diff options
Diffstat (limited to 'drivers/media/usb/dvb-usb')
62 files changed, 31656 insertions, 0 deletions
diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig new file mode 100644 index 000000000000..fa0b2931d305 --- /dev/null +++ b/drivers/media/usb/dvb-usb/Kconfig @@ -0,0 +1,313 @@ +config DVB_USB + tristate "Support for various USB DVB devices" + depends on DVB_CORE && USB && I2C && RC_CORE + help + By enabling this you will be able to choose the various supported + USB1.1 and USB2.0 DVB devices. + + Almost every USB device needs a firmware, please look into + <file:Documentation/dvb/README.dvb-usb>. + + For a complete list of supported USB devices see the LinuxTV DVB Wiki: + <http://www.linuxtv.org/wiki/index.php/DVB_USB> + + Say Y if you own a USB DVB device. + +config DVB_USB_DEBUG + bool "Enable extended debug support for all DVB-USB devices" + depends on DVB_USB + help + Say Y if you want to enable debugging. See modinfo dvb-usb (and the + appropriate drivers) for debug levels. + +config DVB_USB_A800 + tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" + depends on DVB_USB + select DVB_DIB3000MC + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. + +config DVB_USB_DIBUSB_MB + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB3000MB + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by + DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. + + For an up-to-date list of devices supported by this driver, have a look + on the Linux-DVB Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIBUSB_MB_FAULTY + bool "Support faulty USB IDs" + depends on DVB_USB_DIBUSB_MB + help + Support for faulty USB IDs due to an invalid EEPROM on some Artec devices. + +config DVB_USB_DIBUSB_MC + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" + depends on DVB_USB + select DVB_DIB3000MC + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB2.0 DVB-T receivers based on reference designs made by + DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. + + For an up-to-date list of devices supported by this driver, have a look + on the Linux-DVB Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIB0700 + tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" + depends on DVB_USB + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT + select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT + help + Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The + USB bridge is also present in devices having the DiB7700 DVB-T-USB + silicon. This chip can be found in devices offered by Hauppauge, + Avermedia and other big and small companies. + + For an up-to-date list of devices supported by this driver, have a look + on the LinuxTV Wiki at www.linuxtv.org. + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_UMT_010 + tristate "HanfTek UMT-010 DVB-T USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB3000MC + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. + +config DVB_USB_CXUSB + tristate "Conexant USB2.0 hybrid reference design support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT + select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ATBM8830 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LGS8GXX if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MAX2165 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Conexant USB2.0 hybrid reference design. + Currently, only DVB and ATSC modes are supported, analog mode + shall be added in the future. Devices that require this module: + + Medion MD95700 hybrid USB2.0 device. + DViCO FusionHDTV (Bluebird) USB2.0 devices + +config DVB_USB_M920X + tristate "Uli m920x DVB-T USB2.0 support" + depends on DVB_USB + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. + Currently, only devices with a product id of + "DTV USB MINI" (in cold state) are supported. + Firmware required. + +config DVB_USB_DIGITV + tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. + +config DVB_USB_VP7045 + tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + + TwinhanDTV Alpha (stick) (VP-7045), + TwinhanDTV MagicBox II (VP-7046), + DigitalNow TinyUSB 2 DVB-t, + DigitalRise USB 2.0 Ter (Beetle) and + TYPHOON DVB-T USB DRIVE + + DVB-T USB2.0 receivers. + +config DVB_USB_VP702X + tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + + TwinhanDTV StarBox, + DigitalRise USB Starbox and + TYPHOON DVB-S USB 2.0 BOX + + DVB-S USB2.0 receivers. + +config DVB_USB_GP8PSK + tristate "GENPIX 8PSK->USB module support" + depends on DVB_USB + help + Say Y here to support the + GENPIX 8psk module + + DVB-S USB2.0 receivers. + +config DVB_USB_NOVA_T_USB2 + tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" + depends on DVB_USB + select DVB_DIB3000MC + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. + +config DVB_USB_TTUSB2 + tristate "Pinnacle 400e DVB-S USB2.0 support" + depends on DVB_USB + select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT + select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The + firmware protocol used by this module is similar to the one used by the + old ttusb-driver - that's why the module is called dvb-usb-ttusb2. + +config DVB_USB_DTT200U + tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" + depends on DVB_USB + help + Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. + + The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). + + The WT-220U and its clones are pen-sized. + +config DVB_USB_OPERA1 + tristate "Opera1 DVB-S USB2.0 receiver" + depends on DVB_USB + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Opera DVB-S USB2.0 receiver. + +config DVB_USB_AF9005 + tristate "Afatech AF9005 DVB-T USB1.1 support" + depends on DVB_USB + select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver + and the TerraTec Cinergy T USB XE (Rev.1) + +config DVB_USB_AF9005_REMOTE + tristate "Afatech AF9005 default remote control support" + depends on DVB_USB_AF9005 + help + Say Y here to support the default remote control decoding for the + Afatech AF9005 based receiver. + +config DVB_USB_PCTV452E + tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600" + depends on DVB_USB + select TTPCI_EEPROM + select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + help + Support for external USB adapter designed by Pinnacle, + shipped under the brand name 'PCTV HDTV Pro USB'. + Also supports TT Connect S2-3600/3650 cards. + Say Y if you own such a device and want to use it. + +config DVB_USB_DW2102 + tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support" + depends on DVB_USB + select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT + select DVB_SI21XX if MEDIA_SUBDRV_AUTOSELECT + select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MT312 if MEDIA_SUBDRV_AUTOSELECT + select DVB_ZL10039 if MEDIA_SUBDRV_AUTOSELECT + select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the DvbWorld, TeVii, Prof DVB-S/S2 USB2.0 + receivers. + +config DVB_USB_CINERGY_T2 + tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" + depends on DVB_USB + help + Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers + + Say Y if you own such a device and want to use it. + +config DVB_USB_DTV5100 + tristate "AME DTV-5100 USB2.0 DVB-T support" + depends on DVB_USB + select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. + +config DVB_USB_FRIIO + tristate "Friio ISDB-T USB2.0 Receiver support" + depends on DVB_USB + help + Say Y here to support the Japanese DTV receiver Friio. + +config DVB_USB_AZ6027 + tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support" + depends on DVB_USB + select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT + select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the AZ6027 device + +config DVB_USB_TECHNISAT_USB2 + tristate "Technisat DVB-S/S2 USB2.0 support" + depends on DVB_USB + select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT + select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT + help + Say Y here to support the Technisat USB2 DVB-S/S2 device diff --git a/drivers/media/usb/dvb-usb/Makefile b/drivers/media/usb/dvb-usb/Makefile new file mode 100644 index 000000000000..acdd1efd4e74 --- /dev/null +++ b/drivers/media/usb/dvb-usb/Makefile @@ -0,0 +1,83 @@ +dvb-usb-objs += dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o +dvb-usb-objs += dvb-usb-dvb.o dvb-usb-remote.o usb-urb.o +obj-$(CONFIG_DVB_USB) += dvb-usb.o + +dvb-usb-vp7045-objs := vp7045.o vp7045-fe.o +obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o + +dvb-usb-vp702x-objs := vp702x.o vp702x-fe.o +obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o + +dvb-usb-gp8psk-objs := gp8psk.o gp8psk-fe.o +obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o + +dvb-usb-dtt200u-objs := dtt200u.o dtt200u-fe.o +obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o + +dvb-usb-dibusb-common-objs := dibusb-common.o + +dvb-usb-a800-objs := a800.o +obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o + +dvb-usb-dibusb-mb-objs := dibusb-mb.o +obj-$(CONFIG_DVB_USB_DIBUSB_MB) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mb.o + +dvb-usb-dibusb-mc-objs := dibusb-mc.o +obj-$(CONFIG_DVB_USB_DIBUSB_MC) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mc.o + +dvb-usb-nova-t-usb2-objs := nova-t-usb2.o +obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2.o + +dvb-usb-umt-010-objs := umt-010.o +obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o + +dvb-usb-m920x-objs := m920x.o +obj-$(CONFIG_DVB_USB_M920X) += dvb-usb-m920x.o + +dvb-usb-digitv-objs := digitv.o +obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o + +dvb-usb-cxusb-objs := cxusb.o +obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o + +dvb-usb-ttusb2-objs := ttusb2.o +obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o + +dvb-usb-dib0700-objs := dib0700_core.o dib0700_devices.o +obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o + +dvb-usb-opera-objs := opera1.o +obj-$(CONFIG_DVB_USB_OPERA1) += dvb-usb-opera.o + +dvb-usb-af9005-objs := af9005.o af9005-fe.o +obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o + +dvb-usb-af9005-remote-objs := af9005-remote.o +obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o + +dvb-usb-pctv452e-objs := pctv452e.o +obj-$(CONFIG_DVB_USB_PCTV452E) += dvb-usb-pctv452e.o + +dvb-usb-dw2102-objs := dw2102.o +obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o + +dvb-usb-dtv5100-objs := dtv5100.o +obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o + +dvb-usb-cinergyT2-objs := cinergyT2-core.o cinergyT2-fe.o +obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o + +dvb-usb-friio-objs := friio.o friio-fe.o +obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o + +dvb-usb-az6027-objs := az6027.o +obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o + +dvb-usb-technisat-usb2-objs := technisat-usb2.o +obj-$(CONFIG_DVB_USB_TECHNISAT_USB2) += dvb-usb-technisat-usb2.o + +ccflags-y += -I$(srctree)/drivers/media/dvb-core +ccflags-y += -I$(srctree)/drivers/media/dvb-frontends/ +# due to tuner-xc3028 +ccflags-y += -I$(srctree)/drivers/media/tuners +ccflags-y += -I$(srctree)/drivers/media/pci/ttpci diff --git a/drivers/media/usb/dvb-usb/a800.c b/drivers/media/usb/dvb-usb/a800.c new file mode 100644 index 000000000000..8d7fef84afd8 --- /dev/null +++ b/drivers/media/usb/dvb-usb/a800.c @@ -0,0 +1,191 @@ +/* DVB USB framework compliant Linux driver for the AVerMedia AverTV DVB-T + * USB2.0 (A800) DVB-T receiver. + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to + * - AVerMedia who kindly provided information and + * - Glen Harris who suffered from my mistakes during development. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define deb_rc(args...) dprintk(debug,0x01,args) + +static int a800_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + /* do nothing for the AVerMedia */ + return 0; +} + +/* assure to put cold to 0 for iManufacturer == 1 */ +static int a800_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, int *cold) +{ + *cold = udev->descriptor.iManufacturer != 1; + return 0; +} + +static struct rc_map_table rc_map_a800_table[] = { + { 0x0201, KEY_MODE }, /* SOURCE */ + { 0x0200, KEY_POWER2 }, /* POWER */ + { 0x0205, KEY_1 }, /* 1 */ + { 0x0206, KEY_2 }, /* 2 */ + { 0x0207, KEY_3 }, /* 3 */ + { 0x0209, KEY_4 }, /* 4 */ + { 0x020a, KEY_5 }, /* 5 */ + { 0x020b, KEY_6 }, /* 6 */ + { 0x020d, KEY_7 }, /* 7 */ + { 0x020e, KEY_8 }, /* 8 */ + { 0x020f, KEY_9 }, /* 9 */ + { 0x0212, KEY_LEFT }, /* L / DISPLAY */ + { 0x0211, KEY_0 }, /* 0 */ + { 0x0213, KEY_RIGHT }, /* R / CH RTN */ + { 0x0217, KEY_CAMERA }, /* SNAP SHOT */ + { 0x0210, KEY_LAST }, /* 16-CH PREV */ + { 0x021e, KEY_VOLUMEDOWN }, /* VOL DOWN */ + { 0x020c, KEY_ZOOM }, /* FULL SCREEN */ + { 0x021f, KEY_VOLUMEUP }, /* VOL UP */ + { 0x0214, KEY_MUTE }, /* MUTE */ + { 0x0208, KEY_AUDIO }, /* AUDIO */ + { 0x0219, KEY_RECORD }, /* RECORD */ + { 0x0218, KEY_PLAY }, /* PLAY */ + { 0x021b, KEY_STOP }, /* STOP */ + { 0x021a, KEY_PLAYPAUSE }, /* TIMESHIFT / PAUSE */ + { 0x021d, KEY_BACK }, /* << / RED */ + { 0x021c, KEY_FORWARD }, /* >> / YELLOW */ + { 0x0203, KEY_TEXT }, /* TELETEXT */ + { 0x0204, KEY_EPG }, /* EPG */ + { 0x0215, KEY_MENU }, /* MENU */ + + { 0x0303, KEY_CHANNELUP }, /* CH UP */ + { 0x0302, KEY_CHANNELDOWN }, /* CH DOWN */ + { 0x0301, KEY_FIRST }, /* |<< / GREEN */ + { 0x0300, KEY_LAST }, /* >>| / BLUE */ + +}; + +static int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + int ret; + u8 *key = kmalloc(5, GFP_KERNEL); + if (!key) + return -ENOMEM; + + if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0), + 0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5, + 2000) != 5) { + ret = -ENODEV; + goto out; + } + + /* call the universal NEC remote processor, to find out the key's state and event */ + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + ret = 0; +out: + kfree(key); + return ret; +} + +/* USB Driver stuff */ +static struct dvb_usb_device_properties a800_properties; + +static int a800_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &a800_properties, + THIS_MODULE, NULL, adapter_nr); +} + +/* do not change the order of the ID table */ +static struct usb_device_id a800_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, a800_table); + +static struct dvb_usb_device_properties a800_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-avertv-a800-02.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + }, + }, + + .power_ctrl = a800_power_ctrl, + .identify_state = a800_identify_state, + + .rc.legacy = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_map_table = rc_map_a800_table, + .rc_map_size = ARRAY_SIZE(rc_map_a800_table), + .rc_query = a800_rc_query, + }, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + .num_device_descs = 1, + .devices = { + { "AVerMedia AverTV DVB-T USB 2.0 (A800)", + { &a800_table[0], NULL }, + { &a800_table[1], NULL }, + }, + } +}; + +static struct usb_driver a800_driver = { + .name = "dvb_usb_a800", + .probe = a800_probe, + .disconnect = dvb_usb_device_exit, + .id_table = a800_table, +}; + +module_usb_driver(a800_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("AVerMedia AverTV DVB-T USB 2.0 (A800)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/af9005-fe.c b/drivers/media/usb/dvb-usb/af9005-fe.c new file mode 100644 index 000000000000..740f3f496f12 --- /dev/null +++ b/drivers/media/usb/dvb-usb/af9005-fe.c @@ -0,0 +1,1487 @@ +/* Frontend part of the Linux driver for the Afatech 9005 + * USB1.1 DVB-T receiver. + * + * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "af9005.h" +#include "af9005-script.h" +#include "mt2060.h" +#include "qt1010.h" +#include <asm/div64.h> + +struct af9005_fe_state { + struct dvb_usb_device *d; + fe_status_t stat; + + /* retraining parameters */ + u32 original_fcw; + u16 original_rf_top; + u16 original_if_top; + u16 original_if_min; + u16 original_aci0_if_top; + u16 original_aci1_if_top; + u16 original_aci0_if_min; + u8 original_if_unplug_th; + u8 original_rf_unplug_th; + u8 original_dtop_if_unplug_th; + u8 original_dtop_rf_unplug_th; + + /* statistics */ + u32 pre_vit_error_count; + u32 pre_vit_bit_count; + u32 ber; + u32 post_vit_error_count; + u32 post_vit_bit_count; + u32 unc; + u16 abort_count; + + int opened; + int strong; + unsigned long next_status_check; + struct dvb_frontend frontend; +}; + +static int af9005_write_word_agc(struct dvb_usb_device *d, u16 reghi, + u16 reglo, u8 pos, u8 len, u16 value) +{ + int ret; + + if ((ret = af9005_write_ofdm_register(d, reglo, (u8) (value & 0xff)))) + return ret; + return af9005_write_register_bits(d, reghi, pos, len, + (u8) ((value & 0x300) >> 8)); +} + +static int af9005_read_word_agc(struct dvb_usb_device *d, u16 reghi, + u16 reglo, u8 pos, u8 len, u16 * value) +{ + int ret; + u8 temp0, temp1; + + if ((ret = af9005_read_ofdm_register(d, reglo, &temp0))) + return ret; + if ((ret = af9005_read_ofdm_register(d, reghi, &temp1))) + return ret; + switch (pos) { + case 0: + *value = ((u16) (temp1 & 0x03) << 8) + (u16) temp0; + break; + case 2: + *value = ((u16) (temp1 & 0x0C) << 6) + (u16) temp0; + break; + case 4: + *value = ((u16) (temp1 & 0x30) << 4) + (u16) temp0; + break; + case 6: + *value = ((u16) (temp1 & 0xC0) << 2) + (u16) temp0; + break; + default: + err("invalid pos in read word agc"); + return -EINVAL; + } + return 0; + +} + +static int af9005_is_fecmon_available(struct dvb_frontend *fe, int *available) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + int ret; + u8 temp; + + *available = false; + + ret = af9005_read_register_bits(state->d, xd_p_fec_vtb_rsd_mon_en, + fec_vtb_rsd_mon_en_pos, + fec_vtb_rsd_mon_en_len, &temp); + if (ret) + return ret; + if (temp & 1) { + ret = + af9005_read_register_bits(state->d, + xd_p_reg_ofsm_read_rbc_en, + reg_ofsm_read_rbc_en_pos, + reg_ofsm_read_rbc_en_len, &temp); + if (ret) + return ret; + if ((temp & 1) == 0) + *available = true; + + } + return 0; +} + +static int af9005_get_post_vit_err_cw_count(struct dvb_frontend *fe, + u32 * post_err_count, + u32 * post_cw_count, + u16 * abort_count) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + int ret; + u32 err_count; + u32 cw_count; + u8 temp, temp0, temp1, temp2; + u16 loc_abort_count; + + *post_err_count = 0; + *post_cw_count = 0; + + /* check if error bit count is ready */ + ret = + af9005_read_register_bits(state->d, xd_r_fec_rsd_ber_rdy, + fec_rsd_ber_rdy_pos, fec_rsd_ber_rdy_len, + &temp); + if (ret) + return ret; + if (!temp) { + deb_info("rsd counter not ready\n"); + return 100; + } + /* get abort count */ + ret = + af9005_read_ofdm_register(state->d, + xd_r_fec_rsd_abort_packet_cnt_7_0, + &temp0); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, + xd_r_fec_rsd_abort_packet_cnt_15_8, + &temp1); + if (ret) + return ret; + loc_abort_count = ((u16) temp1 << 8) + temp0; + + /* get error count */ + ret = + af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_7_0, + &temp0); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_15_8, + &temp1); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, xd_r_fec_rsd_bit_err_cnt_23_16, + &temp2); + if (ret) + return ret; + err_count = ((u32) temp2 << 16) + ((u32) temp1 << 8) + temp0; + *post_err_count = err_count - (u32) loc_abort_count *8 * 8; + + /* get RSD packet number */ + ret = + af9005_read_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_7_0, + &temp0); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_15_8, + &temp1); + if (ret) + return ret; + cw_count = ((u32) temp1 << 8) + temp0; + if (cw_count == 0) { + err("wrong RSD packet count"); + return -EIO; + } + deb_info("POST abort count %d err count %d rsd packets %d\n", + loc_abort_count, err_count, cw_count); + *post_cw_count = cw_count - (u32) loc_abort_count; + *abort_count = loc_abort_count; + return 0; + +} + +static int af9005_get_post_vit_ber(struct dvb_frontend *fe, + u32 * post_err_count, u32 * post_cw_count, + u16 * abort_count) +{ + u32 loc_cw_count = 0, loc_err_count; + u16 loc_abort_count = 0; + int ret; + + ret = + af9005_get_post_vit_err_cw_count(fe, &loc_err_count, &loc_cw_count, + &loc_abort_count); + if (ret) + return ret; + *post_err_count = loc_err_count; + *post_cw_count = loc_cw_count * 204 * 8; + *abort_count = loc_abort_count; + + return 0; +} + +static int af9005_get_pre_vit_err_bit_count(struct dvb_frontend *fe, + u32 * pre_err_count, + u32 * pre_bit_count) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + u8 temp, temp0, temp1, temp2; + u32 super_frame_count, x, bits; + int ret; + + ret = + af9005_read_register_bits(state->d, xd_r_fec_vtb_ber_rdy, + fec_vtb_ber_rdy_pos, fec_vtb_ber_rdy_len, + &temp); + if (ret) + return ret; + if (!temp) { + deb_info("viterbi counter not ready\n"); + return 101; /* ERR_APO_VTB_COUNTER_NOT_READY; */ + } + ret = + af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_7_0, + &temp0); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_15_8, + &temp1); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, xd_r_fec_vtb_err_bit_cnt_23_16, + &temp2); + if (ret) + return ret; + *pre_err_count = ((u32) temp2 << 16) + ((u32) temp1 << 8) + temp0; + + ret = + af9005_read_ofdm_register(state->d, xd_p_fec_super_frm_unit_7_0, + &temp0); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8, + &temp1); + if (ret) + return ret; + super_frame_count = ((u32) temp1 << 8) + temp0; + if (super_frame_count == 0) { + deb_info("super frame count 0\n"); + return 102; + } + + /* read fft mode */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_txmod, + reg_tpsd_txmod_pos, reg_tpsd_txmod_len, + &temp); + if (ret) + return ret; + if (temp == 0) { + /* 2K */ + x = 1512; + } else if (temp == 1) { + /* 8k */ + x = 6048; + } else { + err("Invalid fft mode"); + return -EINVAL; + } + + /* read modulation mode */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_const, + reg_tpsd_const_pos, reg_tpsd_const_len, + &temp); + if (ret) + return ret; + switch (temp) { + case 0: /* QPSK */ + bits = 2; + break; + case 1: /* QAM_16 */ + bits = 4; + break; + case 2: /* QAM_64 */ + bits = 6; + break; + default: + err("invalid modulation mode"); + return -EINVAL; + } + *pre_bit_count = super_frame_count * 68 * 4 * x * bits; + deb_info("PRE err count %d frame count %d bit count %d\n", + *pre_err_count, super_frame_count, *pre_bit_count); + return 0; +} + +static int af9005_reset_pre_viterbi(struct dvb_frontend *fe) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + int ret; + + /* set super frame count to 1 */ + ret = + af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_7_0, + 1 & 0xff); + if (ret) + return ret; + ret = af9005_write_ofdm_register(state->d, xd_p_fec_super_frm_unit_15_8, + 1 >> 8); + if (ret) + return ret; + /* reset pre viterbi error count */ + ret = + af9005_write_register_bits(state->d, xd_p_fec_vtb_ber_rst, + fec_vtb_ber_rst_pos, fec_vtb_ber_rst_len, + 1); + + return ret; +} + +static int af9005_reset_post_viterbi(struct dvb_frontend *fe) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + int ret; + + /* set packet unit */ + ret = + af9005_write_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_7_0, + 10000 & 0xff); + if (ret) + return ret; + ret = + af9005_write_ofdm_register(state->d, xd_p_fec_rsd_packet_unit_15_8, + 10000 >> 8); + if (ret) + return ret; + /* reset post viterbi error count */ + ret = + af9005_write_register_bits(state->d, xd_p_fec_rsd_ber_rst, + fec_rsd_ber_rst_pos, fec_rsd_ber_rst_len, + 1); + + return ret; +} + +static int af9005_get_statistic(struct dvb_frontend *fe) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + int ret, fecavailable; + u64 numerator, denominator; + + deb_info("GET STATISTIC\n"); + ret = af9005_is_fecmon_available(fe, &fecavailable); + if (ret) + return ret; + if (!fecavailable) { + deb_info("fecmon not available\n"); + return 0; + } + + ret = af9005_get_pre_vit_err_bit_count(fe, &state->pre_vit_error_count, + &state->pre_vit_bit_count); + if (ret == 0) { + af9005_reset_pre_viterbi(fe); + if (state->pre_vit_bit_count > 0) { + /* according to v 0.0.4 of the dvb api ber should be a multiple + of 10E-9 so we have to multiply the error count by + 10E9=1000000000 */ + numerator = + (u64) state->pre_vit_error_count * (u64) 1000000000; + denominator = (u64) state->pre_vit_bit_count; + state->ber = do_div(numerator, denominator); + } else { + state->ber = 0xffffffff; + } + } + + ret = af9005_get_post_vit_ber(fe, &state->post_vit_error_count, + &state->post_vit_bit_count, + &state->abort_count); + if (ret == 0) { + ret = af9005_reset_post_viterbi(fe); + state->unc += state->abort_count; + if (ret) + return ret; + } + return 0; +} + +static int af9005_fe_refresh_state(struct dvb_frontend *fe) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + if (time_after(jiffies, state->next_status_check)) { + deb_info("REFRESH STATE\n"); + + /* statistics */ + if (af9005_get_statistic(fe)) + err("get_statistic_failed"); + state->next_status_check = jiffies + 250 * HZ / 1000; + } + return 0; +} + +static int af9005_fe_read_status(struct dvb_frontend *fe, fe_status_t * stat) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + u8 temp; + int ret; + + if (fe->ops.tuner_ops.release == NULL) + return -ENODEV; + + *stat = 0; + ret = af9005_read_register_bits(state->d, xd_p_agc_lock, + agc_lock_pos, agc_lock_len, &temp); + if (ret) + return ret; + if (temp) + *stat |= FE_HAS_SIGNAL; + + ret = af9005_read_register_bits(state->d, xd_p_fd_tpsd_lock, + fd_tpsd_lock_pos, fd_tpsd_lock_len, + &temp); + if (ret) + return ret; + if (temp) + *stat |= FE_HAS_CARRIER; + + ret = af9005_read_register_bits(state->d, + xd_r_mp2if_sync_byte_locked, + mp2if_sync_byte_locked_pos, + mp2if_sync_byte_locked_pos, &temp); + if (ret) + return ret; + if (temp) + *stat |= FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_LOCK; + if (state->opened) + af9005_led_control(state->d, *stat & FE_HAS_LOCK); + + ret = + af9005_read_register_bits(state->d, xd_p_reg_strong_sginal_detected, + reg_strong_sginal_detected_pos, + reg_strong_sginal_detected_len, &temp); + if (ret) + return ret; + if (temp != state->strong) { + deb_info("adjust for strong signal %d\n", temp); + state->strong = temp; + } + return 0; +} + +static int af9005_fe_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + if (fe->ops.tuner_ops.release == NULL) + return -ENODEV; + af9005_fe_refresh_state(fe); + *ber = state->ber; + return 0; +} + +static int af9005_fe_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + if (fe->ops.tuner_ops.release == NULL) + return -ENODEV; + af9005_fe_refresh_state(fe); + *unc = state->unc; + return 0; +} + +static int af9005_fe_read_signal_strength(struct dvb_frontend *fe, + u16 * strength) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + int ret; + u8 if_gain, rf_gain; + + if (fe->ops.tuner_ops.release == NULL) + return -ENODEV; + ret = + af9005_read_ofdm_register(state->d, xd_r_reg_aagc_rf_gain, + &rf_gain); + if (ret) + return ret; + ret = + af9005_read_ofdm_register(state->d, xd_r_reg_aagc_if_gain, + &if_gain); + if (ret) + return ret; + /* this value has no real meaning, but i don't have the tables that relate + the rf and if gain with the dbm, so I just scale the value */ + *strength = (512 - rf_gain - if_gain) << 7; + return 0; +} + +static int af9005_fe_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + /* the snr can be derived from the ber and the modulation + but I don't think this kind of complex calculations belong + in the driver. I may be wrong.... */ + return -ENOSYS; +} + +static int af9005_fe_program_cfoe(struct dvb_usb_device *d, u32 bw) +{ + u8 temp0, temp1, temp2, temp3, buf[4]; + int ret; + u32 NS_coeff1_2048Nu; + u32 NS_coeff1_8191Nu; + u32 NS_coeff1_8192Nu; + u32 NS_coeff1_8193Nu; + u32 NS_coeff2_2k; + u32 NS_coeff2_8k; + + switch (bw) { + case 6000000: + NS_coeff1_2048Nu = 0x2ADB6DC; + NS_coeff1_8191Nu = 0xAB7313; + NS_coeff1_8192Nu = 0xAB6DB7; + NS_coeff1_8193Nu = 0xAB685C; + NS_coeff2_2k = 0x156DB6E; + NS_coeff2_8k = 0x55B6DC; + break; + + case 7000000: + NS_coeff1_2048Nu = 0x3200001; + NS_coeff1_8191Nu = 0xC80640; + NS_coeff1_8192Nu = 0xC80000; + NS_coeff1_8193Nu = 0xC7F9C0; + NS_coeff2_2k = 0x1900000; + NS_coeff2_8k = 0x640000; + break; + + case 8000000: + NS_coeff1_2048Nu = 0x3924926; + NS_coeff1_8191Nu = 0xE4996E; + NS_coeff1_8192Nu = 0xE49249; + NS_coeff1_8193Nu = 0xE48B25; + NS_coeff2_2k = 0x1C92493; + NS_coeff2_8k = 0x724925; + break; + default: + err("Invalid bandwidth %d.", bw); + return -EINVAL; + } + + /* + * write NS_coeff1_2048Nu + */ + + temp0 = (u8) (NS_coeff1_2048Nu & 0x000000FF); + temp1 = (u8) ((NS_coeff1_2048Nu & 0x0000FF00) >> 8); + temp2 = (u8) ((NS_coeff1_2048Nu & 0x00FF0000) >> 16); + temp3 = (u8) ((NS_coeff1_2048Nu & 0x03000000) >> 24); + + /* big endian to make 8051 happy */ + buf[0] = temp3; + buf[1] = temp2; + buf[2] = temp1; + buf[3] = temp0; + + /* cfoe_NS_2k_coeff1_25_24 */ + ret = af9005_write_ofdm_register(d, 0xAE00, buf[0]); + if (ret) + return ret; + + /* cfoe_NS_2k_coeff1_23_16 */ + ret = af9005_write_ofdm_register(d, 0xAE01, buf[1]); + if (ret) + return ret; + + /* cfoe_NS_2k_coeff1_15_8 */ + ret = af9005_write_ofdm_register(d, 0xAE02, buf[2]); + if (ret) + return ret; + + /* cfoe_NS_2k_coeff1_7_0 */ + ret = af9005_write_ofdm_register(d, 0xAE03, buf[3]); + if (ret) + return ret; + + /* + * write NS_coeff2_2k + */ + + temp0 = (u8) ((NS_coeff2_2k & 0x0000003F)); + temp1 = (u8) ((NS_coeff2_2k & 0x00003FC0) >> 6); + temp2 = (u8) ((NS_coeff2_2k & 0x003FC000) >> 14); + temp3 = (u8) ((NS_coeff2_2k & 0x01C00000) >> 22); + + /* big endian to make 8051 happy */ + buf[0] = temp3; + buf[1] = temp2; + buf[2] = temp1; + buf[3] = temp0; + + ret = af9005_write_ofdm_register(d, 0xAE04, buf[0]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE05, buf[1]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE06, buf[2]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE07, buf[3]); + if (ret) + return ret; + + /* + * write NS_coeff1_8191Nu + */ + + temp0 = (u8) ((NS_coeff1_8191Nu & 0x000000FF)); + temp1 = (u8) ((NS_coeff1_8191Nu & 0x0000FF00) >> 8); + temp2 = (u8) ((NS_coeff1_8191Nu & 0x00FFC000) >> 16); + temp3 = (u8) ((NS_coeff1_8191Nu & 0x03000000) >> 24); + + /* big endian to make 8051 happy */ + buf[0] = temp3; + buf[1] = temp2; + buf[2] = temp1; + buf[3] = temp0; + + ret = af9005_write_ofdm_register(d, 0xAE08, buf[0]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE09, buf[1]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE0A, buf[2]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE0B, buf[3]); + if (ret) + return ret; + + /* + * write NS_coeff1_8192Nu + */ + + temp0 = (u8) (NS_coeff1_8192Nu & 0x000000FF); + temp1 = (u8) ((NS_coeff1_8192Nu & 0x0000FF00) >> 8); + temp2 = (u8) ((NS_coeff1_8192Nu & 0x00FFC000) >> 16); + temp3 = (u8) ((NS_coeff1_8192Nu & 0x03000000) >> 24); + + /* big endian to make 8051 happy */ + buf[0] = temp3; + buf[1] = temp2; + buf[2] = temp1; + buf[3] = temp0; + + ret = af9005_write_ofdm_register(d, 0xAE0C, buf[0]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE0D, buf[1]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE0E, buf[2]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE0F, buf[3]); + if (ret) + return ret; + + /* + * write NS_coeff1_8193Nu + */ + + temp0 = (u8) ((NS_coeff1_8193Nu & 0x000000FF)); + temp1 = (u8) ((NS_coeff1_8193Nu & 0x0000FF00) >> 8); + temp2 = (u8) ((NS_coeff1_8193Nu & 0x00FFC000) >> 16); + temp3 = (u8) ((NS_coeff1_8193Nu & 0x03000000) >> 24); + + /* big endian to make 8051 happy */ + buf[0] = temp3; + buf[1] = temp2; + buf[2] = temp1; + buf[3] = temp0; + + ret = af9005_write_ofdm_register(d, 0xAE10, buf[0]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE11, buf[1]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE12, buf[2]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE13, buf[3]); + if (ret) + return ret; + + /* + * write NS_coeff2_8k + */ + + temp0 = (u8) ((NS_coeff2_8k & 0x0000003F)); + temp1 = (u8) ((NS_coeff2_8k & 0x00003FC0) >> 6); + temp2 = (u8) ((NS_coeff2_8k & 0x003FC000) >> 14); + temp3 = (u8) ((NS_coeff2_8k & 0x01C00000) >> 22); + + /* big endian to make 8051 happy */ + buf[0] = temp3; + buf[1] = temp2; + buf[2] = temp1; + buf[3] = temp0; + + ret = af9005_write_ofdm_register(d, 0xAE14, buf[0]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE15, buf[1]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE16, buf[2]); + if (ret) + return ret; + + ret = af9005_write_ofdm_register(d, 0xAE17, buf[3]); + return ret; + +} + +static int af9005_fe_select_bw(struct dvb_usb_device *d, u32 bw) +{ + u8 temp; + switch (bw) { + case 6000000: + temp = 0; + break; + case 7000000: + temp = 1; + break; + case 8000000: + temp = 2; + break; + default: + err("Invalid bandwidth %d.", bw); + return -EINVAL; + } + return af9005_write_register_bits(d, xd_g_reg_bw, reg_bw_pos, + reg_bw_len, temp); +} + +static int af9005_fe_power(struct dvb_frontend *fe, int on) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + u8 temp = on; + int ret; + deb_info("power %s tuner\n", on ? "on" : "off"); + ret = af9005_send_command(state->d, 0x03, &temp, 1, NULL, 0); + return ret; +} + +static struct mt2060_config af9005_mt2060_config = { + 0xC0 +}; + +static struct qt1010_config af9005_qt1010_config = { + 0xC4 +}; + +static int af9005_fe_init(struct dvb_frontend *fe) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + struct dvb_usb_adapter *adap = fe->dvb->priv; + int ret, i, scriptlen; + u8 temp, temp0 = 0, temp1 = 0, temp2 = 0; + u8 buf[2]; + u16 if1; + + deb_info("in af9005_fe_init\n"); + + /* reset */ + deb_info("reset\n"); + if ((ret = + af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst_en, + 4, 1, 0x01))) + return ret; + if ((ret = af9005_write_ofdm_register(state->d, APO_REG_RESET, 0))) + return ret; + /* clear ofdm reset */ + deb_info("clear ofdm reset\n"); + for (i = 0; i < 150; i++) { + if ((ret = + af9005_read_ofdm_register(state->d, + xd_I2C_reg_ofdm_rst, &temp))) + return ret; + if (temp & (regmask[reg_ofdm_rst_len - 1] << reg_ofdm_rst_pos)) + break; + msleep(10); + } + if (i == 150) + return -ETIMEDOUT; + + /*FIXME in the dump + write B200 A9 + write xd_g_reg_ofsm_clk 7 + read eepr c6 (2) + read eepr c7 (2) + misc ctrl 3 -> 1 + read eepr ca (6) + write xd_g_reg_ofsm_clk 0 + write B200 a1 + */ + ret = af9005_write_ofdm_register(state->d, 0xb200, 0xa9); + if (ret) + return ret; + ret = af9005_write_ofdm_register(state->d, xd_g_reg_ofsm_clk, 0x07); + if (ret) + return ret; + temp = 0x01; + ret = af9005_send_command(state->d, 0x03, &temp, 1, NULL, 0); + if (ret) + return ret; + ret = af9005_write_ofdm_register(state->d, xd_g_reg_ofsm_clk, 0x00); + if (ret) + return ret; + ret = af9005_write_ofdm_register(state->d, 0xb200, 0xa1); + if (ret) + return ret; + + temp = regmask[reg_ofdm_rst_len - 1] << reg_ofdm_rst_pos; + if ((ret = + af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst, + reg_ofdm_rst_pos, reg_ofdm_rst_len, 1))) + return ret; + ret = af9005_write_register_bits(state->d, xd_I2C_reg_ofdm_rst, + reg_ofdm_rst_pos, reg_ofdm_rst_len, 0); + + if (ret) + return ret; + /* don't know what register aefc is, but this is what the windows driver does */ + ret = af9005_write_ofdm_register(state->d, 0xaefc, 0); + if (ret) + return ret; + + /* set stand alone chip */ + deb_info("set stand alone chip\n"); + if ((ret = + af9005_write_register_bits(state->d, xd_p_reg_dca_stand_alone, + reg_dca_stand_alone_pos, + reg_dca_stand_alone_len, 1))) + return ret; + + /* set dca upper & lower chip */ + deb_info("set dca upper & lower chip\n"); + if ((ret = + af9005_write_register_bits(state->d, xd_p_reg_dca_upper_chip, + reg_dca_upper_chip_pos, + reg_dca_upper_chip_len, 0))) + return ret; + if ((ret = + af9005_write_register_bits(state->d, xd_p_reg_dca_lower_chip, + reg_dca_lower_chip_pos, + reg_dca_lower_chip_len, 0))) + return ret; + + /* set 2wire master clock to 0x14 (for 60KHz) */ + deb_info("set 2wire master clock to 0x14 (for 60KHz)\n"); + if ((ret = + af9005_write_ofdm_register(state->d, xd_I2C_i2c_m_period, 0x14))) + return ret; + + /* clear dca enable chip */ + deb_info("clear dca enable chip\n"); + if ((ret = + af9005_write_register_bits(state->d, xd_p_reg_dca_en, + reg_dca_en_pos, reg_dca_en_len, 0))) + return ret; + /* FIXME these are register bits, but I don't know which ones */ + ret = af9005_write_ofdm_register(state->d, 0xa16c, 1); + if (ret) + return ret; + ret = af9005_write_ofdm_register(state->d, 0xa3c1, 0); + if (ret) + return ret; + + /* init other parameters: program cfoe and select bandwidth */ + deb_info("program cfoe\n"); + ret = af9005_fe_program_cfoe(state->d, 6000000); + if (ret) + return ret; + /* set read-update bit for modulation */ + deb_info("set read-update bit for modulation\n"); + if ((ret = + af9005_write_register_bits(state->d, xd_p_reg_feq_read_update, + reg_feq_read_update_pos, + reg_feq_read_update_len, 1))) + return ret; + + /* sample code has a set MPEG TS code here + but sniffing reveals that it doesn't do it */ + + /* set read-update bit to 1 for DCA modulation */ + deb_info("set read-update bit 1 for DCA modulation\n"); + if ((ret = + af9005_write_register_bits(state->d, xd_p_reg_dca_read_update, + reg_dca_read_update_pos, + reg_dca_read_update_len, 1))) + return ret; + + /* enable fec monitor */ + deb_info("enable fec monitor\n"); + if ((ret = + af9005_write_register_bits(state->d, xd_p_fec_vtb_rsd_mon_en, + fec_vtb_rsd_mon_en_pos, + fec_vtb_rsd_mon_en_len, 1))) + return ret; + + /* FIXME should be register bits, I don't know which ones */ + ret = af9005_write_ofdm_register(state->d, 0xa601, 0); + + /* set api_retrain_never_freeze */ + deb_info("set api_retrain_never_freeze\n"); + if ((ret = af9005_write_ofdm_register(state->d, 0xaefb, 0x01))) + return ret; + + /* load init script */ + deb_info("load init script\n"); + scriptlen = sizeof(script) / sizeof(RegDesc); + for (i = 0; i < scriptlen; i++) { + if ((ret = + af9005_write_register_bits(state->d, script[i].reg, + script[i].pos, + script[i].len, script[i].val))) + return ret; + /* save 3 bytes of original fcw */ + if (script[i].reg == 0xae18) + temp2 = script[i].val; + if (script[i].reg == 0xae19) + temp1 = script[i].val; + if (script[i].reg == 0xae1a) + temp0 = script[i].val; + + /* save original unplug threshold */ + if (script[i].reg == xd_p_reg_unplug_th) + state->original_if_unplug_th = script[i].val; + if (script[i].reg == xd_p_reg_unplug_rf_gain_th) + state->original_rf_unplug_th = script[i].val; + if (script[i].reg == xd_p_reg_unplug_dtop_if_gain_th) + state->original_dtop_if_unplug_th = script[i].val; + if (script[i].reg == xd_p_reg_unplug_dtop_rf_gain_th) + state->original_dtop_rf_unplug_th = script[i].val; + + } + state->original_fcw = + ((u32) temp2 << 16) + ((u32) temp1 << 8) + (u32) temp0; + + + /* save original TOPs */ + deb_info("save original TOPs\n"); + + /* RF TOP */ + ret = + af9005_read_word_agc(state->d, + xd_p_reg_aagc_rf_top_numerator_9_8, + xd_p_reg_aagc_rf_top_numerator_7_0, 0, 2, + &state->original_rf_top); + if (ret) + return ret; + + /* IF TOP */ + ret = + af9005_read_word_agc(state->d, + xd_p_reg_aagc_if_top_numerator_9_8, + xd_p_reg_aagc_if_top_numerator_7_0, 0, 2, + &state->original_if_top); + if (ret) + return ret; + + /* ACI 0 IF TOP */ + ret = + af9005_read_word_agc(state->d, 0xA60E, 0xA60A, 4, 2, + &state->original_aci0_if_top); + if (ret) + return ret; + + /* ACI 1 IF TOP */ + ret = + af9005_read_word_agc(state->d, 0xA60E, 0xA60B, 6, 2, + &state->original_aci1_if_top); + if (ret) + return ret; + + /* attach tuner and init */ + if (fe->ops.tuner_ops.release == NULL) { + /* read tuner and board id from eeprom */ + ret = af9005_read_eeprom(adap->dev, 0xc6, buf, 2); + if (ret) { + err("Impossible to read EEPROM\n"); + return ret; + } + deb_info("Tuner id %d, board id %d\n", buf[0], buf[1]); + switch (buf[0]) { + case 2: /* MT2060 */ + /* read if1 from eeprom */ + ret = af9005_read_eeprom(adap->dev, 0xc8, buf, 2); + if (ret) { + err("Impossible to read EEPROM\n"); + return ret; + } + if1 = (u16) (buf[0] << 8) + buf[1]; + if (dvb_attach(mt2060_attach, fe, &adap->dev->i2c_adap, + &af9005_mt2060_config, if1) == NULL) { + deb_info("MT2060 attach failed\n"); + return -ENODEV; + } + break; + case 3: /* QT1010 */ + case 9: /* QT1010B */ + if (dvb_attach(qt1010_attach, fe, &adap->dev->i2c_adap, + &af9005_qt1010_config) ==NULL) { + deb_info("QT1010 attach failed\n"); + return -ENODEV; + } + break; + default: + err("Unsupported tuner type %d", buf[0]); + return -ENODEV; + } + ret = fe->ops.tuner_ops.init(fe); + if (ret) + return ret; + } + + deb_info("profit!\n"); + return 0; +} + +static int af9005_fe_sleep(struct dvb_frontend *fe) +{ + return af9005_fe_power(fe, 0); +} + +static int af9005_ts_bus_ctrl(struct dvb_frontend *fe, int acquire) +{ + struct af9005_fe_state *state = fe->demodulator_priv; + + if (acquire) { + state->opened++; + } else { + + state->opened--; + if (!state->opened) + af9005_led_control(state->d, 0); + } + return 0; +} + +static int af9005_fe_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct af9005_fe_state *state = fe->demodulator_priv; + int ret; + u8 temp, temp0, temp1, temp2; + + deb_info("af9005_fe_set_frontend freq %d bw %d\n", fep->frequency, + fep->bandwidth_hz); + if (fe->ops.tuner_ops.release == NULL) { + err("Tuner not attached"); + return -ENODEV; + } + + deb_info("turn off led\n"); + /* not in the log */ + ret = af9005_led_control(state->d, 0); + if (ret) + return ret; + /* not sure about the bits */ + ret = af9005_write_register_bits(state->d, XD_MP2IF_MISC, 2, 1, 0); + if (ret) + return ret; + + /* set FCW to default value */ + deb_info("set FCW to default value\n"); + temp0 = (u8) (state->original_fcw & 0x000000ff); + temp1 = (u8) ((state->original_fcw & 0x0000ff00) >> 8); + temp2 = (u8) ((state->original_fcw & 0x00ff0000) >> 16); + ret = af9005_write_ofdm_register(state->d, 0xae1a, temp0); + if (ret) + return ret; + ret = af9005_write_ofdm_register(state->d, 0xae19, temp1); + if (ret) + return ret; + ret = af9005_write_ofdm_register(state->d, 0xae18, temp2); + if (ret) + return ret; + + /* restore original TOPs */ + deb_info("restore original TOPs\n"); + ret = + af9005_write_word_agc(state->d, + xd_p_reg_aagc_rf_top_numerator_9_8, + xd_p_reg_aagc_rf_top_numerator_7_0, 0, 2, + state->original_rf_top); + if (ret) + return ret; + ret = + af9005_write_word_agc(state->d, + xd_p_reg_aagc_if_top_numerator_9_8, + xd_p_reg_aagc_if_top_numerator_7_0, 0, 2, + state->original_if_top); + if (ret) + return ret; + ret = + af9005_write_word_agc(state->d, 0xA60E, 0xA60A, 4, 2, + state->original_aci0_if_top); + if (ret) + return ret; + ret = + af9005_write_word_agc(state->d, 0xA60E, 0xA60B, 6, 2, + state->original_aci1_if_top); + if (ret) + return ret; + + /* select bandwidth */ + deb_info("select bandwidth"); + ret = af9005_fe_select_bw(state->d, fep->bandwidth_hz); + if (ret) + return ret; + ret = af9005_fe_program_cfoe(state->d, fep->bandwidth_hz); + if (ret) + return ret; + + /* clear easy mode flag */ + deb_info("clear easy mode flag\n"); + ret = af9005_write_ofdm_register(state->d, 0xaefd, 0); + if (ret) + return ret; + + /* set unplug threshold to original value */ + deb_info("set unplug threshold to original value\n"); + ret = + af9005_write_ofdm_register(state->d, xd_p_reg_unplug_th, + state->original_if_unplug_th); + if (ret) + return ret; + /* set tuner */ + deb_info("set tuner\n"); + ret = fe->ops.tuner_ops.set_params(fe); + if (ret) + return ret; + + /* trigger ofsm */ + deb_info("trigger ofsm\n"); + temp = 0; + ret = af9005_write_tuner_registers(state->d, 0xffff, &temp, 1); + if (ret) + return ret; + + /* clear retrain and freeze flag */ + deb_info("clear retrain and freeze flag\n"); + ret = + af9005_write_register_bits(state->d, + xd_p_reg_api_retrain_request, + reg_api_retrain_request_pos, 2, 0); + if (ret) + return ret; + + /* reset pre viterbi and post viterbi registers and statistics */ + af9005_reset_pre_viterbi(fe); + af9005_reset_post_viterbi(fe); + state->pre_vit_error_count = 0; + state->pre_vit_bit_count = 0; + state->ber = 0; + state->post_vit_error_count = 0; + /* state->unc = 0; commented out since it should be ever increasing */ + state->abort_count = 0; + + state->next_status_check = jiffies; + state->strong = -1; + + return 0; +} + +static int af9005_fe_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct af9005_fe_state *state = fe->demodulator_priv; + int ret; + u8 temp; + + /* mode */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_const, + reg_tpsd_const_pos, reg_tpsd_const_len, + &temp); + if (ret) + return ret; + deb_info("===== fe_get_frontend_legacy = =============\n"); + deb_info("CONSTELLATION "); + switch (temp) { + case 0: + fep->modulation = QPSK; + deb_info("QPSK\n"); + break; + case 1: + fep->modulation = QAM_16; + deb_info("QAM_16\n"); + break; + case 2: + fep->modulation = QAM_64; + deb_info("QAM_64\n"); + break; + } + + /* tps hierarchy and alpha value */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_hier, + reg_tpsd_hier_pos, reg_tpsd_hier_len, + &temp); + if (ret) + return ret; + deb_info("HIERARCHY "); + switch (temp) { + case 0: + fep->hierarchy = HIERARCHY_NONE; + deb_info("NONE\n"); + break; + case 1: + fep->hierarchy = HIERARCHY_1; + deb_info("1\n"); + break; + case 2: + fep->hierarchy = HIERARCHY_2; + deb_info("2\n"); + break; + case 3: + fep->hierarchy = HIERARCHY_4; + deb_info("4\n"); + break; + } + + /* high/low priority */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_dec_pri, + reg_dec_pri_pos, reg_dec_pri_len, &temp); + if (ret) + return ret; + /* if temp is set = high priority */ + deb_info("PRIORITY %s\n", temp ? "high" : "low"); + + /* high coderate */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_hpcr, + reg_tpsd_hpcr_pos, reg_tpsd_hpcr_len, + &temp); + if (ret) + return ret; + deb_info("CODERATE HP "); + switch (temp) { + case 0: + fep->code_rate_HP = FEC_1_2; + deb_info("FEC_1_2\n"); + break; + case 1: + fep->code_rate_HP = FEC_2_3; + deb_info("FEC_2_3\n"); + break; + case 2: + fep->code_rate_HP = FEC_3_4; + deb_info("FEC_3_4\n"); + break; + case 3: + fep->code_rate_HP = FEC_5_6; + deb_info("FEC_5_6\n"); + break; + case 4: + fep->code_rate_HP = FEC_7_8; + deb_info("FEC_7_8\n"); + break; + } + + /* low coderate */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_lpcr, + reg_tpsd_lpcr_pos, reg_tpsd_lpcr_len, + &temp); + if (ret) + return ret; + deb_info("CODERATE LP "); + switch (temp) { + case 0: + fep->code_rate_LP = FEC_1_2; + deb_info("FEC_1_2\n"); + break; + case 1: + fep->code_rate_LP = FEC_2_3; + deb_info("FEC_2_3\n"); + break; + case 2: + fep->code_rate_LP = FEC_3_4; + deb_info("FEC_3_4\n"); + break; + case 3: + fep->code_rate_LP = FEC_5_6; + deb_info("FEC_5_6\n"); + break; + case 4: + fep->code_rate_LP = FEC_7_8; + deb_info("FEC_7_8\n"); + break; + } + + /* guard interval */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_gi, + reg_tpsd_gi_pos, reg_tpsd_gi_len, &temp); + if (ret) + return ret; + deb_info("GUARD INTERVAL "); + switch (temp) { + case 0: + fep->guard_interval = GUARD_INTERVAL_1_32; + deb_info("1_32\n"); + break; + case 1: + fep->guard_interval = GUARD_INTERVAL_1_16; + deb_info("1_16\n"); + break; + case 2: + fep->guard_interval = GUARD_INTERVAL_1_8; + deb_info("1_8\n"); + break; + case 3: + fep->guard_interval = GUARD_INTERVAL_1_4; + deb_info("1_4\n"); + break; + } + + /* fft */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_tpsd_txmod, + reg_tpsd_txmod_pos, reg_tpsd_txmod_len, + &temp); + if (ret) + return ret; + deb_info("TRANSMISSION MODE "); + switch (temp) { + case 0: + fep->transmission_mode = TRANSMISSION_MODE_2K; + deb_info("2K\n"); + break; + case 1: + fep->transmission_mode = TRANSMISSION_MODE_8K; + deb_info("8K\n"); + break; + } + + /* bandwidth */ + ret = + af9005_read_register_bits(state->d, xd_g_reg_bw, reg_bw_pos, + reg_bw_len, &temp); + deb_info("BANDWIDTH "); + switch (temp) { + case 0: + fep->bandwidth_hz = 6000000; + deb_info("6\n"); + break; + case 1: + fep->bandwidth_hz = 7000000; + deb_info("7\n"); + break; + case 2: + fep->bandwidth_hz = 8000000; + deb_info("8\n"); + break; + } + return 0; +} + +static void af9005_fe_release(struct dvb_frontend *fe) +{ + struct af9005_fe_state *state = + (struct af9005_fe_state *)fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops af9005_fe_ops; + +struct dvb_frontend *af9005_fe_attach(struct dvb_usb_device *d) +{ + struct af9005_fe_state *state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct af9005_fe_state), GFP_KERNEL); + if (state == NULL) + goto error; + + deb_info("attaching frontend af9005\n"); + + state->d = d; + state->opened = 0; + + memcpy(&state->frontend.ops, &af9005_fe_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; + error: + return NULL; +} + +static struct dvb_frontend_ops af9005_fe_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "AF9005 USB DVB-T", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 250000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = af9005_fe_release, + + .init = af9005_fe_init, + .sleep = af9005_fe_sleep, + .ts_bus_ctrl = af9005_ts_bus_ctrl, + + .set_frontend = af9005_fe_set_frontend, + .get_frontend = af9005_fe_get_frontend, + + .read_status = af9005_fe_read_status, + .read_ber = af9005_fe_read_ber, + .read_signal_strength = af9005_fe_read_signal_strength, + .read_snr = af9005_fe_read_snr, + .read_ucblocks = af9005_fe_read_unc_blocks, +}; diff --git a/drivers/media/usb/dvb-usb/af9005-remote.c b/drivers/media/usb/dvb-usb/af9005-remote.c new file mode 100644 index 000000000000..7e3961d0db6b --- /dev/null +++ b/drivers/media/usb/dvb-usb/af9005-remote.c @@ -0,0 +1,157 @@ +/* DVB USB compliant Linux driver for the Afatech 9005 + * USB1.1 DVB-T receiver. + * + * Standard remote decode function + * + * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "af9005.h" +/* debug */ +static int dvb_usb_af9005_remote_debug; +module_param_named(debug, dvb_usb_af9005_remote_debug, int, 0644); +MODULE_PARM_DESC(debug, + "enable (1) or disable (0) debug messages." + DVB_USB_DEBUG_STATUS); + +#define deb_decode(args...) dprintk(dvb_usb_af9005_remote_debug,0x01,args) + +struct rc_map_table rc_map_af9005_table[] = { + + {0x01b7, KEY_POWER}, + {0x01a7, KEY_VOLUMEUP}, + {0x0187, KEY_CHANNELUP}, + {0x017f, KEY_MUTE}, + {0x01bf, KEY_VOLUMEDOWN}, + {0x013f, KEY_CHANNELDOWN}, + {0x01df, KEY_1}, + {0x015f, KEY_2}, + {0x019f, KEY_3}, + {0x011f, KEY_4}, + {0x01ef, KEY_5}, + {0x016f, KEY_6}, + {0x01af, KEY_7}, + {0x0127, KEY_8}, + {0x0107, KEY_9}, + {0x01cf, KEY_ZOOM}, + {0x014f, KEY_0}, + {0x018f, KEY_GOTO}, /* marked jump on the remote */ + + {0x00bd, KEY_POWER}, + {0x007d, KEY_VOLUMEUP}, + {0x00fd, KEY_CHANNELUP}, + {0x009d, KEY_MUTE}, + {0x005d, KEY_VOLUMEDOWN}, + {0x00dd, KEY_CHANNELDOWN}, + {0x00ad, KEY_1}, + {0x006d, KEY_2}, + {0x00ed, KEY_3}, + {0x008d, KEY_4}, + {0x004d, KEY_5}, + {0x00cd, KEY_6}, + {0x00b5, KEY_7}, + {0x0075, KEY_8}, + {0x00f5, KEY_9}, + {0x0095, KEY_ZOOM}, + {0x0055, KEY_0}, + {0x00d5, KEY_GOTO}, /* marked jump on the remote */ +}; + +int rc_map_af9005_table_size = ARRAY_SIZE(rc_map_af9005_table); + +static int repeatable_keys[] = { + KEY_VOLUMEUP, + KEY_VOLUMEDOWN, + KEY_CHANNELUP, + KEY_CHANNELDOWN +}; + +int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event, + int *state) +{ + u16 mark, space; + u32 result; + u8 cust, dat, invdat; + int i; + + if (len >= 6) { + mark = (u16) (data[0] << 8) + data[1]; + space = (u16) (data[2] << 8) + data[3]; + if (space * 3 < mark) { + for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { + if (d->last_event == repeatable_keys[i]) { + *state = REMOTE_KEY_REPEAT; + *event = d->last_event; + deb_decode("repeat key, event %x\n", + *event); + return 0; + } + } + deb_decode("repeated key ignored (non repeatable)\n"); + return 0; + } else if (len >= 33 * 4) { /*32 bits + start code */ + result = 0; + for (i = 4; i < 4 + 32 * 4; i += 4) { + result <<= 1; + mark = (u16) (data[i] << 8) + data[i + 1]; + mark >>= 1; + space = (u16) (data[i + 2] << 8) + data[i + 3]; + space >>= 1; + if (mark * 2 > space) + result += 1; + } + deb_decode("key pressed, raw value %x\n", result); + if ((result & 0xff000000) != 0xfe000000) { + deb_decode + ("doesn't start with 0xfe, ignored\n"); + return 0; + } + cust = (result >> 16) & 0xff; + dat = (result >> 8) & 0xff; + invdat = (~result) & 0xff; + if (dat != invdat) { + deb_decode("code != inverted code\n"); + return 0; + } + for (i = 0; i < rc_map_af9005_table_size; i++) { + if (rc5_custom(&rc_map_af9005_table[i]) == cust + && rc5_data(&rc_map_af9005_table[i]) == dat) { + *event = rc_map_af9005_table[i].keycode; + *state = REMOTE_KEY_PRESSED; + deb_decode + ("key pressed, event %x\n", *event); + return 0; + } + } + deb_decode("not found in table\n"); + } + } + return 0; +} + +EXPORT_SYMBOL(rc_map_af9005_table); +EXPORT_SYMBOL(rc_map_af9005_table_size); +EXPORT_SYMBOL(af9005_rc_decode); + +MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>"); +MODULE_DESCRIPTION + ("Standard remote control decoder for Afatech 9005 DVB-T USB1.1 stick"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/af9005-script.h b/drivers/media/usb/dvb-usb/af9005-script.h new file mode 100644 index 000000000000..4d69045426dd --- /dev/null +++ b/drivers/media/usb/dvb-usb/af9005-script.h @@ -0,0 +1,203 @@ +/* +File automatically generated by createinit.py using data +extracted from AF05BDA.sys (windows driver): + +dd if=AF05BDA.sys of=initsequence bs=1 skip=88316 count=1110 +python createinit.py > af9005-script.h + +*/ + +typedef struct { + u16 reg; + u8 pos; + u8 len; + u8 val; +} RegDesc; + +static RegDesc script[] = { + {0xa180, 0x0, 0x8, 0xa}, + {0xa181, 0x0, 0x8, 0xd7}, + {0xa182, 0x0, 0x8, 0xa3}, + {0xa0a0, 0x0, 0x8, 0x0}, + {0xa0a1, 0x0, 0x5, 0x0}, + {0xa0a1, 0x5, 0x1, 0x1}, + {0xa0c0, 0x0, 0x4, 0x1}, + {0xa20e, 0x4, 0x4, 0xa}, + {0xa20f, 0x0, 0x8, 0x40}, + {0xa210, 0x0, 0x8, 0x8}, + {0xa32a, 0x0, 0x4, 0xa}, + {0xa32c, 0x0, 0x8, 0x20}, + {0xa32b, 0x0, 0x8, 0x15}, + {0xa1a0, 0x1, 0x1, 0x1}, + {0xa000, 0x0, 0x1, 0x1}, + {0xa000, 0x1, 0x1, 0x0}, + {0xa001, 0x1, 0x1, 0x1}, + {0xa001, 0x0, 0x1, 0x0}, + {0xa001, 0x5, 0x1, 0x0}, + {0xa00e, 0x0, 0x5, 0x10}, + {0xa00f, 0x0, 0x3, 0x4}, + {0xa00f, 0x3, 0x3, 0x5}, + {0xa010, 0x0, 0x3, 0x4}, + {0xa010, 0x3, 0x3, 0x5}, + {0xa016, 0x4, 0x4, 0x3}, + {0xa01f, 0x0, 0x6, 0xa}, + {0xa020, 0x0, 0x6, 0xa}, + {0xa2bc, 0x0, 0x1, 0x1}, + {0xa2bc, 0x5, 0x1, 0x1}, + {0xa015, 0x0, 0x8, 0x50}, + {0xa016, 0x0, 0x1, 0x0}, + {0xa02a, 0x0, 0x8, 0x50}, + {0xa029, 0x0, 0x8, 0x4b}, + {0xa614, 0x0, 0x8, 0x46}, + {0xa002, 0x0, 0x5, 0x19}, + {0xa003, 0x0, 0x5, 0x1a}, + {0xa004, 0x0, 0x5, 0x19}, + {0xa005, 0x0, 0x5, 0x1a}, + {0xa008, 0x0, 0x8, 0x69}, + {0xa009, 0x0, 0x2, 0x2}, + {0xae1b, 0x0, 0x8, 0x69}, + {0xae1c, 0x0, 0x8, 0x2}, + {0xae1d, 0x0, 0x8, 0x2a}, + {0xa022, 0x0, 0x8, 0xaa}, + {0xa006, 0x0, 0x8, 0xc8}, + {0xa007, 0x0, 0x2, 0x0}, + {0xa00c, 0x0, 0x8, 0xba}, + {0xa00d, 0x0, 0x2, 0x2}, + {0xa608, 0x0, 0x8, 0xba}, + {0xa60e, 0x0, 0x2, 0x2}, + {0xa609, 0x0, 0x8, 0x80}, + {0xa60e, 0x2, 0x2, 0x3}, + {0xa00a, 0x0, 0x8, 0xb6}, + {0xa00b, 0x0, 0x2, 0x0}, + {0xa011, 0x0, 0x8, 0xb9}, + {0xa012, 0x0, 0x2, 0x0}, + {0xa013, 0x0, 0x8, 0xbd}, + {0xa014, 0x0, 0x2, 0x2}, + {0xa366, 0x0, 0x1, 0x1}, + {0xa2bc, 0x3, 0x1, 0x0}, + {0xa2bd, 0x0, 0x8, 0xa}, + {0xa2be, 0x0, 0x8, 0x14}, + {0xa2bf, 0x0, 0x8, 0x8}, + {0xa60a, 0x0, 0x8, 0xbd}, + {0xa60e, 0x4, 0x2, 0x2}, + {0xa60b, 0x0, 0x8, 0x86}, + {0xa60e, 0x6, 0x2, 0x3}, + {0xa001, 0x2, 0x2, 0x1}, + {0xa1c7, 0x0, 0x8, 0xf5}, + {0xa03d, 0x0, 0x8, 0xb1}, + {0xa616, 0x0, 0x8, 0xff}, + {0xa617, 0x0, 0x8, 0xad}, + {0xa618, 0x0, 0x8, 0xad}, + {0xa61e, 0x3, 0x1, 0x1}, + {0xae1a, 0x0, 0x8, 0x0}, + {0xae19, 0x0, 0x8, 0xc8}, + {0xae18, 0x0, 0x8, 0x61}, + {0xa140, 0x0, 0x8, 0x0}, + {0xa141, 0x0, 0x8, 0xc8}, + {0xa142, 0x0, 0x7, 0x61}, + {0xa023, 0x0, 0x8, 0xff}, + {0xa021, 0x0, 0x8, 0xad}, + {0xa026, 0x0, 0x1, 0x0}, + {0xa024, 0x0, 0x8, 0xff}, + {0xa025, 0x0, 0x8, 0xff}, + {0xa1c8, 0x0, 0x8, 0xf}, + {0xa2bc, 0x1, 0x1, 0x0}, + {0xa60c, 0x0, 0x4, 0x5}, + {0xa60c, 0x4, 0x4, 0x6}, + {0xa60d, 0x0, 0x8, 0xa}, + {0xa371, 0x0, 0x1, 0x1}, + {0xa366, 0x1, 0x3, 0x7}, + {0xa338, 0x0, 0x8, 0x10}, + {0xa339, 0x0, 0x6, 0x7}, + {0xa33a, 0x0, 0x6, 0x1f}, + {0xa33b, 0x0, 0x8, 0xf6}, + {0xa33c, 0x3, 0x5, 0x4}, + {0xa33d, 0x4, 0x4, 0x0}, + {0xa33d, 0x1, 0x1, 0x1}, + {0xa33d, 0x2, 0x1, 0x1}, + {0xa33d, 0x3, 0x1, 0x1}, + {0xa16d, 0x0, 0x4, 0xf}, + {0xa161, 0x0, 0x5, 0x5}, + {0xa162, 0x0, 0x4, 0x5}, + {0xa165, 0x0, 0x8, 0xff}, + {0xa166, 0x0, 0x8, 0x9c}, + {0xa2c3, 0x0, 0x4, 0x5}, + {0xa61a, 0x0, 0x6, 0xf}, + {0xb200, 0x0, 0x8, 0xa1}, + {0xb201, 0x0, 0x8, 0x7}, + {0xa093, 0x0, 0x1, 0x0}, + {0xa093, 0x1, 0x5, 0xf}, + {0xa094, 0x0, 0x8, 0xff}, + {0xa095, 0x0, 0x8, 0xf}, + {0xa080, 0x2, 0x5, 0x3}, + {0xa081, 0x0, 0x4, 0x0}, + {0xa081, 0x4, 0x4, 0x9}, + {0xa082, 0x0, 0x5, 0x1f}, + {0xa08d, 0x0, 0x8, 0x1}, + {0xa083, 0x0, 0x8, 0x32}, + {0xa084, 0x0, 0x1, 0x0}, + {0xa08e, 0x0, 0x8, 0x3}, + {0xa085, 0x0, 0x8, 0x32}, + {0xa086, 0x0, 0x3, 0x0}, + {0xa087, 0x0, 0x8, 0x6e}, + {0xa088, 0x0, 0x5, 0x15}, + {0xa089, 0x0, 0x8, 0x0}, + {0xa08a, 0x0, 0x5, 0x19}, + {0xa08b, 0x0, 0x8, 0x92}, + {0xa08c, 0x0, 0x5, 0x1c}, + {0xa120, 0x0, 0x8, 0x0}, + {0xa121, 0x0, 0x5, 0x10}, + {0xa122, 0x0, 0x8, 0x0}, + {0xa123, 0x0, 0x7, 0x40}, + {0xa123, 0x7, 0x1, 0x0}, + {0xa124, 0x0, 0x8, 0x13}, + {0xa125, 0x0, 0x7, 0x10}, + {0xa1c0, 0x0, 0x8, 0x0}, + {0xa1c1, 0x0, 0x5, 0x4}, + {0xa1c2, 0x0, 0x8, 0x0}, + {0xa1c3, 0x0, 0x5, 0x10}, + {0xa1c3, 0x5, 0x3, 0x0}, + {0xa1c4, 0x0, 0x6, 0x0}, + {0xa1c5, 0x0, 0x7, 0x10}, + {0xa100, 0x0, 0x8, 0x0}, + {0xa101, 0x0, 0x5, 0x10}, + {0xa102, 0x0, 0x8, 0x0}, + {0xa103, 0x0, 0x7, 0x40}, + {0xa103, 0x7, 0x1, 0x0}, + {0xa104, 0x0, 0x8, 0x18}, + {0xa105, 0x0, 0x7, 0xa}, + {0xa106, 0x0, 0x8, 0x20}, + {0xa107, 0x0, 0x8, 0x40}, + {0xa108, 0x0, 0x4, 0x0}, + {0xa38c, 0x0, 0x8, 0xfc}, + {0xa38d, 0x0, 0x8, 0x0}, + {0xa38e, 0x0, 0x8, 0x7e}, + {0xa38f, 0x0, 0x8, 0x0}, + {0xa390, 0x0, 0x8, 0x2f}, + {0xa60f, 0x5, 0x1, 0x1}, + {0xa170, 0x0, 0x8, 0xdc}, + {0xa171, 0x0, 0x2, 0x0}, + {0xa2ae, 0x0, 0x1, 0x1}, + {0xa2ae, 0x1, 0x1, 0x1}, + {0xa392, 0x0, 0x1, 0x1}, + {0xa391, 0x2, 0x1, 0x0}, + {0xabc1, 0x0, 0x8, 0xff}, + {0xabc2, 0x0, 0x8, 0x0}, + {0xabc8, 0x0, 0x8, 0x8}, + {0xabca, 0x0, 0x8, 0x10}, + {0xabcb, 0x0, 0x1, 0x0}, + {0xabc3, 0x5, 0x3, 0x7}, + {0xabc0, 0x6, 0x1, 0x0}, + {0xabc0, 0x4, 0x2, 0x0}, + {0xa344, 0x4, 0x4, 0x1}, + {0xabc0, 0x7, 0x1, 0x1}, + {0xabc0, 0x2, 0x1, 0x1}, + {0xa345, 0x0, 0x8, 0x66}, + {0xa346, 0x0, 0x8, 0x66}, + {0xa347, 0x0, 0x4, 0x0}, + {0xa343, 0x0, 0x4, 0xa}, + {0xa347, 0x4, 0x4, 0x2}, + {0xa348, 0x0, 0x4, 0xc}, + {0xa348, 0x4, 0x4, 0x7}, + {0xa349, 0x0, 0x6, 0x2}, +}; diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c new file mode 100644 index 000000000000..af176b6ce738 --- /dev/null +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -0,0 +1,1117 @@ +/* DVB USB compliant Linux driver for the Afatech 9005 + * USB1.1 DVB-T receiver. + * + * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "af9005.h" + +/* debug */ +int dvb_usb_af9005_debug; +module_param_named(debug, dvb_usb_af9005_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))." + DVB_USB_DEBUG_STATUS); +/* enable obnoxious led */ +bool dvb_usb_af9005_led = 1; +module_param_named(led, dvb_usb_af9005_led, bool, 0644); +MODULE_PARM_DESC(led, "enable led (default: 1)."); + +/* eeprom dump */ +static int dvb_usb_af9005_dump_eeprom; +module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0); +MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* remote control decoder */ +static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len, + u32 *event, int *state); +static void *rc_keys; +static int *rc_keys_size; + +u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; + +struct af9005_device_state { + u8 sequence; + int led_state; +}; + +static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, + int readwrite, int type, u8 * values, int len) +{ + struct af9005_device_state *st = d->priv; + u8 obuf[16] = { 0 }; + u8 ibuf[17] = { 0 }; + u8 command; + int i; + int ret; + + if (len < 1) { + err("generic read/write, less than 1 byte. Makes no sense."); + return -EINVAL; + } + if (len > 8) { + err("generic read/write, more than 8 bytes. Not supported."); + return -EINVAL; + } + + obuf[0] = 14; /* rest of buffer length low */ + obuf[1] = 0; /* rest of buffer length high */ + + obuf[2] = AF9005_REGISTER_RW; /* register operation */ + obuf[3] = 12; /* rest of buffer length */ + + obuf[4] = st->sequence++; /* sequence number */ + + obuf[5] = (u8) (reg >> 8); /* register address */ + obuf[6] = (u8) (reg & 0xff); + + if (type == AF9005_OFDM_REG) { + command = AF9005_CMD_OFDM_REG; + } else { + command = AF9005_CMD_TUNER; + } + + if (len > 1) + command |= + AF9005_CMD_BURST | AF9005_CMD_AUTOINC | (len - 1) << 3; + command |= readwrite; + if (readwrite == AF9005_CMD_WRITE) + for (i = 0; i < len; i++) + obuf[8 + i] = values[i]; + else if (type == AF9005_TUNER_REG) + /* read command for tuner, the first byte contains the i2c address */ + obuf[8] = values[0]; + obuf[7] = command; + + ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); + if (ret) + return ret; + + /* sanity check */ + if (ibuf[2] != AF9005_REGISTER_RW_ACK) { + err("generic read/write, wrong reply code."); + return -EIO; + } + if (ibuf[3] != 0x0d) { + err("generic read/write, wrong length in reply."); + return -EIO; + } + if (ibuf[4] != obuf[4]) { + err("generic read/write, wrong sequence in reply."); + return -EIO; + } + /* + Windows driver doesn't check these fields, in fact sometimes + the register in the reply is different that what has been sent + + if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { + err("generic read/write, wrong register in reply."); + return -EIO; + } + if (ibuf[7] != command) { + err("generic read/write wrong command in reply."); + return -EIO; + } + */ + if (ibuf[16] != 0x01) { + err("generic read/write wrong status code in reply."); + return -EIO; + } + if (readwrite == AF9005_CMD_READ) + for (i = 0; i < len; i++) + values[i] = ibuf[8 + i]; + + return 0; + +} + +int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 * value) +{ + int ret; + deb_reg("read register %x ", reg); + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_READ, AF9005_OFDM_REG, + value, 1); + if (ret) + deb_reg("failed\n"); + else + deb_reg("value %x\n", *value); + return ret; +} + +int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len) +{ + int ret; + deb_reg("read %d registers %x ", len, reg); + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_READ, AF9005_OFDM_REG, + values, len); + if (ret) + deb_reg("failed\n"); + else + debug_dump(values, len, deb_reg); + return ret; +} + +int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, u8 value) +{ + int ret; + u8 temp = value; + deb_reg("write register %x value %x ", reg, value); + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_WRITE, AF9005_OFDM_REG, + &temp, 1); + if (ret) + deb_reg("failed\n"); + else + deb_reg("ok\n"); + return ret; +} + +int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len) +{ + int ret; + deb_reg("write %d registers %x values ", len, reg); + debug_dump(values, len, deb_reg); + + ret = af9005_generic_read_write(d, reg, + AF9005_CMD_WRITE, AF9005_OFDM_REG, + values, len); + if (ret) + deb_reg("failed\n"); + else + deb_reg("ok\n"); + return ret; +} + +int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, + u8 len, u8 * value) +{ + u8 temp; + int ret; + deb_reg("read bits %x %x %x", reg, pos, len); + ret = af9005_read_ofdm_register(d, reg, &temp); + if (ret) { + deb_reg(" failed\n"); + return ret; + } + *value = (temp >> pos) & regmask[len - 1]; + deb_reg(" value %x\n", *value); + return 0; + +} + +int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, u8 pos, + u8 len, u8 value) +{ + u8 temp, mask; + int ret; + deb_reg("write bits %x %x %x value %x\n", reg, pos, len, value); + if (pos == 0 && len == 8) + return af9005_write_ofdm_register(d, reg, value); + ret = af9005_read_ofdm_register(d, reg, &temp); + if (ret) + return ret; + mask = regmask[len - 1] << pos; + temp = (temp & ~mask) | ((value << pos) & mask); + return af9005_write_ofdm_register(d, reg, temp); + +} + +static int af9005_usb_read_tuner_registers(struct dvb_usb_device *d, + u16 reg, u8 * values, int len) +{ + return af9005_generic_read_write(d, reg, + AF9005_CMD_READ, AF9005_TUNER_REG, + values, len); +} + +static int af9005_usb_write_tuner_registers(struct dvb_usb_device *d, + u16 reg, u8 * values, int len) +{ + return af9005_generic_read_write(d, reg, + AF9005_CMD_WRITE, + AF9005_TUNER_REG, values, len); +} + +int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len) +{ + /* don't let the name of this function mislead you: it's just used + as an interface from the firmware to the i2c bus. The actual + i2c addresses are contained in the data */ + int ret, i, done = 0, fail = 0; + u8 temp; + ret = af9005_usb_write_tuner_registers(d, reg, values, len); + if (ret) + return ret; + if (reg != 0xffff) { + /* check if write done (0xa40d bit 1) or fail (0xa40d bit 2) */ + for (i = 0; i < 200; i++) { + ret = + af9005_read_ofdm_register(d, + xd_I2C_i2c_m_status_wdat_done, + &temp); + if (ret) + return ret; + done = temp & (regmask[i2c_m_status_wdat_done_len - 1] + << i2c_m_status_wdat_done_pos); + if (done) + break; + fail = temp & (regmask[i2c_m_status_wdat_fail_len - 1] + << i2c_m_status_wdat_fail_pos); + if (fail) + break; + msleep(50); + } + if (i == 200) + return -ETIMEDOUT; + if (fail) { + /* clear write fail bit */ + af9005_write_register_bits(d, + xd_I2C_i2c_m_status_wdat_fail, + i2c_m_status_wdat_fail_pos, + i2c_m_status_wdat_fail_len, + 1); + return -EIO; + } + /* clear write done bit */ + ret = + af9005_write_register_bits(d, + xd_I2C_i2c_m_status_wdat_fail, + i2c_m_status_wdat_done_pos, + i2c_m_status_wdat_done_len, 1); + if (ret) + return ret; + } + return 0; +} + +int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, u8 addr, + u8 * values, int len) +{ + /* don't let the name of this function mislead you: it's just used + as an interface from the firmware to the i2c bus. The actual + i2c addresses are contained in the data */ + int ret, i; + u8 temp, buf[2]; + + buf[0] = addr; /* tuner i2c address */ + buf[1] = values[0]; /* tuner register */ + + values[0] = addr + 0x01; /* i2c read address */ + + if (reg == APO_REG_I2C_RW_SILICON_TUNER) { + /* write tuner i2c address to tuner, 0c00c0 undocumented, found by sniffing */ + ret = af9005_write_tuner_registers(d, 0x00c0, buf, 2); + if (ret) + return ret; + } + + /* send read command to ofsm */ + ret = af9005_usb_read_tuner_registers(d, reg, values, 1); + if (ret) + return ret; + + /* check if read done */ + for (i = 0; i < 200; i++) { + ret = af9005_read_ofdm_register(d, 0xa408, &temp); + if (ret) + return ret; + if (temp & 0x01) + break; + msleep(50); + } + if (i == 200) + return -ETIMEDOUT; + + /* clear read done bit (by writing 1) */ + ret = af9005_write_ofdm_register(d, xd_I2C_i2c_m_data8, 1); + if (ret) + return ret; + + /* get read data (available from 0xa400) */ + for (i = 0; i < len; i++) { + ret = af9005_read_ofdm_register(d, 0xa400 + i, &temp); + if (ret) + return ret; + values[i] = temp; + } + return 0; +} + +static int af9005_i2c_write(struct dvb_usb_device *d, u8 i2caddr, u8 reg, + u8 * data, int len) +{ + int ret, i; + u8 buf[3]; + deb_i2c("i2c_write i2caddr %x, reg %x, len %d data ", i2caddr, + reg, len); + debug_dump(data, len, deb_i2c); + + for (i = 0; i < len; i++) { + buf[0] = i2caddr; + buf[1] = reg + (u8) i; + buf[2] = data[i]; + ret = + af9005_write_tuner_registers(d, + APO_REG_I2C_RW_SILICON_TUNER, + buf, 3); + if (ret) { + deb_i2c("i2c_write failed\n"); + return ret; + } + } + deb_i2c("i2c_write ok\n"); + return 0; +} + +static int af9005_i2c_read(struct dvb_usb_device *d, u8 i2caddr, u8 reg, + u8 * data, int len) +{ + int ret, i; + u8 temp; + deb_i2c("i2c_read i2caddr %x, reg %x, len %d\n ", i2caddr, reg, len); + for (i = 0; i < len; i++) { + temp = reg + i; + ret = + af9005_read_tuner_registers(d, + APO_REG_I2C_RW_SILICON_TUNER, + i2caddr, &temp, 1); + if (ret) { + deb_i2c("i2c_read failed\n"); + return ret; + } + data[i] = temp; + } + deb_i2c("i2c data read: "); + debug_dump(data, len, deb_i2c); + return 0; +} + +static int af9005_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + /* only implements what the mt2060 module does, don't know how + to make it really generic */ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret; + u8 reg, addr; + u8 *value; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + if (num == 2) { + /* reads a single register */ + reg = *msg[0].buf; + addr = msg[0].addr; + value = msg[1].buf; + ret = af9005_i2c_read(d, addr, reg, value, 1); + if (ret == 0) + ret = 2; + } else { + /* write one or more registers */ + reg = msg[0].buf[0]; + addr = msg[0].addr; + value = &msg[0].buf[1]; + ret = af9005_i2c_write(d, addr, reg, value, msg[0].len - 1); + if (ret == 0) + ret = 1; + } + + mutex_unlock(&d->i2c_mutex); + return ret; +} + +static u32 af9005_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm af9005_i2c_algo = { + .master_xfer = af9005_i2c_xfer, + .functionality = af9005_i2c_func, +}; + +int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, + int wlen, u8 * rbuf, int rlen) +{ + struct af9005_device_state *st = d->priv; + + int ret, i, packet_len; + u8 buf[64]; + u8 ibuf[64]; + + if (wlen < 0) { + err("send command, wlen less than 0 bytes. Makes no sense."); + return -EINVAL; + } + if (wlen > 54) { + err("send command, wlen more than 54 bytes. Not supported."); + return -EINVAL; + } + if (rlen > 54) { + err("send command, rlen more than 54 bytes. Not supported."); + return -EINVAL; + } + packet_len = wlen + 5; + buf[0] = (u8) (packet_len & 0xff); + buf[1] = (u8) ((packet_len & 0xff00) >> 8); + + buf[2] = 0x26; /* packet type */ + buf[3] = wlen + 3; + buf[4] = st->sequence++; + buf[5] = command; + buf[6] = wlen; + for (i = 0; i < wlen; i++) + buf[7 + i] = wbuf[i]; + ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); + if (ret) + return ret; + if (ibuf[2] != 0x27) { + err("send command, wrong reply code."); + return -EIO; + } + if (ibuf[4] != buf[4]) { + err("send command, wrong sequence in reply."); + return -EIO; + } + if (ibuf[5] != 0x01) { + err("send command, wrong status code in reply."); + return -EIO; + } + if (ibuf[6] != rlen) { + err("send command, invalid data length in reply."); + return -EIO; + } + for (i = 0; i < rlen; i++) + rbuf[i] = ibuf[i + 7]; + return 0; +} + +int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, + int len) +{ + struct af9005_device_state *st = d->priv; + u8 obuf[16], ibuf[14]; + int ret, i; + + memset(obuf, 0, sizeof(obuf)); + memset(ibuf, 0, sizeof(ibuf)); + + obuf[0] = 14; /* length of rest of packet low */ + obuf[1] = 0; /* length of rest of packer high */ + + obuf[2] = 0x2a; /* read/write eeprom */ + + obuf[3] = 12; /* size */ + + obuf[4] = st->sequence++; + + obuf[5] = 0; /* read */ + + obuf[6] = len; + obuf[7] = address; + ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); + if (ret) + return ret; + if (ibuf[2] != 0x2b) { + err("Read eeprom, invalid reply code"); + return -EIO; + } + if (ibuf[3] != 10) { + err("Read eeprom, invalid reply length"); + return -EIO; + } + if (ibuf[4] != obuf[4]) { + err("Read eeprom, wrong sequence in reply "); + return -EIO; + } + if (ibuf[5] != 1) { + err("Read eeprom, wrong status in reply "); + return -EIO; + } + for (i = 0; i < len; i++) { + values[i] = ibuf[6 + i]; + } + return 0; +} + +static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) +{ + u8 buf[FW_BULKOUT_SIZE + 2]; + u16 checksum; + int act_len, i, ret; + memset(buf, 0, sizeof(buf)); + buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); + buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); + switch (type) { + case FW_CONFIG: + buf[2] = 0x11; + buf[3] = 0x04; + buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ + buf[5] = 0x03; + checksum = buf[4] + buf[5]; + buf[6] = (u8) ((checksum >> 8) & 0xff); + buf[7] = (u8) (checksum & 0xff); + break; + case FW_CONFIRM: + buf[2] = 0x11; + buf[3] = 0x04; + buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ + buf[5] = 0x01; + checksum = buf[4] + buf[5]; + buf[6] = (u8) ((checksum >> 8) & 0xff); + buf[7] = (u8) (checksum & 0xff); + break; + case FW_BOOT: + buf[2] = 0x10; + buf[3] = 0x08; + buf[4] = 0x00; /* sequence number, original driver doesn't increment it here */ + buf[5] = 0x97; + buf[6] = 0xaa; + buf[7] = 0x55; + buf[8] = 0xa5; + buf[9] = 0x5a; + checksum = 0; + for (i = 4; i <= 9; i++) + checksum += buf[i]; + buf[10] = (u8) ((checksum >> 8) & 0xff); + buf[11] = (u8) (checksum & 0xff); + break; + default: + err("boot packet invalid boot packet type"); + return -EINVAL; + } + deb_fw(">>> "); + debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); + + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, 0x02), + buf, FW_BULKOUT_SIZE + 2, &act_len, 2000); + if (ret) + err("boot packet bulk message failed: %d (%d/%d)", ret, + FW_BULKOUT_SIZE + 2, act_len); + else + ret = act_len != FW_BULKOUT_SIZE + 2 ? -1 : 0; + if (ret) + return ret; + memset(buf, 0, 9); + ret = usb_bulk_msg(udev, + usb_rcvbulkpipe(udev, 0x01), buf, 9, &act_len, 2000); + if (ret) { + err("boot packet recv bulk message failed: %d", ret); + return ret; + } + deb_fw("<<< "); + debug_dump(buf, act_len, deb_fw); + checksum = 0; + switch (type) { + case FW_CONFIG: + if (buf[2] != 0x11) { + err("boot bad config header."); + return -EIO; + } + if (buf[3] != 0x05) { + err("boot bad config size."); + return -EIO; + } + if (buf[4] != 0x00) { + err("boot bad config sequence."); + return -EIO; + } + if (buf[5] != 0x04) { + err("boot bad config subtype."); + return -EIO; + } + for (i = 4; i <= 6; i++) + checksum += buf[i]; + if (buf[7] * 256 + buf[8] != checksum) { + err("boot bad config checksum."); + return -EIO; + } + *reply = buf[6]; + break; + case FW_CONFIRM: + if (buf[2] != 0x11) { + err("boot bad confirm header."); + return -EIO; + } + if (buf[3] != 0x05) { + err("boot bad confirm size."); + return -EIO; + } + if (buf[4] != 0x00) { + err("boot bad confirm sequence."); + return -EIO; + } + if (buf[5] != 0x02) { + err("boot bad confirm subtype."); + return -EIO; + } + for (i = 4; i <= 6; i++) + checksum += buf[i]; + if (buf[7] * 256 + buf[8] != checksum) { + err("boot bad confirm checksum."); + return -EIO; + } + *reply = buf[6]; + break; + case FW_BOOT: + if (buf[2] != 0x10) { + err("boot bad boot header."); + return -EIO; + } + if (buf[3] != 0x05) { + err("boot bad boot size."); + return -EIO; + } + if (buf[4] != 0x00) { + err("boot bad boot sequence."); + return -EIO; + } + if (buf[5] != 0x01) { + err("boot bad boot pattern 01."); + return -EIO; + } + if (buf[6] != 0x10) { + err("boot bad boot pattern 10."); + return -EIO; + } + for (i = 4; i <= 6; i++) + checksum += buf[i]; + if (buf[7] * 256 + buf[8] != checksum) { + err("boot bad boot checksum."); + return -EIO; + } + break; + + } + + return 0; +} + +static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw) +{ + int i, packets, ret, act_len; + + u8 buf[FW_BULKOUT_SIZE + 2]; + u8 reply; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + if (ret) + return ret; + if (reply != 0x01) { + err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); + return -EIO; + } + packets = fw->size / FW_BULKOUT_SIZE; + buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); + buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); + for (i = 0; i < packets; i++) { + memcpy(&buf[2], fw->data + i * FW_BULKOUT_SIZE, + FW_BULKOUT_SIZE); + deb_fw(">>> "); + debug_dump(buf, FW_BULKOUT_SIZE + 2, deb_fw); + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, 0x02), + buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); + if (ret) { + err("firmware download failed at packet %d with code %d", i, ret); + return ret; + } + } + ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); + if (ret) + return ret; + if (reply != (u8) (packets & 0xff)) { + err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); + return -EIO; + } + ret = af9005_boot_packet(udev, FW_BOOT, &reply); + if (ret) + return ret; + ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + if (ret) + return ret; + if (reply != 0x02) { + err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); + return -EIO; + } + + return 0; + +} + +int af9005_led_control(struct dvb_usb_device *d, int onoff) +{ + struct af9005_device_state *st = d->priv; + int temp, ret; + + if (onoff && dvb_usb_af9005_led) + temp = 1; + else + temp = 0; + if (st->led_state != temp) { + ret = + af9005_write_register_bits(d, xd_p_reg_top_locken1, + reg_top_locken1_pos, + reg_top_locken1_len, temp); + if (ret) + return ret; + ret = + af9005_write_register_bits(d, xd_p_reg_top_lock1, + reg_top_lock1_pos, + reg_top_lock1_len, temp); + if (ret) + return ret; + st->led_state = temp; + } + return 0; +} + +static int af9005_frontend_attach(struct dvb_usb_adapter *adap) +{ + u8 buf[8]; + int i; + + /* without these calls the first commands after downloading + the firmware fail. I put these calls here to simulate + what it is done in dvb-usb-init.c. + */ + struct usb_device *udev = adap->dev->udev; + usb_clear_halt(udev, usb_sndbulkpipe(udev, 2)); + usb_clear_halt(udev, usb_rcvbulkpipe(udev, 1)); + if (dvb_usb_af9005_dump_eeprom) { + printk("EEPROM DUMP\n"); + for (i = 0; i < 255; i += 8) { + af9005_read_eeprom(adap->dev, i, buf, 8); + printk("ADDR %x ", i); + debug_dump(buf, 8, printk); + } + } + adap->fe_adap[0].fe = af9005_fe_attach(adap->dev); + return 0; +} + +static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) +{ + struct af9005_device_state *st = d->priv; + int ret, len; + + u8 obuf[5]; + u8 ibuf[256]; + + *state = REMOTE_NO_KEY_PRESSED; + if (rc_decode == NULL) { + /* it shouldn't never come here */ + return 0; + } + /* deb_info("rc_query\n"); */ + obuf[0] = 3; /* rest of packet length low */ + obuf[1] = 0; /* rest of packet lentgh high */ + obuf[2] = 0x40; /* read remote */ + obuf[3] = 1; /* rest of packet length */ + obuf[4] = st->sequence++; /* sequence number */ + ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); + if (ret) { + err("rc query failed"); + return ret; + } + if (ibuf[2] != 0x41) { + err("rc query bad header."); + return -EIO; + } + if (ibuf[4] != obuf[4]) { + err("rc query bad sequence."); + return -EIO; + } + len = ibuf[5]; + if (len > 246) { + err("rc query invalid length"); + return -EIO; + } + if (len > 0) { + deb_rc("rc data (%d) ", len); + debug_dump((ibuf + 6), len, deb_rc); + ret = rc_decode(d, &ibuf[6], len, event, state); + if (ret) { + err("rc_decode failed"); + return ret; + } else { + deb_rc("rc_decode state %x event %x\n", *state, *event); + if (*state == REMOTE_KEY_REPEAT) + *event = d->last_event; + } + } + return 0; +} + +static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + + return 0; +} + +static int af9005_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + deb_info("pid filter control onoff %d\n", onoff); + if (onoff) { + ret = + af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); + if (ret) + return ret; + ret = + af9005_write_register_bits(adap->dev, + XD_MP2IF_DMX_CTRL, 1, 1, 1); + if (ret) + return ret; + ret = + af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 1); + } else + ret = + af9005_write_ofdm_register(adap->dev, XD_MP2IF_DMX_CTRL, 0); + if (ret) + return ret; + deb_info("pid filter control ok\n"); + return 0; +} + +static int af9005_pid_filter(struct dvb_usb_adapter *adap, int index, + u16 pid, int onoff) +{ + u8 cmd = index & 0x1f; + int ret; + deb_info("set pid filter, index %d, pid %x, onoff %d\n", index, + pid, onoff); + if (onoff) { + /* cannot use it as pid_filter_ctrl since it has to be done + before setting the first pid */ + if (adap->feedcount == 1) { + deb_info("first pid set, enable pid table\n"); + ret = af9005_pid_filter_control(adap, onoff); + if (ret) + return ret; + } + ret = + af9005_write_ofdm_register(adap->dev, + XD_MP2IF_PID_DATA_L, + (u8) (pid & 0xff)); + if (ret) + return ret; + ret = + af9005_write_ofdm_register(adap->dev, + XD_MP2IF_PID_DATA_H, + (u8) (pid >> 8)); + if (ret) + return ret; + cmd |= 0x20 | 0x40; + } else { + if (adap->feedcount == 0) { + deb_info("last pid unset, disable pid table\n"); + ret = af9005_pid_filter_control(adap, onoff); + if (ret) + return ret; + } + } + ret = af9005_write_ofdm_register(adap->dev, XD_MP2IF_PID_IDX, cmd); + if (ret) + return ret; + deb_info("set pid ok\n"); + return 0; +} + +static int af9005_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int ret; + u8 reply; + ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + if (ret) + return ret; + deb_info("result of FW_CONFIG in identify state %d\n", reply); + if (reply == 0x01) + *cold = 1; + else if (reply == 0x02) + *cold = 0; + else + return -EIO; + deb_info("Identify state cold = %d\n", *cold); + return 0; +} + +static struct dvb_usb_device_properties af9005_properties; + +static int af9005_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); +} + +enum af9005_usb_table_entry { + AFATECH_AF9005, + TERRATEC_AF9005, + ANSONIC_AF9005, +}; + +static struct usb_device_id af9005_usb_table[] = { + [AFATECH_AF9005] = {USB_DEVICE(USB_VID_AFATECH, + USB_PID_AFATECH_AF9005)}, + [TERRATEC_AF9005] = {USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_T_USB_XE)}, + [ANSONIC_AF9005] = {USB_DEVICE(USB_VID_ANSONIC, + USB_PID_ANSONIC_DVBT_USB)}, + { } +}; + +MODULE_DEVICE_TABLE(usb, af9005_usb_table); + +static struct dvb_usb_device_properties af9005_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "af9005.fw", + .download_firmware = af9005_download_firmware, + .no_reconnect = 1, + + .size_of_priv = sizeof(struct af9005_device_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = + DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = af9005_pid_filter, + /* .pid_filter_ctrl = af9005_pid_filter_control, */ + .frontend_attach = af9005_frontend_attach, + /* .tuner_attach = af9005_tuner_attach, */ + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x04, + .u = { + .bulk = { + .buffersize = 4096, /* actual size seen is 3948 */ + } + } + }, + }}, + } + }, + .power_ctrl = af9005_power_ctrl, + .identify_state = af9005_identify_state, + + .i2c_algo = &af9005_i2c_algo, + + .rc.legacy = { + .rc_interval = 200, + .rc_map_table = NULL, + .rc_map_size = 0, + .rc_query = af9005_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 2, + .generic_bulk_ctrl_endpoint_response = 1, + + .num_device_descs = 3, + .devices = { + {.name = "Afatech DVB-T USB1.1 stick", + .cold_ids = {&af9005_usb_table[AFATECH_AF9005], NULL}, + .warm_ids = {NULL}, + }, + {.name = "TerraTec Cinergy T USB XE", + .cold_ids = {&af9005_usb_table[TERRATEC_AF9005], NULL}, + .warm_ids = {NULL}, + }, + {.name = "Ansonic DVB-T USB1.1 stick", + .cold_ids = {&af9005_usb_table[ANSONIC_AF9005], NULL}, + .warm_ids = {NULL}, + }, + {NULL}, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver af9005_usb_driver = { + .name = "dvb_usb_af9005", + .probe = af9005_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = af9005_usb_table, +}; + +/* module stuff */ +static int __init af9005_usb_module_init(void) +{ + int result; + if ((result = usb_register(&af9005_usb_driver))) { + err("usb_register failed. (%d)", result); + return result; + } + rc_decode = symbol_request(af9005_rc_decode); + rc_keys = symbol_request(rc_map_af9005_table); + rc_keys_size = symbol_request(rc_map_af9005_table_size); + if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) { + err("af9005_rc_decode function not found, disabling remote"); + af9005_properties.rc.legacy.rc_query = NULL; + } else { + af9005_properties.rc.legacy.rc_map_table = rc_keys; + af9005_properties.rc.legacy.rc_map_size = *rc_keys_size; + } + + return 0; +} + +static void __exit af9005_usb_module_exit(void) +{ + /* release rc decode symbols */ + if (rc_decode != NULL) + symbol_put(af9005_rc_decode); + if (rc_keys != NULL) + symbol_put(rc_map_af9005_table); + if (rc_keys_size != NULL) + symbol_put(rc_map_af9005_table_size); + /* deregister this driver from the USB subsystem */ + usb_deregister(&af9005_usb_driver); +} + +module_init(af9005_usb_module_init); +module_exit(af9005_usb_module_exit); + +MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>"); +MODULE_DESCRIPTION("Driver for Afatech 9005 DVB-T USB1.1 stick"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/af9005.h b/drivers/media/usb/dvb-usb/af9005.h new file mode 100644 index 000000000000..6a2bf3de8456 --- /dev/null +++ b/drivers/media/usb/dvb-usb/af9005.h @@ -0,0 +1,3496 @@ +/* Common header-file of the Linux driver for the Afatech 9005 + * USB1.1 DVB-T receiver. + * + * Copyright (C) 2007 Luca Olivetti (luca@ventoso.org) + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_AF9005_H_ +#define _DVB_USB_AF9005_H_ + +#define DVB_USB_LOG_PREFIX "af9005" +#include "dvb-usb.h" + +extern int dvb_usb_af9005_debug; +#define deb_info(args...) dprintk(dvb_usb_af9005_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_af9005_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_af9005_debug,0x04,args) +#define deb_reg(args...) dprintk(dvb_usb_af9005_debug,0x08,args) +#define deb_i2c(args...) dprintk(dvb_usb_af9005_debug,0x10,args) +#define deb_fw(args...) dprintk(dvb_usb_af9005_debug,0x20,args) + +extern bool dvb_usb_af9005_led; + +/* firmware */ +#define FW_BULKOUT_SIZE 250 +enum { + FW_CONFIG, + FW_CONFIRM, + FW_BOOT +}; + +/* af9005 commands */ +#define AF9005_OFDM_REG 0 +#define AF9005_TUNER_REG 1 + +#define AF9005_REGISTER_RW 0x20 +#define AF9005_REGISTER_RW_ACK 0x21 + +#define AF9005_CMD_OFDM_REG 0x00 +#define AF9005_CMD_TUNER 0x80 +#define AF9005_CMD_BURST 0x02 +#define AF9005_CMD_AUTOINC 0x04 +#define AF9005_CMD_READ 0x00 +#define AF9005_CMD_WRITE 0x01 + +/* af9005 registers */ +#define APO_REG_RESET 0xAEFF + +#define APO_REG_I2C_RW_CAN_TUNER 0xF000 +#define APO_REG_I2C_RW_SILICON_TUNER 0xF001 +#define APO_REG_GPIO_RW_SILICON_TUNER 0xFFFE /* also for OFSM */ +#define APO_REG_TRIGGER_OFSM 0xFFFF /* also for OFSM */ + +/*********************************************************************** + * Apollo Registers from VLSI * + ***********************************************************************/ +#define xd_p_reg_aagc_inverted_agc 0xA000 +#define reg_aagc_inverted_agc_pos 0 +#define reg_aagc_inverted_agc_len 1 +#define reg_aagc_inverted_agc_lsb 0 +#define xd_p_reg_aagc_sign_only 0xA000 +#define reg_aagc_sign_only_pos 1 +#define reg_aagc_sign_only_len 1 +#define reg_aagc_sign_only_lsb 0 +#define xd_p_reg_aagc_slow_adc_en 0xA000 +#define reg_aagc_slow_adc_en_pos 2 +#define reg_aagc_slow_adc_en_len 1 +#define reg_aagc_slow_adc_en_lsb 0 +#define xd_p_reg_aagc_slow_adc_scale 0xA000 +#define reg_aagc_slow_adc_scale_pos 3 +#define reg_aagc_slow_adc_scale_len 5 +#define reg_aagc_slow_adc_scale_lsb 0 +#define xd_p_reg_aagc_check_slow_adc_lock 0xA001 +#define reg_aagc_check_slow_adc_lock_pos 0 +#define reg_aagc_check_slow_adc_lock_len 1 +#define reg_aagc_check_slow_adc_lock_lsb 0 +#define xd_p_reg_aagc_init_control 0xA001 +#define reg_aagc_init_control_pos 1 +#define reg_aagc_init_control_len 1 +#define reg_aagc_init_control_lsb 0 +#define xd_p_reg_aagc_total_gain_sel 0xA001 +#define reg_aagc_total_gain_sel_pos 2 +#define reg_aagc_total_gain_sel_len 2 +#define reg_aagc_total_gain_sel_lsb 0 +#define xd_p_reg_aagc_out_inv 0xA001 +#define reg_aagc_out_inv_pos 5 +#define reg_aagc_out_inv_len 1 +#define reg_aagc_out_inv_lsb 0 +#define xd_p_reg_aagc_int_en 0xA001 +#define reg_aagc_int_en_pos 6 +#define reg_aagc_int_en_len 1 +#define reg_aagc_int_en_lsb 0 +#define xd_p_reg_aagc_lock_change_flag 0xA001 +#define reg_aagc_lock_change_flag_pos 7 +#define reg_aagc_lock_change_flag_len 1 +#define reg_aagc_lock_change_flag_lsb 0 +#define xd_p_reg_aagc_rf_loop_bw_scale_acquire 0xA002 +#define reg_aagc_rf_loop_bw_scale_acquire_pos 0 +#define reg_aagc_rf_loop_bw_scale_acquire_len 5 +#define reg_aagc_rf_loop_bw_scale_acquire_lsb 0 +#define xd_p_reg_aagc_rf_loop_bw_scale_track 0xA003 +#define reg_aagc_rf_loop_bw_scale_track_pos 0 +#define reg_aagc_rf_loop_bw_scale_track_len 5 +#define reg_aagc_rf_loop_bw_scale_track_lsb 0 +#define xd_p_reg_aagc_if_loop_bw_scale_acquire 0xA004 +#define reg_aagc_if_loop_bw_scale_acquire_pos 0 +#define reg_aagc_if_loop_bw_scale_acquire_len 5 +#define reg_aagc_if_loop_bw_scale_acquire_lsb 0 +#define xd_p_reg_aagc_if_loop_bw_scale_track 0xA005 +#define reg_aagc_if_loop_bw_scale_track_pos 0 +#define reg_aagc_if_loop_bw_scale_track_len 5 +#define reg_aagc_if_loop_bw_scale_track_lsb 0 +#define xd_p_reg_aagc_max_rf_agc_7_0 0xA006 +#define reg_aagc_max_rf_agc_7_0_pos 0 +#define reg_aagc_max_rf_agc_7_0_len 8 +#define reg_aagc_max_rf_agc_7_0_lsb 0 +#define xd_p_reg_aagc_max_rf_agc_9_8 0xA007 +#define reg_aagc_max_rf_agc_9_8_pos 0 +#define reg_aagc_max_rf_agc_9_8_len 2 +#define reg_aagc_max_rf_agc_9_8_lsb 8 +#define xd_p_reg_aagc_min_rf_agc_7_0 0xA008 +#define reg_aagc_min_rf_agc_7_0_pos 0 +#define reg_aagc_min_rf_agc_7_0_len 8 +#define reg_aagc_min_rf_agc_7_0_lsb 0 +#define xd_p_reg_aagc_min_rf_agc_9_8 0xA009 +#define reg_aagc_min_rf_agc_9_8_pos 0 +#define reg_aagc_min_rf_agc_9_8_len 2 +#define reg_aagc_min_rf_agc_9_8_lsb 8 +#define xd_p_reg_aagc_max_if_agc_7_0 0xA00A +#define reg_aagc_max_if_agc_7_0_pos 0 +#define reg_aagc_max_if_agc_7_0_len 8 +#define reg_aagc_max_if_agc_7_0_lsb 0 +#define xd_p_reg_aagc_max_if_agc_9_8 0xA00B +#define reg_aagc_max_if_agc_9_8_pos 0 +#define reg_aagc_max_if_agc_9_8_len 2 +#define reg_aagc_max_if_agc_9_8_lsb 8 +#define xd_p_reg_aagc_min_if_agc_7_0 0xA00C +#define reg_aagc_min_if_agc_7_0_pos 0 +#define reg_aagc_min_if_agc_7_0_len 8 +#define reg_aagc_min_if_agc_7_0_lsb 0 +#define xd_p_reg_aagc_min_if_agc_9_8 0xA00D +#define reg_aagc_min_if_agc_9_8_pos 0 +#define reg_aagc_min_if_agc_9_8_len 2 +#define reg_aagc_min_if_agc_9_8_lsb 8 +#define xd_p_reg_aagc_lock_sample_scale 0xA00E +#define reg_aagc_lock_sample_scale_pos 0 +#define reg_aagc_lock_sample_scale_len 5 +#define reg_aagc_lock_sample_scale_lsb 0 +#define xd_p_reg_aagc_rf_agc_lock_scale_acquire 0xA00F +#define reg_aagc_rf_agc_lock_scale_acquire_pos 0 +#define reg_aagc_rf_agc_lock_scale_acquire_len 3 +#define reg_aagc_rf_agc_lock_scale_acquire_lsb 0 +#define xd_p_reg_aagc_rf_agc_lock_scale_track 0xA00F +#define reg_aagc_rf_agc_lock_scale_track_pos 3 +#define reg_aagc_rf_agc_lock_scale_track_len 3 +#define reg_aagc_rf_agc_lock_scale_track_lsb 0 +#define xd_p_reg_aagc_if_agc_lock_scale_acquire 0xA010 +#define reg_aagc_if_agc_lock_scale_acquire_pos 0 +#define reg_aagc_if_agc_lock_scale_acquire_len 3 +#define reg_aagc_if_agc_lock_scale_acquire_lsb 0 +#define xd_p_reg_aagc_if_agc_lock_scale_track 0xA010 +#define reg_aagc_if_agc_lock_scale_track_pos 3 +#define reg_aagc_if_agc_lock_scale_track_len 3 +#define reg_aagc_if_agc_lock_scale_track_lsb 0 +#define xd_p_reg_aagc_rf_top_numerator_7_0 0xA011 +#define reg_aagc_rf_top_numerator_7_0_pos 0 +#define reg_aagc_rf_top_numerator_7_0_len 8 +#define reg_aagc_rf_top_numerator_7_0_lsb 0 +#define xd_p_reg_aagc_rf_top_numerator_9_8 0xA012 +#define reg_aagc_rf_top_numerator_9_8_pos 0 +#define reg_aagc_rf_top_numerator_9_8_len 2 +#define reg_aagc_rf_top_numerator_9_8_lsb 8 +#define xd_p_reg_aagc_if_top_numerator_7_0 0xA013 +#define reg_aagc_if_top_numerator_7_0_pos 0 +#define reg_aagc_if_top_numerator_7_0_len 8 +#define reg_aagc_if_top_numerator_7_0_lsb 0 +#define xd_p_reg_aagc_if_top_numerator_9_8 0xA014 +#define reg_aagc_if_top_numerator_9_8_pos 0 +#define reg_aagc_if_top_numerator_9_8_len 2 +#define reg_aagc_if_top_numerator_9_8_lsb 8 +#define xd_p_reg_aagc_adc_out_desired_7_0 0xA015 +#define reg_aagc_adc_out_desired_7_0_pos 0 +#define reg_aagc_adc_out_desired_7_0_len 8 +#define reg_aagc_adc_out_desired_7_0_lsb 0 +#define xd_p_reg_aagc_adc_out_desired_8 0xA016 +#define reg_aagc_adc_out_desired_8_pos 0 +#define reg_aagc_adc_out_desired_8_len 1 +#define reg_aagc_adc_out_desired_8_lsb 0 +#define xd_p_reg_aagc_fixed_gain 0xA016 +#define reg_aagc_fixed_gain_pos 3 +#define reg_aagc_fixed_gain_len 1 +#define reg_aagc_fixed_gain_lsb 0 +#define xd_p_reg_aagc_lock_count_th 0xA016 +#define reg_aagc_lock_count_th_pos 4 +#define reg_aagc_lock_count_th_len 4 +#define reg_aagc_lock_count_th_lsb 0 +#define xd_p_reg_aagc_fixed_rf_agc_control_7_0 0xA017 +#define reg_aagc_fixed_rf_agc_control_7_0_pos 0 +#define reg_aagc_fixed_rf_agc_control_7_0_len 8 +#define reg_aagc_fixed_rf_agc_control_7_0_lsb 0 +#define xd_p_reg_aagc_fixed_rf_agc_control_15_8 0xA018 +#define reg_aagc_fixed_rf_agc_control_15_8_pos 0 +#define reg_aagc_fixed_rf_agc_control_15_8_len 8 +#define reg_aagc_fixed_rf_agc_control_15_8_lsb 8 +#define xd_p_reg_aagc_fixed_rf_agc_control_23_16 0xA019 +#define reg_aagc_fixed_rf_agc_control_23_16_pos 0 +#define reg_aagc_fixed_rf_agc_control_23_16_len 8 +#define reg_aagc_fixed_rf_agc_control_23_16_lsb 16 +#define xd_p_reg_aagc_fixed_rf_agc_control_30_24 0xA01A +#define reg_aagc_fixed_rf_agc_control_30_24_pos 0 +#define reg_aagc_fixed_rf_agc_control_30_24_len 7 +#define reg_aagc_fixed_rf_agc_control_30_24_lsb 24 +#define xd_p_reg_aagc_fixed_if_agc_control_7_0 0xA01B +#define reg_aagc_fixed_if_agc_control_7_0_pos 0 +#define reg_aagc_fixed_if_agc_control_7_0_len 8 +#define reg_aagc_fixed_if_agc_control_7_0_lsb 0 +#define xd_p_reg_aagc_fixed_if_agc_control_15_8 0xA01C +#define reg_aagc_fixed_if_agc_control_15_8_pos 0 +#define reg_aagc_fixed_if_agc_control_15_8_len 8 +#define reg_aagc_fixed_if_agc_control_15_8_lsb 8 +#define xd_p_reg_aagc_fixed_if_agc_control_23_16 0xA01D +#define reg_aagc_fixed_if_agc_control_23_16_pos 0 +#define reg_aagc_fixed_if_agc_control_23_16_len 8 +#define reg_aagc_fixed_if_agc_control_23_16_lsb 16 +#define xd_p_reg_aagc_fixed_if_agc_control_30_24 0xA01E +#define reg_aagc_fixed_if_agc_control_30_24_pos 0 +#define reg_aagc_fixed_if_agc_control_30_24_len 7 +#define reg_aagc_fixed_if_agc_control_30_24_lsb 24 +#define xd_p_reg_aagc_rf_agc_unlock_numerator 0xA01F +#define reg_aagc_rf_agc_unlock_numerator_pos 0 +#define reg_aagc_rf_agc_unlock_numerator_len 6 +#define reg_aagc_rf_agc_unlock_numerator_lsb 0 +#define xd_p_reg_aagc_if_agc_unlock_numerator 0xA020 +#define reg_aagc_if_agc_unlock_numerator_pos 0 +#define reg_aagc_if_agc_unlock_numerator_len 6 +#define reg_aagc_if_agc_unlock_numerator_lsb 0 +#define xd_p_reg_unplug_th 0xA021 +#define reg_unplug_th_pos 0 +#define reg_unplug_th_len 8 +#define reg_aagc_rf_x0_lsb 0 +#define xd_p_reg_weak_signal_rfagc_thr 0xA022 +#define reg_weak_signal_rfagc_thr_pos 0 +#define reg_weak_signal_rfagc_thr_len 8 +#define reg_weak_signal_rfagc_thr_lsb 0 +#define xd_p_reg_unplug_rf_gain_th 0xA023 +#define reg_unplug_rf_gain_th_pos 0 +#define reg_unplug_rf_gain_th_len 8 +#define reg_unplug_rf_gain_th_lsb 0 +#define xd_p_reg_unplug_dtop_rf_gain_th 0xA024 +#define reg_unplug_dtop_rf_gain_th_pos 0 +#define reg_unplug_dtop_rf_gain_th_len 8 +#define reg_unplug_dtop_rf_gain_th_lsb 0 +#define xd_p_reg_unplug_dtop_if_gain_th 0xA025 +#define reg_unplug_dtop_if_gain_th_pos 0 +#define reg_unplug_dtop_if_gain_th_len 8 +#define reg_unplug_dtop_if_gain_th_lsb 0 +#define xd_p_reg_top_recover_at_unplug_en 0xA026 +#define reg_top_recover_at_unplug_en_pos 0 +#define reg_top_recover_at_unplug_en_len 1 +#define reg_top_recover_at_unplug_en_lsb 0 +#define xd_p_reg_aagc_rf_x6 0xA027 +#define reg_aagc_rf_x6_pos 0 +#define reg_aagc_rf_x6_len 8 +#define reg_aagc_rf_x6_lsb 0 +#define xd_p_reg_aagc_rf_x7 0xA028 +#define reg_aagc_rf_x7_pos 0 +#define reg_aagc_rf_x7_len 8 +#define reg_aagc_rf_x7_lsb 0 +#define xd_p_reg_aagc_rf_x8 0xA029 +#define reg_aagc_rf_x8_pos 0 +#define reg_aagc_rf_x8_len 8 +#define reg_aagc_rf_x8_lsb 0 +#define xd_p_reg_aagc_rf_x9 0xA02A +#define reg_aagc_rf_x9_pos 0 +#define reg_aagc_rf_x9_len 8 +#define reg_aagc_rf_x9_lsb 0 +#define xd_p_reg_aagc_rf_x10 0xA02B +#define reg_aagc_rf_x10_pos 0 +#define reg_aagc_rf_x10_len 8 +#define reg_aagc_rf_x10_lsb 0 +#define xd_p_reg_aagc_rf_x11 0xA02C +#define reg_aagc_rf_x11_pos 0 +#define reg_aagc_rf_x11_len 8 +#define reg_aagc_rf_x11_lsb 0 +#define xd_p_reg_aagc_rf_x12 0xA02D +#define reg_aagc_rf_x12_pos 0 +#define reg_aagc_rf_x12_len 8 +#define reg_aagc_rf_x12_lsb 0 +#define xd_p_reg_aagc_rf_x13 0xA02E +#define reg_aagc_rf_x13_pos 0 +#define reg_aagc_rf_x13_len 8 +#define reg_aagc_rf_x13_lsb 0 +#define xd_p_reg_aagc_if_x0 0xA02F +#define reg_aagc_if_x0_pos 0 +#define reg_aagc_if_x0_len 8 +#define reg_aagc_if_x0_lsb 0 +#define xd_p_reg_aagc_if_x1 0xA030 +#define reg_aagc_if_x1_pos 0 +#define reg_aagc_if_x1_len 8 +#define reg_aagc_if_x1_lsb 0 +#define xd_p_reg_aagc_if_x2 0xA031 +#define reg_aagc_if_x2_pos 0 +#define reg_aagc_if_x2_len 8 +#define reg_aagc_if_x2_lsb 0 +#define xd_p_reg_aagc_if_x3 0xA032 +#define reg_aagc_if_x3_pos 0 +#define reg_aagc_if_x3_len 8 +#define reg_aagc_if_x3_lsb 0 +#define xd_p_reg_aagc_if_x4 0xA033 +#define reg_aagc_if_x4_pos 0 +#define reg_aagc_if_x4_len 8 +#define reg_aagc_if_x4_lsb 0 +#define xd_p_reg_aagc_if_x5 0xA034 +#define reg_aagc_if_x5_pos 0 +#define reg_aagc_if_x5_len 8 +#define reg_aagc_if_x5_lsb 0 +#define xd_p_reg_aagc_if_x6 0xA035 +#define reg_aagc_if_x6_pos 0 +#define reg_aagc_if_x6_len 8 +#define reg_aagc_if_x6_lsb 0 +#define xd_p_reg_aagc_if_x7 0xA036 +#define reg_aagc_if_x7_pos 0 +#define reg_aagc_if_x7_len 8 +#define reg_aagc_if_x7_lsb 0 +#define xd_p_reg_aagc_if_x8 0xA037 +#define reg_aagc_if_x8_pos 0 +#define reg_aagc_if_x8_len 8 +#define reg_aagc_if_x8_lsb 0 +#define xd_p_reg_aagc_if_x9 0xA038 +#define reg_aagc_if_x9_pos 0 +#define reg_aagc_if_x9_len 8 +#define reg_aagc_if_x9_lsb 0 +#define xd_p_reg_aagc_if_x10 0xA039 +#define reg_aagc_if_x10_pos 0 +#define reg_aagc_if_x10_len 8 +#define reg_aagc_if_x10_lsb 0 +#define xd_p_reg_aagc_if_x11 0xA03A +#define reg_aagc_if_x11_pos 0 +#define reg_aagc_if_x11_len 8 +#define reg_aagc_if_x11_lsb 0 +#define xd_p_reg_aagc_if_x12 0xA03B +#define reg_aagc_if_x12_pos 0 +#define reg_aagc_if_x12_len 8 +#define reg_aagc_if_x12_lsb 0 +#define xd_p_reg_aagc_if_x13 0xA03C +#define reg_aagc_if_x13_pos 0 +#define reg_aagc_if_x13_len 8 +#define reg_aagc_if_x13_lsb 0 +#define xd_p_reg_aagc_min_rf_ctl_8bit_for_dca 0xA03D +#define reg_aagc_min_rf_ctl_8bit_for_dca_pos 0 +#define reg_aagc_min_rf_ctl_8bit_for_dca_len 8 +#define reg_aagc_min_rf_ctl_8bit_for_dca_lsb 0 +#define xd_p_reg_aagc_min_if_ctl_8bit_for_dca 0xA03E +#define reg_aagc_min_if_ctl_8bit_for_dca_pos 0 +#define reg_aagc_min_if_ctl_8bit_for_dca_len 8 +#define reg_aagc_min_if_ctl_8bit_for_dca_lsb 0 +#define xd_r_reg_aagc_total_gain_7_0 0xA070 +#define reg_aagc_total_gain_7_0_pos 0 +#define reg_aagc_total_gain_7_0_len 8 +#define reg_aagc_total_gain_7_0_lsb 0 +#define xd_r_reg_aagc_total_gain_15_8 0xA071 +#define reg_aagc_total_gain_15_8_pos 0 +#define reg_aagc_total_gain_15_8_len 8 +#define reg_aagc_total_gain_15_8_lsb 8 +#define xd_p_reg_aagc_in_sat_cnt_7_0 0xA074 +#define reg_aagc_in_sat_cnt_7_0_pos 0 +#define reg_aagc_in_sat_cnt_7_0_len 8 +#define reg_aagc_in_sat_cnt_7_0_lsb 0 +#define xd_p_reg_aagc_in_sat_cnt_15_8 0xA075 +#define reg_aagc_in_sat_cnt_15_8_pos 0 +#define reg_aagc_in_sat_cnt_15_8_len 8 +#define reg_aagc_in_sat_cnt_15_8_lsb 8 +#define xd_p_reg_aagc_in_sat_cnt_23_16 0xA076 +#define reg_aagc_in_sat_cnt_23_16_pos 0 +#define reg_aagc_in_sat_cnt_23_16_len 8 +#define reg_aagc_in_sat_cnt_23_16_lsb 16 +#define xd_p_reg_aagc_in_sat_cnt_31_24 0xA077 +#define reg_aagc_in_sat_cnt_31_24_pos 0 +#define reg_aagc_in_sat_cnt_31_24_len 8 +#define