diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 27 | ||||
| -rw-r--r-- | drivers/iio/adc/Makefile | 3 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7606.c | 583 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7606.h | 99 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7606_par.c | 105 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7606_spi.c | 82 |
6 files changed, 899 insertions, 0 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 7a3ca4ec0cb7..f3cc7a31bce5 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -69,6 +69,33 @@ config AD7476 To compile this driver as a module, choose M here: the module will be called ad7476. +config AD7606 + tristate + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + +config AD7606_IFACE_PARALLEL + tristate "Analog Devices AD7606 ADC driver with parallel interface support" + depends on HAS_IOMEM + select AD7606 + help + Say yes here to build parallel interface support for Analog Devices: + ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the + module will be called ad7606_parallel. + +config AD7606_IFACE_SPI + tristate "Analog Devices AD7606 ADC driver with spi interface support" + depends on SPI + select AD7606 + help + Say yes here to build spi interface support for Analog Devices: + ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the + module will be called ad7606_spi. + config AD7766 tristate "Analog Devices AD7766/AD7767 ADC driver" depends on SPI_MASTER diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 07df37f621bd..ea5031348052 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -11,6 +11,9 @@ obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7298) += ad7298.o obj-$(CONFIG_AD7923) += ad7923.o obj-$(CONFIG_AD7476) += ad7476.o +obj-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o +obj-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o +obj-$(CONFIG_AD7606) += ad7606.o obj-$(CONFIG_AD7766) += ad7766.o obj-$(CONFIG_AD7791) += ad7791.o obj-$(CONFIG_AD7793) += ad7793.o diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c new file mode 100644 index 000000000000..ebb8de03bbce --- /dev/null +++ b/drivers/iio/adc/ad7606.c @@ -0,0 +1,583 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD7606 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/util_macros.h> + +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#include "ad7606.h" + +/* + * Scales are computed as 5000/32768 and 10000/32768 respectively, + * so that when applied to the raw values they provide mV values + */ +static const unsigned int scale_avail[2] = { + 152588, 305176 +}; + +static const unsigned int ad7606_oversampling_avail[7] = { + 1, 2, 4, 8, 16, 32, 64, +}; + +static int ad7606_reset(struct ad7606_state *st) +{ + if (st->gpio_reset) { + gpiod_set_value(st->gpio_reset, 1); + ndelay(100); /* t_reset >= 100ns */ + gpiod_set_value(st->gpio_reset, 0); + return 0; + } + + return -ENODEV; +} + +static int ad7606_read_samples(struct ad7606_state *st) +{ + unsigned int num = st->chip_info->num_channels; + u16 *data = st->data; + int ret; + + /* + * The frstdata signal is set to high while and after reading the sample + * of the first channel and low for all other channels. This can be used + * to check that the incoming data is correctly aligned. During normal + * operation the data should never become unaligned, but some glitch or + * electrostatic discharge might cause an extra read or clock cycle. + * Monitoring the frstdata signal allows to recover from such failure + * situations. + */ + + if (st->gpio_frstdata) { + ret = st->bops->read_block(st->dev, 1, data); + if (ret) + return ret; + + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + + data++; + num--; + } + + return st->bops->read_block(st->dev, num, data); +} + +static irqreturn_t ad7606_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad7606_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&st->lock); + + ret = ad7606_read_samples(st); + if (ret == 0) + iio_push_to_buffers_with_timestamp(indio_dev, st->data, + iio_get_time_ns(indio_dev)); + + iio_trigger_notify_done(indio_dev->trig); + /* The rising edge of the CONVST signal starts a new conversion. */ + gpiod_set_value(st->gpio_convst, 1); + + mutex_unlock(&st->lock); + + return IRQ_HANDLED; +} + +static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch) +{ + struct ad7606_state *st = iio_priv(indio_dev); + int ret; + + gpiod_set_value(st->gpio_convst, 1); + ret = wait_for_completion_timeout(&st->completion, + msecs_to_jiffies(1000)); + if (!ret) { + ret = -ETIMEDOUT; + goto error_ret; + } + + ret = ad7606_read_samples(st); + if (ret == 0) + ret = st->data[ch]; + +error_ret: + gpiod_set_value(st->gpio_convst, 0); + + return ret; +} + +static int ad7606_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + int ret; + struct ad7606_state *st = iio_priv(indio_dev); + + switch (m) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(indio_dev); + if (ret) + return ret; + + ret = ad7606_scan_direct(indio_dev, chan->address); + iio_device_release_direct_mode(indio_dev); + + if (ret < 0) + return ret; + *val = (short)ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = scale_avail[st->range]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling; + return IIO_VAL_INT; + } + return -EINVAL; +} + +static ssize_t in_voltage_scale_available_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(scale_avail); i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + scale_avail[i]); + + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0); + +static int ad7606_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad7606_state *st = iio_priv(indio_dev); + DECLARE_BITMAP(values, 3); + int i; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + mutex_lock(&st->lock); + i = find_closest(val2, scale_avail, ARRAY_SIZE(scale_avail)); + gpiod_set_value(st->gpio_range, i); + st->range = i; + mutex_unlock(&st->lock); + + return 0; + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + if (val2) + return -EINVAL; + i = find_closest(val, ad7606_oversampling_avail, + ARRAY_SIZE(ad7606_oversampling_avail)); + + values[0] = i; + + mutex_lock(&st->lock); + gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc, + st->gpio_os->info, values); + st->oversampling = ad7606_oversampling_avail[i]; + mutex_unlock(&st->lock); + + return 0; + default: + return -EINVAL; + } +} + +static IIO_CONST_ATTR(oversampling_ratio_available, "1 2 4 8 16 32 64"); + +static struct attribute *ad7606_attributes_os_and_range[] = { + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_os_and_range = { + .attrs = ad7606_attributes_os_and_range, +}; + +static struct attribute *ad7606_attributes_os[] = { + &iio_const_attr_oversampling_ratio_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_os = { + .attrs = ad7606_attributes_os, +}; + +static struct attribute *ad7606_attributes_range[] = { + &iio_dev_attr_in_voltage_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad7606_attribute_group_range = { + .attrs = ad7606_attributes_range, +}; + +#define AD760X_CHANNEL(num, mask) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = num, \ + .address = num, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),\ + .info_mask_shared_by_all = mask, \ + .scan_index = num, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_CPU, \ + }, \ +} + +#define AD7605_CHANNEL(num) \ + AD760X_CHANNEL(num, 0) + +#define AD7606_CHANNEL(num) \ + AD760X_CHANNEL(num, BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)) + +static const struct iio_chan_spec ad7605_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(4), + AD7605_CHANNEL(0), + AD7605_CHANNEL(1), + AD7605_CHANNEL(2), + AD7605_CHANNEL(3), +}; + +static const struct iio_chan_spec ad7606_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(8), + AD7606_CHANNEL(0), + AD7606_CHANNEL(1), + AD7606_CHANNEL(2), + AD7606_CHANNEL(3), + AD7606_CHANNEL(4), + AD7606_CHANNEL(5), + AD7606_CHANNEL(6), + AD7606_CHANNEL(7), +}; + +static const struct ad7606_chip_info ad7606_chip_info_tbl[] = { + /* More devices added in future */ + [ID_AD7605_4] = { + .channels = ad7605_channels, + .num_channels = 5, + }, + [ID_AD7606_8] = { + .channels = ad7606_channels, + .num_channels = 9, + .has_oversampling = true, + }, + [ID_AD7606_6] = { + .channels = ad7606_channels, + .num_channels = 7, + .has_oversampling = true, + }, + [ID_AD7606_4] = { + .channels = ad7606_channels, + .num_channels = 5, + .has_oversampling = true, + }, +}; + +static int ad7606_request_gpios(struct ad7606_state *st) +{ + struct device *dev = st->dev; + + st->gpio_convst = devm_gpiod_get(dev, "adi,conversion-start", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_convst)) + return