diff options
Diffstat (limited to 'drivers/i2c')
39 files changed, 1476 insertions, 334 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 96867347bcbf..711ca08ab776 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -38,6 +38,20 @@ config I2C_CHARDEV This support is also available as a module. If so, the module will be called i2c-dev. +config I2C_HELPER_AUTO + bool "Autoselect pertinent helper modules" + default y + help + Some I2C bus drivers require so-called "I2C algorithm" modules + to work. These are basically software-only abstractions of generic + I2C interfaces. This option will autoselect them so that you don't + have to care. + + Unselect this only if you need to enable additional helper + modules, for example for use with external I2C bus drivers. + + In doubt, say Y. + source drivers/i2c/algos/Kconfig source drivers/i2c/busses/Kconfig source drivers/i2c/chips/Kconfig diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig index 7137a17402fe..b788579b8227 100644 --- a/drivers/i2c/algos/Kconfig +++ b/drivers/i2c/algos/Kconfig @@ -2,15 +2,20 @@ # I2C algorithm drivers configuration # +menu "I2C Algorithms" + depends on !I2C_HELPER_AUTO + config I2C_ALGOBIT - tristate + tristate "I2C bit-banging interfaces" config I2C_ALGOPCF - tristate + tristate "I2C PCF 8584 interfaces" config I2C_ALGOPCA - tristate + tristate "I2C PCA 9564 interfaces" config I2C_ALGO_SGI tristate depends on SGI_IP22 || SGI_IP32 || X86_VISWS + +endmenu diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 1e328d19cd6d..3e01992230b8 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -135,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) { *status = get_pcf(adap, 1); #ifndef STUB_I2C while (timeout-- && (*status & I2C_PCF_PIN)) { - adap->waitforpin(); + adap->waitforpin(adap->data); *status = get_pcf(adap, 1); } if (*status & I2C_PCF_LAB) { @@ -208,7 +208,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap) return -ENXIO; } - printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n"); + printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n"); return 0; } @@ -331,13 +331,16 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, int i; int ret=0, timeout, status; + if (adap->xfer_begin) + adap->xfer_begin(adap->data); /* Check for bus busy */ timeout = wait_for_bb(adap); if (timeout) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: " "Timeout waiting for BB in pcf_xfer\n");) - return -EIO; + i = -EIO; + goto out; } for (i = 0;ret >= 0 && i < num; i++) { @@ -359,12 +362,14 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (timeout) { if (timeout == -EINTR) { /* arbitration lost */ - return (-EINTR); + i = -EINTR; + goto out; } i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting " "for PIN(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #ifndef STUB_I2C @@ -372,7 +377,8 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (status & I2C_PCF_LRB) { i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #endif @@ -404,6 +410,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, } } +out: + if (adap->xfer_end) + adap->xfer_end(adap->data); return (i); } diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 6ee997b2817c..7f95905bbb9d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -55,7 +55,7 @@ config I2C_AMD756 config I2C_AMD756_S4882 tristate "SMBus multiplexing on the Tyan S4882" - depends on I2C_AMD756 && EXPERIMENTAL + depends on I2C_AMD756 && X86 && EXPERIMENTAL help Enabling this option will add specific SMBus support for the Tyan S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed @@ -97,6 +97,7 @@ config I2C_I801 ICH9 Tolapai ICH10 + PCH This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -148,7 +149,7 @@ config I2C_NFORCE2 config I2C_NFORCE2_S4985 tristate "SMBus multiplexing on the Tyan S4985" - depends on I2C_NFORCE2 && EXPERIMENTAL + depends on I2C_NFORCE2 && X86 && EXPERIMENTAL help Enabling this option will add specific SMBus support for the Tyan S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed @@ -209,7 +210,7 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA VT82C596/82C686/82xx and CX700" + tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820" depends on PCI help If you say yes to this option, support will be included for the VIA @@ -223,6 +224,8 @@ config I2C_VIAPRO VT8237R/A/S VT8251 CX700 + VX800 + VX820 This driver can also be built as a module. If so, the module will be called i2c-viapro. @@ -330,6 +333,18 @@ config I2C_GPIO This is a very simple bitbanging I2C driver utilizing the arch-neutral GPIO API to control the SCL and SDA lines. +config I2C_HIGHLANDER + tristate "Highlander FPGA SMBus interface" + depends on SH_HIGHLANDER + help + If you say yes to this option, support will be included for + the SMBus interface located in the FPGA on various Highlander + boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL + FPGAs. This is wholly unrelated to the SoC I2C. + + This driver can also be built as a module. If so, the module + will be called i2c-highlander. + config I2C_IBM_IIC tristate "IBM PPC 4xx on-chip I2C interface" depends on 4xx diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 97dbfa2107fe..0c2c4b26cdf1 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o +obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 7c2be3558a24..75089febbc13 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -16,7 +16,7 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/io.h> #include <asm/hardware/ioc.h> #include <asm/system.h> diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 72872d1e63ef..8ba2bcf727d3 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -155,6 +155,9 @@ static int __init amd756_s4882_init(void) int i, error; union i2c_smbus_data ioconfig; + if (!amd756_smbus.dev.parent) + return -ENODEV; + /* Configure the PCA9556 multiplexer */ ioconfig.byte = 0x00; /* All I/O to output mode */ error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03, @@ -168,11 +171,7 @@ static int __init amd756_s4882_init(void) /* Unregister physical bus */ error = i2c_del_adapter(&amd756_smbus); if (error) { - if (error == -EINVAL) - error = -ENODEV; - else - dev_err(&amd756_smbus.dev, "Physical bus removal " - "failed\n"); + dev_err(&amd756_smbus.dev, "Physical bus removal failed\n"); goto ERROR0; } diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 1ea39254dac6..424dad6f18d8 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -332,10 +332,6 @@ static int __devinit amd756_probe(struct pci_dev *pdev, int error; u8 temp; - /* driver_data might come from user-space, so check it */ - if (id->driver_data >= ARRAY_SIZE(chipname)) - return -EINVAL; - if (amd756_ioport) { dev_err(&pdev->dev, "Only one device supported " "(you have a strange motherboard, btw)\n"); @@ -412,7 +408,6 @@ static struct pci_driver amd756_driver = { .id_table = amd756_ids, .probe = amd756_probe, .remove = __devexit_p(amd756_remove), - .dynids.use_driver_data = 1, }; static int __init amd756_init(void) diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 73d61946a534..9efb02137254 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -14,7 +14,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/kernel.h> #include <linux/err.h> #include <linux/slab.h> @@ -27,9 +26,9 @@ #include <asm/io.h> -#include <asm/arch/at91_twi.h> -#include <asm/arch/board.h> -#include <asm/arch/cpu.h> +#include <mach/at91_twi.h> +#include <mach/board.h> +#include <mach/cpu.h> #define TWI_CLOCK 100000 /* Hz. max 400 Kbits/sec */ diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 48d084bdf7c8..3c855ff2992f 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -49,6 +49,8 @@ struct bfin_twi_iface { struct i2c_msg *pmsg; int msg_num; int cur_msg; + u16 saved_clkdiv; + u16 saved_control; void __iomem *regs_base; }; @@ -565,32 +567,43 @@ static u32 bfin_twi_functionality(struct i2c_adapter *adap) I2C_FUNC_I2C; } - static struct i2c_algorithm bfin_twi_algorithm = { .master_xfer = bfin_twi_master_xfer, .smbus_xfer = bfin_twi_smbus_xfer, .functionality = bfin_twi_functionality, }; - -static int i2c_bfin_twi_suspend(struct platform_device *dev, pm_message_t state) +static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state) { - struct bfin_twi_iface *iface = platform_get_drvdata(dev); + struct bfin_twi_iface *iface = platform_get_drvdata(pdev); + + iface->saved_clkdiv = read_CLKDIV(iface); + iface->saved_control = read_CONTROL(iface); + + free_irq(iface->irq, iface); /* Disable TWI */ - write_CONTROL(iface, read_CONTROL(iface) & ~TWI_ENA); - SSYNC(); + write_CONTROL(iface, iface->saved_control & ~TWI_ENA); return 0; } -static int i2c_bfin_twi_resume(struct platform_device *dev) +static int i2c_bfin_twi_resume(struct platform_device *pdev) { - struct bfin_twi_iface *iface = platform_get_drvdata(dev); + struct bfin_twi_iface *iface = platform_get_drvdata(pdev); - /* Enable TWI */ - write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA); - SSYNC(); + int rc = request_irq(iface->irq, bfin_twi_interrupt_entry, + IRQF_DISABLED, pdev->name, iface); + if (rc) { + dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); + return -ENODEV; + } + + /* Resume TWI interface clock as specified */ + write_CLKDIV(iface, iface->saved_clkdiv); + + /* Resume TWI */ + write_CONTROL(iface, iface->saved_control); return 0; } diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 8164de1f4d72..228f75723063 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -423,7 +423,6 @@ static const struct i2c_adapter cpm_ops = { .owner = THIS_MODULE, .name = "i2c-cpm", .algo = &cpm_i2c_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, }; static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index af3846eda985..5d7789834b95 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -36,10 +36,9 @@ #include <linux/platform_device.h> #include <linux/io.h> -#include <asm/hardware.h> -#include <asm/mach-types.h> +#include <mach/hardware.h> -#include <asm/arch/i2c.h> +#include <mach/i2c.h> /* ----- global defines ----------------------------------------------- */ diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 7f38c01fb3a0..0ed3ccb81b63 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -104,7 +104,8 @@ static int pcf_isa_getclock(void *data) return (clock); } -static void pcf_isa_waitforpin(void) { +static void pcf_isa_waitforpin(void *data) +{ DEFINE_WAIT(wait); int timeout = 2; unsigned long flags; diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 79b455a1f090..32104eac8d3d 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -77,7 +77,7 @@ static int i2c_gpio_getscl(void *data) return gpio_get_value(pdata->scl_pin); } -static int __init i2c_gpio_probe(struct platform_device *pdev) +static int __devinit i2c_gpio_probe(struct platform_device *pdev) { struct i2c_gpio_platform_data *pdata; struct i2c_algo_bit_data *bit_data; @@ -174,7 +174,7 @@ err_alloc_adap: return ret; } -static int __exit i2c_gpio_remove(struct platform_device *pdev) +static int __devexit i2c_gpio_remove(struct platform_device *pdev) { struct i2c_gpio_platform_data *pdata; struct i2c_adapter *adap; @@ -196,14 +196,15 @@ static struct platform_driver i2c_gpio_driver = { .name = "i2c-gpio", .owner = THIS_MODULE, }, - .remove = __exit_p(i2c_gpio_remove), + .probe = i2c_gpio_probe, + .remove = __devexit_p(i2c_gpio_remove), }; static int __init i2c_gpio_init(void) { int ret; - ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe); + ret = platform_driver_register(&i2c_gpio_driver); if (ret) printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret); diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c new file mode 100644 index 000000000000..f4d22ae9d294 --- /dev/null +++ b/drivers/i2c/busses/i2c-highlander.c @@ -0,0 +1,498 @@ +/* + * Renesas Solutions Highlander FPGA I2C/SMBus support. + * + * Supported devices: R0P7780LC0011RL, R0P7785LC0011RL + * + * Copyright (C) 2008 Paul Mundt + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Atom Create Engineering Co., Ltd. + * + * This file is subject to the terms and conditions of the GNU General + * Public License version 2. See the file "COPYING" in the main directory + * of this archive for more details. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/completion.h> +#include <linux/io.h> +#include <linux/delay.h> + +#define SMCR 0x00 +#define SMCR_START (1 << 0) +#define SMCR_IRIC (1 << 1) +#define SMCR_BBSY (1 << 2) +#define SMCR_ACKE (1 << 3) +#define SMCR_RST (1 << 4) +#define SMCR_IEIC (1 << 6) + +#define SMSMADR 0x02 + +#define SMMR 0x04 +#define SMMR_MODE0 (1 << 0) +#define SMMR_MODE1 (1 << 1) +#define SMMR_CAP (1 << 3) +#define SMMR_TMMD (1 << 4) +#define SMMR_SP (1 << 7) + +#define SMSADR 0x06 +#define SMTRDR 0x46 + +struct highlander_i2c_dev { + struct device *dev; + void __iomem *base; + struct i2c_adapter adapter; + struct completion cmd_complete; + unsigned long last_read_time; + int irq; + u8 *buf; + size_t buf_len; +}; + +static int iic_force_poll, iic_force_normal; +static int iic_timeout = 1000, iic_read_delay; + +static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_IEIC, dev->base + SMCR); +} + +static inline void highlander_i2c_irq_disable(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) & ~SMCR_IEIC, dev->base + SMCR); +} + +static inline void highlander_i2c_start(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_START, dev->base + SMCR); +} + +static inline void highlander_i2c_done(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_IRIC, dev->base + SMCR); +} + +static void highlander_i2c_setup(struct highlander_i2c_dev *dev) +{ + u16 smmr; + + smmr = ioread16(dev->base + SMMR); + smmr |= SMMR_TMMD; + + if (iic_force_normal) + smmr &= ~SMMR_SP; + else + smmr |= SMMR_SP; + + iowrite16(smmr, dev->base + SMMR); +} + +static void smbus_write_data(u8 *src, u16 *dst, int len) +{ + for (; len > 1; len -= 2) { + *dst++ = be16_to_cpup((u16 *)src); + src += 2; + } + + if (len) + *dst = *src << 8; +} + +static void smbus_read_data(u16 *src, u8 *dst, int len) +{ + for (; len > 1; len -= 2) { + *(u16 *)dst = cpu_to_be16p(src++); + dst += 2; + } + + if (len) + *dst = *src >> 8; +} + +static void highlander_i2c_command(struct highlander_i2c_dev *dev, + u8 command, int len) +{ + unsigned int i; + u16 cmd = (command << 8) | command; + + for (i = 0; i < len; i += 2) { + if (len - i == 1) + cmd = command << 8; + iowrite16(cmd, dev->base + SMSADR + i); + dev_dbg(dev->dev, "command data[%x] 0x%04x\n", i/2, cmd); + } +} + +static int highlander_i2c_wait_for_bbsy(struct highlander_i2c_dev *dev) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(iic_timeout); + while (ioread16(dev->base + SMCR) & SMCR_BBSY) { + if (time_after(jiffies, timeout)) { + dev_warn(dev->dev, "timeout waiting for bus ready\n"); + return -ETIMEDOUT; + } + + msleep(1); + } + + return 0; +} + +static int highlander_i2c_reset(struct highlander_i2c_dev *dev) +{ + iowrite16(ioread16(dev->base + SMCR) | SMCR_RST, dev->base + SMCR); + return highlander_i2c_wait_for_bbsy(dev); +} + +static int highlander_i2c_wait_for_ack(struct highlander_i2c_dev *dev) +{ + u16 tmp = ioread16(dev->base + SMCR); + + if ((tmp & (SMCR_IRIC | SMCR_ACKE)) == SMCR_ACKE) { + dev_warn(dev->dev, "ack abnormality\n"); + return highlander_i2c_reset(dev); + } + + return 0; +} + +static irqreturn_t highlander_i2c_irq(int irq, void *dev_id) +{ + struct highlander_i2c_dev *dev = dev_id; + + highlander_i2c_done(dev); + complete(&dev->cmd_complete); + + return IRQ_HANDLED; +} + +static void highlander_i2c_poll(struct highlander_i2c_dev *dev) +{ + unsigned long timeout; + u16 smcr; + + timeout = jiffies + msecs_to_jiffies(iic_timeout); + for (;;) { + smcr = ioread16(dev->base + SMCR); + + /* + * Don't bother checking ACKE here, this and the reset + * are handled in highlander_i2c_wait_xfer_done() when + * waiting for the ACK. + */ + + if (smcr & SMCR_IRIC) + return; + if (time_after(jiffies, timeout)) + break; + + cpu_relax(); + cond_resched(); + } + + dev_err(dev->dev, "polling timed out\n"); +} + +static inline int highlander_i2c_wait_xfer_done(struct highlander_i2c_dev *dev) +{ + if (dev->irq) + wait_for_completion_timeout(&dev->cmd_complete, + msecs_to_jiffies(iic_timeout)); + else + /* busy looping, the IRQ of champions */ + highlander_i2c_poll(dev); + + return highlander_i2c_wait_for_ack(dev); +} + +static int highlander_i2c_read(struct highlander_i2c_dev *dev) +{ + int i, cnt; + u16 data[16]; + + if (highlander_i2c_wait_for_bbsy(dev)) + return -EAGAIN; + + highlander_i2c_start(dev); + + if (highlander_i2c_wait_xfer_done(dev)) { + dev_err(dev->dev, "Arbitration loss\n"); + return -EAGAIN; + } + + /* + * The R0P7780LC0011RL FPGA needs a significant delay between + * data read cycles, otherwise the transciever gets confused and + * garbage is returned when the read is subsequently aborted. + * + * It is not sufficient to wait for BBSY. + * + * While this generally only applies to the older SH7780-based + * Highlanders, the same issue can be observed on SH7785 ones, + * albeit less frequently. SH7780-based Highlanders may need + * this to be as high as 1000 ms. + */ + if (iic_read_delay && time_before(jiffies, dev->last_read_time + + msecs_to_jiffies(iic_read_delay))) + msleep(jiffies_to_msecs((dev->last_read_time + + msecs_to_jiffies(iic_read_delay)) - jiffies)); + + cnt = (dev->buf_len + 1) >> 1; + for (i = 0; i < cnt; i++) { + data[i] = ioread16(dev->base + SMTRDR + (i * sizeof(u16))); + dev_dbg(dev->dev, "read data[%x] 0x%04x\n", i, data[i]); + } + + smbus_read_data(data, dev->buf, dev->buf_len); + + dev->last_read_time = jiffies; + + return 0; +} + +static int highlander_i2c_write(struct highlander_i2c_dev *dev) +{ + int i, cnt; + u16 data[16]; + + smbus_write_data(dev->buf, data, dev->buf_len); + + cnt = (dev->buf_len + 1) >> 1; + for (i = 0; i < cnt; i++) { + iowrite16(data[i], dev->base + SMTRDR + (i * sizeof(u16))); + dev_dbg(dev->dev, "write data[%x] 0x%04x\n", i, data[i]); + } + + if (highlander_i2c_wait_for_bbsy(dev)) + return -EAGAIN; + + highlander_i2c_start(dev); + + return highlander_i2c_wait_xfer_done(dev); +} + +static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + struct highlander_i2c_dev *dev = i2c_get_adapdata(adap); + int read = read_write & I2C_SMBUS_READ; + u16 tmp; + + init_completion(&dev->cmd_complete); + + dev_dbg(dev->dev, "addr %04x, command %02x, read_write %d, size %d\n", + addr, command, read_write, size); + + /* + * Set up the buffer and transfer size + */ + switch (size) { + case I2C_SMBUS_BYTE_DATA: + dev->buf = &data->byte; + dev->buf_len = 1; + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + dev->buf = &data->block[1]; + dev->buf_len = data->block[0]; + break; + default: + dev_err(dev->dev, "unsupported command %d\n", size); + return -EINVAL; + } + + /* + * Encode the mode setting + */ + tmp = ioread16(dev->base + SMMR); + tmp &= ~(SMMR_MODE0 | SMMR_MODE1); + + switch (dev->buf_len) { + case 1: + /* default */ + break; + case 8: + tmp |= SMMR_MODE0; + break; + case 16: + tmp |= SMMR_MODE1; + break; + case 32: + tmp |= (SMMR_MODE0 | SMMR_MODE1); + break; + default: + dev_err(dev->dev, "unsupported xfer size %d\n", dev->buf_len); + return -EINVAL; + } + + iowrite16(tmp, dev->base + SMMR); + + /* Ensure we're in a sane state */ + highlander_i2c_done(dev); + + /* Set slave address */ + iowrite16((addr << 1) | read, dev->base + SMSMADR); + + highlander_i2c_command(dev, command, dev->buf_len); + + if (read) + return highlander_i2c_read(dev); + else + return highlander_i2c_write(dev); +} + +static u32 highlander_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static const struct i2c_algorithm highlander_i2c_algo = { + .smbus_xfer = highlander_i2c_smbus_xfer, + .functionality = highlander_i2c_func, +}; + +static int __devinit highlander_i2c_probe(struct platform_device *pdev) +{ + struct highlander_i2c_dev *dev; + struct i2c_adapter *adap; + struct resource *res; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "no mem resource\n"); + return -ENODEV; + } + + dev = kzalloc(sizeof(struct highlander_i2c_dev), GFP_KERNEL); + if (unlikely(!dev)) + return -ENOMEM; + + dev->base = ioremap_nocache(res->start, res->end - res->start + 1); + if (unlikely(!dev->base)) { + ret = -ENXIO; + goto err; + } + + dev->dev = &pdev->dev; + platform_set_drvdata(pdev, dev); + + dev->irq = platform_get_irq(pdev, 0); + if (iic_force_poll) + dev->irq = 0; + + if (dev->irq) { + ret = request_irq(dev->irq, highlander_i2c_irq, IRQF_DISABLED, + pdev->name, dev); + if (unlikely(ret)) + goto err_unmap; + + highlander_i2c_irq_enable(dev); + } else { + dev_notice(&pdev->dev, "no IRQ, using polling mode\n"); + highlander_i2c_irq_disable(dev); + } + + dev->last_read_time = jiffies; /* initial read jiffies */ + + highlander_i2c_setup(dev); + + adap = &dev->adapter; + i2c_set_adapdata(adap, dev); + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON; + strlcpy(adap->name, "HL FPGA I2C adapter", sizeof(adap->name)); + adap->algo = &highlander_i2c_algo; + adap->dev.parent = &pdev->dev; + adap->nr = pdev->id; + + /* + * Reset the adapter + */ + ret = highlander_i2c_reset(dev); + if (unlikely(ret)) { + dev_err(&pdev->dev, "controller didn't come up\n"); + goto err_free_irq; + } + + ret = i2c_add_numbered_adapter(adap); + if (unlikely(ret)) { + dev_err(&pdev->dev, "failure adding adapter\n"); + goto err_free_irq; + } + + return 0; + +err_free_irq: + if (dev->irq) + free_irq(dev->irq, dev); +err_unmap: + iounmap(dev->base); +err: + kfree(dev); + + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int __devexit highlander_i2c_remove(struct platform_device *pdev) +{ + struct highlander_i2c_dev *dev = platform_get_drvdata(pdev); + + i2c_del_adapter(&dev->adapter); + + if (dev->irq) + free_irq(dev->irq, dev); + + iounmap(dev->base); + kfree(dev); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver highlander_i2c_driver = { + .driver = { + .name = "i2c-highlander", + .owner = THIS_MODULE, + }, + + .probe = highlander_i2c_probe, + .remove = __devexit_p(highlander_i2c_remove), +}; + +static int __init highlander_i2c_init(void) +{ + return platform_driver_register(&highlander_i2c_driver); +} + +static void __exit highlander_i2c_exit(void) +{ + platform_driver_unregister(&highlander_i2c_driver); +} + +module_init(highlander_i2c_init); +module_exit(highlander_i2c_exit); + +MODULE_AUTHOR("Paul Mundt"); +MODULE_DESCRIPTION("Renesas Highlander FPGA I2C/SMBus adapter"); +MODULE_LICENSE("GPL v2"); + +module_param(iic_force_poll, bool, 0); +module_param(iic_force_normal, bool, 0); +module_param(iic_timeout, int, 0); +module_param(iic_read_delay, int, 0); + +MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); +MODULE_PARM_DESC(iic_force_normal, + "Force normal mode (100 kHz), default is fast mode (400 kHz)"); +MODULE_PARM_DESC(iic_timeout, "Set timeout value in msecs (default 1000 ms)"); +MODULE_PARM_DESC(iic_read_delay, + "Delay between data read cycles (default 0 ms)"); diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 1098f21ace13..648aa7baff83 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev, hydra_adap.name)) return -EBUSY; - hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0)); + hydra_bit_data.data = pci_ioremap_bar(dev, 0); if (hydra_bit_data.data == NULL) { release_mem_region(base+offsetof(struct Hydra, CachePD), 4); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index dc7ea32b69a8..5123eb69a971 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -41,6 +41,7 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes + PCH 0x3b30 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, { 0, } }; @@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id case PCI_DEVICE_ID_INTEL_TOLAPAI_1: case PCI_DEVICE_ID_INTEL_ICH10_4: case PCI_DEVICE_ID_INTEL_ICH10_5: + case PCI_DEVICE_ID_INTEL_PCH_SMBUS: i801_features |= FEATURE_I2C_BLOCK_READ; /* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3: diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 5af9e6521e6c..05d72e981353 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -33,8 +33,8 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> -#include <asm/hardware.h> /* Pick up IXP2000-specific bits */ -#include <asm/arch/gpio.h> +#include <mach/hardware.h> /* Pick up IXP2000-specific bits */ +#include <mach/gpio.h> static inline int ixp2000_scl_pin(void *data) { diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 27443f073bc9..a9a45fcc8544 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = { .name = "MPC adapter", .id = I2C_HW_MPC107, .algo = &mpc_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .timeout = 1, }; diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c index d1a4cbcf2aa4..29015eb9ca46 100644 --- a/drivers/i2c/busses/i2c-nforce2-s4985.c +++ b/drivers/i2c/busses/i2c-nforce2-s4985.c @@ -150,6 +150,9 @@ static int __init nforce2_s4985_init(void) int i, error; union i2c_smbus_data ioconfig; + if (!nforce2_smbus) + return -ENODEV; + /* Configure the PCA9556 multiplexer */ ioconfig.byte = 0x00; /* All I/O to output mode */ error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03, @@ -161,8 +164,6 @@ static int __init nforce2_s4985_init(void) } /* Unregister physical bus */ - if (!nforce2_smbus) - return -ENODEV; error = i2c_del_adapter(nforce2_smbus); if (error) { dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n"); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index e7eb7bf9ddec..608038d64f81 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -589,11 +589,16 @@ omap_i2c_probe(struct platform_device *pdev) dev->dev = &pdev->dev; dev->irq = irq->start; - dev->base = (void __iomem *) IO_ADDRESS(mem->start); + dev->base = ioremap(mem->start, mem->end - mem->start + 1); + if (!dev->base) { + r = -ENOMEM; + goto err_free_mem; + } + platform_set_drvdata(pdev, dev); if ((r = omap_i2c_get_clocks(dev)) != 0) - goto err_free_mem; + goto err_iounmap; omap_i2c_unidle(dev); @@ -640,6 +645,8 @@ err_unuse_clocks: omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); omap_i2c_idle(dev); omap_i2c_put_clocks(dev); +err_iounmap: + iounmap(dev->base); err_free_mem: platform_set_drvdata(pdev, NULL); kfree(dev); @@ -661,6 +668,7 @@ omap_i2c_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); omap_i2c_put_clocks(dev); + iounmap(dev->base); kfree(dev); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(mem->start, (mem->end - mem->start) + 1); diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index c6faf9bdad18..b2b8380f6602 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -123,11 +123,6 @@ static struct i2c_adapter parport_adapter = { static int __devinit i2c_parport_probe(struct platform_device *pdev) { int err; - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) - return -EBUSY; /* Reset hardware to a sane state (SCL and SDA high) */ parport_setsda(NULL, 1); @@ -138,29 +133,19 @@ static int __devinit i2c_parport_probe(struct platform_device *pdev) parport_adapter.dev.parent = &pdev->dev; err = i2c_bit_add_bus(&parport_adapter); - if (err) { + if (err) dev_err(&pdev->dev, "Unable to register with I2C\n"); - goto exit_region; - } - return 0; - -exit_region: - release_region(res->start, res->end - res->start + 1); return err; } static int __devexit i2c_parport_remove(struct platform_device *pdev) { - struct resource *res; - i2c_del_adapter(&parport_adapter); /* Un-init if needed (power off...) */ if (adapter_parm[type].init.val) line_set(0, &adapter_parm[type].init); - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, res->end - res->start + 1); return 0; } @@ -175,12 +160,6 @@ static struct platform_driver i2c_parport_driver = { static int __init i2c_parport_device_add(u16 address) { - struct resource res = { - .start = address, - .end = address + 2, - .name = DRVNAME, - .flags = IORESOURCE_IO, - }; int err; pdev = platform_device_alloc(DRVNAME, -1); @@ -190,13 +169,6 @@ static int __init i2c_parport_device_add(u16 address) goto exit; } - err = platform_device_add_resources(pdev, &res, 1); - if (err) { - printk(KERN_ERR DRVNAME ": Device resource addition failed " - "(%d)\n", err); - goto exit_device_put; - } - err = platform_device_add(pdev); if (err) { printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", @@ -231,13 +203,16 @@ static int __init i2c_parport_init(void) base = DEFAULT_BASE; } + if (!request_region(base, 3, DRVNAME)) + return -EBUSY; + if (!adapter_parm[type].getscl.val) parport_algo_data.getscl = NULL; /* Sets global pdev as a side effect */ err = i2c_parport_device_add(base); if (err) - goto exit; + goto exit_release; err = platform_driver_register(&i2c_parport_driver); if (err) @@ -247,7 +222,8 @@ static int __init i2c_parport_init(void) exit_device: platform_device_unregister(pdev); -exit: +exit_release: + release_region(base, 3); return err; } @@ -255,6 +231,7 @@ static void __exit i2c_parport_exit(void) { platform_driver_unregister(&i2c_parport_driver); platform_device_unregister(pdev); + release_region(base, 3); } MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index a119784bae10..9eb76268ec78 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -36,8 +36,8 @@ #define DRIVER "i2c-pca-isa" #define IO_SIZE 4 -static unsigned long base = 0x330; -static int irq = 10; +static unsigned long base; +static int irq = -1; /* Data sheet recommends 59kHz for 100kHz operation due to variation * in the actual clock rate */ @@ -107,13 +107,26 @@ static struct i2c_adapter pca_isa_ops = { .timeout = 100, }; +static int __devinit pca_isa_match(struct device *dev, unsigned int id) +{ + int match = base != 0; + + if (match) { + if (irq <= -1) + dev_warn(dev, "Using polling mode (specify irq)\n"); + } else + dev_err(dev, "Please specify I/O base\n"); + + return match; +} + static int __devinit pca_isa_probe(struct device *dev, unsigned int id) { init_waitqueue_head(&pca_wait); dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq); -#ifdef CONFIG_PPC_MERGE +#ifdef CONFIG_PPC if (check_legacy_ioport(base)) { dev_err(dev, "I/O address %#08lx is not available\n", base); goto out; @@ -153,7 +166,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id) { i2c_del_adapter(&pca_isa_ops); - if (irq > 0) { + if (irq > -1) { disable_irq(irq); free_irq(irq, &pca_isa_ops); } @@ -163,6 +176,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id) } static struct isa_driver pca_isa_driver = { + .match = pca_isa_match, .probe = pca_isa_probe, .remove = __devexit_p(pca_isa_remove), .driver = { diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 1ca21084ffcf..ec15cff556b9 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -19,7 +19,7 @@ #include <linux/completion.h> #include <linux/platform_device.h> #include <linux/i2c-pnx.