reg_aagc_in_sat_cnt_31_24_lsb 24 +#define xd_r_reg_aagc_digital_rf_volt_7_0 0xA078 +#define reg_aagc_digital_rf_volt_7_0_pos 0 +#define reg_aagc_digital_rf_volt_7_0_len 8 +#define reg_aagc_digital_rf_volt_7_0_lsb 0 +#define xd_r_reg_aagc_digital_rf_volt_9_8 0xA079 +#define reg_aagc_digital_rf_volt_9_8_pos 0 +#define reg_aagc_digital_rf_volt_9_8_len 2 +#define reg_aagc_digital_rf_volt_9_8_lsb 8 +#define xd_r_reg_aagc_digital_if_volt_7_0 0xA07A +#define reg_aagc_digital_if_volt_7_0_pos 0 +#define reg_aagc_digital_if_volt_7_0_len 8 +#define reg_aagc_digital_if_volt_7_0_lsb 0 +#define xd_r_reg_aagc_digital_if_volt_9_8 0xA07B +#define reg_aagc_digital_if_volt_9_8_pos 0 +#define reg_aagc_digital_if_volt_9_8_len 2 +#define reg_aagc_digital_if_volt_9_8_lsb 8 +#define xd_r_reg_aagc_rf_gain 0xA07C +#define reg_aagc_rf_gain_pos 0 +#define reg_aagc_rf_gain_len 8 +#define reg_aagc_rf_gain_lsb 0 +#define xd_r_reg_aagc_if_gain 0xA07D +#define reg_aagc_if_gain_pos 0 +#define reg_aagc_if_gain_len 8 +#define reg_aagc_if_gain_lsb 0 +#define xd_p_tinr_imp_indicator 0xA080 +#define tinr_imp_indicator_pos 0 +#define tinr_imp_indicator_len 2 +#define tinr_imp_indicator_lsb 0 +#define xd_p_reg_tinr_fifo_size 0xA080 +#define reg_tinr_fifo_size_pos 2 +#define reg_tinr_fifo_size_len 5 +#define reg_tinr_fifo_size_lsb 0 +#define xd_p_reg_tinr_saturation_cnt_th 0xA081 +#define reg_tinr_saturation_cnt_th_pos 0 +#define reg_tinr_saturation_cnt_th_len 4 +#define reg_tinr_saturation_cnt_th_lsb 0 +#define xd_p_reg_tinr_saturation_th_3_0 0xA081 +#define reg_tinr_saturation_th_3_0_pos 4 +#define reg_tinr_saturation_th_3_0_len 4 +#define reg_tinr_saturation_th_3_0_lsb 0 +#define xd_p_reg_tinr_saturation_th_8_4 0xA082 +#define reg_tinr_saturation_th_8_4_pos 0 +#define reg_tinr_saturation_th_8_4_len 5 +#define reg_tinr_saturation_th_8_4_lsb 4 +#define xd_p_reg_tinr_imp_duration_th_2k_7_0 0xA083 +#define reg_tinr_imp_duration_th_2k_7_0_pos 0 +#define reg_tinr_imp_duration_th_2k_7_0_len 8 +#define reg_tinr_imp_duration_th_2k_7_0_lsb 0 +#define xd_p_reg_tinr_imp_duration_th_2k_8 0xA084 +#define reg_tinr_imp_duration_th_2k_8_pos 0 +#define reg_tinr_imp_duration_th_2k_8_len 1 +#define reg_tinr_imp_duration_th_2k_8_lsb 0 +#define xd_p_reg_tinr_imp_duration_th_8k_7_0 0xA085 +#define reg_tinr_imp_duration_th_8k_7_0_pos 0 +#define reg_tinr_imp_duration_th_8k_7_0_len 8 +#define reg_tinr_imp_duration_th_8k_7_0_lsb 0 +#define xd_p_reg_tinr_imp_duration_th_8k_10_8 0xA086 +#define reg_tinr_imp_duration_th_8k_10_8_pos 0 +#define reg_tinr_imp_duration_th_8k_10_8_len 3 +#define reg_tinr_imp_duration_th_8k_10_8_lsb 8 +#define xd_p_reg_tinr_freq_ratio_6m_7_0 0xA087 +#define reg_tinr_freq_ratio_6m_7_0_pos 0 +#define reg_tinr_freq_ratio_6m_7_0_len 8 +#define reg_tinr_freq_ratio_6m_7_0_lsb 0 +#define xd_p_reg_tinr_freq_ratio_6m_12_8 0xA088 +#define reg_tinr_freq_ratio_6m_12_8_pos 0 +#define reg_tinr_freq_ratio_6m_12_8_len 5 +#define reg_tinr_freq_ratio_6m_12_8_lsb 8 +#define xd_p_reg_tinr_freq_ratio_7m_7_0 0xA089 +#define reg_tinr_freq_ratio_7m_7_0_pos 0 +#define reg_tinr_freq_ratio_7m_7_0_len 8 +#define reg_tinr_freq_ratio_7m_7_0_lsb 0 +#define xd_p_reg_tinr_freq_ratio_7m_12_8 0xA08A +#define reg_tinr_freq_ratio_7m_12_8_pos 0 +#define reg_tinr_freq_ratio_7m_12_8_len 5 +#define reg_tinr_freq_ratio_7m_12_8_lsb 8 +#define xd_p_reg_tinr_freq_ratio_8m_7_0 0xA08B +#define reg_tinr_freq_ratio_8m_7_0_pos 0 +#define reg_tinr_freq_ratio_8m_7_0_len 8 +#define reg_tinr_freq_ratio_8m_7_0_lsb 0 +#define xd_p_reg_tinr_freq_ratio_8m_12_8 0xA08C +#define reg_tinr_freq_ratio_8m_12_8_pos 0 +#define reg_tinr_freq_ratio_8m_12_8_len 5 +#define reg_tinr_freq_ratio_8m_12_8_lsb 8 +#define xd_p_reg_tinr_imp_duration_th_low_2k 0xA08D +#define reg_tinr_imp_duration_th_low_2k_pos 0 +#define reg_tinr_imp_duration_th_low_2k_len 8 +#define reg_tinr_imp_duration_th_low_2k_lsb 0 +#define xd_p_reg_tinr_imp_duration_th_low_8k 0xA08E +#define reg_tinr_imp_duration_th_low_8k_pos 0 +#define reg_tinr_imp_duration_th_low_8k_len 8 +#define reg_tinr_imp_duration_th_low_8k_lsb 0 +#define xd_r_reg_tinr_counter_7_0 0xA090 +#define reg_tinr_counter_7_0_pos 0 +#define reg_tinr_counter_7_0_len 8 +#define reg_tinr_counter_7_0_lsb 0 +#define xd_r_reg_tinr_counter_15_8 0xA091 +#define reg_tinr_counter_15_8_pos 0 +#define reg_tinr_counter_15_8_len 8 +#define reg_tinr_counter_15_8_lsb 8 +#define xd_p_reg_tinr_adative_tinr_en 0xA093 +#define reg_tinr_adative_tinr_en_pos 0 +#define reg_tinr_adative_tinr_en_len 1 +#define reg_tinr_adative_tinr_en_lsb 0 +#define xd_p_reg_tinr_peak_fifo_size 0xA093 +#define reg_tinr_peak_fifo_size_pos 1 +#define reg_tinr_peak_fifo_size_len 5 +#define reg_tinr_peak_fifo_size_lsb 0 +#define xd_p_reg_tinr_counter_rst 0xA093 +#define reg_tinr_counter_rst_pos 6 +#define reg_tinr_counter_rst_len 1 +#define reg_tinr_counter_rst_lsb 0 +#define xd_p_reg_tinr_search_period_7_0 0xA094 +#define reg_tinr_search_period_7_0_pos 0 +#define reg_tinr_search_period_7_0_len 8 +#define reg_tinr_search_period_7_0_lsb 0 +#define xd_p_reg_tinr_search_period_15_8 0xA095 +#define reg_tinr_search_period_15_8_pos 0 +#define reg_tinr_search_period_15_8_len 8 +#define reg_tinr_search_period_15_8_lsb 8 +#define xd_p_reg_ccifs_fcw_7_0 0xA0A0 +#define reg_ccifs_fcw_7_0_pos 0 +#define reg_ccifs_fcw_7_0_len 8 +#define reg_ccifs_fcw_7_0_lsb 0 +#define xd_p_reg_ccifs_fcw_12_8 0xA0A1 +#define reg_ccifs_fcw_12_8_pos 0 +#define reg_ccifs_fcw_12_8_len 5 +#define reg_ccifs_fcw_12_8_lsb 8 +#define xd_p_reg_ccifs_spec_inv 0xA0A1 +#define reg_ccifs_spec_inv_pos 5 +#define reg_ccifs_spec_inv_len 1 +#define reg_ccifs_spec_inv_lsb 0 +#define xd_p_reg_gp_trigger 0xA0A2 +#define reg_gp_trigger_pos 0 +#define reg_gp_trigger_len 1 +#define reg_gp_trigger_lsb 0 +#define xd_p_reg_trigger_sel 0xA0A2 +#define reg_trigger_sel_pos 1 +#define reg_trigger_sel_len 2 +#define reg_trigger_sel_lsb 0 +#define xd_p_reg_debug_ofdm 0xA0A2 +#define reg_debug_ofdm_pos 3 +#define reg_debug_ofdm_len 2 +#define reg_debug_ofdm_lsb 0 +#define xd_p_reg_trigger_module_sel 0xA0A3 +#define reg_trigger_module_sel_pos 0 +#define reg_trigger_module_sel_len 6 +#define reg_trigger_module_sel_lsb 0 +#define xd_p_reg_trigger_set_sel 0xA0A4 +#define reg_trigger_set_sel_pos 0 +#define reg_trigger_set_sel_len 6 +#define reg_trigger_set_sel_lsb 0 +#define xd_p_reg_fw_int_mask_n 0xA0A4 +#define reg_fw_int_mask_n_pos 6 +#define reg_fw_int_mask_n_len 1 +#define reg_fw_int_mask_n_lsb 0 +#define xd_p_reg_debug_group 0xA0A5 +#define reg_debug_group_pos 0 +#define reg_debug_group_len 4 +#define reg_debug_group_lsb 0 +#define xd_p_reg_odbg_clk_sel 0xA0A5 +#define reg_odbg_clk_sel_pos 4 +#define reg_odbg_clk_sel_len 2 +#define reg_odbg_clk_sel_lsb 0 +#define xd_p_reg_ccif_sc 0xA0C0 +#define reg_ccif_sc_pos 0 +#define reg_ccif_sc_len 4 +#define reg_ccif_sc_lsb 0 +#define xd_r_reg_ccif_saturate 0xA0C1 +#define reg_ccif_saturate_pos 0 +#define reg_ccif_saturate_len 2 +#define reg_ccif_saturate_lsb 0 +#define xd_r_reg_antif_saturate 0xA0C1 +#define reg_antif_saturate_pos 2 +#define reg_antif_saturate_len 4 +#define reg_antif_saturate_lsb 0 +#define xd_r_reg_acif_saturate 0xA0C2 +#define reg_acif_saturate_pos 0 +#define reg_acif_saturate_len 8 +#define reg_acif_saturate_lsb 0 +#define xd_p_reg_tmr_timer0_threshold_7_0 0xA0C8 +#define reg_tmr_timer0_threshold_7_0_pos 0 +#define reg_tmr_timer0_threshold_7_0_len 8 +#define reg_tmr_timer0_threshold_7_0_lsb 0 +#define xd_p_reg_tmr_timer0_threshold_15_8 0xA0C9 +#define reg_tmr_timer0_threshold_15_8_pos 0 +#define reg_tmr_timer0_threshold_15_8_len 8 +#define reg_tmr_timer0_threshold_15_8_lsb 8 +#define xd_p_reg_tmr_timer0_enable 0xA0CA +#define reg_tmr_timer0_enable_pos 0 +#define reg_tmr_timer0_enable_len 1 +#define reg_tmr_timer0_enable_lsb 0 +#define xd_p_reg_tmr_timer0_clk_sel 0xA0CA +#define reg_tmr_timer0_clk_sel_pos 1 +#define reg_tmr_timer0_clk_sel_len 1 +#define reg_tmr_timer0_clk_sel_lsb 0 +#define xd_p_reg_tmr_timer0_int 0xA0CA +#define reg_tmr_timer0_int_pos 2 +#define reg_tmr_timer0_int_len 1 +#define reg_tmr_timer0_int_lsb 0 +#define xd_p_reg_tmr_timer0_rst 0xA0CA +#define reg_tmr_timer0_rst_pos 3 +#define reg_tmr_timer0_rst_len 1 +#define reg_tmr_timer0_rst_lsb 0 +#define xd_r_reg_tmr_timer0_count_7_0 0xA0CB +#define reg_tmr_timer0_count_7_0_pos 0 +#define reg_tmr_timer0_count_7_0_len 8 +#define reg_tmr_timer0_count_7_0_lsb 0 +#define xd_r_reg_tmr_timer0_count_15_8 0xA0CC +#define reg_tmr_timer0_count_15_8_pos 0 +#define reg_tmr_timer0_count_15_8_len 8 +#define reg_tmr_timer0_count_15_8_lsb 8 +#define xd_p_reg_suspend 0xA0CD +#define reg_suspend_pos 0 +#define reg_suspend_len 1 +#define reg_suspend_lsb 0 +#define xd_p_reg_suspend_rdy 0xA0CD +#define reg_suspend_rdy_pos 1 +#define reg_suspend_rdy_len 1 +#define reg_suspend_rdy_lsb 0 +#define xd_p_reg_resume 0xA0CD +#define reg_resume_pos 2 +#define reg_resume_len 1 +#define reg_resume_lsb 0 +#define xd_p_reg_resume_rdy 0xA0CD +#define reg_resume_rdy_pos 3 +#define reg_resume_rdy_len 1 +#define reg_resume_rdy_lsb 0 +#define xd_p_reg_fmf 0xA0CE +#define reg_fmf_pos 0 +#define reg_fmf_len 8 +#define reg_fmf_lsb 0 +#define xd_p_ccid_accumulate_num_2k_7_0 0xA100 +#define ccid_accumulate_num_2k_7_0_pos 0 +#define ccid_accumulate_num_2k_7_0_len 8 +#define ccid_accumulate_num_2k_7_0_lsb 0 +#define xd_p_ccid_accumulate_num_2k_12_8 0xA101 +#define ccid_accumulate_num_2k_12_8_pos 0 +#define ccid_accumulate_num_2k_12_8_len 5 +#define ccid_accumulate_num_2k_12_8_lsb 8 +#define xd_p_ccid_accumulate_num_8k_7_0 0xA102 +#define ccid_accumulate_num_8k_7_0_pos 0 +#define ccid_accumulate_num_8k_7_0_len 8 +#define ccid_accumulate_num_8k_7_0_lsb 0 +#define xd_p_ccid_accumulate_num_8k_14_8 0xA103 +#define ccid_accumulate_num_8k_14_8_pos 0 +#define ccid_accumulate_num_8k_14_8_len 7 +#define ccid_accumulate_num_8k_14_8_lsb 8 +#define xd_p_ccid_desired_level_0 0xA103 +#define ccid_desired_level_0_pos 7 +#define ccid_desired_level_0_len 1 +#define ccid_desired_level_0_lsb 0 +#define xd_p_ccid_desired_level_8_1 0xA104 +#define ccid_desired_level_8_1_pos 0 +#define ccid_desired_level_8_1_len 8 +#define ccid_desired_level_8_1_lsb 1 +#define xd_p_ccid_apply_delay 0xA105 +#define ccid_apply_delay_pos 0 +#define ccid_apply_delay_len 7 +#define ccid_apply_delay_lsb 0 +#define xd_p_ccid_CCID_Threshold1 0xA106 +#define ccid_CCID_Threshold1_pos 0 +#define ccid_CCID_Threshold1_len 8 +#define ccid_CCID_Threshold1_lsb 0 +#define xd_p_ccid_CCID_Threshold2 0xA107 +#define ccid_CCID_Threshold2_pos 0 +#define ccid_CCID_Threshold2_len 8 +#define ccid_CCID_Threshold2_lsb 0 +#define xd_p_reg_ccid_gain_scale 0xA108 +#define reg_ccid_gain_scale_pos 0 +#define reg_ccid_gain_scale_len 4 +#define reg_ccid_gain_scale_lsb 0 +#define xd_p_reg_ccid2_passband_gain_set 0xA108 +#define reg_ccid2_passband_gain_set_pos 4 +#define reg_ccid2_passband_gain_set_len 4 +#define reg_ccid2_passband_gain_set_lsb 0 +#define xd_r_ccid_multiplier_7_0 0xA109 +#define ccid_multiplier_7_0_pos 0 +#define ccid_multiplier_7_0_len 8 +#define ccid_multiplier_7_0_lsb 0 +#define xd_r_ccid_multiplier_15_8 0xA10A +#define ccid_multiplier_15_8_pos 0 +#define ccid_multiplier_15_8_len 8 +#define ccid_multiplier_15_8_lsb 8 +#define xd_r_ccid_right_shift_bits 0xA10B +#define ccid_right_shift_bits_pos 0 +#define ccid_right_shift_bits_len 4 +#define ccid_right_shift_bits_lsb 0 +#define xd_r_reg_ccid_sx_7_0 0xA10C +#define reg_ccid_sx_7_0_pos 0 +#define reg_ccid_sx_7_0_len 8 +#define reg_ccid_sx_7_0_lsb 0 +#define xd_r_reg_ccid_sx_15_8 0xA10D +#define reg_ccid_sx_15_8_pos 0 +#define reg_ccid_sx_15_8_len 8 +#define reg_ccid_sx_15_8_lsb 8 +#define xd_r_reg_ccid_sx_21_16 0xA10E +#define reg_ccid_sx_21_16_pos 0 +#define reg_ccid_sx_21_16_len 6 +#define reg_ccid_sx_21_16_lsb 16 +#define xd_r_reg_ccid_sy_7_0 0xA110 +#define reg_ccid_sy_7_0_pos 0 +#define reg_ccid_sy_7_0_len 8 +#define reg_ccid_sy_7_0_lsb 0 +#define xd_r_reg_ccid_sy_15_8 0xA111 +#define reg_ccid_sy_15_8_pos 0 +#define reg_ccid_sy_15_8_len 8 +#define reg_ccid_sy_15_8_lsb 8 +#define xd_r_reg_ccid_sy_23_16 0xA112 +#define reg_ccid_sy_23_16_pos 0 +#define reg_ccid_sy_23_16_len 8 +#define reg_ccid_sy_23_16_lsb 16 +#define xd_r_reg_ccid2_sz_7_0 0xA114 +#define reg_ccid2_sz_7_0_pos 0 +#define reg_ccid2_sz_7_0_len 8 +#define reg_ccid2_sz_7_0_lsb 0 +#define xd_r_reg_ccid2_sz_15_8 0xA115 +#define reg_ccid2_sz_15_8_pos 0 +#define reg_ccid2_sz_15_8_len 8 +#define reg_ccid2_sz_15_8_lsb 8 +#define xd_r_reg_ccid2_sz_23_16 0xA116 +#define reg_ccid2_sz_23_16_pos 0 +#define reg_ccid2_sz_23_16_len 8 +#define reg_ccid2_sz_23_16_lsb 16 +#define xd_r_reg_ccid2_sz_25_24 0xA117 +#define reg_ccid2_sz_25_24_pos 0 +#define reg_ccid2_sz_25_24_len 2 +#define reg_ccid2_sz_25_24_lsb 24 +#define xd_r_reg_ccid2_sy_7_0 0xA118 +#define reg_ccid2_sy_7_0_pos 0 +#define reg_ccid2_sy_7_0_len 8 +#define reg_ccid2_sy_7_0_lsb 0 +#define xd_r_reg_ccid2_sy_15_8 0xA119 +#define reg_ccid2_sy_15_8_pos 0 +#define reg_ccid2_sy_15_8_len 8 +#define reg_ccid2_sy_15_8_lsb 8 +#define xd_r_reg_ccid2_sy_23_16 0xA11A +#define reg_ccid2_sy_23_16_pos 0 +#define reg_ccid2_sy_23_16_len 8 +#define reg_ccid2_sy_23_16_lsb 16 +#define xd_r_reg_ccid2_sy_25_24 0xA11B +#define reg_ccid2_sy_25_24_pos 0 +#define reg_ccid2_sy_25_24_len 2 +#define reg_ccid2_sy_25_24_lsb 24 +#define xd_p_dagc1_accumulate_num_2k_7_0 0xA120 +#define dagc1_accumulate_num_2k_7_0_pos 0 +#define dagc1_accumulate_num_2k_7_0_len 8 +#define dagc1_accumulate_num_2k_7_0_lsb 0 +#define xd_p_dagc1_accumulate_num_2k_12_8 0xA121 +#define dagc1_accumulate_num_2k_12_8_pos 0 +#define dagc1_accumulate_num_2k_12_8_len 5 +#define dagc1_accumulate_num_2k_12_8_lsb 8 +#define xd_p_dagc1_accumulate_num_8k_7_0 0xA122 +#define dagc1_accumulate_num_8k_7_0_pos 0 +#define dagc1_accumulate_num_8k_7_0_len 8 +#define dagc1_accumulate_num_8k_7_0_lsb 0 +#define xd_p_dagc1_accumulate_num_8k_14_8 0xA123 +#define dagc1_accumulate_num_8k_14_8_pos 0 +#define dagc1_accumulate_num_8k_14_8_len 7 +#define dagc1_accumulate_num_8k_14_8_lsb 8 +#define xd_p_dagc1_desired_level_0 0xA123 +#define dagc1_desired_level_0_pos 7 +#define dagc1_desired_level_0_len 1 +#define dagc1_desired_level_0_lsb 0 +#define xd_p_dagc1_desired_level_8_1 0xA124 +#define dagc1_desired_level_8_1_pos 0 +#define dagc1_desired_level_8_1_len 8 +#define dagc1_desired_level_8_1_lsb 1 +#define xd_p_dagc1_apply_delay 0xA125 +#define dagc1_apply_delay_pos 0 +#define dagc1_apply_delay_len 7 +#define dagc1_apply_delay_lsb 0 +#define xd_p_dagc1_bypass_scale_ctl 0xA126 +#define dagc1_bypass_scale_ctl_pos 0 +#define dagc1_bypass_scale_ctl_len 2 +#define dagc1_bypass_scale_ctl_lsb 0 +#define xd_p_reg_dagc1_in_sat_cnt_7_0 0xA127 +#define reg_dagc1_in_sat_cnt_7_0_pos 0 +#define reg_dagc1_in_sat_cnt_7_0_len 8 +#define reg_dagc1_in_sat_cnt_7_0_lsb 0 +#define xd_p_reg_dagc1_in_sat_cnt_15_8 0xA128 +#define reg_dagc1_in_sat_cnt_15_8_pos 0 +#define reg_dagc1_in_sat_cnt_15_8_len 8 +#define reg_dagc1_in_sat_cnt_15_8_lsb 8 +#define xd_p_reg_dagc1_in_sat_cnt_23_16 0xA129 +#define reg_dagc1_in_sat_cnt_23_16_pos 0 +#define reg_dagc1_in_sat_cnt_23_16_len 8 +#define reg_dagc1_in_sat_cnt_23_16_lsb 16 +#define xd_p_reg_dagc1_in_sat_cnt_31_24 0xA12A +#define reg_dagc1_in_sat_cnt_31_24_pos 0 +#define reg_dagc1_in_sat_cnt_31_24_len 8 +#define reg_dagc1_in_sat_cnt_31_24_lsb 24 +#define xd_p_reg_dagc1_out_sat_cnt_7_0 0xA12B +#define reg_dagc1_out_sat_cnt_7_0_pos 0 +#define reg_dagc1_out_sat_cnt_7_0_len 8 +#define reg_dagc1_out_sat_cnt_7_0_lsb 0 +#define xd_p_reg_dagc1_out_sat_cnt_15_8 0xA12C +#define reg_dagc1_out_sat_cnt_15_8_pos 0 +#define reg_dagc1_out_sat_cnt_15_8_len 8 +#define reg_dagc1_out_sat_cnt_15_8_lsb 8 +#define xd_p_reg_dagc1_out_sat_cnt_23_16 0xA12D +#define reg_dagc1_out_sat_cnt_23_16_pos 0 +#define reg_dagc1_out_sat_cnt_23_16_len 8 +#define reg_dagc1_out_sat_cnt_23_16_lsb 16 +#define xd_p_reg_dagc1_out_sat_cnt_31_24 0xA12E +#define reg_dagc1_out_sat_cnt_31_24_pos 0 +#define reg_dagc1_out_sat_cnt_31_24_len 8 +#define reg_dagc1_out_sat_cnt_31_24_lsb 24 +#define xd_r_dagc1_multiplier_7_0 0xA136 +#define dagc1_multiplier_7_0_pos 0 +#define dagc1_multiplier_7_0_len 8 +#define dagc1_multiplier_7_0_lsb 0 +#define xd_r_dagc1_multiplier_15_8 0xA137 +#define dagc1_multiplier_15_8_pos 0 +#define dagc1_multiplier_15_8_len 8 +#define dagc1_multiplier_15_8_lsb 8 +#define xd_r_dagc1_right_shift_bits 0xA138 +#define dagc1_right_shift_bits_pos 0 +#define dagc1_right_shift_bits_len 4 +#define dagc1_right_shift_bits_lsb 0 +#define xd_p_reg_bfs_fcw_7_0 0xA140 +#define reg_bfs_fcw_7_0_pos 0 +#define reg_bfs_fcw_7_0_len 8 +#define reg_bfs_fcw_7_0_lsb 0 +#define xd_p_reg_bfs_fcw_15_8 0xA141 +#define reg_bfs_fcw_15_8_pos 0 +#define reg_bfs_fcw_15_8_len 8 +#define reg_bfs_fcw_15_8_lsb 8 +#define xd_p_reg_bfs_fcw_22_16 0xA142 +#define reg_bfs_fcw_22_16_pos 0 +#define reg_bfs_fcw_22_16_len 7 +#define reg_bfs_fcw_22_16_lsb 16 +#define xd_p_reg_antif_sf_7_0 0xA144 +#define reg_antif_sf_7_0_pos 0 +#define reg_antif_sf_7_0_len 8 +#define reg_antif_sf_7_0_lsb 0 +#define xd_p_reg_antif_sf_11_8 0xA145 +#define reg_antif_sf_11_8_pos 0 +#define reg_antif_sf_11_8_len 4 +#define reg_antif_sf_11_8_lsb 8 +#define xd_r_bfs_fcw_q_7_0 0xA150 +#define bfs_fcw_q_7_0_pos 0 +#define bfs_fcw_q_7_0_len 8 +#define bfs_fcw_q_7_0_lsb 0 +#define xd_r_bfs_fcw_q_15_8 0xA151 +#define bfs_fcw_q_15_8_pos 0 +#define bfs_fcw_q_15_8_len 8 +#define bfs_fcw_q_15_8_lsb 8 +#define xd_r_bfs_fcw_q_22_16 0xA152 +#define bfs_fcw_q_22_16_pos 0 +#define bfs_fcw_q_22_16_len 7 +#define bfs_fcw_q_22_16_lsb 16 +#define xd_p_reg_dca_enu 0xA160 +#define reg_dca_enu_pos 0 +#define reg_dca_enu_len 1 +#define reg_dca_enu_lsb 0 +#define xd_p_reg_dca_enl 0xA160 +#define reg_dca_enl_pos 1 +#define reg_dca_enl_len 1 +#define reg_dca_enl_lsb 0 +#define xd_p_reg_dca_lower_chip 0xA160 +#define reg_dca_lower_chip_pos 2 +#define reg_dca_lower_chip_len 1 +#define reg_dca_lower_chip_lsb 0 +#define xd_p_reg_dca_upper_chip 0xA160 +#define reg_dca_upper_chip_pos 3 +#define reg_dca_upper_chip_len 1 +#define reg_dca_upper_chip_lsb 0 +#define xd_p_reg_dca_platch 0xA160 +#define reg_dca_platch_pos 4 +#define reg_dca_platch_len 1 +#define reg_dca_platch_lsb 0 +#define xd_p_reg_dca_th 0xA161 +#define reg_dca_th_pos 0 +#define reg_dca_th_len 5 +#define reg_dca_th_lsb 0 +#define xd_p_reg_dca_scale 0xA162 +#define reg_dca_scale_pos 0 +#define reg_dca_scale_len 4 +#define reg_dca_scale_lsb 0 +#define xd_p_reg_dca_tone_7_0 0xA163 +#define reg_dca_tone_7_0_pos 0 +#define reg_dca_tone_7_0_len 8 +#define reg_dca_tone_7_0_lsb 0 +#define xd_p_reg_dca_tone_12_8 0xA164 +#define reg_dca_tone_12_8_pos 0 +#define reg_dca_tone_12_8_len 5 +#define reg_dca_tone_12_8_lsb 8 +#define xd_p_reg_dca_time_7_0 0xA165 +#define reg_dca_time_7_0_pos 0 +#define reg_dca_time_7_0_len 8 +#define reg_dca_time_7_0_lsb 0 +#define xd_p_reg_dca_time_15_8 0xA166 +#define reg_dca_time_15_8_pos 0 +#define reg_dca_time_15_8_len 8 +#define reg_dca_time_15_8_lsb 8 +#define xd_r_dcasm 0xA167 +#define dcasm_pos 0 +#define dcasm_len 3 +#define dcasm_lsb 0 +#define xd_p_reg_qnt_valuew_7_0 0xA168 +#define reg_qnt_valuew_7_0_pos 0 +#define reg_qnt_valuew_7_0_len 8 +#define reg_qnt_valuew_7_0_lsb 0 +#define xd_p_reg_qnt_valuew_10_8 0xA169 +#define reg_qnt_valuew_10_8_pos 0 +#define reg_qnt_valuew_10_8_len 3 +#define reg_qnt_valuew_10_8_lsb 8 +#define xd_p_dca_sbx_gain_diff_7_0 0xA16A +#define dca_sbx_gain_diff_7_0_pos 0 +#define dca_sbx_gain_diff_7_0_len 8 +#define dca_sbx_gain_diff_7_0_lsb 0 +#define xd_p_dca_sbx_gain_diff_9_8 0xA16B +#define dca_sbx_gain_diff_9_8_pos 0 +#define dca_sbx_gain_diff_9_8_len 2 +#define dca_sbx_gain_diff_9_8_lsb 8 +#define xd_p_reg_dca_stand_alone 0xA16C +#define reg_dca_stand_alone_pos 0 +#define reg_dca_stand_alone_len 1 +#define reg_dca_stand_alone_lsb 0 +#define xd_p_reg_dca_upper_out_en 0xA16C +#define reg_dca_upper_out_en_pos 1 +#define reg_dca_upper_out_en_len 1 +#define reg_dca_upper_out_en_lsb 0 +#define xd_p_reg_dca_rc_en 0xA16C +#define reg_dca_rc_en_pos 2 +#define reg_dca_rc_en_len 1 +#define reg_dca_rc_en_lsb 0 +#define xd_p_reg_dca_retrain_send 0xA16C +#define reg_dca_retrain_send_pos 3 +#define reg_dca_retrain_send_len 1 +#define reg_dca_retrain_send_lsb 0 +#define xd_p_reg_dca_retrain_rec 0xA16C +#define reg_dca_retrain_rec_pos 4 +#define reg_dca_retrain_rec_len 1 +#define reg_dca_retrain_rec_lsb 0 +#define xd_p_reg_dca_api_tpsrdy 0xA16C +#define reg_dca_api_tpsrdy_pos 5 +#define reg_dca_api_tpsrdy_len 1 +#define reg_dca_api_tpsrdy_lsb 0 +#define xd_p_reg_dca_symbol_gap 0xA16D +#define reg_dca_symbol_gap_pos 0 +#define reg_dca_symbol_gap_len 4 +#define reg_dca_symbol_gap_lsb 0 +#define xd_p_reg_qnt_nfvaluew_7_0 0xA16E +#define reg_qnt_nfvaluew_7_0_pos 0 +#define reg_qnt_nfvaluew_7_0_len 8 +#define reg_qnt_nfvaluew_7_0_lsb 0 +#define xd_p_reg_qnt_nfvaluew_10_8 0xA16F +#define reg_qnt_nfvaluew_10_8_pos 0 +#define reg_qnt_nfvaluew_10_8_len 3 +#define reg_qnt_nfvaluew_10_8_lsb 8 +#define xd_p_reg_qnt_flatness_thr_7_0 0xA170 +#define reg_qnt_flatness_thr_7_0_pos 0 +#define reg_qnt_flatness_thr_7_0_len 8 +#define reg_qnt_flatness_thr_7_0_lsb 0 +#define xd_p_reg_qnt_flatness_thr_9_8 0xA171 +#define reg_qnt_flatness_thr_9_8_pos 0 +#define reg_qnt_flatness_thr_9_8_len 2 +#define reg_qnt_flatness_thr_9_8_lsb 8 +#define xd_p_reg_dca_tone_idx_5_0 0xA171 +#define reg_dca_tone_idx_5_0_pos 2 +#define reg_dca_tone_idx_5_0_len 6 +#define reg_dca_tone_idx_5_0_lsb 0 +#define xd_p_reg_dca_tone_idx_12_6 0xA172 +#define reg_dca_tone_idx_12_6_pos 0 +#define reg_dca_tone_idx_12_6_len 7 +#define reg_dca_tone_idx_12_6_lsb 6 +#define xd_p_reg_dca_data_vld 0xA173 +#define reg_dca_data_vld_pos 0 +#define reg_dca_data_vld_len 1 +#define reg_dca_data_vld_lsb 0 +#define xd_p_reg_dca_read_update 0xA173 +#define reg_dca_read_update_pos 1 +#define reg_dca_read_update_len 1 +#define reg_dca_read_update_lsb 0 +#define xd_r_reg_dca_data_re_5_0 0xA173 +#define reg_dca_data_re_5_0_pos 2 +#define reg_dca_data_re_5_0_len 6 +#define reg_dca_data_re_5_0_lsb 0 +#define xd_r_reg_dca_data_re_10_6 0xA174 +#define reg_dca_data_re_10_6_pos 0 +#define reg_dca_data_re_10_6_len 5 +#define reg_dca_data_re_10_6_lsb 6 +#define xd_r_reg_dca_data_im_7_0 0xA175 +#define reg_dca_data_im_7_0_pos 0 +#define reg_dca_data_im_7_0_len 8 +#define reg_dca_data_im_7_0_lsb 0 +#define xd_r_reg_dca_data_im_10_8 0xA176 +#define reg_dca_data_im_10_8_pos 0 +#define reg_dca_data_im_10_8_len 3 +#define reg_dca_data_im_10_8_lsb 8 +#define xd_r_reg_dca_data_h2_7_0 0xA178 +#define reg_dca_data_h2_7_0_pos 0 +#define reg_dca_data_h2_7_0_len 8 +#define reg_dca_data_h2_7_0_lsb 0 +#define xd_r_reg_dca_data_h2_9_8 0xA179 +#define reg_dca_data_h2_9_8_pos 0 +#define reg_dca_data_h2_9_8_len 2 +#define reg_dca_data_h2_9_8_lsb 8 +#define xd_p_reg_f_adc_7_0 0xA180 +#define reg_f_adc_7_0_pos 0 +#define reg_f_adc_7_0_len 8 +#define reg_f_adc_7_0_lsb 0 +#define xd_p_reg_f_adc_15_8 0xA181 +#define reg_f_adc_15_8_pos 0 +#define reg_f_adc_15_8_len 8 +#define reg_f_adc_15_8_lsb 8 +#define xd_p_reg_f_adc_23_16 0xA182 +#define reg_f_adc_23_16_pos 0 +#define reg_f_adc_23_16_len 8 +#define reg_f_adc_23_16_lsb 16 +#define xd_r_intp_mu_7_0 0xA190 +#define intp_mu_7_0_pos 0 +#define intp_mu_7_0_len 8 +#define intp_mu_7_0_lsb 0 +#define xd_r_intp_mu_15_8 0xA191 +#define intp_mu_15_8_pos 0 +#define intp_mu_15_8_len 8 +#define intp_mu_15_8_lsb 8 +#define xd_r_intp_mu_19_16 0xA192 +#define intp_mu_19_16_pos 0 +#define intp_mu_19_16_len 4 +#define intp_mu_19_16_lsb 16 +#define xd_p_reg_agc_rst 0xA1A0 +#define reg_agc_rst_pos 0 +#define reg_agc_rst_len 1 +#define reg_agc_rst_lsb 0 +#define xd_p_rf_agc_en 0xA1A0 +#define rf_agc_en_pos 1 +#define rf_agc_en_len 1 +#define rf_agc_en_lsb 0 +#define xd_p_rf_agc_dis 0xA1A0 +#define rf_agc_dis_pos 2 +#define rf_agc_dis_len 1 +#define rf_agc_dis_lsb 0 +#define xd_p_if_agc_rst 0xA1A0 +#define if_agc_rst_pos 3 +#define if_agc_rst_len 1 +#define if_agc_rst_lsb 0 +#define xd_p_if_agc_en 0xA1A0 +#define if_agc_en_pos 4 +#define if_agc_en_len 1 +#define if_agc_en_lsb 0 +#define xd_p_if_agc_dis 0xA1A0 +#define if_agc_dis_pos 5 +#define if_agc_dis_len 1 +#define if_agc_dis_lsb 0 +#define xd_p_agc_lock 0xA1A0 +#define agc_lock_pos 6 +#define agc_lock_len 1 +#define agc_lock_lsb 0 +#define xd_p_reg_tinr_rst 0xA1A1 +#define reg_tinr_rst_pos 0 +#define reg_tinr_rst_len 1 +#define reg_tinr_rst_lsb 0 +#define xd_p_reg_tinr_en 0xA1A1 +#define reg_tinr_en_pos 1 +#define reg_tinr_en_len 1 +#define reg_tinr_en_lsb 0 +#define xd_p_reg_ccifs_en 0xA1A2 +#define reg_ccifs_en_pos 0 +#define reg_ccifs_en_len 1 +#define reg_ccifs_en_lsb 0 +#define xd_p_reg_ccifs_dis 0xA1A2 +#define reg_ccifs_dis_pos 1 +#define reg_ccifs_dis_len 1 +#define reg_ccifs_dis_lsb 0 +#define xd_p_reg_ccifs_rst 0xA1A2 +#define reg_ccifs_rst_pos 2 +#define reg_ccifs_rst_len 1 +#define reg_ccifs_rst_lsb 0 +#define xd_p_reg_ccifs_byp 0xA1A2 +#define reg_ccifs_byp_pos 3 +#define reg_ccifs_byp_len 1 +#define reg_ccifs_byp_lsb 0 +#define xd_p_reg_ccif_en 0xA1A3 +#define reg_ccif_en_pos 0 +#define reg_ccif_en_len 1 +#define reg_ccif_en_lsb 0 +#define xd_p_reg_ccif_dis 0xA1A3 +#define reg_ccif_dis_pos 1 +#define reg_ccif_dis_len 1 +#define reg_ccif_dis_lsb 0 +#define xd_p_reg_ccif_rst 0xA1A3 +#define reg_ccif_rst_pos 2 +#define reg_ccif_rst_len 1 +#define reg_ccif_rst_lsb 0 +#define xd_p_reg_ccif_byp 0xA1A3 +#define reg_ccif_byp_pos 3 +#define reg_ccif_byp_len 1 +#define reg_ccif_byp_lsb 0 +#define xd_p_dagc1_rst 0xA1A4 +#define dagc1_rst_pos 0 +#define dagc1_rst_len 1 +#define dagc1_rst_lsb 0 +#define xd_p_dagc1_en 0xA1A4 +#define dagc1_en_pos 1 +#define dagc1_en_len 1 +#define dagc1_en_lsb 0 +#define xd_p_dagc1_mode 0xA1A4 +#define dagc1_mode_pos 2 +#define dagc1_mode_len 2 +#define dagc1_mode_lsb 0 +#define xd_p_dagc1_done 0xA1A4 +#define dagc1_done_pos 4 +#define dagc1_done_len 1 +#define dagc1_done_lsb 0 +#define xd_p_ccid_rst 0xA1A5 +#define ccid_rst_pos 0 +#define ccid_rst_len 1 +#define ccid_rst_lsb 0 +#define xd_p_ccid_en 0xA1A5 +#define ccid_en_pos 1 +#define ccid_en_len 1 +#define ccid_en_lsb 0 +#define xd_p_ccid_mode 0xA1A5 +#define ccid_mode_pos 2 +#define ccid_mode_len 2 +#define ccid_mode_lsb 0 +#define xd_p_ccid_done 0xA1A5 +#define ccid_done_pos 4 +#define ccid_done_len 1 +#define ccid_done_lsb 0 +#define xd_r_ccid_deted 0xA1A5 +#define ccid_deted_pos 5 +#define ccid_deted_len 1 +#define ccid_deted_lsb 0 +#define xd_p_ccid2_en 0xA1A5 +#define ccid2_en_pos 6 +#define ccid2_en_len 1 +#define ccid2_en_lsb 0 +#define xd_p_ccid2_done 0xA1A5 +#define ccid2_done_pos 7 +#define ccid2_done_len 1 +#define ccid2_done_lsb 0 +#define xd_p_reg_bfs_en 0xA1A6 +#define reg_bfs_en_pos 0 +#define reg_bfs_en_len 1 +#define reg_bfs_en_lsb 0 +#define xd_p_reg_bfs_dis 0xA1A6 +#define reg_bfs_dis_pos 1 +#define reg_bfs_dis_len 1 +#define reg_bfs_dis_lsb 0 +#define xd_p_reg_bfs_rst 0xA1A6 +#define reg_bfs_rst_pos 2 +#define reg_bfs_rst_len 1 +#define reg_bfs_rst_lsb 0 +#define xd_p_reg_bfs_byp 0xA1A6 +#define reg_bfs_byp_pos 3 +#define reg_bfs_byp_len 1 +#define reg_bfs_byp_lsb 0 +#define xd_p_reg_antif_en 0xA1A7 +#define reg_antif_en_pos 0 +#define reg_antif_en_len 1 +#define reg_antif_en_lsb 0 +#define xd_p_reg_antif_dis 0xA1A7 +#define reg_antif_dis_pos 1 +#define reg_antif_dis_len 1 +#define reg_antif_dis_lsb 0 +#define xd_p_reg_antif_rst 0xA1A7 +#define reg_antif_rst_pos 2 +#define reg_antif_rst_len 1 +#define reg_antif_rst_lsb 0 +#define xd_p_reg_antif_byp 0xA1A7 +#define reg_antif_byp_pos 3 +#define reg_antif_byp_len 1 +#define reg_antif_byp_lsb 0 +#define xd_p_intp_en 0xA1A8 +#define intp_en_pos 0 +#define intp_en_len 1 +#define intp_en_lsb 0 +#define xd_p_intp_dis 0xA1A8 +#define intp_dis_pos 1 +#define intp_dis_len 1 +#define intp_dis_lsb 0 +#define xd_p_intp_rst 0xA1A8 +#define intp_rst_pos 2 +#define intp_rst_len 1 +#define intp_rst_lsb 0 +#define xd_p_intp_byp 0xA1A8 +#define intp_byp_pos 3 +#define intp_byp_len 1 +#define intp_byp_lsb 0 +#define xd_p_reg_acif_en 0xA1A9 +#define reg_acif_en_pos 0 +#define reg_acif_en_len 1 +#define reg_acif_en_lsb 0 +#define xd_p_reg_acif_dis 0xA1A9 +#define reg_acif_dis_pos 1 +#define reg_acif_dis_len 1 +#define reg_acif_dis_lsb 0 +#define xd_p_reg_acif_rst 0xA1A9 +#define reg_acif_rst_pos 2 +#define reg_acif_rst_len 1 +#define reg_acif_rst_lsb 0 +#define xd_p_reg_acif_byp 0xA1A9 +#define reg_acif_byp_pos 3 +#define reg_acif_byp_len 1 +#define reg_acif_byp_lsb 0 +#define xd_p_reg_acif_sync_mode 0xA1A9 +#define reg_acif_sync_mode_pos 4 +#define reg_acif_sync_mode_len 1 +#define reg_acif_sync_mode_lsb 0 +#define xd_p_dagc2_rst 0xA1AA +#define dagc2_rst_pos 0 +#define dagc2_rst_len 1 +#define dagc2_rst_lsb 0 +#define xd_p_dagc2_en 0xA1AA +#define dagc2_en_pos 1 +#define dagc2_en_len 1 +#define dagc2_en_lsb 0 +#define xd_p_dagc2_mode 0xA1AA +#define dagc2_mode_pos 2 +#define dagc2_mode_len 2 +#define dagc2_mode_lsb 0 +#define xd_p_dagc2_done 0xA1AA +#define dagc2_done_pos 4 +#define dagc2_done_len 1 +#define dagc2_done_lsb 0 +#define xd_p_reg_dca_en 0xA1AB +#define reg_dca_en_pos 0 +#define reg_dca_en_len 1 +#define reg_dca_en_lsb 0 +#define xd_p_dagc2_accumulate_num_2k_7_0 0xA1C0 +#define dagc2_accumulate_num_2k_7_0_pos 0 +#define dagc2_accumulate_num_2k_7_0_len 8 +#define dagc2_accumulate_num_2k_7_0_lsb 0 +#define xd_p_dagc2_accumulate_num_2k_12_8 0xA1C1 +#define dagc2_accumulate_num_2k_12_8_pos 0 +#define dagc2_accumulate_num_2k_12_8_len 5 +#define dagc2_accumulate_num_2k_12_8_lsb 8 +#define xd_p_dagc2_accumulate_num_8k_7_0 0xA1C2 +#define dagc2_accumulate_num_8k_7_0_pos 0 +#define dagc2_accumulate_num_8k_7_0_len 8 +#define dagc2_accumulate_num_8k_7_0_lsb 0 +#define xd_p_dagc2_accumulate_num_8k_12_8 0xA1C3 +#define dagc2_accumulate_num_8k_12_8_pos 0 +#define dagc2_accumulate_num_8k_12_8_len 5 +#define dagc2_accumulate_num_8k_12_8_lsb 8 +#define xd_p_dagc2_desired_level_2_0 0xA1C3 +#define dagc2_desired_level_2_0_pos 5 +#define dagc2_desired_level_2_0_len 3 +#define dagc2_desired_level_2_0_lsb 0 +#define xd_p_dagc2_desired_level_8_3 0xA1C4 +#define dagc2_desired_level_8_3_pos 0 +#define dagc2_desired_level_8_3_len 6 +#define dagc2_desired_level_8_3_lsb 3 +#define xd_p_dagc2_apply_delay 0xA1C5 +#define dagc2_apply_delay_pos 0 +#define dagc2_apply_delay_len 7 +#define dagc2_apply_delay_lsb 0 +#define xd_p_dagc2_bypass_scale_ctl 0xA1C6 +#define dagc2_bypass_scale_ctl_pos 0 +#define dagc2_bypass_scale_ctl_len 3 +#define dagc2_bypass_scale_ctl_lsb 0 +#define xd_p_dagc2_programmable_shift1 0xA1C7 +#define dagc2_programmable_shift1_pos 0 +#define dagc2_programmable_shift1_len 8 +#define dagc2_programmable_shift1_lsb 0 +#define xd_p_dagc2_programmable_shift2 0xA1C8 +#define dagc2_programmable_shift2_pos 0 +#define dagc2_programmable_shift2_len 8 +#define dagc2_programmable_shift2_lsb 0 +#define xd_p_reg_dagc2_in_sat_cnt_7_0 0xA1C9 +#define reg_dagc2_in_sat_cnt_7_0_pos 0 +#define reg_dagc2_in_sat_cnt_7_0_len 8 +#define reg_dagc2_in_sat_cnt_7_0_lsb 0 +#define xd_p_reg_dagc2_in_sat_cnt_15_8 0xA1CA +#define reg_dagc2_in_sat_cnt_15_8_pos 0 +#define reg_dagc2_in_sat_cnt_15_8_len 8 +#define reg_dagc2_in_sat_cnt_15_8_lsb 8 +#define xd_p_reg_dagc2_in_sat_cnt_23_16 0xA1CB +#define reg_dagc2_in_sat_cnt_23_16_pos 0 +#define reg_dagc2_in_sat_cnt_23_16_len 8 +#define reg_dagc2_in_sat_cnt_23_16_lsb 16 +#define xd_p_reg_dagc2_in_sat_cnt_31_24 0xA1CC +#define reg_dagc2_in_sat_cnt_31_24_pos 0 +#define reg_dagc2_in_sat_cnt_31_24_len 8 +#define reg_dagc2_in_sat_cnt_31_24_lsb 24 +#define xd_p_reg_dagc2_out_sat_cnt_7_0 0xA1CD +#define reg_dagc2_out_sat_cnt_7_0_pos 0 +#define reg_dagc2_out_sat_cnt_7_0_len 8 +#define reg_dagc2_out_sat_cnt_7_0_lsb 0 +#define xd_p_reg_dagc2_out_sat_cnt_15_8 0xA1CE +#define reg_dagc2_out_sat_cnt_15_8_pos 0 +#define reg_dagc2_out_sat_cnt_15_8_len 8 +#define reg_dagc2_out_sat_cnt_15_8_lsb 8 +#define xd_p_reg_dagc2_out_sat_cnt_23_16 0xA1CF +#define reg_dagc2_out_sat_cnt_23_16_pos 0 +#define reg_dagc2_out_sat_cnt_23_16_len 8 +#define reg_dagc2_out_sat_cnt_23_16_lsb 16 +#define xd_p_reg_dagc2_out_sat_cnt_31_24 0xA1D0 +#define reg_dagc2_out_sat_cnt_31_24_pos 0 +#define reg_dagc2_out_sat_cnt_31_24_len 8 +#define reg_dagc2_out_sat_cnt_31_24_lsb 24 +#define xd_r_dagc2_multiplier_7_0 0xA1D6 +#define dagc2_multiplier_7_0_pos 0 +#define dagc2_multiplier_7_0_len 8 +#define dagc2_multiplier_7_0_lsb 0 +#define xd_r_dagc2_multiplier_15_8 0xA1D7 +#define dagc2_multiplier_15_8_pos 0 +#define dagc2_multiplier_15_8_len 8 +#define dagc2_multiplier_15_8_lsb 8 +#define xd_r_dagc2_right_shift_bits 0xA1D8 +#define dagc2_right_shift_bits_pos 0 +#define dagc2_right_shift_bits_len 4 +#define dagc2_right_shift_bits_lsb 0 +#define xd_p_cfoe_NS_coeff1_7_0 0xA200 +#define cfoe_NS_coeff1_7_0_pos 0 +#define cfoe_NS_coeff1_7_0_len 8 +#define cfoe_NS_coeff1_7_0_lsb 0 +#define xd_p_cfoe_NS_coeff1_15_8 0xA201 +#define cfoe_NS_coeff1_15_8_pos 0 +#define cfoe_NS_coeff1_15_8_len 8 +#define cfoe_NS_coeff1_15_8_lsb 8 +#define xd_p_cfoe_NS_coeff1_23_16 0xA202 +#define cfoe_NS_coeff1_23_16_pos 0 +#define cfoe_NS_coeff1_23_16_len 8 +#define cfoe_NS_coeff1_23_16_lsb 16 +#define xd_p_cfoe_NS_coeff1_25_24 0xA203 +#define cfoe_NS_coeff1_25_24_pos 0 +#define cfoe_NS_coeff1_25_24_len 2 +#define cfoe_NS_coeff1_25_24_lsb 24 +#define