summaryrefslogtreecommitdiffstats
path: root/drivers/macintosh/via-pmu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/macintosh/via-pmu.c')
-rw-r--r--drivers/macintosh/via-pmu.c3147
1 files changed, 3147 insertions, 0 deletions
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
new file mode 100644
index 000000000000..cea1e758eb46
--- /dev/null
+++ b/drivers/macintosh/via-pmu.c
@@ -0,0 +1,3147 @@
+/*
+ * Device driver for the via-pmu on Apple Powermacs.
+ *
+ * The VIA (versatile interface adapter) interfaces to the PMU,
+ * a 6805 microprocessor core whose primary function is to control
+ * battery charging and system power on the PowerBook 3400 and 2400.
+ * The PMU also controls the ADB (Apple Desktop Bus) which connects
+ * to the keyboard and mouse, as well as the non-volatile RAM
+ * and the RTC (real time clock) chip.
+ *
+ * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
+ * Copyright (C) 2001-2002 Benjamin Herrenschmidt
+ *
+ * THIS DRIVER IS BECOMING A TOTAL MESS !
+ * - Cleanup atomically disabling reply to PMU events after
+ * a sleep or a freq. switch
+ * - Move sleep code out of here to pmac_pm, merge into new
+ * common PM infrastructure
+ * - Move backlight code out as well
+ * - Save/Restore PCI space properly
+ *
+ */
+#include <stdarg.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/miscdevice.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/poll.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/cuda.h>
+#include <linux/smp_lock.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/suspend.h>
+#include <linux/syscalls.h>
+#include <linux/cpu.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/sections.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
+
+/* Some compile options */
+#undef SUSPEND_USES_PMU
+#define DEBUG_SLEEP
+#undef HACKED_PCI_SAVE
+
+/* Misc minor number allocated for /dev/pmu */
+#define PMU_MINOR 154
+
+/* How many iterations between battery polls */
+#define BATTERY_POLLING_COUNT 2
+
+static volatile unsigned char __iomem *via;
+
+/* VIA registers - spaced 0x200 bytes apart */
+#define RS 0x200 /* skip between registers */
+#define B 0 /* B-side data */
+#define A RS /* A-side data */
+#define DIRB (2*RS) /* B-side direction (1=output) */
+#define DIRA (3*RS) /* A-side direction (1=output) */
+#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
+#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
+#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
+#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
+#define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */
+#define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */
+#define SR (10*RS) /* Shift register */
+#define ACR (11*RS) /* Auxiliary control register */
+#define PCR (12*RS) /* Peripheral control register */
+#define IFR (13*RS) /* Interrupt flag register */
+#define IER (14*RS) /* Interrupt enable register */
+#define ANH (15*RS) /* A-side data, no handshake */
+
+/* Bits in B data register: both active low */
+#define TACK 0x08 /* Transfer acknowledge (input) */
+#define TREQ 0x10 /* Transfer request (output) */
+
+/* Bits in ACR */
+#define SR_CTRL 0x1c /* Shift register control bits */
+#define SR_EXT 0x0c /* Shift on external clock */
+#define SR_OUT 0x10 /* Shift out if 1 */
+
+/* Bits in IFR and IER */
+#define IER_SET 0x80 /* set bits in IER */
+#define IER_CLR 0 /* clear bits in IER */
+#define SR_INT 0x04 /* Shift register full/empty */
+#define CB2_INT 0x08
+#define CB1_INT 0x10 /* transition on CB1 input */
+
+static volatile enum pmu_state {
+ idle,
+ sending,
+ intack,
+ reading,
+ reading_intr,
+ locked,
+} pmu_state;
+
+static volatile enum int_data_state {
+ int_data_empty,
+ int_data_fill,
+ int_data_ready,
+ int_data_flush
+} int_data_state[2] = { int_data_empty, int_data_empty };
+
+static struct adb_request *current_req;
+static struct adb_request *last_req;
+static struct adb_request *req_awaiting_reply;
+static unsigned char interrupt_data[2][32];
+static int interrupt_data_len[2];
+static int int_data_last;
+static unsigned char *reply_ptr;
+static int data_index;
+static int data_len;
+static volatile int adb_int_pending;
+static volatile int disable_poll;
+static struct adb_request bright_req_1, bright_req_2;
+static struct device_node *vias;
+static int pmu_kind = PMU_UNKNOWN;
+static int pmu_fully_inited = 0;
+static int pmu_has_adb;
+static unsigned char __iomem *gpio_reg = NULL;
+static int gpio_irq = -1;
+static int gpio_irq_enabled = -1;
+static volatile int pmu_suspended = 0;
+static spinlock_t pmu_lock;
+static u8 pmu_intr_mask;
+static int pmu_version;
+static int drop_interrupts;
+#ifdef CONFIG_PMAC_PBOOK
+static int option_lid_wakeup = 1;
+static int sleep_in_progress;
+#endif /* CONFIG_PMAC_PBOOK */
+static unsigned long async_req_locks;
+static unsigned int pmu_irq_stats[11];
+
+static struct proc_dir_entry *proc_pmu_root;
+static struct proc_dir_entry *proc_pmu_info;
+static struct proc_dir_entry *proc_pmu_irqstats;
+static struct proc_dir_entry *proc_pmu_options;
+static int option_server_mode;
+
+#ifdef CONFIG_PMAC_PBOOK
+int pmu_battery_count;
+int pmu_cur_battery;
+unsigned int pmu_power_flags;
+struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
+static int query_batt_timer = BATTERY_POLLING_COUNT;
+static struct adb_request batt_req;
+static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];
+#endif /* CONFIG_PMAC_PBOOK */
+
+#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
+extern int disable_kernel_backlight;
+#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
+
+int __fake_sleep;
+int asleep;
+struct notifier_block *sleep_notifier_list;
+
+#ifdef CONFIG_ADB
+static int adb_dev_map = 0;
+static int pmu_adb_flags;
+
+static int pmu_probe(void);
+static int pmu_init(void);
+static int pmu_send_request(struct adb_request *req, int sync);
+static int pmu_adb_autopoll(int devs);
+static int pmu_adb_reset_bus(void);
+#endif /* CONFIG_ADB */
+
+static int init_pmu(void);
+static int pmu_queue_request(struct adb_request *req);
+static void pmu_start(void);
+static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
+static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
+static int proc_get_info(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+static int proc_get_irqstats(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+#ifdef CONFIG_PMAC_BACKLIGHT
+static int pmu_set_backlight_level(int level, void* data);
+static int pmu_set_backlight_enable(int on, int level, void* data);
+#endif /* CONFIG_PMAC_BACKLIGHT */
+#ifdef CONFIG_PMAC_PBOOK
+static void pmu_pass_intr(unsigned char *data, int len);
+static int proc_get_batt(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+#endif /* CONFIG_PMAC_PBOOK */
+static int proc_read_options(char *page, char **start, off_t off,
+ int count, int *eof, void *data);
+static int proc_write_options(struct file *file, const char __user *buffer,
+ unsigned long count, void *data);
+
+#ifdef CONFIG_ADB
+struct adb_driver via_pmu_driver = {
+ "PMU",
+ pmu_probe,
+ pmu_init,
+ pmu_send_request,
+ pmu_adb_autopoll,
+ pmu_poll_adb,
+ pmu_adb_reset_bus
+};
+#endif /* CONFIG_ADB */
+
+extern void low_sleep_handler(void);
+extern void enable_kernel_altivec(void);
+extern void enable_kernel_fp(void);
+
+#ifdef DEBUG_SLEEP
+int pmu_polled_request(struct adb_request *req);
+int pmu_wink(struct adb_request *req);
+#endif
+
+/*
+ * This table indicates for each PMU opcode:
+ * - the number of data bytes to be sent with the command, or -1
+ * if a length byte should be sent,
+ * - the number of response bytes which the PMU will return, or
+ * -1 if it will send a length byte.
+ */
+static const s8 pmu_data_len[256][2] __openfirmwaredata = {
+/* 0 1 2 3 4 5 6 7 */
+/*00*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*08*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*10*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*18*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
+/*20*/ {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*28*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
+/*30*/ { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*38*/ { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
+/*40*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*48*/ { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
+/*50*/ { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
+/*58*/ { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
+/*60*/ { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*68*/ { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
+/*70*/ { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*78*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
+/*80*/ { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*88*/ { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*90*/ { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*98*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*a0*/ { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
+/*a8*/ { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*b0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*b8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*c0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*c8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+/*d0*/ { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*d8*/ { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
+/*e0*/ {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
+/*e8*/ { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
+/*f0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
+/*f8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
+};
+
+static char *pbook_type[] = {
+ "Unknown PowerBook",
+ "PowerBook 2400/3400/3500(G3)",
+ "PowerBook G3 Series",
+ "1999 PowerBook G3",
+ "Core99"
+};
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+static struct backlight_controller pmu_backlight_controller = {
+ pmu_set_backlight_enable,
+ pmu_set_backlight_level
+};
+#endif /* CONFIG_PMAC_BACKLIGHT */
+
+int __openfirmware
+find_via_pmu(void)
+{
+ if (via != 0)
+ return 1;
+ vias = find_devices("via-pmu");
+ if (vias == 0)
+ return 0;
+ if (vias->next != 0)
+ printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
+
+ if (vias->n_addrs < 1 || vias->n_intrs < 1) {
+ printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
+ vias->n_addrs, vias->n_intrs);
+ if (vias->n_addrs < 1 || vias->n_intrs < 1)
+ return 0;
+ }
+
+ spin_lock_init(&pmu_lock);
+
+ pmu_has_adb = 1;
+
+ pmu_intr_mask = PMU_INT_PCEJECT |
+ PMU_INT_SNDBRT |
+ PMU_INT_ADB |
+ PMU_INT_TICK;
+
+ if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)
+ || device_is_compatible(vias->parent, "ohare")))
+ pmu_kind = PMU_OHARE_BASED;
+ else if (device_is_compatible(vias->parent, "paddington"))
+ pmu_kind = PMU_PADDINGTON_BASED;
+ else if (device_is_compatible(vias->parent, "heathrow"))
+ pmu_kind = PMU_HEATHROW_BASED;
+ else if (device_is_compatible(vias->parent, "Keylargo")
+ || device_is_compatible(vias->parent, "K2-Keylargo")) {
+ struct device_node *gpio, *gpiop;
+
+ pmu_kind = PMU_KEYLARGO_BASED;
+ pmu_has_adb = (find_type_devices("adb") != NULL);
+ pmu_intr_mask = PMU_INT_PCEJECT |
+ PMU_INT_SNDBRT |
+ PMU_INT_ADB |
+ PMU_INT_TICK |
+ PMU_INT_ENVIRONMENT;
+
+ gpiop = find_devices("gpio");
+ if (gpiop && gpiop->n_addrs) {
+ gpio_reg = ioremap(gpiop->addrs->address, 0x10);
+ gpio = find_devices("extint-gpio1");
+ if (gpio == NULL)
+ gpio = find_devices("pmu-interrupt");
+ if (gpio && gpio->parent == gpiop && gpio->n_intrs)
+ gpio_irq = gpio->intrs[0].line;
+ }
+ } else
+ pmu_kind = PMU_UNKNOWN;
+
+ via = ioremap(vias->addrs->address, 0x2000);
+
+ out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
+ out_8(&via[IFR], 0x7f); /* clear IFR */
+
+ pmu_state = idle;
+
+ if (!init_pmu()) {
+ via = NULL;
+ return 0;
+ }
+
+ printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n",
+ PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
+
+ sys_ctrler = SYS_CTRLER_PMU;
+
+ return 1;
+}
+
+#ifdef CONFIG_ADB
+static int __openfirmware
+pmu_probe(void)
+{
+ return vias == NULL? -ENODEV: 0;
+}
+
+static int __init
+pmu_init(void)
+{
+ if (vias == NULL)
+ return -ENODEV;
+ return 0;
+}
+#endif /* CONFIG_ADB */
+
+/*
+ * We can't wait until pmu_init gets called, that happens too late.