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/uaccess.h> diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 22f6d5c00d80..60ca91745e55 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -180,7 +180,7 @@ static const struct i2c_algorithm i2c_powermac_algorithm = { }; -static int i2c_powermac_remove(struct platform_device *dev) +static int __devexit i2c_powermac_remove(struct platform_device *dev) { struct i2c_adapter *adapter = platform_get_drvdata(dev); struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter); @@ -200,7 +200,7 @@ static int i2c_powermac_remove(struct platform_device *dev) } -static int __devexit i2c_powermac_probe(struct platform_device *dev) +static int __devinit i2c_powermac_probe(struct platform_device *dev) { struct pmac_i2c_bus *bus = dev->dev.platform_data; struct device_node *parent = NULL; @@ -259,6 +259,35 @@ static int __devexit i2c_powermac_probe(struct platform_device *dev) } printk(KERN_INFO "PowerMac i2c bus %s registered\n", name); + + if (!strncmp(basename, "uni-n", 5)) { + struct device_node *np; + const u32 *prop; + struct i2c_board_info info; + + /* Instantiate I2C motion sensor if present */ + np = of_find_node_by_name(NULL, "accelerometer"); + if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") && + (prop = of_get_property(np, "reg", NULL))) { + int i2c_bus; + const char *tmp_bus; + + /* look for bus either using "reg" or by path */ + tmp_bus = strstr(np->full_name, "/i2c-bus@"); + if (tmp_bus) + i2c_bus = *(tmp_bus + 9) - '0'; + else + i2c_bus = ((*prop) >> 8) & 0x0f; + + if (pmac_i2c_get_channel(bus) == i2c_bus) { + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = ((*prop) & 0xff) >> 1; + strlcpy(info.type, "ams", I2C_NAME_SIZE); + i2c_new_device(adapter, &info); + } + } + } + return rc; } diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index af9e6034d7fb..906f9b9d715d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -34,11 +34,48 @@ #include <linux/err.h> #include <linux/clk.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/arch/i2c.h> -#include <asm/arch/pxa-regs.h> +#include <mach/i2c.h> + +/* + * I2C registers and bit definitions + */ +#define IBMR (0x00) +#define IDBR (0x08) +#define ICR (0x10) +#define ISR (0x18) +#define ISAR (0x20) + +#define ICR_START (1 << 0) /* start bit */ +#define ICR_STOP (1 << 1) /* stop bit */ +#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +#define ICR_TB (1 << 3) /* transfer byte bit */ +#define ICR_MA (1 << 4) /* master abort */ +#define ICR_SCLE (1 << 5) /* master clock enable */ +#define ICR_IUE (1 << 6) /* unit enable */ +#define ICR_GCD (1 << 7) /* general call disable */ +#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ +#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ +#define ICR_BEIE (1 << 10) /* enable bus error ints */ +#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ +#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ +#define ICR_SADIE (1 << 13) /* slave address detected int enable */ +#define ICR_UR (1 << 14) /* unit reset */ +#define ICR_FM (1 << 15) /* fast mode */ + +#define ISR_RWM (1 << 0) /* read/write mode */ +#define ISR_ACKNAK (1 << 1) /* ack/nak status */ +#define ISR_UB (1 << 2) /* unit busy */ +#define ISR_IBB (1 << 3) /* bus busy */ +#define ISR_SSD (1 << 4) /* slave stop detected */ +#define ISR_ALD (1 << 5) /* arbitration loss detected */ +#define ISR_ITE (1 << 6) /* tx buffer empty */ +#define ISR_IRF (1 << 7) /* rx buffer full */ +#define ISR_GCAD (1 << 8) /* general call address detected */ +#define ISR_SAD (1 << 9) /* slave address detected */ +#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ struct pxa_i2c { spinlock_t lock; @@ -60,19 +97,21 @@ struct pxa_i2c { u32 icrlog[32]; void __iomem *reg_base; + unsigned int reg_shift; unsigned long iobase; unsigned long iosize; int irq; - int use_pio; + unsigned int use_pio :1; + unsigned int fast_mode :1; }; -#define _IBMR(i2c) ((i2c)->reg_base + 0) -#define _IDBR(i2c) ((i2c)->reg_base + 8) -#define _ICR(i2c) ((i2c)->reg_base + 0x10) -#define _ISR(i2c) ((i2c)->reg_base + 0x18) -#define _ISAR(i2c) ((i2c)->reg_base + 0x20) +#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift)) +#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift)) +#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift)) +#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift)) +#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift)) /* * I2C Slave mode address @@ -188,14 +227,14 @@ static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) static void i2c_pxa_abort(struct pxa_i2c *i2c) { - unsigned long timeout = jiffies + HZ/4; + int i = 250; if (i2c_pxa_is_slavemode(i2c)) { dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__); return; } - while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) { + while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) { unsigned long icr = readl(_ICR(i2c)); icr &= ~ICR_START; @@ -205,7 +244,8 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c) show_state(i2c); - msleep(1); + mdelay(1); + i --; } writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP), @@ -364,7 +404,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) writel(i2c->slave_addr, _ISAR(i2c)); /* set control register values */ - writel(I2C_ICR_INIT, _ICR(i2c)); + writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c)); #ifdef CONFIG_I2C_PXA_SLAVE dev_info(&i2c->adap.dev, "Enabling slave mode\n"); @@ -907,12 +947,6 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num struct pxa_i2c *i2c = adap->algo_data; int ret, i; - /* If the I2C controller is disabled we need to reset it (probably due - to a suspend/resume destroying state). We do this here as we can then - avoid worrying about resuming the controller before its users. */ - if (!(readl(_ICR(i2c)) & ICR_IUE)) - i2c_pxa_reset(i2c); - for (i = adap->retries; i >= 0; i--) { ret = i2c_pxa_do_xfer(i2c, msgs, num); if (ret != I2C_RETRY) @@ -993,6 +1027,7 @@ static int i2c_pxa_probe(struct platform_device *dev) ret = -EIO; goto eremap; } + i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1; i2c->iobase = res->start; i2c->iosize = res_len(res); @@ -1013,6 +1048,7 @@ static int i2c_pxa_probe(struct platform_device *dev) if (plat) { i2c->adap.class = plat->class; i2c->use_pio = plat->use_pio; + i2c->fast_mode = plat->fast_mode; } if (i2c->use_pio) { @@ -1082,9 +1118,33 @@ static int __exit i2c_pxa_remove(struct platform_device *dev) return 0; } +#ifdef CONFIG_PM +static int i2c_pxa_suspend_late(struct platform_device *dev, pm_message_t state) +{ + struct pxa_i2c *i2c = platform_get_drvdata(dev); + clk_disable(i2c->clk); + return 0; +} + +static int i2c_pxa_resume_early(struct platform_device *dev) +{ + struct pxa_i2c *i2c = platform_get_drvdata(dev); + + clk_enable(i2c->clk); + i2c_pxa_reset(i2c); + + return 0; +} +#else +#define i2c_pxa_suspend_late NULL +#define i2c_pxa_resume_early NULL +#endif + static struct platform_driver i2c_pxa_driver = { .probe = i2c_pxa_probe, .remove = __exit_p(i2c_pxa_remove), + .suspend_late = i2c_pxa_suspend_late, + .resume_early = i2c_pxa_resume_early, .driver = { .name = "pxa2xx-i2c", .owner = THIS_MODULE, diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 007390ad9810..c772e02c2803 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -33,12 +33,13 @@ #include <linux/err.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/cpufreq.h> -#include <asm/hardware.h> +#include <mach/hardware.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/arch/regs-gpio.h> +#include <mach/regs-gpio.h> #include <asm/plat-s3c/regs-iic.h> #include <asm/plat-s3c/iic.h> @@ -64,6 +65,7 @@ struct s3c24xx_i2c { unsigned int tx_setup; enum s3c24xx_i2c_state state; + unsigned long clkrate; void __iomem *regs; struct clk *clk; @@ -71,6 +73,10 @@ struct s3c24xx_i2c { struct resource *irq; struct resource *ioarea; struct i2c_adapter adap; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif }; /* default platform data to use if not supplied in the platform_device @@ -501,6 +507,9 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; + if (!readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN) + return -EIO; + ret = s3c24xx_i2c_set_master(i2c); if (ret != 0) { dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); @@ -636,27 +645,28 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted) return (diff >= -2 && diff <= 2); } -/* s3c24xx_i2c_getdivisor +/* s3c24xx_i2c_clockrate * * work out a divisor for the user requested frequency setting, * either by the requested frequency, or scanning the acceptable * range of frequencies until something is found */ -static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c, - struct s3c2410_platform_i2c *pdata, - unsigned long *iicon, - unsigned int *got) +static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) { + struct s3c2410_platform_i2c *pdata; unsigned long clkin = clk_get_rate(i2c->clk); - unsigned int divs, div1; + u32 iiccon; int freq; int start, end; + i2c->clkrate = clkin; + + pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent); clkin /= 1000; /* clkin now in KHz */ - dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", + dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq); if (pdata->bus_freq != 0) { @@ -688,11 +698,79 @@ static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c, found: *got = freq; - *iicon |= (divs-1); - *iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0; + + iiccon = readl(i2c->regs + S3C2410_IICCON); + iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512); + iiccon |= (divs-1); + + if (div1 == 512) + iiccon |= S3C2410_IICCON_TXDIV_512; + + writel(iiccon, i2c->regs + S3C2410_IICCON); + + return 0; +} + +#ifdef CONFIG_CPU_FREQ + +#define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition) + +static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct s3c24xx_i2c *i2c = freq_to_i2c(nb); + unsigned long flags; + unsigned int got; + int delta_f; + int ret; + + delta_f = clk_get_rate(i2c->clk) - i2c->clkrate; + + /* if we're post-change and the input clock has slowed down + * or at pre-change and the clock is about to speed up, then + * adjust our clock rate. <0 is slow, >0 speedup. + */ + + if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) || + (val == CPUFREQ_PRECHANGE && delta_f > 0)) { + spin_lock_irqsave(&i2c->lock, flags); + ret = s3c24xx_i2c_clockrate(i2c, &got); + spin_unlock_irqrestore(&i2c->lock, flags); + + if (ret < 0) + dev_err(i2c->dev, "cannot find frequency\n"); + else + dev_info(i2c->dev, "setting freq %d\n", got); + } + + return 0; +} + +static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c) +{ + i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition; + + return cpufreq_register_notifier(&i2c->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) +{ + cpufreq_unregister_notifier(&i2c->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c) +{ return 0; } +static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) +{ +} +#endif + /* s3c24xx_i2c_init * * initialise the controller, set the IO lines and frequency @@ -719,9 +797,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr); + writel(iicon, i2c->regs + S3C2410_IICCON); + /* we need to work out the divisors for the clock... */ - if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) { + if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) { + writel(0, i2c->regs + S3C2410_IICCON); dev_err(i2c->dev, "cannot meet bus frequency