summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/sis5513.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/sis5513.c')
-rw-r--r--drivers/ide/pci/sis5513.c253
1 files changed, 128 insertions, 125 deletions
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 512bb4c1fd5c..4b0b85d8faf5 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -59,10 +59,10 @@
#define ATA_16 0x01
#define ATA_33 0x02
#define ATA_66 0x03
-#define ATA_100a 0x04 // SiS730/SiS550 is ATA100 with ATA66 layout
+#define ATA_100a 0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */
#define ATA_100 0x05
-#define ATA_133a 0x06 // SiS961b with 133 support
-#define ATA_133 0x07 // SiS962/963
+#define ATA_133a 0x06 /* SiS961b with 133 support */
+#define ATA_133 0x07 /* SiS962/963 */
static u8 chipset_family;
@@ -111,69 +111,70 @@ static const struct {
Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
-static u8 cycle_time_offset[] = {0,0,5,4,4,0,0};
-static u8 cycle_time_range[] = {0,0,2,3,3,4,4};
+static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 };
+static u8 cycle_time_range[] = { 0, 0, 2, 3, 3, 4, 4 };
static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
- {0,0,0,0,0,0,0}, /* no udma */
- {0,0,0,0,0,0,0}, /* no udma */
- {3,2,1,0,0,0,0}, /* ATA_33 */
- {7,5,3,2,1,0,0}, /* ATA_66 */
- {7,5,3,2,1,0,0}, /* ATA_100a (730 specific), differences are on cycle_time range and offset */
- {11,7,5,4,2,1,0}, /* ATA_100 */
- {15,10,7,5,3,2,1}, /* ATA_133a (earliest 691 southbridges) */
- {15,10,7,5,3,2,1}, /* ATA_133 */
+ { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
+ { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
+ { 3, 2, 1, 0, 0, 0, 0 }, /* ATA_33 */
+ { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_66 */
+ { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific),
+ different cycle_time range and offset */
+ { 11, 7, 5, 4, 2, 1, 0 }, /* ATA_100 */
+ { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */
+ { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */
};
/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
See SiS962 data sheet for more detail */
static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
- {0,0,0,0,0,0,0}, /* no udma */
- {0,0,0,0,0,0,0}, /* no udma */
- {2,1,1,0,0,0,0},
- {4,3,2,1,0,0,0},
- {4,3,2,1,0,0,0},
- {6,4,3,1,1,1,0},
- {9,6,4,2,2,2,2},
- {9,6,4,2,2,2,2},
+ { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
+ { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
+ { 2, 1, 1, 0, 0, 0, 0 },
+ { 4, 3, 2, 1, 0, 0, 0 },
+ { 4, 3, 2, 1, 0, 0, 0 },
+ { 6, 4, 3, 1, 1, 1, 0 },
+ { 9, 6, 4, 2, 2, 2, 2 },
+ { 9, 6, 4, 2, 2, 2, 2 },
};
/* Initialize time, Active time, Recovery time vary across
IDE clock settings. These 3 arrays hold the register value
for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
static u8 ini_time_value[][8] = {
- {0,0,0,0,0,0,0,0},
- {0,0,0,0,0,0,0,0},
- {2,1,0,0,0,1,0,0},
- {4,3,1,1,1,3,1,1},
- {4,3,1,1,1,3,1,1},
- {6,4,2,2,2,4,2,2},
- {9,6,3,3,3,6,3,3},
- {9,6,3,3,3,6,3,3},
+ { 0, 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0, 0 },
+ { 2, 1, 0, 0, 0, 1, 0, 0 },
+ { 4, 3, 1, 1, 1, 3, 1, 1 },
+ { 4, 3, 1, 1, 1, 3, 1, 1 },
+ { 6, 4, 2, 2, 2, 4, 2, 2 },
+ { 9, 6, 3, 3, 3, 6, 3, 3 },
+ { 9, 6, 3, 3, 3, 6, 3, 3 },
};
static u8 act_time_value[][8] = {
- {0,0,0,0,0,0,0,0},
- {0,0,0,0,0,0,0,0},
- {9,9,9,2,2,7,2,2},
- {19,19,19,5,4,14,5,4},
- {19,19,19,5,4,14,5,4},
- {28,28,28,7,6,21,7,6},
- {38,38,38,10,9,28,10,9},
- {38,38,38,10,9,28,10,9},
+ { 0, 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0, 0 },
