diff options
Diffstat (limited to 'drivers/iio/adc/ad7192.c')
-rw-r--r-- | drivers/iio/adc/ad7192.c | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c index adc3cbe92d6e..7bcc7e2aa2a2 100644 --- a/drivers/iio/adc/ad7192.c +++ b/drivers/iio/adc/ad7192.c @@ -17,7 +17,9 @@ #include <linux/err.h> #include <linux/sched.h> #include <linux/delay.h> -#include <linux/of.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/property.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -364,19 +366,19 @@ static inline bool ad7192_valid_external_frequency(u32 freq) freq <= AD7192_EXT_FREQ_MHZ_MAX); } -static int ad7192_of_clock_select(struct ad7192_state *st) +static int ad7192_clock_select(struct ad7192_state *st) { - struct device_node *np = st->sd.spi->dev.of_node; + struct device *dev = &st->sd.spi->dev; unsigned int clock_sel; clock_sel = AD7192_CLK_INT; /* use internal clock */ if (!st->mclk) { - if (of_property_read_bool(np, "adi,int-clock-output-enable")) + if (device_property_read_bool(dev, "adi,int-clock-output-enable")) clock_sel = AD7192_CLK_INT_CO; } else { - if (of_property_read_bool(np, "adi,clock-xtal")) + if (device_property_read_bool(dev, "adi,clock-xtal")) clock_sel = AD7192_CLK_EXT_MCLK1_2; else clock_sel = AD7192_CLK_EXT_MCLK2; @@ -385,7 +387,7 @@ static int ad7192_of_clock_select(struct ad7192_state *st) return clock_sel; } -static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) +static int ad7192_setup(struct iio_dev *indio_dev, struct device *dev) { struct ad7192_state *st = iio_priv(indio_dev); bool rej60_en, refin2_en; @@ -407,7 +409,7 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) id = FIELD_GET(AD7192_ID_MASK, id); if (id != st->chip_info->chip_id) - dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n", + dev_warn(dev, "device ID query failed (0x%X != 0x%X)\n", id, st->chip_info->chip_id); st->mode = FIELD_PREP(AD7192_MODE_SEL_MASK, AD7192_MODE_IDLE) | @@ -416,30 +418,30 @@ static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np) st->conf = FIELD_PREP(AD7192_CONF_GAIN_MASK, 0); - rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable"); + rej60_en = device_property_read_bool(dev, "adi,rejection-60-Hz-enable"); if (rej60_en) st->mode |= AD7192_MODE_REJ60; - refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable"); + refin2_en = device_property_read_bool(dev, "adi,refin2-pins-enable"); if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195) st->conf |= AD7192_CONF_REFSEL; st->conf &= ~AD7192_CONF_CHOP; - buf_en = of_property_read_bool(np, "adi,buffer-enable"); + buf_en = device_property_read_bool(dev, "adi,buffer-enable"); if (buf_en) st->conf |= AD7192_CONF_BUF; - bipolar = of_property_read_bool(np, "bipolar"); + bipolar = device_property_read_bool(dev, "bipolar"); if (!bipolar) st->conf |= AD7192_CONF_UNIPOLAR; - burnout_curr_en = of_property_read_bool(np, - "adi,burnout-currents-enable"); + burnout_curr_en = device_property_read_bool(dev, + "adi,burnout-currents-enable"); if (burnout_curr_en && buf_en) { st->conf |= AD7192_CONF_BURN; } else if (burnout_curr_en) { - dev_warn(&st->sd.spi->dev, + dev_warn(dev, "Can't enable burnout currents: see CHOP or buffer\n"); } @@ -1117,9 +1119,7 @@ static int ad7192_probe(struct spi_device *spi) } st->int_vref_mv = ret / 1000; - st->chip_info = of_device_get_match_data(&spi->dev); - if (!st->chip_info) - st->chip_info = (void *)spi_get_device_id(spi)->driver_data; + st->chip_info = spi_get_device_match_data(spi); indio_dev->name = st->chip_info->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = st->chip_info->channels; @@ -1140,7 +1140,7 @@ static int ad7192_probe(struct spi_device *spi) if (IS_ERR(st->mclk)) return PTR_ERR(st->mclk); - st->clock_sel = ad7192_of_clock_select(st); + st->clock_sel = ad7192_clock_select(st); if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 || st->clock_sel == AD7192_CLK_EXT_MCLK2) { @@ -1152,7 +1152,7 @@ static int ad7192_probe(struct spi_device *spi) } } - ret = ad7192_setup(indio_dev, spi->dev.of_node); + ret = ad7192_setup(indio_dev, &spi->dev); if (ret) return ret; |