xd_p_cfoe_NS_coeff2_5_0 0xA203 +#define cfoe_NS_coeff2_5_0_pos 2 +#define cfoe_NS_coeff2_5_0_len 6 +#define cfoe_NS_coeff2_5_0_lsb 0 +#define xd_p_cfoe_NS_coeff2_13_6 0xA204 +#define cfoe_NS_coeff2_13_6_pos 0 +#define cfoe_NS_coeff2_13_6_len 8 +#define cfoe_NS_coeff2_13_6_lsb 6 +#define xd_p_cfoe_NS_coeff2_21_14 0xA205 +#define cfoe_NS_coeff2_21_14_pos 0 +#define cfoe_NS_coeff2_21_14_len 8 +#define cfoe_NS_coeff2_21_14_lsb 14 +#define xd_p_cfoe_NS_coeff2_24_22 0xA206 +#define cfoe_NS_coeff2_24_22_pos 0 +#define cfoe_NS_coeff2_24_22_len 3 +#define cfoe_NS_coeff2_24_22_lsb 22 +#define xd_p_cfoe_lf_c1_4_0 0xA206 +#define cfoe_lf_c1_4_0_pos 3 +#define cfoe_lf_c1_4_0_len 5 +#define cfoe_lf_c1_4_0_lsb 0 +#define xd_p_cfoe_lf_c1_12_5 0xA207 +#define cfoe_lf_c1_12_5_pos 0 +#define cfoe_lf_c1_12_5_len 8 +#define cfoe_lf_c1_12_5_lsb 5 +#define xd_p_cfoe_lf_c1_20_13 0xA208 +#define cfoe_lf_c1_20_13_pos 0 +#define cfoe_lf_c1_20_13_len 8 +#define cfoe_lf_c1_20_13_lsb 13 +#define xd_p_cfoe_lf_c1_25_21 0xA209 +#define cfoe_lf_c1_25_21_pos 0 +#define cfoe_lf_c1_25_21_len 5 +#define cfoe_lf_c1_25_21_lsb 21 +#define xd_p_cfoe_lf_c2_2_0 0xA209 +#define cfoe_lf_c2_2_0_pos 5 +#define cfoe_lf_c2_2_0_len 3 +#define cfoe_lf_c2_2_0_lsb 0 +#define xd_p_cfoe_lf_c2_10_3 0xA20A +#define cfoe_lf_c2_10_3_pos 0 +#define cfoe_lf_c2_10_3_len 8 +#define cfoe_lf_c2_10_3_lsb 3 +#define xd_p_cfoe_lf_c2_18_11 0xA20B +#define cfoe_lf_c2_18_11_pos 0 +#define cfoe_lf_c2_18_11_len 8 +#define cfoe_lf_c2_18_11_lsb 11 +#define xd_p_cfoe_lf_c2_25_19 0xA20C +#define cfoe_lf_c2_25_19_pos 0 +#define cfoe_lf_c2_25_19_len 7 +#define cfoe_lf_c2_25_19_lsb 19 +#define xd_p_cfoe_ifod_7_0 0xA20D +#define cfoe_ifod_7_0_pos 0 +#define cfoe_ifod_7_0_len 8 +#define cfoe_ifod_7_0_lsb 0 +#define xd_p_cfoe_ifod_10_8 0xA20E +#define cfoe_ifod_10_8_pos 0 +#define cfoe_ifod_10_8_len 3 +#define cfoe_ifod_10_8_lsb 8 +#define xd_p_cfoe_Divg_ctr_th 0xA20E +#define cfoe_Divg_ctr_th_pos 4 +#define cfoe_Divg_ctr_th_len 4 +#define cfoe_Divg_ctr_th_lsb 0 +#define xd_p_cfoe_FOT_divg_th 0xA20F +#define cfoe_FOT_divg_th_pos 0 +#define cfoe_FOT_divg_th_len 8 +#define cfoe_FOT_divg_th_lsb 0 +#define xd_p_cfoe_FOT_cnvg_th 0xA210 +#define cfoe_FOT_cnvg_th_pos 0 +#define cfoe_FOT_cnvg_th_len 8 +#define cfoe_FOT_cnvg_th_lsb 0 +#define xd_p_reg_cfoe_offset_7_0 0xA211 +#define reg_cfoe_offset_7_0_pos 0 +#define reg_cfoe_offset_7_0_len 8 +#define reg_cfoe_offset_7_0_lsb 0 +#define xd_p_reg_cfoe_offset_9_8 0xA212 +#define reg_cfoe_offset_9_8_pos 0 +#define reg_cfoe_offset_9_8_len 2 +#define reg_cfoe_offset_9_8_lsb 8 +#define xd_p_reg_cfoe_ifoe_sign_corr 0xA212 +#define reg_cfoe_ifoe_sign_corr_pos 2 +#define reg_cfoe_ifoe_sign_corr_len 1 +#define reg_cfoe_ifoe_sign_corr_lsb 0 +#define xd_r_cfoe_fot_LF_output_7_0 0xA218 +#define cfoe_fot_LF_output_7_0_pos 0 +#define cfoe_fot_LF_output_7_0_len 8 +#define cfoe_fot_LF_output_7_0_lsb 0 +#define xd_r_cfoe_fot_LF_output_15_8 0xA219 +#define cfoe_fot_LF_output_15_8_pos 0 +#define cfoe_fot_LF_output_15_8_len 8 +#define cfoe_fot_LF_output_15_8_lsb 8 +#define xd_r_cfoe_ifo_metric_7_0 0xA21A +#define cfoe_ifo_metric_7_0_pos 0 +#define cfoe_ifo_metric_7_0_len 8 +#define cfoe_ifo_metric_7_0_lsb 0 +#define xd_r_cfoe_ifo_metric_15_8 0xA21B +#define cfoe_ifo_metric_15_8_pos 0 +#define cfoe_ifo_metric_15_8_len 8 +#define cfoe_ifo_metric_15_8_lsb 8 +#define xd_r_cfoe_ifo_metric_23_16 0xA21C +#define cfoe_ifo_metric_23_16_pos 0 +#define cfoe_ifo_metric_23_16_len 8 +#define cfoe_ifo_metric_23_16_lsb 16 +#define xd_p_ste_Nu 0xA220 +#define ste_Nu_pos 0 +#define ste_Nu_len 2 +#define ste_Nu_lsb 0 +#define xd_p_ste_GI 0xA220 +#define ste_GI_pos 2 +#define ste_GI_len 3 +#define ste_GI_lsb 0 +#define xd_p_ste_symbol_num 0xA221 +#define ste_symbol_num_pos 0 +#define ste_symbol_num_len 2 +#define ste_symbol_num_lsb 0 +#define xd_p_ste_sample_num 0xA221 +#define ste_sample_num_pos 2 +#define ste_sample_num_len 2 +#define ste_sample_num_lsb 0 +#define xd_p_reg_ste_buf_en 0xA221 +#define reg_ste_buf_en_pos 7 +#define reg_ste_buf_en_len 1 +#define reg_ste_buf_en_lsb 0 +#define xd_p_ste_FFT_offset_7_0 0xA222 +#define ste_FFT_offset_7_0_pos 0 +#define ste_FFT_offset_7_0_len 8 +#define ste_FFT_offset_7_0_lsb 0 +#define xd_p_ste_FFT_offset_11_8 0xA223 +#define ste_FFT_offset_11_8_pos 0 +#define ste_FFT_offset_11_8_len 4 +#define ste_FFT_offset_11_8_lsb 8 +#define xd_p_reg_ste_tstmod 0xA223 +#define reg_ste_tstmod_pos 5 +#define reg_ste_tstmod_len 1 +#define reg_ste_tstmod_lsb 0 +#define xd_p_ste_adv_start_7_0 0xA224 +#define ste_adv_start_7_0_pos 0 +#define ste_adv_start_7_0_len 8 +#define ste_adv_start_7_0_lsb 0 +#define xd_p_ste_adv_start_10_8 0xA225 +#define ste_adv_start_10_8_pos 0 +#define ste_adv_start_10_8_len 3 +#define ste_adv_start_10_8_lsb 8 +#define xd_p_ste_adv_stop 0xA226 +#define ste_adv_stop_pos 0 +#define ste_adv_stop_len 8 +#define ste_adv_stop_lsb 0 +#define xd_r_ste_P_value_7_0 0xA228 +#define ste_P_value_7_0_pos 0 +#define ste_P_value_7_0_len 8 +#define ste_P_value_7_0_lsb 0 +#define xd_r_ste_P_value_10_8 0xA229 +#define ste_P_value_10_8_pos 0 +#define ste_P_value_10_8_len 3 +#define ste_P_value_10_8_lsb 8 +#define xd_r_ste_M_value_7_0 0xA22A +#define ste_M_value_7_0_pos 0 +#define ste_M_value_7_0_len 8 +#define ste_M_value_7_0_lsb 0 +#define xd_r_ste_M_value_10_8 0xA22B +#define ste_M_value_10_8_pos 0 +#define ste_M_value_10_8_len 3 +#define ste_M_value_10_8_lsb 8 +#define xd_r_ste_H1 0xA22C +#define ste_H1_pos 0 +#define ste_H1_len 7 +#define ste_H1_lsb 0 +#define xd_r_ste_H2 0xA22D +#define ste_H2_pos 0 +#define ste_H2_len 7 +#define ste_H2_lsb 0 +#define xd_r_ste_H3 0xA22E +#define ste_H3_pos 0 +#define ste_H3_len 7 +#define ste_H3_lsb 0 +#define xd_r_ste_H4 0xA22F +#define ste_H4_pos 0 +#define ste_H4_len 7 +#define ste_H4_lsb 0 +#define xd_r_ste_Corr_value_I_7_0 0xA230 +#define ste_Corr_value_I_7_0_pos 0 +#define ste_Corr_value_I_7_0_len 8 +#define ste_Corr_value_I_7_0_lsb 0 +#define xd_r_ste_Corr_value_I_15_8 0xA231 +#define ste_Corr_value_I_15_8_pos 0 +#define ste_Corr_value_I_15_8_len 8 +#define ste_Corr_value_I_15_8_lsb 8 +#define xd_r_ste_Corr_value_I_23_16 0xA232 +#define ste_Corr_value_I_23_16_pos 0 +#define ste_Corr_value_I_23_16_len 8 +#define ste_Corr_value_I_23_16_lsb 16 +#define xd_r_ste_Corr_value_I_27_24 0xA233 +#define ste_Corr_value_I_27_24_pos 0 +#define ste_Corr_value_I_27_24_len 4 +#define ste_Corr_value_I_27_24_lsb 24 +#define xd_r_ste_Corr_value_Q_7_0 0xA234 +#define ste_Corr_value_Q_7_0_pos 0 +#define ste_Corr_value_Q_7_0_len 8 +#define ste_Corr_value_Q_7_0_lsb 0 +#define xd_r_ste_Corr_value_Q_15_8 0xA235 +#define ste_Corr_value_Q_15_8_pos 0 +#define ste_Corr_value_Q_15_8_len 8 +#define ste_Corr_value_Q_15_8_lsb 8 +#define xd_r_ste_Corr_value_Q_23_16 0xA236 +#define ste_Corr_value_Q_23_16_pos 0 +#define ste_Corr_value_Q_23_16_len 8 +#define ste_Corr_value_Q_23_16_lsb 16 +#define xd_r_ste_Corr_value_Q_27_24 0xA237 +#define ste_Corr_value_Q_27_24_pos 0 +#define ste_Corr_value_Q_27_24_len 4 +#define ste_Corr_value_Q_27_24_lsb 24 +#define xd_r_ste_J_num_7_0 0xA238 +#define ste_J_num_7_0_pos 0 +#define ste_J_num_7_0_len 8 +#define ste_J_num_7_0_lsb 0 +#define xd_r_ste_J_num_15_8 0xA239 +#define ste_J_num_15_8_pos 0 +#define ste_J_num_15_8_len 8 +#define ste_J_num_15_8_lsb 8 +#define xd_r_ste_J_num_23_16 0xA23A +#define ste_J_num_23_16_pos 0 +#define ste_J_num_23_16_len 8 +#define ste_J_num_23_16_lsb 16 +#define xd_r_ste_J_num_31_24 0xA23B +#define ste_J_num_31_24_pos 0 +#define ste_J_num_31_24_len 8 +#define ste_J_num_31_24_lsb 24 +#define xd_r_ste_J_den_7_0 0xA23C +#define ste_J_den_7_0_pos 0 +#define ste_J_den_7_0_len 8 +#define ste_J_den_7_0_lsb 0 +#define xd_r_ste_J_den_15_8 0xA23D +#define ste_J_den_15_8_pos 0 +#define ste_J_den_15_8_len 8 +#define ste_J_den_15_8_lsb 8 +#define xd_r_ste_J_den_18_16 0xA23E +#define ste_J_den_18_16_pos 0 +#define ste_J_den_18_16_len 3 +#define ste_J_den_18_16_lsb 16 +#define xd_r_ste_Beacon_Indicator 0xA23E +#define ste_Beacon_Indicator_pos 4 +#define ste_Beacon_Indicator_len 1 +#define ste_Beacon_Indicator_lsb 0 +#define xd_r_tpsd_Frame_Num 0xA250 +#define tpsd_Frame_Num_pos 0 +#define tpsd_Frame_Num_len 2 +#define tpsd_Frame_Num_lsb 0 +#define xd_r_tpsd_Constel 0xA250 +#define tpsd_Constel_pos 2 +#define tpsd_Constel_len 2 +#define tpsd_Constel_lsb 0 +#define xd_r_tpsd_GI 0xA250 +#define tpsd_GI_pos 4 +#define tpsd_GI_len 2 +#define tpsd_GI_lsb 0 +#define xd_r_tpsd_Mode 0xA250 +#define tpsd_Mode_pos 6 +#define tpsd_Mode_len 2 +#define tpsd_Mode_lsb 0 +#define xd_r_tpsd_CR_HP 0xA251 +#define tpsd_CR_HP_pos 0 +#define tpsd_CR_HP_len 3 +#define tpsd_CR_HP_lsb 0 +#define xd_r_tpsd_CR_LP 0xA251 +#define tpsd_CR_LP_pos 3 +#define tpsd_CR_LP_len 3 +#define tpsd_CR_LP_lsb 0 +#define xd_r_tpsd_Hie 0xA252 +#define tpsd_Hie_pos 0 +#define tpsd_Hie_len 3 +#define tpsd_Hie_lsb 0 +#define xd_r_tpsd_Res_Bits 0xA252 +#define tpsd_Res_Bits_pos 3 +#define tpsd_Res_Bits_len 5 +#define tpsd_Res_Bits_lsb 0 +#define xd_r_tpsd_Res_Bits_0 0xA253 +#define tpsd_Res_Bits_0_pos 0 +#define tpsd_Res_Bits_0_len 1 +#define tpsd_Res_Bits_0_lsb 0 +#define xd_r_tpsd_LengthInd 0xA253 +#define tpsd_LengthInd_pos 1 +#define tpsd_LengthInd_len 6 +#define tpsd_LengthInd_lsb 0 +#define xd_r_tpsd_Cell_Id_7_0 0xA254 +#define tpsd_Cell_Id_7_0_pos 0 +#define tpsd_Cell_Id_7_0_len 8 +#define tpsd_Cell_Id_7_0_lsb 0 +#define xd_r_tpsd_Cell_Id_15_8 0xA255 +#define tpsd_Cell_Id_15_8_pos 0 +#define tpsd_Cell_Id_15_8_len 8 +#define tpsd_Cell_Id_15_8_lsb 0 +#define xd_p_reg_fft_mask_tone0_7_0 0xA260 +#define reg_fft_mask_tone0_7_0_pos 0 +#define reg_fft_mask_tone0_7_0_len 8 +#define reg_fft_mask_tone0_7_0_lsb 0 +#define xd_p_reg_fft_mask_tone0_12_8 0xA261 +#define reg_fft_mask_tone0_12_8_pos 0 +#define reg_fft_mask_tone0_12_8_len 5 +#define reg_fft_mask_tone0_12_8_lsb 8 +#define xd_p_reg_fft_mask_tone1_7_0 0xA262 +#define reg_fft_mask_tone1_7_0_pos 0 +#define reg_fft_mask_tone1_7_0_len 8 +#define reg_fft_mask_tone1_7_0_lsb 0 +#define xd_p_reg_fft_mask_tone1_12_8 0xA263 +#define reg_fft_mask_tone1_12_8_pos 0 +#define reg_fft_mask_tone1_12_8_len 5 +#define reg_fft_mask_tone1_12_8_lsb 8 +#define xd_p_reg_fft_mask_tone2_7_0 0xA264 +#define reg_fft_mask_tone2_7_0_pos 0 +#define reg_fft_mask_tone2_7_0_len 8 +#define reg_fft_mask_tone2_7_0_lsb 0 +#define xd_p_reg_fft_mask_tone2_12_8 0xA265 +#define reg_fft_mask_tone2_12_8_pos 0 +#define reg_fft_mask_tone2_12_8_len 5 +#define reg_fft_mask_tone2_12_8_lsb 8 +#define xd_p_reg_fft_mask_tone3_7_0 0xA266 +#define reg_fft_mask_tone3_7_0_pos 0 +#define reg_fft_mask_tone3_7_0_len 8 +#define reg_fft_mask_tone3_7_0_lsb 0 +#define xd_p_reg_fft_mask_tone3_12_8 0xA267 +#define reg_fft_mask_tone3_12_8_pos 0 +#define reg_fft_mask_tone3_12_8_len 5 +#define reg_fft_mask_tone3_12_8_lsb 8 +#define xd_p_reg_fft_mask_from0_7_0 0xA268 +#define reg_fft_mask_from0_7_0_pos 0 +#define reg_fft_mask_from0_7_0_len 8 +#define reg_fft_mask_from0_7_0_lsb 0 +#define xd_p_reg_fft_mask_from0_12_8 0xA269 +#define reg_fft_mask_from0_12_8_pos 0 +#define reg_fft_mask_from0_12_8_len 5 +#define reg_fft_mask_from0_12_8_lsb 8 +#define xd_p_reg_fft_mask_to0_7_0 0xA26A +#define reg_fft_mask_to0_7_0_pos 0 +#define reg_fft_mask_to0_7_0_len 8 +#define reg_fft_mask_to0_7_0_lsb 0 +#define xd_p_reg_fft_mask_to0_12_8 0xA26B +#define reg_fft_mask_to0_12_8_pos 0 +#define reg_fft_mask_to0_12_8_len 5 +#define reg_fft_mask_to0_12_8_lsb 8 +#define xd_p_reg_fft_mask_from1_7_0 0xA26C +#define reg_fft_mask_from1_7_0_pos 0 +#define reg_fft_mask_from1_7_0_len 8 +#define reg_fft_mask_from1_7_0_lsb 0 +#define xd_p_reg_fft_mask_from1_12_8 0xA26D +#define reg_fft_mask_from1_12_8_pos 0 +#define reg_fft_mask_from1_12_8_len 5 +#define reg_fft_mask_from1_12_8_lsb 8 +#define xd_p_reg_fft_mask_to1_7_0 0xA26E +#define reg_fft_mask_to1_7_0_pos 0 +#define reg_fft_mask_to1_7_0_len 8 +#define reg_fft_mask_to1_7_0_lsb 0 +#define xd_p_reg_fft_mask_to1_12_8 0xA26F +#define reg_fft_mask_to1_12_8_pos 0 +#define reg_fft_mask_to1_12_8_len 5 +#define reg_fft_mask_to1_12_8_lsb 8 +#define xd_p_reg_cge_idx0_7_0 0xA280 +#define reg_cge_idx0_7_0_pos 0 +#define reg_cge_idx0_7_0_len 8 +#define reg_cge_idx0_7_0_lsb 0 +#define xd_p_reg_cge_idx0_12_8 0xA281 +#define reg_cge_idx0_12_8_pos 0 +#define reg_cge_idx0_12_8_len 5 +#define reg_cge_idx0_12_8_lsb 8 +#define xd_p_reg_cge_idx1_7_0 0xA282 +#define reg_cge_idx1_7_0_pos 0 +#define reg_cge_idx1_7_0_len 8 +#define reg_cge_idx1_7_0_lsb 0 +#define xd_p_reg_cge_idx1_12_8 0xA283 +#define reg_cge_idx1_12_8_pos 0 +#define reg_cge_idx1_12_8_len 5 +#define reg_cge_idx1_12_8_lsb 8 +#define xd_p_reg_cge_idx2_7_0 0xA284 +#define reg_cge_idx2_7_0_pos 0 +#define reg_cge_idx2_7_0_len 8 +#define reg_cge_idx2_7_0_lsb 0 +#define xd_p_reg_cge_idx2_12_8 0xA285 +#define reg_cge_idx2_12_8_pos 0 +#define reg_cge_idx2_12_8_len 5 +#define reg_cge_idx2_12_8_lsb 8 +#define xd_p_reg_cge_idx3_7_0 0xA286 +#define reg_cge_idx3_7_0_pos 0 +#define reg_cge_idx3_7_0_len 8 +#define reg_cge_idx3_7_0_lsb 0 +#define xd_p_reg_cge_idx3_12_8 0xA287 +#define reg_cge_idx3_12_8_pos 0 +#define reg_cge_idx3_12_8_len 5 +#define reg_cge_idx3_12_8_lsb 8 +#define xd_p_reg_cge_idx4_7_0 0xA288 +#define reg_cge_idx4_7_0_pos 0 +#define reg_cge_idx4_7_0_len 8 +#define reg_cge_idx4_7_0_lsb 0 +#define xd_p_reg_cge_idx4_12_8 0xA289 +#define reg_cge_idx4_12_8_pos 0 +#define reg_cge_idx4_12_8_len 5 +#define reg_cge_idx4_12_8_lsb 8 +#define xd_p_reg_cge_idx5_7_0 0xA28A +#define reg_cge_idx5_7_0_pos 0 +#define reg_cge_idx5_7_0_len 8 +#define reg_cge_idx5_7_0_lsb 0 +#define xd_p_reg_cge_idx5_12_8 0xA28B +#define reg_cge_idx5_12_8_pos 0 +#define reg_cge_idx5_12_8_len 5 +#define reg_cge_idx5_12_8_lsb 8 +#define xd_p_reg_cge_idx6_7_0 0xA28C +#define reg_cge_idx6_7_0_pos 0 +#define reg_cge_idx6_7_0_len 8 +#define reg_cge_idx6_7_0_lsb 0 +#define xd_p_reg_cge_idx6_12_8 0xA28D +#define reg_cge_idx6_12_8_pos 0 +#define reg_cge_idx6_12_8_len 5 +#define reg_cge_idx6_12_8_lsb 8 +#define xd_p_reg_cge_idx7_7_0 0xA28E +#define reg_cge_idx7_7_0_pos 0 +#define reg_cge_idx7_7_0_len 8 +#define reg_cge_idx7_7_0_lsb 0 +#define xd_p_reg_cge_idx7_12_8 0xA28F +#define reg_cge_idx7_12_8_pos 0 +#define reg_cge_idx7_12_8_len 5 +#define reg_cge_idx7_12_8_lsb 8 +#define xd_p_reg_cge_idx8_7_0 0xA290 +#define reg_cge_idx8_7_0_pos 0 +#define reg_cge_idx8_7_0_len 8 +#define reg_cge_idx8_7_0_lsb 0 +#define xd_p_reg_cge_idx8_12_8 0xA291 +#define reg_cge_idx8_12_8_pos 0 +#define reg_cge_idx8_12_8_len 5 +#define reg_cge_idx8_12_8_lsb 8 +#define xd_p_reg_cge_idx9_7_0 0xA292 +#define reg_cge_idx9_7_0_pos 0 +#define reg_cge_idx9_7_0_len 8 +#define reg_cge_idx9_7_0_lsb 0 +#define xd_p_reg_cge_idx9_12_8 0xA293 +#define reg_cge_idx9_12_8_pos 0 +#define reg_cge_idx9_12_8_len 5 +#define reg_cge_idx9_12_8_lsb 8 +#define xd_p_reg_cge_idx10_7_0 0xA294 +#define reg_cge_idx10_7_0_pos 0 +#define reg_cge_idx10_7_0_len 8 +#define reg_cge_idx10_7_0_lsb 0 +#define xd_p_reg_cge_idx10_12_8 0xA295 +#define reg_cge_idx10_12_8_pos 0 +#define reg_cge_idx10_12_8_len 5 +#define reg_cge_idx10_12_8_lsb 8 +#define xd_p_reg_cge_idx11_7_0 0xA296 +#define reg_cge_idx11_7_0_pos 0 +#define reg_cge_idx11_7_0_len 8 +#define reg_cge_idx11_7_0_lsb 0 +#define xd_p_reg_cge_idx11_12_8 0xA297 +#define reg_cge_idx11_12_8_pos 0 +#define reg_cge_idx11_12_8_len 5 +#define reg_cge_idx11_12_8_lsb 8 +#define xd_p_reg_cge_idx12_7_0 0xA298 +#define reg_cge_idx12_7_0_pos 0 +#define reg_cge_idx12_7_0_len 8 +#define reg_cge_idx12_7_0_lsb 0 +#define xd_p_reg_cge_idx12_12_8 0xA299 +#define reg_cge_idx12_12_8_pos 0 +#define reg_cge_idx12_12_8_len 5 +#define reg_cge_idx12_12_8_lsb 8 +#define xd_p_reg_cge_idx13_7_0 0xA29A +#define reg_cge_idx13_7_0_pos 0 +#define reg_cge_idx13_7_0_len 8 +#define reg_cge_idx13_7_0_lsb 0 +#define xd_p_reg_cge_idx13_12_8 0xA29B +#define reg_cge_idx13_12_8_pos 0 +#define reg_cge_idx13_12_8_len 5 +#define reg_cge_idx13_12_8_lsb 8 +#define xd_p_reg_cge_idx14_7_0 0xA29C +#define reg_cge_idx14_7_0_pos 0 +#define reg_cge_idx14_7_0_len 8 +#define reg_cge_idx14_7_0_lsb 0 +#define xd_p_reg_cge_idx14_12_8 0xA29D +#define reg_cge_idx14_12_8_pos 0 +#define reg_cge_idx14_12_8_len 5 +#define reg_cge_idx14_12_8_lsb 8 +#define xd_p_reg_cge_idx15_7_0 0xA29E +#define reg_cge_idx15_7_0_pos 0 +#define reg_cge_idx15_7_0_len 8 +#define reg_cge_idx15_7_0_lsb 0 +#define xd_p_reg_cge_idx15_12_8 0xA29F +#define reg_cge_idx15_12_8_pos 0 +#define reg_cge_idx15_12_8_len 5 +#define reg_cge_idx15_12_8_lsb 8 +#define xd_r_reg_fft_crc 0xA2A8 +#define reg_fft_crc_pos 0 +#define reg_fft_crc_len 8 +#define reg_fft_crc_lsb 0 +#define xd_p_fd_fft_shift_max 0xA2A9 +#define fd_fft_shift_max_pos 0 +#define fd_fft_shift_max_len 4 +#define fd_fft_shift_max_lsb 0 +#define xd_r_fd_fft_shift 0xA2A9 +#define fd_fft_shift_pos 4 +#define fd_fft_shift_len 4 +#define fd_fft_shift_lsb 0 +#define xd_r_fd_fft_frame_num 0xA2AA +#define fd_fft_frame_num_pos 0 +#define fd_fft_frame_num_len 2 +#define fd_fft_frame_num_lsb 0 +#define xd_r_fd_fft_symbol_count 0xA2AB +#define fd_fft_symbol_count_pos 0 +#define fd_fft_symbol_count_len 7 +#define fd_fft_symbol_count_lsb 0 +#define xd_r_reg_fft_idx_max_7_0 0xA2AC +#define reg_fft_idx_max_7_0_pos 0 +#define reg_fft_idx_max_7_0_len 8 +#define reg_fft_idx_max_7_0_lsb 0 +#define xd_r_reg_fft_idx_max_12_8 0xA2AD +#define reg_fft_idx_max_12_8_pos 0 +#define reg_fft_idx_max_12_8_len 5 +#define reg_fft_idx_max_12_8_lsb 8 +#define xd_p_reg_cge_program 0xA2AE +#define reg_cge_program_pos 0 +#define reg_cge_program_len 1 +#define reg_cge_program_lsb 0 +#define xd_p_reg_cge_fixed 0xA2AE +#define reg_cge_fixed_pos 1 +#define reg_cge_fixed_len 1 +#define reg_cge_fixed_lsb 0 +#define xd_p_reg_fft_rotate_en 0xA2AE +#define reg_fft_rotate_en_pos 2 +#define reg_fft_rotate_en_len 1 +#define reg_fft_rotate_en_lsb 0 +#define xd_p_reg_fft_rotate_base_4_0 0xA2AE +#define reg_fft_rotate_base_4_0_pos 3 +#define reg_fft_rotate_base_4_0_len 5 +#define reg_fft_rotate_base_4_0_lsb 0 +#define xd_p_reg_fft_rotate_base_12_5 0xA2AF +#define reg_fft_rotate_base_12_5_pos 0 +#define reg_fft_rotate_base_12_5_len 8 +#define reg_fft_rotate_base_12_5_lsb 5 +#define xd_p_reg_gp_trigger_fd 0xA2B8 +#define reg_gp_trigger_fd_pos 0 +#define reg_gp_trigger_fd_len 1 +#define reg_gp_trigger_fd_lsb 0 +#define xd_p_reg_trigger_sel_fd 0xA2B8 +#define reg_trigger_sel_fd_pos 1 +#define reg_trigger_sel_fd_len 2 +#define reg_trigger_sel_fd_lsb 0 +#define xd_p_reg_trigger_module_sel_fd 0xA2B9 +#define reg_trigger_module_sel_fd_pos 0 +#define reg_trigger_module_sel_fd_len 6 +#define reg_trigger_module_sel_fd_lsb 0 +#define xd_p_reg_trigger_set_sel_fd 0xA2BA +#define reg_trigger_set_sel_fd_pos 0 +#define reg_trigger_set_sel_fd_len 6 +#define reg_trigger_set_sel_fd_lsb 0 +#define xd_p_reg_fd_noname_7_0 0xA2BC +#define reg_fd_noname_7_0_pos 0 +#define reg_fd_noname_7_0_len 8 +#define reg_fd_noname_7_0_lsb 0 +#define xd_p_reg_fd_noname_15_8 0xA2BD +#define reg_fd_noname_15_8_pos 0 +#define reg_fd_noname_15_8_len 8 +#define reg_fd_noname_15_8_lsb 8 +#define xd_p_reg_fd_noname_23_16 0xA2BE +#define reg_fd_noname_23_16_pos 0 +#define reg_fd_noname_23_16_len 8 +#define reg_fd_noname_23_16_lsb 16 +#define xd_p_reg_fd_noname_31_24 0xA2BF +#define reg_fd_noname_31_24_pos 0 +#define reg_fd_noname_31_24_len 8 +#define reg_fd_noname_31_24_lsb 24 +#define xd_r_fd_fpcc_cp_corr_signn 0xA2C0 +#define fd_fpcc_cp_corr_signn_pos 0 +#define fd_fpcc_cp_corr_signn_len 8 +#define fd_fpcc_cp_corr_signn_lsb 0 +#define xd_p_reg_feq_s1 0xA2C1 +#define reg_feq_s1_pos 0 +#define reg_feq_s1_len 5 +#define reg_feq_s1_lsb 0 +#define xd_p_fd_fpcc_cp_corr_tone_th 0xA2C2 +#define fd_fpcc_cp_corr_tone_th_pos 0 +#define fd_fpcc_cp_corr_tone_th_len 6 +#define fd_fpcc_cp_corr_tone_th_lsb 0 +#define xd_p_fd_fpcc_cp_corr_symbol_log_th 0xA2C3 +#define fd_fpcc_cp_corr_symbol_log_th_pos 0 +#define fd_fpcc_cp_corr_symbol_log_th_len 4 +#define fd_fpcc_cp_corr_symbol_log_th_lsb 0 +#define xd_p_fd_fpcc_cp_corr_int 0xA2C4 +#define fd_fpcc_cp_corr_int_pos 0 +#define fd_fpcc_cp_corr_int_len 1 +#define fd_fpcc_cp_corr_int_lsb 0 +#define xd_p_reg_sfoe_ns_7_0 0xA320 +#define reg_sfoe_ns_7_0_pos 0 +#define reg_sfoe_ns_7_0_len 8 +#define reg_sfoe_ns_7_0_lsb 0 +#define xd_p_reg_sfoe_ns_14_8 0xA321 +#define reg_sfoe_ns_14_8_pos 0 +#define reg_sfoe_ns_14_8_len 7 +#define reg_sfoe_ns_14_8_lsb 8 +#define xd_p_reg_sfoe_c1_7_0 0xA322 +#define reg_sfoe_c1_7_0_pos 0 +#define reg_sfoe_c1_7_0_len 8 +#define reg_sfoe_c1_7_0_lsb 0 +#define xd_p_reg_sfoe_c1_15_8 0xA323 +#define reg_sfoe_c1_15_8_pos 0 +#define reg_sfoe_c1_15_8_len 8 +#define reg_sfoe_c1_15_8_lsb 8 +#define xd_p_reg_sfoe_c1_17_16 0xA324 +#define reg_sfoe_c1_17_16_pos 0 +#define reg_sfoe_c1_17_16_len 2 +#define reg_sfoe_c1_17_16_lsb 16 +#define xd_p_reg_sfoe_c2_7_0 0xA325 +#define reg_sfoe_c2_7_0_pos 0 +#define reg_sfoe_c2_7_0_len 8 +#define reg_sfoe_c2_7_0_lsb 0 +#define xd_p_reg_sfoe_c2_15_8 0xA326 +#define reg_sfoe_c2_15_8_pos 0 +#define reg_sfoe_c2_15_8_len 8 +#define reg_sfoe_c2_15_8_lsb 8 +#define xd_p_reg_sfoe_c2_17_16 0xA327 +#define reg_sfoe_c2_17_16_pos 0 +#define reg_sfoe_c2_17_16_len 2 +#define reg_sfoe_c2_17_16_lsb 16 +#define xd_r_reg_sfoe_out_9_2 0xA328 +#define reg_sfoe_out_9_2_pos 0 +#define reg_sfoe_out_9_2_len 8 +#define reg_sfoe_out_9_2_lsb 0 +#define xd_r_reg_sfoe_out_1_0 0xA329 +#define reg_sfoe_out_1_0_pos 0 +#define reg_sfoe_out_1_0_len 2 +#define reg_sfoe_out_1_0_lsb 0 +#define xd_p_reg_sfoe_lm_counter_th 0xA32A +#define reg_sfoe_lm_counter_th_pos 0 +#define reg_sfoe_lm_counter_th_len 4 +#define reg_sfoe_lm_counter_th_lsb 0 +#define xd_p_reg_sfoe_convg_th 0xA32B +#define reg_sfoe_convg_th_pos 0 +#define reg_sfoe_convg_th_len 8 +#define reg_sfoe_convg_th_lsb 0 +#define xd_p_reg_sfoe_divg_th 0xA32C +#define reg_sfoe_divg_th_pos 0 +#define reg_sfoe_divg_th_len 8 +#define reg_sfoe_divg_th_lsb 0 +#define xd_p_fd_tpsd_en 0xA330 +#define fd_tpsd_en_pos 0 +#define fd_tpsd_en_len 1 +#define fd_tpsd_en_lsb 0 +#define xd_p_fd_tpsd_dis 0xA330 +#define fd_tpsd_dis_pos 1 +#define fd_tpsd_dis_len 1 +#define fd_tpsd_dis_lsb 0 +#define xd_p_fd_tpsd_rst 0xA330 +#define fd_tpsd_rst_pos 2 +#define fd_tpsd_rst_len 1 +#define fd_tpsd_rst_lsb 0 +#define xd_p_fd_tpsd_lock 0xA330 +#define fd_tpsd_lock_pos 3 +#define fd_tpsd_lock_len 1 +#define fd_tpsd_lock_lsb 0 +#define xd_r_fd_tpsd_s19 0xA330 +#define fd_tpsd_s19_pos 4 +#define fd_tpsd_s19_len 1 +#define fd_tpsd_s19_lsb 0 +#define xd_r_fd_tpsd_s17 0xA330 +#define fd_tpsd_s17_pos 5 +#define fd_tpsd_s17_len 1 +#define fd_tpsd_s17_lsb 0 +#define xd_p_fd_sfr_ste_en 0xA331 +#define fd_sfr_ste_en_pos 0 +#define fd_sfr_ste_en_len 1 +#define fd_sfr_ste_en_lsb 0 +#define xd_p_fd_sfr_ste_dis 0xA331 +#define fd_sfr_ste_dis_pos 1 +#define fd_sfr_ste_dis_len 1 +#define fd_sfr_ste_dis_lsb 0 +#define xd_p_fd_sfr_ste_rst 0xA331 +#define fd_sfr_ste_rst_pos 2 +#define fd_sfr_ste_rst_len 1 +#define fd_sfr_ste_rst_lsb 0 +#define xd_p_fd_sfr_ste_mode 0xA331 +#define fd_sfr_ste_mode_pos 3 +#define fd_sfr_ste_mode_len 1 +#define fd_sfr_ste_mode_lsb 0 +#define xd_p_fd_sfr_ste_done 0xA331 +#define fd_sfr_ste_done_pos 4 +#define fd_sfr_ste_done_len 1 +#define fd_sfr_ste_done_lsb 0 +#define xd_p_reg_cfoe_ffoe_en 0xA332 +#define reg_cfoe_ffoe_en_pos 0 +#define reg_cfoe_ffoe_en_len 1 +#define reg_cfoe_ffoe_en_lsb 0 +#define xd_p_reg_cfoe_ffoe_dis 0xA332 +#define reg_cfoe_ffoe_dis_pos 1 +#define reg_cfoe_ffoe_dis_len 1 +#define reg_cfoe_ffoe_dis_lsb 0 +#define xd_p_reg_cfoe_ffoe_rst 0xA332 +#define reg_cfoe_ffoe_rst_pos 2 +#define reg_cfoe_ffoe_rst_len 1 +#define reg_cfoe_ffoe_rst_lsb 0 +#define xd_p_reg_cfoe_ifoe_en 0xA332 +#define reg_cfoe_ifoe_en_pos 3 +#define reg_cfoe_ifoe_en_len 1 +#define reg_cfoe_ifoe_en_lsb 0 +#define xd_p_reg_cfoe_ifoe_dis 0xA332 +#define reg_cfoe_ifoe_dis_pos 4 +#define reg_cfoe_ifoe_dis_len 1 +#define reg_cfoe_ifoe_dis_lsb 0 +#define xd_p_reg_cfoe_ifoe_rst 0xA332 +#define reg_cfoe_ifoe_rst_pos 5 +#define reg_cfoe_ifoe_rst_len 1 +#define reg_cfoe_ifoe_rst_lsb 0 +#define xd_p_reg_cfoe_fot_en 0xA332 +#define reg_cfoe_fot_en_pos 6 +#define reg_cfoe_fot_en_len 1 +#define reg_cfoe_fot_en_lsb 0 +#define xd_p_reg_cfoe_fot_lm_en 0xA332 +#define reg_cfoe_fot_lm_en_pos 7 +#define reg_cfoe_fot_lm_en_len 1 +#define reg_cfoe_fot_lm_en_lsb 0 +#define xd_p_reg_cfoe_fot_rst 0xA333 +#define reg_cfoe_fot_rst_pos 0 +#define reg_cfoe_fot_rst_len 1 +#define reg_cfoe_fot_rst_lsb 0 +#define xd_r_fd_cfoe_ffoe_done 0xA333 +#define fd_cfoe_ffoe_done_pos 1 +#define fd_cfoe_ffoe_done_len 1 +#define fd_cfoe_ffoe_done_lsb 0 +#define xd_p_fd_cfoe_metric_vld 0xA333 +#define fd_cfoe_metric_vld_pos 2 +#define fd_cfoe_metric_vld_len 1 +#define fd_cfoe_metric_vld_lsb 0 +#define xd_p_reg_cfoe_ifod_vld 0xA333 +#define reg_cfoe_ifod_vld_pos 3 +#define reg_cfoe_ifod_vld_len 1 +#define reg_cfoe_ifod_vld_lsb 0 +#define xd_r_fd_cfoe_ifoe_done 0xA333 +#define fd_cfoe_ifoe_done_pos 4 +#define fd_cfoe_ifoe_done_len 1 +#define fd_cfoe_ifoe_done_lsb 0 +#define xd_r_fd_cfoe_fot_valid 0xA333 +#define fd_cfoe_fot_valid_pos 5 +#define fd_cfoe_fot_valid_len 1 +#define fd_cfoe_fot_valid_lsb 0 +#define xd_p_reg_cfoe_divg_int 0xA333 +#define reg_cfoe_divg_int_pos 6 +#define reg_cfoe_divg_int_len 1 +#define reg_cfoe_divg_int_lsb 0 +#define xd_r_reg_cfoe_divg_flag 0xA333 +#define reg_cfoe_divg_flag_pos 7 +#define reg_cfoe_divg_flag_len 1 +#define reg_cfoe_divg_flag_lsb 0 +#define xd_p_reg_sfoe_en 0xA334 +#define reg_sfoe_en_pos 0 +#define reg_sfoe_en_len 1 +#define reg_sfoe_en_lsb 0 +#define xd_p_reg_sfoe_dis 0xA334 +#define reg_sfoe_dis_pos 1 +#define reg_sfoe_dis_len 1 +#define reg_sfoe_dis_lsb 0 +#define xd_p_reg_sfoe_rst 0xA334 +#define reg_sfoe_rst_pos 2 +#define reg_sfoe_rst_len 1 +#define reg_sfoe_rst_lsb 0 +#define xd_p_reg_sfoe_vld_int 0xA334 +#define reg_sfoe_vld_int_pos 3 +#define reg_sfoe_vld_int_len 1 +#define reg_sfoe_vld_int_lsb 0 +#define xd_p_reg_sfoe_lm_en 0xA334 +#define reg_sfoe_lm_en_pos 4 +#define reg_sfoe_lm_en_len 1 +#define reg_sfoe_lm_en_lsb 0 +#define xd_p_reg_sfoe_divg_int 0xA334 +#define reg_sfoe_divg_int_pos 5 +#define reg_sfoe_divg_int_len 1 +#define reg_sfoe_divg_int_lsb 0 +#define xd_r_reg_sfoe_divg_flag 0xA334 +#define reg_sfoe_divg_flag_pos 6 +#define reg_sfoe_divg_flag_len 1 +#define reg_sfoe_divg_flag_lsb 0 +#define xd_p_reg_fft_rst 0xA335 +#define reg_fft_rst_pos 0 +#define reg_fft_rst_len 1 +#define reg_fft_rst_lsb 0 +#define xd_p_reg_fft_fast_beacon 0xA335 +#define reg_fft_fast_beacon_pos 1 +#define reg_fft_fast_beacon_len 1 +#define reg_fft_fast_beacon_lsb 0 +#define xd_p_reg_fft_fast_valid 0xA335 +#define reg_fft_fast_valid_pos 2 +#define reg_fft_fast_valid_len 1 +#define reg_fft_fast_valid_lsb 0 +#define xd_p_reg_fft_mask_en 0xA335 +#define reg_fft_mask_en_pos 3 +#define reg_fft_mask_en_len 1 +#define reg_fft_mask_en_lsb 0 +#define xd_p_reg_fft_crc_en 0xA335 +#define reg_fft_crc_en_pos 4 +#define reg_fft_crc_en_len 1 +#define reg_fft_crc_en_lsb 0 +#define xd_p_reg_finr_en 0xA336 +#define reg_finr_en_pos 0 +#define reg_finr_en_len 1 +#define reg_finr_en_lsb 0 +#define xd_p_fd_fste_en 0xA337 +#define fd_fste_en_pos 1 +#define fd_fste_en_len 1 +#define fd_fste_en_lsb 0 +#define xd_p_fd_sqi_tps_level_shift 0xA338 +#define fd_sqi_tps_level_shift_pos 0 +#define fd_sqi_tps_level_shift_len 8 +#define fd_sqi_tps_level_shift_lsb 0 +#define xd_p_fd_pilot_ma_len 0xA339 +#define fd_pilot_ma_len_pos 0 +#define fd_pilot_ma_len_len 6 +#define fd_pilot_ma_len_lsb 0 +#define xd_p_fd_tps_ma_len 0xA33A +#define fd_tps_ma_len_pos 0 +#define fd_tps_ma_len_len 6 +#define fd_tps_ma_len_lsb 0 +#define xd_p_fd_sqi_s3 0xA33B +#define fd_sqi_s3_pos 0 +#define fd_sqi_s3_len 8 +#define fd_sqi_s3_lsb 0 +#define xd_p_fd_sqi_dummy_reg_0 0xA33C +#define fd_sqi_dummy_reg_0_pos 0 +#define fd_sqi_dummy_reg_0_len 1 +#define fd_sqi_dummy_reg_0_lsb 0 +#define xd_p_fd_sqi_debug_sel 0xA33C +#define fd_sqi_debug_sel_pos 1 +#define fd_sqi_debug_sel_len 2 +#define fd_sqi_debug_sel_lsb 0 +#define xd_p_fd_sqi_s2 0xA33C +#define fd_sqi_s2_pos 3 +#define fd_sqi_s2_len 5 +#define fd_sqi_s2_lsb 0 +#define xd_p_fd_sqi_dummy_reg_1 0xA33D +#define fd_sqi_dummy_reg_1_pos 0 +#define fd_sqi_dummy_reg_1_len 1 +#define fd_sqi_dummy_reg_1_lsb 0 +#define xd_p_fd_inr_ignore 0xA33D +#define fd_inr_ignore_pos 1 +#define fd_inr_ignore_len 1 +#define fd_inr_ignore_lsb 0 +#define xd_p_fd_pilot_ignore 0xA33D +#define fd_pilot_ignore_pos 2 +#define fd_pilot_ignore_len 1 +#define fd_pilot_ignore_lsb 0 +#define xd_p_fd_etps_ignore 0xA33D +#define fd_etps_ignore_pos 3 +#define fd_etps_ignore_len 1 +#define fd_etps_ignore_lsb 0 +#define xd_p_fd_sqi_s1 0xA33D +#define fd_sqi_s1_pos 4 +#define fd_sqi_s1_len 4 +#define fd_sqi_s1_lsb 0 +#define xd_p_reg_fste_ehw_7_0 0xA33E +#define reg_fste_ehw_7_0_pos 0 +#define reg_fste_ehw_7_0_len 8 +#define reg_fste_ehw_7_0_lsb 0 +#define xd_p_reg_fste_ehw_9_8 0xA33F +#define reg_fste_ehw_9_8_pos 0 +#define reg_fste_ehw_9_8_len 2 +#define reg_fste_ehw_9_8_lsb 8 +#define xd_p_reg_fste_i_adj_vld 0xA33F +#define reg_fste_i_adj_vld_pos 2 +#define reg_fste_i_adj_vld_len 1 +#define reg_fste_i_adj_vld_lsb 0 +#define xd_p_reg_fste_phase_ini_7_0 0xA340 +#define reg_fste_phase_ini_7_0_pos 0 +#define reg_fste_phase_ini_7_0_len 8 +#define reg_fste_phase_ini_7_0_lsb 0 +#define xd_p_reg_fste_phase_ini_11_8 0xA341 +#define reg_fste_phase_ini_11_8_pos 0 +#define reg_fste_phase_ini_11_8_len 4 +#define reg_fste_phase_ini_11_8_lsb 8 +#define xd_p_reg_fste_phase_inc_3_0 0xA341 +#define reg_fste_phase_inc_3_0_pos 4 +#define reg_fste_phase_inc_3_0_len 4 +#define reg_fste_phase_inc_3_0_lsb 0 +#define xd_p_reg_fste_phase_inc_11_4 0xA342 +#define reg_fste_phase_inc_11_4_pos 0 +#define reg_fste_phase_inc_11_4_len 8 +#define reg_fste_phase_inc_11_4_lsb 4 +#define xd_p_reg_fste_acum_cost_cnt_max 0xA343 +#define reg_fste_acum_cost_cnt_max_pos 0 +#define reg_fste_acum_cost_cnt_max_len 4 +#define reg_fste_acum_cost_cnt_max_lsb 0 +#define xd_p_reg_fste_step_size_std 0xA343 +#define reg_fste_step_size_std_pos 4 +#define reg_fste_step_size_std_len 4 +#define reg_fste_step_size_std_lsb 0 +#define xd_p_reg_fste_step_size_max 0xA344 +#define reg_fste_step_size_max_pos 0 +#define reg_fste_step_size_max_len 4 +#define reg_fste_step_size_max_lsb 0 +#define xd_p_reg_fste_step_size_min 0xA344 +#define reg_fste_step_size_min_pos 4 +#define reg_fste_step_size_min_len 4 +#define reg_fste_step_size_min_lsb 0 +#define xd_p_reg_fste_frac_step_size_7_0 0xA345 +#define reg_fste_frac_step_size_7_0_pos 0 +#define reg_fste_frac_step_size_7_0_len 8 +#define reg_fste_frac_step_size_7_0_lsb 0 +#define xd_p_reg_fste_frac_step_size_15_8 0xA346 +#define reg_fste_frac_step_size_15_8_pos 0 +#define reg_fste_frac_step_size_15_8_len 8 +#define reg_fste_frac_step_size_15_8_lsb 8 +#define xd_p_reg_fste_frac_step_size_19_16 0xA347 +#define reg_fste_frac_step_size_19_16_pos 0 +#define reg_fste_frac_step_size_19_16_len 4 +#define reg_fste_frac_step_size_19_16_lsb 16 +#define xd_p_reg_fste_rpd_dir_cnt_max 0xA347 +#define reg_fste_rpd_dir_cnt_max_pos 4 +#define reg_fste_rpd_dir_cnt_max_len 4 +#define reg_fste_rpd_dir_cnt_max_lsb 0 +#define xd_p_reg_fste_ehs 0xA348 +#define reg_fste_ehs_pos 0 +#define reg_fste_ehs_len 4 +#define reg_fste_ehs_lsb 0 +#define xd_p_reg_fste_frac_cost_cnt_max_3_0 0xA348 +#define reg_fste_frac_cost_cnt_max_3_0_pos 4 +#define reg_fste_frac_cost_cnt_max_3_0_len 4 +#define reg_fste_frac_cost_cnt_max_3_0_lsb 0 +#define xd_p_reg_fste_frac_cost_cnt_max_9_4 0xA349 +#define reg_fste_frac_cost_cnt_max_9_4_pos 0 +#define reg_fste_frac_cost_cnt_max_9_4_len 6 +#define reg_fste_frac_cost_cnt_max_9_4_lsb 4 +#define xd_p_reg_fste_w0_7_0 0xA34A +#define reg_fste_w0_7_0_pos 0 +#define reg_fste_w0_7_0_len 8 +#define reg_fste_w0_7_0_lsb 0 +#define xd_p_reg_fste_w0_11_8 0xA34B +#define reg_fste_w0_11_8_pos 0 +#define reg_fste_w0_11_8_len 4 +#define reg_fste_w0_11_8_lsb 8 +#define xd_p_reg_fste_w1_3_0 0xA34B +#define reg_fste_w1_3_0_pos 4 +#define reg_fste_w1_3_0_len 4 +#define reg_fste_w1_3_0_lsb 0 +#define xd_p_reg_fste_w1_11_4 0xA34C +#define reg_fste_w1_11_4_pos 0 +#define reg_fste_w1_11_4_len 8 +#define reg_fste_w1_11_4_lsb 4 +#define xd_p_reg_fste_w2_7_0 0xA34D +#define reg_fste_w2_7_0_pos 0 +#define reg_fste_w2_7_0_len 8 +#define reg_fste_w2_7_0_lsb 0 +#define xd_p_reg_fste_w2_11_8 0xA34E +#define reg_fste_w2_11_8_pos 0 +#define reg_fste_w2_11_8_len 4 +#define reg_fste_w2_11_8_lsb 8 +#define xd_p_reg_fste_w3_3_0 0xA34E +#define reg_fste_w3_3_0_pos 4 +#define reg_fste_w3_3_0_len 4 +#define reg_fste_w3_3_0_lsb 0 +#define xd_p_reg_fste_w3_11_4 0xA34F +#define reg_fste_w3_11_4_pos 0 +#define reg_fste_w3_11_4_len 8 +#define reg_fste_w3_11_4_lsb 4 +#define xd_p_reg_fste_w4_7_0 0xA350 +#define reg_fste_w4_7_0_pos 0 +#define reg_fste_w4_7_0_len 8 +#define reg_fste_w4_7_0_lsb 0 +#define xd_p_reg_fste_w4_11_8 0xA351 +#define reg_fste_w4_11_8_pos 0 +#define reg_fste_w4_11_8_len 4 +#define reg_fste_w4_11_8_lsb 8 +#define xd_p_reg_fste_w5_3_0 0xA351 +#define reg_fste_w5_3_0_pos 4 +#define reg_fste_w5_3_0_len 4 +#define reg_fste_w5_3_0_lsb 0 +#define xd_p_reg_fste_w5_11_4 0xA352 +#define reg_fste_w5_11_4_pos 0 +#define reg_fste_w5_11_4_len 8 +#define reg_fste_w5_11_4_lsb 4 +#define xd_p_reg_fste_w6_7_0 0xA353 +#define reg_fste_w6_7_0_pos 