+ * It happens after IDE and SCSI initialization, which can take a few
+ * seconds, and by that time the PMU could have given up on us and
+ * turned us off.
+ * Thus this is called with arch_initcall rather than device_initcall.
+ */
+static int __init via_pmu_start(void)
+{
+ if (vias == NULL)
+ return -ENODEV;
+
+ bright_req_1.complete = 1;
+ bright_req_2.complete = 1;
+#ifdef CONFIG_PMAC_PBOOK
+ batt_req.complete = 1;
+#endif
+
+ if (request_irq(vias->intrs[0].line, via_pmu_interrupt, 0, "VIA-PMU",
+ (void *)0)) {
+ printk(KERN_ERR "VIA-PMU: can't get irq %d\n",
+ vias->intrs[0].line);
+ return -EAGAIN;
+ }
+
+ if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
+ if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
+ printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
+ gpio_irq_enabled = 1;
+ }
+
+ /* Enable interrupts */
+ out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
+
+ pmu_fully_inited = 1;
+
+ /* Make sure PMU settle down before continuing. This is _very_ important
+ * since the IDE probe may shut interrupts down for quite a bit of time. If
+ * a PMU communication is pending while this happens, the PMU may timeout
+ * Not that on Core99 machines, the PMU keeps sending us environement
+ * messages, we should find a way to either fix IDE or make it call
+ * pmu_suspend() before masking interrupts. This can also happens while
+ * scolling with some fbdevs.
+ */
+ do {
+ pmu_poll();
+ } while (pmu_state != idle);
+
+ return 0;
+}
+
+arch_initcall(via_pmu_start);
+
+/*
+ * This has to be done after pci_init, which is a subsys_initcall.
+ */
+static int __init via_pmu_dev_init(void)
+{
+ if (vias == NULL)
+ return -ENODEV;
+
+#ifndef CONFIG_PPC64
+ request_OF_resource(vias, 0, NULL);
+#endif
+#ifdef CONFIG_PMAC_BACKLIGHT
+ /* Enable backlight */
+ register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
+#endif /* CONFIG_PMAC_BACKLIGHT */
+
+#ifdef CONFIG_PMAC_PBOOK
+ if (machine_is_compatible("AAPL,3400/2400") ||
+ machine_is_compatible("AAPL,3500")) {
+ int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
+ NULL, PMAC_MB_INFO_MODEL, 0);
+ pmu_battery_count = 1;
+ if (mb == PMAC_TYPE_COMET)
+ pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
+ else
+ pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
+ } else if (machine_is_compatible("AAPL,PowerBook1998") ||
+ machine_is_compatible("PowerBook1,1")) {
+ pmu_battery_count = 2;
+ pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
+ pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
+ } else {
+ struct device_node* prim = find_devices("power-mgt");
+ u32 *prim_info = NULL;
+ if (prim)
+ prim_info = (u32 *)get_property(prim, "prim-info", NULL);
+ if (prim_info) {
+ /* Other stuffs here yet unknown */
+ pmu_battery_count = (prim_info[6] >> 16) & 0xff;
+ pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
+ if (pmu_battery_count > 1)
+ pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
+ }
+ }
+#endif /* CONFIG_PMAC_PBOOK */
+ /* Create /proc/pmu */
+ proc_pmu_root = proc_mkdir("pmu", NULL);
+ if (proc_pmu_root) {
+#ifdef CONFIG_PMAC_PBOOK
+ int i;
+
+ for (i=0; i<pmu_battery_count; i++) {
+ char title[16];
+ sprintf(title, "battery_%d", i);
+ proc_pmu_batt[i] = create_proc_read_entry(title, 0, proc_pmu_root,
+ proc_get_batt, (void *)i);
+ }
+#endif /* CONFIG_PMAC_PBOOK */
+
+ proc_pmu_info = create_proc_read_entry("info", 0, proc_pmu_root,
+ proc_get_info, NULL);
+ proc_pmu_irqstats = create_proc_read_entry("interrupts", 0, proc_pmu_root,
+ proc_get_irqstats, NULL);
+ proc_pmu_options = create_proc_entry("options", 0600, proc_pmu_root);
+ if (proc_pmu_options) {
+ proc_pmu_options->nlink = 1;
+ proc_pmu_options->read_proc = proc_read_options;
+ proc_pmu_options->write_proc = proc_write_options;
+ }
+ }
+ return 0;
+}
+
+device_initcall(via_pmu_dev_init);
+
+static int __openfirmware
+init_pmu(void)
+{
+ int timeout;
+ struct adb_request req;
+
+ out_8(&via[B], via[B] | TREQ); /* negate TREQ */
+ out_8(&via[DIRB], (via[DIRB] | TREQ) & ~TACK); /* TACK in, TREQ out */
+
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
+ timeout = 100000;
+ while (!req.complete) {
+ if (--timeout < 0) {
+ printk(KERN_ERR "init_pmu: no response from PMU\n");
+ return 0;
+ }
+ udelay(10);
+ pmu_poll();
+ }
+
+ /* ack all pending interrupts */
+ timeout = 100000;
+ interrupt_data[0][0] = 1;
+ while (interrupt_data[0][0] || pmu_state != idle) {
+ if (--timeout < 0) {
+ printk(KERN_ERR "init_pmu: timed out acking intrs\n");
+ return 0;
+ }
+ if (pmu_state == idle)
+ adb_int_pending = 1;
+ via_pmu_interrupt(0, NULL, NULL);
+ udelay(10);
+ }
+
+ /* Tell PMU we are ready. */
+ if (pmu_kind == PMU_KEYLARGO_BASED) {
+ pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
+ while (!req.complete)
+ pmu_poll();
+ }
+
+ /* Read PMU version */
+ pmu_request(&req, NULL, 1, PMU_GET_VERSION);
+ pmu_wait_complete(&req);
+ if (req.reply_len > 0)
+ pmu_version = req.reply[0];
+
+ /* Read server mode setting */
+ if (pmu_kind == PMU_KEYLARGO_BASED) {
+ pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
+ PMU_PWR_GET_POWERUP_EVENTS);
+ pmu_wait_complete(&req);
+ if (req.reply_len == 2) {
+ if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT)
+ option_server_mode = 1;
+ printk(KERN_INFO "via-pmu: Server Mode is %s\n",
+ option_server_mode ? "enabled" : "disabled");
+ }
+ }
+ return 1;
+}
+
+int
+pmu_get_model(void)
+{
+ return pmu_kind;
+}
+
+#ifndef CONFIG_PPC64
+static inline void wakeup_decrementer(void)
+{
+ set_dec(tb_ticks_per_jiffy);
+ /* No currently-supported powerbook has a 601,
+ * so use get_tbl, not native
+ */
+ last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
+}
+#endif
+
+static void pmu_set_server_mode(int server_mode)
+{
+ struct adb_request req;
+
+ if (pmu_kind != PMU_KEYLARGO_BASED)
+ return;
+
+ option_server_mode = server_mode;
+ pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS);
+ pmu_wait_complete(&req);
+ if (req.reply_len < 2)
+ return;
+ if (server_mode)
+ pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
+ PMU_PWR_SET_POWERUP_EVENTS,
+ req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
+ else
+ pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
+ PMU_PWR_CLR_POWERUP_EVENTS,
+ req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
+ pmu_wait_complete(&req);
+}
+
+#ifdef CONFIG_PMAC_PBOOK
+
+/* This new version of the code for 2400/3400/3500 powerbooks
+ * is inspired from the implementation in gkrellm-pmu
+ */
+static void __pmac
+done_battery_state_ohare(struct adb_request* req)
+{
+ /* format:
+ * [0] : flags
+ * 0x01 : AC indicator
+ * 0x02 : charging
+ * 0x04 : battery exist
+ * 0x08 :
+ * 0x10 :
+ * 0x20 : full charged
+ * 0x40 : pcharge reset
+ * 0x80 : battery exist
+ *
+ * [1][2] : battery voltage
+ * [3] : CPU temperature
+ * [4] : battery temperature
+ * [5] : current
+ * [6][7] : pcharge
+ * --tkoba
+ */
+ unsigned int bat_flags = PMU_BATT_TYPE_HOOPER;
+ long pcharge, charge, vb, vmax, lmax;
+ long vmax_charging, vmax_charged;
+ long amperage, voltage, time, max;
+ int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
+ NULL, PMAC_MB_INFO_MODEL, 0);
+
+ if (req->reply[0] & 0x01)
+ pmu_power_flags |= PMU_PWR_AC_PRESENT;
+ else
+ pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
+
+ if (mb == PMAC_TYPE_COMET) {
+ vmax_charged = 189;
+ vmax_charging = 213;
+ lmax = 6500;
+ } else {
+ vmax_charged = 330;
+ vmax_charging = 330;
+ lmax = 6500;
+ }
+ vmax = vmax_charged;
+
+ /* If battery installed */
+ if (req->reply[0] & 0x04) {
+ bat_flags |= PMU_BATT_PRESENT;
+ if (req->reply[0] & 0x02)
+ bat_flags |= PMU_BATT_CHARGING;
+ vb = (req->reply[1] << 8) | req->reply[2];
+ voltage = (vb * 265 + 72665) / 10;
+ amperage = req->reply[5];
+ if ((req->reply[0] & 0x01) == 0) {
+ if (amperage > 200)
+ vb += ((amperage - 200) * 15)/100;
+ } else if (req->reply[0] & 0x02) {
+ vb = (vb * 97) / 100;
+ vmax = vmax_charging;
+ }
+ charge = (100 * vb) / vmax;
+ if (req->reply[0] & 0x40) {
+ pcharge = (req->reply[6] << 8) + req->reply[7];
+ if (pcharge > lmax)
+ pcharge = lmax;
+ pcharge *= 100;
+ pcharge = 100 - pcharge / lmax;
+ if (pcharge < charge)
+ charge = pcharge;
+ }
+ if (amperage > 0)
+ time = (charge * 16440) / amperage;
+ else
+ time = 0;
+ max = 100;
+ amperage = -amperage;
+ } else
+ charge = max = amperage = voltage = time = 0;
+
+ pmu_batteries[pmu_cur_battery].flags = bat_flags;
+ pmu_batteries[pmu_cur_battery].charge = charge;
+ pmu_batteries[pmu_cur_battery].max_charge = max;
+ pmu_batteries[pmu_cur_battery].amperage = amperage;
+ pmu_batteries[pmu_cur_battery].voltage = voltage;
+ pmu_batteries[pmu_cur_battery].time_remaining = time;
