3 files changed, 0 insertions, 765 deletions

diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig
index dea66ef1394d..5dcb93c0a902 100644
--- a/drivers/media/i2c/soc_camera/Kconfig
+++ b/drivers/media/i2c/soc_camera/Kconfig
@@ -1,12 +1,5 @@
 comment "soc_camera sensor drivers"
 
-config SOC_CAMERA_MT9M001
-	tristate "mt9m001 support"
-	depends on SOC_CAMERA && I2C
-	help
-	  This driver supports MT9M001 cameras from Micron, monochrome
-	  and colour models.
-
 config SOC_CAMERA_MT9M111
 	tristate "legacy soc_camera mt9m111, mt9m112 and mt9m131 support"
 	depends on SOC_CAMERA && I2C
diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile
index 94659f7aa195..a215d8b095d9 100644
--- a/drivers/media/i2c/soc_camera/Makefile
+++ b/drivers/media/i2c/soc_camera/Makefile
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_SOC_CAMERA_MT9M001)	+= soc_mt9m001.o
 obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= soc_mt9v022.o
 obj-$(CONFIG_SOC_CAMERA_OV5642)		+= soc_ov5642.o
 obj-$(CONFIG_SOC_CAMERA_OV9740)		+= soc_ov9740.o
diff --git a/drivers/media/i2c/soc_camera/soc_mt9m001.c b/drivers/media/i2c/soc_camera/soc_mt9m001.c
deleted file mode 100644
index a1a85ff838c5..000000000000
--- a/drivers/media/i2c/soc_camera/soc_mt9m001.c
+++ /dev/null
@@ -1,757 +0,0 @@
-/*
- * Driver for MT9M001 CMOS Image Sensor from Micron
- *
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/log2.h>
-#include <linux/module.h>
-
-#include <media/soc_camera.h>
-#include <media/drv-intf/soc_mediabus.h>
-#include <media/v4l2-clk.h>
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-ctrls.h>
-
-/*
- * mt9m001 i2c address 0x5d
- * The platform has to define struct i2c_board_info objects and link to them
- * from struct soc_camera_host_desc
- */
-
-/* mt9m001 selected register addresses */
-#define MT9M001_CHIP_VERSION		0x00
-#define MT9M001_ROW_START		0x01
-#define MT9M001_COLUMN_START		0x02
-#define MT9M001_WINDOW_HEIGHT		0x03
-#define MT9M001_WINDOW_WIDTH		0x04
-#define MT9M001_HORIZONTAL_BLANKING	0x05
-#define MT9M001_VERTICAL_BLANKING	0x06
-#define MT9M001_OUTPUT_CONTROL		0x07
-#define MT9M001_SHUTTER_WIDTH		0x09
-#define MT9M001_FRAME_RESTART		0x0b
-#define MT9M001_SHUTTER_DELAY		0x0c
-#define MT9M001_RESET			0x0d
-#define MT9M001_READ_OPTIONS1		0x1e
-#define MT9M001_READ_OPTIONS2		0x20
-#define MT9M001_GLOBAL_GAIN		0x35
-#define MT9M001_CHIP_ENABLE		0xF1
-
-#define MT9M001_MAX_WIDTH		1280
-#define MT9M001_MAX_HEIGHT		1024
-#define MT9M001_MIN_WIDTH		48
-#define MT9M001_MIN_HEIGHT		32
-#define MT9M001_COLUMN_SKIP		20
-#define MT9M001_ROW_SKIP		12
-
-/* MT9M001 has only one fixed colorspace per pixelcode */
-struct mt9m001_datafmt {
-	u32	code;
-	enum v4l2_colorspace		colorspace;
-};
-
-/* Find a data format by a pixel code in an array */
-static const struct mt9m001_datafmt *mt9m001_find_datafmt(
-	u32 code, const struct mt9m001_datafmt *fmt,
-	int n)
-{
-	int i;
-	for (i = 0; i < n; i++)
-		if (fmt[i].code == code)
-			return fmt + i;
-
-	return NULL;
-}
-
-static const struct mt9m001_datafmt mt9m001_colour_fmts[] = {
-	/*
-	 * Order important: first natively supported,
-	 * second supported with a GPIO extender
-	 */
-	{MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB},
-	{MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB},
-};
-
-static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = {
-	/* Order important - see above */