required\n"); return -EINVAL; } @@ -730,8 +811,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq); dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon); - - writel(iicon, i2c->regs + S3C2410_IICCON); /* check for s3c2440 i2c controller */ @@ -752,9 +831,12 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) static int s3c24xx_i2c_probe(struct platform_device *pdev) { struct s3c24xx_i2c *i2c = &s3c24xx_i2c; + struct s3c2410_platform_i2c *pdata; struct resource *res; int ret; + pdata = s3c24xx_i2c_get_platformdata(&pdev->dev); + /* find the clock and enable it */ i2c->dev = &pdev->dev; @@ -832,17 +914,34 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res, (unsigned long)res->start); - ret = i2c_add_adapter(&i2c->adap); + ret = s3c24xx_i2c_register_cpufreq(i2c); if (ret < 0) { - dev_err(&pdev->dev, "failed to add bus to i2c core\n"); + dev_err(&pdev->dev, "failed to register cpufreq notifier\n"); goto err_irq; } + /* Note, previous versions of the driver used i2c_add_adapter() + * to add the bus at any number. We now pass the bus number via + * the platform data, so if unset it will now default to always + * being bus 0. + */ + + i2c->adap.nr = pdata->bus_num; + + ret = i2c_add_numbered_adapter(&i2c->adap); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add bus to i2c core\n"); + goto err_cpufreq; + } + platform_set_drvdata(pdev, i2c); dev_info(&pdev->dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id); return 0; + err_cpufreq: + s3c24xx_i2c_deregister_cpufreq(i2c); + err_irq: free_irq(i2c->irq->start, i2c); @@ -870,6 +969,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); + s3c24xx_i2c_deregister_cpufreq(i2c); + i2c_del_adapter(&i2c->adap); free_irq(i2c->irq->start, i2c); diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 840e634fa31f..640cbb237328 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -31,13 +31,84 @@ #include <linux/clk.h> #include <linux/io.h> +/* Transmit operation: */ +/* */ +/* 0 byte transmit */ +/* BUS: S A8 ACK P */ +/* IRQ: DTE WAIT */ +/* ICIC: */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 */ +/* */ +/* 1 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK P */ +/* IRQ: DTE WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) */ +/* */ +/* 2 byte transmit */ +/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */ +/* IRQ: DTE WAIT WAIT WAIT */ +/* ICIC: -DTE */ +/* ICCR: 0x94 0x90 */ +/* ICDR: A8 D8(1) D8(2) */ +/* */ +/* 3 bytes or more, +---------+ gets repeated */ +/* */ +/* */ +/* Receive operation: */ +/* */ +/* 0 byte receive - not supported since slave may hold SDA low */ +/* */ +/* 1 byte receive [TX] | [RX] */ +/* BUS: S A8 ACK | D8(1) ACK P */ +/* IRQ: DTE WAIT | WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) */ +/* */ +/* 2 byte receive [TX]| [RX] */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */ +/* IRQ: DTE WAIT | WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) */ +/* */ +/* 3 byte receive [TX] | [RX] */ +/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */ +/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */ +/* ICIC: -DTE | +DTE */ +/* ICCR: 0x94 0x81 | 0xc0 */ +/* ICDR: A8 | D8(1) D8(2) D8(3) */ +/* */ +/* 4 bytes or more, this part is repeated +---------+ */ +/* */ +/* */ +/* Interrupt order and BUSY flag */ +/* ___ _ */ +/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */ +/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */ +/* */ +/* S D7 D6 D5 D4 D3 D2 D1 D0 P */ +/* ___ */ +/* WAIT IRQ ________________________________/ \___________ */ +/* TACK IRQ ____________________________________/ \_______ */ +/* DTE IRQ __________________________________________/ \_ */ +/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */ +/* _______________________________________________ */ +/* BUSY __/ \_ */ +/* */ + enum sh_mobile_i2c_op { OP_START = 0, - OP_TX_ONLY, + OP_TX_FIRST, + OP_TX, OP_TX_STOP, OP_TX_TO_RX, - OP_RX_ONLY, + OP_RX, OP_RX_STOP, + OP_RX_STOP_DATA, }; struct sh_mobile_i2c_data { @@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, spin_lock_irqsave(&pd->lock, flags); switch (op) { - case OP_START: + case OP_START: /* issue start and trigger DTE interrupt */ iowrite8(0x94, ICCR(pd)); break; - case OP_TX_ONLY: + case OP_TX_FIRST: /* disable DTE interrupt and write data */ + iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd)); iowrite8(data, ICDR(pd)); break; - case OP_TX_STOP: + case OP_TX: /* write data */ iowrite8(data, ICDR(pd)); - iowrite8(0x90, ICCR(pd)); - iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd)); break; - case OP_TX_TO_RX: + case OP_TX_STOP: /* write data and issue a stop afterwards */ iowrite8(data, ICDR(pd)); + iowrite8(0x90, ICCR(pd)); + break; + case OP_TX_TO_RX: /* select read mode */ iowrite8(0x81, ICCR(pd)); break; - case OP_RX_ONLY: + case OP_RX: /* just read data */ ret = ioread8(ICDR(pd)); break; - case OP_RX_STOP: + case OP_RX_STOP: /* enable DTE interrupt, issue stop */ + iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, + ICIC(pd)); + iowrite8(0xc0, ICCR(pd)); + break; + case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */ + iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, + ICIC(pd)); ret = ioread8(ICDR(pd)); iowrite8(0xc0, ICCR(pd)); break; @@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, return ret; } +static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd) +{ + if (pd->pos == -1) + return 1; + + return 0; +} + +static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd) +{ + if (pd->pos == (pd->msg->len - 1)) + return 1; + + return 0; +} + +static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd, + unsigned char *buf) +{ + switch (pd->pos) { + case -1: + *buf = (pd->msg->addr & 0x7f) << 1; + *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0; + break; + default: + *buf = pd->msg->buf[pd->pos]; + } +} + +static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + + if (pd->pos == pd->msg->len) + return 1; + + sh_mobile_i2c_get_data(pd, &data); + + if (sh_mobile_i2c_is_last_byte(pd)) + i2c_op(pd, OP_TX_STOP, data); + else if (sh_mobile_i2c_is_first_byte(pd)) + i2c_op(pd, OP_TX_FIRST, data); + else + i2c_op(pd, OP_TX, data); + + pd->pos++; + return 0; +} + +static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) +{ + unsigned char data; + int real_pos; + + do { + if (pd->pos <= -1) { + sh_mobile_i2c_get_data(pd, &data); + + if (sh_mobile_i2c_is_first_byte(pd)) + i2c_op(pd, OP_TX_FIRST, data); + else + i2c_op(pd, OP_TX, data); + break; + } + + if (pd->pos == 0) { + i2c_op(pd, OP_TX_TO_RX, 0); + break; + } + + real_pos = pd->pos - 2; + + if (pd->pos == pd->msg->len) { + if (real_pos < 0) { + i2c_op(pd, OP_RX_STOP, 0); + break; + } + data = i2c_op(pd, OP_RX_STOP_DATA, 0); + } else + data = i2c_op(pd, OP_RX, 0); + + pd->msg->buf[real_pos] = data; + } while (0); + + pd->pos++; + return pd->pos == (pd->msg->len + 2); +} + static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) { struct platform_device *dev = dev_id; struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev); - struct i2c_msg *msg = pd->msg; - unsigned char data, sr; - int wakeup = 0; + unsigned char sr; + int wakeup; sr = ioread8(ICSR(pd)); - pd->sr |= sr; + pd->sr |= sr; /* remember state */ dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr, - (msg->flags & I2C_M_RD) ? "read" : "write", - pd->pos, msg->len); + (pd->msg->flags & I2C_M_RD) ? "read" : "write", + pd->pos, pd->msg->len); if (sr & (ICSR_AL | ICSR_TACK)) { - iowrite8(0, ICIC(pd)); /* disable interrupts */ - wakeup = 1; - goto do_wakeup; - } + /* don't interrupt transaction - continue to issue stop */ + iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd)); + wakeup = 0; + } else if (pd->msg->flags & I2C_M_RD) + wakeup = sh_mobile_i2c_isr_rx(pd); + else + wakeup = sh_mobile_i2c_isr_tx(pd); - if (pd->pos == msg->len) { - i2c_op(pd, OP_RX_ONLY, 0); - wakeup = 1; - goto do_wakeup; - } + if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */ + iowrite8(sr & ~ICSR_WAIT, ICSR(pd)); - if (pd->pos == -1) { - data = (msg->addr & 0x7f) << 1; - data |= (msg->flags & I2C_M_RD) ? 1 : 0; - } else - data = msg->buf[pd->pos]; - - if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) { - if (msg->flags & I2C_M_RD) - i2c_op(pd, OP_TX_TO_RX, data); - else if (pd->pos == (msg->len - 1)) { - i2c_op(pd, OP_TX_STOP, data); - wakeup = 1; - } else - i2c_op(pd, OP_TX_ONLY, data); - } else { - if (pd->pos == (msg->len - 1)) - data = i2c_op(pd, OP_RX_STOP, 0); - else - data = i2c_op(pd, OP_RX_ONLY, 0); - - msg->buf[pd->pos] = data; - } - pd->pos++; - - do_wakeup: if (wakeup) { pd->sr |= SW_DONE; wake_up(&pd->wait); @@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) { + if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) { + dev_err(pd->dev, "Unsupported zero length i2c read\n"); + return -EIO; + } + /* Initialize channel registers */ iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd)); @@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) pd->pos = -1; pd->sr = 0; - /* Enable all interrupts except wait */ - iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, - ICIC(pd)); + /* Enable all interrupts to begin with */ + iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd)); return 0; } @@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, if (!k) dev_err(pd->dev, "Transfer request timed out\n"); - retry_count = 10; + retry_count = 1000; again: val = ioread8(ICSR(pd)); dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr); - if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) { - err = -EIO; - break; - } - /* the interrupt handler may wake us up before the * transfer is finished, so poll the hardware * until we're done. */ - - if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) && - (val & ICSR_SDAM))) { - msleep(1); + if (val & ICSR_BUSY) { + udelay(10); if (retry_count--) goto again; @@ -294,6 +433,12 @@ again: dev_err(pd->dev, "Polling timed out\n"); break; } + + /* handle missing acknowledge and arbitration lost */ + if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) { + err = -EIO; + break; + } } deactivate_ch(pd); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 862eb352a2d9..9f194d9efd91 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -36,6 +36,7 @@ VT8237S 0x3372 yes VT8251 0x3287 yes CX700 0x8324 yes + VX800/VX820 0x8353 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -82,6 +83,7 @@ static unsigned short SMBHSTCFG = 0xD2; #define VT596_BYTE 0x04 #define VT596_BYTE_DATA 0x08 #define VT596_WORD_DATA 0x0C +#define VT596_PROC_CALL 0x10 #define VT596_BLOCK_DATA 0x14 #define VT596_I2C_BLOCK_DATA 0x34 @@ -232,6 +234,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, } size = VT596_WORD_DATA; break; + case I2C_SMBUS_PROC_CALL: + outb_p(command, SMBHSTCMD); + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + size = VT596_PROC_CALL; + break; case I2C_SMBUS_I2C_BLOCK_DATA: if (!