diff options
Diffstat (limited to 'drivers/iio')
69 files changed, 2857 insertions, 816 deletions
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index 505e921f0b19..6743b18194fb 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -46,6 +46,14 @@ config IIO_CONSUMERS_PER_TRIGGER This value controls the maximum number of consumers that a given trigger may handle. Default is 2. +config IIO_SW_DEVICE + tristate "Enable software IIO device support" + select IIO_CONFIGFS + help + Provides IIO core support for software devices. A software + device can be created via configfs or directly by a driver + using the API provided. + config IIO_SW_TRIGGER tristate "Enable software triggers support" select IIO_CONFIGFS diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index 20f649073462..87e4c4369e2f 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -8,6 +8,7 @@ industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o obj-$(CONFIG_IIO_CONFIGFS) += industrialio-configfs.o +obj-$(CONFIG_IIO_SW_DEVICE) += industrialio-sw-device.o obj-$(CONFIG_IIO_SW_TRIGGER) += industrialio-sw-trigger.o obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index e4a758cd7d35..89d78208de3f 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -17,6 +17,16 @@ config BMA180 To compile this driver as a module, choose M here: the module will be called bma180. +config BMA220 + tristate "Bosch BMA220 3-Axis Accelerometer Driver" + depends on SPI + help + Say yes here to add support for the Bosch BMA220 triaxial + acceleration sensor. + + To compile this driver as a module, choose M here: the + module will be called bma220_spi. + config BMC150_ACCEL tristate "Bosch BMC150 Accelerometer Driver" select IIO_BUFFER @@ -136,13 +146,23 @@ config MMA7455_SPI To compile this driver as a module, choose M here: the module will be called mma7455_spi. +config MMA7660 + tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver" + depends on I2C + help + Say yes here to get support for the Freescale MMA7660FC 3-Axis + accelerometer. + + Choosing M will build the driver as a module. If so, the module + will be called mma7660. + config MMA8452 - tristate "Freescale MMA8452Q and similar Accelerometers Driver" + tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to build support for the following Freescale 3-axis + Say yes here to build support for the following Freescale / NXP 3-axis accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC, FXLS8471Q. diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 71b6794de885..6cedbecca2ee 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMA180) += bma180.o +obj-$(CONFIG_BMA220) += bma220_spi.o obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o @@ -15,6 +16,8 @@ obj-$(CONFIG_MMA7455) += mma7455_core.o obj-$(CONFIG_MMA7455_I2C) += mma7455_i2c.o obj-$(CONFIG_MMA7455_SPI) += mma7455_spi.o +obj-$(CONFIG_MMA7660) += mma7660.o + obj-$(CONFIG_MMA8452) += mma8452.o obj-$(CONFIG_MMA9551_CORE) += mma9551_core.o diff --git a/drivers/iio/accel/bma220_spi.c b/drivers/iio/accel/bma220_spi.c new file mode 100644 index 000000000000..1098d10df8e8 --- /dev/null +++ b/drivers/iio/accel/bma220_spi.c @@ -0,0 +1,338 @@ +/** + * BMA220 Digital triaxial acceleration sensor driver + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ + +#include <linux/acpi.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/spi/spi.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define BMA220_REG_ID 0x00 +#define BMA220_REG_ACCEL_X 0x02 +#define BMA220_REG_ACCEL_Y 0x03 +#define BMA220_REG_ACCEL_Z 0x04 +#define BMA220_REG_RANGE 0x11 +#define BMA220_REG_SUSPEND 0x18 + +#define BMA220_CHIP_ID 0xDD +#define BMA220_READ_MASK 0x80 +#define BMA220_RANGE_MASK 0x03 +#define BMA220_DATA_SHIFT 2 +#define BMA220_SUSPEND_SLEEP 0xFF +#define BMA220_SUSPEND_WAKE 0x00 + +#define BMA220_DEVICE_NAME "bma220" +#define BMA220_SCALE_AVAILABLE "0.623 1.248 2.491 4.983" + +#define BMA220_ACCEL_CHANNEL(index, reg, axis) { \ + .type = IIO_ACCEL, \ + .address = reg, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 6, \ + .storagebits = 8, \ + .shift = BMA220_DATA_SHIFT, \ + .endianness = IIO_CPU, \ + }, \ +} + +enum bma220_axis { + AXIS_X, + AXIS_Y, + AXIS_Z, +}; + +static IIO_CONST_ATTR(in_accel_scale_available, BMA220_SCALE_AVAILABLE); + +static struct attribute *bma220_attributes[] = { + &iio_const_attr_in_accel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bma220_attribute_group = { + .attrs = bma220_attributes, +}; + +static const int bma220_scale_table[][4] = { + {0, 623000}, {1, 248000}, {2, 491000}, {4, 983000} +}; + +struct bma220_data { + struct spi_device *spi_device; + struct mutex lock; + s8 buffer[16]; /* 3x8-bit channels + 5x8 padding + 8x8 timestamp */ + u8 tx_buf[2] ____cacheline_aligned; +}; + +static const struct iio_chan_spec bma220_channels[] = { + BMA220_ACCEL_CHANNEL(0, BMA220_REG_ACCEL_X, X), + BMA220_ACCEL_CHANNEL(1, BMA220_REG_ACCEL_Y, Y), + BMA220_ACCEL_CHANNEL(2, BMA220_REG_ACCEL_Z, Z), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static inline int bma220_read_reg(struct spi_device *spi, u8 reg) +{ + return spi_w8r8(spi, reg | BMA220_READ_MASK); +} + +static const unsigned long bma220_accel_scan_masks[] = { + BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z), + 0 +}; + +static irqreturn_t bma220_trigger_handler(int irq, void *p) +{ + int ret; + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct bma220_data *data = iio_priv(indio_dev); + struct spi_device *spi = data->spi_device; + + mutex_lock(&data->lock); + data->tx_buf[0] = BMA220_REG_ACCEL_X | BMA220_READ_MASK; + ret = spi_write_then_read(spi, data->tx_buf, 1, data->buffer, + ARRAY_SIZE(bma220_channels) - 1); + if (ret < 0) + goto err; + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + pf->timestamp); +err: + mutex_unlock(&data->lock); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static int bma220_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + u8 range_idx; + struct bma220_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = bma220_read_reg(data->spi_device, chan->address); + if (ret < 0) + return -EINVAL; + *val = sign_extend32(ret >> BMA220_DATA_SHIFT, 5); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + ret = bma220_read_reg(data->spi_device, BMA220_REG_RANGE); + if (ret < 0) + return ret; + range_idx = ret & BMA220_RANGE_MASK; + *val = bma220_scale_table[range_idx][0]; + *val2 = bma220_scale_table[range_idx][1]; + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; +} + +static int bma220_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int i; + int ret; + int index = -1; + struct bma220_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + for (i = 0; i < ARRAY_SIZE(bma220_scale_table); i++) + if (val == bma220_scale_table[i][0] && + val2 == bma220_scale_table[i][1]) { + index = i; + break; + } + if (index < 0) + return -EINVAL; + + mutex_lock(&data->lock); + data->tx_buf[0] = BMA220_REG_RANGE; + data->tx_buf[1] = index; + ret = spi_write(data->spi_device, data->tx_buf, + sizeof(data->tx_buf)); + if (ret < 0) + dev_err(&data->spi_device->dev, + "failed to set measurement range\n"); + mutex_unlock(&data->lock); + + return 0; + } + + return -EINVAL; +} + +static const struct iio_info bma220_info = { + .driver_module = THIS_MODULE, + .read_raw = bma220_read_raw, + .write_raw = bma220_write_raw, + .attrs = &bma220_attribute_group, +}; + +static int bma220_init(struct spi_device *spi) +{ + int ret; + + ret = bma220_read_reg(spi, BMA220_REG_ID); + if (ret != BMA220_CHIP_ID) + return -ENODEV; + + /* Make sure the chip is powered on */ + ret = bma220_read_reg(spi, BMA220_REG_SUSPEND); + if (ret < 0) + return ret; + else if (ret == BMA220_SUSPEND_WAKE) + return bma220_read_reg(spi, BMA220_REG_SUSPEND); + + return 0; +} + +static int bma220_deinit(struct spi_device *spi) +{ + int ret; + + /* Make sure the chip is powered off */ + ret = bma220_read_reg(spi, BMA220_REG_SUSPEND); + if (ret < 0) + return ret; + else if (ret == BMA220_SUSPEND_SLEEP) + return bma220_read_reg(spi, BMA220_REG_SUSPEND); + + return 0; +} + +static int bma220_probe(struct spi_device *spi) +{ + int ret; + struct iio_dev *indio_dev; + struct bma220_data *data; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); + if (!indio_dev) { + dev_err(&spi->dev, "iio allocation failed!\n"); + return -ENOMEM; + } + + data = iio_priv(indio_dev); + data->spi_device = spi; + spi_set_drvdata(spi, indio_dev); + mutex_init(&data->lock); + + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &bma220_info; + indio_dev->name = BMA220_DEVICE_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = bma220_channels; + indio_dev->num_channels = ARRAY_SIZE(bma220_channels); + indio_dev->available_scan_masks = bma220_accel_scan_masks; + + ret = bma220_init(data->spi_device); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + bma220_trigger_handler, NULL); + if (ret < 0) { + dev_err(&spi->dev, "iio triggered buffer setup failed\n"); + goto err_suspend; + } + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&spi->dev, "iio_device_register failed\n"); + iio_triggered_buffer_cleanup(indio_dev); + goto err_suspend; + } + + return 0; + +err_suspend: + return bma220_deinit(spi); +} + +static int bma220_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return bma220_deinit(spi); +} + +#ifdef CONFIG_PM_SLEEP +static int bma220_suspend(struct device *dev) +{ + struct bma220_data *data = + iio_priv(spi_get_drvdata(to_spi_device(dev))); + + /* The chip can be suspended/woken up by a simple register read. */ + return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND); +} + +static int bma220_resume(struct device *dev) +{ + struct bma220_data *data = + iio_priv(spi_get_drvdata(to_spi_device(dev))); + + return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND); +} + +static SIMPLE_DEV_PM_OPS(bma220_pm_ops, bma220_suspend, bma220_resume); + +#define BMA220_PM_OPS (&bma220_pm_ops) +#else +#define BMA220_PM_OPS NULL +#endif + +static const struct spi_device_id bma220_spi_id[] = { + {"bma220", 0}, + {} +}; + +static const struct acpi_device_id bma220_acpi_id[] = { + {"BMA0220", 0}, + {} +}; + +MODULE_DEVICE_TABLE(spi, bma220_spi_id); + +static struct spi_driver bma220_driver = { + .driver = { + .name = "bma220_spi", + .pm = BMA220_PM_OPS, + .acpi_match_table = ACPI_PTR(bma220_acpi_id), + }, + .probe = bma220_probe, + .remove = bma220_remove, + .id_table = bma220_spi_id, +}; + +module_spi_driver(bma220_driver); + +MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@intel.com>"); +MODULE_DESCRIPTION("BMA220 acceleration sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/mma7660.c b/drivers/iio/accel/mma7660.c new file mode 100644 index 000000000000..0acdee516973 --- /dev/null +++ b/drivers/iio/accel/mma7660.c @@ -0,0 +1,277 @@ +/** + * Freescale MMA7660FC 3-Axis Accelerometer + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for Freescale MMA7660FC; 7-bit I2C address: 0x4c. + */ + +#include <linux/acpi.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define MMA7660_DRIVER_NAME "mma7660" + +#define MMA7660_REG_XOUT 0x00 +#define MMA7660_REG_YOUT 0x01 +#define MMA7660_REG_ZOUT 0x02 +#define MMA7660_REG_OUT_BIT_ALERT BIT(6) + +#define MMA7660_REG_MODE 0x07 +#define MMA7660_REG_MODE_BIT_MODE BIT(0) +#define MMA7660_REG_MODE_BIT_TON BIT(2) + +#define MMA7660_I2C_READ_RETRIES 5 + +/* + * The accelerometer has one measurement range: + * + * -1.5g - +1.5g (6-bit, signed) + * + * scale = (1.5 + 1.5) * 9.81 / (2^6 - 1) = 0.467142857 + */ + +#define MMA7660_SCALE_AVAIL "0.467142857" + +const int mma7660_nscale = 467142857; + +#define MMA7660_CHANNEL(reg, axis) { \ + .type = IIO_ACCEL, \ + .address = reg, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec mma7660_channels[] = { + MMA7660_CHANNEL(MMA7660_REG_XOUT, X), + MMA7660_CHANNEL(MMA7660_REG_YOUT, Y), + MMA7660_CHANNEL(MMA7660_REG_ZOUT, Z), +}; + +enum mma7660_mode { + MMA7660_MODE_STANDBY, + MMA7660_MODE_ACTIVE +}; + +struct mma7660_data { + struct i2c_client *client; + struct mutex lock; + enum mma7660_mode mode; +}; + +static IIO_CONST_ATTR(in_accel_scale_available, MMA7660_SCALE_AVAIL); + +static struct attribute *mma7660_attributes[] = { + &iio_const_attr_in_accel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group mma7660_attribute_group = { + .attrs = mma7660_attributes +}; + +static int mma7660_set_mode(struct mma7660_data *data, + enum mma7660_mode mode) +{ + int ret; + struct i2c_client *client = data->client; + + if (mode == data->mode) + return 0; + + ret = i2c_smbus_read_byte_data(client, MMA7660_REG_MODE); + if (ret < 0) { + dev_err(&client->dev, "failed to read sensor mode\n"); + return ret; + } + + if (mode == MMA7660_MODE_ACTIVE) { + ret &= ~MMA7660_REG_MODE_BIT_TON; + ret |= MMA7660_REG_MODE_BIT_MODE; + } else { + ret &= ~MMA7660_REG_MODE_BIT_TON; + ret &= ~MMA7660_REG_MODE_BIT_MODE; + } + + ret = i2c_smbus_write_byte_data(client, MMA7660_REG_MODE, ret); + if (ret < 0) { + dev_err(&client->dev, "failed to change sensor mode\n"); + return ret; + } + + data->mode = mode; + + return ret; +} + +static int mma7660_read_accel(struct mma7660_data *data, u8 address) +{ + int ret, retries = MMA7660_I2C_READ_RETRIES; + struct i2c_client *client = data->client; + + /* + * Read data. If the Alert bit is set, the register was read at + * the same time as the device was attempting to update the content. + * The solution is to read the register again. Do this only + * MMA7660_I2C_READ_RETRIES times to avoid spending too much time + * in the kernel. + */ + do { + ret = i2c_smbus_read_byte_data(client, address); + if (ret < 0) { + dev_err(&client->dev, "register read failed\n"); + return ret; + } + } while (retries-- > 0 && ret & MMA7660_REG_OUT_BIT_ALERT); + + if (ret & MMA7660_REG_OUT_BIT_ALERT) { + dev_err(&client->dev, "all register read retries failed\n"); + return -ETIMEDOUT; + } + + return ret; +} + +static int mma7660_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct mma7660_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&data->lock); + ret = mma7660_read_accel(data, chan->address); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = sign_extend32(ret, 5); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = mma7660_nscale; + return IIO_VAL_INT_PLUS_NANO; + default: + return -EINVAL; + } + + return -EINVAL; +} + +static const struct iio_info mma7660_info = { + .driver_module = THIS_MODULE, + .read_raw = mma7660_read_raw, + .attrs = &mma7660_attribute_group, +}; + +static int mma7660_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct iio_dev *indio_dev; + struct mma7660_data *data; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) { + dev_err(&client->dev, "iio allocation failed!\n"); + return -ENOMEM; + } + + data = iio_priv(indio_dev); + data->client = client; + i2c_set_clientdata(client, indio_dev); + mutex_init(&data->lock); + data->mode = MMA7660_MODE_STANDBY; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &mma7660_info; + indio_dev->name = MMA7660_DRIVER_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = mma7660_channels; + indio_dev->num_channels = ARRAY_SIZE(mma7660_channels); + + ret = mma7660_set_mode(data, MMA7660_MODE_ACTIVE); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&client->dev, "device_register failed\n"); + mma7660_set_mode(data, MMA7660_MODE_STANDBY); + } + + return ret; +} + +static int mma7660_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + + return mma7660_set_mode(iio_priv(indio_dev), MMA7660_MODE_STANDBY); +} + +#ifdef CONFIG_PM_SLEEP +static int mma7660_suspend(struct device *dev) +{ + struct mma7660_data *data; + + data = iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return mma7660_set_mode(data, MMA7660_MODE_STANDBY); +} + +static int mma7660_resume(struct device *dev) +{ + struct mma7660_data *data; + + data = iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return mma7660_set_mode(data, MMA7660_MODE_ACTIVE); +} + +static SIMPLE_DEV_PM_OPS(mma7660_pm_ops, mma7660_suspend, mma7660_resume); + +#define MMA7660_PM_OPS (&mma7660_pm_ops) +#else +#define MMA7660_PM_OPS NULL +#endif + +static const struct i2c_device_id mma7660_i2c_id[] = { + {"mma7660", 0}, + {} +}; + +static const struct acpi_device_id mma7660_acpi_id[] = { + {"MMA7660", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, mma7660_acpi_id); + +static struct i2c_driver mma7660_driver = { + .driver = { + .name = "mma7660", + .pm = MMA7660_PM_OPS, + .acpi_match_table = ACPI_PTR(mma7660_acpi_id), + }, + .probe = mma7660_probe, + .remove = mma7660_remove, + .id_table = mma7660_i2c_id, +}; + +module_i2c_driver(mma7660_driver); + +MODULE_AUTHOR("Constantin Musca <constantin.musca@intel.com>"); +MODULE_DESCRIPTION("Freescale MMA7660FC 3-Axis Accelerometer driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index e225d3c53bd5..799fe64fc286 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1,22 +1,22 @@ /* - * mma8452.c - Support for following Freescale 3-axis accelerometers: + * mma8452.c - Support for following Freescale / NXP 3-axis accelerometers: * - * MMA8451Q (14 bit) - * MMA8452Q (12 bit) - * MMA8453Q (10 bit) - * MMA8652FC (12 bit) - * MMA8653FC (10 bit) - * FXLS8471Q (14 bit) + * device name digital output 7-bit I2C slave address (pin selectable) + * --------------------------------------------------------------------- + * MMA8451Q 14 bit 0x1c / 0x1d + * MMA8452Q 12 bit 0x1c / 0x1d + * MMA8453Q 10 bit 0x1c / 0x1d + * MMA8652FC 12 bit 0x1d + * MMA8653FC 10 bit 0x1d + * FXLS8471Q 14 bit 0x1e / 0x1d / 0x1c / 0x1f * - * Copyright 2015 Martin Kepplinger <martin.kepplinger@theobroma-systems.com> + * Copyright 2015 Martin Kepplinger <martink@posteo.de> * Copyright 2014 Peter Meerwald <pmeerw@pmeerw.net> * * This file is subject to the terms and conditions of version 2 of * the GNU General Public License. See the file COPYING in the main * directory of this archive for more details. * - * 7-bit I2C slave address 0x1c/0x1d (pin selectable) - * * TODO: orientation events */ @@ -76,6 +76,8 @@ #define MMA8452_CTRL_DR_DEFAULT 0x4 /* 50 Hz sample frequency */ #define MMA8452_CTRL_REG2 0x2b #define MMA8452_CTRL_REG2_RST BIT(6) +#define MMA8452_CTRL_REG2_MODS_SHIFT 3 +#define MMA8452_CTRL_REG2_MODS_MASK 0x1b #define MMA8452_CTRL_REG4 0x2d #define MMA8452_CTRL_REG5 0x2e #define MMA8452_OFF_X 0x2f @@ -106,7 +108,7 @@ struct mma8452_data { }; /** - * struct mma_chip_info - chip specific data for Freescale's accelerometers + * struct mma_chip_info - chip specific data * @chip_id: WHO_AM_I register's value * @channels: struct iio_chan_spec matching the device's * capabilities @@ -257,20 +259,17 @@ static const int mma8452_samp_freq[8][2] = { {6, 250000}, {1, 560000} }; -/* Datasheet table 35 (step time vs sample frequency) */ -static const int mma8452_transient_time_step_us[8] = { - 1250, - 2500, - 5000, - 10000, - 20000, - 20000, - 20000, - 20000 +/* Datasheet table: step time "Relationship with the ODR" (sample frequency) */ +static const int mma8452_transient_time_step_us[4][8] = { + { 1250, 2500, 5000, 10000, 20000, 20000, 20000, 20000 }, /* normal */ + { 1250, 2500, 5000, 10000, 20000, 80000, 80000, 80000 }, /* l p l n */ + { 1250, 2500, 2500, 2500, 2500, 2500, 2500, 2500 }, /* high res*/ + { 1250, 2500, 5000, 10000, 20000, 80000, 160000, 160000 } /* l p */ }; -/* Datasheet table 18 (normal mode) */ -static const int mma8452_hp_filter_cutoff[8][4][2] = { +/* Datasheet table "High-Pass Filter Cutoff Options" */ +static const int mma8452_hp_filter_cutoff[4][8][4][2] = { + { /* normal */ { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 800 Hz sample */ { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, /* 400 Hz sample */ { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, /* 200 Hz sample */ @@ -279,8 +278,61 @@ static const int mma8452_hp_filter_cutoff[8][4][2] = { { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 12.5 Hz sample */ { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, /* 6.25 Hz sample */ { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} } /* 1.56 Hz sample */ + }, + { /* low noise low power */ + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, + { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, + { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, + { {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} }, + { {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} }, + { {0, 500000}, {0, 250000}, {0, 125000}, {0, 063000} } + }, + { /* high resolution */ + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {16, 0}, {8, 0}, {4, 0}, {2, 0} } + }, + { /* low power */ + { {16, 0}, {8, 0}, {4, 0}, {2, 0} }, + { {8, 0}, {4, 0}, {2, 0}, {1, 0} }, + { {4, 0}, {2, 0}, {1, 0}, {0, 500000} }, + { {2, 0}, {1, 0}, {0, 500000}, {0, 250000} }, + { {1, 0}, {0, 500000}, {0, 250000}, {0, 125000} }, + { {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} }, + { {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} }, + { {0, 250000}, {0, 125000}, {0, 