1 files changed, 112 insertions, 25 deletions

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 829084b568fa..ccc7f823911b 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -24,50 +24,101 @@
 #define REG_PIN_47_SEL	0x08
 #define REG_FILTER_SEL	0x0c
 
+/* use for A1 like chips */
+#define REG_PIN_A1_SEL	0x04
+
 /*
  * Note: The S905X3 datasheet reports that BOTH_EDGE is controlled by
  * bits 24 to 31. Tests on the actual HW show that these bits are
  * stuck at 0. Bits 8 to 15 are responsive and have the expected
  * effect.
  */
-#define REG_EDGE_POL_EDGE(x)	BIT(x)
-#define REG_EDGE_POL_LOW(x)	BIT(16 + (x))
-#define REG_BOTH_EDGE(x)	BIT(8 + (x))
-#define REG_EDGE_POL_MASK(x)    (	\
-		REG_EDGE_POL_EDGE(x) |	\
-		REG_EDGE_POL_LOW(x)  |	\
-		REG_BOTH_EDGE(x))
+#define REG_EDGE_POL_EDGE(params, x)	BIT((params)->edge_single_offset + (x))
+#define REG_EDGE_POL_LOW(params, x)	BIT((params)->pol_low_offset + (x))
+#define REG_BOTH_EDGE(params, x)	BIT((params)->edge_both_offset + (x))
+#define REG_EDGE_POL_MASK(params, x)    (	\
+		REG_EDGE_POL_EDGE(params, x) |	\
+		REG_EDGE_POL_LOW(params, x)  |	\
+		REG_BOTH_EDGE(params, x))
 #define REG_PIN_SEL_SHIFT(x)	(((x) % 4) * 8)
 #define REG_FILTER_SEL_SHIFT(x)	((x) * 4)
 
+struct meson_gpio_irq_controller;
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				    unsigned int channel, unsigned long hwirq);
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl);
+static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				      unsigned int channel,
+				      unsigned long hwirq);
+static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
+
+struct irq_ctl_ops {
+	void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
+				 unsigned int channel, unsigned long hwirq);
+	void (*gpio_irq_init)(struct meson_gpio_irq_controller *ctl);
+};
+
 struct meson_gpio_irq_params {
 	unsigned int nr_hwirq;
 	bool support_edge_both;
+	unsigned int edge_both_offset;
+	unsigned int edge_single_offset;
+	unsigned int pol_low_offset;
+	unsigned int pin_sel_mask;
+	struct irq_ctl_ops ops;
 };
 
+#define INIT_MESON_COMMON(irqs, init, sel)			\
+	.nr_hwirq = irqs,					\
+	.ops = {						\
+		.gpio_irq_init = init,				\
+		.gpio_irq_sel_pin = sel,			\
+	},
+
+#define INIT_MESON8_COMMON_DATA(irqs)				\
+	INIT_MESON_COMMON(irqs, meson_gpio_irq_init_dummy,	\
+			  meson8_gpio_irq_sel_pin)		\
+	.edge_single_offset = 0,				\
+	.pol_low_offset = 16,					\
+	.pin_sel_mask = 0xff,					\
+
+#define INIT_MESON_A1_COMMON_DATA(irqs)				\
+	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,		\
+			  meson_a1_gpio_irq_sel_pin)		\
+	.support_edge_both = true,				\
+	.edge_both_offset = 16,					\
+	.edge_single_offset = 8,				\
+	.pol_low_offset = 0,					\
+	.pin_sel_mask = 0x7f,					\
+
 static const struct meson_gpio_irq_params meson8_params = {
-	.nr_hwirq = 134,
+	INIT_MESON8_COMMON_DATA(134)
 };
 
 static const struct meson_gpio_irq_params meson8b_params = {
-	.nr_hwirq = 119,
+	INIT_MESON8_COMMON_DATA(119)
 };
 
 static const struct meson_gpio_irq_params gxbb_params = {
-	.nr_hwirq = 133,
+	INIT_MESON8_COMMON_DATA(133)
 };
 
 static const struct meson_gpio_irq_params gxl_params = {
-	.nr_hwirq = 110,
+	INIT_MESON8_COMMON_DATA(110)
 };
 
 static const struct meson_gpio_irq_params axg_params = {
-	.nr_hwirq = 100,
+	INIT_MESON8_COMMON_DATA(100)
 };
 
 static const struct meson_gpio_irq_params sm1_params = {
-	.nr_hwirq = 100,
+	INIT_MESON8_COMMON_DATA(100)
 	.support_edge_both = true,
+	.edge_both_offset = 8,
+};
+
+static const struct meson_gpio_irq_params a1_params = {
+	INIT_MESON_A1_COMMON_DATA(62)
 };
 
 static const struct of_device_id meson_irq_gpio_matches[] = {
@@ -78,6 +129,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
+	{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
 	{ }
 };
 
