diff options
Diffstat (limited to 'drivers/i2c')
46 files changed, 61 insertions, 25944 deletions
diff --git a/drivers/i2c/algos/i2c-algo-ite.c b/drivers/i2c/algos/i2c-algo-ite.c index 68e9e6832ca0..e6cae39f47aa 100644 --- a/drivers/i2c/algos/i2c-algo-ite.c +++ b/drivers/i2c/algos/i2c-algo-ite.c @@ -208,7 +208,7 @@ static int test_bus(struct i2c_algo_iic_data *adap, char *name) { goto bailout; } sdalo(adap); - printk("test_bus:1 scl: %d sda: %d \n",getscl(adap), + printk("test_bus:1 scl: %d sda: %d\n", getscl(adap), getsda(adap)); if ( 0 != getsda(adap) ) { printk("test_bus: %s SDA stuck high!\n",name); @@ -221,7 +221,7 @@ static int test_bus(struct i2c_algo_iic_data *adap, char *name) { goto bailout; } sdahi(adap); - printk("test_bus:2 scl: %d sda: %d \n",getscl(adap), + printk("test_bus:2 scl: %d sda: %d\n", getscl(adap), getsda(adap)); if ( 0 == getsda(adap) ) { printk("test_bus: %s SDA stuck low!\n",name); @@ -234,7 +234,7 @@ static int test_bus(struct i2c_algo_iic_data *adap, char *name) { goto bailout; } scllo(adap); - printk("test_bus:3 scl: %d sda: %d \n",getscl(adap), + printk("test_bus:3 scl: %d sda: %d\n", getscl(adap), getsda(adap)); if ( 0 != getscl(adap) ) { @@ -247,7 +247,7 @@ static int test_bus(struct i2c_algo_iic_data *adap, char *name) { goto bailout; } sclhi(adap); - printk("test_bus:4 scl: %d sda: %d \n",getscl(adap), + printk("test_bus:4 scl: %d sda: %d\n", getscl(adap), getsda(adap)); if ( 0 == getscl(adap) ) { printk("test_bus: %s SCL stuck low!\n",name); diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 45e6efb1dcd1..0ab7e37f5b00 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -194,7 +194,7 @@ static int i801_transaction(void) /* Make sure the SMBus host is ready to start transmitting */ /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting... \n", + dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { @@ -315,7 +315,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, } if (temp & errmask) { dev_dbg(&I801_dev->dev, "SMBus busy (%02x). " - "Resetting... \n", temp); + "Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) { dev_err(&I801_dev->dev, diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index 363e545fc01f..94ae808314f7 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -698,7 +698,7 @@ dispose_iface(struct device *dev) } static int -create_iface_macio(struct macio_dev* dev, const struct of_match *match) +create_iface_macio(struct macio_dev* dev, const struct of_device_id *match) { return create_iface(dev->ofdev.node, &dev->ofdev.dev); } @@ -710,7 +710,7 @@ dispose_iface_macio(struct macio_dev* dev) } static int -create_iface_of_platform(struct of_device* dev, const struct of_match *match) +create_iface_of_platform(struct of_device* dev, const struct of_device_id *match) { return create_iface(dev->node, &dev->dev); } @@ -721,10 +721,9 @@ dispose_iface_of_platform(struct of_device* dev) return dispose_iface(&dev->dev); } -static struct of_match i2c_keywest_match[] = +static struct of_device_id i2c_keywest_match[] = { { - .name = OF_ANY_MATCH, .type = "i2c", .compatible = "keywest" }, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 1f80ba9da6f1..6d34ee381ce1 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -243,7 +243,7 @@ static int piix4_transaction(void) /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). " - "Resetting... \n", temp); + "Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 2b5911cfb7b5..bbd5e4e52f09 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -228,7 +228,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) /* Make sure the SMBus host is ready to start transmitting */ temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); if (temp != 0x00) { - dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting... \n", temp); + dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting...\n", temp); sis5595_write(SMB_STS_LO, temp & 0xff); sis5595_write(SMB_STS_HI, temp >> 8); if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) { diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index a0982da09803..43f70dbfc03f 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,409 +1,12 @@ # -# I2C Sensor and "other" chip configuration +# Miscellaneous I2C chip drivers configuration # -menu "Hardware Sensors Chip support" - depends on I2C - config I2C_SENSOR tristate default n -config SENSORS_ADM1021 - tristate "Analog Devices ADM1021 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1021 - and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, - and the XEON processor built-in sensor. - - This driver can also be built as a module. If so, the module - will be called adm1021. - -config SENSORS_ADM1025 - tristate "Analog Devices ADM1025 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1025 - and Philips NE1619 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm1025. - -config SENSORS_ADM1026 - tristate "Analog Devices ADM1026 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1026 - sensor chip. - - This driver can also be built as a module. If so, the module - will be called adm1026. - -config SENSORS_ADM1031 - tristate "Analog Devices ADM1031 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM1031 - and ADM1030 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm1031. - -config SENSORS_ADM9240 - tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Analog Devices ADM9240, - Dallas DS1780, National Semiconductor LM81 sensor chips. - - This driver can also be built as a module. If so, the module - will be called adm9240. - -config SENSORS_ASB100 - tristate "Asus ASB100 Bach" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the ASB100 Bach sensor - chip found on some Asus mainboards. - - This driver can also be built as a module. If so, the module - will be called asb100. - -config SENSORS_ATXP1 - tristate "Attansic ATXP1 VID controller" - depends on I2C && EXPERIMENTAL - help - If you say yes here you get support for the Attansic ATXP1 VID - controller. - - If your board have such a chip, you are able to control your CPU - core and other voltages. - - This driver can also be built as a module. If so, the module - will be called atxp1. - -config SENSORS_DS1621 - tristate "Dallas Semiconductor DS1621 and DS1625" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Dallas Semiconductor - DS1621 and DS1625 sensor chips. - - This driver can also be built as a module. If so, the module - will be called ds1621. - -config SENSORS_FSCHER - tristate "FSC Hermes" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Fujitsu Siemens - Computers Hermes sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscher. - -config SENSORS_FSCPOS - tristate "FSC Poseidon" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Fujitsu Siemens - Computers Poseidon sensor chips. - - This driver can also be built as a module. If so, the module - will be called fscpos. - -config SENSORS_GL518SM - tristate "Genesys Logic GL518SM" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for Genesys Logic GL518SM - sensor chips. - - This driver can also be built as a module. If so, the module - will be called gl518sm. - -config SENSORS_GL520SM - tristate "Genesys Logic GL520SM" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for Genesys Logic GL520SM - sensor chips. - - This driver can also be built as a module. If so, the module - will be called gl520sm. - -config SENSORS_IT87 - tristate "ITE IT87xx and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for ITE IT87xx sensor chips - and clones: SiS960. - - This driver can also be built as a module. If so, the module - will be called it87. - -config SENSORS_LM63 - tristate "National Semiconductor LM63" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the National Semiconductor - LM63 remote diode digital temperature sensor with integrated fan - control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro) - motherboard, among others. - - This driver can also be built as a module. If so, the module - will be called lm63. - -config SENSORS_LM75 - tristate "National Semiconductor LM75 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. - - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. - - This driver can also be built as a module. If so, the module - will be called lm75. - -config SENSORS_LM77 - tristate "National Semiconductor LM77" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM77 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm77. - -config SENSORS_LM78 - tristate "National Semiconductor LM78 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM78, - LM78-J and LM79. - - This driver can also be built as a module. If so, the module - will be called lm78. - -config SENSORS_LM80 - tristate "National Semiconductor LM80" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor - LM80 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm80. - -config SENSORS_LM83 - tristate "National Semiconductor LM83" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor - LM83 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm83. - -config SENSORS_LM85 - tristate "National Semiconductor LM85 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM85 - sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027. - - This driver can also be built as a module. If so, the module - will be called lm85. - -config SENSORS_LM87 - tristate "National Semiconductor LM87" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM87 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm87. - -config SENSORS_LM90 - tristate "National Semiconductor LM90 and compatibles" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and - MAX6658 sensor chips. - - The Analog Devices ADT7461 sensor chip is also supported, but only - if found in ADM1032 compatibility mode. - - This driver can also be built as a module. If so, the module - will be called lm90. - -config SENSORS_LM92 - tristate "National Semiconductor LM92 and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for National Semiconductor LM92 - and Maxim MAX6635 sensor chips. - - This driver can also be built as a module. If so, the module - will be called lm92. - -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for MAX1619 sensor chip. - - This driver can also be built as a module. If so, the module - will be called max1619. - -config SENSORS_PC87360 - tristate "National Semiconductor PC87360 family" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC8736x Super-I/O chips. - The PC87360, PC87363 and PC87364 only have fan monitoring and - control. The PC87365 and PC87366 additionally have voltage and - temperature monitoring. - - This driver can also be built as a module. If so, the module - will be called pc87360. - -config SENSORS_SMSC47B397 - tristate "SMSC LPC47B397-NC" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the SMSC LPC47B397-NC - sensor chip. - - This driver can also be built as a module. If so, the module - will be called smsc47b397. - -config SENSORS_SIS5595 - tristate "Silicon Integrated Systems Corp. SiS5595" - depends on I2C && PCI && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated sensors in - SiS5595 South Bridges. - - This driver can also be built as a module. If so, the module - will be called sis5595. - -config SENSORS_SMSC47M1 - tristate "SMSC LPC47M10x and compatibles" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated fan - monitoring and control capabilities of the SMSC LPC47B27x, - LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips. - - This driver can also be built as a module. If so, the module - will be called smsc47m1. - -config SENSORS_VIA686A - tristate "VIA686A" - depends on I2C && PCI - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the integrated sensors in - Via 686A/B South Bridges. - - This driver can also be built as a module. If so, the module - will be called via686a. - -config SENSORS_W83781D - tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" - depends on I2C - select I2C_SENSOR - help - If you say yes here you get support for the Winbond W8378x series - of sensor chips: the W83781D, W83782D, W83783S and W83627HF, - and the similar Asus AS99127F. - - This driver can also be built as a module. If so, the module - will be called w83781d. - -config SENSORS_W83L785TS - tristate "Winbond W83L785TS-S" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - help - If you say yes here you get support for the Winbond W83L785TS-S - sensor chip, which is used on the Asus A7N8X, among other - motherboards. - - This driver can also be built as a module. If so, the module - will be called w83l785ts. - -config SENSORS_W83627HF - tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get support for the Winbond W836X7 series - of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF - - This driver can also be built as a module. If so, the module - will be called w83627hf. - -config SENSORS_W83627EHF - tristate "Winbond W83627EHF" - depends on I2C && EXPERIMENTAL - select I2C_SENSOR - select I2C_ISA - help - If you say yes here you get preliminary support for the hardware - monitoring functionality of the Winbond W83627EHF Super-I/O chip. - Only fan and temperature inputs are supported at the moment, while - the chip does much more than that. - - This driver can also be built as a module. If so, the module - will be called w83627ehf. - -endmenu - -menu "Other I2C Chip support" +menu "Miscellaneous I2C Chip support" depends on I2C config SENSORS_DS1337 @@ -509,7 +112,6 @@ config TPS65010 This driver can also be built as a module. If so, the module will be called tps65010. - config SENSORS_M41T00 tristate "ST M41T00 RTC chip" depends on I2C && PPC32 @@ -520,13 +122,16 @@ config SENSORS_M41T00 will be called m41t00. config SENSORS_MAX6875 - tristate "MAXIM MAX6875 Power supply supervisor" + tristate "Maxim MAX6875 Power supply supervisor" depends on I2C && EXPERIMENTAL help - If you say yes here you get support for the MAX6875 - EEPROM-Programmable, Hex/Quad, Power-Suppy Sequencers/Supervisors. + If you say yes here you get support for the Maxim MAX6875 + EEPROM-programmable, quad power-supply sequencer/supervisor. + + This provides an interface to program the EEPROM and reset the chip. - This provides a interface to program the EEPROM and reset the chip. + This driver also supports the Maxim MAX6874 hex power-supply + sequencer/supervisor if found at a compatible address. This driver can also be built as a module. If so, the module will be called max6875. diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index b5e6d2f84f97..a876dd42b860 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,52 +1,16 @@ # -# Makefile for sensor and "other" I2C chip drivers. +# Makefile for miscellaneous I2C chip drivers. # -# asb100, then w83781d go first, as they can override other drivers' addresses. -obj-$(CONFIG_SENSORS_ASB100) += asb100.o -obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o -obj-$(CONFIG_SENSORS_W83781D) += w83781d.o - -obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o -obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o -obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o -obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o -obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o -obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_DS1337) += ds1337.o obj-$(CONFIG_SENSORS_DS1374) += ds1374.o -obj-$(CONFIG_SENSORS_DS1621) += ds1621.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o -obj-$(CONFIG_SENSORS_FSCHER) += fscher.o -obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o -obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o -obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o -obj-$(CONFIG_SENSORS_IT87) += it87.o -obj-$(CONFIG_SENSORS_LM63) += lm63.o -obj-$(CONFIG_SENSORS_LM75) += lm75.o -obj-$(CONFIG_SENSORS_LM77) += lm77.o -obj-$(CONFIG_SENSORS_LM78) += lm78.o -obj-$(CONFIG_SENSORS_LM80) += lm80.o -obj-$(CONFIG_SENSORS_LM83) += lm83.o -obj-$(CONFIG_SENSORS_LM85) += lm85.o -obj-$(CONFIG_SENSORS_LM87) += lm87.o -obj-$(CONFIG_SENSORS_LM90) += lm90.o -obj-$(CONFIG_SENSORS_LM92) += lm92.o -obj-$(CONFIG_SENSORS_MAX1619) += max1619.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_M41T00) += m41t00.o -obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o -obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o -obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o -obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o -obj-$(CONFIG_SENSORS_VIA686A) += via686a.o -obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o -obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o diff --git a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c deleted file mode 100644 index d2c774c32f45..000000000000 --- a/drivers/i2c/chips/adm1021.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - adm1021.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and - Philip Edelbrock <phil@netroedge.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066); - -/* adm1021 constants specified below */ - -/* The adm1021 registers */ -/* Read-only */ -#define ADM1021_REG_TEMP 0x00 -#define ADM1021_REG_REMOTE_TEMP 0x01 -#define ADM1021_REG_STATUS 0x02 -#define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/ -#define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */ -#define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */ -/* These use different addresses for reading/writing */ -#define ADM1021_REG_CONFIG_R 0x03 -#define ADM1021_REG_CONFIG_W 0x09 -#define ADM1021_REG_CONV_RATE_R 0x04 -#define ADM1021_REG_CONV_RATE_W 0x0A -/* These are for the ADM1023's additional precision on the remote temp sensor */ -#define ADM1021_REG_REM_TEMP_PREC 0x010 -#define ADM1021_REG_REM_OFFSET 0x011 -#define ADM1021_REG_REM_OFFSET_PREC 0x012 -#define ADM1021_REG_REM_TOS_PREC 0x013 -#define ADM1021_REG_REM_THYST_PREC 0x014 -/* limits */ -#define ADM1021_REG_TOS_R 0x05 -#define ADM1021_REG_TOS_W 0x0B -#define ADM1021_REG_REMOTE_TOS_R 0x07 -#define ADM1021_REG_REMOTE_TOS_W 0x0D -#define ADM1021_REG_THYST_R 0x06 -#define ADM1021_REG_THYST_W 0x0C -#define ADM1021_REG_REMOTE_THYST_R 0x08 -#define ADM1021_REG_REMOTE_THYST_W 0x0E -/* write-only */ -#define ADM1021_REG_ONESHOT 0x0F - - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ -/* Conversions note: 1021 uses normal integer signed-byte format*/ -#define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000) -#define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255)) - -/* Initial values */ - -/* Note: Even though I left the low and high limits named os and hyst, -they don't quite work like a thermostat the way the LM75 does. I.e., -a lower temp than THYST actually triggers an alarm instead of -clearing it. Weird, ey? --Phil */ - -/* Each client has this additional data */ -struct adm1021_data { - struct i2c_client client; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 temp_max; /* Register values */ - u8 temp_hyst; - u8 temp_input; - u8 remote_temp_max; - u8 remote_temp_hyst; - u8 remote_temp_input; - u8 alarms; - /* Special values for ADM1023 only */ - u8 remote_temp_prec; - u8 remote_temp_os_prec; - u8 remote_temp_hyst_prec; - u8 remote_temp_offset; - u8 remote_temp_offset_prec; -}; - -static int adm1021_attach_adapter(struct i2c_adapter *adapter); -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); -static void adm1021_init_client(struct i2c_client *client); -static int adm1021_detach_client(struct i2c_client *client); -static int adm1021_read_value(struct i2c_client *client, u8 reg); -static int adm1021_write_value(struct i2c_client *client, u8 reg, - u16 value); -static struct adm1021_data *adm1021_update_device(struct device *dev); - -/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static int read_only = 0; - - -/* This is the driver that will be inserted */ -static struct i2c_driver adm1021_driver = { - .owner = THIS_MODULE, - .name = "adm1021", - .id = I2C_DRIVERID_ADM1021, - .flags = I2C_DF_NOTIFY, - .attach_adapter = adm1021_attach_adapter, - .detach_client = adm1021_detach_client, -}; - -#define show(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1021_data *data = adm1021_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ -} -show(temp_max); -show(temp_hyst); -show(temp_input); -show(remote_temp_max); -show(remote_temp_hyst); -show(remote_temp_input); - -#define show2(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1021_data *data = adm1021_update_device(dev); \ - return sprintf(buf, "%d\n", data->value); \ -} -show2(alarms); - -#define set(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm1021_data *data = i2c_get_clientdata(client); \ - int temp = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(temp); \ - adm1021_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} -set(temp_max, ADM1021_REG_TOS_W); -set(temp_hyst, ADM1021_REG_THYST_W); -set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W); -set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W); - -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); -static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max); -static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst); -static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - - -static int adm1021_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, adm1021_detect); -} - -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i; - struct i2c_client *new_client; - struct adm1021_data *data; - int err = 0; - const char *type_name = ""; - - /* Make sure we aren't probing the ISA bus!! This is just a safety check - at this moment; i2c_detect really won't call us. */ -#ifdef DEBUG - if (i2c_is_isa_adapter(adapter)) { - dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n"); - return 0; - } -#endif - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto error0; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1021_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { - err = -ENOMEM; - goto error0; - } - memset(data, 0, sizeof(struct adm1021_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm1021_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - if (kind < 0) { - if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00 - || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00 - || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) { - err = -ENODEV; - goto error1; - } - } - - /* Determine the chip type. */ - if (kind <= 0) { - i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID); - if (i == 0x41) - if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030) - kind = adm1023; - else - kind = adm1021; - else if (i == 0x49) - kind = thmc10; - else if (i == 0x23) - kind = gl523sm; - else if ((i == 0x4d) && - (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01)) - kind = max1617a; - else if (i == 0x54) - kind = mc1066; - /* LM84 Mfr ID in a different place, and it has more unused bits */ - else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00 - && (kind == 0 /* skip extra detection */ - || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00 - && (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00))) - kind = lm84; - else - kind = max1617; - } - - if (kind == max1617) { - type_name = "max1617"; - } else if (kind == max1617a) { - type_name = "max1617a"; - } else if (kind == adm1021) { - type_name = "adm1021"; - } else if (kind == adm1023) { - type_name = "adm1023"; - } else if (kind == thmc10) { - type_name = "thmc10"; - } else if (kind == lm84) { - type_name = "lm84"; - } else if (kind == gl523sm) { - type_name = "gl523sm"; - } else if (kind == mc1066) { - type_name = "mc1066"; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto error1; - - /* Initialize the ADM1021 chip */ - if (kind != lm84) - adm1021_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -error1: - kfree(data); -error0: - return err; -} - -static void adm1021_init_client(struct i2c_client *client) -{ - /* Enable ADC and disable suspend mode */ - adm1021_write_value(client, ADM1021_REG_CONFIG_W, - adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF); - /* Set Conversion rate to 1/sec (this can be tinkered with) */ - adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04); -} - -static int adm1021_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -/* All registers are byte-sized */ -static int adm1021_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if (!read_only) - return i2c_smbus_write_byte_data(client, reg, value); - return 0; -} - -static struct adm1021_data *adm1021_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1021_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(&client->dev, "Starting adm1021 update\n"); - - data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP); - data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R); - data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R); - data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP); - data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R); - data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R); - data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c; - if (data->type == adm1023) { - data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC); - data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC); - data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC); - data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET); - data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC); - } - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_adm1021_init(void) -{ - return i2c_add_driver(&adm1021_driver); -} - -static void __exit sensors_adm1021_exit(void) -{ - i2c_del_driver(&adm1021_driver); -} - -MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("adm1021 driver"); -MODULE_LICENSE("GPL"); - -module_param(read_only, bool, 0); -MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); - -module_init(sensors_adm1021_init) -module_exit(sensors_adm1021_exit) diff --git a/drivers/i2c/chips/adm1025.c b/drivers/i2c/chips/adm1025.c deleted file mode 100644 index e452d0daf906..000000000000 --- a/drivers/i2c/chips/adm1025.c +++ /dev/null @@ -1,577 +0,0 @@ -/* - * adm1025.c - * - * Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com> - * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> - * - * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6 - * voltages (including its own power source) and up to two temperatures - * (its own plus up to one external one). Voltages are scaled internally - * (which is not the common way) with ratios such that the nominal value - * of each voltage correspond to a register value of 192 (which means a - * resolution of about 0.5% of the nominal value). Temperature values are - * reported with a 1 deg resolution and a 3 deg accuracy. Complete - * datasheet can be obtained from Analog's website at: - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html - * - * This driver also supports the ADM1025A, which differs from the ADM1025 - * only in that it has "open-drain VID inputs while the ADM1025 has - * on-chip 100k pull-ups on the VID inputs". It doesn't make any - * difference for us. - * - * This driver also supports the NE1619, a sensor chip made by Philips. - * That chip is similar to the ADM1025A, with a few differences. The only - * difference that matters to us is that the NE1619 has only two possible - * addresses while the ADM1025A has a third one. Complete datasheet can be - * obtained from Philips's website at: - * http://www.semiconductors.philips.com/pip/NE1619DS.html - * - * Since the ADM1025 was the first chipset supported by this driver, most - * comments will refer to this chipset, but are actually general and - * concern all supported chipsets, unless mentioned otherwise. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> - -/* - * Addresses to scan - * ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e. - * NE1619 has two possible addresses: 0x2c and 0x2d. - */ - -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_2(adm1025, ne1619); - -/* - * The ADM1025 registers - */ - -#define ADM1025_REG_MAN_ID 0x3E -#define ADM1025_REG_CHIP_ID 0x3F -#define ADM1025_REG_CONFIG 0x40 -#define ADM1025_REG_STATUS1 0x41 -#define ADM1025_REG_STATUS2 0x42 -#define ADM1025_REG_IN(nr) (0x20 + (nr)) -#define ADM1025_REG_IN_MAX(nr) (0x2B + (nr) * 2) -#define ADM1025_REG_IN_MIN(nr) (0x2C + (nr) * 2) -#define ADM1025_REG_TEMP(nr) (0x26 + (nr)) -#define ADM1025_REG_TEMP_HIGH(nr) (0x37 + (nr) * 2) -#define ADM1025_REG_TEMP_LOW(nr) (0x38 + (nr) * 2) -#define ADM1025_REG_VID 0x47 -#define ADM1025_REG_VID4 0x49 - -/* - * Conversions and various macros - * The ADM1025 uses signed 8-bit values for temperatures. - */ - -static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 }; - -#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192) -#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \ - (val) * 192 >= (scale) * 255 ? 255 : \ - ((val) * 192 + (scale)/2) / (scale)) - -#define TEMP_FROM_REG(reg) ((reg) * 1000) -#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \ - (val) >= 126500 ? 127 : \ - (((val) < 0 ? (val)-500 : (val)+500) / 1000)) - -/* - * Functions declaration - */ - -static int adm1025_attach_adapter(struct i2c_adapter *adapter); -static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind); -static void adm1025_init_client(struct i2c_client *client); -static int adm1025_detach_client(struct i2c_client *client); -static struct adm1025_data *adm1025_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver adm1025_driver = { - .owner = THIS_MODULE, - .name = "adm1025", - .id = I2C_DRIVERID_ADM1025, - .flags = I2C_DF_NOTIFY, - .attach_adapter = adm1025_attach_adapter, - .detach_client = adm1025_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct adm1025_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - u8 in[6]; /* register value */ - u8 in_max[6]; /* register value */ - u8 in_min[6]; /* register value */ - s8 temp[2]; /* register value */ - s8 temp_min[2]; /* register value */ - s8 temp_max[2]; /* register value */ - u16 alarms; /* register values, combined */ - u8 vid; /* register values, combined */ - u8 vrm; -}; - -/* - * Sysfs stuff - */ - -#define show_in(offset) \ -static ssize_t show_in##offset(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1025_data *data = adm1025_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ - in_scale[offset])); \ -} \ -static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1025_data *data = adm1025_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ - in_scale[offset])); \ -} \ -static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1025_data *data = adm1025_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ - in_scale[offset])); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); -show_in(0); -show_in(1); -show_in(2); -show_in(3); -show_in(4); -show_in(5); - -#define show_temp(offset) \ -static ssize_t show_temp##offset(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1025_data *data = adm1025_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ -} \ -static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1025_data *data = adm1025_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \ -} \ -static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1025_data *data = adm1025_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \ -}\ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp##offset, NULL); -show_temp(1); -show_temp(2); - -#define set_in(offset) \ -static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm1025_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_min[offset] = IN_TO_REG(val, in_scale[offset]); \ - i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(offset), \ - data->in_min[offset]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm1025_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_max[offset] = IN_TO_REG(val, in_scale[offset]); \ - i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(offset), \ - data->in_max[offset]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ - show_in##offset##_max, set_in##offset##_max); -set_in(0); -set_in(1); -set_in(2); -set_in(3); -set_in(4); -set_in(5); - -#define set_temp(offset) \ -static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm1025_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_min[offset-1] = TEMP_TO_REG(val); \ - i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(offset-1), \ - data->temp_min[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm1025_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_max[offset-1] = TEMP_TO_REG(val); \ - i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(offset-1), \ - data->temp_max[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_temp##offset##_min, set_temp##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_temp##offset##_max, set_temp##offset##_max); -set_temp(1); -set_temp(2); - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1025_data *data = adm1025_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1025_data *data = adm1025_update_device(dev); - return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); -} -/* in1_ref is deprecated in favour of cpu0_vid, remove after 2005-11-11 */ -static DEVICE_ATTR(in1_ref, S_IRUGO, show_vid, NULL); -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); - -static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1025_data *data = adm1025_update_device(dev); - return sprintf(buf, "%u\n", data->vrm); -} -static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1025_data *data = i2c_get_clientdata(client); - data->vrm = simple_strtoul(buf, NULL, 10); - return count; -} -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); - -/* - * Real code - */ - -static int adm1025_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, adm1025_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct adm1025_data *data; - int err = 0; - const char *name = ""; - u8 config; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct adm1025_data)); - - /* The common I2C client data is placed right before the - ADM1025-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm1025_driver; - new_client->flags = 0; - - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG); - if (kind < 0) { /* detection */ - if ((config & 0x80) != 0x00 - || (i2c_smbus_read_byte_data(new_client, - ADM1025_REG_STATUS1) & 0xC0) != 0x00 - || (i2c_smbus_read_byte_data(new_client, - ADM1025_REG_STATUS2) & 0xBC) != 0x00) { - dev_dbg(&adapter->dev, - "ADM1025 detection failed at 0x%02x.\n", - address); - goto exit_free; - } - } - - if (kind <= 0) { /* identification */ - u8 man_id, chip_id; - - man_id = i2c_smbus_read_byte_data(new_client, - ADM1025_REG_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - ADM1025_REG_CHIP_ID); - - if (man_id == 0x41) { /* Analog Devices */ - if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */ - kind = adm1025; - } - } else - if (man_id == 0xA1) { /* Philips */ - if (address != 0x2E - && (chip_id & 0xF0) == 0x20) { /* NE1619 */ - kind = ne1619; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; - } - } - - if (kind == adm1025) { - name = "adm1025"; - } else if (kind == ne1619) { - name = "ne1619"; - } - - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the ADM1025 chip */ - adm1025_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_alarms); - /* in1_ref is deprecated, remove after 2005-11-11 */ - device_create_file(&new_client->dev, &dev_attr_in1_ref); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); - - /* Pin 11 is either in4 (+12V) or VID4 */ - if (!(config & 0x20)) { - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - } - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static void adm1025_init_client(struct i2c_client *client) -{ - u8 reg; - struct adm1025_data *data = i2c_get_clientdata(client); - int i; - - data->vrm = i2c_which_vrm(); - - /* - * Set high limits - * Usually we avoid setting limits on driver init, but it happens - * that the ADM1025 comes with stupid default limits (all registers - * set to 0). In case the chip has not gone through any limit - * setting yet, we better set the high limits to the max so that - * no alarm triggers. - */ - for (i=0; i<6; i++) { - reg = i2c_smbus_read_byte_data(client, - ADM1025_REG_IN_MAX(i)); - if (reg == 0) - i2c_smbus_write_byte_data(client, - ADM1025_REG_IN_MAX(i), - 0xFF); - } - for (i=0; i<2; i++) { - reg = i2c_smbus_read_byte_data(client, - ADM1025_REG_TEMP_HIGH(i)); - if (reg == 0) - i2c_smbus_write_byte_data(client, - ADM1025_REG_TEMP_HIGH(i), - 0x7F); - } - - /* - * Start the conversions - */ - reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG); - if (!(reg & 0x01)) - i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG, - (reg&0x7E)|0x01); -} - -static int adm1025_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static struct adm1025_data *adm1025_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1025_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - int i; - - dev_dbg(&client->dev, "Updating data.\n"); - for (i=0; i<6; i++) { - data->in[i] = i2c_smbus_read_byte_data(client, - ADM1025_REG_IN(i)); - data->in_min[i] = i2c_smbus_read_byte_data(client, - ADM1025_REG_IN_MIN(i)); - data->in_max[i] = i2c_smbus_read_byte_data(client, - ADM1025_REG_IN_MAX(i)); - } - for (i=0; i<2; i++) { - data->temp[i] = i2c_smbus_read_byte_data(client, - ADM1025_REG_TEMP(i)); - data->temp_min[i] = i2c_smbus_read_byte_data(client, - ADM1025_REG_TEMP_LOW(i)); - data->temp_max[i] = i2c_smbus_read_byte_data(client, - ADM1025_REG_TEMP_HIGH(i)); - } - data->alarms = i2c_smbus_read_byte_data(client, - ADM1025_REG_STATUS1) - | (i2c_smbus_read_byte_data(client, - ADM1025_REG_STATUS2) << 8); - data->vid = (i2c_smbus_read_byte_data(client, - ADM1025_REG_VID) & 0x0f) - | ((i2c_smbus_read_byte_data(client, - ADM1025_REG_VID4) & 0x01) << 4); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_adm1025_init(void) -{ - return i2c_add_driver(&adm1025_driver); -} - -static void __exit sensors_adm1025_exit(void) -{ - i2c_del_driver(&adm1025_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("ADM1025 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_adm1025_init); -module_exit(sensors_adm1025_exit); diff --git a/drivers/i2c/chips/adm1026.c b/drivers/i2c/chips/adm1026.c deleted file mode 100644 index 3c85fe150cd7..000000000000 --- a/drivers/i2c/chips/adm1026.c +++ /dev/null @@ -1,1714 +0,0 @@ -/* - adm1026.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (C) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> - Copyright (C) 2004 Justin Thiessen <jthiessen@penguincomputing.com> - - Chip details at: - - <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> -#include <linux/hwmon-sysfs.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(adm1026); - -static int gpio_input[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1 }; -static int gpio_output[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1 }; -static int gpio_inverted[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1 }; -static int gpio_normal[17] = { -1, -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, -1, -1, -1, -1, -1 }; -static int gpio_fan[8] = { -1, -1, -1, -1, -1, -1, -1, -1 }; -module_param_array(gpio_input,int,NULL,0); -MODULE_PARM_DESC(gpio_input,"List of GPIO pins (0-16) to program as inputs"); -module_param_array(gpio_output,int,NULL,0); -MODULE_PARM_DESC(gpio_output,"List of GPIO pins (0-16) to program as " - "outputs"); -module_param_array(gpio_inverted,int,NULL,0); -MODULE_PARM_DESC(gpio_inverted,"List of GPIO pins (0-16) to program as " - "inverted"); -module_param_array(gpio_normal,int,NULL,0); -MODULE_PARM_DESC(gpio_normal,"List of GPIO pins (0-16) to program as " - "normal/non-inverted"); -module_param_array(gpio_fan,int,NULL,0); -MODULE_PARM_DESC(gpio_fan,"List of GPIO pins (0-7) to program as fan tachs"); - -/* Many ADM1026 constants specified below */ - -/* The ADM1026 registers */ -#define ADM1026_REG_CONFIG1 0x00 -#define CFG1_MONITOR 0x01 -#define CFG1_INT_ENABLE 0x02 -#define CFG1_INT_CLEAR 0x04 -#define CFG1_AIN8_9 0x08 -#define CFG1_THERM_HOT 0x10 -#define CFG1_DAC_AFC 0x20 -#define CFG1_PWM_AFC 0x40 -#define CFG1_RESET 0x80 -#define ADM1026_REG_CONFIG2 0x01 -/* CONFIG2 controls FAN0/GPIO0 through FAN7/GPIO7 */ -#define ADM1026_REG_CONFIG3 0x07 -#define CFG3_GPIO16_ENABLE 0x01 -#define CFG3_CI_CLEAR 0x02 -#define CFG3_VREF_250 0x04 -#define CFG3_GPIO16_DIR 0x40 -#define CFG3_GPIO16_POL 0x80 -#define ADM1026_REG_E2CONFIG 0x13 -#define E2CFG_READ 0x01 -#define E2CFG_WRITE 0x02 -#define E2CFG_ERASE 0x04 -#define E2CFG_ROM 0x08 -#define E2CFG_CLK_EXT 0x80 - -/* There are 10 general analog inputs and 7 dedicated inputs - * They are: - * 0 - 9 = AIN0 - AIN9 - * 10 = Vbat - * 11 = 3.3V Standby - * 12 = 3.3V Main - * 13 = +5V - * 14 = Vccp (CPU core voltage) - * 15 = +12V - * 16 = -12V - */ -static u16 ADM1026_REG_IN[] = { - 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, - 0x36, 0x37, 0x27, 0x29, 0x26, 0x2a, - 0x2b, 0x2c, 0x2d, 0x2e, 0x2f - }; -static u16 ADM1026_REG_IN_MIN[] = { - 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, - 0x5e, 0x5f, 0x6d, 0x49, 0x6b, 0x4a, - 0x4b, 0x4c, 0x4d, 0x4e, 0x4f - }; -static u16 ADM1026_REG_IN_MAX[] = { - 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, - 0x56, 0x57, 0x6c, 0x41, 0x6a, 0x42, - 0x43, 0x44, 0x45, 0x46, 0x47 - }; - -/* Temperatures are: - * 0 - Internal - * 1 - External 1 - * 2 - External 2 - */ -static u16 ADM1026_REG_TEMP[] = { 0x1f, 0x28, 0x29 }; -static u16 ADM1026_REG_TEMP_MIN[] = { 0x69, 0x48, 0x49 }; -static u16 ADM1026_REG_TEMP_MAX[] = { 0x68, 0x40, 0x41 }; -static u16 ADM1026_REG_TEMP_TMIN[] = { 0x10, 0x11, 0x12 }; -static u16 ADM1026_REG_TEMP_THERM[] = { 0x0d, 0x0e, 0x0f }; -static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f }; - -#define ADM1026_REG_FAN(nr) (0x38 + (nr)) -#define ADM1026_REG_FAN_MIN(nr) (0x60 + (nr)) -#define ADM1026_REG_FAN_DIV_0_3 0x02 -#define ADM1026_REG_FAN_DIV_4_7 0x03 - -#define ADM1026_REG_DAC 0x04 -#define ADM1026_REG_PWM 0x05 - -#define ADM1026_REG_GPIO_CFG_0_3 0x08 -#define ADM1026_REG_GPIO_CFG_4_7 0x09 -#define ADM1026_REG_GPIO_CFG_8_11 0x0a -#define ADM1026_REG_GPIO_CFG_12_15 0x0b -/* CFG_16 in REG_CFG3 */ -#define ADM1026_REG_GPIO_STATUS_0_7 0x24 -#define ADM1026_REG_GPIO_STATUS_8_15 0x25 -/* STATUS_16 in REG_STATUS4 */ -#define ADM1026_REG_GPIO_MASK_0_7 0x1c -#define ADM1026_REG_GPIO_MASK_8_15 0x1d -/* MASK_16 in REG_MASK4 */ - -#define ADM1026_REG_COMPANY 0x16 -#define ADM1026_REG_VERSTEP 0x17 -/* These are the recognized values for the above regs */ -#define ADM1026_COMPANY_ANALOG_DEV 0x41 -#define ADM1026_VERSTEP_GENERIC 0x40 -#define ADM1026_VERSTEP_ADM1026 0x44 - -#define ADM1026_REG_MASK1 0x18 -#define ADM1026_REG_MASK2 0x19 -#define ADM1026_REG_MASK3 0x1a -#define ADM1026_REG_MASK4 0x1b - -#define ADM1026_REG_STATUS1 0x20 -#define ADM1026_REG_STATUS2 0x21 -#define ADM1026_REG_STATUS3 0x22 -#define ADM1026_REG_STATUS4 0x23 - -#define ADM1026_FAN_ACTIVATION_TEMP_HYST -6 -#define ADM1026_FAN_CONTROL_TEMP_RANGE 20 -#define ADM1026_PWM_MAX 255 - -/* Conversions. Rounding and limit checking is only done on the TO_REG - * variants. Note that you should be a bit careful with which arguments - * these macros are called: arguments may be evaluated more than once. - */ - -/* IN are scaled acording to built-in resistors. These are the - * voltages corresponding to 3/4 of full scale (192 or 0xc0) - * NOTE: The -12V input needs an additional factor to account - * for the Vref pullup resistor. - * NEG12_OFFSET = SCALE * Vref / V-192 - Vref - * = 13875 * 2.50 / 1.875 - 2500 - * = 16000 - * - * The values in this table are based on Table II, page 15 of the - * datasheet. - */ -static int adm1026_scaling[] = { /* .001 Volts */ - 2250, 2250, 2250, 2250, 2250, 2250, - 1875, 1875, 1875, 1875, 3000, 3330, - 3330, 4995, 2250, 12000, 13875 - }; -#define NEG12_OFFSET 16000 -#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) -#define INS_TO_REG(n,val) (SENSORS_LIMIT(SCALE(val,adm1026_scaling[n],192),\ - 0,255)) -#define INS_FROM_REG(n,val) (SCALE(val,192,adm1026_scaling[n])) - -/* FAN speed is measured using 22.5kHz clock and counts for 2 pulses - * and we assume a 2 pulse-per-rev fan tach signal - * 22500 kHz * 60 (sec/min) * 2 (pulse) / 2 (pulse/rev) == 1350000 - */ -#define FAN_TO_REG(val,div) ((val)<=0 ? 0xff : SENSORS_LIMIT(1350000/((val)*\ - (div)),1,254)) -#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==0xff ? 0 : 1350000/((val)*\ - (div))) -#define DIV_FROM_REG(val) (1<<(val)) -#define DIV_TO_REG(val) ((val)>=8 ? 3 : (val)>=4 ? 2 : (val)>=2 ? 1 : 0) - -/* Temperature is reported in 1 degC increments */ -#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\ - -127,127)) -#define TEMP_FROM_REG(val) ((val) * 1000) -#define OFFSET_TO_REG(val) (SENSORS_LIMIT(((val)+((val)<0 ? -500 : 500))/1000,\ - -127,127)) -#define OFFSET_FROM_REG(val) ((val) * 1000) - -#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) -#define PWM_FROM_REG(val) (val) - -#define PWM_MIN_TO_REG(val) ((val) & 0xf0) -#define PWM_MIN_FROM_REG(val) (((val) & 0xf0) + ((val) >> 4)) - -/* Analog output is a voltage, and scaled to millivolts. The datasheet - * indicates that the DAC could be used to drive the fans, but in our - * example board (Arima HDAMA) it isn't connected to the fans at all. - */ -#define DAC_TO_REG(val) (SENSORS_LIMIT(((((val)*255)+500)/2500),0,255)) -#define DAC_FROM_REG(val) (((val)*2500)/255) - -/* Typically used with systems using a v9.1 VRM spec ? */ -#define ADM1026_INIT_VRM 91 - -/* Chip sampling rates - * - * Some sensors are not updated more frequently than once per second - * so it doesn't make sense to read them more often than that. - * We cache the results and return the saved data if the driver - * is called again before a second has elapsed. - * - * Also, there is significant configuration data for this chip - * So, we keep the config data up to date in the cache - * when it is written and only sample it once every 5 *minutes* - */ -#define ADM1026_DATA_INTERVAL (1 * HZ) -#define ADM1026_CONFIG_INTERVAL (5 * 60 * HZ) - -/* We allow for multiple chips in a single system. - * - * For each registered ADM1026, we need to keep state information - * at client->data. The adm1026_data structure is dynamically - * allocated, when a new client structure is allocated. */ - -struct pwm_data { - u8 pwm; - u8 enable; - u8 auto_pwm_min; -}; - -struct adm1026_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - int valid; /* !=0 if following fields are valid */ - unsigned long last_reading; /* In jiffies */ - unsigned long last_config; /* In jiffies */ - - u8 in[17]; /* Register value */ - u8 in_max[17]; /* Register value */ - u8 in_min[17]; /* Register value */ - s8 temp[3]; /* Register value */ - s8 temp_min[3]; /* Register value */ - s8 temp_max[3]; /* Register value */ - s8 temp_tmin[3]; /* Register value */ - s8 temp_crit[3]; /* Register value */ - s8 temp_offset[3]; /* Register value */ - u8 fan[8]; /* Register value */ - u8 fan_min[8]; /* Register value */ - u8 fan_div[8]; /* Decoded value */ - struct pwm_data pwm1; /* Pwm control values */ - int vid; /* Decoded value */ - u8 vrm; /* VRM version */ - u8 analog_out; /* Register value (DAC) */ - long alarms; /* Register encoding, combined */ - long alarm_mask; /* Register encoding, combined */ - long gpio; /* Register encoding, combined */ - long gpio_mask; /* Register encoding, combined */ - u8 gpio_config[17]; /* Decoded value */ - u8 config1; /* Register value */ - u8 config2; /* Register value */ - u8 config3; /* Register value */ -}; - -static int adm1026_attach_adapter(struct i2c_adapter *adapter); -static int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind); -static int adm1026_detach_client(struct i2c_client *client); -static int adm1026_read_value(struct i2c_client *client, u8 register); -static int adm1026_write_value(struct i2c_client *client, u8 register, - int value); -static void adm1026_print_gpio(struct i2c_client *client); -static void adm1026_fixup_gpio(struct i2c_client *client); -static struct adm1026_data *adm1026_update_device(struct device *dev); -static void adm1026_init_client(struct i2c_client *client); - - -static struct i2c_driver adm1026_driver = { - .owner = THIS_MODULE, - .name = "adm1026", - .flags = I2C_DF_NOTIFY, - .attach_adapter = adm1026_attach_adapter, - .detach_client = adm1026_detach_client, -}; - -int adm1026_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) { - return 0; - } - return i2c_detect(adapter, &addr_data, adm1026_detect); -} - -int adm1026_detach_client(struct i2c_client *client) -{ - i2c_detach_client(client); - kfree(client); - return 0; -} - -int adm1026_read_value(struct i2c_client *client, u8 reg) -{ - int res; - - if (reg < 0x80) { - /* "RAM" locations */ - res = i2c_smbus_read_byte_data(client, reg) & 0xff; - } else { - /* EEPROM, do nothing */ - res = 0; - } - return res; -} - -int adm1026_write_value(struct i2c_client *client, u8 reg, int value) -{ - int res; - - if (reg < 0x80) { - /* "RAM" locations */ - res = i2c_smbus_write_byte_data(client, reg, value); - } else { - /* EEPROM, do nothing */ - res = 0; - } - return res; -} - -void adm1026_init_client(struct i2c_client *client) -{ - int value, i; - struct adm1026_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "Initializing device\n"); - /* Read chip config */ - data->config1 = adm1026_read_value(client, ADM1026_REG_CONFIG1); - data->config2 = adm1026_read_value(client, ADM1026_REG_CONFIG2); - data->config3 = adm1026_read_value(client, ADM1026_REG_CONFIG3); - - /* Inform user of chip config */ - dev_dbg(&client->dev, "ADM1026_REG_CONFIG1 is: 0x%02x\n", - data->config1); - if ((data->config1 & CFG1_MONITOR) == 0) { - dev_dbg(&client->dev, "Monitoring not currently " - "enabled.\n"); - } - if (data->config1 & CFG1_INT_ENABLE) { - dev_dbg(&client->dev, "SMBALERT interrupts are " - "enabled.\n"); - } - if (data->config1 & CFG1_AIN8_9) { - dev_dbg(&client->dev, "in8 and in9 enabled. " - "temp3 disabled.\n"); - } else { - dev_dbg(&client->dev, "temp3 enabled. in8 and " - "in9 disabled.\n"); - } - if (data->config1 & CFG1_THERM_HOT) { - dev_dbg(&client->dev, "Automatic THERM, PWM, " - "and temp limits enabled.\n"); - } - - value = data->config3; - if (data->config3 & CFG3_GPIO16_ENABLE) { - dev_dbg(&client->dev, "GPIO16 enabled. THERM" - "pin disabled.\n"); - } else { - dev_dbg(&client->dev, "THERM pin enabled. " - "GPIO16 disabled.\n"); - } - if (data->config3 & CFG3_VREF_250) { - dev_dbg(&client->dev, "Vref is 2.50 Volts.\n"); - } else { - dev_dbg(&client->dev, "Vref is 1.82 Volts.\n"); - } - /* Read and pick apart the existing GPIO configuration */ - value = 0; - for (i = 0;i <= 15;++i) { - if ((i & 0x03) == 0) { - value = adm1026_read_value(client, - ADM1026_REG_GPIO_CFG_0_3 + i/4); - } - data->gpio_config[i] = value & 0x03; - value >>= 2; - } - data->gpio_config[16] = (data->config3 >> 6) & 0x03; - - /* ... and then print it */ - adm1026_print_gpio(client); - - /* If the user asks us to reprogram the GPIO config, then - * do it now. - */ - if (gpio_input[0] != -1 || gpio_output[0] != -1 - || gpio_inverted[0] != -1 || gpio_normal[0] != -1 - || gpio_fan[0] != -1) { - adm1026_fixup_gpio(client); - } - - /* WE INTENTIONALLY make no changes to the limits, - * offsets, pwms, fans and zones. If they were - * configured, we don't want to mess with them. - * If they weren't, the default is 100% PWM, no - * control and will suffice until 'sensors -s' - * can be run by the user. We DO set the default - * value for pwm1.auto_pwm_min to its maximum - * so that enabling automatic pwm fan control - * without first setting a value for pwm1.auto_pwm_min - * will not result in potentially dangerous fan speed decrease. - */ - data->pwm1.auto_pwm_min=255; - /* Start monitoring */ - value = adm1026_read_value(client, ADM1026_REG_CONFIG1); - /* Set MONITOR, clear interrupt acknowledge and s/w reset */ - value = (value | CFG1_MONITOR) & (~CFG1_INT_CLEAR & ~CFG1_RESET); - dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); - data->config1 = value; - adm1026_write_value(client, ADM1026_REG_CONFIG1, value); - - /* initialize fan_div[] to hardware defaults */ - value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) | - (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) << 8); - for (i = 0;i <= 7;++i) { - data->fan_div[i] = DIV_FROM_REG(value & 0x03); - value >>= 2; - } -} - -void adm1026_print_gpio(struct i2c_client *client) -{ - struct adm1026_data *data = i2c_get_clientdata(client); - int i; - - dev_dbg(&client->dev, "GPIO config is:"); - for (i = 0;i <= 7;++i) { - if (data->config2 & (1 << i)) { - dev_dbg(&client->dev, "\t%sGP%s%d\n", - data->gpio_config[i] & 0x02 ? "" : "!", - data->gpio_config[i] & 0x01 ? "OUT" : "IN", - i); - } else { - dev_dbg(&client->dev, "\tFAN%d\n", i); - } - } - for (i = 8;i <= 15;++i) { - dev_dbg(&client->dev, "\t%sGP%s%d\n", - data->gpio_config[i] & 0x02 ? "" : "!", - data->gpio_config[i] & 0x01 ? "OUT" : "IN", - i); - } - if (data->config3 & CFG3_GPIO16_ENABLE) { - dev_dbg(&client->dev, "\t%sGP%s16\n", - data->gpio_config[16] & 0x02 ? "" : "!", - data->gpio_config[16] & 0x01 ? "OUT" : "IN"); - } else { - /* GPIO16 is THERM */ - dev_dbg(&client->dev, "\tTHERM\n"); - } -} - -void adm1026_fixup_gpio(struct i2c_client *client) -{ - struct adm1026_data *data = i2c_get_clientdata(client); - int i; - int value; - - /* Make the changes requested. */ - /* We may need to unlock/stop monitoring or soft-reset the - * chip before we can make changes. This hasn't been - * tested much. FIXME - */ - - /* Make outputs */ - for (i = 0;i <= 16;++i) { - if (gpio_output[i] >= 0 && gpio_output[i] <= 16) { - data->gpio_config[gpio_output[i]] |= 0x01; - } - /* if GPIO0-7 is output, it isn't a FAN tach */ - if (gpio_output[i] >= 0 && gpio_output[i] <= 7) { - data->config2 |= 1 << gpio_output[i]; - } - } - - /* Input overrides output */ - for (i = 0;i <= 16;++i) { - if (gpio_input[i] >= 0 && gpio_input[i] <= 16) { - data->gpio_config[gpio_input[i]] &= ~ 0x01; - } - /* if GPIO0-7 is input, it isn't a FAN tach */ - if (gpio_input[i] >= 0 && gpio_input[i] <= 7) { - data->config2 |= 1 << gpio_input[i]; - } - } - - /* Inverted */ - for (i = 0;i <= 16;++i) { - if (gpio_inverted[i] >= 0 && gpio_inverted[i] <= 16) { - data->gpio_config[gpio_inverted[i]] &= ~ 0x02; - } - } - - /* Normal overrides inverted */ - for (i = 0;i <= 16;++i) { - if (gpio_normal[i] >= 0 && gpio_normal[i] <= 16) { - data->gpio_config[gpio_normal[i]] |= 0x02; - } - } - - /* Fan overrides input and output */ - for (i = 0;i <= 7;++i) { - if (gpio_fan[i] >= 0 && gpio_fan[i] <= 7) { - data->config2 &= ~(1 << gpio_fan[i]); - } - } - - /* Write new configs to registers */ - adm1026_write_value(client, ADM1026_REG_CONFIG2, data->config2); - data->config3 = (data->config3 & 0x3f) - | ((data->gpio_config[16] & 0x03) << 6); - adm1026_write_value(client, ADM1026_REG_CONFIG3, data->config3); - for (i = 15, value = 0;i >= 0;--i) { - value <<= 2; - value |= data->gpio_config[i] & 0x03; - if ((i & 0x03) == 0) { - adm1026_write_value(client, - ADM1026_REG_GPIO_CFG_0_3 + i/4, - value); - value = 0; - } - } - - /* Print the new config */ - adm1026_print_gpio(client); -} - - -static struct adm1026_data *adm1026_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int i; - long value, alarms, gpio; - - down(&data->update_lock); - if (!data->valid - || time_after(jiffies, data->last_reading + ADM1026_DATA_INTERVAL)) { - /* Things that change quickly */ - dev_dbg(&client->dev,"Reading sensor values\n"); - for (i = 0;i <= 16;++i) { - data->in[i] = - adm1026_read_value(client, ADM1026_REG_IN[i]); - } - - for (i = 0;i <= 7;++i) { - data->fan[i] = - adm1026_read_value(client, ADM1026_REG_FAN(i)); - } - - for (i = 0;i <= 2;++i) { - /* NOTE: temp[] is s8 and we assume 2's complement - * "conversion" in the assignment */ - data->temp[i] = - adm1026_read_value(client, ADM1026_REG_TEMP[i]); - } - - data->pwm1.pwm = adm1026_read_value(client, - ADM1026_REG_PWM); - data->analog_out = adm1026_read_value(client, - ADM1026_REG_DAC); - /* GPIO16 is MSbit of alarms, move it to gpio */ - alarms = adm1026_read_value(client, ADM1026_REG_STATUS4); - gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */ - alarms &= 0x7f; - alarms <<= 8; - alarms |= adm1026_read_value(client, ADM1026_REG_STATUS3); - alarms <<= 8; - alarms |= adm1026_read_value(client, ADM1026_REG_STATUS2); - alarms <<= 8; - alarms |= adm1026_read_value(client, ADM1026_REG_STATUS1); - data->alarms = alarms; - - /* Read the GPIO values */ - gpio |= adm1026_read_value(client, - ADM1026_REG_GPIO_STATUS_8_15); - gpio <<= 8; - gpio |= adm1026_read_value(client, - ADM1026_REG_GPIO_STATUS_0_7); - data->gpio = gpio; - - data->last_reading = jiffies; - }; /* last_reading */ - - if (!data->valid || - time_after(jiffies, data->last_config + ADM1026_CONFIG_INTERVAL)) { - /* Things that don't change often */ - dev_dbg(&client->dev, "Reading config values\n"); - for (i = 0;i <= 16;++i) { - data->in_min[i] = adm1026_read_value(client, - ADM1026_REG_IN_MIN[i]); - data->in_max[i] = adm1026_read_value(client, - ADM1026_REG_IN_MAX[i]); - } - - value = adm1026_read_value(client, ADM1026_REG_FAN_DIV_0_3) - | (adm1026_read_value(client, ADM1026_REG_FAN_DIV_4_7) - << 8); - for (i = 0;i <= 7;++i) { - data->fan_min[i] = adm1026_read_value(client, - ADM1026_REG_FAN_MIN(i)); - data->fan_div[i] = DIV_FROM_REG(value & 0x03); - value >>= 2; - } - - for (i = 0; i <= 2; ++i) { - /* NOTE: temp_xxx[] are s8 and we assume 2's - * complement "conversion" in the assignment - */ - data->temp_min[i] = adm1026_read_value(client, - ADM1026_REG_TEMP_MIN[i]); - data->temp_max[i] = adm1026_read_value(client, - ADM1026_REG_TEMP_MAX[i]); - data->temp_tmin[i] = adm1026_read_value(client, - ADM1026_REG_TEMP_TMIN[i]); - data->temp_crit[i] = adm1026_read_value(client, - ADM1026_REG_TEMP_THERM[i]); - data->temp_offset[i] = adm1026_read_value(client, - ADM1026_REG_TEMP_OFFSET[i]); - } - - /* Read the STATUS/alarm masks */ - alarms = adm1026_read_value(client, ADM1026_REG_MASK4); - gpio = alarms & 0x80 ? 0x0100 : 0; /* GPIO16 */ - alarms = (alarms & 0x7f) << 8; - alarms |= adm1026_read_value(client, ADM1026_REG_MASK3); - alarms <<= 8; - alarms |= adm1026_read_value(client, ADM1026_REG_MASK2); - alarms <<= 8; - alarms |= adm1026_read_value(client, ADM1026_REG_MASK1); - data->alarm_mask = alarms; - - /* Read the GPIO values */ - gpio |= adm1026_read_value(client, - ADM1026_REG_GPIO_MASK_8_15); - gpio <<= 8; - gpio |= adm1026_read_value(client, ADM1026_REG_GPIO_MASK_0_7); - data->gpio_mask = gpio; - - /* Read various values from CONFIG1 */ - data->config1 = adm1026_read_value(client, - ADM1026_REG_CONFIG1); - if (data->config1 & CFG1_PWM_AFC) { - data->pwm1.enable = 2; - data->pwm1.auto_pwm_min = - PWM_MIN_FROM_REG(data->pwm1.pwm); - } - /* Read the GPIO config */ - data->config2 = adm1026_read_value(client, - ADM1026_REG_CONFIG2); - data->config3 = adm1026_read_value(client, - ADM1026_REG_CONFIG3); - data->gpio_config[16] = (data->config3 >> 6) & 0x03; - - value = 0; - for (i = 0;i <= 15;++i) { - if ((i & 0x03) == 0) { - value = adm1026_read_value(client, - ADM1026_REG_GPIO_CFG_0_3 + i/4); - } - data->gpio_config[i] = value & 0x03; - value >>= 2; - } - - data->last_config = jiffies; - }; /* last_config */ - - dev_dbg(&client->dev, "Setting VID from GPIO11-15.\n"); - data->vid = (data->gpio >> 11) & 0x1f; - data->valid = 1; - up(&data->update_lock); - return data; -} - -static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in[nr])); -} -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr])); -} -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = INS_TO_REG(nr, val); - adm1026_write_value(client, ADM1026_REG_IN_MIN[nr], data->in_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr])); -} -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = INS_TO_REG(nr, val); - adm1026_write_value(client, ADM1026_REG_IN_MAX[nr], data->in_max[nr]); - up(&data->update_lock); - return count; -} - -#define in_reg(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, \ - NULL, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); - - -in_reg(0); -in_reg(1); -in_reg(2); -in_reg(3); -in_reg(4); -in_reg(5); -in_reg(6); -in_reg(7); -in_reg(8); -in_reg(9); -in_reg(10); -in_reg(11); -in_reg(12); -in_reg(13); -in_reg(14); -in_reg(15); - -static ssize_t show_in16(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in[16]) - - NEG12_OFFSET); -} -static ssize_t show_in16_min(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_min[16]) - - NEG12_OFFSET); -} -static ssize_t set_in16_min(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[16] = INS_TO_REG(16, val + NEG12_OFFSET); - adm1026_write_value(client, ADM1026_REG_IN_MIN[16], data->in_min[16]); - up(&data->update_lock); - return count; -} -static ssize_t show_in16_max(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(16, data->in_max[16]) - - NEG12_OFFSET); -} -static ssize_t set_in16_max(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[16] = INS_TO_REG(16, val+NEG12_OFFSET); - adm1026_write_value(client, ADM1026_REG_IN_MAX[16], data->in_max[16]); - up(&data->update_lock); - return count; -} - -static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_in16, NULL, 16); -static SENSOR_DEVICE_ATTR(in16_min, S_IRUGO | S_IWUSR, show_in16_min, set_in16_min, 16); -static SENSOR_DEVICE_ATTR(in16_max, S_IRUGO | S_IWUSR, show_in16_max, set_in16_max, 16); - - - - -/* Now add fan read/write functions */ - -static ssize_t show_fan(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], - data->fan_div[nr])); -} -static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], - data->fan_div[nr])); -} -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, data->fan_div[nr]); - adm1026_write_value(client, ADM1026_REG_FAN_MIN(nr), - data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -#define fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \ - offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); - -fan_offset(1); -fan_offset(2); -fan_offset(3); -fan_offset(4); -fan_offset(5); -fan_offset(6); -fan_offset(7); -fan_offset(8); - -/* Adjust fan_min to account for new fan divisor */ -static void fixup_fan_min(struct device *dev, int fan, int old_div) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int new_min; - int new_div = data->fan_div[fan]; - - /* 0 and 0xff are special. Don't adjust them */ - if (data->fan_min[fan] == 0 || data->fan_min[fan] == 0xff) { - return; - } - - new_min = data->fan_min[fan] * old_div / new_div; - new_min = SENSORS_LIMIT(new_min, 1, 254); - data->fan_min[fan] = new_min; - adm1026_write_value(client, ADM1026_REG_FAN_MIN(fan), new_min); -} - -/* Now add fan_div read/write functions */ -static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", data->fan_div[nr]); -} -static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val,orig_div,new_div,shift; - - val = simple_strtol(buf, NULL, 10); - new_div = DIV_TO_REG(val); - if (new_div == 0) { - return -EINVAL; - } - down(&data->update_lock); - orig_div = data->fan_div[nr]; - data->fan_div[nr] = DIV_FROM_REG(new_div); - - if (nr < 4) { /* 0 <= nr < 4 */ - shift = 2 * nr; - adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3, - ((DIV_TO_REG(orig_div) & (~(0x03 << shift))) | - (new_div << shift))); - } else { /* 3 < nr < 8 */ - shift = 2 * (nr - 4); - adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7, - ((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) | - (new_div << shift))); - } - - if (data->fan_div[nr] != orig_div) { - fixup_fan_min(dev,nr,orig_div); - } - up(&data->update_lock); - return count; -} - -#define fan_offset_div(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); - -fan_offset_div(1); -fan_offset_div(2); -fan_offset_div(3); -fan_offset_div(4); -fan_offset_div(5); -fan_offset_div(6); -fan_offset_div(7); -fan_offset_div(8); - -/* Temps */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp[nr])); -} -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr])); -} -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_min[nr] = TEMP_TO_REG(val); - adm1026_write_value(client, ADM1026_REG_TEMP_MIN[nr], - data->temp_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr])); -} -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_max[nr] = TEMP_TO_REG(val); - adm1026_write_value(client, ADM1026_REG_TEMP_MAX[nr], - data->temp_max[nr]); - up(&data->update_lock); - return count; -} - -#define temp_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ - NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); - - -temp_reg(1); -temp_reg(2); -temp_reg(3); - -static ssize_t show_temp_offset(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_offset[nr])); -} -static ssize_t set_temp_offset(struct device *dev, - struct device_attribute *attr, const char *buf, - size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_offset[nr] = TEMP_TO_REG(val); - adm1026_write_value(client, ADM1026_REG_TEMP_OFFSET[nr], - data->temp_offset[nr]); - up(&data->update_lock); - return count; -} - -#define temp_offset_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \ - show_temp_offset, set_temp_offset, offset - 1); - -temp_offset_reg(1); -temp_offset_reg(2); -temp_offset_reg(3); - -static ssize_t show_temp_auto_point1_temp_hyst(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG( - ADM1026_FAN_ACTIVATION_TEMP_HYST + data->temp_tmin[nr])); -} -static ssize_t show_temp_auto_point2_temp(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr] + - ADM1026_FAN_CONTROL_TEMP_RANGE)); -} -static ssize_t show_temp_auto_point1_temp(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_tmin[nr])); -} -static ssize_t set_temp_auto_point1_temp(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_tmin[nr] = TEMP_TO_REG(val); - adm1026_write_value(client, ADM1026_REG_TEMP_TMIN[nr], - data->temp_tmin[nr]); - up(&data->update_lock); - return count; -} - -#define temp_auto_point(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp, S_IRUGO | S_IWUSR, \ - show_temp_auto_point1_temp, set_temp_auto_point1_temp, \ - offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_point1_temp_hyst, S_IRUGO, \ - show_temp_auto_point1_temp_hyst, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_auto_point2_temp, S_IRUGO, \ - show_temp_auto_point2_temp, NULL, offset - 1); - -temp_auto_point(1); -temp_auto_point(2); -temp_auto_point(3); - -static ssize_t show_temp_crit_enable(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", (data->config1 & CFG1_THERM_HOT) >> 4); -} -static ssize_t set_temp_crit_enable(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - if ((val == 1) || (val==0)) { - down(&data->update_lock); - data->config1 = (data->config1 & ~CFG1_THERM_HOT) | (val << 4); - adm1026_write_value(client, ADM1026_REG_CONFIG1, - data->config1); - up(&data->update_lock); - } - return count; -} - -#define temp_crit_enable(offset) \ -static DEVICE_ATTR(temp##offset##_crit_enable, S_IRUGO | S_IWUSR, \ - show_temp_crit_enable, set_temp_crit_enable); - -temp_crit_enable(1); -temp_crit_enable(2); -temp_crit_enable(3); - -static ssize_t show_temp_crit(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_crit[nr])); -} -static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_crit[nr] = TEMP_TO_REG(val); - adm1026_write_value(client, ADM1026_REG_TEMP_THERM[nr], - data->temp_crit[nr]); - up(&data->update_lock); - return count; -} - -#define temp_crit_reg(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \ - show_temp_crit, set_temp_crit, offset - 1); - -temp_crit_reg(1); -temp_crit_reg(2); -temp_crit_reg(3); - -static ssize_t show_analog_out_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", DAC_FROM_REG(data->analog_out)); -} -static ssize_t set_analog_out_reg(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->analog_out = DAC_TO_REG(val); - adm1026_write_value(client, ADM1026_REG_DAC, data->analog_out); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(analog_out, S_IRUGO | S_IWUSR, show_analog_out_reg, - set_analog_out_reg); - -static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", vid_from_reg(data->vid & 0x3f, data->vrm)); -} -/* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */ -static DEVICE_ATTR(vid, S_IRUGO, show_vid_reg, NULL); -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); - -static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", data->vrm); -} -static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - - data->vrm = simple_strtol(buf, NULL, 10); - return count; -} - -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); - -static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf, "%ld\n", (long) (data->alarms)); -} - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); - -static ssize_t show_alarm_mask(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%ld\n", data->alarm_mask); -} -static ssize_t set_alarm_mask(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - unsigned long mask; - - down(&data->update_lock); - data->alarm_mask = val & 0x7fffffff; - mask = data->alarm_mask - | (data->gpio_mask & 0x10000 ? 0x80000000 : 0); - adm1026_write_value(client, ADM1026_REG_MASK1, - mask & 0xff); - mask >>= 8; - adm1026_write_value(client, ADM1026_REG_MASK2, - mask & 0xff); - mask >>= 8; - adm1026_write_value(client, ADM1026_REG_MASK3, - mask & 0xff); - mask >>= 8; - adm1026_write_value(client, ADM1026_REG_MASK4, - mask & 0xff); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(alarm_mask, S_IRUGO | S_IWUSR, show_alarm_mask, - set_alarm_mask); - - -static ssize_t show_gpio(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%ld\n", data->gpio); -} -static ssize_t set_gpio(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - long gpio; - - down(&data->update_lock); - data->gpio = val & 0x1ffff; - gpio = data->gpio; - adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_0_7,gpio & 0xff); - gpio >>= 8; - adm1026_write_value(client, ADM1026_REG_GPIO_STATUS_8_15,gpio & 0xff); - gpio = ((gpio >> 1) & 0x80) | (data->alarms >> 24 & 0x7f); - adm1026_write_value(client, ADM1026_REG_STATUS4,gpio & 0xff); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(gpio, S_IRUGO | S_IWUSR, show_gpio, set_gpio); - - -static ssize_t show_gpio_mask(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%ld\n", data->gpio_mask); -} -static ssize_t set_gpio_mask(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - long mask; - - down(&data->update_lock); - data->gpio_mask = val & 0x1ffff; - mask = data->gpio_mask; - adm1026_write_value(client, ADM1026_REG_GPIO_MASK_0_7,mask & 0xff); - mask >>= 8; - adm1026_write_value(client, ADM1026_REG_GPIO_MASK_8_15,mask & 0xff); - mask = ((mask >> 1) & 0x80) | (data->alarm_mask >> 24 & 0x7f); - adm1026_write_value(client, ADM1026_REG_MASK1,mask & 0xff); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(gpio_mask, S_IRUGO | S_IWUSR, show_gpio_mask, set_gpio_mask); - -static ssize_t show_pwm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm1.pwm)); -} -static ssize_t set_pwm_reg(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - - if (data->pwm1.enable == 1) { - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->pwm1.pwm = PWM_TO_REG(val); - adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm); - up(&data->update_lock); - } - return count; -} -static ssize_t show_auto_pwm_min(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", data->pwm1.auto_pwm_min); -} -static ssize_t set_auto_pwm_min(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->pwm1.auto_pwm_min = SENSORS_LIMIT(val,0,255); - if (data->pwm1.enable == 2) { /* apply immediately */ - data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) | - PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); - adm1026_write_value(client, ADM1026_REG_PWM, data->pwm1.pwm); - } - up(&data->update_lock); - return count; -} -static ssize_t show_auto_pwm_max(struct device *dev, struct device_attribute *attr, char *buf) -{ - return sprintf(buf,"%d\n", ADM1026_PWM_MAX); -} -static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1026_data *data = adm1026_update_device(dev); - return sprintf(buf,"%d\n", data->pwm1.enable); -} -static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1026_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - int old_enable; - - if ((val >= 0) && (val < 3)) { - down(&data->update_lock); - old_enable = data->pwm1.enable; - data->pwm1.enable = val; - data->config1 = (data->config1 & ~CFG1_PWM_AFC) - | ((val == 2) ? CFG1_PWM_AFC : 0); - adm1026_write_value(client, ADM1026_REG_CONFIG1, - data->config1); - if (val == 2) { /* apply pwm1_auto_pwm_min to pwm1 */ - data->pwm1.pwm = PWM_TO_REG((data->pwm1.pwm & 0x0f) | - PWM_MIN_TO_REG(data->pwm1.auto_pwm_min)); - adm1026_write_value(client, ADM1026_REG_PWM, - data->pwm1.pwm); - } else if (!((old_enable == 1) && (val == 1))) { - /* set pwm to safe value */ - data->pwm1.pwm = 255; - adm1026_write_value(client, ADM1026_REG_PWM, - data->pwm1.pwm); - } - up(&data->update_lock); - } - return count; -} - -/* enable PWM fan control */ -static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); -static DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); -static DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm_reg, set_pwm_reg); -static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, show_pwm_enable, - set_pwm_enable); -static DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR, show_pwm_enable, - set_pwm_enable); -static DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR, show_pwm_enable, - set_pwm_enable); -static DEVICE_ATTR(temp1_auto_point1_pwm, S_IRUGO | S_IWUSR, - show_auto_pwm_min, set_auto_pwm_min); -static DEVICE_ATTR(temp2_auto_point1_pwm, S_IRUGO | S_IWUSR, - show_auto_pwm_min, set_auto_pwm_min); -static DEVICE_ATTR(temp3_auto_point1_pwm, S_IRUGO | S_IWUSR, - show_auto_pwm_min, set_auto_pwm_min); - -static DEVICE_ATTR(temp1_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); -static DEVICE_ATTR(temp2_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); -static DEVICE_ATTR(temp3_auto_point2_pwm, S_IRUGO, show_auto_pwm_max, NULL); - -int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind) -{ - int company, verstep; - struct i2c_client *new_client; - struct adm1026_data *data; - int err = 0; - const char *type_name = ""; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - /* We need to be able to do byte I/O */ - goto exit; - }; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1026_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - memset(data, 0, sizeof(struct adm1026_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm1026_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - company = adm1026_read_value(new_client, ADM1026_REG_COMPANY); - verstep = adm1026_read_value(new_client, ADM1026_REG_VERSTEP); - - dev_dbg(&new_client->dev, "Detecting device at %d,0x%02x with" - " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - i2c_adapter_id(new_client->adapter), new_client->addr, - company, verstep); - - /* If auto-detecting, Determine the chip type. */ - if (kind <= 0) { - dev_dbg(&new_client->dev, "Autodetecting device at %d,0x%02x " - "...\n", i2c_adapter_id(adapter), address); - if (company == ADM1026_COMPANY_ANALOG_DEV - && verstep == ADM1026_VERSTEP_ADM1026) { - kind = adm1026; - } else if (company == ADM1026_COMPANY_ANALOG_DEV - && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { - dev_err(&adapter->dev, ": Unrecognized stepping " - "0x%02x. Defaulting to ADM1026.\n", verstep); - kind = adm1026; - } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) { - dev_err(&adapter->dev, ": Found version/stepping " - "0x%02x. Assuming generic ADM1026.\n", - verstep); - kind = any_chip; - } else { - dev_dbg(&new_client->dev, ": Autodetection " - "failed\n"); - /* Not an ADM1026 ... */ - if (kind == 0) { /* User used force=x,y */ - dev_err(&adapter->dev, "Generic ADM1026 not " - "found at %d,0x%02x. Try " - "force_adm1026.\n", - i2c_adapter_id(adapter), address); - } - err = 0; - goto exitfree; - } - } - - /* Fill in the chip specific driver values */ - switch (kind) { - case any_chip : - type_name = "adm1026"; - break; - case adm1026 : - type_name = "adm1026"; - break; - default : - dev_err(&adapter->dev, ": Internal error, invalid " - "kind (%d)!", kind); - err = -EFAULT; - goto exitfree; - } - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); - - /* Fill in the remaining client fields */ - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exitfree; - - /* Set the VRM version */ - data->vrm = i2c_which_vrm(); - - /* Initialize the ADM1026 chip */ - adm1026_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in9_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in10_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in11_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in11_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in11_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in12_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in12_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in12_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in13_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in13_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in13_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in14_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in14_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in14_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in15_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in15_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in15_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in16_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in16_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in16_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan4_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan5_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan6_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan7_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan8_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan8_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_offset.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_offset.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_offset.