-	{MEDIA_BUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG},
-	{MEDIA_BUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG},
-};
-
-struct mt9m001 {
-	struct v4l2_subdev subdev;
-	struct v4l2_ctrl_handler hdl;
-	struct {
-		/* exposure/auto-exposure cluster */
-		struct v4l2_ctrl *autoexposure;
-		struct v4l2_ctrl *exposure;
-	};
-	struct v4l2_rect rect;	/* Sensor window */
-	struct v4l2_clk *clk;
-	const struct mt9m001_datafmt *fmt;
-	const struct mt9m001_datafmt *fmts;
-	int num_fmts;
-	unsigned int total_h;
-	unsigned short y_skip_top;	/* Lines to skip at the top */
-};
-
-static struct mt9m001 *to_mt9m001(const struct i2c_client *client)
-{
-	return container_of(i2c_get_clientdata(client), struct mt9m001, subdev);
-}
-
-static int reg_read(struct i2c_client *client, const u8 reg)
-{
-	return i2c_smbus_read_word_swapped(client, reg);
-}
-
-static int reg_write(struct i2c_client *client, const u8 reg,
-		     const u16 data)
-{
-	return i2c_smbus_write_word_swapped(client, reg, data);
-}
-
-static int reg_set(struct i2c_client *client, const u8 reg,
-		   const u16 data)
-{
-	int ret;
-
-	ret = reg_read(client, reg);
-	if (ret < 0)
-		return ret;
-	return reg_write(client, reg, ret | data);
-}
-
-static int reg_clear(struct i2c_client *client, const u8 reg,
-		     const u16 data)
-{
-	int ret;
-
-	ret = reg_read(client, reg);
-	if (ret < 0)
-		return ret;
-	return reg_write(client, reg, ret & ~data);
-}
-
-static int mt9m001_init(struct i2c_client *client)
-{
-	int ret;
-
-	dev_dbg(&client->dev, "%s\n", __func__);
-
-	/*
-	 * We don't know, whether platform provides reset, issue a soft reset
-	 * too. This returns all registers to their default values.
-	 */
-	ret = reg_write(client, MT9M001_RESET, 1);
-	if (!ret)
-		ret = reg_write(client, MT9M001_RESET, 0);
-
-	/* Disable chip, synchronous option update */
-	if (!ret)
-		ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0);
-
-	return ret;
-}
-
-static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	/* Switch to master "normal" mode or stop sensor readout */
-	if (reg_write(client, MT9M001_OUTPUT_CONTROL, enable ? 2 : 0) < 0)
-		return -EIO;
-	return 0;
-}
-
-static int mt9m001_set_selection(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_selection *sel)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	struct v4l2_rect rect = sel->r;
-	const u16 hblank = 9, vblank = 25;
-	int ret;
-
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
-	    sel->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	if (mt9m001->fmts == mt9m001_colour_fmts)
-		/*
-		 * Bayer format - even number of rows for simplicity,
-		 * but let the user play with the top row.
-		 */
-		rect.height = ALIGN(rect.height, 2);
-
-	/* Datasheet requirement: see register description */
-	rect.width = ALIGN(rect.width, 2);
-	rect.left = ALIGN(rect.left, 2);
-
-	soc_camera_limit_side(&rect.left, &rect.width,
-		     MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH);
-
-	soc_camera_limit_side(&rect.top, &rect.height,
-		     MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT);
-
-	mt9m001->total_h = rect.height + mt9m001->y_skip_top + vblank;
-
-	/* Blanking and start values - default... */
-	ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank);
-	if (!ret)
-		ret = reg_write(client, MT9M001_VERTICAL_BLANKING, vblank);
-
-	/*
-	 * The caller provides a supported format, as verified per
-	 * call to .set_fmt(FORMAT_TRY).