+
+ clear_bit(0, &async_req_locks);
+}
+
+static void __pmac
+done_battery_state_smart(struct adb_request* req)
+{
+ /* format:
+ * [0] : format of this structure (known: 3,4,5)
+ * [1] : flags
+ *
+ * format 3 & 4:
+ *
+ * [2] : charge
+ * [3] : max charge
+ * [4] : current
+ * [5] : voltage
+ *
+ * format 5:
+ *
+ * [2][3] : charge
+ * [4][5] : max charge
+ * [6][7] : current
+ * [8][9] : voltage
+ */
+
+ unsigned int bat_flags = PMU_BATT_TYPE_SMART;
+ int amperage;
+ unsigned int capa, max, voltage;
+
+ if (req->reply[1] & 0x01)
+ pmu_power_flags |= PMU_PWR_AC_PRESENT;
+ else
+ pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
+
+
+ capa = max = amperage = voltage = 0;
+
+ if (req->reply[1] & 0x04) {
+ bat_flags |= PMU_BATT_PRESENT;
+ switch(req->reply[0]) {
+ case 3:
+ case 4: capa = req->reply[2];
+ max = req->reply[3];
+ amperage = *((signed char *)&req->reply[4]);
+ voltage = req->reply[5];
+ break;
+ case 5: capa = (req->reply[2] << 8) | req->reply[3];
+ max = (req->reply[4] << 8) | req->reply[5];
+ amperage = *((signed short *)&req->reply[6]);
+ voltage = (req->reply[8] << 8) | req->reply[9];
+ break;
+ default:
+ printk(KERN_WARNING "pmu.c : unrecognized battery info, len: %d, %02x %02x %02x %02x\n",
+ req->reply_len, req->reply[0], req->reply[1], req->reply[2], req->reply[3]);
+ break;
+ }
+ }
+
+ if ((req->reply[1] & 0x01) && (amperage > 0))
+ bat_flags |= PMU_BATT_CHARGING;
+
+ pmu_batteries[pmu_cur_battery].flags = bat_flags;
+ pmu_batteries[pmu_cur_battery].charge = capa;
+ pmu_batteries[pmu_cur_battery].max_charge = max;
+ pmu_batteries[pmu_cur_battery].amperage = amperage;
+ pmu_batteries[pmu_cur_battery].voltage = voltage;
+ if (amperage) {
+ if ((req->reply[1] & 0x01) && (amperage > 0))
+ pmu_batteries[pmu_cur_battery].time_remaining
+ = ((max-capa) * 3600) / amperage;
+ else
+ pmu_batteries[pmu_cur_battery].time_remaining
+ = (capa * 3600) / (-amperage);
+ } else
+ pmu_batteries[pmu_cur_battery].time_remaining = 0;
+
+ pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count;
+
+ clear_bit(0, &async_req_locks);
+}
+
+static void __pmac
+query_battery_state(void)
+{
+ if (test_and_set_bit(0, &async_req_locks))
+ return;
+ if (pmu_kind == PMU_OHARE_BASED)
+ pmu_request(&batt_req, done_battery_state_ohare,
+ 1, PMU_BATTERY_STATE);
+ else
+ pmu_request(&batt_req, done_battery_state_smart,
+ 2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
+}
+
+#endif /* CONFIG_PMAC_PBOOK */
+
+static int __pmac
+proc_get_info(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ char* p = page;
+
+ p += sprintf(p, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
+ p += sprintf(p, "PMU firmware version : %02x\n", pmu_version);
+#ifdef CONFIG_PMAC_PBOOK
+ p += sprintf(p, "AC Power : %d\n",
+ ((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0));
+ p += sprintf(p, "Battery count : %d\n", pmu_battery_count);
+#endif /* CONFIG_PMAC_PBOOK */
+
+ return p - page;
+}
+
+static int __pmac
+proc_get_irqstats(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int i;
+ char* p = page;
+ static const char *irq_names[] = {
+ "Total CB1 triggered events",
+ "Total GPIO1 triggered events",
+ "PC-Card eject button",
+ "Sound/Brightness button",
+ "ADB message",
+ "Battery state change",
+ "Environment interrupt",
+ "Tick timer",
+ "Ghost interrupt (zero len)",
+ "Empty interrupt (empty mask)",
+ "Max irqs in a row"
+ };
+
+ for (i=0; i<11; i++) {
+ p += sprintf(p, " %2u: %10u (%s)\n",
+ i, pmu_irq_stats[i], irq_names[i]);
+ }
+ return p - page;
+}
+
+#ifdef CONFIG_PMAC_PBOOK
+static int __pmac
+proc_get_batt(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ int batnum = (int)data;
+ char *p = page;
+
+ p += sprintf(p, "\n");
+ p += sprintf(p, "flags : %08x\n",
+ pmu_batteries[batnum].flags);
+ p += sprintf(p, "charge : %d\n",
+ pmu_batteries[batnum].charge);
+ p += sprintf(p, "max_charge : %d\n",
+ pmu_batteries[batnum].max_charge);
+ p += sprintf(p, "current : %d\n",
+ pmu_batteries[batnum].amperage);
+ p += sprintf(p, "voltage : %d\n",
+ pmu_batteries[batnum].voltage);
+ p += sprintf(p, "time rem. : %d\n",
+ pmu_batteries[batnum].time_remaining);
+
+ return p - page;
+}
+#endif /* CONFIG_PMAC_PBOOK */
+
+static int __pmac
+proc_read_options(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ char *p = page;
+
+#ifdef CONFIG_PMAC_PBOOK
+ if (pmu_kind == PMU_KEYLARGO_BASED &&
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
+ p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
+#endif /* CONFIG_PMAC_PBOOK */
+ if (pmu_kind == PMU_KEYLARGO_BASED)
+ p += sprintf(p, "server_mode=%d\n", option_server_mode);
+
+ return p - page;
+}
+
+static int __pmac
+proc_write_options(struct file *file, const char __user *buffer,
+ unsigned long count, void *data)
+{
+ char tmp[33];
+ char *label, *val;
+ unsigned long fcount = count;
+
+ if (!count)
+ return -EINVAL;
+ if (count > 32)
+ count = 32;
+ if (copy_from_user(tmp, buffer, count))
+ return -EFAULT;
+ tmp[count] = 0;
+
+ label = tmp;
+ while(*label == ' ')
+ label++;
+ val = label;
+ while(*val && (*val != '=')) {
+ if (*val == ' ')
+ *val = 0;
+ val++;
+ }
+ if ((*val) == 0)
+ return -EINVAL;
+ *(val++) = 0;
+ while(*val == ' ')
+ val++;
+#ifdef CONFIG_PMAC_PBOOK
+ if (pmu_kind == PMU_KEYLARGO_BASED &&
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
+ if (!strcmp(label, "lid_wakeup"))
+ option_lid_wakeup = ((*val) == '1');
+#endif /* CONFIG_PMAC_PBOOK */
+ if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) {
+ int new_value;
+ new_value = ((*val) == '1');
+ if (new_value != option_server_mode)
+ pmu_set_server_mode(new_value);
+ }
+ return fcount;
+}
+
+#ifdef CONFIG_ADB
+/* Send an ADB command */
+static int __pmac
+pmu_send_request(struct adb_request *req, int sync)
+{
+ int i, ret;
+
+ if ((vias == NULL) || (!pmu_fully_inited)) {
+ req->complete = 1;
+ return -ENXIO;
+ }
+
+ ret = -EINVAL;
+
+ switch (req->data[0]) {
+ case PMU_PACKET:
+ for (i = 0; i < req->nbytes - 1; ++i)
+ req->data[i] = req->data[i+1];
+ --req->nbytes;
+ if (pmu_data_len[req->data[0]][1] != 0) {
+ req->reply[0] = ADB_RET_OK;
+ req->reply_len = 1;
+ } else
+ req->reply_len = 0;
+ ret = pmu_queue_request(req);
+ break;
+ case CUDA_PACKET:
+ switch (req->data[1]) {
+ case CUDA_GET_TIME:
+ if (req->nbytes != 2)
+ break;
+ req->data[0] = PMU_READ_RTC;
+ req->nbytes = 1;
+ req->reply_len = 3;
+ req->reply[0] = CUDA_PACKET;
+ req->reply[1] = 0;
+ req->reply[2] = CUDA_GET_TIME;
+ ret = pmu_queue_request(req);
+ break;
+ case CUDA_SET_TIME:
+ if (req->nbytes != 6)
+ break;
+ req->data[0] = PMU_SET_RTC;
+ req->nbytes = 5;
+ for (i = 1; i <= 4; ++i)
+ req->data[i] = req->data[i+1];
+ req->reply_len = 3;
+ req->reply[0] = CUDA_PACKET;
+ req->reply[1] = 0;
+ req->reply[2] = CUDA_SET_TIME;
+ ret = pmu_queue_request(req);
+ break;
+ }
+ break;
+ case ADB_PACKET:
+ if (!pmu_has_adb)
+ return -ENXIO;
+ for (i = req->nbytes - 1; i > 1; --i)
+ req->data[i+2] = req->data[i];
+ req->data[3] = req->nbytes - 2;
+ req->data[2] = pmu_adb_flags;
+ /*req->data[1] = req->data[1];*/
+ req->data[0] = PMU_ADB_CMD;
+ req->nbytes += 2;
+ req->reply_expected = 1;
+ req->reply_len = 0;
+ ret = pmu_queue_request(req);
+ break;
+ }
+ if (ret) {
+ req->complete = 1;
+ return ret;
+ }
+
+ if (sync)
+ while (!req->complete)
+ pmu_poll();
+
+ return 0;
+}
+
+/* Enable/disable autopolling */
+static int __pmac
+pmu_adb_autopoll(int devs)
+{
+ struct adb_request req;
+
+ if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+ return -ENXIO;
+
+ if (devs) {
+ adb_dev_map = devs;
+ pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
+ adb_dev_map >> 8, adb_dev_map);
+ pmu_adb_flags = 2;
+ } else {
+ pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
+ pmu_adb_flags = 0;
+ }
+ while (!req.complete)
+ pmu_poll();
+ return 0;
+}
+
+/* Reset the ADB bus */
+static int __pmac
+pmu_adb_reset_bus(void)
+{
+ struct adb_request req;
+ int save_autopoll = adb_dev_map;
+
+ if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+ return -ENXIO;
+
+ /* anyone got a better idea?? */
+ pmu_adb_autopoll(0);
+
+ req.nbytes = 5;
+ req.done = NULL;
+ req.data[0] = PMU_ADB_CMD;
+ req.data[1] = 0;
+ req.data[2] = ADB_BUSRESET;
+ req.data[3] = 0;
+ req.data[4] = 0;
+ req.reply_len = 0;
+ req.reply_expected = 1;
+ if (pmu_queue_request(&req) != 0) {
+ printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
+ return -EIO;
+ }
+ pmu_wait_complete(&req);
+
+ if (save_autopoll != 0)
+ pmu_adb_autopoll(save_autopoll);
+
+ return 0;
+}
+#endif /* CONFIG_ADB */
+
+/* Construct and send a pmu request */
+int __openfirmware
+pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
+ int nbytes, ...)