(vt596_features & FEATURE_I2CBLOCK)) goto exit_unsupported; @@ -262,6 +270,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, if (status) return status; + if (size == VT596_PROC_CALL) + read_write = I2C_SMBUS_READ; + if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) return 0; @@ -271,6 +282,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, data->byte = inb_p(SMBHSTDAT0); break; case VT596_WORD_DATA: + case VT596_PROC_CALL: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; case VT596_I2C_BLOCK_DATA: @@ -295,7 +307,7 @@ static u32 vt596_func(struct i2c_adapter *adapter) { u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA; + I2C_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA; if (vt596_features & FEATURE_I2CBLOCK) func |= I2C_FUNC_SMBUS_I2C_BLOCK; @@ -320,10 +332,6 @@ static int __devinit vt596_probe(struct pci_dev *pdev, unsigned char temp; int error = -ENODEV; - /* driver_data might come from user-space, so check it */ - if (id->driver_data & 1 || id->driver_data > 0xff) - return -EINVAL; - /* Determine the address of the SMBus areas */ if (force_addr) { vt596_smba = force_addr & 0xfff0; @@ -396,6 +404,7 @@ found: switch (pdev->device) { case PCI_DEVICE_ID_VIA_CX700: + case PCI_DEVICE_ID_VIA_VX800: case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: case PCI_DEVICE_ID_VIA_8237A: @@ -459,6 +468,8 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA3 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800), + .driver_data = SMBBA3 }, { 0, } }; @@ -468,7 +479,6 @@ static struct pci_driver vt596_driver = { .name = "vt596_smbus", .id_table = vt596_ids, .probe = vt596_probe, - .dynids.use_driver_data = 1, }; static int __init i2c_vt596_init(void) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 50e0a4653741..4c35702830ce 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,6 +1,8 @@ # # Miscellaneous I2C chip drivers configuration # +# *** DEPRECATED! Do not add new entries! See Makefile *** +# menu "Miscellaneous I2C Chip support" @@ -126,7 +128,7 @@ config ISP1301_OMAP config TPS65010 tristate "TPS6501x Power Management chips" - depends on HAVE_GPIO_LIB + depends on GPIOLIB default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK help If you say yes here you get support for the TPS6501x series of @@ -172,4 +174,15 @@ config MENELAUS and other features that are often used in portable devices like cell phones and PDAs. +config MCU_MPC8349EMITX + tristate "MPC8349E-mITX MCU driver" + depends on I2C && PPC_83xx + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Say Y here to enable soft power-off functionality on the Freescale + boards with the MPC8349E-mITX-compatible MCU chips. This driver will + also register MCU GPIOs with the generic GPIO API, so you'll able + to use MCU pins as GPIOs. + endmenu diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 39e3e69ed125..23d2a31b0a64 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,7 +1,8 @@ # # Makefile for miscellaneous I2C chip drivers. # -# Think twice before you add a new driver to this directory. +# Do not add new drivers to this directory! It is DEPRECATED. +# # Device drivers are better grouped according to the functionality they # implement rather than to the bus they are connected to. In particular: # * Hardware monitoring chip drivers go to drivers/hwmon @@ -21,6 +22,7 @@ obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o +obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c index e764c94f3e3d..d4775528abc6 100644 --- a/drivers/i2c/chips/at24.c +++ b/drivers/i2c/chips/at24.c @@ -188,7 +188,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, count = I2C_SMBUS_BLOCK_MAX; status = i2c_smbus_read_i2c_block_data(client, offset, count, buf); - dev_dbg(&client->dev, "smbus read %zd@%d --> %d\n", + dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n", count, offset, status); return (status < 0) ? -EIO : status; } @@ -214,7 +214,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, msg[1].len = count; status = i2c_transfer(client->adapter, msg, 2); - dev_dbg(&client->dev, "i2c read %zd@%d --> %d\n", + dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n", count, offset, status); if (status == 2) @@ -334,7 +334,7 @@ static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf, if (status == 1) status = count; } - dev_dbg(&client->dev, "write %zd@%d --> %zd (%ld)\n", + dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", count, offset, status, jiffies); if (status == count) @@ -460,7 +460,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) */ at24->bin.attr.name = "eeprom"; at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.attr.owner = THIS_MODULE; at24->bin.read = at24_bin_read; at24->bin.size = chip.byte_len; @@ -512,7 +511,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) i2c_set_clientdata(client, at24); - dev_info(&client->dev, "%Zd byte %s EEPROM %s\n", + dev_info(&client->dev, "%zu byte %s EEPROM %s\n", at24->bin.size, client->name, writable ? "(writable)" : "(read-only)"); dev_dbg(&client->dev, diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c index 23be4d42cb02..f3ee4a1abb77 100644 --- a/drivers/i2c/chips/ds1682.c +++ b/drivers/i2c/chips/ds1682.c @@ -190,7 +190,6 @@ static struct bin_attribute ds1682_eeprom_attr = { .attr = { .name = "eeprom", .mode = S_IRUGO | S_IWUSR, - .owner = THIS_MODULE, }, .size = DS1682_EEPROM_SIZE, .read = ds1682_eeprom_read, diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 03a33f1b9cd3..28902ebd5539 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -33,7 +33,7 @@ #include <linux/workqueue.h> #include <asm/irq.h> -#include <asm/arch/usb.h> +#include <mach/usb.h> #ifndef DEBUG @@ -49,10 +49,9 @@ MODULE_LICENSE("GPL"); struct isp1301 { struct otg_transceiver otg; - struct i2c_client client; + struct i2c_client *client; void (*i2c_release)(struct device *dev); - int irq; int irq_type; u32 last_otg_ctrl; @@ -94,7 +93,7 @@ struct isp1301 { /* board-specific PM hooks */ #include <asm/gpio.h> -#include <asm/arch/mux.h> +#include <mach/mux.h> #include <asm/mach-types.h> @@ -138,14 +137,6 @@ static inline void notresponding(struct isp1301 *isp) /*-------------------------------------------------------------------------*/ -/* only two addresses possible */ -#define ISP_BASE 0x2c -static unsigned short normal_i2c[] = { - ISP_BASE, ISP_BASE + 1, - I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD; - static struct i2c_driver isp1301_driver; /* smbus apis are used for portability */ @@ -153,25 +144,25 @@ static struct i2c_driver isp1301_driver; static inline u8 isp1301_get_u8(struct isp1301 *isp, u8 reg) { - return i2c_smbus_read_byte_data(&isp->client, reg + 0); + return i2c_smbus_read_byte_data(isp->client, reg + 0); } static inline int isp1301_get_u16(struct isp1301 *isp, u8 reg) { - return i2c_smbus_read_word_data(&isp->client, reg); + return i2c_smbus_read_word_data(isp->client, reg); } static inline int isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits) { - return i2c_smbus_write_byte_data(&isp->client, reg + 0, bits); + return i2c_smbus_write_byte_data(isp->client, reg + 0, bits); } static inline int isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) { - return i2c_smbus_write_byte_data(&isp->client, reg + 1, bits); + return i2c_smbus_write_byte_data(isp->client, reg + 1, bits); } /*-------------------------------------------------------------------------*/ @@ -349,10 +340,10 @@ isp1301_defer_work(struct isp1301 *isp, int work) int status; if (isp && !test_and_set_bit(work, &isp->todo)) { - (void) get_device(&isp->client.dev); + (void) get_device(&isp->client->dev); status = schedule_work(&isp->work); if (!status && !isp->working) - dev_vdbg(&isp->client.dev, + dev_vdbg(&isp->client->dev, "work item %d may be lost\n", work); } } @@ -1135,7 +1126,7 @@ isp1301_work(struct work_struct *work) /* transfer state from otg engine to isp1301 */ if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) { otg_update_isp(isp); - put_device(&isp->client.dev); + put_device(&isp->client->dev); } #endif /* transfer state from isp1301 to otg engine */ @@ -1143,7 +1134,7 @@ isp1301_work(struct work_struct *work) u8 stat = isp1301_clear_latch(isp); isp_update_otg(isp, stat); - put_device(&isp->client.dev); + put_device(&isp->client->dev); } if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) { @@ -1178,7 +1169,7 @@ isp1301_work(struct work_struct *work) } host_resume(isp); // mdelay(10); - put_device(&isp->client.dev); + put_device(&isp->client->dev); } if (test_and_clear_bit(WORK_TIMER, &isp->todo)) { @@ -1187,15 +1178,15 @@ isp1301_work(struct work_struct *work) if (!stop) mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); #endif - put_device(&isp->client.dev); + put_device(&isp->client->dev); } if (isp->todo) - dev_vdbg(&isp->client.dev, + dev_vdbg(&isp->client->dev, "work done, todo = 0x%lx\n", isp->todo); if (stop) { - dev_dbg(&isp->client.dev, "stop\n"); + dev_dbg(&isp->client->dev, "stop\n"); break; } } while (isp->todo); @@ -1219,7 +1210,7 @@ static void isp1301_release(struct device *dev) { struct isp1301 *isp; - isp = container_of(dev, struct isp1301, client.dev); + isp = dev_get_drvdata(dev); /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ if (isp->i2c_release) @@ -1229,15 +1220,15 @@ static void isp1301_release(struct device *dev) static struct isp1301 *the_transceiver; -static int isp1301_detach_client(struct i2c_client *i2c) +static int __exit isp1301_remove(struct i2c_client *i2c) { struct isp1301 *isp; - isp = container_of(i2c, struct isp1301, client); + isp = i2c_get_clientdata(i2c); isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); - free_irq(isp->irq, isp); + free_irq(i2c->irq, isp); #ifdef CONFIG_USB_OTG otg_unbind(isp); #endif @@ -1252,7 +1243,7 @@ static int isp1301_detach_client(struct i2c_client *i2c) put_device(&i2c->dev); the_transceiver = 0; - return i2c_detach_client(i2c); + return 0; } /*-------------------------------------------------------------------------*/ @@ -1285,7 +1276,7 @@ static int isp1301_otg_enable(struct isp1301 *isp) isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); - dev_info(&isp->client.dev, "ready for dual-role USB ...