_pnx_xfer, + .functionality = i2c_pnx_func, +}; + +static int i2c_pnx_controller_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); + return i2c_pnx->suspend(pdev, state); +} + +static int i2c_pnx_controller_resume(struct platform_device *pdev) +{ + struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); + return i2c_pnx->resume(pdev); +} + +static int __devinit i2c_pnx_probe(struct platform_device *pdev) +{ + unsigned long tmp; + int ret = 0; + struct i2c_pnx_algo_data *alg_data; + int freq_mhz; + struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data; + + if (!i2c_pnx || !i2c_pnx->adapter) { + dev_err(&pdev->dev, "%s: no platform data supplied\n", + __FUNCTION__); + ret = -EINVAL; + goto out; + } + + platform_set_drvdata(pdev, i2c_pnx); + + if (i2c_pnx->calculate_input_freq) + freq_mhz = i2c_pnx->calculate_input_freq(pdev); + else { + freq_mhz = PNX_DEFAULT_FREQ; + dev_info(&pdev->dev, "Setting bus frequency to default value: " + "%d MHz", freq_mhz); + } + + i2c_pnx->adapter->algo = &pnx_algorithm; + + alg_data = i2c_pnx->adapter->algo_data; + init_timer(&alg_data->mif.timer); + alg_data->mif.timer.function = i2c_pnx_timeout; + alg_data->mif.timer.data = (unsigned long)i2c_pnx->adapter; + + /* Register I/O resource */ + if (!request_region(alg_data->base, I2C_PNX_REGION_SIZE, pdev->name)) { + dev_err(&pdev->dev, + "I/O region 0x%08x for I2C already in use.\n", + alg_data->base); + ret = -ENODEV; + goto out_drvdata; + } + + if (!(alg_data->ioaddr = + (u32)ioremap(alg_data->base, I2C_PNX_REGION_SIZE))) { + dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n"); + ret = -ENOMEM; + goto out_release; + } + + i2c_pnx->set_clock_run(pdev); + + /* + * Clock Divisor High This value is the number of system clocks + * the serial clock (SCL) will be high. + * For example, if the system clock period is 50 ns and the maximum + * desired serial period is 10000 ns (100 kHz), then CLKHI would be + * set to 0.5*(f_sys/f_i2c)-2=0.5*(20e6/100e3)-2=98. The actual value + * programmed into CLKHI will vary from this slightly due to + * variations in the output pad's rise and fall times as well as + * the deglitching filter length. + */ + + tmp = ((freq_mhz * 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2; + iowrite32(tmp, I2C_REG_CKH(alg_data)); + iowrite32(tmp, I2C_REG_CKL(alg_data)); + + iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data)); + if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) { + ret = -ENODEV; + goto out_unmap; + } + init_completion(&alg_data->mif.complete); + + ret = request_irq(alg_data->irq, i2c_pnx_interrupt, + 0, pdev->name, i2c_pnx->adapter); + if (ret) + goto out_clock; + + /* Register this adapter with the I2C subsystem */ + i2c_pnx->adapter->dev.parent = &pdev->dev; + ret = i2c_add_adapter(i2c_pnx->adapter); + if (ret < 0) { + dev_err(&pdev->dev, "I2C: Failed to add bus\n"); + goto out_irq; + } + + dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n", + i2c_pnx->adapter->name, alg_data->base, alg_data->irq); + + return 0; + +out_irq: + free_irq(alg_data->irq, alg_data); +out_clock: + i2c_pnx->set_clock_stop(pdev); +out_unmap: + iounmap((void *)alg_data->ioaddr); +out_release: + release_region(alg_data->base, I2C_PNX_REGION_SIZE); +out_drvdata: + platform_set_drvdata(pdev, NULL); +out: + return ret; +} + +static int __devexit i2c_pnx_remove(struct platform_device *pdev) +{ + struct i2c_pnx_data *i2c_pnx = platform_get_drvdata(pdev); + struct i2c_adapter *adap = i2c_pnx->adapter; + struct i2c_pnx_algo_data *alg_data = adap->algo_data; + + free_irq(alg_data->irq, alg_data); + i2c_del_adapter(adap); + i2c_pnx->set_clock_stop(pdev); + iounmap((void *)alg_data->ioaddr); + release_region(alg_data->base, I2C_PNX_REGION_SIZE); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver i2c_pnx_driver = { + .driver = { + .name = "pnx-i2c", + .owner = THIS_MODULE, + }, + .probe = i2c_pnx_probe, + .remove = __devexit_p(i2c_pnx_remove), + .suspend = i2c_pnx_controller_suspend, + .resume = i2c_pnx_controller_resume, +}; + +static int __init i2c_adap_pnx_init(void) +{ + return platform_driver_register(&i2c_pnx_driver); +} + +static void __exit i2c_adap_pnx_exit(void) +{ + platform_driver_unregister(&i2c_pnx_driver); +} + +MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>"); +MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_I2C_PNX_EARLY +/* We need to make sure I2C is initialized before USB */ +subsys_initcall(i2c_adap_pnx_init); +#else +mudule_init(i2c_adap_pnx_init); +#endif +module_exit(i2c_adap_pnx_exit); diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c index 7745e21874a8..07c1f1e27df1 100644 --- a/drivers/i2c/busses/i2c-prosavage.c +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -212,7 +212,7 @@ static void prosavage_remove(struct pci_dev *dev) if (chip->i2c_bus[i].adap_ok == 0) continue; - ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap); + ret = i2c_del_adapter(&chip->i2c_bus[i].adap); if (ret) { dev_err(&dev->dev, "%s not removed\n", chip->i2c_bus[i].adap.name); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 81050d3c9b21..c3b1567c852a 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -272,7 +272,8 @@ static int i2c_pxa_wait_slave(struct pxa_i2c *i2c) dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n", __func__, (long)jiffies, ISR, ICR, IBMR); - if ((ISR & (ISR_UB|ISR_IBB|ISR_SAD)) == ISR_SAD || + if ((ISR & (ISR_UB|ISR_IBB)) == 0 || + (ISR & ISR_SAD) != 0 || (ICR & ICR_SCLE) == 0) { if (i2c_debug > 1) dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); @@ -357,133 +358,6 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) #ifdef CONFIG_I2C_PXA_SLAVE /* - * I2C EEPROM emulation. - */ -static struct i2c_eeprom_emu eeprom = { - .size = I2C_EEPROM_EMU_SIZE, - .watch = LIST_HEAD_INIT(eeprom.watch), -}; - -struct i2c_eeprom_emu *i2c_pxa_get_eeprom(void) -{ - return &eeprom; -} - -int i2c_eeprom_emu_addwatcher(struct i2c_eeprom_emu *emu, void *data, - unsigned int addr, unsigned int size, - struct i2c_eeprom_emu_watcher *watcher) -{ - struct i2c_eeprom_emu_watch *watch; - unsigned long flags; - - if (addr + size > emu->size) - return -EINVAL; - - watch = kmalloc(sizeof(struct i2c_eeprom_emu_watch), GFP_KERNEL); - if (watch) { - watch->start = addr; - watch->end = addr + size - 1; - watch->ops = watcher; - watch->data = data; - - local_irq_save(flags); - list_add(&watch->node, &emu->watch); - local_irq_restore(flags); - } - - return watch ? 0 : -ENOMEM; -} - -void i2c_eeprom_emu_delwatcher(struct i2c_eeprom_emu *emu, void *data, - struct i2c_eeprom_emu_watcher *watcher) -{ - struct i2c_eeprom_emu_watch *watch, *n; - unsigned long flags; - - list_for_each_entry_safe(watch, n, &emu->watch, node) { - if (watch->ops == watcher && watch->data == data) { - local_irq_save(flags); - list_del(&watch->node); - local_irq_restore(flags); - kfree(watch); - } - } -} - -static void i2c_eeprom_emu_event(void *ptr, i2c_slave_event_t event) -{ - struct i2c_eeprom_emu *emu = ptr; - - eedbg(3, "i2c_eeprom_emu_event: %d\n", event); - - switch (event) { - case I2C_SLAVE_EVENT_START_WRITE: - emu->seen_start = 1; - eedbg(2, "i2c_eeprom: write initiated\n"); - break; - - case I2C_SLAVE_EVENT_START_READ: - emu->seen_start = 0; - eedbg(2, "i2c_eeprom: read initiated\n"); - break; - - case I2C_SLAVE_EVENT_STOP: - emu->seen_start = 0; - eedbg(2, "i2c_eeprom: received stop\n"); - break; - - default: - eedbg(0, "i2c_eeprom: unhandled event\n"); - break; - } -} - -static int i2c_eeprom_emu_read(void *ptr) -{ - struct i2c_eeprom_emu *emu = ptr; - int ret; - - ret = emu->bytes[emu->ptr]; - emu->ptr = (emu->ptr + 1) % emu->size; - - return ret; -} - -static void i2c_eeprom_emu_write(void *ptr, unsigned int val) -{ - struct