diff options
Diffstat (limited to 'drivers/macintosh')
-rw-r--r-- | drivers/macintosh/macio_asic.c | 11 | ||||
-rw-r--r-- | drivers/macintosh/therm_adt746x.c | 88 | ||||
-rw-r--r-- | drivers/macintosh/therm_pm72.c | 95 | ||||
-rw-r--r-- | drivers/macintosh/therm_windtunnel.c | 126 | ||||
-rw-r--r-- | drivers/macintosh/windfarm_lm75_sensor.c | 129 | ||||
-rw-r--r-- | drivers/macintosh/windfarm_max6690_sensor.c | 103 | ||||
-rw-r--r-- | drivers/macintosh/windfarm_smu_sat.c | 109 |
7 files changed, 360 insertions, 301 deletions
diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 6e149f4a1fff..a0f68386c12f 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -378,6 +378,17 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, dev->ofdev.dev.bus = &macio_bus_type; dev->ofdev.dev.release = macio_release_dev; +#ifdef CONFIG_PCI + /* Set the DMA ops to the ones from the PCI device, this could be + * fishy if we didn't know that on PowerMac it's always direct ops + * or iommu ops that will work fine + */ + dev->ofdev.dev.archdata.dma_ops = + chip->lbus.pdev->dev.archdata.dma_ops; + dev->ofdev.dev.archdata.dma_data = + chip->lbus.pdev->dev.archdata.dma_data; +#endif /* CONFIG_PCI */ + #ifdef DEBUG printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n", dev, &dev->ofdev, &dev->ofdev.dev, &dev->ofdev.dev.kobj); diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index c0621d50c8a0..fde377c60cca 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -37,6 +37,7 @@ #define CONFIG_REG 0x40 #define MANUAL_MASK 0xe0 #define AUTO_MASK 0x20 +#define INVERT_MASK 0x10 static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */ static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */ @@ -71,7 +72,7 @@ MODULE_PARM_DESC(verbose,"Verbose log operations " "(default 0)"); struct thermostat { - struct i2c_client clt; + struct i2c_client *clt; u8 temps[3]; u8 cached_temp[3]; u8 initial_limits[3]; @@ -86,9 +87,6 @@ static struct of_device * of_dev; static struct thermostat* thermostat; static struct task_struct *thread_therm = NULL; -static int attach_one_thermostat(struct i2c_adapter *adapter, int addr, - int busno); - static void write_both_fan_speed(struct thermostat *th, int speed); static void write_fan_speed(struct thermostat *th, int speed, int fan); @@ -100,7 +98,7 @@ write_reg(struct thermostat* th, int reg, u8 data) tmp[0] = reg; tmp[1] = data; - rc = i2c_master_send(&th->clt, (const char *)tmp, 2); + rc = i2c_master_send(th->clt, (const char *)tmp, 2); if (rc < 0) return rc; if (rc != 2) @@ -115,12 +113,12 @@ read_reg(struct thermostat* th, int reg) int rc; reg_addr = (u8)reg; - rc = i2c_master_send(&th->clt, ®_addr, 1); + rc = i2c_master_send(th->clt, ®_addr, 1); if (rc < 0) return rc; if (rc != 1) return -ENODEV; - rc = i2c_master_recv(&th->clt, (char *)&data, 1); + rc = i2c_master_recv(th->clt, (char *)&data, 1); if (rc < 0) return rc; return data; @@ -130,26 +128,36 @@ static int attach_thermostat(struct i2c_adapter *adapter) { unsigned long bus_no; + struct i2c_board_info info; + struct i2c_client *client; if (strncmp(adapter->name, "uni-n", 5)) return -ENODEV; bus_no = simple_strtoul(adapter->name + 6, NULL, 10); if (bus_no != therm_bus) return -ENODEV; - return attach_one_thermostat(adapter, therm_address, bus_no); + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE); + info.addr = therm_address; + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return 0; } static int -detach_thermostat(struct i2c_adapter *adapter) +remove_thermostat(struct i2c_client *client) { - struct thermostat* th; + struct thermostat *th = i2c_get_clientdata(client); int i; - if (thermostat == NULL) - return 0; - - th = thermostat; - if (thread_therm != NULL) { kthread_stop(thread_therm); } @@ -165,8 +173,6 @@ detach_thermostat(struct i2c_adapter *adapter) write_both_fan_speed(th, -1); - i2c_detach_client(&th->clt); - thermostat = NULL; kfree(th); @@ -174,14 +180,6 @@ detach_thermostat(struct i2c_adapter *adapter) return 0; } -static struct i2c_driver thermostat_driver = { - .driver = { - .name = "therm_adt746x", - }, - .attach_adapter = attach_thermostat, - .detach_adapter = detach_thermostat, -}; - static int read_fan_speed(struct thermostat *th, u8 addr) { u8 tmp[2]; @@ -229,7 +227,8 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan) if (speed >= 0) { manual = read_reg(th, MANUAL_MODE[fan]); - write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK); + write_reg(th, MANUAL_MODE[fan], + (manual|MANUAL_MASK) & (~INVERT_MASK)); write_reg(th, FAN_SPD_SET[fan], speed); } else { /* back to automatic */ @@ -369,8 +368,8 @@ static void set_limit(struct thermostat *th, int i) th->limits[i] = default_limits_local[i] + limit_adjust; } -static int attach_one_thermostat(struct i2c_adapter *adapter, int addr, - int busno) +static int probe_thermostat(struct i2c_client *client, + const struct i2c_device_id *id) { struct thermostat* th; int rc; @@ -383,16 +382,12 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr, if (!th) return -ENOMEM; - th->clt.addr = addr; - th->clt.adapter = adapter; - th->clt.driver = &thermostat_driver; - strcpy(th->clt.name, "thermostat"); + i2c_set_clientdata(client, th); + th->clt = client; rc = read_reg(th, 0); if (rc < 0) { - printk(KERN_ERR "adt746x: Thermostat failed to read config " - "from bus %d !\n", - busno); + dev_err(&client->dev, "Thermostat failed to read config!\n"); kfree(th); return -ENODEV; } @@ -421,14 +416,6 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr, thermostat = th; - if (i2c_attach_client(&th->clt)) { - printk(KERN_INFO "adt746x: Thermostat failed to attach " - "client !\n"); - thermostat = NULL; - kfree(th); - return -ENODEV; - } - /* be sure to really write fan speed the first time */ th->last_speed[0] = -2; th->last_speed[1] = -2; @@ -454,6 +441,21 @@ static int attach_one_thermostat(struct i2c_adapter *adapter, int addr, return 0; } +static const struct i2c_device_id therm_adt746x_id[] = { + { "therm_adt746x", 0 }, + { } +}; + +static struct i2c_driver thermostat_driver = { + .driver = { + .name = "therm_adt746x", + }, + .attach_adapter = attach_thermostat, + .probe = probe_thermostat, + .remove = remove_thermostat, + .id_table = therm_adt746x_id, +}; + /* * Now, unfortunately, sysfs doesn't give us a nice void * we could * pass around to the attribute functions, so we don't really have diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 817607e2af6a..a028598af2d3 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -287,22 +287,6 @@ struct fcu_fan_table fcu_fans[] = { }; /* - * i2c_driver structure to attach to the host i2c controller - */ - -static int therm_pm72_attach(struct i2c_adapter *adapter); -static int therm_pm72_detach(struct i2c_adapter *adapter); - -static struct i2c_driver therm_pm72_driver = -{ - .driver = { - .name = "therm_pm72", - }, - .attach_adapter = therm_pm72_attach, - .detach_adapter = therm_pm72_detach, -}; - -/* * Utility function to create an i2c_client structure and * attach it to one of u3 adapters */ @@ -310,6 +294,7 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name) { struct i2c_client *clt; struct i2c_adapter *adap; + struct i2c_board_info info; if (id & 0x200) adap = k2; @@ -320,31 +305,21 @@ static struct i2c_client *attach_i2c_chip(int id, const char *name) if (adap == NULL) return NULL; - clt = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (clt == NULL) - return NULL; - - clt->addr = (id >> 1) & 0x7f; - clt->adapter = adap; - clt->driver = &therm_pm72_driver; - strncpy(clt->name, name, I2C_NAME_SIZE-1); - - if (i2c_attach_client(clt)) { + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = (id >> 1) & 0x7f; + strlcpy(info.type, "therm_pm72", I2C_NAME_SIZE); + clt = i2c_new_device(adap, &info); + if (!clt) { printk(KERN_ERR "therm_pm72: Failed to attach to i2c ID 0x%x\n", id); - kfree(clt); return NULL; } - return clt; -} -/* - * Utility function to get rid of the i2c_client structure - * (will also detach from the adapter hopepfully) - */ -static void detach_i2c_chip(struct i2c_client *clt) -{ - i2c_detach_client(clt); - kfree(clt); + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&clt->detected, &clt->driver->clients); + return clt; } /* @@ -1203,8 +1178,6 @@ static int init_cpu_state(struct cpu_pid_state *state, int index) return 0; fail: - if (state->monitor) - detach_i2c_chip(state->monitor); state->monitor = NULL; return -ENODEV; @@ -1232,7 +1205,6 @@ static void dispose_cpu_state(struct cpu_pid_state *state) device_remove_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm); } - detach_i2c_chip(state->monitor); state->monitor = NULL; } @@ -1407,7 +1379,6 @@ static void dispose_backside_state(struct backside_pid_state *state) device_remove_file(&of_dev->dev, &dev_attr_backside_temperature); device_remove_file(&of_dev->dev, &dev_attr_backside_fan_pwm); - detach_i2c_chip(state->monitor); state->monitor = NULL; } @@ -1532,7 +1503,6 @@ static void dispose_drives_state(struct drives_pid_state *state) device_remove_file(&of_dev->dev, &dev_attr_drives_temperature); device_remove_file(&of_dev->dev, &dev_attr_drives_fan_rpm); - detach_i2c_chip(state->monitor); state->monitor = NULL; } @@ -1654,7 +1624,6 @@ static void dispose_dimms_state(struct dimm_pid_state *state) device_remove_file(&of_dev->dev, &dev_attr_dimms_temperature); - detach_i2c_chip(state->monitor); state->monitor = NULL; } @@ -1779,7 +1748,6 @@ static void dispose_slots_state(struct slots_pid_state *state) device_remove_file(&of_dev->dev, &dev_attr_slots_temperature); device_remove_file(&of_dev->dev, &dev_attr_slots_fan_pwm); - detach_i2c_chip(state->monitor); state->monitor = NULL; } @@ -2008,8 +1976,6 @@ static int attach_fcu(void) */ static void detach_fcu(void) { - if (fcu) - detach_i2c_chip(fcu); fcu = NULL; } @@ -2060,12 +2026,21 @@ static int therm_pm72_attach(struct i2c_adapter *adapter) return 0; } +static int therm_pm72_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + /* Always succeed, the real work was done in therm_pm72_attach() */ + return 0; +} + /* - * Called on every adapter when the driver or the i2c controller + * Called when any of the devices which participates into thermal management * is going away. */ -static int therm_pm72_detach(struct i2c_adapter *adapter) +static int therm_pm72_remove(struct i2c_client *client) { + struct i2c_adapter *adapter = client->adapter; + mutex_lock(&driver_lock); if (state != state_detached) @@ -2096,6 +2071,30 @@ static int therm_pm72_detach(struct i2c_adapter *adapter) return 0; } +/* + * i2c_driver structure to attach to the host i2c controller + */ + +static const struct i2c_device_id therm_pm72_id[] = { + /* + * Fake device name, thermal management is done by several + * chips but we don't need to differentiate between them at + * this point. + */ + { "therm_pm72", 0 }, + { } +}; + +static struct i2c_driver therm_pm72_driver = { + .driver = { + .name = "therm_pm72", + }, + .attach_adapter = therm_pm72_attach, + .probe = therm_pm72_probe, + .remove = therm_pm72_remove, + .id_table = therm_pm72_id, +}; + static int fan_check_loc_match(const char *loc, int fan) { char tmp[64]; diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 3da0a02efd76..40023313a760 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -48,16 +48,6 @@ #define LOG_TEMP 0 /* continously log temperature */ -static int do_probe( struct i2c_adapter *adapter, int addr, int kind); - -/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */ -static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, - 0x4c, 0x4d, 0x4e, 0x4f, - 0x2c, 0x2d, 0x2e, 0x2f, - I2C_CLIENT_END }; - -I2C_CLIENT_INSMOD; - static struct { volatile int running; struct task_struct *poll_task; @@ -315,53 +305,54 @@ static int control_loop(void *dummy) static int do_attach( struct i2c_adapter *adapter ) { - int ret = 0; + /* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */ + static const unsigned short scan_ds1775[] = { + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + I2C_CLIENT_END + }; + static const unsigned short scan_adm1030[] = { + 0x2c, 0x2d, 0x2e, 0x2f, + I2C_CLIENT_END + }; if( strncmp(adapter->name, "uni-n", 5) ) return 0; if( !x.running ) { - ret = i2c_probe( adapter, &addr_data, &do_probe ); + struct i2c_board_info info; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "therm_ds1775", I2C_NAME_SIZE); + i2c_new_probed_device(adapter, &info, scan_ds1775); + + strlcpy(info.type, "therm_adm1030", I2C_NAME_SIZE); + i2c_new_probed_device(adapter, &info, scan_adm1030); + if( x.thermostat && x.fan ) { x.running = 1; x.poll_task = kthread_run(control_loop, NULL, "g4fand"); } } - return ret; + return 0; } static int -do_detach( struct i2c_client *client ) +do_remove(struct i2c_client *client) { - int err; - - if( (err=i2c_detach_client(client)) ) - printk(KERN_ERR "failed to detach thermostat client\n"); - else { - if( x.running ) { - x.running = 0; - kthread_stop(x.poll_task); - x.poll_task = NULL; - } - if( client == x.thermostat ) - x.thermostat = NULL; - else if( client == x.fan ) - x.fan = NULL; - else { - printk(KERN_ERR "g4fan: bad client\n"); - } - kfree( client ); + if (x.running) { + x.running = 0; + kthread_stop(x.poll_task); + x.poll_task = NULL; } - return err; -} + if (client == x.thermostat) + x.thermostat = NULL; + else if (client == x.fan) + x.fan = NULL; + else + printk(KERN_ERR "g4fan: bad client\n"); -static struct i2c_driver g4fan_driver = { - .driver = { - .name = "therm_windtunnel", - }, - .attach_adapter = do_attach, - .detach_client = do_detach, -}; + return 0; +} static int attach_fan( struct i2c_client *cl ) @@ -374,13 +365,8 @@ attach_fan( struct i2c_client *cl ) goto out; printk("ADM1030 fan controller [@%02x]\n", cl->addr ); - strlcpy( cl->name, "ADM1030 fan controller", sizeof(cl->name) ); - - if( !i2c_attach_client(cl) ) - x.fan = cl; + x.fan = cl; out: - if( cl != x.fan ) - kfree( cl ); return 0; } @@ -412,39 +398,47 @@ attach_thermostat( struct i2c_client *cl ) x.temp = temp; x.overheat_temp = os_temp; x.overheat_hyst = hyst_temp; - - strlcpy( cl->name, "DS1775 thermostat", sizeof(cl->name) ); - - if( !i2c_attach_client(cl) ) - x.thermostat = cl; + x.thermostat = cl; out: - if( cl != x.thermostat ) - kfree( cl ); return 0; } +enum chip { ds1775, adm1030 }; + +static const struct i2c_device_id therm_windtunnel_id[] = { + { "therm_ds1775", ds1775 }, + { "therm_adm1030", adm1030 }, + { } +}; + static int -do_probe( struct i2c_adapter *adapter, int addr, int kind ) +do_probe(struct i2c_client *cl, const struct i2c_device_id *id) { - struct i2c_client *cl; + struct i2c_adapter *adapter = cl->adapter; if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_WRITE_BYTE) ) return 0; - if( !(cl=kzalloc(sizeof(*cl), GFP_KERNEL)) ) - return -ENOMEM; - - cl->addr = addr; - cl->adapter = adapter; - cl->driver = &g4fan_driver; - cl->flags = 0; - - if( addr < 0x48 ) + switch (id->driver_data) { + case adm1030: return attach_fan( cl ); - return attach_thermostat( cl ); + case ds1775: + return attach_thermostat(cl); + } + return 0; } +static struct i2c_driver g4fan_driver = { + .driver = { + .name = "therm_windtunnel", + }, + .attach_adapter = do_attach, + .probe = do_probe, + .remove = do_remove, + .id_table = therm_windtunnel_id, +}; + /************************************************************************/ /* initialization / cleanup */ diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c index b92b959fe16e..529886c7a826 100644 --- a/drivers/macintosh/windfarm_lm75_sensor.c +++ b/drivers/macintosh/windfarm_lm75_sensor.c @@ -37,34 +37,22 @@ struct wf_lm75_sensor { int ds1775 : 1; int inited : 1; - struct i2c_client i2c; + struct i2c_client *i2c; struct wf_sensor sens; }; #define wf_to_lm75(c) container_of(c, struct wf_lm75_sensor, sens) -#define i2c_to_lm75(c) container_of(c, struct wf_lm75_sensor, i2c) - -static int wf_lm75_attach(struct i2c_adapter *adapter); -static int wf_lm75_detach(struct i2c_client *client); - -static struct i2c_driver wf_lm75_driver = { - .driver = { - .name = "wf_lm75", - }, - .attach_adapter = wf_lm75_attach, - .detach_client = wf_lm75_detach, -}; static int wf_lm75_get(struct wf_sensor *sr, s32 *value) { struct wf_lm75_sensor *lm = wf_to_lm75(sr); s32 data; - if (lm->i2c.adapter == NULL) + if (lm->i2c == NULL) return -ENODEV; /* Init chip if necessary */ if (!lm->inited) { - u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(&lm->i2c, 1); + u8 cfg_new, cfg = (u8)i2c_smbus_read_byte_data(lm->i2c, 1); DBG("wf_lm75: Initializing %s, cfg was: %02x\n", sr->name, cfg); @@ -73,7 +61,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value) * the firmware for now */ cfg_new = cfg & ~0x01; - i2c_smbus_write_byte_data(&lm->i2c, 1, cfg_new); + i2c_smbus_write_byte_data(lm->i2c, 1, cfg_new); lm->inited = 1; /* If we just powered it up, let's wait 200 ms */ @@ -81,7 +69,7 @@ static int wf_lm75_get(struct wf_sensor *sr, s32 *value) } /* Read temperature register */ - data = (s32)le16_to_cpu(i2c_smbus_read_word_data(&lm->i2c, 0)); + data = (s32)le16_to_cpu(i2c_smbus_read_word_data(lm->i2c, 0)); data <<= 8; *value = data; @@ -92,12 +80,6 @@ static void wf_lm75_release(struct wf_sensor *sr) { struct wf_lm75_sensor *lm = wf_to_lm75(sr); - /* check if client is registered and detach from i2c */ - if (lm->i2c.adapter) { - i2c_detach_client(&lm->i2c); - lm->i2c.adapter = NULL; - } - kfree(lm); } @@ -107,59 +89,77 @@ static struct wf_sensor_ops wf_lm75_ops = { .owner = THIS_MODULE, }; -static struct wf_lm75_sensor *wf_lm75_create(struct i2c_adapter *adapter, - u8 addr, int ds1775, - const char *loc) +static int wf_lm75_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct wf_lm75_sensor *lm; int rc; - DBG("wf_lm75: creating %s device at address 0x%02x\n", - ds1775 ? "ds1775" : "lm75", addr); - lm = kzalloc(sizeof(struct wf_lm75_sensor), GFP_KERNEL); if (lm == NULL) - return NULL; + return -ENODEV; + + lm->inited = 0; + lm->ds1775 = id->driver_data; + lm->i2c = client; + lm->sens.name = client->dev.platform_data; + lm->sens.ops = &wf_lm75_ops; + i2c_set_clientdata(client, lm); + + rc = wf_register_sensor(&lm->sens); + if (rc) { + i2c_set_clientdata(client, NULL); + kfree(lm); + } + + return rc; +} + +static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter, + u8 addr, int ds1775, + const char *loc) +{ + struct i2c_board_info info; + struct i2c_client *client; + char *name; + + DBG("wf_lm75: creating %s device at address 0x%02x\n", + ds1775 ? "ds1775" : "lm75", addr); /* Usual rant about sensor names not beeing very consistent in * the device-tree, oh well ... * Add more entries below as you deal with more setups */ if (!strcmp(loc, "Hard drive") || !strcmp(loc, "DRIVE BAY")) - lm->sens.name = "hd-temp"; + name = "hd-temp"; else if (!strcmp(loc, "Incoming Air Temp")) - lm->sens.name = "incoming-air-temp"; + name = "incoming-air-temp"; else if (!strcmp(loc, "ODD Temp")) - lm->sens.name = "optical-drive-temp"; + name = "optical-drive-temp"; else if (!strcmp(loc, "HD Temp")) - lm->sens.name = "hard-drive-temp"; + name = "hard-drive-temp"; else goto fail; - lm->inited = 0; - lm->sens.ops = &wf_lm75_ops; - lm->ds1775 = ds1775; - lm->i2c.addr = (addr >> 1) & 0x7f; - lm->i2c.adapter = adapter; - lm->i2c.driver = &wf_lm75_driver; - strncpy(lm->i2c.name, lm->sens.name, I2C_NAME_SIZE-1); - - rc = i2c_attach_client(&lm->i2c); - if (rc) { - printk(KERN_ERR "windfarm: failed to attach %s %s to i2c," - " err %d\n", ds1775 ? "ds1775" : "lm75", - lm->i2c.name, rc); - goto fail; - } + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = (addr >> 1) & 0x7f; + info.platform_data = name; + strlcpy(info.type, ds1775 ? "wf_ds1775" : "wf_lm75", I2C_NAME_SIZE); - if (wf_register_sensor(&lm->sens)) { - i2c_detach_client(&lm->i2c); + client = i2c_new_device(adapter, &info); + if (client == NULL) { + printk(KERN_ERR "windfarm: failed to attach %s %s to i2c\n", + ds1775 ? "ds1775" : "lm75", name); goto fail; } - return lm; + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return client; fail: - kfree(lm); return NULL; } @@ -202,21 +202,38 @@ static int wf_lm75_attach(struct i2c_adapter *adapter) return 0; } -static int wf_lm75_detach(struct i2c_client *client) +static int wf_lm75_remove(struct i2c_client *client) { - struct wf_lm75_sensor *lm = i2c_to_lm75(client); + struct wf_lm75_sensor *lm = i2c_get_clientdata(client); DBG("wf_lm75: i2c detatch called for %s\n", lm->sens.name); /* Mark client detached */ - lm->i2c.adapter = NULL; + lm->i2c = NULL; /* release sensor */ wf_unregister_sensor(&lm->sens); + i2c_set_clientdata(client, NULL); return 0; } +static const struct i2c_device_id wf_lm75_id[] = { + { "wf_lm75", 0 }, + { "wf_ds1775", 1 }, + { } +}; + +static struct i2c_driver wf_lm75_driver = { + .driver = { + .name = "wf_lm75", + }, + .attach_adapter = wf_lm75_attach, + .probe = wf_lm75_probe, + .remove = wf_lm75_remove, + .id_table = wf_lm75_id, +}; + static int __init wf_lm75_sensor_init(void) { /* Don't register on old machines that use therm_pm72 for now */ diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c index e207a90d6b27..e2a55ecda2b2 100644 --- a/drivers/macintosh/windfarm_max6690_sensor.c +++ b/drivers/macintosh/windfarm_max6690_sensor.c @@ -26,34 +26,22 @@ #define MAX6690_EXTERNAL_TEMP 1 struct wf_6690_sensor { - struct i2c_client i2c; + struct i2c_client *i2c; struct wf_sensor sens; }; #define wf_to_6690(x) container_of((x), struct wf_6690_sensor, sens) -#define i2c_to_6690(x) container_of((x), struct wf_6690_sensor, i2c) - -static int wf_max6690_attach(struct i2c_adapter *adapter); -static int wf_max6690_detach(struct i2c_client *client); - -static struct i2c_driver wf_max6690_driver = { - .driver = { - .name = "wf_max6690", - }, - .attach_adapter = wf_max6690_attach, - .detach_client = wf_max6690_detach, -}; static int wf_max6690_get(struct wf_sensor *sr, s32 *value) { struct wf_6690_sensor *max = wf_to_6690(sr); s32 data; - if (max->i2c.adapter == NULL) + if (max->i2c == NULL) return -ENODEV; /* chip gets initialized by firmware */ - data = i2c_smbus_read_byte_data(&max->i2c, MAX6690_EXTERNAL_TEMP); + data = i2c_smbus_read_byte_data(max->i2c, MAX6690_EXTERNAL_TEMP); if (data < 0) return data; *value = data << 16; @@ -64,10 +52,6 @@ static void wf_max6690_release(struct wf_sensor *sr) { struct wf_6690_sensor *max = wf_to_6690(sr); - if (max->i2c.adapter) { - i2c_detach_client(&max->i2c); - max->i2c.adapter = NULL; - } kfree(max); } @@ -77,19 +61,40 @@ static struct wf_sensor_ops wf_max6690_ops = { .owner = THIS_MODULE, }; -static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr, - const char *loc) +static int wf_max6690_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct wf_6690_sensor *max; - char *name; + int rc; max = kzalloc(sizeof(struct wf_6690_sensor), GFP_KERNEL); if (max == NULL) { - printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor %s: " - "no memory\n", loc); - return; + printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: " + "no memory\n"); + return -ENOMEM; + } + + max->i2c = client; + max->sens.name = client->dev.platform_data; + max->sens.ops = &wf_max6690_ops; + i2c_set_clientdata(client, max); + + rc = wf_register_sensor(&max->sens); + if (rc) { + i2c_set_clientdata(client, NULL); + kfree(max); } + return rc; +} + +static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter, + u8 addr, const char *loc) +{ + struct i2c_board_info info; + struct i2c_client *client; + char *name; + if (!strcmp(loc, "BACKSIDE")) name = "backside-temp"; else if (!strcmp(loc, "NB Ambient")) @@ -99,27 +104,26 @@ static void wf_max6690_create(struct i2c_adapter *adapter, u8 addr, else goto fail; - max->sens.ops = &wf_max6690_ops; - max->sens.name = name; - max->i2c.addr = addr >> 1; - max->i2c.adapter = adapter; - max->i2c.driver = &wf_max6690_driver; - strncpy(max->i2c.name, name, I2C_NAME_SIZE-1); + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = addr >> 1; + info.platform_data = name; + strlcpy(info.type, "wf_max6690", I2C_NAME_SIZE); - if (i2c_attach_client(&max->i2c)) { + client = i2c_new_device(adapter, &info); + if (client == NULL) { printk(KERN_ERR "windfarm: failed to attach MAX6690 sensor\n"); goto fail; } - if (wf_register_sensor(&max->sens)) { - i2c_detach_client(&max->i2c); - goto fail; - } - - return; + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return client; fail: - kfree(max); + return NULL; } static int wf_max6690_attach(struct i2c_adapter *adapter) @@ -154,16 +158,31 @@ static int wf_max6690_attach(struct i2c_adapter *adapter) return 0; } -static int wf_max6690_detach(struct i2c_client *client) +static int wf_max6690_remove(struct i2c_client *client) { - struct wf_6690_sensor *max = i2c_to_6690(client); + struct wf_6690_sensor *max = i2c_get_clientdata(client); - max->i2c.adapter = NULL; + max->i2c = NULL; wf_unregister_sensor(&max->sens); return 0; } +static const struct i2c_device_id wf_max6690_id[] = { + { "wf_max6690", 0 }, + { } +}; + +static struct i2c_driver wf_max6690_driver = { + .driver = { + .name = "wf_max6690", + }, + .attach_adapter = wf_max6690_attach, + .probe = wf_max6690_probe, + .remove = wf_max6690_remove, + .id_table = wf_max6690_id, +}; + static int __init wf_max6690_sensor_init(void) { /* Don't register on old machines that use therm_pm72 for now */ diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c index 7847e981ac33..5da729e58f99 100644 --- a/drivers/macintosh/windfarm_smu_sat.c +++ b/drivers/macintosh/windfarm_smu_sat.c @@ -39,7 +39,7 @@ struct wf_sat { struct mutex mutex; unsigned long last_read; /* jiffies when cache last updated */ u8 cache[16]; - struct i2c_client i2c; + struct i2c_client *i2c; struct device_node *node; }; @@ -54,18 +54,6 @@ struct wf_sat_sensor { }; #define wf_to_sat(c) container_of(c, struct wf_sat_sensor, sens) -#define i2c_to_sat(c) container_of(c, struct wf_sat, i2c) - -static int wf_sat_attach(struct i2c_adapter *adapter); -static int wf_sat_detach(struct i2c_client *client); - -static struct i2c_driver wf_sat_driver = { - .driver = { - .name = "wf_smu_sat", - }, - .attach_adapter = wf_sat_attach, - .detach_client = wf_sat_detach, -}; struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id, unsigned int *size) @@ -81,13 +69,13 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id, if (sat_id > 1 || (sat = sats[sat_id]) == NULL) return NULL; - err = i2c_smbus_write_word_data(&sat->i2c, 8, id << 8); + err = i2c_smbus_write_word_data(sat->i2c, 8, id << 8); if (err) { printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err); return NULL; } - err = i2c_smbus_read_word_data(&sat->i2c, 9); + err = i2c_smbus_read_word_data(sat->i2c, 9); if (err < 0) { printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n"); return NULL; @@ -105,7 +93,7 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id, return