diff options
Diffstat (limited to 'drivers/input/keyboard')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/keyboard/adp5588-keys.c | 74 | ||||
| -rw-r--r-- | drivers/input/keyboard/atkbd.c | 12 | ||||
| -rw-r--r-- | drivers/input/keyboard/gpio_keys_polled.c | 261 |
5 files changed, 314 insertions, 50 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index b8c51b9781db..3a87f3ba5f75 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -179,6 +179,22 @@ config KEYBOARD_GPIO To compile this driver as a module, choose M here: the module will be called gpio_keys. +config KEYBOARD_GPIO_POLLED + tristate "Polled GPIO buttons" + depends on GENERIC_GPIO + select INPUT_POLLDEV + help + This driver implements support for buttons connected + to GPIO pins that are not capable of generating interrupts. + + Say Y here if your device has buttons connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called gpio_keys_polled. + config KEYBOARD_TCA6416 tristate "TCA6416 Keypad Support" depends on I2C diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a34452e8ebe2..622de73a445d 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o +obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index b92d1cd5cba1..af45d275f686 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -4,7 +4,7 @@ * I2C QWERTY Keypad and IO Expander * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2008-2009 Analog Devices Inc. + * Copyright (C) 2008-2010 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -24,29 +24,6 @@ #include <linux/i2c/adp5588.h> - /* Configuration Register1 */ -#define AUTO_INC (1 << 7) -#define GPIEM_CFG (1 << 6) -#define OVR_FLOW_M (1 << 5) -#define INT_CFG (1 << 4) -#define OVR_FLOW_IEN (1 << 3) -#define K_LCK_IM (1 << 2) -#define GPI_IEN (1 << 1) -#define KE_IEN (1 << 0) - -/* Interrupt Status Register */ -#define CMP2_INT (1 << 5) -#define CMP1_INT (1 << 4) -#define OVR_FLOW_INT (1 << 3) -#define K_LCK_INT (1 << 2) -#define GPI_INT (1 << 1) -#define KE_INT (1 << 0) - -/* Key Lock and Event Counter Register */ -#define K_LCK_EN (1 << 6) -#define LCK21 0x30 -#define KEC 0xF - /* Key Event Register xy */ #define KEY_EV_PRESSED (1 << 7) #define KEY_EV_MASK (0x7F) @@ -55,10 +32,6 @@ #define KEYP_MAX_EVENT 10 -#define MAXGPIO 18 -#define ADP_BANK(offs) ((offs) >> 3) -#define ADP_BIT(offs) (1u << ((offs) & 0x7)) - /* * Early pre 4.0 Silicon required to delay readout by at least 25ms, * since the Event Counter Register updated 25ms after the interrupt @@ -75,7 +48,7 @@ struct adp5588_kpad { const struct adp5588_gpi_map *gpimap; unsigned short gpimapsize; #ifdef CONFIG_GPIOLIB - unsigned char gpiomap[MAXGPIO]; + unsigned char gpiomap[ADP5588_MAXGPIO]; bool export_gpio; struct gpio_chip gc; struct mutex gpio_lock; /* Protect cached dir, dat_out */ @@ -103,8 +76,8 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit); } @@ -113,8 +86,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, unsigned off, int val) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); mutex_lock(&kpad->gpio_lock); @@ -132,8 +105,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip, static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -150,8 +123,8 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, unsigned off, int val) { struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); - unsigned int bank = ADP_BANK(kpad->gpiomap[off]); - unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]); int ret; mutex_lock(&kpad->gpio_lock); @@ -176,7 +149,7 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip, static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad, const struct adp5588_kpad_platform_data *pdata) { - bool pin_used[MAXGPIO]; + bool pin_used[ADP5588_MAXGPIO]; int n_unused = 0; int i; @@ -191,7 +164,7 @@ static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad, for (i = 0; i < kpad->gpimapsize; i++) pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true; - for (i = 0; i < MAXGPIO; i++) + for (i = 0; i < ADP5588_MAXGPIO; i++) if (!pin_used[i]) kpad->gpiomap[n_unused++] = i; @@ -234,7 +207,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad) return error; } - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { kpad->dat_out[i] = adp5588_read(kpad->client, GPIO_DAT_OUT1 + i); kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i); @@ -318,11 +291,11 @@ static void adp5588_work(struct