063000}, {0, 031000} } + } +}; + +/* Datasheet table "MODS Oversampling modes averaging values at each ODR" */ +static const u16 mma8452_os_ratio[4][8] = { + /* 800 Hz, 400 Hz, ... , 1.56 Hz */ + { 2, 4, 4, 4, 4, 16, 32, 128 }, /* normal */ + { 2, 4, 4, 4, 4, 4, 8, 32 }, /* low power low noise */ + { 2, 4, 8, 16, 32, 128, 256, 1024 }, /* high resolution */ + { 2, 2, 2, 2, 2, 2, 4, 16 } /* low power */ }; +static int mma8452_get_power_mode(struct mma8452_data *data) +{ + int reg; + + reg = i2c_smbus_read_byte_data(data->client, + MMA8452_CTRL_REG2); + if (reg < 0) + return reg; + + return ((reg & MMA8452_CTRL_REG2_MODS_MASK) >> + MMA8452_CTRL_REG2_MODS_SHIFT); +} + static ssize_t mma8452_show_samp_freq_avail(struct device *dev, struct device_attribute *attr, char *buf) @@ -306,10 +358,39 @@ static ssize_t mma8452_show_hp_cutoff_avail(struct device *dev, { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct mma8452_data *data = iio_priv(indio_dev); + int i, j; + + i = mma8452_get_odr_index(data); + j = mma8452_get_power_mode(data); + if (j < 0) + return j; + + return mma8452_show_int_plus_micros(buf, mma8452_hp_filter_cutoff[j][i], + ARRAY_SIZE(mma8452_hp_filter_cutoff[0][0])); +} + +static ssize_t mma8452_show_os_ratio_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct mma8452_data *data = iio_priv(indio_dev); int i = mma8452_get_odr_index(data); + int j; + u16 val = 0; + size_t len = 0; + + for (j = 0; j < ARRAY_SIZE(mma8452_os_ratio); j++) { + if (val == mma8452_os_ratio[j][i]) + continue; + + val = mma8452_os_ratio[j][i]; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", val); + } + buf[len - 1] = '\n'; - return mma8452_show_int_plus_micros(buf, mma8452_hp_filter_cutoff[i], - ARRAY_SIZE(mma8452_hp_filter_cutoff[0])); + return len; } static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mma8452_show_samp_freq_avail); @@ -317,6 +398,8 @@ static IIO_DEVICE_ATTR(in_accel_scale_available, S_IRUGO, mma8452_show_scale_avail, NULL, 0); static IIO_DEVICE_ATTR(in_accel_filter_high_pass_3db_frequency_available, S_IRUGO, mma8452_show_hp_cutoff_avail, NULL, 0); +static IIO_DEVICE_ATTR(in_accel_oversampling_ratio_available, S_IRUGO, + mma8452_show_os_ratio_avail, NULL, 0); static int mma8452_get_samp_freq_index(struct mma8452_data *data, int val, int val2) @@ -335,24 +418,33 @@ static int mma8452_get_scale_index(struct mma8452_data *data, int val, int val2) static int mma8452_get_hp_filter_index(struct mma8452_data *data, int val, int val2) { - int i = mma8452_get_odr_index(data); + int i, j; + + i = mma8452_get_odr_index(data); + j = mma8452_get_power_mode(data); + if (j < 0) + return j; - return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[i], - ARRAY_SIZE(mma8452_hp_filter_cutoff[0]), val, val2); + return mma8452_get_int_plus_micros_index(mma8452_hp_filter_cutoff[j][i], + ARRAY_SIZE(mma8452_hp_filter_cutoff[0][0]), val, val2); } static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz) { - int i, ret; + int j, i, ret; ret = i2c_smbus_read_byte_data(data->client, MMA8452_HP_FILTER_CUTOFF); if (ret < 0) return ret; i = mma8452_get_odr_index(data); + j = mma8452_get_power_mode(data); + if (j < 0) + return j; + ret &= MMA8452_HP_FILTER_CUTOFF_SEL_MASK; - *hz = mma8452_hp_filter_cutoff[i][ret][0]; - *uHz = mma8452_hp_filter_cutoff[i][ret][1]; + *hz = mma8452_hp_filter_cutoff[j][i][ret][0]; + *uHz = mma8452_hp_filter_cutoff[j][i][ret][1]; return 0; } @@ -414,6 +506,15 @@ static int mma8452_read_raw(struct iio_dev *indio_dev, } return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = mma8452_get_power_mode(data); + if (ret < 0) + return ret; + + i = mma8452_get_odr_index(data); + + *val = mma8452_os_ratio[ret][i]; + return IIO_VAL_INT; } return -EINVAL; @@ -480,6 +581,21 @@ fail: return ret; } +static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode) +{ + int reg; + + reg = i2c_smbus_read_byte_data(data->client, + MMA8452_CTRL_REG2); + if (reg < 0) + return reg; + + reg &= ~MMA8452_CTRL_REG2_MODS_MASK; + reg |= mode << MMA8452_CTRL_REG2_MODS_SHIFT; + + return mma8452_change_config(data, MMA8452_CTRL_REG2, reg); +} + /* returns >0 if in freefall mode, 0 if not or <0 if an error occurred */ static int mma8452_freefall_mode_enabled(struct mma8452_data *data) { @@ -597,6 +713,14 @@ static int mma8452_write_raw(struct iio_dev *indio_dev, return mma8452_change_config(data, MMA8452_DATA_CFG, data->data_cfg); + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = mma8452_get_odr_index(data); + + for (i = 0; i < ARRAY_SIZE(mma8452_os_ratio); i++) { + if (mma8452_os_ratio[i][ret] == val) + return mma8452_set_power_mode(data, i); + } + default: return -EINVAL; } @@ -610,7 +734,7 @@ static int mma8452_read_thresh(struct iio_dev *indio_dev, int *val, int *val2) { struct mma8452_data *data = iio_priv(indio_dev); - int ret, us; + int ret, us, power_mode; switch (info) { case IIO_EV_INFO_VALUE: @@ -629,7 +753,11 @@ static int mma8452_read_thresh(struct iio_dev *indio_dev, if (ret < 0) return ret; - us = ret * mma8452_transient_time_step_us[ + power_mode = mma8452_get_power_mode(data); + if (power_mode < 0) + return power_mode; + + us = ret * mma8452_transient_time_step_us[power_mode][ mma8452_get_odr_index(data)]; *val = us / USEC_PER_SEC; *val2 = us % USEC_PER_SEC; @@ -677,8 +805,12 @@ static int mma8452_write_thresh(struct iio_dev *indio_dev, val); case IIO_EV_INFO_PERIOD: + ret = mma8452_get_power_mode(data); + if (ret < 0) + return ret; + steps = (val * USEC_PER_SEC + val2) / - mma8452_transient_time_step_us[ + mma8452_transient_time_step_us[ret][ mma8452_get_odr_index(data)]; if (steps < 0 || steps > 0xff) @@ -978,7 +1110,8 @@ static struct attribute_group mma8452_event_attribute_group = { BIT(IIO_CHAN_INFO_CALIBBIAS), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ BIT(IIO_CHAN_INFO_SCALE) | \ - BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY), \ + BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .scan_index = idx, \ .scan_type = { \ .sign = 's', \ @@ -998,7 +1131,8 @@ static struct attribute_group mma8452_event_attribute_group = { .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_CALIBBIAS), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ - BIT(IIO_CHAN_INFO_SCALE), \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .scan_index = idx, \ .scan_type = { \ .sign = 's', \ @@ -1171,6 +1305,7 @@ static struct attribute *mma8452_attributes[] = { &iio_dev_attr_sampling_frequency_available.dev_attr.attr, &iio_dev_attr_in_accel_scale_available.dev_attr.attr, &iio_dev_attr_in_accel_filter_high_pass_3db_frequency_available.dev_attr.attr, + &iio_dev_attr_in_accel_oversampling_ratio_available.dev_attr.attr, NULL }; @@ -1558,5 +1693,5 @@ static struct i2c_driver mma8452_driver = { module_i2c_driver(mma8452_driver); MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); -MODULE_DESCRIPTION("Freescale MMA8452 accelerometer driver"); +MODULE_DESCRIPTION("Freescale / NXP MMA8452 accelerometer driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 4d95bfc4786c..dce289aa40f2 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -758,13 +758,15 @@ int st_accel_common_probe(struct iio_dev *indio_dev) indio_dev->info = &accel_info; mutex_init(&adata->tb.buf_lock); - st_sensors_power_enable(indio_dev); + err = st_sensors_power_enable(indio_dev); + if (err) + return err; err = st_sensors_check_device_support(indio_dev, ARRAY_SIZE(st_accel_sensors_settings), st_accel_sensors_settings); if (err < 0) - return err; + goto st_accel_power_off; adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS; adata->multiread_bit = adata->sensor_settings->multi_read_bit; @@ -781,11 +783,11 @@ int st_accel_common_probe(struct iio_dev *indio_dev) err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data); if (err < 0) - return err; + goto st_accel_power_off; err = st_accel_allocate_ring(indio_dev); if (err < 0) - return err; + goto st_accel_power_off; if (irq > 0) { err = st_sensors_allocate_trigger(indio_dev, @@ -808,6 +810,8 @@ st_accel_device_register_error: st_sensors_deallocate_trigger(indio_dev); st_accel_probe_trigger_error: st_accel_deallocate_ring(indio_dev); +st_accel_power_off: + st_sensors_power_disable(indio_dev); return err; } diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c index 2123f0ac2e2a..11c65db14747 100644 --- a/drivers/iio/adc/ad7266.c +++ b/drivers/iio/adc/ad7266.c @@ -154,12 +154,11 @@ static int ad7266_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: - if (iio_buffer_enabled(indio_dev)) - return -EBUSY; - - ret = ad7266_read_single(st, val, chan->address); + ret = iio_device_claim_direct_mode(indio_dev); if (ret) return ret; + ret = ad7266_read_single(st, val, chan->address); + iio_device_release_direct_mode(indio_dev); *val = (*val >> 2) & 0xfff; if (chan->scan_type.sign == 's') diff --git a/drivers/iio/adc/ad7476.c b/drivers/iio/adc/ad7476.c index be85c2a0ad97..810c9a9fa62f 100644 --- a/drivers/iio/adc/ad7476.c +++ b/drivers/iio/adc/ad7476.c @@ -106,12 +106,11 @@ static int ad7476_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) - ret = -EBUSY; - else - ret = ad7476_scan_direct(st); - mutex_unlock(&indio_dev->mlock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = ad7476_scan_direct(st); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; diff --git a/drivers/iio/adc/ad7791.c b/drivers/iio/adc/ad7791.c index cf172d58cd44..1dfe6410c64c 100644 --- a/drivers/iio/adc/ad7791.c +++ b/drivers/iio/adc/ad7791.c @@ -272,30 +272,22 @@ static ssize_t ad7791_write_frequency(struct device *dev, struct ad7791_state *st = iio_priv(indio_dev); int i, ret; - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) { - mutex_unlock(&indio_dev->mlock); - return -EBUSY; - } - mutex_unlock(&indio_dev->mlock); - - ret = -EINVAL; - - for (i = 0; i < ARRAY_SIZE(ad7791_sample_freq_avail); i++) { - if (sysfs_streq(ad7791_sample_freq_avail[i], buf)) { - - mutex_lock(&indio_dev->mlock); - st->filter &= ~AD7791_FILTER_RATE_MASK; - st->filter |= i; - ad_sd_write_reg(&st->sd, AD7791_REG_FILTER, - sizeof(st->filter), st->filter); - mutex_unlock(&indio_dev->mlock); - ret = 0; + for (i = 0; i < ARRAY_SIZE(ad7791_sample_freq_avail); i++) + if (sysfs_streq(ad7791_sample_freq_avail[i], buf)) break; - } - } + if (i == ARRAY_SIZE(ad7791_sample_freq_avail)) + return -EINVAL; + + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + st->filter &= ~AD7791_FILTER_RATE_MASK; + st->filter |= i; + ad_sd_write_reg(&st->sd, AD7791_REG_FILTER, sizeof(st->filter), + st->filter); + iio_device_release_direct_mode(indio_dev); - return ret ? ret : len; + return len; } static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index 7b07bb651671..a43722fbf03a 100644 --- a/drivers/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -369,13 +369,6 @@ static ssize_t ad7793_write_frequency(struct device *dev, long lval; int i, ret; - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) { - mutex_unlock(&indio_dev->mlock); - return -EBUSY; - } - mutex_unlock(&indio_dev->mlock); - ret = kstrtol(buf, 10, &lval); if (ret) return ret; @@ -383,20 +376,21 @@ static ssize_t ad7793_write_frequency(struct device *dev, if (lval == 0) return -EINVAL; - ret = -EINVAL; - for (i = 0; i < 16; i++) - if (lval == st->chip_info->sample_freq_avail[i]) { - mutex_lock(&indio_dev->mlock); - st->mode &= ~AD7793_MODE_RATE(-1); - st->mode |= AD7793_MODE_RATE(i); - ad_sd_write_reg(&st->sd, AD7793_REG_MODE, - sizeof(st->mode), st->mode); - mutex_unlock(&indio_dev->mlock); - ret = 0; - } + if (lval == st->chip_info->sample_freq_avail[i]) + break; + if (i == 16) + return -EINVAL; - return ret ? ret : len; + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + st->mode &= ~AD7793_MODE_RATE(-1); + st->mode |= AD7793_MODE_RATE(i); + ad_sd_write_reg(&st->sd, AD7793_REG_MODE, sizeof(st->mode), st->mode); + iio_device_release_direct_mode(indio_dev); + + return len; } static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, diff --git a/drivers/iio/adc/ad7887.c b/drivers/iio/adc/ad7887.c index 2d3c397e66ad..ee2ccc19fab6 100644 --- a/drivers/iio/adc/ad7887.c +++ b/drivers/iio/adc/ad7887.c @@ -156,12 +156,11 @@ static int ad7887_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) - ret = -EBUSY; - else - ret = ad7887_scan_direct(st, chan->address); - mutex_unlock(&indio_dev->mlock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = ad7887_scan_direct(st, chan->address); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c index 45e29ccd824f..ff444c19d749 100644 --- a/drivers/iio/adc/ad7923.c +++ b/drivers/iio/adc/ad7923.c @@ -233,12 +233,11 @@ static int ad7923_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) - ret = -EBUSY; - else - ret = ad7923_scan_direct(st, chan->address); - mutex_unlock(&indio_dev->mlock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = ad7923_scan_direct(st, chan->address); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c index a3f5254f4e51..ec0200dd52cb 100644 --- a/drivers/iio/adc/ad799x.c +++ b/drivers/iio/adc/ad799x.c @@ -282,12 +282,11 @@ static int ad799x_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) - ret = -EBUSY; - else - ret = ad799x_scan_direct(st, chan->scan_index); - mutex_unlock(&indio_dev->mlock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + ret = ad799x_scan_direct(st, chan->scan_index); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; @@ -395,11 +394,9 @@ static int ad799x_write_event_config(struct iio_dev *indio_dev, struct ad799x_state *st = iio_priv(indio_dev); int ret; - mutex_lock(&indio_dev->mlock); - if (iio_buffer_enabled(indio_dev)) { - ret = -EBUSY; - goto done; - } + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; if (state) st->config |= BIT(chan->scan_index) << AD799X_CHANNEL_SHIFT; @@ -412,10 +409,7 @@ static int ad799x_write_event_config(struct iio_dev *indio_dev, st->config &= ~AD7998_ALERT_EN; ret = ad799x_write_config(st, st->config); - -done: - mutex_unlock(&indio_dev->mlock); - + iio_device_release_direct_mode(indio_dev); return ret; } diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c index ad26da1edbee..b84d37c80a94 100644 --- a/drivers/iio/adc/mxs-lradc.c +++ b/drivers/iio/adc/mxs-lradc.c @@ -373,13 +373,6 @@ static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc) return LRADC_CTRL0_MX28_PLATE_MASK; } -static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc) -{ - if (lradc->soc == IMX23_LRADC) - return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK; - return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK; -} - static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc) { if (lradc->soc == IMX23_LRADC) @@ -1120,18 +1113,16 @@ static int mxs_lradc_ts_register(struct mxs_lradc *lradc) { struct input_dev *input; struct device *dev = lradc->dev; - int ret; if (!lradc->use_touchscreen) return 0; - input = input_allocate_device(); + input = devm_input_allocate_device(dev); if (!input) return -ENOMEM; input->name = DRIVER_NAME; input->id.bustype = BUS_HOST; - input->dev.parent = dev; input->open = mxs_lradc_ts_open; input->close = mxs_lradc_ts_close; @@ -1146,20 +1137,8 @@ static int mxs_lradc_ts_register(struct mxs_lradc *lradc) lradc->ts_input = input; input_set_drvdata(input, lradc); - ret = input_register_device(input); - if (ret) - input_free_device(lradc->ts_input); - - return ret; -} - -static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc) -{ - if (!lradc->use_touchscreen) - return; - mxs_lradc_disable_ts(lradc); - input_unregister_device(lradc->ts_input); + return input_register_device(input); } /* @@ -1510,7 +1489,9 @@ static void mxs_lradc_hw_stop(struct mxs_lradc *lradc) { int i; - mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1); + mxs_lradc_reg_clear(lradc, + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET, + LRADC_CTRL1); for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++) mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i)); @@ -1721,13 +1702,11 @@ static int mxs_lradc_probe(struct platform_device *pdev) ret = iio_device_register(iio); if (ret) { dev_err(dev, "Failed to register IIO device\n"); - goto err_ts; + return ret; } return 0; -err_ts: - mxs_lradc_ts_unregister(lradc); err_ts_register: mxs_lradc_hw_stop(lradc); err_dev: @@ -1745,7 +1724,6 @@ static int mxs_lradc_remove(struct platform_device *pdev) struct mxs_lradc *lradc = iio_priv(iio); iio_device_unregister(iio); - mxs_lradc_ts_unregister(lradc); mxs_lradc_hw_stop(lradc); mxs_lradc_trigger_remove(iio); iio_triggered_buffer_cleanup(iio); diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c index e525aa6475c4..57365c504093 100644 --- a/drivers/iio/adc/nau7802.c +++ b/drivers/iio/adc/nau7802.c @@ -79,10 +79,29 @@ static const struct iio_chan_spec nau7802_chan_array[] = { static const u16 nau7802_sample_freq_avail[] = {10, 20, 40, 80, 10, 10, 10, 320}; +static ssize_t nau7802_show_scales(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct nau7802_state *st = iio_priv(dev_to_iio_dev(dev)); + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09d ", + st->scale_avail[i]); + + buf[len-1] = '\n'; + + return len; +} + static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 40 80 320"); +static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO, nau7802_show_scales, + NULL, 0); + static struct attribute *nau7802_attributes[] = { &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, NULL }; diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c index 9fd032d9f402..f8807adc08c4 100644 --- a/drivers/iio/adc/ti-adc081c.c +++ b/drivers/iio/adc/ti-adc081c.c @@ -22,6 +22,7 @@ #include <linux/i2c.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/acpi.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> @@ -149,12 +150,24 @@ static int adc081c_probe(struct i2c_client *client, { struct iio_dev *iio; struct adc081c *adc; - struct adcxx1c_model *model = &adcxx1c_models[id->driver_data]; + struct adcxx1c_model *model; int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) return -EOPNOTSUPP; + if (ACPI_COMPANION(&client->dev)) { + const struct acpi_device_id *ad_id; + + ad_id = acpi_match_device(client->dev.driver->acpi_match_table, + &client->dev); + if (!ad_id) + return -ENODEV; + model = &adcxx1c_models[ad_id->driver_data]; + } else { + model = &adcxx1c_models[id->driver_data]; + } + iio = devm_iio_device_alloc(&client->dev, sizeof(*adc)); if (!iio) return -ENOMEM; @@ -231,10 +244,21 @@ static const struct of_device_id adc081c_of_match[] = { MODULE_DEVICE_TABLE(of, adc081c_of_match); #endif +#ifdef CONFIG_ACPI +static const struct acpi_device_id adc081c_acpi_match[] = { + { "ADC081C", ADC081C }, + { "ADC101C", ADC101C }, + { "ADC121C", ADC121C }, + { } +}; +MODULE_DEVICE_TABLE(acpi, adc081c_acpi_match); +#endif + static struct i2c_driver adc081c_driver = { .driver = { .name = "adc081c", .of_match_table = of_match_ptr(adc081c_of_match), + .acpi_match_table = ACPI_PTR(adc081c_acpi_match), }, .probe = adc081c_probe, .remove = adc081c_remove, diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c index 73cbf0b54e54..8be192a84893 100644 --- a/drivers/iio/adc/ti-ads1015.c +++ b/drivers/iio/adc/ti-ads1015.c @@ -55,6 +55,11 @@ #define ADS1015_DEFAULT_DATA_RATE 4 #define ADS1015_DEFAULT_CHAN 0 +enum { + ADS1015, + ADS1115, +}; + enum ads1015_channels { ADS1015_AIN0_AIN1 = 0, ADS1015_AIN0_AIN3, @@ -71,6 +76,10 @@ static const unsigned int ads1015_data_rate[] = { 128, 250, 490, 920, 1600, 2400, 3300, 3300 }; +static const unsigned int ads1115_data_rate[] = { + 8, 16, 32, 64, 128, 250, 475, 860 +}; + static const struct { int scale; int uscale; @@ -101,6 +110,7 @@ static const struct { .shift = 4, \ .endianness = IIO_CPU, \ }, \ + .datasheet_name = "AIN"#_chan, \ } #define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) { \ @@ -121,6 +131,45 @@ static const struct { .shift = 4, \ .endianness = IIO_CPU, \ }, \ + .datasheet_name = "AIN"#_chan"-AIN"#_chan2, \ +} + +#define ADS1115_V_CHAN(_chan, _addr) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ + .datasheet_name = "AIN"#_chan, \ +} + +#define ADS1115_V_DIFF_CHAN(_chan, _chan2, _addr) { \ + .type = IIO_VOLTAGE, \ + .differential = 1, \ + .indexed = 1, \ + .address = _addr, \ + .channel = _chan, \ + .channel2 = _chan2, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = _addr, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ + .datasheet_name = "AIN"#_chan"-AIN"#_chan2, \ } struct ads1015_data { @@ -131,6 +180,8 @@ struct ads1015_data { */ struct mutex lock; struct ads1015_channel_data channel_data[ADS1015_CHANNELS]; + + unsigned int *data_rate; }; static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg) @@ -157,6 +208,18 @@ static const struct iio_chan_spec ads1015_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), }; +static const struct iio_chan_spec