20 files changed, 74 insertions, 48 deletions

diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 38319a69bd0a..d6d58684712b 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -232,9 +232,17 @@ static int i2c_inb(struct i2c_adapter *i2c_adap)
  * Sanity check for the adapter hardware - check the reaction of
  * the bus lines only if it seems to be idle.
  */
-static int test_bus(struct i2c_algo_bit_data *adap, char *name)
+static int test_bus(struct i2c_adapter *i2c_adap)
 {
-	int scl, sda;
+	struct i2c_algo_bit_data *adap = i2c_adap->algo_data;
+	const char *name = i2c_adap->name;
+	int scl, sda, ret;
+
+	if (adap->pre_xfer) {
+		ret = adap->pre_xfer(i2c_adap);
+		if (ret < 0)
+			return -ENODEV;
+	}
 
 	if (adap->getscl == NULL)
 		pr_info("%s: Testing SDA only, SCL is not readable\n", name);
@@ -297,11 +305,19 @@ static int test_bus(struct i2c_algo_bit_data *adap, char *name)
 		       "while pulling SCL high!\n", name);
 		goto bailout;
 	}
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
+
 	pr_info("%s: Test OK\n", name);
 	return 0;
 bailout:
 	sdahi(adap);
 	sclhi(adap);
+
+	if (adap->post_xfer)
+		adap->post_xfer(i2c_adap);
+
 	return -ENODEV;
 }
 
@@ -607,7 +623,7 @@ static int __i2c_bit_add_bus(struct i2c_adapter *adap,
 	int ret;
 
 	if (bit_test) {
-		ret = test_bus(bit_adap, adap->name);
+		ret = test_bus(adap);
 		if (ret < 0)
 			return -ENODEV;
 	}
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 2b9a8f54bb2c..4ca9cf9cde73 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -343,7 +343,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
 	ret = curmsg;
  out:
-	DEB1("}}} transfered %d/%d messages. "
+	DEB1("}}} transferred %d/%d messages. "
 	     "status is %#04x. control is %#04x\n",
 	     curmsg, num, pca_status(adap),
 	     pca_get_con(adap));
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 906a3ca50db6..dd364171f9c5 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -295,7 +295,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
 	}
 
 	/* Unfortunately the ALI SMB controller maps "no response" and "bus
-	 * collision" into a single bit. No reponse is the usual case so don't
+	 * collision" into a single bit. No response is the usual case so don't
 	 * do a printk.  This means that bus collisions go unreported.
 	 */
 	if (temp & ALI1535_STS_BUSERR) {
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index b14f6d68221d..83e8a60cdc86 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -318,7 +318,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 
 	/*
 	  Unfortunately the ALI SMB controller maps "no response" and "bus
-	  collision" into a single bit. No reponse is the usual case so don't
+	  collision" into a single bit. No response is the usual case so don't
 	  do a printk.
 	  This means that bus collisions go unreported.
 	*/
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 5795c8398c7c..a76d85fa3ad7 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -355,7 +355,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 	/*
 	 * Write mode register first as needed for correct behaviour
 	 * on OMAP-L138, but don't set STT yet to avoid a race with XRDY
-	 * occuring before we have loaded DXR
+	 * occurring before we have loaded DXR
 	 */
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
 
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b664ed8bbdb3..b7a51c43b185 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -178,7 +178,7 @@ static char *abort_sources[] = {
  * @lock: protect this struct and IO registers
  * @clk: input reference clock
  * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transfered
+ * @msgs: points to an array of messages currently being transferred
  * @msgs_num: the number of elements in msgs
  * @msg_write_idx: the element index of the current tx message in the msgs
  *	array
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index e5b1a3bf5b80..37e2e82a9c88 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
    Frodo Looijaard <frodol@dds.nl> */
 
-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
+/* Partially rewriten by Oleg I. Vdovikin for mmapped support of
    for Alpha Processor Inc. UP-2000(+) boards */
 
 #include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ed2e0c5ea37c..455e909bc768 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -96,7 +96,7 @@
 #define SMBHSTCFG_SMB_SMI_EN	2
 #define SMBHSTCFG_I2C_EN	4
 
-/* Auxillary control register bits, ICH4+ only */
+/* Auxiliary control register bits, ICH4+ only */
 #define SMBAUXCTL_CRC		1
 #define SMBAUXCTL_E32B		2
 
