summaryrefslogtreecommitdiffstats
path: root/drivers/media/pci/bt8xx/bttv-vbi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/pci/bt8xx/bttv-vbi.c')
-rw-r--r--drivers/media/pci/bt8xx/bttv-vbi.c459
1 files changed, 459 insertions, 0 deletions
diff --git a/drivers/media/pci/bt8xx/bttv-vbi.c b/drivers/media/pci/bt8xx/bttv-vbi.c
new file mode 100644
index 000000000000..b433267d9aa9
--- /dev/null
+++ b/drivers/media/pci/bt8xx/bttv-vbi.c
@@ -0,0 +1,459 @@
+/*
+
+ bttv - Bt848 frame grabber driver
+ vbi interface
+
+ (c) 2002 Gerd Knorr <kraxel@bytesex.org>
+
+ Copyright (C) 2005, 2006 Michael H. Schimek <mschimek@gmx.at>
+ Sponsored by OPQ Systems AB
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <media/v4l2-ioctl.h>
+#include <asm/io.h>
+#include "bttvp.h"
+
+/* Offset from line sync pulse leading edge (0H) to start of VBI capture,
+ in fCLKx2 pixels. According to the datasheet, VBI capture starts
+ VBI_HDELAY fCLKx1 pixels from the tailing edgeof /HRESET, and /HRESET
+ is 64 fCLKx1 pixels wide. VBI_HDELAY is set to 0, so this should be
+ (64 + 0) * 2 = 128 fCLKx2 pixels. But it's not! The datasheet is
+ Just Plain Wrong. The real value appears to be different for
+ different revisions of the bt8x8 chips, and to be affected by the
+ horizontal scaling factor. Experimentally, the value is measured
+ to be about 244. */
+#define VBI_OFFSET 244
+
+/* 2048 for compatibility with earlier driver versions. The driver
+ really stores 1024 + tvnorm->vbipack * 4 samples per line in the
+ buffer. Note tvnorm->vbipack is <= 0xFF (limit of VBIPACK_LO + HI
+ is 0x1FF DWORDs) and VBI read()s store a frame counter in the last
+ four bytes of the VBI image. */
+#define VBI_BPL 2048
+
+/* Compatibility. */
+#define VBI_DEFLINES 16
+
+static unsigned int vbibufs = 4;
+static unsigned int vbi_debug;
+
+module_param(vbibufs, int, 0444);
+module_param(vbi_debug, int, 0644);
+MODULE_PARM_DESC(vbibufs,"number of vbi buffers, range 2-32, default 4");
+MODULE_PARM_DESC(vbi_debug,"vbi code debug messages, default is 0 (no)");
+
+#ifdef dprintk
+# undef dprintk
+#endif
+#define dprintk(fmt, ...) \
+do { \
+ if (vbi_debug) \
+ pr_debug("%d: " fmt, btv->c.nr, ##__VA_ARGS__); \
+} while (0)
+
+#define IMAGE_SIZE(fmt) \
+ (((fmt)->count[0] + (fmt)->count[1]) * (fmt)->samples_per_line)
+
+/* ----------------------------------------------------------------------- */
+/* vbi risc code + mm */
+
+static int vbi_buffer_setup(struct videobuf_queue *q,
+ unsigned int *count, unsigned int *size)
+{
+ struct bttv_fh *fh = q->priv_data;
+ struct bttv *btv = fh->btv;
+
+ if (0 == *count)
+ *count = vbibufs;
+
+ *size = IMAGE_SIZE(&fh->vbi_fmt.fmt);
+
+ dprintk("setup: samples=%u start=%d,%d count=%u,%u\n",
+ fh->vbi_fmt.fmt.samples_per_line,
+ fh->vbi_fmt.fmt.start[0],
+ fh->vbi_fmt.fmt.start[1],
+ fh->vbi_fmt.fmt.count[0],
+ fh->vbi_fmt.fmt.count[1]);
+
+ return 0;
+}
+
+static int vbi_buffer_prepare(struct videobuf_queue *q,
+ struct videobuf_buffer *vb,
+ enum v4l2_field field)
+{
+ struct bttv_fh *fh = q->priv_data;
+ struct bttv *btv = fh->btv;
+ struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
+ const struct bttv_tvnorm *tvnorm;
+ unsigned int skip_lines0, skip_lines1, min_vdelay;
+ int redo_dma_risc;
+ int rc;
+
+ buf->vb.size = IMAGE_SIZE(&fh->vbi_fmt.fmt);
+ if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
+ return -EINVAL;
+
+ tvnorm = fh->vbi_fmt.tvnorm;
+
+ /* There's no VBI_VDELAY register, RISC must skip the lines
+ we don't want. With default parameters we skip zero lines
+ as earlier driver versions did. The driver permits video