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_auto_point1_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_auto_point1_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_auto_point1_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_auto_point1_temp_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_auto_point1_temp_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_auto_point1_temp_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_auto_point2_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_auto_point2_temp.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_auto_point2_temp.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_crit.dev_attr); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_enable); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_enable); - device_create_file(&new_client->dev, &dev_attr_temp3_crit_enable); - /* vid deprecated in favour of cpu0_vid, remove after 2005-11-11 */ - device_create_file(&new_client->dev, &dev_attr_vid); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_alarm_mask); - device_create_file(&new_client->dev, &dev_attr_gpio); - device_create_file(&new_client->dev, &dev_attr_gpio_mask); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm3); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); - device_create_file(&new_client->dev, &dev_attr_pwm3_enable); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_point1_pwm); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_point1_pwm); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_point1_pwm); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_point2_pwm); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_point2_pwm); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_point2_pwm); - device_create_file(&new_client->dev, &dev_attr_analog_out); - return 0; - - /* Error out and cleanup code */ -exitfree: - kfree(new_client); -exit: - return err; -} -static int __init sm_adm1026_init(void) -{ - return i2c_add_driver(&adm1026_driver); -} - -static void __exit sm_adm1026_exit(void) -{ - i2c_del_driver(&adm1026_driver); -} - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, " - "Justin Thiessen <jthiessen@penguincomputing.com>"); -MODULE_DESCRIPTION("ADM1026 driver"); - -module_init(sm_adm1026_init); -module_exit(sm_adm1026_exit); diff --git a/drivers/i2c/chips/adm1031.c b/drivers/i2c/chips/adm1031.c deleted file mode 100644 index 9168e983ca1d..000000000000 --- a/drivers/i2c/chips/adm1031.c +++ /dev/null @@ -1,977 +0,0 @@ -/* - adm1031.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Based on lm75.c and lm85.c - Supports adm1030 / adm1031 - Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org> - Reworked by Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - -/* Following macros takes channel parameter starting from 0 to 2 */ -#define ADM1031_REG_FAN_SPEED(nr) (0x08 + (nr)) -#define ADM1031_REG_FAN_DIV(nr) (0x20 + (nr)) -#define ADM1031_REG_PWM (0x22) -#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr)) - -#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4*(nr)) -#define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4*(nr)) -#define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4*(nr)) - -#define ADM1031_REG_TEMP(nr) (0xa + (nr)) -#define ADM1031_REG_AUTO_TEMP(nr) (0x24 + (nr)) - -#define ADM1031_REG_STATUS(nr) (0x2 + (nr)) - -#define ADM1031_REG_CONF1 0x0 -#define ADM1031_REG_CONF2 0x1 -#define ADM1031_REG_EXT_TEMP 0x6 - -#define ADM1031_CONF1_MONITOR_ENABLE 0x01 /* Monitoring enable */ -#define ADM1031_CONF1_PWM_INVERT 0x08 /* PWM Invert */ -#define ADM1031_CONF1_AUTO_MODE 0x80 /* Auto FAN */ - -#define ADM1031_CONF2_PWM1_ENABLE 0x01 -#define ADM1031_CONF2_PWM2_ENABLE 0x02 -#define ADM1031_CONF2_TACH1_ENABLE 0x04 -#define ADM1031_CONF2_TACH2_ENABLE 0x08 -#define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan)) - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_2(adm1030, adm1031); - -typedef u8 auto_chan_table_t[8][2]; - -/* Each client has this additional data */ -struct adm1031_data { - struct i2c_client client; - struct semaphore update_lock; - int chip_type; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - /* The chan_select_table contains the possible configurations for - * auto fan control. - */ - auto_chan_table_t *chan_select_table; - u16 alarm; - u8 conf1; - u8 conf2; - u8 fan[2]; - u8 fan_div[2]; - u8 fan_min[2]; - u8 pwm[2]; - u8 old_pwm[2]; - s8 temp[3]; - u8 ext_temp[3]; - u8 auto_temp[3]; - u8 auto_temp_min[3]; - u8 auto_temp_off[3]; - u8 auto_temp_max[3]; - s8 temp_min[3]; - s8 temp_max[3]; - s8 temp_crit[3]; -}; - -static int adm1031_attach_adapter(struct i2c_adapter *adapter); -static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind); -static void adm1031_init_client(struct i2c_client *client); -static int adm1031_detach_client(struct i2c_client *client); -static struct adm1031_data *adm1031_update_device(struct device *dev); - -/* This is the driver that will be inserted */ -static struct i2c_driver adm1031_driver = { - .owner = THIS_MODULE, - .name = "adm1031", - .flags = I2C_DF_NOTIFY, - .attach_adapter = adm1031_attach_adapter, - .detach_client = adm1031_detach_client, -}; - -static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static inline int -adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - - -#define TEMP_TO_REG(val) (((val) < 0 ? ((val - 500) / 1000) : \ - ((val + 500) / 1000))) - -#define TEMP_FROM_REG(val) ((val) * 1000) - -#define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125) - -#define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0) - -static int FAN_TO_REG(int reg, int div) -{ - int tmp; - tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div); - return tmp > 255 ? 255 : tmp; -} - -#define FAN_DIV_FROM_REG(reg) (1<<(((reg)&0xc0)>>6)) - -#define PWM_TO_REG(val) (SENSORS_LIMIT((val), 0, 255) >> 4) -#define PWM_FROM_REG(val) ((val) << 4) - -#define FAN_CHAN_FROM_REG(reg) (((reg) >> 5) & 7) -#define FAN_CHAN_TO_REG(val, reg) \ - (((reg) & 0x1F) | (((val) << 5) & 0xe0)) - -#define AUTO_TEMP_MIN_TO_REG(val, reg) \ - ((((val)/500) & 0xf8)|((reg) & 0x7)) -#define AUTO_TEMP_RANGE_FROM_REG(reg) (5000 * (1<< ((reg)&0x7))) -#define AUTO_TEMP_MIN_FROM_REG(reg) (1000 * ((((reg) >> 3) & 0x1f) << 2)) - -#define AUTO_TEMP_MIN_FROM_REG_DEG(reg) ((((reg) >> 3) & 0x1f) << 2) - -#define AUTO_TEMP_OFF_FROM_REG(reg) \ - (AUTO_TEMP_MIN_FROM_REG(reg) - 5000) - -#define AUTO_TEMP_MAX_FROM_REG(reg) \ - (AUTO_TEMP_RANGE_FROM_REG(reg) + \ - AUTO_TEMP_MIN_FROM_REG(reg)) - -static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm) -{ - int ret; - int range = val - AUTO_TEMP_MIN_FROM_REG(reg); - - range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm); - ret = ((reg & 0xf8) | - (range < 10000 ? 0 : - range < 20000 ? 1 : - range < 40000 ? 2 : range < 80000 ? 3 : 4)); - return ret; -} - -/* FAN auto control */ -#define GET_FAN_AUTO_BITFIELD(data, idx) \ - (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx%2] - -/* The tables below contains the possible values for the auto fan - * control bitfields. the index in the table is the register value. - * MSb is the auto fan control enable bit, so the four first entries - * in the table disables auto fan control when both bitfields are zero. - */ -static auto_chan_table_t auto_channel_select_table_adm1031 = { - {0, 0}, {0, 0}, {0, 0}, {0, 0}, - {2 /*0b010 */ , 4 /*0b100 */ }, - {2 /*0b010 */ , 2 /*0b010 */ }, - {4 /*0b100 */ , 4 /*0b100 */ }, - {7 /*0b111 */ , 7 /*0b111 */ }, -}; - -static auto_chan_table_t auto_channel_select_table_adm1030 = { - {0, 0}, {0, 0}, {0, 0}, {0, 0}, - {2 /*0b10 */ , 0}, - {0xff /*invalid */ , 0}, - {0xff /*invalid */ , 0}, - {3 /*0b11 */ , 0}, -}; - -/* That function checks if a bitfield is valid and returns the other bitfield - * nearest match if no exact match where found. - */ -static int -get_fan_auto_nearest(struct adm1031_data *data, - int chan, u8 val, u8 reg, u8 * new_reg) -{ - int i; - int first_match = -1, exact_match = -1; - u8 other_reg_val = - (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1]; - - if (val == 0) { - *new_reg = 0; - return 0; - } - - for (i = 0; i < 8; i++) { - if ((val == (*data->chan_select_table)[i][chan]) && - ((*data->chan_select_table)[i][chan ? 0 : 1] == - other_reg_val)) { - /* We found an exact match */ - exact_match = i; - break; - } else if (val == (*data->chan_select_table)[i][chan] && - first_match == -1) { - /* Save the first match in case of an exact match has not been - * found - */ - first_match = i; - } - } - - if (exact_match >= 0) { - *new_reg = exact_match; - } else if (first_match >= 0) { - *new_reg = first_match; - } else { - return -EINVAL; - } - return 0; -} - -static ssize_t show_fan_auto_channel(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr)); -} - -static ssize_t -set_fan_auto_channel(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - u8 reg; - int ret; - u8 old_fan_mode; - - old_fan_mode = data->conf1; - - down(&data->update_lock); - - if ((ret = get_fan_auto_nearest(data, nr, val, data->conf1, ®))) { - up(&data->update_lock); - return ret; - } - if (((data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1)) & ADM1031_CONF1_AUTO_MODE) ^ - (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) { - if (data->conf1 & ADM1031_CONF1_AUTO_MODE){ - /* Switch to Auto Fan Mode - * Save PWM registers - * Set PWM registers to 33% Both */ - data->old_pwm[0] = data->pwm[0]; - data->old_pwm[1] = data->pwm[1]; - adm1031_write_value(client, ADM1031_REG_PWM, 0x55); - } else { - /* Switch to Manual Mode */ - data->pwm[0] = data->old_pwm[0]; - data->pwm[1] = data->old_pwm[1]; - /* Restore PWM registers */ - adm1031_write_value(client, ADM1031_REG_PWM, - data->pwm[0] | (data->pwm[1] << 4)); - } - } - data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1); - adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1); - up(&data->update_lock); - return count; -} - -#define fan_auto_channel_offset(offset) \ -static ssize_t show_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_auto_channel(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_auto_channel_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_auto_channel(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(auto_fan##offset##_channel, S_IRUGO | S_IWUSR, \ - show_fan_auto_channel_##offset, \ - set_fan_auto_channel_##offset) - -fan_auto_channel_offset(1); -fan_auto_channel_offset(2); - -/* Auto Temps */ -static ssize_t show_auto_temp_off(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", - AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr])); -} -static ssize_t show_auto_temp_min(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", - AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr])); -} -static ssize_t -set_auto_temp_min(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]); - adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), - data->auto_temp[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_auto_temp_max(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", - AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr])); -} -static ssize_t -set_auto_temp_max(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr], data->pwm[nr]); - adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr), - data->temp_max[nr]); - up(&data->update_lock); - return count; -} - -#define auto_temp_reg(offset) \ -static ssize_t show_auto_temp_##offset##_off (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_auto_temp_off(dev, buf, offset - 1); \ -} \ -static ssize_t show_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_auto_temp_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_auto_temp_max(dev, buf, offset - 1); \ -} \ -static ssize_t set_auto_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_auto_temp_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_auto_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_auto_temp_max(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO, \ - show_auto_temp_##offset##_off, NULL); \ -static DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_auto_temp_##offset##_min, set_auto_temp_##offset##_min);\ -static DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_auto_temp_##offset##_max, set_auto_temp_##offset##_max) - -auto_temp_reg(1); -auto_temp_reg(2); -auto_temp_reg(3); - -/* pwm */ -static ssize_t show_pwm(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); -} -static ssize_t -set_pwm(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - int reg; - - down(&data->update_lock); - if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) && - (((val>>4) & 0xf) != 5)) { - /* In automatic mode, the only PWM accepted is 33% */ - up(&data->update_lock); - return -EINVAL; - } - data->pwm[nr] = PWM_TO_REG(val); - reg = adm1031_read_value(client, ADM1031_REG_PWM); - adm1031_write_value(client, ADM1031_REG_PWM, - nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf) - : (data->pwm[nr] & 0xf) | (reg & 0xf0)); - up(&data->update_lock); - return count; -} - -#define pwm_reg(offset) \ -static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm_##offset, set_pwm_##offset) - -pwm_reg(1); -pwm_reg(2); - -/* Fans */ - -/* - * That function checks the cases where the fan reading is not - * relevant. It is used to provide 0 as fan reading when the fan is - * not supposed to run - */ -static int trust_fan_readings(struct adm1031_data *data, int chan) -{ - int res = 0; - - if (data->conf1 & ADM1031_CONF1_AUTO_MODE) { - switch (data->conf1 & 0x60) { - case 0x00: /* remote temp1 controls fan1 remote temp2 controls fan2 */ - res = data->temp[chan+1] >= - AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]); - break; - case 0x20: /* remote temp1 controls both fans */ - res = - data->temp[1] >= - AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]); - break; - case 0x40: /* remote temp2 controls both fans */ - res = - data->temp[2] >= - AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]); - break; - case 0x60: /* max controls both fans */ - res = - data->temp[0] >= - AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0]) - || data->temp[1] >= - AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]) - || (data->chip_type == adm1031 - && data->temp[2] >= - AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2])); - break; - } - } else { - res = data->pwm[chan] > 0; - } - return res; -} - - -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - int value; - - value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr], - FAN_DIV_FROM_REG(data->fan_div[nr])) : 0; - return sprintf(buf, "%d\n", value); -} - -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr])); -} -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", - FAN_FROM_REG(data->fan_min[nr], - FAN_DIV_FROM_REG(data->fan_div[nr]))); -} -static ssize_t -set_fan_min(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - if (val) { - data->fan_min[nr] = - FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr])); - } else { - data->fan_min[nr] = 0xff; - } - adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t -set_fan_div(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - u8 tmp; - int old_div; - int new_min; - - tmp = val == 8 ? 0xc0 : - val == 4 ? 0x80 : - val == 2 ? 0x40 : - val == 1 ? 0x00 : - 0xff; - if (tmp == 0xff) - return -EINVAL; - - down(&data->update_lock); - old_div = FAN_DIV_FROM_REG(data->fan_div[nr]); - data->fan_div[nr] = (tmp & 0xC0) | (0x3f & data->fan_div[nr]); - new_min = data->fan_min[nr] * old_div / - FAN_DIV_FROM_REG(data->fan_div[nr]); - data->fan_min[nr] = new_min > 0xff ? 0xff : new_min; - data->fan[nr] = data->fan[nr] * old_div / - FAN_DIV_FROM_REG(data->fan_div[nr]); - - adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr), - data->fan_div[nr]); - adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), - data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -#define fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_div(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \ - NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_div, set_fan_##offset##_div); \ -static DEVICE_ATTR(auto_fan##offset##_min_pwm, S_IRUGO | S_IWUSR, \ - show_pwm_##offset, set_pwm_##offset) - -fan_offset(1); -fan_offset(2); - - -/* Temps */ -static ssize_t show_temp(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - int ext; - ext = nr == 0 ? - ((data->ext_temp[nr] >> 6) & 0x3) * 2 : - (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7)); - return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext)); -} -static ssize_t show_temp_min(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); -} -static ssize_t show_temp_max(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); -} -static ssize_t show_temp_crit(struct device *dev, char *buf, int nr) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr])); -} -static ssize_t -set_temp_min(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val; - - val = simple_strtol(buf, NULL, 10); - val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); - down(&data->update_lock); - data->temp_min[nr] = TEMP_TO_REG(val); - adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr), - data->temp_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t -set_temp_max(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val; - - val = simple_strtol(buf, NULL, 10); - val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); - down(&data->update_lock); - data->temp_max[nr] = TEMP_TO_REG(val); - adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr), - data->temp_max[nr]); - up(&data->update_lock); - return count; -} -static ssize_t -set_temp_crit(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int val; - - val = simple_strtol(buf, NULL, 10); - val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875); - down(&data->update_lock); - data->temp_crit[nr] = TEMP_TO_REG(val); - adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr), - data->temp_crit[nr]); - up(&data->update_lock); - return count; -} - -#define temp_reg(offset) \ -static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, offset - 1); \ -} \ -static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_max(dev, buf, offset - 1); \ -} \ -static ssize_t show_temp_##offset##_crit (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_crit(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_max(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_crit (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_crit(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \ - NULL); \ -static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_min, set_temp_##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_max, set_temp_##offset##_max); \ -static DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_crit, set_temp_##offset##_crit) - -temp_reg(1); -temp_reg(2); -temp_reg(3); - -/* Alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm1031_data *data = adm1031_update_device(dev); - return sprintf(buf, "%d\n", data->alarm); -} - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - - -static int adm1031_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, adm1031_detect); -} - -/* This function is called by i2c_detect */ -static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct adm1031_data *data; - int err = 0; - const char *name = ""; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct adm1031_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm1031_driver; - new_client->flags = 0; - - if (kind < 0) { - int id, co; - id = i2c_smbus_read_byte_data(new_client, 0x3d); - co = i2c_smbus_read_byte_data(new_client, 0x3e); - - if (!((id == 0x31 || id == 0x30) && co == 0x41)) - goto exit_free; - kind = (id == 0x30) ? adm1030 : adm1031; - } - - if (kind <= 0) - kind = adm1031; - - /* Given the detected chip type, set the chip name and the - * auto fan control helper table. */ - if (kind == adm1030) { - name = "adm1030"; - data->chan_select_table = &auto_channel_select_table_adm1030; - } else if (kind == adm1031) { - name = "adm1031"; - data->chan_select_table = &auto_channel_select_table_adm1031; - } - data->chip_type = kind; - - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the ADM1031 chip */ - adm1031_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_auto_fan1_channel); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - - device_create_file(&new_client->dev, &dev_attr_auto_temp1_off); - device_create_file(&new_client->dev, &dev_attr_auto_temp1_min); - device_create_file(&new_client->dev, &dev_attr_auto_temp1_max); - - device_create_file(&new_client->dev, &dev_attr_auto_temp2_off); - device_create_file(&new_client->dev, &dev_attr_auto_temp2_min); - device_create_file(&new_client->dev, &dev_attr_auto_temp2_max); - - device_create_file(&new_client->dev, &dev_attr_auto_fan1_min_pwm); - - device_create_file(&new_client->dev, &dev_attr_alarms); - - if (kind == adm1031) { - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, - &dev_attr_auto_fan2_channel); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp3_crit); - device_create_file(&new_client->dev, &dev_attr_auto_temp3_off); - device_create_file(&new_client->dev, &dev_attr_auto_temp3_min); - device_create_file(&new_client->dev, &dev_attr_auto_temp3_max); - device_create_file(&new_client->dev, &dev_attr_auto_fan2_min_pwm); - } - - return 0; - -exit_free: - kfree(new_client); -exit: - return err; -} - -static int adm1031_detach_client(struct i2c_client *client) -{ - int ret; - if ((ret = i2c_detach_client(client)) != 0) { - return ret; - } - kfree(client); - return 0; -} - -static void adm1031_init_client(struct i2c_client *client) -{ - unsigned int read_val; - unsigned int mask; - struct adm1031_data *data = i2c_get_clientdata(client); - - mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE); - if (data->chip_type == adm1031) { - mask |= (ADM1031_CONF2_PWM2_ENABLE | - ADM1031_CONF2_TACH2_ENABLE); - } - /* Initialize the ADM1031 chip (enables fan speed reading ) */ - read_val = adm1031_read_value(client, ADM1031_REG_CONF2); - if ((read_val | mask) != read_val) { - adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask); - } - - read_val = adm1031_read_value(client, ADM1031_REG_CONF1); - if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) { - adm1031_write_value(client, ADM1031_REG_CONF1, read_val | - ADM1031_CONF1_MONITOR_ENABLE); - } - -} - -static struct adm1031_data *adm1031_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1031_data *data = i2c_get_clientdata(client); - int chan; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - dev_dbg(&client->dev, "Starting adm1031 update\n"); - for (chan = 0; - chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) { - u8 oldh, newh; - - oldh = - adm1031_read_value(client, ADM1031_REG_TEMP(chan)); - data->ext_temp[chan] = - adm1031_read_value(client, ADM1031_REG_EXT_TEMP); - newh = - adm1031_read_value(client, ADM1031_REG_TEMP(chan)); - if (newh != oldh) { - data->ext_temp[chan] = - adm1031_read_value(client, - ADM1031_REG_EXT_TEMP); -#ifdef DEBUG - oldh = - adm1031_read_value(client, - ADM1031_REG_TEMP(chan)); - - /* oldh is actually newer */ - if (newh != oldh) - dev_warn(&client->dev, - "Remote temperature may be " - "wrong.\n"); -#endif - } - data->temp[chan] = newh; - - data->temp_min[chan] = - adm1031_read_value(client, - ADM1031_REG_TEMP_MIN(chan)); - data->temp_max[chan] = - adm1031_read_value(client, - ADM1031_REG_TEMP_MAX(chan)); - data->temp_crit[chan] = - adm1031_read_value(client, - ADM1031_REG_TEMP_CRIT(chan)); - data->auto_temp[chan] = - adm1031_read_value(client, - ADM1031_REG_AUTO_TEMP(chan)); - - } - - data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1); - data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2); - - data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0)) - | (adm1031_read_value(client, ADM1031_REG_STATUS(1)) - << 8); - if (data->chip_type == adm1030) { - data->alarm &= 0xc0ff; - } - - for (chan=0; chan<(data->chip_type == adm1030 ? 1 : 2); chan++) { - data->fan_div[chan] = - adm1031_read_value(client, ADM1031_REG_FAN_DIV(chan)); - data->fan_min[chan] = - adm1031_read_value(client, ADM1031_REG_FAN_MIN(chan)); - data->fan[chan] = - adm1031_read_value(client, ADM1031_REG_FAN_SPEED(chan)); - data->pwm[chan] = - 0xf & (adm1031_read_value(client, ADM1031_REG_PWM) >> - (4*chan)); - } - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_adm1031_init(void) -{ - return i2c_add_driver(&adm1031_driver); -} - -static void __exit sensors_adm1031_exit(void) -{ - i2c_del_driver(&adm1031_driver); -} - -MODULE_AUTHOR("Alexandre d'Alton <alex@alexdalton.org>"); -MODULE_DESCRIPTION("ADM1031/ADM1030 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_adm1031_init); -module_exit(sensors_adm1031_exit); diff --git a/drivers/i2c/chips/adm9240.c b/drivers/i2c/chips/adm9240.c deleted file mode 100644 index 5c68e9c311aa..000000000000 --- a/drivers/i2c/chips/adm9240.c +++ /dev/null @@ -1,791 +0,0 @@ -/* - * adm9240.c Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * - * Copyright (C) 1999 Frodo Looijaard <frodol@dds.nl> - * Philip Edelbrock <phil@netroedge.com> - * Copyright (C) 2003 Michiel Rook <michiel@grendelproject.nl> - * Copyright (C) 2005 Grant Coady <gcoady@gmail.com> with valuable - * guidance from Jean Delvare - * - * Driver supports Analog Devices ADM9240 - * Dallas Semiconductor DS1780 - * National Semiconductor LM81 - * - * ADM9240 is the reference, DS1780 and LM81 are register compatibles - * - * Voltage Six inputs are scaled by chip, VID also reported - * Temperature Chip temperature to 0.5'C, maximum and max_hysteris - * Fans 2 fans, low speed alarm, automatic fan clock divider - * Alarms 16-bit map of active alarms - * Analog Out 0..1250 mV output - * - * Chassis Intrusion: clear CI latch with 'echo 1 > chassis_clear' - * - * Test hardware: Intel SE440BX-2 desktop motherboard --Grant - * - * LM81 extended temp reading not implemented - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, - I2C_CLIENT_END }; - -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_3(adm9240, ds1780, lm81); - -/* ADM9240 registers */ -#define ADM9240_REG_MAN_ID 0x3e -#define ADM9240_REG_DIE_REV 0x3f -#define ADM9240_REG_CONFIG 0x40 - -#define ADM9240_REG_IN(nr) (0x20 + (nr)) /* 0..5 */ -#define ADM9240_REG_IN_MAX(nr) (0x2b + (nr) * 2) -#define ADM9240_REG_IN_MIN(nr) (0x2c + (nr) * 2) -#define ADM9240_REG_FAN(nr) (0x28 + (nr)) /* 0..1 */ -#define ADM9240_REG_FAN_MIN(nr) (0x3b + (nr)) -#define ADM9240_REG_INT(nr) (0x41 + (nr)) -#define ADM9240_REG_INT_MASK(nr) (0x43 + (nr)) -#define ADM9240_REG_TEMP 0x27 -#define ADM9240_REG_TEMP_HIGH 0x39 -#define ADM9240_REG_TEMP_HYST 0x3a -#define ADM9240_REG_ANALOG_OUT 0x19 -#define ADM9240_REG_CHASSIS_CLEAR 0x46 -#define ADM9240_REG_VID_FAN_DIV 0x47 -#define ADM9240_REG_I2C_ADDR 0x48 -#define ADM9240_REG_VID4 0x49 -#define ADM9240_REG_TEMP_CONF 0x4b - -/* generalised scaling with integer rounding */ -static inline int SCALE(long val, int mul, int div) -{ - if (val < 0) - return (val * mul - div / 2) / div; - else - return (val * mul + div / 2) / div; -} - -/* adm9240 internally scales voltage measurements */ -static const u16 nom_mv[] = { 2500, 2700, 3300, 5000, 12000, 2700 }; - -static inline unsigned int IN_FROM_REG(u8 reg, int n) -{ - return SCALE(reg, nom_mv[n], 192); -} - -static inline u8 IN_TO_REG(unsigned long val, int n) -{ - return SENSORS_LIMIT(SCALE(val, 192, nom_mv[n]), 0, 255); -} - -/* temperature range: -40..125, 127 disables temperature alarm */ -static inline s8 TEMP_TO_REG(long val) -{ - return SENSORS_LIMIT(SCALE(val, 1, 1000), -40, 127); -} - -/* two fans, each with low fan speed limit */ -static inline unsigned int FAN_FROM_REG(u8 reg, u8 div) -{ - if (!reg) /* error */ - return -1; - - if (reg == 255) - return 0; - - return SCALE(1350000, 1, reg * div); -} - -/* analog out 0..1250mV */ -static inline u8 AOUT_TO_REG(unsigned long val) -{ - return SENSORS_LIMIT(SCALE(val, 255, 1250), 0, 255); -} - -static inline unsigned int AOUT_FROM_REG(u8 reg) -{ - return SCALE(reg, 1250, 255); -} - -static int adm9240_attach_adapter(struct i2c_adapter *adapter); -static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind); -static void adm9240_init_client(struct i2c_client *client); -static int adm9240_detach_client(struct i2c_client *client); -static struct adm9240_data *adm9240_update_device(struct device *dev); - -/* driver data */ -static struct i2c_driver adm9240_driver = { - .owner = THIS_MODULE, - .name = "adm9240", - .id = I2C_DRIVERID_ADM9240, - .flags = I2C_DF_NOTIFY, - .attach_adapter = adm9240_attach_adapter, - .detach_client = adm9240_detach_client, -}; - -/* per client data */ -struct adm9240_data { - enum chips type; - struct i2c_client client; - struct semaphore update_lock; - char valid; - unsigned long last_updated_measure; - unsigned long last_updated_config; - - u8 in[6]; /* ro in0_input */ - u8 in_max[6]; /* rw in0_max */ - u8 in_min[6]; /* rw in0_min */ - u8 fan[2]; /* ro fan1_input */ - u8 fan_min[2]; /* rw fan1_min */ - u8 fan_div[2]; /* rw fan1_div, read-only accessor */ - s16 temp; /* ro temp1_input, 9-bit sign-extended */ - s8 temp_high; /* rw temp1_max */ - s8 temp_hyst; /* rw temp1_max_hyst */ - u16 alarms; /* ro alarms */ - u8 aout; /* rw aout_output */ - u8 vid; /* ro vid */ - u8 vrm; /* -- vrm set on startup, no accessor */ -}; - -/* i2c byte read/write interface */ -static int adm9240_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static int adm9240_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - -/*** sysfs accessors ***/ - -/* temperature */ -#define show_temp(value, scale) \ -static ssize_t show_##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct adm9240_data *data = adm9240_update_device(dev); \ - return sprintf(buf, "%d\n", data->value * scale); \ -} -show_temp(temp_high, 1000); -show_temp(temp_hyst, 1000); -show_temp(temp, 500); /* 0.5'C per bit */ - -#define set_temp(value, reg) \ -static ssize_t set_##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm9240_data *data = adm9240_update_device(dev); \ - long temp = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(temp); \ - adm9240_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} - -set_temp(temp_high, ADM9240_REG_TEMP_HIGH); -set_temp(temp_hyst, ADM9240_REG_TEMP_HYST); - -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_temp_high, set_temp_high); -static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - show_temp_hyst, set_temp_hyst); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); - -/* voltage */ -static ssize_t show_in(struct device *dev, char *buf, int nr) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr], nr)); -} - -static ssize_t show_in_min(struct device *dev, char *buf, int nr) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr], nr)); -} - -static ssize_t show_in_max(struct device *dev, char *buf, int nr) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr], nr)); -} - -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm9240_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val, nr); - adm9240_write_value(client, ADM9240_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm9240_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val, nr); - adm9240_write_value(client, ADM9240_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); - return count; -} - -#define show_in_offset(offset) \ -static ssize_t show_in##offset(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL); \ -static ssize_t show_in##offset##_min(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t show_in##offset##_max(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t \ -set_in##offset##_min(struct device *dev, \ - struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t \ -set_in##offset##_max(struct device *dev, \ - struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); -show_in_offset(5); - -/* fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - 1 << data->fan_div[nr])); -} - -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], - 1 << data->fan_div[nr])); -} - -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", 1 << data->fan_div[nr]); -} - -/* write new fan div, callers must hold data->update_lock */ -static void adm9240_write_fan_div(struct i2c_client *client, int nr, - u8 fan_div) -{ - u8 reg, old, shift = (nr + 2) * 2; - - reg = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); - old = (reg >> shift) & 3; - reg &= ~(3 << shift); - reg |= (fan_div << shift); - adm9240_write_value(client, ADM9240_REG_VID_FAN_DIV, reg); - dev_dbg(&client->dev, "fan%d clock divider changed from %u " - "to %u\n", nr + 1, 1 << old, 1 << fan_div); -} - -/* - * set fan speed low limit: - * - * - value is zero: disable fan speed low limit alarm - * - * - value is below fan speed measurement range: enable fan speed low - * limit alarm to be asserted while fan speed too slow to measure - * - * - otherwise: select fan clock divider to suit fan speed low limit, - * measurement code may adjust registers to ensure fan speed reading - */ -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm9240_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - u8 new_div; - - down(&data->update_lock); - - if (!val) { - data->fan_min[nr] = 255; - new_div = data->fan_div[nr]; - - dev_dbg(&client->dev, "fan%u low limit set disabled\n", - nr + 1); - - } else if (val < 1350000 / (8 * 254)) { - new_div = 3; - data->fan_min[nr] = 254; - - dev_dbg(&client->dev, "fan%u low limit set minimum %u\n", - nr + 1, FAN_FROM_REG(254, 1 << new_div)); - - } else { - unsigned int new_min = 1350000 / val; - - new_div = 0; - while (new_min > 192 && new_div < 3) { - new_div++; - new_min /= 2; - } - if (!new_min) /* keep > 0 */ - new_min++; - - data->fan_min[nr] = new_min; - - dev_dbg(&client->dev, "fan%u low limit set fan speed %u\n", - nr + 1, FAN_FROM_REG(new_min, 1 << new_div)); - } - - if (new_div != data->fan_div[nr]) { - data->fan_div[nr] = new_div; - adm9240_write_fan_div(client, nr, new_div); - } - adm9240_write_value(client, ADM9240_REG_FAN_MIN(nr), - data->fan_min[nr]); - - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ -return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ -return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan_##offset, NULL); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_fan_##offset##_div, NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -show_fan_offset(1); -show_fan_offset(2); - -/* alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* vid */ -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); - -/* analog output */ -static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct adm9240_data *data = adm9240_update_device(dev); - return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); -} - -static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm9240_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->aout = AOUT_TO_REG(val); - adm9240_write_value(client, ADM9240_REG_ANALOG_OUT, data->aout); - up(&data->update_lock); - return count; -} -static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); - -/* chassis_clear */ -static ssize_t chassis_clear(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - unsigned long val = simple_strtol(buf, NULL, 10); - - if (val == 1) { - adm9240_write_value(client, ADM9240_REG_CHASSIS_CLEAR, 0x80); - dev_dbg(&client->dev, "chassis intrusion latch cleared\n"); - } - return count; -} -static DEVICE_ATTR(chassis_clear, S_IWUSR, NULL, chassis_clear); - - -/*** sensor chip detect and driver install ***/ - -static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct adm9240_data *data; - int err = 0; - const char *name = ""; - u8 man_id, die_rev; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct adm9240_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct adm9240_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm9240_driver; - new_client->flags = 0; - - if (kind == 0) { - kind = adm9240; - } - - if (kind < 0) { - - /* verify chip: reg address should match i2c address */ - if (adm9240_read_value(new_client, ADM9240_REG_I2C_ADDR) - != address) { - dev_err(&adapter->dev, "detect fail: address match, " - "0x%02x\n", address); - goto exit_free; - } - - /* check known chip manufacturer */ - man_id = adm9240_read_value(new_client, ADM9240_REG_MAN_ID); - - if (man_id == 0x23) { - kind = adm9240; - } else if (man_id == 0xda) { - kind = ds1780; - } else if (man_id == 0x01) { - kind = lm81; - } else { - dev_err(&adapter->dev, "detect fail: unknown manuf, " - "0x%02x\n", man_id); - goto exit_free; - } - - /* successful detect, print chip info */ - die_rev = adm9240_read_value(new_client, ADM9240_REG_DIE_REV); - dev_info(&adapter->dev, "found %s revision %u\n", - man_id == 0x23 ? "ADM9240" : - man_id == 0xda ? "DS1780" : "LM81", die_rev); - } - - /* either forced or detected chip kind */ - if (kind == adm9240) { - name = "adm9240"; - } else if (kind == ds1780) { - name = "ds1780"; - } else if (kind == lm81) { - name = "lm81"; - } - - /* fill in the remaining client fields and attach */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->type = kind; - init_MUTEX(&data->update_lock); - - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - adm9240_init_client(new_client); - - /* populate sysfs filesystem */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_aout_output); - device_create_file(&new_client->dev, &dev_attr_chassis_clear); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - - return 0; -exit_free: - kfree(new_client); -exit: - return err; -} - -static int adm9240_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, adm9240_detect); -} - -static int adm9240_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static void adm9240_init_client(struct i2c_client *client) -{ - struct adm9240_data *data = i2c_get_clientdata(client); - u8 conf = adm9240_read_value(client, ADM9240_REG_CONFIG); - u8 mode = adm9240_read_value(client, ADM9240_REG_TEMP_CONF) & 3; - - data->vrm = i2c_which_vrm(); /* need this to report vid as mV */ - - dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10, - data->vrm % 10); - - if (conf & 1) { /* measurement cycle running: report state */ - - dev_info(&client->dev, "status: config 0x%02x mode %u\n", - conf, mode); - - } else { /* cold start: open limits before starting chip */ - int i; - - for (i = 0; i < 6; i++) - { - adm9240_write_value(client, - ADM9240_REG_IN_MIN(i), 0); - adm9240_write_value(client, - ADM9240_REG_IN_MAX(i), 255); - } - adm9240_write_value(client, ADM9240_REG_FAN_MIN(0), 255); - adm9240_write_value(client, ADM9240_REG_FAN_MIN(1), 255); - adm9240_write_value(client, ADM9240_REG_TEMP_HIGH, 127); - adm9240_write_value(client, ADM9240_REG_TEMP_HYST, 127); - - /* start measurement cycle */ - adm9240_write_value(client, ADM9240_REG_CONFIG, 1); - - dev_info(&client->dev, "cold start: config was 0x%02x " - "mode %u\n", conf, mode); - } -} - -static struct adm9240_data *adm9240_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm9240_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - /* minimum measurement cycle: 1.75 seconds */ - if (time_after(jiffies, data->last_updated_measure + (HZ * 7 / 4)) - || !data->valid) { - - for (i = 0; i < 6; i++) /* read voltages */ - { - data->in[i] = adm9240_read_value(client, - ADM9240_REG_IN(i)); - } - data->alarms = adm9240_read_value(client, - ADM9240_REG_INT(0)) | - adm9240_read_value(client, - ADM9240_REG_INT(1)) << 8; - - /* read temperature: assume temperature changes less than - * 0.5'C per two measurement cycles thus ignore possible - * but unlikely aliasing error on lsb reading. --Grant */ - data->temp = ((adm9240_read_value(client, - ADM9240_REG_TEMP) << 8) | - adm9240_read_value(client, - ADM9240_REG_TEMP_CONF)) / 128; - - for (i = 0; i < 2; i++) /* read fans */ - { - data->fan[i] = adm9240_read_value(client, - ADM9240_REG_FAN(i)); - - /* adjust fan clock divider on overflow */ - if (data->valid && data->fan[i] == 255 && - data->fan_div[i] < 3) { - - adm9240_write_fan_div(client, i, - ++data->fan_div[i]); - - /* adjust fan_min if active, but not to 0 */ - if (data->fan_min[i] < 255 && - data->fan_min[i] >= 2) - data->fan_min[i] /= 2; - } - } - data->last_updated_measure = jiffies; - } - - /* minimum config reading cycle: 300 seconds */ - if (time_after(jiffies, data->last_updated_config + (HZ * 300)) - || !data->valid) { - - for (i = 0; i < 6; i++) - { - data->in_min[i] = adm9240_read_value(client, - ADM9240_REG_IN_MIN(i)); - data->in_max[i] = adm9240_read_value(client, - ADM9240_REG_IN_MAX(i)); - } - for (i = 0; i < 2; i++) - { - data->fan_min[i] = adm9240_read_value(client, - ADM9240_REG_FAN_MIN(i)); - } - data->temp_high = adm9240_read_value(client, - ADM9240_REG_TEMP_HIGH); - data->temp_hyst = adm9240_read_value(client, - ADM9240_REG_TEMP_HYST); - - /* read fan divs and 5-bit VID */ - i = adm9240_read_value(client, ADM9240_REG_VID_FAN_DIV); - data->fan_div[0] = (i >> 4) & 3; - data->fan_div[1] = (i >> 6) & 3; - data->vid = i & 0x0f; - data->vid |= (adm9240_read_value(client, - ADM9240_REG_VID4) & 1) << 4; - /* read analog out */ - data->aout = adm9240_read_value(client, - ADM9240_REG_ANALOG_OUT); - - data->last_updated_config = jiffies; - data->valid = 1; - } - up(&data->update_lock); - return data; -} - -static int __init sensors_adm9240_init(void) -{ - return i2c_add_driver(&adm9240_driver); -} - -static void __exit sensors_adm9240_exit(void) -{ - i2c_del_driver(&adm9240_driver); -} - -MODULE_AUTHOR("Michiel Rook <michiel@grendelproject.nl>, " - "Grant Coady <gcoady@gmail.com> and others"); -MODULE_DESCRIPTION("ADM9240/DS1780/LM81 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_adm9240_init); -module_exit(sensors_adm9240_exit); - diff --git a/drivers/i2c/chips/asb100.c b/drivers/i2c/chips/asb100.c deleted file mode 100644 index 70d996d6fe0a..000000000000 --- a/drivers/i2c/chips/asb100.c +++ /dev/null @@ -1,1065 +0,0 @@ -/* - asb100.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - - Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com> - - (derived from w83781d.c) - - Copyright (C) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, and - Mark Studebaker <mdsxyz123@yahoo.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - This driver supports the hardware sensor chips: Asus ASB100 and - ASB100-A "BACH". - - ASB100-A supports pwm1, while plain ASB100 does not. There is no known - way for the driver to tell which one is there. - - Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA - asb100 7 3 1 4 0x31 0x0694 yes no -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> -#include <linux/init.h> -#include <linux/jiffies.h> -#include "lm75.h" - -/* - HISTORY: - 2003-12-29 1.0.0 Ported from lm_sensors project for kernel 2.6 -*/ -#define ASB100_VERSION "1.0.0" - -/* I2C addresses to scan */ -static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END }; - -/* ISA addresses to scan (none) */ -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(asb100); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " - "{bus, clientaddr, subclientaddr1, subclientaddr2}"); - -/* Voltage IN registers 0-6 */ -#define ASB100_REG_IN(nr) (0x20 + (nr)) -#define ASB100_REG_IN_MAX(nr) (0x2b + (nr * 2)) -#define ASB100_REG_IN_MIN(nr) (0x2c + (nr * 2)) - -/* FAN IN registers 1-3 */ -#define ASB100_REG_FAN(nr) (0x28 + (nr)) -#define ASB100_REG_FAN_MIN(nr) (0x3b + (nr)) - -/* TEMPERATURE registers 1-4 */ -static const u16 asb100_reg_temp[] = {0, 0x27, 0x150, 0x250, 0x17}; -static const u16 asb100_reg_temp_max[] = {0, 0x39, 0x155, 0x255, 0x18}; -static const u16 asb100_reg_temp_hyst[] = {0, 0x3a, 0x153, 0x253, 0x19}; - -#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr]) -#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr]) -#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr]) - -#define ASB100_REG_TEMP2_CONFIG 0x0152 -#define ASB100_REG_TEMP3_CONFIG 0x0252 - - -#define ASB100_REG_CONFIG 0x40 -#define ASB100_REG_ALARM1 0x41 -#define ASB100_REG_ALARM2 0x42 -#define ASB100_REG_SMIM1 0x43 -#define ASB100_REG_SMIM2 0x44 -#define ASB100_REG_VID_FANDIV 0x47 -#define ASB100_REG_I2C_ADDR 0x48 -#define ASB100_REG_CHIPID 0x49 -#define ASB100_REG_I2C_SUBADDR 0x4a -#define ASB100_REG_PIN 0x4b -#define ASB100_REG_IRQ 0x4c -#define ASB100_REG_BANK 0x4e -#define ASB100_REG_CHIPMAN 0x4f - -#define ASB100_REG_WCHIPID 0x58 - -/* bit 7 -> enable, bits 0-3 -> duty cycle */ -#define ASB100_REG_PWM1 0x59 - -/* CONVERSIONS - Rounding and limit checking is only done on the TO_REG variants. */ - -/* These constants are a guess, consistent w/ w83781d */ -#define ASB100_IN_MIN ( 0) -#define ASB100_IN_MAX (4080) - -/* IN: 1/1000 V (0V to 4.08V) - REG: 16mV/bit */ -static u8 IN_TO_REG(unsigned val) -{ - unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX); - return (nval + 8) / 16; -} - -static unsigned IN_FROM_REG(u8 reg) -{ - return reg * 16; -} - -static u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm == -1) - return 0; - if (rpm == 0) - return 255; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); -} - -static int FAN_FROM_REG(u8 val, int div) -{ - return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); -} - -/* These constants are a guess, consistent w/ w83781d */ -#define ASB100_TEMP_MIN (-128000) -#define ASB100_TEMP_MAX ( 127000) - -/* TEMP: 0.001C/bit (-128C to +127C) - REG: 1C/bit, two's complement */ -static u8 TEMP_TO_REG(int temp) -{ - int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX); - ntemp += (ntemp<0 ? -500 : 500); - return (u8)(ntemp / 1000); -} - -static int TEMP_FROM_REG(u8 reg) -{ - return (s8)reg * 1000; -} - -/* PWM: 0 - 255 per sensors documentation - REG: (6.25% duty cycle per bit) */ -static u8 ASB100_PWM_TO_REG(int pwm) -{ - pwm = SENSORS_LIMIT(pwm, 0, 255); - return (u8)(pwm / 16); -} - -static int ASB100_PWM_FROM_REG(u8 reg) -{ - return reg * 16; -} - -#define DIV_FROM_REG(val) (1 << (val)) - -/* FAN DIV: 1, 2, 4, or 8 (defaults to 2) - REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */ -static u8 DIV_TO_REG(long val) -{ - return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1; -} - -/* For each registered client, we need to keep some data in memory. That - data is pointed to by client->data. The structure itself is - dynamically allocated, at the same time the client itself is allocated. */ -struct asb100_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - unsigned long last_updated; /* In jiffies */ - - /* array of 2 pointers to subclients */ - struct i2c_client *lm75[2]; - - char valid; /* !=0 if following fields are valid */ - u8 in[7]; /* Register value */ - u8 in_max[7]; /* Register value */ - u8 in_min[7]; /* Register value */ - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ - u16 temp[4]; /* Register value (0 and 3 are u8 only) */ - u16 temp_max[4]; /* Register value (0 and 3 are u8 only) */ - u16 temp_hyst[4]; /* Register value (0 and 3 are u8 only) */ - u8 fan_div[3]; /* Register encoding, right justified */ - u8 pwm; /* Register encoding */ - u8 vid; /* Register encoding, combined */ - u32 alarms; /* Register encoding, combined */ - u8 vrm; -}; - -static int asb100_read_value(struct i2c_client *client, u16 reg); -static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val); - -static int asb100_attach_adapter(struct i2c_adapter *adapter); -static int asb100_detect(struct i2c_adapter *adapter, int address, int kind); -static int asb100_detach_client(struct i2c_client *client); -static struct asb100_data *asb100_update_device(struct device *dev); -static void asb100_init_client(struct i2c_client *client); - -static struct i2c_driver asb100_driver = { - .owner = THIS_MODULE, - .name = "asb100", - .id = I2C_DRIVERID_ASB100, - .flags = I2C_DF_NOTIFY, - .attach_adapter = asb100_attach_adapter, - .detach_client = asb100_detach_client, -}; - -/* 7 Voltages */ -#define show_in_reg(reg) \ -static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct asb100_data *data = asb100_update_device(dev); \ - return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \ -} - -show_in_reg(in) -show_in_reg(in_min) -show_in_reg(in_max) - -#define set_in_reg(REG, reg) \ -static ssize_t set_in_##reg(struct device *dev, const char *buf, \ - size_t count, int nr) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct asb100_data *data = i2c_get_clientdata(client); \ - unsigned long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_##reg[nr] = IN_TO_REG(val); \ - asb100_write_value(client, ASB100_REG_IN_##REG(nr), \ - data->in_##reg[nr]); \ - up(&data->update_lock); \ - return count; \ -} - -set_in_reg(MIN, min) -set_in_reg(MAX, max) - -#define sysfs_in(offset) \ -static ssize_t \ - show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in##offset, NULL); \ -static ssize_t \ - show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t \ - show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -sysfs_in(0); -sysfs_in(1); -sysfs_in(2); -sysfs_in(3); -sysfs_in(4); -sysfs_in(5); -sysfs_in(6); - -#define device_create_file_in(client, offset) do { \ - device_create_file(&client->dev, &dev_attr_in##offset##_input); \ - device_create_file(&client->dev, &dev_attr_in##offset##_min); \ - device_create_file(&client->dev, &dev_attr_in##offset##_max); \ -} while (0) - -/* 3 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr]))); -} - -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr]))); -} - -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); -} - -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct asb100_data *data = i2c_get_clientdata(client); - u32 val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct asb100_data *data = i2c_get_clientdata(client); - unsigned long min; - unsigned long val = simple_strtoul(buf, NULL, 10); - int reg; - - down(&data->update_lock); - - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - data->fan_div[nr] = DIV_TO_REG(val); - - switch(nr) { - case 0: /* fan 1 */ - reg = asb100_read_value(client, ASB100_REG_VID_FANDIV); - reg = (reg & 0xcf) | (data->fan_div[0] << 4); - asb100_write_value(client, ASB100_REG_VID_FANDIV, reg); - break; - - case 1: /* fan 2 */ - reg = asb100_read_value(client, ASB100_REG_VID_FANDIV); - reg = (reg & 0x3f) | (data->fan_div[1] << 6); - asb100_write_value(client, ASB100_REG_VID_FANDIV, reg); - break; - - case 2: /* fan 3 */ - reg = asb100_read_value(client, ASB100_REG_PIN); - reg = (reg & 0x3f) | (data->fan_div[2] << 6); - asb100_write_value(client, ASB100_REG_PIN, reg); - break; - } - - data->fan_min[nr] = - FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]); - - up(&data->update_lock); - - return count; -} - -#define sysfs_fan(offset) \ -static ssize_t show_fan##offset(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_fan_div(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan##offset, NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan##offset##_min, set_fan##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan##offset##_div, set_fan##offset##_div); - -sysfs_fan(1); -sysfs_fan(2); -sysfs_fan(3); - -#define device_create_file_fan(client, offset) do { \ - device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ -} while (0) - -/* 4 Temp. Sensors */ -static int sprintf_temp_from_reg(u16 reg, char *buf, int nr) -{ - int ret = 0; - - switch (nr) { - case 1: case 2: - ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg)); - break; - case 0: case 3: default: - ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg)); - break; - } - return ret; -} - -#define show_temp_reg(reg) \ -static ssize_t show_##reg(struct device *dev, char *buf, int nr) \ -{ \ - struct asb100_data *data = asb100_update_device(dev); \ - return sprintf_temp_from_reg(data->reg[nr], buf, nr); \ -} - -show_temp_reg(temp); -show_temp_reg(temp_max); -show_temp_reg(temp_hyst); - -#define set_temp_reg(REG, reg) \ -static ssize_t set_##reg(struct device *dev, const char *buf, \ - size_t count, int nr) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct asb100_data *data = i2c_get_clientdata(client); \ - unsigned long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - switch (nr) { \ - case 1: case 2: \ - data->reg[nr] = LM75_TEMP_TO_REG(val); \ - break; \ - case 0: case 3: default: \ - data->reg[nr] = TEMP_TO_REG(val); \ - break; \ - } \ - asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \ - data->reg[nr]); \ - up(&data->update_lock); \ - return count; \ -} - -set_temp_reg(MAX, temp_max); -set_temp_reg(HYST, temp_hyst); - -#define sysfs_temp(num) \ -static ssize_t show_temp##num(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, num-1); \ -} \ -static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL); \ -static ssize_t show_temp_max##num(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_max(dev, buf, num-1); \ -} \ -static ssize_t set_temp_max##num(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_temp_max(dev, buf, count, num-1); \ -} \ -static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \ - show_temp_max##num, set_temp_max##num); \ -static ssize_t show_temp_hyst##num(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_hyst(dev, buf, num-1); \ -} \ -static ssize_t set_temp_hyst##num(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_temp_hyst(dev, buf, count, num-1); \ -} \ -static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \ - show_temp_hyst##num, set_temp_hyst##num); - -sysfs_temp(1); -sysfs_temp(2); -sysfs_temp(3); -sysfs_temp(4); - -/* VID */ -#define device_create_file_temp(client, num) do { \ - device_create_file(&client->dev, &dev_attr_temp##num##_input); \ - device_create_file(&client->dev, &dev_attr_temp##num##_max); \ - device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \ -} while (0) - -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); -} - -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid) - -/* VRM */ -static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%d\n", data->vrm); -} - -static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct asb100_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - data->vrm = val; - return count; -} - -/* Alarms */ -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm); - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -#define device_create_file_alarms(client) \ -device_create_file(&client->dev, &dev_attr_alarms) - -/* 1 PWM */ -static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f)); -} - -static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct asb100_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->pwm &= 0x80; /* keep the enable bit */ - data->pwm |= (0x0f & ASB100_PWM_TO_REG(val)); - asb100_write_value(client, ASB100_REG_PWM1, data->pwm); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm_enable1(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct asb100_data *data = asb100_update_device(dev); - return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0); -} - -static ssize_t set_pwm_enable1(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct asb100_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->pwm &= 0x0f; /* keep the duty cycle bits */ - data->pwm |= (val ? 0x80 : 0x00); - asb100_write_value(client, ASB100_REG_PWM1, data->pwm); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1); -static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR, - show_pwm_enable1, set_pwm_enable1); -#define device_create_file_pwm1(client) do { \ - device_create_file(&new_client->dev, &dev_attr_pwm1); \ - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \ -} while (0) - -/* This function is called when: - asb100_driver is inserted (when this module is loaded), for each - available adapter - when a new adapter is inserted (and asb100_driver is still present) - */ -static int asb100_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, asb100_detect); -} - -static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *new_client) -{ - int i, id, err; - struct asb100_data *data = i2c_get_clientdata(new_client); - - data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[0])) { - err = -ENOMEM; - goto ERROR_SC_0; - } - memset(data->lm75[0], 0x00, sizeof(struct i2c_client)); - - data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[1])) { - err = -ENOMEM; - goto ERROR_SC_1; - } - memset(data->lm75[1], 0x00, sizeof(struct i2c_client)); - - id = i2c_adapter_id(adapter); - - if (force_subclients[0] == id && force_subclients[1] == address) { - for (i = 2; i <= 3; i++) { - if (force_subclients[i] < 0x48 || - force_subclients[i] > 0x4f) { - dev_err(&new_client->dev, "invalid subclient " - "address %d; must be 0x48-0x4f\n", - force_subclients[i]); - err = -ENODEV; - goto ERROR_SC_2; - } - } - asb100_write_value(new_client, ASB100_REG_I2C_SUBADDR, - (force_subclients[2] & 0x07) | - ((force_subclients[3] & 0x07) <<4)); - data->lm75[0]->addr = force_subclients[2]; - data->lm75[1]->addr = force_subclients[3]; - } else { - int val = asb100_read_value(new_client, ASB100_REG_I2C_SUBADDR); - data->lm75[0]->addr = 0x48 + (val & 0x07); - data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07); - } - - if(data->lm75[0]->addr == data->lm75[1]->addr) { - dev_err(&new_client->dev, "duplicate addresses 0x%x " - "for subclients\n", data->lm75[0]->addr); - err = -ENODEV; - goto ERROR_SC_2; - } - - for (i = 0; i <= 1; i++) { - i2c_set_clientdata(data->lm75[i], NULL); - data->lm75[i]->adapter = adapter; - data->lm75[i]->driver = &asb100_driver; - data->lm75[i]->flags = 0; - strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE); - } - - if ((err = i2c_attach_client(data->lm75[0]))) { - dev_err(&new_client->dev, "subclient %d registration " - "at address 0x%x failed.\n", i, data->lm75[0]->addr); - goto ERROR_SC_2; - } - - if ((err = i2c_attach_client(data->lm75[1]))) { - dev_err(&new_client->dev, "subclient %d registration " - "at address 0x%x failed.\n", i, data->lm75[1]->addr); - goto ERROR_SC_3; - } - - return 0; - -/* Undo inits in case of errors */ -ERROR_SC_3: - i2c_detach_client(data->lm75[0]); -ERROR_SC_2: - kfree(data->lm75[1]); -ERROR_SC_1: - kfree(data->lm75[0]); -ERROR_SC_0: - return err; -} - -static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int err; - struct i2c_client *new_client; - struct asb100_data *data; - - /* asb100 is SMBus only */ - if (i2c_is_isa_adapter(adapter)) { - pr_debug("asb100.o: detect failed, " - "cannot attach to legacy adapter!\n"); - err = -ENODEV; - goto ERROR0; - } - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - pr_debug("asb100.o: detect failed, " - "smbus byte data not supported!\n"); - err = -ENODEV; - goto ERROR0; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access asb100_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) { - pr_debug("asb100.o: detect failed, kmalloc failed!\n"); - err = -ENOMEM; - goto ERROR0; - } - memset(data, 0, sizeof(struct asb100_data)); - - new_client = &data->client; - init_MUTEX(&data->lock); - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &asb100_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - /* The chip may be stuck in some other bank than bank 0. This may - make reading other information impossible. Specify a force=... or - force_*=... parameter, and the chip will be reset to the right - bank. */ - if (kind < 0) { - - int val1 = asb100_read_value(new_client, ASB100_REG_BANK); - int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN); - - /* If we're in bank 0 */ - if ( (!(val1 & 0x07)) && - /* Check for ASB100 ID (low byte) */ - ( ((!(val1 & 0x80)) && (val2 != 0x94)) || - /* Check for ASB100 ID (high byte ) */ - ((val1 & 0x80) && (val2 != 0x06)) ) ) { - pr_debug("asb100.o: detect failed, " - "bad chip id 0x%02x!\n", val2); - err = -ENODEV; - goto ERROR1; - } - - } /* kind < 0 */ - - /* We have either had a force parameter, or we have already detected - Winbond. Put it now into bank 0 and Vendor ID High Byte */ - asb100_write_value(new_client, ASB100_REG_BANK, - (asb100_read_value(new_client, ASB100_REG_BANK) & 0x78) | 0x80); - - /* Determine the chip type. */ - if (kind <= 0) { - int val1 = asb100_read_value(new_client, ASB100_REG_WCHIPID); - int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN); - - if ((val1 == 0x31) && (val2 == 0x06)) - kind = asb100; - else { - if (kind == 0) - dev_warn(&new_client->dev, "ignoring " - "'force' parameter for unknown chip " - "at adapter %d, address 0x%02x.\n", - i2c_adapter_id(adapter), address); - err = -ENODEV; - goto ERROR1; - } - } - - /* Fill in remaining client fields and put it into the global list */ - strlcpy(new_client->name, "asb100", I2C_NAME_SIZE); - data->type = kind; - - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR1; - - /* Attach secondary lm75 clients */ - if ((err = asb100_detect_subclients(adapter, address, kind, - new_client))) - goto ERROR2; - - /* Initialize the chip */ - asb100_init_client(new_client); - - /* A few vars need to be filled upon startup */ - data->fan_min[0] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(0)); - data->fan_min[1] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(1)); - data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2)); - - /* Register sysfs hooks */ - device_create_file_in(new_client, 0); - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - device_create_file_in(new_client, 4); - device_create_file_in(new_client, 5); - device_create_file_in(new_client, 6); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - device_create_file_temp(new_client, 3); - device_create_file_temp(new_client, 4); - - device_create_file_vid(new_client); - device_create_file_vrm(new_client); - - device_create_file_alarms(new_client); - - device_create_file_pwm1(new_client); - - return 0; - -ERROR2: - i2c_detach_client(new_client); -ERROR1: - kfree(data); -ERROR0: - return err; -} - -static int asb100_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "client deregistration failed; " - "client not detached.\n"); - return err; - } - - if (i2c_get_clientdata(client)==NULL) { - /* subclients */ - kfree(client); - } else { - /* main client */ - kfree(i2c_get_clientdata(client)); - } - - return 0; -} - -/* The SMBus locks itself, usually, but nothing may access the chip between - bank switches. */ -static int asb100_read_value(struct i2c_client *client, u16 reg) -{ - struct asb100_data *data = i2c_get_clientdata(client); - struct i2c_client *cl; - int res, bank; - - down(&data->lock); - - bank = (reg >> 8) & 0x0f; - if (bank > 2) - /* switch banks */ - i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank); - - if (bank == 0 || bank > 2) { - res = i2c_smbus_read_byte_data(client, reg & 0xff); - } else { - /* switch to subclient */ - cl = data->lm75[bank - 1]; - - /* convert from ISA to LM75 I2C addresses */ - switch (reg & 0xff) { - case 0x50: /* TEMP */ - res = swab16(i2c_smbus_read_word_data (cl, 0)); - break; - case 0x52: /* CONFIG */ - res = i2c_smbus_read_byte_data(cl, 1); - break; - case 0x53: /* HYST */ - res = swab16(i2c_smbus_read_word_data (cl, 2)); - break; - case 0x55: /* MAX */ - default: - res = swab16(i2c_smbus_read_word_data (cl, 3)); - break; - } - } - - if (bank > 2) - i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); - - up(&data->lock); - - return res; -} - -static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value) -{ - struct asb100_data *data = i2c_get_clientdata(client); - struct i2c_client *cl; - int bank; - - down(&data->lock); - - bank = (reg >> 8) & 0x0f; - if (bank > 2) - /* switch banks */ - i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank); - - if (bank == 0 || bank > 2) { - i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff); - } else { - /* switch to subclient */ - cl = data->lm75[bank - 1]; - - /* convert from ISA to LM75 I2C addresses */ - switch (reg & 0xff) { - case 0x52: /* CONFIG */ - i2c_smbus_write_byte_data(cl, 1, value & 0xff); - break; - case 0x53: /* HYST */ - i2c_smbus_write_word_data(cl, 2, swab16(value)); - break; - case 0x55: /* MAX */ - i2c_smbus_write_word_data(cl, 3, swab16(value)); - break; - } - } - - if (bank > 2) - i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0); - - up(&data->lock); -} - -static void asb100_init_client(struct i2c_client *client) -{ - struct asb100_data *data = i2c_get_clientdata(client); - int vid = 0; - - vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f; - vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4; - data->vrm = i2c_which_vrm(); - vid = vid_from_reg(vid, data->vrm); - - /* Start monitoring */ - asb100_write_value(client, ASB100_REG_CONFIG, - (asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01); -} - -static struct asb100_data *asb100_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct asb100_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - dev_dbg(&client->dev, "starting device update...\n"); - - /* 7 voltage inputs */ - for (i = 0; i < 7; i++) { - data->in[i] = asb100_read_value(client, - ASB100_REG_IN(i)); - data->in_min[i] = asb100_read_value(client, - ASB100_REG_IN_MIN(i)); - data->in_max[i] = asb100_read_value(client, - ASB100_REG_IN_MAX(i)); - } - - /* 3 fan inputs */ - for (i = 0; i < 3; i++) { - data->fan[i] = asb100_read_value(client, - ASB100_REG_FAN(i)); - data->fan_min[i] = asb100_read_value(client, - ASB100_REG_FAN_MIN(i)); - } - - /* 4 temperature inputs */ - for (i = 1; i <= 4; i++) { - data->temp[i-1] = asb100_read_value(client, - ASB100_REG_TEMP(i)); - data->temp_max[i-1] = asb100_read_value(client, - ASB100_REG_TEMP_MAX(i)); - data->temp_hyst[i-1] = asb100_read_value(client, - ASB100_REG_TEMP_HYST(i)); - } - - /* VID and fan divisors */ - i = asb100_read_value(client, ASB100_REG_VID_FANDIV); - data->vid = i & 0x0f; - data->vid |= (asb100_read_value(client, - ASB100_REG_CHIPID) & 0x01) << 4; - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = (i >> 6) & 0x03; - data->fan_div[2] = (asb100_read_value(client, - ASB100_REG_PIN) >> 6) & 0x03; - - /* PWM */ - data->pwm = asb100_read_value(client, ASB100_REG_PWM1); - - /* alarms */ - data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) + - (asb100_read_value(client, ASB100_REG_ALARM2) << 8); - - data->last_updated = jiffies; - data->valid = 1; - - dev_dbg(&client->dev, "... device update complete\n"); - } - - up(&data->update_lock); - - return data; -} - -static int __init asb100_init(void) -{ - return i2c_add_driver(&asb100_driver); -} - -static void __exit asb100_exit(void) -{ - i2c_del_driver(&asb100_driver); -} - -MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); -MODULE_DESCRIPTION("ASB100 Bach driver"); -MODULE_LICENSE("GPL"); - -module_init(asb100_init); -module_exit(asb100_exit); - diff --git a/drivers/i2c/chips/atxp1.c b/drivers/i2c/chips/atxp1.c deleted file mode 100644 index 0bcf82b4c07b..000000000000 --- a/drivers/i2c/chips/atxp1.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - atxp1.c - kernel module for setting CPU VID and general purpose - I/Os using the Attansic ATXP1 chip. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("System voltages control via Attansic ATXP1"); -MODULE_VERSION("0.6.2"); -MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>"); - -#define ATXP1_VID 0x00 -#define ATXP1_CVID 0x01 -#define ATXP1_GPIO1 0x06 -#define ATXP1_GPIO2 0x0a -#define ATXP1_VIDENA 0x20 -#define ATXP1_VIDMASK 0x1f -#define ATXP1_GPIO1MASK 0x0f - -static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -SENSORS_INSMOD_1(atxp1); - -static int atxp1_attach_adapter(struct i2c_adapter * adapter); -static int atxp1_detach_client(struct i2c_client * client); -static struct atxp1_data * atxp1_update_device(struct device *dev); -static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind); - -static struct i2c_driver atxp1_driver = { - .owner = THIS_MODULE, - .name = "atxp1", - .flags = I2C_DF_NOTIFY, - .attach_adapter = atxp1_attach_adapter, - .detach_client = atxp1_detach_client, -}; - -struct atxp1_data { - struct i2c_client client; - struct semaphore update_lock; - unsigned long last_updated; - u8 valid; - struct { - u8 vid; /* VID output register */ - u8 cpu_vid; /* VID input from CPU */ - u8 gpio1; /* General purpose I/O register 1 */ - u8 gpio2; /* General purpose I/O register 2 */ - } reg; - u8 vrm; /* Detected CPU VRM */ -}; - -static struct atxp1_data * atxp1_update_device(struct device *dev) -{ - struct i2c_client *client; - struct atxp1_data *data; - - client = to_i2c_client(dev); - data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if ((jiffies - data->last_updated > HZ) || - (jiffies < data->last_updated) || - !data->valid) { - - /* Update local register data */ - data->reg.vid = i2c_smbus_read_byte_data(client, ATXP1_VID); - data->reg.cpu_vid = i2c_smbus_read_byte_data(client, ATXP1_CVID); - data->reg.gpio1 = i2c_smbus_read_byte_data(client, ATXP1_GPIO1); - data->reg.gpio2 = i2c_smbus_read_byte_data(client, ATXP1_GPIO2); - - data->valid = 1; - } - - up(&data->update_lock); - - return(data); -} - -/* sys file functions for cpu0_vid */ -static ssize_t atxp1_showvcore(struct device *dev, struct device_attribute *attr, char *buf) -{ - int size; - struct atxp1_data *data; - - data = atxp1_update_device(dev); - - size = sprintf(buf, "%d\n", vid_from_reg(data->reg.vid & ATXP1_VIDMASK, data->vrm)); - - return size; -} - -static ssize_t atxp1_storevcore(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct atxp1_data *data; - struct i2c_client *client; - char vid; - char cvid; - unsigned int vcore; - - client = to_i2c_client(dev); - data = atxp1_update_device(dev); - - vcore = simple_strtoul(buf, NULL, 10); - vcore /= 25; - vcore *= 25; - - /* Calculate VID */ - vid = vid_to_reg(vcore, data->vrm); - - if (vid < 0) { - dev_err(dev, "VID calculation failed.\n"); - return -1; - } - - /* If output enabled, use control register value. Otherwise original CPU VID */ - if (data->reg.vid & ATXP1_VIDENA) - cvid = data->reg.vid & ATXP1_VIDMASK; - else - cvid = data->reg.cpu_vid; - - /* Nothing changed, aborting */ - if (vid == cvid) - return count; - - dev_dbg(dev, "Setting VCore to %d mV (0x%02x)\n", vcore, vid); - - /* Write every 25 mV step to increase stability */ - if (cvid > vid) { - for (; cvid >= vid; cvid--) { - i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA); - } - } - else { - for (; cvid <= vid; cvid++) { - i2c_smbus_write_byte_data(client, ATXP1_VID, cvid | ATXP1_VIDENA); - } - } - - data->valid = 0; - - return count; -} - -/* CPU core reference voltage - unit: millivolt -*/ -static DEVICE_ATTR(cpu0_vid, S_IRUGO | S_IWUSR, atxp1_showvcore, atxp1_storevcore); - -/* sys file functions for GPIO1 */ -static ssize_t atxp1_showgpio1(struct device *dev, struct device_attribute *attr, char *buf) -{ - int size; - struct atxp1_data *data; - - data = atxp1_update_device(dev); - - size = sprintf(buf, "0x%02x\n", data->reg.gpio1 & ATXP1_GPIO1MASK); - - return size; -} - -static ssize_t atxp1_storegpio1(struct device *dev, struct device_attribute *attr, const char*buf, size_t count) -{ - struct atxp1_data *data; - struct i2c_client *client; - unsigned int value; - - client = to_i2c_client(dev); - data = atxp1_update_device(dev); - - value = simple_strtoul(buf, NULL, 16); - - value &= ATXP1_GPIO1MASK; - - if (value != (data->reg.gpio1 & ATXP1_GPIO1MASK)) { - dev_info(dev, "Writing 0x%x to GPIO1.\n", value); - - i2c_smbus_write_byte_data(client, ATXP1_GPIO1, value); - - data->valid = 0; - } - - return count; -} - -/* GPIO1 data register - unit: Four bit as hex (e.g. 0x0f) -*/ -static DEVICE_ATTR(gpio1, S_IRUGO | S_IWUSR, atxp1_showgpio1, atxp1_storegpio1); - -/* sys file functions for GPIO2 */ -static ssize_t atxp1_showgpio2(struct device *dev, struct device_attribute *attr, char *buf) -{ - int size; - struct atxp1_data *data; - - data = atxp1_update_device(dev); - - size = sprintf(buf, "0x%02x\n", data->reg.gpio2); - - return size; -} - -static ssize_t atxp1_storegpio2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct atxp1_data *data; - struct i2c_client *client; - unsigned int value; - - client = to_i2c_client(dev); - data = atxp1_update_device(dev); - - value = simple_strtoul(buf, NULL, 16) & 0xff; - - if (value != data->reg.gpio2) { - dev_info(dev, "Writing 0x%x to GPIO1.\n", value); - - i2c_smbus_write_byte_data(client, ATXP1_GPIO2, value); - - data->valid = 0; - } - - return count; -} - -/* GPIO2 data register - unit: Eight bit as hex (e.g. 0xff) -*/ -static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); - - -static int atxp1_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_detect(adapter, &addr_data, &atxp1_detect); -}; - -static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client * new_client; - struct atxp1_data * data; - int err = 0; - u8 temp; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - memset(data, 0, sizeof(struct atxp1_data)); - new_client = &data->client; - i2c_set_clientdata(new_client, data); - - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &atxp1_driver; - new_client->flags = 0; - - /* Detect ATXP1, checking if vendor ID registers are all zero */ - if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) && - (i2c_smbus_read_byte_data(new_client, 0x3f) == 0) && - (i2c_smbus_read_byte_data(new_client, 0xfe) == 0) && - (i2c_smbus_read_byte_data(new_client, 0xff) == 0) )) { - - /* No vendor ID, now checking if registers 0x10,0x11 (non-existent) - * showing the same as register 0x00 */ - temp = i2c_smbus_read_byte_data(new_client, 0x00); - - if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && - (i2c_smbus_read_byte_data(new_client, 0x11) == temp) )) - goto exit_free; - } - - /* Get VRM */ - data->vrm = i2c_which_vrm(); - - if ((data->vrm != 90) && (data->vrm != 91)) { - dev_err(&new_client->dev, "Not supporting VRM %d.%d\n", - data->vrm / 10, data->vrm % 10); - goto exit_free; - } - - strncpy(new_client->name, "atxp1", I2C_NAME_SIZE); - - data->valid = 0; - - init_MUTEX(&data->update_lock); - - err = i2c_attach_client(new_client); - - if (err) - { - dev_err(&new_client->dev, "Attach client error.\n"); - goto exit_free; - } - - device_create_file(&new_client->dev, &dev_attr_gpio1); - device_create_file(&new_client->dev, &dev_attr_gpio2); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - - dev_info(&new_client->dev, "Using VRM: %d.%d\n", - data->vrm / 10, data->vrm % 10); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -}; - -static int atxp1_detach_client(struct i2c_client * client) -{ - int err; - - err = i2c_detach_client(client); - - if (err) - dev_err(&client->dev, "Failed to detach client.\n"); - else - kfree(i2c_get_clientdata(client)); - - return err; -}; - -static int __init atxp1_init(void) -{ - return i2c_add_driver(&atxp1_driver); -}; - -static void __exit atxp1_exit(void) -{ - i2c_del_driver(&atxp1_driver); -}; - -module_init(atxp1_init); -module_exit(atxp1_exit); diff --git a/drivers/i2c/chips/ds1621.c b/drivers/i2c/chips/ds1621.c deleted file mode 100644 index 5360d58804f6..000000000000 --- a/drivers/i2c/chips/ds1621.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - ds1621.