@@ -134,10 +134,15 @@
 				 SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \
 				 SMBHSTSTS_INTR)
 
+/* Older devices have their ID defined in <linux/pci_ids.h> */
+#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS	0x1c22
+#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS	0x1d22
 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0	0x1d70
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1	0x1d71
 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2	0x1d72
+#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
+#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 
 struct i801_priv {
 	struct i2c_adapter adapter;
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index e4f88dca99b5..3c110fbc409b 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -494,7 +494,7 @@ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
 		if (unlikely(ret < 0))
 			break;
 		else if (unlikely(ret != count)){
-			DBG("%d: xfer_bytes, requested %d, transfered %d\n",
+			DBG("%d: xfer_bytes, requested %d, transferred %d\n",
 				dev->idx, count, ret);
 
 			/* If it's not a last part of xfer, abort it */
@@ -593,7 +593,7 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
 		DBG("%d: iic_xfer, bus is not free\n", dev->idx);
 
-		/* Usually it means something serious has happend.
+		/* Usually it means something serious has happened.
 		 * We *cannot* have unfinished previous transfer
 		 * so it doesn't make any sense to try to stop it.
 		 * Probably we were not able to recover from the
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
index c71492782bbd..e828ac85cfa7 100644
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -170,8 +170,8 @@ struct intel_mid_i2c_private {
 /* Raw Interrupt Status Register */
 #define IC_RAW_INTR_STAT	0x34		/* Read Only */
 #define GEN_CALL		(1 << 11)	/* General call */
-#define START_DET		(1 << 10)	/* (RE)START occured */
-#define STOP_DET		(1 << 9)	/* STOP occured */
+#define START_DET		(1 << 10)	/* (RE)START occurred */
+#define STOP_DET		(1 << 9)	/* STOP occurred */
 #define ACTIVITY		(1 << 8)	/* Bus busy */
 #define RX_DONE			(1 << 7)	/* Not used in Master mode */
 #define	TX_ABRT			(1 << 6)	/* Transmit Abort */
@@ -375,7 +375,7 @@ static int intel_mid_i2c_disable(struct i2c_adapter *adap)
  * I2C should be disabled prior to other register operation. If failed, an
  * errno is returned. Mask and Clear all interrpts, this should be done at
  * first.  Set common registers which will not be modified during normal
- * transfers, including: controll register, FIFO threshold and clock freq.
+ * transfers, including: control register, FIFO threshold and clock freq.
  * Check APB data width at last.
  */
 static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
@@ -455,7 +455,7 @@ static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
  *
  * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
  * distingushed. At present, no circumstances have been found out that
- * multiple errors would be occured simutaneously, so we simply use the
+ * multiple errors would be occurred simutaneously, so we simply use the
  * register value directly.
  *
  * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
@@ -469,7 +469,7 @@ static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
 
