diff options
Diffstat (limited to 'drivers/media/rc/ene_ir.c')
| -rw-r--r-- | drivers/media/rc/ene_ir.c | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index 885abdddfaa8..1ac49139158d 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -446,27 +446,27 @@ static void ene_rx_setup(struct ene_device *dev) select_timeout: if (dev->rx_fan_input_inuse) { - dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); + dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); /* Fan input doesn't support timeouts, it just ends the input with a maximum sample */ dev->rdev->min_timeout = dev->rdev->max_timeout = - MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * + US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * ENE_FW_SAMPLE_PERIOD_FAN); } else { - dev->rdev->rx_resolution = MS_TO_NS(sample_period); + dev->rdev->rx_resolution = US_TO_NS(sample_period); /* Theoreticly timeout is unlimited, but we cap it * because it was seen that on one device, it * would stop sending spaces after around 250 msec. * Besides, this is close to 2^32 anyway and timeout is u32. */ - dev->rdev->min_timeout = MS_TO_NS(127 * sample_period); - dev->rdev->max_timeout = MS_TO_NS(200000); + dev->rdev->min_timeout = US_TO_NS(127 * sample_period); + dev->rdev->max_timeout = US_TO_NS(200000); } if (dev->hw_learning_and_tx_capable) - dev->rdev->tx_resolution = MS_TO_NS(sample_period); + dev->rdev->tx_resolution = US_TO_NS(sample_period); if (dev->rdev->timeout > dev->rdev->max_timeout) dev->rdev->timeout = dev->rdev->max_timeout; @@ -801,7 +801,7 @@ static irqreturn_t ene_isr(int irq, void *data) dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); - ev.duration = MS_TO_NS(hw_sample); + ev.duration = US_TO_NS(hw_sample); ev.pulse = pulse; ir_raw_event_store_with_filter(dev->rdev, &ev); } @@ -821,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev) dev->learning_mode_enabled = learning_mode_force; /* Set reasonable default timeout */ - dev->rdev->timeout = MS_TO_NS(150000); + dev->rdev->timeout = US_TO_NS(150000); } /* Upload all hardware settings at once. Used at load and resume time */ |