NULL; for (i = 0; i < len; i += 4) { - err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0xa, 4, data); + err = i2c_smbus_read_i2c_block_data(sat->i2c, 0xa, 4, data); if (err < 0) { printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n", err); @@ -138,7 +126,7 @@ static int wf_sat_read_cache(struct wf_sat *sat) { int err; - err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0x3f, 16, sat->cache); + err = i2c_smbus_read_i2c_block_data(sat->i2c, 0x3f, 16, sat->cache); if (err < 0) return err; sat->last_read = jiffies; @@ -161,7 +149,7 @@ static int wf_sat_get(struct wf_sensor *sr, s32 *value) int i, err; s32 val; - if (sat->i2c.adapter == NULL) + if (sat->i2c == NULL) return -ENODEV; mutex_lock(&sat->mutex); @@ -193,10 +181,6 @@ static void wf_sat_release(struct wf_sensor *sr) struct wf_sat *sat = sens->sat; if (atomic_dec_and_test(&sat->refcnt)) { - if (sat->i2c.adapter) { - i2c_detach_client(&sat->i2c); - sat->i2c.adapter = NULL; - } if (sat->nr >= 0) sats[sat->nr] = NULL; kfree(sat); @@ -212,38 +196,58 @@ static struct wf_sensor_ops wf_sat_ops = { static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev) { + struct i2c_board_info info; + struct i2c_client *client; + const u32 *reg; + u8 addr; + + reg = of_get_property(dev, "reg", NULL); + if (reg == NULL) + return; + addr = *reg; + DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr); + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = (addr >> 1) & 0x7f; + info.platform_data = dev; + strlcpy(info.type, "wf_sat", I2C_NAME_SIZE); + + client = i2c_new_device(adapter, &info); + if (client == NULL) { + printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n"); + return; + } + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); +} + +static int wf_sat_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *dev = client->dev.platform_data; struct wf_sat *sat; struct wf_sat_sensor *sens; const u32 *reg; const char *loc, *type; - u8 addr, chip, core; + u8 chip, core; struct device_node *child; int shift, cpu, index; char *name; int vsens[2], isens[2]; - reg = of_get_property(dev, "reg", NULL); - if (reg == NULL) - return; - addr = *reg; - DBG(KERN_DEBUG "wf_sat: creating sat at address %x\n", addr); - sat = kzalloc(sizeof(struct wf_sat), GFP_KERNEL); if (sat == NULL) - return; + return -ENOMEM; sat->nr = -1; sat->node = of_node_get(dev); atomic_set(&sat->refcnt, 0); mutex_init(&sat->mutex); - sat->i2c.addr = (addr >> 1) & 0x7f; - sat->i2c.adapter = adapter; - sat->i2c.driver = &wf_sat_driver; - strncpy(sat->i2c.name, "smu-sat", I2C_NAME_SIZE-1); - - if (i2c_attach_client(&sat->i2c)) { - printk(KERN_ERR "windfarm: failed to attach smu-sat to i2c\n"); - goto fail; - } + sat->i2c = client; + i2c_set_clientdata(client, sat); vsens[0] = vsens[1] = -1; isens[0] = isens[1] = -1; @@ -344,10 +348,7 @@ static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev) if (sat->nr >= 0) sats[sat->nr] = sat; - return; - - fail: - kfree(sat); + return 0; } static int wf_sat_attach(struct i2c_adapter *adapter) @@ -366,16 +367,32 @@ static int wf_sat_attach(struct i2c_adapter *adapter) return 0; } -static int wf_sat_detach(struct i2c_client *client) +static int wf_sat_remove(struct i2c_client *client) { - struct wf_sat *sat = i2c_to_sat(client); + struct wf_sat *sat = i2c_get_clientdata(client); /* XXX TODO */ - sat->i2c.adapter = NULL; + sat->i2c = NULL; + i2c_set_clientdata(client, NULL); return 0; } +static const struct i2c_device_id wf_sat_id[] = { + { "wf_sat", 0 }, + { } +}; + +static struct i2c_driver wf_sat_driver = { + .driver = { + .name = "wf_smu_sat", + }, + .attach_adapter = wf_sat_attach, + .probe = wf_sat_probe, + .remove = wf_sat_remove, + .id_table = wf_sat_id, +}; + static int __init sat_sensors_init(void) { return i2c_add_driver(&wf_sat_driver); |