diff options
Diffstat (limited to 'drivers/input/misc')
| -rw-r--r-- | drivers/input/misc/88pm860x_onkey.c | 155 | ||||
| -rw-r--r-- | drivers/input/misc/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/misc/apanel.c | 2 | ||||
| -rw-r--r-- | drivers/input/misc/atlas_btns.c | 2 | ||||
| -rw-r--r-- | drivers/input/misc/rotary_encoder.c | 14 | ||||
| -rw-r--r-- | drivers/input/misc/uinput.c | 4 | ||||
| -rw-r--r-- | drivers/input/misc/winbond-cir.c | 213 |
8 files changed, 287 insertions, 114 deletions
diff --git a/drivers/input/misc/88pm860x_onkey.c b/drivers/input/misc/88pm860x_onkey.c new file mode 100644 index 000000000000..69a48e8701b9 --- /dev/null +++ b/drivers/input/misc/88pm860x_onkey.c @@ -0,0 +1,155 @@ +/* + * 88pm860x_onkey.c - Marvell 88PM860x ONKEY driver + * + * Copyright (C) 2009-2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mfd/88pm860x.h> + +#define PM8607_WAKEUP 0x0b + +#define LONG_ONKEY_EN (1 << 1) +#define ONKEY_STATUS (1 << 0) + +struct pm860x_onkey_info { + struct input_dev *idev; + struct pm860x_chip *chip; + struct i2c_client *i2c; + struct device *dev; + int irq; +}; + +/* 88PM860x gives us an interrupt when ONKEY is held */ +static irqreturn_t pm860x_onkey_handler(int irq, void *data) +{ + struct pm860x_onkey_info *info = data; + int ret; + + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + ret &= ONKEY_STATUS; + input_report_key(info->idev, KEY_POWER, ret); + input_sync(info->idev); + + /* Enable 8-second long onkey detection */ + pm860x_set_bits(info->i2c, PM8607_WAKEUP, 3, LONG_ONKEY_EN); + return IRQ_HANDLED; +} + +static int __devinit pm860x_onkey_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_onkey_info *info; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + return -EINVAL; + } + + info = kzalloc(sizeof(struct pm860x_onkey_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->chip = chip; + info->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + info->dev = &pdev->dev; + info->irq = irq + chip->irq_base; + + info->idev = input_allocate_device(); + if (!info->idev) { + dev_err(chip->dev, "Failed to allocate input dev\n"); + ret = -ENOMEM; + goto out; + } + + info->idev->name = "88pm860x_on"; + info->idev->phys = "88pm860x_on/input0"; + info->idev->id.bustype = BUS_I2C; + info->idev->dev.parent = &pdev->dev; + info->irq = irq; + info->idev->evbit[0] = BIT_MASK(EV_KEY); + info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); + + ret = input_register_device(info->idev); + if (ret) { + dev_err(chip->dev, "Can't register input device: %d\n", ret); + goto out_reg; + } + + ret = request_threaded_irq(info->irq, NULL, pm860x_onkey_handler, + IRQF_ONESHOT, "onkey", info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq, ret); + goto out_irq; + } + + platform_set_drvdata(pdev, info); + return 0; + +out_irq: + input_unregister_device(info->idev); + kfree(info); + return ret; + +out_reg: + input_free_device(info->idev); +out: + kfree(info); + return ret; +} + +static int __devexit pm860x_onkey_remove(struct platform_device *pdev) +{ + struct pm860x_onkey_info *info = platform_get_drvdata(pdev); + + free_irq(info->irq, info); + input_unregister_device(info->idev); + kfree(info); + return 0; +} + +static struct platform_driver pm860x_onkey_driver = { + .driver = { + .name = "88pm860x-onkey", + .owner = THIS_MODULE, + }, + .probe = pm860x_onkey_probe, + .remove = __devexit_p(pm860x_onkey_remove), +}; + +static int __init pm860x_onkey_init(void) +{ + return platform_driver_register(&pm860x_onkey_driver); +} +module_init(pm860x_onkey_init); + +static void __exit pm860x_onkey_exit(void) +{ + platform_driver_unregister(&pm860x_onkey_driver); +} +module_exit(pm860x_onkey_exit); + +MODULE_DESCRIPTION("Marvell 88PM860x ONKEY driver"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 16ec5233441c..7097bfe581d7 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -12,6 +12,16 @@ menuconfig INPUT_MISC if INPUT_MISC +config INPUT_88PM860X_ONKEY + tristate "88PM860x ONKEY support" + depends on MFD_88PM860X + help + Support the ONKEY of Marvell 88PM860x PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the module + will be called 88pm860x_onkey. + config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index a8b84854fb7b..b611615e24ad 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -4,6 +4,7 @@ # Each configuration option enables a list of files. +obj-$(CONFIG_INPUT_88PM860X_ONKEY) += 88pm860x_onkey.