1 files changed, 115 insertions, 0 deletions
diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
new file mode 100644
index 000000000000..60ac704d2090
--- /dev/null
+++ b/drivers/irqchip/irq-gic-common.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include "irq-gic-common.h"
+
+void gic_configure_irq(unsigned int irq, unsigned int type,
+		       void __iomem *base, void (*sync_access)(void))
+{
+	u32 enablemask = 1 << (irq % 32);
+	u32 enableoff = (irq / 32) * 4;
+	u32 confmask = 0x2 << ((irq % 16) * 2);
+	u32 confoff = (irq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/*
+	 * Read current configuration register, and insert the config
+	 * for "irq", depending on "type".
+	 */
+	val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		if (sync_access)
+			sync_access();
+		enabled = true;
+	}
+
+	/*
+	 * Write back the new configuration, and possibly re-enable
+	 * the interrupt.
+	 */
+	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	if (sync_access)
+		sync_access();
+}
+
+void __init gic_dist_config(void __iomem *base, int gic_irqs,
+			    void (*sync_access)(void))
+{
+	unsigned int i;
+
+	/*
+	 * Set all global interrupts to be level triggered, active low.
+	 */
+	for (i = 32; i < gic_irqs; i += 16)
+		writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);
+
+	/*
+	 * Set priority on all global interrupts.
+	 */
+	for (i = 32; i < gic_irqs; i += 4)
+		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);
+
+	/*
+	 * Disable all interrupts.  Leave the PPI and SGIs alone
+	 * as they are enabled by redistributor registers.
+	 */
+	for (i = 32; i < gic_irqs; i += 32)
+		writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);
+
+	if (sync_access)
+		sync_access();
+}
+
+void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
+{
+	int i;
+
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
+	writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
+
+	if (sync_access)
+		sync_access();
+}