i2c_eeprom_emu *emu = ptr; - struct i2c_eeprom_emu_watch *watch; - - if (emu->seen_start != 0) { - eedbg(2, "i2c_eeprom_emu_write: setting ptr %02x\n", val); - emu->ptr = val; - emu->seen_start = 0; - return; - } - - emu->bytes[emu->ptr] = val; - - eedbg(1, "i2c_eeprom_emu_write: ptr=0x%02x, val=0x%02x\n", - emu->ptr, val); - - list_for_each_entry(watch, &emu->watch, node) { - if (!watch->ops || !watch->ops->write) - continue; - if (watch->start <= emu->ptr && watch->end >= emu->ptr) - watch->ops->write(watch->data, emu->ptr, val); - } - - emu->ptr = (emu->ptr + 1) % emu->size; -} - -struct i2c_slave_client eeprom_client = { - .data = &eeprom, - .event = i2c_eeprom_emu_event, - .read = i2c_eeprom_emu_read, - .write = i2c_eeprom_emu_write -}; - -/* * PXA I2C Slave mode */ @@ -492,7 +366,10 @@ static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr) if (isr & ISR_BED) { /* what should we do here? */ } else { - int ret = i2c->slave->read(i2c->slave->data); + int ret = 0; + + if (i2c->slave != NULL) + ret = i2c->slave->read(i2c->slave->data); IDBR = ret; ICR |= ICR_TB; /* allow next byte */ @@ -959,11 +836,9 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->slave_addr = I2C_PXA_SLAVE_ADDR; #ifdef CONFIG_I2C_PXA_SLAVE - i2c->slave = &eeprom_client; if (plat) { i2c->slave_addr = plat->slave_addr; - if (plat->slave) - i2c->slave = plat->slave; + i2c->slave = plat->slave; } #endif diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c index 209f47ea1750..844b4ff90893 100644 --- a/drivers/i2c/busses/i2c-savage4.c +++ b/drivers/i2c/busses/i2c-savage4.c @@ -173,7 +173,7 @@ static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_ static void __devexit savage4_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&savage4_i2c_adapter); + i2c_del_adapter(&savage4_i2c_adapter); iounmap(ioaddr); } diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c new file mode 100644 index 000000000000..081d9578ce10 --- /dev/null +++ b/drivers/i2c/busses/i2c-versatile.c @@ -0,0 +1,153 @@ +/* + * i2c-versatile.c + * + * Copyright (C) 2006 ARM Ltd. + * written by Russell King, Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/io.h> + +#define I2C_CONTROL 0x00 +#define I2C_CONTROLS 0x00 +#define I2C_CONTROLC 0x04 +#define SCL (1 << 0) +#define SDA (1 << 1) + +struct i2c_versatile { + struct i2c_adapter adap; + struct i2c_algo_bit_data algo; + void __iomem *base; +}; + +static void i2c_versatile_setsda(void *data, int state) +{ + struct i2c_versatile *i2c = data; + + writel(SDA, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC)); +} + +static void i2c_versatile_setscl(void *data, int state) +{ + struct i2c_versatile *i2c = data; + + writel(SCL, i2c->base + (state ? I2C_CONTROLS : I2C_CONTROLC)); +} + +static int i2c_versatile_getsda(void *data) +{ + struct i2c_versatile *i2c = data; + return !!(readl(i2c->base + I2C_CONTROL) & SDA); +} + +static int i2c_versatile_getscl(void *data) +{ + struct i2c_versatile *i2c = data; + return !!(readl(i2c->base + I2C_CONTROL) & SCL); +} + +static struct i2c_algo_bit_data i2c_versatile_algo = { + .setsda = i2c_versatile_setsda, + .setscl = i2c_versatile_setscl, + .getsda = i2c_versatile_getsda, + .getscl = i2c_versatile_getscl, + .udelay = 30, + .timeout = HZ, +}; + +static int i2c_versatile_probe(struct platform_device *dev) +{ + struct i2c_versatile *i2c; + struct resource *r; + int ret; + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!r) { + ret = -EINVAL; + goto err_out; + } + + if (!request_mem_region(r->start, r->end - r->start + 1, "versatile-i2c")) { + ret = -EBUSY; + goto err_out; + } + + i2c = kzalloc(sizeof(struct i2c_versatile), GFP_KERNEL); + if (!i2c) { + ret = -ENOMEM; + goto err_release; + } + + i2c->base = ioremap(r->start, r->end - r->start + 1); + if (!i2c->base) { + ret = -ENOMEM; + goto err_free; + } + + writel(SCL | SDA, i2c->base + I2C_CONTROLS); + + i2c->adap.owner = THIS_MODULE; + strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name)); + i2c->adap.algo_data = &i2c->algo; + i2c->adap.dev.parent = &dev->dev; + i2c->algo = i2c_versatile_algo; + i2c->algo.data = i2c; + + ret = i2c_bit_add_bus(&i2c->adap); + if (ret >= 0) { + platform_set_drvdata(dev, i2c); + return 0; + } + + iounmap(i2c->base); + err_free: + kfree(i2c); + err_release: + release_mem_region(r->start, r->end - r->start + 1); + err_out: + return ret; +} + +static int i2c_versatile_remove(struct platform_device *dev) +{ + struct i2c_versatile *i2c = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + i2c_del_adapter(&i2c->adap); + return 0; +} + +static struct platform_driver i2c_versatile_driver = { + .probe = i2c_versatile_probe, + .remove = i2c_versatile_remove, + .driver = { + .name = "versatile-i2c", + .owner = THIS_MODULE, + }, +}; + +static int __init i2c_versatile_init(void) +{ + return platform_driver_register(&i2c_versatile_driver); +} + +static void __exit i2c_versatile_exit(void) +{ + platform_driver_unregister(&i2c_versatile_driver); +} + +module_init(i2c_versatile_init); +module_exit(i2c_versatile_exit); + +MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 910e200ad500..15d7e00e47e6 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -151,7 +151,7 @@ static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_i static void __devexit vt586b_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&vt586b_adapter); + i2c_del_adapter(&vt586b_adapter); release_region(I2C_DIR, IOSPACE); pm_io_base = 0; } diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index 6c8d25183382..b0377b81744b 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -211,14 +211,14 @@ static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_ return retval; retval = i2c_bit_add_bus(&voodoo3_ddc_adapter); if (retval) - i2c_bit_del_bus(&voodoo3_i2c_adapter); + i2c_del_adapter(&voodoo3_i2c_adapter); return retval; } static void __devexit voodoo3_remove(struct pci_dev *dev) { - i2c_bit_del_bus(&voodoo3_i2c_adapter); - i2c_bit_del_bus(&voodoo3_ddc_adapter); + i2c_del_adapter(&voodoo3_i2c_adapter); + i2c_del_adapter(&voodoo3_ddc_adapter); iounmap(ioaddr); } diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 32aab0d34ee9..714bae780953 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -494,11 +494,12 @@ static __init int scx200_create_pci(const char *text, struct pci_dev *pdev, iface->pdev = pdev; iface->bar = bar; - pci_enable_device_bars(iface->pdev, 1 << iface->bar); + rc = pci_enable_device_bars(iface->pdev, 1 << iface->bar); + if (rc) + goto errout_free; rc = pci_request_region(iface->pdev, iface->bar, iface->adapter.name); - - if (rc != 0) { + if (rc) { printk(KERN_ERR NAME ": can't allocate PCI BAR %d\n", iface->bar); goto errout_free; diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index 8ddbae4fafe6..6cd96e43aa72 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -116,7 +116,7 @@ static int scx200_i2c_init(void) static void scx200_i2c_cleanup(void) { - i2c_bit_del_bus(&scx200_i2c_ops); + i2c_del_adapter(&scx200_i2c_ops); } module_init(scx200_i2c_init); diff --git a/drivers/i2c/chips/ds1337.c b/drivers/i2c/chips/ds1337.c index 93d483b8b770..ec17d6b684a2 100644 --- a/drivers/i2c/chips/ds1337.c +++ b/drivers/i2c/chips/ds1337.c @@ -347,13 +347,19 @@ static void ds1337_init_client(struct i2c_client *client) if ((status & 0x80) || (control & 0x80)) { /* RTC not running */ - u8 buf[16]; + u8 buf[1+16]; /* First byte is interpreted as address */ struct i2c_msg msg[1]; dev_dbg(&client->dev, "%s: RTC not running!