ads1115_channels[] = { + ADS1115_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1), + ADS1115_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3), + ADS1115_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3), + ADS1115_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3), + ADS1115_V_CHAN(0, ADS1015_AIN0), + ADS1115_V_CHAN(1, ADS1015_AIN1), + ADS1115_V_CHAN(2, ADS1015_AIN2), + ADS1115_V_CHAN(3, ADS1015_AIN3), + IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP), +}; + static int ads1015_set_power_state(struct ads1015_data *data, bool on) { int ret; @@ -196,7 +259,7 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) return ret; if (change) { - conv_time = DIV_ROUND_UP(USEC_PER_SEC, ads1015_data_rate[dr]); + conv_time = DIV_ROUND_UP(USEC_PER_SEC, data->data_rate[dr]); usleep_range(conv_time, conv_time + 1); } @@ -263,7 +326,7 @@ static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate) int i, ret, rindex = -1; for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++) - if (ads1015_data_rate[i] == rate) { + if (data->data_rate[i] == rate) { rindex = i; break; } @@ -291,7 +354,9 @@ static int ads1015_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); mutex_lock(&data->lock); switch (mask) { - case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_RAW: { + int shift = chan->scan_type.shift; + if (iio_buffer_enabled(indio_dev)) { ret = -EBUSY; break; @@ -307,8 +372,7 @@ static int ads1015_read_raw(struct iio_dev *indio_dev, break; } - /* 12 bit res, D0 is bit 4 in conversion register */ - *val = sign_extend32(*val >> 4, 11); + *val = sign_extend32(*val >> shift, 15 - shift); ret = ads1015_set_power_state(data, false); if (ret < 0) @@ -316,6 +380,7 @@ static int ads1015_read_raw(struct iio_dev *indio_dev, ret = IIO_VAL_INT; break; + } case IIO_CHAN_INFO_SCALE: idx = data->channel_data[chan->address].pga; *val = ads1015_scale[idx].scale; @@ -324,7 +389,7 @@ static int ads1015_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_SAMP_FREQ: idx = data->channel_data[chan->address].data_rate; - *val = ads1015_data_rate[idx]; + *val = data->data_rate[idx]; ret = IIO_VAL_INT; break; default: @@ -380,12 +445,15 @@ static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = { }; static IIO_CONST_ATTR(scale_available, "3 2 1 0.5 0.25 0.125"); -static IIO_CONST_ATTR(sampling_frequency_available, - "128 250 490 920 1600 2400 3300"); + +static IIO_CONST_ATTR_NAMED(ads1015_sampling_frequency_available, + sampling_frequency_available, "128 250 490 920 1600 2400 3300"); +static IIO_CONST_ATTR_NAMED(ads1115_sampling_frequency_available, + sampling_frequency_available, "8 16 32 64 128 250 475 860"); static struct attribute *ads1015_attributes[] = { &iio_const_attr_scale_available.dev_attr.attr, - &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_const_attr_ads1015_sampling_frequency_available.dev_attr.attr, NULL, }; @@ -393,11 +461,28 @@ static const struct attribute_group ads1015_attribute_group = { .attrs = ads1015_attributes, }; -static const struct iio_info ads1015_info = { +static struct attribute *ads1115_attributes[] = { + &iio_const_attr_scale_available.dev_attr.attr, + &iio_const_attr_ads1115_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ads1115_attribute_group = { + .attrs = ads1115_attributes, +}; + +static struct iio_info ads1015_info = { + .driver_module = THIS_MODULE, + .read_raw = ads1015_read_raw, + .write_raw = ads1015_write_raw, + .attrs = &ads1015_attribute_group, +}; + +static struct iio_info ads1115_info = { .driver_module = THIS_MODULE, .read_raw = ads1015_read_raw, .write_raw = ads1015_write_raw, - .attrs = &ads1015_attribute_group, + .attrs = &ads1115_attribute_group, }; #ifdef CONFIG_OF @@ -500,12 +585,24 @@ static int ads1015_probe(struct i2c_client *client, mutex_init(&data->lock); indio_dev->dev.parent = &client->dev; - indio_dev->info = &ads1015_info; indio_dev->name = ADS1015_DRV_NAME; - indio_dev->channels = ads1015_channels; - indio_dev->num_channels = ARRAY_SIZE(ads1015_channels); indio_dev->modes = INDIO_DIRECT_MODE; + switch (id->driver_data) { + case ADS1015: + indio_dev->channels = ads1015_channels; + indio_dev->num_channels = ARRAY_SIZE(ads1015_channels); + indio_dev->info = &ads1015_info; + data->data_rate = (unsigned int *) &ads1015_data_rate; + break; + case ADS1115: + indio_dev->channels = ads1115_channels; + indio_dev->num_channels = ARRAY_SIZE(ads1115_channels); + indio_dev->info = &ads1115_info; + data->data_rate = (unsigned int *) &ads1115_data_rate; + break; + } + /* we need to keep this ABI the same as used by hwmon ADS1015 driver */ ads1015_get_channels_config(client); @@ -590,7 +687,8 @@ static const struct dev_pm_ops ads1015_pm_ops = { }; static const struct i2c_device_id ads1015_id[] = { - {"ads1015", 0}, + {"ads1015", ADS1015}, + {"ads1115", ADS1115}, {} }; MODULE_DEVICE_TABLE(i2c, ads1015_id); diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index c1e05532d437..8a368756881b 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -326,8 +326,7 @@ static int tiadc_channel_init(struct iio_dev *indio_dev, int channels) int i; indio_dev->num_channels = channels; - chan_array = kcalloc(channels, - sizeof(struct iio_chan_spec), GFP_KERNEL); + chan_array = kcalloc(channels, sizeof(*chan_array), GFP_KERNEL); if (chan_array == NULL) return -ENOMEM; @@ -467,8 +466,7 @@ static int tiadc_probe(struct platform_device *pdev) return -EINVAL; } - indio_dev = devm_iio_device_alloc(&pdev->dev, - sizeof(struct tiadc_device)); + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*indio_dev)); if (indio_dev == NULL) { dev_err(&pdev->dev, "failed to allocate iio device\n"); return -ENOMEM; @@ -531,8 +529,7 @@ static int tiadc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int tiadc_suspend(struct device *dev) +static int __maybe_unused tiadc_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct tiadc_device *adc_dev = iio_priv(indio_dev); @@ -550,7 +547,7 @@ static int tiadc_suspend(struct device *dev) return 0; } -static int tiadc_resume(struct device *dev) +static int __maybe_unused tiadc_resume(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct tiadc_device *adc_dev = iio_priv(indio_dev); @@ -567,14 +564,7 @@ static int tiadc_resume(struct device *dev) return 0; } -static const struct dev_pm_ops tiadc_pm_ops = { - .suspend = tiadc_suspend, - .resume = tiadc_resume, -}; -#define TIADC_PM_OPS (&tiadc_pm_ops) -#else -#define TIADC_PM_OPS NULL -#endif +static SIMPLE_DEV_PM_OPS(tiadc_pm_ops, tiadc_suspend, tiadc_resume); static const struct of_device_id ti_adc_dt_ids[] = { { .compatible = "ti,am3359-adc", }, @@ -585,7 +575,7 @@ MODULE_DEVICE_TABLE(of, ti_adc_dt_ids); static struct platform_driver tiadc_driver = { .driver = { .name = "TI-am335x-adc", - .pm = TIADC_PM_OPS, + .pm = &tiadc_pm_ops, .of_match_table = ti_adc_dt_ids, }, .probe = tiadc_probe, diff --git a/drivers/iio/buffer/industrialio-buffer-dma.c b/drivers/iio/buffer/industrialio-buffer-dma.c index 212cbedc7abb..dd99d273bae9 100644 --- a/drivers/iio/buffer/industrialio-buffer-dma.c +++ b/drivers/iio/buffer/industrialio-buffer-dma.c @@ -305,7 +305,7 @@ int iio_dma_buffer_request_update(struct iio_buffer *buffer) queue->fileio.active_block = NULL; spin_lock_irq(&queue->list_lock); - for (i = 0; i < 2; i++) { + for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { block = queue->fileio.blocks[i]; /* If we can't re-use it free it */ @@ -323,7 +323,7 @@ int iio_dma_buffer_request_update(struct iio_buffer *buffer) INIT_LIST_HEAD(&queue->incoming); - for (i = 0; i < 2; i++) { + for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { if (queue->fileio.blocks[i]) { block = queue->fileio.blocks[i]; if (block->state == IIO_BLOCK_STATE_DEAD) { diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index f73290f84c90..4bcc025e8c8a 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -5,15 +5,17 @@ menu "Chemical Sensors" config ATLAS_PH_SENSOR - tristate "Atlas Scientific OEM pH-SM sensor" + tristate "Atlas Scientific OEM SM sensors" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER select IRQ_WORK help - Say Y here to build I2C interface support for the Atlas - Scientific OEM pH-SM sensor. + Say Y here to build I2C interface support for the following + Atlas Scientific OEM SM sensors: + * pH SM sensor + * EC SM sensor To compile this driver as module, choose M here: the module will be called atlas-ph-sensor. diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c index 62b37cd8fb56..02e85db5d31f 100644 --- a/drivers/iio/chemical/atlas-ph-sensor.c +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -24,6 +24,7 @@ #include <linux/irq_work.h> #include <linux/gpio.h> #include <linux/i2c.h> +#include <linux/of_device.h> #include <linux/regmap.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> @@ -43,29 +44,50 @@ #define ATLAS_REG_PWR_CONTROL 0x06 -#define ATLAS_REG_CALIB_STATUS 0x0d -#define ATLAS_REG_CALIB_STATUS_MASK 0x07 -#define ATLAS_REG_CALIB_STATUS_LOW BIT(0) -#define ATLAS_REG_CALIB_STATUS_MID BIT(1) -#define ATLAS_REG_CALIB_STATUS_HIGH BIT(2) +#define ATLAS_REG_PH_CALIB_STATUS 0x0d +#define ATLAS_REG_PH_CALIB_STATUS_MASK 0x07 +#define ATLAS_REG_PH_CALIB_STATUS_LOW BIT(0) +#define ATLAS_REG_PH_CALIB_STATUS_MID BIT(1) +#define ATLAS_REG_PH_CALIB_STATUS_HIGH BIT(2) -#define ATLAS_REG_TEMP_DATA 0x0e +#define ATLAS_REG_EC_CALIB_STATUS 0x0f +#define ATLAS_REG_EC_CALIB_STATUS_MASK 0x0f +#define ATLAS_REG_EC_CALIB_STATUS_DRY BIT(0) +#define ATLAS_REG_EC_CALIB_STATUS_SINGLE BIT(1) +#define ATLAS_REG_EC_CALIB_STATUS_LOW BIT(2) +#define ATLAS_REG_EC_CALIB_STATUS_HIGH BIT(3) + +#define ATLAS_REG_PH_TEMP_DATA 0x0e #define ATLAS_REG_PH_DATA 0x16 +#define ATLAS_REG_EC_PROBE 0x08 +#define ATLAS_REG_EC_TEMP_DATA 0x10 +#define ATLAS_REG_EC_DATA 0x18 +#define ATLAS_REG_TDS_DATA 0x1c +#define ATLAS_REG_PSS_DATA 0x20 + #define ATLAS_PH_INT_TIME_IN_US 450000 +#define ATLAS_EC_INT_TIME_IN_US 650000 + +enum { + ATLAS_PH_SM, + ATLAS_EC_SM, +}; struct atlas_data { struct i2c_client *client; struct iio_trigger *trig; + struct atlas_device *chip; struct regmap *regmap; struct irq_work work; - __be32 buffer[4]; /* 32-bit pH data + 32-bit pad + 64-bit timestamp */ + __be32 buffer[6]; /* 96-bit data + 32-bit pad + 64-bit timestamp */ }; static const struct regmap_range atlas_volatile_ranges[] = { regmap_reg_range(ATLAS_REG_INT_CONTROL, ATLAS_REG_INT_CONTROL), regmap_reg_range(ATLAS_REG_PH_DATA, ATLAS_REG_PH_DATA + 4), + regmap_reg_range(ATLAS_REG_EC_DATA, ATLAS_REG_PSS_DATA + 4), }; static const struct regmap_access_table atlas_volatile_table = { @@ -80,13 +102,14 @@ static const struct regmap_config atlas_regmap_config = { .val_bits = 8, .volatile_table = &atlas_volatile_table, - .max_register = ATLAS_REG_PH_DATA + 4, + .max_register = ATLAS_REG_PSS_DATA + 4, .cache_type = REGCACHE_RBTREE, }; -static const struct iio_chan_spec atlas_channels[] = { +static const struct iio_chan_spec atlas_ph_channels[] = { { .type = IIO_PH, + .address = ATLAS_REG_PH_DATA, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), .scan_index = 0, @@ -100,7 +123,7 @@ static const struct iio_chan_spec atlas_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(1), { .type = IIO_TEMP, - .address = ATLAS_REG_TEMP_DATA, + .address = ATLAS_REG_PH_TEMP_DATA, .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), .output = 1, @@ -108,6 +131,142 @@ static const struct iio_chan_spec atlas_channels[] = { }, }; +#define ATLAS_EC_CHANNEL(_idx, _addr) \ + {\ + .type = IIO_CONCENTRATION, \ + .indexed = 1, \ + .channel = _idx, \ + .address = _addr, \ + .info_mask_separate = \ + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = _idx + 1, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 32, \ + .storagebits = 32, \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec atlas_ec_channels[] = { + { + .type = IIO_ELECTRICALCONDUCTIVITY, + .address = ATLAS_REG_EC_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + ATLAS_EC_CHANNEL(0, ATLAS_REG_TDS_DATA), + ATLAS_EC_CHANNEL(1, ATLAS_REG_PSS_DATA), + IIO_CHAN_SOFT_TIMESTAMP(3), + { + .type = IIO_TEMP, + .address = ATLAS_REG_EC_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +static int atlas_check_ph_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_PH_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_MID)) + dev_warn(dev, "device missing mid point calibration\n"); + + if (!(val & ATLAS_REG_PH_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + + return 0; +} + +static int atlas_check_ec_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &val, 2); + if (ret) + return ret; + + dev_info(dev, "probe set to K = %d.%.2d", be16_to_cpu(val) / 100, + be16_to_cpu(val) % 100); + + ret = regmap_read(data->regmap, ATLAS_REG_EC_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_EC_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_EC_CALIB_STATUS_DRY)) + dev_warn(dev, "device missing dry point calibration\n"); + + if (val & ATLAS_REG_EC_CALIB_STATUS_SINGLE) { + dev_warn(dev, "device using single point calibration\n"); + } else { + if (!(val & ATLAS_REG_EC_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_EC_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + } + + return 0; +} + +struct atlas_device { + const struct iio_chan_spec *channels; + int num_channels; + int data_reg; + + int (*calibration)(struct atlas_data *data); + int delay; +}; + +static struct atlas_device atlas_devices[] = { + [ATLAS_PH_SM] = { + .channels = atlas_ph_channels, + .num_channels = 3, + .data_reg = ATLAS_REG_PH_DATA, + .calibration = &atlas_check_ph_calibration, + .delay = ATLAS_PH_INT_TIME_IN_US, + }, + [ATLAS_EC_SM] = { + .channels = atlas_ec_channels, + .num_channels = 5, + .data_reg = ATLAS_REG_EC_DATA, + .calibration = &atlas_check_ec_calibration, + .delay = ATLAS_EC_INT_TIME_IN_US, + }, + +}; + static int atlas_set_powermode(struct atlas_data *data, int on) { return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on); @@ -178,8 +337,9 @@ static irqreturn_t atlas_trigger_handler(int irq, void *private) struct atlas_data *data = iio_priv(indio_dev); int ret; - ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, - (u8 *) &data->buffer, sizeof(data->buffer[0])); + ret = regmap_bulk_read(data->regmap, data->chip->data_reg, + (u8 *) &data->buffer, + sizeof(__be32) * (data->chip->num_channels - 2)); if (!ret) iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, @@ -200,7 +360,7 @@ static irqreturn_t atlas_interrupt_handler(int irq, void *private) return IRQ_HANDLED; } -static int atlas_read_ph_measurement(struct atlas_data *data, __be32 *val) +static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val) { struct device *dev = &data->client->dev; int suspended = pm_runtime_suspended(dev); @@ -213,11 +373,9 @@ static int atlas_read_ph_measurement(struct atlas_data *data, __be32 *val) } if (suspended) - usleep_range(ATLAS_PH_INT_TIME_IN_US, - ATLAS_PH_INT_TIME_IN_US + 100000); + usleep_range(data->chip->delay, data->chip->delay + 100000); - ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, - (u8 *) val, sizeof(*val)); + ret = regmap_bulk_read(data->regmap, reg, (u8 *) val, sizeof(*val)); pm_runtime_mark_last_busy(dev); pm_runtime_put_autosuspend(dev); @@ -242,12 +400,15 @@ static int atlas_read_raw(struct iio_dev *indio_dev, (u8 *) ®, sizeof(reg)); break; case IIO_PH: + case IIO_CONCENTRATION: + case IIO_ELECTRICALCONDUCTIVITY: mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) ret = -EBUSY; else - ret = atlas_read_ph_measurement(data, ®); + ret = atlas_read_measurement(data, + chan->address, ®); mutex_unlock(&indio_dev->mlock); break; @@ -271,6 +432,14 @@ static int atlas_read_raw(struct iio_dev *indio_dev, *val = 1; /* 0.001 */ *val2 = 1000; break; + case IIO_ELECTRICALCONDUCTIVITY: + *val = 1; /* 0.00001 */ + *val = 100000; + break; + case IIO_CONCENTRATION: + *val = 0; /* 0.000000001 */ + *val2 = 1000; + return IIO_VAL_INT_PLUS_NANO; default: return -EINVAL; } @@ -303,37 +472,26 @@ static const struct iio_info atlas_info = { .write_raw = atlas_write_raw, }; -static int atlas_check_calibration(struct atlas_data *data) -{ - struct device *dev = &data->client->dev; - int ret; - unsigned int val; - - ret = regmap_read(data->regmap, ATLAS_REG_CALIB_STATUS, &val); - if (ret) - return ret; - - if (!(val & ATLAS_REG_CALIB_STATUS_MASK)) { - dev_warn(dev, "device has not been calibrated\n"); - return 0; - } - - if (!(val & ATLAS_REG_CALIB_STATUS_LOW)) - dev_warn(dev, "device missing low point calibration\n"); - - if (!(val & ATLAS_REG_CALIB_STATUS_MID)) - dev_warn(dev, "device missing mid point calibration\n"); - - if (!(val & ATLAS_REG_CALIB_STATUS_HIGH)) - dev_warn(dev, "device missing high point calibration\n"); +static const struct i2c_device_id atlas_id[] = { + { "atlas-ph-sm", ATLAS_PH_SM}, + { "atlas-ec-sm", ATLAS_EC_SM}, + {} +}; +MODULE_DEVICE_TABLE(i2c, atlas_id); - return 0; +static const struct of_device_id atlas_dt_ids[] = { + { .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, }, + { .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, }, + { } }; +MODULE_DEVICE_TABLE(of, atlas_dt_ids); static int atlas_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct atlas_data *data; + struct atlas_device *chip; + const struct of_device_id *of_id; struct iio_trigger *trig; struct iio_dev *indio_dev; int ret; @@ -342,10 +500,16 @@ static int atlas_probe(struct i2c_client *client, if (!indio_dev) return -ENOMEM; + of_id = of_match_device(atlas_dt_ids, &client->dev); + if (!of_id) + chip = &atlas_devices[id->driver_data]; + else + chip = &atlas_devices[(unsigned long)of_id->data]; + indio_dev->info = &atlas_info; indio_dev->name = ATLAS_DRV_NAME; - indio_dev->channels = atlas_channels; - indio_dev->num_channels = ARRAY_SIZE(atlas_channels); + indio_dev->channels = chip->channels; + indio_dev->num_channels = chip->num_channels; indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE; indio_dev->dev.parent = &client->dev; @@ -358,6 +522,7 @@ static int atlas_probe(struct i2c_client *client, data = iio_priv(indio_dev); data->client = client; data->trig = trig; + data->chip = chip; trig->dev.parent = indio_dev->dev.parent; trig->ops = &atlas_interrupt_trigger_ops; iio_trigger_set_drvdata(trig, indio_dev); @@ -379,7 +544,7 @@ static int atlas_probe(struct i2c_client *client, return -EINVAL; } - ret = atlas_check_calibration(data); + ret = chip->calibration(data); if (ret) return ret; @@ -480,18 +645,6 @@ static const struct dev_pm_ops atlas_pm_ops = { atlas_runtime_resume, NULL) }; -static const struct i2c_device_id atlas_id[] = { - { "atlas-ph-sm", 0 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, atlas_id); - -static const struct of_device_id atlas_dt_ids[] = { - { .compatible = "atlas,ph-sm" }, - { } -}; -MODULE_DEVICE_TABLE(of, atlas_dt_ids); - static struct i2c_driver atlas_driver = { .driver = { .name = ATLAS_DRV_NAME, diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c index f1693dbebb8a..50afc0f8f16b 100644 --- a/drivers/iio/common/st_sensors/st_sensors_buffer.c +++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c @@ -22,7 +22,7 @@ #include <linux/iio/common/st_sensors.h> -int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf) +static int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf) { int i, len; int total = 0; @@ -49,7 +49,6 @@ int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf) return total; } -EXPORT_SYMBOL(st_sensors_get_buffer_element); irqreturn_t st_sensors_trigger_handler(int irq, void *p) { diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 9e59c90f6a8d..6db12ea034d3 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -228,7 +228,7 @@ int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable) } EXPORT_SYMBOL(st_sensors_set_axis_enable); -void st_sensors_power_enable(struct iio_dev *indio_dev) +int st_sensors_power_enable(struct iio_dev *indio_dev) { struct st_sensor_data *pdata = iio_priv(indio_dev); int err; @@ -237,18 +237,37 @@ void st_sensors_power_enable(struct iio_dev *indio_dev) pdata->vdd = devm_regulator_get_optional(indio_dev->dev.parent, "vdd"); if (!IS_ERR(pdata->vdd)) { err = regulator_enable(pdata->vdd); - if (err != 0) + if (err != 0) { dev_warn(&indio_dev->dev, "Failed to enable specified Vdd supply\n"); + return err; + } + } else { + err = PTR_ERR(pdata->vdd); + if (err != -ENODEV) + return err; } pdata->vdd_io = devm_regulator_get_optional(indio_dev->dev.parent, "vddio"); if (!IS_ERR(pdata->vdd_io)) { err = regulator_enable(pdata->vdd_io); - if (err != 0) + if (err != 0) { dev_warn(&indio_dev->dev, "Failed to enable specified Vdd_IO supply\n"); + goto st_sensors_disable_vdd; + } + } else { + err = PTR_ERR(pdata->vdd_io); + if (err != -ENODEV) + goto st_sensors_disable_vdd; } + + return 0; + +st_sensors_disable_vdd: + if (!IS_ERR_OR_NULL(pdata->vdd)) + regulator_disable(pdata->vdd); + return err; } EXPORT_SYMBOL(st_sensors_power_enable); @@ -256,10 +275,10 @@ void st_sensors_power_disable(struct iio_dev *indio_dev) { struct st_sensor_data *pdata = iio_priv(indio_dev); - if (!IS_ERR(pdata->vdd)) + if (!IS_ERR_OR_NULL(pdata->vdd)) regulator_disable(pdata->vdd); - if (!IS_ERR(pdata->vdd_io)) + if (!IS_ERR_OR_NULL(pdata->vdd_io)) regulator_disable(pdata->vdd_io); } EXPORT_SYMBOL(st_sensors_power_disable); diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c index 98cfee296d46..b43aa36031f8 100644 --- a/drivers/iio/common/st_sensors/st_sensors_i2c.c +++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c @@ -48,8 +48,8 @@ static int st_sensors_i2c_read_multiple_byte( if (multiread_bit) reg_addr |= ST_SENSORS_I2C_MULTIREAD; - return i2c_smbus_read_i2c_block_data(to_i2c_client(dev), - reg_addr, len, data); + return i2c_smbus_read_i2c_block_data_or_emulated(to_i2c_client(dev), + reg_addr, len, data); } static int st_sensors_i2c_write_byte(struct st_sensor_transfer_buffer *tb, diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index f7c71da42f15..ca814479fadf 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -248,11 +248,12 @@ config MCP4922 config STX104 tristate "Apex Embedded Systems STX104 DAC driver" depends on X86 && ISA_BUS_API + select GPIOLIB help - Say yes here to build support for the 2-channel DAC on the Apex - Embedded Systems STX104 integrated analog PC/104 card. The base port - addresses for the devices may be configured via the "base" module - parameter array. + Say yes here to build support for the 2-channel DAC and GPIO on the + Apex Embedded Systems STX104 integrated analog PC/104 card. The base + port addresses for the devices may be configured via the base array + module parameter. config VF610_DAC tristate "Vybrid vf610 DAC driver" diff --git a/drivers/iio/dac/ad5755.c b/drivers/iio/dac/ad5755.c index bfb350a85a16..0fde593ec0d9 100644 --- a/drivers/iio/dac/ad5755.c +++ b/drivers/iio/dac/ad5755.