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23 - based on lm75.c by Frodo Looijaard <frodol@dds.nl> - Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with - the help of Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include "lm75.h" - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, - 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(ds1621); -static int polarity = -1; -module_param(polarity, int, 0); -MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low"); - -/* Many DS1621 constants specified below */ -/* Config register used for detection */ -/* 7 6 5 4 3 2 1 0 */ -/* |Done|THF |TLF |NVB | X | X |POL |1SHOT| */ -#define DS1621_REG_CONFIG_NVB 0x10 -#define DS1621_REG_CONFIG_POLARITY 0x02 -#define DS1621_REG_CONFIG_1SHOT 0x01 -#define DS1621_REG_CONFIG_DONE 0x80 - -/* The DS1621 registers */ -#define DS1621_REG_TEMP 0xAA /* word, RO */ -#define DS1621_REG_TEMP_MIN 0xA1 /* word, RW */ -#define DS1621_REG_TEMP_MAX 0xA2 /* word, RW */ -#define DS1621_REG_CONF 0xAC /* byte, RW */ -#define DS1621_COM_START 0xEE /* no data */ -#define DS1621_COM_STOP 0x22 /* no data */ - -/* The DS1621 configuration register */ -#define DS1621_ALARM_TEMP_HIGH 0x40 -#define DS1621_ALARM_TEMP_LOW 0x20 - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ -#define ALARMS_FROM_REG(val) ((val) & \ - (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW)) - -/* Each client has this additional data */ -struct ds1621_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u16 temp, temp_min, temp_max; /* Register values, word */ - u8 conf; /* Register encoding, combined */ -}; - -static int ds1621_attach_adapter(struct i2c_adapter *adapter); -static int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind); -static void ds1621_init_client(struct i2c_client *client); -static int ds1621_detach_client(struct i2c_client *client); -static struct ds1621_data *ds1621_update_client(struct device *dev); - -/* This is the driver that will be inserted */ -static struct i2c_driver ds1621_driver = { - .owner = THIS_MODULE, - .name = "ds1621", - .id = I2C_DRIVERID_DS1621, - .flags = I2C_DF_NOTIFY, - .attach_adapter = ds1621_attach_adapter, - .detach_client = ds1621_detach_client, -}; - -/* All registers are word-sized, except for the configuration register. - DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int ds1621_read_value(struct i2c_client *client, u8 reg) -{ - if (reg == DS1621_REG_CONF) - return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); -} - -/* All registers are word-sized, except for the configuration register. - DS1621 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int ds1621_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if (reg == DS1621_REG_CONF) - return i2c_smbus_write_byte_data(client, reg, value); - else - return i2c_smbus_write_word_data(client, reg, swab16(value)); -} - -static void ds1621_init_client(struct i2c_client *client) -{ - int reg = ds1621_read_value(client, DS1621_REG_CONF); - /* switch to continuous conversion mode */ - reg &= ~ DS1621_REG_CONFIG_1SHOT; - - /* setup output polarity */ - if (polarity == 0) - reg &= ~DS1621_REG_CONFIG_POLARITY; - else if (polarity == 1) - reg |= DS1621_REG_CONFIG_POLARITY; - - ds1621_write_value(client, DS1621_REG_CONF, reg); - - /* start conversion */ - i2c_smbus_write_byte(client, DS1621_COM_START); -} - -#define show(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct ds1621_data *data = ds1621_update_client(dev); \ - return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \ -} - -show(temp); -show(temp_min); -show(temp_max); - -#define set_temp(suffix, value, reg) \ -static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct ds1621_data *data = ds1621_update_client(dev); \ - u16 val = LM75_TEMP_TO_REG(simple_strtoul(buf, NULL, 10)); \ - \ - down(&data->update_lock); \ - data->value = val; \ - ds1621_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} - -set_temp(min, temp_min, DS1621_REG_TEMP_MIN); -set_temp(max, temp_max, DS1621_REG_TEMP_MAX); - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct ds1621_data *data = ds1621_update_client(dev); - return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf)); -} - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -static DEVICE_ATTR(temp1_input, S_IRUGO , show_temp, NULL); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO , show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); - - -static int ds1621_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_detect(adapter, &addr_data, ds1621_detect); -} - -/* This function is called by i2c_detect */ -int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind) -{ - int conf, temp; - struct i2c_client *new_client; - struct ds1621_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA - | I2C_FUNC_SMBUS_WORD_DATA - | I2C_FUNC_SMBUS_WRITE_BYTE)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access ds1621_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct ds1621_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &ds1621_driver; - new_client->flags = 0; - - - /* Now, we do the remaining detection. It is lousy. */ - if (kind < 0) { - /* The NVB bit should be low if no EEPROM write has been - requested during the latest 10ms, which is highly - improbable in our case. */ - conf = ds1621_read_value(new_client, DS1621_REG_CONF); - if (conf & DS1621_REG_CONFIG_NVB) - goto exit_free; - /* The 7 lowest bits of a temperature should always be 0. */ - temp = ds1621_read_value(new_client, DS1621_REG_TEMP); - if (temp & 0x007f) - goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MIN); - if (temp & 0x007f) - goto exit_free; - temp = ds1621_read_value(new_client, DS1621_REG_TEMP_MAX); - if (temp & 0x007f) - goto exit_free; - } - - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = ds1621; - - /* Fill in remaining client fields and put it into the global list */ - strlcpy(new_client->name, "ds1621", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the DS1621 chip */ - ds1621_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - - return 0; - -/* OK, this is not exactly good programming practice, usually. But it is - very code-efficient in this case. */ - exit_free: - kfree(data); - exit: - return err; -} - -static int ds1621_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - - return 0; -} - - -static struct ds1621_data *ds1621_update_client(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct ds1621_data *data = i2c_get_clientdata(client); - u8 new_conf; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - dev_dbg(&client->dev, "Starting ds1621 update\n"); - - data->conf = ds1621_read_value(client, DS1621_REG_CONF); - - data->temp = ds1621_read_value(client, DS1621_REG_TEMP); - - data->temp_min = ds1621_read_value(client, - DS1621_REG_TEMP_MIN); - data->temp_max = ds1621_read_value(client, - DS1621_REG_TEMP_MAX); - - /* reset alarms if necessary */ - new_conf = data->conf; - if (data->temp < data->temp_min) - new_conf &= ~DS1621_ALARM_TEMP_LOW; - if (data->temp > data->temp_max) - new_conf &= ~DS1621_ALARM_TEMP_HIGH; - if (data->conf != new_conf) - ds1621_write_value(client, DS1621_REG_CONF, - new_conf); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init ds1621_init(void) -{ - return i2c_add_driver(&ds1621_driver); -} - -static void __exit ds1621_exit(void) -{ - i2c_del_driver(&ds1621_driver); -} - - -MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>"); -MODULE_DESCRIPTION("DS1621 driver"); -MODULE_LICENSE("GPL"); - -module_init(ds1621_init); -module_exit(ds1621_exit); diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index addf0adc24d4..6ea413f6d5e5 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -173,9 +173,6 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) | I2C_FUNC_SMBUS_BYTE)) goto exit; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access eeprom_{read,write}_value. */ if (!(data = kmalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; diff --git a/drivers/i2c/chips/fscher.c b/drivers/i2c/chips/fscher.c deleted file mode 100644 index da411741c2c5..000000000000 --- a/drivers/i2c/chips/fscher.c +++ /dev/null @@ -1,691 +0,0 @@ -/* - * fscher.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * fujitsu siemens hermes chip, - * module based on fscpos.c - * Copyright (C) 2000 Hermann Jung <hej@odn.de> - * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - * and Philip Edelbrock <phil@netroedge.com> - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - -/* - * Addresses to scan - */ - -static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(fscher); - -/* - * The FSCHER registers - */ - -/* chip identification */ -#define FSCHER_REG_IDENT_0 0x00 -#define FSCHER_REG_IDENT_1 0x01 -#define FSCHER_REG_IDENT_2 0x02 -#define FSCHER_REG_REVISION 0x03 - -/* global control and status */ -#define FSCHER_REG_EVENT_STATE 0x04 -#define FSCHER_REG_CONTROL 0x05 - -/* watchdog */ -#define FSCHER_REG_WDOG_PRESET 0x28 -#define FSCHER_REG_WDOG_STATE 0x23 -#define FSCHER_REG_WDOG_CONTROL 0x21 - -/* fan 0 */ -#define FSCHER_REG_FAN0_MIN 0x55 -#define FSCHER_REG_FAN0_ACT 0x0e -#define FSCHER_REG_FAN0_STATE 0x0d -#define FSCHER_REG_FAN0_RIPPLE 0x0f - -/* fan 1 */ -#define FSCHER_REG_FAN1_MIN 0x65 -#define FSCHER_REG_FAN1_ACT 0x6b -#define FSCHER_REG_FAN1_STATE 0x62 -#define FSCHER_REG_FAN1_RIPPLE 0x6f - -/* fan 2 */ -#define FSCHER_REG_FAN2_MIN 0xb5 -#define FSCHER_REG_FAN2_ACT 0xbb -#define FSCHER_REG_FAN2_STATE 0xb2 -#define FSCHER_REG_FAN2_RIPPLE 0xbf - -/* voltage supervision */ -#define FSCHER_REG_VOLT_12 0x45 -#define FSCHER_REG_VOLT_5 0x42 -#define FSCHER_REG_VOLT_BATT 0x48 - -/* temperature 0 */ -#define FSCHER_REG_TEMP0_ACT 0x64 -#define FSCHER_REG_TEMP0_STATE 0x71 - -/* temperature 1 */ -#define FSCHER_REG_TEMP1_ACT 0x32 -#define FSCHER_REG_TEMP1_STATE 0x81 - -/* temperature 2 */ -#define FSCHER_REG_TEMP2_ACT 0x35 -#define FSCHER_REG_TEMP2_STATE 0x91 - -/* - * Functions declaration - */ - -static int fscher_attach_adapter(struct i2c_adapter *adapter); -static int fscher_detect(struct i2c_adapter *adapter, int address, int kind); -static int fscher_detach_client(struct i2c_client *client); -static struct fscher_data *fscher_update_device(struct device *dev); -static void fscher_init_client(struct i2c_client *client); - -static int fscher_read_value(struct i2c_client *client, u8 reg); -static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver fscher_driver = { - .owner = THIS_MODULE, - .name = "fscher", - .id = I2C_DRIVERID_FSCHER, - .flags = I2C_DF_NOTIFY, - .attach_adapter = fscher_attach_adapter, - .detach_client = fscher_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct fscher_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* register values */ - u8 revision; /* revision of chip */ - u8 global_event; /* global event status */ - u8 global_control; /* global control register */ - u8 watchdog[3]; /* watchdog */ - u8 volt[3]; /* 12, 5, battery voltage */ - u8 temp_act[3]; /* temperature */ - u8 temp_status[3]; /* status of sensor */ - u8 fan_act[3]; /* fans revolutions per second */ - u8 fan_status[3]; /* fan status */ - u8 fan_min[3]; /* fan min value for rps */ - u8 fan_ripple[3]; /* divider for rps */ -}; - -/* - * Sysfs stuff - */ - -#define sysfs_r(kind, sub, offset, reg) \ -static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \ -static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \ -static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct fscher_data *data = fscher_update_device(dev); \ - return show_##kind##sub(data, buf, (offset)); \ -} - -#define sysfs_w(kind, sub, offset, reg) \ -static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \ -static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \ -static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscher_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, (offset), reg); \ -} - -#define sysfs_rw_n(kind, sub, offset, reg) \ -sysfs_r(kind, sub, offset, reg) \ -sysfs_w(kind, sub, offset, reg) \ -static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub); - -#define sysfs_rw(kind, sub, reg) \ -sysfs_r(kind, sub, 0, reg) \ -sysfs_w(kind, sub, 0, reg) \ -static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub); - -#define sysfs_ro_n(kind, sub, offset, reg) \ -sysfs_r(kind, sub, offset, reg) \ -static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL); - -#define sysfs_ro(kind, sub, reg) \ -sysfs_r(kind, sub, 0, reg) \ -static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL); - -#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \ -sysfs_rw_n(pwm, , offset, reg_min) \ -sysfs_rw_n(fan, _status, offset, reg_status) \ -sysfs_rw_n(fan, _div , offset, reg_ripple) \ -sysfs_ro_n(fan, _input , offset, reg_act) - -#define sysfs_temp(offset, reg_status, reg_act) \ -sysfs_rw_n(temp, _status, offset, reg_status) \ -sysfs_ro_n(temp, _input , offset, reg_act) - -#define sysfs_in(offset, reg_act) \ -sysfs_ro_n(in, _input, offset, reg_act) - -#define sysfs_revision(reg_revision) \ -sysfs_ro(revision, , reg_revision) - -#define sysfs_alarms(reg_events) \ -sysfs_ro(alarms, , reg_events) - -#define sysfs_control(reg_control) \ -sysfs_rw(control, , reg_control) - -#define sysfs_watchdog(reg_control, reg_status, reg_preset) \ -sysfs_rw(watchdog, _control, reg_control) \ -sysfs_rw(watchdog, _status , reg_status) \ -sysfs_rw(watchdog, _preset , reg_preset) - -sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN, - FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT) -sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN, - FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT) -sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN, - FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT) - -sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT) -sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT) -sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT) - -sysfs_in(0, FSCHER_REG_VOLT_12) -sysfs_in(1, FSCHER_REG_VOLT_5) -sysfs_in(2, FSCHER_REG_VOLT_BATT) - -sysfs_revision(FSCHER_REG_REVISION) -sysfs_alarms(FSCHER_REG_EVENTS) -sysfs_control(FSCHER_REG_CONTROL) -sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET) - -#define device_create_file_fan(client, offset) \ -do { \ - device_create_file(&client->dev, &dev_attr_fan##offset##_status); \ - device_create_file(&client->dev, &dev_attr_pwm##offset); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ - device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ -} while (0) - -#define device_create_file_temp(client, offset) \ -do { \ - device_create_file(&client->dev, &dev_attr_temp##offset##_status); \ - device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ -} while (0) - -#define device_create_file_in(client, offset) \ -do { \ - device_create_file(&client->dev, &dev_attr_in##offset##_input); \ -} while (0) - -#define device_create_file_revision(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_revision); \ -} while (0) - -#define device_create_file_alarms(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_alarms); \ -} while (0) - -#define device_create_file_control(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_control); \ -} while (0) - -#define device_create_file_watchdog(client) \ -do { \ - device_create_file(&client->dev, &dev_attr_watchdog_status); \ - device_create_file(&client->dev, &dev_attr_watchdog_control); \ - device_create_file(&client->dev, &dev_attr_watchdog_preset); \ -} while (0) - -/* - * Real code - */ - -static int fscher_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, fscher_detect); -} - -static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct fscher_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access i2c_smbus_read_byte_data. */ - if (!(data = kmalloc(sizeof(struct fscher_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct fscher_data)); - - /* The common I2C client data is placed right before the - * Hermes-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &fscher_driver; - new_client->flags = 0; - - /* Do the remaining detection unless force or force_fscher parameter */ - if (kind < 0) { - if ((i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_0) != 0x48) /* 'H' */ - || (i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_1) != 0x45) /* 'E' */ - || (i2c_smbus_read_byte_data(new_client, - FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */ - goto exit_free; - } - - /* Fill in the remaining client fields and put it into the - * global list */ - strlcpy(new_client->name, "fscher", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - fscher_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file_revision(new_client); - device_create_file_alarms(new_client); - device_create_file_control(new_client); - device_create_file_watchdog(new_client); - - device_create_file_in(new_client, 0); - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - device_create_file_temp(new_client, 3); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int fscher_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static int fscher_read_value(struct i2c_client *client, u8 reg) -{ - dev_dbg(&client->dev, "read reg 0x%02x\n", reg); - - return i2c_smbus_read_byte_data(client, reg); -} - -static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n", - reg, value); - - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new FSC Hermes. */ -static void fscher_init_client(struct i2c_client *client) -{ - struct fscher_data *data = i2c_get_clientdata(client); - - /* Read revision from chip */ - data->revision = fscher_read_value(client, FSCHER_REG_REVISION); -} - -static struct fscher_data *fscher_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct fscher_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - - dev_dbg(&client->dev, "Starting fscher update\n"); - - data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT); - data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT); - data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT); - data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE); - data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE); - data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE); - - data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12); - data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5); - data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT); - - data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT); - data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT); - data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT); - data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE); - data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE); - data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE); - data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN); - data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN); - data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN); - data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE); - data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE); - data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE); - - data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET); - data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE); - data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL); - - data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - - - -#define FAN_INDEX_FROM_NUM(nr) ((nr) - 1) - -static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04; - - down(&data->update_lock); - data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v; - fscher_write_value(client, reg, v); - up(&data->update_lock); - return count; -} - -static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04); -} - -static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v; - fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]); -} - -static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); - - switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 2, 4 or 8!\n", v); - return -EINVAL; - } - - down(&data->update_lock); - - /* bits 2..7 reserved => mask with 0x03 */ - data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03; - data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v; - - fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]); - up(&data->update_lock); - return count; -} - -static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03)); -} - -#define RPM_FROM_REG(val) (val*60) - -static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)])); -} - - - -#define TEMP_INDEX_FROM_NUM(nr) ((nr) - 1) - -static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 2..7 reserved, 0 read only => mask with 0x02 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - down(&data->update_lock); - data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v; - fscher_write_value(client, reg, v); - up(&data->update_lock); - return count; -} - -static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03); -} - -#define TEMP_FROM_REG(val) (((val) - 128) * 1000) - -static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)])); -} - -/* - * The final conversion is specified in sensors.conf, as it depends on - * mainboard specific values. We export the registers contents as - * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much - * sense per se, but it minimizes the conversions count and keeps the - * values within a usual range. - */ -#define VOLT_FROM_REG(val) ((val) * 10) - -static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr])); -} - - - -static ssize_t show_revision(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->revision); -} - - - -static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr) -{ - /* bits 2, 5..6 reserved => mask with 0x9b */ - return sprintf(buf, "%u\n", data->global_event & 0x9b); -} - - - -static ssize_t set_control(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 1..7 reserved => mask with 0x01 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01; - - down(&data->update_lock); - data->global_control &= ~v; - fscher_write_value(client, reg, v); - up(&data->update_lock); - return count; -} - -static ssize_t show_control(struct fscher_data *data, char *buf, int nr) -{ - /* bits 1..7 reserved => mask with 0x01 */ - return sprintf(buf, "%u\n", data->global_control & 0x01); -} - - - -static ssize_t set_watchdog_control(struct i2c_client *client, struct - fscher_data *data, const char *buf, size_t count, - int nr, int reg) -{ - /* bits 0..3 reserved => mask with 0xf0 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - - down(&data->update_lock); - data->watchdog[2] &= ~0xf0; - data->watchdog[2] |= v; - fscher_write_value(client, reg, data->watchdog[2]); - up(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */ - return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0); -} - -static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - down(&data->update_lock); - data->watchdog[1] &= ~v; - fscher_write_value(client, reg, v); - up(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - return sprintf(buf, "%u\n", data->watchdog[1] & 0x02); -} - -static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - - down(&data->update_lock); - data->watchdog[0] = v; - fscher_write_value(client, reg, data->watchdog[0]); - up(&data->update_lock); - return count; -} - -static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->watchdog[0]); -} - -static int __init sensors_fscher_init(void) -{ - return i2c_add_driver(&fscher_driver); -} - -static void __exit sensors_fscher_exit(void) -{ - i2c_del_driver(&fscher_driver); -} - -MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>"); -MODULE_DESCRIPTION("FSC Hermes driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_fscher_init); -module_exit(sensors_fscher_exit); diff --git a/drivers/i2c/chips/fscpos.c b/drivers/i2c/chips/fscpos.c deleted file mode 100644 index 3beaa6191ef4..000000000000 --- a/drivers/i2c/chips/fscpos.c +++ /dev/null @@ -1,641 +0,0 @@ -/* - fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips - Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - fujitsu siemens poseidon chip, - module based on the old fscpos module by Hermann Jung <hej@odn.de> and - the fscher module by Reinhard Nissl <rnissl@gmx.de> - - original module based on lm80.c - Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - and Philip Edelbrock <phil@netroedge.com> - - Thanks to Jean Delvare for reviewing my code and suggesting a lot of - improvements. -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/init.h> - -/* - * Addresses to scan - */ -static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ -SENSORS_INSMOD_1(fscpos); - -/* - * The FSCPOS registers - */ - -/* chip identification */ -#define FSCPOS_REG_IDENT_0 0x00 -#define FSCPOS_REG_IDENT_1 0x01 -#define FSCPOS_REG_IDENT_2 0x02 -#define FSCPOS_REG_REVISION 0x03 - -/* global control and status */ -#define FSCPOS_REG_EVENT_STATE 0x04 -#define FSCPOS_REG_CONTROL 0x05 - -/* watchdog */ -#define FSCPOS_REG_WDOG_PRESET 0x28 -#define FSCPOS_REG_WDOG_STATE 0x23 -#define FSCPOS_REG_WDOG_CONTROL 0x21 - -/* voltages */ -#define FSCPOS_REG_VOLT_12 0x45 -#define FSCPOS_REG_VOLT_5 0x42 -#define FSCPOS_REG_VOLT_BATT 0x48 - -/* fans - the chip does not support minimum speed for fan2 */ -static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 }; -static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab }; -static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 }; -static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf }; - -/* temperatures */ -static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 }; -static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; - -/* - * Functions declaration - */ -static int fscpos_attach_adapter(struct i2c_adapter *adapter); -static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind); -static int fscpos_detach_client(struct i2c_client *client); - -static int fscpos_read_value(struct i2c_client *client, u8 register); -static int fscpos_write_value(struct i2c_client *client, u8 register, u8 value); -static struct fscpos_data *fscpos_update_device(struct device *dev); -static void fscpos_init_client(struct i2c_client *client); - -static void reset_fan_alarm(struct i2c_client *client, int nr); - -/* - * Driver data (common to all clients) - */ -static struct i2c_driver fscpos_driver = { - .owner = THIS_MODULE, - .name = "fscpos", - .id = I2C_DRIVERID_FSCPOS, - .flags = I2C_DF_NOTIFY, - .attach_adapter = fscpos_attach_adapter, - .detach_client = fscpos_detach_client, -}; - -/* - * Client data (each client gets its own) - */ -struct fscpos_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* 0 until following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - /* register values */ - u8 revision; /* revision of chip */ - u8 global_event; /* global event status */ - u8 global_control; /* global control register */ - u8 wdog_control; /* watchdog control */ - u8 wdog_state; /* watchdog status */ - u8 wdog_preset; /* watchdog preset */ - u8 volt[3]; /* 12, 5, battery current */ - u8 temp_act[3]; /* temperature */ - u8 temp_status[3]; /* status of sensor */ - u8 fan_act[3]; /* fans revolutions per second */ - u8 fan_status[3]; /* fan status */ - u8 pwm[2]; /* fan min value for rps */ - u8 fan_ripple[3]; /* divider for rps */ -}; - -/* Temperature */ -#define TEMP_FROM_REG(val) (((val) - 128) * 1000) - -static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1])); -} - -static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03); -} - -static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "1\n"); -} - -static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - if (v != 1) { - dev_err(&client->dev, "temp_reset value %ld not supported. " - "Use 1 to reset the alarm!\n", v); - return -EINVAL; - } - - dev_info(&client->dev, "You used the temp_reset feature which has not " - "been proplerly tested. Please report your " - "experience to the module author.\n"); - - /* Supported value: 2 (clears the status) */ - fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr], 2); - return count; -} - -/* Fans */ -#define RPM_FROM_REG(val) ((val) * 60) - -static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 0..1, 3..7 reserved => mask with 0x04 */ - return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04); -} - -static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1])); -} - -static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr) -{ - /* bits 2..7 reserved => mask with 0x03 */ - return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03); -} - -static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int nr, int reg) -{ - /* supported values: 2, 4, 8 */ - unsigned long v = simple_strtoul(buf, NULL, 10); - - switch (v) { - case 2: v = 1; break; - case 4: v = 2; break; - case 8: v = 3; break; - default: - dev_err(&client->dev, "fan_ripple value %ld not supported. " - "Must be one of 2, 4 or 8!\n", v); - return -EINVAL; - } - - down(&data->update_lock); - /* bits 2..7 reserved => mask with 0x03 */ - data->fan_ripple[nr - 1] &= ~0x03; - data->fan_ripple[nr - 1] |= v; - - fscpos_write_value(client, reg, data->fan_ripple[nr - 1]); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr) -{ - return sprintf(buf, "%u\n", data->pwm[nr - 1]); -} - -static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data, - const char *buf, size_t count, int nr, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - - /* Range: 0..255 */ - if (v < 0) v = 0; - if (v > 255) v = 255; - - down(&data->update_lock); - data->pwm[nr - 1] = v; - fscpos_write_value(client, reg, data->pwm[nr - 1]); - up(&data->update_lock); - return count; -} - -static void reset_fan_alarm(struct i2c_client *client, int nr) -{ - fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4); -} - -/* Volts */ -#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255) - -static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200)); -} - -static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600)); -} - -static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300)); -} - -/* Watchdog */ -static ssize_t show_wdog_control(struct fscpos_data *data, char *buf) -{ - /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */ - return sprintf(buf, "%u\n", data->wdog_control & 0xb0); -} - -static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - /* bits 0..3 reserved => mask with 0xf0 */ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0; - - down(&data->update_lock); - data->wdog_control &= ~0xf0; - data->wdog_control |= v; - fscpos_write_value(client, reg, data->wdog_control); - up(&data->update_lock); - return count; -} - -static ssize_t show_wdog_state(struct fscpos_data *data, char *buf) -{ - /* bits 0, 2..7 reserved => mask with 0x02 */ - return sprintf(buf, "%u\n", data->wdog_state & 0x02); -} - -static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02; - - /* Valid values: 2 (clear) */ - if (v != 2) { - dev_err(&client->dev, "wdog_state value %ld not supported. " - "Must be 2 to clear the state!\n", v); - return -EINVAL; - } - - down(&data->update_lock); - data->wdog_state &= ~v; - fscpos_write_value(client, reg, v); - up(&data->update_lock); - return count; -} - -static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf) -{ - return sprintf(buf, "%u\n", data->wdog_preset); -} - -static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data - *data, const char *buf, size_t count, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff; - - down(&data->update_lock); - data->wdog_preset = v; - fscpos_write_value(client, reg, data->wdog_preset); - up(&data->update_lock); - return count; -} - -/* Event */ -static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf) -{ - /* bits 5..7 reserved => mask with 0x1f */ - struct fscpos_data *data = fscpos_update_device(dev); - return sprintf(buf, "%u\n", data->global_event & 0x9b); -} - -/* - * Sysfs stuff - */ -#define create_getter(kind, sub) \ - static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf); \ - } - -#define create_getter_n(kind, offset, sub) \ - static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\ - *buf) \ - { \ - struct fscpos_data *data = fscpos_update_device(dev); \ - return show_##kind##sub(data, buf, offset); \ - } - -#define create_setter(kind, sub, reg) \ - static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \ - *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, reg); \ - } - -#define create_setter_n(kind, offset, sub, reg) \ - static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ - { \ - struct i2c_client *client = to_i2c_client(dev); \ - struct fscpos_data *data = i2c_get_clientdata(client); \ - return set_##kind##sub(client, data, buf, count, offset, reg);\ - } - -#define create_sysfs_device_ro(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \ - sysfs_show_##kind##offset##sub, NULL); - -#define create_sysfs_device_rw(kind, sub, offset) \ - static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \ - sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub); - -#define sysfs_ro_n(kind, sub, offset) \ - create_getter_n(kind, offset, sub); \ - create_sysfs_device_ro(kind, sub, offset); - -#define sysfs_rw_n(kind, sub, offset, reg) \ - create_getter_n(kind, offset, sub); \ - create_setter_n(kind, offset, sub, reg); \ - create_sysfs_device_rw(kind, sub, offset); - -#define sysfs_rw(kind, sub, reg) \ - create_getter(kind, sub); \ - create_setter(kind, sub, reg); \ - create_sysfs_device_rw(kind, sub,); - -#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \ - sysfs_fan(offset, reg_status, reg_ripple); \ - sysfs_rw_n(pwm,, offset, reg_min); - -#define sysfs_fan(offset, reg_status, reg_ripple) \ - sysfs_ro_n(fan, _input, offset); \ - sysfs_ro_n(fan, _status, offset); \ - sysfs_rw_n(fan, _ripple, offset, reg_ripple); - -#define sysfs_temp(offset, reg_status) \ - sysfs_ro_n(temp, _input, offset); \ - sysfs_ro_n(temp, _status, offset); \ - sysfs_rw_n(temp, _reset, offset, reg_status); - -#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \ - sysfs_rw(wdog, _control, reg_wdog_control); \ - sysfs_rw(wdog, _preset, reg_wdog_preset); \ - sysfs_rw(wdog, _state, reg_wdog_state); - -sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0], - FSCPOS_REG_PWM[0]); -sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1], - FSCPOS_REG_PWM[1]); -sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]); - -sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]); -sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]); -sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]); - -sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE, - FSCPOS_REG_WDOG_CONTROL); - -static DEVICE_ATTR(event, S_IRUGO, show_event, NULL); -static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL); -static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL); -static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL); - -static int fscpos_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, fscpos_detect); -} - -int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct fscpos_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* - * OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access fscpos_{read,write}_value. - */ - - if (!(data = kmalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct fscpos_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &fscpos_driver; - new_client->flags = 0; - - /* Do the remaining detection unless force or force_fscpos parameter */ - if (kind < 0) { - if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0) - != 0x50) /* 'P' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1) - != 0x45) /* 'E' */ - || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) - != 0x47))/* 'G' */ - { - dev_dbg(&new_client->dev, "fscpos detection failed\n"); - goto exit_free; - } - } - - /* Fill in the remaining client fields and put it in the global list */ - strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE); - - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Inizialize the fscpos chip */ - fscpos_init_client(new_client); - - /* Announce that the chip was found */ - dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_event); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_wdog_control); - device_create_file(&new_client->dev, &dev_attr_wdog_preset); - device_create_file(&new_client->dev, &dev_attr_wdog_state); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_status); - device_create_file(&new_client->dev, &dev_attr_temp1_reset); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_status); - device_create_file(&new_client->dev, &dev_attr_temp2_reset); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_status); - device_create_file(&new_client->dev, &dev_attr_temp3_reset); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_status); - device_create_file(&new_client->dev, &dev_attr_fan1_ripple); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_status); - device_create_file(&new_client->dev, &dev_attr_fan2_ripple); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan3_status); - device_create_file(&new_client->dev, &dev_attr_fan3_ripple); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int fscpos_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, client" - " not detached.\n"); - return err; - } - kfree(i2c_get_clientdata(client)); - return 0; -} - -static int fscpos_read_value(struct i2c_client *client, u8 reg) -{ - dev_dbg(&client->dev, "Read reg 0x%02x\n", reg); - return i2c_smbus_read_byte_data(client, reg); -} - -static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value); - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new FSCPOS chip */ -static void fscpos_init_client(struct i2c_client *client) -{ - struct fscpos_data *data = i2c_get_clientdata(client); - - /* read revision from chip */ - data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION); -} - -static struct fscpos_data *fscpos_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct fscpos_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if ((jiffies - data->last_updated > 2 * HZ) || - (jiffies < data->last_updated) || !data->valid) { - int i; - - dev_dbg(&client->dev, "Starting fscpos update\n"); - - for (i = 0; i < 3; i++) { - data->temp_act[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_ACT[i]); - data->temp_status[i] = fscpos_read_value(client, - FSCPOS_REG_TEMP_STATE[i]); - data->fan_act[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_ACT[i]); - data->fan_status[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_STATE[i]); - data->fan_ripple[i] = fscpos_read_value(client, - FSCPOS_REG_FAN_RIPPLE[i]); - if (i < 2) { - /* fan2_min is not supported by the chip */ - data->pwm[i] = fscpos_read_value(client, - FSCPOS_REG_PWM[i]); - } - /* reset fan status if speed is back to > 0 */ - if (data->fan_status[i] != 0 && data->fan_act[i] > 0) { - reset_fan_alarm(client, i); - } - } - - data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12); - data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5); - data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT); - - data->wdog_preset = fscpos_read_value(client, - FSCPOS_REG_WDOG_PRESET); - data->wdog_state = fscpos_read_value(client, - FSCPOS_REG_WDOG_STATE); - data->wdog_control = fscpos_read_value(client, - FSCPOS_REG_WDOG_CONTROL); - - data->global_event = fscpos_read_value(client, - FSCPOS_REG_EVENT_STATE); - - data->last_updated = jiffies; - data->valid = 1; - } - up(&data->update_lock); - return data; -} - -static int __init sm_fscpos_init(void) -{ - return i2c_add_driver(&fscpos_driver); -} - -static void __exit sm_fscpos_exit(void) -{ - i2c_del_driver(&fscpos_driver); -} - -MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung " - "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>" - " and Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver"); -MODULE_LICENSE("GPL"); - -module_init(sm_fscpos_init); -module_exit(sm_fscpos_exit); diff --git a/drivers/i2c/chips/gl518sm.c b/drivers/i2c/chips/gl518sm.c deleted file mode 100644 index 6bedf729dcf5..000000000000 --- a/drivers/i2c/chips/gl518sm.c +++ /dev/null @@ -1,604 +0,0 @@ -/* - * gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and - * Kyosti Malkki <kmalkki@cc.hut.fi> - * Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and - * Jean Delvare <khali@linux-fr.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare - * and advice of Greg Kroah-Hartman. - * - * Notes about the port: - * Release 0x00 of the GL518SM chipset doesn't support reading of in0, - * in1 nor in2. The original driver had an ugly workaround to get them - * anyway (changing limits and watching alarms trigger and wear off). - * We did not keep that part of the original driver in the Linux 2.6 - * version, since it was making the driver significantly more complex - * with no real benefit. - * - * History: - * 2004-01-28 Original port. (Hong-Gunn Chew) - * 2004-01-31 Code review and approval. (Jean Delvare) - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80); - -/* Many GL518 constants specified below */ - -/* The GL518 registers */ -#define GL518_REG_CHIP_ID 0x00 -#define GL518_REG_REVISION 0x01 -#define GL518_REG_VENDOR_ID 0x02 -#define GL518_REG_CONF 0x03 -#define GL518_REG_TEMP_IN 0x04 -#define GL518_REG_TEMP_MAX 0x05 -#define GL518_REG_TEMP_HYST 0x06 -#define GL518_REG_FAN_COUNT 0x07 -#define GL518_REG_FAN_LIMIT 0x08 -#define GL518_REG_VIN1_LIMIT 0x09 -#define GL518_REG_VIN2_LIMIT 0x0a -#define GL518_REG_VIN3_LIMIT 0x0b -#define GL518_REG_VDD_LIMIT 0x0c -#define GL518_REG_VIN3 0x0d -#define GL518_REG_MISC 0x0f -#define GL518_REG_ALARM 0x10 -#define GL518_REG_MASK 0x11 -#define GL518_REG_INT 0x12 -#define GL518_REG_VIN2 0x13 -#define GL518_REG_VIN1 0x14 -#define GL518_REG_VDD 0x15 - - -/* - * Conversions. Rounding and limit checking is only done on the TO_REG - * variants. Note that you should be a bit careful with which arguments - * these macros are called: arguments may be evaluated more than once. - * Fixing this is just not worth it. - */ - -#define RAW_FROM_REG(val) val - -#define BOOL_FROM_REG(val) ((val)?0:1) -#define BOOL_TO_REG(val) ((val)?0:1) - -#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0? \ - (val)-500:(val)+500)/1000)+119),0,255)) -#define TEMP_FROM_REG(val) (((val) - 119) * 1000) - -static inline u8 FAN_TO_REG(long rpm, int div) -{ - long rpmdiv; - if (rpm == 0) - return 0; - rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div; - return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255); -} -#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div)))) - -#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255)) -#define IN_FROM_REG(val) ((val)*19) - -#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255)) -#define VDD_FROM_REG(val) (((val)*95+2)/4) - -#define DIV_TO_REG(val) ((val)==4?2:(val)==2?1:(val)==1?0:3) -#define DIV_FROM_REG(val) (1 << (val)) - -#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask) -#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f) - -/* Each client has this additional data */ -struct gl518_data { - struct i2c_client client; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 voltage_in[4]; /* Register values; [0] = VDD */ - u8 voltage_min[4]; /* Register values; [0] = VDD */ - u8 voltage_max[4]; /* Register values; [0] = VDD */ - u8 iter_voltage_in[4]; /* Register values; [0] = VDD */ - u8 fan_in[2]; - u8 fan_min[2]; - u8 fan_div[2]; /* Register encoding, shifted right */ - u8 fan_auto1; /* Boolean */ - u8 temp_in; /* Register values */ - u8 temp_max; /* Register values */ - u8 temp_hyst; /* Register values */ - u8 alarms; /* Register value */ - u8 alarm_mask; /* Register value */ - u8 beep_mask; /* Register value */ - u8 beep_enable; /* Boolean */ -}; - -static int gl518_attach_adapter(struct i2c_adapter *adapter); -static int gl518_detect(struct i2c_adapter *adapter, int address, int kind); -static void gl518_init_client(struct i2c_client *client); -static int gl518_detach_client(struct i2c_client *client); -static int gl518_read_value(struct i2c_client *client, u8 reg); -static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value); -static struct gl518_data *gl518_update_device(struct device *dev); - -/* This is the driver that will be inserted */ -static struct i2c_driver gl518_driver = { - .owner = THIS_MODULE, - .name = "gl518sm", - .id = I2C_DRIVERID_GL518, - .flags = I2C_DF_NOTIFY, - .attach_adapter = gl518_attach_adapter, - .detach_client = gl518_detach_client, -}; - -/* - * Sysfs stuff - */ - -#define show(type, suffix, value) \ -static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct gl518_data *data = gl518_update_device(dev); \ - return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \ -} - -#define show_fan(suffix, value, index) \ -static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct gl518_data *data = gl518_update_device(dev); \ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index], \ - DIV_FROM_REG(data->fan_div[index]))); \ -} - -show(TEMP, temp_input1, temp_in); -show(TEMP, temp_max1, temp_max); -show(TEMP, temp_hyst1, temp_hyst); -show(BOOL, fan_auto1, fan_auto1); -show_fan(fan_input1, fan_in, 0); -show_fan(fan_input2, fan_in, 1); -show_fan(fan_min1, fan_min, 0); -show_fan(fan_min2, fan_min, 1); -show(DIV, fan_div1, fan_div[0]); -show(DIV, fan_div2, fan_div[1]); -show(VDD, in_input0, voltage_in[0]); -show(IN, in_input1, voltage_in[1]); -show(IN, in_input2, voltage_in[2]); -show(IN, in_input3, voltage_in[3]); -show(VDD, in_min0, voltage_min[0]); -show(IN, in_min1, voltage_min[1]); -show(IN, in_min2, voltage_min[2]); -show(IN, in_min3, voltage_min[3]); -show(VDD, in_max0, voltage_max[0]); -show(IN, in_max1, voltage_max[1]); -show(IN, in_max2, voltage_max[2]); -show(IN, in_max3, voltage_max[3]); -show(RAW, alarms, alarms); -show(BOOL, beep_enable, beep_enable); -show(BEEP_MASK, beep_mask, beep_mask); - -#define set(type, suffix, value, reg) \ -static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct gl518_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = type##_TO_REG(val); \ - gl518_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} - -#define set_bits(type, suffix, value, reg, mask, shift) \ -static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct gl518_data *data = i2c_get_clientdata(client); \ - int regvalue; \ - unsigned long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - regvalue = gl518_read_value(client, reg); \ - data->value = type##_TO_REG(val); \ - regvalue = (regvalue & ~mask) | (data->value << shift); \ - gl518_write_value(client, reg, regvalue); \ - up(&data->update_lock); \ - return count; \ -} - -#define set_low(type, suffix, value, reg) \ - set_bits(type, suffix, value, reg, 0x00ff, 0) -#define set_high(type, suffix, value, reg) \ - set_bits(type, suffix, value, reg, 0xff00, 8) - -set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX); -set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST); -set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3); -set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6); -set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4); -set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT); -set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT); -set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT); -set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT); -set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT); -set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT); -set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT); -set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT); -set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2); -set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM); - -static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct gl518_data *data = i2c_get_clientdata(client); - int regvalue; - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT); - data->fan_min[0] = FAN_TO_REG(val, - DIV_FROM_REG(data->fan_div[0])); - regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8); - gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue); - - data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); - if (data->fan_min[0] == 0) - data->alarm_mask &= ~0x20; - else - data->alarm_mask |= 0x20; - data->beep_mask &= data->alarm_mask; - gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); - - up(&data->update_lock); - return count; -} - -static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct gl518_data *data = i2c_get_clientdata(client); - int regvalue; - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT); - data->fan_min[1] = FAN_TO_REG(val, - DIV_FROM_REG(data->fan_div[1])); - regvalue = (regvalue & 0xff00) | data->fan_min[1]; - gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue); - - data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); - if (data->fan_min[1] == 0) - data->alarm_mask &= ~0x40; - else - data->alarm_mask |= 0x40; - data->beep_mask &= data->alarm_mask; - gl518_write_value(client, GL518_REG_ALARM, data->beep_mask); - - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); -static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1); -static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO, - show_temp_hyst1, set_temp_hyst1); -static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1); -static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL); -static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL); -static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1); -static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2); -static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1); -static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2); -static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL); -static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL); -static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL); -static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL); -static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0); -static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1); -static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2); -static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3); -static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0); -static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1); -static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2); -static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO, - show_beep_enable, set_beep_enable); -static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO, - show_beep_mask, set_beep_mask); - -/* - * Real code - */ - -static int gl518_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, gl518_detect); -} - -static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i; - struct i2c_client *new_client; - struct gl518_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access gl518_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct gl518_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &gl518_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - if (kind < 0) { - if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80) - || (gl518_read_value(new_client, GL518_REG_CONF) & 0x80)) - goto exit_free; - } - - /* Determine the chip type. */ - if (kind <= 0) { - i = gl518_read_value(new_client, GL518_REG_REVISION); - if (i == 0x00) { - kind = gl518sm_r00; - } else if (i == 0x80) { - kind = gl518sm_r80; - } else { - if (kind <= 0) - dev_info(&adapter->dev, - "Ignoring 'force' parameter for unknown " - "chip at adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - goto exit_free; - } - } - - /* Fill in the remaining client fields */ - strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE); - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the GL518SM chip */ - data->alarm_mask = 0xff; - data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0; - gl518_init_client((struct i2c_client *) new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_fan1_auto); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_beep_enable); - device_create_file(&new_client->dev, &dev_attr_beep_mask); - - return 0; - -/* OK, this is not exactly good programming practice, usually. But it is - very code-efficient in this case. */ - -exit_free: - kfree(data); -exit: - return err; -} - - -/* Called when we have found a new GL518SM. - Note that we preserve D4:NoFan2 and D2:beep_enable. */ -static void gl518_init_client(struct i2c_client *client) -{ - /* Make sure we leave D7:Reset untouched */ - u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f; - - /* Comparator mode (D3=0), standby mode (D6=0) */ - gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37)); - - /* Never interrupts */ - gl518_write_value(client, GL518_REG_MASK, 0x00); - - /* Clear status register (D5=1), start (D6=1) */ - gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue); - gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue); -} - -static int gl518_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - - return 0; -} - -/* Registers 0x07 to 0x0c are word-sized, others are byte-sized - GL518 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int gl518_read_value(struct i2c_client *client, u8 reg) -{ - if ((reg >= 0x07) && (reg <= 0x0c)) - return swab16(i2c_smbus_read_word_data(client, reg)); - else - return i2c_smbus_read_byte_data(client, reg); -} - -/* Registers 0x07 to 0x0c are word-sized, others are byte-sized - GL518 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if ((reg >= 0x07) && (reg <= 0x0c)) - return i2c_smbus_write_word_data(client, reg, swab16(value)); - else - return i2c_smbus_write_byte_data(client, reg, value); -} - -static struct gl518_data *gl518_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct gl518_data *data = i2c_get_clientdata(client); - int val; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(&client->dev, "Starting gl518 update\n"); - - data->alarms = gl518_read_value(client, GL518_REG_INT); - data->beep_mask = gl518_read_value(client, GL518_REG_ALARM); - - val = gl518_read_value(client, GL518_REG_VDD_LIMIT); - data->voltage_min[0] = val & 0xff; - data->voltage_max[0] = (val >> 8) & 0xff; - val = gl518_read_value(client, GL518_REG_VIN1_LIMIT); - data->voltage_min[1] = val & 0xff; - data->voltage_max[1] = (val >> 8) & 0xff; - val = gl518_read_value(client, GL518_REG_VIN2_LIMIT); - data->voltage_min[2] = val & 0xff; - data->voltage_max[2] = (val >> 8) & 0xff; - val = gl518_read_value(client, GL518_REG_VIN3_LIMIT); - data->voltage_min[3] = val & 0xff; - data->voltage_max[3] = (val >> 8) & 0xff; - - val = gl518_read_value(client, GL518_REG_FAN_COUNT); - data->fan_in[0] = (val >> 8) & 0xff; - data->fan_in[1] = val & 0xff; - - val = gl518_read_value(client, GL518_REG_FAN_LIMIT); - data->fan_min[0] = (val >> 8) & 0xff; - data->fan_min[1] = val & 0xff; - - data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN); - data->temp_max = - gl518_read_value(client, GL518_REG_TEMP_MAX); - data->temp_hyst = - gl518_read_value(client, GL518_REG_TEMP_HYST); - - val = gl518_read_value(client, GL518_REG_MISC); - data->fan_div[0] = (val >> 6) & 0x03; - data->fan_div[1] = (val >> 4) & 0x03; - data->fan_auto1 = (val >> 3) & 0x01; - - data->alarms &= data->alarm_mask; - - val = gl518_read_value(client, GL518_REG_CONF); - data->beep_enable = (val >> 2) & 1; - - if (data->type != gl518sm_r00) { - data->voltage_in[0] = - gl518_read_value(client, GL518_REG_VDD); - data->voltage_in[1] = - gl518_read_value(client, GL518_REG_VIN1); - data->voltage_in[2] = - gl518_read_value(client, GL518_REG_VIN2); - } - data->voltage_in[3] = - gl518_read_value(client, GL518_REG_VIN3); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_gl518sm_init(void) -{ - return i2c_add_driver(&gl518_driver); -} - -static void __exit sensors_gl518sm_exit(void) -{ - i2c_del_driver(&gl518_driver); -} - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " - "Kyosti Malkki <kmalkki@cc.hut.fi> and " - "Hong-Gunn Chew <hglinux@gunnet.org>"); -MODULE_DESCRIPTION("GL518SM driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_gl518sm_init); -module_exit(sensors_gl518sm_exit); diff --git a/drivers/i2c/chips/gl520sm.c b/drivers/i2c/chips/gl520sm.c deleted file mode 100644 index a13a504f5bfa..000000000000 --- a/drivers/i2c/chips/gl520sm.c +++ /dev/null @@ -1,769 +0,0 @@ -/* - gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>, - Kyösti Mälkki <kmalkki@cc.hut.fi> - Copyright (c) 2005 Maarten Deprez <maartendeprez@users.sourceforge.net> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> - -/* Type of the extra sensor */ -static unsigned short extra_sensor_type; -module_param(extra_sensor_type, ushort, 0); -MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)"); - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(gl520sm); - -/* Many GL520 constants specified below -One of the inputs can be configured as either temp or voltage. -That's why _TEMP2 and _IN4 access the same register -*/ - -/* The GL520 registers */ -#define GL520_REG_CHIP_ID 0x00 -#define GL520_REG_REVISION 0x01 -#define GL520_REG_CONF 0x03 -#define GL520_REG_MASK 0x11 - -#define GL520_REG_VID_INPUT 0x02 - -#define GL520_REG_IN0_INPUT 0x15 -#define GL520_REG_IN0_LIMIT 0x0c -#define GL520_REG_IN0_MIN GL520_REG_IN0_LIMIT -#define GL520_REG_IN0_MAX GL520_REG_IN0_LIMIT - -#define GL520_REG_IN1_INPUT 0x14 -#define GL520_REG_IN1_LIMIT 0x09 -#define GL520_REG_IN1_MIN GL520_REG_IN1_LIMIT -#define GL520_REG_IN1_MAX GL520_REG_IN1_LIMIT - -#define GL520_REG_IN2_INPUT 0x13 -#define GL520_REG_IN2_LIMIT 0x0a -#define GL520_REG_IN2_MIN GL520_REG_IN2_LIMIT -#define GL520_REG_IN2_MAX GL520_REG_IN2_LIMIT - -#define GL520_REG_IN3_INPUT 0x0d -#define GL520_REG_IN3_LIMIT 0x0b -#define GL520_REG_IN3_MIN GL520_REG_IN3_LIMIT -#define GL520_REG_IN3_MAX GL520_REG_IN3_LIMIT - -#define GL520_REG_IN4_INPUT 0x0e -#define GL520_REG_IN4_MAX 0x17 -#define GL520_REG_IN4_MIN 0x18 - -#define GL520_REG_TEMP1_INPUT 0x04 -#define GL520_REG_TEMP1_MAX 0x05 -#define GL520_REG_TEMP1_MAX_HYST 0x06 - -#define GL520_REG_TEMP2_INPUT 0x0e -#define GL520_REG_TEMP2_MAX 0x17 -#define GL520_REG_TEMP2_MAX_HYST 0x18 - -#define GL520_REG_FAN_INPUT 0x07 -#define GL520_REG_FAN_MIN 0x08 -#define GL520_REG_FAN_DIV 0x0f -#define GL520_REG_FAN_OFF GL520_REG_FAN_DIV - -#define GL520_REG_ALARMS 0x12 -#define GL520_REG_BEEP_MASK 0x10 -#define GL520_REG_BEEP_ENABLE GL520_REG_CONF - -/* - * Function declarations - */ - -static int gl520_attach_adapter(struct i2c_adapter *adapter); -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind); -static void gl520_init_client(struct i2c_client *client); -static int gl520_detach_client(struct i2c_client *client); -static int gl520_read_value(struct i2c_client *client, u8 reg); -static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value); -static struct gl520_data *gl520_update_device(struct device *dev); - -/* Driver data */ -static struct i2c_driver gl520_driver = { - .owner = THIS_MODULE, - .name = "gl520sm", - .id = I2C_DRIVERID_GL520, - .flags = I2C_DF_NOTIFY, - .attach_adapter = gl520_attach_adapter, - .detach_client = gl520_detach_client, -}; - -/* Client data */ -struct gl520_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until the following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - u8 vid; - u8 vrm; - u8 in_input[5]; /* [0] = VVD */ - u8 in_min[5]; /* [0] = VDD */ - u8 in_max[5]; /* [0] = VDD */ - u8 fan_input[2]; - u8 fan_min[2]; - u8 fan_div[2]; - u8 fan_off; - u8 temp_input[2]; - u8 temp_max[2]; - u8 temp_max_hyst[2]; - u8 alarms; - u8 beep_enable; - u8 beep_mask; - u8 alarm_mask; - u8 two_temps; -}; - -/* - * Sysfs stuff - */ - -#define sysfs_r(type, n, item, reg) \ -static ssize_t get_##type##item (struct gl520_data *, char *, int); \ -static ssize_t get_##type##n##item (struct device *, struct device_attribute *attr, char *); \ -static ssize_t get_##type##n##item (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct gl520_data *data = gl520_update_device(dev); \ - return get_##type##item(data, buf, (n)); \ -} - -#define sysfs_w(type, n, item, reg) \ -static ssize_t set_##type##item (struct i2c_client *, struct gl520_data *, const char *, size_t, int, int); \ -static ssize_t set_##type##n##item (struct device *, struct device_attribute *attr, const char *, size_t); \ -static ssize_t set_##type##n##item (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct gl520_data *data = i2c_get_clientdata(client); \ - return set_##type##item(client, data, buf, count, (n), reg); \ -} - -#define sysfs_rw_n(type, n, item, reg) \ -sysfs_r(type, n, item, reg) \ -sysfs_w(type, n, item, reg) \ -static DEVICE_ATTR(type##n##item, S_IRUGO | S_IWUSR, get_##type##n##item, set_##type##n##item); - -#define sysfs_ro_n(type, n, item, reg) \ -sysfs_r(type, n, item, reg) \ -static DEVICE_ATTR(type##n##item, S_IRUGO, get_##type##n##item, NULL); - -#define sysfs_rw(type, item, reg) \ -sysfs_r(type, 0, item, reg) \ -sysfs_w(type, 0, item, reg) \ -static DEVICE_ATTR(type##item, S_IRUGO | S_IWUSR, get_##type##0##item, set_##type##0##item); - -#define sysfs_ro(type, item, reg) \ -sysfs_r(type, 0, item, reg) \ -static DEVICE_ATTR(type##item, S_IRUGO, get_##type##0##item, NULL); - - -#define sysfs_vid(n) \ -sysfs_ro_n(cpu, n, _vid, GL520_REG_VID_INPUT) - -#define device_create_file_vid(client, n) \ -device_create_file(&client->dev, &dev_attr_cpu##n##_vid) - -#define sysfs_in(n) \ -sysfs_ro_n(in, n, _input, GL520_REG_IN##n##INPUT) \ -sysfs_rw_n(in, n, _min, GL520_REG_IN##n##_MIN) \ -sysfs_rw_n(in, n, _max, GL520_REG_IN##n##_MAX) \ - -#define device_create_file_in(client, n) \ -({device_create_file(&client->dev, &dev_attr_in##n##_input); \ -device_create_file(&client->dev, &dev_attr_in##n##_min); \ -device_create_file(&client->dev, &dev_attr_in##n##_max);}) - -#define sysfs_fan(n) \ -sysfs_ro_n(fan, n, _input, GL520_REG_FAN_INPUT) \ -sysfs_rw_n(fan, n, _min, GL520_REG_FAN_MIN) \ -sysfs_rw_n(fan, n, _div, GL520_REG_FAN_DIV) - -#define device_create_file_fan(client, n) \ -({device_create_file(&client->dev, &dev_attr_fan##n##_input); \ -device_create_file(&client->dev, &dev_attr_fan##n##_min); \ -device_create_file(&client->dev, &dev_attr_fan##n##_div);}) - -#define sysfs_fan_off(n) \ -sysfs_rw_n(fan, n, _off, GL520_REG_FAN_OFF) \ - -#define device_create_file_fan_off(client, n) \ -device_create_file(&client->dev, &dev_attr_fan##n##_off) - -#define sysfs_temp(n) \ -sysfs_ro_n(temp, n, _input, GL520_REG_TEMP##n##_INPUT) \ -sysfs_rw_n(temp, n, _max, GL520_REG_TEMP##n##_MAX) \ -sysfs_rw_n(temp, n, _max_hyst, GL520_REG_TEMP##n##_MAX_HYST) - -#define device_create_file_temp(client, n) \ -({device_create_file(&client->dev, &dev_attr_temp##n##_input); \ -device_create_file(&client->dev, &dev_attr_temp##n##_max); \ -device_create_file(&client->dev, &dev_attr_temp##n##_max_hyst);}) - -#define sysfs_alarms() \ -sysfs_ro(alarms, , GL520_REG_ALARMS) \ -sysfs_rw(beep_enable, , GL520_REG_BEEP_ENABLE) \ -sysfs_rw(beep_mask, , GL520_REG_BEEP_MASK) - -#define device_create_file_alarms(client) \ -({device_create_file(&client->dev, &dev_attr_alarms); \ -device_create_file(&client->dev, &dev_attr_beep_enable); \ -device_create_file(&client->dev, &dev_attr_beep_mask);}) - - -sysfs_vid(0) - -sysfs_in(0) -sysfs_in(1) -sysfs_in(2) -sysfs_in(3) -sysfs_in(4) - -sysfs_fan(1) -sysfs_fan(2) -sysfs_fan_off(1) - -sysfs_temp(1) -sysfs_temp(2) - -sysfs_alarms() - - -static ssize_t get_cpu_vid(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); -} - -#define VDD_FROM_REG(val) (((val)*95+2)/4) -#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255)) - -#define IN_FROM_REG(val) ((val)*19) -#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255)) - -static ssize_t get_in_input(struct gl520_data *data, char *buf, int n) -{ - u8 r = data->in_input[n]; - - if (n == 0) - return sprintf(buf, "%d\n", VDD_FROM_REG(r)); - else - return sprintf(buf, "%d\n", IN_FROM_REG(r)); -} - -static ssize_t get_in_min(struct gl520_data *data, char *buf, int n) -{ - u8 r = data->in_min[n]; - - if (n == 0) - return sprintf(buf, "%d\n", VDD_FROM_REG(r)); - else - return sprintf(buf, "%d\n", IN_FROM_REG(r)); -} - -static ssize_t get_in_max(struct gl520_data *data, char *buf, int n) -{ - u8 r = data->in_max[n]; - - if (n == 0) - return sprintf(buf, "%d\n", VDD_FROM_REG(r)); - else - return sprintf(buf, "%d\n", IN_FROM_REG(r)); -} - -static ssize_t set_in_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - long v = simple_strtol(buf, NULL, 10); - u8 r; - - down(&data->update_lock); - - if (n == 0) - r = VDD_TO_REG(v); - else - r = IN_TO_REG(v); - - data->in_min[n] = r; - - if (n < 4) - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r); - else - gl520_write_value(client, reg, r); - - up(&data->update_lock); - return count; -} - -static ssize_t set_in_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - long v = simple_strtol(buf, NULL, 10); - u8 r; - - if (n == 0) - r = VDD_TO_REG(v); - else - r = IN_TO_REG(v); - - down(&data->update_lock); - - data->in_max[n] = r; - - if (n < 4) - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8)); - else - gl520_write_value(client, reg, r); - - up(&data->update_lock); - return count; -} - -#define DIV_FROM_REG(val) (1 << (val)) -#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (480000/((val) << (div)))) -#define FAN_TO_REG(val,div) ((val)<=0?0:SENSORS_LIMIT((480000 + ((val) << ((div)-1))) / ((val) << (div)), 1, 255)); - -static ssize_t get_fan_input(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n - 1], data->fan_div[n - 1])); -} - -static ssize_t get_fan_min(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n - 1], data->fan_div[n - 1])); -} - -static ssize_t get_fan_div(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n - 1])); -} - -static ssize_t get_fan_off(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", data->fan_off); -} - -static ssize_t set_fan_min(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - u8 r; - - down(&data->update_lock); - r = FAN_TO_REG(v, data->fan_div[n - 1]); - data->fan_min[n - 1] = r; - - if (n == 1) - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff00) | (r << 8)); - else - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xff) | r); - - data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); - if (data->fan_min[n - 1] == 0) - data->alarm_mask &= (n == 1) ? ~0x20 : ~0x40; - else - data->alarm_mask |= (n == 1) ? 0x20 : 0x40; - data->beep_mask &= data->alarm_mask; - gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); - - up(&data->update_lock); - return count; -} - -static ssize_t set_fan_div(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - unsigned long v = simple_strtoul(buf, NULL, 10); - u8 r; - - switch (v) { - case 1: r = 0; break; - case 2: r = 1; break; - case 4: r = 2; break; - case 8: r = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v); - return -EINVAL; - } - - down(&data->update_lock); - data->fan_div[n - 1] = r; - - if (n == 1) - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0xc0) | (r << 6)); - else - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x30) | (r << 4)); - - up(&data->update_lock); - return count; -} - -static ssize_t set_fan_off(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - u8 r = simple_strtoul(buf, NULL, 10)?1:0; - - down(&data->update_lock); - data->fan_off = r; - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x0c) | (r << 2)); - up(&data->update_lock); - return count; -} - -#define TEMP_FROM_REG(val) (((val) - 130) * 1000) -#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0?(val)-500:(val)+500) / 1000)+130),0,255)) - -static ssize_t get_temp_input(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n - 1])); -} - -static ssize_t get_temp_max(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n - 1])); -} - -static ssize_t get_temp_max_hyst(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n - 1])); -} - -static ssize_t set_temp_max(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - long v = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_max[n - 1] = TEMP_TO_REG(v);; - gl520_write_value(client, reg, data->temp_max[n - 1]); - up(&data->update_lock); - return count; -} - -static ssize_t set_temp_max_hyst(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - long v = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_max_hyst[n - 1] = TEMP_TO_REG(v); - gl520_write_value(client, reg, data->temp_max_hyst[n - 1]); - up(&data->update_lock); - return count; -} - -static ssize_t get_alarms(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", data->alarms); -} - -static ssize_t get_beep_enable(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", data->beep_enable); -} - -static ssize_t get_beep_mask(struct gl520_data *data, char *buf, int n) -{ - return sprintf(buf, "%d\n", data->beep_mask); -} - -static ssize_t set_beep_enable(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - u8 r = simple_strtoul(buf, NULL, 10)?0:1; - - down(&data->update_lock); - data->beep_enable = !r; - gl520_write_value(client, reg, (gl520_read_value(client, reg) & ~0x04) | (r << 2)); - up(&data->update_lock); - return count; -} - -static ssize_t set_beep_mask(struct i2c_client *client, struct gl520_data *data, const char *buf, size_t count, int n, int reg) -{ - u8 r = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - r &= data->alarm_mask; - data->beep_mask = r; - gl520_write_value(client, reg, r); - up(&data->update_lock); - return count; -} - - -/* - * Real code - */ - -static int gl520_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, gl520_detect); -} - -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct gl520_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access gl520_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct gl520_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct gl520_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &gl520_driver; - new_client->flags = 0; - - /* Determine the chip type. */ - if (kind < 0) { - if ((gl520_read_value(new_client, GL520_REG_CHIP_ID) != 0x20) || - ((gl520_read_value(new_client, GL520_REG_REVISION) & 0x7f) != 0x00) || - ((gl520_read_value(new_client, GL520_REG_CONF) & 0x80) != 0x00)) { - dev_dbg(&new_client->dev, "Unknown chip type, skipping\n"); - goto exit_free; - } - } - - /* Fill in the remaining client fields */ - strlcpy(new_client->name, "gl520sm", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the GL520SM chip */ - gl520_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file_vid(new_client, 0); - - device_create_file_in(new_client, 0); - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - if (!data->two_temps) - device_create_file_in(new_client, 4); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan_off(new_client, 1); - - device_create_file_temp(new_client, 1); - if (data->two_temps) - device_create_file_temp(new_client, 2); - - device_create_file_alarms(new_client); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - - -/* Called when we have found a new GL520SM. */ -static void gl520_init_client(struct i2c_client *client) -{ - struct gl520_data *data = i2c_get_clientdata(client); - u8 oldconf, conf; - - conf = oldconf = gl520_read_value(client, GL520_REG_CONF); - - data->alarm_mask = 0xff; - data->vrm = i2c_which_vrm(); - - if (extra_sensor_type == 1) - conf &= ~0x10; - else if (extra_sensor_type == 2) - conf |= 0x10; - data->two_temps = !(conf & 0x10); - - /* If IRQ# is disabled, we can safely force comparator mode */ - if (!(conf & 0x20)) - conf &= 0xf7; - - /* Enable monitoring if needed */ - conf |= 0x40; - - if (conf != oldconf) - gl520_write_value(client, GL520_REG_CONF, conf); - - gl520_update_device(&(client->dev)); - - if (data->fan_min[0] == 0) - data->alarm_mask &= ~0x20; - if (data->fan_min[1] == 0) - data->alarm_mask &= ~0x40; - - data->beep_mask &= data->alarm_mask; - gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); -} - -static int gl520_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - - -/* Registers 0x07 to 0x0c are word-sized, others are byte-sized - GL520 uses a high-byte first convention */ -static int gl520_read_value(struct i2c_client *client, u8 reg) -{ - if ((reg >= 0x07) && (reg <= 0x0c)) - return swab16(i2c_smbus_read_word_data(client, reg)); - else - return i2c_smbus_read_byte_data(client, reg); -} - -static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if ((reg >= 0x07) && (reg <= 0x0c)) - return i2c_smbus_write_word_data(client, reg, swab16(value)); - else - return i2c_smbus_write_byte_data(client, reg, value); -} - - -static struct gl520_data *gl520_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct gl520_data *data = i2c_get_clientdata(client); - int val; - - down(&data->update_lock); - - if ((jiffies - data->last_updated > 2 * HZ) || - (jiffies < data->last_updated) || !data->valid) { - - dev_dbg(&client->dev, "Starting gl520sm update\n"); - - data->alarms = gl520_read_value(client, GL520_REG_ALARMS); - data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); - data->vid = gl520_read_value(client, GL520_REG_VID_INPUT) & 0x1f; - - val = gl520_read_value(client, GL520_REG_IN0_LIMIT); - data->in_min[0] = val & 0xff; - data->in_max[0] = (val >> 8) & 0xff; - val = gl520_read_value(client, GL520_REG_IN1_LIMIT); - data->in_min[1] = val & 0xff; - data->in_max[1] = (val >> 8) & 0xff; - val = gl520_read_value(client, GL520_REG_IN2_LIMIT); - data->in_min[2] = val & 0xff; - data->in_max[2] = (val >> 8) & 0xff; - val = gl520_read_value(client, GL520_REG_IN3_LIMIT); - data->in_min[3] = val & 0xff; - data->in_max[3] = (val >> 8) & 0xff; - - val = gl520_read_value(client, GL520_REG_FAN_INPUT); - data->fan_input[0] = (val >> 8) & 0xff; - data->fan_input[1] = val & 0xff; - - val = gl520_read_value(client, GL520_REG_FAN_MIN); - data->fan_min[0] = (val >> 8) & 0xff; - data->fan_min[1] = val & 0xff; - - data->temp_input[0] = gl520_read_value(client, GL520_REG_TEMP1_INPUT); - data->temp_max[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX); - data->temp_max_hyst[0] = gl520_read_value(client, GL520_REG_TEMP1_MAX_HYST); - - val = gl520_read_value(client, GL520_REG_FAN_DIV); - data->fan_div[0] = (val >> 6) & 0x03; - data->fan_div[1] = (val >> 4) & 0x03; - data->fan_off = (val >> 2) & 0x01; - - data->alarms &= data->alarm_mask; - - val = gl520_read_value(client, GL520_REG_CONF); - data->beep_enable = !((val >> 2) & 1); - - data->in_input[0] = gl520_read_value(client, GL520_REG_IN0_INPUT); - data->in_input[1] = gl520_read_value(client, GL520_REG_IN1_INPUT); - data->in_input[2] = gl520_read_value(client, GL520_REG_IN2_INPUT); - data->in_input[3] = gl520_read_value(client, GL520_REG_IN3_INPUT); - - /* Temp1 and Vin4 are the same input */ - if (data->two_temps) { - data->temp_input[1] = gl520_read_value(client, GL520_REG_TEMP2_INPUT); - data->temp_max[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX); - data->temp_max_hyst[1] = gl520_read_value(client, GL520_REG_TEMP2_MAX_HYST); - } else { - data->in_input[4] = gl520_read_value(client, GL520_REG_IN4_INPUT); - data->in_min[4] = gl520_read_value(client, GL520_REG_IN4_MIN); - data->in_max[4] = gl520_read_value(client, GL520_REG_IN4_MAX); - } - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - - -static int __init sensors_gl520sm_init(void) -{ - return i2c_add_driver(&gl520_driver); -} - -static void __exit sensors_gl520sm_exit(void) -{ - i2c_del_driver(&gl520_driver); -} - - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " - "Kyösti Mälkki <kmalkki@cc.hut.fi>, " - "Maarten Deprez <maartendeprez@users.sourceforge.net>"); -MODULE_DESCRIPTION("GL520SM driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_gl520sm_init); -module_exit(sensors_gl520sm_exit); diff --git a/drivers/i2c/chips/it87.c b/drivers/i2c/chips/it87.c deleted file mode 100644 index db20c9e47393..000000000000 --- a/drivers/i2c/chips/it87.c +++ /dev/null @@ -1,1184 +0,0 @@ -/* - it87.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring. - - Supports: IT8705F Super I/O chip w/LPC interface & SMBus - IT8712F Super I/O chip w/LPC interface & SMBus - Sis950 A clone of the IT8705F - - Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> - Largely inspired by lm78.c of the same package - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - djg@pdp8.net David Gesswein 7/18/01 - Modified to fix bug with not all alarms enabled. - Added ability to read battery voltage and select temperature sensor - type at module load time. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> -#include <linux/hwmon-sysfs.h> -#include <asm/io.h> - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, - 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_2(it87, it8712); - -#define REG 0x2e /* The register to read/write */ -#define DEV 0x07 /* Register: Logical device select */ -#define VAL 0x2f /* The value to read/write */ -#define PME 0x04 /* The device with the fan registers in it */ -#define DEVID 0x20 /* Register: Device ID */ -#define DEVREV 0x22 /* Register: Device Revision */ - -static inline int -superio_inb(int reg) -{ - outb(reg, REG); - return inb(VAL); -} - -static int superio_inw(int reg) -{ - int val; - outb(reg++, REG); - val = inb(VAL) << 8; - outb(reg, REG); - val |= inb(VAL); - return val; -} - -static inline void -superio_select(void) -{ - outb(DEV, REG); - outb(PME, VAL); -} - -static inline void -superio_enter(void) -{ - outb(0x87, REG); - outb(0x01, REG); - outb(0x55, REG); - outb(0x55, REG); -} - -static inline void -superio_exit(void) -{ - outb(0x02, REG); - outb(0x02, VAL); -} - -#define IT8712F_DEVID 0x8712 -#define IT8705F_DEVID 0x8705 -#define IT87_ACT_REG 0x30 -#define IT87_BASE_REG 0x60 - -/* Update battery voltage after every reading if true */ -static int update_vbat; - -/* Not all BIOSes properly configure the PWM registers */ -static int fix_pwm_polarity; - -/* Chip Type */ - -static u16 chip_type; - -/* Many IT87 constants specified below */ - -/* Length of ISA address segment */ -#define IT87_EXTENT 8 - -/* Where are the ISA address/data registers relative to the base address */ -#define IT87_ADDR_REG_OFFSET 5 -#define IT87_DATA_REG_OFFSET 6 - -/*----- The IT87 registers -----*/ - -#define IT87_REG_CONFIG 0x00 - -#define IT87_REG_ALARM1 0x01 -#define IT87_REG_ALARM2 0x02 -#define IT87_REG_ALARM3 0x03 - -#define IT87_REG_VID 0x0a -#define IT87_REG_FAN_DIV 0x0b - -/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */ - -#define IT87_REG_FAN(nr) (0x0d + (nr)) -#define IT87_REG_FAN_MIN(nr) (0x10 + (nr)) -#define IT87_REG_FAN_MAIN_CTRL 0x13 -#define IT87_REG_FAN_CTL 0x14 -#define IT87_REG_PWM(nr) (0x15 + (nr)) - -#define IT87_REG_VIN(nr) (0x20 + (nr)) -#define IT87_REG_TEMP(nr) (0x29 + (nr)) - -#define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2) -#define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2) -#define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2) -#define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2) - -#define IT87_REG_I2C_ADDR 0x48 - -#define IT87_REG_VIN_ENABLE 0x50 -#define IT87_REG_TEMP_ENABLE 0x51 - -#define IT87_REG_CHIPID 0x58 - -#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255)) -#define IN_FROM_REG(val) ((val) * 16) - -static inline u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm == 0) - return 255; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, - 254); -} - -#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) - -#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ - ((val)+500)/1000),-128,127)) -#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) - -#define PWM_TO_REG(val) ((val) >> 1) -#define PWM_FROM_REG(val) (((val)&0x7f) << 1) - -static int DIV_TO_REG(int val) -{ - int answer = 0; - while ((val >>= 1) != 0) - answer++; - return answer; -} -#define DIV_FROM_REG(val) (1 << (val)) - - -/* For each registered IT87, we need to keep some data in memory. That - data is pointed to by it87_list[NR]->data. The structure itself is - dynamically allocated, at the same time when a new it87 client is - allocated. */ -struct it87_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 in[9]; /* Register value */ - u8 in_max[9]; /* Register value */ - u8 in_min[9]; /* Register value */ - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ - u8 temp[3]; /* Register value */ - u8 temp_high[3]; /* Register value */ - u8 temp_low[3]; /* Register value */ - u8 sensor; /* Register value */ - u8 fan_div[3]; /* Register encoding, shifted right */ - u8 vid; /* Register encoding, combined */ - int vrm; - u32 alarms; /* Register encoding, combined */ - u8 fan_main_ctrl; /* Register value */ - u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ -}; - - -static int it87_attach_adapter(struct i2c_adapter *adapter); -static int it87_find(int *address); -static int it87_detect(struct i2c_adapter *adapter, int address, int kind); -static int it87_detach_client(struct i2c_client *client); - -static int it87_read_value(struct i2c_client *client, u8 register); -static int it87_write_value(struct i2c_client *client, u8 register, - u8 value); -static struct it87_data *it87_update_device(struct device *dev); -static int it87_check_pwm(struct i2c_client *client); -static void it87_init_client(struct i2c_client *client, struct it87_data *data); - - -static struct i2c_driver it87_driver = { - .owner = THIS_MODULE, - .name = "it87", - .id = I2C_DRIVERID_IT87, - .flags = I2C_DF_NOTIFY, - .attach_adapter = it87_attach_adapter, - .detach_client = it87_detach_client, -}; - -static ssize_t show_in(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); -} - -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); -} - -static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); -} - -static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val); - it87_write_value(client, IT87_REG_VIN_MIN(nr), - data->in_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val); - it87_write_value(client, IT87_REG_VIN_MAX(nr), - data->in_max[nr]); - up(&data->update_lock); - return count; -} - -#define show_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in, NULL, offset); - -#define limit_in_offset(offset) \ -static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_min, set_in_min, offset); \ -static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_max, set_in_max, offset); - -show_in_offset(0); -limit_in_offset(0); -show_in_offset(1); -limit_in_offset(1); -show_in_offset(2); -limit_in_offset(2); -show_in_offset(3); -limit_in_offset(3); -show_in_offset(4); -limit_in_offset(4); -show_in_offset(5); -limit_in_offset(5); -show_in_offset(6); -limit_in_offset(6); -show_in_offset(7); -limit_in_offset(7); -show_in_offset(8); - -/* 3 temperatures */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); -} -static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); -} -static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr])); -} -static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_high[nr] = TEMP_TO_REG(val); - it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_low[nr] = TEMP_TO_REG(val); - it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); - up(&data->update_lock); - return count; -} -#define show_temp_offset(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); \ -static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_min, set_temp_min, offset - 1); - -show_temp_offset(1); -show_temp_offset(2); -show_temp_offset(3); - -static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - u8 reg = data->sensor; /* In case the value is updated while we use it */ - - if (reg & (1 << nr)) - return sprintf(buf, "3\n"); /* thermal diode */ - if (reg & (8 << nr)) - return sprintf(buf, "2\n"); /* thermistor */ - return sprintf(buf, "0\n"); /* disabled */ -} -static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - - data->sensor &= ~(1 << nr); - data->sensor &= ~(8 << nr); - /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ - if (val == 3) - data->sensor |= 1 << nr; - else if (val == 2) - data->sensor |= 8 << nr; - else if (val != 0) { - up(&data->update_lock); - return -EINVAL; - } - it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor); - up(&data->update_lock); - return count; -} -#define show_sensor_offset(offset) \ -static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ - show_sensor, set_sensor, offset - 1); - -show_sensor_offset(1); -show_sensor_offset(2); -show_sensor_offset(3); - -/* 3 Fans */ -static ssize_t show_fan(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr]))); -} -static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", - FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); -} -static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); -} -static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0); -} -static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct it87_data *data = it87_update_device(dev); - return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]); -} -static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - int i, min[3]; - u8 old; - - down(&data->update_lock); - old = it87_read_value(client, IT87_REG_FAN_DIV); - - for (i = 0; i < 3; i++) - min[i] = FAN_FROM_REG(data->fan_min[i], DIV_FROM_REG(data->fan_div[i])); - - switch (nr) { - case 0: - case 1: - data->fan_div[nr] = DIV_TO_REG(val); - break; - case 2: - if (val < 8) - data->fan_div[nr] = 1; - else - data->fan_div[nr] = 3; - } - val = old & 0x80; - val |= (data->fan_div[0] & 0x07); - val |= (data->fan_div[1] & 0x07) << 3; - if (data->fan_div[2] == 3) - val |= 0x1 << 6; - it87_write_value(client, IT87_REG_FAN_DIV, val); - - for (i = 0; i < 3; i++) { - data->fan_min[i]=FAN_TO_REG(min[i], DIV_FROM_REG(data->fan_div[i])); - it87_write_value(client, IT87_REG_FAN_MIN(i), data->fan_min[i]); - } - up(&data->update_lock); - return count; -} -static ssize_t set_pwm_enable(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - - if (val == 0) { - int tmp; - /* make sure the fan is on when in on/off mode */ - tmp = it87_read_value(client, IT87_REG_FAN_CTL); - it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr)); - /* set on/off mode */ - data->fan_main_ctrl &= ~(1 << nr); - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - } else if (val == 1) { - /* set SmartGuardian mode */ - data->fan_main_ctrl |= (1 << nr); - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - /* set saved pwm value, clear FAN_CTLX PWM mode bit */ - it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); - } else { - up(&data->update_lock); - return -EINVAL; - } - - up(&data->update_lock); - return count; -} -static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; - - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - if (val < 0 || val > 255) - return -EINVAL; - - down(&data->update_lock); - data->manual_pwm_ctl[nr] = val; - if (data->fan_main_ctrl & (1 << nr)) - it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan, NULL, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_min, set_fan_min, offset - 1); \ -static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_div, set_fan_div, offset - 1); - -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); - -#define show_pwm_offset(offset) \ -static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_pwm_enable, set_pwm_enable, offset - 1); \ -static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm, set_pwm, offset - 1); - -show_pwm_offset(1); -show_pwm_offset(2); -show_pwm_offset(3); - -/* Alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -static ssize_t -show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->vrm); -} -static ssize_t -store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - data->vrm = val; - - return count; -} -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm) - -static ssize_t -show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct it87_data *data = it87_update_device(dev); - return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid) - -/* This function is called when: - * it87_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and it87_driver is still present) */ -static int it87_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, it87_detect); -} - -/* SuperIO detection - will change normal_isa[0] if a chip is found */ -static int it87_find(int *address) -{ - int err = -ENODEV; - - superio_enter(); - chip_type = superio_inw(DEVID); - if (chip_type != IT8712F_DEVID - && chip_type != IT8705F_DEVID) - goto exit; - - superio_select(); - if (!(superio_inb(IT87_ACT_REG) & 0x01)) { - pr_info("it87: Device not activated, skipping\n"); - goto exit; - } - - *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1); - if (*address == 0) { - pr_info("it87: Base address not set, skipping\n"); - goto exit; - } - - err = 0; - pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", - chip_type, *address, superio_inb(DEVREV) & 0x0f); - -exit: - superio_exit(); - return err; -} - -/* This function is called by i2c_detect */ -int it87_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i; - struct i2c_client *new_client; - struct it87_data *data; - int err = 0; - const char *name = ""; - int is_isa = i2c_is_isa_adapter(adapter); - int enable_pwm_interface; - - if (!is_isa && - !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto ERROR0; - - /* Reserve the ISA region */ - if (is_isa) - if (!request_region(address, IT87_EXTENT, it87_driver.name)) - goto ERROR0; - - /* Probe whether there is anything available on this address. Already - done for SMBus and Super-I/O clients */ - if (kind < 0) { - if (is_isa && !chip_type) { -#define REALLY_SLOW_IO - /* We need the timeouts for at least some IT87-like chips. But only - if we read 'undefined' registers. */ - i = inb_p(address + 1); - if (inb_p(address + 2) != i - || inb_p(address + 3) != i - || inb_p(address + 7) != i) { - err = -ENODEV; - goto ERROR1; - } -#undef REALLY_SLOW_IO - - /* Let's just hope nothing breaks here */ - i = inb_p(address + 5) & 0x7f; - outb_p(~i & 0x7f, address + 5); - if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { - outb_p(i, address + 5); - err = -ENODEV; - goto ERROR1; - } - } - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access it87_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct it87_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR1; - } - memset(data, 0, sizeof(struct it87_data)); - - new_client = &data->client; - if (is_isa) - init_MUTEX(&data->lock); - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &it87_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - if (kind < 0) { - if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80) - || (!is_isa - && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) { - err = -ENODEV; - goto ERROR2; - } - } - - /* Determine the chip type. */ - if (kind <= 0) { - i = it87_read_value(new_client, IT87_REG_CHIPID); - if (i == 0x90) { - kind = it87; - if ((is_isa) && (chip_type == IT8712F_DEVID)) - kind = it8712; - } - else { - if (kind == 0) - dev_info(&adapter->dev, - "Ignoring 'force' parameter for unknown chip at " - "adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - err = -ENODEV; - goto ERROR2; - } - } - - if (kind == it87) { - name = "it87"; - } else if (kind == it8712) { - name = "it8712"; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR2; - - /* Check PWM configuration */ - enable_pwm_interface = it87_check_pwm(new_client); - - /* Initialize the IT87 chip */ - it87_init_client(new_client, data); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &sensor_dev_attr_in0_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in8_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in0_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in4_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in5_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in6_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_in7_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp1_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp2_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_temp3_type.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_input.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_min.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan1_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan2_div.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_fan3_div.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); - if (enable_pwm_interface) { - device_create_file(&new_client->dev, &sensor_dev_attr_pwm1_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm2_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm3_enable.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm1.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm2.dev_attr); - device_create_file(&new_client->dev, &sensor_dev_attr_pwm3.dev_attr); - } - - if (data->type == it8712) { - data->vrm = i2c_which_vrm(); - device_create_file_vrm(new_client); - device_create_file_vid(new_client); - } - - return 0; - -ERROR2: - kfree(data); -ERROR1: - if (is_isa) - release_region(address, IT87_EXTENT); -ERROR0: - return err; -} - -static int it87_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - if(i2c_is_isa_client(client)) - release_region(client->addr, IT87_EXTENT); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -/* The SMBus locks itself, but ISA access must be locked explicitly! - We don't want to lock the whole ISA bus, so we lock each client - separately. - We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, - would slow down the IT87 access and should not be necessary. */ -static int it87_read_value(struct i2c_client *client, u8 reg) -{ - struct it87_data *data = i2c_get_clientdata(client); - - int res; - if (i2c_is_isa_client(client)) { - down(&data->lock); - outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); - res = inb_p(client->addr + IT87_DATA_REG_OFFSET); - up(&data->lock); - return res; - } else - return i2c_smbus_read_byte_data(client, reg); -} - -/* The SMBus locks itself, but ISA access muse be locked explicitly! - We don't want to lock the whole ISA bus, so we lock each client - separately. - We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, - would slow down the IT87 access and should not be necessary. */ -static int it87_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - struct it87_data *data = i2c_get_clientdata(client); - - if (i2c_is_isa_client(client)) { - down(&data->lock); - outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); - outb_p(value, client->addr + IT87_DATA_REG_OFFSET); - up(&data->lock); - return 0; - } else - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Return 1 if and only if the PWM interface is safe to use */ -static int it87_check_pwm(struct i2c_client *client) -{ - /* Some BIOSes fail to correctly configure the IT87 fans. All fans off - * and polarity set to active low is sign that this is the case so we - * disable pwm control to protect the user. */ - int tmp = it87_read_value(client, IT87_REG_FAN_CTL); - if ((tmp & 0x87) == 0) { - if (fix_pwm_polarity) { - /* The user asks us to attempt a chip reconfiguration. - * This means switching to active high polarity and - * inverting all fan speed values. */ - int i; - u8 pwm[3]; - - for (i = 0; i < 3; i++) - pwm[i] = it87_read_value(client, - IT87_REG_PWM(i)); - - /* If any fan is in automatic pwm mode, the polarity - * might be correct, as suspicious as it seems, so we - * better don't change anything (but still disable the - * PWM interface). */ - if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { - dev_info(&client->dev, "Reconfiguring PWM to " - "active high polarity\n"); - it87_write_value(client, IT87_REG_FAN_CTL, - tmp | 0x87); - for (i = 0; i < 3; i++) - it87_write_value(client, - IT87_REG_PWM(i), - 0x7f & ~pwm[i]); - return 1; - } - - dev_info(&client->dev, "PWM configuration is " - "too broken to be fixed\n"); - } - - dev_info(&client->dev, "Detected broken BIOS " - "defaults, disabling PWM interface\n"); - return 0; - } else if (fix_pwm_polarity) { - dev_info(&client->dev, "PWM configuration looks " - "sane, won't touch\n"); - } - - return 1; -} - -/* Called when we have found a new IT87. */ -static void it87_init_client(struct i2c_client *client, struct it87_data *data) -{ - int tmp, i; - - /* initialize to sane defaults: - * - if the chip is in manual pwm mode, this will be overwritten with - * the actual settings on the chip (so in this case, initialization - * is not needed) - * - if in automatic or on/off mode, we could switch to manual mode, - * read the registers and set manual_pwm_ctl accordingly, but currently - * this is not implemented, so we initialize to something sane */ - for (i = 0; i < 3; i++) { - data->manual_pwm_ctl[i] = 0xff; - } - - /* Check if temperature channnels are reset manually or by some reason */ - tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE); - if ((tmp & 0x3f) == 0) { - /* Temp1,Temp3=thermistor; Temp2=thermal diode */ - tmp = (tmp & 0xc0) | 0x2a; - it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp); - } - data->sensor = tmp; - - /* Check if voltage monitors are reset manually or by some reason */ - tmp = it87_read_value(client, IT87_REG_VIN_ENABLE); - if ((tmp & 0xff) == 0) { - /* Enable all voltage monitors */ - it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff); - } - - /* Check if tachometers are reset manually or by some reason */ - data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); - if ((data->fan_main_ctrl & 0x70) == 0) { - /* Enable all fan tachometers */ - data->fan_main_ctrl |= 0x70; - it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); - } - - /* Set current fan mode registers and the default settings for the - * other mode registers */ - for (i = 0; i < 3; i++) { - if (data->fan_main_ctrl & (1 << i)) { - /* pwm mode */ - tmp = it87_read_value(client, IT87_REG_PWM(i)); - if (tmp & 0x80) { - /* automatic pwm - not yet implemented, but - * leave the settings made by the BIOS alone - * until a change is requested via the sysfs - * interface */ - } else { - /* manual pwm */ - data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp); - } - } - } - - /* Start monitoring */ - it87_write_value(client, IT87_REG_CONFIG, - (it87_read_value(client, IT87_REG_CONFIG) & 0x36) - | (update_vbat ? 0x41 : 0x01)); -} - -static struct it87_data *it87_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct it87_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - if (update_vbat) { - /* Cleared after each update, so reenable. Value - returned by this read will be previous value */ - it87_write_value(client, IT87_REG_CONFIG, - it87_read_value(client, IT87_REG_CONFIG) | 0x40); - } - for (i = 0; i <= 7; i++) { - data->in[i] = - it87_read_value(client, IT87_REG_VIN(i)); - data->in_min[i] = - it87_read_value(client, IT87_REG_VIN_MIN(i)); - data->in_max[i] = - it87_read_value(client, IT87_REG_VIN_MAX(i)); - } - data->in[8] = - it87_read_value(client, IT87_REG_VIN(8)); - /* Temperature sensor doesn't have limit registers, set - to min and max value */ - data->in_min[8] = 0; - data->in_max[8] = 255; - - for (i = 0; i < 3; i++) { - data->fan[i] = - it87_read_value(client, IT87_REG_FAN(i)); - data->fan_min[i] = - it87_read_value(client, IT87_REG_FAN_MIN(i)); - } - for (i = 0; i < 3; i++) { - data->temp[i] = - it87_read_value(client, IT87_REG_TEMP(i)); - data->temp_high[i] = - it87_read_value(client, IT87_REG_TEMP_HIGH(i)); - data->temp_low[i] = - it87_read_value(client, IT87_REG_TEMP_LOW(i)); - } - - i = it87_read_value(client, IT87_REG_FAN_DIV); - data->fan_div[0] = i & 0x07; - data->fan_div[1] = (i >> 3) & 0x07; - data->fan_div[2] = (i & 0x40) ? 3 : 1; - - data->alarms = - it87_read_value(client, IT87_REG_ALARM1) | - (it87_read_value(client, IT87_REG_ALARM2) << 8) | - (it87_read_value(client, IT87_REG_ALARM3) << 16); - data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); - - data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE); - /* The 8705 does not have VID capability */ - if (data->type == it8712) { - data->vid = it87_read_value(client, IT87_REG_VID); - data->vid &= 0x1f; - } - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sm_it87_init(void) -{ - int addr; - - if (!it87_find(&addr)) { - normal_isa[0] = addr; - } - return i2c_add_driver(&it87_driver); -} - -static void __exit sm_it87_exit(void) -{ - i2c_del_driver(&it87_driver); -} - - -MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>"); -MODULE_DESCRIPTION("IT8705F, IT8712F, Sis950 driver"); -module_param(update_vbat, bool, 0); -MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); -module_param(fix_pwm_polarity, bool, 0); -MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)"); -MODULE_LICENSE("GPL"); - -module_init(sm_it87_init); -module_exit(sm_it87_exit); diff --git a/drivers/i2c/chips/lm63.c b/drivers/i2c/chips/lm63.c deleted file mode 100644 index 7c6f9ea5a254..000000000000 --- a/drivers/i2c/chips/lm63.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * lm63.c - driver for the National Semiconductor LM63 temperature sensor - * with integrated fan control - * Copyright (C) 2004-2005 Jean Delvare <khali@linux-fr.org> - * Based on the lm90 driver. - * - * The LM63 is a sensor chip made by National Semiconductor. It measures - * two temperatures (its own and one external one) and the speed of one - * fan, those speed it can additionally control. Complete datasheet can be - * obtained from National's website at: - * http://www.national.com/pf/LM/LM63.html - * - * The LM63 is basically an LM86 with fan speed monitoring and control - * capabilities added. It misses some of the LM86 features though: - * - No low limit for local temperature. - * - No critical limit for local temperature. - * - Critical limit for remote temperature can be changed only once. We - * will consider that the critical limit is read-only. - * - * The datasheet isn't very clear about what the tachometer reading is. - * I had a explanation from National Semiconductor though. The two lower - * bits of the read value have to be masked out. The value is still 16 bit - * in width. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/hwmon-sysfs.h> - -/* - * Addresses to scan - * Address is fully defined internally and cannot be changed. - */ - -static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(lm63); - -/* - * The LM63 registers - */ - -#define LM63_REG_CONFIG1 0x03 -#define LM63_REG_CONFIG2 0xBF -#define LM63_REG_CONFIG_FAN 0x4A - -#define LM63_REG_TACH_COUNT_MSB 0x47 -#define LM63_REG_TACH_COUNT_LSB 0x46 -#define LM63_REG_TACH_LIMIT_MSB 0x49 -#define LM63_REG_TACH_LIMIT_LSB 0x48 - -#define LM63_REG_PWM_VALUE 0x4C -#define LM63_REG_PWM_FREQ 0x4D - -#define LM63_REG_LOCAL_TEMP 0x00 -#define LM63_REG_LOCAL_HIGH 0x05 - -#define LM63_REG_REMOTE_TEMP_MSB 0x01 -#define LM63_REG_REMOTE_TEMP_LSB 0x10 -#define LM63_REG_REMOTE_OFFSET_MSB 0x11 -#define LM63_REG_REMOTE_OFFSET_LSB 0x12 -#define LM63_REG_REMOTE_HIGH_MSB 0x07 -#define LM63_REG_REMOTE_HIGH_LSB 0x13 -#define LM63_REG_REMOTE_LOW_MSB 0x08 -#define LM63_REG_REMOTE_LOW_LSB 0x14 -#define LM63_REG_REMOTE_TCRIT 0x19 -#define LM63_REG_REMOTE_TCRIT_HYST 0x21 - -#define LM63_REG_ALERT_STATUS 0x02 -#define LM63_REG_ALERT_MASK 0x16 - -#define LM63_REG_MAN_ID 0xFE -#define LM63_REG_CHIP_ID 0xFF - -/* - * Conversions and various macros - * For tachometer counts, the LM63 uses 16-bit values. - * For local temperature and high limit, remote critical limit and hysteresis - * value, it uses signed 8-bit values with LSB = 1 degree Celsius. - * For remote temperature, low and high limits, it uses signed 11-bit values - * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers. - */ - -#define FAN_FROM_REG(reg) ((reg) == 0xFFFC || (reg) == 0 ? 0 : \ - 5400000 / (reg)) -#define FAN_TO_REG(val) ((val) <= 82 ? 0xFFFC : \ - (5400000 / (val)) & 0xFFFC) -#define TEMP8_FROM_REG(reg) ((reg) * 1000) -#define TEMP8_TO_REG(val) ((val) <= -128000 ? -128 : \ - (val) >= 127000 ? 127 : \ - (val) < 0 ? ((val) - 500) / 1000 : \ - ((val) + 500) / 1000) -#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) -#define TEMP11_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ - (val) >= 127875 ? 0x7FE0 : \ - (val) < 0 ? ((val) - 62) / 125 * 32 : \ - ((val) + 62) / 125 * 32) -#define HYST_TO_REG(val) ((val) <= 0 ? 0 : \ - (val) >= 127000 ? 127 : \ - ((val) + 500) / 1000) - -/* - * Functions declaration - */ - -static int lm63_attach_adapter(struct i2c_adapter *adapter); -static int lm63_detach_client(struct i2c_client *client); - -static struct lm63_data *lm63_update_device(struct device *dev); - -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm63_init_client(struct i2c_client *client); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver lm63_driver = { - .owner = THIS_MODULE, - .name = "lm63", - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm63_attach_adapter, - .detach_client = lm63_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct lm63_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - u8 config, config_fan; - u16 fan[2]; /* 0: input - 1: low limit */ - u8 pwm1_freq; - u8 pwm1_value; - s8 temp8[3]; /* 0: local input - 1: local high limit - 2: remote critical limit */ - s16 temp11[3]; /* 0: remote input - 1: remote low limit - 2: remote high limit */ - u8 temp2_crit_hyst; - u8 alarms; -}; - -/* - * Sysfs callback functions and files - */ - -static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); -} - -static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan[1] = FAN_TO_REG(val); - i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, - data->fan[1] & 0xFF); - i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, - data->fan[1] >> 8); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm1(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", data->pwm1_value >= 2 * data->pwm1_freq ? - 255 : (data->pwm1_value * 255 + data->pwm1_freq) / - (2 * data->pwm1_freq)); -} - -static ssize_t set_pwm1(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - unsigned long val; - - if (!(data->config_fan & 0x20)) /* register is read-only */ - return -EPERM; - - val = simple_strtoul(buf, NULL, 10); - down(&data->update_lock); - data->pwm1_value = val <= 0 ? 0 : - val >= 255 ? 2 * data->pwm1_freq : - (val * data->pwm1_freq * 2 + 127) / 255; - i2c_smbus_write_byte_data(client, LM63_REG_PWM_VALUE, data->pwm1_value); - up(&data->update_lock); - return count; -} - -static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); -} - -static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); -} - -static ssize_t set_temp8(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp8[1] = TEMP8_TO_REG(val); - i2c_smbus_write_byte_data(client, LM63_REG_LOCAL_HIGH, data->temp8[1]); - up(&data->update_lock); - return count; -} - -static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[attr->index])); -} - -static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - static const u8 reg[4] = { - LM63_REG_REMOTE_LOW_MSB, - LM63_REG_REMOTE_LOW_LSB, - LM63_REG_REMOTE_HIGH_MSB, - LM63_REG_REMOTE_HIGH_LSB, - }; - - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - int nr = attr->index; - - down(&data->update_lock); - data->temp11[nr] = TEMP11_TO_REG(val); - i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], - data->temp11[nr] >> 8); - i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], - data->temp11[nr] & 0xff); - up(&data->update_lock); - return count; -} - -/* Hysteresis register holds a relative value, while we want to present - an absolute to user-space */ -static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[2]) - - TEMP8_FROM_REG(data->temp2_crit_hyst)); -} - -/* And now the other way around, user-space provides an absolute - hysteresis value and we have to store a relative one */ -static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - long hyst; - - down(&data->update_lock); - hyst = TEMP8_FROM_REG(data->temp8[2]) - val; - i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, - HYST_TO_REG(hyst)); - up(&data->update_lock); - return count; -} - -static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm63_data *data = lm63_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); -static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, - set_fan, 1); - -static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1); -static DEVICE_ATTR(pwm1_enable, S_IRUGO, show_pwm1_enable, NULL); - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 1); - -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 1); -static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 2); -static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp8, NULL, 2); -static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, - set_temp2_crit_hyst); - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* - * Real code - */ - -static int lm63_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm63_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm63_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct lm63_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm63_data)); - - /* The common I2C client data is placed right before the - LM63-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm63_driver; - new_client->flags = 0; - - /* Default to an LM63 if forced */ - if (kind == 0) - kind = lm63; - - if (kind < 0) { /* must identify */ - u8 man_id, chip_id, reg_config1, reg_config2; - u8 reg_alert_status, reg_alert_mask; - - man_id = i2c_smbus_read_byte_data(new_client, - LM63_REG_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM63_REG_CHIP_ID); - reg_config1 = i2c_smbus_read_byte_data(new_client, - LM63_REG_CONFIG1); - reg_config2 = i2c_smbus_read_byte_data(new_client, - LM63_REG_CONFIG2); - reg_alert_status = i2c_smbus_read_byte_data(new_client, - LM63_REG_ALERT_STATUS); - reg_alert_mask = i2c_smbus_read_byte_data(new_client, - LM63_REG_ALERT_MASK); - - if (man_id == 0x01 /* National Semiconductor */ - && chip_id == 0x41 /* LM63 */ - && (reg_config1 & 0x18) == 0x00 - && (reg_config2 & 0xF8) == 0x00 - && (reg_alert_status & 0x20) == 0x00 - && (reg_alert_mask & 0xA4) == 0xA4) { - kind = lm63; - } else { /* failed */ - dev_dbg(&adapter->dev, "Unsupported chip " - "(man_id=0x%02X, chip_id=0x%02X).\n", - man_id, chip_id); - goto exit_free; - } - } - - strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the LM63 chip */ - lm63_init_client(new_client); - - /* Register sysfs hooks */ - if (data->config & 0x04) { /* tachometer enabled */ - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_fan1_min.dev_attr); - } - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -/* Idealy we shouldn't have to initialize anything, since the BIOS - should have taken care of everything */ -static void lm63_init_client(struct i2c_client *client) -{ - struct lm63_data *data = i2c_get_clientdata(client); - - data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); - data->config_fan = i2c_smbus_read_byte_data(client, - LM63_REG_CONFIG_FAN); - - /* Start converting if needed */ - if (data->config & 0x40) { /* standby */ - dev_dbg(&client->dev, "Switching to operational mode"); - data->config &= 0xA7; - i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, - data->config); - } - - /* We may need pwm1_freq before ever updating the client data */ - data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); - if (data->pwm1_freq == 0) - data->pwm1_freq = 1; - - /* Show some debug info about the LM63 configuration */ - dev_dbg(&client->dev, "Alert/tach pin configured for %s\n", - (data->config & 0x04) ? "tachometer input" : - "alert output"); - dev_dbg(&client->dev, "PWM clock %s kHz, output frequency %u Hz\n", - (data->config_fan & 0x08) ? "1.4" : "360", - ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); - dev_dbg(&client->dev, "PWM output active %s, %s mode\n", - (data->config_fan & 0x10) ? "low" : "high", - (data->config_fan & 0x20) ? "manual" : "auto"); -} - -static int lm63_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static struct lm63_data *lm63_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm63_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - if (data->config & 0x04) { /* tachometer enabled */ - /* order matters for fan1_input */ - data->fan[0] = i2c_smbus_read_byte_data(client, - LM63_REG_TACH_COUNT_LSB) & 0xFC; - data->fan[0] |= i2c_smbus_read_byte_data(client, - LM63_REG_TACH_COUNT_MSB) << 8; - data->fan[1] = (i2c_smbus_read_byte_data(client, - LM63_REG_TACH_LIMIT_LSB) & 0xFC) - | (i2c_smbus_read_byte_data(client, - LM63_REG_TACH_LIMIT_MSB) << 8); - } - - data->pwm1_freq = i2c_smbus_read_byte_data(client, - LM63_REG_PWM_FREQ); - if (data->pwm1_freq == 0) - data->pwm1_freq = 1; - data->pwm1_value = i2c_smbus_read_byte_data(client, - LM63_REG_PWM_VALUE); - - data->temp8[0] = i2c_smbus_read_byte_data(client, - LM63_REG_LOCAL_TEMP); - data->temp8[1] = i2c_smbus_read_byte_data(client, - LM63_REG_LOCAL_HIGH); - - /* order matters for temp2_input */ - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TEMP_MSB) << 8; - data->temp11[0] |= i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TEMP_LSB); - data->temp11[1] = (i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_LOW_MSB) << 8) - | i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_LOW_LSB); - data->temp11[2] = (i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_HIGH_MSB) << 8) - | i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_HIGH_LSB); - data->temp8[2] = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TCRIT); - data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, - LM63_REG_REMOTE_TCRIT_HYST); - - data->alarms = i2c_smbus_read_byte_data(client, - LM63_REG_ALERT_STATUS) & 0x7F; - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm63_init(void) -{ - return i2c_add_driver(&lm63_driver); -} - -static void __exit sensors_lm63_exit(void) -{ - i2c_del_driver(&lm63_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("LM63 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm63_init); -module_exit(sensors_lm63_exit); diff --git a/drivers/i2c/chips/lm75.c b/drivers/i2c/chips/lm75.c deleted file mode 100644 index 5be164ed278e..000000000000 --- a/drivers/i2c/chips/lm75.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - lm75.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include "lm75.h" - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, - 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(lm75); - -/* Many LM75 constants specified below */ - -/* The LM75 registers */ -#define LM75_REG_TEMP 0x00 -#define LM75_REG_CONF 0x01 -#define LM75_REG_TEMP_HYST 0x02 -#define LM75_REG_TEMP_OS 0x03 - -/* Each client has this additional data */ -struct lm75_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - u16 temp_input; /* Register values */ - u16 temp_max; - u16 temp_hyst; -}; - -static int lm75_attach_adapter(struct i2c_adapter *adapter); -static int lm75_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm75_init_client(struct i2c_client *client); -static int lm75_detach_client(struct i2c_client *client); -static int lm75_read_value(struct i2c_client *client, u8 reg); -static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); -static struct lm75_data *lm75_update_device(struct device *dev); - - -/* This is the driver that will be inserted */ -static struct i2c_driver lm75_driver = { - .owner = THIS_MODULE, - .name = "lm75", - .id = I2C_DRIVERID_LM75, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm75_attach_adapter, - .detach_client = lm75_detach_client, -}; - -#define show(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm75_data *data = lm75_update_device(dev); \ - return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->value)); \ -} -show(temp_max); -show(temp_hyst); -show(temp_input); - -#define set(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm75_data *data = i2c_get_clientdata(client); \ - int temp = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = LM75_TEMP_TO_REG(temp); \ - lm75_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} -set(temp_max, LM75_REG_TEMP_OS); -set(temp_hyst, LM75_REG_TEMP_HYST); - -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); -static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); - -static int lm75_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm75_detect); -} - -/* This function is called by i2c_detect */ -static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i; - struct i2c_client *new_client; - struct lm75_data *data; - int err = 0; - const char *name = ""; - - /* Make sure we aren't probing the ISA bus!! This is just a safety check - at this moment; i2c_detect really won't call us. */ -#ifdef DEBUG - if (i2c_is_isa_adapter(adapter)) { - dev_dbg(&adapter->dev, - "lm75_detect called for an ISA bus adapter?!?\n"); - goto exit; - } -#endif - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm75_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm75_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm75_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm75_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. There is no identification- - dedicated register so we have to rely on several tricks: - unused bits, registers cycling over 8-address boundaries, - addresses 0x04-0x07 returning the last read value. - The cycling+unused addresses combination is not tested, - since it would significantly slow the detection down and would - hardly add any value. */ - if (kind < 0) { - int cur, conf, hyst, os; - - /* Unused addresses */ - cur = i2c_smbus_read_word_data(new_client, 0); - conf = i2c_smbus_read_byte_data(new_client, 1); - hyst = i2c_smbus_read_word_data(new_client, 2); - if (i2c_smbus_read_word_data(new_client, 4) != hyst - || i2c_smbus_read_word_data(new_client, 5) != hyst - || i2c_smbus_read_word_data(new_client, 6) != hyst - || i2c_smbus_read_word_data(new_client, 7) != hyst) - goto exit_free; - os = i2c_smbus_read_word_data(new_client, 3); - if (i2c_smbus_read_word_data(new_client, 4) != os - || i2c_smbus_read_word_data(new_client, 5) != os - || i2c_smbus_read_word_data(new_client, 6) != os - || i2c_smbus_read_word_data(new_client, 7) != os) - goto exit_free; - - /* Unused bits */ - if (conf & 0xe0) - goto exit_free; - - /* Addresses cycling */ - for (i = 8; i < 0xff; i += 8) - if (i2c_smbus_read_byte_data(new_client, i + 1) != conf - || i2c_smbus_read_word_data(new_client, i + 2) != hyst - || i2c_smbus_read_word_data(new_client, i + 3) != os) - goto exit_free; - } - - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = lm75; - - if (kind == lm75) { - name = "lm75"; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the LM75 chip */ - lm75_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int lm75_detach_client(struct i2c_client *client) -{ - i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); - return 0; -} - -/* All registers are word-sized, except for the configuration register. - LM75 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int lm75_read_value(struct i2c_client *client, u8 reg) -{ - if (reg == LM75_REG_CONF) - return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); -} - -/* All registers are word-sized, except for the configuration register. - LM75 uses a high-byte first convention, which is exactly opposite to - the usual practice. */ -static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if (reg == LM75_REG_CONF) - return i2c_smbus_write_byte_data(client, reg, value); - else - return i2c_smbus_write_word_data(client, reg, swab16(value)); -} - -static void lm75_init_client(struct i2c_client *client) -{ - /* Initialize the LM75 chip */ - lm75_write_value(client, LM75_REG_CONF, 0); -} - -static struct lm75_data *lm75_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm75_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(&client->dev, "Starting lm75 update\n"); - - data->temp_input = lm75_read_value(client, LM75_REG_TEMP); - data->temp_max = lm75_read_value(client, LM75_REG_TEMP_OS); - data->temp_hyst = lm75_read_value(client, LM75_REG_TEMP_HYST); - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm75_init(void) -{ - return i2c_add_driver(&lm75_driver); -} - -static void __exit sensors_lm75_exit(void) -{ - i2c_del_driver(&lm75_driver); -} - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); -MODULE_DESCRIPTION("LM75 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm75_init); -module_exit(sensors_lm75_exit); diff --git a/drivers/i2c/chips/lm75.h b/drivers/i2c/chips/lm75.h deleted file mode 100644 index 63e3f2fb4c21..000000000000 --- a/drivers/i2c/chips/lm75.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - lm75.h - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - This file contains common code for encoding/decoding LM75 type - temperature readings, which are emulated by many of the chips - we support. As the user is unlikely to load more than one driver - which contains this code, we don't worry about the wasted space. -*/ - -#include <linux/i2c-sensor.h> - -/* straight from the datasheet */ -#define LM75_TEMP_MIN (-55000) -#define LM75_TEMP_MAX 125000 - -/* TEMP: 0.001C/bit (-55C to +125C) - REG: (0.5C/bit, two's complement) << 7 */ -static inline u16 LM75_TEMP_TO_REG(int temp) -{ - int ntemp = SENSORS_LIMIT(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); - ntemp += (ntemp<0 ? -250 : 250); - return (u16)((ntemp / 500) << 7); -} - -static inline int LM75_TEMP_FROM_REG(u16 reg) -{ - /* use integer division instead of equivalent right shift to - guarantee arithmetic shift and preserve the sign */ - return ((s16)reg / 128) * 500; -} - diff --git a/drivers/i2c/chips/lm77.c b/drivers/i2c/chips/lm77.c deleted file mode 100644 index b98f44952997..000000000000 --- a/drivers/i2c/chips/lm77.c +++ /dev/null @@ -1,420 +0,0 @@ -/* - lm77.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - - Copyright (c) 2004 Andras BALI <drewie@freemail.hu> - - Heavily based on lm75.c by Frodo Looijaard <frodol@dds.nl>. The LM77 - is a temperature sensor and thermal window comparator with 0.5 deg - resolution made by National Semiconductor. Complete datasheet can be - obtained at their site: - http://www.national.com/pf/LM/LM77.html - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(lm77); - -/* The LM77 registers */ -#define LM77_REG_TEMP 0x00 -#define LM77_REG_CONF 0x01 -#define LM77_REG_TEMP_HYST 0x02 -#define LM77_REG_TEMP_CRIT 0x03 -#define LM77_REG_TEMP_MIN 0x04 -#define LM77_REG_TEMP_MAX 0x05 - -/* Each client has this additional data */ -struct lm77_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; - unsigned long last_updated; /* In jiffies */ - int temp_input; /* Temperatures */ - int temp_crit; - int temp_min; - int temp_max; - int temp_hyst; - u8 alarms; -}; - -static int lm77_attach_adapter(struct i2c_adapter *adapter); -static int lm77_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm77_init_client(struct i2c_client *client); -static int lm77_detach_client(struct i2c_client *client); -static u16 lm77_read_value(struct i2c_client *client, u8 reg); -static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value); - -static struct lm77_data *lm77_update_device(struct device *dev); - - -/* This is the driver that will be inserted */ -static struct i2c_driver lm77_driver = { - .owner = THIS_MODULE, - .name = "lm77", - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm77_attach_adapter, - .detach_client = lm77_detach_client, -}; - -/* straight from the datasheet */ -#define LM77_TEMP_MIN (-55000) -#define LM77_TEMP_MAX 125000 - -/* In the temperature registers, the low 3 bits are not part of the - temperature values; they are the status bits. */ -static inline u16 LM77_TEMP_TO_REG(int temp) -{ - int ntemp = SENSORS_LIMIT(temp, LM77_TEMP_MIN, LM77_TEMP_MAX); - return (u16)((ntemp / 500) * 8); -} - -static inline int LM77_TEMP_FROM_REG(u16 reg) -{ - return ((int)reg / 8) * 500; -} - -/* sysfs stuff */ - -/* read routines for temperature limits */ -#define show(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm77_data *data = lm77_update_device(dev); \ - return sprintf(buf, "%d\n", data->value); \ -} - -show(temp_input); -show(temp_crit); -show(temp_min); -show(temp_max); -show(alarms); - -/* read routines for hysteresis values */ -static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm77_data *data = lm77_update_device(dev); - return sprintf(buf, "%d\n", data->temp_crit - data->temp_hyst); -} -static ssize_t show_temp_min_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm77_data *data = lm77_update_device(dev); - return sprintf(buf, "%d\n", data->temp_min + data->temp_hyst); -} -static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm77_data *data = lm77_update_device(dev); - return sprintf(buf, "%d\n", data->temp_max - data->temp_hyst); -} - -/* write routines */ -#define set(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm77_data *data = i2c_get_clientdata(client); \ - long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = val; \ - lm77_write_value(client, reg, LM77_TEMP_TO_REG(data->value)); \ - up(&data->update_lock); \ - return count; \ -} - -set(temp_min, LM77_REG_TEMP_MIN); -set(temp_max, LM77_REG_TEMP_MAX); - -/* hysteresis is stored as a relative value on the chip, so it has to be - converted first */ -static ssize_t set_temp_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm77_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->temp_hyst = data->temp_crit - val; - lm77_write_value(client, LM77_REG_TEMP_HYST, - LM77_TEMP_TO_REG(data->temp_hyst)); - up(&data->update_lock); - return count; -} - -/* preserve hysteresis when setting T_crit */ -static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm77_data *data = i2c_get_clientdata(client); - long val = simple_strtoul(buf, NULL, 10); - int oldcrithyst; - - down(&data->update_lock); - oldcrithyst = data->temp_crit - data->temp_hyst; - data->temp_crit = val; - data->temp_hyst = data->temp_crit - oldcrithyst; - lm77_write_value(client, LM77_REG_TEMP_CRIT, - LM77_TEMP_TO_REG(data->temp_crit)); - lm77_write_value(client, LM77_REG_TEMP_HYST, - LM77_TEMP_TO_REG(data->temp_hyst)); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, - show_temp_input, NULL); -static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, - show_temp_crit, set_temp_crit); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, - show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_temp_max, set_temp_max); - -static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, - show_temp_crit_hyst, set_temp_crit_hyst); -static DEVICE_ATTR(temp1_min_hyst, S_IRUGO, - show_temp_min_hyst, NULL); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, - show_temp_max_hyst, NULL); - -static DEVICE_ATTR(alarms, S_IRUGO, - show_alarms, NULL); - -static int lm77_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm77_detect); -} - -/* This function is called by i2c_detect */ -static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm77_data *data; - int err = 0; - const char *name = ""; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm77_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm77_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm77_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm77_driver; - new_client->flags = 0; - - /* Here comes the remaining detection. Since the LM77 has no - register dedicated to identification, we have to rely on the - following tricks: - - 1. the high 4 bits represent the sign and thus they should - always be the same - 2. the high 3 bits are unused in the configuration register - 3. addresses 0x06 and 0x07 return the last read value - 4. registers cycling over 8-address boundaries - - Word-sized registers are high-byte first. */ - if (kind < 0) { - int i, cur, conf, hyst, crit, min, max; - - /* addresses cycling */ - cur = i2c_smbus_read_word_data(new_client, 0); - conf = i2c_smbus_read_byte_data(new_client, 1); - hyst = i2c_smbus_read_word_data(new_client, 2); - crit = i2c_smbus_read_word_data(new_client, 3); - min = i2c_smbus_read_word_data(new_client, 4); - max = i2c_smbus_read_word_data(new_client, 5); - for (i = 8; i <= 0xff; i += 8) - if (i2c_smbus_read_byte_data(new_client, i + 1) != conf - || i2c_smbus_read_word_data(new_client, i + 2) != hyst - || i2c_smbus_read_word_data(new_client, i + 3) != crit - || i2c_smbus_read_word_data(new_client, i + 4) != min - || i2c_smbus_read_word_data(new_client, i + 5) != max) - goto exit_free; - - /* sign bits */ - if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0) - || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0) - || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0) - || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0) - || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0)) - goto exit_free; - - /* unused bits */ - if (conf & 0xe0) - goto exit_free; - - /* 0x06 and 0x07 return the last read value */ - cur = i2c_smbus_read_word_data(new_client, 0); - if (i2c_smbus_read_word_data(new_client, 6) != cur - || i2c_smbus_read_word_data(new_client, 7) != cur) - goto exit_free; - hyst = i2c_smbus_read_word_data(new_client, 2); - if (i2c_smbus_read_word_data(new_client, 6) != hyst - || i2c_smbus_read_word_data(new_client, 7) != hyst) - goto exit_free; - min = i2c_smbus_read_word_data(new_client, 4); - if (i2c_smbus_read_word_data(new_client, 6) != min - || i2c_smbus_read_word_data(new_client, 7) != min) - goto exit_free; - - } - - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = lm77; - - if (kind == lm77) { - name = "lm77"; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the LM77 chip */ - lm77_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int lm77_detach_client(struct i2c_client *client) -{ - i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); - return 0; -} - -/* All registers are word-sized, except for the configuration register. - The LM77 uses the high-byte first convention. */ -static u16 lm77_read_value(struct i2c_client *client, u8 reg) -{ - if (reg == LM77_REG_CONF) - return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); -} - -static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if (reg == LM77_REG_CONF) - return i2c_smbus_write_byte_data(client, reg, value); - else - return i2c_smbus_write_word_data(client, reg, swab16(value)); -} - -static void lm77_init_client(struct i2c_client *client) -{ - /* Initialize the LM77 chip - turn off shutdown mode */ - int conf = lm77_read_value(client, LM77_REG_CONF); - if (conf & 1) - lm77_write_value(client, LM77_REG_CONF, conf & 0xfe); -} - -static struct lm77_data *lm77_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm77_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(&client->dev, "Starting lm77 update\n"); - data->temp_input = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP)); - data->temp_hyst = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_HYST)); - data->temp_crit = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_CRIT)); - data->temp_min = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_MIN)); - data->temp_max = - LM77_TEMP_FROM_REG(lm77_read_value(client, - LM77_REG_TEMP_MAX)); - data->alarms = - lm77_read_value(client, LM77_REG_TEMP) & 0x0007; - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm77_init(void) -{ - return i2c_add_driver(&lm77_driver); -} - -static void __exit sensors_lm77_exit(void) -{ - i2c_del_driver(&lm77_driver); -} - -MODULE_AUTHOR("Andras BALI <drewie@freemail.hu>"); -MODULE_DESCRIPTION("LM77 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm77_init); -module_exit(sensors_lm77_exit); diff --git a/drivers/i2c/chips/lm78.c b/drivers/i2c/chips/lm78.c deleted file mode 100644 index 29241469dcba..000000000000 --- a/drivers/i2c/chips/lm78.c +++ /dev/null @@ -1,795 +0,0 @@ -/* - lm78.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <asm/io.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, - 0x25, 0x26, 0x27, 0x28, 0x29, - 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, - 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_3(lm78, lm78j, lm79); - -/* Many LM78 constants specified below */ - -/* Length of ISA address segment */ -#define LM78_EXTENT 8 - -/* Where are the ISA address/data registers relative to the base address */ -#define LM78_ADDR_REG_OFFSET 5 -#define LM78_DATA_REG_OFFSET 6 - -/* The LM78 registers */ -#define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2) -#define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2) -#define LM78_REG_IN(nr) (0x20 + (nr)) - -#define LM78_REG_FAN_MIN(nr) (0x3b + (nr)) -#define LM78_REG_FAN(nr) (0x28 + (nr)) - -#define LM78_REG_TEMP 0x27 -#define LM78_REG_TEMP_OVER 0x39 -#define LM78_REG_TEMP_HYST 0x3a - -#define LM78_REG_ALARM1 0x41 -#define LM78_REG_ALARM2 0x42 - -#define LM78_REG_VID_FANDIV 0x47 - -#define LM78_REG_CONFIG 0x40 -#define LM78_REG_CHIPID 0x49 -#define LM78_REG_I2C_ADDR 0x48 - - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. */ - -/* IN: mV, (0V to 4.08V) - REG: 16mV/bit */ -static inline u8 IN_TO_REG(unsigned long val) -{ - unsigned long nval = SENSORS_LIMIT(val, 0, 4080); - return (nval + 8) / 16; -} -#define IN_FROM_REG(val) ((val) * 16) - -static inline u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm <= 0) - return 255; - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); -} - -static inline int FAN_FROM_REG(u8 val, int div) -{ - return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); -} - -/* TEMP: mC (-128C to +127C) - REG: 1C/bit, two's complement */ -static inline s8 TEMP_TO_REG(int val) -{ - int nval = SENSORS_LIMIT(val, -128000, 127000) ; - return nval<0 ? (nval-500)/1000 : (nval+500)/1000; -} - -static inline int TEMP_FROM_REG(s8 val) -{ - return val * 1000; -} - -/* VID: mV - REG: (see doc/vid) */ -static inline int VID_FROM_REG(u8 val) -{ - return val==0x1f ? 0 : val>=0x10 ? 5100-val*100 : 2050-val*50; -} - -#define DIV_FROM_REG(val) (1 << (val)) - -/* There are some complications in a module like this. First off, LM78 chips - may be both present on the SMBus and the ISA bus, and we have to handle - those cases separately at some places. Second, there might be several - LM78 chips available (well, actually, that is probably never done; but - it is a clean illustration of how to handle a case like that). Finally, - a specific chip may be attached to *both* ISA and SMBus, and we would - not like to detect it double. Fortunately, in the case of the LM78 at - least, a register tells us what SMBus address we are on, so that helps - a bit - except if there could be more than one SMBus. Groan. No solution - for this yet. */ - -/* This module may seem overly long and complicated. In fact, it is not so - bad. Quite a lot of bookkeeping is done. A real driver can often cut - some corners. */ - -/* For each registered LM78, we need to keep some data in memory. That - data is pointed to by lm78_list[NR]->data. The structure itself is - dynamically allocated, at the same time when a new lm78 client is - allocated. */ -struct lm78_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 in[7]; /* Register value */ - u8 in_max[7]; /* Register value */ - u8 in_min[7]; /* Register value */ - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ - s8 temp; /* Register value */ - s8 temp_over; /* Register value */ - s8 temp_hyst; /* Register value */ - u8 fan_div[3]; /* Register encoding, shifted right */ - u8 vid; /* Register encoding, combined */ - u16 alarms; /* Register encoding, combined */ -}; - - -static int lm78_attach_adapter(struct i2c_adapter *adapter); -static int lm78_detect(struct i2c_adapter *adapter, int address, int kind); -static int lm78_detach_client(struct i2c_client *client); - -static int lm78_read_value(struct i2c_client *client, u8 register); -static int lm78_write_value(struct i2c_client *client, u8 register, u8 value); -static struct lm78_data *lm78_update_device(struct device *dev); -static void lm78_init_client(struct i2c_client *client); - - -static struct i2c_driver lm78_driver = { - .owner = THIS_MODULE, - .name = "lm78", - .id = I2C_DRIVERID_LM78, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm78_attach_adapter, - .detach_client = lm78_detach_client, -}; - -/* 7 Voltages */ -static ssize_t show_in(struct device *dev, char *buf, int nr) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); -} - -static ssize_t show_in_min(struct device *dev, char *buf, int nr) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); -} - -static ssize_t show_in_max(struct device *dev, char *buf, int nr) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); -} - -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm78_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val); - lm78_write_value(client, LM78_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm78_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val); - lm78_write_value(client, LM78_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); - return count; -} - -#define show_in_offset(offset) \ -static ssize_t \ - show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in##offset, NULL); \ -static ssize_t \ - show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t \ - show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); -show_in_offset(5); -show_in_offset(6); - -/* Temperature */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); -} - -static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); -} - -static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm78_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_over = TEMP_TO_REG(val); - lm78_write_value(client, LM78_REG_TEMP_OVER, data->temp_over); - up(&data->update_lock); - return count; -} - -static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); -} - -static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm78_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_hyst = TEMP_TO_REG(val); - lm78_write_value(client, LM78_REG_TEMP_HYST, data->temp_hyst); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, - show_temp_over, set_temp_over); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, - show_temp_hyst, set_temp_hyst); - -/* 3 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr])) ); -} - -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])) ); -} - -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm78_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) ); -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm78_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - unsigned long min; - u8 reg; - - down(&data->update_lock); - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - - switch (val) { - case 1: data->fan_div[nr] = 0; break; - case 2: data->fan_div[nr] = 1; break; - case 4: data->fan_div[nr] = 2; break; - case 8: data->fan_div[nr] = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); - return -EINVAL; - } - - reg = lm78_read_value(client, LM78_REG_VID_FANDIV); - switch (nr) { - case 0: - reg = (reg & 0xcf) | (data->fan_div[nr] << 4); - break; - case 1: - reg = (reg & 0x3f) | (data->fan_div[nr] << 6); - break; - } - lm78_write_value(client, LM78_REG_VID_FANDIV, reg); - - data->fan_min[nr] = - FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - lm78_write_value(client, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - - return count; -} - -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - return set_fan_div(dev, buf, count, 0) ; -} - -static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - return set_fan_div(dev, buf, count, 1) ; -} - -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); - -/* Fan 3 divisor is locked in H/W */ -static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, - show_fan_1_div, set_fan_1_div); -static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, - show_fan_2_div, set_fan_2_div); -static DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_3_div, NULL); - -/* VID */ -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%d\n", VID_FROM_REG(data->vid)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); - -/* Alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm78_data *data = lm78_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* This function is called when: - * lm78_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and lm78_driver is still present) */ -static int lm78_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm78_detect); -} - -/* This function is called by i2c_detect */ -int lm78_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i, err; - struct i2c_client *new_client; - struct lm78_data *data; - const char *client_name = ""; - int is_isa = i2c_is_isa_adapter(adapter); - - if (!is_isa && - !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - err = -ENODEV; - goto ERROR0; - } - - /* Reserve the ISA region */ - if (is_isa) - if (!request_region(address, LM78_EXTENT, lm78_driver.name)) { - err = -EBUSY; - goto ERROR0; - } - - /* Probe whether there is anything available on this address. Already - done for SMBus clients */ - if (kind < 0) { - if (is_isa) { - -#define REALLY_SLOW_IO - /* We need the timeouts for at least some LM78-like - chips. But only if we read 'undefined' registers. */ - i = inb_p(address + 1); - if (inb_p(address + 2) != i) { - err = -ENODEV; - goto ERROR1; - } - if (inb_p(address + 3) != i) { - err = -ENODEV; - goto ERROR1; - } - if (inb_p(address + 7) != i) { - err = -ENODEV; - goto ERROR1; - } -#undef REALLY_SLOW_IO - - /* Let's just hope nothing breaks here */ - i = inb_p(address + 5) & 0x7f; - outb_p(~i & 0x7f, address + 5); - if ((inb_p(address + 5) & 0x7f) != (~i & 0x7f)) { - outb_p(i, address + 5); - err = -ENODEV; - goto ERROR1; - } - } - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm78_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct lm78_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR1; - } - memset(data, 0, sizeof(struct lm78_data)); - - new_client = &data->client; - if (is_isa) - init_MUTEX(&data->lock); - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm78_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - if (kind < 0) { - if (lm78_read_value(new_client, LM78_REG_CONFIG) & 0x80) { - err = -ENODEV; - goto ERROR2; - } - if (!is_isa && (lm78_read_value( - new_client, LM78_REG_I2C_ADDR) != address)) { - err = -ENODEV; - goto ERROR2; - } - } - - /* Determine the chip type. */ - if (kind <= 0) { - i = lm78_read_value(new_client, LM78_REG_CHIPID); - if (i == 0x00 || i == 0x20) - kind = lm78; - else if (i == 0x40) - kind = lm78j; - else if ((i & 0xfe) == 0xc0) - kind = lm79; - else { - if (kind == 0) - dev_warn(&adapter->dev, "Ignoring 'force' " - "parameter for unknown chip at " - "adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - err = -ENODEV; - goto ERROR2; - } - } - - if (kind == lm78) { - client_name = "lm78"; - } else if (kind == lm78j) { - client_name = "lm78-j"; - } else if (kind == lm79) { - client_name = "lm79"; - } - - /* Fill in the remaining client fields and put into the global list */ - strlcpy(new_client->name, client_name, I2C_NAME_SIZE); - data->type = kind; - - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR2; - - /* Initialize the LM78 chip */ - lm78_init_client(new_client); - - /* A few vars need to be filled upon startup */ - for (i = 0; i < 3; i++) { - data->fan_min[i] = lm78_read_value(new_client, - LM78_REG_FAN_MIN(i)); - } - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan3_min); - device_create_file(&new_client->dev, &dev_attr_fan3_div); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - - return 0; - -ERROR2: - kfree(data); -ERROR1: - if (is_isa) - release_region(address, LM78_EXTENT); -ERROR0: - return err; -} - -static int lm78_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - if(i2c_is_isa_client(client)) - release_region(client->addr, LM78_EXTENT); - - kfree(i2c_get_clientdata(client)); - - return 0; -} - -/* The SMBus locks itself, but ISA access must be locked explicitly! - We don't want to lock the whole ISA bus, so we lock each client - separately. - We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, - would slow down the LM78 access and should not be necessary. */ -static int lm78_read_value(struct i2c_client *client, u8 reg) -{ - int res; - if (i2c_is_isa_client(client)) { - struct lm78_data *data = i2c_get_clientdata(client); - down(&data->lock); - outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); - res = inb_p(client->addr + LM78_DATA_REG_OFFSET); - up(&data->lock); - return res; - } else - return i2c_smbus_read_byte_data(client, reg); -} - -/* The SMBus locks itself, but ISA access muse be locked explicitly! - We don't want to lock the whole ISA bus, so we lock each client - separately. - We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, - would slow down the LM78 access and should not be necessary. - There are some ugly typecasts here, but the good new is - they should - nowhere else be necessary! */ -static int lm78_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - if (i2c_is_isa_client(client)) { - struct lm78_data *data = i2c_get_clientdata(client); - down(&data->lock); - outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); - outb_p(value, client->addr + LM78_DATA_REG_OFFSET); - up(&data->lock); - return 0; - } else - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new LM78. It should set limits, etc. */ -static void lm78_init_client(struct i2c_client *client) -{ - u8 config = lm78_read_value(client, LM78_REG_CONFIG); - - /* Start monitoring */ - if (!(config & 0x01)) - lm78_write_value(client, LM78_REG_CONFIG, - (config & 0xf7) | 0x01); -} - -static struct lm78_data *lm78_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm78_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - dev_dbg(&client->dev, "Starting lm78 update\n"); - - for (i = 0; i <= 6; i++) { - data->in[i] = - lm78_read_value(client, LM78_REG_IN(i)); - data->in_min[i] = - lm78_read_value(client, LM78_REG_IN_MIN(i)); - data->in_max[i] = - lm78_read_value(client, LM78_REG_IN_MAX(i)); - } - for (i = 0; i < 3; i++) { - data->fan[i] = - lm78_read_value(client, LM78_REG_FAN(i)); - data->fan_min[i] = - lm78_read_value(client, LM78_REG_FAN_MIN(i)); - } - data->temp = lm78_read_value(client, LM78_REG_TEMP); - data->temp_over = - lm78_read_value(client, LM78_REG_TEMP_OVER); - data->temp_hyst = - lm78_read_value(client, LM78_REG_TEMP_HYST); - i = lm78_read_value(client, LM78_REG_VID_FANDIV); - data->vid = i & 0x0f; - if (data->type == lm79) - data->vid |= - (lm78_read_value(client, LM78_REG_CHIPID) & - 0x01) << 4; - else - data->vid |= 0x10; - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = i >> 6; - data->alarms = lm78_read_value(client, LM78_REG_ALARM1) + - (lm78_read_value(client, LM78_REG_ALARM2) << 8); - data->last_updated = jiffies; - data->valid = 1; - - data->fan_div[2] = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sm_lm78_init(void) -{ - return i2c_add_driver(&lm78_driver); -} - -static void __exit sm_lm78_exit(void) -{ - i2c_del_driver(&lm78_driver); -} - - - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); -MODULE_DESCRIPTION("LM78, LM78-J and LM79 driver"); -MODULE_LICENSE("GPL"); - -module_init(sm_lm78_init); -module_exit(sm_lm78_exit); diff --git a/drivers/i2c/chips/lm80.c b/drivers/i2c/chips/lm80.c deleted file mode 100644 index 8100595feb44..000000000000 --- a/drivers/i2c/chips/lm80.c +++ /dev/null @@ -1,601 +0,0 @@ -/* - * lm80.c - From lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - * and Philip Edelbrock <phil@netroedge.com> - * - * Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, - 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(lm80); - -/* Many LM80 constants specified below */ - -/* The LM80 registers */ -#define LM80_REG_IN_MAX(nr) (0x2a + (nr) * 2) -#define LM80_REG_IN_MIN(nr) (0x2b + (nr) * 2) -#define LM80_REG_IN(nr) (0x20 + (nr)) - -#define LM80_REG_FAN1 0x28 -#define LM80_REG_FAN2 0x29 -#define LM80_REG_FAN_MIN(nr) (0x3b + (nr)) - -#define LM80_REG_TEMP 0x27 -#define LM80_REG_TEMP_HOT_MAX 0x38 -#define LM80_REG_TEMP_HOT_HYST 0x39 -#define LM80_REG_TEMP_OS_MAX 0x3a -#define LM80_REG_TEMP_OS_HYST 0x3b - -#define LM80_REG_CONFIG 0x00 -#define LM80_REG_ALARM1 0x01 -#define LM80_REG_ALARM2 0x02 -#define LM80_REG_MASK1 0x03 -#define LM80_REG_MASK2 0x04 -#define LM80_REG_FANDIV 0x05 -#define LM80_REG_RES 0x06 - - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ - -#define IN_TO_REG(val) (SENSORS_LIMIT(((val)+5)/10,0,255)) -#define IN_FROM_REG(val) ((val)*10) - -static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div) -{ - if (rpm == 0) - return 255; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254); -} - -#define FAN_FROM_REG(val,div) ((val)==0?-1:\ - (val)==255?0:1350000/((div)*(val))) - -static inline long TEMP_FROM_REG(u16 temp) -{ - long res; - - temp >>= 4; - if (temp < 0x0800) - res = 625 * (long) temp; - else - res = ((long) temp - 0x01000) * 625; - - return res / 10; -} - -#define TEMP_LIMIT_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) - -#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val)<0?\ - ((val)-500)/1000:((val)+500)/1000,0,255) - -#define DIV_FROM_REG(val) (1 << (val)) - -/* - * Client data (each client gets its own) - */ - -struct lm80_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 in[7]; /* Register value */ - u8 in_max[7]; /* Register value */ - u8 in_min[7]; /* Register value */ - u8 fan[2]; /* Register value */ - u8 fan_min[2]; /* Register value */ - u8 fan_div[2]; /* Register encoding, shifted right */ - u16 temp; /* Register values, shifted right */ - u8 temp_hot_max; /* Register value */ - u8 temp_hot_hyst; /* Register value */ - u8 temp_os_max; /* Register value */ - u8 temp_os_hyst; /* Register value */ - u16 alarms; /* Register encoding, combined */ -}; - -/* - * Functions declaration - */ - -static int lm80_attach_adapter(struct i2c_adapter *adapter); -static int lm80_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm80_init_client(struct i2c_client *client); -static int lm80_detach_client(struct i2c_client *client); -static struct lm80_data *lm80_update_device(struct device *dev); -static int lm80_read_value(struct i2c_client *client, u8 reg); -static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver lm80_driver = { - .owner = THIS_MODULE, - .name = "lm80", - .id = I2C_DRIVERID_LM80, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm80_attach_adapter, - .detach_client = lm80_detach_client, -}; - -/* - * Sysfs stuff - */ - -#define show_in(suffix, value) \ -static ssize_t show_in_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", IN_FROM_REG(data->value)); \ -} -show_in(min0, in_min[0]); -show_in(min1, in_min[1]); -show_in(min2, in_min[2]); -show_in(min3, in_min[3]); -show_in(min4, in_min[4]); -show_in(min5, in_min[5]); -show_in(min6, in_min[6]); -show_in(max0, in_max[0]); -show_in(max1, in_max[1]); -show_in(max2, in_max[2]); -show_in(max3, in_max[3]); -show_in(max4, in_max[4]); -show_in(max5, in_max[5]); -show_in(max6, in_max[6]); -show_in(input0, in[0]); -show_in(input1, in[1]); -show_in(input2, in[2]); -show_in(input3, in[3]); -show_in(input4, in[4]); -show_in(input5, in[5]); -show_in(input6, in[6]); - -#define set_in(suffix, value, reg) \ -static ssize_t set_in_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock);\ - data->value = IN_TO_REG(val); \ - lm80_write_value(client, reg, data->value); \ - up(&data->update_lock);\ - return count; \ -} -set_in(min0, in_min[0], LM80_REG_IN_MIN(0)); -set_in(min1, in_min[1], LM80_REG_IN_MIN(1)); -set_in(min2, in_min[2], LM80_REG_IN_MIN(2)); -set_in(min3, in_min[3], LM80_REG_IN_MIN(3)); -set_in(min4, in_min[4], LM80_REG_IN_MIN(4)); -set_in(min5, in_min[5], LM80_REG_IN_MIN(5)); -set_in(min6, in_min[6], LM80_REG_IN_MIN(6)); -set_in(max0, in_max[0], LM80_REG_IN_MAX(0)); -set_in(max1, in_max[1], LM80_REG_IN_MAX(1)); -set_in(max2, in_max[2], LM80_REG_IN_MAX(2)); -set_in(max3, in_max[3], LM80_REG_IN_MAX(3)); -set_in(max4, in_max[4], LM80_REG_IN_MAX(4)); -set_in(max5, in_max[5], LM80_REG_IN_MAX(5)); -set_in(max6, in_max[6], LM80_REG_IN_MAX(6)); - -#define show_fan(suffix, value, div) \ -static ssize_t show_fan_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->value, \ - DIV_FROM_REG(data->div))); \ -} -show_fan(min1, fan_min[0], fan_div[0]); -show_fan(min2, fan_min[1], fan_div[1]); -show_fan(input1, fan[0], fan_div[0]); -show_fan(input2, fan[1], fan_div[1]); - -#define show_fan_div(suffix, value) \ -static ssize_t show_fan_div##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", DIV_FROM_REG(data->value)); \ -} -show_fan_div(1, fan_div[0]); -show_fan_div(2, fan_div[1]); - -#define set_fan(suffix, value, reg, div) \ -static ssize_t set_fan_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ - long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock);\ - data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \ - lm80_write_value(client, reg, data->value); \ - up(&data->update_lock);\ - return count; \ -} -set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]); -set_fan(min2, fan_min[1], LM80_REG_FAN_MIN(2), fan_div[1]); - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm80_data *data = i2c_get_clientdata(client); - unsigned long min, val = simple_strtoul(buf, NULL, 10); - u8 reg; - - /* Save fan_min */ - down(&data->update_lock); - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - - switch (val) { - case 1: data->fan_div[nr] = 0; break; - case 2: data->fan_div[nr] = 1; break; - case 4: data->fan_div[nr] = 2; break; - case 8: data->fan_div[nr] = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); - return -EINVAL; - } - - reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1)))) - | (data->fan_div[nr] << (2 * (nr + 1))); - lm80_write_value(client, LM80_REG_FANDIV, reg); - - /* Restore fan_min */ - data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]); - up(&data->update_lock); - - return count; -} - -#define set_fan_div(number) \ -static ssize_t set_fan_div##number(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_fan_div(dev, buf, count, number - 1); \ -} -set_fan_div(1); -set_fan_div(2); - -static ssize_t show_temp_input1(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm80_data *data = lm80_update_device(dev); - return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp)); -} - -#define show_temp(suffix, value) \ -static ssize_t show_temp_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \ -} -show_temp(hot_max, temp_hot_max); -show_temp(hot_hyst, temp_hot_hyst); -show_temp(os_max, temp_os_max); -show_temp(os_hyst, temp_os_hyst); - -#define set_temp(suffix, value, reg) \ -static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ - long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_LIMIT_TO_REG(val); \ - lm80_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} -set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX); -set_temp(hot_hyst, temp_hot_hyst, LM80_REG_TEMP_HOT_HYST); -set_temp(os_max, temp_os_max, LM80_REG_TEMP_OS_MAX); -set_temp(os_hyst, temp_os_hyst, LM80_REG_TEMP_OS_HYST); - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm80_data *data = lm80_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0); -static DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min1, set_in_min1); -static DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min2, set_in_min2); -static DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min3, set_in_min3); -static DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min4, set_in_min4); -static DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min5, set_in_min5); -static DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min6, set_in_min6); -static DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max0, set_in_max0); -static DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max1, set_in_max1); -static DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max2, set_in_max2); -static DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max3, set_in_max3); -static DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max4, set_in_max4); -static DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max5, set_in_max5); -static DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max6, set_in_max6); -static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL); -static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL); -static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL); -static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL); -static DEVICE_ATTR(in4_input, S_IRUGO, show_in_input4, NULL); -static DEVICE_ATTR(in5_input, S_IRUGO, show_in_input5, NULL); -static DEVICE_ATTR(in6_input, S_IRUGO, show_in_input6, NULL); -static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min1, - set_fan_min1); -static DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min2, - set_fan_min2); -static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL); -static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL); -static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div1, set_fan_div1); -static DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div2, set_fan_div2); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max, - set_temp_hot_max); -static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst, - set_temp_hot_hyst); -static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max, - set_temp_os_max); -static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst, - set_temp_os_hyst); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* - * Real code - */ - -static int lm80_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm80_detect); -} - -int lm80_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i, cur; - struct i2c_client *new_client; - struct lm80_data *data; - int err = 0; - const char *name; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm80_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm80_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm80_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. It is lousy. */ - if (lm80_read_value(new_client, LM80_REG_ALARM2) & 0xc0) - goto error_free; - for (i = 0x2a; i <= 0x3d; i++) { - cur = i2c_smbus_read_byte_data(new_client, i); - if ((i2c_smbus_read_byte_data(new_client, i + 0x40) != cur) - || (i2c_smbus_read_byte_data(new_client, i + 0x80) != cur) - || (i2c_smbus_read_byte_data(new_client, i + 0xc0) != cur)) - goto error_free; - } - - /* Determine the chip type - only one kind supported! */ - kind = lm80; - name = "lm80"; - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto error_free; - - /* Initialize the LM80 chip */ - lm80_init_client(new_client); - - /* A few vars need to be filled upon startup */ - data->fan_min[0] = lm80_read_value(new_client, LM80_REG_FAN_MIN(1)); - data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2)); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -error_free: - kfree(data); -exit: - return err; -} - -static int lm80_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static int lm80_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new LM80. */ -static void lm80_init_client(struct i2c_client *client) -{ - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others. This makes most other - initializations unnecessary */ - lm80_write_value(client, LM80_REG_CONFIG, 0x80); - /* Set 11-bit temperature resolution */ - lm80_write_value(client, LM80_REG_RES, 0x08); - - /* Start monitoring */ - lm80_write_value(client, LM80_REG_CONFIG, 0x01); -} - -static struct lm80_data *lm80_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm80_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - dev_dbg(&client->dev, "Starting lm80 update\n"); - for (i = 0; i <= 6; i++) { - data->in[i] = - lm80_read_value(client, LM80_REG_IN(i)); - data->in_min[i] = - lm80_read_value(client, LM80_REG_IN_MIN(i)); - data->in_max[i] = - lm80_read_value(client, LM80_REG_IN_MAX(i)); - } - data->fan[0] = lm80_read_value(client, LM80_REG_FAN1); - data->fan_min[0] = - lm80_read_value(client, LM80_REG_FAN_MIN(1)); - data->fan[1] = lm80_read_value(client, LM80_REG_FAN2); - data->fan_min[1] = - lm80_read_value(client, LM80_REG_FAN_MIN(2)); - - data->temp = - (lm80_read_value(client, LM80_REG_TEMP) << 8) | - (lm80_read_value(client, LM80_REG_RES) & 0xf0); - data->temp_os_max = - lm80_read_value(client, LM80_REG_TEMP_OS_MAX); - data->temp_os_hyst = - lm80_read_value(client, LM80_REG_TEMP_OS_HYST); - data->temp_hot_max = - lm80_read_value(client, LM80_REG_TEMP_HOT_MAX); - data->temp_hot_hyst = - lm80_read_value(client, LM80_REG_TEMP_HOT_HYST); - - i = lm80_read_value(client, LM80_REG_FANDIV); - data->fan_div[0] = (i >> 2) & 0x03; - data->fan_div[1] = (i >> 4) & 0x03; - data->alarms = lm80_read_value(client, LM80_REG_ALARM1) + - (lm80_read_value(client, LM80_REG_ALARM2) << 8); - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm80_init(void) -{ - return i2c_add_driver(&lm80_driver); -} - -static void __exit sensors_lm80_exit(void) -{ - i2c_del_driver(&lm80_driver); -} - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("LM80 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm80_init); -module_exit(sensors_lm80_exit); diff --git a/drivers/i2c/chips/lm83.c b/drivers/i2c/chips/lm83.c deleted file mode 100644 index a49008b444c8..000000000000 --- a/drivers/i2c/chips/lm83.