PTR_ERR(st->gpio_convst); + + st->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_reset)) + return PTR_ERR(st->gpio_reset); + + st->gpio_range = devm_gpiod_get_optional(dev, "adi,range", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_range)) + return PTR_ERR(st->gpio_range); + + st->gpio_standby = devm_gpiod_get_optional(dev, "standby", + GPIOD_OUT_HIGH); + if (IS_ERR(st->gpio_standby)) + return PTR_ERR(st->gpio_standby); + + st->gpio_frstdata = devm_gpiod_get_optional(dev, "adi,first-data", + GPIOD_IN); + if (IS_ERR(st->gpio_frstdata)) + return PTR_ERR(st->gpio_frstdata); + + if (!st->chip_info->has_oversampling) + return 0; + + st->gpio_os = devm_gpiod_get_array_optional(dev, + "adi,oversampling-ratio", + GPIOD_OUT_LOW); + return PTR_ERR_OR_ZERO(st->gpio_os); +} + +/* + * The BUSY signal indicates when conversions are in progress, so when a rising + * edge of CONVST is applied, BUSY goes logic high and transitions low at the + * end of the entire conversion process. The falling edge of the BUSY signal + * triggers this interrupt. + */ +static irqreturn_t ad7606_interrupt(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct ad7606_state *st = iio_priv(indio_dev); + + if (iio_buffer_enabled(indio_dev)) { + gpiod_set_value(st->gpio_convst, 0); + iio_trigger_poll_chained(st->trig); + } else { + complete(&st->completion); + } + + return IRQ_HANDLED; +}; + +static int ad7606_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->trig != trig) + return -EINVAL; + + return 0; +} + +static int ad7606_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + iio_triggered_buffer_postenable(indio_dev); + gpiod_set_value(st->gpio_convst, 1); + + return 0; +} + +static int ad7606_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ad7606_state *st = iio_priv(indio_dev); + + gpiod_set_value(st->gpio_convst, 0); + + return iio_triggered_buffer_predisable(indio_dev); +} + +static const struct iio_buffer_setup_ops ad7606_buffer_ops = { + .postenable = &ad7606_buffer_postenable, + .predisable = &ad7606_buffer_predisable, +}; + +static const struct iio_info ad7606_info_no_os_or_range = { + .read_raw = &ad7606_read_raw, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_os_and_range = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_os_and_range, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_os = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_os, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_info ad7606_info_range = { + .read_raw = &ad7606_read_raw, + .write_raw = &ad7606_write_raw, + .attrs = &ad7606_attribute_group_range, + .validate_trigger = &ad7606_validate_trigger, +}; + +static const struct iio_trigger_ops ad7606_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, +}; + +static void ad7606_regulator_disable(void *data) +{ + struct ad7606_state *st = data; + + regulator_disable(st->reg); +} + +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops) +{ + struct ad7606_state *st; + int ret; + struct iio_dev *indio_dev; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + dev_set_drvdata(dev, indio_dev); + + st->dev = dev; + mutex_init(&st->lock); + st->bops = bops; + st->base_address = base_address; + /* tied to logic low, analog input range is +/- 5V */ + st->range = 0; + st->oversampling = 1; + + st->reg = devm_regulator_get(dev, "avcc"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + ret = regulator_enable(st->reg); + if (ret) { + dev_err(dev, "Failed to enable specified AVcc supply\n"); + return ret; + } + + ret = devm_add_action_or_reset(dev, ad7606_regulator_disable, st); + if (ret) + return ret; + + st->chip_info = &ad7606_chip_info_tbl[id]; + + ret = ad7606_request_gpios(st); + if (ret) + return ret; + + indio_dev->dev.parent = dev; + if (st->gpio_os) { + if (st->gpio_range) + indio_dev->info = &ad7606_info_os_and_range; + else + indio_dev->info = &ad7606_info_os; + } else { + if (st->gpio_range) + indio_dev->info = &ad7606_info_range; + else + indio_dev->info = &ad7606_info_no_os_or_range; + } + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->name = name; + indio_dev->channels = st->chip_info->channels; + indio_dev->num_channels = st->chip_info->num_channels; + + init_completion(&st->completion); + + ret = ad7606_reset(st); + if (ret) + dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n"); + + st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + if (!st->trig) + return -ENOMEM; + + st->trig->ops = &ad7606_trigger_ops; + st->trig->dev.parent = dev; + iio_trigger_set_drvdata(st->trig, indio_dev); + ret = devm_iio_trigger_register(dev, st->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(st->trig); + + ret = devm_request_threaded_irq(dev, irq, + NULL, + &ad7606_interrupt, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + name, indio_dev); + if (ret) + return ret; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, + &iio_pollfunc_store_time, + &ad7606_trigger_handler, + &ad7606_buffer_ops); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} +EXPORT_SYMBOL_GPL(ad7606_probe); + +#ifdef CONFIG_PM_SLEEP + +static int ad7606_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, 1); + gpiod_set_value(st->gpio_standby, 0); + } + + return 0; +} + +static int ad7606_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + if (st->gpio_standby) { + gpiod_set_value(st->gpio_range, st->range); + gpiod_set_value(st->gpio_standby, 1); + ad7606_reset(st); + } + + return 0; +} + +SIMPLE_DEV_PM_OPS(ad7606_pm_ops, ad7606_suspend, ad7606_resume); +EXPORT_SYMBOL_GPL(ad7606_pm_ops); + +#endif + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h new file mode 100644 index 000000000000..5d12410f68e1 --- /dev/null +++ b/drivers/iio/adc/ad7606.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * AD7606 ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#ifndef IIO_ADC_AD7606_H_ +#define IIO_ADC_AD7606_H_ + +/** + * struct ad7606_chip_info - chip specific information + * @channels: channel specification + * @num_channels: number of channels + * @has_oversampling: whether the device has oversampling support + */ +struct ad7606_chip_info { + const struct iio_chan_spec *channels; + unsigned int num_channels; + bool has_oversampling; +}; + +/** + * struct ad7606_state - driver instance specific data + * @dev pointer to kernel device + * @chip_info entry in the table of chips that describes this device + * @reg regulator info for the the power supply of the device + * @bops bus operations (SPI or parallel) + * @range voltage range selection, selects which scale to apply + * @oversampling oversampling selection + * @base_address address from where to read data in parallel operation + * @lock protect sensor state from concurrent accesses to GPIOs + * @gpio_convst GPIO descriptor for conversion start signal (CONVST) + * @gpio_reset GPIO descriptor for device hard-reset + * @gpio_range GPIO descriptor for range selection + * @gpio_standby GPIO descriptor for stand-by signal (STBY), + * controls power-down mode of device + * @gpio_frstdata GPIO descriptor for reading from device when data + * is being read on the first channel + * @gpio_os GPIO descriptors to control oversampling on the device + * @complete completion to indicate end of conversion + * @trig The IIO trigger associated with the device. + * @data buffer for reading data from the device + */ +struct ad7606_state { + struct device *dev; + const struct ad7606_chip_info *chip_info; + struct regulator *reg; + const struct ad7606_bus_ops *bops; + unsigned int range; + unsigned int oversampling; + void __iomem *base_address; + + struct mutex lock; /* protect sensor state */ + struct gpio_desc *gpio_convst; + struct gpio_desc *gpio_reset; + struct gpio_desc *gpio_range; + struct gpio_desc *gpio_standby; + struct gpio_desc *gpio_frstdata; + struct gpio_descs *gpio_os; + struct iio_trigger *trig; + struct completion completion; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + * 8 * 16-bit samples + 64-bit timestamp + */ + unsigned short data[12] ____cacheline_aligned; +}; + +/** + * struct ad7606_bus_ops - driver bus operations + * @read_block function pointer for reading blocks of data + */ +struct ad7606_bus_ops { + /* more methods added in future? */ + int (*read_block)(struct device *dev, int num, void *data); +}; + +int ad7606_probe(struct device *dev, int irq, void __iomem *base_address, + const char *name, unsigned int id, + const struct ad7606_bus_ops *bops); + +enum ad7606_supported_device_ids { + ID_AD7605_4, + ID_AD7606_8, + ID_AD7606_6, + ID_AD7606_4 +}; + +#ifdef CONFIG_PM_SLEEP +extern const struct dev_pm_ops ad7606_pm_ops; +#define AD7606_PM_OPS (&ad7606_pm_ops) +#else +#define AD7606_PM_OPS NULL +#endif + +#endif /* IIO_ADC_AD7606_H_ */ diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c new file mode 