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/sysfs.h> #include <linux/delay.h> +#include <linux/of.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/platform_data/ad5755.h> @@ -109,6 +110,51 @@ enum ad5755_type { ID_AD5737, }; +#ifdef CONFIG_OF +static const int ad5755_dcdc_freq_table[][2] = { + { 250000, AD5755_DC_DC_FREQ_250kHZ }, + { 410000, AD5755_DC_DC_FREQ_410kHZ }, + { 650000, AD5755_DC_DC_FREQ_650kHZ } +}; + +static const int ad5755_dcdc_maxv_table[][2] = { + { 23000000, AD5755_DC_DC_MAXV_23V }, + { 24500000, AD5755_DC_DC_MAXV_24V5 }, + { 27000000, AD5755_DC_DC_MAXV_27V }, + { 29500000, AD5755_DC_DC_MAXV_29V5 }, +}; + +static const int ad5755_slew_rate_table[][2] = { + { 64000, AD5755_SLEW_RATE_64k }, + { 32000, AD5755_SLEW_RATE_32k }, + { 16000, AD5755_SLEW_RATE_16k }, + { 8000, AD5755_SLEW_RATE_8k }, + { 4000, AD5755_SLEW_RATE_4k }, + { 2000, AD5755_SLEW_RATE_2k }, + { 1000, AD5755_SLEW_RATE_1k }, + { 500, AD5755_SLEW_RATE_500 }, + { 250, AD5755_SLEW_RATE_250 }, + { 125, AD5755_SLEW_RATE_125 }, + { 64, AD5755_SLEW_RATE_64 }, + { 32, AD5755_SLEW_RATE_32 }, + { 16, AD5755_SLEW_RATE_16 }, + { 8, AD5755_SLEW_RATE_8 }, + { 4, AD5755_SLEW_RATE_4 }, + { 0, AD5755_SLEW_RATE_0_5 }, +}; + +static const int ad5755_slew_step_table[][2] = { + { 256, AD5755_SLEW_STEP_SIZE_256 }, + { 128, AD5755_SLEW_STEP_SIZE_128 }, + { 64, AD5755_SLEW_STEP_SIZE_64 }, + { 32, AD5755_SLEW_STEP_SIZE_32 }, + { 16, AD5755_SLEW_STEP_SIZE_16 }, + { 4, AD5755_SLEW_STEP_SIZE_4 }, + { 2, AD5755_SLEW_STEP_SIZE_2 }, + { 1, AD5755_SLEW_STEP_SIZE_1 }, +}; +#endif + static int ad5755_write_unlocked(struct iio_dev *indio_dev, unsigned int reg, unsigned int val) { @@ -556,6 +602,129 @@ static const struct ad5755_platform_data ad5755_default_pdata = { }, }; +#ifdef CONFIG_OF +static struct ad5755_platform_data *ad5755_parse_dt(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct device_node *pp; + struct ad5755_platform_data *pdata; + unsigned int tmp; + unsigned int tmparray[3]; + int devnr, i; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + pdata->ext_dc_dc_compenstation_resistor = + of_property_read_bool(np, "adi,ext-dc-dc-compenstation-resistor"); + + if (!of_property_read_u32(np, "adi,dc-dc-phase", &tmp)) + pdata->dc_dc_phase = tmp; + else + pdata->dc_dc_phase = AD5755_DC_DC_PHASE_ALL_SAME_EDGE; + + pdata->dc_dc_freq = AD5755_DC_DC_FREQ_410kHZ; + if (!of_property_read_u32(np, "adi,dc-dc-freq-hz", &tmp)) { + for (i = 0; i < ARRAY_SIZE(ad5755_dcdc_freq_table); i++) { + if (tmp == ad5755_dcdc_freq_table[i][0]) { + pdata->dc_dc_freq = ad5755_dcdc_freq_table[i][1]; + break; + } + } + + if (i == ARRAY_SIZE(ad5755_dcdc_freq_table)) { + dev_err(dev, + "adi,dc-dc-freq out of range selecting 410kHz"); + } + } + + pdata->dc_dc_maxv = AD5755_DC_DC_MAXV_23V; + if (!of_property_read_u32(np, "adi,dc-dc-max-microvolt", &tmp)) { + for (i = 0; i < ARRAY_SIZE(ad5755_dcdc_maxv_table); i++) { + if (tmp == ad5755_dcdc_maxv_table[i][0]) { + pdata->dc_dc_maxv = ad5755_dcdc_maxv_table[i][1]; + break; + } + } + if (i == ARRAY_SIZE(ad5755_dcdc_maxv_table)) { + dev_err(dev, + "adi,dc-dc-maxv out of range selecting 23V"); + } + } + + devnr = 0; + for_each_child_of_node(np, pp) { + if (devnr > AD5755_NUM_CHANNELS) { + dev_err(dev, + "There is to many channels defined in DT\n"); + goto error_out; + } + + if (!of_property_read_u32(pp, "adi,mode", &tmp)) + pdata->dac[devnr].mode = tmp; + else + pdata->dac[devnr].mode = AD5755_MODE_CURRENT_4mA_20mA; + + pdata->dac[devnr].ext_current_sense_resistor = + of_property_read_bool(pp, "adi,ext-current-sense-resistor"); + + pdata->dac[devnr].enable_voltage_overrange = + of_property_read_bool(pp, "adi,enable-voltage-overrange"); + + if (!of_property_read_u32_array(pp, "adi,slew", tmparray, 3)) { + pdata->dac[devnr].slew.enable = tmparray[0]; + + pdata->dac[devnr].slew.rate = AD5755_SLEW_RATE_64k; + for (i = 0; i < ARRAY_SIZE(ad5755_slew_rate_table); i++) { + if (tmparray[1] == ad5755_slew_rate_table[i][0]) { + pdata->dac[devnr].slew.rate = + ad5755_slew_rate_table[i][1]; + break; + } + } + if (i == ARRAY_SIZE(ad5755_slew_rate_table)) { + dev_err(dev, + "channel %d slew rate out of range selecting 64kHz", + devnr); + } + + pdata->dac[devnr].slew.step_size = AD5755_SLEW_STEP_SIZE_1; + for (i = 0; i < ARRAY_SIZE(ad5755_slew_step_table); i++) { + if (tmparray[2] == ad5755_slew_step_table[i][0]) { + pdata->dac[devnr].slew.step_size = + ad5755_slew_step_table[i][1]; + break; + } + } + if (i == ARRAY_SIZE(ad5755_slew_step_table)) { + dev_err(dev, + "channel %d slew step size out of range selecting 1 LSB", + devnr); + } + } else { + pdata->dac[devnr].slew.enable = false; + pdata->dac[devnr].slew.rate = AD5755_SLEW_RATE_64k; + pdata->dac[devnr].slew.step_size = + AD5755_SLEW_STEP_SIZE_1; + } + devnr++; + } + + return pdata; + + error_out: + devm_kfree(dev, pdata); + return NULL; +} +#else +static +struct ad5755_platform_data *ad5755_parse_dt(struct device *dev) +{ + return NULL; +} +#endif + static int ad5755_probe(struct spi_device *spi) { enum ad5755_type type = spi_get_device_id(spi)->driver_data; @@ -583,8 +752,15 @@ static int ad5755_probe(struct spi_device *spi) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->num_channels = AD5755_NUM_CHANNELS; - if (!pdata) + if (spi->dev.of_node) + pdata = ad5755_parse_dt(&spi->dev); + else + pdata = spi->dev.platform_data; + + if (!pdata) { + dev_warn(&spi->dev, "no platform data? using default\n"); pdata = &ad5755_default_pdata; + } ret = ad5755_init_channels(indio_dev, pdata); if (ret) @@ -607,6 +783,16 @@ static const struct spi_device_id ad5755_id[] = { }; MODULE_DEVICE_TABLE(spi, ad5755_id); +static const struct of_device_id ad5755_of_match[] = { + { .compatible = "adi,ad5755" }, + { .compatible = "adi,ad5755-1" }, + { .compatible = "adi,ad5757" }, + { .compatible = "adi,ad5735" }, + { .compatible = "adi,ad5737" }, + { } +}; +MODULE_DEVICE_TABLE(of, ad5755_of_match); + static struct spi_driver ad5755_driver = { .driver = { .name = "ad5755", diff --git a/drivers/iio/dac/stx104.c b/drivers/iio/dac/stx104.c index 27941220872f..792a97164cb2 100644 --- a/drivers/iio/dac/stx104.c +++ b/drivers/iio/dac/stx104.c @@ -14,6 +14,7 @@ #include <linux/bitops.h> #include <linux/device.h> #include <linux/errno.h> +#include <linux/gpio/driver.h> #include <linux/iio/iio.h> #include <linux/iio/types.h> #include <linux/io.h> @@ -21,6 +22,7 @@ #include <linux/isa.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/spinlock.h> #define STX104_NUM_CHAN 2 @@ -49,6 +51,20 @@ struct stx104_iio { unsigned base; }; +/** + * struct stx104_gpio - GPIO device private data structure + * @chip: instance of the gpio_chip + * @lock: synchronization lock to prevent I/O race conditions + * @base: base port address of the GPIO device + * @out_state: output bits state + */ +struct stx104_gpio { + struct gpio_chip chip; + spinlock_t lock; + unsigned int base; + unsigned int out_state; +}; + static int stx104_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { @@ -88,15 +104,81 @@ static const struct iio_chan_spec stx104_channels[STX104_NUM_CHAN] = { STX104_CHAN(1) }; +static int stx104_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + if (offset < 4) + return 1; + + return 0; +} + +static int stx104_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + if (offset >= 4) + return -EINVAL; + + return 0; +} + +static int stx104_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + if (offset < 4) + return -EINVAL; + + chip->set(chip, offset, value); + return 0; +} + +static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + + if (offset >= 4) + return -EINVAL; + + return !!(inb(stx104gpio->base) & BIT(offset)); +} + +static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip); + const unsigned int mask = BIT(offset) >> 4; + unsigned long flags; + + if (offset < 4) + return; + + spin_lock_irqsave(&stx104gpio->lock, flags); + + if (value) + stx104gpio->out_state |= mask; + else + stx104gpio->out_state &= ~mask; + + outb(stx104gpio->out_state, stx104gpio->base); + + spin_unlock_irqrestore(&stx104gpio->lock, flags); +} + static int stx104_probe(struct device *dev, unsigned int id) { struct iio_dev *indio_dev; struct stx104_iio *priv; + struct stx104_gpio *stx104gpio; + int err; indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); if (!indio_dev) return -ENOMEM; + stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL); + if (!stx104gpio) + return -ENOMEM; + if (!devm_request_region(dev, base[id], STX104_EXTENT, dev_name(dev))) { dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", @@ -117,14 +199,53 @@ static int stx104_probe(struct device *dev, unsigned int id) outw(0, base[id] + 4); outw(0, base[id] + 6); - return devm_iio_device_register(dev, indio_dev); + err = devm_iio_device_register(dev, indio_dev); + if (err) { + dev_err(dev, "IIO device registering failed (%d)\n", err); + return err; + } + + stx104gpio->chip.label = dev_name(dev); + stx104gpio->chip.parent = dev; + stx104gpio->chip.owner = THIS_MODULE; + stx104gpio->chip.base = -1; + stx104gpio->chip.ngpio = 8; + stx104gpio->chip.get_direction = stx104_gpio_get_direction; + stx104gpio->chip.direction_input = stx104_gpio_direction_input; + stx104gpio->chip.direction_output = stx104_gpio_direction_output; + stx104gpio->chip.get = stx104_gpio_get; + stx104gpio->chip.set = stx104_gpio_set; + stx104gpio->base = base[id] + 3; + stx104gpio->out_state = 0x0; + + spin_lock_init(&stx104gpio->lock); + + dev_set_drvdata(dev, stx104gpio); + + err = gpiochip_add_data(&stx104gpio->chip, stx104gpio); + if (err) { + dev_err(dev, "GPIO registering failed (%d)\n", err); + return err; + } + + return 0; +} + +static int stx104_remove(struct device *dev, unsigned int id) +{ + struct stx104_gpio *const stx104gpio = dev_get_drvdata(dev); + + gpiochip_remove(&stx104gpio->chip); + + return 0; } static struct isa_driver stx104_driver = { .probe = stx104_probe, .driver = { .name = "stx104" - } + }, + .remove = stx104_remove }; module_isa_driver(stx104_driver, num_stx104); diff --git a/drivers/iio/dummy/Kconfig b/drivers/iio/dummy/Kconfig index 71805ced1aae..aa5824d96a43 100644 --- a/drivers/iio/dummy/Kconfig +++ b/drivers/iio/dummy/Kconfig @@ -10,6 +10,7 @@ config IIO_DUMMY_EVGEN config IIO_SIMPLE_DUMMY tristate "An example driver with no hardware requirements" + depends on IIO_SW_DEVICE help Driver intended mainly as documentation for how to write a driver. May also be useful for testing userspace code diff --git a/drivers/iio/dummy/iio_simple_dummy.c b/drivers/iio/dummy/iio_simple_dummy.c index 43fe4ba7d0dc..ad3410e528b6 100644 --- a/drivers/iio/dummy/iio_simple_dummy.c +++ b/drivers/iio/dummy/iio_simple_dummy.c @@ -17,26 +17,18 @@ #include <linux/kernel.h> #include <linux/slab.h> #include <linux/module.h> +#include <linux/string.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> #include <linux/iio/events.h> #include <linux/iio/buffer.h> +#include <linux/iio/sw_device.h> #include "iio_simple_dummy.h" -/* - * A few elements needed to fake a bus for this driver - * Note instances parameter controls how many of these - * dummy devices are registered. - */ -static unsigned instances = 1; -module_param(instances, uint, 0); - -/* Pointer array used to fake bus elements */ -static struct iio_dev **iio_dummy_devs; - -/* Fake a name for the part number, usually obtained from the id table */ -static const char *iio_dummy_part_number = "iio_dummy_part_no"; +static struct config_item_type iio_dummy_type = { + .ct_owner = THIS_MODULE, +}; /** * struct iio_dummy_accel_calibscale - realworld to register mapping @@ -572,12 +564,18 @@ static int iio_dummy_init_device(struct iio_dev *indio_dev) * const struct i2c_device_id *id) * SPI: iio_dummy_probe(struct spi_device *spi) */ -static int iio_dummy_probe(int index) +static struct iio_sw_device *iio_dummy_probe(const char *name) { int ret; struct iio_dev *indio_dev; struct iio_dummy_state *st; + struct iio_sw_device *swd; + swd = kzalloc(sizeof(*swd), GFP_KERNEL); + if (!swd) { + ret = -ENOMEM; + goto error_kzalloc; + } /* * Allocate an IIO device. * @@ -608,7 +606,7 @@ static int iio_dummy_probe(int index) * i2c_set_clientdata(client, indio_dev); * spi_set_drvdata(spi, indio_dev); */ - iio_dummy_devs[index] = indio_dev; + swd->device = indio_dev; /* * Set the device name. @@ -619,7 +617,7 @@ static int iio_dummy_probe(int index) * indio_dev->name = id->name; * indio_dev->name = spi_get_device_id(spi)->name; */ - indio_dev->name = iio_dummy_part_number; + indio_dev->name = kstrdup(name, GFP_KERNEL); /* Provide description of available channels */ indio_dev->channels = iio_dummy_channels; @@ -646,7 +644,9 @@ static int iio_dummy_probe(int index) if (ret < 0) goto error_unconfigure_buffer; - return 0; + iio_swd_group_init_type_name(swd, name, &iio_dummy_type); + + return swd; error_unconfigure_buffer: iio_simple_dummy_unconfigure_buffer(indio_dev); error_unregister_events: @@ -654,16 +654,18 @@ error_unregister_events: error_free_device: iio_device_free(indio_dev); error_ret: - return ret; + kfree(swd); +error_kzalloc: + return ERR_PTR(ret); } /** * iio_dummy_remove() - device instance removal function - * @index: device index. + * @swd: pointer to software IIO device abstraction * * Parameters follow those of iio_dummy_probe for buses. */ -static void iio_dummy_remove(int index) +static int iio_dummy_remove(struct iio_sw_device *swd) { /* * Get a pointer to the device instance iio_dev structure @@ -671,7 +673,7 @@ static void iio_dummy_remove(int index) * struct iio_dev *indio_dev = i2c_get_clientdata(client); * struct iio_dev *indio_dev = spi_get_drvdata(spi); */ - struct iio_dev *indio_dev = iio_dummy_devs[index]; + struct iio_dev *indio_dev = swd->device; /* Unregister the device */ iio_device_unregister(indio_dev); @@ -684,11 +686,13 @@ static void iio_dummy_remove(int index) iio_simple_dummy_events_unregister(indio_dev); /* Free all structures */ + kfree(indio_dev->name); iio_device_free(indio_dev); -} + return 0; +} /** - * iio_dummy_init() - device driver registration + * module_iio_sw_device_driver() - device driver registration * * Varies depending on bus type of the device. As there is no device * here, call probe directly. For information on device registration @@ -697,50 +701,18 @@ static void iio_dummy_remove(int index) * spi: * Documentation/spi/spi-summary */ -static __init int iio_dummy_init(void) -{ - int i, ret; - - if (instances > 10) { - instances = 1; - return -EINVAL; - } - - /* Fake a bus */ - iio_dummy_devs = kcalloc(instances, sizeof(*iio_dummy_devs), - GFP_KERNEL); - /* Here we have no actual device so call probe */ - for (i = 0; i < instances; i++) { - ret = iio_dummy_probe(i); - if (ret < 0) - goto error_remove_devs; - } - return 0; - -error_remove_devs: - while (i--) - iio_dummy_remove(i); - - kfree(iio_dummy_devs); - return ret; -} -module_init(iio_dummy_init); +static const struct iio_sw_device_ops iio_dummy_device_ops = { + .probe = iio_dummy_probe, + .remove = iio_dummy_remove, +}; -/** - * iio_dummy_exit() - device driver removal - * - * Varies depending on bus type of the device. - * As there is no device here, call remove directly. - */ -static __exit void iio_dummy_exit(void) -{ - int i; +static struct iio_sw_device_type iio_dummy_device = { + .name = "dummy", + .owner = THIS_MODULE, + .ops = &iio_dummy_device_ops, +}; - for (i = 0; i < instances; i++) - iio_dummy_remove(i); - kfree(iio_dummy_devs); -} -module_exit(iio_dummy_exit); +module_iio_sw_device_driver(iio_dummy_device); MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); MODULE_DESCRIPTION("IIO dummy driver"); diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index a8012955a1f6..aea034d8fe0f 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -426,13 +426,15 @@ int st_gyro_common_probe(struct iio_dev *indio_dev) indio_dev->info = &gyro_info; mutex_init(&gdata->tb.buf_lock); - st_sensors_power_enable(indio_dev); + err = st_sensors_power_enable(indio_dev); + if (err) + return err; err = st_sensors_check_device_support(indio_dev, ARRAY_SIZE(st_gyro_sensors_settings), st_gyro_sensors_settings); if (err < 0) - return err; + goto st_gyro_power_off; gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS; gdata->multiread_bit = gdata->sensor_settings->multi_read_bit; @@ -446,11 +448,11 @@ int st_gyro_common_probe(struct iio_dev *indio_dev) err = st_sensors_init_sensor(indio_dev, (struct st_sensors_platform_data *)&gyro_pdata); if (err < 0) - return err; + goto st_gyro_power_off; err = st_gyro_allocate_ring(indio_dev); if (err < 0) - return err; + goto st_gyro_power_off; if (irq > 0) { err = st_sensors_allocate_trigger(indio_dev, @@ -473,6 +475,8 @@ st_gyro_device_register_error: st_sensors_deallocate_trigger(indio_dev); st_gyro_probe_trigger_error: st_gyro_deallocate_ring(indio_dev); +st_gyro_power_off: + st_sensors_power_disable(indio_dev); return err; } diff --git a/drivers/iio/health/afe4403.c b/drivers/iio/health/afe4403.c index 88e43f87b926..9a081465c42f 100644 --- a/drivers/iio/health/afe4403.c +++ b/drivers/iio/health/afe4403.c @@ -1,7 +1,7 @@ /* * AFE4403 Heart Rate Monitors and Low-Cost Pulse Oximeters * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or modify @@ -39,127 +39,90 @@ #define AFE4403_TIAGAIN 0x20 #define AFE4403_TIA_AMB_GAIN 0x21 -/* AFE4403 GAIN register fields */ -#define AFE4403_TIAGAIN_RES_MASK GENMASK(2, 0) -#define AFE4403_TIAGAIN_RES_SHIFT 0 -#define AFE4403_TIAGAIN_CAP_MASK GENMASK(7, 3) -#define AFE4403_TIAGAIN_CAP_SHIFT 3 - -/* AFE4403 LEDCNTRL register fields */ -#define AFE440X_LEDCNTRL_LED1_MASK GENMASK(15, 8) -#define AFE440X_LEDCNTRL_LED1_SHIFT 8 -#define AFE440X_LEDCNTRL_LED2_MASK GENMASK(7, 0) -#define AFE440X_LEDCNTRL_LED2_SHIFT 0 -#define AFE440X_LEDCNTRL_LED_RANGE_MASK GENMASK(17, 16) -#define AFE440X_LEDCNTRL_LED_RANGE_SHIFT 16 - -/* AFE4403 CONTROL2 register fields */ -#define AFE440X_CONTROL2_PWR_DWN_TX BIT(2) -#define AFE440X_CONTROL2_EN_SLOW_DIAG BIT(8) -#define AFE440X_CONTROL2_DIAG_OUT_TRI BIT(10) -#define AFE440X_CONTROL2_TX_BRDG_MOD BIT(11) -#define AFE440X_CONTROL2_TX_REF_MASK GENMASK(18, 17) -#define AFE440X_CONTROL2_TX_REF_SHIFT 17 - -/* AFE4404 NULL fields */ -#define NULL_MASK 0 -#define NULL_SHIFT 0 - -/* AFE4403 LEDCNTRL values */ -#define AFE440X_LEDCNTRL_RANGE_TX_HALF 0x1 -#define AFE440X_LEDCNTRL_RANGE_TX_FULL 0x2 -#define AFE440X_LEDCNTRL_RANGE_TX_OFF 0x3 - -/* AFE4403 CONTROL2 values */ -#define AFE440X_CONTROL2_TX_REF_025 0x0 -#define AFE440X_CONTROL2_TX_REF_050 0x1 -#define AFE440X_CONTROL2_TX_REF_100 0x2 -#define AFE440X_CONTROL2_TX_REF_075 0x3 - -/* AFE4403 CONTROL3 values */ -#define AFE440X_CONTROL3_CLK_DIV_2 0x0 -#define AFE440X_CONTROL3_CLK_DIV_4 0x2 -#define AFE440X_CONTROL3_CLK_DIV_6 0x3 -#define AFE440X_CONTROL3_CLK_DIV_8 0x4 -#define AFE440X_CONTROL3_CLK_DIV_12 0x5 -#define AFE440X_CONTROL3_CLK_DIV_1 0x7 - -/* AFE4403 TIAGAIN_CAP values */ -#define AFE4403_TIAGAIN_CAP_5_P 0x0 -#define AFE4403_TIAGAIN_CAP_10_P 0x1 -#define AFE4403_TIAGAIN_CAP_20_P 0x2 -#define AFE4403_TIAGAIN_CAP_30_P 0x3 -#define AFE4403_TIAGAIN_CAP_55_P 0x8 -#define AFE4403_TIAGAIN_CAP_155_P 0x10 - -/* AFE4403 TIAGAIN_RES values */ -#define AFE4403_TIAGAIN_RES_500_K 0x0 -#define AFE4403_TIAGAIN_RES_250_K 0x1 -#define AFE4403_TIAGAIN_RES_100_K 0x2 -#define AFE4403_TIAGAIN_RES_50_K 0x3 -#define AFE4403_TIAGAIN_RES_25_K 0x4 -#define AFE4403_TIAGAIN_RES_10_K 