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * lm83.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org> - * - * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is - * a sensor chip made by National Semiconductor. It reports up to four - * temperatures (its own plus up to three external ones) with a 1 deg - * resolution and a 3-4 deg accuracy. Complete datasheet can be obtained - * from National's website at: - * http://www.national.com/pf/LM/LM83.html - * Since the datasheet omits to give the chip stepping code, I give it - * here: 0x03 (at register 0xff). - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/hwmon-sysfs.h> - -/* - * Addresses to scan - * Address is selected using 2 three-level pins, resulting in 9 possible - * addresses. - */ - -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(lm83); - -/* - * The LM83 registers - * Manufacturer ID is 0x01 for National Semiconductor. - */ - -#define LM83_REG_R_MAN_ID 0xFE -#define LM83_REG_R_CHIP_ID 0xFF -#define LM83_REG_R_CONFIG 0x03 -#define LM83_REG_W_CONFIG 0x09 -#define LM83_REG_R_STATUS1 0x02 -#define LM83_REG_R_STATUS2 0x35 -#define LM83_REG_R_LOCAL_TEMP 0x00 -#define LM83_REG_R_LOCAL_HIGH 0x05 -#define LM83_REG_W_LOCAL_HIGH 0x0B -#define LM83_REG_R_REMOTE1_TEMP 0x30 -#define LM83_REG_R_REMOTE1_HIGH 0x38 -#define LM83_REG_W_REMOTE1_HIGH 0x50 -#define LM83_REG_R_REMOTE2_TEMP 0x01 -#define LM83_REG_R_REMOTE2_HIGH 0x07 -#define LM83_REG_W_REMOTE2_HIGH 0x0D -#define LM83_REG_R_REMOTE3_TEMP 0x31 -#define LM83_REG_R_REMOTE3_HIGH 0x3A -#define LM83_REG_W_REMOTE3_HIGH 0x52 -#define LM83_REG_R_TCRIT 0x42 -#define LM83_REG_W_TCRIT 0x5A - -/* - * Conversions and various macros - * The LM83 uses signed 8-bit values with LSB = 1 degree Celsius. - */ - -#define TEMP_FROM_REG(val) ((val) * 1000) -#define TEMP_TO_REG(val) ((val) <= -128000 ? -128 : \ - (val) >= 127000 ? 127 : \ - (val) < 0 ? ((val) - 500) / 1000 : \ - ((val) + 500) / 1000) - -static const u8 LM83_REG_R_TEMP[] = { - LM83_REG_R_LOCAL_TEMP, - LM83_REG_R_REMOTE1_TEMP, - LM83_REG_R_REMOTE2_TEMP, - LM83_REG_R_REMOTE3_TEMP, - LM83_REG_R_LOCAL_HIGH, - LM83_REG_R_REMOTE1_HIGH, - LM83_REG_R_REMOTE2_HIGH, - LM83_REG_R_REMOTE3_HIGH, - LM83_REG_R_TCRIT, -}; - -static const u8 LM83_REG_W_HIGH[] = { - LM83_REG_W_LOCAL_HIGH, - LM83_REG_W_REMOTE1_HIGH, - LM83_REG_W_REMOTE2_HIGH, - LM83_REG_W_REMOTE3_HIGH, - LM83_REG_W_TCRIT, -}; - -/* - * Functions declaration - */ - -static int lm83_attach_adapter(struct i2c_adapter *adapter); -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind); -static int lm83_detach_client(struct i2c_client *client); -static struct lm83_data *lm83_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver lm83_driver = { - .owner = THIS_MODULE, - .name = "lm83", - .id = I2C_DRIVERID_LM83, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm83_attach_adapter, - .detach_client = lm83_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct lm83_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - s8 temp[9]; /* 0..3: input 1-4, - 4..7: high limit 1-4, - 8 : critical limit */ - u16 alarms; /* bitvector, combined */ -}; - -/* - * Sysfs stuff - */ - -static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm83_data *data = lm83_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); -} - -static ssize_t set_temp(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm83_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - int nr = attr->index; - - down(&data->update_lock); - data->temp[nr] = TEMP_TO_REG(val); - i2c_smbus_write_byte_data(client, LM83_REG_W_HIGH[nr - 4], - data->temp[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm83_data *data = lm83_update_device(dev); - return sprintf(buf, "%d\n", data->alarms); -} - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); -static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); -static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, - set_temp, 4); -static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp, - set_temp, 5); -static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp, - set_temp, 6); -static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp, - set_temp, 7); -static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, 8); -static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp, NULL, 8); -static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp, - set_temp, 8); -static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp, NULL, 8); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* - * Real code - */ - -static int lm83_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm83_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm83_data *data; - int err = 0; - const char *name = ""; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct lm83_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm83_data)); - - /* The common I2C client data is placed right after the - * LM83-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm83_driver; - new_client->flags = 0; - - /* Now we do the detection and identification. A negative kind - * means that the driver was loaded with no force parameter - * (default), so we must both detect and identify the chip - * (actually there is only one possible kind of chip for now, LM83). - * A zero kind means that the driver was loaded with the force - * parameter, the detection step shall be skipped. A positive kind - * means that the driver was loaded with the force parameter and a - * given kind of chip is requested, so both the detection and the - * identification steps are skipped. */ - - /* Default to an LM83 if forced */ - if (kind == 0) - kind = lm83; - - if (kind < 0) { /* detection */ - if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) - & 0xA8) != 0x00) || - ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) - & 0x48) != 0x00) || - ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) - & 0x41) != 0x00)) { - dev_dbg(&adapter->dev, - "LM83 detection failed at 0x%02x.\n", address); - goto exit_free; - } - } - - if (kind <= 0) { /* identification */ - u8 man_id, chip_id; - - man_id = i2c_smbus_read_byte_data(new_client, - LM83_REG_R_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM83_REG_R_CHIP_ID); - - if (man_id == 0x01) { /* National Semiconductor */ - if (chip_id == 0x03) { - kind = lm83; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; - } - } - - if (kind == lm83) { - name = "lm83"; - } - - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* - * Initialize the LM83 chip - * (Nothing to do for this one.) - */ - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp4_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp4_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp3_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp4_crit.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int lm83_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static struct lm83_data *lm83_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm83_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - int nr; - - dev_dbg(&client->dev, "Updating lm83 data.\n"); - for (nr = 0; nr < 9; nr++) { - data->temp[nr] = - i2c_smbus_read_byte_data(client, - LM83_REG_R_TEMP[nr]); - } - data->alarms = - i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS1) - + (i2c_smbus_read_byte_data(client, LM83_REG_R_STATUS2) - << 8); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm83_init(void) -{ - return i2c_add_driver(&lm83_driver); -} - -static void __exit sensors_lm83_exit(void) -{ - i2c_del_driver(&lm83_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("LM83 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm83_init); -module_exit(sensors_lm83_exit); diff --git a/drivers/i2c/chips/lm85.c b/drivers/i2c/chips/lm85.c deleted file mode 100644 index b4d7fd418264..000000000000 --- a/drivers/i2c/chips/lm85.c +++ /dev/null @@ -1,1575 +0,0 @@ -/* - lm85.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com> - Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de> - Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com> - - Chip details at <http://www.national.com/ds/LM/LM85.pdf> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); - -/* The LM85 registers */ - -#define LM85_REG_IN(nr) (0x20 + (nr)) -#define LM85_REG_IN_MIN(nr) (0x44 + (nr) * 2) -#define LM85_REG_IN_MAX(nr) (0x45 + (nr) * 2) - -#define LM85_REG_TEMP(nr) (0x25 + (nr)) -#define LM85_REG_TEMP_MIN(nr) (0x4e + (nr) * 2) -#define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2) - -/* Fan speeds are LSB, MSB (2 bytes) */ -#define LM85_REG_FAN(nr) (0x28 + (nr) *2) -#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) *2) - -#define LM85_REG_PWM(nr) (0x30 + (nr)) - -#define ADT7463_REG_OPPOINT(nr) (0x33 + (nr)) - -#define ADT7463_REG_TMIN_CTL1 0x36 -#define ADT7463_REG_TMIN_CTL2 0x37 - -#define LM85_REG_DEVICE 0x3d -#define LM85_REG_COMPANY 0x3e -#define LM85_REG_VERSTEP 0x3f -/* These are the recognized values for the above regs */ -#define LM85_DEVICE_ADX 0x27 -#define LM85_COMPANY_NATIONAL 0x01 -#define LM85_COMPANY_ANALOG_DEV 0x41 -#define LM85_COMPANY_SMSC 0x5c -#define LM85_VERSTEP_VMASK 0xf0 -#define LM85_VERSTEP_GENERIC 0x60 -#define LM85_VERSTEP_LM85C 0x60 -#define LM85_VERSTEP_LM85B 0x62 -#define LM85_VERSTEP_ADM1027 0x60 -#define LM85_VERSTEP_ADT7463 0x62 -#define LM85_VERSTEP_ADT7463C 0x6A -#define LM85_VERSTEP_EMC6D100_A0 0x60 -#define LM85_VERSTEP_EMC6D100_A1 0x61 -#define LM85_VERSTEP_EMC6D102 0x65 - -#define LM85_REG_CONFIG 0x40 - -#define LM85_REG_ALARM1 0x41 -#define LM85_REG_ALARM2 0x42 - -#define LM85_REG_VID 0x43 - -/* Automated FAN control */ -#define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) -#define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) -#define LM85_REG_AFAN_SPIKE1 0x62 -#define LM85_REG_AFAN_SPIKE2 0x63 -#define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) -#define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) -#define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) -#define LM85_REG_AFAN_HYST1 0x6d -#define LM85_REG_AFAN_HYST2 0x6e - -#define LM85_REG_TACH_MODE 0x74 -#define LM85_REG_SPINUP_CTL 0x75 - -#define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr)) -#define ADM1027_REG_CONFIG2 0x73 -#define ADM1027_REG_INTMASK1 0x74 -#define ADM1027_REG_INTMASK2 0x75 -#define ADM1027_REG_EXTEND_ADC1 0x76 -#define ADM1027_REG_EXTEND_ADC2 0x77 -#define ADM1027_REG_CONFIG3 0x78 -#define ADM1027_REG_FAN_PPR 0x7b - -#define ADT7463_REG_THERM 0x79 -#define ADT7463_REG_THERM_LIMIT 0x7A - -#define EMC6D100_REG_ALARM3 0x7d -/* IN5, IN6 and IN7 */ -#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5)) -#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2) -#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2) -#define EMC6D102_REG_EXTEND_ADC1 0x85 -#define EMC6D102_REG_EXTEND_ADC2 0x86 -#define EMC6D102_REG_EXTEND_ADC3 0x87 -#define EMC6D102_REG_EXTEND_ADC4 0x88 - -#define LM85_ALARM_IN0 0x0001 -#define LM85_ALARM_IN1 0x0002 -#define LM85_ALARM_IN2 0x0004 -#define LM85_ALARM_IN3 0x0008 -#define LM85_ALARM_TEMP1 0x0010 -#define LM85_ALARM_TEMP2 0x0020 -#define LM85_ALARM_TEMP3 0x0040 -#define LM85_ALARM_ALARM2 0x0080 -#define LM85_ALARM_IN4 0x0100 -#define LM85_ALARM_RESERVED 0x0200 -#define LM85_ALARM_FAN1 0x0400 -#define LM85_ALARM_FAN2 0x0800 -#define LM85_ALARM_FAN3 0x1000 -#define LM85_ALARM_FAN4 0x2000 -#define LM85_ALARM_TEMP1_FAULT 0x4000 -#define LM85_ALARM_TEMP3_FAULT 0x8000 - - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - */ - -/* IN are scaled acording to built-in resistors */ -static int lm85_scaling[] = { /* .001 Volts */ - 2500, 2250, 3300, 5000, 12000, - 3300, 1500, 1800 /*EMC6D100*/ - }; -#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) - -#define INS_TO_REG(n,val) \ - SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255) - -#define INSEXT_FROM_REG(n,val,ext,scale) \ - SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n]) - -#define INS_FROM_REG(n,val) INSEXT_FROM_REG(n,val,0,1) - -/* FAN speed is measured using 90kHz clock */ -#define FAN_TO_REG(val) (SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534)) -#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val)) - -/* Temperature is reported in .001 degC increments */ -#define TEMP_TO_REG(val) \ - SENSORS_LIMIT(SCALE(val,1000,1),-127,127) -#define TEMPEXT_FROM_REG(val,ext,scale) \ - SCALE((val)*scale + (ext),scale,1000) -#define TEMP_FROM_REG(val) \ - TEMPEXT_FROM_REG(val,0,1) - -#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) -#define PWM_FROM_REG(val) (val) - - -/* ZONEs have the following parameters: - * Limit (low) temp, 1. degC - * Hysteresis (below limit), 1. degC (0-15) - * Range of speed control, .1 degC (2-80) - * Critical (high) temp, 1. degC - * - * FAN PWMs have the following parameters: - * Reference Zone, 1, 2, 3, etc. - * Spinup time, .05 sec - * PWM value at limit/low temp, 1 count - * PWM Frequency, 1. Hz - * PWM is Min or OFF below limit, flag - * Invert PWM output, flag - * - * Some chips filter the temp, others the fan. - * Filter constant (or disabled) .1 seconds - */ - -/* These are the zone temperature range encodings in .001 degree C */ -static int lm85_range_map[] = { - 2000, 2500, 3300, 4000, 5000, 6600, - 8000, 10000, 13300, 16000, 20000, 26600, - 32000, 40000, 53300, 80000 - }; -static int RANGE_TO_REG( int range ) -{ - int i; - - if ( range < lm85_range_map[0] ) { - return 0 ; - } else if ( range > lm85_range_map[15] ) { - return 15 ; - } else { /* find closest match */ - for ( i = 14 ; i >= 0 ; --i ) { - if ( range > lm85_range_map[i] ) { /* range bracketed */ - if ((lm85_range_map[i+1] - range) < - (range - lm85_range_map[i])) { - i++; - break; - } - break; - } - } - } - return( i & 0x0f ); -} -#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) - -/* These are the Acoustic Enhancement, or Temperature smoothing encodings - * NOTE: The enable/disable bit is INCLUDED in these encodings as the - * MSB (bit 3, value 8). If the enable bit is 0, the encoded value - * is ignored, or set to 0. - */ -/* These are the PWM frequency encodings */ -static int lm85_freq_map[] = { /* .1 Hz */ - 100, 150, 230, 300, 380, 470, 620, 940 - }; -static int FREQ_TO_REG( int freq ) -{ - int i; - - if( freq >= lm85_freq_map[7] ) { return 7 ; } - for( i = 0 ; i < 7 ; ++i ) - if( freq <= lm85_freq_map[i] ) - break ; - return( i & 0x07 ); -} -#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07]) - -/* Since we can't use strings, I'm abusing these numbers - * to stand in for the following meanings: - * 1 -- PWM responds to Zone 1 - * 2 -- PWM responds to Zone 2 - * 3 -- PWM responds to Zone 3 - * 23 -- PWM responds to the higher temp of Zone 2 or 3 - * 123 -- PWM responds to highest of Zone 1, 2, or 3 - * 0 -- PWM is always at 0% (ie, off) - * -1 -- PWM is always at 100% - * -2 -- PWM responds to manual control - */ - -static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; -#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07]) - -static int ZONE_TO_REG( int zone ) -{ - int i; - - for( i = 0 ; i <= 7 ; ++i ) - if( zone == lm85_zone_map[i] ) - break ; - if( i > 7 ) /* Not found. */ - i = 3; /* Always 100% */ - return( (i & 0x07)<<5 ); -} - -#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15)) -#define HYST_FROM_REG(val) ((val)*1000) - -#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127)) -#define OFFSET_FROM_REG(val) ((val)*25) - -#define PPR_MASK(fan) (0x03<<(fan *2)) -#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2)) -#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1) - -/* i2c-vid.h defines vid_from_reg() */ -#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm))) - -/* Unlike some other drivers we DO NOT set initial limits. Use - * the config file to set limits. Some users have reported - * motherboards shutting down when we set limits in a previous - * version of the driver. - */ - -/* Chip sampling rates - * - * Some sensors are not updated more frequently than once per second - * so it doesn't make sense to read them more often than that. - * We cache the results and return the saved data if the driver - * is called again before a second has elapsed. - * - * Also, there is significant configuration data for this chip - * given the automatic PWM fan control that is possible. There - * are about 47 bytes of config data to only 22 bytes of actual - * readings. So, we keep the config data up to date in the cache - * when it is written and only sample it once every 1 *minute* - */ -#define LM85_DATA_INTERVAL (HZ + HZ / 2) -#define LM85_CONFIG_INTERVAL (1 * 60 * HZ) - -/* For each registered LM85, we need to keep some data in memory. That - data is pointed to by lm85_list[NR]->data. The structure itself is - dynamically allocated, at the same time when a new lm85 client is - allocated. */ - -/* LM85 can automatically adjust fan speeds based on temperature - * This structure encapsulates an entire Zone config. There are - * three zones (one for each temperature input) on the lm85 - */ -struct lm85_zone { - s8 limit; /* Low temp limit */ - u8 hyst; /* Low limit hysteresis. (0-15) */ - u8 range; /* Temp range, encoded */ - s8 critical; /* "All fans ON" temp limit */ - u8 off_desired; /* Actual "off" temperature specified. Preserved - * to prevent "drift" as other autofan control - * values change. - */ - u8 max_desired; /* Actual "max" temperature specified. Preserved - * to prevent "drift" as other autofan control - * values change. - */ -}; - -struct lm85_autofan { - u8 config; /* Register value */ - u8 freq; /* PWM frequency, encoded */ - u8 min_pwm; /* Minimum PWM value, encoded */ - u8 min_off; /* Min PWM or OFF below "limit", flag */ -}; - -struct lm85_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - int valid; /* !=0 if following fields are valid */ - unsigned long last_reading; /* In jiffies */ - unsigned long last_config; /* In jiffies */ - - u8 in[8]; /* Register value */ - u8 in_max[8]; /* Register value */ - u8 in_min[8]; /* Register value */ - s8 temp[3]; /* Register value */ - s8 temp_min[3]; /* Register value */ - s8 temp_max[3]; /* Register value */ - s8 temp_offset[3]; /* Register value */ - u16 fan[4]; /* Register value */ - u16 fan_min[4]; /* Register value */ - u8 pwm[3]; /* Register value */ - u8 spinup_ctl; /* Register encoding, combined */ - u8 tach_mode; /* Register encoding, combined */ - u8 temp_ext[3]; /* Decoded values */ - u8 in_ext[8]; /* Decoded values */ - u8 adc_scale; /* ADC Extended bits scaling factor */ - u8 fan_ppr; /* Register value */ - u8 smooth[3]; /* Register encoding */ - u8 vid; /* Register value */ - u8 vrm; /* VRM version */ - u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ - u8 oppoint[3]; /* Register value */ - u16 tmin_ctl; /* Register value */ - unsigned long therm_total; /* Cummulative therm count */ - u8 therm_limit; /* Register value */ - u32 alarms; /* Register encoding, combined */ - struct lm85_autofan autofan[3]; - struct lm85_zone zone[3]; -}; - -static int lm85_attach_adapter(struct i2c_adapter *adapter); -static int lm85_detect(struct i2c_adapter *adapter, int address, - int kind); -static int lm85_detach_client(struct i2c_client *client); - -static int lm85_read_value(struct i2c_client *client, u8 register); -static int lm85_write_value(struct i2c_client *client, u8 register, int value); -static struct lm85_data *lm85_update_device(struct device *dev); -static void lm85_init_client(struct i2c_client *client); - - -static struct i2c_driver lm85_driver = { - .owner = THIS_MODULE, - .name = "lm85", - .id = I2C_DRIVERID_LM85, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm85_attach_adapter, - .detach_client = lm85_detach_client, -}; - - -/* 4 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) ); -} -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) ); -} -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val); - lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \ - NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -show_fan_offset(1); -show_fan_offset(2); -show_fan_offset(3); -show_fan_offset(4); - -/* vid, vrm, alarms */ - -static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); -} - -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); - -static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->vrm); -} - -static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - data->vrm = val; - return count; -} - -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); - -static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); - -/* pwm */ - -static ssize_t show_pwm(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) ); -} -static ssize_t set_pwm(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->pwm[nr] = PWM_TO_REG(val); - lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - int pwm_zone; - - pwm_zone = ZONE_FROM_REG(data->autofan[nr].config); - return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) ); -} - -#define show_pwm_reg(offset) \ -static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm_enable##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm_enable(dev, buf, offset - 1); \ -} \ -static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_pwm_##offset, set_pwm_##offset); \ -static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, \ - show_pwm_enable##offset, NULL); - -show_pwm_reg(1); -show_pwm_reg(2); -show_pwm_reg(3); - -/* Voltages */ - -static ssize_t show_in(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr, - data->in[nr], - data->in_ext[nr], - data->adc_scale) ); -} -static ssize_t show_in_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) ); -} -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = INS_TO_REG(nr, val); - lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_in_max(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) ); -} -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = INS_TO_REG(nr, val); - lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); - return count; -} -#define show_in_reg(offset) \ -static ssize_t show_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static ssize_t show_in_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t show_in_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in_##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, \ - NULL); \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in_##offset##_min, set_in_##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in_##offset##_max, set_in_##offset##_max); - -show_in_reg(0); -show_in_reg(1); -show_in_reg(2); -show_in_reg(3); -show_in_reg(4); - -/* Temps */ - -static ssize_t show_temp(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr], - data->temp_ext[nr], - data->adc_scale) ); -} -static ssize_t show_temp_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) ); -} -static ssize_t set_temp_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_min[nr] = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t show_temp_max(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) ); -} -static ssize_t set_temp_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_max[nr] = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); - up(&data->update_lock); - return count; -} -#define show_temp_reg(offset) \ -static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, offset - 1); \ -} \ -static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_max(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_max(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \ - NULL); \ -static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_min, set_temp_##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_max, set_temp_##offset##_max); - -show_temp_reg(1); -show_temp_reg(2); -show_temp_reg(3); - - -/* Automatic PWM control */ - -static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config)); -} -static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) - | ZONE_TO_REG(val) ; - lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), - data->autofan[nr].config); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); -} -static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].min_pwm = PWM_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr), - data->autofan[nr].min_pwm); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", data->autofan[nr].min_off); -} -static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].min_off = val; - lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0] - | data->syncpwm3 - | (data->autofan[0].min_off ? 0x20 : 0) - | (data->autofan[1].min_off ? 0x40 : 0) - | (data->autofan[2].min_off ? 0x80 : 0) - ); - up(&data->update_lock); - return count; -} -static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); -} -static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->autofan[nr].freq = FREQ_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - (data->zone[nr].range << 4) - | data->autofan[nr].freq - ); - up(&data->update_lock); - return count; -} -#define pwm_auto(offset) \ -static ssize_t show_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_channels(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_channels(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_pwm_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_pwm_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_pwm_minctl(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_pwm_auto_pwm_freq(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_channels, \ - set_pwm##offset##_auto_channels); \ -static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_pwm_min, \ - set_pwm##offset##_auto_pwm_min); \ -static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_pwm_minctl, \ - set_pwm##offset##_auto_pwm_minctl); \ -static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR, \ - show_pwm##offset##_auto_pwm_freq, \ - set_pwm##offset##_auto_pwm_freq); -pwm_auto(1); -pwm_auto(2); -pwm_auto(3); - -/* Temperature settings for automatic PWM control */ - -static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) - - HYST_FROM_REG(data->zone[nr].hyst)); -} -static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - int min; - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - min = TEMP_FROM_REG(data->zone[nr].limit); - data->zone[nr].off_desired = TEMP_TO_REG(val); - data->zone[nr].hyst = HYST_TO_REG(min - val); - if ( nr == 0 || nr == 1 ) { - lm85_write_value(client, LM85_REG_AFAN_HYST1, - (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); - } else { - lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); - } - up(&data->update_lock); - return count; -} -static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) ); -} -static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->zone[nr].limit = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr), - data->zone[nr].limit); - -/* Update temp_auto_max and temp_auto_range */ - data->zone[nr].range = RANGE_TO_REG( - TEMP_FROM_REG(data->zone[nr].max_desired) - - TEMP_FROM_REG(data->zone[nr].limit)); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); - -/* Update temp_auto_hyst and temp_auto_off */ - data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( - data->zone[nr].limit) - TEMP_FROM_REG( - data->zone[nr].off_desired)); - if ( nr == 0 || nr == 1 ) { - lm85_write_value(client, LM85_REG_AFAN_HYST1, - (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); - } else { - lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); - } - up(&data->update_lock); - return count; -} -static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) + - RANGE_FROM_REG(data->zone[nr].range)); -} -static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - int min; - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - min = TEMP_FROM_REG(data->zone[nr].limit); - data->zone[nr].max_desired = TEMP_TO_REG(val); - data->zone[nr].range = RANGE_TO_REG( - val - min); - lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), - ((data->zone[nr].range & 0x0f) << 4) - | (data->autofan[nr].freq & 0x07)); - up(&data->update_lock); - return count; -} -static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr) -{ - struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical)); -} -static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->zone[nr].critical = TEMP_TO_REG(val); - lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr), - data->zone[nr].critical); - up(&data->update_lock); - return count; -} -#define temp_auto(offset) \ -static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_off(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_off(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_max(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_max(dev, buf, count, offset - 1); \ -} \ -static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_auto_temp_crit(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_auto_temp_crit(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_off, \ - set_temp##offset##_auto_temp_off); \ -static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_min, \ - set_temp##offset##_auto_temp_min); \ -static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_max, \ - set_temp##offset##_auto_temp_max); \ -static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR, \ - show_temp##offset##_auto_temp_crit, \ - set_temp##offset##_auto_temp_crit); -temp_auto(1); -temp_auto(2); -temp_auto(3); - -int lm85_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm85_detect); -} - -int lm85_detect(struct i2c_adapter *adapter, int address, - int kind) -{ - int company, verstep ; - struct i2c_client *new_client = NULL; - struct lm85_data *data; - int err = 0; - const char *type_name = ""; - - if (i2c_is_isa_adapter(adapter)) { - /* This chip has no ISA interface */ - goto ERROR0 ; - }; - - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { - /* We need to be able to do byte I/O */ - goto ERROR0 ; - }; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm85_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR0; - } - memset(data, 0, sizeof(struct lm85_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm85_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - company = lm85_read_value(new_client, LM85_REG_COMPANY); - verstep = lm85_read_value(new_client, LM85_REG_VERSTEP); - - dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" - " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - i2c_adapter_id(new_client->adapter), new_client->addr, - company, verstep); - - /* If auto-detecting, Determine the chip type. */ - if (kind <= 0) { - dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n", - i2c_adapter_id(adapter), address ); - if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85C ) { - kind = lm85c ; - } else if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85B ) { - kind = lm85b ; - } else if( company == LM85_COMPANY_NATIONAL - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { - dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" - " Defaulting to LM85.\n", verstep); - kind = any_chip ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && verstep == LM85_VERSTEP_ADM1027 ) { - kind = adm1027 ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && (verstep == LM85_VERSTEP_ADT7463 - || verstep == LM85_VERSTEP_ADT7463C) ) { - kind = adt7463 ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { - dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( company == LM85_COMPANY_SMSC - && (verstep == LM85_VERSTEP_EMC6D100_A0 - || verstep == LM85_VERSTEP_EMC6D100_A1) ) { - /* Unfortunately, we can't tell a '100 from a '101 - * from the registers. Since a '101 is a '100 - * in a package with fewer pins and therefore no - * 3.3V, 1.5V or 1.8V inputs, perhaps if those - * inputs read 0, then it's a '101. - */ - kind = emc6d100 ; - } else if( company == LM85_COMPANY_SMSC - && verstep == LM85_VERSTEP_EMC6D102) { - kind = emc6d102 ; - } else if( company == LM85_COMPANY_SMSC - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "lm85: Detected SMSC chip\n"); - dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( kind == any_chip - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { - dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n"); - /* Leave kind as "any_chip" */ - } else { - dev_dbg(&adapter->dev, "Autodetection failed\n"); - /* Not an LM85 ... */ - if( kind == any_chip ) { /* User used force=x,y */ - dev_err(&adapter->dev, "Generic LM85 Version 6 not" - " found at %d,0x%02x. Try force_lm85c.\n", - i2c_adapter_id(adapter), address ); - } - err = 0 ; - goto ERROR1; - } - } - - /* Fill in the chip specific driver values */ - if ( kind == any_chip ) { - type_name = "lm85"; - } else if ( kind == lm85b ) { - type_name = "lm85b"; - } else if ( kind == lm85c ) { - type_name = "lm85c"; - } else if ( kind == adm1027 ) { - type_name = "adm1027"; - } else if ( kind == adt7463 ) { - type_name = "adt7463"; - } else if ( kind == emc6d100){ - type_name = "emc6d100"; - } else if ( kind == emc6d102 ) { - type_name = "emc6d102"; - } - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); - - /* Fill in the remaining client fields */ - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR1; - - /* Set the VRM version */ - data->vrm = i2c_which_vrm(); - - /* Initialize the LM85 chip */ - lm85_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan3_input); - device_create_file(&new_client->dev, &dev_attr_fan4_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan3_min); - device_create_file(&new_client->dev, &dev_attr_fan4_min); - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm3); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); - device_create_file(&new_client->dev, &dev_attr_pwm3_enable); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_vrm); - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl); - device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max); - device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit); - device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit); - - return 0; - - /* Error out and cleanup code */ - ERROR1: - kfree(data); - ERROR0: - return err; -} - -int lm85_detach_client(struct i2c_client *client) -{ - i2c_detach_client(client); - kfree(i2c_get_clientdata(client)); - return 0; -} - - -int lm85_read_value(struct i2c_client *client, u8 reg) -{ - int res; - - /* What size location is it? */ - switch( reg ) { - case LM85_REG_FAN(0) : /* Read WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : - case LM85_REG_ALARM1 : /* Read both bytes at once */ - res = i2c_smbus_read_byte_data(client, reg) & 0xff ; - res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Read WORD MSB, LSB */ - res = i2c_smbus_read_byte_data(client, reg) << 8 ; - res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ; - break ; - default: /* Read BYTE data */ - res = i2c_smbus_read_byte_data(client, reg); - break ; - } - - return res ; -} - -int lm85_write_value(struct i2c_client *client, u8 reg, int value) -{ - int res ; - - switch( reg ) { - case LM85_REG_FAN(0) : /* Write WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : - /* NOTE: ALARM is read only, so not included here */ - res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ; - res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Write WORD MSB, LSB */ - res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff); - res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ; - break ; - default: /* Write BYTE data */ - res = i2c_smbus_write_byte_data(client, reg, value); - break ; - } - - return res ; -} - -void lm85_init_client(struct i2c_client *client) -{ - int value; - struct lm85_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "Initializing device\n"); - - /* Warn if part was not "READY" */ - value = lm85_read_value(client, LM85_REG_CONFIG); - dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value); - if( value & 0x02 ) { - dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( ! (value & 0x04) ) { - dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( value & 0x10 - && ( data->type == adm1027 - || data->type == adt7463 ) ) { - dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. " - "Please report this to the lm85 maintainer.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - - /* WE INTENTIONALLY make no changes to the limits, - * offsets, pwms, fans and zones. If they were - * configured, we don't want to mess with them. - * If they weren't, the default is 100% PWM, no - * control and will suffice until 'sensors -s' - * can be run by the user. - */ - - /* Start monitoring */ - value = lm85_read_value(client, LM85_REG_CONFIG); - /* Try to clear LOCK, Set START, save everything else */ - value = (value & ~ 0x02) | 0x01 ; - dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); - lm85_write_value(client, LM85_REG_CONFIG, value); -} - -static struct lm85_data *lm85_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm85_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if ( !data->valid || - time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) { - /* Things that change quickly */ - dev_dbg(&client->dev, "Reading sensor values\n"); - - /* Have to read extended bits first to "freeze" the - * more significant bits that are read later. - */ - if ( (data->type == adm1027) || (data->type == adt7463) ) { - int ext1 = lm85_read_value(client, - ADM1027_REG_EXTEND_ADC1); - int ext2 = lm85_read_value(client, - ADM1027_REG_EXTEND_ADC2); - int val = (ext1 << 8) + ext2; - - for(i = 0; i <= 4; i++) - data->in_ext[i] = (val>>(i * 2))&0x03; - - for(i = 0; i <= 2; i++) - data->temp_ext[i] = (val>>((i + 5) * 2))&0x03; - } - - /* adc_scale is 2^(number of LSBs). There are 4 extra bits in - the emc6d102 and 2 in the adt7463 and adm1027. In all - other chips ext is always 0 and the value of scale is - irrelevant. So it is left in 4*/ - data->adc_scale = (data->type == emc6d102 ) ? 16 : 4; - - for (i = 0; i <= 4; ++i) { - data->in[i] = - lm85_read_value(client, LM85_REG_IN(i)); - } - - for (i = 0; i <= 3; ++i) { - data->fan[i] = - lm85_read_value(client, LM85_REG_FAN(i)); - } - - for (i = 0; i <= 2; ++i) { - data->temp[i] = - lm85_read_value(client, LM85_REG_TEMP(i)); - } - - for (i = 0; i <= 2; ++i) { - data->pwm[i] = - lm85_read_value(client, LM85_REG_PWM(i)); - } - - data->alarms = lm85_read_value(client, LM85_REG_ALARM1); - - if ( data->type == adt7463 ) { - if( data->therm_total < ULONG_MAX - 256 ) { - data->therm_total += - lm85_read_value(client, ADT7463_REG_THERM ); - } - } else if ( data->type == emc6d100 ) { - /* Three more voltage sensors */ - for (i = 5; i <= 7; ++i) { - data->in[i] = - lm85_read_value(client, EMC6D100_REG_IN(i)); - } - /* More alarm bits */ - data->alarms |= - lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; - } else if (data->type == emc6d102 ) { - /* Have to read LSB bits after the MSB ones because - the reading of the MSB bits has frozen the - LSBs (backward from the ADM1027). - */ - int ext1 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC1); - int ext2 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC2); - int ext3 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC3); - int ext4 = lm85_read_value(client, - EMC6D102_REG_EXTEND_ADC4); - data->in_ext[0] = ext3 & 0x0f; - data->in_ext[1] = ext4 & 0x0f; - data->in_ext[2] = (ext4 >> 4) & 0x0f; - data->in_ext[3] = (ext3 >> 4) & 0x0f; - data->in_ext[4] = (ext2 >> 4) & 0x0f; - - data->temp_ext[0] = ext1 & 0x0f; - data->temp_ext[1] = ext2 & 0x0f; - data->temp_ext[2] = (ext1 >> 4) & 0x0f; - } - - data->last_reading = jiffies ; - }; /* last_reading */ - - if ( !data->valid || - time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) { - /* Things that don't change often */ - dev_dbg(&client->dev, "Reading config values\n"); - - for (i = 0; i <= 4; ++i) { - data->in_min[i] = - lm85_read_value(client, LM85_REG_IN_MIN(i)); - data->in_max[i] = - lm85_read_value(client, LM85_REG_IN_MAX(i)); - } - - if ( data->type == emc6d100 ) { - for (i = 5; i <= 7; ++i) { - data->in_min[i] = - lm85_read_value(client, EMC6D100_REG_IN_MIN(i)); - data->in_max[i] = - lm85_read_value(client, EMC6D100_REG_IN_MAX(i)); - } - } - - for (i = 0; i <= 3; ++i) { - data->fan_min[i] = - lm85_read_value(client, LM85_REG_FAN_MIN(i)); - } - - for (i = 0; i <= 2; ++i) { - data->temp_min[i] = - lm85_read_value(client, LM85_REG_TEMP_MIN(i)); - data->temp_max[i] = - lm85_read_value(client, LM85_REG_TEMP_MAX(i)); - } - - data->vid = lm85_read_value(client, LM85_REG_VID); - - for (i = 0; i <= 2; ++i) { - int val ; - data->autofan[i].config = - lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); - val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->autofan[i].freq = val & 0x07 ; - data->zone[i].range = (val >> 4) & 0x0f ; - data->autofan[i].min_pwm = - lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); - data->zone[i].limit = - lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); - data->zone[i].critical = - lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); - } - - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); - data->smooth[0] = i & 0x0f ; - data->syncpwm3 = i & 0x10 ; /* Save PWM3 config */ - data->autofan[0].min_off = (i & 0x20) != 0 ; - data->autofan[1].min_off = (i & 0x40) != 0 ; - data->autofan[2].min_off = (i & 0x80) != 0 ; - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); - data->smooth[1] = (i>>4) & 0x0f ; - data->smooth[2] = i & 0x0f ; - - i = lm85_read_value(client, LM85_REG_AFAN_HYST1); - data->zone[0].hyst = (i>>4) & 0x0f ; - data->zone[1].hyst = i & 0x0f ; - - i = lm85_read_value(client, LM85_REG_AFAN_HYST2); - data->zone[2].hyst = (i>>4) & 0x0f ; - - if ( (data->type == lm85b) || (data->type == lm85c) ) { - data->tach_mode = lm85_read_value(client, - LM85_REG_TACH_MODE ); - data->spinup_ctl = lm85_read_value(client, - LM85_REG_SPINUP_CTL ); - } else if ( (data->type == adt7463) || (data->type == adm1027) ) { - if ( data->type == adt7463 ) { - for (i = 0; i <= 2; ++i) { - data->oppoint[i] = lm85_read_value(client, - ADT7463_REG_OPPOINT(i) ); - } - data->tmin_ctl = lm85_read_value(client, - ADT7463_REG_TMIN_CTL1 ); - data->therm_limit = lm85_read_value(client, - ADT7463_REG_THERM_LIMIT ); - } - for (i = 0; i <= 2; ++i) { - data->temp_offset[i] = lm85_read_value(client, - ADM1027_REG_TEMP_OFFSET(i) ); - } - data->tach_mode = lm85_read_value(client, - ADM1027_REG_CONFIG3 ); - data->fan_ppr = lm85_read_value(client, - ADM1027_REG_FAN_PPR ); - } - - data->last_config = jiffies; - }; /* last_config */ - - data->valid = 1; - - up(&data->update_lock); - - return data; -} - - -static int __init sm_lm85_init(void) -{ - return i2c_add_driver(&lm85_driver); -} - -static void __exit sm_lm85_exit(void) -{ - i2c_del_driver(&lm85_driver); -} - -/* Thanks to Richard Barrington for adding the LM85 to sensors-detect. - * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with - * post 2.7.0 CVS changes. - */ -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com"); -MODULE_DESCRIPTION("LM85-B, LM85-C driver"); - -module_init(sm_lm85_init); -module_exit(sm_lm85_exit); diff --git a/drivers/i2c/chips/lm87.c b/drivers/i2c/chips/lm87.c deleted file mode 100644 index 1921ed1af182..000000000000 --- a/drivers/i2c/chips/lm87.c +++ /dev/null @@ -1,828 +0,0 @@ -/* - * lm87.c - * - * Copyright (C) 2000 Frodo Looijaard <frodol@dds.nl> - * Philip Edelbrock <phil@netroedge.com> - * Stephen Rousset <stephen.rousset@rocketlogix.com> - * Dan Eaton <dan.eaton@rocketlogix.com> - * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> - * - * Original port to Linux 2.6 by Jeff Oliver. - * - * The LM87 is a sensor chip made by National Semiconductor. It monitors up - * to 8 voltages (including its own power source), up to three temperatures - * (its own plus up to two external ones) and up to two fans. The default - * configuration is 6 voltages, two temperatures and two fans (see below). - * Voltages are scaled internally with ratios such that the nominal value of - * each voltage correspond to a register value of 192 (which means a - * resolution of about 0.5% of the nominal value). Temperature values are - * reported with a 1 deg resolution and a 3-4 deg accuracy. Complete - * datasheet can be obtained from National's website at: - * http://www.national.com/pf/LM/LM87.html - * - * Some functions share pins, so not all functions are available at the same - * time. Which are depends on the hardware setup. This driver assumes that - * the BIOS configured the chip correctly. In that respect, it differs from - * the original driver (from lm_sensors for Linux 2.4), which would force the - * LM87 to an arbitrary, compile-time chosen mode, regardless of the actual - * chipset wiring. - * For reference, here is the list of exclusive functions: - * - in0+in5 (default) or temp3 - * - fan1 (default) or in6 - * - fan2 (default) or in7 - * - VID lines (default) or IRQ lines (not handled by this driver) - * - * The LM87 additionally features an analog output, supposedly usable to - * control the speed of a fan. All new chips use pulse width modulation - * instead. The LM87 is the only hardware monitoring chipset I know of - * which uses amplitude modulation. Be careful when using this feature. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> - -/* - * Addresses to scan - * LM87 has three possible addresses: 0x2c, 0x2d and 0x2e. - */ - -static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(lm87); - -/* - * The LM87 registers - */ - -/* nr in 0..5 */ -#define LM87_REG_IN(nr) (0x20 + (nr)) -#define LM87_REG_IN_MAX(nr) (0x2B + (nr) * 2) -#define LM87_REG_IN_MIN(nr) (0x2C + (nr) * 2) -/* nr in 0..1 */ -#define LM87_REG_AIN(nr) (0x28 + (nr)) -#define LM87_REG_AIN_MIN(nr) (0x1A + (nr)) -#define LM87_REG_AIN_MAX(nr) (0x3B + (nr)) - -static u8 LM87_REG_TEMP[3] = { 0x27, 0x26, 0x20 }; -static u8 LM87_REG_TEMP_HIGH[3] = { 0x39, 0x37, 0x2B }; -static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C }; - -#define LM87_REG_TEMP_HW_INT_LOCK 0x13 -#define LM87_REG_TEMP_HW_EXT_LOCK 0x14 -#define LM87_REG_TEMP_HW_INT 0x17 -#define LM87_REG_TEMP_HW_EXT 0x18 - -/* nr in 0..1 */ -#define LM87_REG_FAN(nr) (0x28 + (nr)) -#define LM87_REG_FAN_MIN(nr) (0x3B + (nr)) -#define LM87_REG_AOUT 0x19 - -#define LM87_REG_CONFIG 0x40 -#define LM87_REG_CHANNEL_MODE 0x16 -#define LM87_REG_VID_FAN_DIV 0x47 -#define LM87_REG_VID4 0x49 - -#define LM87_REG_ALARMS1 0x41 -#define LM87_REG_ALARMS2 0x42 - -#define LM87_REG_COMPANY_ID 0x3E -#define LM87_REG_REVISION 0x3F - -/* - * Conversions and various macros - * The LM87 uses signed 8-bit values for temperatures. - */ - -#define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192) -#define IN_TO_REG(val,scale) ((val) <= 0 ? 0 : \ - (val) * 192 >= (scale) * 255 ? 255 : \ - ((val) * 192 + (scale)/2) / (scale)) - -#define TEMP_FROM_REG(reg) ((reg) * 1000) -#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \ - (val) >= 126500 ? 127 : \ - (((val) < 0 ? (val)-500 : (val)+500) / 1000)) - -#define FAN_FROM_REG(reg,div) ((reg) == 255 || (reg) == 0 ? 0 : \ - 1350000 + (reg)*(div) / 2) / ((reg)*(div)) -#define FAN_TO_REG(val,div) ((val)*(div) * 255 <= 1350000 ? 255 : \ - (1350000 + (val)*(div) / 2) / ((val)*(div))) - -#define FAN_DIV_FROM_REG(reg) (1 << (reg)) - -/* analog out is 9.80mV/LSB */ -#define AOUT_FROM_REG(reg) (((reg) * 98 + 5) / 10) -#define AOUT_TO_REG(val) ((val) <= 0 ? 0 : \ - (val) >= 2500 ? 255 : \ - ((val) * 10 + 49) / 98) - -/* nr in 0..1 */ -#define CHAN_NO_FAN(nr) (1 << (nr)) -#define CHAN_TEMP3 (1 << 2) -#define CHAN_VCC_5V (1 << 3) -#define CHAN_NO_VID (1 << 8) - -/* - * Functions declaration - */ - -static int lm87_attach_adapter(struct i2c_adapter *adapter); -static int lm87_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm87_init_client(struct i2c_client *client); -static int lm87_detach_client(struct i2c_client *client); -static struct lm87_data *lm87_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver lm87_driver = { - .owner = THIS_MODULE, - .name = "lm87", - .id = I2C_DRIVERID_LM87, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm87_attach_adapter, - .detach_client = lm87_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct lm87_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 channel; /* register value */ - - u8 in[8]; /* register value */ - u8 in_max[8]; /* register value */ - u8 in_min[8]; /* register value */ - u16 in_scale[8]; - - s8 temp[3]; /* register value */ - s8 temp_high[3]; /* register value */ - s8 temp_low[3]; /* register value */ - s8 temp_crit_int; /* min of two register values */ - s8 temp_crit_ext; /* min of two register values */ - - u8 fan[2]; /* register value */ - u8 fan_min[2]; /* register value */ - u8 fan_div[2]; /* register value, shifted right */ - u8 aout; /* register value */ - - u16 alarms; /* register values, combined */ - u8 vid; /* register values, combined */ - u8 vrm; -}; - -/* - * Sysfs stuff - */ - -static inline int lm87_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static inline int lm87_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - -#define show_in(offset) \ -static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ - data->in_scale[offset])); \ -} \ -static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ - data->in_scale[offset])); \ -} \ -static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ - data->in_scale[offset])); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in##offset##_input, NULL); -show_in(0); -show_in(1); -show_in(2); -show_in(3); -show_in(4); -show_in(5); -show_in(6); -show_in(7); - -static void set_in_min(struct device *dev, const char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val, data->in_scale[nr]); - lm87_write_value(client, nr<6 ? LM87_REG_IN_MIN(nr) : - LM87_REG_AIN_MIN(nr-6), data->in_min[nr]); - up(&data->update_lock); -} - -static void set_in_max(struct device *dev, const char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val, data->in_scale[nr]); - lm87_write_value(client, nr<6 ? LM87_REG_IN_MAX(nr) : - LM87_REG_AIN_MAX(nr-6), data->in_max[nr]); - up(&data->update_lock); -} - -#define set_in(offset) \ -static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - set_in_min(dev, buf, offset); \ - return count; \ -} \ -static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - set_in_max(dev, buf, offset); \ - return count; \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); -set_in(0); -set_in(1); -set_in(2); -set_in(3); -set_in(4); -set_in(5); -set_in(6); -set_in(7); - -#define show_temp(offset) \ -static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ -} \ -static ssize_t show_temp##offset##_low(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[offset-1])); \ -} \ -static ssize_t show_temp##offset##_high(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[offset-1])); \ -}\ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp##offset##_input, NULL); -show_temp(1); -show_temp(2); -show_temp(3); - -static void set_temp_low(struct device *dev, const char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_low[nr] = TEMP_TO_REG(val); - lm87_write_value(client, LM87_REG_TEMP_LOW[nr], data->temp_low[nr]); - up(&data->update_lock); -} - -static void set_temp_high(struct device *dev, const char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_high[nr] = TEMP_TO_REG(val); - lm87_write_value(client, LM87_REG_TEMP_HIGH[nr], data->temp_high[nr]); - up(&data->update_lock); -} - -#define set_temp(offset) \ -static ssize_t set_temp##offset##_low(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - set_temp_low(dev, buf, offset-1); \ - return count; \ -} \ -static ssize_t set_temp##offset##_high(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - set_temp_high(dev, buf, offset-1); \ - return count; \ -} \ -static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp##offset##_high, set_temp##offset##_high); \ -static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ - show_temp##offset##_low, set_temp##offset##_low); -set_temp(1); -set_temp(2); -set_temp(3); - -static ssize_t show_temp_crit_int(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm87_data *data = lm87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_int)); -} - -static ssize_t show_temp_crit_ext(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm87_data *data = lm87_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit_ext)); -} - -static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit_int, NULL); -static DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit_ext, NULL); -static DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit_ext, NULL); - -#define show_fan(offset) \ -static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[offset-1], \ - FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \ -} \ -static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[offset-1], \ - FAN_DIV_FROM_REG(data->fan_div[offset-1]))); \ -} \ -static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm87_data *data = lm87_update_device(dev); \ - return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[offset-1])); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan##offset##_input, NULL); -show_fan(1); -show_fan(2); - -static void set_fan_min(struct device *dev, const char *buf, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, - FAN_DIV_FROM_REG(data->fan_div[nr])); - lm87_write_value(client, LM87_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan clock divider. This follows the principle - of least suprise; the user doesn't expect the fan minimum to change just - because the divider changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - unsigned long min; - u8 reg; - - down(&data->update_lock); - min = FAN_FROM_REG(data->fan_min[nr], - FAN_DIV_FROM_REG(data->fan_div[nr])); - - switch (val) { - case 1: data->fan_div[nr] = 0; break; - case 2: data->fan_div[nr] = 1; break; - case 4: data->fan_div[nr] = 2; break; - case 8: data->fan_div[nr] = 3; break; - default: - up(&data->update_lock); - return -EINVAL; - } - - reg = lm87_read_value(client, LM87_REG_VID_FAN_DIV); - switch (nr) { - case 0: - reg = (reg & 0xCF) | (data->fan_div[0] << 4); - break; - case 1: - reg = (reg & 0x3F) | (data->fan_div[1] << 6); - break; - } - lm87_write_value(client, LM87_REG_VID_FAN_DIV, reg); - - data->fan_min[nr] = FAN_TO_REG(min, val); - lm87_write_value(client, LM87_REG_FAN_MIN(nr), - data->fan_min[nr]); - up(&data->update_lock); - - return count; -} - -#define set_fan(offset) \ -static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - set_fan_min(dev, buf, offset-1); \ - return count; \ -} \ -static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_fan_div(dev, buf, count, offset-1); \ -} \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan##offset##_min, set_fan##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan##offset##_div, set_fan##offset##_div); -set_fan(1); -set_fan(2); - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm87_data *data = lm87_update_device(dev); - return sprintf(buf, "%d\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm87_data *data = lm87_update_device(dev); - return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); - -static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm87_data *data = lm87_update_device(dev); - return sprintf(buf, "%d\n", data->vrm); -} -static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - data->vrm = simple_strtoul(buf, NULL, 10); - return count; -} -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); - -static ssize_t show_aout(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm87_data *data = lm87_update_device(dev); - return sprintf(buf, "%d\n", AOUT_FROM_REG(data->aout)); -} -static ssize_t set_aout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->aout = AOUT_TO_REG(val); - lm87_write_value(client, LM87_REG_AOUT, data->aout); - up(&data->update_lock); - return count; -} -static DEVICE_ATTR(aout_output, S_IRUGO | S_IWUSR, show_aout, set_aout); - -/* - * Real code - */ - -static int lm87_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm87_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm87_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct lm87_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm87_data)); - - /* The common I2C client data is placed right before the - LM87-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm87_driver; - new_client->flags = 0; - - /* Default to an LM87 if forced */ - if (kind == 0) - kind = lm87; - - /* Now, we do the remaining detection. */ - if (kind < 0) { - u8 rev = lm87_read_value(new_client, LM87_REG_REVISION); - - if (rev < 0x01 || rev > 0x08 - || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80) - || lm87_read_value(new_client, LM87_REG_COMPANY_ID) != 0x02) { - dev_dbg(&adapter->dev, - "LM87 detection failed at 0x%02x.\n", - address); - goto exit_free; - } - } - - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, "lm87", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the LM87 chip */ - lm87_init_client(new_client); - - data->in_scale[0] = 2500; - data->in_scale[1] = 2700; - data->in_scale[2] = (data->channel & CHAN_VCC_5V) ? 5000 : 3300; - data->in_scale[3] = 5000; - data->in_scale[4] = 12000; - data->in_scale[5] = 2700; - data->in_scale[6] = 1875; - data->in_scale[7] = 1875; - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - - if (data->channel & CHAN_NO_FAN(0)) { - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in6_max); - } else { - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - } - if (data->channel & CHAN_NO_FAN(1)) { - device_create_file(&new_client->dev, &dev_attr_in7_input); - device_create_file(&new_client->dev, &dev_attr_in7_min); - device_create_file(&new_client->dev, &dev_attr_in7_max); - } else { - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - } - - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - - if (data->channel & CHAN_TEMP3) { - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp3_crit); - } else { - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in5_max); - } - - if (!(data->channel & CHAN_NO_VID)) { - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); - } - - device_create_file(&new_client->dev, &dev_attr_alarms); - device_create_file(&new_client->dev, &dev_attr_aout_output); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static void lm87_init_client(struct i2c_client *client) -{ - struct lm87_data *data = i2c_get_clientdata(client); - u8 config; - - data->channel = lm87_read_value(client, LM87_REG_CHANNEL_MODE); - data->vrm = i2c_which_vrm(); - - config = lm87_read_value(client, LM87_REG_CONFIG); - if (!(config & 0x01)) { - int i; - - /* Limits are left uninitialized after power-up */ - for (i = 1; i < 6; i++) { - lm87_write_value(client, LM87_REG_IN_MIN(i), 0x00); - lm87_write_value(client, LM87_REG_IN_MAX(i), 0xFF); - } - for (i = 0; i < 2; i++) { - lm87_write_value(client, LM87_REG_TEMP_HIGH[i], 0x7F); - lm87_write_value(client, LM87_REG_TEMP_LOW[i], 0x00); - lm87_write_value(client, LM87_REG_AIN_MIN(i), 0x00); - lm87_write_value(client, LM87_REG_AIN_MAX(i), 0xFF); - } - if (data->channel & CHAN_TEMP3) { - lm87_write_value(client, LM87_REG_TEMP_HIGH[2], 0x7F); - lm87_write_value(client, LM87_REG_TEMP_LOW[2], 0x00); - } else { - lm87_write_value(client, LM87_REG_IN_MIN(0), 0x00); - lm87_write_value(client, LM87_REG_IN_MAX(0), 0xFF); - } - } - if ((config & 0x81) != 0x01) { - /* Start monitoring */ - lm87_write_value(client, LM87_REG_CONFIG, - (config & 0xF7) | 0x01); - } -} - -static int lm87_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static struct lm87_data *lm87_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm87_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - int i, j; - - dev_dbg(&client->dev, "Updating data.\n"); - - i = (data->channel & CHAN_TEMP3) ? 1 : 0; - j = (data->channel & CHAN_TEMP3) ? 5 : 6; - for (; i < j; i++) { - data->in[i] = lm87_read_value(client, - LM87_REG_IN(i)); - data->in_min[i] = lm87_read_value(client, - LM87_REG_IN_MIN(i)); - data->in_max[i] = lm87_read_value(client, - LM87_REG_IN_MAX(i)); - } - - for (i = 0; i < 2; i++) { - if (data->channel & CHAN_NO_FAN(i)) { - data->in[6+i] = lm87_read_value(client, - LM87_REG_AIN(i)); - data->in_max[6+i] = lm87_read_value(client, - LM87_REG_AIN_MAX(i)); - data->in_min[6+i] = lm87_read_value(client, - LM87_REG_AIN_MIN(i)); - - } else { - data->fan[i] = lm87_read_value(client, - LM87_REG_FAN(i)); - data->fan_min[i] = lm87_read_value(client, - LM87_REG_FAN_MIN(i)); - } - } - - j = (data->channel & CHAN_TEMP3) ? 3 : 2; - for (i = 0 ; i < j; i++) { - data->temp[i] = lm87_read_value(client, - LM87_REG_TEMP[i]); - data->temp_high[i] = lm87_read_value(client, - LM87_REG_TEMP_HIGH[i]); - data->temp_low[i] = lm87_read_value(client, - LM87_REG_TEMP_LOW[i]); - } - - i = lm87_read_value(client, LM87_REG_TEMP_HW_INT_LOCK); - j = lm87_read_value(client, LM87_REG_TEMP_HW_INT); - data->temp_crit_int = min(i, j); - - i = lm87_read_value(client, LM87_REG_TEMP_HW_EXT_LOCK); - j = lm87_read_value(client, LM87_REG_TEMP_HW_EXT); - data->temp_crit_ext = min(i, j); - - i = lm87_read_value(client, LM87_REG_VID_FAN_DIV); - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = (i >> 6) & 0x03; - data->vid = (i & 0x0F) - | (lm87_read_value(client, LM87_REG_VID4) & 0x01) - << 4; - - data->alarms = lm87_read_value(client, LM87_REG_ALARMS1) - | (lm87_read_value(client, LM87_REG_ALARMS2) - << 8); - data->aout = lm87_read_value(client, LM87_REG_AOUT); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm87_init(void) -{ - return i2c_add_driver(&lm87_driver); -} - -static void __exit sensors_lm87_exit(void) -{ - i2c_del_driver(&lm87_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org> and others"); -MODULE_DESCRIPTION("LM87 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm87_init); -module_exit(sensors_lm87_exit); diff --git a/drivers/i2c/chips/lm90.c b/drivers/i2c/chips/lm90.c deleted file mode 100644 index a67dcadf7cb0..000000000000 --- a/drivers/i2c/chips/lm90.c +++ /dev/null @@ -1,655 +0,0 @@ -/* - * lm90.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003-2005 Jean Delvare <khali@linux-fr.org> - * - * Based on the lm83 driver. The LM90 is a sensor chip made by National - * Semiconductor. It reports up to two temperatures (its own plus up to - * one external one) with a 0.125 deg resolution (1 deg for local - * temperature) and a 3-4 deg accuracy. Complete datasheet can be - * obtained from National's website at: - * http://www.national.com/pf/LM/LM90.html - * - * This driver also supports the LM89 and LM99, two other sensor chips - * made by National Semiconductor. Both have an increased remote - * temperature measurement accuracy (1 degree), and the LM99 - * additionally shifts remote temperatures (measured and limits) by 16 - * degrees, which allows for higher temperatures measurement. The - * driver doesn't handle it since it can be done easily in user-space. - * Complete datasheets can be obtained from National's website at: - * http://www.national.com/pf/LM/LM89.html - * http://www.national.com/pf/LM/LM99.html - * Note that there is no way to differentiate between both chips. - * - * This driver also supports the LM86, another sensor chip made by - * National Semiconductor. It is exactly similar to the LM90 except it - * has a higher accuracy. - * Complete datasheet can be obtained from National's website at: - * http://www.national.com/pf/LM/LM86.html - * - * This driver also supports the ADM1032, a sensor chip made by Analog - * Devices. That chip is similar to the LM90, with a few differences - * that are not handled by this driver. Complete datasheet can be - * obtained from Analog's website at: - * http://products.analog.com/products/info.asp?product=ADM1032 - * Among others, it has a higher accuracy than the LM90, much like the - * LM86 does. - * - * This driver also supports the MAX6657, MAX6658 and MAX6659 sensor - * chips made by Maxim. These chips are similar to the LM86. Complete - * datasheet can be obtained at Maxim's website at: - * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 - * Note that there is no easy way to differentiate between the three - * variants. The extra address and features of the MAX6659 are not - * supported by this driver. - * - * This driver also supports the ADT7461 chip from Analog Devices but - * only in its "compatability mode". If an ADT7461 chip is found but - * is configured in non-compatible mode (where its temperature - * register values are decoded differently) it is ignored by this - * driver. Complete datasheet can be obtained from Analog's website - * at: - * http://products.analog.com/products/info.asp?product=ADT7461 - * - * Since the LM90 was the first chipset supported by this driver, most - * comments will refer to this chipset, but are actually general and - * concern all supported chipsets, unless mentioned otherwise. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/hwmon-sysfs.h> - -/* - * Addresses to scan - * Address is fully defined internally and cannot be changed except for - * MAX6659. - * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c. - * LM89-1, and LM99-1 have address 0x4d. - * MAX6659 can have address 0x4c, 0x4d or 0x4e (unsupported). - * ADT7461 always has address 0x4c. - */ - -static unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_6(lm90, adm1032, lm99, lm86, max6657, adt7461); - -/* - * The LM90 registers - */ - -#define LM90_REG_R_MAN_ID 0xFE -#define LM90_REG_R_CHIP_ID 0xFF -#define LM90_REG_R_CONFIG1 0x03 -#define LM90_REG_W_CONFIG1 0x09 -#define LM90_REG_R_CONFIG2 0xBF -#define LM90_REG_W_CONFIG2 0xBF -#define LM90_REG_R_CONVRATE 0x04 -#define LM90_REG_W_CONVRATE 0x0A -#define LM90_REG_R_STATUS 0x02 -#define LM90_REG_R_LOCAL_TEMP 0x00 -#define LM90_REG_R_LOCAL_HIGH 0x05 -#define LM90_REG_W_LOCAL_HIGH 0x0B -#define LM90_REG_R_LOCAL_LOW 0x06 -#define LM90_REG_W_LOCAL_LOW 0x0C -#define LM90_REG_R_LOCAL_CRIT 0x20 -#define LM90_REG_W_LOCAL_CRIT 0x20 -#define LM90_REG_R_REMOTE_TEMPH 0x01 -#define LM90_REG_R_REMOTE_TEMPL 0x10 -#define LM90_REG_R_REMOTE_OFFSH 0x11 -#define LM90_REG_W_REMOTE_OFFSH 0x11 -#define LM90_REG_R_REMOTE_OFFSL 0x12 -#define LM90_REG_W_REMOTE_OFFSL 0x12 -#define LM90_REG_R_REMOTE_HIGHH 0x07 -#define LM90_REG_W_REMOTE_HIGHH 0x0D -#define LM90_REG_R_REMOTE_HIGHL 0x13 -#define LM90_REG_W_REMOTE_HIGHL 0x13 -#define LM90_REG_R_REMOTE_LOWH 0x08 -#define LM90_REG_W_REMOTE_LOWH 0x0E -#define LM90_REG_R_REMOTE_LOWL 0x14 -#define LM90_REG_W_REMOTE_LOWL 0x14 -#define LM90_REG_R_REMOTE_CRIT 0x19 -#define LM90_REG_W_REMOTE_CRIT 0x19 -#define LM90_REG_R_TCRIT_HYST 0x21 -#define LM90_REG_W_TCRIT_HYST 0x21 - -/* - * Conversions and various macros - * For local temperatures and limits, critical limits and the hysteresis - * value, the LM90 uses signed 8-bit values with LSB = 1 degree Celsius. - * For remote temperatures and limits, it uses signed 11-bit values with - * LSB = 0.125 degree Celsius, left-justified in 16-bit registers. - */ - -#define TEMP1_FROM_REG(val) ((val) * 1000) -#define TEMP1_TO_REG(val) ((val) <= -128000 ? -128 : \ - (val) >= 127000 ? 127 : \ - (val) < 0 ? ((val) - 500) / 1000 : \ - ((val) + 500) / 1000) -#define TEMP2_FROM_REG(val) ((val) / 32 * 125) -#define TEMP2_TO_REG(val) ((val) <= -128000 ? 0x8000 : \ - (val) >= 127875 ? 0x7FE0 : \ - (val) < 0 ? ((val) - 62) / 125 * 32 : \ - ((val) + 62) / 125 * 32) -#define HYST_TO_REG(val) ((val) <= 0 ? 0 : (val) >= 30500 ? 31 : \ - ((val) + 500) / 1000) - -/* - * ADT7461 is almost identical to LM90 except that attempts to write - * values that are outside the range 0 < temp < 127 are treated as - * the boundary value. - */ - -#define TEMP1_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \ - (val) >= 127000 ? 127 : \ - ((val) + 500) / 1000) -#define TEMP2_TO_REG_ADT7461(val) ((val) <= 0 ? 0 : \ - (val) >= 127750 ? 0x7FC0 : \ - ((val) + 125) / 250 * 64) - -/* - * Functions declaration - */ - -static int lm90_attach_adapter(struct i2c_adapter *adapter); -static int lm90_detect(struct i2c_adapter *adapter, int address, - int kind); -static void lm90_init_client(struct i2c_client *client); -static int lm90_detach_client(struct i2c_client *client); -static struct lm90_data *lm90_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver lm90_driver = { - .owner = THIS_MODULE, - .name = "lm90", - .id = I2C_DRIVERID_LM90, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm90_attach_adapter, - .detach_client = lm90_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct lm90_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - int kind; - - /* registers values */ - s8 temp8[5]; /* 0: local input - 1: local low limit - 2: local high limit - 3: local critical limit - 4: remote critical limit */ - s16 temp11[3]; /* 0: remote input - 1: remote low limit - 2: remote high limit */ - u8 temp_hyst; - u8 alarms; /* bitvector */ -}; - -/* - * Sysfs stuff - */ - -static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index])); -} - -static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - static const u8 reg[4] = { - LM90_REG_W_LOCAL_LOW, - LM90_REG_W_LOCAL_HIGH, - LM90_REG_W_LOCAL_CRIT, - LM90_REG_W_REMOTE_CRIT, - }; - - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - int nr = attr->index; - - down(&data->update_lock); - if (data->kind == adt7461) - data->temp8[nr] = TEMP1_TO_REG_ADT7461(val); - else - data->temp8[nr] = TEMP1_TO_REG(val); - i2c_smbus_write_byte_data(client, reg[nr - 1], data->temp8[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", TEMP2_FROM_REG(data->temp11[attr->index])); -} - -static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, - const char *buf, size_t count) -{ - static const u8 reg[4] = { - LM90_REG_W_REMOTE_LOWH, - LM90_REG_W_REMOTE_LOWL, - LM90_REG_W_REMOTE_HIGHH, - LM90_REG_W_REMOTE_HIGHL, - }; - - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - int nr = attr->index; - - down(&data->update_lock); - if (data->kind == adt7461) - data->temp11[nr] = TEMP2_TO_REG_ADT7461(val); - else - data->temp11[nr] = TEMP2_TO_REG(val); - i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], - data->temp11[nr] >> 8); - i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], - data->temp11[nr] & 0xff); - up(&data->update_lock); - return count; -} - -static ssize_t show_temphyst(struct device *dev, struct device_attribute *devattr, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp8[attr->index]) - - TEMP1_FROM_REG(data->temp_hyst)); -} - -static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - long hyst; - - down(&data->update_lock); - hyst = TEMP1_FROM_REG(data->temp8[3]) - val; - i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST, - HYST_TO_REG(hyst)); - up(&data->update_lock); - return count; -} - -static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, - char *buf) -{ - struct lm90_data *data = lm90_update_device(dev); - return sprintf(buf, "%d\n", data->alarms); -} - -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp8, NULL, 0); -static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); -static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 1); -static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 1); -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 2); -static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, - set_temp11, 2); -static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 3); -static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp8, - set_temp8, 4); -static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temphyst, - set_temphyst, 3); -static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temphyst, NULL, 4); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* - * Real code - */ - -static int lm90_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm90_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm90_data *data; - int err = 0; - const char *name = ""; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct lm90_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm90_data)); - - /* The common I2C client data is placed right before the - LM90-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm90_driver; - new_client->flags = 0; - - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - - /* Default to an LM90 if forced */ - if (kind == 0) - kind = lm90; - - if (kind < 0) { /* detection and identification */ - u8 man_id, chip_id, reg_config1, reg_convrate; - - man_id = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CHIP_ID); - reg_config1 = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONFIG1); - reg_convrate = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONVRATE); - - if (man_id == 0x01) { /* National Semiconductor */ - u8 reg_config2; - - reg_config2 = i2c_smbus_read_byte_data(new_client, - LM90_REG_R_CONFIG2); - - if ((reg_config1 & 0x2A) == 0x00 - && (reg_config2 & 0xF8) == 0x00 - && reg_convrate <= 0x09) { - if (address == 0x4C - && (chip_id & 0xF0) == 0x20) { /* LM90 */ - kind = lm90; - } else - if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */ - kind = lm99; - } else - if (address == 0x4C - && (chip_id & 0xF0) == 0x10) { /* LM86 */ - kind = lm86; - } - } - } else - if (man_id == 0x41) { /* Analog Devices */ - if (address == 0x4C - && (chip_id & 0xF0) == 0x40 /* ADM1032 */ - && (reg_config1 & 0x3F) == 0x00 - && reg_convrate <= 0x0A) { - kind = adm1032; - } else - if (address == 0x4c - && chip_id == 0x51 /* ADT7461 */ - && (reg_config1 & 0x1F) == 0x00 /* check compat mode */ - && reg_convrate <= 0x0A) { - kind = adt7461; - } - } else - if (man_id == 0x4D) { /* Maxim */ - /* - * The Maxim variants do NOT have a chip_id register. - * Reading from that address will return the last read - * value, which in our case is those of the man_id - * register. Likewise, the config1 register seems to - * lack a low nibble, so the value will be those of the - * previous read, so in our case those of the man_id - * register. - */ - if (chip_id == man_id - && (reg_config1 & 0x1F) == (man_id & 0x0F) - && reg_convrate <= 0x09) { - kind = max6657; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; - } - } - - if (kind == lm90) { - name = "lm90"; - } else if (kind == adm1032) { - name = "adm1032"; - } else if (kind == lm99) { - name = "lm99"; - } else if (kind == lm86) { - name = "lm86"; - } else if (kind == max6657) { - name = "max6657"; - } else if (kind == adt7461) { - name = "adt7461"; - } - - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - data->kind = kind; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the LM90 chip */ - lm90_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_input.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_min.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_max.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp1_crit_hyst.dev_attr); - device_create_file(&new_client->dev, - &sensor_dev_attr_temp2_crit_hyst.dev_attr); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static void lm90_init_client(struct i2c_client *client) -{ - u8 config; - - /* - * Start the conversions. - */ - i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, - 5); /* 2 Hz */ - config = i2c_smbus_read_byte_data(client, LM90_REG_R_CONFIG1); - if (config & 0x40) - i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, - config & 0xBF); /* run */ -} - -static int lm90_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static struct lm90_data *lm90_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm90_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - u8 oldh, newh; - - dev_dbg(&client->dev, "Updating lm90 data.\n"); - data->temp8[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_TEMP); - data->temp8[1] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_LOW); - data->temp8[2] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_HIGH); - data->temp8[3] = i2c_smbus_read_byte_data(client, - LM90_REG_R_LOCAL_CRIT); - data->temp8[4] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_CRIT); - data->temp_hyst = i2c_smbus_read_byte_data(client, - LM90_REG_R_TCRIT_HYST); - - /* - * There is a trick here. We have to read two registers to - * have the remote sensor temperature, but we have to beware - * a conversion could occur inbetween the readings. The - * datasheet says we should either use the one-shot - * conversion register, which we don't want to do (disables - * hardware monitoring) or monitor the busy bit, which is - * impossible (we can't read the values and monitor that bit - * at the exact same time). So the solution used here is to - * read the high byte once, then the low byte, then the high - * byte again. If the new high byte matches the old one, - * then we have a valid reading. Else we have to read the low - * byte again, and now we believe we have a correct reading. - */ - oldh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); - newh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - if (newh != oldh) { - data->temp11[0] = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPL); -#ifdef DEBUG - oldh = i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_TEMPH); - /* oldh is actually newer */ - if (newh != oldh) - dev_warn(&client->dev, "Remote temperature may be " - "wrong.