diff options
Diffstat (limited to 'drivers/infiniband/hw/amso1100/c2.c')
| -rw-r--r-- | drivers/infiniband/hw/amso1100/c2.c | 1255 |
1 files changed, 1255 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/amso1100/c2.c b/drivers/infiniband/hw/amso1100/c2.c new file mode 100644 index 000000000000..9e9120f36019 --- /dev/null +++ b/drivers/infiniband/hw/amso1100/c2.c @@ -0,0 +1,1255 @@ +/* + * Copyright (c) 2005 Ammasso, Inc. All rights reserved. + * Copyright (c) 2005 Open Grid Computing, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/inetdevice.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/if_vlan.h> +#include <linux/crc32.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/byteorder.h> + +#include <rdma/ib_smi.h> +#include "c2.h" +#include "c2_provider.h" + +MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>"); +MODULE_DESCRIPTION("Ammasso AMSO1100 Low-level iWARP Driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION); + +static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK + | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN; + +static int debug = -1; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +static int c2_up(struct net_device *netdev); +static int c2_down(struct net_device *netdev); +static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev); +static void c2_tx_interrupt(struct net_device *netdev); +static void c2_rx_interrupt(struct net_device *netdev); +static irqreturn_t c2_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static void c2_tx_timeout(struct net_device *netdev); +static int c2_change_mtu(struct net_device *netdev, int new_mtu); +static void c2_reset(struct c2_port *c2_port); +static struct net_device_stats *c2_get_stats(struct net_device *netdev); + +static struct pci_device_id c2_pci_table[] = { + { PCI_DEVICE(0x18b8, 0xb001) }, + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, c2_pci_table); + +static void c2_print_macaddr(struct net_device *netdev) +{ + pr_debug("%s: MAC %02X:%02X:%02X:%02X:%02X:%02X, " + "IRQ %u\n", netdev->name, + netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2], + netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5], + netdev->irq); +} + +static void c2_set_rxbufsize(struct c2_port *c2_port) +{ + struct net_device *netdev = c2_port->netdev; + + if (netdev->mtu > RX_BUF_SIZE) + c2_port->rx_buf_size = + netdev->mtu + ETH_HLEN + sizeof(struct c2_rxp_hdr) + + NET_IP_ALIGN; + else + c2_port->rx_buf_size = sizeof(struct c2_rxp_hdr) + RX_BUF_SIZE; +} + +/* + * Allocate TX ring elements and chain them together. + * One-to-one association of adapter descriptors with ring elements. + */ +static int c2_tx_ring_alloc(struct c2_ring *tx_ring, void *vaddr, + dma_addr_t base, void __iomem * mmio_txp_ring) +{ + struct c2_tx_desc *tx_desc; + struct c2_txp_desc __iomem *txp_desc; + struct c2_element *elem; + int i; + + tx_ring->start = kmalloc(sizeof(*elem) * tx_ring->count, GFP_KERNEL); + if (!tx_ring->start) + return -ENOMEM; + + elem = tx_ring->start; + tx_desc = vaddr; + txp_desc = mmio_txp_ring; + for (i = 0; i < tx_ring->count; i++, elem++, tx_desc++, txp_desc++) { + tx_desc->len = 0; + tx_desc->status = 0; + + /* Set TXP_HTXD_UNINIT */ + __raw_writeq(cpu_to_be64(0x1122334455667788ULL), + (void __iomem *) txp_desc + C2_TXP_ADDR); + __raw_writew(0, (void __iomem *) txp_desc + C2_TXP_LEN); + __raw_writew(cpu_to_be16(TXP_HTXD_UNINIT), + (void __iomem *) txp_desc + C2_TXP_FLAGS); + + elem->skb = NULL; + elem->ht_desc = tx_desc; + elem->hw_desc = txp_desc; + + if (i == tx_ring->count - 1) { + elem->next = tx_ring->start; + tx_desc->next_offset = base; + } else { + elem->next = elem + 1; + tx_desc->next_offset = + base + (i + 1) * sizeof(*tx_desc); + } + } + + tx_ring->to_use = tx_ring->to_clean = tx_ring->start; + + return 0; +} + +/* + * Allocate RX ring elements and chain them together. + * One-to-one association of adapter descriptors with ring elements. + */ +static int c2_rx_ring_alloc(struct c2_ring *rx_ring, void *vaddr, + dma_addr_t base, void __iomem * mmio_rxp_ring) +{ + struct c2_rx_desc *rx_desc; + struct c2_rxp_desc __iomem *rxp_desc; + struct c2_element *elem; + int i; + + rx_ring->start = kmalloc(sizeof(*elem) * rx_ring->count, GFP_KERNEL); + if (!rx_ring->start) + return -ENOMEM; + + elem = rx_ring->start; + rx_desc = vaddr; + rxp_desc = mmio_rxp_ring; + for (i = 0; i < rx_ring->count; i++, elem++, rx_desc++, rxp_desc++) { + rx_desc->len = 0; + rx_desc->status = 0; + + /* Set RXP_HRXD_UNINIT */ + __raw_writew(cpu_to_be16(RXP_HRXD_OK), + (void __iomem *) rxp_desc + C2_RXP_STATUS); + __raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_COUNT); + __raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_LEN); + __raw_writeq(cpu_to_be64(0x99aabbccddeeffULL), + (void __iomem *) rxp_desc + C2_RXP_ADDR); + __raw_writew(cpu_to_be16(RXP_HRXD_UNINIT), + (void __iomem *) rxp_desc + C2_RXP_FLAGS); + + elem->skb = NULL; + elem->ht_desc = rx_desc; + elem->hw_desc = rxp_desc; + + if (i == rx_ring->count - 1) { + elem->next = rx_ring->start; + rx_desc->next_offset = base; + } else { + elem->next = elem + 1; + rx_desc->next_offset = + base + (i + 1) * sizeof(*rx_desc); + } + } + + rx_ring->to_use = rx_ring->to_clean = rx_ring->start; + + return 0; +} + +/* Setup buffer for receiving */ +static inline int c2_rx_alloc(struct c2_port *c2_port, struct c2_element *elem) +{ + struct c2_dev *c2dev = c2_port->c2dev; + struct c2_rx_desc *rx_desc = elem->ht_desc; + struct sk_buff *skb; + dma_addr_t mapaddr; + u32 maplen; + struct c2_rxp_hdr *rxp_hdr; + + skb = dev_alloc_skb(c2_port->rx_buf_size); + if (unlikely(!skb)) { + pr_debug("%s: out of memory for receive\n", + c2_port->netdev->name); + return -ENOMEM; + } + + /* Zero out the rxp hdr in the sk_buff */ + memset(skb->data, 0, sizeof(*rxp_hdr)); + + skb->dev = c2_port->netdev; + + maplen = c2_port->rx_buf_size; + mapaddr = + pci_map_single(c2dev->pcidev, skb->data, maplen, + PCI_DMA_FROMDEVICE); + + /* Set the sk_buff RXP_header to RXP_HRXD_READY */ + rxp_hdr = (struct c2_rxp_hdr *) skb->data; + rxp_hdr->flags = RXP_HRXD_READY; + + __raw_writew(0, elem->hw_desc + C2_RXP_STATUS); + __raw_writew(cpu_to_be16((u16) maplen - sizeof(*rxp_hdr)), + elem->hw_desc + C2_RXP_LEN); + __raw_writeq(cpu_to_be64(mapaddr), elem->hw_desc + C2_RXP_ADDR); + __raw_writew(cpu_to_be16(RXP_HRXD_READY), elem->hw_desc + C2_RXP_FLAGS); + + elem->skb = skb; + elem->mapaddr = mapaddr; + elem->maplen = maplen; + rx_desc->len = maplen; + + return 0; +} + +/* + * Allocate buffers for the Rx ring + * For receive: rx_ring.to_clean is next received frame + */ +static int c2_rx_fill(struct c2_port *c2_port) +{ + struct c2_ring *rx_ring = &c2_port->rx_ring; + struct c2_element *elem; + int ret = 0; + + elem = rx_ring->start; + do { + if (c2_rx_alloc(c2_port, elem)) { + ret = 1; + break; + } + } while ((elem = elem->next) != rx_ring->start); + + rx_ring->to_clean = rx_ring->start; + return ret; +} + +/* Free all buffers in RX ring, assumes receiver stopped */ +static void c2_rx_clean(struct c2_port *c2_port) +{ + struct c2_dev *c2dev = c2_port->c2dev; + struct c2_ring *rx_ring = &c2_port->rx_ring; + struct c2_element *elem; + struct c2_rx_desc *rx_desc; + + elem = rx_ring->start; + do { + rx_desc = elem->ht_desc; + rx_desc->len = 0; + + __raw_writew(0, elem->hw_desc + C2_RXP_STATUS); + __raw_writew(0, elem->hw_desc + C2_RXP_COUNT); + __raw_writew(0, elem->hw_desc + C2_RXP_LEN); + __raw_writeq(cpu_to_be64(0x99aabbccddeeffULL), + elem->hw_desc + C2_RXP_ADDR); + __raw_writew(cpu_to_be16(RXP_HRXD_UNINIT), + elem->hw_desc + C2_RXP_FLAGS); + + if (elem->skb) { + pci_unmap_single(c2dev->pcidev, elem->mapaddr, + elem->maplen, PCI_DMA_FROMDEVICE); + dev_kfree_skb(elem->skb); + elem->skb = NULL; + } + } while ((elem = elem->next) != rx_ring->start); +} + +static inline int c2_tx_free(struct c2_dev *c2dev, struct c2_element *elem) +{ + struct c2_tx_desc *tx_desc = elem->ht_desc; + + tx_desc->len = 0; + + pci_unmap_single(c2dev->pcidev, elem->mapaddr, elem->maplen, + PCI_DMA_TODEVICE); + + if (elem->skb) { + dev_kfree_skb_any(elem->skb); + elem->skb = NULL; + } + + return 0; +} + +/* Free all buffers in TX ring, assumes transmitter stopped */ +static void c2_tx_clean(struct c2_port *c2_port) +{ + struct c2_ring *tx_ring = &c2_port->tx_ring; + struct c2_element *elem; + struct c2_txp_desc txp_htxd; + int retry; + unsigned long flags; + + spin_lock_irqsave(&c2_port->tx_lock, flags); + + elem = tx_ring->start; + + do { + retry = 0; + do { + txp_htxd.flags = + readw(elem->hw_desc + C2_TXP_FLAGS); + + if (txp_htxd.flags == TXP_HTXD_READY) { + retry = 1; + __raw_writew(0, + elem->hw_desc + C2_TXP_LEN); + __raw_writeq(0, + elem->hw_desc + C2_TXP_ADDR); + __raw_writew(cpu_to_be16(TXP_HTXD_DONE), + elem->hw_desc + C2_TXP_FLAGS); + c2_port->netstats.tx_dropped++; + break; + } else { + __raw_writew(0, + elem->hw_desc + C2_TXP_LEN); + __raw_writeq(cpu_to_be64(0x1122334455667788ULL), + elem->hw_desc + C2_TXP_ADDR); + __raw_writew(cpu_to_be16(TXP_HTXD_UNINIT), + elem->hw_desc + C2_TXP_FLAGS); + } + + c2_tx_free(c2_port->c2dev, elem); + + } while ((elem = elem->next) != tx_ring->start); + } while (retry); + + c2_port->tx_avail = c2_port->tx_ring.count - 1; + c2_port->c2dev->cur_tx = tx_ring->to_use - tx_ring->start; + + if (c2_port->tx_avail > MAX_SKB_FRAGS + 1) + netif_wake_queue(c2_port->netdev); + + spin_unlock_irqrestore(&c2_port->tx_lock, flags); +} + +/* + * Process transmit descriptors marked 'DONE' by the firmware, + * freeing up their unneeded sk_buffs. + */ +static void c2_tx_interrupt(struct net_device *netdev) +{ + struct c2_port *c2_port = netdev_priv(netdev); + struct c2_dev *c2dev = c2_port->c2dev; + struct c2_ring *tx_ring = &c2_port->tx_ring; + struct c2_element *elem; + struct c2_txp_desc txp_htxd; + + spin_lock(&c2_port->tx_lock); + + for (elem = tx_ring->to_clean; elem != tx_ring->to_use; + elem = elem->next) { + txp_htxd.flags = + be16_to_cpu(readw(elem->hw_desc + C2_TXP_FLAGS)); + + if (txp_htxd.flags != TXP_HTXD_DONE) + break; + + if (netif_msg_tx_done(c2_port)) { + /* PCI reads are expensive in fast path */ + txp_htxd.len = + be16_to_cpu(readw(elem->hw_desc + C2_TXP_LEN)); + pr_debug("%s: tx done slot %3Zu status 0x%x len " + "%5u bytes\n", + netdev->name, elem - tx_ring->start, + txp_htxd.flags, txp_htxd.len); + } + + c2_tx_free(c2dev, elem); + ++(c2_port->tx_avail); + } + + tx_ring->to_clean = elem; + + if (netif_queue_stopped(netdev) + && c2_port->tx_avail > MAX_SKB_FRAGS + 1) + netif_wake_queue(netdev); + + spin_unlock(&c2_port->tx_lock); +} + +static void c2_rx_error(struct c2_port *c2_port, struct c2_element *elem) +{ + struct c2_rx_desc *rx_desc = elem->ht_desc; + struct c2_rxp_hdr *rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data; + + if (rxp_hdr->status != RXP_HRXD_OK || + rxp_hdr->len > (rx_desc->len - sizeof(*rxp_hdr))) { + pr_debug("BAD RXP_HRXD\n"); + pr_debug(" rx_desc : %p\n", rx_desc); + pr_debug(" index : %Zu\n", + elem - c2_port->rx_ring.start); + pr_debug(" len : %u\n", rx_desc->len); + pr_debug(" rxp_hdr : %p [PA %p]\n", rxp_hdr, + (void *) __pa((unsigned long) rxp_hdr)); + pr_debug(" flags : 0x%x\n", rxp_hdr->flags); + pr_debug(" status: 0x%x\n", rxp_hdr->status); + pr_debug(" len : %u\n", rxp_hdr->len); + pr_debug(" rsvd : 0x%x\n", rxp_hdr->rsvd); + } + + /* Setup the skb for reuse since we're dropping this pkt */ + elem->skb->tail = elem->skb->data = elem->skb->head; + + /* Zero out the rxp hdr in the sk_buff */ + memset(elem->skb->data, 0, sizeof(*rxp_hdr)); + + /* Write the descriptor to the adapter's rx ring */ + __raw_writew(0, elem->hw_desc + C2_RXP_STATUS); + __raw_writew(0, elem->hw_desc + C2_RXP_COUNT); + __raw_writew(cpu_to_be16((u16) elem->maplen - sizeof(*rxp_hdr)), + elem->hw_desc + C2_RXP_LEN); + __raw_writeq(cpu_to_be64(elem->mapaddr), elem->hw_desc + C2_RXP_ADDR); + __raw_writew(cpu_to_be16(RXP_HRXD_READY), elem->hw_desc + C2_RXP_FLAGS); + + pr_debug("packet dropped\n"); + c2_port->netstats.rx_dropped++; +} + +static void c2_rx_interrupt(struct net_device *netdev) +{ + struct c2_port *c2_port = netdev_priv(netdev); + struct c2_dev *c2dev = c2_port->c2dev; + struct c2_ring *rx_ring = &c2_port->rx_ring; + struct c2_element *elem; + struct c2_rx_desc *rx_desc; + struct c2_rxp_hdr *rxp_hdr; + struct sk_buff *skb; + dma_addr_t mapaddr; + u32 maplen, buflen; + unsigned long flags; + + spin_lock_irqsave(&c2dev->lock, flags); + + /* Begin where we left off */ + rx_ring->to_clean = rx_ring->start + c2dev->cur_rx; + + for (elem = rx_ring->to_clean; elem->next != rx_ring->to_clean; + elem = elem->next) { + rx_desc = elem->ht_desc; + mapaddr = elem->mapaddr; + maplen = elem->maplen; + skb = elem->skb; + rxp_hdr = (struct c2_rxp_hdr *) skb->data; + + if (rxp_hdr->flags != RXP_HRXD_DONE) + break; + buflen = rxp_hdr->len; + + /* Sanity check the RXP header */ + if (rxp_hdr->status != RXP_HRXD_OK || + buflen > (rx_desc->len - sizeof(*rxp_hdr))) { + c2_rx_error(c2_port, elem); + continue; + } + + /* + * Allocate and map a new skb for replenishing the host + * RX desc + */ + if (c2_rx_alloc(c2_port, elem)) { + c2_rx_error(c2_port, elem); + continue; + } + + /* Unmap the old skb */ + pci_unmap_single(c2dev->pcidev, mapaddr, maplen, + PCI_DMA_FROMDEVICE); + + prefetch(skb->data); + + /* + * Skip past the leading 8 bytes comprising of the + * "struct c2_rxp_hdr", prepended by the adapter + * to the usual Ethernet header ("struct ethhdr"), + * to the start of the raw Ethernet packet. + * + * Fix up the various fields in the sk_buff before + * passing it up to netif_rx(). The transfer size + * (in bytes) specified by the adapter len field of + * the "struct rxp_hdr_t" does NOT include the + * "sizeof(struct c2_rxp_hdr)". + */ + skb->data += sizeof(*rxp_hdr); + skb->tail = skb->data + buflen; + skb->len = buflen; + skb->dev = netdev; + skb->protocol = eth_type_trans(skb, netdev); + + netif_rx(skb); + + netdev->last_rx = jiffies; + c2_port->netstats.rx_packets++; + c2_port->netstats.rx_bytes += buflen; + } + + /* Save where we left off */ + rx_ring->to_clean = elem; + c2dev->cur_rx = elem - rx_ring->start; + C2_SET_CUR_RX(c2dev, c2dev->cur_rx); + + spin_unlock_irqrestore(&c2dev->lock, flags); +} + +/* + * Handle netisr0 TX & RX interrupts. + */ +static irqreturn_t c2_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned int netisr0, dmaisr; + int handled = 0; + struct c2_dev *c2dev = (struct c2_dev *) dev_id; + + /* Process CCILNET interrupts */ + netisr0 = readl(c2dev->regs + C2_NISR0); + if (netisr0) { + + /* + * There is an issue with the firmware that always + * provides the status of RX for both TX & RX + * interrupts. So process both queues here. + */ + c2_rx_interrupt(c2dev->netdev); + c2_tx_interrupt(c2dev->netdev); + + /* Clear the interrupt */ + writel(netisr0, c2dev->regs + C2_NISR0); + handled++; + } + + /* Process RNIC interrupts */ + dmaisr = readl(c2dev->regs + C2_DISR); + if (dmaisr) { + writel(dmaisr, c2dev->regs + C2_DISR); + c2_rnic_interrupt(c2dev); + handled++; + } + + if (handled) { + return IRQ_HANDLED; + } else { + return IRQ_NONE; + } +} + +static int c2_up(struct net_device *netdev) +{ + struct c2_port *c2_port = netdev_priv(netdev); + struct c2_dev *c2dev = c2_port->c2dev; + struct c2_element *elem; + struct c2_rxp_hdr *rxp_hdr; + struct in_device *in_dev; + size_t rx_size, tx_size; + int ret, i; + unsigned int netimr0; + + if (netif_msg_ifup(c2_port)) + pr_debug("%s: enabling interface\n", netdev->name); + + /* Set the Rx buffer size based on MTU */ + c2_set_rxbufsize(c2_port); + + /* Allocate DMA'able memory for Tx/Rx host descriptor rings */ + rx_size = c2_port->rx_ring.count * sizeof(struct c2_rx_desc); + tx_size = c2_port->tx_ring.count * sizeof(struct c2_tx_desc); + + c2_port->mem_size = tx_size + rx_size; + c2_port->mem = pci_alloc_consistent(c2dev->pcidev, c2_port->mem_size, + &c2_port->dma); + if (c2_port->mem == NULL) { + pr_debug("Unable to allocate memory for " + "host descriptor rings\n"); + return -ENOMEM; + } + + memset(c2_port->mem, 0, c2_port->mem_size); + + /* Create the Rx host descriptor ring */ + if ((ret = + c2_rx_ring_alloc(&c2_port->rx_ring, c2_port->mem, c2_port->dma, + c2dev->mmio_rxp_ring))) { + pr_debug("Unable