 	/* Single transfer error check:
 	 * According to databook, TX/RX FIFOs would be flushed when
-	 * the abort interrupt occured.
+	 * the abort interrupt occurred.
 	 */
 	if (abort & ABRT_MASTER_DIS)
 		dev_err(&adap->dev,
@@ -569,7 +569,7 @@ static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
  * Return Values:
  * 0	if the read transfer succeeds
  * -ETIMEDOUT	if we cannot read the "raw" interrupt register
- * -EINVAL	if a transfer abort occured
+ * -EINVAL	if a transfer abort occurred
  *
  * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
  * data transfer. The actual "write" operation will be performed when the
@@ -697,7 +697,7 @@ static int intel_mid_i2c_setup(struct i2c_adapter *adap,  struct i2c_msg *pmsg)
  * @num: number of i2c_msg
  *
  * Return Values:
- * +		number of messages transfered
+ * +		number of messages transferred
  * -ETIMEDOUT	If cannot disable I2C controller or read IC_STATUS
  * -EINVAL	If the address in i2c_msg is invalid
  *
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index ddc258edb34f..0682f8f277b0 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -141,7 +141,7 @@ static int sch_transaction(void)
  * This is the main access entry for i2c-sch access
  * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write
  * (0 for read and 1 for write), size is i2c transaction type and data is the
- * union of transaction for data to be transfered or data read from bus.
+ * union of transaction for data to be transferred or data read from bus.
  * return 0 for success and others for failure.
  */
 static s32 sch_access(struct i2c_adapter *adap, u16 addr,
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index caf96dc8ca1b..7e78f7c87857 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -149,7 +149,7 @@ static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
 	 * We have to copy the slave address (u8) and buffer (arbitrary number
 	 * of u8) into the data register (u32). To achieve that, the u8 are put
 	 * into the MSBs of 'data' which is then shifted for the next u8. When
-	 * apropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
+	 * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
 	 * looks like this:
 	 *
 	 *  3          2          1          0
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 594ed5059c4a..e10e5cf3751a 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -126,9 +126,9 @@ enum i2c_operation {
 /**
  * struct i2c_nmk_client - client specific data
  * @slave_adr: 7-bit slave address
- * @count: no. bytes to be transfered
+ * @count: no. bytes to be transferred
  * @buffer: client data buffer
- * @xfer_bytes: bytes transfered till now
+ * @xfer_bytes: bytes transferred till now
  * @operation: current I2C operation
  */
 struct i2c_nmk_client {
@@ -330,7 +330,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	 * slsu defines the data setup time after SCL clock
 	 * stretching in terms of i2c clk cycles. The
 	 * needed setup time for the three modes are 250ns,
-	 * 100ns, 10ns repectively thus leading to the values
+	 * 100ns, 10ns respectively thus leading to the values
 	 * of 14, 6, 2 for a 48 MHz i2c clk.
 	 */
 	writel(dev->cfg.slsu << 16, dev->virtbase + I2C_SCR);
@@ -364,7 +364,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
 	/*
 	 * set the speed mode. Currently we support
 	 * only standard and fast mode of operation
-	 * TODO - support for fast mode plus (upto 1Mb/s)
+	 * TODO - support for fast mode plus (up to 1Mb/s)
 	 * and high speed (up to 3.4 Mb/s)
 	 */
 	if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 1b46a9d9f907..fee1a2613861 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -49,6 +49,7 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/core.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
@@ -305,7 +306,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
 		return -EIO;
 	}
 
-	pdata = pdev->dev.platform_data;
+	pdata = mfd_get_data(pdev);
 	if (pdata) {
 		i2c->regstep = pdata->regstep;
 		i2c->clock_khz = pdata->clock_khz;
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 0eb1515541e7..2dbba163b102 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -1,7 +1,7 @@
 /* ------------------------------------------------------------------------ *
  * i2c-parport.c I2C bus over parallel port                                 *
  * ------------------------------------------------------------------------ *
-   Copyright (C) 2003-2010 Jean Delvare <khali@linux-fr.org>
+   Copyright (C) 2003-2011 Jean Delvare <khali@linux-fr.org>
    
    Based on older i2c-philips-par.c driver
    Copyright (C) 1995-2000 Simon G. Vogl
@@ -33,6 +33,8 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-smbus.h>
 #include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
 #include "i2c-parport.h"
 
 /* ----- Device list ------------------------------------------------------ */
@@ -43,10 +45,11 @@ struct i2c_par {
 	struct i2c_algo_bit_data algo_data;
 	struct i2c_smbus_alert_setup alert_data;
 	struct i2c_client *ara;
-	struct i2c_par *next;
+	struct list_head node;
 };
 
-static struct i2c_par *adapter_list;
+static LIST_HEAD(adapter_list);
+static DEFINE_MUTEX(adapter_list_lock);
 
 /* ----- Low-level parallel port access ----------------------------------- */
 
@@ -228,8 +231,9 @@ static void i2c_parport_attach (struct parport *port)
 	}
 
 	/* Add the new adapter to the list */
-	adapter->next = adapter_list;
-	adapter_list = adapter;
+	mutex_lock(&adapter_list_lock);
+	list_add_tail(&adapter->node, &adapter_list);
+	mutex_unlock(&adapter_list_lock);
         return;
 
 ERROR1:
@@ -241,11 +245,11 @@ ERROR0:
 
 static void i2c_parport_detach (struct parport *port)
 {
-	struct i2c_par *adapter, *prev;
+	struct i2c_par *adapter, *_n;
 