+ standard changes while capturing, so we use vbi_fmt.tvnorm
+ instead of btv->tvnorm to skip zero lines after video
+ standard changes as well. */
+
+ skip_lines0 = 0;
+ skip_lines1 = 0;
+
+ if (fh->vbi_fmt.fmt.count[0] > 0)
+ skip_lines0 = max(0, (fh->vbi_fmt.fmt.start[0]
+ - tvnorm->vbistart[0]));
+ if (fh->vbi_fmt.fmt.count[1] > 0)
+ skip_lines1 = max(0, (fh->vbi_fmt.fmt.start[1]
+ - tvnorm->vbistart[1]));
+
+ redo_dma_risc = 0;
+
+ if (buf->vbi_skip[0] != skip_lines0 ||
+ buf->vbi_skip[1] != skip_lines1 ||
+ buf->vbi_count[0] != fh->vbi_fmt.fmt.count[0] ||
+ buf->vbi_count[1] != fh->vbi_fmt.fmt.count[1]) {
+ buf->vbi_skip[0] = skip_lines0;
+ buf->vbi_skip[1] = skip_lines1;
+ buf->vbi_count[0] = fh->vbi_fmt.fmt.count[0];
+ buf->vbi_count[1] = fh->vbi_fmt.fmt.count[1];
+ redo_dma_risc = 1;
+ }
+
+ if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+ redo_dma_risc = 1;
+ if (0 != (rc = videobuf_iolock(q, &buf->vb, NULL)))
+ goto fail;
+ }
+
+ if (redo_dma_risc) {
+ unsigned int bpl, padding, offset;
+ struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
+ bpl = 2044; /* max. vbipack */
+ padding = VBI_BPL - bpl;
+
+ if (fh->vbi_fmt.fmt.count[0] > 0) {
+ rc = bttv_risc_packed(btv, &buf->top,
+ dma->sglist,
+ /* offset */ 0, bpl,
+ padding, skip_lines0,
+ fh->vbi_fmt.fmt.count[0]);
+ if (0 != rc)
+ goto fail;
+ }
+
+ if (fh->vbi_fmt.fmt.count[1] > 0) {
+ offset = fh->vbi_fmt.fmt.count[0] * VBI_BPL;
+
+ rc = bttv_risc_packed(btv, &buf->bottom,
+ dma->sglist,
+ offset, bpl,
+ padding, skip_lines1,
+ fh->vbi_fmt.fmt.count[1]);
+ if (0 != rc)
+ goto fail;
+ }
+ }
+
+ /* VBI capturing ends at VDELAY, start of video capturing,
+ no matter where the RISC program ends. VDELAY minimum is 2,
+ bounds.top is the corresponding first field line number
+ times two. VDELAY counts half field lines. */
+ min_vdelay = MIN_VDELAY;
+ if (fh->vbi_fmt.end >= tvnorm->cropcap.bounds.top)
+ min_vdelay += fh->vbi_fmt.end - tvnorm->cropcap.bounds.top;
+
+ /* For bttv_buffer_activate_vbi(). */
+ buf->geo.vdelay = min_vdelay;
+
+ buf->vb.state = VIDEOBUF_PREPARED;
+ buf->vb.field = field;
+ dprintk("buf prepare %p: top=%p bottom=%p field=%s\n",
+ vb, &buf->top, &buf->bottom,
+ v4l2_field_names[buf->vb.field]);
+ return 0;
+
+ fail:
+ bttv_dma_free(q,btv,buf);
+ return rc;
+}
+
+static void
+vbi_buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct bttv_fh *fh = q->priv_data;
+ struct bttv *btv = fh->btv;
+ struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
+
+ dprintk("queue %p\n",vb);
+ buf->vb.state = VIDEOBUF_QUEUED;
+ list_add_tail(&buf->vb.queue,&btv->vcapture);
+ if (NULL == btv->cvbi) {
+ fh->btv->loop_irq |= 4;
+ bttv_set_dma(btv,0x0c);
+ }
+}
+
+static void vbi_buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+ struct bttv_fh *fh = q->priv_data;
+ struct bttv *btv = fh->btv;
+ struct bttv_buffer *buf = container_of(vb,struct bttv_buffer,vb);
+
+ dprintk("free %p\n",vb);
+ bttv_dma_free(q,fh->btv,buf);
+}
+
+struct videobuf_queue_ops bttv_vbi_qops = {
+ .buf_setup = vbi_buffer_setup,
+ .buf_prepare = vbi_buffer_prepare,
+ .buf_queue = vbi_buffer_queue,
+ .buf_release = vbi_buffer_release,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int try_fmt(struct v4l2_vbi_format *f, const struct bttv_tvnorm *tvnorm,
+ __s32 crop_start)
+{
+ __s32 min_start, max_start, max_end, f2_offset;
+ unsigned int i;
+
+ /* For compatibility with earlier driver versions we must pretend
+ the VBI and video capture window may overlap. In reality RISC
+ magic aborts VBI capturing at the first line of video capturing,
+ leaving the rest of the buffer unchanged, usually all zero.