0x5 -#define AFE4403_TIAGAIN_RES_1_M 0x6 -#define AFE4403_TIAGAIN_RES_NONE 0x7 +enum afe4403_fields { + /* Gains */ + F_RF_LED1, F_CF_LED1, + F_RF_LED, F_CF_LED, + + /* LED Current */ + F_ILED1, F_ILED2, + + /* sentinel */ + F_MAX_FIELDS +}; + +static const struct reg_field afe4403_reg_fields[] = { + /* Gains */ + [F_RF_LED1] = REG_FIELD(AFE4403_TIAGAIN, 0, 2), + [F_CF_LED1] = REG_FIELD(AFE4403_TIAGAIN, 3, 7), + [F_RF_LED] = REG_FIELD(AFE4403_TIA_AMB_GAIN, 0, 2), + [F_CF_LED] = REG_FIELD(AFE4403_TIA_AMB_GAIN, 3, 7), + /* LED Current */ + [F_ILED1] = REG_FIELD(AFE440X_LEDCNTRL, 0, 7), + [F_ILED2] = REG_FIELD(AFE440X_LEDCNTRL, 8, 15), +}; /** - * struct afe4403_data - * @dev - Device structure - * @spi - SPI device handle - * @regmap - Register map of the device - * @regulator - Pointer to the regulator for the IC - * @trig - IIO trigger for this device - * @irq - ADC_RDY line interrupt number + * struct afe4403_data - AFE4403 device instance data + * @dev: Device structure + * @spi: SPI device handle + * @regmap: Register map of the device + * @fields: Register fields of the device + * @regulator: Pointer to the regulator for the IC + * @trig: IIO trigger for this device + * @irq: ADC_RDY line interrupt number */ struct afe4403_data { struct device *dev; struct spi_device *spi; struct regmap *regmap; + struct regmap_field *fields[F_MAX_FIELDS]; struct regulator *regulator; struct iio_trigger *trig; int irq; }; enum afe4403_chan_id { + LED2 = 1, + ALED2, LED1, ALED1, - LED2, - ALED2, - LED1_ALED1, LED2_ALED2, - ILED1, - ILED2, + LED1_ALED1, }; -static const struct afe440x_reg_info afe4403_reg_info[] = { - [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, 0, NULL), - [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, 0, NULL), - [LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, 0, NULL), - [ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, 0, NULL), - [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL), - [LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL), - [ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED1), - [ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE440X_LEDCNTRL_LED2), +static const unsigned int afe4403_channel_values[] = { + [LED2] = AFE440X_LED2VAL, + [ALED2] = AFE440X_ALED2VAL, + [LED1] = AFE440X_LED1VAL, + [ALED1] = AFE440X_ALED1VAL, + [LED2_ALED2] = AFE440X_LED2_ALED2VAL, + [LED1_ALED1] = AFE440X_LED1_ALED1VAL, +}; + +static const unsigned int afe4403_channel_leds[] = { + [LED2] = F_ILED2, + [LED1] = F_ILED1, }; static const struct iio_chan_spec afe4403_channels[] = { /* ADC values */ - AFE440X_INTENSITY_CHAN(LED1, "led1", 0), - AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", 0), - AFE440X_INTENSITY_CHAN(LED2, "led2", 0), - AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", 0), - AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0), - AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2, 0), + AFE440X_INTENSITY_CHAN(ALED2, 0), + AFE440X_INTENSITY_CHAN(LED1, 0), + AFE440X_INTENSITY_CHAN(ALED1, 0), + AFE440X_INTENSITY_CHAN(LED2_ALED2, 0), + AFE440X_INTENSITY_CHAN(LED1_ALED1, 0), /* LED current */ - AFE440X_CURRENT_CHAN(ILED1, "led1"), - AFE440X_CURRENT_CHAN(ILED2, "led2"), + AFE440X_CURRENT_CHAN(LED2), + AFE440X_CURRENT_CHAN(LED1), }; static const struct afe440x_val_table afe4403_res_table[] = { { 500000 }, { 250000 }, { 100000 }, { 50000 }, { 25000 }, { 10000 }, { 1000000 }, { 0 }, }; -AFE440X_TABLE_ATTR(tia_resistance_available, afe4403_res_table); +AFE440X_TABLE_ATTR(in_intensity_resistance_available, afe4403_res_table); static const struct afe440x_val_table afe4403_cap_table[] = { { 0, 5000 }, { 0, 10000 }, { 0, 20000 }, { 0, 25000 }, @@ -171,7 +134,7 @@ static const struct afe440x_val_table afe4403_cap_table[] = { { 0, 205000 }, { 0, 210000 }, { 0, 220000 }, { 0, 225000 }, { 0, 230000 }, { 0, 235000 }, { 0, 245000 }, { 0, 250000 }, }; -AFE440X_TABLE_ATTR(tia_capacitance_available, afe4403_cap_table); +AFE440X_TABLE_ATTR(in_intensity_capacitance_available, afe4403_cap_table); static ssize_t afe440x_show_register(struct device *dev, struct device_attribute *attr, @@ -180,38 +143,21 @@ static ssize_t afe440x_show_register(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct afe4403_data *afe = iio_priv(indio_dev); struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); - unsigned int reg_val, type; + unsigned int reg_val; int vals[2]; - int ret, val_len; + int ret; - ret = regmap_read(afe->regmap, afe440x_attr->reg, ®_val); + ret = regmap_field_read(afe->fields[afe440x_attr->field], ®_val); if (ret) return ret; - reg_val &= afe440x_attr->mask; - reg_val >>= afe440x_attr->shift; - - switch (afe440x_attr->type) { - case SIMPLE: - type = IIO_VAL_INT; - val_len = 1; - vals[0] = reg_val; - break; - case RESISTANCE: - case CAPACITANCE: - type = IIO_VAL_INT_PLUS_MICRO; - val_len = 2; - if (reg_val < afe440x_attr->table_size) { - vals[0] = afe440x_attr->val_table[reg_val].integer; - vals[1] = afe440x_attr->val_table[reg_val].fract; - break; - } - return -EINVAL; - default: + if (reg_val >= afe440x_attr->table_size) return -EINVAL; - } - return iio_format_value(buf, type, val_len, vals); + vals[0] = afe440x_attr->val_table[reg_val].integer; + vals[1] = afe440x_attr->val_table[reg_val].fract; + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals); } static ssize_t afe440x_store_register(struct device *dev, @@ -227,48 +173,43 @@ static ssize_t afe440x_store_register(struct device *dev, if (ret) return ret; - switch (afe440x_attr->type) { - case SIMPLE: - val = integer; - break; - case RESISTANCE: - case CAPACITANCE: - for (val = 0; val < afe440x_attr->table_size; val++) - if (afe440x_attr->val_table[val].integer == integer && - afe440x_attr->val_table[val].fract == fract) - break; - if (val == afe440x_attr->table_size) - return -EINVAL; - break; - default: + for (val = 0; val < afe440x_attr->table_size; val++) + if (afe440x_attr->val_table[val].integer == integer && + afe440x_attr->val_table[val].fract == fract) + break; + if (val == afe440x_attr->table_size) return -EINVAL; - } - ret = regmap_update_bits(afe->regmap, afe440x_attr->reg, - afe440x_attr->mask, - (val << afe440x_attr->shift)); + ret = regmap_field_write(afe->fields[afe440x_attr->field], val); if (ret) return ret; return count; } -static AFE440X_ATTR(tia_separate_en, AFE4403_TIAGAIN, AFE440X_TIAGAIN_ENSEPGAIN, SIMPLE, NULL, 0); +static AFE440X_ATTR(in_intensity1_resistance, F_RF_LED, afe4403_res_table); +static AFE440X_ATTR(in_intensity1_capacitance, F_CF_LED, afe4403_cap_table); + +static AFE440X_ATTR(in_intensity2_resistance, F_RF_LED, afe4403_res_table); +static AFE440X_ATTR(in_intensity2_capacitance, F_CF_LED, afe4403_cap_table); -static AFE440X_ATTR(tia_resistance1, AFE4403_TIAGAIN, AFE4403_TIAGAIN_RES, RESISTANCE, afe4403_res_table, ARRAY_SIZE(afe4403_res_table)); -static AFE440X_ATTR(tia_capacitance1, AFE4403_TIAGAIN, AFE4403_TIAGAIN_CAP, CAPACITANCE, afe4403_cap_table, ARRAY_SIZE(afe4403_cap_table)); +static AFE440X_ATTR(in_intensity3_resistance, F_RF_LED1, afe4403_res_table); +static AFE440X_ATTR(in_intensity3_capacitance, F_CF_LED1, afe4403_cap_table); -static AFE440X_ATTR(tia_resistance2, AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES, RESISTANCE, afe4403_res_table, ARRAY_SIZE(afe4403_res_table)); -static AFE440X_ATTR(tia_capacitance2, AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES, CAPACITANCE, afe4403_cap_table, ARRAY_SIZE(afe4403_cap_table)); +static AFE440X_ATTR(in_intensity4_resistance, F_RF_LED1, afe4403_res_table); +static AFE440X_ATTR(in_intensity4_capacitance, F_CF_LED1, afe4403_cap_table); static struct attribute *afe440x_attributes[] = { - &afe440x_attr_tia_separate_en.dev_attr.attr, - &afe440x_attr_tia_resistance1.dev_attr.attr, - &afe440x_attr_tia_capacitance1.dev_attr.attr, - &afe440x_attr_tia_resistance2.dev_attr.attr, - &afe440x_attr_tia_capacitance2.dev_attr.attr, - &dev_attr_tia_resistance_available.attr, - &dev_attr_tia_capacitance_available.attr, + &dev_attr_in_intensity_resistance_available.attr, + &dev_attr_in_intensity_capacitance_available.attr, + &afe440x_attr_in_intensity1_resistance.dev_attr.attr, + &afe440x_attr_in_intensity1_capacitance.dev_attr.attr, + &afe440x_attr_in_intensity2_resistance.dev_attr.attr, + &afe440x_attr_in_intensity2_capacitance.dev_attr.attr, + &afe440x_attr_in_intensity3_resistance.dev_attr.attr, + &afe440x_attr_in_intensity3_capacitance.dev_attr.attr, + &afe440x_attr_in_intensity4_resistance.dev_attr.attr, + &afe440x_attr_in_intensity4_capacitance.dev_attr.attr, NULL }; @@ -309,35 +250,26 @@ static int afe4403_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct afe4403_data *afe = iio_priv(indio_dev); - const struct afe440x_reg_info reg_info = afe4403_reg_info[chan->address]; + unsigned int reg = afe4403_channel_values[chan->address]; + unsigned int field = afe4403_channel_leds[chan->address]; int ret; switch (chan->type) { case IIO_INTENSITY: switch (mask) { case IIO_CHAN_INFO_RAW: - ret = afe4403_read(afe, reg_info.reg, val); - if (ret) - return ret; - return IIO_VAL_INT; - case IIO_CHAN_INFO_OFFSET: - ret = regmap_read(afe->regmap, reg_info.offreg, - val); + ret = afe4403_read(afe, reg, val); if (ret) return ret; - *val &= reg_info.mask; - *val >>= reg_info.shift; return IIO_VAL_INT; } break; case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: - ret = regmap_read(afe->regmap, reg_info.reg, val); + ret = regmap_field_read(afe->fields[field], val); if (ret) return ret; - *val &= reg_info.mask; - *val >>= reg_info.shift; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; @@ -357,25 +289,13 @@ static int afe4403_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct afe4403_data *afe = iio_priv(indio_dev); - const struct afe440x_reg_info reg_info = afe4403_reg_info[chan->address]; + unsigned int field = afe4403_channel_leds[chan->address]; switch (chan->type) { - case IIO_INTENSITY: - switch (mask) { - case IIO_CHAN_INFO_OFFSET: - return regmap_update_bits(afe->regmap, - reg_info.offreg, - reg_info.mask, - (val << reg_info.shift)); - } - break; case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: - return regmap_update_bits(afe->regmap, - reg_info.reg, - reg_info.mask, - (val << reg_info.shift)); + return regmap_field_write(afe->fields[field], val); } break; default: @@ -410,7 +330,7 @@ static irqreturn_t afe4403_trigger_handler(int irq, void *private) for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { ret = spi_write_then_read(afe->spi, - &afe4403_reg_info[bit].reg, 1, + &afe4403_channel_values[bit], 1, rx, 3); if (ret) goto err; @@ -472,12 +392,8 @@ static const struct iio_trigger_ops afe4403_trigger_ops = { static const struct reg_sequence afe4403_reg_sequences[] = { AFE4403_TIMING_PAIRS, - { AFE440X_CONTROL1, AFE440X_CONTROL1_TIMEREN | 0x000007}, - { AFE4403_TIA_AMB_GAIN, AFE4403_TIAGAIN_RES_1_M }, - { AFE440X_LEDCNTRL, (0x14 << AFE440X_LEDCNTRL_LED1_SHIFT) | - (0x14 << AFE440X_LEDCNTRL_LED2_SHIFT) }, - { AFE440X_CONTROL2, AFE440X_CONTROL2_TX_REF_050 << - AFE440X_CONTROL2_TX_REF_SHIFT }, + { AFE440X_CONTROL1, AFE440X_CONTROL1_TIMEREN }, + { AFE4403_TIAGAIN, AFE440X_TIAGAIN_ENSEPGAIN }, }; static const struct regmap_range afe4403_yes_ranges[] = { @@ -498,13 +414,11 @@ static const struct regmap_config afe4403_regmap_config = { .volatile_table = &afe4403_volatile_table, }; -#ifdef CONFIG_OF static const struct of_device_id afe4403_of_match[] = { { .compatible = "ti,afe4403", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, afe4403_of_match); -#endif static int __maybe_unused afe4403_suspend(struct device *dev) { @@ -553,7 +467,7 @@ static int afe4403_probe(struct spi_device *spi) { struct iio_dev *indio_dev; struct afe4403_data *afe; - int ret; + int i, ret; indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*afe)); if (!indio_dev) @@ -572,6 +486,15 @@ static int afe4403_probe(struct spi_device *spi) return PTR_ERR(afe->regmap); } + for (i = 0; i < F_MAX_FIELDS; i++) { + afe->fields[i] = devm_regmap_field_alloc(afe->dev, afe->regmap, + afe4403_reg_fields[i]); + if (IS_ERR(afe->fields[i])) { + dev_err(afe->dev, "Unable to allocate regmap fields\n"); + return PTR_ERR(afe->fields[i]); + } + } + afe->regulator = devm_regulator_get(afe->dev, "tx_sup"); if (IS_ERR(afe->regulator)) { dev_err(afe->dev, "Unable to get regulator\n"); @@ -694,7 +617,7 @@ MODULE_DEVICE_TABLE(spi, afe4403_ids); static struct spi_driver afe4403_spi_driver = { .driver = { .name = AFE4403_DRIVER_NAME, - .of_match_table = of_match_ptr(afe4403_of_match), + .of_match_table = afe4403_of_match, .pm = &afe4403_pm_ops, }, .probe = afe4403_probe, @@ -704,5 +627,5 @@ static struct spi_driver afe4403_spi_driver = { module_spi_driver(afe4403_spi_driver); MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); -MODULE_DESCRIPTION("TI AFE4403 Heart Rate and Pulse Oximeter"); +MODULE_DESCRIPTION("TI AFE4403 Heart Rate Monitor and Pulse Oximeter AFE"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c index 5096a4643784..45266404f7e3 100644 --- a/drivers/iio/health/afe4404.c +++ b/drivers/iio/health/afe4404.c @@ -1,7 +1,7 @@ /* * AFE4404 Heart Rate Monitors and Low-Cost Pulse Oximeters * - * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ * Andrew F. Davis <afd@ti.com> * * This program is free software; you can redistribute it and/or modify @@ -48,118 +48,102 @@ #define AFE4404_AVG_LED2_ALED2VAL 0x3f #define AFE4404_AVG_LED1_ALED1VAL 0x40 -/* AFE4404 GAIN register fields */ -#define AFE4404_TIA_GAIN_RES_MASK GENMASK(2, 0) -#define AFE4404_TIA_GAIN_RES_SHIFT 0 -#define AFE4404_TIA_GAIN_CAP_MASK GENMASK(5, 3) -#define AFE4404_TIA_GAIN_CAP_SHIFT 3 +/* AFE4404 CONTROL2 register fields */ +#define AFE440X_CONTROL2_OSC_ENABLE BIT(9) -/* AFE4404 LEDCNTRL register fields */ -#define AFE4404_LEDCNTRL_ILED1_MASK GENMASK(5, 0) -#define AFE4404_LEDCNTRL_ILED1_SHIFT 0 -#define AFE4404_LEDCNTRL_ILED2_MASK GENMASK(11, 6) -#define AFE4404_LEDCNTRL_ILED2_SHIFT 6 -#define AFE4404_LEDCNTRL_ILED3_MASK GENMASK(17, 12) -#define AFE4404_LEDCNTRL_ILED3_SHIFT 12 +enum afe4404_fields { + /* Gains */ + F_TIA_GAIN_SEP, F_TIA_CF_SEP, + F_TIA_GAIN, TIA_CF, -/* AFE4404 CONTROL2 register fields */ -#define AFE440X_CONTROL2_ILED_2X_MASK BIT(17) -#define AFE440X_CONTROL2_ILED_2X_SHIFT 17 - -/* AFE4404 CONTROL3 register fields */ -#define AFE440X_CONTROL3_OSC_ENABLE BIT(9) - -/* AFE4404 OFFDAC register current fields */ -#define AFE4404_OFFDAC_CURR_LED1_MASK GENMASK(9, 5) -#define AFE4404_OFFDAC_CURR_LED1_SHIFT 5 -#define AFE4404_OFFDAC_CURR_LED2_MASK GENMASK(19, 15) -#define AFE4404_OFFDAC_CURR_LED2_SHIFT 15 -#define AFE4404_OFFDAC_CURR_LED3_MASK GENMASK(4, 0) -#define AFE4404_OFFDAC_CURR_LED3_SHIFT 0 -#define AFE4404_OFFDAC_CURR_ALED1_MASK GENMASK(14, 10) -#define AFE4404_OFFDAC_CURR_ALED1_SHIFT 10 -#define AFE4404_OFFDAC_CURR_ALED2_MASK GENMASK(4, 0) -#define AFE4404_OFFDAC_CURR_ALED2_SHIFT 0 - -/* AFE4404 NULL fields */ -#define NULL_MASK 0 -#define NULL_SHIFT 0 - -/* AFE4404 TIA_GAIN_CAP values */ -#define AFE4404_TIA_GAIN_CAP_5_P 0x0 -#define AFE4404_TIA_GAIN_CAP_2_5_P 0x1 -#define AFE4404_TIA_GAIN_CAP_10_P 0x2 -#define AFE4404_TIA_GAIN_CAP_7_5_P 0x3 -#define AFE4404_TIA_GAIN_CAP_20_P 0x4 -#define AFE4404_TIA_GAIN_CAP_17_5_P 0x5 -#define AFE4404_TIA_GAIN_CAP_25_P 0x6 -#define AFE4404_TIA_GAIN_CAP_22_5_P 0x7 - -/* AFE4404 TIA_GAIN_RES values */ -#define AFE4404_TIA_GAIN_RES_500_K 0x0 -#define AFE4404_TIA_GAIN_RES_250_K 0x1 -#define AFE4404_TIA_GAIN_RES_100_K 0x2 -#define AFE4404_TIA_GAIN_RES_50_K 0x3 -#define AFE4404_TIA_GAIN_RES_25_K 0x4 -#define AFE4404_TIA_GAIN_RES_10_K 0x5 -#define AFE4404_TIA_GAIN_RES_1_M 0x6 -#define AFE4404_TIA_GAIN_RES_2_M 0x7 + /* LED Current */ + F_ILED1, F_ILED2, F_ILED3, + + /* Offset DAC */ + F_OFFDAC_AMB2, F_OFFDAC_LED1, F_OFFDAC_AMB1, F_OFFDAC_LED2, + + /* sentinel */ + F_MAX_FIELDS +}; + +static const struct reg_field afe4404_reg_fields[] = { + /* Gains */ + [F_TIA_GAIN_SEP] = REG_FIELD(AFE4404_TIA_GAIN_SEP, 0, 2), + [F_TIA_CF_SEP] = REG_FIELD(AFE4404_TIA_GAIN_SEP, 3, 5), + [F_TIA_GAIN] = REG_FIELD(AFE4404_TIA_GAIN, 0, 2), + [TIA_CF] = REG_FIELD(AFE4404_TIA_GAIN, 3, 5), + /* LED Current */ + [F_ILED1] = REG_FIELD(AFE440X_LEDCNTRL, 0, 5), + [F_ILED2] = REG_FIELD(AFE440X_LEDCNTRL, 6, 11), + [F_ILED3] = REG_FIELD(AFE440X_LEDCNTRL, 12, 17), + /* Offset DAC */ + [F_OFFDAC_AMB2] = REG_FIELD(AFE4404_OFFDAC, 0, 4), + [F_OFFDAC_LED1] = REG_FIELD(AFE4404_OFFDAC, 5, 9), + [F_OFFDAC_AMB1] = REG_FIELD(AFE4404_OFFDAC, 10, 14), + [F_OFFDAC_LED2] = REG_FIELD(AFE4404_OFFDAC, 15, 19), +}; /** - * struct afe4404_data - * @dev - Device structure - * @regmap - Register map of the device - * @regulator - Pointer to the regulator for the IC - * @trig - IIO trigger for this device - * @irq - ADC_RDY line interrupt number + * struct afe4404_data - AFE4404 device instance data + * @dev: Device structure + * @regmap: Register map of the device + * @fields: Register fields of the device + * @regulator: Pointer to the regulator for the IC + * @trig: IIO trigger for this device + * @irq: ADC_RDY line interrupt number */ struct afe4404_data { struct device *dev; struct regmap *regmap; + struct regmap_field *fields[F_MAX_FIELDS]; struct regulator *regulator; struct iio_trigger *trig; int irq; }; enum afe4404_chan_id { + LED2 = 1, + ALED2, LED1, ALED1, - LED2, - ALED2, - LED3, - LED1_ALED1, LED2_ALED2, - ILED1, - ILED2, - ILED3, + LED1_ALED1, +}; + +static const unsigned int afe4404_channel_values[] = { + [LED2] = AFE440X_LED2VAL, + [ALED2] = AFE440X_ALED2VAL, + [LED1] = AFE440X_LED1VAL, + [ALED1] = AFE440X_ALED1VAL, + [LED2_ALED2] = AFE440X_LED2_ALED2VAL, + [LED1_ALED1] = AFE440X_LED1_ALED1VAL, }; -static const struct afe440x_reg_info afe4404_reg_info[] = { - [LED1] = AFE440X_REG_INFO(AFE440X_LED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED1), - [ALED1] = AFE440X_REG_INFO(AFE440X_ALED1VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED1), - [LED2] = AFE440X_REG_INFO(AFE440X_LED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_LED2), - [ALED2] = AFE440X_REG_INFO(AFE440X_ALED2VAL, AFE4404_OFFDAC, AFE4404_OFFDAC_CURR_ALED2), - [LED3] = AFE440X_REG_INFO(AFE440X_ALED2VAL, 0, NULL), - [LED1_ALED1] = AFE440X_REG_INFO(AFE440X_LED1_ALED1VAL, 0, NULL), - [LED2_ALED2] = AFE440X_REG_INFO(AFE440X_LED2_ALED2VAL, 0, NULL), - [ILED1] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED1), - [ILED2] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED2), - [ILED3] = AFE440X_REG_INFO(AFE440X_LEDCNTRL, 0, AFE4404_LEDCNTRL_ILED3), +static const unsigned int afe4404_channel_leds[] = { + [LED2] = F_ILED2, + [ALED2] = F_ILED3, + [LED1] = F_ILED1, +}; + +static const unsigned int afe4404_channel_offdacs[] = { + [LED2] = F_OFFDAC_LED2, + [ALED2] = F_OFFDAC_AMB2, + [LED1] = F_OFFDAC_LED1, + [ALED1] = F_OFFDAC_AMB1, }; static const struct iio_chan_spec afe4404_channels[] = { /* ADC values */ - AFE440X_INTENSITY_CHAN(LED1, "led1", BIT(IIO_CHAN_INFO_OFFSET)), - AFE440X_INTENSITY_CHAN(ALED1, "led1_ambient", BIT(IIO_CHAN_INFO_OFFSET)), - AFE440X_INTENSITY_CHAN(LED2, "led2", BIT(IIO_CHAN_INFO_OFFSET)), - AFE440X_INTENSITY_CHAN(ALED2, "led2_ambient", BIT(IIO_CHAN_INFO_OFFSET)), - AFE440X_INTENSITY_CHAN(LED3, "led3", BIT(IIO_CHAN_INFO_OFFSET)), - AFE440X_INTENSITY_CHAN(LED1_ALED1, "led1-led1_ambient", 0), - AFE440X_INTENSITY_CHAN(LED2_ALED2, "led2-led2_ambient", 0), + AFE440X_INTENSITY_CHAN(LED2, BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(ALED2, BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED1, BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(ALED1, BIT(IIO_CHAN_INFO_OFFSET)), + AFE440X_INTENSITY_CHAN(LED2_ALED2, 0), + AFE440X_INTENSITY_CHAN(LED1_ALED1, 0), /* LED current */ - AFE440X_CURRENT_CHAN(ILED1, "led1"), - AFE440X_CURRENT_CHAN(ILED2, "led2"), - AFE440X_CURRENT_CHAN(ILED3, "led3"), + AFE440X_CURRENT_CHAN(LED2), + AFE440X_CURRENT_CHAN(ALED2), + AFE440X_CURRENT_CHAN(LED1), }; static const struct afe440x_val_table afe4404_res_table[] = { @@ -172,7 +156,7 @@ static const struct afe440x_val_table afe4404_res_table[] = { { .integer = 1000000, .fract = 0 }, { .integer = 2000000, .fract = 0 }, }; -AFE440X_TABLE_ATTR(tia_resistance_available, afe4404_res_table); +AFE440X_TABLE_ATTR(in_intensity_resistance_available, afe4404_res_table); static const struct afe440x_val_table afe4404_cap_table[] = { { .integer = 0, .fract = 5000 }, @@ -184,7 +168,7 @@ static const struct afe440x_val_table afe4404_cap_table[] = { { .integer = 0, .fract = 25000 }, { .integer = 0, .fract = 22500 }, }; -AFE440X_TABLE_ATTR(tia_capacitance_available, afe4404_cap_table); +AFE440X_TABLE_ATTR(in_intensity_capacitance_available, afe4404_cap_table); static ssize_t afe440x_show_register(struct device *dev, struct device_attribute *attr, @@ -193,38 +177,21 @@ static ssize_t afe440x_show_register(struct device *dev, struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct afe4404_data *afe = iio_priv(indio_dev); struct afe440x_attr *afe440x_attr = to_afe440x_attr(attr); - unsigned