+{
+ va_list list;
+ int i;
+
+ if (vias == NULL)
+ return -ENXIO;
+
+ if (nbytes < 0 || nbytes > 32) {
+ printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
+ req->complete = 1;
+ return -EINVAL;
+ }
+ req->nbytes = nbytes;
+ req->done = done;
+ va_start(list, nbytes);
+ for (i = 0; i < nbytes; ++i)
+ req->data[i] = va_arg(list, int);
+ va_end(list);
+ req->reply_len = 0;
+ req->reply_expected = 0;
+ return pmu_queue_request(req);
+}
+
+int __pmac
+pmu_queue_request(struct adb_request *req)
+{
+ unsigned long flags;
+ int nsend;
+
+ if (via == NULL) {
+ req->complete = 1;
+ return -ENXIO;
+ }
+ if (req->nbytes <= 0) {
+ req->complete = 1;
+ return 0;
+ }
+ nsend = pmu_data_len[req->data[0]][0];
+ if (nsend >= 0 && req->nbytes != nsend + 1) {
+ req->complete = 1;
+ return -EINVAL;
+ }
+
+ req->next = NULL;
+ req->sent = 0;
+ req->complete = 0;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ if (current_req != 0) {
+ last_req->next = req;
+ last_req = req;
+ } else {
+ current_req = req;
+ last_req = req;
+ if (pmu_state == idle)
+ pmu_start();
+ }
+ spin_unlock_irqrestore(&pmu_lock, flags);
+
+ return 0;
+}
+
+static inline void
+wait_for_ack(void)
+{
+ /* Sightly increased the delay, I had one occurrence of the message
+ * reported
+ */
+ int timeout = 4000;
+ while ((in_8(&via[B]) & TACK) == 0) {
+ if (--timeout < 0) {
+ printk(KERN_ERR "PMU not responding (!ack)\n");
+ return;
+ }
+ udelay(10);
+ }
+}
+
+/* New PMU seems to be very sensitive to those timings, so we make sure
+ * PCI is flushed immediately */
+static inline void
+send_byte(int x)
+{
+ volatile unsigned char __iomem *v = via;
+
+ out_8(&v[ACR], in_8(&v[ACR]) | SR_OUT | SR_EXT);
+ out_8(&v[SR], x);
+ out_8(&v[B], in_8(&v[B]) & ~TREQ); /* assert TREQ */
+ (void)in_8(&v[B]);
+}
+
+static inline void
+recv_byte(void)
+{
+ volatile unsigned char __iomem *v = via;
+
+ out_8(&v[ACR], (in_8(&v[ACR]) & ~SR_OUT) | SR_EXT);
+ in_8(&v[SR]); /* resets SR */
+ out_8(&v[B], in_8(&v[B]) & ~TREQ);
+ (void)in_8(&v[B]);
+}
+
+static inline void
+pmu_done(struct adb_request *req)
+{
+ void (*done)(struct adb_request *) = req->done;
+ mb();
+ req->complete = 1;
+ /* Here, we assume that if the request has a done member, the
+ * struct request will survive to setting req->complete to 1
+ */
+ if (done)
+ (*done)(req);
+}
+
+static void __pmac
+pmu_start(void)
+{
+ struct adb_request *req;
+
+ /* assert pmu_state == idle */
+ /* get the packet to send */
+ req = current_req;
+ if (req == 0 || pmu_state != idle
+ || (/*req->reply_expected && */req_awaiting_reply))
+ return;
+
+ pmu_state = sending;
+ data_index = 1;
+ data_len = pmu_data_len[req->data[0]][0];
+
+ /* Sounds safer to make sure ACK is high before writing. This helped
+ * kill a problem with ADB and some iBooks
+ */
+ wait_for_ack();
+ /* set the shift register to shift out and send a byte */
+ send_byte(req->data[0]);
+}
+
+void __openfirmware
+pmu_poll(void)
+{
+ if (!via)
+ return;
+ if (disable_poll)
+ return;
+ via_pmu_interrupt(0, NULL, NULL);
+}
+
+void __openfirmware
+pmu_poll_adb(void)
+{
+ if (!via)
+ return;
+ if (disable_poll)
+ return;
+ /* Kicks ADB read when PMU is suspended */
+ adb_int_pending = 1;
+ do {
+ via_pmu_interrupt(0, NULL, NULL);
+ } while (pmu_suspended && (adb_int_pending || pmu_state != idle
+ || req_awaiting_reply));
+}
+
+void __openfirmware
+pmu_wait_complete(struct adb_request *req)
+{
+ if (!via)
+ return;
+ while((pmu_state != idle && pmu_state != locked) || !req->complete)
+ via_pmu_interrupt(0, NULL, NULL);
+}
+
+/* This function loops until the PMU is idle and prevents it from
+ * anwsering to ADB interrupts. pmu_request can still be called.
+ * This is done to avoid spurrious shutdowns when we know we'll have
+ * interrupts switched off for a long time
+ */
+void __openfirmware
+pmu_suspend(void)
+{
+ unsigned long flags;
+#ifdef SUSPEND_USES_PMU
+ struct adb_request *req;
+#endif
+ if (!via)
+ return;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ pmu_suspended++;
+ if (pmu_suspended > 1) {
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ return;
+ }
+
+ do {
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ if (req_awaiting_reply)
+ adb_int_pending = 1;
+ via_pmu_interrupt(0, NULL, NULL);
+ spin_lock_irqsave(&pmu_lock, flags);
+ if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
+#ifdef SUSPEND_USES_PMU
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ while(!req.complete)
+ pmu_poll();
+#else /* SUSPEND_USES_PMU */
+ if (gpio_irq >= 0)
+ disable_irq_nosync(gpio_irq);
+ out_8(&via[IER], CB1_INT | IER_CLR);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+#endif /* SUSPEND_USES_PMU */
+ break;
+ }
+ } while (1);
+}
+
+void __openfirmware
+pmu_resume(void)
+{
+ unsigned long flags;
+
+ if (!via || (pmu_suspended < 1))
+ return;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ pmu_suspended--;
+ if (pmu_suspended > 0) {
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ return;
+ }
+ adb_int_pending = 1;
+#ifdef SUSPEND_USES_PMU
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ while(!req.complete)
+ pmu_poll();
+#else /* SUSPEND_USES_PMU */
+ if (gpio_irq >= 0)
+ enable_irq(gpio_irq);
+ out_8(&via[IER], CB1_INT | IER_SET);
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ pmu_poll();
+#endif /* SUSPEND_USES_PMU */
+}
+
+/* Interrupt data could be the result data from an ADB cmd */
+static void __pmac
+pmu_handle_data(unsigned char *data, int len, struct pt_regs *regs)
+{
+ unsigned char ints, pirq;
+ int i = 0;
+
+ asleep = 0;
+ if (drop_interrupts || len < 1) {
+ adb_int_pending = 0;
+ pmu_irq_stats[8]++;
+ return;
+ }
+
+ /* Get PMU interrupt mask */
+ ints = data[0];
+
+ /* Record zero interrupts for stats */
+ if (ints == 0)
+ pmu_irq_stats[9]++;
+
+ /* Hack to deal with ADB autopoll flag */
+ if (ints & PMU_INT_ADB)
+ ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
+
+next:
+
+ if (ints == 0) {
+ if (i > pmu_irq_stats[10])
+ pmu_irq_stats[10] = i;
+ return;
+ }
+
+ for (pirq = 0; pirq < 8; pirq++)
+ if (ints & (1 << pirq))
+ break;
+ pmu_irq_stats[pirq]++;
+ i++;
+ ints &= ~(1 << pirq);
+
+ /* Note: for some reason, we get an interrupt with len=1,
+ * data[0]==0 after each normal ADB interrupt, at least
+ * on the Pismo. Still investigating... --BenH
+ */
+ if ((1 << pirq) & PMU_INT_ADB) {
+ if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
+ struct adb_request *req = req_awaiting_reply;
+ if (req == 0) {
+ printk(KERN_ERR "PMU: extra ADB reply\n");
+ return;
+ }
+ req_awaiting_reply = NULL;
+ if (len <= 2)
+ req->reply_len = 0;
+ else {
+ memcpy(req->reply, data + 1, len - 1);
+ req->reply_len = len - 1;
+ }
+ pmu_done(req);
+ } else {
+#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
+ if (len == 4 && data[1] == 0x2c) {
+ extern int xmon_wants_key, xmon_adb_keycode;
+ if (xmon_wants_key) {
+ xmon_adb_keycode = data[2];
+ return;
+ }
+ }
+#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
+#ifdef CONFIG_ADB
+ /*
+ * XXX On the [23]400 the PMU gives us an up
+ * event for keycodes 0x74 or 0x75 when the PC
+ * card eject buttons are released, so we
+ * ignore those events.
+ */
+ if (!(pmu_kind == PMU_OHARE_BASED && len == 4
+ && data[1] == 0x2c && data[3] == 0xff
+ && (data[2] & ~1) == 0xf4))
+ adb_input(data+1, len-1, regs, 1);
+#endif /* CONFIG_ADB */
+ }
+ }
+ /* Sound/brightness button pressed */
+ else if ((1 << pirq) & PMU_INT_SNDBRT) {
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (len == 3)
+#ifdef CONFIG_INPUT_ADBHID
+ if (!disable_kernel_backlight)
+#endif /* CONFIG_INPUT_ADBHID */
+ set_backlight_level(data[1] >> 4);
+#endif /* CONFIG_PMAC_BACKLIGHT */
+ }
+ /* Tick interrupt */
+ else if ((1 << pirq) & PMU_INT_TICK) {
+#ifdef CONFIG_PMAC_PBOOK
+ /* Environement or tick interrupt, query batteries */
+ if (pmu_battery_count) {
+ if ((--query_batt_timer) == 0) {
+ query_battery_state();
+ query_batt_timer = BATTERY_POLLING_COUNT;
+ }
+ }
+ }
+ else if ((1 << pirq) & PMU_INT_ENVIRONMENT) {
+ if (pmu_battery_count)
+ query_battery_state();
+ pmu_pass_intr(data, len);
+ } else {
+ pmu_pass_intr(data, len);
+#endif /* CONFIG_PMAC_PBOOK */
+ }
+ goto next;
+}
+
+static struct adb_request* __pmac
+pmu_sr_intr(struct pt_regs *regs)
+{
+ struct adb_request *req;
+ int bite = 0;
+
+ if (via[B] & TREQ) {
+ printk(KERN_ERR "PMU: spurious SR intr (%x)\n", via[B]);
+ out_8(&via[IFR], SR_INT);
+ return NULL;
+ }
+ /* The ack may not yet be low when we get the interrupt */
+ while ((in_8(&via[B]) & TACK) != 0)
+ ;
+
+ /* if reading grab the byte, and reset the interrupt */
+ if (pmu_state == reading || pmu_state == reading_intr)
+ bite = in_8(&via[SR]);
+
+ /* reset TREQ and wait for TACK to go high */
+ out_8(&via[B], in_8(&via[B]) | TREQ);
+ wait_for_ack();
+
+ switch (pmu_state) {
+ case sending:
+ req = current_req;
+ if (data_len < 0) {
+ data_len = req->nbytes - 1;
+ send_byte(data_len);
+ break;
+ }
+ if (data_index <= data_len) {
+ send_byte(req->data[data_index++]);
+ break;
+ }
+ req->sent = 1;
+ data_len = pmu_data_len[req->data[0]][1];
+ if (data_len == 0) {
+ pmu_state = idle;
+ current_req = req->next;
+ if (req->reply_expected)
+ req_awaiting_reply = req;
+ else
+ return req;
+ } else {
+ pmu_state = reading;
+ data_index = 0;
+ reply_ptr = req->reply + req->reply_len;
+ recv_byte();
+ }
+ break;
+
+ case intack:
+ data_index = 0;
+ data_len = -1;
+ pmu_state = reading_intr;
+ reply_ptr = interrupt_data[int_data_last];
+ recv_byte();
+ if (gpio_irq >= 0 && !gpio_irq_enabled) {
+ enable_irq(gpio_irq);
+ gpio_irq_enabled = 1;
+ }
+ break;
+
+ case reading:
+ case reading_intr:
+ if (data_len == -1) {
+ data_len = bite;
+ if (bite > 32)
+ printk(KERN_ERR "PMU: bad reply len %d\n", bite);
+ } else if (data_index < 32) {
+ reply_ptr[data_index++] = bite;
+ }
+ if (data_index < data_len) {
+ recv_byte();
+ break;
+ }
+
+ if (pmu_state == reading_intr) {
+ pmu_state = idle;
+ int_data_state[int_data_last] = int_data_ready;
+ interrupt_data_len[int_data_last] = data_len;
+ } else {
+ req = current_req;
+ /*
+ * For PMU sleep and freq change requests, we lock the
+ * PMU until it's explicitely unlocked. This avoids any
+ * spurrious event polling getting in
+ */
+ current_req = req->next;
+ req->reply_len += data_index;
+ if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED)
+ pmu_state = locked;
+ else
+ pmu_state = idle;
+ return req;
+ }
+ break;
+
+ default:
+ printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n",
+ pmu_state);
+ }
+ return NULL;
+}
+
+static irqreturn_t __pmac
+via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs)
+{
+ unsigned long flags;
+ int intr;
+ int nloop = 0;
+ int int_data = -1;
+ struct adb_request *req = NULL;
+ int handled = 0;
+
+ /* This is a bit brutal, we can probably do better */
+ spin_lock_irqsave(&pmu_lock, flags);
+ ++disable_poll;
+
+ for (;;) {
+ intr = in_8(&via[IFR]) & (SR_INT | CB1_INT);
+ if (intr == 0)
+ break;
+ handled = 1;
+ if (++nloop > 1000) {
+ printk(KERN_DEBUG "PMU: stuck in intr loop, "
+ "intr=%x, ier=%x pmu_state=%d\n",
+ intr, in_8(&via[IER]), pmu_state);
+ break;
+ }
+ out_8(&via[IFR], intr);
+ if (intr & CB1_INT) {
+ adb_int_pending = 1;
+ pmu_irq_stats[0]++;
+ }
+ if (intr & SR_INT) {
+ req = pmu_sr_intr(regs);
+ if (req)
+ break;
+ }
+ }
+
+recheck:
+ if (pmu_state == idle) {
+ if (adb_int_pending) {
+ if (int_data_state[0] == int_data_empty)
+ int_data_last = 0;
+ else if (int_data_state[1] == int_data_empty)
+ int_data_last = 1;
+ else
+ goto no_free_slot;
+ pmu_state = intack;
+ int_data_state[int_data_last] = int_data_fill;
+ /* Sounds safer to make sure ACK is high before writing.