\n"); + dev_info(&isp->client->dev, "ready for dual-role USB ...\n"); return 0; } @@ -1310,7 +1301,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) #ifdef CONFIG_USB_OTG isp->otg.host = host; - dev_dbg(&isp->client.dev, "registered host\n"); + dev_dbg(&isp->client->dev, "registered host\n"); host_suspend(isp); if (isp->otg.gadget) return isp1301_otg_enable(isp); @@ -1325,7 +1316,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) if (machine_is_omap_h2()) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); - dev_info(&isp->client.dev, "A-Host sessions ok\n"); + dev_info(&isp->client->dev, "A-Host sessions ok\n"); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, INTR_ID_GND); isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, @@ -1343,7 +1334,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) return 0; #else - dev_dbg(&isp->client.dev, "host sessions not allowed\n"); + dev_dbg(&isp->client->dev, "host sessions not allowed\n"); return -EINVAL; #endif @@ -1370,7 +1361,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) #ifdef CONFIG_USB_OTG isp->otg.gadget = gadget; - dev_dbg(&isp->client.dev, "registered gadget\n"); + dev_dbg(&isp->client->dev, "registered gadget\n"); /* gadget driver may be suspended until vbus_connect () */ if (isp->otg.host) return isp1301_otg_enable(isp); @@ -1395,7 +1386,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) INTR_SESS_VLD); isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, INTR_VBUS_VLD); - dev_info(&isp->client.dev, "B-Peripheral sessions ok\n"); + dev_info(&isp->client->dev, "B-Peripheral sessions ok\n"); dump_regs(isp, __func__); /* If this has a Mini-AB connector, this mode is highly @@ -1408,7 +1399,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) return 0; #else - dev_dbg(&isp->client.dev, "peripheral sessions not allowed\n"); + dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n"); return -EINVAL; #endif } @@ -1508,12 +1499,10 @@ isp1301_start_hnp(struct otg_transceiver *dev) /*-------------------------------------------------------------------------*/ -/* no error returns, they'd just make bus scanning stop */ -static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) +static int __init isp1301_probe(struct i2c_client *i2c) { int status; struct isp1301 *isp; - struct i2c_client *i2c; if (the_transceiver) return 0; @@ -1527,37 +1516,19 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) isp->timer.function = isp1301_timer; isp->timer.data = (unsigned long) isp; - isp->irq = -1; - isp->client.addr = address; - i2c_set_clientdata(&isp->client, isp); - isp->client.adapter = bus; - isp->client.driver = &isp1301_driver; - strlcpy(isp->client.name, DRIVER_NAME, I2C_NAME_SIZE); - i2c = &isp->client; - - /* if this is a true probe, verify the chip ... */ - if (kind < 0) { - status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); - if (status != I2C_VENDOR_ID_PHILIPS) { - dev_dbg(&bus->dev, "addr %d not philips id: %d\n", - address, status); - goto fail1; - } - status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); - if (status != I2C_PRODUCT_ID_PHILIPS_1301) { - dev_dbg(&bus->dev, "%d not isp1301, %d\n", - address, status); - goto fail1; - } - } + i2c_set_clientdata(i2c, isp); + isp->client = i2c; - status = i2c_attach_client(i2c); - if (status < 0) { - dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n", - DRIVER_NAME, address, status); -fail1: - kfree(isp); - return 0; + /* verify the chip (shouldn't be necesary) */ + status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); + if (status != I2C_VENDOR_ID_PHILIPS) { + dev_dbg(&i2c->dev, "not philips id: %d\n", status); + goto fail; + } + status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); + if (status != I2C_PRODUCT_ID_PHILIPS_1301) { + dev_dbg(&i2c->dev, "not isp1301, %d\n", status); + goto fail; } isp->i2c_release = i2c->dev.release; i2c->dev.release = isp1301_release; @@ -1586,39 +1557,34 @@ fail1: status = otg_bind(isp); if (status < 0) { dev_dbg(&i2c->dev, "can't bind OTG\n"); - goto fail2; + goto fail; } #endif if (machine_is_omap_h2()) { /* full speed signaling by default */ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, - MC1_SPEED_REG); + MC1_SPEED); isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_SPD_SUSP_CTRL); /* IRQ wired at M14 */ omap_cfg_reg(M14_1510_GPIO2); - isp->irq = OMAP_GPIO_IRQ(2); if (gpio_request(2, "isp1301") == 0) gpio_direction_input(2); isp->irq_type = IRQF_TRIGGER_FALLING; } isp->irq_type |= IRQF_SAMPLE_RANDOM; - status = request_irq(isp->irq, isp1301_irq, + status = request_irq(i2c->irq, isp1301_irq, isp->irq_type, DRIVER_NAME, isp); if (status < 0) { dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", - isp->irq, status); -#ifdef CONFIG_USB_OTG -fail2: -#endif - i2c_detach_client(i2c); - goto fail1; + i2c->irq, status); + goto fail; } - isp->otg.dev = &isp->client.dev; + isp->otg.dev = &i2c->dev; isp->otg.label = DRIVER_NAME; isp->otg.set_host = isp1301_set_host, @@ -1649,22 +1615,25 @@ fail2: status); return 0; -} -static int isp1301_scan_bus(struct i2c_adapter *bus) -{ - if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA - | I2C_FUNC_SMBUS_READ_WORD_DATA)) - return -EINVAL; - return i2c_probe(bus, &addr_data, isp1301_probe); +fail: + kfree(isp); + return -ENODEV; } +static const struct i2c_device_id isp1301_id[] = { + { "isp1301_omap", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, isp1301_id); + static struct i2c_driver isp1301_driver = { .driver = { .name = "isp1301_omap", }, - .attach_adapter = isp1301_scan_bus, - .detach_client = isp1301_detach_client, + .probe = isp1301_probe, + .remove = __exit_p(isp1301_remove), + .id_table = isp1301_id, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/drivers/i2c/chips/mcu_mpc8349emitx.c new file mode 100644 index 000000000000..82a9bcb858b6 --- /dev/null +++ b/drivers/i2c/chips/mcu_mpc8349emitx.c @@ -0,0 +1,209 @@ +/* + * Power Management and GPIO expander driver for MPC8349E-mITX-compatible MCU + * + * Copyright (c) 2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <asm/prom.h> +#include <asm/machdep.h> + +/* + * I don't have specifications for the MCU firmware, I found this register + * and bits positions by the trial&error method. + */ +#define MCU_REG_CTRL 0x20 +#define MCU_CTRL_POFF 0x40 + +#define MCU_NUM_GPIO 2 + +struct mcu { + struct mutex lock; + struct device_node *np; + struct i2c_client *client; + struct of_gpio_chip of_gc; + u8 reg_ctrl; +}; + +static struct mcu *glob_mcu; + +static void mcu_power_off(void) +{ + struct mcu *mcu = glob_mcu; + + pr_info("Sending power-off request to the MCU...\n"); + mutex_lock(&mcu->lock); + i2c_smbus_write_byte_data(glob_mcu->client, MCU_REG_CTRL, + mcu->reg_ctrl | MCU_CTRL_POFF); + mutex_unlock(&mcu->lock); +} + +static void mcu_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_gpio_chip *of_gc = to_of_gpio_chip(gc); + struct mcu *mcu = container_of(of_gc, struct mcu, of_gc); + u8 bit = 1 << (4 + gpio); + + mutex_lock(&mcu->lock); + if (val) + mcu->reg_ctrl &= ~bit; + else + mcu->reg_ctrl |= bit; + + i2c_smbus_write_byte_data(mcu->client, MCU_REG_CTRL, mcu->reg_ctrl); + mutex_unlock(&mcu->lock); +} + +static int mcu_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + mcu_gpio_set(gc, gpio, val); + return 0; +} + +static int mcu_gpiochip_add(struct mcu *mcu) +{ + struct device_node *np; + struct of_gpio_chip *of_gc = &mcu->of_gc; + struct gpio_chip *gc = &of_gc->gc; + int ret; + + np = of_find_compatible_node(NULL, NULL, "fsl,mcu-mpc8349emitx"); + if (!np) + return -ENODEV; + + gc->owner = THIS_MODULE; + gc->label = np->full_name; + gc->can_sleep = 1; + gc->ngpio = MCU_NUM_GPIO; + gc->base = -1; + gc->set = mcu_gpio_set; + gc->direction_output = mcu_gpio_dir_out; + of_gc->gpio_cells = 2; + of_gc->xlate = of_gpio_simple_xlate; + + np->data = of_gc; + mcu->np = np; + + /* + * We don't want to lose the node, its ->data and ->full_name... + * So, if succeeded, we don't put the node here. + */ + ret = gpiochip_add(gc); + if (ret) + of_node_put(np); + return ret; +} + +static int mcu_gpiochip_remove(struct mcu *mcu) +{ + int ret; + + ret = gpiochip_remove(&mcu->of_gc.gc); + if (ret) + return ret; + of_node_put(mcu->np); + + return 0; +} + +static int __devinit mcu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct mcu *mcu; + int ret; + + mcu = kzalloc(sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mutex_init(&mcu->lock); + mcu->client = client; + i2c_set_clientdata(client, mcu); + + ret = i2c_smbus_read_byte_data(mcu->client, MCU_REG_CTRL); + if (ret < 0) + goto err; + mcu->reg_ctrl = ret; + + ret = mcu_gpiochip_add(mcu); + if (ret) + goto err; + + /* XXX: this is potentially racy, but there is no lock for ppc_md */ + if (!ppc_md.power_off) { + glob_mcu = mcu; + ppc_md.power_off = mcu_power_off; + dev_info(&client->dev, "will provide power-off service\n"); + } + + return 0; +err: + kfree(mcu); + return ret; +} + +static int __devexit mcu_remove(struct i2c_client *client) +{ + struct mcu *mcu = i2c_get_clientdata(client); + int ret; + + if (glob_mcu == mcu) { + ppc_md.power_off = NULL; + glob_mcu = NULL; + } + + ret = mcu_gpiochip_remove(mcu); + if (ret) + return ret; + i2c_set_clientdata(client, NULL); + kfree(mcu); + return 0; +} + +static const struct i2c_device_id mcu_ids[] = { + { "mcu-mpc8349emitx", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, mcu_ids); + +static struct i2c_driver mcu_driver = { + .driver = { + .name = "mcu-mpc8349emitx", + .owner = THIS_MODULE, + }, + .probe = mcu_probe, + .remove = __devexit_p(mcu_remove), + .id_table = mcu_ids, +}; + +static int __init mcu_init(void) +{ + return i2c_add_driver(&mcu_driver); +} +module_init(mcu_init); + +static void __exit mcu_exit(void) +{ + i2c_del_driver(&mcu_driver); +} +module_exit(mcu_exit); + +MODULE_DESCRIPTION("Power Management and GPIO expander driver for " + "MPC8349E-mITX-compatible MCU"); +MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c index b36db1797c11..4b364bae6b3e 100644 --- a/drivers/i2c/chips/menelaus.c +++ b/drivers/i2c/chips/menelaus.c @@ -41,11 +41,10 @@ #include <linux/rtc.h> #include <linux/bcd.h> -#include <asm/mach-types.h> #include <asm/mach/irq.h> -#include <asm/arch/gpio.h> -#include <asm/arch/menelaus.h> +#include <mach/gpio.h> +#include <mach/menelaus.h> #define DRIVER_NAME "menelaus" @@ -833,52 +832,52 @@ static irqreturn_t menelaus_irq(int irq, void *_menelaus) static void menelaus_to_time(char *regs, struct rtc_time *t) { - t->tm_sec = BCD2BIN(regs[0]); - t->tm_min = BCD2BIN(regs[1]); + t->tm_sec = bcd2bin(regs[0]); + t->tm_min = bcd2bin(regs[1]); if (the_menelaus->rtc_control & RTC_CTRL_MODE12) { - t->tm_hour = BCD2BIN(regs[2] & 0x1f) - 1; + t->tm_hour = bcd2bin(regs[2] & 0x1f) - 1; if (regs[2] & RTC_HR_PM) t->tm_hour += 12; } else - t->tm_hour = BCD2BIN(regs[2] & 0x3f); - t->tm_mday = BCD2BIN(regs[3]); - t->tm_mon = BCD2BIN(regs[4]) - 1; - t->tm_year = BCD2BIN(regs[5]) + 100; + t->tm_hour = bcd2bin(regs[2] & 0x3f); + t->tm_mday = bcd2bin(regs[3]); + t->tm_mon = bcd2bin(regs[4]) - 1; + t->tm_year = bcd2bin(regs[5]) + 100; } static int time_to_menelaus(struct rtc_time *t, int regnum) { int hour, status; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_sec)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_sec)); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_min)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_min)); if (status < 0) goto fail; if (the_menelaus->rtc_control & RTC_CTRL_MODE12) { hour = t->tm_hour + 1; if (hour > 12) - hour = RTC_HR_PM | BIN2BCD(hour - 12); + hour = RTC_HR_PM | bin2bcd(hour - 12); else - hour = BIN2BCD(hour); + hour = bin2bcd(hour); } else - hour = BIN2BCD(t->tm_hour); + hour = bin2bcd(t->tm_hour); status = menelaus_write_reg(regnum++, hour); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mday)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mday)); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_mon + 1)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_mon + 1)); if (status < 0) goto fail; - status = menelaus_write_reg(regnum++, BIN2BCD(t->tm_year - 100)); + status = menelaus_write_reg(regnum++, bin2bcd(t->tm_year - 100)); if (status < 0) goto fail; @@ -915,7 +914,7 @@ static int menelaus_read_time(struct device *dev, struct rtc_time *t) } menelaus_to_time(regs, t); - t->tm_wday = BCD2BIN(regs[6]); + t->tm_wday = bcd2bin(regs[6]); return 0; } @@ -928,7 +927,7 @@ static int menelaus_set_time(struct device *dev, struct rtc_time *t) status = time_to_menelaus(t, MENELAUS_RTC_SEC); if (status < 0) return status; - status = menelaus_write_reg(MENELAUS_RTC_WKDAY, BIN2BCD(t->tm_wday)); + status = menelaus_write_reg(MENELAUS_RTC_WKDAY, bin2bcd(t->tm_wday)); if (status < 0) { dev_err(&the_menelaus->client->dev, "rtc write reg %02x " "err %d\n", MENELAUS_RTC_WKDAY, status); diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index 85949685191b..acf8b9d5f575 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -456,14 +456,17 @@ static irqreturn_t tps65010_irq(int irq, void *_tps) /* offsets 0..3 == GPIO1..GPIO4 * offsets 4..5 == LED1/nPG, LED2 (we set one of the non-BLINK modes) + * offset 6 == vibrator motor driver */ static void tps65010_gpio_set(struct gpio_chip *chip, unsigned offset, int value) { if (offset < 4) tps65010_set_gpio_out_value(offset + 1, value); - else + else if (offset < 6) tps65010_set_led(offset - 3, value ? ON : OFF); + else + tps65010_set_vib(value); } static int @@ -477,8 +480,10 @@ tps65010_output(struct gpio_chip *chip, unsigned offset, int value) if (!(tps->outmask & (1 << offset))) return -EINVAL; tps65010_set_gpio_out_value(offset + 1, value); - } else + } else if (offset < 6) tps65010_set_led(offset - 3, value ? ON : OFF); + else + tps65010_set_vib(value); return 0; } @@ -636,6 +641,8 @@ static int tps65010_probe(struct i2c_client *client, tps->outmask = board->outmask; tps->chip.label = client->name; + tps->chip.dev = &client->dev; + tps->chip.owner = THIS_MODULE; tps->chip.set = tps65010_gpio_set; tps->chip.direction_output = tps65010_output; @@ -644,7 +651,7 @@ static int tps65010_probe(struct i2c_client *client, tps->chip.get = tps65010_gpio_get; tps->chip.base = board->base; - tps->chip.ngpio = 6; + tps->chip.ngpio = 7; tps->chip.can_sleep = 1; status = gpiochip_add(&tps->chip); @@ -673,6 +680,7 @@ static const struct i2c_device_id tps65010_id[] = { { "tps65011", TPS65011 }, { "tps65012", TPS65012 }, { "tps65013", TPS65013 }, + { "tps65014", TPS65011 }, /* tps65011 charging at 6.5V max */ { } }; MODULE_DEVICE_TABLE(i2c, tps65010_id); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 7608df83d6d1..5a485c22660a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -108,6 +108,9 @@ static int i2c_device_probe(struct device *dev) if (!driver->probe || !driver->id_table) return -ENODEV; client->driver = driver; + if (!device_can_wakeup(&client->dev)) + device_init_wakeup(&client->dev, + client->flags & I2C_CLIENT_WAKE); dev_dbg(dev, "probe\n"); status = driver->probe(client, i2c_match_id(driver->id_table, client)); @@ -262,9 +265,11 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->adapter = adap; client->dev.platform_data = info->platform_data; - device_init_wakeup(&client->dev, info->flags & I2C_CLIENT_WAKE); - client->flags = info->flags & ~I2C_CLIENT_WAKE; + if (info->archdata) + client->dev.archdata = *info->archdata; + + client->flags = info->flags; client->addr = info->addr; client->irq = info->irq; @@ -435,6 +440,10 @@ static int i2c_register_adapter(struct i2c_adapter *adap) { int res = 0, dummy; + /* Can't register until after driver model init */ + if (unlikely(WARN_ON(!i2c_bus_type.p))) + return -EAGAIN; + mutex_init(&adap->bus_lock); mutex_init(&adap->clist_lock); INIT_LIST_HEAD(&adap->clients); @@ -694,6 +703,10 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) { int res; + /* Can't register until after driver model init */ + if (unlikely(WARN_ON(!i2c_bus_type.p))) + return -EAGAIN; + /* new style driver methods can't mix with legacy ones */ if (is_newstyle_driver(driver)) { if (driver->attach_adapter || driver->detach_adapter @@ -722,7 +735,8 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) INIT_LIST_HEAD(&driver->clients); /* Walk the adapters that are already present */ - class_for_each_device(&i2c_adapter_class, driver, __attach_adapter); + class_for_each_device(&i2c_adapter_class, NULL, driver, + __attach_adapter); mutex_unlock(&core_lock); return 0; @@ -782,7 +796,8 @@ void i2c_del_driver(struct i2c_driver *driver) { mutex_lock(&core_lock); - class_for_each_device(&i2c_adapter_class, driver, __detach_adapter); + class_for_each_device(&i2c_adapter_class, NULL, driver, + __detach_adapter); driver_unregister(&driver->driver); pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name); @@ -811,7 +826,12 @@ static int i2c_check_addr(struct i2c_adapter *adapter, int addr) int i2c_attach_client(struct i2c_client *client) { struct i2c_adapter *adapter = client->adapter; - int res = 0; + int res; + + /* Check for address business */ + res = i2c_check_addr(adapter, client->addr); + if (res) + return res; client->dev.parent = &client->adapter->dev; client->dev.bus = &i2c_bus_type; @@ -969,7 +989,10 @@ static void __exit i2c_exit(void) bus_unregister(&i2c_bus_type); } -subsys_initcall(i2c_init); +/* We must initialize early, because some subsystems register i2c drivers + * in subsys_initcall() code, but are linked (and initialized) before i2c. + */ +postcore_initcall(i2c_init); module_exit(i2c_exit); /* ---------------------------------------------------- @@ -1181,8 +1204,8 @@ int i2c_probe(struct i2c_adapter *adapter, && address_data->normal_i2c[0] == I2C_CLIENT_END) return 0; - dev_warn(&adapter->dev, "SMBus Quick command not supported, " - "can't probe for chips\n"); + dev_dbg(&adapter->dev, "SMBus Quick command not supported, " + "can't probe for chips\n"); return -EOPNOTSUPP; } @@ -1343,6 +1366,10 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver) } } + /* Stop here if the classes do not match */ + if (!(adapter->class & driver->class)) + goto exit_free; + /* Stop here if we can't use SMBUS_QUICK */ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { if (address_data->probe[0] == I2C_CLIENT_END @@ -1355,10 +1382,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver) goto exit_free; } - /* Stop here if the classes do not match */ - if (!(adapter->class & driver->class)) - goto exit_free; - /* Probe entries are done second, and are not affected by ignore entries either */ for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) { @@ -1449,9 +1472,11 @@ i2c_new_probed_device(struct i2c_adapter *adap, if ((addr_list[i] & ~0x07) == 0x30 || (addr_list[i] & ~0x0f) == 0x50 || !i2c_check_functionality(adap, I2C_FUNC_SMBUS_QUICK)) { + union i2c_smbus_data data; + if (i2c_smbus_xfer(adap, addr_list[i], 0, I2C_SMBUS_READ, 0, - I2C_SMBUS_BYTE, NULL) >= 0) + I2C_SMBUS_BYTE, &data) >= 0) break; } else { if (i2c_smbus_xfer(adap, addr_list[i], 0, @@ -1666,6 +1691,28 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value) EXPORT_SYMBOL(i2c_smbus_write_word_data); /** + * i2c_smbus_process_call - SMBus "process call" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "process call" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ +s32 i2c_smbus_process_call(struct i2c_client *client, u8 command, u16 value) +{ + union i2c_smbus_data data; + int status; + data.word = value; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_WRITE, command, + I2C_SMBUS_PROC_CALL, &data); + return (status < 0) ? status : data.word; +} +EXPORT_SYMBOL(i2c_smbus_process_call); + +/** * i2c_smbus_read_block_data - SMBus "block read" protocol * @client: Handle to slave device * @command: Byte interpreted by slave diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 86727fa8858f..c171988a9f51 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count, if (tmp==NULL) return -ENOMEM; - pr_debug("i2c-dev: i2c-%d reading %zd bytes.\n", + pr_debug("i2c-dev: i2c-%d reading %zu bytes.\n", iminor(file->f_path.dentry->d_inode), count); ret = i2c_master_recv(client,tmp,count); @@ -175,7 +175,7 @@ static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t c return -EFAULT; } - pr_debug("i2c-dev: i2c-%d writing %zd bytes.\n", + pr_debug("i2c-dev: i2c-%d writing %zu bytes.\n", iminor(file->f_path.dentry->d_inode), count); ret = i2c_master_send(client,tmp,count); @@ -522,7 +522,7 @@ static int i2cdev_attach_adapter(struct i2c_adapter *adap) /* register this i2c device with the driver core */ i2c_dev->dev = device_create(i2c_dev_class, &adap->dev, - MKDEV(I2C_MAJOR, adap->nr), + MKDEV(I2C_MAJOR, adap->nr), NULL, "i2c-%d", adap->nr); if (IS_ERR(i2c_dev->dev)) { res = PTR_ERR(i2c_dev->dev); @@ -583,8 +583,10 @@ static int __init i2c_dev_init(void) goto out; i2c_dev_class = class_create(THIS_MODULE, "i2c-dev"); - if (IS_ERR(i2c_dev_class)) + if (IS_ERR(i2c_dev_class)) { + res = PTR_ERR(i2c_dev_class); goto out_unreg_chrdev; + } res = i2c_add_driver(&i2cdev_driver); if (res) |