work_struct *work) status = adp5588_read(client, INT_STAT); - if (status & OVR_FLOW_INT) /* Unlikely and should never happen */ + if (status & ADP5588_OVR_FLOW_INT) /* Unlikely and should never happen */ dev_err(&client->dev, "Event Overflow Error\n"); - if (status & KE_INT) { - ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC; + if (status & ADP5588_KE_INT) { + ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC; if (ev_cnt) { adp5588_report_events(kpad, ev_cnt); input_sync(kpad->input); @@ -360,7 +333,7 @@ static int __devinit adp5588_setup(struct i2c_client *client) if (pdata->en_keylock) { ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1); ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2); - ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN); + ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN); } for (i = 0; i < KEYP_MAX_EVENT; i++) @@ -384,7 +357,7 @@ static int __devinit adp5588_setup(struct i2c_client *client) } if (gpio_data) { - for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) { int pull_mask = gpio_data->pullup_dis_mask; ret |= adp5588_write(client, GPIO_PULL1 + i, @@ -392,11 +365,14 @@ static int __devinit adp5588_setup(struct i2c_client *client) } } - ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT | - OVR_FLOW_INT | K_LCK_INT | - GPI_INT | KE_INT); /* Status is W1C */ + ret |= adp5588_write(client, INT_STAT, + ADP5588_CMP2_INT | ADP5588_CMP1_INT | + ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT | + ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */ - ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN); + ret |= adp5588_write(client, CFG, ADP5588_INT_CFG | + ADP5588_OVR_FLOW_IEN | + ADP5588_KE_IEN); if (ret < 0) { dev_err(&client->dev, "Write Error\n"); diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index d358ef8623f4..11478eb2c27d 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -63,6 +63,10 @@ static bool atkbd_extra; module_param_named(extra, atkbd_extra, bool, 0); MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); +static bool atkbd_terminal; +module_param_named(terminal, atkbd_terminal, bool, 0); +MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); + /* * Scancode to keycode tables. These are just the default setting, and * are loadable via a userland utility. @@ -136,7 +140,8 @@ static const unsigned short atkbd_unxlate_table[128] = { #define ATKBD_CMD_ENABLE 0x00f4 #define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ #define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ -#define ATKBD_CMD_SETALL_MBR 0x00fa +#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ +#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ #define ATKBD_CMD_RESET_BAT 0x02ff #define ATKBD_CMD_RESEND 0x00fe #define ATKBD_CMD_EX_ENABLE 0x10ea @@ -764,6 +769,11 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra } } + if (atkbd_terminal) { + ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); + return 3; + } + if (target_set != 3) return 2; diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c new file mode 100644 index 000000000000..4c17aff20657 --- /dev/null +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -0,0 +1,261 @@ +/* + * Driver for buttons on GPIO lines not capable of generating interrupts + * + * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com> + * + * This file was based on: /drivers/input/misc/cobalt_btns.c + * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> + * + * also was based on: /drivers/input/keyboard/gpio_keys.c + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> + +#define DRV_NAME "gpio-keys-polled" + +struct gpio_keys_button_data { + int last_state; + int count; + int threshold; + int can_sleep; +}; + +struct gpio_keys_polled_dev { + struct input_polled_dev *poll_dev; + struct device *dev; + struct gpio_keys_platform_data *pdata; + struct gpio_keys_button_data data[0]; +}; + +static void gpio_keys_polled_check_state(struct input_dev *input, + struct gpio_keys_button *button, + struct gpio_keys_button_data *bdata) +{ + int state; + + if (bdata->can_sleep) + state = !!gpio_get_value_cansleep(button->gpio); + else + state = !!gpio_get_value(button->gpio); + + if (state != bdata->last_state) { + unsigned int type = button->type ?: EV_KEY; + + input_event(input, type, button->code, + !!