+ { 9, 9, 9, 2, 2, 7, 2, 2 },
+ { 19, 19, 19, 5, 4, 14, 5, 4 },
+ { 19, 19, 19, 5, 4, 14, 5, 4 },
+ { 28, 28, 28, 7, 6, 21, 7, 6 },
+ { 38, 38, 38, 10, 9, 28, 10, 9 },
+ { 38, 38, 38, 10, 9, 28, 10, 9 },
};
static u8 rco_time_value[][8] = {
- {0,0,0,0,0,0,0,0},
- {0,0,0,0,0,0,0,0},
- {9,2,0,2,0,7,1,1},
- {19,5,1,5,2,16,3,2},
- {19,5,1,5,2,16,3,2},
- {30,9,3,9,4,25,6,4},
- {40,12,4,12,5,34,12,5},
- {40,12,4,12,5,34,12,5},
+ { 0, 0, 0, 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 0, 0, 0, 0 },
+ { 9, 2, 0, 2, 0, 7, 1, 1 },
+ { 19, 5, 1, 5, 2, 16, 3, 2 },
+ { 19, 5, 1, 5, 2, 16, 3, 2 },
+ { 30, 9, 3, 9, 4, 25, 6, 4 },
+ { 40, 12, 4, 12, 5, 34, 12, 5 },
+ { 40, 12, 4, 12, 5, 34, 12, 5 },
};
/*
* Printing configuration
*/
/* Used for chipset type printing at boot time */
-static char* chipset_capability[] = {
+static char *chipset_capability[] = {
"ATA", "ATA 16",
"ATA 33", "ATA 66",
"ATA 100 (1st gen)", "ATA 100 (2nd gen)",
@@ -272,7 +273,7 @@ static void sis_program_timings(ide_drive_t *drive, const u8 mode)
sis_ata133_program_timings(drive, mode);
}
-static void config_drive_art_rwp (ide_drive_t *drive)
+static void config_drive_art_rwp(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -346,7 +347,7 @@ static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
sis_program_timings(drive, speed);
}
-static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
+static u8 sis_ata133_udma_filter(ide_drive_t *drive)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 regdw = 0;
@@ -358,8 +359,7 @@ static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
}
-/* Chip detection and general config */
-static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
+static int __devinit sis_find_family(struct pci_dev *dev)
{
struct pci_dev *host;
int i = 0;
@@ -381,7 +381,7 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
chipset_family = ATA_100a;
}
pci_dev_put(host);
-
+
printk(KERN_INFO "SIS5513: %s %s controller\n",
SiSHostChipInfo[i].name, chipset_capability[chipset_family]);
}
@@ -440,63 +440,60 @@ static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const c
}
}
- if (!chipset_family)
- return -1;
+ return chipset_family;
+}
+static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev,
+ const char *name)
+{
/* Make general config ops here
1/ tell IDE channels to operate in Compatibility mode only
2/ tell old chips to allow per drive IDE timings */
- {
- u8 reg;
- u16 regw;
-
- switch(chipset_family) {
- case ATA_133:
- /* SiS962 operation mode */
- pci_read_config_word(dev, 0x50, &regw);
- if (regw & 0x08)
- pci_write_config_word(dev, 0x50, regw&0xfff7);
- pci_read_config_word(dev, 0x52, &regw);
- if (regw & 0x08)
- pci_write_config_word(dev, 0x52, regw&0xfff7);
- break;
- case ATA_133a:
- case ATA_100:
- /* Fixup latency */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
- /* Set compatibility bit */
- pci_read_config_byte(dev, 0x49, &reg);
- if (!(reg & 0x01)) {
- pci_write_config_byte(dev, 0x49, reg|0x01);
- }
- break;
- case ATA_100a:
- case ATA_66:
- /* Fixup latency */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
-
- /* On ATA_66 chips the bit was elsewhere */
- pci_read_config_byte(dev, 0x52, &reg);
- if (!(reg & 0x04)) {
- pci_write_config_byte(dev, 0x52, reg|0x04);
- }
- break;
- case ATA_33:
- /* On ATA_33 we didn't have a single bit to set */
- pci_read_config_byte(dev, 0x09, &reg);
- if ((reg & 0x0f) != 0x00) {
- pci_write_config_byte(dev, 0x09, reg&0xf0);
- }
- case ATA_16:
- /* force per drive recovery and active timings
