diff options
Diffstat (limited to 'drivers/input')
| -rw-r--r-- | drivers/input/touchscreen/zinitix.c | 112 |
1 files changed, 56 insertions, 56 deletions
diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c index 8bd03278ad9a..52f9e9eaab14 100644 --- a/drivers/input/touchscreen/zinitix.c +++ b/drivers/input/touchscreen/zinitix.c @@ -15,75 +15,75 @@ /* Register Map */ -#define BT541_SWRESET_CMD 0x0000 -#define BT541_WAKEUP_CMD 0x0001 +#define ZINITIX_SWRESET_CMD 0x0000 +#define ZINITIX_WAKEUP_CMD 0x0001 -#define BT541_IDLE_CMD 0x0004 -#define BT541_SLEEP_CMD 0x0005 +#define ZINITIX_IDLE_CMD 0x0004 +#define ZINITIX_SLEEP_CMD 0x0005 -#define BT541_CLEAR_INT_STATUS_CMD 0x0003 -#define BT541_CALIBRATE_CMD 0x0006 -#define BT541_SAVE_STATUS_CMD 0x0007 -#define BT541_SAVE_CALIBRATION_CMD 0x0008 -#define BT541_RECALL_FACTORY_CMD 0x000f +#define ZINITIX_CLEAR_INT_STATUS_CMD 0x0003 +#define ZINITIX_CALIBRATE_CMD 0x0006 +#define ZINITIX_SAVE_STATUS_CMD 0x0007 +#define ZINITIX_SAVE_CALIBRATION_CMD 0x0008 +#define ZINITIX_RECALL_FACTORY_CMD 0x000f -#define BT541_THRESHOLD 0x0020 +#define ZINITIX_THRESHOLD 0x0020 -#define BT541_LARGE_PALM_REJECT_AREA_TH 0x003F +#define ZINITIX_LARGE_PALM_REJECT_AREA_TH 0x003F -#define BT541_DEBUG_REG 0x0115 /* 0~7 */ +#define ZINITIX_DEBUG_REG 0x0115 /* 0~7 */ -#define BT541_TOUCH_MODE 0x0010 -#define BT541_CHIP_REVISION 0x0011 -#define BT541_FIRMWARE_VERSION 0x0012 +#define ZINITIX_TOUCH_MODE 0x0010 +#define ZINITIX_CHIP_REVISION 0x0011 +#define ZINITIX_FIRMWARE_VERSION 0x0012 #define ZINITIX_USB_DETECT 0x116 -#define BT541_MINOR_FW_VERSION 0x0121 +#define ZINITIX_MINOR_FW_VERSION 0x0121 -#define BT541_VENDOR_ID 0x001C -#define BT541_HW_ID 0x0014 +#define ZINITIX_VENDOR_ID 0x001C +#define ZINITIX_HW_ID 0x0014 -#define BT541_DATA_VERSION_REG 0x0013 -#define BT541_SUPPORTED_FINGER_NUM 0x0015 -#define BT541_EEPROM_INFO 0x0018 -#define BT541_INITIAL_TOUCH_MODE 0x0019 +#define ZINITIX_DATA_VERSION_REG 0x0013 +#define ZINITIX_SUPPORTED_FINGER_NUM 0x0015 +#define ZINITIX_EEPROM_INFO 0x0018 +#define ZINITIX_INITIAL_TOUCH_MODE 0x0019 -#define BT541_TOTAL_NUMBER_OF_X 0x0060 -#define BT541_TOTAL_NUMBER_OF_Y 0x0061 +#define ZINITIX_TOTAL_NUMBER_OF_X 0x0060 +#define ZINITIX_TOTAL_NUMBER_OF_Y 0x0061 -#define BT541_DELAY_RAW_FOR_HOST 0x007f +#define ZINITIX_DELAY_RAW_FOR_HOST 0x007f -#define BT541_BUTTON_SUPPORTED_NUM 0x00B0 -#define BT541_BUTTON_SENSITIVITY 0x00B2 -#define BT541_DUMMY_BUTTON_SENSITIVITY 0X00C8 +#define ZINITIX_BUTTON_SUPPORTED_NUM 0x00B0 +#define ZINITIX_BUTTON_SENSITIVITY 0x00B2 +#define ZINITIX_DUMMY_BUTTON_SENSITIVITY 0X00C8 -#define BT541_X_RESOLUTION 0x00C0 -#define BT541_Y_RESOLUTION 0x00C1 +#define ZINITIX_X_RESOLUTION 0x00C0 +#define ZINITIX_Y_RESOLUTION 0x00C1 -#define BT541_POINT_STATUS_REG 0x0080 -#define BT541_ICON_STATUS_REG 0x00AA +#define ZINITIX_POINT_STATUS_REG 0x0080 +#define ZINITIX_ICON_STATUS_REG 0x00AA -#define BT541_POINT_COORD_REG (BT541_POINT_STATUS_REG + 2) +#define ZINITIX_POINT_COORD_REG (ZINITIX_POINT_STATUS_REG + 2) -#define BT541_AFE_FREQUENCY 0x0100 -#define BT541_DND_N_COUNT 0x0122 -#define BT541_DND_U_COUNT 0x0135 +#define ZINITIX_AFE_FREQUENCY 0x0100 +#define ZINITIX_DND_N_COUNT 0x0122 +#define ZINITIX_DND_U_COUNT 0x0135 -#define BT541_RAWDATA_REG 0x0200 +#define ZINITIX_RAWDATA_REG 0x0200 -#define BT541_EEPROM_INFO_REG 0x0018 +#define ZINITIX_EEPROM_INFO_REG 0x0018 -#define BT541_INT_ENABLE_FLAG 0x00f0 -#define BT541_PERIODICAL_INTERRUPT_INTERVAL 0x00f1 +#define ZINITIX_INT_ENABLE_FLAG 0x00f0 +#define ZINITIX_PERIODICAL_INTERRUPT_INTERVAL 0x00f1 -#define BT541_BTN_WIDTH 0x016d +#define ZINITIX_BTN_WIDTH 0x016d -#define BT541_CHECKSUM_RESULT 0x012c +#define ZINITIX_CHECKSUM_RESULT 0x012c -#define BT541_INIT_FLASH 0x01d0 -#define BT541_WRITE_FLASH 0x01d1 -#define BT541_READ_FLASH 0x01d2 +#define ZINITIX_INIT_FLASH 0x01d0 +#define ZINITIX_WRITE_FLASH 0x01d1 +#define ZINITIX_READ_FLASH 0x01d2 #define ZINITIX_INTERNAL_FLAG_02 0x011e #define ZINITIX_INTERNAL_FLAG_03 0x011f @@ -196,13 +196,13 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) int i; int error; - error = zinitix_write_cmd(client, BT541_SWRESET_CMD); + error = zinitix_write_cmd(client, ZINITIX_SWRESET_CMD); if (error) { dev_err(&client->dev, "Failed to write reset command\n"); return error; } - error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, 0x0); + error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, 0x0); if (error) { dev_err(&client->dev, "Failed to reset interrupt enable flag\n"); @@ -210,32 +210,32 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) } /* initialize */ - error = zinitix_write_u16(client, BT541_X_RESOLUTION, + error = zinitix_write_u16(client, ZINITIX_X_RESOLUTION, bt541->prop.max_x); if (error) return error; - error = zinitix_write_u16(client, BT541_Y_RESOLUTION, + error = zinitix_write_u16(client, ZINITIX_Y_RESOLUTION, bt541->prop.max_y); if (error) return error; - error = zinitix_write_u16(client, BT541_SUPPORTED_FINGER_NUM, + error = zinitix_write_u16(client, ZINITIX_SUPPORTED_FINGER_NUM, MAX_SUPPORTED_FINGER_NUM); if (error) return error; - error = zinitix_write_u16(client, BT541_INITIAL_TOUCH_MODE, + error = zinitix_write_u16(client, ZINITIX_INITIAL_TOUCH_MODE, bt541->zinitix_mode); if (error) return error; - error = zinitix_write_u16(client, BT541_TOUCH_MODE, + error = zinitix_write_u16(client, ZINITIX_TOUCH_MODE, bt541->zinitix_mode); if (error) return error; - error = zinitix_write_u16(client, BT541_INT_ENABLE_FLAG, + error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE | BIT_UP); if (error) @@ -243,7 +243,7 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) /* clear queue */ for (i = 0; i < 10; i++) { - zinitix_write_cmd(client, BT541_CLEAR_INT_STATUS_CMD); + zinitix_write_cmd(client, ZINITIX_CLEAR_INT_STATUS_CMD); udelay(10); } @@ -361,7 +361,7 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) memset(&touch_event, 0, sizeof(struct touch_event)); - error = zinitix_read_data(bt541->client, BT541_POINT_STATUS_REG, + error = zinitix_read_data(bt541->client, ZINITIX_POINT_STATUS_REG, &touch_event, sizeof(struct touch_event)); if (error) { dev_err(&client->dev, "Failed to read in touchpoint struct\n"); @@ -381,7 +381,7 @@ static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler) input_sync(bt541->input_dev); out: - zinitix_write_cmd(bt541->client, BT541_CLEAR_INT_STATUS_CMD); + zinitix_write_cmd(bt541->client, ZINITIX_CLEAR_INT_STATUS_CMD); return IRQ_HANDLED; } |