+ VBI capturing must always start before video capturing. >> 1
+ because cropping counts field lines times two. */
+ min_start = tvnorm->vbistart[0];
+ max_start = (crop_start >> 1) - 1;
+ max_end = (tvnorm->cropcap.bounds.top
+ + tvnorm->cropcap.bounds.height) >> 1;
+
+ if (min_start > max_start)
+ return -EBUSY;
+
+ BUG_ON(max_start >= max_end);
+
+ f->sampling_rate = tvnorm->Fsc;
+ f->samples_per_line = VBI_BPL;
+ f->sample_format = V4L2_PIX_FMT_GREY;
+ f->offset = VBI_OFFSET;
+
+ f2_offset = tvnorm->vbistart[1] - tvnorm->vbistart[0];
+
+ for (i = 0; i < 2; ++i) {
+ if (0 == f->count[i]) {
+ /* No data from this field. We leave f->start[i]
+ alone because VIDIOCSVBIFMT is w/o and EINVALs
+ when a driver does not support exactly the
+ requested parameters. */
+ } else {
+ s64 start, count;
+
+ start = clamp(f->start[i], min_start, max_start);
+ /* s64 to prevent overflow. */
+ count = (s64) f->start[i] + f->count[i] - start;
+ f->start[i] = start;
+ f->count[i] = clamp(count, (s64) 1,
+ max_end - start);
+ }
+
+ min_start += f2_offset;
+ max_start += f2_offset;
+ max_end += f2_offset;
+ }
+
+ if (0 == (f->count[0] | f->count[1])) {
+ /* As in earlier driver versions. */
+ f->start[0] = tvnorm->vbistart[0];
+ f->start[1] = tvnorm->vbistart[1];
+ f->count[0] = 1;
+ f->count[1] = 1;
+ }
+
+ f->flags = 0;
+
+ f->reserved[0] = 0;
+ f->reserved[1] = 0;
+
+ return 0;
+}
+
+int bttv_try_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt)
+{
+ struct bttv_fh *fh = f;
+ struct bttv *btv = fh->btv;
+ const struct bttv_tvnorm *tvnorm;
+ __s32 crop_start;
+
+ mutex_lock(&btv->lock);
+
+ tvnorm = &bttv_tvnorms[btv->tvnorm];
+ crop_start = btv->crop_start;
+
+ mutex_unlock(&btv->lock);
+
+ return try_fmt(&frt->fmt.vbi, tvnorm, crop_start);
+}
+
+
+int bttv_s_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt)
+{
+ struct bttv_fh *fh = f;
+ struct bttv *btv = fh->btv;
+ const struct bttv_tvnorm *tvnorm;
+ __s32 start1, end;
+ int rc;
+
+ mutex_lock(&btv->lock);
+
+ rc = -EBUSY;
+ if (fh->resources & RESOURCE_VBI)
+ goto fail;
+
+ tvnorm = &bttv_tvnorms[btv->tvnorm];
+
+ rc = try_fmt(&frt->fmt.vbi, tvnorm, btv->crop_start);
+ if (0 != rc)
+ goto fail;
+
+ start1 = frt->fmt.vbi.start[1] - tvnorm->vbistart[1] +
+ tvnorm->vbistart[0];
+
+ /* First possible line of video capturing. Should be
+ max(f->start[0] + f->count[0], start1 + f->count[1]) * 2
+ when capturing both fields. But for compatibility we must
+ pretend the VBI and video capture window may overlap,
