diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/ti_am335x_adc.c | 6 | ||||
| -rw-r--r-- | drivers/iio/common/st_sensors/st_sensors_trigger.c | 31 | ||||
| -rw-r--r-- | drivers/iio/dac/ad5504.c | 4 | ||||
| -rw-r--r-- | drivers/iio/proximity/sx9310.c | 5 | ||||
| -rw-r--r-- | drivers/iio/temperature/mlx90632.c | 6 |
5 files changed, 29 insertions, 23 deletions
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index b11c8c47ba2a..e946903b0993 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -397,16 +397,12 @@ static int tiadc_iio_buffered_hardware_setup(struct device *dev, ret = devm_request_threaded_irq(dev, irq, pollfunc_th, pollfunc_bh, flags, indio_dev->name, indio_dev); if (ret) - goto error_kfifo_free; + return ret; indio_dev->setup_ops = setup_ops; indio_dev->modes |= INDIO_BUFFER_SOFTWARE; return 0; - -error_kfifo_free: - iio_kfifo_free(indio_dev->buffer); - return ret; } static const char * const chan_name_ain[] = { diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 0507283bd4c1..2dbd2646e44e 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -23,35 +23,31 @@ * @sdata: Sensor data. * * returns: - * 0 - no new samples available - * 1 - new samples available - * negative - error or unknown + * false - no new samples available or read error + * true - new samples available */ -static int st_sensors_new_samples_available(struct iio_dev *indio_dev, - struct st_sensor_data *sdata) +static bool st_sensors_new_samples_available(struct iio_dev *indio_dev, + struct st_sensor_data *sdata) { int ret, status; /* How would I know if I can't check it? */ if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) - return -EINVAL; + return true; /* No scan mask, no interrupt */ if (!indio_dev->active_scan_mask) - return 0; + return false; ret = regmap_read(sdata->regmap, sdata->sensor_settings->drdy_irq.stat_drdy.addr, &status); if (ret < 0) { dev_err(sdata->dev, "error checking samples available\n"); - return ret; + return false; } - if (status & sdata->sensor_settings->drdy_irq.stat_drdy.mask) - return 1; - - return 0; + return !!(status & sdata->sensor_settings->drdy_irq.stat_drdy.mask); } /** @@ -180,9 +176,15 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, /* Tell the interrupt handler that we're dealing with edges */ if (irq_trig == IRQF_TRIGGER_FALLING || - irq_trig == IRQF_TRIGGER_RISING) + irq_trig == IRQF_TRIGGER_RISING) { + if (!sdata->sensor_settings->drdy_irq.stat_drdy.addr) { + dev_err(&indio_dev->dev, + "edge IRQ not supported w/o stat register.\n"); + err = -EOPNOTSUPP; + goto iio_trigger_free; + } sdata->edge_irq = true; - else + } else { /* * If we're not using edges (i.e. level interrupts) we * just mask off the IRQ, handle one interrupt, then @@ -190,6 +192,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, * interrupt handler top half again and start over. */ irq_trig |= IRQF_ONESHOT; + } /* * If the interrupt pin is Open Drain, by definition this diff --git a/drivers/iio/dac/ad5504.c b/drivers/iio/dac/ad5504.c index 28921b62e642..e9297c25d4ef 100644 --- a/drivers/iio/dac/ad5504.c +++ b/drivers/iio/dac/ad5504.c @@ -187,9 +187,9 @@ static ssize_t ad5504_write_dac_powerdown(struct iio_dev *indio_dev, return ret; if (pwr_down) - st->pwr_down_mask |= (1 << chan->channel); - else st->pwr_down_mask &= ~(1 << chan->channel); + else + st->pwr_down_mask |= (1 << chan->channel); ret = ad5504_spi_write(st, AD5504_ADDR_CTRL, AD5504_DAC_PWRDWN_MODE(st->pwr_down_mode) | diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c index a2f820997afc..37fd0b65a014 100644 --- a/drivers/iio/proximity/sx9310.c +++ b/drivers/iio/proximity/sx9310.c @@ -601,7 +601,7 @@ static int sx9310_read_thresh(struct sx9310_data *data, return ret; regval = FIELD_GET(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval); - if (regval > ARRAY_SIZE(sx9310_pthresh_codes)) + if (regval >= ARRAY_SIZE(sx9310_pthresh_codes)) return -EINVAL; *val = sx9310_pthresh_codes[regval]; @@ -1305,7 +1305,8 @@ sx9310_get_default_reg(struct sx9310_data *data, int i, if (ret) break; - pos = min(max(ilog2(pos), 3), 10) - 3; + /* Powers of 2, except for a gap between 16 and 64 */ + pos = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3); reg_def->def &= ~SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK; reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK, pos); diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c index 503fe54a0bb9..608ccb1d8bc8 100644 --- a/drivers/iio/temperature/mlx90632.c +++ b/drivers/iio/temperature/mlx90632.c @@ -248,6 +248,12 @@ static int mlx90632_set_meas_type(struct regmap *regmap, u8 type) if (ret < 0) return ret; + /* + * Give the mlx90632 some time to reset properly before sending a new I2C command + * if this is not done, the following I2C command(s) will not be accepted. + */ + usleep_range(150, 200); + ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL, (MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK), (MLX90632_MTYP_STATUS(type) | MLX90632_PWR_STATUS_HALT)); |