\n"); -#endif - } - data->temp11[0] |= (newh << 8); - - data->temp11[1] = (i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWH) << 8) + - i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_LOWL); - data->temp11[2] = (i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_HIGHH) << 8) + - i2c_smbus_read_byte_data(client, - LM90_REG_R_REMOTE_HIGHL); - data->alarms = i2c_smbus_read_byte_data(client, - LM90_REG_R_STATUS); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm90_init(void) -{ - return i2c_add_driver(&lm90_driver); -} - -static void __exit sensors_lm90_exit(void) -{ - i2c_del_driver(&lm90_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("LM90/ADM1032 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm90_init); -module_exit(sensors_lm90_exit); diff --git a/drivers/i2c/chips/lm92.c b/drivers/i2c/chips/lm92.c deleted file mode 100644 index 215c8e40ffdd..000000000000 --- a/drivers/i2c/chips/lm92.c +++ /dev/null @@ -1,429 +0,0 @@ -/* - * lm92 - Hardware monitoring driver - * Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> - * - * Based on the lm90 driver, with some ideas taken from the lm_sensors - * lm92 driver as well. - * - * The LM92 is a sensor chip made by National Semiconductor. It reports - * its own temperature with a 0.0625 deg resolution and a 0.33 deg - * accuracy. Complete datasheet can be obtained from National's website - * at: - * http://www.national.com/pf/LM/LM92.html - * - * This driver also supports the MAX6635 sensor chip made by Maxim. - * This chip is compatible with the LM92, but has a lesser accuracy - * (1.0 deg). Complete datasheet can be obtained from Maxim's website - * at: - * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 - * - * Since the LM92 was the first chipset supported by this driver, most - * comments will refer to this chipset, but are actually general and - * concern all supported chipsets, unless mentioned otherwise. - * - * Support could easily be added for the National Semiconductor LM76 - * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible - * with the LM92. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - - -/* The LM92 and MAX6635 have 2 two-state pins for address selection, - resulting in 4 possible addresses. */ -static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, - I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(lm92); - -/* The LM92 registers */ -#define LM92_REG_CONFIG 0x01 /* 8-bit, RW */ -#define LM92_REG_TEMP 0x00 /* 16-bit, RO */ -#define LM92_REG_TEMP_HYST 0x02 /* 16-bit, RW */ -#define LM92_REG_TEMP_CRIT 0x03 /* 16-bit, RW */ -#define LM92_REG_TEMP_LOW 0x04 /* 16-bit, RW */ -#define LM92_REG_TEMP_HIGH 0x05 /* 16-bit, RW */ -#define LM92_REG_MAN_ID 0x07 /* 16-bit, RO, LM92 only */ - -/* The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius, - left-justified in 16-bit registers. No rounding is done, with such - a resolution it's just not worth it. Note that the MAX6635 doesn't - make use of the 4 lower bits for limits (i.e. effective resolution - for limits is 1 degree Celsius). */ -static inline int TEMP_FROM_REG(s16 reg) -{ - return reg / 8 * 625 / 10; -} - -static inline s16 TEMP_TO_REG(int val) -{ - if (val <= -60000) - return -60000 * 10 / 625 * 8; - if (val >= 160000) - return 160000 * 10 / 625 * 8; - return val * 10 / 625 * 8; -} - -/* Alarm flags are stored in the 3 LSB of the temperature register */ -static inline u8 ALARMS_FROM_REG(s16 reg) -{ - return reg & 0x0007; -} - -/* Driver data (common to all clients) */ -static struct i2c_driver lm92_driver; - -/* Client data (each client gets its own) */ -struct lm92_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - s16 temp1_input, temp1_crit, temp1_min, temp1_max, temp1_hyst; -}; - - -/* - * Sysfs attributes and callback functions - */ - -static struct lm92_data *lm92_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm92_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) - || !data->valid) { - dev_dbg(&client->dev, "Updating lm92 data\n"); - data->temp1_input = swab16(i2c_smbus_read_word_data(client, - LM92_REG_TEMP)); - data->temp1_hyst = swab16(i2c_smbus_read_word_data(client, - LM92_REG_TEMP_HYST)); - data->temp1_crit = swab16(i2c_smbus_read_word_data(client, - LM92_REG_TEMP_CRIT)); - data->temp1_min = swab16(i2c_smbus_read_word_data(client, - LM92_REG_TEMP_LOW)); - data->temp1_max = swab16(i2c_smbus_read_word_data(client, - LM92_REG_TEMP_HIGH)); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -#define show_temp(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm92_data *data = lm92_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ -} -show_temp(temp1_input); -show_temp(temp1_crit); -show_temp(temp1_min); -show_temp(temp1_max); - -#define set_temp(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm92_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(val); \ - i2c_smbus_write_word_data(client, reg, swab16(data->value)); \ - up(&data->update_lock); \ - return count; \ -} -set_temp(temp1_crit, LM92_REG_TEMP_CRIT); -set_temp(temp1_min, LM92_REG_TEMP_LOW); -set_temp(temp1_max, LM92_REG_TEMP_HIGH); - -static ssize_t show_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm92_data *data = lm92_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_crit) - - TEMP_FROM_REG(data->temp1_hyst)); -} -static ssize_t show_temp1_max_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm92_data *data = lm92_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_max) - - TEMP_FROM_REG(data->temp1_hyst)); -} -static ssize_t show_temp1_min_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm92_data *data = lm92_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp1_min) - + TEMP_FROM_REG(data->temp1_hyst)); -} - -static ssize_t set_temp1_crit_hyst(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm92_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val; - i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST, - swab16(TEMP_TO_REG(data->temp1_hyst))); - up(&data->update_lock); - return count; -} - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm92_data *data = lm92_update_device(dev); - return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input)); -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL); -static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp1_crit, - set_temp1_crit); -static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp1_crit_hyst, - set_temp1_crit_hyst); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp1_min, - set_temp1_min); -static DEVICE_ATTR(temp1_min_hyst, S_IRUGO, show_temp1_min_hyst, NULL); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_max, - set_temp1_max); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp1_max_hyst, NULL); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - - -/* - * Detection and registration - */ - -static void lm92_init_client(struct i2c_client *client) -{ - u8 config; - - /* Start the conversions if needed */ - config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); - if (config & 0x01) - i2c_smbus_write_byte_data(client, LM92_REG_CONFIG, - config & 0xFE); -} - -/* The MAX6635 has no identification register, so we have to use tricks - to identify it reliably. This is somewhat slow. - Note that we do NOT rely on the 2 MSB of the configuration register - always reading 0, as suggested by the datasheet, because it was once - reported not to be true. */ -static int max6635_check(struct i2c_client *client) -{ - u16 temp_low, temp_high, temp_hyst, temp_crit; - u8 conf; - int i; - - /* No manufacturer ID register, so a read from this address will - always return the last read value. */ - temp_low = i2c_smbus_read_word_data(client, LM92_REG_TEMP_LOW); - if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_low) - return 0; - temp_high = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HIGH); - if (i2c_smbus_read_word_data(client, LM92_REG_MAN_ID) != temp_high) - return 0; - - /* Limits are stored as integer values (signed, 9-bit). */ - if ((temp_low & 0x7f00) || (temp_high & 0x7f00)) - return 0; - temp_hyst = i2c_smbus_read_word_data(client, LM92_REG_TEMP_HYST); - temp_crit = i2c_smbus_read_word_data(client, LM92_REG_TEMP_CRIT); - if ((temp_hyst & 0x7f00) || (temp_crit & 0x7f00)) - return 0; - - /* Registers addresses were found to cycle over 16-byte boundaries. - We don't test all registers with all offsets so as to save some - reads and time, but this should still be sufficient to dismiss - non-MAX6635 chips. */ - conf = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); - for (i=16; i<96; i*=2) { - if (temp_hyst != i2c_smbus_read_word_data(client, - LM92_REG_TEMP_HYST + i - 16) - || temp_crit != i2c_smbus_read_word_data(client, - LM92_REG_TEMP_CRIT + i) - || temp_low != i2c_smbus_read_word_data(client, - LM92_REG_TEMP_LOW + i + 16) - || temp_high != i2c_smbus_read_word_data(client, - LM92_REG_TEMP_HIGH + i + 32) - || conf != i2c_smbus_read_byte_data(client, - LM92_REG_CONFIG + i)) - return 0; - } - - return 1; -} - -/* The following function does more than just detection. If detection - succeeds, it also registers the new chip. */ -static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm92_data *data; - int err = 0; - char *name; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA - | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct lm92_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm92_data)); - - /* Fill in enough client fields so that we can read from the chip, - which is required for identication */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm92_driver; - new_client->flags = 0; - - /* A negative kind means that the driver was loaded with no force - parameter (default), so we must identify the chip. */ - if (kind < 0) { - u8 config = i2c_smbus_read_byte_data(new_client, - LM92_REG_CONFIG); - u16 man_id = i2c_smbus_read_word_data(new_client, - LM92_REG_MAN_ID); - - if ((config & 0xe0) == 0x00 - && man_id == 0x0180) { - pr_info("lm92: Found National Semiconductor LM92 chip\n"); - kind = lm92; - } else - if (max6635_check(new_client)) { - pr_info("lm92: Found Maxim MAX6635 chip\n"); - kind = lm92; /* No separate prefix */ - } - else - goto exit_free; - } else - if (kind == 0) /* Default to an LM92 if forced */ - kind = lm92; - - /* Give it the proper name */ - if (kind == lm92) { - name = "lm92"; - } else { /* Supposedly cannot happen */ - dev_dbg(&new_client->dev, "Kind out of range?\n"); - goto exit_free; - } - - /* Fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the i2c subsystem a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the chipset */ - lm92_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_min_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int lm92_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm92_detect); -} - -static int lm92_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - - -/* - * Module and driver stuff - */ - -static struct i2c_driver lm92_driver = { - .owner = THIS_MODULE, - .name = "lm92", - .id = I2C_DRIVERID_LM92, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm92_attach_adapter, - .detach_client = lm92_detach_client, -}; - -static int __init sensors_lm92_init(void) -{ - return i2c_add_driver(&lm92_driver); -} - -static void __exit sensors_lm92_exit(void) -{ - i2c_del_driver(&lm92_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("LM92/MAX6635 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm92_init); -module_exit(sensors_lm92_exit); diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c index 5e463c47bfbc..778d7e12859d 100644 --- a/drivers/i2c/chips/m41t00.c +++ b/drivers/i2c/chips/m41t00.c @@ -207,7 +207,7 @@ m41t00_detach(struct i2c_client *client) int rc; if ((rc = i2c_detach_client(client)) == 0) { - kfree(i2c_get_clientdata(client)); + kfree(client); tasklet_kill(&m41t00_tasklet); } return rc; diff --git a/drivers/i2c/chips/max1619.c b/drivers/i2c/chips/max1619.c deleted file mode 100644 index bf553dcd97d6..000000000000 --- a/drivers/i2c/chips/max1619.c +++ /dev/null @@ -1,372 +0,0 @@ -/* - * max1619.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru> - * Jean Delvare <khali@linux-fr.org> - * - * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. - * It reports up to two temperatures (its own plus up to - * one external one). Complete datasheet can be - * obtained from Maxim's website at: - * http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - - -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(max1619); - -/* - * The MAX1619 registers - */ - -#define MAX1619_REG_R_MAN_ID 0xFE -#define MAX1619_REG_R_CHIP_ID 0xFF -#define MAX1619_REG_R_CONFIG 0x03 -#define MAX1619_REG_W_CONFIG 0x09 -#define MAX1619_REG_R_CONVRATE 0x04 -#define MAX1619_REG_W_CONVRATE 0x0A -#define MAX1619_REG_R_STATUS 0x02 -#define MAX1619_REG_R_LOCAL_TEMP 0x00 -#define MAX1619_REG_R_REMOTE_TEMP 0x01 -#define MAX1619_REG_R_REMOTE_HIGH 0x07 -#define MAX1619_REG_W_REMOTE_HIGH 0x0D -#define MAX1619_REG_R_REMOTE_LOW 0x08 -#define MAX1619_REG_W_REMOTE_LOW 0x0E -#define MAX1619_REG_R_REMOTE_CRIT 0x10 -#define MAX1619_REG_W_REMOTE_CRIT 0x12 -#define MAX1619_REG_R_TCRIT_HYST 0x11 -#define MAX1619_REG_W_TCRIT_HYST 0x13 - -/* - * Conversions and various macros - */ - -#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) -#define TEMP_TO_REG(val) ((val < 0 ? val+0x100*1000 : val) / 1000) - -/* - * Functions declaration - */ - -static int max1619_attach_adapter(struct i2c_adapter *adapter); -static int max1619_detect(struct i2c_adapter *adapter, int address, - int kind); -static void max1619_init_client(struct i2c_client *client); -static int max1619_detach_client(struct i2c_client *client); -static struct max1619_data *max1619_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver max1619_driver = { - .owner = THIS_MODULE, - .name = "max1619", - .flags = I2C_DF_NOTIFY, - .attach_adapter = max1619_attach_adapter, - .detach_client = max1619_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct max1619_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - u8 temp_input1; /* local */ - u8 temp_input2, temp_low2, temp_high2; /* remote */ - u8 temp_crit2; - u8 temp_hyst2; - u8 alarms; -}; - -/* - * Sysfs stuff - */ - -#define show_temp(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct max1619_data *data = max1619_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ -} -show_temp(temp_input1); -show_temp(temp_input2); -show_temp(temp_low2); -show_temp(temp_high2); -show_temp(temp_crit2); -show_temp(temp_hyst2); - -#define set_temp2(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct max1619_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(val); \ - i2c_smbus_write_byte_data(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} - -set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW); -set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH); -set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT); -set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST); - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct max1619_data *data = max1619_update_device(dev); - return sprintf(buf, "%d\n", data->alarms); -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); -static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); -static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, - set_temp_low2); -static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, - set_temp_high2); -static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, - set_temp_crit2); -static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, - set_temp_hyst2); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* - * Real code - */ - -static int max1619_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, max1619_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct max1619_data *data; - int err = 0; - const char *name = ""; - u8 reg_config=0, reg_convrate=0, reg_status=0; - u8 man_id, chip_id; - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct max1619_data)); - - /* The common I2C client data is placed right before the - MAX1619-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &max1619_driver; - new_client->flags = 0; - - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip. A zero kind means that - * the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - if (kind < 0) { /* detection */ - reg_config = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_CONFIG); - reg_convrate = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_CONVRATE); - reg_status = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_STATUS); - if ((reg_config & 0x03) != 0x00 - || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) { - dev_dbg(&adapter->dev, - "MAX1619 detection failed at 0x%02x.\n", - address); - goto exit_free; - } - } - - if (kind <= 0) { /* identification */ - - man_id = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_MAN_ID); - chip_id = i2c_smbus_read_byte_data(new_client, - MAX1619_REG_R_CHIP_ID); - - if ((man_id == 0x4D) && (chip_id == 0x04)){ - kind = max1619; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%02X, " - "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; - } - - - if (kind == max1619){ - name = "max1619"; - } - - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the MAX1619 chip */ - max1619_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static void max1619_init_client(struct i2c_client *client) -{ - u8 config; - - /* - * Start the conversions. - */ - i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, - 5); /* 2 Hz */ - config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); - if (config & 0x40) - i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, - config & 0xBF); /* run */ -} - -static int max1619_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static struct max1619_data *max1619_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct max1619_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - dev_dbg(&client->dev, "Updating max1619 data.\n"); - data->temp_input1 = i2c_smbus_read_byte_data(client, - MAX1619_REG_R_LOCAL_TEMP); - data->temp_input2 = i2c_smbus_read_byte_data(client, - MAX1619_REG_R_REMOTE_TEMP); - data->temp_high2 = i2c_smbus_read_byte_data(client, - MAX1619_REG_R_REMOTE_HIGH); - data->temp_low2 = i2c_smbus_read_byte_data(client, - MAX1619_REG_R_REMOTE_LOW); - data->temp_crit2 = i2c_smbus_read_byte_data(client, - MAX1619_REG_R_REMOTE_CRIT); - data->temp_hyst2 = i2c_smbus_read_byte_data(client, - MAX1619_REG_R_TCRIT_HYST); - data->alarms = i2c_smbus_read_byte_data(client, - MAX1619_REG_R_STATUS); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_max1619_init(void) -{ - return i2c_add_driver(&max1619_driver); -} - -static void __exit sensors_max1619_exit(void) -{ - i2c_del_driver(&max1619_driver); -} - -MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and" - "Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("MAX1619 sensor driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_max1619_init); -module_exit(sensors_max1619_exit); diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index fe6b150ec4c2..c4f14d9623c4 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -37,7 +37,8 @@ #include <linux/i2c-sensor.h> /* Addresses to scan */ -static unsigned short normal_i2c[] = {0x50, 0x52, I2C_CLIENT_END}; +/* No address scanned by default, as this could corrupt standard EEPROMS. */ +static unsigned short normal_i2c[] = {I2C_CLIENT_END}; static unsigned int normal_isa[] = {I2C_CLIENT_ISA_END}; /* Insmod parameters */ @@ -369,6 +370,9 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) new_client->driver = &max6875_driver; new_client->flags = 0; + /* Prevent 24RF08 corruption */ + i2c_smbus_write_quick(new_client, 0); + /* Setup the user section */ data->blocks[max6875_eeprom_user].type = max6875_eeprom_user; data->blocks[max6875_eeprom_user].slices = USER_EEPROM_SLICES; diff --git a/drivers/i2c/chips/pc87360.c b/drivers/i2c/chips/pc87360.c deleted file mode 100644 index 876c68f3af31..000000000000 --- a/drivers/i2c/chips/pc87360.c +++ /dev/null @@ -1,1348 +0,0 @@ -/* - * pc87360.c - Part of lm_sensors, Linux kernel modules - * for hardware monitoring - * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> - * - * Copied from smsc47m1.c: - * Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Supports the following chips: - * - * Chip #vin #fan #pwm #temp devid - * PC87360 - 2 2 - 0xE1 - * PC87363 - 2 2 - 0xE8 - * PC87364 - 3 3 - 0xE4 - * PC87365 11 3 3 2 0xE5 - * PC87366 11 3 3 3-4 0xE9 - * - * This driver assumes that no more than one chip is present, and one of - * the standard Super-I/O addresses is used (0x2E/0x2F or 0x4E/0x4F). - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> -#include <asm/io.h> - -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; -static struct i2c_force_data forces[] = {{ NULL }}; -static u8 devid; -static unsigned int extra_isa[3]; -static u8 confreg[4]; - -enum chips { any_chip, pc87360, pc87363, pc87364, pc87365, pc87366 }; -static struct i2c_address_data addr_data = { - .normal_i2c = normal_i2c, - .normal_isa = normal_isa, - .forces = forces, -}; - -static int init = 1; -module_param(init, int, 0); -MODULE_PARM_DESC(init, - "Chip initialization level:\n" - " 0: None\n" - "*1: Forcibly enable internal voltage and temperature channels, except in9\n" - " 2: Forcibly enable all voltage and temperature channels, except in9\n" - " 3: Forcibly enable all voltage and temperature channels, including in9"); - -/* - * Super-I/O registers and operations - */ - -#define DEV 0x07 /* Register: Logical device select */ -#define DEVID 0x20 /* Register: Device ID */ -#define ACT 0x30 /* Register: Device activation */ -#define BASE 0x60 /* Register: Base address */ - -#define FSCM 0x09 /* Logical device: fans */ -#define VLM 0x0d /* Logical device: voltages */ -#define TMS 0x0e /* Logical device: temperatures */ -static const u8 logdev[3] = { FSCM, VLM, TMS }; - -#define LD_FAN 0 -#define LD_IN 1 -#define LD_TEMP 2 - -static inline void superio_outb(int sioaddr, int reg, int val) -{ - outb(reg, sioaddr); - outb(val, sioaddr+1); -} - -static inline int superio_inb(int sioaddr, int reg) -{ - outb(reg, sioaddr); - return inb(sioaddr+1); -} - -static inline void superio_exit(int sioaddr) -{ - outb(0x02, sioaddr); - outb(0x02, sioaddr+1); -} - -/* - * Logical devices - */ - -#define PC87360_EXTENT 0x10 -#define PC87365_REG_BANK 0x09 -#define NO_BANK 0xff - -/* - * Fan registers and conversions - */ - -/* nr has to be 0 or 1 (PC87360/87363) or 2 (PC87364/87365/87366) */ -#define PC87360_REG_PRESCALE(nr) (0x00 + 2 * (nr)) -#define PC87360_REG_PWM(nr) (0x01 + 2 * (nr)) -#define PC87360_REG_FAN_MIN(nr) (0x06 + 3 * (nr)) -#define PC87360_REG_FAN(nr) (0x07 + 3 * (nr)) -#define PC87360_REG_FAN_STATUS(nr) (0x08 + 3 * (nr)) - -#define FAN_FROM_REG(val,div) ((val) == 0 ? 0: \ - 480000 / ((val)*(div))) -#define FAN_TO_REG(val,div) ((val) <= 100 ? 0 : \ - 480000 / ((val)*(div))) -#define FAN_DIV_FROM_REG(val) (1 << ((val >> 5) & 0x03)) -#define FAN_STATUS_FROM_REG(val) ((val) & 0x07) - -#define FAN_CONFIG_MONITOR(val,nr) (((val) >> (2 + nr * 3)) & 1) -#define FAN_CONFIG_CONTROL(val,nr) (((val) >> (3 + nr * 3)) & 1) -#define FAN_CONFIG_INVERT(val,nr) (((val) >> (4 + nr * 3)) & 1) - -#define PWM_FROM_REG(val,inv) ((inv) ? 255 - (val) : (val)) -static inline u8 PWM_TO_REG(int val, int inv) -{ - if (inv) - val = 255 - val; - if (val < 0) - return 0; - if (val > 255) - return 255; - return val; -} - -/* - * Voltage registers and conversions - */ - -#define PC87365_REG_IN_CONVRATE 0x07 -#define PC87365_REG_IN_CONFIG 0x08 -#define PC87365_REG_IN 0x0B -#define PC87365_REG_IN_MIN 0x0D -#define PC87365_REG_IN_MAX 0x0C -#define PC87365_REG_IN_STATUS 0x0A -#define PC87365_REG_IN_ALARMS1 0x00 -#define PC87365_REG_IN_ALARMS2 0x01 -#define PC87365_REG_VID 0x06 - -#define IN_FROM_REG(val,ref) (((val) * (ref) + 128) / 256) -#define IN_TO_REG(val,ref) ((val) < 0 ? 0 : \ - (val)*256 >= (ref)*255 ? 255: \ - ((val) * 256 + (ref)/2) / (ref)) - -/* - * Temperature registers and conversions - */ - -#define PC87365_REG_TEMP_CONFIG 0x08 -#define PC87365_REG_TEMP 0x0B -#define PC87365_REG_TEMP_MIN 0x0D -#define PC87365_REG_TEMP_MAX 0x0C -#define PC87365_REG_TEMP_CRIT 0x0E -#define PC87365_REG_TEMP_STATUS 0x0A -#define PC87365_REG_TEMP_ALARMS 0x00 - -#define TEMP_FROM_REG(val) ((val) * 1000) -#define TEMP_TO_REG(val) ((val) < -55000 ? -55 : \ - (val) > 127000 ? 127 : \ - (val) < 0 ? ((val) - 500) / 1000 : \ - ((val) + 500) / 1000) - -/* - * Client data (each client gets its own) - */ - -struct pc87360_data { - struct i2c_client client; - struct semaphore lock; - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - int address[3]; - - u8 fannr, innr, tempnr; - - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ - u8 fan_status[3]; /* Register value */ - u8 pwm[3]; /* Register value */ - u16 fan_conf; /* Configuration register values, combined */ - - u16 in_vref; /* 1 mV/bit */ - u8 in[14]; /* Register value */ - u8 in_min[14]; /* Register value */ - u8 in_max[14]; /* Register value */ - u8 in_crit[3]; /* Register value */ - u8 in_status[14]; /* Register value */ - u16 in_alarms; /* Register values, combined, masked */ - u8 vid_conf; /* Configuration register value */ - u8 vrm; - u8 vid; /* Register value */ - - s8 temp[3]; /* Register value */ - s8 temp_min[3]; /* Register value */ - s8 temp_max[3]; /* Register value */ - s8 temp_crit[3]; /* Register value */ - u8 temp_status[3]; /* Register value */ - u8 temp_alarms; /* Register value, masked */ -}; - -/* - * Functions declaration - */ - -static int pc87360_attach_adapter(struct i2c_adapter *adapter); -static int pc87360_detect(struct i2c_adapter *adapter, int address, int kind); -static int pc87360_detach_client(struct i2c_client *client); - -static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, - u8 reg); -static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, - u8 reg, u8 value); -static void pc87360_init_client(struct i2c_client *client, int use_thermistors); -static struct pc87360_data *pc87360_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver pc87360_driver = { - .owner = THIS_MODULE, - .name = "pc87360", - .flags = I2C_DF_NOTIFY, - .attach_adapter = pc87360_attach_adapter, - .detach_client = pc87360_detach_client, -}; - -/* - * Sysfs stuff - */ - -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pc87360_data *data = i2c_get_clientdata(client); - long fan_min = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - fan_min = FAN_TO_REG(fan_min, FAN_DIV_FROM_REG(data->fan_status[nr])); - - /* If it wouldn't fit, change clock divisor */ - while (fan_min > 255 - && (data->fan_status[nr] & 0x60) != 0x60) { - fan_min >>= 1; - data->fan[nr] >>= 1; - data->fan_status[nr] += 0x20; - } - data->fan_min[nr] = fan_min > 255 ? 255 : fan_min; - pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_MIN(nr), - data->fan_min[nr]); - - /* Write new divider, preserve alarm bits */ - pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_FAN_STATUS(nr), - data->fan_status[nr] & 0xF9); - up(&data->update_lock); - - return count; -} - -#define show_and_set_fan(offset) \ -static ssize_t show_fan##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan[offset-1], \ - FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \ -} \ -static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", FAN_FROM_REG(data->fan_min[offset-1], \ - FAN_DIV_FROM_REG(data->fan_status[offset-1]))); \ -} \ -static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", \ - FAN_DIV_FROM_REG(data->fan_status[offset-1])); \ -} \ -static ssize_t show_fan##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", \ - FAN_STATUS_FROM_REG(data->fan_status[offset-1])); \ -} \ -static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset-1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_fan##offset##_input, NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IWUSR | S_IRUGO, \ - show_fan##offset##_min, set_fan##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_fan##offset##_div, NULL); \ -static DEVICE_ATTR(fan##offset##_status, S_IRUGO, \ - show_fan##offset##_status, NULL); -show_and_set_fan(1) -show_and_set_fan(2) -show_and_set_fan(3) - -#define show_and_set_pwm(offset) \ -static ssize_t show_pwm##offset(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", \ - PWM_FROM_REG(data->pwm[offset-1], \ - FAN_CONFIG_INVERT(data->fan_conf, \ - offset-1))); \ -} \ -static ssize_t set_pwm##offset(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->pwm[offset-1] = PWM_TO_REG(val, \ - FAN_CONFIG_INVERT(data->fan_conf, offset-1)); \ - pc87360_write_value(data, LD_FAN, NO_BANK, PC87360_REG_PWM(offset-1), \ - data->pwm[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(pwm##offset, S_IWUSR | S_IRUGO, \ - show_pwm##offset, set_pwm##offset); -show_and_set_pwm(1) -show_and_set_pwm(2) -show_and_set_pwm(3) - -#define show_and_set_in(offset) \ -static ssize_t show_in##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset], \ - data->in_vref)); \ -} \ -static ssize_t show_in##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset], \ - data->in_vref)); \ -} \ -static ssize_t show_in##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset], \ - data->in_vref)); \ -} \ -static ssize_t show_in##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", data->in_status[offset]); \ -} \ -static ssize_t set_in##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_min[offset] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MIN, \ - data->in_min[offset]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_in##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_max[offset] = IN_TO_REG(val, \ - data->in_vref); \ - pc87360_write_value(data, LD_IN, offset, PC87365_REG_IN_MAX, \ - data->in_max[offset]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in##offset##_input, NULL); \ -static DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \ - show_in##offset##_max, set_in##offset##_max); \ -static DEVICE_ATTR(in##offset##_status, S_IRUGO, \ - show_in##offset##_status, NULL); -show_and_set_in(0) -show_and_set_in(1) -show_and_set_in(2) -show_and_set_in(3) -show_and_set_in(4) -show_and_set_in(5) -show_and_set_in(6) -show_and_set_in(7) -show_and_set_in(8) -show_and_set_in(9) -show_and_set_in(10) - -#define show_and_set_therm(offset) \ -static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in[offset+7], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[offset+7], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[offset+7], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", IN_FROM_REG(data->in_crit[offset-4], \ - data->in_vref)); \ -} \ -static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%u\n", data->in_status[offset+7]); \ -} \ -static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_min[offset+7] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MIN, \ - data->in_min[offset+7]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_max[offset+7] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_MAX, \ - data->in_max[offset+7]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_crit[offset-4] = IN_TO_REG(val, data->in_vref); \ - pc87360_write_value(data, LD_IN, offset+7, PC87365_REG_TEMP_CRIT, \ - data->in_crit[offset-4]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp##offset##_input, NULL); \ -static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_temp##offset##_min, set_temp##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_temp##offset##_max, set_temp##offset##_max); \ -static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ - show_temp##offset##_crit, set_temp##offset##_crit); \ -static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ - show_temp##offset##_status, NULL); -show_and_set_therm(4) -show_and_set_therm(5) -show_and_set_therm(6) - -static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pc87360_data *data = pc87360_update_device(dev); - return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); - -static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pc87360_data *data = pc87360_update_device(dev); - return sprintf(buf, "%u\n", data->vrm); -} -static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pc87360_data *data = i2c_get_clientdata(client); - data->vrm = simple_strtoul(buf, NULL, 10); - return count; -} -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); - -static ssize_t show_in_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pc87360_data *data = pc87360_update_device(dev); - return sprintf(buf, "%u\n", data->in_alarms); -} -static DEVICE_ATTR(alarms_in, S_IRUGO, show_in_alarms, NULL); - -#define show_and_set_temp(offset) \ -static ssize_t show_temp##offset##_input(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[offset-1])); \ -} \ -static ssize_t show_temp##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[offset-1])); \ -} \ -static ssize_t show_temp##offset##_max(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[offset-1])); \ -}\ -static ssize_t show_temp##offset##_crit(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[offset-1])); \ -}\ -static ssize_t show_temp##offset##_status(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct pc87360_data *data = pc87360_update_device(dev); \ - return sprintf(buf, "%d\n", data->temp_status[offset-1]); \ -}\ -static ssize_t set_temp##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_min[offset-1] = TEMP_TO_REG(val); \ - pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MIN, \ - data->temp_min[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_max(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_max[offset-1] = TEMP_TO_REG(val); \ - pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_MAX, \ - data->temp_max[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static ssize_t set_temp##offset##_crit(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct pc87360_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp_crit[offset-1] = TEMP_TO_REG(val); \ - pc87360_write_value(data, LD_TEMP, offset-1, PC87365_REG_TEMP_CRIT, \ - data->temp_crit[offset-1]); \ - up(&data->update_lock); \ - return count; \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_temp##offset##_input, NULL); \ -static DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \ - show_temp##offset##_min, set_temp##offset##_min); \ -static DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \ - show_temp##offset##_max, set_temp##offset##_max); \ -static DEVICE_ATTR(temp##offset##_crit, S_IWUSR | S_IRUGO, \ - show_temp##offset##_crit, set_temp##offset##_crit); \ -static DEVICE_ATTR(temp##offset##_status, S_IRUGO, \ - show_temp##offset##_status, NULL); -show_and_set_temp(1) -show_and_set_temp(2) -show_and_set_temp(3) - -static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pc87360_data *data = pc87360_update_device(dev); - return sprintf(buf, "%u\n", data->temp_alarms); -} -static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL); - -/* - * Device detection, registration and update - */ - -static int pc87360_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_detect(adapter, &addr_data, pc87360_detect); -} - -static int pc87360_find(int sioaddr, u8 *devid, int *address) -{ - u16 val; - int i; - int nrdev; /* logical device count */ - - /* No superio_enter */ - - /* Identify device */ - val = superio_inb(sioaddr, DEVID); - switch (val) { - case 0xE1: /* PC87360 */ - case 0xE8: /* PC87363 */ - case 0xE4: /* PC87364 */ - nrdev = 1; - break; - case 0xE5: /* PC87365 */ - case 0xE9: /* PC87366 */ - nrdev = 3; - break; - default: - superio_exit(sioaddr); - return -ENODEV; - } - /* Remember the device id */ - *devid = val; - - for (i = 0; i < nrdev; i++) { - /* select logical device */ - superio_outb(sioaddr, DEV, logdev[i]); - - val = superio_inb(sioaddr, ACT); - if (!(val & 0x01)) { - printk(KERN_INFO "pc87360: Device 0x%02x not " - "activated\n", logdev[i]); - continue; - } - - val = (superio_inb(sioaddr, BASE) << 8) - | superio_inb(sioaddr, BASE + 1); - if (!val) { - printk(KERN_INFO "pc87360: Base address not set for " - "device 0x%02x\n", logdev[i]); - continue; - } - - address[i] = val; - - if (i==0) { /* Fans */ - confreg[0] = superio_inb(sioaddr, 0xF0); - confreg[1] = superio_inb(sioaddr, 0xF1); - -#ifdef DEBUG - printk(KERN_DEBUG "pc87360: Fan 1: mon=%d " - "ctrl=%d inv=%d\n", (confreg[0]>>2)&1, - (confreg[0]>>3)&1, (confreg[0]>>4)&1); - printk(KERN_DEBUG "pc87360: Fan 2: mon=%d " - "ctrl=%d inv=%d\n", (confreg[0]>>5)&1, - (confreg[0]>>6)&1, (confreg[0]>>7)&1); - printk(KERN_DEBUG "pc87360: Fan 3: mon=%d " - "ctrl=%d inv=%d\n", confreg[1]&1, - (confreg[1]>>1)&1, (confreg[1]>>2)&1); -#endif - } else if (i==1) { /* Voltages */ - /* Are we using thermistors? */ - if (*devid == 0xE9) { /* PC87366 */ - /* These registers are not logical-device - specific, just that we won't need them if - we don't use the VLM device */ - confreg[2] = superio_inb(sioaddr, 0x2B); - confreg[3] = superio_inb(sioaddr, 0x25); - - if (confreg[2] & 0x40) { - printk(KERN_INFO "pc87360: Using " - "thermistors for temperature " - "monitoring\n"); - } - if (confreg[3] & 0xE0) { - printk(KERN_INFO "pc87360: VID " - "inputs routed (mode %u)\n", - confreg[3] >> 5); - } - } - } - } - - superio_exit(sioaddr); - return 0; -} - -/* We don't really care about the address. - Read from extra_isa instead. */ -int pc87360_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i; - struct i2c_client *new_client; - struct pc87360_data *data; - int err = 0; - const char *name = "pc87360"; - int use_thermistors = 0; - - if (!i2c_is_isa_adapter(adapter)) - return -ENODEV; - - if (!(data = kmalloc(sizeof(struct pc87360_data), GFP_KERNEL))) - return -ENOMEM; - memset(data, 0x00, sizeof(struct pc87360_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - init_MUTEX(&data->lock); - new_client->adapter = adapter; - new_client->driver = &pc87360_driver; - new_client->flags = 0; - - data->fannr = 2; - data->innr = 0; - data->tempnr = 0; - - switch (devid) { - case 0xe8: - name = "pc87363"; - break; - case 0xe4: - name = "pc87364"; - data->fannr = 3; - break; - case 0xe5: - name = "pc87365"; - data->fannr = extra_isa[0] ? 3 : 0; - data->innr = extra_isa[1] ? 11 : 0; - data->tempnr = extra_isa[2] ? 2 : 0; - break; - case 0xe9: - name = "pc87366"; - data->fannr = extra_isa[0] ? 3 : 0; - data->innr = extra_isa[1] ? 14 : 0; - data->tempnr = extra_isa[2] ? 3 : 0; - break; - } - - strcpy(new_client->name, name); - data->valid = 0; - init_MUTEX(&data->update_lock); - - for (i = 0; i < 3; i++) { - if (((data->address[i] = extra_isa[i])) - && !request_region(extra_isa[i], PC87360_EXTENT, - pc87360_driver.name)) { - dev_err(&new_client->dev, "Region 0x%x-0x%x already " - "in use!\n", extra_isa[i], - extra_isa[i]+PC87360_EXTENT-1); - for (i--; i >= 0; i--) - release_region(extra_isa[i], PC87360_EXTENT); - err = -EBUSY; - goto ERROR1; - } - } - - /* Retrieve the fans configuration from Super-I/O space */ - if (data->fannr) - data->fan_conf = confreg[0] | (confreg[1] << 8); - - if ((err = i2c_attach_client(new_client))) - goto ERROR2; - - /* Use the correct reference voltage - Unless both the VLM and the TMS logical devices agree to - use an external Vref, the internal one is used. */ - if (data->innr) { - i = pc87360_read_value(data, LD_IN, NO_BANK, - PC87365_REG_IN_CONFIG); - if (data->tempnr) { - i &= pc87360_read_value(data, LD_TEMP, NO_BANK, - PC87365_REG_TEMP_CONFIG); - } - data->in_vref = (i&0x02) ? 3025 : 2966; - dev_dbg(&new_client->dev, "Using %s reference voltage\n", - (i&0x02) ? "external" : "internal"); - - data->vid_conf = confreg[3]; - data->vrm = 90; - } - - /* Fan clock dividers may be needed before any data is read */ - for (i = 0; i < data->fannr; i++) { - if (FAN_CONFIG_MONITOR(data->fan_conf, i)) - data->fan_status[i] = pc87360_read_value(data, - LD_FAN, NO_BANK, - PC87360_REG_FAN_STATUS(i)); - } - - if (init > 0) { - if (devid == 0xe9 && data->address[1]) /* PC87366 */ - use_thermistors = confreg[2] & 0x40; - - pc87360_init_client(new_client, use_thermistors); - } - - /* Register sysfs hooks */ - if (data->innr) { - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_in7_input); - device_create_file(&new_client->dev, &dev_attr_in8_input); - device_create_file(&new_client->dev, &dev_attr_in9_input); - device_create_file(&new_client->dev, &dev_attr_in10_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in7_min); - device_create_file(&new_client->dev, &dev_attr_in8_min); - device_create_file(&new_client->dev, &dev_attr_in9_min); - device_create_file(&new_client->dev, &dev_attr_in10_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_in7_max); - device_create_file(&new_client->dev, &dev_attr_in8_max); - device_create_file(&new_client->dev, &dev_attr_in9_max); - device_create_file(&new_client->dev, &dev_attr_in10_max); - device_create_file(&new_client->dev, &dev_attr_in0_status); - device_create_file(&new_client->dev, &dev_attr_in1_status); - device_create_file(&new_client->dev, &dev_attr_in2_status); - device_create_file(&new_client->dev, &dev_attr_in3_status); - device_create_file(&new_client->dev, &dev_attr_in4_status); - device_create_file(&new_client->dev, &dev_attr_in5_status); - device_create_file(&new_client->dev, &dev_attr_in6_status); - device_create_file(&new_client->dev, &dev_attr_in7_status); - device_create_file(&new_client->dev, &dev_attr_in8_status); - device_create_file(&new_client->dev, &dev_attr_in9_status); - device_create_file(&new_client->dev, &dev_attr_in10_status); - - device_create_file(&new_client->dev, &dev_attr_cpu0_vid); - device_create_file(&new_client->dev, &dev_attr_vrm); - device_create_file(&new_client->dev, &dev_attr_alarms_in); - } - - if (data->tempnr) { - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp2_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_status); - device_create_file(&new_client->dev, &dev_attr_temp2_status); - - device_create_file(&new_client->dev, &dev_attr_alarms_temp); - } - if (data->tempnr == 3) { - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp3_min); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp3_crit); - device_create_file(&new_client->dev, &dev_attr_temp3_status); - } - if (data->innr == 14) { - device_create_file(&new_client->dev, &dev_attr_temp4_input); - device_create_file(&new_client->dev, &dev_attr_temp5_input); - device_create_file(&new_client->dev, &dev_attr_temp6_input); - device_create_file(&new_client->dev, &dev_attr_temp4_min); - device_create_file(&new_client->dev, &dev_attr_temp5_min); - device_create_file(&new_client->dev, &dev_attr_temp6_min); - device_create_file(&new_client->dev, &dev_attr_temp4_max); - device_create_file(&new_client->dev, &dev_attr_temp5_max); - device_create_file(&new_client->dev, &dev_attr_temp6_max); - device_create_file(&new_client->dev, &dev_attr_temp4_crit); - device_create_file(&new_client->dev, &dev_attr_temp5_crit); - device_create_file(&new_client->dev, &dev_attr_temp6_crit); - device_create_file(&new_client->dev, &dev_attr_temp4_status); - device_create_file(&new_client->dev, &dev_attr_temp5_status); - device_create_file(&new_client->dev, &dev_attr_temp6_status); - } - - if (data->fannr) { - if (FAN_CONFIG_MONITOR(data->fan_conf, 0)) { - device_create_file(&new_client->dev, - &dev_attr_fan1_input); - device_create_file(&new_client->dev, - &dev_attr_fan1_min); - device_create_file(&new_client->dev, - &dev_attr_fan1_div); - device_create_file(&new_client->dev, - &dev_attr_fan1_status); - } - - if (FAN_CONFIG_MONITOR(data->fan_conf, 1)) { - device_create_file(&new_client->dev, - &dev_attr_fan2_input); - device_create_file(&new_client->dev, - &dev_attr_fan2_min); - device_create_file(&new_client->dev, - &dev_attr_fan2_div); - device_create_file(&new_client->dev, - &dev_attr_fan2_status); - } - - if (FAN_CONFIG_CONTROL(data->fan_conf, 0)) - device_create_file(&new_client->dev, &dev_attr_pwm1); - if (FAN_CONFIG_CONTROL(data->fan_conf, 1)) - device_create_file(&new_client->dev, &dev_attr_pwm2); - } - if (data->fannr == 3) { - if (FAN_CONFIG_MONITOR(data->fan_conf, 2)) { - device_create_file(&new_client->dev, - &dev_attr_fan3_input); - device_create_file(&new_client->dev, - &dev_attr_fan3_min); - device_create_file(&new_client->dev, - &dev_attr_fan3_div); - device_create_file(&new_client->dev, - &dev_attr_fan3_status); - } - - if (FAN_CONFIG_CONTROL(data->fan_conf, 2)) - device_create_file(&new_client->dev, &dev_attr_pwm3); - } - - return 0; - -ERROR2: - for (i = 0; i < 3; i++) { - if (data->address[i]) { - release_region(data->address[i], PC87360_EXTENT); - } - } -ERROR1: - kfree(data); - return err; -} - -static int pc87360_detach_client(struct i2c_client *client) -{ - struct pc87360_data *data = i2c_get_clientdata(client); - int i; - - if ((i = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return i; - } - - for (i = 0; i < 3; i++) { - if (data->address[i]) { - release_region(data->address[i], PC87360_EXTENT); - } - } - kfree(data); - - return 0; -} - -/* ldi is the logical device index - bank is for voltages and temperatures only */ -static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank, - u8 reg) -{ - int res; - - down(&(data->lock)); - if (bank != NO_BANK) - outb_p(bank, data->address[ldi] + PC87365_REG_BANK); - res = inb_p(data->address[ldi] + reg); - up(&(data->lock)); - - return res; -} - -static void pc87360_write_value(struct pc87360_data *data, u8 ldi, u8 bank, - u8 reg, u8 value) -{ - down(&(data->lock)); - if (bank != NO_BANK) - outb_p(bank, data->address[ldi] + PC87365_REG_BANK); - outb_p(value, data->address[ldi] + reg); - up(&(data->lock)); -} - -static void pc87360_init_client(struct i2c_client *client, int use_thermistors) -{ - struct pc87360_data *data = i2c_get_clientdata(client); - int i, nr; - const u8 init_in[14] = { 2, 2, 2, 2, 2, 2, 2, 1, 1, 3, 1, 2, 2, 2 }; - const u8 init_temp[3] = { 2, 2, 1 }; - u8 reg; - - if (init >= 2 && data->innr) { - reg = pc87360_read_value(data, LD_IN, NO_BANK, - PC87365_REG_IN_CONVRATE); - dev_info(&client->dev, "VLM conversion set to" - "1s period, 160us delay\n"); - pc87360_write_value(data, LD_IN, NO_BANK, - PC87365_REG_IN_CONVRATE, - (reg & 0xC0) | 0x11); - } - - nr = data->innr < 11 ? data->innr : 11; - for (i=0; i<nr; i++) { - if (init >= init_in[i]) { - /* Forcibly enable voltage channel */ - reg = pc87360_read_value(data, LD_IN, i, - PC87365_REG_IN_STATUS); - if (!(reg & 0x01)) { - dev_dbg(&client->dev, "Forcibly " - "enabling in%d\n", i); - pc87360_write_value(data, LD_IN, i, - PC87365_REG_IN_STATUS, - (reg & 0x68) | 0x87); - } - } - } - - /* We can't blindly trust the Super-I/O space configuration bit, - most BIOS won't set it properly */ - for (i=11; i<data->innr; i++) { - reg = pc87360_read_value(data, LD_IN, i, - PC87365_REG_TEMP_STATUS); - use_thermistors = use_thermistors || (reg & 0x01); - } - - i = use_thermistors ? 2 : 0; - for (; i<data->tempnr; i++) { - if (init >= init_temp[i]) { - /* Forcibly enable temperature channel */ - reg = pc87360_read_value(data, LD_TEMP, i, - PC87365_REG_TEMP_STATUS); - if (!(reg & 0x01)) { - dev_dbg(&client->dev, "Forcibly " - "enabling temp%d\n", i+1); - pc87360_write_value(data, LD_TEMP, i, - PC87365_REG_TEMP_STATUS, - 0xCF); - } - } - } - - if (use_thermistors) { - for (i=11; i<data->innr; i++) { - if (init >= init_in[i]) { - /* The pin may already be used by thermal - diodes */ - reg = pc87360_read_value(data, LD_TEMP, - (i-11)/2, PC87365_REG_TEMP_STATUS); - if (reg & 0x01) { - dev_dbg(&client->dev, "Skipping " - "temp%d, pin already in use " - "by temp%d\n", i-7, (i-11)/2); - continue; - } - - /* Forcibly enable thermistor channel */ - reg = pc87360_read_value(data, LD_IN, i, - PC87365_REG_IN_STATUS); - if (!(reg & 0x01)) { - dev_dbg(&client->dev, "Forcibly " - "enabling temp%d\n", i-7); - pc87360_write_value(data, LD_IN, i, - PC87365_REG_TEMP_STATUS, - (reg & 0x60) | 0x8F); - } - } - } - } - - if (data->innr) { - reg = pc87360_read_value(data, LD_IN, NO_BANK, - PC87365_REG_IN_CONFIG); - if (reg & 0x01) { - dev_dbg(&client->dev, "Forcibly " - "enabling monitoring (VLM)\n"); - pc87360_write_value(data, LD_IN, NO_BANK, - PC87365_REG_IN_CONFIG, - reg & 0xFE); - } - } - - if (data->tempnr) { - reg = pc87360_read_value(data, LD_TEMP, NO_BANK, - PC87365_REG_TEMP_CONFIG); - if (reg & 0x01) { - dev_dbg(&client->dev, "Forcibly enabling " - "monitoring (TMS)\n"); - pc87360_write_value(data, LD_TEMP, NO_BANK, - PC87365_REG_TEMP_CONFIG, - reg & 0xFE); - } - - if (init >= 2) { - /* Chip config as documented by National Semi. */ - pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08); - /* We voluntarily omit the bank here, in case the - sequence itself matters. It shouldn't be a problem, - since nobody else is supposed to access the - device at that point. */ - pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04); - pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35); - pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05); - pc87360_write_value(data, LD_TEMP, NO_BANK, 0xE, 0x05); - } - } -} - -static void pc87360_autodiv(struct i2c_client *client, int nr) -{ - struct pc87360_data *data = i2c_get_clientdata(client); - u8 old_min = data->fan_min[nr]; - - /* Increase clock divider if needed and possible */ - if ((data->fan_status[nr] & 0x04) /* overflow flag */ - || (data->fan[nr] >= 224)) { /* next to overflow */ - if ((data->fan_status[nr] & 0x60) != 0x60) { - data->fan_status[nr] += 0x20; - data->fan_min[nr] >>= 1; - data->fan[nr] >>= 1; - dev_dbg(&client->dev, "Increasing " - "clock divider to %d for fan %d\n", - FAN_DIV_FROM_REG(data->fan_status[nr]), nr+1); - } - } else { - /* Decrease clock divider if possible */ - while (!(data->fan_min[nr] & 0x80) /* min "nails" divider */ - && data->fan[nr] < 85 /* bad accuracy */ - && (data->fan_status[nr] & 0x60) != 0x00) { - data->fan_status[nr] -= 0x20; - data->fan_min[nr] <<= 1; - data->fan[nr] <<= 1; - dev_dbg(&client->dev, "Decreasing " - "clock divider to %d for fan %d\n", - FAN_DIV_FROM_REG(data->fan_status[nr]), - nr+1); - } - } - - /* Write new fan min if it changed */ - if (old_min != data->fan_min[nr]) { - pc87360_write_value(data, LD_FAN, NO_BANK, - PC87360_REG_FAN_MIN(nr), - data->fan_min[nr]); - } -} - -static struct pc87360_data *pc87360_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct pc87360_data *data = i2c_get_clientdata(client); - u8 i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { - dev_dbg(&client->dev, "Data update\n"); - - /* Fans */ - for (i = 0; i < data->fannr; i++) { - if (FAN_CONFIG_MONITOR(data->fan_conf, i)) { - data->fan_status[i] = - pc87360_read_value(data, LD_FAN, - NO_BANK, PC87360_REG_FAN_STATUS(i)); - data->fan[i] = pc87360_read_value(data, LD_FAN, - NO_BANK, PC87360_REG_FAN(i)); - data->fan_min[i] = pc87360_read_value(data, - LD_FAN, NO_BANK, - PC87360_REG_FAN_MIN(i)); - /* Change clock divider if needed */ - pc87360_autodiv(client, i); - /* Clear bits and write new divider */ - pc87360_write_value(data, LD_FAN, NO_BANK, - PC87360_REG_FAN_STATUS(i), - data->fan_status[i]); - } - if (FAN_CONFIG_CONTROL(data->fan_conf, i)) - data->pwm[i] = pc87360_read_value(data, LD_FAN, - NO_BANK, PC87360_REG_PWM(i)); - } - - /* Voltages */ - for (i = 0; i < data->innr; i++) { - data->in_status[i] = pc87360_read_value(data, LD_IN, i, - PC87365_REG_IN_STATUS); - /* Clear bits */ - pc87360_write_value(data, LD_IN, i, - PC87365_REG_IN_STATUS, - data->in_status[i]); - if ((data->in_status[i] & 0x81) == 0x81) { - data->in[i] = pc87360_read_value(data, LD_IN, - i, PC87365_REG_IN); - } - if (data->in_status[i] & 0x01) { - data->in_min[i] = pc87360_read_value(data, - LD_IN, i, - PC87365_REG_IN_MIN); - data->in_max[i] = pc87360_read_value(data, - LD_IN, i, - PC87365_REG_IN_MAX); - if (i >= 11) - data->in_crit[i-11] = - pc87360_read_value(data, LD_IN, - i, PC87365_REG_TEMP_CRIT); - } - } - if (data->innr) { - data->in_alarms = pc87360_read_value(data, LD_IN, - NO_BANK, PC87365_REG_IN_ALARMS1) - | ((pc87360_read_value(data, LD_IN, - NO_BANK, PC87365_REG_IN_ALARMS2) - & 0x07) << 8); - data->vid = (data->vid_conf & 0xE0) ? - pc87360_read_value(data, LD_IN, - NO_BANK, PC87365_REG_VID) : 0x1F; - } - - /* Temperatures */ - for (i = 0; i < data->tempnr; i++) { - data->temp_status[i] = pc87360_read_value(data, - LD_TEMP, i, - PC87365_REG_TEMP_STATUS); - /* Clear bits */ - pc87360_write_value(data, LD_TEMP, i, - PC87365_REG_TEMP_STATUS, - data->temp_status[i]); - if ((data->temp_status[i] & 0x81) == 0x81) { - data->temp[i] = pc87360_read_value(data, - LD_TEMP, i, - PC87365_REG_TEMP); - } - if (data->temp_status[i] & 0x01) { - data->temp_min[i] = pc87360_read_value(data, - LD_TEMP, i, - PC87365_REG_TEMP_MIN); - data->temp_max[i] = pc87360_read_value(data, - LD_TEMP, i, - PC87365_REG_TEMP_MAX); - data->temp_crit[i] = pc87360_read_value(data, - LD_TEMP, i, - PC87365_REG_TEMP_CRIT); - } - } - if (data->tempnr) { - data->temp_alarms = pc87360_read_value(data, LD_TEMP, - NO_BANK, PC87365_REG_TEMP_ALARMS) - & 0x3F; - } - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init pc87360_init(void) -{ - int i; - - if (pc87360_find(0x2e, &devid, extra_isa) - && pc87360_find(0x4e, &devid, extra_isa)) { - printk(KERN_WARNING "pc87360: PC8736x not detected, " - "module not inserted.\n"); - return -ENODEV; - } - - /* Arbitrarily pick one of the addresses */ - for (i = 0; i < 3; i++) { - if (extra_isa[i] != 0x0000) { - normal_isa[0] = extra_isa[i]; - break; - } - } - - if (normal_isa[0] == 0x0000) { - printk(KERN_WARNING "pc87360: No active logical device, " - "module not inserted.\n"); - return -ENODEV; - } - - return i2c_add_driver(&pc87360_driver); -} - -static void __exit pc87360_exit(void) -{ - i2c_del_driver(&pc87360_driver); -} - - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("PC8736x hardware monitor"); -MODULE_LICENSE("GPL"); - -module_init(pc87360_init); -module_exit(pc87360_exit); diff --git a/drivers/i2c/chips/sis5595.c b/drivers/i2c/chips/sis5595.c deleted file mode 100644 index 6bbfc8fb4f13..000000000000 --- a/drivers/i2c/chips/sis5595.c +++ /dev/null @@ -1,817 +0,0 @@ -/* - sis5595.c - Part of lm_sensors, Linux kernel modules - for hardware monitoring - - Copyright (C) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>, - Kyösti Mälkki <kmalkki@cc.hut.fi>, and - Mark D. Studebaker <mdsxyz123@yahoo.com> - Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with - the help of Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - SiS southbridge has a LM78-like chip integrated on the same IC. - This driver is a customized copy of lm78.c - - Supports following revisions: - Version PCI ID PCI Revision - 1 1039/0008 AF or less - 2 1039/0008 B0 or greater - - Note: these chips contain a 0008 device which is incompatible with the - 5595. We recognize these by the presence of the listed - "blacklist" PCI ID and refuse to load. - - NOT SUPPORTED PCI ID BLACKLIST PCI ID - 540 0008 0540 - 550 0008 0550 - 5513 0008 5511 - 5581 0008 5597 - 5582 0008 5597 - 5597 0008 5597 - 5598 0008 5597/5598 - 630 0008 0630 - 645 0008 0645 - 730 0008 0730 - 735 0008 0735 -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/pci.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/init.h> -#include <linux/jiffies.h> -#include <asm/io.h> - - -/* If force_addr is set to anything different from 0, we forcibly enable - the device at the given address. */ -static u16 force_addr; -module_param(force_addr, ushort, 0); -MODULE_PARM_DESC(force_addr, - "Initialize the base address of the sensors"); - -/* Addresses to scan. - Note that we can't determine the ISA address until we have initialized - our module */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(sis5595); - -/* Many SIS5595 constants specified below */ - -/* Length of ISA address segment */ -#define SIS5595_EXTENT 8 -/* PCI Config Registers */ -#define SIS5595_REVISION_REG 0x08 -#define SIS5595_BASE_REG 0x68 -#define SIS5595_PIN_REG 0x7A -#define SIS5595_ENABLE_REG 0x7B - -/* Where are the ISA address/data registers relative to the base address */ -#define SIS5595_ADDR_REG_OFFSET 5 -#define SIS5595_DATA_REG_OFFSET 6 - -/* The SIS5595 registers */ -#define SIS5595_REG_IN_MAX(nr) (0x2b + (nr) * 2) -#define SIS5595_REG_IN_MIN(nr) (0x2c + (nr) * 2) -#define SIS5595_REG_IN(nr) (0x20 + (nr)) - -#define SIS5595_REG_FAN_MIN(nr) (0x3b + (nr)) -#define SIS5595_REG_FAN(nr) (0x28 + (nr)) - -/* On the first version of the chip, the temp registers are separate. - On the second version, - TEMP pin is shared with IN4, configured in PCI register 0x7A. - The registers are the same as well. - OVER and HYST are really MAX and MIN. */ - -#define REV2MIN 0xb0 -#define SIS5595_REG_TEMP (( data->revision) >= REV2MIN) ? \ - SIS5595_REG_IN(4) : 0x27 -#define SIS5595_REG_TEMP_OVER (( data->revision) >= REV2MIN) ? \ - SIS5595_REG_IN_MAX(4) : 0x39 -#define SIS5595_REG_TEMP_HYST (( data->revision) >= REV2MIN) ? \ - SIS5595_REG_IN_MIN(4) : 0x3a - -#define SIS5595_REG_CONFIG 0x40 -#define SIS5595_REG_ALARM1 0x41 -#define SIS5595_REG_ALARM2 0x42 -#define SIS5595_REG_FANDIV 0x47 - -/* Conversions. Limit checking is only done on the TO_REG - variants. */ - -/* IN: mV, (0V to 4.08V) - REG: 16mV/bit */ -static inline u8 IN_TO_REG(unsigned long val) -{ - unsigned long nval = SENSORS_LIMIT(val, 0, 4080); - return (nval + 8) / 16; -} -#define IN_FROM_REG(val) ((val) * 16) - -static inline u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm <= 0) - return 255; - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); -} - -static inline int FAN_FROM_REG(u8 val, int div) -{ - return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); -} - -/* TEMP: mC (-54.12C to +157.53C) - REG: 0.83C/bit + 52.12, two's complement */ -static inline int TEMP_FROM_REG(s8 val) -{ - return val * 830 + 52120; -} -static inline s8 TEMP_TO_REG(int val) -{ - int nval = SENSORS_LIMIT(val, -54120, 157530) ; - return nval<0 ? (nval-5212-415)/830 : (nval-5212+415)/830; -} - -/* FAN DIV: 1, 2, 4, or 8 (defaults to 2) - REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */ -static inline u8 DIV_TO_REG(int val) -{ - return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1; -} -#define DIV_FROM_REG(val) (1 << (val)) - -/* For the SIS5595, we need to keep some data in memory. That - data is pointed to by sis5595_list[NR]->data. The structure itself is - dynamically allocated, at the time when the new sis5595 client is - allocated. */ -struct sis5595_data { - struct i2c_client client; - struct semaphore lock; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - char maxins; /* == 3 if temp enabled, otherwise == 4 */ - u8 revision; /* Reg. value */ - - u8 in[5]; /* Register value */ - u8 in_max[5]; /* Register value */ - u8 in_min[5]; /* Register value */ - u8 fan[2]; /* Register value */ - u8 fan_min[2]; /* Register value */ - s8 temp; /* Register value */ - s8 temp_over; /* Register value */ - s8 temp_hyst; /* Register value */ - u8 fan_div[2]; /* Register encoding, shifted right */ - u16 alarms; /* Register encoding, combined */ -}; - -static struct pci_dev *s_bridge; /* pointer to the (only) sis5595 */ - -static int sis5595_attach_adapter(struct i2c_adapter *adapter); -static int sis5595_detect(struct i2c_adapter *adapter, int address, int kind); -static int sis5595_detach_client(struct i2c_client *client); - -static int sis5595_read_value(struct i2c_client *client, u8 register); -static int sis5595_write_value(struct i2c_client *client, u8 register, u8 value); -static struct sis5595_data *sis5595_update_device(struct device *dev); -static void sis5595_init_client(struct i2c_client *client); - -static struct i2c_driver sis5595_driver = { - .owner = THIS_MODULE, - .name = "sis5595", - .id = I2C_DRIVERID_SIS5595, - .flags = I2C_DF_NOTIFY, - .attach_adapter = sis5595_attach_adapter, - .detach_client = sis5595_detach_client, -}; - -/* 4 Voltages */ -static ssize_t show_in(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); -} - -static ssize_t show_in_min(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); -} - -static ssize_t show_in_max(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); -} - -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_IN_MIN(nr), data->in_min[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_IN_MAX(nr), data->in_max[nr]); - up(&data->update_lock); - return count; -} - -#define show_in_offset(offset) \ -static ssize_t \ - show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, \ - show_in##offset, NULL); \ -static ssize_t \ - show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t \ - show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); - -/* Temperature */ -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); -} - -static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); -} - -static ssize_t set_temp_over(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_over = TEMP_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_TEMP_OVER, data->temp_over); - up(&data->update_lock); - return count; -} - -static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); -} - -static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_hyst = TEMP_TO_REG(val); - sis5595_write_value(client, SIS5595_REG_TEMP_HYST, data->temp_hyst); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, - show_temp_over, set_temp_over); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, - show_temp_hyst, set_temp_hyst); - -/* 2 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr])) ); -} - -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])) ); -} - -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) ); -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - unsigned long min; - unsigned long val = simple_strtoul(buf, NULL, 10); - int reg; - - down(&data->update_lock); - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - reg = sis5595_read_value(client, SIS5595_REG_FANDIV); - - switch (val) { - case 1: data->fan_div[nr] = 0; break; - case 2: data->fan_div[nr] = 1; break; - case 4: data->fan_div[nr] = 2; break; - case 8: data->fan_div[nr] = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); - return -EINVAL; - } - - switch (nr) { - case 0: - reg = (reg & 0xcf) | (data->fan_div[nr] << 4); - break; - case 1: - reg = (reg & 0x3f) | (data->fan_div[nr] << 6); - break; - } - sis5595_write_value(client, SIS5595_REG_FANDIV, reg); - data->fan_min[nr] = - FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - sis5595_write_value(client, SIS5595_REG_FAN_MIN(nr), data->fan_min[nr]); - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); - -show_fan_offset(1); -show_fan_offset(2); - -static ssize_t set_fan_1_div(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - return set_fan_div(dev, buf, count, 0) ; -} - -static ssize_t set_fan_2_div(struct device *dev, struct device_attribute *attr, const char *buf, - size_t count) -{ - return set_fan_div(dev, buf, count, 1) ; -} -static DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, - show_fan_1_div, set_fan_1_div); -static DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, - show_fan_2_div, set_fan_2_div); - -/* Alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct sis5595_data *data = sis5595_update_device(dev); - return sprintf(buf, "%d\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* This is called when the module is loaded */ -static int sis5595_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, sis5595_detect); -} - -int sis5595_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int err = 0; - int i; - struct i2c_client *new_client; - struct sis5595_data *data; - char val; - u16 a; - - /* Make sure we are probing the ISA bus!! */ - if (!i2c_is_isa_adapter(adapter)) - goto exit; - - if (force_addr) - address = force_addr & ~(SIS5595_EXTENT - 1); - /* Reserve the ISA region */ - if (!request_region(address, SIS5595_EXTENT, sis5595_driver.name)) { - err = -EBUSY; - goto exit; - } - if (force_addr) { - dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", address); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(s_bridge, SIS5595_BASE_REG, address)) - goto exit_release; - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(s_bridge, SIS5595_BASE_REG, &a)) - goto exit_release; - if ((a & ~(SIS5595_EXTENT - 1)) != address) - /* doesn't work for some chips? */ - goto exit_release; - } - - if (PCIBIOS_SUCCESSFUL != - pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) { - goto exit_release; - } - if ((val & 0x80) == 0) { - if (PCIBIOS_SUCCESSFUL != - pci_write_config_byte(s_bridge, SIS5595_ENABLE_REG, - val | 0x80)) - goto exit_release; - if (PCIBIOS_SUCCESSFUL != - pci_read_config_byte(s_bridge, SIS5595_ENABLE_REG, &val)) - goto exit_release; - if ((val & 0x80) == 0) - /* doesn't work for some chips! */ - goto exit_release; - } - - if (!(data = kmalloc(sizeof(struct sis5595_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit_release; - } - memset(data, 0, sizeof(struct sis5595_data)); - - new_client = &data->client; - new_client->addr = address; - init_MUTEX(&data->lock); - i2c_set_clientdata(new_client, data); - new_client->adapter = adapter; - new_client->driver = &sis5595_driver; - new_client->flags = 0; - - /* Check revision and pin registers to determine whether 4 or 5 voltages */ - pci_read_config_byte(s_bridge, SIS5595_REVISION_REG, &(data->revision)); - /* 4 voltages, 1 temp */ - data->maxins = 3; - if (data->revision >= REV2MIN) { - pci_read_config_byte(s_bridge, SIS5595_PIN_REG, &val); - if (!(val & 0x80)) - /* 5 voltages, no temps */ - data->maxins = 4; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, "sis5595", I2C_NAME_SIZE); - - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* Initialize the SIS5595 chip */ - sis5595_init_client(new_client); - - /* A few vars need to be filled upon startup */ - for (i = 0; i < 2; i++) { - data->fan_min[i] = sis5595_read_value(new_client, - SIS5595_REG_FAN_MIN(i)); - } - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in3_max); - if (data->maxins == 4) { - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in4_max); - } - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_alarms); - if (data->maxins == 3) { - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - } - return 0; - -exit_free: - kfree(data); -exit_release: - release_region(address, SIS5595_EXTENT); -exit: - return err; -} - -static int sis5595_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - if (i2c_is_isa_client(client)) - release_region(client->addr, SIS5595_EXTENT); - - kfree(i2c_get_clientdata(client)); - - return 0; -} - - -/* ISA access must be locked explicitly. */ -static int sis5595_read_value(struct i2c_client *client, u8 reg) -{ - int res; - - struct sis5595_data *data = i2c_get_clientdata(client); - down(&data->lock); - outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); - res = inb_p(client->addr + SIS5595_DATA_REG_OFFSET); - up(&data->lock); - return res; -} - -static int sis5595_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - struct sis5595_data *data = i2c_get_clientdata(client); - down(&data->lock); - outb_p(reg, client->addr + SIS5595_ADDR_REG_OFFSET); - outb_p(value, client->addr + SIS5595_DATA_REG_OFFSET); - up(&data->lock); - return 0; -} - -/* Called when we have found a new SIS5595. */ -static void sis5595_init_client(struct i2c_client *client) -{ - u8 config = sis5595_read_value(client, SIS5595_REG_CONFIG); - if (!(config & 0x01)) - sis5595_write_value(client, SIS5595_REG_CONFIG, - (config & 0xf7) | 0x01); -} - -static struct sis5595_data *sis5595_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct sis5595_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - - for (i = 0; i <= data->maxins; i++) { - data->in[i] = - sis5595_read_value(client, SIS5595_REG_IN(i)); - data->in_min[i] = - sis5595_read_value(client, - SIS5595_REG_IN_MIN(i)); - data->in_max[i] = - sis5595_read_value(client, - SIS5595_REG_IN_MAX(i)); - } - for (i = 0; i < 2; i++) { - data->fan[i] = - sis5595_read_value(client, SIS5595_REG_FAN(i)); - data->fan_min[i] = - sis5595_read_value(client, - SIS5595_REG_FAN_MIN(i)); - } - if (data->maxins == 3) { - data->temp = - sis5595_read_value(client, SIS5595_REG_TEMP); - data->temp_over = - sis5595_read_value(client, SIS5595_REG_TEMP_OVER); - data->temp_hyst = - sis5595_read_value(client, SIS5595_REG_TEMP_HYST); - } - i = sis5595_read_value(client, SIS5595_REG_FANDIV); - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = i >> 6; - data->alarms = - sis5595_read_value(client, SIS5595_REG_ALARM1) | - (sis5595_read_value(client, SIS5595_REG_ALARM2) << 8); - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static struct pci_device_id sis5595_pci_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, sis5595_pci_ids); - -static int blacklist[] __devinitdata = { - PCI_DEVICE_ID_SI_540, - PCI_DEVICE_ID_SI_550, - PCI_DEVICE_ID_SI_630, - PCI_DEVICE_ID_SI_645, - PCI_DEVICE_ID_SI_730, - PCI_DEVICE_ID_SI_735, - PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but - that ID shows up in other chips so we - use the 5511 ID for recognition */ - PCI_DEVICE_ID_SI_5597, - PCI_DEVICE_ID_SI_5598, - 0 }; - -static int __devinit sis5595_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - u16 val; - int *i; - int addr = 0; - - for (i = blacklist; *i != 0; i++) { - struct pci_dev *dev; - dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL); - if (dev) { - dev_err(&dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i); - pci_dev_put(dev); - return -ENODEV; - } - } - - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(dev, SIS5595_BASE_REG, &val)) - return -ENODEV; - - addr = val & ~(SIS5595_EXTENT - 1); - if (addr == 0 && force_addr == 0) { - dev_err(&dev->dev, "Base address not set - upgrade BIOS or use force_addr=0xaddr\n"); - return -ENODEV; - } - if (force_addr) - addr = force_addr; /* so detect will get called */ - - if (!addr) { - dev_err(&dev->dev,"No SiS 5595 sensors found.\n"); - return -ENODEV; - } - normal_isa[0] = addr; - - s_bridge = pci_dev_get(dev); - if (i2c_add_driver(&sis5595_driver)) { - pci_dev_put(s_bridge); - s_bridge = NULL; - } - - /* Always return failure here. This is to allow other drivers to bind - * to this pci device. We don't really want to have control over the - * pci device, we only wanted to read as few register values from it. - */ - return -ENODEV; -} - -static struct pci_driver sis5595_pci_driver = { - .name = "sis5595", - .id_table = sis5595_pci_ids, - .probe = sis5595_pci_probe, -}; - -static int __init sm_sis5595_init(void) -{ - return pci_register_driver(&sis5595_pci_driver); -} - -static void __exit sm_sis5595_exit(void) -{ - pci_unregister_driver(&sis5595_pci_driver); - if (s_bridge != NULL) { - i2c_del_driver(&sis5595_driver); - pci_dev_put(s_bridge); - s_bridge = NULL; - } -} - -MODULE_AUTHOR("Aurelien Jarno <aurelien@aurel32.net>"); -MODULE_DESCRIPTION("SiS 5595 Sensor device"); -MODULE_LICENSE("GPL"); - -module_init(sm_sis5595_init); -module_exit(sm_sis5595_exit); diff --git a/drivers/i2c/chips/smsc47b397.c b/drivers/i2c/chips/smsc47b397.c deleted file mode 100644 index 251ac2659554..000000000000 --- a/drivers/i2c/chips/smsc47b397.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - smsc47b397.c - Part of lm_sensors, Linux kernel modules - for hardware monitoring - - Supports the SMSC LPC47B397-NC Super-I/O chip. - - Author/Maintainer: Mark M. Hoffman <mhoffman@lightlink.com> - Copyright (C) 2004 Utilitek Systems, Inc. - - derived in part from smsc47m1.c: - Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> - Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/init.h> -#include <asm/io.h> - -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -/* Address is autodetected, there is no default value */ -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; -static struct i2c_force_data forces[] = {{NULL}}; - -enum chips { any_chip, smsc47b397 }; -static struct i2c_address_data addr_data = { - .normal_i2c = normal_i2c, - .normal_isa = normal_isa, - .probe = normal_i2c, /* cheat */ - .ignore = normal_i2c, /* cheat */ - .forces = forces, -}; - -/* Super-I/0 registers and commands */ - -#define REG 0x2e /* The register to read/write */ -#define VAL 0x2f /* The value to read/write */ - -static inline void superio_outb(int reg, int val) -{ - outb(reg, REG); - outb(val, VAL); -} - -static inline int superio_inb(int reg) -{ - outb(reg, REG); - return inb(VAL); -} - -/* select superio logical device */ -static inline void superio_select(int ld) -{ - superio_outb(0x07, ld); -} - -static inline void superio_enter(void) -{ - outb(0x55, REG); -} - -static inline void superio_exit(void) -{ - outb(0xAA, REG); -} - -#define SUPERIO_REG_DEVID 0x20 -#define SUPERIO_REG_DEVREV 0x21 -#define SUPERIO_REG_BASE_MSB 0x60 -#define SUPERIO_REG_BASE_LSB 0x61 -#define SUPERIO_REG_LD8 0x08 - -#define SMSC_EXTENT 0x02 - -/* 0 <= nr <= 3 */ -static u8 smsc47b397_reg_temp[] = {0x25, 0x26, 0x27, 0x80}; -#define SMSC47B397_REG_TEMP(nr) (smsc47b397_reg_temp[(nr)]) - -/* 0 <= nr <= 3 */ -#define SMSC47B397_REG_FAN_LSB(nr) (0x28 + 2 * (nr)) -#define SMSC47B397_REG_FAN_MSB(nr) (0x29 + 2 * (nr)) - -struct smsc47b397_data { - struct i2c_client client; - struct semaphore lock; - - struct semaphore update_lock; - unsigned long last_updated; /* in jiffies */ - int valid; - - /* register values */ - u16 fan[4]; - u8 temp[4]; -}; - -static int smsc47b397_read_value(struct i2c_client *client, u8 reg) -{ - struct smsc47b397_data *data = i2c_get_clientdata(client); - int res; - - down(&data->lock); - outb(reg, client->addr); - res = inb_p(client->addr + 1); - up(&data->lock); - return res; -} - -static struct smsc47b397_data *smsc47b397_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct smsc47b397_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { - dev_dbg(&client->dev, "starting device update...\n"); - - /* 4 temperature inputs, 4 fan inputs */ - for (i = 0; i < 4; i++) { - data->temp[i] = smsc47b397_read_value(client, - SMSC47B397_REG_TEMP(i)); - - /* must read LSB first */ - data->fan[i] = smsc47b397_read_value(client, - SMSC47B397_REG_FAN_LSB(i)); - data->fan[i] |= smsc47b397_read_value(client, - SMSC47B397_REG_FAN_MSB(i)) << 8; - } - - data->last_updated = jiffies; - data->valid = 1; - - dev_dbg(&client->dev, "... device update complete\n"); - } - - up(&data->update_lock); - - return data; -} - -/* TEMP: 0.001C/bit (-128C to +127C) - REG: 1C/bit, two's complement */ -static int temp_from_reg(u8 reg) -{ - return (s8)reg * 1000; -} - -/* 0 <= nr <= 3 */ -static ssize_t show_temp(struct device *dev, char *buf, int nr) -{ - struct smsc47b397_data *data = smsc47b397_update_device(dev); - return sprintf(buf, "%d\n", temp_from_reg(data->temp[nr])); -} - -#define sysfs_temp(num) \ -static ssize_t show_temp##num(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, num-1); \ -} \ -static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL) - -sysfs_temp(1); -sysfs_temp(2); -sysfs_temp(3); -sysfs_temp(4); - -#define device_create_file_temp(client, num) \ - device_create_file(&client->dev, &dev_attr_temp##num##_input) - -/* FAN: 1 RPM/bit - REG: count of 90kHz pulses / revolution */ -static int fan_from_reg(u16 reg) -{ - return 90000 * 60 / reg; -} - -/* 0 <= nr <= 3 */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) -{ - struct smsc47b397_data *data = smsc47b397_update_device(dev); - return sprintf(buf, "%d\n", fan_from_reg(data->fan[nr])); -} - -#define sysfs_fan(num) \ -static ssize_t show_fan##num(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, num-1); \ -} \ -static DEVICE_ATTR(fan##num##_input, S_IRUGO, show_fan##num, NULL) - -sysfs_fan(1); -sysfs_fan(2); -sysfs_fan(3); -sysfs_fan(4); - -#define device_create_file_fan(client, num) \ - device_create_file(&client->dev, &dev_attr_fan##num##_input) - -static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind); - -static int smsc47b397_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, smsc47b397_detect); -} - -static int smsc47b397_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - release_region(client->addr, SMSC_EXTENT); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -static struct i2c_driver smsc47b397_driver = { - .owner = THIS_MODULE, - .name = "smsc47b397", - .id = I2C_DRIVERID_SMSC47B397, - .flags = I2C_DF_NOTIFY, - .attach_adapter = smsc47b397_attach_adapter, - .detach_client = smsc47b397_detach_client, -}; - -static int smsc47b397_detect(struct i2c_adapter *adapter, int addr, int kind) -{ - struct i2c_client *new_client; - struct smsc47b397_data *data; - int err = 0; - - if (!i2c_is_isa_adapter(adapter)) { - return 0; - } - - if (!request_region(addr, SMSC_EXTENT, smsc47b397_driver.name)) { - dev_err(&adapter->dev, "Region 0x%x already in use!\n", addr); - return -EBUSY; - } - - if (!(data = kmalloc(sizeof(struct smsc47b397_data), GFP_KERNEL))) { - err = -ENOMEM; - goto error_release; - } - memset(data, 0x00, sizeof(struct smsc47b397_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = addr; - init_MUTEX(&data->lock); - new_client->adapter = adapter; - new_client->driver = &smsc47b397_driver; - new_client->flags = 0; - - strlcpy(new_client->name, "smsc47b397", I2C_NAME_SIZE); - - init_MUTEX(&data->update_lock); - - if ((err = i2c_attach_client(new_client))) - goto error_free; - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - device_create_file_temp(new_client, 3); - device_create_file_temp(new_client, 4); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - device_create_file_fan(new_client, 4); - - return 0; - -error_free: - kfree(new_client); -error_release: - release_region(addr, SMSC_EXTENT); - return err; -} - -static int __init smsc47b397_find(unsigned int *addr) -{ - u8 id, rev; - - superio_enter(); - id = superio_inb(SUPERIO_REG_DEVID); - - if (id != 0x6f) { - superio_exit(); - return -ENODEV; - } - - rev = superio_inb(SUPERIO_REG_DEVREV); - - superio_select(SUPERIO_REG_LD8); - *addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8) - | superio_inb(SUPERIO_REG_BASE_LSB); - - printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC " - "(base address 0x%04x, revision %u)\n", *addr, rev); - - superio_exit(); - return 0; -} - -static int __init smsc47b397_init(void) -{ - int ret; - - if ((ret = smsc47b397_find(normal_isa))) - return ret; - - return i2c_add_driver(&smsc47b397_driver); -} - -static void __exit smsc47b397_exit(void) -{ - i2c_del_driver(&smsc47b397_driver); -} - -MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); -MODULE_DESCRIPTION("SMSC LPC47B397 driver"); -MODULE_LICENSE("GPL"); - -module_init(smsc47b397_init); -module_exit(smsc47b397_exit); diff --git a/drivers/i2c/chips/smsc47m1.c b/drivers/i2c/chips/smsc47m1.c deleted file mode 100644 index 897117a7213f..000000000000 --- a/drivers/i2c/chips/smsc47m1.c +++ /dev/null @@ -1,593 +0,0 @@ -/* - smsc47m1.c - Part of lm_sensors, Linux kernel modules - for hardware monitoring - - Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x - Super-I/O chips. - - Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> - Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> - Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com> - and Jean Delvare - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/init.h> -#include <asm/io.h> - -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -/* Address is autodetected, there is no default value */ -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; -static struct i2c_force_data forces[] = {{NULL}}; - -enum chips { any_chip, smsc47m1 }; -static struct i2c_address_data addr_data = { - .normal_i2c = normal_i2c, - .normal_isa = normal_isa, - .forces = forces, -}; - -/* Super-I/0 registers and commands */ - -#define REG 0x2e /* The register to read/write */ -#define VAL 0x2f /* The value to read/write */ - -static inline void -superio_outb(int reg, int val) -{ - outb(reg, REG); - outb(val, VAL); -} - -static inline int -superio_inb(int reg) -{ - outb(reg, REG); - return inb(VAL); -} - -/* logical device for fans is 0x0A */ -#define superio_select() superio_outb(0x07, 0x0A) - -static inline void -superio_enter(void) -{ - outb(0x55, REG); -} - -static inline void -superio_exit(void) -{ - outb(0xAA, REG); -} - -#define SUPERIO_REG_ACT 0x30 -#define SUPERIO_REG_BASE 0x60 -#define SUPERIO_REG_DEVID 0x20 - -/* Logical device registers */ - -#define SMSC_EXTENT 0x80 - -/* nr is 0 or 1 in the macros below */ -#define SMSC47M1_REG_ALARM 0x04 -#define SMSC47M1_REG_TPIN(nr) (0x34 - (nr)) -#define SMSC47M1_REG_PPIN(nr) (0x36 - (nr)) -#define SMSC47M1_REG_PWM(nr) (0x56 + (nr)) -#define SMSC47M1_REG_FANDIV 0x58 -#define SMSC47M1_REG_FAN(nr) (0x59 + (nr)) -#define SMSC47M1_REG_FAN_PRELOAD(nr) (0x5B + (nr)) - -#define MIN_FROM_REG(reg,div) ((reg)>=192 ? 