diff options
Diffstat (limited to 'drivers/ipack/devices/ipoctal.c')
| -rw-r--r-- | drivers/ipack/devices/ipoctal.c | 753 |
1 files changed, 753 insertions, 0 deletions
diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c new file mode 100644 index 000000000000..576d53d92677 --- /dev/null +++ b/drivers/ipack/devices/ipoctal.c @@ -0,0 +1,753 @@ +/** + * ipoctal.c + * + * driver for the GE IP-OCTAL boards + * + * Copyright (C) 2009-2012 CERN (www.cern.ch) + * Author: Nicolas Serafini, EIC2 SA + * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/serial.h> +#include <linux/tty_flip.h> +#include <linux/slab.h> +#include <linux/atomic.h> +#include <linux/io.h> +#include <linux/ipack.h> +#include "ipoctal.h" +#include "scc2698.h" + +#define IP_OCTAL_ID_SPACE_VECTOR 0x41 +#define IP_OCTAL_NB_BLOCKS 4 + +static const struct tty_operations ipoctal_fops; + +struct ipoctal_channel { + struct ipoctal_stats stats; + unsigned int nb_bytes; + wait_queue_head_t queue; + spinlock_t lock; + unsigned int pointer_read; + unsigned int pointer_write; + atomic_t open; + struct tty_port tty_port; + union scc2698_channel __iomem *regs; + union scc2698_block __iomem *block_regs; + unsigned int board_id; + unsigned char *board_write; + u8 isr_rx_rdy_mask; + u8 isr_tx_rdy_mask; +}; + +struct ipoctal { + struct ipack_device *dev; + unsigned int board_id; + struct ipoctal_channel channel[NR_CHANNELS]; + unsigned char write; + struct tty_driver *tty_drv; + u8 __iomem *mem8_space; + u8 __iomem *int_space; +}; + +static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct ipoctal_channel *channel; + + channel = dev_get_drvdata(tty->dev); + + iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); + return 0; +} + +static int ipoctal_open(struct tty_struct *tty, struct file *file) +{ + int res; + struct ipoctal_channel *channel; + + channel = dev_get_drvdata(tty->dev); + + if (atomic_read(&channel->open)) + return -EBUSY; + + tty->driver_data = channel; + + res = tty_port_open(&channel->tty_port, tty, file); + if (res) + return res; + + atomic_inc(&channel->open); + return 0; +} + +static void ipoctal_reset_stats(struct ipoctal_stats *stats) +{ + stats->tx = 0; + stats->rx = 0; + stats->rcv_break = 0; + stats->framing_err = 0; + stats->overrun_err = 0; + stats->parity_err = 0; +} + +static void ipoctal_free_channel(struct ipoctal_channel *channel) +{ + ipoctal_reset_stats(&channel->stats); + channel->pointer_read = 0; + channel->pointer_write = 0; + channel->nb_bytes = 0; +} + +static void ipoctal_close(struct tty_struct *tty, struct file *filp) +{ + struct ipoctal_channel *channel = tty->driver_data; + + tty_port_close(&channel->tty_port, tty, filp); + + if (atomic_dec_and_test(&channel->open)) + ipoctal_free_channel(channel); +} + +static int ipoctal_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct ipoctal_channel *channel = tty->driver_data; + + icount->cts = 0; + icount->dsr = 0; + icount->rng = 0; + icount->dcd = 0; + icount->rx = channel->stats.rx; + icount->tx = channel->stats.tx; + icount->frame = channel->stats.framing_err; + icount->parity = channel->stats.parity_err; + icount->brk = channel->stats.rcv_break; + return 0; +} + +static void ipoctal_irq_rx(struct ipoctal_channel *channel, + struct tty_struct *tty, u8 sr) +{ + unsigned char value; + unsigned char flag = TTY_NORMAL; + u8 isr; + + do { + value = ioread8(&channel->regs->r.rhr); + /* Error: count statistics */ + if (sr & SR_ERROR) { + iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr); + + if (sr & SR_OVERRUN_ERROR) { + channel->stats.overrun_err++; + /* Overrun doesn't affect the current character*/ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + if (sr & SR_PARITY_ERROR) { + channel->stats.parity_err++; + flag = TTY_PARITY; + } + if (sr & SR_FRAMING_ERROR) { + channel->stats.framing_err++; + flag = TTY_FRAME; + } + if (sr & SR_RECEIVED_BREAK) { + iowrite8(CR_CMD_RESET_BREAK_CHANGE, &channel->regs->w.cr); + channel->stats.rcv_break++; + flag = TTY_BREAK; + } + } + tty_insert_flip_char(tty, value, flag); + + /* Check if there are more characters in RX FIFO + * If there are more, the isr register for this channel + * has enabled the RxRDY|FFULL bit. + */ + isr = ioread8(&channel->block_regs->r.isr); + sr = ioread8(&channel->regs->r.sr); + } while (isr & channel->isr_rx_rdy_mask); + + tty_flip_buffer_push(tty); +} + +static void ipoctal_irq_tx(struct ipoctal_channel *channel) +{ + unsigned char value; + unsigned int *pointer_write = &channel->pointer_write; + + if (channel->nb_bytes <= 0) { + channel->nb_bytes = 0; + return; + } + + value = channel->tty_port.xmit_buf[*pointer_write]; + iowrite8(value, &channel->regs->w.thr); + channel->stats.tx++; + (*pointer_write)++; + *pointer_write = *pointer_write % PAGE_SIZE; + channel->nb_bytes--; + + if ((channel->nb_bytes == 0) && + (waitqueue_active(&channel->queue))) { + + if (channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) { + *channel->board_write = 1; + wake_up_interruptible(&channel->queue); + } + } +} + +static void ipoctal_irq_channel(struct ipoctal_channel *channel) +{ + u8 isr, sr; + struct tty_struct *tty; + + /* If there is no client, skip the check */ + if (!atomic_read(&channel->open)) + return; + + tty = tty_port_tty_get(&channel->tty_port); + if (!tty) + return; + /* The HW is organized in pair of channels. See which register we need + * to read from */ + isr = ioread8(&channel->block_regs->r.isr); + sr = ioread8(&channel->regs->r.sr); + + /* In case of RS-485, change from TX to RX when finishing TX. + * Half-duplex. */ + if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) && + (sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) { + iowrite8(CR_DISABLE_TX, &channel->regs->w.cr); + iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr); + iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); + *channel->board_write = 1; + wake_up_interruptible(&channel->queue); + } + + /* RX data */ + if ((isr & channel->isr_rx_rdy_mask) && (sr & SR_RX_READY)) + ipoctal_irq_rx(channel, tty, sr); + + /* TX of each character */ + if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY)) + ipoctal_irq_tx(channel); + + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + +static irqreturn_t ipoctal_irq_handler(void *arg) +{ + unsigned int i; + struct ipoctal *ipoctal = (struct ipoctal *) arg; + + /* Check all channels */ + for (i = 0; i < NR_CHANNELS; i++) + ipoctal_irq_channel(&ipoctal->channel[i]); + + /* Clear the IPack device interrupt */ + readw(ipoctal->int_space + ACK_INT_REQ0); + readw(ipoctal->int_space + ACK_INT_REQ1); + + return IRQ_HANDLED; +} + +static const struct tty_port_operations ipoctal_tty_port_ops = { + .dtr_rts = NULL, + .activate = ipoctal_port_activate, +}; + +static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, + unsigned int slot) +{ + int res; + int i; + struct tty_driver *tty; + char name[20]; + struct ipoctal_channel *channel; + struct ipack_region *region; + void __iomem *addr; + union scc2698_channel __iomem *chan_regs; + union scc2698_block __iomem *block_regs; + + ipoctal->board_id = ipoctal->dev->id_device; + + region = &ipoctal->dev->region[IPACK_IO_SPACE]; + addr = devm_ioremap_nocache(&ipoctal->dev->dev, + region->start, region->size); + if (!addr) { + dev_err(&ipoctal->dev->dev, + "Unable to map slot [%d:%d] IO space!\n", + bus_nr, slot); + return -EADDRNOTAVAIL; + } + /* Save the virtual address to access the registers easily */ + chan_regs = + (union scc2698_channel __iomem *) addr; + block_regs = + (union scc2698_block __iomem *) addr; + + region = &ipoctal->dev->region[IPACK_INT_SPACE]; + ipoctal->int_space = + devm_ioremap_nocache(&ipoctal->dev->dev, + region->start, region->size); + if (!ipoctal->int_space) { + dev_err(&ipoctal->dev->dev, + "Unable to map slot [%d:%d] INT space!