0 +#define reg_fste_w6_7_0_len 8 +#define reg_fste_w6_7_0_lsb 0 +#define xd_p_reg_fste_w6_11_8 0xA354 +#define reg_fste_w6_11_8_pos 0 +#define reg_fste_w6_11_8_len 4 +#define reg_fste_w6_11_8_lsb 8 +#define xd_p_reg_fste_w7_3_0 0xA354 +#define reg_fste_w7_3_0_pos 4 +#define reg_fste_w7_3_0_len 4 +#define reg_fste_w7_3_0_lsb 0 +#define xd_p_reg_fste_w7_11_4 0xA355 +#define reg_fste_w7_11_4_pos 0 +#define reg_fste_w7_11_4_len 8 +#define reg_fste_w7_11_4_lsb 4 +#define xd_p_reg_fste_w8_7_0 0xA356 +#define reg_fste_w8_7_0_pos 0 +#define reg_fste_w8_7_0_len 8 +#define reg_fste_w8_7_0_lsb 0 +#define xd_p_reg_fste_w8_11_8 0xA357 +#define reg_fste_w8_11_8_pos 0 +#define reg_fste_w8_11_8_len 4 +#define reg_fste_w8_11_8_lsb 8 +#define xd_p_reg_fste_w9_3_0 0xA357 +#define reg_fste_w9_3_0_pos 4 +#define reg_fste_w9_3_0_len 4 +#define reg_fste_w9_3_0_lsb 0 +#define xd_p_reg_fste_w9_11_4 0xA358 +#define reg_fste_w9_11_4_pos 0 +#define reg_fste_w9_11_4_len 8 +#define reg_fste_w9_11_4_lsb 4 +#define xd_p_reg_fste_wa_7_0 0xA359 +#define reg_fste_wa_7_0_pos 0 +#define reg_fste_wa_7_0_len 8 +#define reg_fste_wa_7_0_lsb 0 +#define xd_p_reg_fste_wa_11_8 0xA35A +#define reg_fste_wa_11_8_pos 0 +#define reg_fste_wa_11_8_len 4 +#define reg_fste_wa_11_8_lsb 8 +#define xd_p_reg_fste_wb_3_0 0xA35A +#define reg_fste_wb_3_0_pos 4 +#define reg_fste_wb_3_0_len 4 +#define reg_fste_wb_3_0_lsb 0 +#define xd_p_reg_fste_wb_11_4 0xA35B +#define reg_fste_wb_11_4_pos 0 +#define reg_fste_wb_11_4_len 8 +#define reg_fste_wb_11_4_lsb 4 +#define xd_r_fd_fste_i_adj 0xA35C +#define fd_fste_i_adj_pos 0 +#define fd_fste_i_adj_len 5 +#define fd_fste_i_adj_lsb 0 +#define xd_r_fd_fste_f_adj_7_0 0xA35D +#define fd_fste_f_adj_7_0_pos 0 +#define fd_fste_f_adj_7_0_len 8 +#define fd_fste_f_adj_7_0_lsb 0 +#define xd_r_fd_fste_f_adj_15_8 0xA35E +#define fd_fste_f_adj_15_8_pos 0 +#define fd_fste_f_adj_15_8_len 8 +#define fd_fste_f_adj_15_8_lsb 8 +#define xd_r_fd_fste_f_adj_19_16 0xA35F +#define fd_fste_f_adj_19_16_pos 0 +#define fd_fste_f_adj_19_16_len 4 +#define fd_fste_f_adj_19_16_lsb 16 +#define xd_p_reg_feq_Leak_Bypass 0xA366 +#define reg_feq_Leak_Bypass_pos 0 +#define reg_feq_Leak_Bypass_len 1 +#define reg_feq_Leak_Bypass_lsb 0 +#define xd_p_reg_feq_Leak_Mneg1 0xA366 +#define reg_feq_Leak_Mneg1_pos 1 +#define reg_feq_Leak_Mneg1_len 3 +#define reg_feq_Leak_Mneg1_lsb 0 +#define xd_p_reg_feq_Leak_B_ShiftQ 0xA366 +#define reg_feq_Leak_B_ShiftQ_pos 4 +#define reg_feq_Leak_B_ShiftQ_len 4 +#define reg_feq_Leak_B_ShiftQ_lsb 0 +#define xd_p_reg_feq_Leak_B_Float0 0xA367 +#define reg_feq_Leak_B_Float0_pos 0 +#define reg_feq_Leak_B_Float0_len 8 +#define reg_feq_Leak_B_Float0_lsb 0 +#define xd_p_reg_feq_Leak_B_Float1 0xA368 +#define reg_feq_Leak_B_Float1_pos 0 +#define reg_feq_Leak_B_Float1_len 8 +#define reg_feq_Leak_B_Float1_lsb 0 +#define xd_p_reg_feq_Leak_B_Float2 0xA369 +#define reg_feq_Leak_B_Float2_pos 0 +#define reg_feq_Leak_B_Float2_len 8 +#define reg_feq_Leak_B_Float2_lsb 0 +#define xd_p_reg_feq_Leak_B_Float3 0xA36A +#define reg_feq_Leak_B_Float3_pos 0 +#define reg_feq_Leak_B_Float3_len 8 +#define reg_feq_Leak_B_Float3_lsb 0 +#define xd_p_reg_feq_Leak_B_Float4 0xA36B +#define reg_feq_Leak_B_Float4_pos 0 +#define reg_feq_Leak_B_Float4_len 8 +#define reg_feq_Leak_B_Float4_lsb 0 +#define xd_p_reg_feq_Leak_B_Float5 0xA36C +#define reg_feq_Leak_B_Float5_pos 0 +#define reg_feq_Leak_B_Float5_len 8 +#define reg_feq_Leak_B_Float5_lsb 0 +#define xd_p_reg_feq_Leak_B_Float6 0xA36D +#define reg_feq_Leak_B_Float6_pos 0 +#define reg_feq_Leak_B_Float6_len 8 +#define reg_feq_Leak_B_Float6_lsb 0 +#define xd_p_reg_feq_Leak_B_Float7 0xA36E +#define reg_feq_Leak_B_Float7_pos 0 +#define reg_feq_Leak_B_Float7_len 8 +#define reg_feq_Leak_B_Float7_lsb 0 +#define xd_r_reg_feq_data_h2_7_0 0xA36F +#define reg_feq_data_h2_7_0_pos 0 +#define reg_feq_data_h2_7_0_len 8 +#define reg_feq_data_h2_7_0_lsb 0 +#define xd_r_reg_feq_data_h2_9_8 0xA370 +#define reg_feq_data_h2_9_8_pos 0 +#define reg_feq_data_h2_9_8_len 2 +#define reg_feq_data_h2_9_8_lsb 8 +#define xd_p_reg_feq_leak_use_slice_tps 0xA371 +#define reg_feq_leak_use_slice_tps_pos 0 +#define reg_feq_leak_use_slice_tps_len 1 +#define reg_feq_leak_use_slice_tps_lsb 0 +#define xd_p_reg_feq_read_update 0xA371 +#define reg_feq_read_update_pos 1 +#define reg_feq_read_update_len 1 +#define reg_feq_read_update_lsb 0 +#define xd_p_reg_feq_data_vld 0xA371 +#define reg_feq_data_vld_pos 2 +#define reg_feq_data_vld_len 1 +#define reg_feq_data_vld_lsb 0 +#define xd_p_reg_feq_tone_idx_4_0 0xA371 +#define reg_feq_tone_idx_4_0_pos 3 +#define reg_feq_tone_idx_4_0_len 5 +#define reg_feq_tone_idx_4_0_lsb 0 +#define xd_p_reg_feq_tone_idx_12_5 0xA372 +#define reg_feq_tone_idx_12_5_pos 0 +#define reg_feq_tone_idx_12_5_len 8 +#define reg_feq_tone_idx_12_5_lsb 5 +#define xd_r_reg_feq_data_re_7_0 0xA373 +#define reg_feq_data_re_7_0_pos 0 +#define reg_feq_data_re_7_0_len 8 +#define reg_feq_data_re_7_0_lsb 0 +#define xd_r_reg_feq_data_re_10_8 0xA374 +#define reg_feq_data_re_10_8_pos 0 +#define reg_feq_data_re_10_8_len 3 +#define reg_feq_data_re_10_8_lsb 8 +#define xd_r_reg_feq_data_im_7_0 0xA375 +#define reg_feq_data_im_7_0_pos 0 +#define reg_feq_data_im_7_0_len 8 +#define reg_feq_data_im_7_0_lsb 0 +#define xd_r_reg_feq_data_im_10_8 0xA376 +#define reg_feq_data_im_10_8_pos 0 +#define reg_feq_data_im_10_8_len 3 +#define reg_feq_data_im_10_8_lsb 8 +#define xd_r_reg_feq_y_re 0xA377 +#define reg_feq_y_re_pos 0 +#define reg_feq_y_re_len 8 +#define reg_feq_y_re_lsb 0 +#define xd_r_reg_feq_y_im 0xA378 +#define reg_feq_y_im_pos 0 +#define reg_feq_y_im_len 8 +#define reg_feq_y_im_lsb 0 +#define xd_r_reg_feq_h_re_7_0 0xA379 +#define reg_feq_h_re_7_0_pos 0 +#define reg_feq_h_re_7_0_len 8 +#define reg_feq_h_re_7_0_lsb 0 +#define xd_r_reg_feq_h_re_8 0xA37A +#define reg_feq_h_re_8_pos 0 +#define reg_feq_h_re_8_len 1 +#define reg_feq_h_re_8_lsb 0 +#define xd_r_reg_feq_h_im_7_0 0xA37B +#define reg_feq_h_im_7_0_pos 0 +#define reg_feq_h_im_7_0_len 8 +#define reg_feq_h_im_7_0_lsb 0 +#define xd_r_reg_feq_h_im_8 0xA37C +#define reg_feq_h_im_8_pos 0 +#define reg_feq_h_im_8_len 1 +#define reg_feq_h_im_8_lsb 0 +#define xd_p_fec_super_frm_unit_7_0 0xA380 +#define fec_super_frm_unit_7_0_pos 0 +#define fec_super_frm_unit_7_0_len 8 +#define fec_super_frm_unit_7_0_lsb 0 +#define xd_p_fec_super_frm_unit_15_8 0xA381 +#define fec_super_frm_unit_15_8_pos 0 +#define fec_super_frm_unit_15_8_len 8 +#define fec_super_frm_unit_15_8_lsb 8 +#define xd_r_fec_vtb_err_bit_cnt_7_0 0xA382 +#define fec_vtb_err_bit_cnt_7_0_pos 0 +#define fec_vtb_err_bit_cnt_7_0_len 8 +#define fec_vtb_err_bit_cnt_7_0_lsb 0 +#define xd_r_fec_vtb_err_bit_cnt_15_8 0xA383 +#define fec_vtb_err_bit_cnt_15_8_pos 0 +#define fec_vtb_err_bit_cnt_15_8_len 8 +#define fec_vtb_err_bit_cnt_15_8_lsb 8 +#define xd_r_fec_vtb_err_bit_cnt_23_16 0xA384 +#define fec_vtb_err_bit_cnt_23_16_pos 0 +#define fec_vtb_err_bit_cnt_23_16_len 8 +#define fec_vtb_err_bit_cnt_23_16_lsb 16 +#define xd_p_fec_rsd_packet_unit_7_0 0xA385 +#define fec_rsd_packet_unit_7_0_pos 0 +#define fec_rsd_packet_unit_7_0_len 8 +#define fec_rsd_packet_unit_7_0_lsb 0 +#define xd_p_fec_rsd_packet_unit_15_8 0xA386 +#define fec_rsd_packet_unit_15_8_pos 0 +#define fec_rsd_packet_unit_15_8_len 8 +#define fec_rsd_packet_unit_15_8_lsb 8 +#define xd_r_fec_rsd_bit_err_cnt_7_0 0xA387 +#define fec_rsd_bit_err_cnt_7_0_pos 0 +#define fec_rsd_bit_err_cnt_7_0_len 8 +#define fec_rsd_bit_err_cnt_7_0_lsb 0 +#define xd_r_fec_rsd_bit_err_cnt_15_8 0xA388 +#define fec_rsd_bit_err_cnt_15_8_pos 0 +#define fec_rsd_bit_err_cnt_15_8_len 8 +#define fec_rsd_bit_err_cnt_15_8_lsb 8 +#define xd_r_fec_rsd_bit_err_cnt_23_16 0xA389 +#define fec_rsd_bit_err_cnt_23_16_pos 0 +#define fec_rsd_bit_err_cnt_23_16_len 8 +#define fec_rsd_bit_err_cnt_23_16_lsb 16 +#define xd_r_fec_rsd_abort_packet_cnt_7_0 0xA38A +#define fec_rsd_abort_packet_cnt_7_0_pos 0 +#define fec_rsd_abort_packet_cnt_7_0_len 8 +#define fec_rsd_abort_packet_cnt_7_0_lsb 0 +#define xd_r_fec_rsd_abort_packet_cnt_15_8 0xA38B +#define fec_rsd_abort_packet_cnt_15_8_pos 0 +#define fec_rsd_abort_packet_cnt_15_8_len 8 +#define fec_rsd_abort_packet_cnt_15_8_lsb 8 +#define xd_p_fec_RSD_PKT_NUM_PER_UNIT_7_0 0xA38C +#define fec_RSD_PKT_NUM_PER_UNIT_7_0_pos 0 +#define fec_RSD_PKT_NUM_PER_UNIT_7_0_len 8 +#define fec_RSD_PKT_NUM_PER_UNIT_7_0_lsb 0 +#define xd_p_fec_RSD_PKT_NUM_PER_UNIT_15_8 0xA38D +#define fec_RSD_PKT_NUM_PER_UNIT_15_8_pos 0 +#define fec_RSD_PKT_NUM_PER_UNIT_15_8_len 8 +#define fec_RSD_PKT_NUM_PER_UNIT_15_8_lsb 8 +#define xd_p_fec_RS_TH_1_7_0 0xA38E +#define fec_RS_TH_1_7_0_pos 0 +#define fec_RS_TH_1_7_0_len 8 +#define fec_RS_TH_1_7_0_lsb 0 +#define xd_p_fec_RS_TH_1_15_8 0xA38F +#define fec_RS_TH_1_15_8_pos 0 +#define fec_RS_TH_1_15_8_len 8 +#define fec_RS_TH_1_15_8_lsb 8 +#define xd_p_fec_RS_TH_2 0xA390 +#define fec_RS_TH_2_pos 0 +#define fec_RS_TH_2_len 8 +#define fec_RS_TH_2_lsb 0 +#define xd_p_fec_mon_en 0xA391 +#define fec_mon_en_pos 0 +#define fec_mon_en_len 1 +#define fec_mon_en_lsb 0 +#define xd_p_reg_b8to47 0xA391 +#define reg_b8to47_pos 1 +#define reg_b8to47_len 1 +#define reg_b8to47_lsb 0 +#define xd_p_reg_rsd_sync_rep 0xA391 +#define reg_rsd_sync_rep_pos 2 +#define reg_rsd_sync_rep_len 1 +#define reg_rsd_sync_rep_lsb 0 +#define xd_p_fec_rsd_retrain_rst 0xA391 +#define fec_rsd_retrain_rst_pos 3 +#define fec_rsd_retrain_rst_len 1 +#define fec_rsd_retrain_rst_lsb 0 +#define xd_r_fec_rsd_ber_rdy 0xA391 +#define fec_rsd_ber_rdy_pos 4 +#define fec_rsd_ber_rdy_len 1 +#define fec_rsd_ber_rdy_lsb 0 +#define xd_p_fec_rsd_ber_rst 0xA391 +#define fec_rsd_ber_rst_pos 5 +#define fec_rsd_ber_rst_len 1 +#define fec_rsd_ber_rst_lsb 0 +#define xd_r_fec_vtb_ber_rdy 0xA391 +#define fec_vtb_ber_rdy_pos 6 +#define fec_vtb_ber_rdy_len 1 +#define fec_vtb_ber_rdy_lsb 0 +#define xd_p_fec_vtb_ber_rst 0xA391 +#define fec_vtb_ber_rst_pos 7 +#define fec_vtb_ber_rst_len 1 +#define fec_vtb_ber_rst_lsb 0 +#define xd_p_reg_vtb_clk40en 0xA392 +#define reg_vtb_clk40en_pos 0 +#define reg_vtb_clk40en_len 1 +#define reg_vtb_clk40en_lsb 0 +#define xd_p_fec_vtb_rsd_mon_en 0xA392 +#define fec_vtb_rsd_mon_en_pos 1 +#define fec_vtb_rsd_mon_en_len 1 +#define fec_vtb_rsd_mon_en_lsb 0 +#define xd_p_reg_fec_data_en 0xA392 +#define reg_fec_data_en_pos 2 +#define reg_fec_data_en_len 1 +#define reg_fec_data_en_lsb 0 +#define xd_p_fec_dummy_reg_2 0xA392 +#define fec_dummy_reg_2_pos 3 +#define fec_dummy_reg_2_len 3 +#define fec_dummy_reg_2_lsb 0 +#define xd_p_reg_sync_chk 0xA392 +#define reg_sync_chk_pos 6 +#define reg_sync_chk_len 1 +#define reg_sync_chk_lsb 0 +#define xd_p_fec_rsd_bypass 0xA392 +#define fec_rsd_bypass_pos 7 +#define fec_rsd_bypass_len 1 +#define fec_rsd_bypass_lsb 0 +#define xd_p_fec_sw_rst 0xA393 +#define fec_sw_rst_pos 0 +#define fec_sw_rst_len 1 +#define fec_sw_rst_lsb 0 +#define xd_r_fec_vtb_pm_crc 0xA394 +#define fec_vtb_pm_crc_pos 0 +#define fec_vtb_pm_crc_len 8 +#define fec_vtb_pm_crc_lsb 0 +#define xd_r_fec_vtb_tb_7_crc 0xA395 +#define fec_vtb_tb_7_crc_pos 0 +#define fec_vtb_tb_7_crc_len 8 +#define fec_vtb_tb_7_crc_lsb 0 +#define xd_r_fec_vtb_tb_6_crc 0xA396 +#define fec_vtb_tb_6_crc_pos 0 +#define fec_vtb_tb_6_crc_len 8 +#define fec_vtb_tb_6_crc_lsb 0 +#define xd_r_fec_vtb_tb_5_crc 0xA397 +#define fec_vtb_tb_5_crc_pos 0 +#define fec_vtb_tb_5_crc_len 8 +#define fec_vtb_tb_5_crc_lsb 0 +#define xd_r_fec_vtb_tb_4_crc 0xA398 +#define fec_vtb_tb_4_crc_pos 0 +#define fec_vtb_tb_4_crc_len 8 +#define fec_vtb_tb_4_crc_lsb 0 +#define xd_r_fec_vtb_tb_3_crc 0xA399 +#define fec_vtb_tb_3_crc_pos 0 +#define fec_vtb_tb_3_crc_len 8 +#define fec_vtb_tb_3_crc_lsb 0 +#define xd_r_fec_vtb_tb_2_crc 0xA39A +#define fec_vtb_tb_2_crc_pos 0 +#define fec_vtb_tb_2_crc_len 8 +#define fec_vtb_tb_2_crc_lsb 0 +#define xd_r_fec_vtb_tb_1_crc 0xA39B +#define fec_vtb_tb_1_crc_pos 0 +#define fec_vtb_tb_1_crc_len 8 +#define fec_vtb_tb_1_crc_lsb 0 +#define xd_r_fec_vtb_tb_0_crc 0xA39C +#define fec_vtb_tb_0_crc_pos 0 +#define fec_vtb_tb_0_crc_len 8 +#define fec_vtb_tb_0_crc_lsb 0 +#define xd_r_fec_rsd_bank0_crc 0xA39D +#define fec_rsd_bank0_crc_pos 0 +#define fec_rsd_bank0_crc_len 8 +#define fec_rsd_bank0_crc_lsb 0 +#define xd_r_fec_rsd_bank1_crc 0xA39E +#define fec_rsd_bank1_crc_pos 0 +#define fec_rsd_bank1_crc_len 8 +#define fec_rsd_bank1_crc_lsb 0 +#define xd_r_fec_idi_vtb_crc 0xA39F +#define fec_idi_vtb_crc_pos 0 +#define fec_idi_vtb_crc_len 8 +#define fec_idi_vtb_crc_lsb 0 +#define xd_g_reg_tpsd_txmod 0xA3C0 +#define reg_tpsd_txmod_pos 0 +#define reg_tpsd_txmod_len 2 +#define reg_tpsd_txmod_lsb 0 +#define xd_g_reg_tpsd_gi 0xA3C0 +#define reg_tpsd_gi_pos 2 +#define reg_tpsd_gi_len 2 +#define reg_tpsd_gi_lsb 0 +#define xd_g_reg_tpsd_hier 0xA3C0 +#define reg_tpsd_hier_pos 4 +#define reg_tpsd_hier_len 3 +#define reg_tpsd_hier_lsb 0 +#define xd_g_reg_bw 0xA3C1 +#define reg_bw_pos 2 +#define reg_bw_len 2 +#define reg_bw_lsb 0 +#define xd_g_reg_dec_pri 0xA3C1 +#define reg_dec_pri_pos 4 +#define reg_dec_pri_len 1 +#define reg_dec_pri_lsb 0 +#define xd_g_reg_tpsd_const 0xA3C1 +#define reg_tpsd_const_pos 6 +#define reg_tpsd_const_len 2 +#define reg_tpsd_const_lsb 0 +#define xd_g_reg_tpsd_hpcr 0xA3C2 +#define reg_tpsd_hpcr_pos 0 +#define reg_tpsd_hpcr_len 3 +#define reg_tpsd_hpcr_lsb 0 +#define xd_g_reg_tpsd_lpcr 0xA3C2 +#define reg_tpsd_lpcr_pos 3 +#define reg_tpsd_lpcr_len 3 +#define reg_tpsd_lpcr_lsb 0 +#define xd_g_reg_ofsm_clk 0xA3D0 +#define reg_ofsm_clk_pos 0 +#define reg_ofsm_clk_len 3 +#define reg_ofsm_clk_lsb 0 +#define xd_g_reg_fclk_cfg 0xA3D1 +#define reg_fclk_cfg_pos 0 +#define reg_fclk_cfg_len 1 +#define reg_fclk_cfg_lsb 0 +#define xd_g_reg_fclk_idi 0xA3D1 +#define reg_fclk_idi_pos 1 +#define reg_fclk_idi_len 1 +#define reg_fclk_idi_lsb 0 +#define xd_g_reg_fclk_odi 0xA3D1 +#define reg_fclk_odi_pos 2 +#define reg_fclk_odi_len 1 +#define reg_fclk_odi_lsb 0 +#define xd_g_reg_fclk_rsd 0xA3D1 +#define reg_fclk_rsd_pos 3 +#define reg_fclk_rsd_len 1 +#define reg_fclk_rsd_lsb 0 +#define xd_g_reg_fclk_vtb 0xA3D1 +#define reg_fclk_vtb_pos 4 +#define reg_fclk_vtb_len 1 +#define reg_fclk_vtb_lsb 0 +#define xd_g_reg_fclk_cste 0xA3D1 +#define reg_fclk_cste_pos 5 +#define reg_fclk_cste_len 1 +#define reg_fclk_cste_lsb 0 +#define xd_g_reg_fclk_mp2if 0xA3D1 +#define reg_fclk_mp2if_pos 6 +#define reg_fclk_mp2if_len 1 +#define reg_fclk_mp2if_lsb 0 +#define xd_I2C_i2c_m_slave_addr 0xA400 +#define i2c_m_slave_addr_pos 0 +#define i2c_m_slave_addr_len 8 +#define i2c_m_slave_addr_lsb 0 +#define xd_I2C_i2c_m_data1 0xA401 +#define i2c_m_data1_pos 0 +#define i2c_m_data1_len 8 +#define i2c_m_data1_lsb 0 +#define xd_I2C_i2c_m_data2 0xA402 +#define i2c_m_data2_pos 0 +#define i2c_m_data2_len 8 +#define i2c_m_data2_lsb 0 +#define xd_I2C_i2c_m_data3 0xA403 +#define i2c_m_data3_pos 0 +#define i2c_m_data3_len 8 +#define i2c_m_data3_lsb 0 +#define xd_I2C_i2c_m_data4 0xA404 +#define i2c_m_data4_pos 0 +#define i2c_m_data4_len 8 +#define i2c_m_data4_lsb 0 +#define xd_I2C_i2c_m_data5 0xA405 +#define i2c_m_data5_pos 0 +#define i2c_m_data5_len 8 +#define i2c_m_data5_lsb 0 +#define xd_I2C_i2c_m_data6 0xA406 +#define i2c_m_data6_pos 0 +#define i2c_m_data6_len 8 +#define i2c_m_data6_lsb 0 +#define xd_I2C_i2c_m_data7 0xA407 +#define i2c_m_data7_pos 0 +#define i2c_m_data7_len 8 +#define i2c_m_data7_lsb 0 +#define xd_I2C_i2c_m_data8 0xA408 +#define i2c_m_data8_pos 0 +#define i2c_m_data8_len 8 +#define i2c_m_data8_lsb 0 +#define xd_I2C_i2c_m_data9 0xA409 +#define i2c_m_data9_pos 0 +#define i2c_m_data9_len 8 +#define i2c_m_data9_lsb 0 +#define xd_I2C_i2c_m_data10 0xA40A +#define i2c_m_data10_pos 0 +#define i2c_m_data10_len 8 +#define i2c_m_data10_lsb 0 +#define xd_I2C_i2c_m_data11 0xA40B +#define i2c_m_data11_pos 0 +#define i2c_m_data11_len 8 +#define i2c_m_data11_lsb 0 +#define xd_I2C_i2c_m_cmd_rw 0xA40C +#define i2c_m_cmd_rw_pos 0 +#define i2c_m_cmd_rw_len 1 +#define i2c_m_cmd_rw_lsb 0 +#define xd_I2C_i2c_m_cmd_rwlen 0xA40C +#define i2c_m_cmd_rwlen_pos 3 +#define i2c_m_cmd_rwlen_len 4 +#define i2c_m_cmd_rwlen_lsb 0 +#define xd_I2C_i2c_m_status_cmd_exe 0xA40D +#define i2c_m_status_cmd_exe_pos 0 +#define i2c_m_status_cmd_exe_len 1 +#define i2c_m_status_cmd_exe_lsb 0 +#define xd_I2C_i2c_m_status_wdat_done 0xA40D +#define i2c_m_status_wdat_done_pos 1 +#define i2c_m_status_wdat_done_len 1 +#define i2c_m_status_wdat_done_lsb 0 +#define xd_I2C_i2c_m_status_wdat_fail 0xA40D +#define i2c_m_status_wdat_fail_pos 2 +#define i2c_m_status_wdat_fail_len 1 +#define i2c_m_status_wdat_fail_lsb 0 +#define xd_I2C_i2c_m_period 0xA40E +#define i2c_m_period_pos 0 +#define i2c_m_period_len 8 +#define i2c_m_period_lsb 0 +#define xd_I2C_i2c_m_reg_msb_lsb 0xA40F +#define i2c_m_reg_msb_lsb_pos 0 +#define i2c_m_reg_msb_lsb_len 1 +#define i2c_m_reg_msb_lsb_lsb 0 +#define xd_I2C_reg_ofdm_rst 0xA40F +#define reg_ofdm_rst_pos 1 +#define reg_ofdm_rst_len 1 +#define reg_ofdm_rst_lsb 0 +#define xd_I2C_reg_sample_period_on_tuner 0xA40F +#define reg_sample_period_on_tuner_pos 2 +#define reg_sample_period_on_tuner_len 1 +#define reg_sample_period_on_tuner_lsb 0 +#define xd_I2C_reg_rst_i2c 0xA40F +#define reg_rst_i2c_pos 3 +#define reg_rst_i2c_len 1 +#define reg_rst_i2c_lsb 0 +#define xd_I2C_reg_ofdm_rst_en 0xA40F +#define reg_ofdm_rst_en_pos 4 +#define reg_ofdm_rst_en_len 1 +#define reg_ofdm_rst_en_lsb 0 +#define xd_I2C_reg_tuner_sda_sync_on 0xA40F +#define reg_tuner_sda_sync_on_pos 5 +#define reg_tuner_sda_sync_on_len 1 +#define reg_tuner_sda_sync_on_lsb 0 +#define xd_p_mp2if_data_access_disable_ofsm 0xA500 +#define mp2if_data_access_disable_ofsm_pos 0 +#define mp2if_data_access_disable_ofsm_len 1 +#define mp2if_data_access_disable_ofsm_lsb 0 +#define xd_p_reg_mp2_sw_rst_ofsm 0xA500 +#define reg_mp2_sw_rst_ofsm_pos 1 +#define reg_mp2_sw_rst_ofsm_len 1 +#define reg_mp2_sw_rst_ofsm_lsb 0 +#define xd_p_reg_mp2if_clk_en_ofsm 0xA500 +#define reg_mp2if_clk_en_ofsm_pos 2 +#define reg_mp2if_clk_en_ofsm_len 1 +#define reg_mp2if_clk_en_ofsm_lsb 0 +#define xd_r_mp2if_sync_byte_locked 0xA500 +#define mp2if_sync_byte_locked_pos 3 +#define mp2if_sync_byte_locked_len 1 +#define mp2if_sync_byte_locked_lsb 0 +#define xd_r_mp2if_ts_not_188 0xA500 +#define mp2if_ts_not_188_pos 4 +#define mp2if_ts_not_188_len 1 +#define mp2if_ts_not_188_lsb 0 +#define xd_r_mp2if_psb_empty 0xA500 +#define mp2if_psb_empty_pos 5 +#define mp2if_psb_empty_len 1 +#define mp2if_psb_empty_lsb 0 +#define xd_r_mp2if_psb_overflow 0xA500 +#define mp2if_psb_overflow_pos 6 +#define mp2if_psb_overflow_len 1 +#define mp2if_psb_overflow_lsb 0 +#define xd_p_mp2if_keep_sf_sync_byte_ofsm 0xA500 +#define mp2if_keep_sf_sync_byte_ofsm_pos 7 +#define mp2if_keep_sf_sync_byte_ofsm_len 1 +#define mp2if_keep_sf_sync_byte_ofsm_lsb 0 +#define xd_r_mp2if_psb_mp2if_num_pkt 0xA501 +#define mp2if_psb_mp2if_num_pkt_pos 0 +#define mp2if_psb_mp2if_num_pkt_len 6 +#define mp2if_psb_mp2if_num_pkt_lsb 0 +#define xd_p_reg_mpeg_full_speed_ofsm 0xA501 +#define reg_mpeg_full_speed_ofsm_pos 6 +#define reg_mpeg_full_speed_ofsm_len 1 +#define reg_mpeg_full_speed_ofsm_lsb 0 +#define xd_p_mp2if_mpeg_ser_mode_ofsm 0xA501 +#define mp2if_mpeg_ser_mode_ofsm_pos 7 +#define mp2if_mpeg_ser_mode_ofsm_len 1 +#define mp2if_mpeg_ser_mode_ofsm_lsb 0 +#define xd_p_reg_sw_mon51 0xA600 +#define reg_sw_mon51_pos 0 +#define reg_sw_mon51_len 8 +#define reg_sw_mon51_lsb 0 +#define xd_p_reg_top_pcsel 0xA601 +#define reg_top_pcsel_pos 0 +#define reg_top_pcsel_len 1 +#define reg_top_pcsel_lsb 0 +#define xd_p_reg_top_rs232 0xA601 +#define reg_top_rs232_pos 1 +#define reg_top_rs232_len 1 +#define reg_top_rs232_lsb 0 +#define xd_p_reg_top_pcout 0xA601 +#define reg_top_pcout_pos 2 +#define reg_top_pcout_len 1 +#define reg_top_pcout_lsb 0 +#define xd_p_reg_top_debug 0xA601 +#define reg_top_debug_pos 3 +#define reg_top_debug_len 1 +#define reg_top_debug_lsb 0 +#define xd_p_reg_top_adcdly 0xA601 +#define reg_top_adcdly_pos 4 +#define reg_top_adcdly_len 2 +#define reg_top_adcdly_lsb 0 +#define xd_p_reg_top_pwrdw 0xA601 +#define reg_top_pwrdw_pos 6 +#define reg_top_pwrdw_len 1 +#define reg_top_pwrdw_lsb 0 +#define xd_p_reg_top_pwrdw_inv 0xA601 +#define reg_top_pwrdw_inv_pos 7 +#define reg_top_pwrdw_inv_len 1 +#define reg_top_pwrdw_inv_lsb 0 +#define xd_p_reg_top_int_inv 0xA602 +#define reg_top_int_inv_pos 0 +#define reg_top_int_inv_len 1 +#define reg_top_int_inv_lsb 0 +#define xd_p_reg_top_dio_sel 0xA602 +#define reg_top_dio_sel_pos 1 +#define reg_top_dio_sel_len 1 +#define reg_top_dio_sel_lsb 0 +#define xd_p_reg_top_gpioon0 0xA603 +#define reg_top_gpioon0_pos 0 +#define reg_top_gpioon0_len 1 +#define reg_top_gpioon0_lsb 0 +#define xd_p_reg_top_gpioon1 0xA603 +#define reg_top_gpioon1_pos 1 +#define reg_top_gpioon1_len 1 +#define reg_top_gpioon1_lsb 0 +#define xd_p_reg_top_gpioon2 0xA603 +#define reg_top_gpioon2_pos 2 +#define reg_top_gpioon2_len 1 +#define reg_top_gpioon2_lsb 0 +#define xd_p_reg_top_gpioon3 0xA603 +#define reg_top_gpioon3_pos 3 +#define reg_top_gpioon3_len 1 +#define reg_top_gpioon3_lsb 0 +#define xd_p_reg_top_lockon1 0xA603 +#define reg_top_lockon1_pos 4 +#define reg_top_lockon1_len 1 +#define reg_top_lockon1_lsb 0 +#define xd_p_reg_top_lockon2 0xA603 +#define reg_top_lockon2_pos 5 +#define reg_top_lockon2_len 1 +#define reg_top_lockon2_lsb 0 +#define xd_p_reg_top_gpioo0 0xA604 +#define reg_top_gpioo0_pos 0 +#define reg_top_gpioo0_len 1 +#define reg_top_gpioo0_lsb 0 +#define xd_p_reg_top_gpioo1 0xA604 +#define reg_top_gpioo1_pos 1 +#define reg_top_gpioo1_len 1 +#define reg_top_gpioo1_lsb 0 +#define xd_p_reg_top_gpioo2 0xA604 +#define reg_top_gpioo2_pos 2 +#define reg_top_gpioo2_len 1 +#define reg_top_gpioo2_lsb 0 +#define xd_p_reg_top_gpioo3 0xA604 +#define reg_top_gpioo3_pos 3 +#define reg_top_gpioo3_len 1 +#define reg_top_gpioo3_lsb 0 +#define xd_p_reg_top_lock1 0xA604 +#define reg_top_lock1_pos 4 +#define reg_top_lock1_len 1 +#define reg_top_lock1_lsb 0 +#define xd_p_reg_top_lock2 0xA604 +#define reg_top_lock2_pos 5 +#define reg_top_lock2_len 1 +#define reg_top_lock2_lsb 0 +#define xd_p_reg_top_gpioen0 0xA605 +#define reg_top_gpioen0_pos 0 +#define reg_top_gpioen0_len 1 +#define reg_top_gpioen0_lsb 0 +#define xd_p_reg_top_gpioen1 0xA605 +#define reg_top_gpioen1_pos 1 +#define reg_top_gpioen1_len 1 +#define reg_top_gpioen1_lsb 0 +#define xd_p_reg_top_gpioen2 0xA605 +#define reg_top_gpioen2_pos 2 +#define reg_top_gpioen2_len 1 +#define reg_top_gpioen2_lsb 0 +#define xd_p_reg_top_gpioen3 0xA605 +#define reg_top_gpioen3_pos 3 +#define reg_top_gpioen3_len 1 +#define reg_top_gpioen3_lsb 0 +#define xd_p_reg_top_locken1 0xA605 +#define reg_top_locken1_pos 4 +#define reg_top_locken1_len 1 +#define reg_top_locken1_lsb 0 +#define xd_p_reg_top_locken2 0xA605 +#define reg_top_locken2_pos 5 +#define reg_top_locken2_len 1 +#define reg_top_locken2_lsb 0 +#define xd_r_reg_top_gpioi0 0xA606 +#define reg_top_gpioi0_pos 0 +#define reg_top_gpioi0_len 1 +#define reg_top_gpioi0_lsb 0 +#define xd_r_reg_top_gpioi1 0xA606 +#define reg_top_gpioi1_pos 1 +#define reg_top_gpioi1_len 1 +#define reg_top_gpioi1_lsb 0 +#define xd_r_reg_top_gpioi2 0xA606 +#define reg_top_gpioi2_pos 2 +#define reg_top_gpioi2_len 1 +#define reg_top_gpioi2_lsb 0 +#define xd_r_reg_top_gpioi3 0xA606 +#define reg_top_gpioi3_pos 3 +#define reg_top_gpioi3_len 1 +#define reg_top_gpioi3_lsb 0 +#define xd_r_reg_top_locki1 0xA606 +#define reg_top_locki1_pos 4 +#define reg_top_locki1_len 1 +#define reg_top_locki1_lsb 0 +#define xd_r_reg_top_locki2 0xA606 +#define reg_top_locki2_pos 5 +#define reg_top_locki2_len 1 +#define reg_top_locki2_lsb 0 +#define xd_p_reg_dummy_7_0 0xA608 +#define reg_dummy_7_0_pos 0 +#define reg_dummy_7_0_len 8 +#define reg_dummy_7_0_lsb 0 +#define xd_p_reg_dummy_15_8 0xA609 +#define reg_dummy_15_8_pos 0 +#define reg_dummy_15_8_len 8 +#define reg_dummy_15_8_lsb 8 +#define xd_p_reg_dummy_23_16 0xA60A +#define reg_dummy_23_16_pos 0 +#define reg_dummy_23_16_len 8 +#define reg_dummy_23_16_lsb 16 +#define xd_p_reg_dummy_31_24 0xA60B +#define reg_dummy_31_24_pos 0 +#define reg_dummy_31_24_len 8 +#define reg_dummy_31_24_lsb 24 +#define xd_p_reg_dummy_39_32 0xA60C +#define reg_dummy_39_32_pos 0 +#define reg_dummy_39_32_len 8 +#define reg_dummy_39_32_lsb 32 +#define xd_p_reg_dummy_47_40 0xA60D +#define reg_dummy_47_40_pos 0 +#define reg_dummy_47_40_len 8 +#define reg_dummy_47_40_lsb 40 +#define xd_p_reg_dummy_55_48 0xA60E +#define reg_dummy_55_48_pos 0 +#define reg_dummy_55_48_len 8 +#define reg_dummy_55_48_lsb 48 +#define xd_p_reg_dummy_63_56 0xA60F +#define reg_dummy_63_56_pos 0 +#define reg_dummy_63_56_len 8 +#define reg_dummy_63_56_lsb 56 +#define xd_p_reg_dummy_71_64 0xA610 +#define reg_dummy_71_64_pos 0 +#define reg_dummy_71_64_len 8 +#define reg_dummy_71_64_lsb 64 +#define xd_p_reg_dummy_79_72 0xA611 +#define reg_dummy_79_72_pos 0 +#define reg_dummy_79_72_len 8 +#define reg_dummy_79_72_lsb 72 +#define xd_p_reg_dummy_87_80 0xA612 +#define reg_dummy_87_80_pos 0 +#define reg_dummy_87_80_len 8 +#define reg_dummy_87_80_lsb 80 +#define xd_p_reg_dummy_95_88 0xA613 +#define reg_dummy_95_88_pos 0 +#define reg_dummy_95_88_len 8 +#define reg_dummy_95_88_lsb 88 +#define xd_p_reg_dummy_103_96 0xA614 +#define reg_dummy_103_96_pos 0 +#define reg_dummy_103_96_len 8 +#define reg_dummy_103_96_lsb 96 + +#define xd_p_reg_unplug_flag 0xA615 +#define reg_unplug_flag_pos 0 +#define reg_unplug_flag_len 1 +#define reg_unplug_flag_lsb 104 + +#define xd_p_reg_api_dca_stes_request 0xA615 +#define reg_api_dca_stes_request_pos 1 +#define reg_api_dca_stes_request_len 1 +#define reg_api_dca_stes_request_lsb 0 + +#define xd_p_reg_back_to_dca_flag 0xA615 +#define reg_back_to_dca_flag_pos 2 +#define reg_back_to_dca_flag_len 1 +#define reg_back_to_dca_flag_lsb 106 + +#define xd_p_reg_api_retrain_request 0xA615 +#define reg_api_retrain_request_pos 3 +#define reg_api_retrain_request_len 1 +#define reg_api_retrain_request_lsb 0 + +#define xd_p_reg_Dyn_Top_Try_flag 0xA615 +#define reg_Dyn_Top_Try_flag_pos 3 +#define reg_Dyn_Top_Try_flag_len 1 +#define reg_Dyn_Top_Try_flag_lsb 107 + +#define xd_p_reg_API_retrain_freeze_flag 0xA615 +#define reg_API_retrain_freeze_flag_pos 4 +#define reg_API_retrain_freeze_flag_len 1 +#define reg_API_retrain_freeze_flag_lsb 108 + +#define xd_p_reg_dummy_111_104 0xA615 +#define reg_dummy_111_104_pos 0 +#define reg_dummy_111_104_len 8 +#define reg_dummy_111_104_lsb 104 +#define xd_p_reg_dummy_119_112 0xA616 +#define reg_dummy_119_112_pos 0 +#define reg_dummy_119_112_len 8 +#define reg_dummy_119_112_lsb 112 +#define xd_p_reg_dummy_127_120 0xA617 +#define reg_dummy_127_120_pos 0 +#define reg_dummy_127_120_len 8 +#define reg_dummy_127_120_lsb 120 +#define xd_p_reg_dummy_135_128 0xA618 +#define reg_dummy_135_128_pos 0 +#define reg_dummy_135_128_len 8 +#define reg_dummy_135_128_lsb 128 + +#define xd_p_reg_dummy_143_136 0xA619 +#define reg_dummy_143_136_pos 0 +#define reg_dummy_143_136_len 8 +#define reg_dummy_143_136_lsb 136 + +#define xd_p_reg_CCIR_dis 0xA619 +#define reg_CCIR_dis_pos 0 +#define reg_CCIR_dis_len 1 +#define reg_CCIR_dis_lsb 0 + +#define xd_p_reg_dummy_151_144 0xA61A +#define reg_dummy_151_144_pos 0 +#define reg_dummy_151_144_len 8 +#define reg_dummy_151_144_lsb 144 + +#define xd_p_reg_dummy_159_152 0xA61B +#define reg_dummy_159_152_pos 0 +#define reg_dummy_159_152_len 8 +#define reg_dummy_159_152_lsb 152 + +#define xd_p_reg_dummy_167_160 0xA61C +#define reg_dummy_167_160_pos 0 +#define reg_dummy_167_160_len 8 +#define reg_dummy_167_160_lsb 160 + +#define xd_p_reg_dummy_175_168 0xA61D +#define reg_dummy_175_168_pos 0 +#define reg_dummy_175_168_len 8 +#define reg_dummy_175_168_lsb 168 + +#define xd_p_reg_dummy_183_176 0xA61E +#define reg_dummy_183_176_pos 0 +#define reg_dummy_183_176_len 8 +#define reg_dummy_183_176_lsb 176 + +#define xd_p_reg_ofsm_read_rbc_en 0xA61E +#define reg_ofsm_read_rbc_en_pos 2 +#define reg_ofsm_read_rbc_en_len 1 +#define reg_ofsm_read_rbc_en_lsb 0 + +#define xd_p_reg_ce_filter_selection_dis 0xA61E +#define reg_ce_filter_selection_dis_pos 1 +#define reg_ce_filter_selection_dis_len 1 +#define reg_ce_filter_selection_dis_lsb 0 + +#define xd_p_reg_OFSM_version_control_7_0 0xA611 +#define reg_OFSM_version_control_7_0_pos 0 +#define reg_OFSM_version_control_7_0_len 8 +#define reg_OFSM_version_control_7_0_lsb 0 + +#define xd_p_reg_OFSM_version_control_15_8 0xA61F +#define reg_OFSM_version_control_15_8_pos 0 +#define reg_OFSM_version_control_15_8_len 8 +#define reg_OFSM_version_control_15_8_lsb 0 + +#define xd_p_reg_OFSM_version_control_23_16 0xA620 +#define reg_OFSM_version_control_23_16_pos 0 +#define reg_OFSM_version_control_23_16_len 8 +#define reg_OFSM_version_control_23_16_lsb 0 + +#define xd_p_reg_dummy_191_184 0xA61F +#define reg_dummy_191_184_pos 0 +#define reg_dummy_191_184_len 8 +#define reg_dummy_191_184_lsb 184 + +#define xd_p_reg_dummy_199_192 0xA620 +#define reg_dummy_199_192_pos 0 +#define reg_dummy_199_192_len 8 +#define reg_dummy_199_192_lsb 192 + +#define xd_p_reg_ce_en 0xABC0 +#define reg_ce_en_pos 0 +#define reg_ce_en_len 1 +#define reg_ce_en_lsb 0 +#define xd_p_reg_ce_fctrl_en 0xABC0 +#define reg_ce_fctrl_en_pos 1 +#define reg_ce_fctrl_en_len 1 +#define reg_ce_fctrl_en_lsb 0 +#define xd_p_reg_ce_fste_tdi 0xABC0 +#define reg_ce_fste_tdi_pos 2 +#define reg_ce_fste_tdi_len 1 +#define reg_ce_fste_tdi_lsb 0 +#define xd_p_reg_ce_dynamic 0xABC0 +#define reg_ce_dynamic_pos 3 +#define reg_ce_dynamic_len 1 +#define reg_ce_dynamic_lsb 0 +#define xd_p_reg_ce_conf 0xABC0 +#define reg_ce_conf_pos 4 +#define reg_ce_conf_len 2 +#define reg_ce_conf_lsb 0 +#define xd_p_reg_ce_dyn12 0xABC0 +#define reg_ce_dyn12_pos 6 +#define reg_ce_dyn12_len 1 +#define reg_ce_dyn12_lsb 0 +#define xd_p_reg_ce_derot_en 0xABC0 +#define reg_ce_derot_en_pos 7 +#define reg_ce_derot_en_len 1 +#define reg_ce_derot_en_lsb 0 +#define xd_p_reg_ce_dynamic_th_7_0 0xABC1 +#define reg_ce_dynamic_th_7_0_pos 0 +#define reg_ce_dynamic_th_7_0_len 8 +#define reg_ce_dynamic_th_7_0_lsb 0 +#define xd_p_reg_ce_dynamic_th_15_8 0xABC2 +#define reg_ce_dynamic_th_15_8_pos 0 +#define reg_ce_dynamic_th_15_8_len 8 +#define reg_ce_dynamic_th_15_8_lsb 8 +#define xd_p_reg_ce_s1 0xABC3 +#define reg_ce_s1_pos 0 +#define reg_ce_s1_len 5 +#define reg_ce_s1_lsb 0 +#define xd_p_reg_ce_var_forced_value 0xABC3 +#define reg_ce_var_forced_value_pos 5 +#define reg_ce_var_forced_value_len 3 +#define reg_ce_var_forced_value_lsb 0 +#define xd_p_reg_ce_data_im_7_0 0xABC4 +#define reg_ce_data_im_7_0_pos 0 +#define reg_ce_data_im_7_0_len 8 +#define reg_ce_data_im_7_0_lsb 0 +#define xd_p_reg_ce_data_im_8 0xABC5 +#define reg_ce_data_im_8_pos 0 +#define reg_ce_data_im_8_len 1 +#define reg_ce_data_im_8_lsb 0 +#define xd_p_reg_ce_data_re_6_0 0xABC5 +#define reg_ce_data_re_6_0_pos 1 +#define reg_ce_data_re_6_0_len 7 +#define reg_ce_data_re_6_0_lsb 0 +#define xd_p_reg_ce_data_re_8_7 0xABC6 +#define reg_ce_data_re_8_7_pos 0 +#define reg_ce_data_re_8_7_len 2 +#define reg_ce_data_re_8_7_lsb 7 +#define xd_p_reg_ce_tone_5_0 0xABC6 +#define reg_ce_tone_5_0_pos 2 +#define reg_ce_tone_5_0_len 6 +#define reg_ce_tone_5_0_lsb 0 +#define xd_p_reg_ce_tone_12_6 0xABC7 +#define reg_ce_tone_12_6_pos 0 +#define reg_ce_tone_12_6_len 7 +#define reg_ce_tone_12_6_lsb 6 +#define xd_p_reg_ce_centroid_drift_th 0xABC8 +#define reg_ce_centroid_drift_th_pos 0 +#define reg_ce_centroid_drift_th_len 8 +#define reg_ce_centroid_drift_th_lsb 0 +#define xd_p_reg_ce_centroid_count_max 0xABC9 +#define reg_ce_centroid_count_max_pos 0 +#define reg_ce_centroid_count_max_len 4 +#define reg_ce_centroid_count_max_lsb 0 +#define xd_p_reg_ce_centroid_bias_inc_7_0 0xABCA +#define reg_ce_centroid_bias_inc_7_0_pos 0 +#define reg_ce_centroid_bias_inc_7_0_len 8 +#define reg_ce_centroid_bias_inc_7_0_lsb 0 +#define xd_p_reg_ce_centroid_bias_inc_8 0xABCB +#define reg_ce_centroid_bias_inc_8_pos 0 +#define reg_ce_centroid_bias_inc_8_len 1 +#define reg_ce_centroid_bias_inc_8_lsb 0 +#define xd_p_reg_ce_var_th0_7_0 0xABCC +#define reg_ce_var_th0_7_0_pos 0 +#define reg_ce_var_th0_7_0_len 8 +#define reg_ce_var_th0_7_0_lsb 0 +#define xd_p_reg_ce_var_th0_15_8 0xABCD +#define reg_ce_var_th0_15_8_pos 0 +#define reg_ce_var_th0_15_8_len 8 +#define reg_ce_var_th0_15_8_lsb 8 +#define xd_p_reg_ce_var_th1_7_0 0xABCE +#define reg_ce_var_th1_7_0_pos 0 +#define reg_ce_var_th1_7_0_len 8 +#define reg_ce_var_th1_7_0_lsb 0 +#define xd_p_reg_ce_var_th1_15_8 0xABCF +#define reg_ce_var_th1_15_8_pos 0 +#define reg_ce_var_th1_15_8_len 8 +#define reg_ce_var_th1_15_8_lsb 8 +#define xd_p_reg_ce_var_th2_7_0 0xABD0 +#define reg_ce_var_th2_7_0_pos 0 +#define reg_ce_var_th2_7_0_len 8 +#define reg_ce_var_th2_7_0_lsb 0 +#define xd_p_reg_ce_var_th2_15_8 0xABD1 +#define reg_ce_var_th2_15_8_pos 0 +#define reg_ce_var_th2_15_8_len 8 +#define reg_ce_var_th2_15_8_lsb 8 +#define xd_p_reg_ce_var_th3_7_0 0xABD2 +#define reg_ce_var_th3_7_0_pos 0 +#define reg_ce_var_th3_7_0_len 8 +#define reg_ce_var_th3_7_0_lsb 0 +#define xd_p_reg_ce_var_th3_15_8 0xABD3 +#define reg_ce_var_th3_15_8_pos 0 +#define reg_ce_var_th3_15_8_len 8 +#define reg_ce_var_th3_15_8_lsb 8 +#define xd_p_reg_ce_var_th4_7_0 0xABD4 +#define reg_ce_var_th4_7_0_pos 0 +#define reg_ce_var_th4_7_0_len 8 +#define reg_ce_var_th4_7_0_lsb 0 +#define xd_p_reg_ce_var_th4_15_8 0xABD5 +#define reg_ce_var_th4_15_8_pos 