diff options
Diffstat (limited to 'drivers/ieee1394')
| -rw-r--r-- | drivers/ieee1394/ieee1394_core.c | 4 | ||||
| -rw-r--r-- | drivers/ieee1394/ohci1394.c | 11 | ||||
| -rw-r--r-- | drivers/ieee1394/pcilynx.c | 20 | ||||
| -rw-r--r-- | drivers/ieee1394/sbp2.c | 1 |
4 files changed, 12 insertions, 24 deletions
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index b248d89de8b4..d633770fac8e 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -681,7 +681,7 @@ static void handle_packet_response(struct hpsb_host *host, int tcode, return; } - __skb_unlink(skb, skb->list); + __skb_unlink(skb, &host->pending_packet_queue); if (packet->state == hpsb_queued) { packet->sendtime = jiffies; @@ -989,7 +989,7 @@ void abort_timedouts(unsigned long __opaque) packet = (struct hpsb_packet *)skb->data; if (time_before(packet->sendtime + expire, jiffies)) { - __skb_unlink(skb, skb->list); + __skb_unlink(skb, &host->pending_packet_queue); packet->state = hpsb_complete; packet->ack_code = ACKX_TIMEOUT; queue_packet_complete(packet); diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index a485f47bb21e..27018c8efc24 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -478,7 +478,6 @@ static void ohci_initialize(struct ti_ohci *ohci) int num_ports, i; spin_lock_init(&ohci->phy_reg_lock); - spin_lock_init(&ohci->event_lock); /* Put some defaults to these undefined bus options */ buf = reg_read(ohci, OHCI1394_BusOptions); @@ -1084,7 +1083,8 @@ static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg) initialize_dma_rcv_ctx(&ohci->ir_legacy_context, 1); - PRINT(KERN_ERR, "IR legacy activated"); + if (printk_ratelimit()) + PRINT(KERN_ERR, "IR legacy activated"); } spin_lock_irqsave(&ohci->IR_channel_lock, flags); @@ -3401,7 +3401,14 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev, /* We hopefully don't have to pre-allocate IT DMA like we did * for IR DMA above. Allocate it on-demand and mark inactive. */ ohci->it_legacy_context.ohci = NULL; + spin_lock_init(&ohci->event_lock); + /* + * interrupts are disabled, all right, but... due to SA_SHIRQ we + * might get called anyway. We'll see no event, of course, but + * we need to get to that "no event", so enough should be initialized + * by that point. + */ if (request_irq(dev->irq, ohci_irq_handler, SA_SHIRQ, OHCI1394_DRIVER_NAME, ohci)) FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq); diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index 36074e6eeebb..6b1ab875333b 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1464,26 +1464,6 @@ static int __devinit add_card(struct pci_dev *dev, { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block } }; - -#ifdef CONFIG_IEEE1394_VERBOSEDEBUG - union i2c_smbus_data data; - - if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE,NULL)) - PRINT(KERN_ERR, lynx->id,"eeprom read start has failed"); - else - { - u16 addr; - for (addr=0x00; addr < 0x100; addr++) { - if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE,& data)) { - PRINT(KERN_ERR, lynx->id, "unable to read i2c %x", addr); - break; - } - else - PRINT(KERN_DEBUG, lynx->id,"got serial eeprom data at %x: %x",addr, data.byte); - } - } -#endif - /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we do it more efficiently in one transaction rather then using several reads */ if (i2c_transfer(i2c_ad, msg, 2) < 0) { diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index fe3e1703fa61..627af507643a 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -169,6 +169,7 @@ MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table); * Debug levels, configured via kernel config, or enable here. */ +#define CONFIG_IEEE1394_SBP2_DEBUG 0 /* #define CONFIG_IEEE1394_SBP2_DEBUG_ORBS */ /* #define CONFIG_IEEE1394_SBP2_DEBUG_DMA */ /* #define CONFIG_IEEE1394_SBP2_DEBUG 1 */ |