\n", __FUNCTION__); /* Initialize all, including STATUS and CONTROL to zero */ memset(buf, 0, sizeof(buf)); + + /* Write valid values in the date/time registers */ + buf[1+DS1337_REG_DAY] = 1; + buf[1+DS1337_REG_DATE] = 1; + buf[1+DS1337_REG_MONTH] = 1; + msg[0].addr = client->addr; msg[0].flags = 0; msg[0].len = sizeof(buf); diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c index 4630f1969a09..15edf40828b4 100644 --- a/drivers/i2c/chips/ds1374.c +++ b/drivers/i2c/chips/ds1374.c @@ -140,12 +140,14 @@ ulong ds1374_get_rtc_time(void) return t1; } -static void ds1374_set_work(void *arg) +static ulong new_time; + +static void ds1374_set_work(struct work_struct *work) { ulong t1, t2; int limit = 10; /* arbitrary retry limit */ - t1 = *(ulong *) arg; + t1 = new_time; mutex_lock(&ds1374_mutex); @@ -167,11 +169,9 @@ static void ds1374_set_work(void *arg) "can't confirm time set from rtc chip\n"); } -static ulong new_time; - static struct workqueue_struct *ds1374_workqueue; -static DECLARE_WORK(ds1374_work, ds1374_set_work, &new_time); +static DECLARE_WORK(ds1374_work, ds1374_set_work); int ds1374_set_rtc_time(ulong nowtime) { @@ -180,7 +180,7 @@ int ds1374_set_rtc_time(ulong nowtime) if (in_interrupt()) queue_work(ds1374_workqueue, &ds1374_work); else - ds1374_set_work(&new_time); + ds1374_set_work(NULL); return 0; } diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 2dd0a34d9472..420377c86422 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -215,8 +215,15 @@ m41t00_set(void *arg) } static ulong new_time; +/* well, isn't this API just _lovely_? */ +static void +m41t00_barf(struct work_struct *unusable) +{ + m41t00_set(&new_time); +} + static struct workqueue_struct *m41t00_wq; -static DECLARE_WORK(m41t00_work, m41t00_set, &new_time); +static DECLARE_WORK(m41t00_work, m41t00_barf); int m41t00_set_rtc_time(ulong nowtime) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 7ca81f42d14b..3e31f1d265c9 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -127,20 +127,17 @@ static ssize_t show_client_name(struct device *dev, struct device_attribute *att return sprintf(buf, "%s\n", client->name); } -/* - * We can't use the DEVICE_ATTR() macro here as we want the same filename for a - * different type of a device. So beware if the DEVICE_ATTR() macro ever - * changes, this definition will also have to change. +/* + * We can't use the DEVICE_ATTR() macro here, as we used the same name for + * an i2c adapter attribute (above). */ -static struct device_attribute dev_attr_client_name = { - .attr = {.name = "name", .mode = S_IRUGO, .owner = THIS_MODULE }, - .show = &show_client_name, -}; +static struct device_attribute dev_attr_client_name = + __ATTR(name, S_IRUGO, &show_client_name, NULL); /* --------------------------------------------------- - * registering functions - * --------------------------------------------------- + * registering functions + * --------------------------------------------------- */ /* ----- @@ -314,7 +311,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) res = driver_register(&driver->driver); if (res) return res; - + mutex_lock(&core_lists); list_add_tail(&driver->list,&drivers); @@ -338,13 +335,13 @@ int i2c_del_driver(struct i2c_driver *driver) struct list_head *item1, *item2, *_n; struct i2c_client *client; struct i2c_adapter *adap; - + int res = 0; mutex_lock(&core_lists); /* Have a look at each adapter, if clients of this driver are still - * attached. If so, detach them to be able to kill the driver + * attached. If so, detach them to be able to kill the driver * afterwards. */ list_for_each(item1,&adapters) { @@ -419,14 +416,14 @@ int i2c_attach_client(struct i2c_client *client) goto out_unlock; } list_add_tail(&client->list,&adapter->clients); - + client->usage_count = 0; client->dev.parent = &client->adapter->dev; client->dev.driver = &client->driver->driver; client->dev.bus = &i2c_bus_type; client->dev.release = &i2c_client_release; - + snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id), "%d-%04x", i2c_adapter_id(adapter), client->addr); dev_dbg(&adapter->dev, "client [%s] registered