+ * This helped kill a problem with ADB and some iBooks
+ */
+ wait_for_ack();
+ send_byte(PMU_INT_ACK);
+ adb_int_pending = 0;
+ } else if (current_req)
+ pmu_start();
+ }
+no_free_slot:
+ /* Mark the oldest buffer for flushing */
+ if (int_data_state[!int_data_last] == int_data_ready) {
+ int_data_state[!int_data_last] = int_data_flush;
+ int_data = !int_data_last;
+ } else if (int_data_state[int_data_last] == int_data_ready) {
+ int_data_state[int_data_last] = int_data_flush;
+ int_data = int_data_last;
+ }
+ --disable_poll;
+ spin_unlock_irqrestore(&pmu_lock, flags);
+
+ /* Deal with completed PMU requests outside of the lock */
+ if (req) {
+ pmu_done(req);
+ req = NULL;
+ }
+
+ /* Deal with interrupt datas outside of the lock */
+ if (int_data >= 0) {
+ pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data], regs);
+ spin_lock_irqsave(&pmu_lock, flags);
+ ++disable_poll;
+ int_data_state[int_data] = int_data_empty;
+ int_data = -1;
+ goto recheck;
+ }
+
+ return IRQ_RETVAL(handled);
+}
+
+void __pmac
+pmu_unlock(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pmu_lock, flags);
+ if (pmu_state == locked)
+ pmu_state = idle;
+ adb_int_pending = 1;
+ spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+
+static irqreturn_t __pmac
+gpio1_interrupt(int irq, void *arg, struct pt_regs *regs)
+{
+ unsigned long flags;
+
+ if ((in_8(gpio_reg + 0x9) & 0x02) == 0) {
+ spin_lock_irqsave(&pmu_lock, flags);
+ if (gpio_irq_enabled > 0) {
+ disable_irq_nosync(gpio_irq);
+ gpio_irq_enabled = 0;
+ }
+ pmu_irq_stats[1]++;
+ adb_int_pending = 1;
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ via_pmu_interrupt(0, NULL, NULL);
+ return IRQ_HANDLED;
+ }
+ return IRQ_NONE;
+}
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+static int backlight_to_bright[] __pmacdata = {
+ 0x7f, 0x46, 0x42, 0x3e, 0x3a, 0x36, 0x32, 0x2e,
+ 0x2a, 0x26, 0x22, 0x1e, 0x1a, 0x16, 0x12, 0x0e
+};
+
+static int __openfirmware
+pmu_set_backlight_enable(int on, int level, void* data)
+{
+ struct adb_request req;
+
+ if (vias == NULL)
+ return -ENODEV;
+
+ if (on) {
+ pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT,
+ backlight_to_bright[level]);
+ pmu_wait_complete(&req);
+ }
+ pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
+ PMU_POW_BACKLIGHT | (on ? PMU_POW_ON : PMU_POW_OFF));
+ pmu_wait_complete(&req);
+
+ return 0;
+}
+
+static void __openfirmware
+pmu_bright_complete(struct adb_request *req)
+{
+ if (req == &bright_req_1)
+ clear_bit(1, &async_req_locks);
+ if (req == &bright_req_2)
+ clear_bit(2, &async_req_locks);
+}
+
+static int __openfirmware
+pmu_set_backlight_level(int level, void* data)
+{
+ if (vias == NULL)
+ return -ENODEV;
+
+ if (test_and_set_bit(1, &async_req_locks))
+ return -EAGAIN;
+ pmu_request(&bright_req_1, pmu_bright_complete, 2, PMU_BACKLIGHT_BRIGHT,
+ backlight_to_bright[level]);
+ if (test_and_set_bit(2, &async_req_locks))
+ return -EAGAIN;
+ pmu_request(&bright_req_2, pmu_bright_complete, 2, PMU_POWER_CTRL,
+ PMU_POW_BACKLIGHT | (level > BACKLIGHT_OFF ?
+ PMU_POW_ON : PMU_POW_OFF));
+
+ return 0;
+}
+#endif /* CONFIG_PMAC_BACKLIGHT */
+
+void __pmac
+pmu_enable_irled(int on)
+{
+ struct adb_request req;
+
+ if (vias == NULL)
+ return ;
+ if (pmu_kind == PMU_KEYLARGO_BASED)
+ return ;
+
+ pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
+ (on ? PMU_POW_ON : PMU_POW_OFF));
+ pmu_wait_complete(&req);
+}
+
+void __pmac
+pmu_restart(void)
+{
+ struct adb_request req;
+
+ if (via == NULL)
+ return;
+
+ local_irq_disable();
+
+ drop_interrupts = 1;
+
+ if (pmu_kind != PMU_KEYLARGO_BASED) {
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
+ PMU_INT_TICK );
+ while(!req.complete)
+ pmu_poll();
+ }
+
+ pmu_request(&req, NULL, 1, PMU_RESET);
+ pmu_wait_complete(&req);
+ for (;;)
+ ;
+}
+
+void __pmac
+pmu_shutdown(void)
+{
+ struct adb_request req;
+
+ if (via == NULL)
+ return;
+
+ local_irq_disable();
+
+ drop_interrupts = 1;
+
+ if (pmu_kind != PMU_KEYLARGO_BASED) {
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
+ PMU_INT_TICK );
+ pmu_wait_complete(&req);
+ } else {
+ /* Disable server mode on shutdown or we'll just
+ * wake up again
+ */
+ pmu_set_server_mode(0);
+ }
+
+ pmu_request(&req, NULL, 5, PMU_SHUTDOWN,
+ 'M', 'A', 'T', 'T');
+ pmu_wait_complete(&req);
+ for (;;)
+ ;
+}
+
+int
+pmu_present(void)
+{
+ return via != 0;
+}
+
+struct pmu_i2c_hdr {
+ u8 bus;
+ u8 mode;
+ u8 bus2;
+ u8 address;
+ u8 sub_addr;
+ u8 comb_addr;
+ u8 count;
+};
+
+int
+pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len)
+{
+ struct adb_request req;
+ struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
+ int retry;
+ int rc;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ hdr->bus = bus;
+ hdr->address = addr & 0xfe;
+ hdr->mode = PMU_I2C_MODE_COMBINED;
+ hdr->bus2 = 0;
+ hdr->sub_addr = subaddr;
+ hdr->comb_addr = addr | 1;
+ hdr->count = len;
+
+ req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.data[0] = PMU_I2C_CMD;
+ req.reply[0] = 0xff;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_OK)
+ break;
+ mdelay(15);
+ }
+ if (req.reply[0] != PMU_I2C_STATUS_OK)
+ return -1;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ mdelay(15);
+
+ hdr->bus = PMU_I2C_BUS_STATUS;
+ req.reply[0] = 0xff;
+
+ req.nbytes = 2;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.data[0] = PMU_I2C_CMD;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
+ memcpy(data, &req.reply[1], req.reply_len - 1);
+ return req.reply_len - 1;
+ }
+ }
+ return -1;
+}
+
+int
+pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len)
+{
+ struct adb_request req;
+ struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
+ int retry;
+ int rc;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ hdr->bus = bus;
+ hdr->address = addr & 0xfe;
+ hdr->mode = PMU_I2C_MODE_STDSUB;
+ hdr->bus2 = 0;
+ hdr->sub_addr = subaddr;
+ hdr->comb_addr = addr & 0xfe;
+ hdr->count = len;
+
+ req.data[0] = PMU_I2C_CMD;
+ memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
+ req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.reply[0] = 0xff;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_OK)
+ break;
+ mdelay(15);
+ }
+ if (req.reply[0] != PMU_I2C_STATUS_OK)
+ return -1;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ mdelay(15);
+
+ hdr->bus = PMU_I2C_BUS_STATUS;
+ req.reply[0] = 0xff;
+
+ req.nbytes = 2;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.data[0] = PMU_I2C_CMD;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_OK)
+ return len;
+ }
+ return -1;
+}
+
+int
+pmu_i2c_simple_read(int bus, int addr, u8* data, int len)
+{
+ struct adb_request req;
+ struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
+ int retry;
+ int rc;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ hdr->bus = bus;
+ hdr->address = addr | 1;
+ hdr->mode = PMU_I2C_MODE_SIMPLE;
+ hdr->bus2 = 0;
+ hdr->sub_addr = 0;
+ hdr->comb_addr = 0;
+ hdr->count = len;
+
+ req.data[0] = PMU_I2C_CMD;
+ req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.reply[0] = 0xff;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_OK)
+ break;
+ mdelay(15);
+ }
+ if (req.reply[0] != PMU_I2C_STATUS_OK)
+ return -1;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ mdelay(15);
+
+ hdr->bus = PMU_I2C_BUS_STATUS;
+ req.reply[0] = 0xff;
+
+ req.nbytes = 2;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.data[0] = PMU_I2C_CMD;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
+ memcpy(data, &req.reply[1], req.reply_len - 1);
+ return req.reply_len - 1;
+ }
+ }
+ return -1;
+}
+
+int
+pmu_i2c_simple_write(int bus, int addr, u8* data, int len)
+{
+ struct adb_request req;
+ struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
+ int retry;
+ int rc;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ hdr->bus = bus;
+ hdr->address = addr & 0xfe;
+ hdr->mode = PMU_I2C_MODE_SIMPLE;
+ hdr->bus2 = 0;
+ hdr->sub_addr = 0;
+ hdr->comb_addr = 0;
+ hdr->count = len;
+
+ req.data[0] = PMU_I2C_CMD;
+ memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
+ req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.reply[0] = 0xff;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_OK)