to create RX ring\n"); + goto bail0; + } + + /* Allocate Rx buffers for the host descriptor ring */ + if (c2_rx_fill(c2_port)) { + pr_debug("Unable to fill RX ring\n"); + goto bail1; + } + + /* Create the Tx host descriptor ring */ + if ((ret = c2_tx_ring_alloc(&c2_port->tx_ring, c2_port->mem + rx_size, + c2_port->dma + rx_size, + c2dev->mmio_txp_ring))) { + pr_debug("Unable to create TX ring\n"); + goto bail1; + } + + /* Set the TX pointer to where we left off */ + c2_port->tx_avail = c2_port->tx_ring.count - 1; + c2_port->tx_ring.to_use = c2_port->tx_ring.to_clean = + c2_port->tx_ring.start + c2dev->cur_tx; + + /* missing: Initialize MAC */ + + BUG_ON(c2_port->tx_ring.to_use != c2_port->tx_ring.to_clean); + + /* Reset the adapter, ensures the driver is in sync with the RXP */ + c2_reset(c2_port); + + /* Reset the READY bit in the sk_buff RXP headers & adapter HRXDQ */ + for (i = 0, elem = c2_port->rx_ring.start; i < c2_port->rx_ring.count; + i++, elem++) { + rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data; + rxp_hdr->flags = 0; + __raw_writew(cpu_to_be16(RXP_HRXD_READY), + elem->hw_desc + C2_RXP_FLAGS); + } + + /* Enable network packets */ + netif_start_queue(netdev); + + /* Enable IRQ */ + writel(0, c2dev->regs + C2_IDIS); + netimr0 = readl(c2dev->regs + C2_NIMR0); + netimr0 &= ~(C2_PCI_HTX_INT | C2_PCI_HRX_INT); + writel(netimr0, c2dev->regs + C2_NIMR0); + + /* Tell the stack to ignore arp requests for ipaddrs bound to + * other interfaces. This is needed to prevent the host stack + * from responding to arp requests to the ipaddr bound on the + * rdma interface. + */ + in_dev = in_dev_get(netdev); + in_dev->cnf.arp_ignore = 1; + in_dev_put(in_dev); + + return 0; + + bail1: + c2_rx_clean(c2_port); + kfree(c2_port->rx_ring.start); + + bail0: + pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem, + c2_port->dma); + + return ret; +} + +static int c2_down(struct net_device *netdev) +{ + struct c2_port *c2_port = netdev_priv(netdev); + struct c2_dev *c2dev = c2_port->c2dev; + + if (netif_msg_ifdown(c2_port)) + pr_debug("%s: disabling interface\n", + netdev->name); + + /* Wait for all the queued packets to get sent */ + c2_tx_interrupt(netdev); + + /* Disable network packets */ + netif_stop_queue(netdev); + + /* Disable IRQs by clearing the interrupt mask */ + writel(1, c2dev->regs + C2_IDIS); + writel(0, c2dev->regs + C2_NIMR0); + + /* missing: Stop transmitter */ + + /* missing: Stop receiver */ + + /* Reset the adapter, ensures the driver is in sync with the RXP */ + c2_reset(c2_port); + + /* missing: Turn off LEDs here */ + + /* Free all buffers in the host descriptor rings */ + c2_tx_clean(c2_port); + c2_rx_clean(c2_port); + + /* Free the host descriptor rings */ + kfree(c2_port->rx_ring.start); + kfree(c2_port->tx_ring.start); + pci_free_consistent(c2dev->pcidev, c2_port->mem_size, c2_port->mem, + c2_port->dma); + + return 0; +} + +static void c2_reset(struct c2_port *c2_port) +{ + struct c2_dev *c2dev = c2_port->c2dev; + unsigned int cur_rx = c2dev->cur_rx; + + /* Tell the hardware to quiesce */ + C2_SET_CUR_RX(c2dev, cur_rx | C2_PCI_HRX_QUI); + + /* + * The hardware will reset the C2_PCI_HRX_QUI bit once + * the RXP is quiesced. Wait 2 seconds for this. + */ + ssleep(2); + + cur_rx = C2_GET_CUR_RX(c2dev); + + if (cur_rx & C2_PCI_HRX_QUI) + pr_debug("c2_reset: failed to quiesce the hardware!\n"); + + cur_rx &= ~C2_PCI_HRX_QUI; + + c2dev->cur_rx = cur_rx; + + pr_debug("Current RX: %u\n", c2dev->cur_rx); +} + +static int c2_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct c2_port *c2_port = netdev_priv(netdev); + struct c2_dev *c2dev = c2_port->c2dev; + struct c2_ring *tx_ring = &c2_port->tx_ring; + struct c2_element *elem; + dma_addr_t mapaddr; + u32 maplen; + unsigned long flags; + unsigned int i; + + spin_lock_irqsave(&c2_port->tx_lock, flags); + + if (unlikely(c2_port->tx_avail < (skb_shinfo(skb)->nr_frags + 1))) { + netif_stop_queue(netdev); + spin_unlock_irqrestore(&c2_port->tx_lock, flags); + + pr_debug("%s: Tx ring full when queue awake!