with bus id %s\n", @@ -467,7 +464,7 @@ int i2c_detach_client(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; int res = 0; - + if (client->usage_count > 0) { dev_warn(&client->dev, "Client [%s] still busy, " "can't detach\n", client->name); @@ -535,10 +532,10 @@ int i2c_release_client(struct i2c_client *client) __FUNCTION__); return -EPERM; } - + client->usage_count--; i2c_dec_use_client(client); - + return 0; } @@ -603,7 +600,7 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) } #endif - mutex_lock(&adap->bus_lock); + mutex_lock_nested(&adap->bus_lock, adap->level); ret = adap->algo->master_xfer(adap,msgs,num); mutex_unlock(&adap->bus_lock); @@ -624,7 +621,7 @@ int i2c_master_send(struct i2c_client *client,const char *buf ,int count) msg.flags = client->flags & I2C_M_TEN; msg.len = count; msg.buf = (char *)buf; - + ret = i2c_transfer(adap, &msg, 1); /* If everything went ok (i.e. 1 msg transmitted), return #bytes @@ -757,7 +754,7 @@ int i2c_probe(struct i2c_adapter *adapter, if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { if (address_data->probe[0] == I2C_CLIENT_END && address_data->normal_i2c[0] == I2C_CLIENT_END) - return 0; + return 0; dev_warn(&adapter->dev, "SMBus Quick command not supported, " "can't probe for chips\n"); @@ -817,7 +814,7 @@ int i2c_probe(struct i2c_adapter *adapter, struct i2c_adapter* i2c_get_adapter(int id) { struct i2c_adapter *adapter; - + mutex_lock(&core_lists); adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id); if (adapter && !try_module_get(adapter->owner)) @@ -834,14 +831,14 @@ void i2c_put_adapter(struct i2c_adapter *adap) /* The SMBus parts */ -#define POLY (0x1070U << 3) +#define POLY (0x1070U << 3) static u8 crc8(u16 data) { int i; - + for(i = 0; i < 8; i++) { - if (data & 0x8000) + if (data & 0x8000) data = data ^ POLY; data = data << 1; } @@ -891,13 +888,13 @@ static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) rpec, cpec); return -1; } - return 0; + return 0; } s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value) { return i2c_smbus_xfer(client->adapter,client->addr,client->flags, - value,0,I2C_SMBUS_QUICK,NULL); + value,0,I2C_SMBUS_QUICK,NULL); } s32 i2c_smbus_read_byte(struct i2c_client *client) @@ -996,11 +993,11 @@ s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, I2C_SMBUS_I2C_BLOCK_DATA, &data); } -/* Simulate a SMBus command using the i2c protocol +/* Simulate a SMBus command using the i2c protocol No checking of parameters is done! */ -static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, +static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, unsigned short flags, - char read_write, u8 command, int size, + char read_write, u8 command, int size, union i2c_smbus_data * data) { /* So we need to generate a series of msgs. In the case of writing, we @@ -1010,7 +1007,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3]; unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2]; int num = read_write == I2C_SMBUS_READ?2:1; - struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, + struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 }, { addr, flags | I2C_M_RD, 0, msgbuf1 } }; int i; @@ -1103,14 +1100,14 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, if (i) { /* Compute PEC if first message is a write */ if (!