@@ -100,9 +152,43 @@ static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
 	writel_relaxed(tmp, ctl->base + reg);
 }
 
-static unsigned int meson_gpio_irq_channel_to_reg(unsigned int channel)
+static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
+{
+}
+
+static void meson8_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				    unsigned int channel, unsigned long hwirq)
+{
+	unsigned int reg_offset;
+	unsigned int bit_offset;
+
+	reg_offset = (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+	bit_offset = REG_PIN_SEL_SHIFT(channel);
+
+	meson_gpio_irq_update_bits(ctl, reg_offset,
+				   ctl->params->pin_sel_mask << bit_offset,
+				   hwirq << bit_offset);
+}
+
+static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
+				      unsigned int channel,
+				      unsigned long hwirq)
 {
-	return (channel < 4) ? REG_PIN_03_SEL : REG_PIN_47_SEL;
+	unsigned int reg_offset;
+	unsigned int bit_offset;
+
+	bit_offset = ((channel % 2) == 0) ? 0 : 16;
+	reg_offset = REG_PIN_A1_SEL + ((channel / 2) << 2);
+
+	meson_gpio_irq_update_bits(ctl, reg_offset,
+				   ctl->params->pin_sel_mask << bit_offset,
+				   hwirq << bit_offset);
+}
+
+/* For a1 or later chips like a1 there is a switch to enable/disable irq */
+static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl)
+{
+	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL, BIT(31), BIT(31));
 }
 
 static int
@@ -110,7 +196,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
 			       u32 **channel_hwirq)
 {
-	unsigned int reg, idx;
+	unsigned int idx;
 
 	spin_lock(&ctl->lock);
 
@@ -129,10 +215,7 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	 * Setup the mux of the channel to route the signal of the pad
 	 * to the appropriate input of the GIC
 	 */
-	reg = meson_gpio_irq_channel_to_reg(idx);
-	meson_gpio_irq_update_bits(ctl, reg,
-				   0xff << REG_PIN_SEL_SHIFT(idx),
-				   hwirq << REG_PIN_SEL_SHIFT(idx));
+	ctl->params->ops.gpio_irq_sel_pin(ctl, idx, hwirq);
 
 	/*
 	 * Get the hwirq number assigned to this channel through
@@ -173,7 +256,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 {
 	u32 val = 0;
 	unsigned int idx;
+	const struct meson_gpio_irq_params *params;
 
+	params = ctl->params;
 	idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
 
 	/*
@@ -190,22 +275,22 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 	 * precedence over the other edge/polarity settings
 	 */
 	if (type == IRQ_TYPE_EDGE_BOTH) {
-		if (!ctl->params->support_edge_both)
+		if (!params->support_edge_both)
 			return -EINVAL;
 
-		val |= REG_BOTH_EDGE(idx);
+		val |= REG_BOTH_EDGE(params, idx);
 	} else {
 		if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
-			val |= REG_EDGE_POL_EDGE(idx);
+			val |= REG_EDGE_POL_EDGE(params, idx);
 
 		if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
-			val |= REG_EDGE_POL_LOW(idx);
+			val |= REG_EDGE_POL_LOW(params, idx);
 	}
 
 	spin_lock(&ctl->lock);
 
 	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
-				   REG_EDGE_POL_MASK(idx), val);
+				   REG_EDGE_POL_MASK(params, idx), val);
 
 	spin_unlock(&ctl->lock);
 
@@ -371,6 +456,8 @@ static int __init meson_gpio_irq_parse_dt(struct device_node *node,
 		return ret;
 	}
 
+	ctl->params->ops.gpio_irq_init(ctl);
+
 	return 0;
 }