+ so end = start + 1, the lowest possible value, times two
+ because vbi_fmt.end counts field lines times two. */
+ end = max(frt->fmt.vbi.start[0], start1) * 2 + 2;
+
+ mutex_lock(&fh->vbi.vb_lock);
+
+ fh->vbi_fmt.fmt = frt->fmt.vbi;
+ fh->vbi_fmt.tvnorm = tvnorm;
+ fh->vbi_fmt.end = end;
+
+ mutex_unlock(&fh->vbi.vb_lock);
+
+ rc = 0;
+
+ fail:
+ mutex_unlock(&btv->lock);
+
+ return rc;
+}
+
+
+int bttv_g_fmt_vbi_cap(struct file *file, void *f, struct v4l2_format *frt)
+{
+ struct bttv_fh *fh = f;
+ const struct bttv_tvnorm *tvnorm;
+
+ frt->fmt.vbi = fh->vbi_fmt.fmt;
+
+ tvnorm = &bttv_tvnorms[fh->btv->tvnorm];
+
+ if (tvnorm != fh->vbi_fmt.tvnorm) {
+ __s32 max_end;
+ unsigned int i;
+
+ /* As in vbi_buffer_prepare() this imitates the
+ behaviour of earlier driver versions after video
+ standard changes, with default parameters anyway. */
+
+ max_end = (tvnorm->cropcap.bounds.top
+ + tvnorm->cropcap.bounds.height) >> 1;
+
+ frt->fmt.vbi.sampling_rate = tvnorm->Fsc;
+
+ for (i = 0; i < 2; ++i) {
+ __s32 new_start;
+
+ new_start = frt->fmt.vbi.start[i]
+ + tvnorm->vbistart[i]
+ - fh->vbi_fmt.tvnorm->vbistart[i];
+
+ frt->fmt.vbi.start[i] = min(new_start, max_end - 1);
+ frt->fmt.vbi.count[i] =
+ min((__s32) frt->fmt.vbi.count[i],
+ max_end - frt->fmt.vbi.start[i]);
+
+ max_end += tvnorm->vbistart[1]
+ - tvnorm->vbistart[0];
+ }
+ }
+ return 0;
+}
+
+void bttv_vbi_fmt_reset(struct bttv_vbi_fmt *f, unsigned int norm)
+{
+ const struct bttv_tvnorm *tvnorm;
+ unsigned int real_samples_per_line;
+ unsigned int real_count;
+
+ tvnorm = &bttv_tvnorms[norm];
+
+ f->fmt.sampling_rate = tvnorm->Fsc;
+ f->fmt.samples_per_line = VBI_BPL;
+ f->fmt.sample_format = V4L2_PIX_FMT_GREY;
+ f->fmt.offset = VBI_OFFSET;
+ f->fmt.start[0] = tvnorm->vbistart[0];
+ f->fmt.start[1] = tvnorm->vbistart[1];
+ f->fmt.count[0] = VBI_DEFLINES;
+ f->fmt.count[1] = VBI_DEFLINES;
+ f->fmt.flags = 0;
+ f->fmt.reserved[0] = 0;
+ f->fmt.reserved[1] = 0;
+
+ /* For compatibility the buffer size must be 2 * VBI_DEFLINES *
+ VBI_BPL regardless of the current video standard. */
+ real_samples_per_line = 1024 + tvnorm->vbipack * 4;
+ real_count = ((tvnorm->cropcap.defrect.top >> 1)
+ - tvnorm->vbistart[0]);
+
+ BUG_ON(real_samples_per_line > VBI_BPL);
+ BUG_ON(real_count > VBI_DEFLINES);
+
+ f->tvnorm = tvnorm;
+
+ /* See bttv_vbi_fmt_set(). */
+ f->end = tvnorm->vbistart[0] * 2 + 2;
+}
+
+/* ----------------------------------------------------------------------- */
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 07:09:04 +0100