- needed on ATA_33 and below chips */
- pci_read_config_byte(dev, 0x52, &reg);
- if (!(reg & 0x08)) {
- pci_write_config_byte(dev, 0x52, reg|0x08);
- }
- break;
- }
+ u8 reg;
+ u16 regw;
+
+ switch (chipset_family) {
+ case ATA_133:
+ /* SiS962 operation mode */
+ pci_read_config_word(dev, 0x50, &regw);
+ if (regw & 0x08)
+ pci_write_config_word(dev, 0x50, regw&0xfff7);
+ pci_read_config_word(dev, 0x52, &regw);
+ if (regw & 0x08)
+ pci_write_config_word(dev, 0x52, regw&0xfff7);
+ break;
+ case ATA_133a:
+ case ATA_100:
+ /* Fixup latency */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
+ /* Set compatibility bit */
+ pci_read_config_byte(dev, 0x49, &reg);
+ if (!(reg & 0x01))
+ pci_write_config_byte(dev, 0x49, reg|0x01);
+ break;
+ case ATA_100a:
+ case ATA_66:
+ /* Fixup latency */
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
+
+ /* On ATA_66 chips the bit was elsewhere */
+ pci_read_config_byte(dev, 0x52, &reg);
+ if (!(reg & 0x04))
+ pci_write_config_byte(dev, 0x52, reg|0x04);
+ break;
+ case ATA_33:
+ /* On ATA_33 we didn't have a single bit to set */
+ pci_read_config_byte(dev, 0x09, &reg);
+ if ((reg & 0x0f) != 0x00)
+ pci_write_config_byte(dev, 0x09, reg&0xf0);
+ case ATA_16:
+ /* force per drive recovery and active timings
+ needed on ATA_33 and below chips */
+ pci_read_config_byte(dev, 0x52, &reg);
+ if (!(reg & 0x08))
+ pci_write_config_byte(dev, 0x52, reg|0x08);
+ break;
}
return 0;
@@ -517,7 +514,7 @@ static const struct sis_laptop sis_laptop[] = {
{ 0, }
};
-static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
+static u8 __devinit sis_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *pdev = to_pci_dev(hwif->dev);
const struct sis_laptop *lap = &sis_laptop[0];
@@ -546,38 +543,44 @@ static u8 __devinit ata66_sis5513(ide_hwif_t *hwif)
return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
}
-static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
-{
- u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
-
- hwif->set_pio_mode = &sis_set_pio_mode;
- hwif->set_dma_mode = &sis_set_dma_mode;
-
- if (chipset_family >= ATA_133)
- hwif->udma_filter = sis5513_ata133_udma_filter;
-
- hwif->cable_detect = ata66_sis5513;
-
- if (hwif->dma_base == 0)
- return;
+static const struct ide_port_ops sis_port_ops = {
+ .set_pio_mode = sis_set_pio_mode,
+ .set_dma_mode = sis_set_dma_mode,
+ .cable_detect = sis_cable_detect,
+};
- hwif->ultra_mask = udma_rates[chipset_family];
-}
+static const struct ide_port_ops sis_ata133_port_ops = {
+ .set_pio_mode = sis_set_pio_mode,
+ .set_dma_mode = sis_set_dma_mode,
+ .udma_filter = sis_ata133_udma_filter,
+ .cable_detect = sis_cable_detect,
+};
static const struct ide_port_info sis5513_chipset __devinitdata = {
.name = "SIS5513",
.init_chipset = init_chipset_sis5513,
- .init_hwif = init_hwif_sis5513,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA |
- IDE_HFLAG_BOOTABLE,
+ .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
+ .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
};
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &sis5513_chipset);
+ struct ide_port_info d = sis5513_chipset;
+ u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
+
+ if (sis_find_family(dev) == 0)
+ return -ENOTSUPP;
+
+ if (chipset_family >= ATA_133)
+ d.port_ops = &sis_ata133_port_ops;
+ else
+ d.port_ops = &sis_port_ops;
+
+ d.udma_mask = udma_rates[chipset_family];
+
+ return ide_setup_pci_device(dev, &d);
}
static const struct pci_device_id sis5513_pci_tbl[] = {
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 19:51:57 +0100