+ break;
+ mdelay(15);
+ }
+ if (req.reply[0] != PMU_I2C_STATUS_OK)
+ return -1;
+
+ for (retry=0; retry<16; retry++) {
+ memset(&req, 0, sizeof(req));
+
+ mdelay(15);
+
+ hdr->bus = PMU_I2C_BUS_STATUS;
+ req.reply[0] = 0xff;
+
+ req.nbytes = 2;
+ req.reply_expected = 0;
+ req.reply_len = 0;
+ req.data[0] = PMU_I2C_CMD;
+ rc = pmu_queue_request(&req);
+ if (rc)
+ return rc;
+ while(!req.complete)
+ pmu_poll();
+ if (req.reply[0] == PMU_I2C_STATUS_OK)
+ return len;
+ }
+ return -1;
+}
+
+#ifdef CONFIG_PMAC_PBOOK
+
+static LIST_HEAD(sleep_notifiers);
+
+int
+pmu_register_sleep_notifier(struct pmu_sleep_notifier *n)
+{
+ struct list_head *list;
+ struct pmu_sleep_notifier *notifier;
+
+ for (list = sleep_notifiers.next; list != &sleep_notifiers;
+ list = list->next) {
+ notifier = list_entry(list, struct pmu_sleep_notifier, list);
+ if (n->priority > notifier->priority)
+ break;
+ }
+ __list_add(&n->list, list->prev, list);
+ return 0;
+}
+
+int
+pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n)
+{
+ if (n->list.next == 0)
+ return -ENOENT;
+ list_del(&n->list);
+ n->list.next = NULL;
+ return 0;
+}
+
+/* Sleep is broadcast last-to-first */
+static int __pmac
+broadcast_sleep(int when, int fallback)
+{
+ int ret = PBOOK_SLEEP_OK;
+ struct list_head *list;
+ struct pmu_sleep_notifier *notifier;
+
+ for (list = sleep_notifiers.prev; list != &sleep_notifiers;
+ list = list->prev) {
+ notifier = list_entry(list, struct pmu_sleep_notifier, list);
+ ret = notifier->notifier_call(notifier, when);
+ if (ret != PBOOK_SLEEP_OK) {
+ printk(KERN_DEBUG "sleep %d rejected by %p (%p)\n",
+ when, notifier, notifier->notifier_call);
+ for (; list != &sleep_notifiers; list = list->next) {
+ notifier = list_entry(list, struct pmu_sleep_notifier, list);
+ notifier->notifier_call(notifier, fallback);
+ }
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/* Wake is broadcast first-to-last */
+static int __pmac
+broadcast_wake(void)
+{
+ int ret = PBOOK_SLEEP_OK;
+ struct list_head *list;
+ struct pmu_sleep_notifier *notifier;
+
+ for (list = sleep_notifiers.next; list != &sleep_notifiers;
+ list = list->next) {
+ notifier = list_entry(list, struct pmu_sleep_notifier, list);
+ notifier->notifier_call(notifier, PBOOK_WAKE);
+ }
+ return ret;
+}
+
+/*
+ * This struct is used to store config register values for
+ * PCI devices which may get powered off when we sleep.
+ */
+static struct pci_save {
+#ifndef HACKED_PCI_SAVE
+ u16 command;
+ u16 cache_lat;
+ u16 intr;
+ u32 rom_address;
+#else
+ u32 config[16];
+#endif
+} *pbook_pci_saves;
+static int pbook_npci_saves;
+
+static void __pmac
+pbook_alloc_pci_save(void)
+{
+ int npci;
+ struct pci_dev *pd = NULL;
+
+ npci = 0;
+ while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
+ ++npci;
+ }
+ if (npci == 0)
+ return;
+ pbook_pci_saves = (struct pci_save *)
+ kmalloc(npci * sizeof(struct pci_save), GFP_KERNEL);
+ pbook_npci_saves = npci;
+}
+
+static void __pmac
+pbook_free_pci_save(void)
+{
+ if (pbook_pci_saves == NULL)
+ return;
+ kfree(pbook_pci_saves);
+ pbook_pci_saves = NULL;
+ pbook_npci_saves = 0;
+}
+
+static void __pmac
+pbook_pci_save(void)
+{
+ struct pci_save *ps = pbook_pci_saves;
+ struct pci_dev *pd = NULL;
+ int npci = pbook_npci_saves;
+
+ if (ps == NULL)
+ return;
+
+ while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
+ if (npci-- == 0)
+ return;
+#ifndef HACKED_PCI_SAVE
+ pci_read_config_word(pd, PCI_COMMAND, &ps->command);
+ pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
+ pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
+ pci_read_config_dword(pd, PCI_ROM_ADDRESS, &ps->rom_address);
+#else
+ int i;
+ for (i=1;i<16;i++)
+ pci_read_config_dword(pd, i<<4, &ps->config[i]);
+#endif
+ ++ps;
+ }
+}
+
+/* For this to work, we must take care of a few things: If gmac was enabled
+ * during boot, it will be in the pci dev list. If it's disabled at this point
+ * (and it will probably be), then you can't access it's config space.
+ */
+static void __pmac
+pbook_pci_restore(void)
+{
+ u16 cmd;
+ struct pci_save *ps = pbook_pci_saves - 1;
+ struct pci_dev *pd = NULL;
+ int npci = pbook_npci_saves;
+ int j;
+
+ while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
+#ifdef HACKED_PCI_SAVE
+ int i;
+ if (npci-- == 0)
+ return;
+ ps++;
+ for (i=2;i<16;i++)
+ pci_write_config_dword(pd, i<<4, ps->config[i]);
+ pci_write_config_dword(pd, 4, ps->config[1]);
+#else
+ if (npci-- == 0)
+ return;
+ ps++;
+ if (ps->command == 0)
+ continue;
+ pci_read_config_word(pd, PCI_COMMAND, &cmd);
+ if ((ps->command & ~cmd) == 0)
+ continue;
+ switch (pd->hdr_type) {
+ case PCI_HEADER_TYPE_NORMAL:
+ for (j = 0; j < 6; ++j)
+ pci_write_config_dword(pd,
+ PCI_BASE_ADDRESS_0 + j*4,
+ pd->resource[j].start);
+ pci_write_config_dword(pd, PCI_ROM_ADDRESS,
+ ps->rom_address);
+ pci_write_config_word(pd, PCI_CACHE_LINE_SIZE,
+ ps->cache_lat);
+ pci_write_config_word(pd, PCI_INTERRUPT_LINE,
+ ps->intr);
+ pci_write_config_word(pd, PCI_COMMAND, ps->command);
+ break;
+ }
+#endif
+ }
+}
+
+#ifdef DEBUG_SLEEP
+/* N.B. This doesn't work on the 3400 */
+void __pmac
+pmu_blink(int n)
+{
+ struct adb_request req;
+
+ memset(&req, 0, sizeof(req));
+
+ for (; n > 0; --n) {
+ req.nbytes = 4;
+ req.done = NULL;
+ req.data[0] = 0xee;
+ req.data[1] = 4;
+ req.data[2] = 0;
+ req.data[3] = 1;
+ req.reply[0] = ADB_RET_OK;
+ req.reply_len = 1;
+ req.reply_expected = 0;
+ pmu_polled_request(&req);
+ mdelay(50);
+ req.nbytes = 4;
+ req.done = NULL;
+ req.data[0] = 0xee;
+ req.data[1] = 4;
+ req.data[2] = 0;
+ req.data[3] = 0;
+ req.reply[0] = ADB_RET_OK;
+ req.reply_len = 1;
+ req.reply_expected = 0;
+ pmu_polled_request(&req);
+ mdelay(50);
+ }
+ mdelay(50);
+}
+#endif
+
+/*
+ * Put the powerbook to sleep.
+ */
+
+static u32 save_via[8] __pmacdata;
+
+static void __pmac
+save_via_state(void)
+{
+ save_via[0] = in_8(&via[ANH]);
+ save_via[1] = in_8(&via[DIRA]);
+ save_via[2] = in_8(&via[B]);
+ save_via[3] = in_8(&via[DIRB]);
+ save_via[4] = in_8(&via[PCR]);
+ save_via[5] = in_8(&via[ACR]);
+ save_via[6] = in_8(&via[T1CL]);
+ save_via[7] = in_8(&via[T1CH]);
+}
+static void __pmac
+restore_via_state(void)
+{
+ out_8(&via[ANH], save_via[0]);
+ out_8(&via[DIRA], save_via[1]);
+ out_8(&via[B], save_via[2]);
+ out_8(&via[DIRB], save_via[3]);
+ out_8(&via[PCR], save_via[4]);
+ out_8(&via[ACR], save_via[5]);
+ out_8(&via[T1CL], save_via[6]);
+ out_8(&via[T1CH], save_via[7]);
+ out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
+ out_8(&via[IFR], 0x7f); /* clear IFR */
+ out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
+}
+
+static int __pmac
+pmac_suspend_devices(void)
+{
+ int ret;
+
+ pm_prepare_console();
+
+ /* Notify old-style device drivers & userland */
+ ret = broadcast_sleep(PBOOK_SLEEP_REQUEST, PBOOK_SLEEP_REJECT);
+ if (ret != PBOOK_SLEEP_OK) {
+ printk(KERN_ERR "Sleep rejected by drivers\n");
+ return -EBUSY;
+ }
+
+ /* Sync the disks. */
+ /* XXX It would be nice to have some way to ensure that
+ * nobody is dirtying any new buffers while we wait. That
+ * could be achieved using the refrigerator for processes
+ * that swsusp uses
+ */
+ sys_sync();
+
+ /* Sleep can fail now. May not be very robust but useful for debugging */
+ ret = broadcast_sleep(PBOOK_SLEEP_NOW, PBOOK_WAKE);
+ if (ret != PBOOK_SLEEP_OK) {
+ printk(KERN_ERR "Driver sleep failed\n");
+ return -EBUSY;
+ }
+
+ /* Send suspend call to devices, hold the device core's dpm_sem */
+ ret = device_suspend(PMSG_SUSPEND);
+ if (ret) {
+ broadcast_wake();
+ printk(KERN_ERR "Driver sleep failed\n");
+ return -EBUSY;
+ }
+
+ preempt_disable();
+
+ /* Make sure the decrementer won't interrupt us */
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+ /* Make sure any pending DEC interrupt occurring while we did
+ * the above didn't re-enable the DEC */
+ mb();
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+ /* We can now disable MSR_EE. This code of course works properly only
+ * on UP machines... For SMP, if we ever implement sleep, we'll have to
+ * stop the "other" CPUs way before we do all that stuff.