0 +#define reg_ce_var_th4_15_8_len 8 +#define reg_ce_var_th4_15_8_lsb 8 +#define xd_p_reg_ce_var_th5_7_0 0xABD6 +#define reg_ce_var_th5_7_0_pos 0 +#define reg_ce_var_th5_7_0_len 8 +#define reg_ce_var_th5_7_0_lsb 0 +#define xd_p_reg_ce_var_th5_15_8 0xABD7 +#define reg_ce_var_th5_15_8_pos 0 +#define reg_ce_var_th5_15_8_len 8 +#define reg_ce_var_th5_15_8_lsb 8 +#define xd_p_reg_ce_var_th6_7_0 0xABD8 +#define reg_ce_var_th6_7_0_pos 0 +#define reg_ce_var_th6_7_0_len 8 +#define reg_ce_var_th6_7_0_lsb 0 +#define xd_p_reg_ce_var_th6_15_8 0xABD9 +#define reg_ce_var_th6_15_8_pos 0 +#define reg_ce_var_th6_15_8_len 8 +#define reg_ce_var_th6_15_8_lsb 8 +#define xd_p_reg_ce_fctrl_reset 0xABDA +#define reg_ce_fctrl_reset_pos 0 +#define reg_ce_fctrl_reset_len 1 +#define reg_ce_fctrl_reset_lsb 0 +#define xd_p_reg_ce_cent_auto_clr_en 0xABDA +#define reg_ce_cent_auto_clr_en_pos 1 +#define reg_ce_cent_auto_clr_en_len 1 +#define reg_ce_cent_auto_clr_en_lsb 0 +#define xd_p_reg_ce_fctrl_auto_reset_en 0xABDA +#define reg_ce_fctrl_auto_reset_en_pos 2 +#define reg_ce_fctrl_auto_reset_en_len 1 +#define reg_ce_fctrl_auto_reset_en_lsb 0 +#define xd_p_reg_ce_var_forced_en 0xABDA +#define reg_ce_var_forced_en_pos 3 +#define reg_ce_var_forced_en_len 1 +#define reg_ce_var_forced_en_lsb 0 +#define xd_p_reg_ce_cent_forced_en 0xABDA +#define reg_ce_cent_forced_en_pos 4 +#define reg_ce_cent_forced_en_len 1 +#define reg_ce_cent_forced_en_lsb 0 +#define xd_p_reg_ce_var_max 0xABDA +#define reg_ce_var_max_pos 5 +#define reg_ce_var_max_len 3 +#define reg_ce_var_max_lsb 0 +#define xd_p_reg_ce_cent_forced_value_7_0 0xABDB +#define reg_ce_cent_forced_value_7_0_pos 0 +#define reg_ce_cent_forced_value_7_0_len 8 +#define reg_ce_cent_forced_value_7_0_lsb 0 +#define xd_p_reg_ce_cent_forced_value_11_8 0xABDC +#define reg_ce_cent_forced_value_11_8_pos 0 +#define reg_ce_cent_forced_value_11_8_len 4 +#define reg_ce_cent_forced_value_11_8_lsb 8 +#define xd_p_reg_ce_fctrl_rd 0xABDD +#define reg_ce_fctrl_rd_pos 0 +#define reg_ce_fctrl_rd_len 1 +#define reg_ce_fctrl_rd_lsb 0 +#define xd_p_reg_ce_centroid_max_6_0 0xABDD +#define reg_ce_centroid_max_6_0_pos 1 +#define reg_ce_centroid_max_6_0_len 7 +#define reg_ce_centroid_max_6_0_lsb 0 +#define xd_p_reg_ce_centroid_max_11_7 0xABDE +#define reg_ce_centroid_max_11_7_pos 0 +#define reg_ce_centroid_max_11_7_len 5 +#define reg_ce_centroid_max_11_7_lsb 7 +#define xd_p_reg_ce_var 0xABDF +#define reg_ce_var_pos 0 +#define reg_ce_var_len 3 +#define reg_ce_var_lsb 0 +#define xd_p_reg_ce_fctrl_rdy 0xABDF +#define reg_ce_fctrl_rdy_pos 3 +#define reg_ce_fctrl_rdy_len 1 +#define reg_ce_fctrl_rdy_lsb 0 +#define xd_p_reg_ce_centroid_out_3_0 0xABDF +#define reg_ce_centroid_out_3_0_pos 4 +#define reg_ce_centroid_out_3_0_len 4 +#define reg_ce_centroid_out_3_0_lsb 0 +#define xd_p_reg_ce_centroid_out_11_4 0xABE0 +#define reg_ce_centroid_out_11_4_pos 0 +#define reg_ce_centroid_out_11_4_len 8 +#define reg_ce_centroid_out_11_4_lsb 4 +#define xd_p_reg_ce_bias_7_0 0xABE1 +#define reg_ce_bias_7_0_pos 0 +#define reg_ce_bias_7_0_len 8 +#define reg_ce_bias_7_0_lsb 0 +#define xd_p_reg_ce_bias_11_8 0xABE2 +#define reg_ce_bias_11_8_pos 0 +#define reg_ce_bias_11_8_len 4 +#define reg_ce_bias_11_8_lsb 8 +#define xd_p_reg_ce_m1_3_0 0xABE2 +#define reg_ce_m1_3_0_pos 4 +#define reg_ce_m1_3_0_len 4 +#define reg_ce_m1_3_0_lsb 0 +#define xd_p_reg_ce_m1_11_4 0xABE3 +#define reg_ce_m1_11_4_pos 0 +#define reg_ce_m1_11_4_len 8 +#define reg_ce_m1_11_4_lsb 4 +#define xd_p_reg_ce_rh0_7_0 0xABE4 +#define reg_ce_rh0_7_0_pos 0 +#define reg_ce_rh0_7_0_len 8 +#define reg_ce_rh0_7_0_lsb 0 +#define xd_p_reg_ce_rh0_15_8 0xABE5 +#define reg_ce_rh0_15_8_pos 0 +#define reg_ce_rh0_15_8_len 8 +#define reg_ce_rh0_15_8_lsb 8 +#define xd_p_reg_ce_rh0_23_16 0xABE6 +#define reg_ce_rh0_23_16_pos 0 +#define reg_ce_rh0_23_16_len 8 +#define reg_ce_rh0_23_16_lsb 16 +#define xd_p_reg_ce_rh0_31_24 0xABE7 +#define reg_ce_rh0_31_24_pos 0 +#define reg_ce_rh0_31_24_len 8 +#define reg_ce_rh0_31_24_lsb 24 +#define xd_p_reg_ce_rh3_real_7_0 0xABE8 +#define reg_ce_rh3_real_7_0_pos 0 +#define reg_ce_rh3_real_7_0_len 8 +#define reg_ce_rh3_real_7_0_lsb 0 +#define xd_p_reg_ce_rh3_real_15_8 0xABE9 +#define reg_ce_rh3_real_15_8_pos 0 +#define reg_ce_rh3_real_15_8_len 8 +#define reg_ce_rh3_real_15_8_lsb 8 +#define xd_p_reg_ce_rh3_real_23_16 0xABEA +#define reg_ce_rh3_real_23_16_pos 0 +#define reg_ce_rh3_real_23_16_len 8 +#define reg_ce_rh3_real_23_16_lsb 16 +#define xd_p_reg_ce_rh3_real_31_24 0xABEB +#define reg_ce_rh3_real_31_24_pos 0 +#define reg_ce_rh3_real_31_24_len 8 +#define reg_ce_rh3_real_31_24_lsb 24 +#define xd_p_reg_ce_rh3_imag_7_0 0xABEC +#define reg_ce_rh3_imag_7_0_pos 0 +#define reg_ce_rh3_imag_7_0_len 8 +#define reg_ce_rh3_imag_7_0_lsb 0 +#define xd_p_reg_ce_rh3_imag_15_8 0xABED +#define reg_ce_rh3_imag_15_8_pos 0 +#define reg_ce_rh3_imag_15_8_len 8 +#define reg_ce_rh3_imag_15_8_lsb 8 +#define xd_p_reg_ce_rh3_imag_23_16 0xABEE +#define reg_ce_rh3_imag_23_16_pos 0 +#define reg_ce_rh3_imag_23_16_len 8 +#define reg_ce_rh3_imag_23_16_lsb 16 +#define xd_p_reg_ce_rh3_imag_31_24 0xABEF +#define reg_ce_rh3_imag_31_24_pos 0 +#define reg_ce_rh3_imag_31_24_len 8 +#define reg_ce_rh3_imag_31_24_lsb 24 +#define xd_p_reg_feq_fix_eh2_7_0 0xABF0 +#define reg_feq_fix_eh2_7_0_pos 0 +#define reg_feq_fix_eh2_7_0_len 8 +#define reg_feq_fix_eh2_7_0_lsb 0 +#define xd_p_reg_feq_fix_eh2_15_8 0xABF1 +#define reg_feq_fix_eh2_15_8_pos 0 +#define reg_feq_fix_eh2_15_8_len 8 +#define reg_feq_fix_eh2_15_8_lsb 8 +#define xd_p_reg_feq_fix_eh2_23_16 0xABF2 +#define reg_feq_fix_eh2_23_16_pos 0 +#define reg_feq_fix_eh2_23_16_len 8 +#define reg_feq_fix_eh2_23_16_lsb 16 +#define xd_p_reg_feq_fix_eh2_31_24 0xABF3 +#define reg_feq_fix_eh2_31_24_pos 0 +#define reg_feq_fix_eh2_31_24_len 8 +#define reg_feq_fix_eh2_31_24_lsb 24 +#define xd_p_reg_ce_m2_central_7_0 0xABF4 +#define reg_ce_m2_central_7_0_pos 0 +#define reg_ce_m2_central_7_0_len 8 +#define reg_ce_m2_central_7_0_lsb 0 +#define xd_p_reg_ce_m2_central_15_8 0xABF5 +#define reg_ce_m2_central_15_8_pos 0 +#define reg_ce_m2_central_15_8_len 8 +#define reg_ce_m2_central_15_8_lsb 8 +#define xd_p_reg_ce_fftshift 0xABF6 +#define reg_ce_fftshift_pos 0 +#define reg_ce_fftshift_len 4 +#define reg_ce_fftshift_lsb 0 +#define xd_p_reg_ce_fftshift1 0xABF6 +#define reg_ce_fftshift1_pos 4 +#define reg_ce_fftshift1_len 4 +#define reg_ce_fftshift1_lsb 0 +#define xd_p_reg_ce_fftshift2 0xABF7 +#define reg_ce_fftshift2_pos 0 +#define reg_ce_fftshift2_len 4 +#define reg_ce_fftshift2_lsb 0 +#define xd_p_reg_ce_top_mobile 0xABF7 +#define reg_ce_top_mobile_pos 4 +#define reg_ce_top_mobile_len 1 +#define reg_ce_top_mobile_lsb 0 +#define xd_p_reg_strong_sginal_detected 0xA2BC +#define reg_strong_sginal_detected_pos 2 +#define reg_strong_sginal_detected_len 1 +#define reg_strong_sginal_detected_lsb 0 + +#define XD_MP2IF_BASE 0xB000 +#define XD_MP2IF_CSR (0x00 + XD_MP2IF_BASE) +#define XD_MP2IF_DMX_CTRL (0x03 + XD_MP2IF_BASE) +#define XD_MP2IF_PID_IDX (0x04 + XD_MP2IF_BASE) +#define XD_MP2IF_PID_DATA_L (0x05 + XD_MP2IF_BASE) +#define XD_MP2IF_PID_DATA_H (0x06 + XD_MP2IF_BASE) +#define XD_MP2IF_MISC (0x07 + XD_MP2IF_BASE) + +extern struct dvb_frontend *af9005_fe_attach(struct dvb_usb_device *d); +extern int af9005_read_ofdm_register(struct dvb_usb_device *d, u16 reg, + u8 * value); +extern int af9005_read_ofdm_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len); +extern int af9005_write_ofdm_register(struct dvb_usb_device *d, u16 reg, + u8 value); +extern int af9005_write_ofdm_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len); +extern int af9005_read_tuner_registers(struct dvb_usb_device *d, u16 reg, + u8 addr, u8 * values, int len); +extern int af9005_write_tuner_registers(struct dvb_usb_device *d, u16 reg, + u8 * values, int len); +extern int af9005_read_register_bits(struct dvb_usb_device *d, u16 reg, + u8 pos, u8 len, u8 * value); +extern int af9005_write_register_bits(struct dvb_usb_device *d, u16 reg, + u8 pos, u8 len, u8 value); +extern int af9005_send_command(struct dvb_usb_device *d, u8 command, + u8 * wbuf, int wlen, u8 * rbuf, int rlen); +extern int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, + u8 * values, int len); +extern int af9005_tuner_attach(struct dvb_usb_adapter *adap); +extern int af9005_led_control(struct dvb_usb_device *d, int onoff); + +extern u8 regmask[8]; + +/* remote control decoder */ +extern int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, + u32 * event, int *state); +extern struct rc_map_table rc_map_af9005_table[]; +extern int rc_map_af9005_table_size; + +#endif diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c new file mode 100644 index 000000000000..5e45ae605427 --- /dev/null +++ b/drivers/media/usb/dvb-usb/az6027.c @@ -0,0 +1,1182 @@ +/* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027) + * receiver. + * + * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "az6027.h" + +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" + +#include "stb6100.h" +#include "stb6100_cfg.h" +#include "dvb_ca_en50221.h" + +int dvb_usb_az6027_debug; +module_param_named(debug, dvb_usb_az6027_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct az6027_device_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + u8 power_state; +}; + +static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = { + + /* 0x0000000b, SYSREG */ + { STB0899_DEV_ID , 0x30 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x99 }, + { STB0899_DISF22RX , 0xa8 }, + /* SYSREG ? */ + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0xfe }, + { STB0899_IRQSTATUS_2 , 0x03 }, + { STB0899_IRQSTATUS_1 , 0x7c }, + { STB0899_IRQSTATUS_0 , 0xf4 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x33 }, + { STB0899_IOPVALUE3 , 0x6d }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x60 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x01 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x01 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x23 }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xf7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xf1 }, + { STB0899_LDT2 , 0xe3 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfd }, + { STB0899_QDCCOMP , 0xff }, + { STB0899_POWERI , 0x0c }, + { STB0899_POWERQ , 0x0f }, + { STB0899_RCOMP , 0x6c }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x06 }, + { STB0899_AGC2I2 , 0x00 }, + { STB0899_TLIR , 0x30 }, + { STB0899_RTF , 0x7f }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xbc }, + { STB0899_CFRM , 0xea }, + { STB0899_CFRL , 0x31 }, + { STB0899_NIRM , 0x2b }, + { STB0899_NIRL , 0x80 }, + { STB0899_ISYMB , 0x1d }, + { STB0899_QSYMB , 0xa6 }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0x02 }, + { STB0899_EQUAQ1 , 0xff }, + { STB0899_EQUAI2 , 0x04 }, + { STB0899_EQUAQ2 , 0x05 }, + { STB0899_EQUAI3 , 0x02 }, + { STB0899_EQUAQ3 , 0xfd }, + { STB0899_EQUAI4 , 0x03 }, + { STB0899_EQUAQ4 , 0x07 }, + { STB0899_EQUAI5 , 0x08 }, + { STB0899_EQUAQ5 , 0xf5 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0x86 }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x0a }, + { STB0899_ECNT3L , 0xad }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xb0 }, + { STB0899_VTH23 , 0x7a }, + { STB0899_VTH34 , 0x58 }, + { STB0899_VTH56 , 0x38 }, + { STB0899_VTH67 , 0x34 }, + { STB0899_VTH78 , 0x24 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x41 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x00 }, + { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x1b }, + { STB0899_TSLLSTKL , 0xb3 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0x00 }, + { STB0899_PCKLENUL , 0xbc }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xbd }, + { STB0899_TSSTATUS , 0x90 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x95 }, + { STB0899_ERRCTRL3 , 0x8d }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x19 }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0xf0 }, + { STB0899_MATSTRL , 0x02 }, + { STB0899_UPLSTRM , 0x45 }, + { STB0899_UPLSTRL , 0x60 }, + { STB0899_DFLSTRM , 0xe3 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x47 }, + { STB0899_SYNCDSTRM , 0x05 }, + { STB0899_SYNCDSTRL , 0x18 }, + { STB0899_CFGPDELSTATUS1 , 0x19 }, + { STB0899_CFGPDELSTATUS2 , 0x2b }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x01 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + + + +struct stb0899_config az6027_stb0899_config = { + .init_dev = az6027_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = az6027_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .demod_address = 0xd0, /* 0x68, 0xd0 >> 1 */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL, +}; + +struct stb6100_config az6027_stb6100_config = { + .tuner_address = 0xc0, + .refclock = 27000000, +}; + + +/* check for mutex FIXME */ +int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) +{ + int ret = -1; + if (mutex_lock_interruptible(&d->usb_mutex)) + return -EAGAIN; + + ret = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_IN, + value, + index, + b, + blen, + 2000); + + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else + ret = 0; + + deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); + debug_dump(b, blen, deb_xfer); + + mutex_unlock(&d->usb_mutex); + return ret; +} + +static int az6027_usb_out_op(struct dvb_usb_device *d, + u8 req, + u16 value, + u16 index, + u8 *b, + int blen) +{ + int ret; + + deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index); + debug_dump(b, blen, deb_xfer); + + if (mutex_lock_interruptible(&d->usb_mutex)) + return -EAGAIN; + + ret = usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_OUT, + value, + index, + b, + blen, + 2000); + + if (ret != blen) { + warn("usb out operation failed. (%d)", ret); + mutex_unlock(&d->usb_mutex); + return -EIO; + } else{ + mutex_unlock(&d->usb_mutex); + return 0; + } +} + +static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + deb_info("%s %d", __func__, onoff); + + req = 0xBC; + value = onoff; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + warn("usb out operation failed. (%d)", ret); + + return ret; +} + +/* keys for the enclosed remote control */ +static struct rc_map_table rc_map_az6027_table[] = { + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, +}; + +/* remote control stuff (does not work with my box) */ +static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + return 0; +} + +/* +int az6027_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 v = onoff; + return az6027_usb_out_op(d,0xBC,v,3,NULL,1); +} +*/ + +static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + if (slot != 0) + return -EINVAL; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); + + req = 0xC1; + value = address; + index = 0; + blen = 1; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + ret = b[0]; + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + +static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, + int address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + deb_info("%s %d", __func__, slot); + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC2; + value1 = address; + index = value; + blen = 0; + + ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); + if (ret != 0) + warn("usb out operation failed. (%d)", ret); + + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + if (slot != 0) + return -EINVAL; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); + + req = 0xC3; + value = address; + index = 0; + blen = 2; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EINVAL; + } else { + if (b[0] == 0) + warn("Read CI IO error"); + + ret = b[1]; + deb_info("read cam data = %x from 0x%x", b[1], value); + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + +static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address, + u8 value) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value1; + u16 index; + int blen; + + if (slot != 0) + return -EINVAL; + + mutex_lock(&state->ca_mutex); + req = 0xC4; + value1 = address; + index = value; + blen = 0; + + ret = az6027_usb_out_op(d, req, value1, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + + req = 0xC8; + value = 0; + index = 0; + blen = 1; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else{ + ret = b[0]; + } + kfree(b); + return ret; +} + +static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret, i; + u8 req; + u16 value; + u16 index; + int blen; + + mutex_lock(&state->ca_mutex); + + req = 0xC6; + value = 1; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + msleep(500); + req = 0xC6; + value = 0; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + + for (i = 0; i < 15; i++) { + msleep(100); + + if (CI_CamReady(ca, slot)) { + deb_info("CAM Ready"); + break; + } + } + msleep(5000); + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + return 0; +} + +static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + deb_info("%s", __func__); + mutex_lock(&state->ca_mutex); + req = 0xC7; + value = 1; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(d, req, value, index, NULL, blen); + if (ret != 0) { + warn("usb out operation failed. (%d)", ret); + goto failed; + } + +failed: + mutex_unlock(&state->ca_mutex); + return ret; +} + +static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + int ret; + u8 req; + u16 value; + u16 index; + int blen; + u8 *b; + + b = kmalloc(12, GFP_KERNEL); + if (!b) + return -ENOMEM; + mutex_lock(&state->ca_mutex); + + req = 0xC5; + value = 0; + index = 0; + blen = 1; + + ret = az6027_usb_in_op(d, req, value, index, b, blen); + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else + ret = 0; + + if (!ret && b[0] == 1) { + ret = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + } + + mutex_unlock(&state->ca_mutex); + kfree(b); + return ret; +} + + +static void az6027_ci_uninit(struct dvb_usb_device *d) +{ + struct az6027_device_state *state; + + deb_info("%s", __func__); + + if (NULL == d) + return; + + state = (struct az6027_device_state *)d->priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + + memset(&state->ca, 0, sizeof(state->ca)); +} + + +static int az6027_ci_init(struct dvb_usb_adapter *a) +{ + struct dvb_usb_device *d = a->dev; + struct az6027_device_state *state = (struct az6027_device_state *)d->priv; + int ret; + + deb_info("%s", __func__); + + mutex_init(&state->ca_mutex); + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = az6027_ci_read_attribute_mem; + state->ca.write_attribute_mem = az6027_ci_write_attribute_mem; + state->ca.read_cam_control = az6027_ci_read_cam_control; + state->ca.write_cam_control = az6027_ci_write_cam_control; + state->ca.slot_reset = az6027_ci_slot_reset; + state->ca.slot_shutdown = az6027_ci_slot_shutdown; + state->ca.slot_ts_enable = az6027_ci_slot_ts_enable; + state->ca.poll_slot_status = az6027_ci_poll_slot_status; + state->ca.data = d; + + ret = dvb_ca_en50221_init(&a->dvb_adap, + &state->ca, + 0, /* flags */ + 1);/* n_slots */ + if (ret != 0) { + err("Cannot initialize CI: Error %d.", ret); + memset(&state->ca, 0, sizeof(state->ca)); + return ret; + } + + deb_info("CI initialized."); + + return 0; +} + +/* +static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6]) +{ + az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6); + return 0; +} +*/ + +static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + + u8 buf; + struct dvb_usb_adapter *adap = fe->dvb->priv; + + struct i2c_msg i2c_msg = { + .addr = 0x99, + .flags = 0, + .buf = &buf, + .len = 1 + }; + + /* + * 2 --18v + * 1 --13v + * 0 --off + */ + switch (voltage) { + case SEC_VOLTAGE_13: + buf = 1; + i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + break; + + case SEC_VOLTAGE_18: + buf = 2; + i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + break; + + case SEC_VOLTAGE_OFF: + buf = 0; + i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1); + break; + + default: + return -EINVAL; + } + return 0; +} + + +static int az6027_frontend_poweron(struct dvb_usb_adapter *adap) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + req = 0xBC; + value = 1; /* power on */ + index = 3; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + return 0; +} +static int az6027_frontend_reset(struct dvb_usb_adapter *adap) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + /* reset demodulator */ + req = 0xC0; + value = 1; /* high */ + index = 3; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + req = 0xC0; + value = 0; /* low */ + index = 3; + blen = 0; + msleep_interruptible(200); + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + msleep_interruptible(200); + + req = 0xC0; + value = 1; /*high */ + index = 3; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + msleep_interruptible(200); + return 0; +} + +static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + u8 req; + u16 value; + u16 index; + int blen; + + /* TS passthrough */ + req = 0xC7; + value = onoff; + index = 0; + blen = 0; + + ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen); + if (ret != 0) + return -EIO; + + return 0; +} + +static int az6027_frontend_attach(struct dvb_usb_adapter *adap) +{ + + az6027_frontend_poweron(adap); + az6027_frontend_reset(adap); + + deb_info("adap = %p, dev = %p\n", adap, adap->dev); + adap->fe_adap[0].fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap); + + if (adap->fe_adap[0].fe) { + deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address); + if (stb6100_attach(adap->fe_adap[0].fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) { + deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address); + adap->fe_adap[0].fe->ops.set_voltage = az6027_set_voltage; + az6027_ci_init(adap); + } else { + adap->fe_adap[0].fe = NULL; + } + } else + warn("no front-end attached\n"); + + az6027_frontend_tsbypass(adap, 0); + + return 0; +} + +static struct dvb_usb_device_properties az6027_properties; + +static void az6027_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + az6027_ci_uninit(d); + dvb_usb_device_exit(intf); +} + + +static int az6027_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, + &az6027_properties, + THIS_MODULE, + NULL, + adapter_nr); +} + +/* I2C */ +static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i = 0, j = 0, len = 0; + u16 index; + u16 value; + int length; + u8 req; + u8 *data; + + data = kmalloc(256, GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) { + kfree(data); + return -EAGAIN; + } + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + + if (msg[i].addr == 0x99) { + req = 0xBE; + index = 0; + value = msg[i].buf[0] & 0x00ff; + length = 1; + az6027_usb_out_op(d, req, value, index, data, length); + } + + if (msg[i].addr == 0xd0) { + /* write/read request */ + if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { + req = 0xB9; + index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); + value = msg[i].addr + (msg[i].len << 8); + length = msg[i + 1].len + 6; + az6027_usb_in_op(d, req, value, index, data, length); + len = msg[i + 1].len; + for (j = 0; j < len; j++) + msg[i + 1].buf[j] = data[j + 5]; + + i++; + } else { + + /* demod 16bit addr */ + req = 0xBD; + index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff)); + value = msg[i].addr + (2 << 8); + length = msg[i].len - 2; + len = msg[i].len - 2; + for (j = 0; j < len; j++) + data[j] = msg[i].buf[j + 2]; + az6027_usb_out_op(d, req, value, index, data, length); + } + } + + if (msg[i].addr == 0xc0) { + if (msg[i].flags & I2C_M_RD) { + + req = 0xB9; + index = 0x0; + value = msg[i].addr; + length = msg[i].len + 6; + az6027_usb_in_op(d, req, value, index, data, length); + len = msg[i].len; + for (j = 0; j < len; j++) + msg[i].buf[j] = data[j + 5]; + + } else { + + req = 0xBD; + index = msg[i].buf[0] & 0x00FF; + value = msg[i].addr + (1 << 8); + length = msg[i].len - 1; + len = msg[i].len - 1; + + for (j = 0; j < len; j++) + data[j] = msg[i].buf[j + 1]; + + az6027_usb_out_op(d, req, value, index, data, length); + } + } + } + mutex_unlock(&d->i2c_mutex); + kfree(data); + + return i; +} + + +static u32 az6027_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm az6027_i2c_algo = { + .master_xfer = az6027_i2c_xfer, + .functionality = az6027_i2c_func, +}; + +int az6027_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + u8 *b; + s16 ret; + + b = kmalloc(16, GFP_KERNEL); + if (!b) + return -ENOMEM; + + ret = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + 0xb7, + USB_TYPE_VENDOR | USB_DIR_IN, + 6, + 0, + b, + 6, + USB_CTRL_GET_TIMEOUT); + + *cold = ret <= 0; + kfree(b); + deb_info("cold: %d\n", *cold); + return 0; +} + + +static struct usb_device_id az6027_usb_table[] = { + { USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI_V1) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_DVBS2CI_V2) }, + { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V1) }, + { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V2) }, + { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_SAT) }, + { }, +}; + +MODULE_DEVICE_TABLE(usb, az6027_usb_table); + +static struct dvb_usb_device_properties az6027_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-az6027-03.fw", + .no_reconnect = 1, + + .size_of_priv = sizeof(struct az6027_device_state), + .identify_state = az6027_identify_state, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = az6027_streaming_ctrl, + .frontend_attach = az6027_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, +/* + .power_ctrl = az6027_power_ctrl, + .read_mac_address = az6027_read_mac_addr, + */ + .rc.legacy = { + .rc_map_table = rc_map_az6027_table, + .rc_map_size = ARRAY_SIZE(rc_map_az6027_table), + .rc_interval = 400, + .rc_query = az6027_rc_query, + }, + + .i2c_algo = &az6027_i2c_algo, + + .num_device_descs = 6, + .devices = { + { + .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)", + .cold_ids = { &az6027_usb_table[0], NULL }, + .warm_ids = { NULL }, + }, { + .name = "TERRATEC S7", + .cold_ids = { &az6027_usb_table[1], NULL }, + .warm_ids = { NULL }, + }, { + .name = "TERRATEC S7 MKII", + .cold_ids = { &az6027_usb_table[2], NULL }, + .warm_ids = { NULL }, + }, { + .name = "Technisat SkyStar USB 2 HD CI", + .cold_ids = { &az6027_usb_table[3], NULL }, + .warm_ids = { NULL }, + }, { + .name = "Technisat SkyStar USB 2 HD CI", + .cold_ids = { &az6027_usb_table[4], NULL }, + .warm_ids = { NULL }, + }, { + .name = "Elgato EyeTV Sat", + .cold_ids = { &az6027_usb_table[5], NULL }, + .warm_ids = { NULL }, + }, + { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver az6027_usb_driver = { + .name = "dvb_usb_az6027", + .probe = az6027_usb_probe, + .disconnect = az6027_usb_disconnect, + .id_table = az6027_usb_table, +}; + +module_usb_driver(az6027_usb_driver); + +MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>"); +MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/az6027.h b/drivers/media/usb/dvb-usb/az6027.h new file mode 100644 index 000000000000..f3afe17f3f3d --- /dev/null +++ b/drivers/media/usb/dvb-usb/az6027.h @@ -0,0 +1,14 @@ +#ifndef _DVB_USB_VP6027_H_ +#define _DVB_USB_VP6027_H_ + +#define DVB_USB_LOG_PREFIX "az6027" +#include "dvb-usb.h" + + +extern int dvb_usb_az6027_debug; +#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_az6027_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_az6027_debug, 0x08, args) + +#endif diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c new file mode 100644 index 000000000000..0a98548ecd17 --- /dev/null +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -0,0 +1,254 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and + * Holger Waechtler <holger@qanu.de> + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "cinergyT2.h" + + +/* debug */ +int dvb_usb_cinergyt2_debug; + +module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 " + "(or-able))."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct cinergyt2_state { + u8 rc_counter; +}; + +/* We are missing a release hook with usb_device data */ +static struct dvb_usb_device *cinergyt2_usb_device; + +static struct dvb_usb_device_properties cinergyt2_properties; + +static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) +{ + char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; + char result[64]; + return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result, + sizeof(result), 0); +} + +static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) +{ + char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 }; + char state[3]; + return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0); +} + +static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) +{ + char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION }; + char state[3]; + int ret; + + adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); + + ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state, + sizeof(state), 0); + if (ret < 0) { + deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " + "state info\n"); + } + + /* Copy this pointer as we are gonna need it in the release phase */ + cinergyt2_usb_device = adap->dev; + + return 0; +} + +static struct rc_map_table rc_map_cinergyt2_table[] = { + { 0x0401, KEY_POWER }, + { 0x0402, KEY_1 }, + { 0x0403, KEY_2 }, + { 0x0404, KEY_3 }, + { 0x0405, KEY_4 }, + { 0x0406, KEY_5 }, + { 0x0407, KEY_6 }, + { 0x0408, KEY_7 }, + { 0x0409, KEY_8 }, + { 0x040a, KEY_9 }, + { 0x040c, KEY_0 }, + { 0x040b, KEY_VIDEO }, + { 0x040d, KEY_REFRESH }, + { 0x040e, KEY_SELECT }, + { 0x040f, KEY_EPG }, + { 0x0410, KEY_UP }, + { 0x0414, KEY_DOWN }, + { 0x0411, KEY_LEFT }, + { 0x0413, KEY_RIGHT }, + { 0x0412, KEY_OK }, + { 0x0415, KEY_TEXT }, + { 0x0416, KEY_INFO }, + { 0x0417, KEY_RED }, + { 0x0418, KEY_GREEN }, + { 0x0419, KEY_YELLOW }, + { 0x041a, KEY_BLUE }, + { 0x041c, KEY_VOLUMEUP }, + { 0x041e, KEY_VOLUMEDOWN }, + { 0x041d, KEY_MUTE }, + { 0x041b, KEY_CHANNELUP }, + { 0x041f, KEY_CHANNELDOWN }, + { 0x0440, KEY_PAUSE }, + { 0x044c, KEY_PLAY }, + { 0x0458, KEY_RECORD }, + { 0x0454, KEY_PREVIOUS }, + { 0x0448, KEY_STOP }, + { 0x045c, KEY_NEXT } +}; + +/* Number of keypresses to ignore before detect repeating */ +#define RC_REPEAT_DELAY 3 + +static int repeatable_keys[] = { + KEY_UP, + KEY_DOWN, + KEY_LEFT, + KEY_RIGHT, + KEY_VOLUMEUP, + KEY_VOLUMEDOWN, + KEY_CHANNELUP, + KEY_CHANNELDOWN +}; + +static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct cinergyt2_state *st = d->priv; + u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; + int i; + + *state = REMOTE_NO_KEY_PRESSED; + + dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); + if (key[4] == 0xff) { + /* key repeat */ + st->rc_counter++; + if (st->rc_counter > RC_REPEAT_DELAY) { + for (i = 0; i < ARRAY_SIZE(repeatable_keys); i++) { + if (d->last_event == repeatable_keys[i]) { + *state = REMOTE_KEY_REPEAT; + *event = d->last_event; + deb_rc("repeat key, event %x\n", + *event); + return 0; + } + } + deb_rc("repeated key (non repeatable)\n"); + } + return 0; + } + + /* hack to pass checksum on the custom field */ + key[2] = ~key[1]; + dvb_usb_nec_rc_key_to_event(d, key, event, state); + if (key[0] != 0) { + if (*event != d->last_event) + st->rc_counter = 0; + + deb_rc("key: %x %x %x %x %x\n", + key[0], key[1], key[2], key[3], key[4]); + } + return 0; +} + +static int cinergyt2_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, NULL, adapter_nr); +} + + +static struct usb_device_id cinergyt2_usb_table[] = { + { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, + { 0 } +}; + +MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table); + +static struct dvb_usb_device_properties cinergyt2_properties = { + .size_of_priv = sizeof(struct cinergyt2_state), + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cinergyt2_streaming_ctrl, + .frontend_attach = cinergyt2_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + }}, + } + }, + + .power_ctrl = cinergyt2_power_ctrl, + + .rc.legacy = { + .rc_interval = 50, + .rc_map_table = rc_map_cinergyt2_table, + .rc_map_size = ARRAY_SIZE(rc_map_cinergyt2_table), + .rc_query = cinergyt2_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 1, + + .num_device_descs = 1, + .devices = { + { .