-	 */
-	if (!ret)
-		ret = reg_write(client, MT9M001_COLUMN_START, rect.left);
-	if (!ret)
-		ret = reg_write(client, MT9M001_ROW_START, rect.top);
-	if (!ret)
-		ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect.width - 1);
-	if (!ret)
-		ret = reg_write(client, MT9M001_WINDOW_HEIGHT,
-				rect.height + mt9m001->y_skip_top - 1);
-	if (!ret && v4l2_ctrl_g_ctrl(mt9m001->autoexposure) == V4L2_EXPOSURE_AUTO)
-		ret = reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h);
-
-	if (!ret)
-		mt9m001->rect = rect;
-
-	return ret;
-}
-
-static int mt9m001_get_selection(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_selection *sel)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-
-	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
-		return -EINVAL;
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		sel->r.left = MT9M001_COLUMN_SKIP;
-		sel->r.top = MT9M001_ROW_SKIP;
-		sel->r.width = MT9M001_MAX_WIDTH;
-		sel->r.height = MT9M001_MAX_HEIGHT;
-		return 0;
-	case V4L2_SEL_TGT_CROP:
-		sel->r = mt9m001->rect;
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-static int mt9m001_get_fmt(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_format *format)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	struct v4l2_mbus_framefmt *mf = &format->format;
-
-	if (format->pad)
-		return -EINVAL;
-
-	mf->width	= mt9m001->rect.width;
-	mf->height	= mt9m001->rect.height;
-	mf->code	= mt9m001->fmt->code;
-	mf->colorspace	= mt9m001->fmt->colorspace;
-	mf->field	= V4L2_FIELD_NONE;
-
-	return 0;
-}
-
-static int mt9m001_s_fmt(struct v4l2_subdev *sd,
-			 const struct mt9m001_datafmt *fmt,
-			 struct v4l2_mbus_framefmt *mf)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	struct v4l2_subdev_selection sel = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-		.target = V4L2_SEL_TGT_CROP,
-		.r.left = mt9m001->rect.left,
-		.r.top = mt9m001->rect.top,
-		.r.width = mf->width,
-		.r.height = mf->height,
-	};
-	int ret;
-
-	/* No support for scaling so far, just crop. TODO: use skipping */
-	ret = mt9m001_set_selection(sd, NULL, &sel);
-	if (!ret) {
-		mf->width	= mt9m001->rect.width;
-		mf->height	= mt9m001->rect.height;
-		mt9m001->fmt	= fmt;
-		mf->colorspace	= fmt->colorspace;
-	}
-
-	return ret;
-}
-
-static int mt9m001_set_fmt(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_format *format)
-{
-	struct v4l2_mbus_framefmt *mf = &format->format;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	const struct mt9m001_datafmt *fmt;
-
-	if (format->pad)
-		return -EINVAL;
-
-	v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH,
-		MT9M001_MAX_WIDTH, 1,
-		&mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top,
-		MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0);
-
-	if (mt9m001->fmts == mt9m001_colour_fmts)
-		mf->height = ALIGN(mf->height - 1, 2);
-
-	fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts,
-				   mt9m001->num_fmts);
-	if (!fmt) {
-		fmt = mt9m001->fmt;
-		mf->code = fmt->code;
-	}
-
-	mf->colorspace	= fmt->colorspace;
-
-	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		return mt9m001_s_fmt(sd, fmt, mf);
-	cfg->try_fmt = *mf;
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int mt9m001_g_register(struct v4l2_subdev *sd,
-			      struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (reg->reg > 0xff)
-		return -EINVAL;
-
-	reg->size = 2;
-	reg->val = reg_read(client, reg->reg);
-
-	if (reg->val > 0xffff)
-		return -EIO;
-
-	return 0;
-}
-
-static int mt9m001_s_register(struct v4l2_subdev *sd,
-			      const struct v4l2_dbg_register *reg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-
-	if (reg->reg > 0xff)
-		return -EINVAL;
-
-	if (reg_write(client, reg->reg, reg->val) < 0)
-		return -EIO;
-
-	return 0;
-}
-#endif
-
-static int mt9m001_s_power(struct v4l2_subdev *sd, int on)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-
-	return soc_camera_set_power(&client->dev, ssdd, mt9m001->clk, on);
-}
-
