diff options
Diffstat (limited to 'drivers/iio')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/iio/adc/at91_adc.c | 33 | ||||
| -rw-r--r-- | drivers/iio/adc/exynos_adc.c | 6 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 7 | ||||
| -rw-r--r-- | drivers/iio/industrialio-buffer.c | 6 | ||||
| -rw-r--r-- | drivers/iio/light/cm32181.c | 1 | ||||
| -rw-r--r-- | drivers/iio/light/cm36651.c | 22 |
7 files changed, 62 insertions, 17 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index d86196cfe4b4..24c28e3f93a3 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -106,7 +106,7 @@ config AT91_ADC Say yes here to build support for Atmel AT91 ADC. config EXYNOS_ADC - bool "Exynos ADC driver support" + tristate "Exynos ADC driver support" depends on OF help Core support for the ADC block found in the Samsung EXYNOS series @@ -114,7 +114,7 @@ config EXYNOS_ADC this resource. config LP8788_ADC - bool "LP8788 ADC driver" + tristate "LP8788 ADC driver" depends on MFD_LP8788 help Say yes here to build support for TI LP8788 ADC. diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 5b1aa027c034..89777ed9abd8 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -765,14 +765,17 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st, if (!pdata) return -EINVAL; + st->caps = (struct at91_adc_caps *) + platform_get_device_id(pdev)->driver_data; + st->use_external = pdata->use_external_triggers; st->vref_mv = pdata->vref; st->channels_mask = pdata->channels_used; - st->num_channels = pdata->num_channels; + st->num_channels = st->caps->num_channels; st->startup_time = pdata->startup_time; st->trigger_number = pdata->trigger_number; st->trigger_list = pdata->trigger_list; - st->registers = pdata->registers; + st->registers = &st->caps->registers; return 0; } @@ -1004,8 +1007,11 @@ static int at91_adc_probe(struct platform_device *pdev) * the best converted final value between two channels selection * The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock */ - shtim = round_up((st->sample_hold_time * adc_clk_khz / - 1000) - 1, 1); + if (st->sample_hold_time > 0) + shtim = round_up((st->sample_hold_time * adc_clk_khz / 1000) + - 1, 1); + else + shtim = 0; reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask; reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask; @@ -1101,7 +1107,6 @@ static int at91_adc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_OF static struct at91_adc_caps at91sam9260_caps = { .calc_startup_ticks = calc_startup_ticks_9260, .num_channels = 4, @@ -1154,11 +1159,27 @@ static const struct of_device_id at91_adc_dt_ids[] = { {}, }; MODULE_DEVICE_TABLE(of, at91_adc_dt_ids); -#endif + +static const struct platform_device_id at91_adc_ids[] = { + { + .name = "at91sam9260-adc", + .driver_data = (unsigned long)&at91sam9260_caps, + }, { + .name = "at91sam9g45-adc", + .driver_data = (unsigned long)&at91sam9g45_caps, + }, { + .name = "at91sam9x5-adc", + .driver_data = (unsigned long)&at91sam9x5_caps, + }, { + /* terminator */ + } +}; +MODULE_DEVICE_TABLE(platform, at91_adc_ids); static struct platform_driver at91_adc_driver = { .probe = at91_adc_probe, .remove = at91_adc_remove, + .id_table = at91_adc_ids, .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(at91_adc_dt_ids), diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c index d25b262193a7..affa93f51789 100644 --- a/drivers/iio/adc/exynos_adc.c +++ b/drivers/iio/adc/exynos_adc.c @@ -344,7 +344,7 @@ static int exynos_adc_probe(struct platform_device *pdev) exynos_adc_hw_init(info); - ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev); + ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev); if (ret < 0) { dev_err(&pdev->dev, "failed adding child nodes\n"); goto err_of_populate; @@ -353,7 +353,7 @@ static int exynos_adc_probe(struct platform_device *pdev) return 0; err_of_populate: - device_for_each_child(&pdev->dev, NULL, + device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); regulator_disable(info->vdd); clk_disable_unprepare(info->clk); @@ -369,7 +369,7 @@ static int exynos_adc_remove(struct platform_device *pdev) struct iio_dev *indio_dev = platform_get_drvdata(pdev); struct exynos_adc *info = iio_priv(indio_dev); - device_for_each_child(&pdev->dev, NULL, + device_for_each_child(&indio_dev->dev, NULL, exynos_adc_remove_devices); regulator_disable(info->vdd); clk_disable_unprepare(info->clk); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index cb9f96b446a5..d8ad606c7cd0 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -660,6 +660,7 @@ static int inv_mpu_probe(struct i2c_client *client, { struct inv_mpu6050_state *st; struct iio_dev *indio_dev; + struct inv_mpu6050_platform_data *pdata; int result; if (!i2c_check_functionality(client->adapter, @@ -672,8 +673,10 @@ static int inv_mpu_probe(struct i2c_client *client, st = iio_priv(indio_dev); st->client = client; - st->plat_data = *(struct inv_mpu6050_platform_data - *)dev_get_platdata(&client->dev); + pdata = (struct inv_mpu6050_platform_data + *)dev_get_platdata(&client->dev); + if (pdata) + st->plat_data = *pdata; /* power is turned on inside check chip type*/ result = inv_check_and_setup_chip(st, id); if (result) diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c index e108f2a9d827..e472cff6eeae 100644 --- a/drivers/iio/industrialio-buffer.c +++ b/drivers/iio/industrialio-buffer.c @@ -165,7 +165,8 @@ static ssize_t iio_scan_el_show(struct device *dev, int ret; struct iio_dev *indio_dev = dev_to_iio_dev(dev); - ret = test_bit(to_iio_dev_attr(attr)->address, + /* Ensure ret is 0 or 1. */ + ret = !!test_bit(to_iio_dev_attr(attr)->address, indio_dev->buffer->scan_mask); return sprintf(buf, "%d\n", ret); @@ -862,7 +863,8 @@ int iio_scan_mask_query(struct iio_dev *indio_dev, if (!buffer->scan_mask) return 0; - return test_bit(bit, buffer->scan_mask); + /* Ensure return value is 0 or 1. */ + return !!test_bit(bit, buffer->scan_mask); }; EXPORT_SYMBOL_GPL(iio_scan_mask_query); diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c index 47a6dbac2d0c..d976e6ce60db 100644 --- a/drivers/iio/light/cm32181.c +++ b/drivers/iio/light/cm32181.c @@ -221,6 +221,7 @@ static int cm32181_read_raw(struct iio_dev *indio_dev, *val = cm32181->calibscale; return IIO_VAL_INT; case IIO_CHAN_INFO_INT_TIME: + *val = 0; ret = cm32181_read_als_it(cm32181, val2); return ret; } diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c index a45e07492db3..39fc67e82138 100644 --- a/drivers/iio/light/cm36651.c +++ b/drivers/iio/light/cm36651.c @@ -652,7 +652,19 @@ static int cm36651_probe(struct i2c_client *client, cm36651->client = client; cm36651->ps_client = i2c_new_dummy(client->adapter, CM36651_I2C_ADDR_PS); + if (!cm36651->ps_client) { + dev_err(&client->dev, "%s: new i2c device failed\n", __func__); + ret = -ENODEV; + goto error_disable_reg; + } + cm36651->ara_client = i2c_new_dummy(client->adapter, CM36651_ARA); + if (!cm36651->ara_client) { + dev_err(&client->dev, "%s: new i2c device failed\n", __func__); + ret = -ENODEV; + goto error_i2c_unregister_ps; + } + mutex_init(&cm36651->lock); indio_dev->dev.parent = &client->dev; indio_dev->channels = cm36651_channels; @@ -664,7 +676,7 @@ static int cm36651_probe(struct i2c_client *client, ret = cm36651_setup_reg(cm36651); if (ret) { dev_err(&client->dev, "%s: register setup failed\n", __func__); - goto error_disable_reg; + goto error_i2c_unregister_ara; } ret = request_threaded_irq(client->irq, NULL, cm36651_irq_handler, @@ -672,7 +684,7 @@ static int cm36651_probe(struct i2c_client *client, "cm36651", indio_dev); if (ret) { dev_err(&client->dev, "%s: request irq failed\n", __func__); - goto error_disable_reg; + goto error_i2c_unregister_ara; } ret = iio_device_register(indio_dev); @@ -685,6 +697,10 @@ static int cm36651_probe(struct i2c_client *client, error_free_irq: free_irq(client->irq, indio_dev); +error_i2c_unregister_ara: + i2c_unregister_device(cm36651->ara_client); +error_i2c_unregister_ps: + i2c_unregister_device(cm36651->ps_client); error_disable_reg: regulator_disable(cm36651->vled_reg); return ret; @@ -698,6 +714,8 @@ static int cm36651_remove(struct i2c_client *client) iio_device_unregister(indio_dev); regulator_disable(cm36651->vled_reg); free_irq(client->irq, indio_dev); + i2c_unregister_device(cm36651->ps_client); + i2c_unregister_device(cm36651->ara_client); return 0; } |