 	/* Walk the list */
-	for (prev = NULL, adapter = adapter_list; adapter;
-	     prev = adapter, adapter = adapter->next) {
+	mutex_lock(&adapter_list_lock);
+	list_for_each_entry_safe(adapter, _n, &adapter_list, node) {
 		if (adapter->pdev->port == port) {
 			if (adapter->ara) {
 				parport_disable_irq(port);
@@ -259,14 +263,11 @@ static void i2c_parport_detach (struct parport *port)
 				
 			parport_release(adapter->pdev);
 			parport_unregister_device(adapter->pdev);
-			if (prev)
-				prev->next = adapter->next;
-			else
-				adapter_list = adapter->next;
+			list_del(&adapter->node);
 			kfree(adapter);
-			return;
 		}
 	}
+	mutex_unlock(&adapter_list_lock);
 }
 
 static struct parport_driver i2c_parport_driver = {
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index cadc0216e02f..cb5d01e279c6 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -318,7 +318,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev)
 	rc = request_irq(iface->irq, s6i2c_interrupt_entry,
 			 IRQF_SHARED, dev->name, iface);
 	if (rc) {
-		dev_err(&p_adap->dev, "s6i2c: cant get IRQ %d\n", iface->irq);
+		dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq);
 		goto err_clk_dis;
 	}
 
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 266135ddf7fa..99879617e686 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 	u32 val;
 	int i = 0;
 
-	/* Locate the apropriate clock setting */
+	/* Locate the appropriate clock setting */
 	while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
 	       stu300_clktable[i].rate < clkrate)
 		i++;
@@ -644,7 +644,7 @@ static int stu300_send_address(struct stu300_dev *dev,
 	ret = stu300_await_event(dev, STU300_EVENT_6);
 
 	/*
-	 * Clear any pending EVENT 6 no matter what happend during
+	 * Clear any pending EVENT 6 no matter what happened during
 	 * await_event.
 	 */
 	val = stu300_r8(dev->virtbase + I2C_CR);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3921f664c9c3..b4ab39b741eb 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -386,7 +386,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 	return IRQ_HANDLED;
 err:
-	/* An error occured, mask all interrupts */
+	/* An error occurred, mask all interrupts */
 	tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
 		I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
 		I2C_INT_RX_FIFO_DATA_REQ);
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index a9c419e075a5..e9d5ff4d1496 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -21,7 +21,7 @@
  * to the automotive development board Russellville. The copyright holder
  * as seen in the header is Intel corporation.
  * Mocean Laboratories forked off the GNU/Linux platform work into a
- * separate company called Pelagicore AB, which commited the code to the
+ * separate company called Pelagicore AB, which committed the code to the
  * kernel.
  */
 
@@ -34,6 +34,7 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/core.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
@@ -704,7 +705,7 @@ static int __devinit xiic_i2c_probe(struct platform_device *pdev)
 	if (irq < 0)
 		goto resource_missing;
 
-	pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
+	pdata = mfd_get_data(pdev);
 	if (!pdata)
 		return -EINVAL;
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e5f76a0372fd..9a58994ff7ea 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -348,7 +348,7 @@ EXPORT_SYMBOL(i2c_verify_client);
 
 
 /* This is a permissive address validity check, I2C address map constraints
- * are purposedly not enforced, except for the general call address. */
+ * are purposely not enforced, except for the general call address. */
 static int i2c_check_client_addr_validity(const struct i2c_client *client)
 {
 	if (client->flags & I2C_CLIENT_TEN) {
@@ -797,7 +797,8 @@ static int i2c_do_add_adapter(struct i2c_driver *driver,
 
 	/* Let legacy drivers scan this bus for matching devices */
 	if (driver->attach_adapter) {
-		dev_warn(&adap->dev, "attach_adapter method is deprecated\n");
+		dev_warn(&adap->dev, "%s: attach_adapter method is deprecated\n",
+			 driver->driver.name);
 		dev_warn(&adap->dev, "Please use another way to instantiate "
 			 "your i2c_client\n");
 		/* We ignore the return code; if it fails, too bad */
@@ -984,7 +985,8 @@ static int i2c_do_del_adapter(struct i2c_driver *driver,
 
 	if (!driver->detach_adapter)
 		return 0;
-	dev_warn(&adapter->dev, "detach_adapter method is deprecated\n");
+	dev_warn(&adapter->dev, "%s: detach_adapter method is deprecated\n",
+		 driver->driver.name);
 	res = driver->detach_adapter(adapter);
 	if (res)
 		dev_err(&adapter->dev, "detach_adapter failed (%d) "