-static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct mt9m001 *mt9m001 = container_of(ctrl->handler,
-					       struct mt9m001, hdl);
-	s32 min, max;
-
-	switch (ctrl->id) {
-	case V4L2_CID_EXPOSURE_AUTO:
-		min = mt9m001->exposure->minimum;
-		max = mt9m001->exposure->maximum;
-		mt9m001->exposure->val =
-			(524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min;
-		break;
-	}
-	return 0;
-}
-
-static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl)
-{
-	struct mt9m001 *mt9m001 = container_of(ctrl->handler,
-					       struct mt9m001, hdl);
-	struct v4l2_subdev *sd = &mt9m001->subdev;
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct v4l2_ctrl *exp = mt9m001->exposure;
-	int data;
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		if (ctrl->val)
-			data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000);
-		else
-			data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000);
-		if (data < 0)
-			return -EIO;
-		return 0;
-
-	case V4L2_CID_GAIN:
-		/* See Datasheet Table 7, Gain settings. */
-		if (ctrl->val <= ctrl->default_value) {
-			/* Pack it into 0..1 step 0.125, register values 0..8 */
-			unsigned long range = ctrl->default_value - ctrl->minimum;
-			data = ((ctrl->val - (s32)ctrl->minimum) * 8 + range / 2) / range;
-
-			dev_dbg(&client->dev, "Setting gain %d\n", data);
-			data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
-			if (data < 0)
-				return -EIO;
-		} else {
-			/* Pack it into 1.125..15 variable step, register values 9..67 */
-			/* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */
-			unsigned long range = ctrl->maximum - ctrl->default_value - 1;
-			unsigned long gain = ((ctrl->val - (s32)ctrl->default_value - 1) *
-					       111 + range / 2) / range + 9;
-
-			if (gain <= 32)
-				data = gain;
-			else if (gain <= 64)
-				data = ((gain - 32) * 16 + 16) / 32 + 80;
-			else
-				data = ((gain - 64) * 7 + 28) / 56 + 96;
-
-			dev_dbg(&client->dev, "Setting gain from %d to %d\n",
-				 reg_read(client, MT9M001_GLOBAL_GAIN), data);
-			data = reg_write(client, MT9M001_GLOBAL_GAIN, data);
-			if (data < 0)
-				return -EIO;
-		}
-		return 0;
-
-	case V4L2_CID_EXPOSURE_AUTO:
-		if (ctrl->val == V4L2_EXPOSURE_MANUAL) {
-			unsigned long range = exp->maximum - exp->minimum;
-			unsigned long shutter = ((exp->val - (s32)exp->minimum) * 1048 +
-						 range / 2) / range + 1;
-
-			dev_dbg(&client->dev,
-				"Setting shutter width from %d to %lu\n",
-				reg_read(client, MT9M001_SHUTTER_WIDTH), shutter);
-			if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0)
-				return -EIO;
-		} else {
-			const u16 vblank = 25;
-
-			mt9m001->total_h = mt9m001->rect.height +
-				mt9m001->y_skip_top + vblank;
-			if (reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h) < 0)
-				return -EIO;
-		}
-		return 0;
-	}
-	return -EINVAL;
-}
-
-/*
- * Interface active, can use i2c. If it fails, it can indeed mean, that
- * this wasn't our capture interface, so, we wait for the right one
- */
-static int mt9m001_video_probe(struct soc_camera_subdev_desc *ssdd,
-			       struct i2c_client *client)
-{
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	s32 data;
-	unsigned long flags;
-	int ret;
-
-	ret = mt9m001_s_power(&mt9m001->subdev, 1);
-	if (ret < 0)
-		return ret;
-
-	/* Enable the chip */
-	data = reg_write(client, MT9M001_CHIP_ENABLE, 1);
-	dev_dbg(&client->dev, "write: %d\n", data);
-
-	/* Read out the chip version register */
-	data = reg_read(client, MT9M001_CHIP_VERSION);
-
-	/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
-	switch (data) {
-	case 0x8411:
-	case 0x8421:
-		mt9m001->fmts = mt9m001_colour_fmts;
-		break;
-	case 0x8431:
-		mt9m001->fmts = mt9m001_monochrome_fmts;
-		break;
-	default:
-		dev_err(&client->dev,
-			"No MT9M001 chip detected, register read %x\n", data);
-		ret = -ENODEV;
-		goto done;
-	}
-
-	mt9m001->num_fmts = 0;
-
-	/*
-	 * This is a 10bit sensor, so by default we only allow 10bit.