\n", + bus_nr, slot); + return -EADDRNOTAVAIL; + } + + region = &ipoctal->dev->region[IPACK_MEM8_SPACE]; + ipoctal->mem8_space = + devm_ioremap_nocache(&ipoctal->dev->dev, + region->start, 0x8000); + if (!addr) { + dev_err(&ipoctal->dev->dev, + "Unable to map slot [%d:%d] MEM8 space!\n", + bus_nr, slot); + return -EADDRNOTAVAIL; + } + + + /* Disable RX and TX before touching anything */ + for (i = 0; i < NR_CHANNELS ; i++) { + struct ipoctal_channel *channel = &ipoctal->channel[i]; + channel->regs = chan_regs + i; + channel->block_regs = block_regs + (i >> 1); + channel->board_write = &ipoctal->write; + channel->board_id = ipoctal->board_id; + if (i & 1) { + channel->isr_tx_rdy_mask = ISR_TxRDY_B; + channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_B; + } else { + channel->isr_tx_rdy_mask = ISR_TxRDY_A; + channel->isr_rx_rdy_mask = ISR_RxRDY_FFULL_A; + } + + iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr); + iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY, + &channel->regs->w.mr); /* mr1 */ + iowrite8(0, &channel->regs->w.mr); /* mr2 */ + iowrite8(TX_CLK_9600 | RX_CLK_9600, &channel->regs->w.csr); + } + + for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) { + iowrite8(ACR_BRG_SET2, &block_regs[i].w.acr); + iowrite8(OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN | OPCR_MPOb_RTSN, + &block_regs[i].w.opcr); + iowrite8(IMR_TxRDY_A | IMR_RxRDY_FFULL_A | IMR_DELTA_BREAK_A | + IMR_TxRDY_B | IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B, + &block_regs[i].w.imr); + } + + /* + * IP-OCTAL has different addresses to copy its IRQ vector. + * Depending of the carrier these addresses are accesible or not. + * More info in the datasheet. + */ + ipoctal->dev->bus->ops->request_irq(ipoctal->dev, + ipoctal_irq_handler, ipoctal); + /* Dummy write */ + iowrite8(1, ipoctal->mem8_space + 1); + + /* Register the TTY device */ + + /* Each IP-OCTAL channel is a TTY port */ + tty = alloc_tty_driver(NR_CHANNELS); + + if (!tty) + return -ENOMEM; + + /* Fill struct tty_driver with ipoctal data */ + tty->owner = THIS_MODULE; + tty->driver_name = KBUILD_MODNAME; + sprintf(name, KBUILD_MODNAME ".%d.%d.", bus_nr, slot); + tty->name = name; + tty->major = 0; + + tty->minor_start = 0; + tty->type = TTY_DRIVER_TYPE_SERIAL; + tty->subtype = SERIAL_TYPE_NORMAL; + tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + tty->init_termios = tty_std_termios; + tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + tty->init_termios.c_ispeed = 9600; + tty->init_termios.c_ospeed = 9600; + + tty_set_operations(tty, &ipoctal_fops); + res = tty_register_driver(tty); + if (res) { + dev_err(&ipoctal->dev->dev, "Can't register tty driver.\n"); + put_tty_driver(tty); + return res; + } + + /* Save struct tty_driver for use it when uninstalling the device */ + ipoctal->tty_drv = tty; + + for (i = 0; i < NR_CHANNELS; i++) { + struct device *tty_dev; + + channel = &ipoctal->channel[i]; + tty_port_init(&channel->tty_port); + tty_port_alloc_xmit_buf(&channel->tty_port); + channel->tty_port.ops = &ipoctal_tty_port_ops; + + ipoctal_reset_stats(&channel->stats); + channel->nb_bytes = 0; + init_waitqueue_head(&channel->queue); + + spin_lock_init(&channel->lock); + channel->pointer_read = 0; + channel->pointer_write = 0; + tty_dev = tty_port_register_device(&channel->tty_port, tty, i, NULL); + if (IS_ERR(tty_dev)) { + dev_err(&ipoctal->dev->dev, "Failed to register tty device.