diff options
Diffstat (limited to 'drivers/isdn/mISDN/dsp_cmx.c')
-rw-r--r-- | drivers/isdn/mISDN/dsp_cmx.c | 115 |
1 files changed, 75 insertions, 40 deletions
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c index 58c43e429f73..9c7c0d1ba55f 100644 --- a/drivers/isdn/mISDN/dsp_cmx.c +++ b/drivers/isdn/mISDN/dsp_cmx.c @@ -163,8 +163,9 @@ dsp_cmx_debug(struct dsp *dsp) printk(KERN_DEBUG "-----Current DSP\n"); list_for_each_entry(odsp, &dsp_ilist, list) { - printk(KERN_DEBUG "* %s echo=%d txmix=%d", - odsp->name, odsp->echo, odsp->tx_mix); + printk(KERN_DEBUG "* %s hardecho=%d softecho=%d txmix=%d", + odsp->name, odsp->echo.hardware, odsp->echo.software, + odsp->tx_mix); if (odsp->conf) printk(" (Conf %d)", odsp->conf->id); if (dsp == odsp) @@ -177,10 +178,12 @@ dsp_cmx_debug(struct dsp *dsp) list_for_each_entry(member, &conf->mlist, list) { printk(KERN_DEBUG " - member = %s (slot_tx %d, bank_tx %d, " - "slot_rx %d, bank_rx %d hfc_conf %d)%s\n", + "slot_rx %d, bank_rx %d hfc_conf %d " + "tx_data %d rx_is_off %d)%s\n", member->dsp->name, member->dsp->pcm_slot_tx, member->dsp->pcm_bank_tx, member->dsp->pcm_slot_rx, member->dsp->pcm_bank_rx, member->dsp->hfc_conf, + member->dsp->tx_data, member->dsp->rx_is_off, (member->dsp == dsp) ? " *this*" : ""); } } @@ -235,7 +238,7 @@ dsp_cmx_add_conf_member(struct dsp *dsp, struct dsp_conf *conf) member = kzalloc(sizeof(struct dsp_conf_member), GFP_ATOMIC); if (!member) { - printk(KERN_ERR "kmalloc struct dsp_conf_member failed\n"); + printk(KERN_ERR "kzalloc struct dsp_conf_member failed\n"); return -ENOMEM; } member->dsp = dsp; @@ -314,7 +317,7 @@ static struct dsp_conf conf = kzalloc(sizeof(struct dsp_conf), GFP_ATOMIC); if (!conf) { - printk(KERN_ERR "kmalloc struct dsp_conf failed\n"); + printk(KERN_ERR "kzalloc struct dsp_conf failed\n"); return NULL; } INIT_LIST_HEAD(&conf->mlist); @@ -385,7 +388,7 @@ dsp_cmx_hardware(struct dsp_conf *conf, struct dsp *dsp) int freeunits[8]; u_char freeslots[256]; int same_hfc = -1, same_pcm = -1, current_conf = -1, - all_conf = 1; + all_conf = 1, tx_data = 0; /* dsp gets updated (no conf) */ if (!conf) { @@ -409,7 +412,7 @@ one_member: /* process hw echo */ if (dsp->features.pcm_banks < 1) return; - if (!dsp->echo) { + if (!dsp->echo.software && !dsp->echo.hardware) { /* NO ECHO: remove PCM slot if assigned */ if (dsp->pcm_slot_tx >= 0 || dsp->pcm_slot_rx >= 0) { if (dsp_debug & DEBUG_DSP_CMX) @@ -427,10 +430,15 @@ one_member: } return; } + /* echo is enabled, find out if we use soft or hardware */ + dsp->echo.software = dsp->tx_data; + dsp->echo.hardware = 0; /* ECHO: already echo */ if (dsp->pcm_slot_tx >= 0 && dsp->pcm_slot_rx < 0 && - dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2) + dsp->pcm_bank_tx == 2 && dsp->pcm_bank_rx == 2) { + dsp->echo.hardware = 1; return; + } /* ECHO: if slot already assigned */ if (dsp->pcm_slot_tx >= 0) { dsp->pcm_slot_rx = dsp->pcm_slot_tx; @@ -443,6 +451,7 @@ one_member: dsp->pcm_slot_tx); dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN, dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2); + dsp->echo.hardware = 1; return; } /* ECHO: find slot */ @@ -472,6 +481,7 @@ one_member: "%s no slot available for echo\n", __func__); /* no more slots available */ + dsp->echo.software = 1; return; } /* assign free slot */ @@ -485,6 +495,7 @@ one_member: __func__, dsp->name, dsp->pcm_slot_tx); dsp_cmx_hw_message(dsp, MISDN_CTRL_HFC_PCM_CONN, dsp->pcm_slot_tx, 2, dsp->pcm_slot_rx, 2); + dsp->echo.hardware = 1; return; } @@ -554,7 +565,7 @@ conf_software: return; } /* check if member has echo turned on */ - if (member->dsp->echo) { + if (member->dsp->echo.hardware || member->dsp->echo.software) { if (dsp_debug & DEBUG_DSP_CMX) printk(KERN_DEBUG "%s dsp %s cannot form a conf, because " @@ -592,10 +603,9 @@ conf_software: if (member->dsp->tx_data) { if (dsp_debug & DEBUG_DSP_CMX) printk(KERN_DEBUG - "%s dsp %s cannot form a conf, because " - "tx_data is turned on\n", + "%s dsp %s tx_data is turned on\n", __func__, member->dsp->name); - goto conf_software; + tx_data = 1; } /* check if pipeline exists */ if (member->dsp->pipeline.inuse) { @@ -794,7 +804,7 @@ conf_software: nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx, nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx); conf->hardware = 1; - conf->software = 0; + conf->software = tx_data; return; /* if members have one bank (or on the same chip) */ } else { @@ -904,7 +914,7 @@ conf_software: nextm->dsp->pcm_slot_tx, nextm->dsp->pcm_bank_tx, nextm->dsp->pcm_slot_rx, nextm->dsp->pcm_bank_rx); conf->hardware = 1; - conf->software = 0; + conf->software = tx_data; return; } } @@ -937,6 +947,10 @@ conf_software: if (current_conf >= 0) { join_members: list_for_each_entry(member, &conf->mlist, list) { + /* if no conference engine on our chip, change to + * software */ + if (!member->dsp->features.hfc_conf) + goto conf_software; /* in case of hdlc, change to software */ if (member->dsp->hdlc) goto conf_software; @@ -1295,17 +1309,25 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members) int r, rr, t, tt, o_r, o_rr; int preload = 0; struct mISDNhead *hh, *thh; + int tx_data_only = 0; /* don't process if: */ if (!dsp->b_active) { /* if not active */ dsp->last_tx = 0; return; } - if (dsp->pcm_slot_tx >= 0 && /* connected to pcm slot */ + if (((dsp->conf && dsp->conf->hardware) || /* hardware conf */ + dsp->echo.hardware) && /* OR hardware echo */ dsp->tx_R == dsp->tx_W && /* AND no tx-data */ !(dsp->tone.tone && dsp->tone.software)) { /* AND not soft tones */ - dsp->last_tx = 0; - return; + if (!dsp->tx_data) { /* no tx_data for user space required */ + dsp->last_tx = 0; + return; + } + if (dsp->conf && dsp->conf->software && dsp->conf->hardware) + tx_data_only = 1; + if (dsp->conf->software && dsp->echo.hardware) + tx_data_only = 1; } #ifdef CMX_DEBUG @@ -1367,7 +1389,8 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members) while (r != rr && t != tt) { #ifdef CMX_TX_DEBUG if (strlen(debugbuf) < 48) - sprintf(debugbuf+strlen(debugbuf), " %02x", p[t]); + sprintf(debugbuf+strlen(debugbuf), " %02x", + p[t]); #endif *d++ = p[t]; /* write tx_buff */ t = (t+1) & CMX_BUFF_MASK; @@ -1388,7 +1411,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members) /* PROCESS DATA (one member / no conf) */ if (!conf || members <= 