(msg[0].flags & I2C_M_RD)) { - if (num == 1) /* Write only */ + if (num == 1) /* Write only */ i2c_smbus_add_pec(&msg[0]); else /* Write followed by read */ partial_pec = i2c_smbus_msg_pec(0, &msg[0]); } /* Ask for PEC if last message is a read */ if (msg[num-1].flags & I2C_M_RD) - msg[num-1].len++; + msg[num-1].len++; } if (i2c_transfer(adapter, msg, num) < 0) @@ -1130,7 +1127,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, case I2C_SMBUS_BYTE_DATA: data->byte = msgbuf1[0]; break; - case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_WORD_DATA: case I2C_SMBUS_PROC_CALL: data->word = msgbuf1[0] | (msgbuf1[1] << 8); break; @@ -1146,7 +1143,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, - char read_write, u8 command, int size, + char read_write, u8 command, int size, union i2c_smbus_data * data) { s32 res; diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 3f869033ed70..ac5bd2a7ca99 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -1,5 +1,5 @@ /* - i2c-dev.c - i2c-bus driver, char device interface + i2c-dev.c - i2c-bus driver, char device interface Copyright (C) 1995-97 Simon G. Vogl Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl> @@ -42,7 +42,7 @@ static struct i2c_driver i2cdev_driver; struct i2c_dev { struct list_head list; struct i2c_adapter *adap; - struct class_device *class_dev; + struct device *dev; }; #define I2C_MINORS 256 @@ -90,17 +90,19 @@ static void return_i2c_dev(struct i2c_dev *i2c_dev) spin_lock(&i2c_dev_list_lock); list_del(&i2c_dev->list); spin_unlock(&i2c_dev_list_lock); + kfree(i2c_dev); } -static ssize_t show_adapter_name(struct class_device *class_dev, char *buf) +static ssize_t show_adapter_name(struct device *dev, + struct device_attribute *attr, char *buf) { - struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(class_dev->devt)); + struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(dev->devt)); if (!i2c_dev) return -ENODEV; return sprintf(buf, "%s\n", i2c_dev->adap->name); } -static CLASS_DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); +static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL); static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count, loff_t *offset) @@ -118,7 +120,7 @@ static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count, return -ENOMEM; pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n", - iminor(file->f_dentry->d_inode), count); + iminor(file->f_path.dentry->d_inode), count); ret = i2c_master_recv(client,tmp,count); if (ret >= 0) @@ -146,7 +148,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c } pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n", - iminor(file->f_dentry->d_inode), count); + iminor(file->f_path.dentry->d_inode), count); ret = i2c_master_send(client,tmp,count); kfree(tmp); @@ -171,7 +173,7 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, switch ( cmd ) { case I2C_SLAVE: case I2C_SLAVE_FORCE: - if ((arg > 0x3ff) || + if ((arg > 0x3ff) || (((client->flags & I2C_M_TEN) == 0) && arg > 0x7f)) return -EINVAL; if ((cmd == I2C_SLAVE) && i2c_check_addr(client->adapter,arg)) @@ -192,12 +194,11 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, return 0; case I2C_FUNCS: funcs = i2c_get_functionality(client->adapter); - return (copy_to_user((unsigned long __user *)arg, &funcs, - sizeof(unsigned long)))?-EFAULT:0; + return put_user(funcs, (unsigned long __user *)arg); case I2C_RDWR: - if (copy_from_user(&rdwr_arg, - (struct i2c_rdwr_ioctl_data __user *)arg, + if (copy_from_user(&rdwr_arg, + (struct i2c_rdwr_ioctl_data __user *)arg, sizeof(rdwr_arg))) return -EFAULT; @@ -205,9 +206,9 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, * be sent at once */ if (rdwr_arg.nmsgs > I2C_RDRW_IOCTL_MAX_MSGS) return -EINVAL; - + rdwr_pa = (struct i2c_msg *) - kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg), + kmalloc(rdwr_arg.nmsgs * sizeof(struct i2c_msg), GFP_KERNEL); if (rdwr_pa == NULL) return -ENOMEM; @@ -277,9 +278,9 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, (struct i2c_smbus_ioctl_data __user *) arg, sizeof(struct i2c_smbus_ioctl_data))) return -EFAULT; - if ((data_arg.size != I2C_SMBUS_BYTE) && + if ((data_arg.size != I2C_SMBUS_BYTE) && (data_arg.size != I2C_SMBUS_QUICK) && - (data_arg.size != I2C_SMBUS_BYTE_DATA) && + (data_arg.size != I2C_SMBUS_BYTE_DATA) && (data_arg.size != I2C_SMBUS_WORD_DATA) && (data_arg.size != I2C_SMBUS_PROC_CALL) && (data_arg.size != I2C_SMBUS_BLOCK_DATA) && @@ -290,11 +291,11 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, data_arg.size); return -EINVAL; } - /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1, + /* Note that I2C_SMBUS_READ and I2C_SMBUS_WRITE are 0 and 1, so the check is valid if size==I2C_SMBUS_QUICK too. */ - if ((data_arg.read_write != I2C_SMBUS_READ) && + if ((data_arg.read_write != I2C_SMBUS_READ) && (data_arg.read_write != I2C_SMBUS_WRITE)) { - dev_dbg(&client->adapter->dev, + dev_dbg(&client->adapter->dev, "read_write out of range (%x) in ioctl I2C_SMBUS.