diff options
Diffstat (limited to 'drivers/input/keyboard')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/keyboard/imx_keypad.c | 594 |
3 files changed, 604 insertions, 0 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index c72283c6916f..616a3916d187 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -292,6 +292,15 @@ config KEYBOARD_MAX7359 To compile this driver as a module, choose M here: the module will be called max7359_keypad. +config KEYBOARD_IMX + tristate "IMX keypad support" + depends on ARCH_MXC + help + Enable support for IMX keypad port. + + To compile this driver as a module, choose M here: the + module will be called imx_keypad. + config KEYBOARD_NEWTON tristate "Newton keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 78654ef65206..706c6b5ed5f4 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c new file mode 100644 index 000000000000..2ee5b798024d --- /dev/null +++ b/drivers/input/keyboard/imx_keypad.c @@ -0,0 +1,594 @@ +/* + * Driver for the IMX keypad port. + * Copyright (C) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * <<Power management needs to be implemented>>. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input/matrix_keypad.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/timer.h> + +/* + * Keypad Controller registers (halfword) + */ +#define KPCR 0x00 /* Keypad Control Register */ + +#define KPSR 0x02 /* Keypad Status Register */ +#define KBD_STAT_KPKD (0x1 << 0) /* Key Press Interrupt Status bit (w1c) */ +#define KBD_STAT_KPKR (0x1 << 1) /* Key Release Interrupt Status bit (w1c) */ +#define KBD_STAT_KDSC (0x1 << 2) /* Key Depress Synch Chain Status bit (w1c)*/ +#define KBD_STAT_KRSS (0x1 << 3) /* Key Release Synch Status bit (w1c)*/ +#define KBD_STAT_KDIE (0x1 << 8) /* Key Depress Interrupt Enable Status bit */ +#define KBD_STAT_KRIE (0x1 << 9) /* Key Release Interrupt Enable */ +#define KBD_STAT_KPPEN (0x1 << 10) /* Keypad Clock Enable */ + +#define KDDR 0x04 /* Keypad Data Direction Register */ +#define KPDR 0x06 /* Keypad Data Register */ + +#define MAX_MATRIX_KEY_ROWS 8 +#define MAX_MATRIX_KEY_COLS 8 +#define MATRIX_ROW_SHIFT 3 + +#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS) + +struct imx_keypad { + + struct clk *clk; + struct input_dev *input_dev; + void __iomem *mmio_base; + + int irq; + struct timer_list check_matrix_timer; + + /* + * The matrix is stable only if no changes are detected after + * IMX_KEYPAD_SCANS_FOR_STABILITY scans + */ +#define IMX_KEYPAD_SCANS_FOR_STABILITY 3 + int stable_count; + + bool enabled; + + /* Masks for enabled rows/cols */ + unsigned short rows_en_mask; + unsigned short cols_en_mask; + + unsigned short keycodes[MAX_MATRIX_KEY_NUM]; + + /* + * Matrix states: + * -stable: achieved after a complete debounce process. + * -unstable: used in the debouncing process. + */ + unsigned short matrix_stable_state[MAX_MATRIX_KEY_COLS]; + unsigned short matrix_unstable_state[MAX_MATRIX_KEY_COLS]; +}; + +/* Scan the matrix and return the new state in *matrix_volatile_state. */ +static void imx_keypad_scan_matrix(struct imx_keypad *keypad, + unsigned short *matrix_volatile_state) +{ + int col; + unsigned short reg_val; + + for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) { + if ((keypad->cols_en_mask & (1 << col)) == 0) + continue; + /* + * Discharge keypad capacitance: + * 2. write 1s on column data. + * 3. configure columns as totem-pole to discharge capacitance. + * 4. configure columns as open-drain. + */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val |= 0xff00; + writew(reg_val, keypad->mmio_base + KPDR); + + reg_val = readw(keypad->mmio_base + KPCR); + reg_val &= ~((keypad->cols_en_mask & 0xff) << 8); + writew(reg_val, keypad->mmio_base + KPCR); + + udelay(2); + + reg_val = readw(keypad->mmio_base + KPCR); + reg_val |= (keypad->cols_en_mask & 0xff) << 8; + writew(reg_val, keypad->mmio_base + KPCR); + + /* + * 5. Write a single column to 0, others to 1. + * 6. Sample row inputs and save data. + * 7. Repeat steps 2 - 6 for remaining columns. + */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val &= ~(1 << (8 + col)); + writew(reg_val, keypad->mmio_base + KPDR); + + /* + * Delay