1) { /* -> if echo is NOT enabled */ - if (!dsp->echo) { + if (!dsp->echo.software) { /* -> send tx-data if available or use 0-volume */ while (r != rr && t != tt) { *d++ = p[t]; /* write tx_buff */ @@ -1438,7 +1461,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members) o_r = (o_rr - rr + r) & CMX_BUFF_MASK; /* start rx-pointer at current read position*/ /* -> if echo is NOT enabled */ - if (!dsp->echo) { + if (!dsp->echo.software) { /* * -> copy other member's rx-data, * if tx-data is available, mix @@ -1486,7 +1509,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members) #endif /* PROCESS DATA (three or more members) */ /* -> if echo is NOT enabled */ - if (!dsp->echo) { + if (!dsp->echo.software) { /* * -> substract rx-data from conf-data, * if tx-data is available, mix @@ -1550,27 +1573,40 @@ send_packet: * becuase we want what we send, not what we filtered */ if (dsp->tx_data) { - /* PREPARE RESULT */ - txskb = mI_alloc_skb(len, GFP_ATOMIC); - if (!txskb) { - printk(KERN_ERR - "FATAL ERROR in mISDN_dsp.o: " - "cannot alloc %d bytes\n", len); + if (tx_data_only) { + hh->prim = DL_DATA_REQ; + hh->id = 0; + /* queue and trigger */ + skb_queue_tail(&dsp->sendq, nskb); + schedule_work(&dsp->workq); + /* exit because only tx_data is used */ + return; } else { - thh = mISDN_HEAD_P(txskb); - thh->prim = DL_DATA_REQ; - thh->id = 0; - memcpy(skb_put(txskb, len), nskb->data+preload, len); - /* queue (trigger later) */ - skb_queue_tail(&dsp->sendq, txskb); + txskb = mI_alloc_skb(len, GFP_ATOMIC); + if (!txskb) { + printk(KERN_ERR + "FATAL ERROR in mISDN_dsp.o: " + "cannot alloc %d bytes\n", len); + } else { + thh = mISDN_HEAD_P(txskb); + thh->prim = DL_DATA_REQ; + thh->id = 0; + memcpy(skb_put(txskb, len), nskb->data+preload, + len); + /* queue (trigger later) */ + skb_queue_tail(&dsp->sendq, txskb); + } } } + + /* send data only to card, if we don't just calculated tx_data */ /* adjust volume */ if (dsp->tx_volume) dsp_change_volume(nskb, dsp->tx_volume); /* pipeline */ if (dsp->pipeline.inuse) - dsp_pipeline_process_tx(&dsp->pipeline, nskb->data, nskb->len); + dsp_pipeline_process_tx(&dsp->pipeline, nskb->data, + nskb->len); /* crypt */ if (dsp->bf_enable) dsp_bf_encrypt(dsp, nskb->data, nskb->len); @@ -1592,7 +1628,8 @@ dsp_cmx_send(void *arg) struct dsp_conf_member *member; struct dsp *dsp; int mustmix, members; - s32 mixbuffer[MAX_POLL+100], *c; + static s32 mixbuffer[MAX_POLL+100]; + s32 *c; u8 *p, *q; int r, rr; int jittercheck = 0, delay, i; @@ -1890,10 +1927,8 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb) /* no conf */ if (!dsp->conf) { - /* in case of hardware (echo) */ - if (dsp->pcm_slot_tx >= 0) - return; - if (dsp->echo) { + /* in case of software echo */ + if (dsp->echo.software) { nskb = skb_clone(skb, GFP_ATOMIC); if (nskb) { hh = mISDN_HEAD_P(nskb); @@ -1909,7 +1944,7 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb) if (dsp->conf->hardware) return; list_for_each_entry(member, &dsp->conf->mlist, list) { - if (dsp->echo || member->dsp != dsp) { + if (dsp->echo.software || member->dsp != dsp) { nskb = skb_clone(skb, GFP_ATOMIC); if (nskb) { hh = mISDN_HEAD_P(nskb); |