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index 71b82434264d..a8d2b8db4e35 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -149,7 +149,7 @@ static void apanel_shutdown(struct i2c_client *client) apanel_remove(client); } -static struct i2c_device_id apanel_id[] = { +static const struct i2c_device_id apanel_id[] = { { "fujitsu_apanel", 0 }, { } }; diff --git a/drivers/input/misc/atlas_btns.c b/drivers/input/misc/atlas_btns.c index 1b871917340a..dfaa9a045ed8 100644 --- a/drivers/input/misc/atlas_btns.c +++ b/drivers/input/misc/atlas_btns.c @@ -47,7 +47,7 @@ static acpi_status acpi_atlas_button_setup(acpi_handle region_handle, static acpi_status acpi_atlas_button_handler(u32 function, acpi_physical_address address, - u32 bit_width, acpi_integer *value, + u32 bit_width, u64 *value, void *handler_context, void *region_context) { acpi_status status; diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 3b9f588fc747..4ae07935985e 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -152,6 +152,13 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev) goto exit_unregister_input; } + err = gpio_direction_input(pdata->gpio_a); + if (err) { + dev_err(&pdev->dev, "unable to set GPIO %d for input\n", + pdata->gpio_a); + goto exit_unregister_input; + } + err = gpio_request(pdata->gpio_b, DRV_NAME); if (err) { dev_err(&pdev->dev, "unable to request GPIO %d\n", @@ -159,6 +166,13 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev) goto exit_free_gpio_a; } + err = gpio_direction_input(pdata->gpio_b); + if (err) { + dev_err(&pdev->dev, "unable to set GPIO %d for input\n", + pdata->gpio_b); + goto exit_free_gpio_a; + } + /* request the IRQs */ err = request_irq(encoder->irq_a, &rotary_encoder_irq, IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index d3f57245420a..1477466076ad 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -34,7 +34,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/smp_lock.h> #include <linux/fs.h> #include <linux/miscdevice.h> #include <linux/uinput.h> @@ -284,7 +283,6 @@ static int uinput_open(struct inode *inode, struct file *file) if (!newdev) return -ENOMEM; - lock_kernel(); mutex_init(&newdev->mutex); spin_lock_init(&newdev->requests_lock); init_waitqueue_head(&newdev->requests_waitq); @@ -292,7 +290,7 @@ static int uinput_open(struct inode *inode, struct file *file) newdev->state = UIST_NEW_DEVICE; file->private_data = newdev; - unlock_kernel(); + nonseekable_open(inode, file); return 0; } diff --git a/drivers/input/misc/winbond-cir.c b/drivers/input/misc/winbond-cir.c index c8f5a9a3fa14..cbec3dfdd42b 100644 --- a/drivers/input/misc/winbond-cir.c +++ b/drivers/input/misc/winbond-cir.c @@ -538,6 +538,7 @@ wbcir_reset_irdata(struct wbcir_data *data) data->irdata_count = 0; data->irdata_off = 0; data->irdata_error = 0; + data->idle_count = 0; } /* Adds one bit of irdata */ @@ -1006,7 +1007,6 @@ wbcir_irq_handler(int irqno, void *cookie) } wbcir_reset_irdata(data); - data->idle_count = 0; } out: @@ -1018,7 +1018,7 @@ out: /***************************************************************************** * - * SUSPEND/RESUME FUNCTIONS + * SETUP/INIT/SUSPEND/RESUME FUNCTIONS * *****************************************************************************/ @@ -1197,7 +1197,16 @@ finish: } /* Disable interrupts */ + wbcir_select_bank(data, WBCIR_BANK_0); outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); + + /* + * ACPI will set the HW disable bit for SP3 which means that the + * output signals are left in an undefined state which may cause + * spurious interrupts which we need to ignore until the hardware + * is reinitialized. + */ + disable_irq(data->irq); } static int @@ -1207,37 +1216,15 @@ wbcir_suspend(struct pnp_dev *device, pm_message_t state) return 0; } -static int -wbcir_resume(struct pnp_dev *device) -{ - struct wbcir_data *data = pnp_get_drvdata(device); - - /* Clear BUFF_EN, Clear END_EN, Clear MATCH_EN */ - wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07); - - /* Clear CEIR_EN */ - wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01); - - /* Enable interrupts */ - wbcir_reset_irdata(data); - outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER); - - return 0; -} - - - -/***************************************************************************** - * - * SETUP/INIT FUNCTIONS - * - *****************************************************************************/ - static void -wbcir_cfg_ceir(struct wbcir_data *data) +wbcir_init_hw(struct wbcir_data *data) { u8 tmp; + /* Disable interrupts */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); + /* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */ tmp = protocol << 4; if (invert) @@ -1264,6 +1251,93 @@ wbcir_cfg_ceir(struct wbcir_data *data) * set SP3_IRRX_SW to binary 01, helpfully not documented */ outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS); + + /* Enable extended mode */ + wbcir_select_bank(data, WBCIR_BANK_2); + outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1); + + /* + * Configure baud generator, IR data will be sampled at + * a bitrate of: (24Mhz * prescaler) / (divisor * 16). + * + * The ECIR registers include a flag to change the + * 24Mhz clock freq to 48Mhz. + * + * It's not documented in the specs, but fifo levels + * other than 16 seems to be unsupported. + */ + + /* prescaler 1.0, tx/rx fifo lvl 16 */ + outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); + + /* Set