int reg_val, type; + unsigned int reg_val; int vals[2]; - int ret, val_len; + int ret; - ret = regmap_read(afe->regmap, afe440x_attr->reg, ®_val); + ret = regmap_field_read(afe->fields[afe440x_attr->field], ®_val); if (ret) return ret; - reg_val &= afe440x_attr->mask; - reg_val >>= afe440x_attr->shift; - - switch (afe440x_attr->type) { - case SIMPLE: - type = IIO_VAL_INT; - val_len = 1; - vals[0] = reg_val; - break; - case RESISTANCE: - case CAPACITANCE: - type = IIO_VAL_INT_PLUS_MICRO; - val_len = 2; - if (reg_val < afe440x_attr->table_size) { - vals[0] = afe440x_attr->val_table[reg_val].integer; - vals[1] = afe440x_attr->val_table[reg_val].fract; - break; - } - return -EINVAL; - default: + if (reg_val >= afe440x_attr->table_size) return -EINVAL; - } - return iio_format_value(buf, type, val_len, vals); + vals[0] = afe440x_attr->val_table[reg_val].integer; + vals[1] = afe440x_attr->val_table[reg_val].fract; + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals); } static ssize_t afe440x_store_register(struct device *dev, @@ -240,48 +207,43 @@ static ssize_t afe440x_store_register(struct device *dev, if (ret) return ret; - switch (afe440x_attr->type) { - case SIMPLE: - val = integer; - break; - case RESISTANCE: - case CAPACITANCE: - for (val = 0; val < afe440x_attr->table_size; val++) - if (afe440x_attr->val_table[val].integer == integer && - afe440x_attr->val_table[val].fract == fract) - break; - if (val == afe440x_attr->table_size) - return -EINVAL; - break; - default: + for (val = 0; val < afe440x_attr->table_size; val++) + if (afe440x_attr->val_table[val].integer == integer && + afe440x_attr->val_table[val].fract == fract) + break; + if (val == afe440x_attr->table_size) return -EINVAL; - } - ret = regmap_update_bits(afe->regmap, afe440x_attr->reg, - afe440x_attr->mask, - (val << afe440x_attr->shift)); + ret = regmap_field_write(afe->fields[afe440x_attr->field], val); if (ret) return ret; return count; } -static AFE440X_ATTR(tia_separate_en, AFE4404_TIA_GAIN_SEP, AFE440X_TIAGAIN_ENSEPGAIN, SIMPLE, NULL, 0); +static AFE440X_ATTR(in_intensity1_resistance, F_TIA_GAIN_SEP, afe4404_res_table); +static AFE440X_ATTR(in_intensity1_capacitance, F_TIA_CF_SEP, afe4404_cap_table); + +static AFE440X_ATTR(in_intensity2_resistance, F_TIA_GAIN_SEP, afe4404_res_table); +static AFE440X_ATTR(in_intensity2_capacitance, F_TIA_CF_SEP, afe4404_cap_table); -static AFE440X_ATTR(tia_resistance1, AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_RES, RESISTANCE, afe4404_res_table, ARRAY_SIZE(afe4404_res_table)); -static AFE440X_ATTR(tia_capacitance1, AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_CAP, CAPACITANCE, afe4404_cap_table, ARRAY_SIZE(afe4404_cap_table)); +static AFE440X_ATTR(in_intensity3_resistance, F_TIA_GAIN, afe4404_res_table); +static AFE440X_ATTR(in_intensity3_capacitance, TIA_CF, afe4404_cap_table); -static AFE440X_ATTR(tia_resistance2, AFE4404_TIA_GAIN_SEP, AFE4404_TIA_GAIN_RES, RESISTANCE, afe4404_res_table, ARRAY_SIZE(afe4404_res_table)); -static AFE440X_ATTR(tia_capacitance2, AFE4404_TIA_GAIN_SEP, AFE4404_TIA_GAIN_CAP, CAPACITANCE, afe4404_cap_table, ARRAY_SIZE(afe4404_cap_table)); +static AFE440X_ATTR(in_intensity4_resistance, F_TIA_GAIN, afe4404_res_table); +static AFE440X_ATTR(in_intensity4_capacitance, TIA_CF, afe4404_cap_table); static struct attribute *afe440x_attributes[] = { - &afe440x_attr_tia_separate_en.dev_attr.attr, - &afe440x_attr_tia_resistance1.dev_attr.attr, - &afe440x_attr_tia_capacitance1.dev_attr.attr, - &afe440x_attr_tia_resistance2.dev_attr.attr, - &afe440x_attr_tia_capacitance2.dev_attr.attr, - &dev_attr_tia_resistance_available.attr, - &dev_attr_tia_capacitance_available.attr, + &dev_attr_in_intensity_resistance_available.attr, + &dev_attr_in_intensity_capacitance_available.attr, + &afe440x_attr_in_intensity1_resistance.dev_attr.attr, + &afe440x_attr_in_intensity1_capacitance.dev_attr.attr, + &afe440x_attr_in_intensity2_resistance.dev_attr.attr, + &afe440x_attr_in_intensity2_capacitance.dev_attr.attr, + &afe440x_attr_in_intensity3_resistance.dev_attr.attr, + &afe440x_attr_in_intensity3_capacitance.dev_attr.attr, + &afe440x_attr_in_intensity4_resistance.dev_attr.attr, + &afe440x_attr_in_intensity4_capacitance.dev_attr.attr, NULL }; @@ -294,35 +256,32 @@ static int afe4404_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct afe4404_data *afe = iio_priv(indio_dev); - const struct afe440x_reg_info reg_info = afe4404_reg_info[chan->address]; + unsigned int value_reg = afe4404_channel_values[chan->address]; + unsigned int led_field = afe4404_channel_leds[chan->address]; + unsigned int offdac_field = afe4404_channel_offdacs[chan->address]; int ret; switch (chan->type) { case IIO_INTENSITY: switch (mask) { case IIO_CHAN_INFO_RAW: - ret = regmap_read(afe->regmap, reg_info.reg, val); + ret = regmap_read(afe->regmap, value_reg, val); if (ret) return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - ret = regmap_read(afe->regmap, reg_info.offreg, - val); + ret = regmap_field_read(afe->fields[offdac_field], val); if (ret) return ret; - *val &= reg_info.mask; - *val >>= reg_info.shift; return IIO_VAL_INT; } break; case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: - ret = regmap_read(afe->regmap, reg_info.reg, val); + ret = regmap_field_read(afe->fields[led_field], val); if (ret) return ret; - *val &= reg_info.mask; - *val >>= reg_info.shift; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = 0; @@ -342,25 +301,20 @@ static int afe4404_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct afe4404_data *afe = iio_priv(indio_dev); - const struct afe440x_reg_info reg_info = afe4404_reg_info[chan->address]; + unsigned int led_field = afe4404_channel_leds[chan->address]; + unsigned int offdac_field = afe4404_channel_offdacs[chan->address]; switch (chan->type) { case IIO_INTENSITY: switch (mask) { case IIO_CHAN_INFO_OFFSET: - return regmap_update_bits(afe->regmap, - reg_info.offreg, - reg_info.mask, - (val << reg_info.shift)); + return regmap_field_write(afe->fields[offdac_field], val); } break; case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: - return regmap_update_bits(afe->regmap, - reg_info.reg, - reg_info.mask, - (val << reg_info.shift)); + return regmap_field_write(afe->fields[led_field], val); } break; default: @@ -387,7 +341,7 @@ static irqreturn_t afe4404_trigger_handler(int irq, void *private) for_each_set_bit(bit, indio_dev->active_scan_mask, indio_dev->masklength) { - ret = regmap_read(afe->regmap, afe4404_reg_info[bit].reg, + ret = regmap_read(afe->regmap, afe4404_channel_values[bit], &buffer[i++]); if (ret) goto err; @@ -443,11 +397,8 @@ static const struct iio_trigger_ops afe4404_trigger_ops = { static const struct reg_sequence afe4404_reg_sequences[] = { AFE4404_TIMING_PAIRS, { AFE440X_CONTROL1, AFE440X_CONTROL1_TIMEREN }, - { AFE4404_TIA_GAIN, AFE4404_TIA_GAIN_RES_50_K }, - { AFE440X_LEDCNTRL, (0xf << AFE4404_LEDCNTRL_ILED1_SHIFT) | - (0x3 << AFE4404_LEDCNTRL_ILED2_SHIFT) | - (0x3 << AFE4404_LEDCNTRL_ILED3_SHIFT) }, - { AFE440X_CONTROL2, AFE440X_CONTROL3_OSC_ENABLE }, + { AFE4404_TIA_GAIN_SEP, AFE440X_TIAGAIN_ENSEPGAIN }, + { AFE440X_CONTROL2, AFE440X_CONTROL2_OSC_ENABLE }, }; static const struct regmap_range afe4404_yes_ranges[] = { @@ -469,13 +420,11 @@ static const struct regmap_config afe4404_regmap_config = { .volatile_table = &afe4404_volatile_table, }; -#ifdef CONFIG_OF static const struct of_device_id afe4404_of_match[] = { { .compatible = "ti,afe4404", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, afe4404_of_match); -#endif static int __maybe_unused afe4404_suspend(struct device *dev) { @@ -525,7 +474,7 @@ static int afe4404_probe(struct i2c_client *client, { struct iio_dev *indio_dev; struct afe4404_data *afe; - int ret; + int i, ret; indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*afe)); if (!indio_dev) @@ -543,6 +492,15 @@ static int afe4404_probe(struct i2c_client *client, return PTR_ERR(afe->regmap); } + for (i = 0; i < F_MAX_FIELDS; i++) { + afe->fields[i] = devm_regmap_field_alloc(afe->dev, afe->regmap, + afe4404_reg_fields[i]); + if (IS_ERR(afe->fields[i])) { + dev_err(afe->dev, "Unable to allocate regmap fields\n"); + return PTR_ERR(afe->fields[i]); + } + } + afe->regulator = devm_regulator_get(afe->dev, "tx_sup"); if (IS_ERR(afe->regulator)) { dev_err(afe->dev, "Unable to get regulator\n"); @@ -665,7 +623,7 @@ MODULE_DEVICE_TABLE(i2c, afe4404_ids); static struct i2c_driver afe4404_i2c_driver = { .driver = { .name = AFE4404_DRIVER_NAME, - .of_match_table = of_match_ptr(afe4404_of_match), + .of_match_table = afe4404_of_match, .pm = &afe4404_pm_ops, }, .probe = afe4404_probe, @@ -675,5 +633,5 @@ static struct i2c_driver afe4404_i2c_driver = { module_i2c_driver(afe4404_i2c_driver); MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); -MODULE_DESCRIPTION("TI AFE4404 Heart Rate and Pulse Oximeter"); +MODULE_DESCRIPTION("TI AFE4404 Heart Rate Monitor and Pulse Oximeter AFE"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/health/afe440x.h b/drivers/iio/health/afe440x.h index c671ab78a23a..1a0f247043ca 100644 --- a/drivers/iio/health/afe440x.h +++ b/drivers/iio/health/afe440x.h @@ -71,8 +71,7 @@ #define AFE440X_CONTROL1_TIMEREN BIT(8) /* TIAGAIN register fields */ -#define AFE440X_TIAGAIN_ENSEPGAIN_MASK BIT(15) -#define AFE440X_TIAGAIN_ENSEPGAIN_SHIFT 15 +#define AFE440X_TIAGAIN_ENSEPGAIN BIT(15) /* CONTROL2 register fields */ #define AFE440X_CONTROL2_PDN_AFE BIT(0) @@ -89,22 +88,7 @@ #define AFE440X_CONTROL0_WRITE 0x0 #define AFE440X_CONTROL0_READ 0x1 -struct afe440x_reg_info { - unsigned int reg; - unsigned int offreg; - unsigned int shift; - unsigned int mask; -}; - -#define AFE440X_REG_INFO(_reg, _offreg, _sm) \ - { \ - .reg = _reg, \ - .offreg = _offreg, \ - .shift = _sm ## _SHIFT, \ - .mask = _sm ## _MASK, \ - } - -#define AFE440X_INTENSITY_CHAN(_index, _name, _mask) \ +#define AFE440X_INTENSITY_CHAN(_index, _mask) \ { \ .type = IIO_INTENSITY, \ .channel = _index, \ @@ -116,29 +100,23 @@ struct afe440x_reg_info { .storagebits = 32, \ .endianness = IIO_CPU, \ }, \ - .extend_name = _name, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ _mask, \ + .indexed = true, \ } -#define AFE440X_CURRENT_CHAN(_index, _name) \ +#define AFE440X_CURRENT_CHAN(_index) \ { \ .type = IIO_CURRENT, \ .channel = _index, \ .address = _index, \ - .scan_index = _index, \ - .extend_name = _name, \ + .scan_index = -1, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ BIT(IIO_CHAN_INFO_SCALE), \ + .indexed = true, \ .output = true, \ } -enum afe440x_reg_type { - SIMPLE, - RESISTANCE, - CAPACITANCE, -}; - struct afe440x_val_table { int integer; int fract; @@ -164,10 +142,7 @@ static DEVICE_ATTR_RO(_name) struct afe440x_attr { struct device_attribute dev_attr; - unsigned int reg; - unsigned int shift; - unsigned int mask; - enum afe440x_reg_type type; + unsigned int field; const struct afe440x_val_table *val_table; unsigned int table_size; }; @@ -175,17 +150,14 @@ struct afe440x_attr { #define to_afe440x_attr(_dev_attr) \ container_of(_dev_attr, struct afe440x_attr, dev_attr) -#define AFE440X_ATTR(_name, _reg, _field, _type, _table, _size) \ +#define AFE440X_ATTR(_name, _field, _table) \ struct afe440x_attr afe440x_attr_##_name = { \ .dev_attr = __ATTR(_name, (S_IRUGO | S_IWUSR), \ afe440x_show_register, \ afe440x_store_register), \ - .reg = _reg, \ - .shift = _field ## _SHIFT, \ - .mask = _field ## _MASK, \ - .type = _type, \ + .field = _field, \ .val_table = _table, \ - .table_size = _size, \ + .table_size = ARRAY_SIZE(_table), \ } #endif /* _AFE440X_H */ diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c index 11535911a5c6..3e200f69e886 100644 --- a/drivers/iio/humidity/am2315.c +++ b/drivers/iio/humidity/am2315.c @@ -276,6 +276,7 @@ static const struct i2c_device_id am2315_i2c_id[] = { {"am2315", 0}, {} }; +MODULE_DEVICE_TABLE(i2c, am2315_i2c_id); static const struct acpi_device_id am2315_acpi_id[] = { {"AOS2315", 0}, diff --git a/drivers/iio/humidity/htu21.c b/drivers/iio/humidity/htu21.c index 11cbc38b450f..0fbbd8c40894 100644 --- a/drivers/iio/humidity/htu21.c +++ b/drivers/iio/humidity/htu21.c @@ -236,6 +236,7 @@ static const struct i2c_device_id htu21_id[] = { {"ms8607-humidity", MS8607}, {} }; +MODULE_DEVICE_TABLE(i2c, htu21_id); static struct i2c_driver htu21_driver = { .probe = htu21_probe, diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index b8a290ec984e..97928d558a15 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -20,6 +20,7 @@ #include <linux/iio/triggered_buffer.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> #include "bmi160.h" @@ -466,10 +467,36 @@ static int bmi160_write_raw(struct iio_dev *indio_dev, return 0; } +static +IIO_CONST_ATTR(in_accel_sampling_frequency_available, + "0.78125 1.5625 3.125 6.25 12.5 25 50 100 200 400 800 1600"); +static +IIO_CONST_ATTR(in_anglvel_sampling_frequency_available, + "25 50 100 200 400 800 1600 3200"); +static +IIO_CONST_ATTR(in_accel_scale_available, + "0.000598 0.001197 0.002394 0.004788"); +static +IIO_CONST_ATTR(in_anglvel_scale_available, + "0.001065 0.000532 0.000266 0.000133 0.000066"); + +static struct attribute *bmi160_attrs[] = { + &iio_const_attr_in_accel_sampling_frequency_available.dev_attr.attr, + &iio_const_attr_in_anglvel_sampling_frequency_available.dev_attr.attr, + &iio_const_attr_in_accel_scale_available.dev_attr.attr, + &iio_const_attr_in_anglvel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bmi160_attrs_group = { + .attrs = bmi160_attrs, +}; + static const struct iio_info bmi160_info = { .driver_module = THIS_MODULE, .read_raw = bmi160_read_raw, .write_raw = bmi160_write_raw, + .attrs = &bmi160_attrs_group, }; static const char *bmi160_match_acpi_device(struct device *dev) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index e6319a9346b2..2a85bd888619 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -80,6 +80,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_RESISTANCE] = "resistance", [IIO_PH] = "ph", [IIO_UVINDEX] = "uvindex", + [IIO_ELECTRICALCONDUCTIVITY] = "electricalconductivity", }; static const char * const iio_modifier_names[] = { diff --git a/drivers/iio/industrialio-sw-device.c b/drivers/iio/industrialio-sw-device.c new file mode 100644 index 000000000000..81b49cfca452 --- /dev/null +++ b/drivers/iio/industrialio-sw-device.c @@ -0,0 +1,182 @@ +/* + * The Industrial I/O core, software IIO devices functions + * + * Copyright (c) 2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kmod.h> +#include <linux/list.h> +#include <linux/slab.h> + +#include <linux/iio/sw_device.h> +#include <linux/iio/configfs.h> +#include <linux/configfs.h> + +static struct config_group *iio_devices_group; +static struct config_item_type iio_device_type_group_type; + +static struct config_item_type iio_devices_group_type = { + .ct_owner = THIS_MODULE, +}; + +static LIST_HEAD(iio_device_types_list); +static DEFINE_MUTEX(iio_device_types_lock); + +static +struct iio_sw_device_type *__iio_find_sw_device_type(const char *name, + unsigned len) +{ + struct iio_sw_device_type *d = NULL, *iter; + + list_for_each_entry(iter, &iio_device_types_list, list) + if (!strcmp(iter->name, name)) { + d = iter; + break; + } + + return d; +} + +int iio_register_sw_device_type(struct iio_sw_device_type *d) +{ + struct iio_sw_device_type *iter; + int ret = 0; + + mutex_lock(&iio_device_types_lock); + iter = __iio_find_sw_device_type(d->name, strlen(d->name)); + if (iter) + ret = -EBUSY; + else + list_add_tail(&d->list, &iio_device_types_list); + mutex_unlock(&iio_device_types_lock); + + if (ret) + return ret; + + d->group = configfs_register_default_group(iio_devices_group, d->name, + &iio_device_type_group_type); + if (IS_ERR(d->group)) + ret = PTR_ERR(d->group); + + return ret; +} +EXPORT_SYMBOL(iio_register_sw_device_type); + +void iio_unregister_sw_device_type(struct iio_sw_device_type *dt) +{ + struct iio_sw_device_type *iter; + + mutex_lock(&iio_device_types_lock); + iter = __iio_find_sw_device_type(dt->name, strlen(dt->name)); + if (iter) + list_del(&dt->list); + mutex_unlock(&iio_device_types_lock); + + configfs_unregister_default_group(dt->group); +} +EXPORT_SYMBOL(iio_unregister_sw_device_type); + +static +struct iio_sw_device_type *iio_get_sw_device_type(const char *name) +{ + struct iio_sw_device_type *dt; + + mutex_lock(&iio_device_types_lock); + dt = __iio_find_sw_device_type(name, strlen(name)); + if (dt && !try_module_get(dt->owner)) + dt = NULL; + mutex_unlock(&iio_device_types_lock); + + return dt; +} + +struct iio_sw_device *iio_sw_device_create(const char *type, const char *name) +{ + struct iio_sw_device *d; + struct iio_sw_device_type *dt; + + dt = iio_get_sw_device_type(type); + if (!dt) { + pr_err("Invalid device type: %s\n", type); + return ERR_PTR(-EINVAL); + } + d = dt->ops->probe(name); + if (IS_ERR(d)) + goto out_module_put; + + d->device_type = dt; + + return d; +out_module_put: + module_put(dt->owner); + return d; +} +EXPORT_SYMBOL(iio_sw_device_create); + +void iio_sw_device_destroy(struct iio_sw_device *d) +{ + struct iio_sw_device_type *dt = d->device_type; + + dt->ops->remove(d); + module_put(dt->owner); +} +EXPORT_SYMBOL(iio_sw_device_destroy); + +static struct config_group *device_make_group(struct config_group *group, + const char *name) +{ + struct iio_sw_device *d; + + d = iio_sw_device_create(group->cg_item.ci_name, name); + if (IS_ERR(d)) + return ERR_CAST(d); + + config_item_set_name(&d->group.cg_item, "%s", name); + + return &d->group; +} + +static void device_drop_group(struct config_group *group, + struct config_item *item) +{ + struct iio_sw_device *d = to_iio_sw_device(item); + + iio_sw_device_destroy(d); + config_item_put(item); +} + +static struct configfs_group_operations device_ops = { + .make_group = &device_make_group, + .drop_item = &device_drop_group, +}; + +static struct config_item_type iio_device_type_group_type = { + .ct_group_ops = &device_ops, + .ct_owner = THIS_MODULE, +}; + +static int __init iio_sw_device_init(void) +{ + iio_devices_group = + configfs_register_default_group(&iio_configfs_subsys.su_group, + "devices", + &iio_devices_group_type); + return PTR_ERR_OR_ZERO(iio_devices_group); +} +module_init(iio_sw_device_init); + +static void __exit iio_sw_device_exit(void) +{ + configfs_unregister_default_group(iio_devices_group); +} +module_exit(iio_sw_device_exit); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>"); +MODULE_DESCRIPTION("Industrial I/O software devices support"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c index 0c52dfe64977..98457f044aa5 100644 --- a/drivers/iio/industrialio-trigger.c +++ b/drivers/iio/industrialio-trigger.c @@ -64,10 +64,16 @@ static struct attribute *iio_trig_dev_attrs[] = { }; ATTRIBUTE_GROUPS(iio_trig_dev); +static struct iio_trigger *__iio_trigger_find_by_name(const char *name); + int iio_trigger_register(struct iio_trigger *trig_info) { int ret; + /* trig_info->ops is required for the module member */ + if (!trig_info->ops) + return -EINVAL; + trig_info->id = ida_simple_get(&iio_trigger_ida, 0, 0, GFP_KERNEL); if (trig_info->id < 0) return trig_info->id; @@ -82,11 +88,19 @@ int iio_trigger_register(struct iio_trigger *trig_info) /* Add to list of available triggers held by the IIO core */ mutex_lock(&iio_trigger_list_lock); + if (__iio_trigger_find_by_name(trig_info->name)) { + pr_err("Duplicate trigger name '%s'\n", trig_info->name); + ret = -EEXIST; + goto error_device_del; + } list_add_tail(&trig_info->list, &iio_trigger_list); mutex_unlock(&iio_trigger_list_lock); return 0; +error_device_del: + mutex_unlock(&iio_trigger_list_lock); + device_del(&trig_info->dev); error_unregister_id: ida_simple_remove(&iio_trigger_ida, trig_info->id); return ret; @@ -105,6 +119,18 @@ void iio_trigger_unregister(struct iio_trigger *trig_info) } EXPORT_SYMBOL(iio_trigger_unregister); +/* Search for trigger by name, assuming iio_trigger_list_lock held */ +static struct iio_trigger *__iio_trigger_find_by_name(const char *name) +{ + struct iio_trigger *iter; + + list_for_each_entry(iter, &iio_trigger_list, list) + if (!strcmp(iter->name, name)) + return iter; + + return NULL; +} + static struct iio_trigger *iio_trigger_find_by_name(const char *name, size_t len) { @@ -164,8 +190,7 @@ EXPORT_SYMBOL(iio_trigger_poll_chained); void iio_trigger_notify_done(struct iio_trigger *trig) { - if (atomic_dec_and_test(&trig->use_count) && trig->ops && - trig->ops->try_reenable) + if (atomic_dec_and_test(&trig->use_count) && trig->ops->try_reenable) if (trig->ops->try_reenable(trig)) /* Missed an interrupt so launch new poll now */ iio_trigger_poll(trig); @@ -224,7 +249,7 @@ static int iio_trigger_attach_poll_func(struct iio_trigger *trig, goto out_put_irq; /* Enable trigger in driver */ - if (trig->ops && trig->ops->set_trigger_state && notinuse) { + if (trig->ops->set_trigger_state && notinuse) { ret = trig->ops->set_trigger_state(trig, true); if (ret < 0) goto out_free_irq; @@ -249,7 +274,7 @@ static int iio_trigger_detach_poll_func(struct iio_trigger *trig, = (bitmap_weight(trig->pool, CONFIG_IIO_CONSUMERS_PER_TRIGGER) == 1); - if (trig->ops && trig->ops->set_trigger_state && no_other_users) { + if (trig->ops->set_trigger_state && no_other_users) { ret = trig->ops->set_trigger_state(trig, false); if (ret) return ret; @@ -371,7 +396,7 @@ static ssize_t iio_trigger_write_current(struct device *dev, return ret; } - if (trig && trig->ops && trig->ops->validate_device) { + if (trig && trig->ops->validate_device) { ret = trig->ops->validate_device(trig, indio_dev); if (ret) return ret; diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c index 6d41086f7c64..af73af3586a9 100644 --- a/drivers/iio/light/gp2ap020a00f.c +++ b/drivers/iio/light/gp2ap020a00f.c @@ -1287,22 +1287,14 @@ static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev, struct gp2ap020a00f_data *data = iio_priv(indio_dev); int err = -EINVAL; - mutex_lock(&data->lock); - - switch (mask) { - case IIO_CHAN_INFO_RAW: - if (iio_buffer_enabled(indio_dev)) { - err = -EBUSY; - goto error_unlock; - } + if (mask == IIO_CHAN_INFO_RAW) { + err = iio_device_claim_direct_mode(indio_dev); + if (err) + return err; err = gp2ap020a00f_read_channel(data, chan, val); - break; + iio_device_release_direct_mode(indio_dev); } - -error_unlock: - mutex_unlock(&data->lock); - return err < 0 ? err : IIO_VAL_INT; } diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c index e2945a20e5f6..a6b9d66233d5 100644 --- a/drivers/iio/light/isl29125.c +++ b/drivers/iio/light/isl29125.c @@ -50,7 +50,6 @@ struct isl29125_data { struct i2c_client *client; - struct mutex lock; u8 conf1; u16 buffer[8]; /* 3x 16-bit, padding, 8 bytes timestamp */ }; @@ -128,11 +127,11 @@ static int isl29125_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - if (iio_buffer_enabled(indio_dev)) - return -EBUSY; - mutex_lock(&data->lock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; ret = isl29125_read_data(data, chan->scan_index); - mutex_unlock(&data->lock); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; *val = ret; @@ -259,7 +258,6 @@ static int isl29125_probe(struct i2c_client *client, data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; - mutex_init(&data->lock); indio_dev->dev.parent = &client->dev; indio_dev->info = &isl29125_info; diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c index 99a62816c3b4..e8a8931b4f50 100644 --- a/drivers/iio/light/jsa1212.c +++ b/drivers/iio/light/jsa1212.c @@ -325,9 +325,6 @@ static int jsa1212_probe(struct i2c_client *client, struct regmap *regmap; int ret; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return -EOPNOTSUPP; - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c index f90f8c5919fe..8a15fb541dc3 100644 --- a/drivers/iio/light/tcs3414.c +++ b/drivers/iio/light/tcs3414.c @@ -53,7 +53,6 @@ struct tcs3414_data { struct i2c_client *client; - struct mutex lock; u8 control; u8 gain; u8 timing; @@ -134,16 +133,16 @@ static int tcs3414_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - if (iio_buffer_enabled(indio_dev)) - return -EBUSY; - mutex_lock(&data->lock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; ret = tcs3414_req_data(data); if (ret < 0) { - mutex_unlock(&data->lock); + iio_device_release_direct_mode(indio_dev); return ret; } ret = i2c_smbus_read_word_data(data->client, chan->address); - mutex_unlock(&data->lock); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; *val = ret; @@ -288,7 +287,6 @@ static int tcs3414_probe(struct i2c_client *client, data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; - mutex_init(&data->lock); indio_dev->dev.parent = &client->dev; indio_dev->info = &tcs3414_info; diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c index 1b530bf04c89..b29312f99077 100644 --- a/drivers/iio/light/tcs3472.c +++ b/drivers/iio/light/tcs3472.c @@ -52,7 +52,6 @@ struct tcs3472_data { struct i2c_client *client; - struct mutex lock; u8 enable; u8 control; u8 atime; @@ -117,17 +116,16 @@ static int tcs3472_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_RAW: - if (iio_buffer_enabled(indio_dev)) - return -EBUSY; - - mutex_lock(&data->lock); + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; ret = tcs3472_req_data(data); if (ret < 0) { - mutex_unlock(&data->lock); + iio_device_release_direct_mode(indio_dev); return ret; } ret = i2c_smbus_read_word_data(data->client, chan->address); - mutex_unlock(&data->lock); + iio_device_release_direct_mode(indio_dev); if (ret < 0) return ret; *val = ret; @@ -263,7 +261,6 @@ static int tcs3472_probe(struct i2c_client *client, data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev); data->client = client; - mutex_init(&data->lock); indio_dev->dev.parent = &client->dev; indio_dev->info = &tcs3472_info; diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig index 84e6559ccc65..1f842abcb4a4 100644 --- a/drivers/iio/magnetometer/Kconfig +++ b/drivers/iio/magnetometer/Kconfig @@ -44,6 +44,7 @@ config BMC150_MAGN_I2C This driver is only implementing magnetometer part, which has its own address and register map. + This driver also supports I2C Bosch BMC156 and BMM150 chips. To compile this driver as a module, choose M here: the module will be called bmc150_magn_i2c. @@ -60,6 +61,7 @@ config BMC150_MAGN_SPI This driver is only implementing magnetometer part, which has its own address and register map. + This driver also supports SPI Bosch BMC156 and BMM150 chips. To compile this driver as a module, choose M here: the module will be called bmc150_magn_spi. diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 609a2c401b5d..57d3654d7caf 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -430,8 +430,8 @@ static int ak8975_who_i_am(struct i2c_client *client, * AK8975 | DEVICE_ID | NA * AK8963 | DEVICE_ID | NA */ - ret = i2c_smbus_read_i2c_block_data(client, AK09912_REG_WIA1, - 2, wia_val); + ret = i2c_smbus_read_i2c_block_data_or_emulated( + client, AK09912_REG_WIA1, 2, wia_val); if (ret < 0) { dev_err(&client->dev, "Error reading WIA\n"); return ret; @@ -543,9 +543,9 @@ static int ak8975_setup(struct i2c_client *client) } /* Get asa data and store in the device data. */ - ret = i2c_smbus_read_i2c_block_data(client, - data->def->ctrl_regs[ASA_BASE], - 3, data->asa); + ret = i2c_smbus_read_i2c_block_data_or_emulated( + client, data->def->ctrl_regs[ASA_BASE], + 3, data->asa); if (ret < 0) { dev_err(&client->dev, "Not able to read asa data\n"); return ret; @@ -686,6 +686,7 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) struct ak8975_data *data = iio_priv(indio_dev); const struct i2c_client *client = data->client; const struct ak_def *def = data->def; + u16 buff; int ret; mutex_lock(&data->lock); @@ -694,14 +695,17 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) if (ret) goto exit; - ret = i2c_smbus_read_word_data(client, def->data_regs[index]); + ret = i2c_smbus_read_i2c_block_data_or_emulated( + client, def->data_regs[index], + sizeof(buff), (u8*)&buff); if (ret < 0) goto exit; mutex_unlock(&data->lock); - /* Clamp to valid range. */ - *val = clamp_t(s16, ret, -def->range, def->range); + /* Swap bytes and convert to valid range. */ + buff = le16_to_cpu(buff); + *val = clamp_t(s16, buff, -def->range, def->range); return IIO_VAL_INT; exit: diff --git a/drivers/iio/magnetometer/bmc150_magn_i2c.c b/drivers/iio/magnetometer/bmc150_magn_i2c.c index eddc7f0d0096..ee05722587aa 100644 --- a/drivers/iio/magnetometer/bmc150_magn_i2c.c +++ b/drivers/iio/magnetometer/bmc150_magn_i2c.c @@ -2,6 +2,7 @@ * 3-axis magnetometer driver supporting following I2C Bosch-Sensortec chips: * - BMC150 * - BMC156 + * - BMM150 * * Copyright (c) 2016, Intel Corporation. * @@ -49,6 +50,7 @@ static int bmc150_magn_i2c_remove(struct i2c_client *client) static const struct acpi_device_id bmc150_magn_acpi_match[] = { {"BMC150B", 0}, {"BMC156B", 0}, + {"BMM150B", 0}, {}, }; MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); @@ -56,6 +58,7 @@ MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); static const struct i2c_device_id bmc150_magn_i2c_id[] = { {"bmc150_magn", 0}, {"bmc156_magn", 0}, + {"bmm150_magn", 0}, {} }; MODULE_DEVICE_TABLE(i2c, bmc150_magn_i2c_id); diff --git a/drivers/iio/magnetometer/bmc150_magn_spi.c b/drivers/iio/magnetometer/bmc150_magn_spi.c index c4c738a07695..7d4152d4d01e 100644 --- a/drivers/iio/magnetometer/bmc150_magn_spi.c +++ b/drivers/iio/magnetometer/bmc150_magn_spi.c @@ -2,6 +2,7 @@ * 3-axis magnetometer driver support following SPI Bosch-Sensortec chips: * - BMC150 * - BMC156 + * - BMM150 * * Copyright (c) 2016, Intel Corporation. * @@ -41,6 +42,7 @@ static int bmc150_magn_spi_remove(struct spi_device *spi) static const struct spi_device_id bmc150_magn_spi_id[] = { {"bmc150_magn", 0}, {"bmc156_magn", 0}, + {"bmm150_magn", 0}, {} }; MODULE_DEVICE_TABLE(spi, bmc150_magn_spi_id); @@ -48,6 +50,7 @@ MODULE_DEVICE_TABLE(spi, bmc150_magn_spi_id); static const struct acpi_device_id bmc150_magn_acpi_match[] = { {"BMC150B", 0}, {"BMC156B", 0}, + {"BMM150B", 0}, {}, }; MODULE_DEVICE_TABLE(acpi, bmc150_magn_acpi_match); diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index 8250fc322c56..3e1f06b2224c 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -589,13 +589,15 @@ int st_magn_common_probe(struct iio_dev *indio_dev) indio_dev->info = &magn_info; mutex_init(&mdata->tb.buf_lock); - st_sensors_power_enable(indio_dev); + err = st_sensors_power_enable(indio_dev); + if (err) + return err; err = st_sensors_check_device_support(indio_dev, ARRAY_SIZE(st_magn_sensors_settings), st_magn_sensors_settings); if (err < 0) - return err; + goto st_magn_power_off; mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS; mdata->multiread_bit = mdata->sensor_settings->multi_read_bit; @@ -608,11 +610,11 @@ int st_magn_common_probe(struct iio_dev *indio_dev) err = st_sensors_init_sensor(indio_dev, NULL); if (err < 0) - return err; + goto st_magn_power_off; err = st_magn_allocate_ring(indio_dev); if (err < 0) - return err; + goto st_magn_power_off; if (irq > 0) { err = st_sensors_allocate_trigger(indio_dev, @@ -635,6 +637,8 @@ st_magn_device_register_error: st_sensors_deallocate_trigger(indio_dev); st_magn_probe_trigger_error: st_magn_deallocate_ring(indio_dev); +st_magn_power_off: + st_sensors_power_disable(indio_dev); return err; } diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig index 6acb23810bb4..0941c8d490a0 100644 --- a/drivers/iio/potentiometer/Kconfig +++ b/drivers/iio/potentiometer/Kconfig @@ -15,6 +15,17 @@ config DS1803 To compile this driver as a module, choose M here: the module will be called ds1803. +config MAX5487 + tristate "Maxim MAX5487/MAX5488/MAX5489 Digital Potentiometer driver" + depends on SPI + help + Say yes here to build support for the Maxim + MAX5487, MAX5488, MAX5489 digital potentiometer + chips. + + To compile this driver as a module, choose M here: the + module will be called max5487. + config MCP4131 tristate "Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer driver" depends on SPI diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile index 6007faa2fb02..8adb58f38c0b 100644 --- a/drivers/iio/potentiometer/Makefile +++ b/drivers/iio/potentiometer/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_DS1803) += ds1803.o +obj-$(CONFIG_MAX5487) += max5487.o obj-$(CONFIG_MCP4131) += mcp4131.o obj-$(CONFIG_MCP4531) += mcp4531.o obj-$(CONFIG_TPL0102) += tpl0102.o diff --git a/drivers/iio/potentiometer/max5487.c b/drivers/iio/potentiometer/max5487.c new file mode 100644 index 000000000000..6c50939a2e83 --- /dev/null +++ b/drivers/iio/potentiometer/max5487.c @@ -0,0 +1,161 @@ +/* + * max5487.c - Support for MAX5487, MAX5488, MAX5489 digital potentiometers + * + * Copyright (C) 2016 Cristina-Gabriela Moraru <cristina.moraru09@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/acpi.h> + +#include <linux/iio/sysfs.h> +#include <linux/iio/iio.h> + +#define MAX5487_WRITE_WIPER_A (0x01 << 8) +#define MAX5487_WRITE_WIPER_B (0x02 << 8) + +/* copy both wiper regs to NV regs */ +#define MAX5487_COPY_AB_TO_NV (0x23 << 8) +/* copy both NV regs to wiper regs */ +#define MAX5487_COPY_NV_TO_AB (0x33 << 8) + +#define MAX5487_MAX_POS 255 + +struct max5487_data { + struct spi_device *spi; + int kohms; +}; + +#define MAX5487_CHANNEL(ch, addr) { \ + .type = IIO_RESISTANCE, \ + .indexed = 1, \ + .output = 1, \ + .channel = ch, \ + .address = addr, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static const struct iio_chan_spec max5487_channels[] = { + MAX5487_CHANNEL(0, MAX5487_WRITE_WIPER_A), + MAX5487_CHANNEL(1, MAX5487_WRITE_WIPER_B), +}; + +static int max5487_write_cmd(struct spi_device *spi, u16 cmd) +{ + return spi_write(spi, (const void *) &cmd, sizeof(u16)); +} + +static int max5487_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max5487_data *data = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_SCALE) + return -EINVAL; + + *val = 1000 * data->kohms; + *val2 = MAX5487_MAX_POS; + + return IIO_VAL_FRACTIONAL; +} + +static int max5487_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct max5487_data *data = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if (val < 0 || val > MAX5487_MAX_POS) + return -EINVAL; + + return max5487_write_cmd(data->spi, chan->address | val); +} + +static const struct iio_info max5487_info = { + .read_raw = max5487_read_raw, + .write_raw = max5487_write_raw, + .driver_module = THIS_MODULE, +}; + +static int max5487_spi_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct max5487_data *data; + const struct spi_device_id *id = spi_get_device_id(spi); + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, indio_dev); + data = iio_priv(indio_dev); + + data->spi = spi; + data->kohms = id->driver_data; + + indio_dev->info = &max5487_info; + indio_dev->name = id->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = max5487_channels; + indio_dev->num_channels = ARRAY_SIZE(max5487_channels); + + /* restore both wiper regs from NV regs */ + ret = max5487_write_cmd(data->spi, MAX5487_COPY_NV_TO_AB); + if (ret < 0) + return ret; + + return iio_device_register(indio_dev); +} + +static int max5487_spi_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = dev_get_drvdata(&spi->dev); + + iio_device_unregister(indio_dev); + + /* save both wiper regs to NV regs */ + return max5487_write_cmd(spi, MAX5487_COPY_AB_TO_NV); +} + +static const struct spi_device_id max5487_id[] = { + { "MAX5487", 10 }, + { "MAX5488", 50 }, + { "MAX5489", 100 }, + { } +}; +MODULE_DEVICE_TABLE(spi, max5487_id); + +static const struct acpi_device_id max5487_acpi_match[] = { + { "MAX5487", 10 }, + { "MAX5488", 50 }, + { "MAX5489", 100 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, max5487_acpi_match); + +static struct spi_driver max5487_driver = { + .driver = { + .name = "max5487", + .owner = THIS_MODULE, + .acpi_match_table = ACPI_PTR(max5487_acpi_match), + }, + .id_table = max5487_id, + .probe = max5487_spi_probe, + .remove = max5487_spi_remove +}; +module_spi_driver(max5487_driver); + +MODULE_AUTHOR("Cristina-Gabriela Moraru <cristina.moraru09@gmail.com>"); +MODULE_DESCRIPTION("max5487 SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/potentiometer/tpl0102.c b/drivers/iio/potentiometer/tpl0102.c index 5c304d42d713..7b6b54531ea2 100644 --- a/drivers/iio/potentiometer/tpl0102.c +++ b/drivers/iio/potentiometer/tpl0102.c @@ -116,10 +116,6 @@ static int tpl0102_probe(struct i2c_client *client, struct tpl0102_data *data; struct iio_dev *indio_dev; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_WORD_DATA)) - return -EOPNOTSUPP; - indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index cda9f128f3a4..8d654f671b6b 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -12,7 +12,8 @@ config BMP280 select REGMAP_I2C help Say yes here to build support for Bosch Sensortec BMP180 and BMP280 - pressure and temperature sensors. + pressure and temperature sensors. Also supports the BE280 with + an additional humidty sensor channel. To compile this driver as a module, choose M here: the module will be called bmp280. @@ -130,7 +131,7 @@ config IIO_ST_PRESS select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics pressure - sensors: LPS001WP, LPS25H, LPS331AP. + sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB. This driver can also be built as a module. If so, these modules will be created: diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c index 724452d61846..dbbcd6d83e3b 100644 --- a/drivers/iio/pressure/bmp280.c +++ b/drivers/iio/pressure/bmp280.c @@ -10,6 +10,7 @@ * Datasheet: * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf + * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME280_DS001-11.pdf */ #define pr_fmt(fmt) "bmp280: " fmt @@ -23,6 +24,8 @@ #include <linux/iio/sysfs.h> /* BMP280 specific registers */ +#define BMP280_REG_HUMIDITY_LSB 0xFE +#define BMP280_REG_HUMIDITY_MSB 0xFD #define BMP280_REG_TEMP_XLSB 0xFC #define BMP280_REG_TEMP_LSB 0xFB #define BMP280_REG_TEMP_MSB 0xFA @@ -31,7 +34,17 @@ #define BMP280_REG_PRESS_MSB 0xF7 #define BMP280_REG_CONFIG 0xF5 +#define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 +#define BMP280_REG_CTRL_HUMIDITY 0xF2 + +/* Due to non linear mapping, and data sizes we can't do a bulk read */ +#define BMP280_REG_COMP_H1 0xA1 +#define BMP280_REG_COMP_H2 0xE1 +#define BMP280_REG_COMP_H3 0xE3 +#define BMP280_REG_COMP_H4 0xE4 +#define BMP280_REG_COMP_H5 0xE5 +#define BMP280_REG_COMP_H6 0xE7 #define BMP280_REG_COMP_TEMP_START 0x88 #define BMP280_COMP_TEMP_REG_COUNT 6 @@ -46,6 +59,15 @@ #define BMP280_FILTER_8X (BIT(3) | BIT(2)) #define BMP280_FILTER_16X BIT(4) +#define BMP280_OSRS_HUMIDITY_MASK (BIT(2) | BIT(1) | BIT(0)) +#define BMP280_OSRS_HUMIDITIY_X(osrs_h) ((osrs_h) << 0) +#define BMP280_OSRS_HUMIDITY_SKIP 0 +#define BMP280_OSRS_HUMIDITY_1X BMP280_OSRS_HUMIDITIY_X(1) +#define BMP280_OSRS_HUMIDITY_2X BMP280_OSRS_HUMIDITIY_X(2) +#define BMP280_OSRS_HUMIDITY_4X BMP280_OSRS_HUMIDITIY_X(3) +#define BMP280_OSRS_HUMIDITY_8X BMP280_OSRS_HUMIDITIY_X(4) +#define BMP280_OSRS_HUMIDITY_16X BMP280_OSRS_HUMIDITIY_X(5) + #define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5)) #define BMP280_OSRS_TEMP_SKIP 0 #define BMP280_OSRS_TEMP_X(osrs_t) ((osrs_t) << 5) @@ -92,6 +114,7 @@ #define BMP180_CHIP_ID 0x55 #define BMP280_CHIP_ID 0x58 +#define BME280_CHIP_ID 0x60 #define BMP280_SOFT_RESET_VAL 0xB6 struct bmp280_data { @@ -103,6 +126,7 @@ struct bmp280_data { /* log of base 2 of oversampling rate */ u8 oversampling_press; u8 oversampling_temp; + u8 oversampling_humid; /* * Carryover value from temperature conversion, used in pressure @@ -120,9 +144,13 @@ struct bmp280_chip_info { const int *oversampling_press_avail; int num_oversampling_press_avail; + const int *oversampling_humid_avail; + int num_oversampling_humid_avail; + int (*chip_config)(struct bmp280_data *); int (*read_temp)(struct bmp280_data *, int *); int (*read_press)(struct bmp280_data *, int *, int *); + int (*read_humid)(struct bmp280_data *, int *, int *); }; /* @@ -143,12 +171,18 @@ static const struct iio_chan_spec bmp280_channels[] = { .