\n"); + tty_port_destroy(&channel->tty_port); + continue; + } + dev_set_drvdata(tty_dev, channel); + + /* + * Enable again the RX. TX will be enabled when + * there is something to send + */ + iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); + } + + return 0; +} + +static inline int ipoctal_copy_write_buffer(struct ipoctal_channel *channel, + const unsigned char *buf, + int count) +{ + unsigned long flags; + int i; + unsigned int *pointer_read = &channel->pointer_read; + + /* Copy the bytes from the user buffer to the internal one */ + for (i = 0; i < count; i++) { + if (i <= (PAGE_SIZE - channel->nb_bytes)) { + spin_lock_irqsave(&channel->lock, flags); + channel->tty_port.xmit_buf[*pointer_read] = buf[i]; + *pointer_read = (*pointer_read + 1) % PAGE_SIZE; + channel->nb_bytes++; + spin_unlock_irqrestore(&channel->lock, flags); + } else { + break; + } + } + return i; +} + +static int ipoctal_write_tty(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct ipoctal_channel *channel = tty->driver_data; + unsigned int char_copied; + + char_copied = ipoctal_copy_write_buffer(channel, buf, count); + + /* As the IP-OCTAL 485 only supports half duplex, do it manually */ + if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) { + iowrite8(CR_DISABLE_RX, &channel->regs->w.cr); + iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr); + } + + /* + * Send a packet and then disable TX to avoid failure after several send + * operations + */ + iowrite8(CR_ENABLE_TX, &channel->regs->w.cr); + wait_event_interruptible(channel->queue, *channel->board_write); + iowrite8(CR_DISABLE_TX, &channel->regs->w.cr); + + *channel->board_write = 0; + return char_copied; +} + +static int ipoctal_write_room(struct tty_struct *tty) +{ + struct ipoctal_channel *channel = tty->driver_data; + + return PAGE_SIZE - channel->nb_bytes; +} + +static int ipoctal_chars_in_buffer(struct tty_struct *tty) +{ + struct ipoctal_channel *channel = tty->driver_data; + + return channel->nb_bytes; +} + +static void ipoctal_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + unsigned int cflag; + unsigned char mr1 = 0; + unsigned char mr2 = 0; + unsigned char csr = 0; + struct ipoctal_channel *channel = tty->driver_data; + speed_t baud; + + cflag = tty->termios.c_cflag; + + /* Disable and reset everything before change the setup */ + iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr); + + /* Set Bits per chars */ + switch (cflag & CSIZE) { + case CS6: + mr1 |= MR1_CHRL_6_BITS; + break; + case CS7: + mr1 |= MR1_CHRL_7_BITS; + break; + case CS8: + default: + mr1 |= MR1_CHRL_8_BITS; + /* By default, select CS8 */ + tty->termios.c_cflag = (cflag & ~CSIZE) | CS8; + break; + } + + /* Set Parity */ + if (cflag & PARENB) + if (cflag & PARODD) + mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD; + else + mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN; + else + mr1 |= MR1_PARITY_OFF; + + /* Mark or space parity is not supported */ + tty->termios.c_cflag &= ~CMSPAR; + + /* Set stop bits */ + if (cflag & CSTOPB) + mr2 |= MR2_STOP_BITS_LENGTH_2; + else + mr2 |= MR2_STOP_BITS_LENGTH_1; + + /* Set the flow control */ + switch (channel->board_id) { + case IPACK1_DEVICE_ID_SBS_OCTAL_232: + if (cflag & CRTSCTS) { + mr1 |= MR1_RxRTS_CONTROL_ON; + mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON; + } else { + mr1 |= MR1_RxRTS_CONTROL_OFF; + mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF; + } + break; + case IPACK1_DEVICE_ID_SBS_OCTAL_422: + mr1 |= MR1_RxRTS_CONTROL_OFF; + mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF; + break; + case IPACK1_DEVICE_ID_SBS_OCTAL_485: + mr1 |= MR1_RxRTS_CONTROL_OFF; + mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF; + break; + default: + return; + break; + } + + baud = tty_get_baud_rate(tty); + tty_termios_encode_baud_rate(&tty->termios, baud, baud); + + /* Set baud rate */ + switch (baud) { + case 75: + csr |= TX_CLK_75 | RX_CLK_75; + break; + case 110: + csr |= TX_CLK_110 | RX_CLK_110; + break; + case 150: + csr |= TX_CLK_150 | RX_CLK_150; + break; + case 300: + csr |= TX_CLK_300 | RX_CLK_300; + break; + case 600: + csr |= TX_CLK_600 | RX_CLK_600; + break; + case 1200: + csr |= TX_CLK_1200 | RX_CLK_1200; + break; + case 1800: + csr |= TX_CLK_1800 | RX_CLK_1800; + break; + case 2000: + csr |= TX_CLK_2000 | RX_CLK_2000; + break; + case 2400: + csr |= TX_CLK_2400 | RX_CLK_2400; + break; + case 4800: + csr |= TX_CLK_4800 | RX_CLK_4800; + break; + case 9600: + csr |= TX_CLK_9600 | RX_CLK_9600; + break; + case 19200: + csr |= TX_CLK_19200 | RX_CLK_19200; + break; + case 38400: + default: + csr |= TX_CLK_38400 | RX_CLK_38400; + /* In case of default, we establish 38400 bps */ + tty_termios_encode_baud_rate(&tty->termios, 38400, 38400); + break; + } + + mr1 |= MR1_ERROR_CHAR; + mr1 |= MR1_RxINT_RxRDY; + + /* Write the control registers */ + iowrite8(mr1, &channel->regs->w.mr); + iowrite8(mr2, &channel->regs->w.mr); + iowrite8(csr, &channel->regs->w.csr); + + /* Enable again the RX */ + iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); +} + +static void ipoctal_hangup(struct tty_struct *tty) +{ + unsigned long flags; + struct ipoctal_channel *channel = tty->driver_data; + + if (channel == NULL) + return; + + spin_lock_irqsave(&channel->lock, flags); + channel->nb_bytes = 0; + channel->pointer_read = 0; + channel->pointer_write = 0; + spin_unlock_irqrestore(&channel->lock, flags); + + tty_port_hangup(&channel->tty_port); + + iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr); + + clear_bit(ASYNCB_INITIALIZED, &channel->tty_port.flags); + wake_up_interruptible(&channel->tty_port.open_wait); +} + +static const struct tty_operations ipoctal_fops = { + .ioctl = NULL, + .open = ipoctal_open, + .close = ipoctal_close, + .write = ipoctal_write_tty, + .set_termios = ipoctal_set_termios, + .write_room = ipoctal_write_room, + .chars_in_buffer = ipoctal_chars_in_buffer, + .get_icount = ipoctal_get_icount, + .hangup = ipoctal_hangup, +}; + +static int ipoctal_probe(struct ipack_device *dev) +{ + int res; + struct ipoctal *ipoctal; + + ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL); + if (ipoctal == NULL) + return -ENOMEM; + + ipoctal->dev = dev; + res = ipoctal_inst_slot(ipoctal, dev->bus->bus_nr, dev->slot); + if (res) + goto out_uninst; + + dev_set_drvdata(&dev->dev, ipoctal); + return 0; + +out_uninst: + kfree(ipoctal); + return res; +} + +static void __ipoctal_remove(struct ipoctal *ipoctal) +{ + int i; + + ipoctal->dev->bus->ops->free_irq(ipoctal->dev); + + for (i = 0; i < NR_CHANNELS; i++) { + struct ipoctal_channel *channel = &ipoctal->channel[i]; + tty_unregister_device(ipoctal->tty_drv, i); + tty_port_free_xmit_buf(&channel->tty_port); + tty_port_destroy(&channel->tty_port); + } + + tty_unregister_driver(ipoctal->tty_drv); + put_tty_driver(ipoctal->tty_drv); + kfree(ipoctal); +} + +static void ipoctal_remove(struct ipack_device *idev) +{ + __ipoctal_remove(dev_get_drvdata(&idev->dev)); +} + +static DEFINE_IPACK_DEVICE_TABLE(ipoctal_ids) = { + { IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS, + IPACK1_DEVICE_ID_SBS_OCTAL_232) }, + { IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS, + IPACK1_DEVICE_ID_SBS_OCTAL_422) }, + { IPACK_DEVICE(IPACK_ID_VERSION_1, IPACK1_VENDOR_ID_SBS, + IPACK1_DEVICE_ID_SBS_OCTAL_485) }, + { 0, }, +}; + +MODULE_DEVICE_TABLE(ipack, ipoctal_ids); + +static const struct ipack_driver_ops ipoctal_drv_ops = { + .probe = ipoctal_probe, + .remove = ipoctal_remove, +}; + +static struct ipack_driver driver = { + .ops = &ipoctal_drv_ops, + .id_table = ipoctal_ids, +}; + +static int __init ipoctal_init(void) +{ + return ipack_driver_register(&driver, THIS_MODULE, KBUILD_MODNAME); +} + +static void __exit ipoctal_exit(void) +{ + ipack_driver_unregister(&driver); +} + +MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver"); +MODULE_LICENSE("GPL"); + +module_init(ipoctal_init); +module_exit(ipoctal_exit); |