(state ^ button->active_low)); + input_sync(input); + bdata->count = 0; + bdata->last_state = state; + } +} + +static void gpio_keys_polled_poll(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + struct input_dev *input = dev->input; + int i; + + for (i = 0; i < bdev->pdata->nbuttons; i++) { + struct gpio_keys_button_data *bdata = &bdev->data[i]; + + if (bdata->count < bdata->threshold) + bdata->count++; + else + gpio_keys_polled_check_state(input, &pdata->buttons[i], + bdata); + } +} + +static void gpio_keys_polled_open(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->enable) + pdata->enable(bdev->dev); +} + +static void gpio_keys_polled_close(struct input_polled_dev *dev) +{ + struct gpio_keys_polled_dev *bdev = dev->private; + struct gpio_keys_platform_data *pdata = bdev->pdata; + + if (pdata->disable) + pdata->disable(bdev->dev); +} + +static int __devinit gpio_keys_polled_probe(struct platform_device *pdev) +{ + struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct gpio_keys_polled_dev *bdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int error; + int i; + + if (!pdata || !pdata->poll_interval) + return -EINVAL; + + bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) + + pdata->nbuttons * sizeof(struct gpio_keys_button_data), + GFP_KERNEL); + if (!bdev) { + dev_err(dev, "no memory for private data\n"); + return -ENOMEM; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + dev_err(dev, "no memory for polled device\n"); + error = -ENOMEM; + goto err_free_bdev; + } + + poll_dev->private = bdev; + poll_dev->poll = gpio_keys_polled_poll; + poll_dev->poll_interval = pdata->poll_interval; + poll_dev->open = gpio_keys_polled_open; + poll_dev->close = gpio_keys_polled_close; + + input = poll_dev->input; + + input->evbit[0] = BIT(EV_KEY); + input->name = pdev->name; + input->phys = DRV_NAME"/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_keys_button *button = &pdata->buttons[i]; + struct gpio_keys_button_data *bdata = &bdev->data[i]; + unsigned int gpio = button->gpio; + unsigned int type = button->type ?: EV_KEY; + + if (button->wakeup) { + dev_err(dev, DRV_NAME " does not support wakeup\n"); + error = -EINVAL; + goto err_free_gpio; + } + + error = gpio_request(gpio, + button->desc ? button->desc : DRV_NAME); + if (error) { + dev_err(dev, "unable to claim gpio %u, err=%d\n", + gpio, error); + goto err_free_gpio; + } + + error = gpio_direction_input(gpio); + if (error) { + dev_err(dev, + "unable to set direction on gpio %u, err=%d\n", + gpio, error); + goto err_free_gpio; + } + + bdata->can_sleep = gpio_cansleep(gpio); + bdata->last_state = -1; + bdata->threshold = DIV_ROUND_UP(button->debounce_interval, + pdata->poll_interval); + + input_set_capability(input, type, button->code); + } + + bdev->poll_dev = poll_dev; + bdev->dev = dev; + bdev->pdata = pdata; + platform_set_drvdata(pdev, bdev); + + error = input_register_polled_device(poll_dev); + if (error) { + dev_err(dev, "unable to register polled device, err=%d\n", + error); + goto err_free_gpio; + } + + /* report initial state of the buttons */ + for (i = 0; i < pdata->nbuttons; i++) + gpio_keys_polled_check_state(input, &pdata->buttons[i], + &bdev->data[i]); + + return 0; + +err_free_gpio: + while (--i >= 0) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(poll_dev); + +err_free_bdev: + kfree(bdev); + + platform_set_drvdata(pdev, NULL); + return error; +} + +static int __devexit gpio_keys_polled_remove(struct platform_device *pdev) +{ + struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev); + struct gpio_keys_platform_data *pdata = bdev->pdata; + int i; + + input_unregister_polled_device(bdev->poll_dev); + + for (i = 0; i < pdata->nbuttons; i++) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(bdev->poll_dev); + + kfree(bdev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver gpio_keys_polled_driver = { + .probe = gpio_keys_polled_probe, + .remove = __devexit_p(gpio_keys_polled_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_keys_polled_init(void) +{ + return platform_driver_register(&gpio_keys_polled_driver); +} + +static void __exit gpio_keys_polled_exit(void) +{ + platform_driver_unregister(&gpio_keys_polled_driver); +} + +module_init(gpio_keys_polled_init); +module_exit(gpio_keys_polled_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); +MODULE_DESCRIPTION("Polled GPIO Buttons driver"); +MODULE_ALIAS("platform:" DRV_NAME); |