-	 * The platform may support different bus widths due to
-	 * different routing of the data lines.
-	 */
-	if (ssdd->query_bus_param)
-		flags = ssdd->query_bus_param(ssdd);
-	else
-		flags = SOCAM_DATAWIDTH_10;
-
-	if (flags & SOCAM_DATAWIDTH_10)
-		mt9m001->num_fmts++;
-	else
-		mt9m001->fmts++;
-
-	if (flags & SOCAM_DATAWIDTH_8)
-		mt9m001->num_fmts++;
-
-	mt9m001->fmt = &mt9m001->fmts[0];
-
-	dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data,
-		 data == 0x8431 ? "C12STM" : "C12ST");
-
-	ret = mt9m001_init(client);
-	if (ret < 0) {
-		dev_err(&client->dev, "Failed to initialise the camera\n");
-		goto done;
-	}
-
-	/* mt9m001_init() has reset the chip, returning registers to defaults */
-	ret = v4l2_ctrl_handler_setup(&mt9m001->hdl);
-
-done:
-	mt9m001_s_power(&mt9m001->subdev, 0);
-	return ret;
-}
-
-static void mt9m001_video_remove(struct soc_camera_subdev_desc *ssdd)
-{
-	if (ssdd->free_bus)
-		ssdd->free_bus(ssdd);
-}
-
-static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-
-	*lines = mt9m001->y_skip_top;
-
-	return 0;
-}
-
-static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = {
-	.g_volatile_ctrl = mt9m001_g_volatile_ctrl,
-	.s_ctrl = mt9m001_s_ctrl,
-};
-
-static const struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = {
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-	.g_register	= mt9m001_g_register,
-	.s_register	= mt9m001_s_register,
-#endif
-	.s_power	= mt9m001_s_power,
-};
-
-static int mt9m001_enum_mbus_code(struct v4l2_subdev *sd,
-		struct v4l2_subdev_pad_config *cfg,
-		struct v4l2_subdev_mbus_code_enum *code)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-
-	if (code->pad || code->index >= mt9m001->num_fmts)
-		return -EINVAL;
-
-	code->code = mt9m001->fmts[code->index].code;
-	return 0;
-}
-
-static int mt9m001_g_mbus_config(struct v4l2_subdev *sd,
-				struct v4l2_mbus_config *cfg)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
-	/* MT9M001 has all capture_format parameters fixed */
-	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
-		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
-		V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER;
-	cfg->type = V4L2_MBUS_PARALLEL;
-	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
-
-	return 0;
-}
-
-static int mt9m001_s_mbus_config(struct v4l2_subdev *sd,
-				const struct v4l2_mbus_config *cfg)
-{
-	const struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample;
-
-	if (ssdd->set_bus_param)
-		return ssdd->set_bus_param(ssdd, 1 << (bps - 1));
-
-	/*
-	 * Without board specific bus width settings we only support the
-	 * sensors native bus width
-	 */
-	return bps == 10 ? 0 : -EINVAL;
-}
-
-static const struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = {
-	.s_stream	= mt9m001_s_stream,
-	.g_mbus_config	= mt9m001_g_mbus_config,
-	.s_mbus_config	= mt9m001_s_mbus_config,
-};
-
-static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
-	.g_skip_top_lines	= mt9m001_g_skip_top_lines,
-};
-
-static const struct v4l2_subdev_pad_ops mt9m001_subdev_pad_ops = {
-	.enum_mbus_code = mt9m001_enum_mbus_code,
-	.get_selection	= mt9m001_get_selection,