0 : \ - 983040/((192-(reg))*(div))) -#define FAN_FROM_REG(reg,div,preload) ((reg)<=(preload) || (reg)==255 ? 0 : \ - 983040/(((reg)-(preload))*(div))) -#define DIV_FROM_REG(reg) (1 << (reg)) -#define PWM_FROM_REG(reg) (((reg) & 0x7E) << 1) -#define PWM_EN_FROM_REG(reg) ((~(reg)) & 0x01) -#define PWM_TO_REG(reg) (((reg) >> 1) & 0x7E) - -struct smsc47m1_data { - struct i2c_client client; - struct semaphore lock; - - struct semaphore update_lock; - unsigned long last_updated; /* In jiffies */ - - u8 fan[2]; /* Register value */ - u8 fan_preload[2]; /* Register value */ - u8 fan_div[2]; /* Register encoding, shifted right */ - u8 alarms; /* Register encoding */ - u8 pwm[2]; /* Register value (bit 7 is enable) */ -}; - - -static int smsc47m1_attach_adapter(struct i2c_adapter *adapter); -static int smsc47m1_find(int *address); -static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind); -static int smsc47m1_detach_client(struct i2c_client *client); - -static int smsc47m1_read_value(struct i2c_client *client, u8 reg); -static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value); - -static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, - int init); - - -static struct i2c_driver smsc47m1_driver = { - .owner = THIS_MODULE, - .name = "smsc47m1", - .id = I2C_DRIVERID_SMSC47M1, - .flags = I2C_DF_NOTIFY, - .attach_adapter = smsc47m1_attach_adapter, - .detach_client = smsc47m1_detach_client, -}; - -/* nr is 0 or 1 in the callback functions below */ - -static ssize_t get_fan(struct device *dev, char *buf, int nr) -{ - struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); - /* This chip (stupidly) stops monitoring fan speed if PWM is - enabled and duty cycle is 0%. This is fine if the monitoring - and control concern the same fan, but troublesome if they are - not (which could as well happen). */ - int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 : - FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr]), - data->fan_preload[nr]); - return sprintf(buf, "%d\n", rpm); -} - -static ssize_t get_fan_min(struct device *dev, char *buf, int nr) -{ - struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); - int rpm = MIN_FROM_REG(data->fan_preload[nr], - DIV_FROM_REG(data->fan_div[nr])); - return sprintf(buf, "%d\n", rpm); -} - -static ssize_t get_fan_div(struct device *dev, char *buf, int nr) -{ - struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); -} - -static ssize_t get_pwm(struct device *dev, char *buf, int nr) -{ - struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); - return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); -} - -static ssize_t get_pwm_en(struct device *dev, char *buf, int nr) -{ - struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); - return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr])); -} - -static ssize_t get_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct smsc47m1_data *data = smsc47m1_update_device(dev, 0); - return sprintf(buf, "%d\n", data->alarms); -} - -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct smsc47m1_data *data = i2c_get_clientdata(client); - long rpmdiv, val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]); - - if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) { - up(&data->update_lock); - return -EINVAL; - } - - data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv); - smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), - data->fan_preload[nr]); - up(&data->update_lock); - - return count; -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan clock divider. This follows the principle - of least suprise; the user doesn't expect the fan minimum to change just - because the divider changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct smsc47m1_data *data = i2c_get_clientdata(client); - - long new_div = simple_strtol(buf, NULL, 10), tmp; - u8 old_div = DIV_FROM_REG(data->fan_div[nr]); - - if (new_div == old_div) /* No change */ - return count; - - down(&data->update_lock); - switch (new_div) { - case 1: data->fan_div[nr] = 0; break; - case 2: data->fan_div[nr] = 1; break; - case 4: data->fan_div[nr] = 2; break; - case 8: data->fan_div[nr] = 3; break; - default: - up(&data->update_lock); - return -EINVAL; - } - - tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F; - tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6); - smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp); - - /* Preserve fan min */ - tmp = 192 - (old_div * (192 - data->fan_preload[nr]) - + new_div / 2) / new_div; - data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191); - smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr), - data->fan_preload[nr]); - up(&data->update_lock); - - return count; -} - -static ssize_t set_pwm(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct smsc47m1_data *data = i2c_get_clientdata(client); - - long val = simple_strtol(buf, NULL, 10); - - if (val < 0 || val > 255) - return -EINVAL; - - down(&data->update_lock); - data->pwm[nr] &= 0x81; /* Preserve additional bits */ - data->pwm[nr] |= PWM_TO_REG(val); - smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), - data->pwm[nr]); - up(&data->update_lock); - - return count; -} - -static ssize_t set_pwm_en(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct smsc47m1_data *data = i2c_get_clientdata(client); - - long val = simple_strtol(buf, NULL, 10); - - if (val != 0 && val != 1) - return -EINVAL; - - down(&data->update_lock); - data->pwm[nr] &= 0xFE; /* preserve the other bits */ - data->pwm[nr] |= !val; - smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr), - data->pwm[nr]); - up(&data->update_lock); - - return count; -} - -#define fan_present(offset) \ -static ssize_t get_fan##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return get_fan(dev, buf, offset - 1); \ -} \ -static ssize_t get_fan##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return get_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t get_fan##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return get_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan##offset##_div (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_div(dev, buf, count, offset - 1); \ -} \ -static ssize_t get_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return get_pwm(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm(dev, buf, count, offset - 1); \ -} \ -static ssize_t get_pwm##offset##_en (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return get_pwm_en(dev, buf, offset - 1); \ -} \ -static ssize_t set_pwm##offset##_en (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_pwm_en(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset, \ - NULL); \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - get_fan##offset##_min, set_fan##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - get_fan##offset##_div, set_fan##offset##_div); \ -static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - get_pwm##offset, set_pwm##offset); \ -static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - get_pwm##offset##_en, set_pwm##offset##_en); - -fan_present(1); -fan_present(2); - -static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL); - -static int smsc47m1_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, smsc47m1_detect); -} - -static int smsc47m1_find(int *address) -{ - u8 val; - - superio_enter(); - val = superio_inb(SUPERIO_REG_DEVID); - - /* - * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id - * 0x5F) and LPC47B27x (device id 0x51) have fan control. - * The LPC47M15x and LPC47M192 chips "with hardware monitoring block" - * can do much more besides (device id 0x60). - */ - if (val == 0x51) - printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n"); - else if (val == 0x59) - printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n"); - else if (val == 0x5F) - printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n"); - else if (val == 0x60) - printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n"); - else { - superio_exit(); - return -ENODEV; - } - - superio_select(); - *address = (superio_inb(SUPERIO_REG_BASE) << 8) - | superio_inb(SUPERIO_REG_BASE + 1); - val = superio_inb(SUPERIO_REG_ACT); - if (*address == 0 || (val & 0x01) == 0) { - printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n"); - superio_exit(); - return -ENODEV; - } - - superio_exit(); - return 0; -} - -static int smsc47m1_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct smsc47m1_data *data; - int err = 0; - int fan1, fan2, pwm1, pwm2; - - if (!i2c_is_isa_adapter(adapter)) { - return 0; - } - - if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) { - dev_err(&adapter->dev, "Region 0x%x already in use!\n", address); - return -EBUSY; - } - - if (!(data = kmalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { - err = -ENOMEM; - goto error_release; - } - memset(data, 0x00, sizeof(struct smsc47m1_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - init_MUTEX(&data->lock); - new_client->adapter = adapter; - new_client->driver = &smsc47m1_driver; - new_client->flags = 0; - - strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE); - init_MUTEX(&data->update_lock); - - /* If no function is properly configured, there's no point in - actually registering the chip. */ - fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05) - == 0x05; - fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05) - == 0x05; - pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05) - == 0x04; - pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05) - == 0x04; - if (!(fan1 || fan2 || pwm1 || pwm2)) { - dev_warn(&new_client->dev, "Device is not configured, will not use\n"); - err = -ENODEV; - goto error_free; - } - - if ((err = i2c_attach_client(new_client))) - goto error_free; - - /* Some values (fan min, clock dividers, pwm registers) may be - needed before any update is triggered, so we better read them - at least once here. We don't usually do it that way, but in - this particular case, manually reading 5 registers out of 8 - doesn't make much sense and we're better using the existing - function. */ - smsc47m1_update_device(&new_client->dev, 1); - - if (fan1) { - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - } else - dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, " - "skipping\n"); - - if (fan2) { - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - } else - dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, " - "skipping\n"); - - if (pwm1) { - device_create_file(&new_client->dev, &dev_attr_pwm1); - device_create_file(&new_client->dev, &dev_attr_pwm1_enable); - } else - dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, " - "skipping\n"); - if (pwm2) { - device_create_file(&new_client->dev, &dev_attr_pwm2); - device_create_file(&new_client->dev, &dev_attr_pwm2_enable); - } else - dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, " - "skipping\n"); - - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -error_free: - kfree(new_client); -error_release: - release_region(address, SMSC_EXTENT); - return err; -} - -static int smsc47m1_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - release_region(client->addr, SMSC_EXTENT); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -static int smsc47m1_read_value(struct i2c_client *client, u8 reg) -{ - int res; - - down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); - res = inb_p(client->addr + reg); - up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); - return res; -} - -static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); - outb_p(value, client->addr + reg); - up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock); -} - -static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, - int init) -{ - struct i2c_client *client = to_i2c_client(dev); - struct smsc47m1_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) { - int i; - - for (i = 0; i < 2; i++) { - data->fan[i] = smsc47m1_read_value(client, - SMSC47M1_REG_FAN(i)); - data->fan_preload[i] = smsc47m1_read_value(client, - SMSC47M1_REG_FAN_PRELOAD(i)); - data->pwm[i] = smsc47m1_read_value(client, - SMSC47M1_REG_PWM(i)); - } - - i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV); - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = i >> 6; - - data->alarms = smsc47m1_read_value(client, - SMSC47M1_REG_ALARM) >> 6; - /* Clear alarms if needed */ - if (data->alarms) - smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0); - - data->last_updated = jiffies; - } - - up(&data->update_lock); - return data; -} - -static int __init sm_smsc47m1_init(void) -{ - if (smsc47m1_find(normal_isa)) { - return -ENODEV; - } - - return i2c_add_driver(&smsc47m1_driver); -} - -static void __exit sm_smsc47m1_exit(void) -{ - i2c_del_driver(&smsc47m1_driver); -} - -MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); -MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver"); -MODULE_LICENSE("GPL"); - -module_init(sm_smsc47m1_init); -module_exit(sm_smsc47m1_exit); diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index c0ac01b60039..280e9638c0f8 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -18,7 +18,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#undef DEBUG #include <linux/config.h> #include <linux/kernel.h> @@ -49,11 +48,7 @@ MODULE_DESCRIPTION("TPS6501x Power Management Driver"); MODULE_LICENSE("GPL"); -/* only two addresses possible */ -#define TPS_BASE 0x48 -static unsigned short normal_i2c[] = { - TPS_BASE, - I2C_CLIENT_END }; +static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END }; static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; I2C_CLIENT_INSMOD; @@ -102,7 +97,7 @@ struct tps65010 { u8 chgstatus, regstatus, chgconf; u8 nmask1, nmask2; - /* plus four GPIOs, probably used to switch power */ + /* not currently tracking GPIO state */ }; #define POWER_POLL_DELAY msecs_to_jiffies(800) @@ -135,7 +130,7 @@ static void dbg_regstat(char *buf, size_t len, u8 regstatus) (regstatus & TPS_REG_COVER) ? " uncover" : "", (regstatus & TPS_REG_UVLO) ? " UVLO" : "", (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "", - (regstatus & TPS_REG_PG_LD02) ? " ld01_bad" : "", + (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "", (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "", (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "", (regstatus & TPS_REG_PG_CORE) ? " core_bad" : ""); @@ -143,7 +138,7 @@ static void dbg_regstat(char *buf, size_t len, u8 regstatus) static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig) { - char *hibit; + const char *hibit; if (por) hibit = (chgconfig & TPS_CHARGE_POR) @@ -295,7 +290,7 @@ static int dbg_show(struct seq_file *s, void *_) seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2); for (i = 0; i < 4; i++) { - if (value & (1 << (4 +i))) + if (value & (1 << (4 + i))) seq_printf(s, " gpio%d-out %s\n", i + 1, (value & (1 << i)) ? "low" : "hi "); else @@ -481,7 +476,7 @@ static int __exit tps65010_detach_client(struct i2c_client *client) debugfs_remove(tps->file); if (i2c_detach_client(client) == 0) kfree(tps); - the_tps = 0; + the_tps = NULL; return 0; } @@ -514,7 +509,6 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) INIT_WORK(&tps->work, tps65010_work, tps); tps->irq = -1; tps->client.addr = address; - i2c_set_clientdata(&tps->client, tps); tps->client.adapter = bus; tps->client.driver = &tps65010_driver; strlcpy(tps->client.name, DRIVER_NAME, I2C_NAME_SIZE); @@ -523,9 +517,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) if (status < 0) { dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n", DRIVER_NAME, address, status); -fail1: - kfree(tps); - return 0; + goto fail1; } #ifdef CONFIG_ARM @@ -535,7 +527,7 @@ fail1: tps->irq = OMAP_GPIO_IRQ(58); omap_request_gpio(58); omap_set_gpio_direction(58, 1); - omap_set_gpio_edge_ctrl(58, OMAP_GPIO_FALLING_EDGE); + set_irq_type(tps->irq, IRQT_FALLING); } if (machine_is_omap_osk()) { tps->model = TPS65010; @@ -543,7 +535,7 @@ fail1: tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)); omap_request_gpio(OMAP_MPUIO(1)); omap_set_gpio_direction(OMAP_MPUIO(1), 1); - omap_set_gpio_edge_ctrl(OMAP_MPUIO(1), OMAP_GPIO_FALLING_EDGE); + set_irq_type(tps->irq, IRQT_FALLING); } if (machine_is_omap_h3()) { tps->model = TPS65013; @@ -633,6 +625,9 @@ fail1: tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL, tps, DEBUG_FOPS); return 0; +fail1: + kfree(tps); + return 0; } static int __init tps65010_scan_bus(struct i2c_adapter *bus) @@ -645,7 +640,6 @@ static int __init tps65010_scan_bus(struct i2c_adapter *bus) static struct i2c_driver tps65010_driver = { .owner = THIS_MODULE, .name = "tps65010", - .id = 888, /* FIXME assign "official" value */ .flags = I2C_DF_NOTIFY, .attach_adapter = tps65010_scan_bus, .detach_client = __exit_p(tps65010_detach_client), @@ -744,7 +738,7 @@ int tps65010_set_led(unsigned led, unsigned mode) if (!the_tps) return -ENODEV; - if(led == LED1) + if (led == LED1) offs = 0; else { offs = 2; @@ -753,11 +747,13 @@ int tps65010_set_led(unsigned led, unsigned mode) down(&the_tps->lock); - dev_dbg (&the_tps->client.dev, "led%i_on 0x%02x\n", led, - i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs)); + pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led, + i2c_smbus_read_byte_data(&the_tps->client, + TPS_LED1_ON + offs)); - dev_dbg (&the_tps->client.dev, "led%i_per 0x%02x\n", led, - i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_PER + offs)); + pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led, + i2c_smbus_read_byte_data(&the_tps->client, + TPS_LED1_PER + offs)); switch (mode) { case OFF: @@ -773,7 +769,7 @@ int tps65010_set_led(unsigned led, unsigned mode) led_per = 0x08 | (1 << 7); break; default: - printk(KERN_ERR "%s: Wrong mode parameter for tps65010_set_led()\n", + printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n", DRIVER_NAME); up(&the_tps->lock); return -EINVAL; @@ -789,7 +785,7 @@ int tps65010_set_led(unsigned led, unsigned mode) return status; } - dev_dbg (&the_tps->client.dev, "led%i_on 0x%02x\n", led, + pr_debug("%s: led%i_on 0x%02x\n", DRIVER_NAME, led, i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs)); status = i2c_smbus_write_byte_data(&the_tps->client, @@ -802,8 +798,9 @@ int tps65010_set_led(unsigned led, unsigned mode) return status; } - dev_dbg (&the_tps->client.dev, "led%i_per 0x%02x\n", led, - i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_PER + offs)); + pr_debug("%s: led%i_per 0x%02x\n", DRIVER_NAME, led, + i2c_smbus_read_byte_data(&the_tps->client, + TPS_LED1_PER + offs)); up(&the_tps->lock); @@ -874,7 +871,7 @@ int tps65010_set_low_pwr(unsigned mode) if (status != 0) printk(KERN_ERR "%s: Failed to write vdcdc1 register\n", - DRIVER_NAME); + DRIVER_NAME); else pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME, i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1)); @@ -900,14 +897,14 @@ int tps65010_config_vregs1(unsigned value) down(&the_tps->lock); pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME, - i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1)); + i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1)); status = i2c_smbus_write_byte_data(&the_tps->client, TPS_VREGS1, value); if (status != 0) printk(KERN_ERR "%s: Failed to write vregs1 register\n", - DRIVER_NAME); + DRIVER_NAME); else pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME, i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1)); @@ -1009,7 +1006,7 @@ static int __init tps_init(void) msleep(10); } -#if defined(CONFIG_ARM) +#ifdef CONFIG_ARM if (machine_is_omap_osk()) { // FIXME: More should be placed in the initialization code diff --git a/drivers/i2c/chips/via686a.c b/drivers/i2c/chips/via686a.c deleted file mode 100644 index 137d9b7cacd4..000000000000 --- a/drivers/i2c/chips/via686a.c +++ /dev/null @@ -1,875 +0,0 @@ -/* - via686a.c - Part of lm_sensors, Linux kernel modules - for hardware monitoring - - Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, - Kyösti Mälkki <kmalkki@cc.hut.fi>, - Mark Studebaker <mdsxyz123@yahoo.com>, - and Bob Dougherty <bobd@stanford.edu> - (Some conversion-factor data were contributed by Jonathan Teh Soon Yew - <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - Supports the Via VT82C686A, VT82C686B south bridges. - Reports all as a 686A. - Warning - only supports a single device. -*/ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/init.h> -#include <asm/io.h> - - -/* If force_addr is set to anything different from 0, we forcibly enable - the device at the given address. */ -static unsigned short force_addr = 0; -module_param(force_addr, ushort, 0); -MODULE_PARM_DESC(force_addr, - "Initialize the base address of the sensors"); - -/* Addresses to scan. - Note that we can't determine the ISA address until we have initialized - our module */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0000, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(via686a); - -/* - The Via 686a southbridge has a LM78-like chip integrated on the same IC. - This driver is a customized copy of lm78.c -*/ - -/* Many VIA686A constants specified below */ - -/* Length of ISA address segment */ -#define VIA686A_EXTENT 0x80 -#define VIA686A_BASE_REG 0x70 -#define VIA686A_ENABLE_REG 0x74 - -/* The VIA686A registers */ -/* ins numbered 0-4 */ -#define VIA686A_REG_IN_MAX(nr) (0x2b + ((nr) * 2)) -#define VIA686A_REG_IN_MIN(nr) (0x2c + ((nr) * 2)) -#define VIA686A_REG_IN(nr) (0x22 + (nr)) - -/* fans numbered 1-2 */ -#define VIA686A_REG_FAN_MIN(nr) (0x3a + (nr)) -#define VIA686A_REG_FAN(nr) (0x28 + (nr)) - -/* temps numbered 1-3 */ -static const u8 VIA686A_REG_TEMP[] = { 0x20, 0x21, 0x1f }; -static const u8 VIA686A_REG_TEMP_OVER[] = { 0x39, 0x3d, 0x1d }; -static const u8 VIA686A_REG_TEMP_HYST[] = { 0x3a, 0x3e, 0x1e }; -/* bits 7-6 */ -#define VIA686A_REG_TEMP_LOW1 0x4b -/* 2 = bits 5-4, 3 = bits 7-6 */ -#define VIA686A_REG_TEMP_LOW23 0x49 - -#define VIA686A_REG_ALARM1 0x41 -#define VIA686A_REG_ALARM2 0x42 -#define VIA686A_REG_FANDIV 0x47 -#define VIA686A_REG_CONFIG 0x40 -/* The following register sets temp interrupt mode (bits 1-0 for temp1, - 3-2 for temp2, 5-4 for temp3). Modes are: - 00 interrupt stays as long as value is out-of-range - 01 interrupt is cleared once register is read (default) - 10 comparator mode- like 00, but ignores hysteresis - 11 same as 00 */ -#define VIA686A_REG_TEMP_MODE 0x4b -/* We'll just assume that you want to set all 3 simultaneously: */ -#define VIA686A_TEMP_MODE_MASK 0x3F -#define VIA686A_TEMP_MODE_CONTINUOUS 0x00 - -/* Conversions. Limit checking is only done on the TO_REG - variants. - -********* VOLTAGE CONVERSIONS (Bob Dougherty) ******** - From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew): - voltagefactor[0]=1.25/2628; (2628/1.25=2102.4) // Vccp - voltagefactor[1]=1.25/2628; (2628/1.25=2102.4) // +2.5V - voltagefactor[2]=1.67/2628; (2628/1.67=1573.7) // +3.3V - voltagefactor[3]=2.6/2628; (2628/2.60=1010.8) // +5V - voltagefactor[4]=6.3/2628; (2628/6.30=417.14) // +12V - in[i]=(data[i+2]*25.0+133)*voltagefactor[i]; - That is: - volts = (25*regVal+133)*factor - regVal = (volts/factor-133)/25 - (These conversions were contributed by Jonathan Teh Soon Yew - <j.teh@iname.com>) */ -static inline u8 IN_TO_REG(long val, int inNum) -{ - /* To avoid floating point, we multiply constants by 10 (100 for +12V). - Rounding is done (120500 is actually 133000 - 12500). - Remember that val is expressed in 0.001V/bit, which is why we divide - by an additional 10000 (100000 for +12V): 1000 for val and 10 (100) - for the constants. */ - if (inNum <= 1) - return (u8) - SENSORS_LIMIT((val * 21024 - 1205000) / 250000, 0, 255); - else if (inNum == 2) - return (u8) - SENSORS_LIMIT((val * 15737 - 1205000) / 250000, 0, 255); - else if (inNum == 3) - return (u8) - SENSORS_LIMIT((val * 10108 - 1205000) / 250000, 0, 255); - else - return (u8) - SENSORS_LIMIT((val * 41714 - 12050000) / 2500000, 0, 255); -} - -static inline long IN_FROM_REG(u8 val, int inNum) -{ - /* To avoid floating point, we multiply constants by 10 (100 for +12V). - We also multiply them by 1000 because we want 0.001V/bit for the - output value. Rounding is done. */ - if (inNum <= 1) - return (long) ((250000 * val + 1330000 + 21024 / 2) / 21024); - else if (inNum == 2) - return (long) ((250000 * val + 1330000 + 15737 / 2) / 15737); - else if (inNum == 3) - return (long) ((250000 * val + 1330000 + 10108 / 2) / 10108); - else - return (long) ((2500000 * val + 13300000 + 41714 / 2) / 41714); -} - -/********* FAN RPM CONVERSIONS ********/ -/* Higher register values = slower fans (the fan's strobe gates a counter). - But this chip saturates back at 0, not at 255 like all the other chips. - So, 0 means 0 RPM */ -static inline u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm == 0) - return 0; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255); -} - -#define FAN_FROM_REG(val,div) ((val)==0?0:(val)==255?0:1350000/((val)*(div))) - -/******** TEMP CONVERSIONS (Bob Dougherty) *********/ -/* linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew) - if(temp<169) - return double(temp)*0.427-32.08; - else if(temp>=169 && temp<=202) - return double(temp)*0.582-58.16; - else - return double(temp)*0.924-127.33; - - A fifth-order polynomial fits the unofficial data (provided by Alex van - Kaam <darkside@chello.nl>) a bit better. It also give more reasonable - numbers on my machine (ie. they agree with what my BIOS tells me). - Here's the fifth-order fit to the 8-bit data: - temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 - - 2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0. - - (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for - finding my typos in this formula!) - - Alas, none of the elegant function-fit solutions will work because we - aren't allowed to use floating point in the kernel and doing it with - integers doesn't provide enough precision. So we'll do boring old - look-up table stuff. The unofficial data (see below) have effectively - 7-bit resolution (they are rounded to the nearest degree). I'm assuming - that the transfer function of the device is monotonic and smooth, so a - smooth function fit to the data will allow us to get better precision. - I used the 5th-order poly fit described above and solved for - VIA register values 0-255. I *10 before rounding, so we get tenth-degree - precision. (I could have done all 1024 values for our 10-bit readings, - but the function is very linear in the useful range (0-80 deg C), so - we'll just use linear interpolation for 10-bit readings.) So, tempLUT - is the temp at via register values 0-255: */ -static const long tempLUT[] = -{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519, - -503, -487, -471, -456, -442, -428, -414, -400, -387, -375, - -362, -350, -339, -327, -316, -305, -295, -285, -275, -265, - -255, -246, -237, -229, -220, -212, -204, -196, -188, -180, - -173, -166, -159, -152, -145, -139, -132, -126, -120, -114, - -108, -102, -96, -91, -85, -80, -74, -69, -64, -59, -54, -49, - -44, -39, -34, -29, -25, -20, -15, -11, -6, -2, 3, 7, 12, 16, - 20, 25, 29, 33, 37, 42, 46, 50, 54, 59, 63, 67, 71, 75, 79, 84, - 88, 92, 96, 100, 104, 109, 113, 117, 121, 125, 130, 134, 138, - 142, 146, 151, 155, 159, 163, 168, 172, 176, 181, 185, 189, - 193, 198, 202, 206, 211, 215, 219, 224, 228, 232, 237, 241, - 245, 250, 254, 259, 263, 267, 272, 276, 281, 285, 290, 294, - 299, 303, 307, 312, 316, 321, 325, 330, 334, 339, 344, 348, - 353, 357, 362, 366, 371, 376, 380, 385, 390, 395, 399, 404, - 409, 414, 419, 423, 428, 433, 438, 443, 449, 454, 459, 464, - 469, 475, 480, 486, 491, 497, 502, 508, 514, 520, 526, 532, - 538, 544, 551, 557, 564, 571, 578, 584, 592, 599, 606, 614, - 621, 629, 637, 645, 654, 662, 671, 680, 689, 698, 708, 718, - 728, 738, 749, 759, 770, 782, 793, 805, 818, 830, 843, 856, - 870, 883, 898, 912, 927, 943, 958, 975, 991, 1008, 1026, 1044, - 1062, 1081, 1101, 1121, 1141, 1162, 1184, 1206, 1229, 1252, - 1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462 -}; - -/* the original LUT values from Alex van Kaam <darkside@chello.nl> - (for via register values 12-240): -{-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31, --30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15, --15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3, --3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12, -12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22, -22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33, -33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45, -45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60, -61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84, -85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110}; - - - Here's the reverse LUT. I got it by doing a 6-th order poly fit (needed - an extra term for a good fit to these inverse data!) and then - solving for each temp value from -50 to 110 (the useable range for - this chip). Here's the fit: - viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4 - - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01) - Note that n=161: */ -static const u8 viaLUT[] = -{ 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23, - 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40, - 41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66, - 69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100, - 103, 105, 107, 110, 112, 115, 117, 119, 122, 124, 126, 129, - 131, 134, 136, 138, 140, 143, 145, 147, 150, 152, 154, 156, - 158, 160, 162, 164, 166, 168, 170, 172, 174, 176, 178, 180, - 182, 183, 185, 187, 188, 190, 192, 193, 195, 196, 198, 199, - 200, 202, 203, 205, 206, 207, 208, 209, 210, 211, 212, 213, - 214, 215, 216, 217, 218, 219, 220, 221, 222, 222, 223, 224, - 225, 226, 226, 227, 228, 228, 229, 230, 230, 231, 232, 232, - 233, 233, 234, 235, 235, 236, 236, 237, 237, 238, 238, 239, - 239, 240 -}; - -/* Converting temps to (8-bit) hyst and over registers - No interpolation here. - The +50 is because the temps start at -50 */ -static inline u8 TEMP_TO_REG(long val) -{ - return viaLUT[val <= -50000 ? 0 : val >= 110000 ? 160 : - (val < 0 ? val - 500 : val + 500) / 1000 + 50]; -} - -/* for 8-bit temperature hyst and over registers */ -#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100) - -/* for 10-bit temperature readings */ -static inline long TEMP_FROM_REG10(u16 val) -{ - u16 eightBits = val >> 2; - u16 twoBits = val & 3; - - /* no interpolation for these */ - if (twoBits == 0 || eightBits == 255) - return TEMP_FROM_REG(eightBits); - - /* do some linear interpolation */ - return (tempLUT[eightBits] * (4 - twoBits) + - tempLUT[eightBits + 1] * twoBits) * 25; -} - -#define DIV_FROM_REG(val) (1 << (val)) -#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1) - -/* For the VIA686A, we need to keep some data in memory. - The structure is dynamically allocated, at the same time when a new - via686a client is allocated. */ -struct via686a_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 in[5]; /* Register value */ - u8 in_max[5]; /* Register value */ - u8 in_min[5]; /* Register value */ - u8 fan[2]; /* Register value */ - u8 fan_min[2]; /* Register value */ - u16 temp[3]; /* Register value 10 bit */ - u8 temp_over[3]; /* Register value */ - u8 temp_hyst[3]; /* Register value */ - u8 fan_div[2]; /* Register encoding, shifted right */ - u16 alarms; /* Register encoding, combined */ -}; - -static struct pci_dev *s_bridge; /* pointer to the (only) via686a */ - -static int via686a_attach_adapter(struct i2c_adapter *adapter); -static int via686a_detect(struct i2c_adapter *adapter, int address, int kind); -static int via686a_detach_client(struct i2c_client *client); - -static inline int via686a_read_value(struct i2c_client *client, u8 reg) -{ - return (inb_p(client->addr + reg)); -} - -static inline void via686a_write_value(struct i2c_client *client, u8 reg, - u8 value) -{ - outb_p(value, client->addr + reg); -} - -static struct via686a_data *via686a_update_device(struct device *dev); -static void via686a_init_client(struct i2c_client *client); - -/* following are the sysfs callback functions */ - -/* 7 voltage sensors */ -static ssize_t show_in(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%ld\n", IN_FROM_REG(data->in[nr], nr)); -} - -static ssize_t show_in_min(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_min[nr], nr)); -} - -static ssize_t show_in_max(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%ld\n", IN_FROM_REG(data->in_max[nr], nr)); -} - -static ssize_t set_in_min(struct device *dev, const char *buf, - size_t count, int nr) { - struct i2c_client *client = to_i2c_client(dev); - struct via686a_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_min[nr] = IN_TO_REG(val, nr); - via686a_write_value(client, VIA686A_REG_IN_MIN(nr), - data->in_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_in_max(struct device *dev, const char *buf, - size_t count, int nr) { - struct i2c_client *client = to_i2c_client(dev); - struct via686a_data *data = i2c_get_clientdata(client); - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->in_max[nr] = IN_TO_REG(val, nr); - via686a_write_value(client, VIA686A_REG_IN_MAX(nr), - data->in_max[nr]); - up(&data->update_lock); - return count; -} -#define show_in_offset(offset) \ -static ssize_t \ - show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static ssize_t \ - show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_min(dev, buf, offset); \ -} \ -static ssize_t \ - show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_max(dev, buf, offset); \ -} \ -static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_min(dev, buf, count, offset); \ -} \ -static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_in_max(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in##offset, NULL);\ -static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ - show_in##offset##_min, set_in##offset##_min); \ -static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ - show_in##offset##_max, set_in##offset##_max); - -show_in_offset(0); -show_in_offset(1); -show_in_offset(2); -show_in_offset(3); -show_in_offset(4); - -/* 3 temperatures */ -static ssize_t show_temp(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%ld\n", TEMP_FROM_REG10(data->temp[nr])); -} -static ssize_t show_temp_over(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_over[nr])); -} -static ssize_t show_temp_hyst(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp_hyst[nr])); -} -static ssize_t set_temp_over(struct device *dev, const char *buf, - size_t count, int nr) { - struct i2c_client *client = to_i2c_client(dev); - struct via686a_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_over[nr] = TEMP_TO_REG(val); - via686a_write_value(client, VIA686A_REG_TEMP_OVER[nr], - data->temp_over[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_temp_hyst(struct device *dev, const char *buf, - size_t count, int nr) { - struct i2c_client *client = to_i2c_client(dev); - struct via686a_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->temp_hyst[nr] = TEMP_TO_REG(val); - via686a_write_value(client, VIA686A_REG_TEMP_HYST[nr], - data->temp_hyst[nr]); - up(&data->update_lock); - return count; -} -#define show_temp_offset(offset) \ -static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, offset - 1); \ -} \ -static ssize_t \ -show_temp_##offset##_over (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_over(dev, buf, offset - 1); \ -} \ -static ssize_t \ -show_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_hyst(dev, buf, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_over (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_over(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_temp_##offset##_hyst (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_temp_hyst(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL);\ -static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_over, set_temp_##offset##_over); \ -static DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \ - show_temp_##offset##_hyst, set_temp_##offset##_hyst); - -show_temp_offset(1); -show_temp_offset(2); -show_temp_offset(3); - -/* 2 Fans */ -static ssize_t show_fan(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], - DIV_FROM_REG(data->fan_div[nr])) ); -} -static ssize_t show_fan_min(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%d\n", - FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) ); -} -static ssize_t show_fan_div(struct device *dev, char *buf, int nr) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) ); -} -static ssize_t set_fan_min(struct device *dev, const char *buf, - size_t count, int nr) { - struct i2c_client *client = to_i2c_client(dev); - struct via686a_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); - via686a_write_value(client, VIA686A_REG_FAN_MIN(nr+1), data->fan_min[nr]); - up(&data->update_lock); - return count; -} -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) { - struct i2c_client *client = to_i2c_client(dev); - struct via686a_data *data = i2c_get_clientdata(client); - int val = simple_strtol(buf, NULL, 10); - int old; - - down(&data->update_lock); - old = via686a_read_value(client, VIA686A_REG_FANDIV); - data->fan_div[nr] = DIV_TO_REG(val); - old = (old & 0x0f) | (data->fan_div[1] << 6) | (data->fan_div[0] << 4); - via686a_write_value(client, VIA686A_REG_FANDIV, old); - up(&data->update_lock); - return count; -} - -#define show_fan_offset(offset) \ -static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset - 1); \ -} \ -static ssize_t show_fan_##offset##_div (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_min(dev, buf, count, offset - 1); \ -} \ -static ssize_t set_fan_##offset##_div (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return set_fan_div(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL);\ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_min, set_fan_##offset##_min); \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_fan_##offset##_div, set_fan_##offset##_div); - -show_fan_offset(1); -show_fan_offset(2); - -/* Alarms */ -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) { - struct via686a_data *data = via686a_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* The driver. I choose to use type i2c_driver, as at is identical to both - smbus_driver and isa_driver, and clients could be of either kind */ -static struct i2c_driver via686a_driver = { - .owner = THIS_MODULE, - .name = "via686a", - .id = I2C_DRIVERID_VIA686A, - .flags = I2C_DF_NOTIFY, - .attach_adapter = via686a_attach_adapter, - .detach_client = via686a_detach_client, -}; - - -/* This is called when the module is loaded */ -static int via686a_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, via686a_detect); -} - -static int via686a_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct via686a_data *data; - int err = 0; - const char client_name[] = "via686a"; - u16 val; - - /* Make sure we are probing the ISA bus!! */ - if (!i2c_is_isa_adapter(adapter)) { - dev_err(&adapter->dev, - "via686a_detect called for an I2C bus adapter?!?\n"); - return 0; - } - - /* 8231 requires multiple of 256, we enforce that on 686 as well */ - if (force_addr) - address = force_addr & 0xFF00; - - if (force_addr) { - dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n", - address); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(s_bridge, VIA686A_BASE_REG, address)) - return -ENODEV; - } - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val)) - return -ENODEV; - if (!(val & 0x0001)) { - dev_warn(&adapter->dev, "enabling sensors\n"); - if (PCIBIOS_SUCCESSFUL != - pci_write_config_word(s_bridge, VIA686A_ENABLE_REG, - val | 0x0001)) - return -ENODEV; - } - - /* Reserve the ISA region */ - if (!request_region(address, VIA686A_EXTENT, via686a_driver.name)) { - dev_err(&adapter->dev, "region 0x%x already in use!\n", - address); - return -ENODEV; - } - - if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR0; - } - memset(data, 0, sizeof(struct via686a_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &via686a_driver; - new_client->flags = 0; - - /* Fill in the remaining client fields and put into the global list */ - strlcpy(new_client->name, client_name, I2C_NAME_SIZE); - - data->valid = 0; - init_MUTEX(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR3; - - /* Initialize the VIA686A chip */ - via686a_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_temp3_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp3_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp2_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp3_max_hyst); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -ERROR3: - kfree(data); -ERROR0: - release_region(address, VIA686A_EXTENT); - return err; -} - -static int via686a_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - release_region(client->addr, VIA686A_EXTENT); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -/* Called when we have found a new VIA686A. Set limits, etc. */ -static void via686a_init_client(struct i2c_client *client) -{ - u8 reg; - - /* Start monitoring */ - reg = via686a_read_value(client, VIA686A_REG_CONFIG); - via686a_write_value(client, VIA686A_REG_CONFIG, (reg|0x01)&0x7F); - - /* Configure temp interrupt mode for continuous-interrupt operation */ - via686a_write_value(client, VIA686A_REG_TEMP_MODE, - via686a_read_value(client, VIA686A_REG_TEMP_MODE) & - !(VIA686A_TEMP_MODE_MASK | VIA686A_TEMP_MODE_CONTINUOUS)); -} - -static struct via686a_data *via686a_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct via686a_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - for (i = 0; i <= 4; i++) { - data->in[i] = - via686a_read_value(client, VIA686A_REG_IN(i)); - data->in_min[i] = via686a_read_value(client, - VIA686A_REG_IN_MIN - (i)); - data->in_max[i] = - via686a_read_value(client, VIA686A_REG_IN_MAX(i)); - } - for (i = 1; i <= 2; i++) { - data->fan[i - 1] = - via686a_read_value(client, VIA686A_REG_FAN(i)); - data->fan_min[i - 1] = via686a_read_value(client, - VIA686A_REG_FAN_MIN(i)); - } - for (i = 0; i <= 2; i++) { - data->temp[i] = via686a_read_value(client, - VIA686A_REG_TEMP[i]) << 2; - data->temp_over[i] = - via686a_read_value(client, - VIA686A_REG_TEMP_OVER[i]); - data->temp_hyst[i] = - via686a_read_value(client, - VIA686A_REG_TEMP_HYST[i]); - } - /* add in lower 2 bits - temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1 - temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23 - temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23 - */ - data->temp[0] |= (via686a_read_value(client, - VIA686A_REG_TEMP_LOW1) - & 0xc0) >> 6; - data->temp[1] |= - (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) & - 0x30) >> 4; - data->temp[2] |= - (via686a_read_value(client, VIA686A_REG_TEMP_LOW23) & - 0xc0) >> 6; - - i = via686a_read_value(client, VIA686A_REG_FANDIV); - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = i >> 6; - data->alarms = - via686a_read_value(client, - VIA686A_REG_ALARM1) | - (via686a_read_value(client, VIA686A_REG_ALARM2) << 8); - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static struct pci_device_id via686a_pci_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, via686a_pci_ids); - -static int __devinit via686a_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - u16 val; - int addr = 0; - - if (PCIBIOS_SUCCESSFUL != - pci_read_config_word(dev, VIA686A_BASE_REG, &val)) - return -ENODEV; - - addr = val & ~(VIA686A_EXTENT - 1); - if (addr == 0 && force_addr == 0) { - dev_err(&dev->dev, "base address not set - upgrade BIOS " - "or use force_addr=0xaddr\n"); - return -ENODEV; - } - if (force_addr) - addr = force_addr; /* so detect will get called */ - - if (!addr) { - dev_err(&dev->dev, "No Via 686A sensors found.\n"); - return -ENODEV; - } - normal_isa[0] = addr; - - s_bridge = pci_dev_get(dev); - if (i2c_add_driver(&via686a_driver)) { - pci_dev_put(s_bridge); - s_bridge = NULL; - } - - /* Always return failure here. This is to allow other drivers to bind - * to this pci device. We don't really want to have control over the - * pci device, we only wanted to read as few register values from it. - */ - return -ENODEV; -} - -static struct pci_driver via686a_pci_driver = { - .name = "via686a", - .id_table = via686a_pci_ids, - .probe = via686a_pci_probe, -}; - -static int __init sm_via686a_init(void) -{ - return pci_register_driver(&via686a_pci_driver); -} - -static void __exit sm_via686a_exit(void) -{ - pci_unregister_driver(&via686a_pci_driver); - if (s_bridge != NULL) { - i2c_del_driver(&via686a_driver); - pci_dev_put(s_bridge); - s_bridge = NULL; - } -} - -MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>, " - "Mark Studebaker <mdsxyz123@yahoo.com> " - "and Bob Dougherty <bobd@stanford.edu>"); -MODULE_DESCRIPTION("VIA 686A Sensor device"); -MODULE_LICENSE("GPL"); - -module_init(sm_via686a_init); -module_exit(sm_via686a_exit); diff --git a/drivers/i2c/chips/w83627ehf.c b/drivers/i2c/chips/w83627ehf.c deleted file mode 100644 index 8a40b6976e1a..000000000000 --- a/drivers/i2c/chips/w83627ehf.c +++ /dev/null @@ -1,846 +0,0 @@ -/* - w83627ehf - Driver for the hardware monitoring functionality of - the Winbond W83627EHF Super-I/O chip - Copyright (C) 2005 Jean Delvare <khali@linux-fr.org> - - Shamelessly ripped from the w83627hf driver - Copyright (C) 2003 Mark Studebaker - - Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help - in testing and debugging this driver. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - - Supports the following chips: - - Chip #vin #fan #pwm #temp chip_id man_id - w83627ehf - 5 - 3 0x88 0x5ca3 - - This is a preliminary version of the driver, only supporting the - fan and temperature inputs. The chip does much more than that. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <asm/io.h> -#include "lm75.h" - -/* Addresses to scan - The actual ISA address is read from Super-I/O configuration space */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(w83627ehf); - -/* - * Super-I/O constants and functions - */ - -static int REG; /* The register to read/write */ -static int VAL; /* The value to read/write */ - -#define W83627EHF_LD_HWM 0x0b - -#define SIO_REG_LDSEL 0x07 /* Logical device select */ -#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ -#define SIO_REG_ENABLE 0x30 /* Logical device enable */ -#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */ - -#define SIO_W83627EHF_ID 0x8840 -#define SIO_ID_MASK 0xFFC0 - -static inline void -superio_outb(int reg, int val) -{ - outb(reg, REG); - outb(val, VAL); -} - -static inline int -superio_inb(int reg) -{ - outb(reg, REG); - return inb(VAL); -} - -static inline void -superio_select(int ld) -{ - outb(SIO_REG_LDSEL, REG); - outb(ld, VAL); -} - -static inline void -superio_enter(void) -{ - outb(0x87, REG); - outb(0x87, REG); -} - -static inline void -superio_exit(void) -{ - outb(0x02, REG); - outb(0x02, VAL); -} - -/* - * ISA constants - */ - -#define REGION_LENGTH 8 -#define ADDR_REG_OFFSET 5 -#define DATA_REG_OFFSET 6 - -#define W83627EHF_REG_BANK 0x4E -#define W83627EHF_REG_CONFIG 0x40 -#define W83627EHF_REG_CHIP_ID 0x49 -#define W83627EHF_REG_MAN_ID 0x4F - -static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 }; -static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c }; - -#define W83627EHF_REG_TEMP1 0x27 -#define W83627EHF_REG_TEMP1_HYST 0x3a -#define W83627EHF_REG_TEMP1_OVER 0x39 -static const u16 W83627EHF_REG_TEMP[] = { 0x150, 0x250 }; -static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x153, 0x253 }; -static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x155, 0x255 }; -static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 }; - -/* Fan clock dividers are spread over the following five registers */ -#define W83627EHF_REG_FANDIV1 0x47 -#define W83627EHF_REG_FANDIV2 0x4B -#define W83627EHF_REG_VBAT 0x5D -#define W83627EHF_REG_DIODE 0x59 -#define W83627EHF_REG_SMI_OVT 0x4C - -/* - * Conversions - */ - -static inline unsigned int -fan_from_reg(u8 reg, unsigned int div) -{ - if (reg == 0 || reg == 255) - return 0; - return 1350000U / (reg * div); -} - -static inline unsigned int -div_from_reg(u8 reg) -{ - return 1 << reg; -} - -static inline int -temp1_from_reg(s8 reg) -{ - return reg * 1000; -} - -static inline s8 -temp1_to_reg(int temp) -{ - if (temp <= -128000) - return -128; - if (temp >= 127000) - return 127; - if (temp < 0) - return (temp - 500) / 1000; - return (temp + 500) / 1000; -} - -/* - * Data structures and manipulation thereof - */ - -struct w83627ehf_data { - struct i2c_client client; - struct semaphore lock; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - /* Register values */ - u8 fan[5]; - u8 fan_min[5]; - u8 fan_div[5]; - u8 has_fan; /* some fan inputs can be disabled */ - s8 temp1; - s8 temp1_max; - s8 temp1_max_hyst; - s16 temp[2]; - s16 temp_max[2]; - s16 temp_max_hyst[2]; -}; - -static inline int is_word_sized(u16 reg) -{ - return (((reg & 0xff00) == 0x100 - || (reg & 0xff00) == 0x200) - && ((reg & 0x00ff) == 0x50 - || (reg & 0x00ff) == 0x53 - || (reg & 0x00ff) == 0x55)); -} - -/* We assume that the default bank is 0, thus the following two functions do - nothing for registers which live in bank 0. For others, they respectively - set the bank register to the correct value (before the register is - accessed), and back to 0 (afterwards). */ -static inline void w83627ehf_set_bank(struct i2c_client *client, u16 reg) -{ - if (reg & 0xff00) { - outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET); - outb_p(reg >> 8, client->addr + DATA_REG_OFFSET); - } -} - -static inline void w83627ehf_reset_bank(struct i2c_client *client, u16 reg) -{ - if (reg & 0xff00) { - outb_p(W83627EHF_REG_BANK, client->addr + ADDR_REG_OFFSET); - outb_p(0, client->addr + DATA_REG_OFFSET); - } -} - -static u16 w83627ehf_read_value(struct i2c_client *client, u16 reg) -{ - struct w83627ehf_data *data = i2c_get_clientdata(client); - int res, word_sized = is_word_sized(reg); - - down(&data->lock); - - w83627ehf_set_bank(client, reg); - outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); - res = inb_p(client->addr + DATA_REG_OFFSET); - if (word_sized) { - outb_p((reg & 0xff) + 1, - client->addr + ADDR_REG_OFFSET); - res = (res << 8) + inb_p(client->addr + DATA_REG_OFFSET); - } - w83627ehf_reset_bank(client, reg); - - up(&data->lock); - - return res; -} - -static int w83627ehf_write_value(struct i2c_client *client, u16 reg, u16 value) -{ - struct w83627ehf_data *data = i2c_get_clientdata(client); - int word_sized = is_word_sized(reg); - - down(&data->lock); - - w83627ehf_set_bank(client, reg); - outb_p(reg & 0xff, client->addr + ADDR_REG_OFFSET); - if (word_sized) { - outb_p(value >> 8, client->addr + DATA_REG_OFFSET); - outb_p((reg & 0xff) + 1, - client->addr + ADDR_REG_OFFSET); - } - outb_p(value & 0xff, client->addr + DATA_REG_OFFSET); - w83627ehf_reset_bank(client, reg); - - up(&data->lock); - return 0; -} - -/* This function assumes that the caller holds data->update_lock */ -static void w83627ehf_write_fan_div(struct i2c_client *client, int nr) -{ - struct w83627ehf_data *data = i2c_get_clientdata(client); - u8 reg; - - switch (nr) { - case 0: - reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0xcf) - | ((data->fan_div[0] & 0x03) << 4); - w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xdf) - | ((data->fan_div[0] & 0x04) << 3); - w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); - break; - case 1: - reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV1) & 0x3f) - | ((data->fan_div[1] & 0x03) << 6); - w83627ehf_write_value(client, W83627EHF_REG_FANDIV1, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0xbf) - | ((data->fan_div[1] & 0x04) << 4); - w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); - break; - case 2: - reg = (w83627ehf_read_value(client, W83627EHF_REG_FANDIV2) & 0x3f) - | ((data->fan_div[2] & 0x03) << 6); - w83627ehf_write_value(client, W83627EHF_REG_FANDIV2, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_VBAT) & 0x7f) - | ((data->fan_div[2] & 0x04) << 5); - w83627ehf_write_value(client, W83627EHF_REG_VBAT, reg); - break; - case 3: - reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0xfc) - | (data->fan_div[3] & 0x03); - w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg); - reg = (w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT) & 0x7f) - | ((data->fan_div[3] & 0x04) << 5); - w83627ehf_write_value(client, W83627EHF_REG_SMI_OVT, reg); - break; - case 4: - reg = (w83627ehf_read_value(client, W83627EHF_REG_DIODE) & 0x73) - | ((data->fan_div[4] & 0x03) << 3) - | ((data->fan_div[4] & 0x04) << 5); - w83627ehf_write_value(client, W83627EHF_REG_DIODE, reg); - break; - } -} - -static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ) - || !data->valid) { - /* Fan clock dividers */ - i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = (i >> 6) & 0x03; - i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV2); - data->fan_div[2] = (i >> 6) & 0x03; - i = w83627ehf_read_value(client, W83627EHF_REG_VBAT); - data->fan_div[0] |= (i >> 3) & 0x04; - data->fan_div[1] |= (i >> 4) & 0x04; - data->fan_div[2] |= (i >> 5) & 0x04; - if (data->has_fan & ((1 << 3) | (1 << 4))) { - i = w83627ehf_read_value(client, W83627EHF_REG_DIODE); - data->fan_div[3] = i & 0x03; - data->fan_div[4] = ((i >> 2) & 0x03) - | ((i >> 5) & 0x04); - } - if (data->has_fan & (1 << 3)) { - i = w83627ehf_read_value(client, W83627EHF_REG_SMI_OVT); - data->fan_div[3] |= (i >> 5) & 0x04; - } - - /* Measured fan speeds and limits */ - for (i = 0; i < 5; i++) { - if (!(data->has_fan & (1 << i))) - continue; - - data->fan[i] = w83627ehf_read_value(client, - W83627EHF_REG_FAN[i]); - data->fan_min[i] = w83627ehf_read_value(client, - W83627EHF_REG_FAN_MIN[i]); - - /* If we failed to measure the fan speed and clock - divider can be increased, let's try that for next - time */ - if (data->fan[i] == 0xff - && data->fan_div[i] < 0x07) { - dev_dbg(&client->dev, "Increasing fan %d " - "clock divider from %u to %u\n", - i, div_from_reg(data->fan_div[i]), - div_from_reg(data->fan_div[i] + 1)); - data->fan_div[i]++; - w83627ehf_write_fan_div(client, i); - /* Preserve min limit if possible */ - if (data->fan_min[i] >= 2 - && data->fan_min[i] != 255) - w83627ehf_write_value(client, - W83627EHF_REG_FAN_MIN[i], - (data->fan_min[i] /= 2)); - } - } - - /* Measured temperatures and limits */ - data->temp1 = w83627ehf_read_value(client, - W83627EHF_REG_TEMP1); - data->temp1_max = w83627ehf_read_value(client, - W83627EHF_REG_TEMP1_OVER); - data->temp1_max_hyst = w83627ehf_read_value(client, - W83627EHF_REG_TEMP1_HYST); - for (i = 0; i < 2; i++) { - data->temp[i] = w83627ehf_read_value(client, - W83627EHF_REG_TEMP[i]); - data->temp_max[i] = w83627ehf_read_value(client, - W83627EHF_REG_TEMP_OVER[i]); - data->temp_max_hyst[i] = w83627ehf_read_value(client, - W83627EHF_REG_TEMP_HYST[i]); - } - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - return data; -} - -/* - * Sysfs callback functions - */ - -#define show_fan_reg(reg) \ -static ssize_t \ -show_##reg(struct device *dev, char *buf, int nr) \ -{ \ - struct w83627ehf_data *data = w83627ehf_update_device(dev); \ - return sprintf(buf, "%d\n", \ - fan_from_reg(data->reg[nr], \ - div_from_reg(data->fan_div[nr]))); \ -} -show_fan_reg(fan); -show_fan_reg(fan_min); - -static ssize_t -show_fan_div(struct device *dev, char *buf, int nr) -{ - struct w83627ehf_data *data = w83627ehf_update_device(dev); - return sprintf(buf, "%u\n", - div_from_reg(data->fan_div[nr])); -} - -static ssize_t -store_fan_min(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627ehf_data *data = i2c_get_clientdata(client); - unsigned int val = simple_strtoul(buf, NULL, 10); - unsigned int reg; - u8 new_div; - - down(&data->update_lock); - if (!val) { - /* No min limit, alarm disabled */ - data->fan_min[nr] = 255; - new_div = data->fan_div[nr]; /* No change */ - dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1); - } else if ((reg = 1350000U / val) >= 128 * 255) { - /* Speed below this value cannot possibly be represented, - even with the highest divider (128) */ - data->fan_min[nr] = 254; - new_div = 7; /* 128 == (1 << 7) */ - dev_warn(dev, "fan%u low limit %u below minimum %u, set to " - "minimum\n", nr + 1, val, fan_from_reg(254, 128)); - } else if (!reg) { - /* Speed above this value cannot possibly be represented, - even with the lowest divider (1) */ - data->fan_min[nr] = 1; - new_div = 0; /* 1 == (1 << 0) */ - dev_warn(dev, "fan%u low limit %u above maximum %u, set to " - "maximum\n", nr + 1, val, fan_from_reg(1, 1)); - } else { - /* Automatically pick the best divider, i.e. the one such - that the min limit will correspond to a register value - in the 96..192 range */ - new_div = 0; - while (reg > 192 && new_div < 7) { - reg >>= 1; - new_div++; - } - data->fan_min[nr] = reg; - } - - /* Write both the fan clock divider (if it changed) and the new - fan min (unconditionally) */ - if (new_div != data->fan_div[nr]) { - if (new_div > data->fan_div[nr]) - data->fan[nr] >>= (data->fan_div[nr] - new_div); - else - data->fan[nr] <<= (new_div - data->fan_div[nr]); - - dev_dbg(dev, "fan%u clock divider changed from %u to %u\n", - nr + 1, div_from_reg(data->fan_div[nr]), - div_from_reg(new_div)); - data->fan_div[nr] = new_div; - w83627ehf_write_fan_div(client, nr); - } - w83627ehf_write_value(client, W83627EHF_REG_FAN_MIN[nr], - data->fan_min[nr]); - up(&data->update_lock); - - return count; -} - -#define sysfs_fan_offset(offset) \ -static ssize_t \ -show_reg_fan_##offset(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_fan(dev, buf, offset-1); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ - show_reg_fan_##offset, NULL); - -#define sysfs_fan_min_offset(offset) \ -static ssize_t \ -show_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_fan_min(dev, buf, offset-1); \ -} \ -static ssize_t \ -store_reg_fan##offset##_min(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_fan_min(dev, buf, count, offset-1); \ -} \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_reg_fan##offset##_min, \ - store_reg_fan##offset##_min); - -#define sysfs_fan_div_offset(offset) \ -static ssize_t \ -show_reg_fan##offset##_div(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_fan_div(dev, buf, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO, \ - show_reg_fan##offset##_div, NULL); - -sysfs_fan_offset(1); -sysfs_fan_min_offset(1); -sysfs_fan_div_offset(1); -sysfs_fan_offset(2); -sysfs_fan_min_offset(2); -sysfs_fan_div_offset(2); -sysfs_fan_offset(3); -sysfs_fan_min_offset(3); -sysfs_fan_div_offset(3); -sysfs_fan_offset(4); -sysfs_fan_min_offset(4); -sysfs_fan_div_offset(4); -sysfs_fan_offset(5); -sysfs_fan_min_offset(5); -sysfs_fan_div_offset(5); - -#define show_temp1_reg(reg) \ -static ssize_t \ -show_##reg(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - struct w83627ehf_data *data = w83627ehf_update_device(dev); \ - return sprintf(buf, "%d\n", temp1_from_reg(data->reg)); \ -} -show_temp1_reg(temp1); -show_temp1_reg(temp1_max); -show_temp1_reg(temp1_max_hyst); - -#define store_temp1_reg(REG, reg) \ -static ssize_t \ -store_temp1_##reg(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627ehf_data *data = i2c_get_clientdata(client); \ - u32 val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->temp1_##reg = temp1_to_reg(val); \ - w83627ehf_write_value(client, W83627EHF_REG_TEMP1_##REG, \ - data->temp1_##reg); \ - up(&data->update_lock); \ - return count; \ -} -store_temp1_reg(OVER, max); -store_temp1_reg(HYST, max_hyst); - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO| S_IWUSR, - show_temp1_max, store_temp1_max); -static DEVICE_ATTR(temp1_max_hyst, S_IRUGO| S_IWUSR, - show_temp1_max_hyst, store_temp1_max_hyst); - -#define show_temp_reg(reg) \ -static ssize_t \ -show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct w83627ehf_data *data = w83627ehf_update_device(dev); \ - return sprintf(buf, "%d\n", \ - LM75_TEMP_FROM_REG(data->reg[nr])); \ -} -show_temp_reg(temp); -show_temp_reg(temp_max); -show_temp_reg(temp_max_hyst); - -#define store_temp_reg(REG, reg) \ -static ssize_t \ -store_##reg (struct device *dev, const char *buf, size_t count, int nr) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627ehf_data *data = i2c_get_clientdata(client); \ - u32 val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->reg[nr] = LM75_TEMP_TO_REG(val); \ - w83627ehf_write_value(client, W83627EHF_REG_TEMP_##REG[nr], \ - data->reg[nr]); \ - up(&data->update_lock); \ - return count; \ -} -store_temp_reg(OVER, temp_max); -store_temp_reg(HYST, temp_max_hyst); - -#define sysfs_temp_offset(offset) \ -static ssize_t \ -show_reg_temp##offset (struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp(dev, buf, offset - 2); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ - show_reg_temp##offset, NULL); - -#define sysfs_temp_reg_offset(reg, offset) \ -static ssize_t \ -show_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \ - char *buf) \ -{ \ - return show_temp_##reg(dev, buf, offset - 2); \ -} \ -static ssize_t \ -store_reg_temp##offset##_##reg(struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_temp_##reg(dev, buf, count, offset - 2); \ -} \ -static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \ - show_reg_temp##offset##_##reg, \ - store_reg_temp##offset##_##reg); - -sysfs_temp_offset(2); -sysfs_temp_reg_offset(max, 2); -sysfs_temp_reg_offset(max_hyst, 2); -sysfs_temp_offset(3); -sysfs_temp_reg_offset(max, 3); -sysfs_temp_reg_offset(max_hyst, 3); - -/* - * Driver and client management - */ - -static struct i2c_driver w83627ehf_driver; - -static void w83627ehf_init_client(struct i2c_client *client) -{ - int i; - u8 tmp; - - /* Start monitoring is needed */ - tmp = w83627ehf_read_value(client, W83627EHF_REG_CONFIG); - if (!(tmp & 0x01)) - w83627ehf_write_value(client, W83627EHF_REG_CONFIG, - tmp | 0x01); - - /* Enable temp2 and temp3 if needed */ - for (i = 0; i < 2; i++) { - tmp = w83627ehf_read_value(client, - W83627EHF_REG_TEMP_CONFIG[i]); - if (tmp & 0x01) - w83627ehf_write_value(client, - W83627EHF_REG_TEMP_CONFIG[i], - tmp & 0xfe); - } -} - -static int w83627ehf_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct w83627ehf_data *data; - int i, err = 0; - - if (!i2c_is_isa_adapter(adapter)) - return 0; - - if (!request_region(address, REGION_LENGTH, w83627ehf_driver.name)) { - err = -EBUSY; - goto exit; - } - - if (!(data = kmalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit_release; - } - memset(data, 0, sizeof(struct w83627ehf_data)); - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - init_MUTEX(&data->lock); - client->adapter = adapter; - client->driver = &w83627ehf_driver; - client->flags = 0; - - strlcpy(client->name, "w83627ehf", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the i2c layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; - - /* Initialize the chip */ - w83627ehf_init_client(client); - - /* A few vars need to be filled upon startup */ - for (i = 0; i < 5; i++) - data->fan_min[i] = w83627ehf_read_value(client, - W83627EHF_REG_FAN_MIN[i]); - - /* It looks like fan4 and fan5 pins can be alternatively used - as fan on/off switches */ - data->has_fan = 0x07; /* fan1, fan2 and fan3 */ - i = w83627ehf_read_value(client, W83627EHF_REG_FANDIV1); - if (i & (1 << 2)) - data->has_fan |= (1 << 3); - if (i & (1 << 0)) - data->has_fan |= (1 << 4); - - /* Register sysfs hooks */ - device_create_file(&client->dev, &dev_attr_fan1_input); - device_create_file(&client->dev, &dev_attr_fan1_min); - device_create_file(&client->dev, &dev_attr_fan1_div); - device_create_file(&client->dev, &dev_attr_fan2_input); - device_create_file(&client->dev, &dev_attr_fan2_min); - device_create_file(&client->dev, &dev_attr_fan2_div); - device_create_file(&client->dev, &dev_attr_fan3_input); - device_create_file(&client->dev, &dev_attr_fan3_min); - device_create_file(&client->dev, &dev_attr_fan3_div); - - if (data->has_fan & (1 << 3)) { - device_create_file(&client->dev, &dev_attr_fan4_input); - device_create_file(&client->dev, &dev_attr_fan4_min); - device_create_file(&client->dev, &dev_attr_fan4_div); - } - if (data->has_fan & (1 << 4)) { - device_create_file(&client->dev, &dev_attr_fan5_input); - device_create_file(&client->dev, &dev_attr_fan5_min); - device_create_file(&client->dev, &dev_attr_fan5_div); - } - - device_create_file(&client->dev, &dev_attr_temp1_input); - device_create_file(&client->dev, &dev_attr_temp1_max); - device_create_file(&client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&client->dev, &dev_attr_temp2_input); - device_create_file(&client->dev, &dev_attr_temp2_max); - device_create_file(&client->dev, &dev_attr_temp2_max_hyst); - device_create_file(&client->dev, &dev_attr_temp3_input); - device_create_file(&client->dev, &dev_attr_temp3_max); - device_create_file(&client->dev, &dev_attr_temp3_max_hyst); - - return 0; - -exit_free: - kfree(data); -exit_release: - release_region(address, REGION_LENGTH); -exit: - return err; -} - -static int w83627ehf_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, w83627ehf_detect); -} - -static int w83627ehf_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - release_region(client->addr, REGION_LENGTH); - kfree(i2c_get_clientdata(client)); - - return 0; -} - -static struct i2c_driver w83627ehf_driver = { - .owner = THIS_MODULE, - .name = "w83627ehf", - .flags = I2C_DF_NOTIFY, - .attach_adapter = w83627ehf_attach_adapter, - .detach_client = w83627ehf_detach_client, -}; - -static int __init w83627ehf_find(int sioaddr, int *address) -{ - u16 val; - - REG = sioaddr; - VAL = sioaddr + 1; - superio_enter(); - - val = (superio_inb(SIO_REG_DEVID) << 8) - | superio_inb(SIO_REG_DEVID + 1); - if ((val & SIO_ID_MASK) != SIO_W83627EHF_ID) { - superio_exit(); - return -ENODEV; - } - - superio_select(W83627EHF_LD_HWM); - val = (superio_inb(SIO_REG_ADDR) << 8) - | superio_inb(SIO_REG_ADDR + 1); - *address = val & ~(REGION_LENGTH - 1); - if (*address == 0) { - superio_exit(); - return -ENODEV; - } - - /* Activate logical device if needed */ - val = superio_inb(SIO_REG_ENABLE); - if (!(val & 0x01)) - superio_outb(SIO_REG_ENABLE, val | 0x01); - - superio_exit(); - return 0; -} - -static int __init sensors_w83627ehf_init(void) -{ - if (w83627ehf_find(0x2e, &normal_isa[0]) - && w83627ehf_find(0x4e, &normal_isa[0])) - return -ENODEV; - - return i2c_add_driver(&w83627ehf_driver); -} - -static void __exit sensors_w83627ehf_exit(void) -{ - i2c_del_driver(&w83627ehf_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("W83627EHF driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_w83627ehf_init); -module_exit(sensors_w83627ehf_exit); diff --git a/drivers/i2c/chips/w83627hf.c b/drivers/i2c/chips/w83627hf.c deleted file mode 100644 index bd87a42e068a..000000000000 --- a/drivers/i2c/chips/w83627hf.c +++ /dev/null @@ -1,1511 +0,0 @@ -/* - w83627hf.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, - and Mark Studebaker <mdsxyz123@yahoo.com> - Ported to 2.6 by Bernhard C. Schrenk <clemy@clemy.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - Supports following chips: - - Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA - w83627hf 9 3 2 3 0x20 0x5ca3 no yes(LPC) - w83627thf 7 3 3 3 0x90 0x5ca3 no yes(LPC) - w83637hf 7 3 3 3 0x80 0x5ca3 no yes(LPC) - w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC) - - For other winbond chips, and for i2c support in the above chips, - use w83781d.c. - - Note: automatic ("cruise") fan control for 697, 637 & 627thf not - supported yet. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> -#include <asm/io.h> -#include "lm75.h" - -static u16 force_addr; -module_param(force_addr, ushort, 0); -MODULE_PARM_DESC(force_addr, - "Initialize the base address of the sensors"); -static u8 force_i2c = 0x1f; -module_param(force_i2c, byte, 0); -MODULE_PARM_DESC(force_i2c, - "Initialize the i2c address of the sensors"); - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_4(w83627hf, w83627thf, w83697hf, w83637hf); - -static int init = 1; -module_param(init, bool, 0); -MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); - -/* modified from kernel/include/traps.c */ -static int REG; /* The register to read/write */ -#define DEV 0x07 /* Register: Logical device select */ -static int VAL; /* The value to read/write */ - -/* logical device numbers for superio_select (below) */ -#define W83627HF_LD_FDC 0x00 -#define W83627HF_LD_PRT 0x01 -#define W83627HF_LD_UART1 0x02 -#define W83627HF_LD_UART2 0x03 -#define W83627HF_LD_KBC 0x05 -#define W83627HF_LD_CIR 0x06 /* w83627hf only */ -#define W83627HF_LD_GAME 0x07 -#define W83627HF_LD_MIDI 0x07 -#define W83627HF_LD_GPIO1 0x07 -#define W83627HF_LD_GPIO5 0x07 /* w83627thf only */ -#define W83627HF_LD_GPIO2 0x08 -#define W83627HF_LD_GPIO3 0x09 -#define W83627HF_LD_GPIO4 0x09 /* w83627thf only */ -#define W83627HF_LD_ACPI 0x0a -#define W83627HF_LD_HWM 0x0b - -#define DEVID 0x20 /* Register: Device ID */ - -#define W83627THF_GPIO5_EN 0x30 /* w83627thf only */ -#define W83627THF_GPIO5_IOSR 0xf3 /* w83627thf only */ -#define W83627THF_GPIO5_DR 0xf4 /* w83627thf only */ - -static inline void -superio_outb(int reg, int val) -{ - outb(reg, REG); - outb(val, VAL); -} - -static inline int -superio_inb(int reg) -{ - outb(reg, REG); - return inb(VAL); -} - -static inline void -superio_select(int ld) -{ - outb(DEV, REG); - outb(ld, VAL); -} - -static inline void -superio_enter(void) -{ - outb(0x87, REG); - outb(0x87, REG); -} - -static inline void -superio_exit(void) -{ - outb(0xAA, REG); -} - -#define W627_DEVID 0x52 -#define W627THF_DEVID 0x82 -#define W697_DEVID 0x60 -#define W637_DEVID 0x70 -#define WINB_ACT_REG 0x30 -#define WINB_BASE_REG 0x60 -/* Constants specified below */ - -/* Length of ISA address segment */ -#define WINB_EXTENT 8 - -/* Where are the ISA address/data registers relative to the base address */ -#define W83781D_ADDR_REG_OFFSET 5 -#define W83781D_DATA_REG_OFFSET 6 - -/* The W83781D registers */ -/* The W83782D registers for nr=7,8 are in bank 5 */ -#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ - (0x554 + (((nr) - 7) * 2))) -#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ - (0x555 + (((nr) - 7) * 2))) -#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ - (0x550 + (nr) - 7)) - -#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr)) -#define W83781D_REG_FAN(nr) (0x27 + (nr)) - -#define W83781D_REG_TEMP2_CONFIG 0x152 -#define W83781D_REG_TEMP3_CONFIG 0x252 -#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \ - ((nr == 2) ? (0x0150) : \ - (0x27))) -#define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \ - ((nr == 2) ? (0x153) : \ - (0x3A))) -#define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \ - ((nr == 2) ? (0x155) : \ - (0x39))) - -#define W83781D_REG_BANK 0x4E - -#define W83781D_REG_CONFIG 0x40 -#define W83781D_REG_ALARM1 0x41 -#define W83781D_REG_ALARM2 0x42 -#define W83781D_REG_ALARM3 0x450 - -#define W83781D_REG_IRQ 0x4C -#define W83781D_REG_BEEP_CONFIG 0x4D -#define W83781D_REG_BEEP_INTS1 0x56 -#define W83781D_REG_BEEP_INTS2 0x57 -#define W83781D_REG_BEEP_INTS3 0x453 - -#define W83781D_REG_VID_FANDIV 0x47 - -#define W83781D_REG_CHIPID 0x49 -#define W83781D_REG_WCHIPID 0x58 -#define W83781D_REG_CHIPMAN 0x4F -#define W83781D_REG_PIN 0x4B - -#define W83781D_REG_VBAT 0x5D - -#define W83627HF_REG_PWM1 0x5A -#define W83627HF_REG_PWM2 0x5B -#define W83627HF_REG_PWMCLK12 0x5C - -#define W83627THF_REG_PWM1 0x01 /* 697HF and 637HF too */ -#define W83627THF_REG_PWM2 0x03 /* 697HF and 637HF too */ -#define W83627THF_REG_PWM3 0x11 /* 637HF too */ - -#define W83627THF_REG_VRM_OVT_CFG 0x18 /* 637HF too */ - -static const u8 regpwm_627hf[] = { W83627HF_REG_PWM1, W83627HF_REG_PWM2 }; -static const u8 regpwm[] = { W83627THF_REG_PWM1, W83627THF_REG_PWM2, - W83627THF_REG_PWM3 }; -#define W836X7HF_REG_PWM(type, nr) (((type) == w83627hf) ? \ - regpwm_627hf[(nr) - 1] : regpwm[(nr) - 1]) - -#define W83781D_REG_I2C_ADDR 0x48 -#define W83781D_REG_I2C_SUBADDR 0x4A - -/* Sensor selection */ -#define W83781D_REG_SCFG1 0x5D -static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 }; -#define W83781D_REG_SCFG2 0x59 -static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 }; -#define W83781D_DEFAULT_BETA 3435 - -/* Conversions. Limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ -#define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255)) -#define IN_FROM_REG(val) ((val) * 16) - -static inline u8 FAN_TO_REG(long rpm, int div) -{ - if (rpm == 0) - return 255; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, - 254); -} - -#define TEMP_MIN (-128000) -#define TEMP_MAX ( 127000) - -/* TEMP: 0.001C/bit (-128C to +127C) - REG: 1C/bit, two's complement */ -static u8 TEMP_TO_REG(int temp) -{ - int ntemp = SENSORS_LIMIT(temp, TEMP_MIN, TEMP_MAX); - ntemp += (ntemp<0 ? -500 : 500); - return (u8)(ntemp / 1000); -} - -static int TEMP_FROM_REG(u8 reg) -{ - return (s8)reg * 1000; -} - -#define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) - -#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255)) - -#define BEEP_MASK_FROM_REG(val) (val) -#define BEEP_MASK_TO_REG(val) ((val) & 0xffffff) -#define BEEP_ENABLE_TO_REG(val) ((val)?1:0) -#define BEEP_ENABLE_FROM_REG(val) ((val)?1:0) - -#define DIV_FROM_REG(val) (1 << (val)) - -static inline u8 DIV_TO_REG(long val) -{ - int i; - val = SENSORS_LIMIT(val, 1, 128) >> 1; - for (i = 0; i < 7; i++) { - if (val == 0) - break; - val >>= 1; - } - return ((u8) i); -} - -/* For each registered chip, we need to keep some data in memory. That - data is pointed to by w83627hf_list[NR]->data. The structure itself is - dynamically allocated, at the same time when a new client is allocated. */ -struct w83627hf_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - struct i2c_client *lm75; /* for secondary I2C addresses */ - /* pointer to array of 2 subclients */ - - u8 in[9]; /* Register value */ - u8 in_max[9]; /* Register value */ - u8 in_min[9]; /* Register value */ - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ - u8 temp; - u8 temp_max; /* Register value */ - u8 temp_max_hyst; /* Register value */ - u16 temp_add[2]; /* Register value */ - u16 temp_max_add[2]; /* Register value */ - u16 temp_max_hyst_add[2]; /* Register value */ - u8 fan_div[3]; /* Register encoding, shifted right */ - u8 vid; /* Register encoding, combined */ - u32 alarms; /* Register encoding, combined */ - u32 beep_mask; /* Register encoding, combined */ - u8 beep_enable; /* Boolean */ - u8 pwm[3]; /* Register value */ - u16 sens[3]; /* 782D/783S only. - 1 = pentium diode; 2 = 3904 diode; - 3000-5000 = thermistor beta. - Default = 3435. - Other Betas unimplemented */ - u8 vrm; - u8 vrm_ovt; /* Register value, 627thf & 637hf only */ -}; - - -static int w83627hf_attach_adapter(struct i2c_adapter *adapter); -static int w83627hf_detect(struct i2c_adapter *adapter, int address, - int kind); -static int w83627hf_detach_client(struct i2c_client *client); - -static int w83627hf_read_value(struct i2c_client *client, u16 register); -static int w83627hf_write_value(struct i2c_client *client, u16 register, - u16 value); -static struct w83627hf_data *w83627hf_update_device(struct device *dev); -static void w83627hf_init_client(struct i2c_client *client); - -static struct i2c_driver w83627hf_driver = { - .owner = THIS_MODULE, - .name = "w83627hf", - .id = I2C_DRIVERID_W83627HF, - .flags = I2C_DF_NOTIFY, - .attach_adapter = w83627hf_attach_adapter, - .detach_client = w83627hf_detach_client, -}; - -/* following are the sysfs callback functions */ -#define show_in_reg(reg) \ -static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct w83627hf_data *data = w83627hf_update_device(dev); \ - return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr])); \ -} -show_in_reg(in) -show_in_reg(in_min) -show_in_reg(in_max) - -#define store_in_reg(REG, reg) \ -static ssize_t \ -store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627hf_data *data = i2c_get_clientdata(client); \ - u32 val; \ - \ - val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->in_##reg[nr] = IN_TO_REG(val); \ - w83627hf_write_value(client, W83781D_REG_IN_##REG(nr), \ - data->in_##reg[nr]); \ - \ - up(&data->update_lock); \ - return count; \ -} -store_in_reg(MIN, min) -store_in_reg(MAX, max) - -#define sysfs_in_offset(offset) \ -static ssize_t \ -show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL); - -#define sysfs_in_reg_offset(reg, offset) \ -static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_##reg (dev, buf, offset); \ -} \ -static ssize_t \ -store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_in_##reg (dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, \ - show_regs_in_##reg##offset, store_regs_in_##reg##offset); - -#define sysfs_in_offsets(offset) \ -sysfs_in_offset(offset) \ -sysfs_in_reg_offset(min, offset) \ -sysfs_in_reg_offset(max, offset) - -sysfs_in_offsets(1); -sysfs_in_offsets(2); -sysfs_in_offsets(3); -sysfs_in_offsets(4); -sysfs_in_offsets(5); -sysfs_in_offsets(6); -sysfs_in_offsets(7); -sysfs_in_offsets(8); - -/* use a different set of functions for in0 */ -static ssize_t show_in_0(struct w83627hf_data *data, char *buf, u8 reg) -{ - long in0; - - if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) - - /* use VRM9 calculation */ - in0 = (long)((reg * 488 + 70000 + 50) / 100); - else - /* use VRM8 (standard) calculation */ - in0 = (long)IN_FROM_REG(reg); - - return sprintf(buf,"%ld\n", in0); -} - -static ssize_t show_regs_in_0(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return show_in_0(data, buf, data->in[0]); -} - -static ssize_t show_regs_in_min0(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return show_in_0(data, buf, data->in_min[0]); -} - -static ssize_t show_regs_in_max0(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return show_in_0(data, buf, data->in_max[0]); -} - -static ssize_t store_regs_in_min0(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) - - /* use VRM9 calculation */ - data->in_min[0] = (u8)(((val * 100) - 70000 + 244) / 488); - else - /* use VRM8 (standard) calculation */ - data->in_min[0] = IN_TO_REG(val); - - w83627hf_write_value(client, W83781D_REG_IN_MIN(0), data->in_min[0]); - up(&data->update_lock); - return count; -} - -static ssize_t store_regs_in_max0(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - if ((data->vrm_ovt & 0x01) && - (w83627thf == data->type || w83637hf == data->type)) - - /* use VRM9 calculation */ - data->in_max[0] = (u8)(((val * 100) - 70000 + 244) / 488); - else - /* use VRM8 (standard) calculation */ - data->in_max[0] = IN_TO_REG(val); - - w83627hf_write_value(client, W83781D_REG_IN_MAX(0), data->in_max[0]); - up(&data->update_lock); - return count; -} - -static DEVICE_ATTR(in0_input, S_IRUGO, show_regs_in_0, NULL); -static DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, - show_regs_in_min0, store_regs_in_min0); -static DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, - show_regs_in_max0, store_regs_in_max0); - -#define device_create_file_in(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_in##offset##_input); \ -device_create_file(&client->dev, &dev_attr_in##offset##_min); \ -device_create_file(&client->dev, &dev_attr_in##offset##_max); \ -} while (0) - -#define show_fan_reg(reg) \ -static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct w83627hf_data *data = w83627hf_update_device(dev); \ - return sprintf(buf,"%ld\n", \ - FAN_FROM_REG(data->reg[nr-1], \ - (long)DIV_FROM_REG(data->fan_div[nr-1]))); \ -} -show_fan_reg(fan); -show_fan_reg(fan_min); - -static ssize_t -store_fan_min(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr - 1] = - FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1])); - w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr), - data->fan_min[nr - 1]); - - up(&data->update_lock); - return count; -} - -#define sysfs_fan_offset(offset) \ -static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL); - -#define sysfs_fan_min_offset(offset) \ -static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset); \ -} \ -static ssize_t \ -store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_fan_min(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ - show_regs_fan_min##offset, store_regs_fan_min##offset); - -sysfs_fan_offset(1); -sysfs_fan_min_offset(1); -sysfs_fan_offset(2); -sysfs_fan_min_offset(2); -sysfs_fan_offset(3); -sysfs_fan_min_offset(3); - -#define device_create_file_fan(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ -device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ -} while (0) - -#define show_temp_reg(reg) \ -static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct w83627hf_data *data = w83627hf_update_device(dev); \ - if (nr >= 2) { /* TEMP2 and TEMP3 */ \ - return sprintf(buf,"%ld\n", \ - (long)LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \ - } else { /* TEMP1 */ \ - return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \ - } \ -} -show_temp_reg(temp); -show_temp_reg(temp_max); -show_temp_reg(temp_max_hyst); - -#define store_temp_reg(REG, reg) \ -static ssize_t \ -store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83627hf_data *data = i2c_get_clientdata(client); \ - u32 val; \ - \ - val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - \ - if (nr >= 2) { /* TEMP2 and TEMP3 */ \ - data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \ - w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \ - data->temp_##reg##_add[nr-2]); \ - } else { /* TEMP1 */ \ - data->temp_##reg = TEMP_TO_REG(val); \ - w83627hf_write_value(client, W83781D_REG_TEMP_##REG(nr), \ - data->temp_##reg); \ - } \ - \ - up(&data->update_lock); \ - return count; \ -} -store_temp_reg(OVER, max); -store_temp_reg(HYST, max_hyst); - -#define sysfs_temp_offset(offset) \ -static ssize_t \ -show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, offset); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL); - -#define sysfs_temp_reg_offset(reg, offset) \ -static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_##reg (dev, buf, offset); \ -} \ -static ssize_t \ -store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_temp_##reg (dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, \ - show_regs_temp_##reg##offset, store_regs_temp_##reg##offset); - -#define sysfs_temp_offsets(offset) \ -sysfs_temp_offset(offset) \ -sysfs_temp_reg_offset(max, offset) \ -sysfs_temp_reg_offset(max_hyst, offset) - -sysfs_temp_offsets(1); -sysfs_temp_offsets(2); -sysfs_temp_offsets(3); - -#define device_create_file_temp(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \ -} while (0) - -static ssize_t -show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); -} -static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid) - -static ssize_t -show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->vrm); -} -static ssize_t -store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - data->vrm = val; - - return count; -} -static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm) - -static ssize_t -show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->alarms); -} -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); -#define device_create_file_alarms(client) \ -device_create_file(&client->dev, &dev_attr_alarms) - -#define show_beep_reg(REG, reg) \ -static ssize_t show_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct w83627hf_data *data = w83627hf_update_device(dev); \ - return sprintf(buf,"%ld\n", \ - (long)BEEP_##REG##_FROM_REG(data->beep_##reg)); \ -} -show_beep_reg(ENABLE, enable) -show_beep_reg(MASK, mask) - -#define BEEP_ENABLE 0 /* Store beep_enable */ -#define BEEP_MASK 1 /* Store beep_mask */ - -static ssize_t -store_beep_reg(struct device *dev, const char *buf, size_t count, - int update_mask) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - u32 val, val2; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - if (update_mask == BEEP_MASK) { /* We are storing beep_mask */ - data->beep_mask = BEEP_MASK_TO_REG(val); - w83627hf_write_value(client, W83781D_REG_BEEP_INTS1, - data->beep_mask & 0xff); - w83627hf_write_value(client, W83781D_REG_BEEP_INTS3, - ((data->beep_mask) >> 16) & 0xff); - val2 = (data->beep_mask >> 8) & 0x7f; - } else { /* We are storing beep_enable */ - val2 = - w83627hf_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f; - data->beep_enable = BEEP_ENABLE_TO_REG(val); - } - - w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, - val2 | data->beep_enable << 7); - - up(&data->update_lock); - return count; -} - -#define sysfs_beep(REG, reg) \ -static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_beep_##reg(dev, attr, buf); \ -} \ -static ssize_t \ -store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_beep_reg(dev, buf, count, BEEP_##REG); \ -} \ -static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, \ - show_regs_beep_##reg, store_regs_beep_##reg); - -sysfs_beep(ENABLE, enable); -sysfs_beep(MASK, mask); - -#define device_create_file_beep(client) \ -do { \ -device_create_file(&client->dev, &dev_attr_beep_enable); \ -device_create_file(&client->dev, &dev_attr_beep_mask); \ -} while (0) - -static ssize_t -show_fan_div_reg(struct device *dev, char *buf, int nr) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return sprintf(buf, "%ld\n", - (long) DIV_FROM_REG(data->fan_div[nr - 1])); -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t -store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - unsigned long min; - u8 reg; - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - /* Save fan_min */ - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - - data->fan_div[nr] = DIV_TO_REG(val); - - reg = (w83627hf_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV) - & (nr==0 ? 