\n", + netdev->name); + return NETDEV_TX_BUSY; + } + + maplen = skb_headlen(skb); + mapaddr = + pci_map_single(c2dev->pcidev, skb->data, maplen, PCI_DMA_TODEVICE); + + elem = tx_ring->to_use; + elem->skb = skb; + elem->mapaddr = mapaddr; + elem->maplen = maplen; + + /* Tell HW to xmit */ + __raw_writeq(cpu_to_be64(mapaddr), elem->hw_desc + C2_TXP_ADDR); + __raw_writew(cpu_to_be16(maplen), elem->hw_desc + C2_TXP_LEN); + __raw_writew(cpu_to_be16(TXP_HTXD_READY), elem->hw_desc + C2_TXP_FLAGS); + + c2_port->netstats.tx_packets++; + c2_port->netstats.tx_bytes += maplen; + + /* Loop thru additional data fragments and queue them */ + if (skb_shinfo(skb)->nr_frags) { + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + maplen = frag->size; + mapaddr = + pci_map_page(c2dev->pcidev, frag->page, + frag->page_offset, maplen, + PCI_DMA_TODEVICE); + + elem = elem->next; + elem->skb = NULL; + elem->mapaddr = mapaddr; + elem->maplen = maplen; + + /* Tell HW to xmit */ + __raw_writeq(cpu_to_be64(mapaddr), + elem->hw_desc + C2_TXP_ADDR); + __raw_writew(cpu_to_be16(maplen), + elem->hw_desc + C2_TXP_LEN); + __raw_writew(cpu_to_be16(TXP_HTXD_READY), + elem->hw_desc + C2_TXP_FLAGS); + + c2_port->netstats.tx_packets++; + c2_port->netstats.tx_bytes += maplen; + } + } + + tx_ring->to_use = elem->next; + c2_port->tx_avail -= (skb_shinfo(skb)->nr_frags + 1); + + if (c2_port->tx_avail <= MAX_SKB_FRAGS + 1) { + netif_stop_queue(netdev); + if (netif_msg_tx_queued(c2_port)) + pr_debug("%s: transmit queue full\n", + netdev->name); + } + + spin_unlock_irqrestore(&c2_port->tx_lock, flags); + + netdev->trans_start = jiffies; + + return NETDEV_TX_OK; +} + +static struct net_device_stats *c2_get_stats(struct net_device *netdev) +{ + struct c2_port *c2_port = netdev_priv(netdev); + + return &c2_port->netstats; +} + +static void c2_tx_timeout(struct net_device *netdev) +{ + struct c2_port *c2_port = netdev_priv(netdev); + + if (netif_msg_timer(c2_port)) + pr_debug("%s: tx timeout\n", netdev->name); + + c2_tx_clean(c2_port); +} + +static int c2_change_mtu(struct net_device *netdev, int new_mtu) +{ + int ret = 0; + + if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) + return -EINVAL; + + netdev->mtu = new_mtu; + + if (netif_running(netdev)) { + c2_down(netdev); + + c2_up(netdev); + } + + return ret; +} + +/* Initialize network device */ +static struct net_device *c2_devinit(struct c2_dev *c2dev, + void __iomem * mmio_addr) +{ + struct c2_port *c2_port = NULL; + struct net_device *netdev = alloc_etherdev(sizeof(*c2_port)); + + if (!netdev) { + pr_debug("c2_port etherdev alloc failed"); + return NULL; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &c2dev->pcidev->dev); + + netdev->open = c2_up; + netdev->stop = c2_down; + netdev->hard_start_xmit = c2_xmit_frame; + netdev->get_stats = c2_get_stats; + netdev->tx_timeout = c2_tx_timeout; + netdev->change_mtu = c2_change_mtu; + netdev->watchdog_timeo = C2_TX_TIMEOUT; + netdev->irq = c2dev->pcidev->irq; + + c2_port = netdev_priv(netdev); + c2_port->netdev = netdev; + c2_port->c2dev = c2dev; + c2_port->msg_enable = netif_msg_init(debug, default_msg); + c2_port->tx_ring.count = C2_NUM_TX_DESC; + c2_port->rx_ring.count = C2_NUM_RX_DESC; + + spin_lock_init(&c2_port->tx_lock); + + /* Copy our 48-bit ethernet hardware address */ + memcpy_fromio(netdev->dev_addr, mmio_addr + C2_REGS_ENADDR, 6); + + /* Validate the MAC address */ + if (!is_valid_ether_addr(netdev->dev_addr)) { + pr_debug("Invalid MAC Address\n"); + c2_print_macaddr(netdev); + free_netdev(netdev); + return NULL; + } + + c2dev->netdev = netdev; + + return netdev; +} + +static int __devinit c2_probe(struct pci_dev *pcidev, + const struct pci_device_id *ent) +{ + int ret = 0, i; + unsigned long reg0_start, reg0_flags, reg0_len; + unsigned long reg2_start, reg2_flags, reg2_len; + unsigned long reg4_start, reg4_flags, reg4_len; + unsigned kva_map_size; + struct net_device *netdev = NULL; + struct c2_dev *c2dev = NULL; + void __iomem *mmio_regs = NULL; + + printk(KERN_INFO PFX "AMSO1100 Gigabit Ethernet driver v%s loaded\n", + DRV_VERSION); + + /* Enable PCI device */ + ret = pci_enable_device(pcidev); + if (ret) { + printk(KERN_ERR PFX "%s: Unable to enable PCI device\n", + pci_name(pcidev)); + goto bail0; + } + + reg0_start = pci_resource_start(pcidev, BAR_0); + reg0_len = pci_resource_len(pcidev, BAR_0); + reg0_flags = pci_resource_flags(pcidev, BAR_0); + + reg2_start = pci_resource_start(pcidev, BAR_2); + reg2_len = pci_resource_len(pcidev, BAR_2); + reg2_flags = pci_resource_flags(pcidev, BAR_2); + + reg4_start = pci_resource_start(pcidev, BAR_4); + reg4_len = pci_resource_len(pcidev, BAR_4); + reg4_flags = pci_resource_flags(pcidev, BAR_4); + + pr_debug("BAR0 size = 0x%lX bytes\n", reg0_len); + pr_debug("BAR2 size = 0x%lX bytes\n", reg2_len); + pr_debug("BAR4 size = 0x%lX bytes\n", reg4_len); + + /* Make sure PCI base addr are MMIO */ + if (!(reg0_flags & IORESOURCE_MEM) || + !(reg2_flags & IORESOURCE_MEM) || !(reg4_flags & IORESOURCE_MEM)) { + printk(KERN_ERR PFX "PCI regions not an MMIO resource\n"); + ret = -ENODEV; + goto bail1; + } + + /* Check for weird/broken PCI region reporting */ + if ((reg0_len < C2_REG0_SIZE) || + (reg2_len < C2_REG2_SIZE) || (reg4_len < C2_REG4_SIZE)) { + printk(KERN_ERR PFX "Invalid PCI region sizes\n"); + ret = -ENODEV; + goto bail1; + } + + /* Reserve PCI I/O and memory resources */ + ret = pci_request_regions(pcidev, DRV_NAME); + if (ret) { + printk(KERN_ERR PFX "%s: Unable to request regions\n", + pci_name(pcidev)); + goto bail1; + } + + if ((sizeof(dma_addr_t) > 4)) { + ret = pci_set_dma_mask(pcidev, DMA_64BIT_MASK); + if (ret < 0) { + printk(KERN_ERR PFX "64b DMA configuration failed\n"); + goto bail2; + } + } else { + ret = pci_set_dma_mask(pcidev, DMA_32BIT_MASK); + if (ret < 0) { + printk(KERN_ERR PFX "32b DMA configuration failed\n"); + goto bail2; + } + } + + /* Enables bus-mastering on the device */ + pci_set_master(pcidev); + + /* Remap the adapter PCI registers in BAR4 */ + mmio_regs = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET, + sizeof(struct c2_adapter_pci_regs)); + if (mmio_regs == 0UL) { + printk(KERN_ERR PFX + "Unable to remap adapter PCI registers in BAR4\n"); + ret = -EIO; + goto bail2; + } + + /* Validate PCI regs magic */ + for (i = 0; i < sizeof(c2_magic); i++) { + if (c2_magic[i] != readb(mmio_regs + C2_REGS_MAGIC + i)) { + printk(KERN_ERR PFX "Downlevel Firmware boot loader " + "[%d/%Zd: got 0x%x, exp 0x%x]. Use the cc_flash " + "utility to update your boot loader\n", + i + 1, sizeof(c2_magic), + readb(mmio_regs + C2_REGS_MAGIC + i), + c2_magic[i]); + printk(KERN_ERR PFX "Adapter not claimed\n"); + iounmap(mmio_regs); + ret = -EIO; + goto bail2; + } + } + + /* Validate the adapter version */ + if (be32_to_cpu(readl(mmio_regs + C2_REGS_VERS)) != C2_VERSION) { + printk(KERN_ERR PFX "Version mismatch " + "[fw=%u, c2=%u], Adapter not claimed\n", + be32_to_cpu(readl(mmio_regs + C2_REGS_VERS)), + C2_VERSION); + ret = -EINVAL; + iounmap(mmio_regs); + goto bail2; + } + + /* Validate the adapter IVN */ + if (be32_to_cpu(readl(mmio_regs + C2_REGS_IVN)) != C2_IVN) { + printk(KERN_ERR PFX "Downlevel FIrmware level. You should be using " + "the OpenIB device support kit. " + "[fw=0x%x, c2=0x%x], Adapter not claimed\n", + be32_to_cpu(readl(mmio_regs + C2_REGS_IVN)), + C2_IVN); + ret = -EINVAL; + iounmap(mmio_regs); + goto bail2; + } + + /* Allocate hardware structure */ + c2dev = (struct c2_dev *) ib_alloc_device(sizeof(*c2dev)); + if (!c2dev) { + printk(KERN_ERR PFX "%s: Unable to alloc hardware struct\n", + pci_name(pcidev)); + ret = -ENOMEM; + iounmap(mmio_regs); + goto bail2; + } + + memset(c2dev, 0, sizeof(*c2dev)); + spin_lock_init(&c2dev->lock); + c2dev->pcidev = pcidev; + c2dev->cur_tx = 0; + + /* Get the last RX index */ + c2dev->cur_rx = + (be32_to_cpu(readl(mmio_regs + C2_REGS_HRX_CUR)) - + 0xffffc000) / sizeof(struct c2_rxp_desc); + + /* Request an interrupt line for the driver */ + ret = request_irq(pcidev->irq, c2_interrupt, SA_SHIRQ, DRV_NAME, c2dev); + if (ret) { + printk(KERN_ERR PFX "%s: requested IRQ %u is busy\n", + pci_name(pcidev), pcidev->irq); + iounmap(mmio_regs); + goto bail3; + } + + /* Set driver specific data */ + pci_set_drvdata(pcidev, c2dev); + + /* Initialize network device */ + if ((netdev = c2_devinit(c2dev, mmio_regs)) == NULL) { + iounmap(mmio_regs); + goto bail4; + } + + /* Save off the actual size prior to unmapping mmio_regs */ + kva_map_size = be32_to_cpu(readl(mmio_regs + C2_REGS_PCI_WINSIZE)); + + /* Unmap the adapter PCI registers in BAR4 */ + iounmap(mmio_regs); + + /* Register network device */ + ret = register_netdev(netdev); + if (ret) { + printk(KERN_ERR PFX "Unable to register netdev, ret = %d\n", + ret); + goto bail5; + } + + /* Disable network packets */ + netif_stop_queue(netdev); + + /* Remap the adapter HRXDQ PA space to kernel VA space */ + c2dev->mmio_rxp_ring = ioremap_nocache(reg4_start + C2_RXP_HRXDQ_OFFSET, + C2_RXP_HRXDQ_SIZE); + if (c2dev->mmio_rxp_ring == 0UL) { + printk(KERN_ERR PFX "Unable to remap MMIO HRXDQ region\n"); + ret = -EIO; + goto bail6; + } + + /* Remap the adapter HTXDQ PA space to kernel VA space */ + c2dev->mmio_txp_ring = ioremap_nocache(reg4_start + C2_TXP_HTXDQ_OFFSET, + C2_TXP_HTXDQ_SIZE); + if (c2dev->mmio_txp_ring == 0UL) { + printk(KERN_ERR PFX "Unable to remap MMIO HTXDQ region\n"); + ret = -EIO; + goto bail7; + } + + /* Save off the current RX index in the last 4 bytes of the TXP Ring */ + C2_SET_CUR_RX(c2dev, c2dev->cur_rx); + + /* Remap the PCI registers in adapter BAR0 to kernel VA space */ + c2dev->regs = ioremap_nocache(reg0_start, reg0_len); + if (c2dev->regs == 0UL) { + printk(KERN_ERR PFX "Unable to remap BAR0\n"); + ret = -EIO; + goto bail8; + } + + /* Remap the PCI registers in adapter BAR4 to kernel VA space */ + c2dev->pa = reg4_start + C2_PCI_REGS_OFFSET; + c2dev->kva = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET, + kva_map_size); + if (c2dev->kva == 0UL) { + printk(KERN_ERR PFX "Unable to remap BAR4\n"); + ret = -EIO; + goto bail9; + } + + /* Print out the MAC address */ + c2_print_macaddr(netdev); + + ret = c2_rnic_init(c2dev); + if (ret) { + printk(KERN_ERR PFX "c2_rnic_init failed: %d\n", ret); + goto bail10; + } + + c2_register_device(c2dev); + + return 0; + + bail10: + iounmap(c2dev->kva); + + bail9: + iounmap(c2dev->regs); + + bail8: + iounmap(c2dev->mmio_txp_ring); + + bail7: + iounmap(c2dev->mmio_rxp_ring); + + bail6: + unregister_netdev(netdev); + + bail5: + free_netdev(netdev); + + bail4: + free_irq(pcidev->irq, c2dev); + + bail3: + ib_dealloc_device(&c2dev->ibdev); + + bail2: + pci_release_regions(pcidev); + + bail1: + pci_disable_device(pcidev); + + bail0: + return ret; +} + +static void __devexit c2_remove(struct pci_dev *pcidev) +{ + struct c2_dev *c2dev = pci_get_drvdata(pcidev); + struct net_device *netdev = c2dev->netdev; + + /* Unregister with OpenIB */ + c2_unregister_device(c2dev); + + /* Clean up the RNIC resources */ + c2_rnic_term(c2dev); + + /* Remove network device from the kernel */ + unregister_netdev(netdev); + + /* Free network device */ + free_netdev(netdev); + + /* Free the interrupt line */ + free_irq(pcidev->irq, c2dev); + + /* missing: Turn LEDs off here */ + + /* Unmap adapter PA space */ + iounmap(c2dev->kva); + iounmap(c2dev->regs); + iounmap(c2dev->mmio_txp_ring); + iounmap(c2dev->mmio_rxp_ring); + + /* Free the hardware structure */ + ib_dealloc_device(&c2dev->ibdev); + + /* Release reserved PCI I/O and memory resources */ + pci_release_regions(pcidev); + + /* Disable PCI device */ + pci_disable_device(pcidev); + + /* Clear driver specific data */ + pci_set_drvdata(pcidev, NULL); +} + +static struct pci_driver c2_pci_driver = { + .name = DRV_NAME, + .id_table = c2_pci_table, + .probe = c2_probe, + .remove = __devexit_p(c2_remove), +}; + +static int __init c2_init_module(void) +{ + return pci_module_init(&c2_pci_driver); +} + +static void __exit c2_exit_module(void) +{ + pci_unregister_driver(&c2_pci_driver); +} + +module_init(c2_init_module); +module_exit(c2_exit_module); |