-	.set_selection	= mt9m001_set_selection,
-	.get_fmt	= mt9m001_get_fmt,
-	.set_fmt	= mt9m001_set_fmt,
-};
-
-static const struct v4l2_subdev_ops mt9m001_subdev_ops = {
-	.core	= &mt9m001_subdev_core_ops,
-	.video	= &mt9m001_subdev_video_ops,
-	.sensor	= &mt9m001_subdev_sensor_ops,
-	.pad	= &mt9m001_subdev_pad_ops,
-};
-
-static int mt9m001_probe(struct i2c_client *client,
-			 const struct i2c_device_id *did)
-{
-	struct mt9m001 *mt9m001;
-	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-	int ret;
-
-	if (!ssdd) {
-		dev_err(&client->dev, "MT9M001 driver needs platform data\n");
-		return -EINVAL;
-	}
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
-		dev_warn(&adapter->dev,
-			 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
-		return -EIO;
-	}
-
-	mt9m001 = devm_kzalloc(&client->dev, sizeof(struct mt9m001), GFP_KERNEL);
-	if (!mt9m001)
-		return -ENOMEM;
-
-	v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops);
-	v4l2_ctrl_handler_init(&mt9m001->hdl, 4);
-	v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
-			V4L2_CID_VFLIP, 0, 1, 1, 0);
-	v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
-			V4L2_CID_GAIN, 0, 127, 1, 64);
-	mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops,
-			V4L2_CID_EXPOSURE, 1, 255, 1, 255);
-	/*
-	 * Simulated autoexposure. If enabled, we calculate shutter width
-	 * ourselves in the driver based on vertical blanking and frame width
-	 */
-	mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl,
-			&mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
-			V4L2_EXPOSURE_AUTO);
-	mt9m001->subdev.ctrl_handler = &mt9m001->hdl;
-	if (mt9m001->hdl.error)
-		return mt9m001->hdl.error;
-
-	v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure,
-					V4L2_EXPOSURE_MANUAL, true);
-
-	/* Second stage probe - when a capture adapter is there */
-	mt9m001->y_skip_top	= 0;
-	mt9m001->rect.left	= MT9M001_COLUMN_SKIP;
-	mt9m001->rect.top	= MT9M001_ROW_SKIP;
-	mt9m001->rect.width	= MT9M001_MAX_WIDTH;
-	mt9m001->rect.height	= MT9M001_MAX_HEIGHT;
-
-	mt9m001->clk = v4l2_clk_get(&client->dev, "mclk");
-	if (IS_ERR(mt9m001->clk)) {
-		ret = PTR_ERR(mt9m001->clk);
-		goto eclkget;
-	}
-
-	ret = mt9m001_video_probe(ssdd, client);
-	if (ret) {
-		v4l2_clk_put(mt9m001->clk);
-eclkget:
-		v4l2_ctrl_handler_free(&mt9m001->hdl);
-	}
-
-	return ret;
-}
-
-static int mt9m001_remove(struct i2c_client *client)
-{
-	struct mt9m001 *mt9m001 = to_mt9m001(client);
-	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
-
-	v4l2_clk_put(mt9m001->clk);
-	v4l2_device_unregister_subdev(&mt9m001->subdev);
-	v4l2_ctrl_handler_free(&mt9m001->hdl);
-	mt9m001_video_remove(ssdd);
-
-	return 0;
-}
-
-static const struct i2c_device_id mt9m001_id[] = {
-	{ "mt9m001", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, mt9m001_id);
-
-static struct i2c_driver mt9m001_i2c_driver = {
-	.driver = {
-		.name = "mt9m001",
-	},
-	.probe		= mt9m001_probe,
-	.remove		= mt9m001_remove,
-	.id_table	= mt9m001_id,
-};
-
-module_i2c_driver(mt9m001_i2c_driver);
-
-MODULE_DESCRIPTION("Micron MT9M001 Camera driver");
-MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>");
-MODULE_LICENSE("GPL");