\n", data_arg.read_write); return -EINVAL; @@ -303,7 +304,7 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, /* Note that command values are always valid! */ if ((data_arg.size == I2C_SMBUS_QUICK) || - ((data_arg.size == I2C_SMBUS_BYTE) && + ((data_arg.size == I2C_SMBUS_BYTE) && (data_arg.read_write == I2C_SMBUS_WRITE))) /* These are special: we do not use data */ return i2c_smbus_xfer(client->adapter, client->addr, @@ -321,14 +322,14 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, if ((data_arg.size == I2C_SMBUS_BYTE_DATA) || (data_arg.size == I2C_SMBUS_BYTE)) datasize = sizeof(data_arg.data->byte); - else if ((data_arg.size == I2C_SMBUS_WORD_DATA) || + else if ((data_arg.size == I2C_SMBUS_WORD_DATA) || (data_arg.size == I2C_SMBUS_PROC_CALL)) datasize = sizeof(data_arg.data->word); else /* size == smbus block, i2c block, or block proc. call */ datasize = sizeof(data_arg.data->block); - if ((data_arg.size == I2C_SMBUS_PROC_CALL) || - (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || + if ((data_arg.size == I2C_SMBUS_PROC_CALL) || + (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || (data_arg.read_write == I2C_SMBUS_WRITE)) { if (copy_from_user(&temp, data_arg.data, datasize)) return -EFAULT; @@ -336,8 +337,8 @@ static int i2cdev_ioctl(struct inode *inode, struct file *file, res = i2c_smbus_xfer(client->adapter,client->addr,client->flags, data_arg.read_write, data_arg.command,data_arg.size,&temp); - if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) || - (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || + if (! res && ((data_arg.size == I2C_SMBUS_PROC_CALL) || + (data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) || (data_arg.read_write == I2C_SMBUS_READ))) { if (copy_to_user(data_arg.data, &temp, datasize)) return -EFAULT; @@ -413,15 +414,14 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) return PTR_ERR(i2c_dev); /* register this i2c device with the driver core */ - i2c_dev->class_dev = class_device_create(i2c_dev_class, NULL, - MKDEV(I2C_MAJOR, adap->nr), - &adap->dev, "i2c-%d", - adap->nr); - if (!i2c_dev->class_dev) { - res = -ENODEV; + i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, + MKDEV(I2C_MAJOR, adap->nr), + "i2c-%d", adap->nr); + if (IS_ERR(i2c_dev->dev)) { + res = PTR_ERR(i2c_dev->dev); goto error; } - res = class_device_create_file(i2c_dev->class_dev, &class_device_attr_name); + res = device_create_file(i2c_dev->dev, &dev_attr_name); if (res) goto error_destroy; @@ -429,10 +429,9 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) adap->name, adap->nr); return 0; error_destroy: - class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); + device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); error: return_i2c_dev(i2c_dev); - kfree(i2c_dev); return res; } @@ -444,10 +443,9 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) if (!i2c_dev) /* attach_adapter must have failed */ return 0; - class_device_remove_file(i2c_dev->class_dev, &class_device_attr_name); + device_remove_file(i2c_dev->dev, &dev_attr_name); return_i2c_dev(i2c_dev); - class_device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); - kfree(i2c_dev); + device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr)); pr_debug("i2c-dev: adapter [%s] unregistered\n", adap->name); return 0; |