diff options
Diffstat (limited to 'drivers/isdn/hardware/mISDN/hfcsusb.h')
| -rw-r--r-- | drivers/isdn/hardware/mISDN/hfcsusb.h | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h new file mode 100644 index 000000000000..098486b8e8d2 --- /dev/null +++ b/drivers/isdn/hardware/mISDN/hfcsusb.h @@ -0,0 +1,418 @@ +/* + * hfcsusb.h, HFC-S USB mISDN driver + */ + +#ifndef __HFCSUSB_H__ +#define __HFCSUSB_H__ + + +#define DRIVER_NAME "HFC-S_USB" + +#define DBG_HFC_CALL_TRACE 0x00010000 +#define DBG_HFC_FIFO_VERBOSE 0x00020000 +#define DBG_HFC_USB_VERBOSE 0x00100000 +#define DBG_HFC_URB_INFO 0x00200000 +#define DBG_HFC_URB_ERROR 0x00400000 + +#define DEFAULT_TRANSP_BURST_SZ 128 + +#define HFC_CTRL_TIMEOUT 20 /* 5ms timeout writing/reading regs */ +#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */ +#define CLKDEL_NT 0x6c /* CLKDEL in NT mode */ + +/* hfcsusb Layer1 commands */ +#define HFC_L1_ACTIVATE_TE 1 +#define HFC_L1_ACTIVATE_NT 2 +#define HFC_L1_DEACTIVATE_NT 3 +#define HFC_L1_FORCE_DEACTIVATE_TE 4 + +/* cmd FLAGS in HFCUSB_STATES register */ +#define HFCUSB_LOAD_STATE 0x10 +#define HFCUSB_ACTIVATE 0x20 +#define HFCUSB_DO_ACTION 0x40 +#define HFCUSB_NT_G2_G3 0x80 + +/* timers */ +#define NT_ACTIVATION_TIMER 0x01 /* enables NT mode activation Timer */ +#define NT_T1_COUNT 10 + +#define MAX_BCH_SIZE 2048 /* allowed B-channel packet size */ + +#define HFCUSB_RX_THRESHOLD 64 /* threshold for fifo report bit rx */ +#define HFCUSB_TX_THRESHOLD 96 /* threshold for fifo report bit tx */ + +#define HFCUSB_CHIP_ID 0x16 /* Chip ID register index */ +#define HFCUSB_CIRM 0x00 /* cirm register index */ +#define HFCUSB_USB_SIZE 0x07 /* int length register */ +#define HFCUSB_USB_SIZE_I 0x06 /* iso length register */ +#define HFCUSB_F_CROSS 0x0b /* bit order register */ +#define HFCUSB_CLKDEL 0x37 /* bit delay register */ +#define HFCUSB_CON_HDLC 0xfa /* channel connect register */ +#define HFCUSB_HDLC_PAR 0xfb +#define HFCUSB_SCTRL 0x31 /* S-bus control register (tx) */ +#define HFCUSB_SCTRL_E 0x32 /* same for E and special funcs */ +#define HFCUSB_SCTRL_R 0x33 /* S-bus control register (rx) */ +#define HFCUSB_F_THRES 0x0c /* threshold register */ +#define HFCUSB_FIFO 0x0f /* fifo select register */ +#define HFCUSB_F_USAGE 0x1a /* fifo usage register */ +#define HFCUSB_MST_MODE0 0x14 +#define HFCUSB_MST_MODE1 0x15 +#define HFCUSB_P_DATA 0x1f +#define HFCUSB_INC_RES_F 0x0e +#define HFCUSB_B1_SSL 0x20 +#define HFCUSB_B2_SSL 0x21 +#define HFCUSB_B1_RSL 0x24 +#define HFCUSB_B2_RSL 0x25 +#define HFCUSB_STATES 0x30 + + +#define HFCUSB_CHIPID 0x40 /* ID value of HFC-S USB */ + +/* fifo registers */ +#define HFCUSB_NUM_FIFOS 8 /* maximum number of fifos */ +#define HFCUSB_B1_TX 0 /* index for B1 transmit bulk/int */ +#define HFCUSB_B1_RX 1 /* index for B1 receive bulk/int */ +#define HFCUSB_B2_TX 2 +#define HFCUSB_B2_RX 3 +#define HFCUSB_D_TX 4 +#define HFCUSB_D_RX 5 +#define HFCUSB_PCM_TX 6 +#define HFCUSB_PCM_RX 7 + + +#define USB_INT 0 +#define USB_BULK 1 +#define USB_ISOC 2 + +#define ISOC_PACKETS_D 8 +#define ISOC_PACKETS_B 8 +#define ISO_BUFFER_SIZE 128 + +/* defines how much ISO packets are handled in one URB */ +static int iso_packets[8] = + { ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, ISOC_PACKETS_B, + ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D, ISOC_PACKETS_D +}; + + +/* Fifo flow Control for TX ISO */ +#define SINK_MAX 68 +#define SINK_MIN 48 +#define SINK_DMIN 12 +#define SINK_DMAX 18 +#define BITLINE_INF (-96*8) + +/* HFC-S USB register access by Control-URSs */ +#define write_reg_atomic(a, b, c) \ + usb_control_msg((a)->dev, (a)->ctrl_out_pipe, 0, 0x40, (c), (b), \ + 0, 0, HFC_CTRL_TIMEOUT) +#define read_reg_atomic(a, b, c) \ + usb_control_msg((a)->dev, (a)->ctrl_in_pipe, 1, 0xC0, 0, (b), (c), \ + 1, HFC_CTRL_TIMEOUT) +#define HFC_CTRL_BUFSIZE 64 + +struct ctrl_buf { + __u8 hfcs_reg; /* register number */ + __u8 reg_val; /* value to be written (or read) */ +}; + +/* + * URB error codes + * Used to represent a list of values and their respective symbolic names + */ +struct hfcusb_symbolic_list { + const int num; + const char *name; +}; + +static struct hfcusb_symbolic_list urb_errlist[] = { + {-ENOMEM, "No memory for allocation of internal structures"}, + {-ENOSPC, "The host controller's bandwidth is already consumed"}, + {-ENOENT, "URB was canceled by unlink_urb"}, + {-EXDEV, "ISO transfer only partially completed"}, + {-EAGAIN, "Too match scheduled for the future"}, + {-ENXIO, "URB already queued"}, + {-EFBIG, "Too much ISO frames requested"}, + {-ENOSR, "Buffer error (overrun)"}, + {-EPIPE, "Specified endpoint is stalled (device not responding)"}, + {-EOVERFLOW, "Babble (bad cable?)"}, + {-EPROTO, "Bit-stuff error (bad cable?)"}, + {-EILSEQ, "CRC/Timeout"}, + {-ETIMEDOUT, "NAK (device does not respond)"}, + {-ESHUTDOWN, "Device unplugged"}, + {-1, NULL} +}; + +static inline const char * +symbolic(struct hfcusb_symbolic_list list[], const int num) +{ + int i; + for (i = 0; list[i].name != NULL; i++) + if (list[i].num == num) + return list[i].name; + return "<unkown USB Error>"; +} + +/* USB descriptor need to contain one of the following EndPoint combination: */ +#define CNF_4INT3ISO 1 /* 4 INT IN, 3 ISO OUT */ +#define CNF_3INT3ISO 2 /* 3 INT IN, 3 ISO OUT */ +#define CNF_4ISO3ISO 3 /* 4 ISO IN, 3 ISO OUT */ +#define CNF_3ISO3ISO 4 /* 3 ISO IN, 3 ISO OUT */ + +#define EP_NUL 1 /* Endpoint at this position not allowed */ +#define EP_NOP 2 /* all type of endpoints allowed at this position */ +#define EP_ISO 3 /* Isochron endpoint mandatory at this position */ +#define EP_BLK 4 /* Bulk endpoint mandatory at this position */ +#define EP_INT 5 /* Interrupt endpoint mandatory at this position */ + +#define HFC_CHAN_B1 0 +#define HFC_CHAN_B2 1 +#define HFC_CHAN_D 2 +#define HFC_CHAN_E 3 + + +/* + * List of all supported enpoints configiration sets, used to find the + * best matching endpoint configuration within a devices' USB descriptor. + * We need at least 3 RX endpoints, and 3 TX endpoints, either + * INT-in and ISO-out, or ISO-in and ISO-out) + * with 4 RX endpoints even E-Channel logging is possible + */ +static int +validconf[][19] = { + /* INT in, ISO out config */ + {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT, + EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL, + CNF_4INT3ISO, 2, 