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), }, + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + }, }; static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { case BMP280_REG_CONFIG: + case BMP280_REG_CTRL_HUMIDITY: case BMP280_REG_CTRL_MEAS: case BMP280_REG_RESET: return true; @@ -160,6 +194,8 @@ static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg) static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { + case BMP280_REG_HUMIDITY_LSB: + case BMP280_REG_HUMIDITY_MSB: case BMP280_REG_TEMP_XLSB: case BMP280_REG_TEMP_LSB: case BMP280_REG_TEMP_MSB: @@ -177,7 +213,7 @@ static const struct regmap_config bmp280_regmap_config = { .reg_bits = 8, .val_bits = 8, - .max_register = BMP280_REG_TEMP_XLSB, + .max_register = BMP280_REG_HUMIDITY_LSB, .cache_type = REGCACHE_RBTREE, .writeable_reg = bmp280_is_writeable_reg, @@ -185,6 +221,70 @@ static const struct regmap_config bmp280_regmap_config = { }; /* + * Returns humidity in percent, resolution is 0.01 percent. Output value of + * "47445" represents 47445/1024 = 46.333 %RH. + * + * Taken from BME280 datasheet, Section 4.2.3, "Compensation formula". + */ + +static u32 bmp280_compensate_humidity(struct bmp280_data *data, + s32 adc_humidity) +{ + struct device *dev = &data->client->dev; + unsigned int H1, H3, tmp; + int H2, H4, H5, H6, ret, var; + + ret = regmap_read(data->regmap, BMP280_REG_COMP_H1, &H1); + if (ret < 0) { + dev_err(dev, "failed to read H1 comp value\n"); + return ret; + } + + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &tmp, 2); + if (ret < 0) { + dev_err(dev, "failed to read H2 comp value\n"); + return ret; + } + H2 = sign_extend32(le16_to_cpu(tmp), 15); + + ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &H3); + if (ret < 0) { + dev_err(dev, "failed to read H3 comp value\n"); + return ret; + } + + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &tmp, 2); + if (ret < 0) { + dev_err(dev, "failed to read H4 comp value\n"); + return ret; + } + H4 = sign_extend32(((be16_to_cpu(tmp) >> 4) & 0xff0) | + (be16_to_cpu(tmp) & 0xf), 11); + + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &tmp, 2); + if (ret < 0) { + dev_err(dev, "failed to read H5 comp value\n"); + return ret; + } + H5 = sign_extend32(((le16_to_cpu(tmp) >> 4) & 0xfff), 11); + + ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp); + if (ret < 0) { + dev_err(dev, "failed to read H6 comp value\n"); + return ret; + } + H6 = sign_extend32(tmp, 7); + + var = ((s32)data->t_fine) - 76800; + var = ((((adc_humidity << 14) - (H4 << 20) - (H5 * var)) + 16384) >> 15) + * (((((((var * H6) >> 10) * (((var * H3) >> 11) + 32768)) >> 10) + + 2097152) * H2 + 8192) >> 14); + var -= ((((var >> 15) * (var >> 15)) >> 7) * H1) >> 4; + + return var >> 12; +}; + +/* * Returns temperature in DegC, resolution is 0.01 DegC. Output value of * "5123" equals 51.23 DegC. t_fine carries fine temperature as global * value. @@ -324,6 +424,34 @@ static int bmp280_read_press(struct bmp280_data *data, return IIO_VAL_FRACTIONAL; } +static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) +{ + int ret; + __be16 tmp = 0; + s32 adc_humidity; + u32 comp_humidity; + + /* Read and compensate temperature so we get a reading of t_fine. */ + ret = bmp280_read_temp(data, NULL); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, + (u8 *) &tmp, 2); + if (ret < 0) { + dev_err(&data->client->dev, "failed to read humidity\n"); + return ret; + } + + adc_humidity = be16_to_cpu(tmp); + comp_humidity = bmp280_compensate_humidity(data, adc_humidity); + + *val = comp_humidity; + *val2 = 1024; + + return IIO_VAL_FRACTIONAL; +} + static int bmp280_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -336,6 +464,9 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { + case IIO_HUMIDITYRELATIVE: + ret = data->chip_info->read_humid(data, val, val2); + break; case IIO_PRESSURE: ret = data->chip_info->read_press(data, val, val2); break; @@ -349,6 +480,10 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, break; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: switch (chan->type) { + case IIO_HUMIDITYRELATIVE: + *val = 1 << data->oversampling_humid; + ret = IIO_VAL_INT; + break; case IIO_PRESSURE: *val = 1 << data->oversampling_press; ret = IIO_VAL_INT; @@ -372,6 +507,23 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, return ret; } +static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data, + int val) +{ + int i; + const int *avail = data->chip_info->oversampling_humid_avail; + const int n = data->chip_info->num_oversampling_humid_avail; + + for (i = 0; i < n; i++) { + if (avail[i] == val) { + data->oversampling_humid = ilog2(val); + + return data->chip_info->chip_config(data); + } + } + return -EINVAL; +} + static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data, int val) { @@ -417,6 +569,9 @@ static int bmp280_write_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_OVERSAMPLING_RATIO: mutex_lock(&data->lock); switch (chan->type) { + case IIO_HUMIDITYRELATIVE: + ret = bmp280_write_oversampling_ratio_humid(data, val); + break; case IIO_PRESSURE: ret = bmp280_write_oversampling_ratio_press(data, val); break; @@ -535,6 +690,37 @@ static const struct bmp280_chip_info bmp280_chip_info = { .read_press = bmp280_read_press, }; +static int bme280_chip_config(struct bmp280_data *data) +{ + int ret = bmp280_chip_config(data); + u8 osrs = BMP280_OSRS_HUMIDITIY_X(data->oversampling_humid + 1); + + if (ret < 0) + return ret; + + return regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY, + BMP280_OSRS_HUMIDITY_MASK, osrs); +} + +static const struct bmp280_chip_info bme280_chip_info = { + .regmap_config = &bmp280_regmap_config, + + .oversampling_temp_avail = bmp280_oversampling_avail, + .num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .oversampling_press_avail = bmp280_oversampling_avail, + .num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .oversampling_humid_avail = bmp280_oversampling_avail, + .num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail), + + .chip_config = bme280_chip_config, + .read_temp = bmp280_read_temp, + .read_press = bmp280_read_press, + .read_humid = bmp280_read_humid, +}; + + static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg) { switch (reg) { @@ -849,21 +1035,29 @@ static int bmp280_probe(struct i2c_client *client, indio_dev->dev.parent = &client->dev; indio_dev->name = id->name; indio_dev->channels = bmp280_channels; - indio_dev->num_channels = ARRAY_SIZE(bmp280_channels); indio_dev->info = &bmp280_info; indio_dev->modes = INDIO_DIRECT_MODE; switch (id->driver_data) { case BMP180_CHIP_ID: + indio_dev->num_channels = 2; data->chip_info = &bmp180_chip_info; data->oversampling_press = ilog2(8); data->oversampling_temp = ilog2(1); break; case BMP280_CHIP_ID: + indio_dev->num_channels = 2; data->chip_info = &bmp280_chip_info; data->oversampling_press = ilog2(16); data->oversampling_temp = ilog2(2); break; + case BME280_CHIP_ID: + indio_dev->num_channels = 3; + data->chip_info = &bme280_chip_info; + data->oversampling_press = ilog2(16); + data->oversampling_humid = ilog2(16); + data->oversampling_temp = ilog2(2); + break; default: return -EINVAL; } @@ -895,6 +1089,7 @@ static const struct acpi_device_id bmp280_acpi_match[] = { {"BMP0280", BMP280_CHIP_ID }, {"BMP0180", BMP180_CHIP_ID }, {"BMP0085", BMP180_CHIP_ID }, + {"BME0280", BME280_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match); @@ -903,6 +1098,7 @@ static const struct i2c_device_id bmp280_id[] = { {"bmp280", BMP280_CHIP_ID }, {"bmp180", BMP180_CHIP_ID }, {"bmp085", BMP180_CHIP_ID }, + {"bme280", BME280_CHIP_ID }, { }, }; MODULE_DEVICE_TABLE(i2c, bmp280_id); diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c index 90f2b6e4a920..12f769e86355 100644 --- a/drivers/iio/pressure/hp206c.c +++ b/drivers/iio/pressure/hp206c.c @@ -401,6 +401,7 @@ static const struct i2c_device_id hp206c_id[] = { {"hp206c"}, {} }; +MODULE_DEVICE_TABLE(i2c, hp206c_id); #ifdef CONFIG_ACPI static const struct acpi_device_id hp206c_acpi_match[] = { diff --git a/drivers/iio/pressure/ms5637.c b/drivers/iio/pressure/ms5637.c index e68052c118e6..953ffbc0ef96 100644 --- a/drivers/iio/pressure/ms5637.c +++ b/drivers/iio/pressure/ms5637.c @@ -1,6 +1,6 @@ /* - * ms5637.c - Support for Measurement-Specialties ms5637 and ms8607 - * pressure & temperature sensor + * ms5637.c - Support for Measurement-Specialties MS5637, MS5805 + * MS5837 and MS8607 pressure & temperature sensor * * Copyright (c) 2015 Measurement-Specialties * @@ -11,6 +11,10 @@ * Datasheet: * http://www.meas-spec.com/downloads/MS5637-02BA03.pdf * Datasheet: + * http://www.meas-spec.com/downloads/MS5805-02BA01.pdf + * Datasheet: + * http://www.meas-spec.com/downloads/MS5837-30BA.pdf + * Datasheet: * http://www.meas-spec.com/downloads/MS8607-02BA01.pdf */ @@ -170,9 +174,12 @@ static int ms5637_probe(struct i2c_client *client, static const struct i2c_device_id ms5637_id[] = { {"ms5637", 0}, - {"ms8607-temppressure", 1}, + {"ms5805", 0}, + {"ms5837", 0}, + {"ms8607-temppressure", 0}, {} }; +MODULE_DEVICE_TABLE(i2c, ms5637_id); static struct i2c_driver ms5637_driver = { .probe = ms5637_probe, diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h index f5f41490060b..903a21e46874 100644 --- a/drivers/iio/pressure/st_pressure.h +++ b/drivers/iio/pressure/st_pressure.h @@ -17,6 +17,7 @@ #define LPS001WP_PRESS_DEV_NAME "lps001wp" #define LPS25H_PRESS_DEV_NAME "lps25h" #define LPS331AP_PRESS_DEV_NAME "lps331ap" +#define LPS22HB_PRESS_DEV_NAME "lps22hb" /** * struct st_sensors_platform_data - default press platform data diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 92a118c3c4ac..56d8f5eb9239 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -117,6 +117,26 @@ #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 #define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b +/* CUSTOM VALUES FOR LPS22HB SENSOR */ +#define ST_PRESS_LPS22HB_WAI_EXP 0xb1 +#define ST_PRESS_LPS22HB_ODR_ADDR 0x10 +#define ST_PRESS_LPS22HB_ODR_MASK 0x70 +#define ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL 0x01 +#define ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL 0x02 +#define ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL 0x03 +#define ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL 0x04 +#define ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL 0x05 +#define ST_PRESS_LPS22HB_PW_ADDR 0x10 +#define ST_PRESS_LPS22HB_PW_MASK 0x70 +#define ST_PRESS_LPS22HB_BDU_ADDR 0x10 +#define ST_PRESS_LPS22HB_BDU_MASK 0x02 +#define ST_PRESS_LPS22HB_DRDY_IRQ_ADDR 0x12 +#define ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK 0x04 +#define ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK 0x08 +#define ST_PRESS_LPS22HB_IHL_IRQ_ADDR 0x12 +#define ST_PRESS_LPS22HB_IHL_IRQ_MASK 0x80 +#define ST_PRESS_LPS22HB_MULTIREAD_BIT true + static const struct iio_chan_spec st_press_1_channels[] = { { .type = IIO_PRESSURE, @@ -189,6 +209,27 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(1) }; +static const struct iio_chan_spec st_press_lps22hb_channels[] = { + { + .type = IIO_PRESSURE, + .channel2 = IIO_NO_MOD, + .address = ST_PRESS_1_OUT_XL_ADDR, + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 24, + .storagebits = 24, + .endianness = IIO_LE, + }, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .modified = 0, + }, + IIO_CHAN_SOFT_TIMESTAMP(1) +}; + static const struct st_sensor_settings st_press_sensors_settings[] = { { .wai = ST_PRESS_LPS331AP_WAI_EXP, @@ -346,6 +387,51 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, .bootime = 2, }, + { + .wai = ST_PRESS_LPS22HB_WAI_EXP, + .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, + .sensors_supported = { + [0] = LPS22HB_PRESS_DEV_NAME, + }, + .ch = (struct iio_chan_spec *)st_press_lps22hb_channels, + .num_ch = ARRAY_SIZE(st_press_lps22hb_channels), + .odr = { + .addr = ST_PRESS_LPS22HB_ODR_ADDR, + .mask = ST_PRESS_LPS22HB_ODR_MASK, + .odr_avl = { + { 1, ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL, }, + { 10, ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL, }, + { 25, ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL, }, + { 50, ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL, }, + { 75, ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL, }, + }, + }, + .pw = { + .addr = ST_PRESS_LPS22HB_PW_ADDR, + .mask = ST_PRESS_LPS22HB_PW_MASK, + .value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE, + }, + .fs = { + .fs_avl = { + [0] = { + .num = ST_PRESS_FS_AVL_1260MB, + .gain = ST_PRESS_KPASCAL_NANO_SCALE, + }, + }, + }, + .bdu = { + .addr = ST_PRESS_LPS22HB_BDU_ADDR, + .mask = ST_PRESS_LPS22HB_BDU_MASK, + }, + .drdy_irq = { + .addr = ST_PRESS_LPS22HB_DRDY_IRQ_ADDR, + .mask_int1 = ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK, + .mask_int2 = ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_PRESS_LPS22HB_IHL_IRQ_ADDR, + .mask_ihl = ST_PRESS_LPS22HB_IHL_IRQ_MASK, + }, + .multi_read_bit = ST_PRESS_LPS22HB_MULTIREAD_BIT, + }, }; static int st_press_write_raw(struct iio_dev *indio_dev, @@ -462,23 +548,24 @@ int st_press_common_probe(struct iio_dev *indio_dev) indio_dev->info = &press_info; mutex_init(&press_data->tb.buf_lock); - st_sensors_power_enable(indio_dev); + err = st_sensors_power_enable(indio_dev); + if (err) + return err; err = st_sensors_check_device_support(indio_dev, ARRAY_SIZE(st_press_sensors_settings), st_press_sensors_settings); if (err < 0) - return err; + goto st_press_power_off; press_data->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS; press_data->multiread_bit = press_data->sensor_settings->multi_read_bit; indio_dev->channels = press_data->sensor_settings->ch; indio_dev->num_channels = press_data->sensor_settings->num_ch; - if (press_data->sensor_settings->fs.addr != 0) - press_data->current_fullscale = - (struct st_sensor_fullscale_avl *) - &press_data->sensor_settings->fs.fs_avl[0]; + press_data->current_fullscale = + (struct st_sensor_fullscale_avl *) + &press_data->sensor_settings->fs.fs_avl[0]; press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz; @@ -490,11 +577,11 @@ int st_press_common_probe(struct iio_dev *indio_dev) err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data); if (err < 0) - return err; + goto st_press_power_off; err = st_press_allocate_ring(indio_dev); if (err < 0) - return err; + goto st_press_power_off; if (irq > 0) { err = st_sensors_allocate_trigger(indio_dev, @@ -517,6 +604,8 @@ st_press_device_register_error: st_sensors_deallocate_trigger(indio_dev); st_press_probe_trigger_error: st_press_deallocate_ring(indio_dev); +st_press_power_off: + st_sensors_power_disable(indio_dev); return err; } diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c index 8fcf9766eaec..ed18701c68c9 100644 --- a/drivers/iio/pressure/st_pressure_i2c.c +++ b/drivers/iio/pressure/st_pressure_i2c.c @@ -32,6 +32,10 @@ static const struct of_device_id st_press_of_match[] = { .compatible = "st,lps331ap-press", .data = LPS331AP_PRESS_DEV_NAME, }, + { + .compatible = "st,lps22hb-press", + .data = LPS22HB_PRESS_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_press_of_match); diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c index 40c0692ff1de..550508025af1 100644 --- a/drivers/iio/pressure/st_pressure_spi.c +++ b/drivers/iio/pressure/st_pressure_spi.c @@ -50,6 +50,7 @@ static const struct spi_device_id st_press_id_table[] = { { LPS001WP_PRESS_DEV_NAME }, { LPS25H_PRESS_DEV_NAME }, { LPS331AP_PRESS_DEV_NAME }, + { LPS22HB_PRESS_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(spi, st_press_id_table); diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index e2f926cdcad2..2e3a70e1b245 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -231,10 +231,16 @@ static void as3935_event_work(struct work_struct *work) { struct as3935_state *st; int val; + int ret; st = container_of(work, struct as3935_state, work.work); - as3935_read(st, AS3935_INT, &val); + ret = as3935_read(st, AS3935_INT, &val); + if (ret) { + dev_warn(&st->spi->dev, "read error\n"); + return; + } + val &= AS3935_INT_MASK; switch (val) { @@ -242,7 +248,7 @@ static void as3935_event_work(struct work_struct *work) iio_trigger_poll(st->trig); break; case AS3935_NOISE_INT: - dev_warn(&st->spi->dev, "noise level is too high"); + dev_warn(&st->spi->dev, "noise level is too high\n"); break; } } @@ -346,7 +352,6 @@ static int as3935_probe(struct spi_device *spi) st = iio_priv(indio_dev); st->spi = spi; - st->tune_cap = 0; spi_set_drvdata(spi, indio_dev); mutex_init(&st->lock); @@ -468,4 +473,3 @@ module_spi_driver(as3935_driver); MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>"); MODULE_DESCRIPTION("AS3935 lightning sensor"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("spi:as3935"); diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c index 4f502386aa86..c0b0e82abf94 100644 --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c @@ -203,22 +203,19 @@ static int lidar_read_raw(struct iio_dev *indio_dev, struct lidar_data *data = iio_priv(indio_dev); int ret = -EINVAL; - mutex_lock(&indio_dev->mlock); - - if (iio_buffer_enabled(indio_dev) && mask == IIO_CHAN_INFO_RAW) { - ret = -EBUSY; - goto error_busy; - } - switch (mask) { case IIO_CHAN_INFO_RAW: { u16 reg; + if (iio_device_claim_direct_mode(indio_dev)) + return -EBUSY; + ret = lidar_get_measurement(data, ®); if (!ret) { *val = reg; ret = IIO_VAL_INT; } + iio_device_release_direct_mode(indio_dev); break; } case IIO_CHAN_INFO_SCALE: @@ -228,9 +225,6 @@ static int lidar_read_raw(struct iio_dev *indio_dev, break; } -error_busy: - mutex_unlock(&indio_dev->mlock); - return ret; } diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c index ab6fe8f6f2d1..c0a19a000387 100644 --- a/drivers/iio/temperature/tsys02d.c +++ b/drivers/iio/temperature/tsys02d.c @@ -174,6 +174,7 @@ static const struct i2c_device_id tsys02d_id[] = { {"tsys02d", 0}, {} }; +MODULE_DEVICE_TABLE(i2c, tsys02d_id); static struct i2c_driver tsys02d_driver = { .probe = tsys02d_probe, diff --git a/drivers/iio/trigger/Kconfig b/drivers/iio/trigger/Kconfig index 519e6772f6f5..809b2e7d58fa 100644 --- a/drivers/iio/trigger/Kconfig +++ b/drivers/iio/trigger/Kconfig @@ -24,6 +24,18 @@ config IIO_INTERRUPT_TRIGGER To compile this driver as a module, choose M here: the module will be called iio-trig-interrupt. +config IIO_TIGHTLOOP_TRIGGER + tristate "A kthread based hammering loop trigger" + depends on IIO_SW_TRIGGER + help + An experimental trigger, used to allow sensors to be sampled as fast + as possible under the limitations of whatever else is going on. + Uses a tight loop in a kthread. Will only work with lower half only + trigger consumers. + + To compile this driver as a module, choose M here: the + module will be called iio-trig-loop. + config IIO_SYSFS_TRIGGER tristate "SYSFS trigger" depends on SYSFS diff --git a/drivers/iio/trigger/Makefile b/drivers/iio/trigger/Makefile index fe06eb564367..aab4dc23303d 100644 --- a/drivers/iio/trigger/Makefile +++ b/drivers/iio/trigger/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_IIO_HRTIMER_TRIGGER) += iio-trig-hrtimer.o obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o +obj-$(CONFIG_IIO_TIGHTLOOP_TRIGGER) += iio-trig-loop.o diff --git a/drivers/iio/trigger/iio-trig-loop.c b/drivers/iio/trigger/iio-trig-loop.c new file mode 100644 index 000000000000..dc6be28f96fe --- /dev/null +++ b/drivers/iio/trigger/iio-trig-loop.c @@ -0,0 +1,143 @@ +/* + * Copyright 2016 Jonathan Cameron <jic23@kernel.org> + * + * Licensed under the GPL-2. + * + * Based on a mashup of the hrtimer trigger and continuous sampling proposal of + * Gregor Boirie <gregor.boirie@parrot.com> + * + * Note this is still rather experimental and may eat babies. + * + * Todo + * * Protect against connection of devices that 'need' the top half + * handler. + * * Work out how to run top half handlers in this context if it is + * safe to do so (timestamp grabbing for example) + * + * Tested against a max1363. Used about 33% cpu for the thread and 20% + * for generic_buffer piping to /dev/null. Watermark set at 64 on a 128 + * element kfifo buffer. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/irq_work.h> +#include <linux/kthread.h> +#include <linux/freezer.h> + +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> +#include <linux/iio/sw_trigger.h> + +struct iio_loop_info { + struct iio_sw_trigger swt; + struct task_struct *task; +}; + +static struct config_item_type iio_loop_type = { + .ct_owner = THIS_MODULE, +}; + +static int iio_loop_thread(void *data) +{ + struct iio_trigger *trig = data; + + set_freezable(); + + do { + iio_trigger_poll_chained(trig); + } while (likely(!kthread_freezable_should_stop(NULL))); + + return 0; +} + +static int iio_loop_trigger_set_state(struct iio_trigger *trig, bool state) +{ + struct iio_loop_info *loop_trig = iio_trigger_get_drvdata(trig); + + if (state) { + loop_trig->task = kthread_run(iio_loop_thread, + trig, trig->name); + if (unlikely(IS_ERR(loop_trig->task))) { + dev_err(&trig->dev, + "failed to create trigger loop thread\n"); + return PTR_ERR(loop_trig->task); + } + } else { + kthread_stop(loop_trig->task); + } + + return 0; +} + +static const struct iio_trigger_ops iio_loop_trigger_ops = { + .set_trigger_state = iio_loop_trigger_set_state, + .owner = THIS_MODULE, +}; + +static struct iio_sw_trigger *iio_trig_loop_probe(const char *name) +{ + struct iio_loop_info *trig_info; + int ret; + + trig_info = kzalloc(sizeof(*trig_info), GFP_KERNEL); + if (!trig_info) + return ERR_PTR(-ENOMEM); + + trig_info->swt.trigger = iio_trigger_alloc("%s", name); + if (!trig_info->swt.trigger) { + ret = -ENOMEM; + goto err_free_trig_info; + } + + iio_trigger_set_drvdata(trig_info->swt.trigger, trig_info); + trig_info->swt.trigger->ops = &iio_loop_trigger_ops; + + ret = iio_trigger_register(trig_info->swt.trigger); + if (ret) + goto err_free_trigger; + + iio_swt_group_init_type_name(&trig_info->swt, name, &iio_loop_type); + + return &trig_info->swt; + +err_free_trigger: + iio_trigger_free(trig_info->swt.trigger); +err_free_trig_info: + kfree(trig_info); + + return ERR_PTR(ret); +} + +static int iio_trig_loop_remove(struct iio_sw_trigger *swt) +{ + struct iio_loop_info *trig_info; + + trig_info = iio_trigger_get_drvdata(swt->trigger); + + iio_trigger_unregister(swt->trigger); + iio_trigger_free(swt->trigger); + kfree(trig_info); + + return 0; +} + +static const struct iio_sw_trigger_ops iio_trig_loop_ops = { + .probe = iio_trig_loop_probe, + .remove = iio_trig_loop_remove, +}; + +static struct iio_sw_trigger_type iio_trig_loop = { + .name = "loop", + .owner = THIS_MODULE, + .ops = &iio_trig_loop_ops, +}; + +module_iio_sw_trigger_driver(iio_trig_loop); + +MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); +MODULE_DESCRIPTION("Loop based trigger for the iio subsystem"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:iio-trig-loop"); |