diff options
Diffstat (limited to 'drivers/input/touchscreen/s3c2410_ts.c')
| -rw-r--r-- | drivers/input/touchscreen/s3c2410_ts.c | 41 |
1 files changed, 16 insertions, 25 deletions
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 3755a47d053c..e0b7c834111d 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -26,7 +26,6 @@ #include <linux/errno.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/slab.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/init.h> @@ -38,9 +37,7 @@ #include <plat/adc.h> #include <plat/regs-adc.h> - -#include <mach/regs-gpio.h> -#include <mach/ts.h> +#include <plat/ts.h> #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) @@ -58,6 +55,8 @@ S3C2410_ADCTSC_AUTO_PST | \ S3C2410_ADCTSC_XY_PST(0)) +#define FEAT_PEN_IRQ (1 << 0) /* HAS ADCCLRINTPNDNUP */ + /* Per-touchscreen data. */ /** @@ -72,6 +71,7 @@ * @irq_tc: The interrupt number for pen up/down interrupt * @count: The number of samples collected. * @shift: The log2 of the maximum count to read in one go. + * @features: The features supported by the TSADC MOdule. */ struct s3c2410ts { struct s3c_adc_client *client; @@ -84,26 +84,12 @@ struct s3c2410ts { int irq_tc; int count; int shift; + int features; }; static struct s3c2410ts ts; /** - * s3c2410_ts_connect - configure gpio for s3c2410 systems - * - * Configure the GPIO for the S3C2410 system, where we have external FETs - * connected to the device (later systems such as the S3C2440 integrate - * these into the device). -*/ -static inline void s3c2410_ts_connect(void) -{ - s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); - s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); - s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); -} - -/** * get_down - return the down state of the pen * @data0: The data read from ADCDAT0 register. * @data1: The data read from ADCDAT1 register. @@ -189,6 +175,11 @@ static irqreturn_t stylus_irq(int irq, void *dev_id) else dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count); + if (ts.features & FEAT_PEN_IRQ) { + /* Clear pen down/up interrupt */ + writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP); + } + return IRQ_HANDLED; } @@ -297,9 +288,9 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) goto err_clk; } - /* Configure the touchscreen external FETs on the S3C2410 */ - if (!platform_get_device_id(pdev)->driver_data) - s3c2410_ts_connect(); + /* inititalise the gpio */ + if (info->cfg_gpio) + info->cfg_gpio(to_platform_device(ts.dev)); ts.client = s3c_adc_register(pdev, s3c24xx_ts_select, s3c24xx_ts_conversion, 1); @@ -335,6 +326,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev) ts.input->id.version = 0x0102; ts.shift = info->oversampling_shift; + ts.features = platform_get_device_id(pdev)->driver_data; ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED, "s3c2410_ts_pen", ts.input); @@ -421,15 +413,14 @@ static struct dev_pm_ops s3c_ts_pmops = { #endif static struct platform_device_id s3cts_driver_ids[] = { - { "s3c2410-ts", 0 }, - { "s3c2440-ts", 1 }, + { "s3c64xx-ts", FEAT_PEN_IRQ }, { } }; MODULE_DEVICE_TABLE(platform, s3cts_driver_ids); static struct platform_driver s3c_ts_driver = { .driver = { - .name = "s3c24xx-ts", + .name = "samsung-ts", .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &s3c_ts_pmops, |