1}, + {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL, + EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL, + CNF_3INT3ISO, 2, 0}, + /* ISO in, ISO out config */ + {EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, EP_NOP, + EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO, + CNF_4ISO3ISO, 2, 1}, + {EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, + EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL, + CNF_3ISO3ISO, 2, 0}, + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} /* EOL element */ +}; + +/* string description of chosen config */ +char *conf_str[] = { + "4 Interrupt IN + 3 Isochron OUT", + "3 Interrupt IN + 3 Isochron OUT", + "4 Isochron IN + 3 Isochron OUT", + "3 Isochron IN + 3 Isochron OUT" +}; + + +#define LED_OFF 0 /* no LED support */ +#define LED_SCHEME1 1 /* LED standard scheme */ +#define LED_SCHEME2 2 /* not used yet... */ + +#define LED_POWER_ON 1 +#define LED_POWER_OFF 2 +#define LED_S0_ON 3 +#define LED_S0_OFF 4 +#define LED_B1_ON 5 +#define LED_B1_OFF 6 +#define LED_B1_DATA 7 +#define LED_B2_ON 8 +#define LED_B2_OFF 9 +#define LED_B2_DATA 10 + +#define LED_NORMAL 0 /* LEDs are normal */ +#define LED_INVERTED 1 /* LEDs are inverted */ + +/* time in ms to perform a Flashing LED when B-Channel has traffic */ +#define LED_TIME 250 + + + +struct hfcsusb; +struct usb_fifo; + +/* structure defining input+output fifos (interrupt/bulk mode) */ +struct iso_urb { + struct urb *urb; + __u8 buffer[ISO_BUFFER_SIZE]; /* buffer rx/tx USB URB data */ + struct usb_fifo *owner_fifo; /* pointer to owner fifo */ + __u8 indx; /* Fifos's ISO double buffer 0 or 1 ? */ +#ifdef ISO_FRAME_START_DEBUG + int start_frames[ISO_FRAME_START_RING_COUNT]; + __u8 iso_frm_strt_pos; /* index in start_frame[] */ +#endif +}; + +struct usb_fifo { + int fifonum; /* fifo index attached to this structure */ + int active; /* fifo is currently active */ + struct hfcsusb *hw; /* pointer to main structure */ + int pipe; /* address of endpoint */ + __u8 usb_packet_maxlen; /* maximum length for usb transfer */ + unsigned int max_size; /* maximum size of receive/send packet */ + __u8 intervall; /* interrupt interval */ + struct urb *urb; /* transfer structure for usb routines */ + __u8 buffer[128]; /* buffer USB INT OUT URB data */ + int bit_line; /* how much bits are in the fifo? */ + + __u8 usb_transfer_mode; /* switched between ISO and INT */ + struct iso_urb iso[2]; /* two urbs to have one always + one pending */ + + struct dchannel *dch; /* link to hfcsusb_t->dch */ + struct bchannel *bch; /* link to hfcsusb_t->bch */ + struct dchannel *ech; /* link to hfcsusb_t->ech, TODO: E-CHANNEL */ + int last_urblen; /* remember length of last packet */ + __u8 stop_gracefull; /* stops URB retransmission */ +}; + +struct hfcsusb { + struct list_head list; + struct dchannel dch; + struct bchannel bch[2]; + struct dchannel ech; /* TODO : wait for struct echannel ;) */ + + struct usb_device *dev; /* our device */ + struct usb_interface *intf; /* used interface */ + int if_used; /* used interface number */ + int alt_used; /* used alternate config */ + int cfg_used; /* configuration index used */ + int vend_idx; /* index in hfcsusb_idtab */ + int packet_size; + int