100644 index 000000000000..1b08028facde --- /dev/null +++ b/drivers/iio/adc/ad7606_par.c @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD7606 Parallel Interface ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/err.h> +#include <linux/io.h> + +#include <linux/iio/iio.h> +#include "ad7606.h" + +static int ad7606_par16_read_block(struct device *dev, + int count, void *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + insw((unsigned long)st->base_address, buf, count); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_par16_bops = { + .read_block = ad7606_par16_read_block, +}; + +static int ad7606_par8_read_block(struct device *dev, + int count, void *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7606_state *st = iio_priv(indio_dev); + + insb((unsigned long)st->base_address, buf, count * 2); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_par8_bops = { + .read_block = ad7606_par8_read_block, +}; + +static int ad7606_par_probe(struct platform_device *pdev) +{ + const struct platform_device_id *id = platform_get_device_id(pdev); + struct resource *res; + void __iomem *addr; + resource_size_t remap_size; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq: %d\n", irq); + return irq; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + addr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(addr)) + return PTR_ERR(addr); + + remap_size = resource_size(res); + + return ad7606_probe(&pdev->dev, irq, addr, + id->name, id->driver_data, + remap_size > 1 ? &ad7606_par16_bops : + &ad7606_par8_bops); +} + +static const struct platform_device_id ad7606_driver_ids[] = { + { .name = "ad7605-4", .driver_data = ID_AD7605_4, }, + { .name = "ad7606-4", .driver_data = ID_AD7606_4, }, + { .name = "ad7606-6", .driver_data = ID_AD7606_6, }, + { .name = "ad7606-8", .driver_data = ID_AD7606_8, }, + { } +}; +MODULE_DEVICE_TABLE(platform, ad7606_driver_ids); + +static const struct of_device_id ad7606_of_match[] = { + { .compatible = "adi,ad7605-4" }, + { .compatible = "adi,ad7606-4" }, + { .compatible = "adi,ad7606-6" }, + { .compatible = "adi,ad7606-8" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad7606_of_match); + +static struct platform_driver ad7606_driver = { + .probe = ad7606_par_probe, + .id_table = ad7606_driver_ids, + .driver = { + .name = "ad7606", + .pm = AD7606_PM_OPS, + .of_match_table = ad7606_of_match, + }, +}; +module_platform_driver(ad7606_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/ad7606_spi.c b/drivers/iio/adc/ad7606_spi.c new file mode 100644 index 000000000000..4fd0ec36a086 --- /dev/null +++ b/drivers/iio/adc/ad7606_spi.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AD7606 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/types.h> +#include <linux/err.h> + +#include <linux/iio/iio.h> +#include "ad7606.h" + +#define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */ + +static int ad7606_spi_read_block(struct device *dev, + int count, void *buf) +{ + struct spi_device *spi = to_spi_device(dev); + int i, ret; + unsigned short *data = buf; + __be16 *bdata = buf; + + ret = spi_read(spi, buf, count * 2); + if (ret < 0) { + dev_err(&spi->dev, "SPI read error\n"); + return ret; + } + + for (i = 0; i < count; i++) + data[i] = be16_to_cpu(bdata[i]); + + return 0; +} + +static const struct ad7606_bus_ops ad7606_spi_bops = { + .read_block = ad7606_spi_read_block, +}; + +static int ad7606_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return ad7606_probe(&spi->dev, spi->irq, NULL, + id->name, id->driver_data, + &ad7606_spi_bops); +} + +static const struct spi_device_id ad7606_id_table[] = { + { "ad7605-4", ID_AD7605_4 }, + { "ad7606-4", ID_AD7606_4 }, + { "ad7606-6", ID_AD7606_6 }, + { "ad7606-8", ID_AD7606_8 }, + {} +}; +MODULE_DEVICE_TABLE(spi, ad7606_id_table); + +static const struct of_device_id ad7606_of_match[] = { + { .compatible = "adi,ad7605-4" }, + { .compatible = "adi,ad7606-4" }, + { .compatible = "adi,ad7606-6" }, + { .compatible = "adi,ad7606-8" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ad7606_of_match); + +static struct spi_driver ad7606_driver = { + .driver = { + .name = "ad7606", + .of_match_table = ad7606_of_match, + .pm = AD7606_PM_OPS, + }, + .probe = ad7606_spi_probe, + .id_table = ad7606_id_table, +}; +module_spi_driver(ad7606_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); +MODULE_LICENSE("GPL v2"); |