summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c78
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h2
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c43
3 files changed, 62 insertions, 61 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 3c41995634c2..d9cab6dc2812 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -21,17 +21,17 @@
* ----------------------------------------------------------------------------
*
*/
+#include <linux/delay.h>
#include <linux/export.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/delay.h>
#include <linux/module.h>
-#include "i2c-designware-core.h"
+#include <linux/pm_runtime.h>
+#include "i2c-designware-core.h"
/*
* Registers offset
*/
@@ -98,7 +98,7 @@
#define DW_IC_ERR_TX_ABRT 0x1
-#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3))
#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2)
@@ -113,10 +113,10 @@
#define TIMEOUT 20 /* ms */
/*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
*
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
+ * Only expected abort codes are listed here,
+ * refer to the datasheet for the full list.
*/
#define ABRT_7B_ADDR_NOACK 0
#define ABRT_10ADDR1_NOACK 1
@@ -318,7 +318,7 @@ static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
}
/**
- * i2c_dw_init() - initialize the designware i2c master hardware
+ * i2c_dw_init() - Initialize the designware I2C master hardware
* @dev: device private data
*
* This functions configures and enables the I2C master.
@@ -344,8 +344,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
/* Configure register access mode 16bit */
dev->flags |= ACCESS_16BIT;
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
- dev_err(dev->dev, "Unknown Synopsys component type: "
- "0x%08x\n", reg);
+ dev_err(dev->dev,
+ "Unknown Synopsys component type: 0x%08x\n", reg);
i2c_dw_release_lock(dev);
return -ENODEV;
}
@@ -355,7 +355,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
/* Disable the adapter */
__i2c_dw_enable_and_wait(dev, false);
- /* set standard and fast speed deviders for high/low periods */
+ /* Set standard and fast speed deviders for high/low periods */
sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
@@ -444,7 +444,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
dw_writel(dev, 0, DW_IC_RX_TL);
- /* configure the i2c master */
+ /* Configure the I2C master */
dw_writel(dev, dev->master_cfg , DW_IC_CON);
i2c_dw_release_lock(dev);
@@ -480,7 +480,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
/* Disable the adapter */
__i2c_dw_enable_and_wait(dev, false);
- /* if the slave address is ten bit address, enable 10BITADDR */
+ /* If the slave address is ten bit address, enable 10BITADDR */
ic_con = dw_readl(dev, DW_IC_CON);
if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
ic_con |= DW_IC_CON_10BITADDR_MASTER;
@@ -503,7 +503,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
*/
dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
- /* enforce disabled interrupts (due to HW issues) */
+ /* Enforce disabled interrupts (due to HW issues) */
i2c_dw_disable_int(dev);
/* Enable the adapter */
@@ -537,9 +537,9 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
u32 flags = msgs[dev->msg_write_idx].flags;
/*
- * if target address has changed, we need to
- * reprogram the target address in the i2c
- * adapter when we are done with this transfer
+ * If target address has changed, we need to
+ * reprogram the target address in the I2C
+ * adapter when we are done with this transfer.
*/
if (msgs[dev->msg_write_idx].addr != addr) {
dev_err(dev->dev,
@@ -599,7 +599,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
- /* avoid rx buffer overrun */
+ /* Avoid rx buffer overrun */
if (dev->rx_outstanding >= dev->rx_fifo_depth)
break;
@@ -728,7 +728,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
}
/*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg.
*/
static int
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -759,10 +759,10 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (ret < 0)
goto done;
- /* start the transfers */
+ /* Start the transfers */
i2c_dw_xfer_init(dev);
- /* wait for tx to complete */
+ /* Wait for tx to complete */
if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
dev_err(dev->dev, "controller timed out\n");
/* i2c_dw_init implicitly disables the adapter */
@@ -786,7 +786,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
goto done;
}
- /* no error */
+ /* No error */
if (likely(!dev->cmd_err && !dev->status)) {
ret = num;
goto done;
@@ -821,8 +821,8 @@ static u32 i2c_dw_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm i2c_dw_algo = {
- .master_xfer = i2c_dw_xfer,
- .functionality = i2c_dw_func,
+ .master_xfer = i2c_dw_xfer,
+ .functionality = i2c_dw_func,
};
static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
@@ -903,7 +903,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
/*
* Anytime TX_ABRT is set, the contents of the tx/rx
- * buffers are flushed. Make sure to skip them.