iso_packet_size; + struct usb_fifo fifos[HFCUSB_NUM_FIFOS]; + + /* control pipe background handling */ + struct ctrl_buf ctrl_buff[HFC_CTRL_BUFSIZE]; + int ctrl_in_idx, ctrl_out_idx, ctrl_cnt; + struct urb *ctrl_urb; + struct usb_ctrlrequest ctrl_write; + struct usb_ctrlrequest ctrl_read; + int ctrl_paksize; + int ctrl_in_pipe, ctrl_out_pipe; + spinlock_t ctrl_lock; /* lock for ctrl */ + spinlock_t lock; + + __u8 threshold_mask; + __u8 led_state; + + __u8 protocol; + int nt_timer; + int open; + __u8 timers; + __u8 initdone; + char name[MISDN_MAX_IDLEN]; +}; + +/* private vendor specific data */ +struct hfcsusb_vdata { + __u8 led_scheme; /* led display scheme */ + signed short led_bits[8]; /* array of 8 possible LED bitmask */ + char *vend_name; /* device name */ +}; + + +#define HFC_MAX_TE_LAYER1_STATE 8 +#define HFC_MAX_NT_LAYER1_STATE 4 + +const char *HFC_TE_LAYER1_STATES[HFC_MAX_TE_LAYER1_STATE + 1] = { + "TE F0 - Reset", + "TE F1 - Reset", + "TE F2 - Sensing", + "TE F3 - Deactivated", + "TE F4 - Awaiting signal", + "TE F5 - Identifying input", + "TE F6 - Synchronized", + "TE F7 - Activated", + "TE F8 - Lost framing", +}; + +const char *HFC_NT_LAYER1_STATES[HFC_MAX_NT_LAYER1_STATE + 1] = { + "NT G0 - Reset", + "NT G1 - Deactive", + "NT G2 - Pending activation", + "NT G3 - Active", + "NT G4 - Pending deactivation", +}; + +/* supported devices */ +static struct usb_device_id hfcsusb_idtab[] = { + { + USB_DEVICE(0x0959, 0x2bd0), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_OFF, {4, 0, 2, 1}, + "ISDN USB TA (Cologne Chip HFC-S USB based)"}), + }, + { + USB_DEVICE(0x0675, 0x1688), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {1, 2, 0, 0}, + "DrayTek miniVigor 128 USB ISDN TA"}), + }, + { + USB_DEVICE(0x07b0, 0x0007), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {0x80, -64, -32, -16}, + "Billion tiny USB ISDN TA 128"}), + }, + { + USB_DEVICE(0x0742, 0x2008), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {4, 0, 2, 1}, + "Stollmann USB TA"}), + }, + { + USB_DEVICE(0x0742, 0x2009), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {4, 0, 2, 1}, + "Aceex USB ISDN TA"}), + }, + { + USB_DEVICE(0x0742, 0x200A), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {4, 0, 2, 1}, + "OEM USB ISDN TA"}), + }, + { + USB_DEVICE(0x08e3, 0x0301), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {2, 0, 1, 4}, + "Olitec USB RNIS"}), + }, + { + USB_DEVICE(0x07fa, 0x0846), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {0x80, -64, -32, -16}, + "Bewan Modem RNIS USB"}), + }, + { + USB_DEVICE(0x07fa, 0x0847), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {0x80, -64, -32, -16}, + "Djinn Numeris USB"}), + }, + { + USB_DEVICE(0x07b0, 0x0006), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {0x80, -64, -32, -16}, + "Twister ISDN TA"}), + }, + { + USB_DEVICE(0x071d, 0x1005), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {0x02, 0, 0x01, 0x04}, + "Eicon DIVA USB 4.0"}), + }, + { + USB_DEVICE(0x0586, 0x0102), + .driver_info = (unsigned long) &((struct hfcsusb_vdata) + {LED_SCHEME1, {0x88, -64, -32, -16}, + "ZyXEL OMNI.NET USB II"}), + }, + { } +}; + +MODULE_DEVICE_TABLE(usb, hfcsusb_idtab); + +#endif /* __HFCSUSB_H__ */ |