baud divisor to generate one byte per bit/cell */ + switch (protocol) { + case IR_PROTOCOL_RC5: + outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL); + break; + case IR_PROTOCOL_RC6: + outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL); + break; + case IR_PROTOCOL_NEC: + outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL); + break; + } + outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); + + /* Set CEIR mode */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR); + inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ + inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ + + /* Disable RX demod, run-length encoding/decoding, set freq span */ + wbcir_select_bank(data, WBCIR_BANK_7); + outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG); + + /* Disable timer */ + wbcir_select_bank(data, WBCIR_BANK_4); + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1); + + /* Enable MSR interrupt, Clear AUX_IRX */ + wbcir_select_bank(data, WBCIR_BANK_5); + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2); + + /* Disable CRC */ + wbcir_select_bank(data, WBCIR_BANK_6); + outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3); + + /* Set RX/TX (de)modulation freq, not really used */ + wbcir_select_bank(data, WBCIR_BANK_7); + outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC); + outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC); + + /* Set invert and pin direction */ + if (invert) + outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4); + else + outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4); + + /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */ + wbcir_select_bank(data, WBCIR_BANK_0); + outb(0x97, data->sbase + WBCIR_REG_SP3_FCR); + + /* Clear AUX status bits */ + outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR); + + /* Enable interrupts */ + wbcir_reset_irdata(data); + outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER); +} + +static int +wbcir_resume(struct pnp_dev *device) +{ + struct wbcir_data *data = pnp_get_drvdata(device); + + wbcir_init_hw(data); + enable_irq(data->irq); + + return 0; } static int __devinit @@ -1393,86 +1467,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) device_init_wakeup(&device->dev, 1); - wbcir_cfg_ceir(data); - - /* Disable interrupts */ - wbcir_select_bank(data, WBCIR_BANK_0); - outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER); - - /* Enable extended mode */ - wbcir_select_bank(data, WBCIR_BANK_2); - outb(WBCIR_EXT_ENABLE, data->sbase + WBCIR_REG_SP3_EXCR1); - - /* - * Configure baud generator, IR data will be sampled at - * a bitrate of: (24Mhz * prescaler) / (divisor * 16). - * - * The ECIR registers include a flag to change the - * 24Mhz clock freq to 48Mhz. - * - * It's not documented in the specs, but fifo levels - * other than 16 seems to be unsupported. - */ - - /* prescaler 1.0, tx/rx fifo lvl 16 */ - outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2); - - /* Set baud divisor to generate one byte per bit/cell */ - switch (protocol) { - case IR_PROTOCOL_RC5: - outb(0xA7, data->sbase + WBCIR_REG_SP3_BGDL); - break; - case IR_PROTOCOL_RC6: - outb(0x53, data->sbase + WBCIR_REG_SP3_BGDL); - break; - case IR_PROTOCOL_NEC: - outb(0x69, data->sbase + WBCIR_REG_SP3_BGDL); - break; - } - outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH); - - /* Set CEIR mode */ - wbcir_select_bank(data, WBCIR_BANK_0); - outb(0xC0, data->sbase + WBCIR_REG_SP3_MCR); - inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */ - inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */ - - /* Disable RX demod, run-length encoding/decoding, set freq span */ - wbcir_select_bank(data, WBCIR_BANK_7); - outb(0x10, data->sbase + WBCIR_REG_SP3_RCCFG); - - /* Disable timer */ - wbcir_select_bank(data, WBCIR_BANK_4); - outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1); - - /* Enable MSR interrupt, Clear AUX_IRX */ - wbcir_select_bank(data, WBCIR_BANK_5); - outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2); - - /* Disable CRC */ - wbcir_select_bank(data, WBCIR_BANK_6); - outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3); - - /* Set RX/TX (de)modulation freq, not really used */ - wbcir_select_bank(data, WBCIR_BANK_7); - outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC); - outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC); - - /* Set invert and pin direction */ - if (invert) - outb(0x10, data->sbase + WBCIR_REG_SP3_IRCFG4); - else - outb(0x00, data->sbase + WBCIR_REG_SP3_IRCFG4); - - /* Set FIFO thresholds (RX = 8, TX = 3), reset RX/TX */ - wbcir_select_bank(data, WBCIR_BANK_0); - outb(0x97, data->sbase + WBCIR_REG_SP3_FCR); - - /* Clear AUX status bits */ - outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR); - - /* Enable interrupts */ - outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER); + wbcir_init_hw(data); return 0; |