+ * buffers are flushed. Make sure to skip them.
*/
dw_writel(dev, 0, DW_IC_INTR_MASK);
goto tx_aborted;
@@ -925,7 +925,7 @@ tx_aborted:
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
- /* workaround to trigger pending interrupt */
+ /* Workaround to trigger pending interrupt */
stat = dw_readl(dev, DW_IC_INTR_MASK);
i2c_dw_disable_int(dev);
dw_writel(dev, stat, DW_IC_INTR_MASK);
@@ -961,13 +961,13 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
{
struct i2c_adapter *adap = &dev->adapter;
unsigned long irq_flags;
- int r;
+ int ret;
init_completion(&dev->cmd_complete);
- r = i2c_dw_init(dev);
- if (r)
- return r;
+ ret = i2c_dw_init(dev);
+ if (ret)
+ return ret;
snprintf(adap->name, sizeof(adap->name),
"Synopsys DesignWare I2C adapter");
@@ -984,12 +984,12 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
}
i2c_dw_disable_int(dev);
- r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
- dev_name(dev->dev), dev);
- if (r) {
+ ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
+ dev_name(dev->dev), dev);
+ if (ret) {
dev_err(dev->dev, "failure requesting irq %i: %d\n",
- dev->irq, r);
- return r;
+ dev->irq, ret);
+ return ret;
}
/*
@@ -999,12 +999,12 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
* registered I2C slaves that do I2C transfers in their probe.
*/
pm_runtime_get_noresume(dev->dev);
- r = i2c_add_numbered_adapter(adap);
- if (r)
- dev_err(dev->dev, "failure adding adapter: %d\n", r);
+ ret = i2c_add_numbered_adapter(adap);
+ if (ret)
+ dev_err(dev->dev, "failure adding adapter: %d\n", ret);
pm_runtime_put_noidle(dev->dev);
- return r;
+ return ret;
}
EXPORT_SYMBOL_GPL(i2c_dw_probe);
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index a7cf429daf60..fe9b66898a72 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -49,7 +49,7 @@
* @cmd_complete: tx completion indicator
* @clk: input reference clock
* @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transfered
+ * @msgs: points to an array of messages currently being transferred
* @msgs_num: the number of elements in msgs
* @msg_write_idx: the element index of the current tx message in the msgs
* array
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d1263b82d646..613dfb88307f 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -21,27 +21,28 @@
* ----------------------------------------------------------------------------
*
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmi.h>
-#include <linux/i2c.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/of.h>
+#include <linux/platform_data/i2c-designware.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
-#include <linux/io.h>
#include <linux/reset.h>
+#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/acpi.h>
-#include <linux/platform_data/i2c-designware.h>
+
#include "i2c-designware-core.h"
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
@@ -209,11 +210,11 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
- struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
- struct resource *mem;
- int irq, r;
+ struct dw_i2c_dev *dev;
u32 acpi_speed, ht = 0;
+ struct resource *mem;
+ int irq, ret;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
@@ -276,12 +277,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
&& dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
dev_err(&pdev->dev,
"Only 100kHz, 400kHz, 1MHz and 3.4MHz supported");
- r = -EINVAL;
+ ret = -EINVAL;
goto exit_reset;
}
- r = i2c_dw_probe_lock_support(dev);
- if (r)
+ ret = i2c_dw_probe_lock_support(dev);
+ if (ret)
goto exit_reset;
dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
@@ -327,11 +328,11 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
}
- r = i2c_dw_probe(dev);
- if (r)
+ ret = i2c_dw_probe(dev);
+ if (ret)
goto exit_probe;
- return r;
+ return ret;
exit_probe:
if (!dev->pm_disabled)
@@ -339,7 +340,7 @@ exit_probe:
exit_reset:
if (!IS_ERR_OR_NULL(dev->rst))
reset_control_assert(dev->rst);
- return r;
+ return ret;
}
static int dw_i2c_plat_remove(struct platform_device *pdev)
@@ -423,7 +424,7 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
#define DW_I2C_DEV_PMOPS NULL
#endif
-/* work with hotplug and coldplug */
+/* Work with hotplug and coldplug */
MODULE_ALIAS("platform:i2c_designware");
static struct platform_driver dw_i2c_driver = {
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-30 22:28:55 +0100