+ */
+ local_irq_disable();
+
+ /* Broadcast power down irq
+ * This isn't that useful in most cases (only directly wired devices can
+ * use this but still... This will take care of sysdev's as well, so
+ * we exit from here with local irqs disabled and PIC off.
+ */
+ ret = device_power_down(PM_SUSPEND_MEM);
+ if (ret) {
+ wakeup_decrementer();
+ local_irq_enable();
+ preempt_enable();
+ device_resume();
+ broadcast_wake();
+ printk(KERN_ERR "Driver powerdown failed\n");
+ return -EBUSY;
+ }
+
+ /* Wait for completion of async backlight requests */
+ while (!bright_req_1.complete || !bright_req_2.complete ||
+ !batt_req.complete)
+ pmu_poll();
+
+ /* Giveup the lazy FPU & vec so we don't have to back them
+ * up from the low level code
+ */
+ enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+ return 0;
+}
+
+static int __pmac
+pmac_wakeup_devices(void)
+{
+ mdelay(100);
+
+ /* Power back up system devices (including the PIC) */
+ device_power_up();
+
+ /* Force a poll of ADB interrupts */
+ adb_int_pending = 1;
+ via_pmu_interrupt(0, NULL, NULL);
+
+ /* Restart jiffies & scheduling */
+ wakeup_decrementer();
+
+ /* Re-enable local CPU interrupts */
+ local_irq_enable();
+
+ mdelay(100);
+
+ preempt_enable();
+
+ /* Resume devices */
+ device_resume();
+
+ /* Notify old style drivers */
+ broadcast_wake();
+
+ pm_restore_console();
+
+ return 0;
+}
+
+#define GRACKLE_PM (1<<7)
+#define GRACKLE_DOZE (1<<5)
+#define GRACKLE_NAP (1<<4)
+#define GRACKLE_SLEEP (1<<3)
+
+int __pmac
+powerbook_sleep_grackle(void)
+{
+ unsigned long save_l2cr;
+ unsigned short pmcr1;
+ struct adb_request req;
+ int ret;
+ struct pci_dev *grackle;
+
+ grackle = pci_find_slot(0, 0);
+ if (!grackle)
+ return -ENODEV;
+
+ ret = pmac_suspend_devices();
+ if (ret) {
+ printk(KERN_ERR "Sleep rejected by devices\n");
+ return ret;
+ }
+
+ /* Turn off various things. Darwin does some retry tests here... */
+ pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
+ pmu_wait_complete(&req);
+ pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
+ PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY);
+ pmu_wait_complete(&req);
+
+ /* For 750, save backside cache setting and disable it */
+ save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
+
+ if (!__fake_sleep) {
+ /* Ask the PMU to put us to sleep */
+ pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
+ pmu_wait_complete(&req);
+ }
+
+ /* The VIA is supposed not to be restored correctly*/
+ save_via_state();
+ /* We shut down some HW */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
+
+ pci_read_config_word(grackle, 0x70, &pmcr1);
+ /* Apparently, MacOS uses NAP mode for Grackle ??? */
+ pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP);
+ pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
+ pci_write_config_word(grackle, 0x70, pmcr1);
+
+ /* Call low-level ASM sleep handler */
+ if (__fake_sleep)
+ mdelay(5000);
+ else
+ low_sleep_handler();
+
+ /* We're awake again, stop grackle PM */
+ pci_read_config_word(grackle, 0x70, &pmcr1);
+ pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP);
+ pci_write_config_word(grackle, 0x70, pmcr1);
+
+ /* Make sure the PMU is idle */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
+ restore_via_state();
+
+ /* Restore L2 cache */
+ if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ _set_L2CR(save_l2cr);
+
+ /* Restore userland MMU context */
+ set_context(current->active_mm->context, current->active_mm->pgd);
+
+ /* Power things up */
+ pmu_unlock();
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
+ pmu_wait_complete(&req);
+ pmu_request(&req, NULL, 2, PMU_POWER_CTRL0,
+ PMU_POW0_ON|PMU_POW0_HARD_DRIVE);
+ pmu_wait_complete(&req);
+ pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
+ PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
+ pmu_wait_complete(&req);
+
+ pmac_wakeup_devices();
+
+ return 0;
+}
+
+static int __pmac
+powerbook_sleep_Core99(void)
+{
+ unsigned long save_l2cr;
+ unsigned long save_l3cr;
+ struct adb_request req;
+ int ret;
+
+ if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
+ printk(KERN_ERR "Sleep mode not supported on this machine\n");
+ return -ENOSYS;
+ }
+
+ if (num_online_cpus() > 1 || cpu_is_offline(0))
+ return -EAGAIN;
+
+ ret = pmac_suspend_devices();
+ if (ret) {
+ printk(KERN_ERR "Sleep rejected by devices\n");
+ return ret;
+ }
+
+ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+
+ /* Tell PMU what events will wake us up */
+ pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
+ 0xff, 0xff);
+ pmu_wait_complete(&req);
+ pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS,
+ 0, PMU_PWR_WAKEUP_KEY |
+ (option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0));
+ pmu_wait_complete(&req);
+
+ /* Save the state of the L2 and L3 caches */
+ save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
+ save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
+
+ if (!__fake_sleep) {
+ /* Ask the PMU to put us to sleep */
+ pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
+ pmu_wait_complete(&req);
+ }
+
+ /* The VIA is supposed not to be restored correctly*/
+ save_via_state();
+
+ /* Shut down various ASICs. There's a chance that we can no longer
+ * talk to the PMU after this, so I moved it to _after_ sending the
+ * sleep command to it. Still need to be checked.
+ */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
+
+ /* Call low-level ASM sleep handler */
+ if (__fake_sleep)
+ mdelay(5000);
+ else
+ low_sleep_handler();
+
+ /* Restore Apple core ASICs state */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
+
+ /* Restore VIA */
+ restore_via_state();
+
+ /* Restore video */
+ pmac_call_early_video_resume();
+
+ /* Restore L2 cache */
+ if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ _set_L2CR(save_l2cr);
+ /* Restore L3 cache */
+ if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
+ _set_L3CR(save_l3cr);
+
+ /* Restore userland MMU context */
+ set_context(current->active_mm->context, current->active_mm->pgd);
+
+ /* Tell PMU we are ready */
+ pmu_unlock();
+ pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
+ pmu_wait_complete(&req);
+ pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
+ pmu_wait_complete(&req);
+
+ printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
+
+ pmac_wakeup_devices();
+
+ return 0;
+}
+
+#define PB3400_MEM_CTRL 0xf8000000
+#define PB3400_MEM_CTRL_SLEEP 0x70
+
+static int __pmac
+powerbook_sleep_3400(void)
+{
+ int ret, i, x;
+ unsigned int hid0;
+ unsigned long p;
+ struct adb_request sleep_req;
+ void __iomem *mem_ctrl;
+ unsigned int __iomem *mem_ctrl_sleep;
+
+ /* first map in the memory controller registers */
+ mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
+ if (mem_ctrl == NULL) {
+ printk("powerbook_sleep_3400: ioremap failed\n");
+ return -ENOMEM;
+ }
+ mem_ctrl_sleep = mem_ctrl + PB3400_MEM_CTRL_SLEEP;
+
+ /* Allocate room for PCI save */
+ pbook_alloc_pci_save();
+
+ ret = pmac_suspend_devices();
+ if (ret) {
+ pbook_free_pci_save();
+ printk(KERN_ERR "Sleep rejected by devices\n");
+ return ret;
+ }
+
+ /* Save the state of PCI config space for some slots */
+ pbook_pci_save();
+
+ /* Set the memory controller to keep the memory refreshed
+ while we're asleep */
+ for (i = 0x403f; i >= 0x4000; --i) {
+ out_be32(mem_ctrl_sleep, i);
+ do {
+ x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff;
+ } while (x == 0);
+ if (x >= 0x100)
+ break;
+ }
+
+ /* Ask the PMU to put us to sleep */
+ pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
+ while (!sleep_req.complete)
+ mb();
+
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
+
+ /* displacement-flush the L2 cache - necessary? */
+ for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000)
+ i = *(volatile int *)p;
+ asleep = 1;
+
+ /* Put the CPU into sleep mode */
+ asm volatile("mfspr %0,1008" : "=r" (hid0) :);
+ hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
+ asm volatile("mtspr 1008,%0" : : "r" (hid0));
+ _nmask_and_or_msr(0, MSR_POW | MSR_EE);
+ udelay(10);
+
+ /* OK, we're awake again, start restoring things */
+ out_be32(mem_ctrl_sleep, 0x3f);
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
+ pbook_pci_restore();
+ pmu_unlock();
+
+ /* wait for the PMU interrupt sequence to complete */
+ while (asleep)
+ mb();
+
+ pmac_wakeup_devices();
+ pbook_free_pci_save();
+ iounmap(mem_ctrl);
+
+ return 0;
+}
+
+/*
+ * Support for /dev/pmu device
+ */
+#define RB_SIZE 0x10
+struct pmu_private {
+ struct list_head list;
+ int rb_get;
+ int rb_put;
+ struct rb_entry {
+ unsigned short len;
+ unsigned char data[16];
+ } rb_buf[RB_SIZE];
+ wait_queue_head_t wait;
+ spinlock_t lock;
+#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
+ int backlight_locker;
+#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
+};
+
+static LIST_HEAD(all_pmu_pvt);
+static DEFINE_SPINLOCK(all_pvt_lock __pmacdata);
+
+static void __pmac
+pmu_pass_intr(unsigned char *data, int len)
+{
+ struct pmu_private *pp;
+ struct list_head *list;
+ int i;
+ unsigned long flags;
+
+ if (len > sizeof(pp->rb_buf[0].data))
+ len = sizeof(pp->rb_buf[0].data);
+ spin_lock_irqsave(&all_pvt_lock, flags);
+ for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) {
+ pp = list_entry(list, struct pmu_private, list);
+ spin_lock(&pp->lock);
+ i = pp->rb_put + 1;
+ if (i >= RB_SIZE)