0xcf : 0x3f)) - | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6)); - w83627hf_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg); - - reg = (w83627hf_read_value(client, W83781D_REG_VBAT) - & ~(1 << (5 + nr))) - | ((data->fan_div[nr] & 0x04) << (3 + nr)); - w83627hf_write_value(client, W83781D_REG_VBAT, reg); - - /* Restore fan_min */ - data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - w83627hf_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]); - - up(&data->update_lock); - return count; -} - -#define sysfs_fan_div(offset) \ -static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div_reg(dev, buf, offset); \ -} \ -static ssize_t \ -store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_fan_div_reg(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ - show_regs_fan_div_##offset, store_regs_fan_div_##offset); - -sysfs_fan_div(1); -sysfs_fan_div(2); -sysfs_fan_div(3); - -#define device_create_file_fan_div(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ -} while (0) - -static ssize_t -show_pwm_reg(struct device *dev, char *buf, int nr) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->pwm[nr - 1]); -} - -static ssize_t -store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - if (data->type == w83627thf) { - /* bits 0-3 are reserved in 627THF */ - data->pwm[nr - 1] = PWM_TO_REG(val) & 0xf0; - w83627hf_write_value(client, - W836X7HF_REG_PWM(data->type, nr), - data->pwm[nr - 1] | - (w83627hf_read_value(client, - W836X7HF_REG_PWM(data->type, nr)) & 0x0f)); - } else { - data->pwm[nr - 1] = PWM_TO_REG(val); - w83627hf_write_value(client, - W836X7HF_REG_PWM(data->type, nr), - data->pwm[nr - 1]); - } - - up(&data->update_lock); - return count; -} - -#define sysfs_pwm(offset) \ -static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm_reg(dev, buf, offset); \ -} \ -static ssize_t \ -store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_pwm_reg(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_regs_pwm_##offset, store_regs_pwm_##offset); - -sysfs_pwm(1); -sysfs_pwm(2); -sysfs_pwm(3); - -#define device_create_file_pwm(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_pwm##offset); \ -} while (0) - -static ssize_t -show_sensor_reg(struct device *dev, char *buf, int nr) -{ - struct w83627hf_data *data = w83627hf_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]); -} - -static ssize_t -store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - u32 val, tmp; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - switch (val) { - case 1: /* PII/Celeron diode */ - tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); - w83627hf_write_value(client, W83781D_REG_SCFG1, - tmp | BIT_SCFG1[nr - 1]); - tmp = w83627hf_read_value(client, W83781D_REG_SCFG2); - w83627hf_write_value(client, W83781D_REG_SCFG2, - tmp | BIT_SCFG2[nr - 1]); - data->sens[nr - 1] = val; - break; - case 2: /* 3904 */ - tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); - w83627hf_write_value(client, W83781D_REG_SCFG1, - tmp | BIT_SCFG1[nr - 1]); - tmp = w83627hf_read_value(client, W83781D_REG_SCFG2); - w83627hf_write_value(client, W83781D_REG_SCFG2, - tmp & ~BIT_SCFG2[nr - 1]); - data->sens[nr - 1] = val; - break; - case W83781D_DEFAULT_BETA: /* thermistor */ - tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); - w83627hf_write_value(client, W83781D_REG_SCFG1, - tmp & ~BIT_SCFG1[nr - 1]); - data->sens[nr - 1] = val; - break; - default: - dev_err(&client->dev, - "Invalid sensor type %ld; must be 1, 2, or %d\n", - (long) val, W83781D_DEFAULT_BETA); - break; - } - - up(&data->update_lock); - return count; -} - -#define sysfs_sensor(offset) \ -static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_sensor_reg(dev, buf, offset); \ -} \ -static ssize_t \ -store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_sensor_reg(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ - show_regs_sensor_##offset, store_regs_sensor_##offset); - -sysfs_sensor(1); -sysfs_sensor(2); -sysfs_sensor(3); - -#define device_create_file_sensor(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_type); \ -} while (0) - - -/* This function is called when: - * w83627hf_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83627hf_driver is still present) */ -static int w83627hf_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_detect(adapter, &addr_data, w83627hf_detect); -} - -static int w83627hf_find(int sioaddr, int *address) -{ - u16 val; - - REG = sioaddr; - VAL = sioaddr + 1; - - superio_enter(); - val= superio_inb(DEVID); - if(val != W627_DEVID && - val != W627THF_DEVID && - val != W697_DEVID && - val != W637_DEVID) { - superio_exit(); - return -ENODEV; - } - - superio_select(W83627HF_LD_HWM); - val = (superio_inb(WINB_BASE_REG) << 8) | - superio_inb(WINB_BASE_REG + 1); - *address = val & ~(WINB_EXTENT - 1); - if (*address == 0 && force_addr == 0) { - superio_exit(); - return -ENODEV; - } - if (force_addr) - *address = force_addr; /* so detect will get called */ - - superio_exit(); - return 0; -} - -int w83627hf_detect(struct i2c_adapter *adapter, int address, - int kind) -{ - int val; - struct i2c_client *new_client; - struct w83627hf_data *data; - int err = 0; - const char *client_name = ""; - - if (!i2c_is_isa_adapter(adapter)) { - err = -ENODEV; - goto ERROR0; - } - - if(force_addr) - address = force_addr & ~(WINB_EXTENT - 1); - - if (!request_region(address, WINB_EXTENT, w83627hf_driver.name)) { - err = -EBUSY; - goto ERROR0; - } - - if(force_addr) { - printk("w83627hf.o: forcing ISA address 0x%04X\n", address); - superio_enter(); - superio_select(W83627HF_LD_HWM); - superio_outb(WINB_BASE_REG, address >> 8); - superio_outb(WINB_BASE_REG+1, address & 0xff); - superio_exit(); - } - - superio_enter(); - val= superio_inb(DEVID); - if(val == W627_DEVID) - kind = w83627hf; - else if(val == W697_DEVID) - kind = w83697hf; - else if(val == W627THF_DEVID) - kind = w83627thf; - else if(val == W637_DEVID) - kind = w83637hf; - else { - dev_info(&adapter->dev, - "Unsupported chip (dev_id=0x%02X).\n", val); - goto ERROR1; - } - - superio_select(W83627HF_LD_HWM); - if((val = 0x01 & superio_inb(WINB_ACT_REG)) == 0) - superio_outb(WINB_ACT_REG, 1); - superio_exit(); - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83627hf_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct w83627hf_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR1; - } - memset(data, 0, sizeof(struct w83627hf_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - init_MUTEX(&data->lock); - new_client->adapter = adapter; - new_client->driver = &w83627hf_driver; - new_client->flags = 0; - - - if (kind == w83627hf) { - client_name = "w83627hf"; - } else if (kind == w83627thf) { - client_name = "w83627thf"; - } else if (kind == w83697hf) { - client_name = "w83697hf"; - } else if (kind == w83637hf) { - client_name = "w83637hf"; - } - - /* Fill in the remaining client fields and put into the global list */ - strlcpy(new_client->name, client_name, I2C_NAME_SIZE); - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR2; - - data->lm75 = NULL; - - /* Initialize the chip */ - w83627hf_init_client(new_client); - - /* A few vars need to be filled upon startup */ - data->fan_min[0] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(1)); - data->fan_min[1] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(2)); - data->fan_min[2] = w83627hf_read_value(new_client, W83781D_REG_FAN_MIN(3)); - - /* Register sysfs hooks */ - device_create_file_in(new_client, 0); - if (kind != w83697hf) - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - device_create_file_in(new_client, 4); - if (kind != w83627thf && kind != w83637hf) { - device_create_file_in(new_client, 5); - device_create_file_in(new_client, 6); - } - device_create_file_in(new_client, 7); - device_create_file_in(new_client, 8); - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - if (kind != w83697hf) - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - if (kind != w83697hf) - device_create_file_temp(new_client, 3); - - if (kind != w83697hf) - device_create_file_vid(new_client); - - if (kind != w83697hf) - device_create_file_vrm(new_client); - - device_create_file_fan_div(new_client, 1); - device_create_file_fan_div(new_client, 2); - if (kind != w83697hf) - device_create_file_fan_div(new_client, 3); - - device_create_file_alarms(new_client); - - device_create_file_beep(new_client); - - device_create_file_pwm(new_client, 1); - device_create_file_pwm(new_client, 2); - if (kind == w83627thf || kind == w83637hf) - device_create_file_pwm(new_client, 3); - - device_create_file_sensor(new_client, 1); - device_create_file_sensor(new_client, 2); - if (kind != w83697hf) - device_create_file_sensor(new_client, 3); - - return 0; - - ERROR2: - kfree(data); - ERROR1: - release_region(address, WINB_EXTENT); - ERROR0: - return err; -} - -static int w83627hf_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - release_region(client->addr, WINB_EXTENT); - kfree(i2c_get_clientdata(client)); - - return 0; -} - - -/* - ISA access must always be locked explicitly! - We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks, - would slow down the W83781D access and should not be necessary. - There are some ugly typecasts here, but the good news is - they should - nowhere else be necessary! */ -static int w83627hf_read_value(struct i2c_client *client, u16 reg) -{ - struct w83627hf_data *data = i2c_get_clientdata(client); - int res, word_sized; - - down(&data->lock); - word_sized = (((reg & 0xff00) == 0x100) - || ((reg & 0xff00) == 0x200)) - && (((reg & 0x00ff) == 0x50) - || ((reg & 0x00ff) == 0x53) - || ((reg & 0x00ff) == 0x55)); - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(reg >> 8, - client->addr + W83781D_DATA_REG_OFFSET); - } - outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); - res = inb_p(client->addr + W83781D_DATA_REG_OFFSET); - if (word_sized) { - outb_p((reg & 0xff) + 1, - client->addr + W83781D_ADDR_REG_OFFSET); - res = - (res << 8) + inb_p(client->addr + - W83781D_DATA_REG_OFFSET); - } - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); - } - up(&data->lock); - return res; -} - -static int w83627thf_read_gpio5(struct i2c_client *client) -{ - int res = 0xff, sel; - - superio_enter(); - superio_select(W83627HF_LD_GPIO5); - - /* Make sure these GPIO pins are enabled */ - if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) { - dev_dbg(&client->dev, "GPIO5 disabled, no VID function\n"); - goto exit; - } - - /* Make sure the pins are configured for input - There must be at least five (VRM 9), and possibly 6 (VRM 10) */ - sel = superio_inb(W83627THF_GPIO5_IOSR); - if ((sel & 0x1f) != 0x1f) { - dev_dbg(&client->dev, "GPIO5 not configured for VID " - "function\n"); - goto exit; - } - - dev_info(&client->dev, "Reading VID from GPIO5\n"); - res = superio_inb(W83627THF_GPIO5_DR) & sel; - -exit: - superio_exit(); - return res; -} - -static int w83627hf_write_value(struct i2c_client *client, u16 reg, u16 value) -{ - struct w83627hf_data *data = i2c_get_clientdata(client); - int word_sized; - - down(&data->lock); - word_sized = (((reg & 0xff00) == 0x100) - || ((reg & 0xff00) == 0x200)) - && (((reg & 0x00ff) == 0x53) - || ((reg & 0x00ff) == 0x55)); - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(reg >> 8, - client->addr + W83781D_DATA_REG_OFFSET); - } - outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); - if (word_sized) { - outb_p(value >> 8, - client->addr + W83781D_DATA_REG_OFFSET); - outb_p((reg & 0xff) + 1, - client->addr + W83781D_ADDR_REG_OFFSET); - } - outb_p(value & 0xff, - client->addr + W83781D_DATA_REG_OFFSET); - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); - } - up(&data->lock); - return 0; -} - -/* Called when we have found a new W83781D. It should set limits, etc. */ -static void w83627hf_init_client(struct i2c_client *client) -{ - struct w83627hf_data *data = i2c_get_clientdata(client); - int i; - int type = data->type; - u8 tmp; - - if(init) { - /* save this register */ - i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG); - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others */ - w83627hf_write_value(client, W83781D_REG_CONFIG, 0x80); - /* Restore the register and disable power-on abnormal beep. - This saves FAN 1/2/3 input/output values set by BIOS. */ - w83627hf_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80); - /* Disable master beep-enable (reset turns it on). - Individual beeps should be reset to off but for some reason - disabling this bit helps some people not get beeped */ - w83627hf_write_value(client, W83781D_REG_BEEP_INTS2, 0); - } - - /* Minimize conflicts with other winbond i2c-only clients... */ - /* disable i2c subclients... how to disable main i2c client?? */ - /* force i2c address to relatively uncommon address */ - w83627hf_write_value(client, W83781D_REG_I2C_SUBADDR, 0x89); - w83627hf_write_value(client, W83781D_REG_I2C_ADDR, force_i2c); - - /* Read VID only once */ - if (w83627hf == data->type || w83637hf == data->type) { - int lo = w83627hf_read_value(client, W83781D_REG_VID_FANDIV); - int hi = w83627hf_read_value(client, W83781D_REG_CHIPID); - data->vid = (lo & 0x0f) | ((hi & 0x01) << 4); - } else if (w83627thf == data->type) { - data->vid = w83627thf_read_gpio5(client) & 0x3f; - } - - /* Read VRM & OVT Config only once */ - if (w83627thf == data->type || w83637hf == data->type) { - data->vrm_ovt = - w83627hf_read_value(client, W83627THF_REG_VRM_OVT_CFG); - data->vrm = (data->vrm_ovt & 0x01) ? 90 : 82; - } else { - /* Convert VID to voltage based on default VRM */ - data->vrm = i2c_which_vrm(); - } - - tmp = w83627hf_read_value(client, W83781D_REG_SCFG1); - for (i = 1; i <= 3; i++) { - if (!(tmp & BIT_SCFG1[i - 1])) { - data->sens[i - 1] = W83781D_DEFAULT_BETA; - } else { - if (w83627hf_read_value - (client, - W83781D_REG_SCFG2) & BIT_SCFG2[i - 1]) - data->sens[i - 1] = 1; - else - data->sens[i - 1] = 2; - } - if ((type == w83697hf) && (i == 2)) - break; - } - - if(init) { - /* Enable temp2 */ - tmp = w83627hf_read_value(client, W83781D_REG_TEMP2_CONFIG); - if (tmp & 0x01) { - dev_warn(&client->dev, "Enabling temp2, readings " - "might not make sense\n"); - w83627hf_write_value(client, W83781D_REG_TEMP2_CONFIG, - tmp & 0xfe); - } - - /* Enable temp3 */ - if (type != w83697hf) { - tmp = w83627hf_read_value(client, - W83781D_REG_TEMP3_CONFIG); - if (tmp & 0x01) { - dev_warn(&client->dev, "Enabling temp3, " - "readings might not make sense\n"); - w83627hf_write_value(client, - W83781D_REG_TEMP3_CONFIG, tmp & 0xfe); - } - } - - if (type == w83627hf) { - /* enable PWM2 control (can't hurt since PWM reg - should have been reset to 0xff) */ - w83627hf_write_value(client, W83627HF_REG_PWMCLK12, - 0x19); - } - /* enable comparator mode for temp2 and temp3 so - alarm indication will work correctly */ - i = w83627hf_read_value(client, W83781D_REG_IRQ); - if (!(i & 0x40)) - w83627hf_write_value(client, W83781D_REG_IRQ, - i | 0x40); - } - - /* Start monitoring */ - w83627hf_write_value(client, W83781D_REG_CONFIG, - (w83627hf_read_value(client, - W83781D_REG_CONFIG) & 0xf7) - | 0x01); -} - -static struct w83627hf_data *w83627hf_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83627hf_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - for (i = 0; i <= 8; i++) { - /* skip missing sensors */ - if (((data->type == w83697hf) && (i == 1)) || - ((data->type == w83627thf || data->type == w83637hf) - && (i == 4 || i == 5))) - continue; - data->in[i] = - w83627hf_read_value(client, W83781D_REG_IN(i)); - data->in_min[i] = - w83627hf_read_value(client, - W83781D_REG_IN_MIN(i)); - data->in_max[i] = - w83627hf_read_value(client, - W83781D_REG_IN_MAX(i)); - } - for (i = 1; i <= 3; i++) { - data->fan[i - 1] = - w83627hf_read_value(client, W83781D_REG_FAN(i)); - data->fan_min[i - 1] = - w83627hf_read_value(client, - W83781D_REG_FAN_MIN(i)); - } - for (i = 1; i <= 3; i++) { - u8 tmp = w83627hf_read_value(client, - W836X7HF_REG_PWM(data->type, i)); - /* bits 0-3 are reserved in 627THF */ - if (data->type == w83627thf) - tmp &= 0xf0; - data->pwm[i - 1] = tmp; - if(i == 2 && - (data->type == w83627hf || data->type == w83697hf)) - break; - } - - data->temp = w83627hf_read_value(client, W83781D_REG_TEMP(1)); - data->temp_max = - w83627hf_read_value(client, W83781D_REG_TEMP_OVER(1)); - data->temp_max_hyst = - w83627hf_read_value(client, W83781D_REG_TEMP_HYST(1)); - data->temp_add[0] = - w83627hf_read_value(client, W83781D_REG_TEMP(2)); - data->temp_max_add[0] = - w83627hf_read_value(client, W83781D_REG_TEMP_OVER(2)); - data->temp_max_hyst_add[0] = - w83627hf_read_value(client, W83781D_REG_TEMP_HYST(2)); - if (data->type != w83697hf) { - data->temp_add[1] = - w83627hf_read_value(client, W83781D_REG_TEMP(3)); - data->temp_max_add[1] = - w83627hf_read_value(client, W83781D_REG_TEMP_OVER(3)); - data->temp_max_hyst_add[1] = - w83627hf_read_value(client, W83781D_REG_TEMP_HYST(3)); - } - - i = w83627hf_read_value(client, W83781D_REG_VID_FANDIV); - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = (i >> 6) & 0x03; - if (data->type != w83697hf) { - data->fan_div[2] = (w83627hf_read_value(client, - W83781D_REG_PIN) >> 6) & 0x03; - } - i = w83627hf_read_value(client, W83781D_REG_VBAT); - data->fan_div[0] |= (i >> 3) & 0x04; - data->fan_div[1] |= (i >> 4) & 0x04; - if (data->type != w83697hf) - data->fan_div[2] |= (i >> 5) & 0x04; - data->alarms = - w83627hf_read_value(client, W83781D_REG_ALARM1) | - (w83627hf_read_value(client, W83781D_REG_ALARM2) << 8) | - (w83627hf_read_value(client, W83781D_REG_ALARM3) << 16); - i = w83627hf_read_value(client, W83781D_REG_BEEP_INTS2); - data->beep_enable = i >> 7; - data->beep_mask = ((i & 0x7f) << 8) | - w83627hf_read_value(client, W83781D_REG_BEEP_INTS1) | - w83627hf_read_value(client, W83781D_REG_BEEP_INTS3) << 16; - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_w83627hf_init(void) -{ - int addr; - - if (w83627hf_find(0x2e, &addr) - && w83627hf_find(0x4e, &addr)) { - return -ENODEV; - } - normal_isa[0] = addr; - - return i2c_add_driver(&w83627hf_driver); -} - -static void __exit sensors_w83627hf_exit(void) -{ - i2c_del_driver(&w83627hf_driver); -} - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " - "Philip Edelbrock <phil@netroedge.com>, " - "and Mark Studebaker <mdsxyz123@yahoo.com>"); -MODULE_DESCRIPTION("W83627HF driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_w83627hf_init); -module_exit(sensors_w83627hf_exit); diff --git a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c deleted file mode 100644 index 0bb131ce09eb..000000000000 --- a/drivers/i2c/chips/w83781d.c +++ /dev/null @@ -1,1632 +0,0 @@ -/* - w83781d.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, - and Mark Studebaker <mdsxyz123@yahoo.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - Supports following chips: - - Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA - as99127f 7 3 0 3 0x31 0x12c3 yes no - as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no - w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes - w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC) - w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes - w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no - -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> -#include <linux/i2c-vid.h> -#include <asm/io.h> -#include "lm75.h" - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, - 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, - 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f); -I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: " - "{bus, clientaddr, subclientaddr1, subclientaddr2}"); - -static int init = 1; -module_param(init, bool, 0); -MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); - -/* Constants specified below */ - -/* Length of ISA address segment */ -#define W83781D_EXTENT 8 - -/* Where are the ISA address/data registers relative to the base address */ -#define W83781D_ADDR_REG_OFFSET 5 -#define W83781D_DATA_REG_OFFSET 6 - -/* The W83781D registers */ -/* The W83782D registers for nr=7,8 are in bank 5 */ -#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ - (0x554 + (((nr) - 7) * 2))) -#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ - (0x555 + (((nr) - 7) * 2))) -#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ - (0x550 + (nr) - 7)) - -#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr)) -#define W83781D_REG_FAN(nr) (0x27 + (nr)) - -#define W83781D_REG_BANK 0x4E -#define W83781D_REG_TEMP2_CONFIG 0x152 -#define W83781D_REG_TEMP3_CONFIG 0x252 -#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \ - ((nr == 2) ? (0x0150) : \ - (0x27))) -#define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \ - ((nr == 2) ? (0x153) : \ - (0x3A))) -#define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \ - ((nr == 2) ? (0x155) : \ - (0x39))) - -#define W83781D_REG_CONFIG 0x40 -#define W83781D_REG_ALARM1 0x41 -#define W83781D_REG_ALARM2 0x42 -#define W83781D_REG_ALARM3 0x450 /* not on W83781D */ - -#define W83781D_REG_IRQ 0x4C -#define W83781D_REG_BEEP_CONFIG 0x4D -#define W83781D_REG_BEEP_INTS1 0x56 -#define W83781D_REG_BEEP_INTS2 0x57 -#define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */ - -#define W83781D_REG_VID_FANDIV 0x47 - -#define W83781D_REG_CHIPID 0x49 -#define W83781D_REG_WCHIPID 0x58 -#define W83781D_REG_CHIPMAN 0x4F -#define W83781D_REG_PIN 0x4B - -/* 782D/783S only */ -#define W83781D_REG_VBAT 0x5D - -/* PWM 782D (1-4) and 783S (1-2) only */ -#define W83781D_REG_PWM1 0x5B /* 782d and 783s/627hf datasheets disagree */ - /* on which is which; */ -#define W83781D_REG_PWM2 0x5A /* We follow the 782d convention here, */ - /* However 782d is probably wrong. */ -#define W83781D_REG_PWM3 0x5E -#define W83781D_REG_PWM4 0x5F -#define W83781D_REG_PWMCLK12 0x5C -#define W83781D_REG_PWMCLK34 0x45C -static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2, - W83781D_REG_PWM3, W83781D_REG_PWM4 -}; - -#define W83781D_REG_PWM(nr) (regpwm[(nr) - 1]) - -#define W83781D_REG_I2C_ADDR 0x48 -#define W83781D_REG_I2C_SUBADDR 0x4A - -/* The following are undocumented in the data sheets however we - received the information in an email from Winbond tech support */ -/* Sensor selection - not on 781d */ -#define W83781D_REG_SCFG1 0x5D -static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 }; - -#define W83781D_REG_SCFG2 0x59 -static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 }; - -#define W83781D_DEFAULT_BETA 3435 - -/* RT Table registers */ -#define W83781D_REG_RT_IDX 0x50 -#define W83781D_REG_RT_VAL 0x51 - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ -#define IN_TO_REG(val) (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255)) -#define IN_FROM_REG(val) (((val) * 16) / 10) - -static inline u8 -FAN_TO_REG(long rpm, int div) -{ - if (rpm == 0) - return 255; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); -} - -#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \ - ((val) == 255 ? 0 : \ - 1350000 / ((val) * (div)))) - -#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \ - : (val)) / 1000, 0, 0xff)) -#define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000) - -#define PWM_FROM_REG(val) (val) -#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255)) -#define BEEP_MASK_FROM_REG(val,type) ((type) == as99127f ? \ - (val) ^ 0x7fff : (val)) -#define BEEP_MASK_TO_REG(val,type) ((type) == as99127f ? \ - (~(val)) & 0x7fff : (val) & 0xffffff) - -#define BEEP_ENABLE_TO_REG(val) ((val) ? 1 : 0) -#define BEEP_ENABLE_FROM_REG(val) ((val) ? 1 : 0) - -#define DIV_FROM_REG(val) (1 << (val)) - -static inline u8 -DIV_TO_REG(long val, enum chips type) -{ - int i; - val = SENSORS_LIMIT(val, 1, - ((type == w83781d - || type == as99127f) ? 8 : 128)) >> 1; - for (i = 0; i < 7; i++) { - if (val == 0) - break; - val >>= 1; - } - return ((u8) i); -} - -/* There are some complications in a module like this. First off, W83781D chips - may be both present on the SMBus and the ISA bus, and we have to handle - those cases separately at some places. Second, there might be several - W83781D chips available (well, actually, that is probably never done; but - it is a clean illustration of how to handle a case like that). Finally, - a specific chip may be attached to *both* ISA and SMBus, and we would - not like to detect it double. Fortunately, in the case of the W83781D at - least, a register tells us what SMBus address we are on, so that helps - a bit - except if there could be more than one SMBus. Groan. No solution - for this yet. */ - -/* This module may seem overly long and complicated. In fact, it is not so - bad. Quite a lot of bookkeeping is done. A real driver can often cut - some corners. */ - -/* For each registered W83781D, we need to keep some data in memory. That - data is pointed to by w83781d_list[NR]->data. The structure itself is - dynamically allocated, at the same time when a new w83781d client is - allocated. */ -struct w83781d_data { - struct i2c_client client; - struct semaphore lock; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - struct i2c_client *lm75[2]; /* for secondary I2C addresses */ - /* array of 2 pointers to subclients */ - - u8 in[9]; /* Register value - 8 & 9 for 782D only */ - u8 in_max[9]; /* Register value - 8 & 9 for 782D only */ - u8 in_min[9]; /* Register value - 8 & 9 for 782D only */ - u8 fan[3]; /* Register value */ - u8 fan_min[3]; /* Register value */ - u8 temp; - u8 temp_max; /* Register value */ - u8 temp_max_hyst; /* Register value */ - u16 temp_add[2]; /* Register value */ - u16 temp_max_add[2]; /* Register value */ - u16 temp_max_hyst_add[2]; /* Register value */ - u8 fan_div[3]; /* Register encoding, shifted right */ - u8 vid; /* Register encoding, combined */ - u32 alarms; /* Register encoding, combined */ - u32 beep_mask; /* Register encoding, combined */ - u8 beep_enable; /* Boolean */ - u8 pwm[4]; /* Register value */ - u8 pwmenable[4]; /* Boolean */ - u16 sens[3]; /* 782D/783S only. - 1 = pentium diode; 2 = 3904 diode; - 3000-5000 = thermistor beta. - Default = 3435. - Other Betas unimplemented */ - u8 vrm; -}; - -static int w83781d_attach_adapter(struct i2c_adapter *adapter); -static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83781d_detach_client(struct i2c_client *client); - -static int w83781d_read_value(struct i2c_client *client, u16 register); -static int w83781d_write_value(struct i2c_client *client, u16 register, - u16 value); -static struct w83781d_data *w83781d_update_device(struct device *dev); -static void w83781d_init_client(struct i2c_client *client); - -static struct i2c_driver w83781d_driver = { - .owner = THIS_MODULE, - .name = "w83781d", - .id = I2C_DRIVERID_W83781D, - .flags = I2C_DF_NOTIFY, - .attach_adapter = w83781d_attach_adapter, - .detach_client = w83781d_detach_client, -}; - -/* following are the sysfs callback functions */ -#define show_in_reg(reg) \ -static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct w83781d_data *data = w83781d_update_device(dev); \ - return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \ -} -show_in_reg(in); -show_in_reg(in_min); -show_in_reg(in_max); - -#define store_in_reg(REG, reg) \ -static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83781d_data *data = i2c_get_clientdata(client); \ - u32 val; \ - \ - val = simple_strtoul(buf, NULL, 10) / 10; \ - \ - down(&data->update_lock); \ - data->in_##reg[nr] = IN_TO_REG(val); \ - w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \ - \ - up(&data->update_lock); \ - return count; \ -} -store_in_reg(MIN, min); -store_in_reg(MAX, max); - -#define sysfs_in_offset(offset) \ -static ssize_t \ -show_regs_in_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in(dev, buf, offset); \ -} \ -static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL); - -#define sysfs_in_reg_offset(reg, offset) \ -static ssize_t show_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_in_##reg (dev, buf, offset); \ -} \ -static ssize_t store_regs_in_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_in_##reg (dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset); - -#define sysfs_in_offsets(offset) \ -sysfs_in_offset(offset); \ -sysfs_in_reg_offset(min, offset); \ -sysfs_in_reg_offset(max, offset); - -sysfs_in_offsets(0); -sysfs_in_offsets(1); -sysfs_in_offsets(2); -sysfs_in_offsets(3); -sysfs_in_offsets(4); -sysfs_in_offsets(5); -sysfs_in_offsets(6); -sysfs_in_offsets(7); -sysfs_in_offsets(8); - -#define device_create_file_in(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_in##offset##_input); \ -device_create_file(&client->dev, &dev_attr_in##offset##_min); \ -device_create_file(&client->dev, &dev_attr_in##offset##_max); \ -} while (0) - -#define show_fan_reg(reg) \ -static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct w83781d_data *data = w83781d_update_device(dev); \ - return sprintf(buf,"%ld\n", \ - FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \ -} -show_fan_reg(fan); -show_fan_reg(fan_min); - -static ssize_t -store_fan_min(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->fan_min[nr - 1] = - FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1])); - w83781d_write_value(client, W83781D_REG_FAN_MIN(nr), - data->fan_min[nr - 1]); - - up(&data->update_lock); - return count; -} - -#define sysfs_fan_offset(offset) \ -static ssize_t show_regs_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan(dev, buf, offset); \ -} \ -static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL); - -#define sysfs_fan_min_offset(offset) \ -static ssize_t show_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_min(dev, buf, offset); \ -} \ -static ssize_t store_regs_fan_min##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_fan_min(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset); - -sysfs_fan_offset(1); -sysfs_fan_min_offset(1); -sysfs_fan_offset(2); -sysfs_fan_min_offset(2); -sysfs_fan_offset(3); -sysfs_fan_min_offset(3); - -#define device_create_file_fan(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_input); \ -device_create_file(&client->dev, &dev_attr_fan##offset##_min); \ -} while (0) - -#define show_temp_reg(reg) \ -static ssize_t show_##reg (struct device *dev, char *buf, int nr) \ -{ \ - struct w83781d_data *data = w83781d_update_device(dev); \ - if (nr >= 2) { /* TEMP2 and TEMP3 */ \ - return sprintf(buf,"%d\n", \ - LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \ - } else { /* TEMP1 */ \ - return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \ - } \ -} -show_temp_reg(temp); -show_temp_reg(temp_max); -show_temp_reg(temp_max_hyst); - -#define store_temp_reg(REG, reg) \ -static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct w83781d_data *data = i2c_get_clientdata(client); \ - s32 val; \ - \ - val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - \ - if (nr >= 2) { /* TEMP2 and TEMP3 */ \ - data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \ - w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \ - data->temp_##reg##_add[nr-2]); \ - } else { /* TEMP1 */ \ - data->temp_##reg = TEMP_TO_REG(val); \ - w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \ - data->temp_##reg); \ - } \ - \ - up(&data->update_lock); \ - return count; \ -} -store_temp_reg(OVER, max); -store_temp_reg(HYST, max_hyst); - -#define sysfs_temp_offset(offset) \ -static ssize_t \ -show_regs_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp(dev, buf, offset); \ -} \ -static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL); - -#define sysfs_temp_reg_offset(reg, offset) \ -static ssize_t show_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_temp_##reg (dev, buf, offset); \ -} \ -static ssize_t store_regs_temp_##reg##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_temp_##reg (dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset); - -#define sysfs_temp_offsets(offset) \ -sysfs_temp_offset(offset); \ -sysfs_temp_reg_offset(max, offset); \ -sysfs_temp_reg_offset(max_hyst, offset); - -sysfs_temp_offsets(1); -sysfs_temp_offsets(2); -sysfs_temp_offsets(3); - -#define device_create_file_temp(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_input); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max); \ -device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \ -} while (0) - -static ssize_t -show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); -} - -static -DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -#define device_create_file_vid(client) \ -device_create_file(&client->dev, &dev_attr_cpu0_vid); -static ssize_t -show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->vrm); -} - -static ssize_t -store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - data->vrm = val; - - return count; -} - -static -DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -#define device_create_file_vrm(client) \ -device_create_file(&client->dev, &dev_attr_vrm); -static ssize_t -show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static -DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL); -#define device_create_file_alarms(client) \ -device_create_file(&client->dev, &dev_attr_alarms); -static ssize_t show_beep_mask (struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", - (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type)); -} -static ssize_t show_beep_enable (struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", - (long)BEEP_ENABLE_FROM_REG(data->beep_enable)); -} - -#define BEEP_ENABLE 0 /* Store beep_enable */ -#define BEEP_MASK 1 /* Store beep_mask */ - -static ssize_t -store_beep_reg(struct device *dev, const char *buf, size_t count, - int update_mask) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - u32 val, val2; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - if (update_mask == BEEP_MASK) { /* We are storing beep_mask */ - data->beep_mask = BEEP_MASK_TO_REG(val, data->type); - w83781d_write_value(client, W83781D_REG_BEEP_INTS1, - data->beep_mask & 0xff); - - if ((data->type != w83781d) && (data->type != as99127f)) { - w83781d_write_value(client, W83781D_REG_BEEP_INTS3, - ((data->beep_mask) >> 16) & 0xff); - } - - val2 = (data->beep_mask >> 8) & 0x7f; - } else { /* We are storing beep_enable */ - val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f; - data->beep_enable = BEEP_ENABLE_TO_REG(val); - } - - w83781d_write_value(client, W83781D_REG_BEEP_INTS2, - val2 | data->beep_enable << 7); - - up(&data->update_lock); - return count; -} - -#define sysfs_beep(REG, reg) \ -static ssize_t show_regs_beep_##reg (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_beep_##reg(dev, attr, buf); \ -} \ -static ssize_t store_regs_beep_##reg (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_beep_reg(dev, buf, count, BEEP_##REG); \ -} \ -static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg); - -sysfs_beep(ENABLE, enable); -sysfs_beep(MASK, mask); - -#define device_create_file_beep(client) \ -do { \ -device_create_file(&client->dev, &dev_attr_beep_enable); \ -device_create_file(&client->dev, &dev_attr_beep_mask); \ -} while (0) - -static ssize_t -show_fan_div_reg(struct device *dev, char *buf, int nr) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", - (long) DIV_FROM_REG(data->fan_div[nr - 1])); -} - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t -store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - unsigned long min; - u8 reg; - unsigned long val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - /* Save fan_min */ - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - - data->fan_div[nr] = DIV_TO_REG(val, data->type); - - reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV) - & (nr==0 ? 0xcf : 0x3f)) - | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6)); - w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg); - - /* w83781d and as99127f don't have extended divisor bits */ - if (data->type != w83781d && data->type != as99127f) { - reg = (w83781d_read_value(client, W83781D_REG_VBAT) - & ~(1 << (5 + nr))) - | ((data->fan_div[nr] & 0x04) << (3 + nr)); - w83781d_write_value(client, W83781D_REG_VBAT, reg); - } - - /* Restore fan_min */ - data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]); - - up(&data->update_lock); - return count; -} - -#define sysfs_fan_div(offset) \ -static ssize_t show_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_fan_div_reg(dev, buf, offset); \ -} \ -static ssize_t store_regs_fan_div_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_fan_div_reg(dev, buf, count, offset - 1); \ -} \ -static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset); - -sysfs_fan_div(1); -sysfs_fan_div(2); -sysfs_fan_div(3); - -#define device_create_file_fan_div(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_fan##offset##_div); \ -} while (0) - -static ssize_t -show_pwm_reg(struct device *dev, char *buf, int nr) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1])); -} - -static ssize_t -show_pwmenable_reg(struct device *dev, char *buf, int nr) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]); -} - -static ssize_t -store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - u32 val; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - data->pwm[nr - 1] = PWM_TO_REG(val); - w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]); - up(&data->update_lock); - return count; -} - -static ssize_t -store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - u32 val, reg; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - switch (val) { - case 0: - case 1: - reg = w83781d_read_value(client, W83781D_REG_PWMCLK12); - w83781d_write_value(client, W83781D_REG_PWMCLK12, - (reg & 0xf7) | (val << 3)); - - reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); - w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, - (reg & 0xef) | (!val << 4)); - - data->pwmenable[nr - 1] = val; - break; - - default: - up(&data->update_lock); - return -EINVAL; - } - - up(&data->update_lock); - return count; -} - -#define sysfs_pwm(offset) \ -static ssize_t show_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwm_reg(dev, buf, offset); \ -} \ -static ssize_t store_regs_pwm_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_pwm_reg(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ - show_regs_pwm_##offset, store_regs_pwm_##offset); - -#define sysfs_pwmenable(offset) \ -static ssize_t show_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_pwmenable_reg(dev, buf, offset); \ -} \ -static ssize_t store_regs_pwmenable_##offset (struct device *dev, struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - return store_pwmenable_reg(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ - show_regs_pwmenable_##offset, store_regs_pwmenable_##offset); - -sysfs_pwm(1); -sysfs_pwm(2); -sysfs_pwmenable(2); /* only PWM2 can be enabled/disabled */ -sysfs_pwm(3); -sysfs_pwm(4); - -#define device_create_file_pwm(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_pwm##offset); \ -} while (0) - -#define device_create_file_pwmenable(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \ -} while (0) - -static ssize_t -show_sensor_reg(struct device *dev, char *buf, int nr) -{ - struct w83781d_data *data = w83781d_update_device(dev); - return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]); -} - -static ssize_t -store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - u32 val, tmp; - - val = simple_strtoul(buf, NULL, 10); - - down(&data->update_lock); - - switch (val) { - case 1: /* PII/Celeron diode */ - tmp = w83781d_read_value(client, W83781D_REG_SCFG1); - w83781d_write_value(client, W83781D_REG_SCFG1, - tmp | BIT_SCFG1[nr - 1]); - tmp = w83781d_read_value(client, W83781D_REG_SCFG2); - w83781d_write_value(client, W83781D_REG_SCFG2, - tmp | BIT_SCFG2[nr - 1]); - data->sens[nr - 1] = val; - break; - case 2: /* 3904 */ - tmp = w83781d_read_value(client, W83781D_REG_SCFG1); - w83781d_write_value(client, W83781D_REG_SCFG1, - tmp | BIT_SCFG1[nr - 1]); - tmp = w83781d_read_value(client, W83781D_REG_SCFG2); - w83781d_write_value(client, W83781D_REG_SCFG2, - tmp & ~BIT_SCFG2[nr - 1]); - data->sens[nr - 1] = val; - break; - case W83781D_DEFAULT_BETA: /* thermistor */ - tmp = w83781d_read_value(client, W83781D_REG_SCFG1); - w83781d_write_value(client, W83781D_REG_SCFG1, - tmp & ~BIT_SCFG1[nr - 1]); - data->sens[nr - 1] = val; - break; - default: - dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n", - (long) val, W83781D_DEFAULT_BETA); - break; - } - - up(&data->update_lock); - return count; -} - -#define sysfs_sensor(offset) \ -static ssize_t show_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - return show_sensor_reg(dev, buf, offset); \ -} \ -static ssize_t store_regs_sensor_##offset (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - return store_sensor_reg(dev, buf, count, offset); \ -} \ -static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset); - -sysfs_sensor(1); -sysfs_sensor(2); -sysfs_sensor(3); - -#define device_create_file_sensor(client, offset) \ -do { \ -device_create_file(&client->dev, &dev_attr_temp##offset##_type); \ -} while (0) - -/* This function is called when: - * w83781d_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83781d_driver is still present) */ -static int -w83781d_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, w83781d_detect); -} - -/* Assumes that adapter is of I2C, not ISA variety. - * OTHERWISE DON'T CALL THIS - */ -static int -w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, - struct i2c_client *new_client) -{ - int i, val1 = 0, id; - int err; - const char *client_name = ""; - struct w83781d_data *data = i2c_get_clientdata(new_client); - - data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[0])) { - err = -ENOMEM; - goto ERROR_SC_0; - } - memset(data->lm75[0], 0x00, sizeof (struct i2c_client)); - - id = i2c_adapter_id(adapter); - - if (force_subclients[0] == id && force_subclients[1] == address) { - for (i = 2; i <= 3; i++) { - if (force_subclients[i] < 0x48 || - force_subclients[i] > 0x4f) { - dev_err(&new_client->dev, "Invalid subclient " - "address %d; must be 0x48-0x4f\n", - force_subclients[i]); - err = -EINVAL; - goto ERROR_SC_1; - } - } - w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR, - (force_subclients[2] & 0x07) | - ((force_subclients[3] & 0x07) << 4)); - data->lm75[0]->addr = force_subclients[2]; - } else { - val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR); - data->lm75[0]->addr = 0x48 + (val1 & 0x07); - } - - if (kind != w83783s) { - - data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[1])) { - err = -ENOMEM; - goto ERROR_SC_1; - } - memset(data->lm75[1], 0x0, sizeof(struct i2c_client)); - - if (force_subclients[0] == id && - force_subclients[1] == address) { - data->lm75[1]->addr = force_subclients[3]; - } else { - data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07); - } - if (data->lm75[0]->addr == data->lm75[1]->addr) { - dev_err(&new_client->dev, - "Duplicate addresses 0x%x for subclients.\n", - data->lm75[0]->addr); - err = -EBUSY; - goto ERROR_SC_2; - } - } - - if (kind == w83781d) - client_name = "w83781d subclient"; - else if (kind == w83782d) - client_name = "w83782d subclient"; - else if (kind == w83783s) - client_name = "w83783s subclient"; - else if (kind == w83627hf) - client_name = "w83627hf subclient"; - else if (kind == as99127f) - client_name = "as99127f subclient"; - - for (i = 0; i <= 1; i++) { - /* store all data in w83781d */ - i2c_set_clientdata(data->lm75[i], NULL); - data->lm75[i]->adapter = adapter; - data->lm75[i]->driver = &w83781d_driver; - data->lm75[i]->flags = 0; - strlcpy(data->lm75[i]->name, client_name, - I2C_NAME_SIZE); - if ((err = i2c_attach_client(data->lm75[i]))) { - dev_err(&new_client->dev, "Subclient %d " - "registration at address 0x%x " - "failed.\n", i, data->lm75[i]->addr); - if (i == 1) - goto ERROR_SC_3; - goto ERROR_SC_2; - } - if (kind == w83783s) - break; - } - - return 0; - -/* Undo inits in case of errors */ -ERROR_SC_3: - i2c_detach_client(data->lm75[0]); -ERROR_SC_2: - if (NULL != data->lm75[1]) - kfree(data->lm75[1]); -ERROR_SC_1: - if (NULL != data->lm75[0]) - kfree(data->lm75[0]); -ERROR_SC_0: - return err; -} - -static int -w83781d_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i = 0, val1 = 0, val2; - struct i2c_client *new_client; - struct w83781d_data *data; - int err; - const char *client_name = ""; - int is_isa = i2c_is_isa_adapter(adapter); - enum vendor { winbond, asus } vendid; - - if (!is_isa - && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - err = -EINVAL; - goto ERROR0; - } - - /* Prevent users from forcing a kind for a bus it isn't supposed - to possibly be on */ - if (is_isa && (kind == as99127f || kind == w83783s)) { - dev_err(&adapter->dev, - "Cannot force I2C-only chip for ISA address 0x%02x.\n", - address); - err = -EINVAL; - goto ERROR0; - } - - if (is_isa) - if (!request_region(address, W83781D_EXTENT, - w83781d_driver.name)) { - dev_dbg(&adapter->dev, "Request of region " - "0x%x-0x%x for w83781d failed\n", address, - address + W83781D_EXTENT - 1); - err = -EBUSY; - goto ERROR0; - } - - /* Probe whether there is anything available on this address. Already - done for SMBus clients */ - if (kind < 0) { - if (is_isa) { - -#define REALLY_SLOW_IO - /* We need the timeouts for at least some LM78-like - chips. But only if we read 'undefined' registers. */ - i = inb_p(address + 1); - if (inb_p(address + 2) != i - || inb_p(address + 3) != i - || inb_p(address + 7) != i) { - dev_dbg(&adapter->dev, "Detection of w83781d " - "chip failed at step 1\n"); - err = -ENODEV; - goto ERROR1; - } -#undef REALLY_SLOW_IO - - /* Let's just hope nothing breaks here */ - i = inb_p(address + 5) & 0x7f; - outb_p(~i & 0x7f, address + 5); - val2 = inb_p(address + 5) & 0x7f; - if (val2 != (~i & 0x7f)) { - outb_p(i, address + 5); - dev_dbg(&adapter->dev, "Detection of w83781d " - "chip failed at step 2 (0x%x != " - "0x%x at 0x%x)\n", val2, ~i & 0x7f, - address + 5); - err = -ENODEV; - goto ERROR1; - } - } - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83781d_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR1; - } - memset(data, 0, sizeof(struct w83781d_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - init_MUTEX(&data->lock); - new_client->adapter = adapter; - new_client->driver = &w83781d_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - - /* The w8378?d may be stuck in some other bank than bank 0. This may - make reading other information impossible. Specify a force=... or - force_*=... parameter, and the Winbond will be reset to the right - bank. */ - if (kind < 0) { - if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) { - dev_dbg(&new_client->dev, "Detection failed at step " - "3\n"); - err = -ENODEV; - goto ERROR2; - } - val1 = w83781d_read_value(new_client, W83781D_REG_BANK); - val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN); - /* Check for Winbond or Asus ID if in bank 0 */ - if ((!(val1 & 0x07)) && - (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3)) - || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) { - dev_dbg(&new_client->dev, "Detection failed at step " - "4\n"); - err = -ENODEV; - goto ERROR2; - } - /* If Winbond SMBus, check address at 0x48. - Asus doesn't support, except for as99127f rev.2 */ - if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) || - ((val1 & 0x80) && (val2 == 0x5c)))) { - if (w83781d_read_value - (new_client, W83781D_REG_I2C_ADDR) != address) { - dev_dbg(&new_client->dev, "Detection failed " - "at step 5\n"); - err = -ENODEV; - goto ERROR2; - } - } - } - - /* We have either had a force parameter, or we have already detected the - Winbond. Put it now into bank 0 and Vendor ID High Byte */ - w83781d_write_value(new_client, W83781D_REG_BANK, - (w83781d_read_value(new_client, - W83781D_REG_BANK) & 0x78) | - 0x80); - - /* Determine the chip type. */ - if (kind <= 0) { - /* get vendor ID */ - val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN); - if (val2 == 0x5c) - vendid = winbond; - else if (val2 == 0x12) - vendid = asus; - else { - dev_dbg(&new_client->dev, "Chip was made by neither " - "Winbond nor Asus?\n"); - err = -ENODEV; - goto ERROR2; - } - - val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID); - if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond) - kind = w83781d; - else if (val1 == 0x30 && vendid == winbond) - kind = w83782d; - else if (val1 == 0x40 && vendid == winbond && !is_isa - && address == 0x2d) - kind = w83783s; - else if (val1 == 0x21 && vendid == winbond) - kind = w83627hf; - else if (val1 == 0x31 && !is_isa && address >= 0x28) - kind = as99127f; - else { - if (kind == 0) - dev_warn(&new_client->dev, "Ignoring 'force' " - "parameter for unknown chip at " - "adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - err = -EINVAL; - goto ERROR2; - } - } - - if (kind == w83781d) { - client_name = "w83781d"; - } else if (kind == w83782d) { - client_name = "w83782d"; - } else if (kind == w83783s) { - client_name = "w83783s"; - } else if (kind == w83627hf) { - client_name = "w83627hf"; - } else if (kind == as99127f) { - client_name = "as99127f"; - } - - /* Fill in the remaining client fields and put into the global list */ - strlcpy(new_client->name, client_name, I2C_NAME_SIZE); - data->type = kind; - - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto ERROR2; - - /* attach secondary i2c lm75-like clients */ - if (!is_isa) { - if ((err = w83781d_detect_subclients(adapter, address, - kind, new_client))) - goto ERROR3; - } else { - data->lm75[0] = NULL; - data->lm75[1] = NULL; - } - - /* Initialize the chip */ - w83781d_init_client(new_client); - - /* A few vars need to be filled upon startup */ - for (i = 1; i <= 3; i++) { - data->fan_min[i - 1] = w83781d_read_value(new_client, - W83781D_REG_FAN_MIN(i)); - } - if (kind != w83781d && kind != as99127f) - for (i = 0; i < 4; i++) - data->pwmenable[i] = 1; - - /* Register sysfs hooks */ - device_create_file_in(new_client, 0); - if (kind != w83783s) - device_create_file_in(new_client, 1); - device_create_file_in(new_client, 2); - device_create_file_in(new_client, 3); - device_create_file_in(new_client, 4); - device_create_file_in(new_client, 5); - device_create_file_in(new_client, 6); - if (kind != as99127f && kind != w83781d && kind != w83783s) { - device_create_file_in(new_client, 7); - device_create_file_in(new_client, 8); - } - - device_create_file_fan(new_client, 1); - device_create_file_fan(new_client, 2); - device_create_file_fan(new_client, 3); - - device_create_file_temp(new_client, 1); - device_create_file_temp(new_client, 2); - if (kind != w83783s) - device_create_file_temp(new_client, 3); - - device_create_file_vid(new_client); - device_create_file_vrm(new_client); - - device_create_file_fan_div(new_client, 1); - device_create_file_fan_div(new_client, 2); - device_create_file_fan_div(new_client, 3); - - device_create_file_alarms(new_client); - - device_create_file_beep(new_client); - - if (kind != w83781d && kind != as99127f) { - device_create_file_pwm(new_client, 1); - device_create_file_pwm(new_client, 2); - device_create_file_pwmenable(new_client, 2); - } - if (kind == w83782d && !is_isa) { - device_create_file_pwm(new_client, 3); - device_create_file_pwm(new_client, 4); - } - - if (kind != as99127f && kind != w83781d) { - device_create_file_sensor(new_client, 1); - device_create_file_sensor(new_client, 2); - if (kind != w83783s) - device_create_file_sensor(new_client, 3); - } - - return 0; - -ERROR3: - i2c_detach_client(new_client); -ERROR2: - kfree(data); -ERROR1: - if (is_isa) - release_region(address, W83781D_EXTENT); -ERROR0: - return err; -} - -static int -w83781d_detach_client(struct i2c_client *client) -{ - int err; - - if (i2c_is_isa_client(client)) - release_region(client->addr, W83781D_EXTENT); - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Client deregistration failed, client not detached.\n"); - return err; - } - - if (i2c_get_clientdata(client)==NULL) { - /* subclients */ - kfree(client); - } else { - /* main client */ - kfree(i2c_get_clientdata(client)); - } - - return 0; -} - -/* The SMBus locks itself, usually, but nothing may access the Winbond between - bank switches. ISA access must always be locked explicitly! - We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks, - would slow down the W83781D access and should not be necessary. - There are some ugly typecasts here, but the good news is - they should - nowhere else be necessary! */ -static int -w83781d_read_value(struct i2c_client *client, u16 reg) -{ - struct w83781d_data *data = i2c_get_clientdata(client); - int res, word_sized, bank; - struct i2c_client *cl; - - down(&data->lock); - if (i2c_is_isa_client(client)) { - word_sized = (((reg & 0xff00) == 0x100) - || ((reg & 0xff00) == 0x200)) - && (((reg & 0x00ff) == 0x50) - || ((reg & 0x00ff) == 0x53) - || ((reg & 0x00ff) == 0x55)); - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(reg >> 8, - client->addr + W83781D_DATA_REG_OFFSET); - } - outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); - res = inb_p(client->addr + W83781D_DATA_REG_OFFSET); - if (word_sized) { - outb_p((reg & 0xff) + 1, - client->addr + W83781D_ADDR_REG_OFFSET); - res = - (res << 8) + inb_p(client->addr + - W83781D_DATA_REG_OFFSET); - } - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); - } - } else { - bank = (reg >> 8) & 0x0f; - if (bank > 2) - /* switch banks */ - i2c_smbus_write_byte_data(client, W83781D_REG_BANK, - bank); - if (bank == 0 || bank > 2) { - res = i2c_smbus_read_byte_data(client, reg & 0xff); - } else { - /* switch to subclient */ - cl = data->lm75[bank - 1]; - /* convert from ISA to LM75 I2C addresses */ - switch (reg & 0xff) { - case 0x50: /* TEMP */ - res = swab16(i2c_smbus_read_word_data(cl, 0)); - break; - case 0x52: /* CONFIG */ - res = i2c_smbus_read_byte_data(cl, 1); - break; - case 0x53: /* HYST */ - res = swab16(i2c_smbus_read_word_data(cl, 2)); - break; - case 0x55: /* OVER */ - default: - res = swab16(i2c_smbus_read_word_data(cl, 3)); - break; - } - } - if (bank > 2) - i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); - } - up(&data->lock); - return res; -} - -static int -w83781d_write_value(struct i2c_client *client, u16 reg, u16 value) -{ - struct w83781d_data *data = i2c_get_clientdata(client); - int word_sized, bank; - struct i2c_client *cl; - - down(&data->lock); - if (i2c_is_isa_client(client)) { - word_sized = (((reg & 0xff00) == 0x100) - || ((reg & 0xff00) == 0x200)) - && (((reg & 0x00ff) == 0x53) - || ((reg & 0x00ff) == 0x55)); - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(reg >> 8, - client->addr + W83781D_DATA_REG_OFFSET); - } - outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET); - if (word_sized) { - outb_p(value >> 8, - client->addr + W83781D_DATA_REG_OFFSET); - outb_p((reg & 0xff) + 1, - client->addr + W83781D_ADDR_REG_OFFSET); - } - outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET); - if (reg & 0xff00) { - outb_p(W83781D_REG_BANK, - client->addr + W83781D_ADDR_REG_OFFSET); - outb_p(0, client->addr + W83781D_DATA_REG_OFFSET); - } - } else { - bank = (reg >> 8) & 0x0f; - if (bank > 2) - /* switch banks */ - i2c_smbus_write_byte_data(client, W83781D_REG_BANK, - bank); - if (bank == 0 || bank > 2) { - i2c_smbus_write_byte_data(client, reg & 0xff, - value & 0xff); - } else { - /* switch to subclient */ - cl = data->lm75[bank - 1]; - /* convert from ISA to LM75 I2C addresses */ - switch (reg & 0xff) { - case 0x52: /* CONFIG */ - i2c_smbus_write_byte_data(cl, 1, value & 0xff); - break; - case 0x53: /* HYST */ - i2c_smbus_write_word_data(cl, 2, swab16(value)); - break; - case 0x55: /* OVER */ - i2c_smbus_write_word_data(cl, 3, swab16(value)); - break; - } - } - if (bank > 2) - i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); - } - up(&data->lock); - return 0; -} - -/* Called when we have found a new W83781D. It should set limits, etc. */ -static void -w83781d_init_client(struct i2c_client *client) -{ - struct w83781d_data *data = i2c_get_clientdata(client); - int i, p; - int type = data->type; - u8 tmp; - - if (init && type != as99127f) { /* this resets registers we don't have - documentation for on the as99127f */ - /* save these registers */ - i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG); - p = w83781d_read_value(client, W83781D_REG_PWMCLK12); - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others */ - w83781d_write_value(client, W83781D_REG_CONFIG, 0x80); - /* Restore the registers and disable power-on abnormal beep. - This saves FAN 1/2/3 input/output values set by BIOS. */ - w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80); - w83781d_write_value(client, W83781D_REG_PWMCLK12, p); - /* Disable master beep-enable (reset turns it on). - Individual beep_mask should be reset to off but for some reason - disabling this bit helps some people not get beeped */ - w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0); - } - - data->vrm = i2c_which_vrm(); - - if ((type != w83781d) && (type != as99127f)) { - tmp = w83781d_read_value(client, W83781D_REG_SCFG1); - for (i = 1; i <= 3; i++) { - if (!(tmp & BIT_SCFG1[i - 1])) { - data->sens[i - 1] = W83781D_DEFAULT_BETA; - } else { - if (w83781d_read_value - (client, - W83781D_REG_SCFG2) & BIT_SCFG2[i - 1]) - data->sens[i - 1] = 1; - else - data->sens[i - 1] = 2; - } - if (type == w83783s && i == 2) - break; - } - } - - if (init && type != as99127f) { - /* Enable temp2 */ - tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG); - if (tmp & 0x01) { - dev_warn(&client->dev, "Enabling temp2, readings " - "might not make sense\n"); - w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG, - tmp & 0xfe); - } - - /* Enable temp3 */ - if (type != w83783s) { - tmp = w83781d_read_value(client, - W83781D_REG_TEMP3_CONFIG); - if (tmp & 0x01) { - dev_warn(&client->dev, "Enabling temp3, " - "readings might not make sense\n"); - w83781d_write_value(client, - W83781D_REG_TEMP3_CONFIG, tmp & 0xfe); - } - } - - if (type != w83781d) { - /* enable comparator mode for temp2 and temp3 so - alarm indication will work correctly */ - i = w83781d_read_value(client, W83781D_REG_IRQ); - if (!(i & 0x40)) - w83781d_write_value(client, W83781D_REG_IRQ, - i | 0x40); - } - } - - /* Start monitoring */ - w83781d_write_value(client, W83781D_REG_CONFIG, - (w83781d_read_value(client, - W83781D_REG_CONFIG) & 0xf7) - | 0x01); -} - -static struct w83781d_data *w83781d_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83781d_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(dev, "Starting device update\n"); - - for (i = 0; i <= 8; i++) { - if (data->type == w83783s && i == 1) - continue; /* 783S has no in1 */ - data->in[i] = - w83781d_read_value(client, W83781D_REG_IN(i)); - data->in_min[i] = - w83781d_read_value(client, W83781D_REG_IN_MIN(i)); - data->in_max[i] = - w83781d_read_value(client, W83781D_REG_IN_MAX(i)); - if ((data->type != w83782d) - && (data->type != w83627hf) && (i == 6)) - break; - } - for (i = 1; i <= 3; i++) { - data->fan[i - 1] = - w83781d_read_value(client, W83781D_REG_FAN(i)); - data->fan_min[i - 1] = - w83781d_read_value(client, W83781D_REG_FAN_MIN(i)); - } - if (data->type != w83781d && data->type != as99127f) { - for (i = 1; i <= 4; i++) { - data->pwm[i - 1] = - w83781d_read_value(client, - W83781D_REG_PWM(i)); - if ((data->type != w83782d - || i2c_is_isa_client(client)) - && i == 2) - break; - } - /* Only PWM2 can be disabled */ - data->pwmenable[1] = (w83781d_read_value(client, - W83781D_REG_PWMCLK12) & 0x08) >> 3; - } - - data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1)); - data->temp_max = - w83781d_read_value(client, W83781D_REG_TEMP_OVER(1)); - data->temp_max_hyst = - w83781d_read_value(client, W83781D_REG_TEMP_HYST(1)); - data->temp_add[0] = - w83781d_read_value(client, W83781D_REG_TEMP(2)); - data->temp_max_add[0] = - w83781d_read_value(client, W83781D_REG_TEMP_OVER(2)); - data->temp_max_hyst_add[0] = - w83781d_read_value(client, W83781D_REG_TEMP_HYST(2)); - if (data->type != w83783s) { - data->temp_add[1] = - w83781d_read_value(client, W83781D_REG_TEMP(3)); - data->temp_max_add[1] = - w83781d_read_value(client, - W83781D_REG_TEMP_OVER(3)); - data->temp_max_hyst_add[1] = - w83781d_read_value(client, - W83781D_REG_TEMP_HYST(3)); - } - i = w83781d_read_value(client, W83781D_REG_VID_FANDIV); - data->vid = i & 0x0f; - data->vid |= (w83781d_read_value(client, - W83781D_REG_CHIPID) & 0x01) << 4; - data->fan_div[0] = (i >> 4) & 0x03; - data->fan_div[1] = (i >> 6) & 0x03; - data->fan_div[2] = (w83781d_read_value(client, - W83781D_REG_PIN) >> 6) & 0x03; - if ((data->type != w83781d) && (data->type != as99127f)) { - i = w83781d_read_value(client, W83781D_REG_VBAT); - data->fan_div[0] |= (i >> 3) & 0x04; - data->fan_div[1] |= (i >> 4) & 0x04; - data->fan_div[2] |= (i >> 5) & 0x04; - } - data->alarms = - w83781d_read_value(client, - W83781D_REG_ALARM1) + - (w83781d_read_value(client, W83781D_REG_ALARM2) << 8); - if ((data->type == w83782d) || (data->type == w83627hf)) { - data->alarms |= - w83781d_read_value(client, - W83781D_REG_ALARM3) << 16; - } - i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2); - data->beep_enable = i >> 7; - data->beep_mask = ((i & 0x7f) << 8) + - w83781d_read_value(client, W83781D_REG_BEEP_INTS1); - if ((data->type != w83781d) && (data->type != as99127f)) { - data->beep_mask |= - w83781d_read_value(client, - W83781D_REG_BEEP_INTS3) << 16; - } - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init -sensors_w83781d_init(void) -{ - return i2c_add_driver(&w83781d_driver); -} - -static void __exit -sensors_w83781d_exit(void) -{ - i2c_del_driver(&w83781d_driver); -} - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " - "Philip Edelbrock <phil@netroedge.com>, " - "and Mark Studebaker <mdsxyz123@yahoo.com>"); -MODULE_DESCRIPTION("W83781D driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_w83781d_init); -module_exit(sensors_w83781d_exit); diff --git a/drivers/i2c/chips/w83l785ts.c b/drivers/i2c/chips/w83l785ts.c deleted file mode 100644 index 4469d52aba4c..000000000000 --- a/drivers/i2c/chips/w83l785ts.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> - * - * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made - * by Winbond. It reports a single external temperature with a 1 deg - * resolution and a 3 deg accuracy. Datasheet can be obtained from - * Winbond's website at: - * http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf - * - * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare - * <khali@linux-fr.org>. - * - * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read - * error handling mechanism. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - -/* How many retries on register read error */ -#define MAX_RETRIES 5 - -/* - * Address to scan - * Address is fully defined internally and cannot be changed. - */ - -static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* - * Insmod parameters - */ - -SENSORS_INSMOD_1(w83l785ts); - -/* - * The W83L785TS-S registers - * Manufacturer ID is 0x5CA3 for Winbond. - */ - -#define W83L785TS_REG_MAN_ID1 0x4D -#define W83L785TS_REG_MAN_ID2 0x4C -#define W83L785TS_REG_CHIP_ID 0x4E -#define W83L785TS_REG_CONFIG 0x40 -#define W83L785TS_REG_TYPE 0x52 -#define W83L785TS_REG_TEMP 0x27 -#define W83L785TS_REG_TEMP_OVER 0x53 /* not sure about this one */ - -/* - * Conversions - * The W83L785TS-S uses signed 8-bit values. - */ - -#define TEMP_FROM_REG(val) ((val & 0x80 ? val-0x100 : val) * 1000) - -/* - * Functions declaration - */ - -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter); -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, - int kind); -static int w83l785ts_detach_client(struct i2c_client *client); -static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval); -static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver w83l785ts_driver = { - .owner = THIS_MODULE, - .name = "w83l785ts", - .id = I2C_DRIVERID_W83L785TS, - .flags = I2C_DF_NOTIFY, - .attach_adapter = w83l785ts_attach_adapter, - .detach_client = w83l785ts_detach_client, -}; - -/* - * Client data (each client gets its own) - */ - -struct w83l785ts_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* zero until following fields are valid */ - unsigned long last_updated; /* in jiffies */ - - /* registers values */ - u8 temp, temp_over; -}; - -/* - * Sysfs stuff - */ - -static ssize_t show_temp(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); -} - -static ssize_t show_temp_over(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct w83l785ts_data *data = w83l785ts_update_device(dev); - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); -} - -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); -static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_over, NULL); - -/* - * Real code - */ - -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, w83l785ts_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct w83l785ts_data *data; - int err = 0; - - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kmalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct w83l785ts_data)); - - - /* The common I2C client data is placed right before the - * W83L785TS-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &w83l785ts_driver; - new_client->flags = 0; - - /* - * Now we do the remaining detection. A negative kind means that - * the driver was loaded with no force parameter (default), so we - * must both detect and identify the chip (actually there is only - * one possible kind of chip for now, W83L785TS-S). A zero kind means - * that the driver was loaded with the force parameter, the detection - * step shall be skipped. A positive kind means that the driver - * was loaded with the force parameter and a given kind of chip is - * requested, so both the detection and the identification steps - * are skipped. - */ - if (kind < 0) { /* detection */ - if (((w83l785ts_read_value(new_client, - W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00) - || ((w83l785ts_read_value(new_client, - W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) { - dev_dbg(&adapter->dev, - "W83L785TS-S detection failed at 0x%02x.\n", - address); - goto exit_free; - } - } - - if (kind <= 0) { /* identification */ - u16 man_id; - u8 chip_id; - - man_id = (w83l785ts_read_value(new_client, - W83L785TS_REG_MAN_ID1, 0) << 8) + - w83l785ts_read_value(new_client, - W83L785TS_REG_MAN_ID2, 0); - chip_id = w83l785ts_read_value(new_client, - W83L785TS_REG_CHIP_ID, 0); - - if (man_id == 0x5CA3) { /* Winbond */ - if (chip_id == 0x70) { /* W83L785TS-S */ - kind = w83l785ts; - } - } - - if (kind <= 0) { /* identification failed */ - dev_info(&adapter->dev, - "Unsupported chip (man_id=0x%04X, " - "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; - } - } - - /* We can fill in the remaining client fields. */ - strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Default values in case the first read fails (unlikely). */ - data->temp_over = data->temp = 0; - - /* Tell the I2C layer a new client has arrived. */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - - /* - * Initialize the W83L785TS chip - * Nothing yet, assume it is already started. - */ - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - - return 0; - -exit_free: - kfree(data); -exit: - return err; -} - -static int w83l785ts_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) -{ - int value, i; - - /* Frequent read errors have been reported on Asus boards, so we - * retry on read errors. If it still fails (unlikely), return the - * default value requested by the caller. */ - for (i = 1; i <= MAX_RETRIES; i++) { - value = i2c_smbus_read_byte_data(client, reg); - if (value >= 0) { - dev_dbg(&client->dev, "Read 0x%02x from register " - "0x%02x.\n", value, reg); - return value; - } - dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i); - msleep(i); - } - - dev_err(&client->dev, "Couldn't read value from register 0x%02x. " - "Please report.\n", reg); - return defval; -} - -static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct w83l785ts_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { - dev_dbg(&client->dev, "Updating w83l785ts data.\n"); - data->temp = w83l785ts_read_value(client, - W83L785TS_REG_TEMP, data->temp); - data->temp_over = w83l785ts_read_value(client, - W83L785TS_REG_TEMP_OVER, data->temp_over); - - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_w83l785ts_init(void) -{ - return i2c_add_driver(&w83l785ts_driver); -} - -static void __exit sensors_w83l785ts_exit(void) -{ - i2c_del_driver(&w83l785ts_driver); -} - -MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); -MODULE_DESCRIPTION("W83L785TS-S driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_w83l785ts_init); -module_exit(sensors_w83l785ts_exit); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 51ce268998cd..4fd4f52c8e9b 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -156,7 +156,7 @@ int i2c_add_adapter(struct i2c_adapter *adap) goto out_unlock; } - res = idr_get_new(&i2c_adapter_idr, NULL, &id); + res = idr_get_new(&i2c_adapter_idr, adap, &id); if (res < 0) { if (res == -EAGAIN) res = -ENOMEM; @@ -765,20 +765,15 @@ int i2c_adapter_id(struct i2c_adapter *adap) struct i2c_adapter* i2c_get_adapter(int id) { - struct list_head *item; struct i2c_adapter *adapter; down(&core_lists); - list_for_each(item,&adapters) { - adapter = list_entry(item, struct i2c_adapter, list); - if (id == adapter->nr && - try_module_get(adapter->owner)) { - up(&core_lists); - return adapter; - } - } + adapter = (struct i2c_adapter *)idr_find(&i2c_adapter_idr, id); + if (adapter && !try_module_get(adapter->owner)) + adapter = NULL; + up(&core_lists); - return NULL; + return adapter; } void i2c_put_adapter(struct i2c_adapter *adap) |