added to avoid propagating the 0 from column to row + * when scanning. + */ + udelay(5); + + /* + * 1s in matrix_volatile_state[col] means key pressures + * throw data from non enabled rows. + */ + reg_val = readw(keypad->mmio_base + KPDR); + matrix_volatile_state[col] = (~reg_val) & keypad->rows_en_mask; + } + + /* + * Return in standby mode: + * 9. write 0s to columns + */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val &= 0x00ff; + writew(reg_val, keypad->mmio_base + KPDR); +} + +/* + * Compare the new matrix state (volatile) with the stable one stored in + * keypad->matrix_stable_state and fire events if changes are detected. + */ +static void imx_keypad_fire_events(struct imx_keypad *keypad, + unsigned short *matrix_volatile_state) +{ + struct input_dev *input_dev = keypad->input_dev; + int row, col; + + for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) { + unsigned short bits_changed; + int code; + + if ((keypad->cols_en_mask & (1 << col)) == 0) + continue; /* Column is not enabled */ + + bits_changed = keypad->matrix_stable_state[col] ^ + matrix_volatile_state[col]; + + if (bits_changed == 0) + continue; /* Column does not contain changes */ + + for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) { + if ((keypad->rows_en_mask & (1 << row)) == 0) + continue; /* Row is not enabled */ + if ((bits_changed & (1 << row)) == 0) + continue; /* Row does not contain changes */ + + code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT); + input_event(input_dev, EV_MSC, MSC_SCAN, code); + input_report_key(input_dev, keypad->keycodes[code], + matrix_volatile_state[col] & (1 << row)); + dev_dbg(&input_dev->dev, "Event code: %d, val: %d", + keypad->keycodes[code], + matrix_volatile_state[col] & (1 << row)); + } + } + input_sync(input_dev); +} + +/* + * imx_keypad_check_for_events is the timer handler. + */ +static void imx_keypad_check_for_events(unsigned long data) +{ + struct imx_keypad *keypad = (struct imx_keypad *) data; + unsigned short matrix_volatile_state[MAX_MATRIX_KEY_COLS]; + unsigned short reg_val; + bool state_changed, is_zero_matrix; + int i; + + memset(matrix_volatile_state, 0, sizeof(matrix_volatile_state)); + + imx_keypad_scan_matrix(keypad, matrix_volatile_state); + + state_changed = false; + for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) { + if ((keypad->cols_en_mask & (1 << i)) == 0) + continue; + + if (keypad->matrix_unstable_state[i] ^ matrix_volatile_state[i]) { + state_changed = true; + break; + } + } + + /* + * If the matrix state is changed from the previous scan + * (Re)Begin the debouncing process, saving the new state in + * keypad->matrix_unstable_state. + * else + * Increase the count of number of scans with a stable state. + */ + if (state_changed) { + memcpy(keypad->matrix_unstable_state, matrix_volatile_state, + sizeof(matrix_volatile_state)); + keypad->stable_count = 0; + } else + keypad->stable_count++; + + /* + * If the matrix is not as stable as we want reschedule scan + * in the near future. + */ + if (keypad->stable_count < IMX_KEYPAD_SCANS_FOR_STABILITY) { + mod_timer(&keypad->check_matrix_timer, + jiffies + msecs_to_jiffies(10)); + return; + } + + /* + * If the matrix state is stable, fire the events and save the new + * stable state. Note, if the matrix is kept stable for longer + * (keypad->stable_count > IMX_KEYPAD_SCANS_FOR_STABILITY) all + * events have already been generated. + */ + if (keypad->stable_count == IMX_KEYPAD_SCANS_FOR_STABILITY) { + imx_keypad_fire_events(keypad, matrix_volatile_state); + + memcpy(keypad->matrix_stable_state, matrix_volatile_state, + sizeof(matrix_volatile_state)); + } + + is_zero_matrix = true; + for (i = 0; i < MAX_MATRIX_KEY_COLS; i++) { + if (matrix_volatile_state[i] != 0) { + is_zero_matrix = false; + break; + } + } + + + if (is_zero_matrix) { + /* + * All keys have been released. Enable only the KDI + * interrupt for future key presses (clear the KDI + * status bit and its sync chain before that). + */ + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KPKD | KBD_STAT_KDSC; + writew(reg_val, keypad->mmio_base + KPSR); + + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KDIE; + reg_val &= ~KBD_STAT_KRIE; + writew(reg_val, keypad->mmio_base + KPSR); + } else { + /* + * Some keys are still pressed. Schedule a rescan in + * attempt to detect multiple key presses and enable + * the KRI interrupt to react quickly to key release + * event. + */ + mod_timer(&keypad->check_matrix_timer, + jiffies + msecs_to_jiffies(60)); + + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KRSS; + writew(reg_val, keypad->mmio_base + KPSR); + + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KRIE; + reg_val &= ~KBD_STAT_KDIE; + writew(reg_val, keypad->mmio_base + KPSR); + } +} + +static irqreturn_t imx_keypad_irq_handler(int irq, void *dev_id) +{ + struct imx_keypad *keypad = dev_id; + unsigned short reg_val; + + reg_val = readw(keypad->mmio_base + KPSR); + + /* Disable both interrupt types */ + reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + /* Clear interrupts status bits */ + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD; + writew(reg_val, keypad->mmio_base + KPSR); + + if (keypad->enabled) { + /* The matrix is supposed to be changed */ + keypad->stable_count = 0; + + /* Schedule the scanning procedure near in the future */ + mod_timer(&keypad->check_matrix_timer, + jiffies + msecs_to_jiffies(2)); + } + + return IRQ_HANDLED; +} + +static void imx_keypad_config(struct imx_keypad *keypad) +{ + unsigned short reg_val; + + /* + * Include enabled rows in interrupt generation (KPCR[7:0]) + * Configure keypad columns as open-drain (KPCR[15:8]) + */ + reg_val = readw(keypad->mmio_base + KPCR); + reg_val |= keypad->rows_en_mask & 0xff; /* rows */ + reg_val |= (keypad->cols_en_mask & 0xff) << 8; /* cols */ + writew(reg_val, keypad->mmio_base + KPCR); + + /* Write 0's to KPDR[15:8] (Colums) */ + reg_val = readw(keypad->mmio_base + KPDR); + reg_val &= 0x00ff; + writew(reg_val, keypad->mmio_base + KPDR); + + /* Configure columns as output, rows as input (KDDR[15:0]) */ + writew(0xff00, keypad->mmio_base + KDDR); + + /* + * Clear Key Depress and Key Release status bit. + * Clear both synchronizer chain. + */ + reg_val = readw(keypad->mmio_base + KPSR); + reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD | + KBD_STAT_KDSC | KBD_STAT_KRSS; + writew(reg_val, keypad->mmio_base + KPSR); + + /* Enable KDI and disable KRI (avoid false release events). */ + reg_val |= KBD_STAT_KDIE; + reg_val &= ~KBD_STAT_KRIE; + writew(reg_val, keypad->mmio_base + KPSR); +} + +static void imx_keypad_inhibit(struct imx_keypad *keypad) +{ + unsigned short reg_val; + + /* Inhibit KDI and KRI interrupts. */ + reg_val = readw(keypad->mmio_base + KPSR); + reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE); + writew(reg_val, keypad->mmio_base + KPSR); + + /* Colums as open drain and disable all rows */ + writew(0xff00, keypad->mmio_base + KPCR); +} + +static void imx_keypad_close(struct input_dev *dev) +{ + struct imx_keypad *keypad = input_get_drvdata(dev); + + dev_dbg(&dev->dev, ">%s\n", __func__); + + /* Mark keypad as being inactive */ + keypad->enabled = false; + synchronize_irq(keypad->irq); + del_timer_sync(&keypad->check_matrix_timer); + + imx_keypad_inhibit(keypad); + + /* Disable clock unit */ + clk_disable(keypad->clk); +} + +static int imx_keypad_open(struct input_dev *dev) +{ + struct imx_keypad *keypad = input_get_drvdata(dev); + + dev_dbg(&dev->dev, ">%s\n", __func__); + + /* We became active from now */ + keypad->enabled = true; + + /* Enable the kpp clock */ + clk_enable(keypad->clk); + imx_keypad_config(keypad); + + /* Sanity control, not all the rows must be actived now. */ + if ((readw(keypad->mmio_base + KPDR) & keypad->rows_en_mask) == 0) { + dev_err(&dev->dev, + "too many keys pressed, control pins initialisation\n"); + goto open_err; + } + + return 0; + +open_err: + imx_keypad_close(dev); + return -EIO; +} + +static int __devinit imx_keypad_probe(struct platform_device *pdev) +{ + const struct matrix_keymap_data *keymap_data = pdev->dev.platform_data; + struct imx_keypad *keypad; + struct input_dev *input_dev; + struct resource *res; + int irq, error, i; + + if (keymap_data == NULL) { + dev_err(&pdev->dev, "no keymap defined\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq defined in platform data\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "no I/O memory defined in platform data\n"); + return -EINVAL; + } + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (res == NULL) { + dev_err(&pdev->dev, "failed to request I/O memory\n"); + return -EBUSY; + } + + input_dev = input_allocate_device(); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + error = -ENOMEM; + goto failed_rel_mem; + } + + keypad = kzalloc(sizeof(struct imx_keypad), GFP_KERNEL); + if (!keypad) { + dev_err(&pdev->dev, "not enough memory for driver data\n"); + error = -ENOMEM; + goto failed_free_input; + } + + keypad->input_dev = input_dev; + keypad->irq = irq; + keypad->stable_count = 0; + + setup_timer(&keypad->check_matrix_timer, + imx_keypad_check_for_events, (unsigned long) keypad); + + keypad->mmio_base = ioremap(res->start, resource_size(res)); + if (keypad->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to remap I/O memory\n"); + error = -ENOMEM; + goto failed_free_priv; + } + + keypad->clk = clk_get(&pdev->dev, "kpp"); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clock\n"); + error = PTR_ERR(keypad->clk); + goto failed_unmap; + } + + /* Search for rows and cols enabled */ + for (i = 0; i < keymap_data->keymap_size; i++) { + keypad->rows_en_mask |= 1 << KEY_ROW(keymap_data->keymap[i]); + keypad->cols_en_mask |= 1 << KEY_COL(keymap_data->keymap[i]); + } + + if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) || + keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) { + dev_err(&pdev->dev, + "invalid key data (too many rows or colums)\n"); + error = -EINVAL; + goto failed_clock_put; + } + dev_dbg(&pdev->dev, "enabled rows mask: %x\n", keypad->rows_en_mask); + dev_dbg(&pdev->dev, "enabled cols mask: %x\n", keypad->cols_en_mask); + + /* Init the Input device */ + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_dev->open = imx_keypad_open; + input_dev->close = imx_keypad_close; + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + input_dev->keycode = keypad->keycodes; + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes); + + matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT, + keypad->keycodes, input_dev->keybit); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, keypad); + + /* Ensure that the keypad will stay dormant until opened */ + imx_keypad_inhibit(keypad); + + error = request_irq(irq, imx_keypad_irq_handler, IRQF_DISABLED, + pdev->name, keypad); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto failed_clock_put; + } + + /* Register the input device */ + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto failed_free_irq; + } + + platform_set_drvdata(pdev, keypad); + device_init_wakeup(&pdev->dev, 1); + + return 0; + +failed_free_irq: + free_irq(irq, pdev); +failed_clock_put: + clk_put(keypad->clk); +failed_unmap: + iounmap(keypad->mmio_base); +failed_free_priv: + kfree(keypad); +failed_free_input: + input_free_device(input_dev); +failed_rel_mem: + release_mem_region(res->start, resource_size(res)); + return error; +} + +static int __devexit imx_keypad_remove(struct platform_device *pdev) +{ + struct imx_keypad *keypad = platform_get_drvdata(pdev); + struct resource *res; + + dev_dbg(&pdev->dev, ">%s\n", __func__); + + platform_set_drvdata(pdev, NULL); + + input_unregister_device(keypad->input_dev); + + free_irq(keypad->irq, keypad); + clk_put(keypad->clk); + + iounmap(keypad->mmio_base); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, resource_size(res)); + + kfree(keypad); + + return 0; +} + +static struct platform_driver imx_keypad_driver = { + .driver = { + .name = "imx-keypad", + .owner = THIS_MODULE, + }, + .probe = imx_keypad_probe, + .remove = __devexit_p(imx_keypad_remove), +}; + +static int __init imx_keypad_init(void) +{ + return platform_driver_register(&imx_keypad_driver); +} + +static void __exit imx_keypad_exit(void) +{ + platform_driver_unregister(&imx_keypad_driver); +} + +module_init(imx_keypad_init); +module_exit(imx_keypad_exit); + +MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>"); +MODULE_DESCRIPTION("IMX Keypad Port Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:imx-keypad"); |