+ i = 0;
+ if (i != pp->rb_get) {
+ struct rb_entry *rp = &pp->rb_buf[pp->rb_put];
+ rp->len = len;
+ memcpy(rp->data, data, len);
+ pp->rb_put = i;
+ wake_up_interruptible(&pp->wait);
+ }
+ spin_unlock(&pp->lock);
+ }
+ spin_unlock_irqrestore(&all_pvt_lock, flags);
+}
+
+static int __pmac
+pmu_open(struct inode *inode, struct file *file)
+{
+ struct pmu_private *pp;
+ unsigned long flags;
+
+ pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL);
+ if (pp == 0)
+ return -ENOMEM;
+ pp->rb_get = pp->rb_put = 0;
+ spin_lock_init(&pp->lock);
+ init_waitqueue_head(&pp->wait);
+ spin_lock_irqsave(&all_pvt_lock, flags);
+#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
+ pp->backlight_locker = 0;
+#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
+ list_add(&pp->list, &all_pmu_pvt);
+ spin_unlock_irqrestore(&all_pvt_lock, flags);
+ file->private_data = pp;
+ return 0;
+}
+
+static ssize_t __pmac
+pmu_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct pmu_private *pp = file->private_data;
+ DECLARE_WAITQUEUE(wait, current);
+ unsigned long flags;
+ int ret = 0;
+
+ if (count < 1 || pp == 0)
+ return -EINVAL;
+ if (!access_ok(VERIFY_WRITE, buf, count))
+ return -EFAULT;
+
+ spin_lock_irqsave(&pp->lock, flags);
+ add_wait_queue(&pp->wait, &wait);
+ current->state = TASK_INTERRUPTIBLE;
+
+ for (;;) {
+ ret = -EAGAIN;
+ if (pp->rb_get != pp->rb_put) {
+ int i = pp->rb_get;
+ struct rb_entry *rp = &pp->rb_buf[i];
+ ret = rp->len;
+ spin_unlock_irqrestore(&pp->lock, flags);
+ if (ret > count)
+ ret = count;
+ if (ret > 0 && copy_to_user(buf, rp->data, ret))
+ ret = -EFAULT;
+ if (++i >= RB_SIZE)
+ i = 0;
+ spin_lock_irqsave(&pp->lock, flags);
+ pp->rb_get = i;
+ }
+ if (ret >= 0)
+ break;
+ if (file->f_flags & O_NONBLOCK)
+ break;
+ ret = -ERESTARTSYS;
+ if (signal_pending(current))
+ break;
+ spin_unlock_irqrestore(&pp->lock, flags);
+ schedule();
+ spin_lock_irqsave(&pp->lock, flags);
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&pp->wait, &wait);
+ spin_unlock_irqrestore(&pp->lock, flags);
+
+ return ret;
+}
+
+static ssize_t __pmac
+pmu_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ return 0;
+}
+
+static unsigned int __pmac
+pmu_fpoll(struct file *filp, poll_table *wait)
+{
+ struct pmu_private *pp = filp->private_data;
+ unsigned int mask = 0;
+ unsigned long flags;
+
+ if (pp == 0)
+ return 0;
+ poll_wait(filp, &pp->wait, wait);
+ spin_lock_irqsave(&pp->lock, flags);
+ if (pp->rb_get != pp->rb_put)
+ mask |= POLLIN;
+ spin_unlock_irqrestore(&pp->lock, flags);
+ return mask;
+}
+
+static int __pmac
+pmu_release(struct inode *inode, struct file *file)
+{
+ struct pmu_private *pp = file->private_data;
+ unsigned long flags;
+
+ lock_kernel();
+ if (pp != 0) {
+ file->private_data = NULL;
+ spin_lock_irqsave(&all_pvt_lock, flags);
+ list_del(&pp->list);
+ spin_unlock_irqrestore(&all_pvt_lock, flags);
+#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
+ if (pp->backlight_locker) {
+ spin_lock_irqsave(&pmu_lock, flags);
+ disable_kernel_backlight--;
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ }
+#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
+ kfree(pp);
+ }
+ unlock_kernel();
+ return 0;
+}
+
+/* Note: removed __openfirmware here since it causes link errors */
+static int __pmac
+pmu_ioctl(struct inode * inode, struct file *filp,
+ u_int cmd, u_long arg)
+{
+ struct pmu_private *pp = filp->private_data;
+ __u32 __user *argp = (__u32 __user *)arg;
+ int error;
+
+ switch (cmd) {
+ case PMU_IOC_SLEEP:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+ if (sleep_in_progress)
+ return -EBUSY;
+ sleep_in_progress = 1;
+ switch (pmu_kind) {
+ case PMU_OHARE_BASED:
+ error = powerbook_sleep_3400();
+ break;
+ case PMU_HEATHROW_BASED:
+ case PMU_PADDINGTON_BASED:
+ error = powerbook_sleep_grackle();
+ break;
+ case PMU_KEYLARGO_BASED:
+ error = powerbook_sleep_Core99();
+ break;
+ default:
+ error = -ENOSYS;
+ }
+ sleep_in_progress = 0;
+ return error;
+ case PMU_IOC_CAN_SLEEP:
+ if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0)
+ return put_user(0, argp);
+ else
+ return put_user(1, argp);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+ /* Backlight should have its own device or go via
+ * the fbdev
+ */
+ case PMU_IOC_GET_BACKLIGHT:
+ if (sleep_in_progress)
+ return -EBUSY;
+ error = get_backlight_level();
+ if (error < 0)
+ return error;
+ return put_user(error, argp);
+ case PMU_IOC_SET_BACKLIGHT:
+ {
+ __u32 value;
+ if (sleep_in_progress)
+ return -EBUSY;
+ error = get_user(value, argp);
+ if (!error)
+ error = set_backlight_level(value);
+ return error;
+ }
+#ifdef CONFIG_INPUT_ADBHID
+ case PMU_IOC_GRAB_BACKLIGHT: {
+ unsigned long flags;
+ if (pp->backlight_locker)
+ return 0;
+ pp->backlight_locker = 1;
+ spin_lock_irqsave(&pmu_lock, flags);
+ disable_kernel_backlight++;
+ spin_unlock_irqrestore(&pmu_lock, flags);
+ return 0;
+ }
+#endif /* CONFIG_INPUT_ADBHID */
+#endif /* CONFIG_PMAC_BACKLIGHT */
+ case PMU_IOC_GET_MODEL:
+ return put_user(pmu_kind, argp);
+ case PMU_IOC_HAS_ADB:
+ return put_user(pmu_has_adb, argp);
+ }
+ return -EINVAL;
+}
+
+static struct file_operations pmu_device_fops __pmacdata = {
+ .read = pmu_read,
+ .write = pmu_write,
+ .poll = pmu_fpoll,
+ .ioctl = pmu_ioctl,
+ .open = pmu_open,
+ .release = pmu_release,
+};
+
+static struct miscdevice pmu_device __pmacdata = {
+ PMU_MINOR, "pmu", &pmu_device_fops
+};
+
+void pmu_device_init(void)
+{
+ if (!via)
+ return;
+ if (misc_register(&pmu_device) < 0)
+ printk(KERN_ERR "via-pmu: cannot register misc device.\n");
+}
+#endif /* CONFIG_PMAC_PBOOK */
+
+#ifdef DEBUG_SLEEP
+static inline void __pmac
+polled_handshake(volatile unsigned char __iomem *via)
+{
+ via[B] &= ~TREQ; eieio();
+ while ((via[B] & TACK) != 0)
+ ;
+ via[B] |= TREQ; eieio();
+ while ((via[B] & TACK) == 0)
+ ;
+}
+
+static inline void __pmac
+polled_send_byte(volatile unsigned char __iomem *via, int x)
+{
+ via[ACR] |= SR_OUT | SR_EXT; eieio();
+ via[SR] = x; eieio();
+ polled_handshake(via);
+}
+
+static inline int __pmac
+polled_recv_byte(volatile unsigned char __iomem *via)
+{
+ int x;
+
+ via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio();
+ x = via[SR]; eieio();
+ polled_handshake(via);
+ x = via[SR]; eieio();
+ return x;
+}
+
+int __pmac
+pmu_polled_request(struct adb_request *req)
+{
+ unsigned long flags;
+ int i, l, c;
+ volatile unsigned char __iomem *v = via;
+
+ req->complete = 1;
+ c = req->data[0];
+ l = pmu_data_len[c][0];
+ if (l >= 0 && req->nbytes != l + 1)
+ return -EINVAL;
+
+ local_irq_save(flags);
+ while (pmu_state != idle)
+ pmu_poll();
+
+ while ((via[B] & TACK) == 0)
+ ;
+ polled_send_byte(v, c);
+ if (l < 0) {
+ l = req->nbytes - 1;
+ polled_send_byte(v, l);
+ }
+ for (i = 1; i <= l; ++i)
+ polled_send_byte(v, req->data[i]);
+
+ l = pmu_data_len[c][1];
+ if (l < 0)
+ l = polled_recv_byte(v);
+ for (i = 0; i < l; ++i)
+ req->reply[i + req->reply_len] = polled_recv_byte(v);
+
+ if (req->done)
+ (*req->done)(req);
+
+ local_irq_restore(flags);
+ return 0;
+}
+#endif /* DEBUG_SLEEP */
+
+
+/* FIXME: This is a temporary set of callbacks to enable us
+ * to do suspend-to-disk.
+ */
+
+#ifdef CONFIG_PM
+
+static int pmu_sys_suspended = 0;
+
+static int pmu_sys_suspend(struct sys_device *sysdev, u32 state)
+{
+ if (state != PM_SUSPEND_DISK || pmu_sys_suspended)
+ return 0;
+
+ /* Suspend PMU event interrupts */
+ pmu_suspend();
+
+ pmu_sys_suspended = 1;
+ return 0;
+}
+
+static int pmu_sys_resume(struct sys_device *sysdev)
+{
+ struct adb_request req;
+
+ if (!pmu_sys_suspended)
+ return 0;
+
+ /* Tell PMU we are ready */
+ pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
+ pmu_wait_complete(&req);
+
+ /* Resume PMU event interrupts */
+ pmu_resume();
+
+ pmu_sys_suspended = 0;
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct sysdev_class pmu_sysclass = {
+ set_kset_name("pmu"),
+};
+
+static struct sys_device device_pmu = {
+ .id = 0,
+ .cls = &pmu_sysclass,
+};
+
+static struct sysdev_driver driver_pmu = {
+#ifdef CONFIG_PM
+ .suspend = &pmu_sys_suspend,
+ .resume = &pmu_sys_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_pmu_sysfs(void)
+{
+ int rc;
+
+ rc = sysdev_class_register(&pmu_sysclass);
+ if (rc) {
+ printk(KERN_ERR "Failed registering PMU sys class\n");
+ return -ENODEV;
+ }
+ rc = sysdev_register(&device_pmu);
+ if (rc) {
+ printk(KERN_ERR "Failed registering PMU sys device\n");
+ return -ENODEV;
+ }
+ rc = sysdev_driver_register(&pmu_sysclass, &driver_pmu);
+ if (rc) {
+ printk(KERN_ERR "Failed registering PMU sys driver\n");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+subsys_initcall(init_pmu_sysfs);
+
+EXPORT_SYMBOL(pmu_request);
+EXPORT_SYMBOL(pmu_poll);
+EXPORT_SYMBOL(pmu_poll_adb);
+EXPORT_SYMBOL(pmu_wait_complete);
+EXPORT_SYMBOL(pmu_suspend);
+EXPORT_SYMBOL(pmu_resume);
+EXPORT_SYMBOL(pmu_unlock);
+EXPORT_SYMBOL(pmu_i2c_combined_read);
+EXPORT_SYMBOL(pmu_i2c_stdsub_write);
+EXPORT_SYMBOL(pmu_i2c_simple_read);
+EXPORT_SYMBOL(pmu_i2c_simple_write);
+#ifdef CONFIG_PMAC_PBOOK
+EXPORT_SYMBOL(pmu_register_sleep_notifier);
+EXPORT_SYMBOL(pmu_unregister_sleep_notifier);
+EXPORT_SYMBOL(pmu_enable_irled);
+EXPORT_SYMBOL(pmu_battery_count);
+EXPORT_SYMBOL(pmu_batteries);
+EXPORT_SYMBOL(pmu_power_flags);
+#endif /* CONFIG_PMAC_PBOOK */
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 20:21:49 +0100