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver", + .cold_ids = {NULL}, + .warm_ids = { &cinergyt2_usb_table[0], NULL }, + }, + { NULL }, + } +}; + + +static struct usb_driver cinergyt2_driver = { + .name = "cinergyT2", + .probe = cinergyt2_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = cinergyt2_usb_table +}; + +module_usb_driver(cinergyt2_driver); + +MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tomi Orava"); diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c new file mode 100644 index 000000000000..1efc028a76c9 --- /dev/null +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c @@ -0,0 +1,356 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and + * Holger Waechtler <holger@qanu.de> + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "cinergyT2.h" + + +/** + * convert linux-dvb frontend parameter set into TPS. + * See ETSI ETS-300744, section 4.6.2, table 9 for details. + * + * This function is probably reusable and may better get placed in a support + * library. + * + * We replace errornous fields by default TPS fields (the ones with value 0). + */ + +static uint16_t compute_tps(struct dtv_frontend_properties *op) +{ + uint16_t tps = 0; + + switch (op->code_rate_HP) { + case FEC_2_3: + tps |= (1 << 7); + break; + case FEC_3_4: + tps |= (2 << 7); + break; + case FEC_5_6: + tps |= (3 << 7); + break; + case FEC_7_8: + tps |= (4 << 7); + break; + case FEC_1_2: + case FEC_AUTO: + default: + /* tps |= (0 << 7) */; + } + + switch (op->code_rate_LP) { + case FEC_2_3: + tps |= (1 << 4); + break; + case FEC_3_4: + tps |= (2 << 4); + break; + case FEC_5_6: + tps |= (3 << 4); + break; + case FEC_7_8: + tps |= (4 << 4); + break; + case FEC_1_2: + case FEC_AUTO: + default: + /* tps |= (0 << 4) */; + } + + switch (op->modulation) { + case QAM_16: + tps |= (1 << 13); + break; + case QAM_64: + tps |= (2 << 13); + break; + case QPSK: + default: + /* tps |= (0 << 13) */; + } + + switch (op->transmission_mode) { + case TRANSMISSION_MODE_8K: + tps |= (1 << 0); + break; + case TRANSMISSION_MODE_2K: + default: + /* tps |= (0 << 0) */; + } + + switch (op->guard_interval) { + case GUARD_INTERVAL_1_16: + tps |= (1 << 2); + break; + case GUARD_INTERVAL_1_8: + tps |= (2 << 2); + break; + case GUARD_INTERVAL_1_4: + tps |= (3 << 2); + break; + case GUARD_INTERVAL_1_32: + default: + /* tps |= (0 << 2) */; + } + + switch (op->hierarchy) { + case HIERARCHY_1: + tps |= (1 << 10); + break; + case HIERARCHY_2: + tps |= (2 << 10); + break; + case HIERARCHY_4: + tps |= (3 << 10); + break; + case HIERARCHY_NONE: + default: + /* tps |= (0 << 10) */; + } + + return tps; +} + +struct cinergyt2_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; +}; + +static int cinergyt2_fe_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg result; + u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result, + sizeof(result), 0); + if (ret < 0) + return ret; + + *status = 0; + + if (0xffff - le16_to_cpu(result.gain) > 30) + *status |= FE_HAS_SIGNAL; + if (result.lock_bits & (1 << 6)) + *status |= FE_HAS_LOCK; + if (result.lock_bits & (1 << 5)) + *status |= FE_HAS_SYNC; + if (result.lock_bits & (1 << 4)) + *status |= FE_HAS_CARRIER; + if (result.lock_bits & (1 << 1)) + *status |= FE_HAS_VITERBI; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) + return ret; + + *ber = le32_to_cpu(status.viterbi_error_rate); + return 0; +} + +static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n", + ret); + return ret; + } + *unc = le32_to_cpu(status.uncorrected_block_count); + return 0; +} + +static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_signal_strength() Failed!" + " (Error=%d)\n", ret); + return ret; + } + *strength = (0xffff - le16_to_cpu(status.gain)); + return 0; +} + +static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_get_status_msg status; + char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; + int ret; + + ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, + sizeof(status), 0); + if (ret < 0) { + err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret); + return ret; + } + *snr = (status.snr << 8) | status.snr; + return 0; +} + +static int cinergyt2_fe_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int cinergyt2_fe_sleep(struct dvb_frontend *fe) +{ + deb_info("cinergyt2_fe_sleep() Called\n"); + return 0; +} + +static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct cinergyt2_fe_state *state = fe->demodulator_priv; + struct dvbt_set_parameters_msg param; + char result[2]; + int err; + + param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; + param.tps = cpu_to_le16(compute_tps(fep)); + param.freq = cpu_to_le32(fep->frequency / 1000); + param.flags = 0; + + switch (fep->bandwidth_hz) { + default: + case 8000000: + param.bandwidth = 8; + break; + case 7000000: + param.bandwidth = 7; + break; + case 6000000: + param.bandwidth = 6; + break; + } + + err = dvb_usb_generic_rw(state->d, + (char *)¶m, sizeof(param), + result, sizeof(result), 0); + if (err < 0) + err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); + + return (err < 0) ? err : 0; +} + +static void cinergyt2_fe_release(struct dvb_frontend *fe) +{ + struct cinergyt2_fe_state *state = fe->demodulator_priv; + if (state != NULL) + kfree(state); +} + +static struct dvb_frontend_ops cinergyt2_fe_ops; + +struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) +{ + struct cinergyt2_fe_state *s = kzalloc(sizeof( + struct cinergyt2_fe_state), GFP_KERNEL); + if (s == NULL) + return NULL; + + s->d = d; + memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); + s->fe.demodulator_priv = s; + return &s->fe; +} + + +static struct dvb_frontend_ops cinergyt2_fe_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = DRIVER_NAME, + .frequency_min = 174000000, + .frequency_max = 862000000, + .frequency_stepsize = 166667, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 + | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 + | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 + | FE_CAN_FEC_AUTO | FE_CAN_QPSK + | FE_CAN_QAM_16 | FE_CAN_QAM_64 + | FE_CAN_QAM_AUTO + | FE_CAN_TRANSMISSION_MODE_AUTO + | FE_CAN_GUARD_INTERVAL_AUTO + | FE_CAN_HIERARCHY_AUTO + | FE_CAN_RECOVER + | FE_CAN_MUTE_TS + }, + + .release = cinergyt2_fe_release, + + .init = cinergyt2_fe_init, + .sleep = cinergyt2_fe_sleep, + + .set_frontend = cinergyt2_fe_set_frontend, + .get_tune_settings = cinergyt2_fe_get_tune_settings, + + .read_status = cinergyt2_fe_read_status, + .read_ber = cinergyt2_fe_read_ber, + .read_signal_strength = cinergyt2_fe_read_signal_strength, + .read_snr = cinergyt2_fe_read_snr, + .read_ucblocks = cinergyt2_fe_read_unc_blocks, +}; diff --git a/drivers/media/usb/dvb-usb/cinergyT2.h b/drivers/media/usb/dvb-usb/cinergyT2.h new file mode 100644 index 000000000000..84efe03771eb --- /dev/null +++ b/drivers/media/usb/dvb-usb/cinergyT2.h @@ -0,0 +1,95 @@ +/* + * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. + * + * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) + * + * Based on the dvb-usb-framework code and the + * original Terratec Cinergy T2 driver by: + * + * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and + * Holger Waechtler <holger@qanu.de> + * + * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _DVB_USB_CINERGYT2_H_ +#define _DVB_USB_CINERGYT2_H_ + +#include <linux/usb/input.h> + +#define DVB_USB_LOG_PREFIX "cinergyT2" +#include "dvb-usb.h" + +#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" + +extern int dvb_usb_cinergyt2_debug; + +#define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args) +#define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args) +#define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args) +#define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args) +#define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args) +#define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args) +#define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args) +#define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args) +#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args) + + + +enum cinergyt2_ep1_cmd { + CINERGYT2_EP1_PID_TABLE_RESET = 0x01, + CINERGYT2_EP1_PID_SETUP = 0x02, + CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, + CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, + CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, + CINERGYT2_EP1_START_SCAN = 0x06, + CINERGYT2_EP1_CONTINUE_SCAN = 0x07, + CINERGYT2_EP1_GET_RC_EVENTS = 0x08, + CINERGYT2_EP1_SLEEP_MODE = 0x09, + CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A +}; + + +struct dvbt_get_status_msg { + uint32_t freq; + uint8_t bandwidth; + uint16_t tps; + uint8_t flags; + __le16 gain; + uint8_t snr; + __le32 viterbi_error_rate; + uint32_t rs_error_rate; + __le32 uncorrected_block_count; + uint8_t lock_bits; + uint8_t prev_lock_bits; +} __attribute__((packed)); + + +struct dvbt_set_parameters_msg { + uint8_t cmd; + __le32 freq; + uint8_t bandwidth; + __le16 tps; + uint8_t flags; +} __attribute__((packed)); + + +extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d); + +#endif /* _DVB_USB_CINERGYT2_H_ */ + diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c new file mode 100644 index 000000000000..3940bb0f9ef6 --- /dev/null +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -0,0 +1,2043 @@ +/* DVB USB compliant linux driver for Conexant USB reference design. + * + * The Conexant reference design I saw on their website was only for analogue + * capturing (using the cx25842). The box I took to write this driver (reverse + * engineered) is the one labeled Medion MD95700. In addition to the cx25842 + * for analogue capturing it also has a cx22702 DVB-T demodulator on the main + * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. + * + * Maybe it is a little bit premature to call this driver cxusb, but I assume + * the USB protocol is identical or at least inherited from the reference + * design, so it can be reused for the "analogue-only" device (if it will + * appear at all). + * + * TODO: Use the cx25840-driver for the analogue part + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) + * Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org) + * Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include <media/tuner.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> + +#include "cxusb.h" + +#include "cx22702.h" +#include "lgdt330x.h" +#include "mt352.h" +#include "mt352_priv.h" +#include "zl10353.h" +#include "tuner-xc2028.h" +#include "tuner-simple.h" +#include "mxl5005s.h" +#include "max2165.h" +#include "dib7000p.h" +#include "dib0070.h" +#include "lgs8gxx.h" +#include "atbm8830.h" + +/* debug */ +static int dvb_usb_cxusb_debug; +module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define deb_info(args...) dprintk(dvb_usb_cxusb_debug, 0x03, args) +#define deb_i2c(args...) dprintk(dvb_usb_cxusb_debug, 0x02, args) + +static int cxusb_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 sndbuf[1+wlen]; + memset(sndbuf, 0, 1+wlen); + + sndbuf[0] = cmd; + memcpy(&sndbuf[1], wbuf, wlen); + if (wo) + return dvb_usb_generic_write(d, sndbuf, 1+wlen); + else + return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0); +} + +/* GPIO */ +static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) +{ + struct cxusb_state *st = d->priv; + u8 o[2], i; + + if (st->gpio_write_state[GPIO_TUNER] == onoff) + return; + + o[0] = GPIO_TUNER; + o[1] = onoff; + cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); + + if (i != 0x01) + deb_info("gpio_write failed.\n"); + + st->gpio_write_state[GPIO_TUNER] = onoff; +} + +static int cxusb_bluebird_gpio_rw(struct dvb_usb_device *d, u8 changemask, + u8 newval) +{ + u8 o[2], gpio_state; + int rc; + + o[0] = 0xff & ~changemask; /* mask of bits to keep */ + o[1] = newval & changemask; /* new values for bits */ + + rc = cxusb_ctrl_msg(d, CMD_BLUEBIRD_GPIO_RW, o, 2, &gpio_state, 1); + if (rc < 0 || (gpio_state & changemask) != (newval & changemask)) + deb_info("bluebird_gpio_write failed.\n"); + + return rc < 0 ? rc : gpio_state; +} + +static void cxusb_bluebird_gpio_pulse(struct dvb_usb_device *d, u8 pin, int low) +{ + cxusb_bluebird_gpio_rw(d, pin, low ? 0 : pin); + msleep(5); + cxusb_bluebird_gpio_rw(d, pin, low ? pin : 0); +} + +static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff) +{ + cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40); +} + +static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, + u8 addr, int onoff) +{ + u8 o[2] = {addr, onoff}; + u8 i; + int rc; + + rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); + + if (rc < 0) + return rc; + if (i == 0x01) + return 0; + else { + deb_info("gpio_write failed.\n"); + return -EIO; + } +} + +/* I2C */ +static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + + if (d->udev->descriptor.idVendor == USB_VID_MEDION) + switch (msg[i].addr) { + case 0x63: + cxusb_gpio_tuner(d, 0); + break; + default: + cxusb_gpio_tuner(d, 1); + break; + } + + if (msg[i].flags & I2C_M_RD) { + /* read only */ + u8 obuf[3], ibuf[1+msg[i].len]; + obuf[0] = 0; + obuf[1] = msg[i].len; + obuf[2] = msg[i].addr; + if (cxusb_ctrl_msg(d, CMD_I2C_READ, + obuf, 3, + ibuf, 1+msg[i].len) < 0) { + warn("i2c read failed"); + break; + } + memcpy(msg[i].buf, &ibuf[1], msg[i].len); + } else if (i+1 < num && (msg[i+1].flags & I2C_M_RD) && + msg[i].addr == msg[i+1].addr) { + /* write to then read from same address */ + u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len]; + obuf[0] = msg[i].len; + obuf[1] = msg[i+1].len; + obuf[2] = msg[i].addr; + memcpy(&obuf[3], msg[i].buf, msg[i].len); + + if (cxusb_ctrl_msg(d, CMD_I2C_READ, + obuf, 3+msg[i].len, + ibuf, 1+msg[i+1].len) < 0) + break; + + if (ibuf[0] != 0x08) + deb_i2c("i2c read may have failed\n"); + + memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len); + + i++; + } else { + /* write only */ + u8 obuf[2+msg[i].len], ibuf; + obuf[0] = msg[i].addr; + obuf[1] = msg[i].len; + memcpy(&obuf[2], msg[i].buf, msg[i].len); + + if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf, + 2+msg[i].len, &ibuf,1) < 0) + break; + if (ibuf != 0x08) + deb_i2c("i2c write may have failed\n"); + } + } + + mutex_unlock(&d->i2c_mutex); + return i == num ? num : -EREMOTEIO; +} + +static u32 cxusb_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm cxusb_i2c_algo = { + .master_xfer = cxusb_i2c_xfer, + .functionality = cxusb_i2c_func, +}; + +static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b = 0; + if (onoff) + return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); + else + return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0); +} + +static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + if (!onoff) + return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0); + if (d->state == DVB_USB_STATE_INIT && + usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) && + !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) && + !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0); + if (!ret) { + /* FIXME: We don't know why, but we need to configure the + * lgdt3303 with the register settings below on resume */ + int i; + u8 buf, bufs[] = { + 0x0e, 0x2, 0x00, 0x7f, + 0x0e, 0x2, 0x02, 0xfe, + 0x0e, 0x2, 0x02, 0x01, + 0x0e, 0x2, 0x00, 0x03, + 0x0e, 0x2, 0x0d, 0x40, + 0x0e, 0x2, 0x0e, 0x87, + 0x0e, 0x2, 0x0f, 0x8e, + 0x0e, 0x2, 0x10, 0x01, + 0x0e, 0x2, 0x14, 0xd7, + 0x0e, 0x2, 0x47, 0x88, + }; + msleep(20); + for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) { + ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE, + bufs+i, 4, &buf, 1); + if (ret) + break; + if (buf != 0x8) + return -EREMOTEIO; + } + } + return ret; +} + +static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b = 0; + if (onoff) + return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0); + else + return 0; +} + +static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int rc = 0; + + rc = cxusb_power_ctrl(d, onoff); + if (!onoff) + cxusb_nano2_led(d, 0); + + return rc; +} + +static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + u8 b; + ret = cxusb_power_ctrl(d, onoff); + if (!onoff) + return ret; + + msleep(128); + cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1); + msleep(100); + return ret; +} + +static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 buf[2] = { 0x03, 0x00 }; + if (onoff) + cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, buf, 2, NULL, 0); + else + cxusb_ctrl_msg(adap->dev, CMD_STREAMING_OFF, NULL, 0, NULL, 0); + + return 0; +} + +static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + if (onoff) + cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0); + else + cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF, + NULL, 0, NULL, 0); + return 0; +} + +static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) +{ + int ep = d->props.generic_bulk_ctrl_endpoint; + const int timeout = 100; + const int junk_len = 32; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, ep), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d) +{ + struct usb_data_stream_properties *p = &d->props.adapter[0].fe[0].stream; + const int timeout = 100; + const int junk_len = p->u.bulk.buffersize; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, p->endpoint), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static int cxusb_d680_dmb_streaming_ctrl( + struct dvb_usb_adapter *adap, int onoff) +{ + if (onoff) { + u8 buf[2] = { 0x03, 0x00 }; + cxusb_d680_dmb_drain_video(adap->dev); + return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, + buf, sizeof(buf), NULL, 0); + } else { + int ret = cxusb_ctrl_msg(adap->dev, + CMD_STREAMING_OFF, NULL, 0, NULL, 0); + return ret; + } +} + +static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; + u8 ircode[4]; + int i; + + cxusb_ctrl_msg(d, CMD_GET_IR_CODE, NULL, 0, ircode, 4); + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { + if (rc5_custom(&keymap[i]) == ircode[2] && + rc5_data(&keymap[i]) == ircode[3]) { + *event = keymap[i].keycode; + *state = REMOTE_KEY_PRESSED; + + return 0; + } + } + + return 0; +} + +static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; + u8 ircode[4]; + int i; + struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD, + .buf = ircode, .len = 4 }; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1) + return 0; + + for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { + if (rc5_custom(&keymap[i]) == ircode[1] && + rc5_data(&keymap[i]) == ircode[2]) { + *event = keymap[i].keycode; + *state = REMOTE_KEY_PRESSED; + + return 0; + } + } + + return 0; +} + +static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; + u8 ircode[2]; + int i; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0) + return 0; + + for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { + if (rc5_custom(&keymap[i]) == ircode[0] && + rc5_data(&keymap[i]) == ircode[1]) { + *event = keymap[i].keycode; + *state = REMOTE_KEY_PRESSED; + + return 0; + } + } + + return 0; +} + +static struct rc_map_table rc_map_dvico_mce_table[] = { + { 0xfe02, KEY_TV }, + { 0xfe0e, KEY_MP3 }, + { 0xfe1a, KEY_DVD }, + { 0xfe1e, KEY_FAVORITES }, + { 0xfe16, KEY_SETUP }, + { 0xfe46, KEY_POWER2 }, + { 0xfe0a, KEY_EPG }, + { 0xfe49, KEY_BACK }, + { 0xfe4d, KEY_MENU }, + { 0xfe51, KEY_UP }, + { 0xfe5b, KEY_LEFT }, + { 0xfe5f, KEY_RIGHT }, + { 0xfe53, KEY_DOWN }, + { 0xfe5e, KEY_OK }, + { 0xfe59, KEY_INFO }, + { 0xfe55, KEY_TAB }, + { 0xfe0f, KEY_PREVIOUSSONG },/* Replay */ + { 0xfe12, KEY_NEXTSONG }, /* Skip */ + { 0xfe42, KEY_ENTER }, /* Windows/Start */ + { 0xfe15, KEY_VOLUMEUP }, + { 0xfe05, KEY_VOLUMEDOWN }, + { 0xfe11, KEY_CHANNELUP }, + { 0xfe09, KEY_CHANNELDOWN }, + { 0xfe52, KEY_CAMERA }, + { 0xfe5a, KEY_TUNER }, /* Live */ + { 0xfe19, KEY_OPEN }, + { 0xfe0b, KEY_1 }, + { 0xfe17, KEY_2 }, + { 0xfe1b, KEY_3 }, + { 0xfe07, KEY_4 }, + { 0xfe50, KEY_5 }, + { 0xfe54, KEY_6 }, + { 0xfe48, KEY_7 }, + { 0xfe4c, KEY_8 }, + { 0xfe58, KEY_9 }, + { 0xfe13, KEY_ANGLE }, /* Aspect */ + { 0xfe03, KEY_0 }, + { 0xfe1f, KEY_ZOOM }, + { 0xfe43, KEY_REWIND }, + { 0xfe47, KEY_PLAYPAUSE }, + { 0xfe4f, KEY_FASTFORWARD }, + { 0xfe57, KEY_MUTE }, + { 0xfe0d, KEY_STOP }, + { 0xfe01, KEY_RECORD }, + { 0xfe4e, KEY_POWER }, +}; + +static struct rc_map_table rc_map_dvico_portable_table[] = { + { 0xfc02, KEY_SETUP }, /* Profile */ + { 0xfc43, KEY_POWER2 }, + { 0xfc06, KEY_EPG }, + { 0xfc5a, KEY_BACK }, + { 0xfc05, KEY_MENU }, + { 0xfc47, KEY_INFO }, + { 0xfc01, KEY_TAB }, + { 0xfc42, KEY_PREVIOUSSONG },/* Replay */ + { 0xfc49, KEY_VOLUMEUP }, + { 0xfc09, KEY_VOLUMEDOWN }, + { 0xfc54, KEY_CHANNELUP }, + { 0xfc0b, KEY_CHANNELDOWN }, + { 0xfc16, KEY_CAMERA }, + { 0xfc40, KEY_TUNER }, /* ATV/DTV */ + { 0xfc45, KEY_OPEN }, + { 0xfc19, KEY_1 }, + { 0xfc18, KEY_2 }, + { 0xfc1b, KEY_3 }, + { 0xfc1a, KEY_4 }, + { 0xfc58, KEY_5 }, + { 0xfc59, KEY_6 }, + { 0xfc15, KEY_7 }, + { 0xfc14, KEY_8 }, + { 0xfc17, KEY_9 }, + { 0xfc44, KEY_ANGLE }, /* Aspect */ + { 0xfc55, KEY_0 }, + { 0xfc07, KEY_ZOOM }, + { 0xfc0a, KEY_REWIND }, + { 0xfc08, KEY_PLAYPAUSE }, + { 0xfc4b, KEY_FASTFORWARD }, + { 0xfc5b, KEY_MUTE }, + { 0xfc04, KEY_STOP }, + { 0xfc56, KEY_RECORD }, + { 0xfc57, KEY_POWER }, + { 0xfc41, KEY_UNKNOWN }, /* INPUT */ + { 0xfc00, KEY_UNKNOWN }, /* HD */ +}; + +static struct rc_map_table rc_map_d680_dmb_table[] = { + { 0x0038, KEY_UNKNOWN }, /* TV/AV */ + { 0x080c, KEY_ZOOM }, + { 0x0800, KEY_0 }, + { 0x0001, KEY_1 }, + { 0x0802, KEY_2 }, + { 0x0003, KEY_3 }, + { 0x0804, KEY_4 }, + { 0x0005, KEY_5 }, + { 0x0806, KEY_6 }, + { 0x0007, KEY_7 }, + { 0x0808, KEY_8 }, + { 0x0009, KEY_9 }, + { 0x000a, KEY_MUTE }, + { 0x0829, KEY_BACK }, + { 0x0012, KEY_CHANNELUP }, + { 0x0813, KEY_CHANNELDOWN }, + { 0x002b, KEY_VOLUMEUP }, + { 0x082c, KEY_VOLUMEDOWN }, + { 0x0020, KEY_UP }, + { 0x0821, KEY_DOWN }, + { 0x0011, KEY_LEFT }, + { 0x0810, KEY_RIGHT }, + { 0x000d, KEY_OK }, + { 0x081f, KEY_RECORD }, + { 0x0017, KEY_PLAYPAUSE }, + { 0x0816, KEY_PLAYPAUSE }, + { 0x000b, KEY_STOP }, + { 0x0827, KEY_FASTFORWARD }, + { 0x0026, KEY_REWIND }, + { 0x081e, KEY_UNKNOWN }, /* Time Shift */ + { 0x000e, KEY_UNKNOWN }, /* Snapshot */ + { 0x082d, KEY_UNKNOWN }, /* Mouse Cursor */ + { 0x000f, KEY_UNKNOWN }, /* Minimize/Maximize */ + { 0x0814, KEY_UNKNOWN }, /* Shuffle */ + { 0x0025, KEY_POWER }, +}; + +static int cxusb_dee1601_demod_init(struct dvb_frontend* fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + + return 0; +} + +static int cxusb_mt352_demod_init(struct dvb_frontend* fe) +{ /* used in both lgz201 and th7579 */ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x29 }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x24, 0x20 }; + static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + return 0; +} + +static struct cx22702_config cxusb_cx22702_config = { + .demod_address = 0x63, + .output_mode = CX22702_PARALLEL_OUTPUT, +}; + +static struct lgdt330x_config cxusb_lgdt3303_config = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, +}; + +static struct lgdt330x_config cxusb_aver_lgdt3303_config = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .clock_polarity_flip = 2, +}; + +static struct mt352_config cxusb_dee1601_config = { + .demod_address = 0x0f, + .demod_init = cxusb_dee1601_demod_init, +}; + +static struct zl10353_config cxusb_zl10353_dee1601_config = { + .demod_address = 0x0f, + .parallel_ts = 1, +}; + +static struct mt352_config cxusb_mt352_config = { + /* used in both lgz201 and th7579 */ + .demod_address = 0x0f, + .demod_init = cxusb_mt352_demod_init, +}; + +static struct zl10353_config cxusb_zl10353_xc3028_config = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, + .parallel_ts = 1, +}; + +static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static struct mt352_config cxusb_mt352_xc3028_config = { + .demod_address = 0x0f, + .if2 = 4560, + .no_tuner = 1, + .demod_init = cxusb_mt352_demod_init, +}; + +/* FIXME: needs tweaking */ +static struct mxl5005s_config aver_a868r_tuner = { + .i2c_address = 0x63, + .if_freq = 6000000UL, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +/* FIXME: needs tweaking */ +static struct mxl5005s_config d680_dmb_tuner = { + .i2c_address = 0x63, + .if_freq = 36125000UL, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct max2165_config mygica_d689_max2165_cfg = { + .i2c_address = 0x60, + .osc_clk = 20 +}; + +/* Callbacks for DVB USB */ +static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3); + return 0; +} + +static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, + NULL, DVB_PLL_THOMSON_DTT7579); + return 0; +} + +static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_LG_Z201); + return 0; +} + +static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, + NULL, DVB_PLL_THOMSON_DTT7579); + return 0; +} + +static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, 0x61, TUNER_LG_TDVS_H06XF); + return 0; +} + +static int dvico_bluebird_xc2028_callback(void *ptr, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = ptr; + struct dvb_usb_device *d = adap->dev; + + switch (command) { + case XC2028_TUNER_RESET: + deb_info("%s: XC2028_TUNER_RESET %d\n", __func__, arg); + cxusb_bluebird_gpio_pulse(d, 0x01, 1); + break; + case XC2028_RESET_CLK: + deb_info("%s: XC2028_RESET_CLK %d\n", __func__, arg); + break; + default: + deb_info("%s: unknown command %d, arg %d\n", __func__, + command, arg); + return -EINVAL; + } + + return 0; +} + +static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &adap->dev->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + /* FIXME: generalize & move to common area */ + adap->fe_adap[0].fe->callback = dvico_bluebird_xc2028_callback; + + fe = dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &cfg); + if (fe == NULL || fe->ops.tuner_ops.set_config == NULL) + return -EIO; + + fe->ops.tuner_ops.set_config(fe, &ctl); + + return 0; +} + +static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, &aver_a868r_tuner); + return 0; +} + +static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + fe = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, &d680_dmb_tuner); + return (fe == NULL) ? -EIO : 0; +} + +static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + fe = dvb_attach(max2165_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, &mygica_d689_max2165_cfg); + return (fe == NULL) ? -EIO : 0; +} + +static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) +{ + u8 b; + if (usb_set_interface(adap->dev->udev, 0, 6) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1); + + adap->fe_adap[0].fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) + return 0; + + return -EIO; +} + +static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 7) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, + &cxusb_lgdt3303_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) + return 0; + + return -EIO; +} + +static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap) +{ + adap->fe_adap[0].fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config, + &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe != NULL) + return 0; + + return -EIO; +} + +static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap) +{ + /* used in both lgz201 and th7579 */ + if (usb_set_interface(adap->dev->udev, 0, 0) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_mt352_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) + return 0; + + return -EIO; +} + +static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 0) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + adap->fe_adap[0].fe = dvb_attach(mt352_attach, &cxusb_dee1601_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) + return 0; + + adap->fe_adap[0].fe = dvb_attach(zl10353_attach, + &cxusb_zl10353_dee1601_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) + return 0; + + return -EIO; +} + +static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap) +{ + u8 ircode[4]; + int i; + struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD, + .buf = ircode, .len = 4 }; + + if (usb_set_interface(adap->dev->udev, 0, 1) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + /* reset the tuner and demodulator */ + cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); + cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); + cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); + + adap->fe_adap[0].fe = + dvb_attach(zl10353_attach, + &cxusb_zl10353_xc3028_config_no_i2c_gate, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) == NULL) + return -EIO; + + /* try to determine if there is no IR decoder on the I2C bus */ + for (i = 0; adap->dev->props.rc.legacy.rc_map_table != NULL && i < 5; i++) { + msleep(20); + if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1) + goto no_IR; + if (ircode[0] == 0 && ircode[1] == 0) + continue; + if (ircode[2] + ircode[3] != 0xff) { +no_IR: + adap->dev->props.rc.legacy.rc_map_table = NULL; + info("No IR receiver detected on this device."); + break; + } + } + + return 0; +} + +static struct dibx000_agc_config dib7070_agc_config = { + .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + + /* + * P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 + */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + .inv_gain = 600, + .time_stabiliz = 10, + .alpha_level = 0, + .thlock = 118, + .wbd_inv = 0, + .wbd_ref = 3530, + .wbd_sel = 1, + .wbd_alpha = 5, + .agc1_max = 65535, + .agc1_min = 0, + .agc2_max = 65535, + .agc2_min = 0, + .agc1_pt1 = 0, + .agc1_pt2 = 40, + .agc1_pt3 = 183, + .agc1_slope1 = 206, + .agc1_slope2 = 255, + .agc2_pt1 = 72, + .agc2_pt2 = 152, + .agc2_slope1 = 88, + .agc2_slope2 = 90, + .alpha_mant = 17, + .alpha_exp = 27, + .beta_mant = 23, + .beta_exp = 51, + .perform_agc_softsplit = 0, +}; + +static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { + .internal = 60000, + .sampling = 15000, + .pll_prediv = 1, + .pll_ratio = 20, + .pll_range = 3, + .pll_reset = 1, + .pll_bypass = 0, + .enable_refdiv = 0, + .bypclk_div = 0, + .IO_CLK_en_core = 1, + .ADClkSrc = 1, + .modulo = 2, + /* refsel, sel, freq_15k */ + .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), + .ifreq = (0 << 25) | 0, + .timf = 20452225, + .xtal_hz = 12000000, +}; + +static struct dib7000p_config cxusb_dualdig4_rev2_config = { + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = 0xfcef, + .gpio_val = 0x0110, + + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, +}; + +static int cxusb_dualdig4_rev2_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 1) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &cxusb_dualdig4_rev2_config) < 0) { + printk(KERN_WARNING "Unable to enumerate dib7000p\n"); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &cxusb_dualdig4_rev2_config); + if (adap->fe_adap[0].fe == NULL) + return -EIO; + + return 0; +} + +static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib7000p_set_gpio(fe, 8, 0, !onoff); +} + +static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return 0; +} + +static struct dib0070_config dib7070p_dib0070_config = { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, +}; + +struct dib0700_adapter_state { + int (*set_param_save) (struct dvb_frontend *); +}; + +static int dib7070_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + switch (band) { + case BAND_VHF: offset = 950; break; + default: + case BAND_UHF: offset = 550; break; + } + + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + + return state->set_param_save(fe); +} + +static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = + dib7000p_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, + &dib7070p_dib0070_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override; + return 0; +} + +static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 1) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0); + + /* reset the tuner and demodulator */ + cxusb_bluebird_gpio_rw(adap->dev, 0x04, 0); + cxusb_bluebird_gpio_pulse(adap->dev, 0x01, 1); + cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); + + adap->fe_adap[0].fe = dvb_attach(zl10353_attach, + &cxusb_zl10353_xc3028_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) + return 0; + + adap->fe_adap[0].fe = dvb_attach(mt352_attach, + &cxusb_mt352_xc3028_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) + return 0; + + return -EIO; +} + +static struct lgs8gxx_config d680_lgs8gl5_cfg = { + .prod = LGS8GXX_PROD_LGS8GL5, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 0, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 5725, /* 5.725 MHz */ + .if_neg_center = 0, + .ext_adc = 0, + .adc_signed = 0, + .if_neg_edge = 0, +}; + +static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + int n; + + /* Select required USB configuration */ + if (usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + + /* Unblock all USB pipes */ + usb_clear_halt(d->udev, + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint)); + + /* Drain USB pipes to avoid hang after reboot */ + for (n = 0; n < 5; n++) { + cxusb_d680_dmb_drain_message(d); + cxusb_d680_dmb_drain_video(d); + msleep(200); + } + + /* Reset the tuner */ + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { + err("clear tuner gpio failed"); + return -EIO; + } + msleep(100); + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { + err("set tuner gpio failed"); + return -EIO; + } + msleep(100); + + /* Attach frontend */ + adap->fe_adap[0].fe = dvb_attach(lgs8gxx_attach, &d680_lgs8gl5_cfg, &d->i2c_adap); + if (adap->fe_adap[0].fe == NULL) + return -EIO; + + return 0; +} + +static struct atbm8830_config mygica_d689_atbm8830_cfg = { + .prod = ATBM8830_PROD_8830, + .demod_address = 0x40, + .serial_ts = 0, + .ts_sampling_edge = 1, + .ts_clk_gated = 0, + .osc_clk_freq = 30400, /* in kHz */ + .if_freq = 0, /* zero IF */ + .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0x90, + .agc_hold_loop = 0, +}; + +static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + + /* Select required USB configuration */ + if (usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + + /* Unblock all USB pipes */ + usb_clear_halt(d->udev, + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.adapter[0].fe[0].stream.endpoint)); + + + /* Reset the tuner */ + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { + err("clear tuner gpio failed"); + return -EIO; + } + msleep(100); + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { + err("set tuner gpio failed"); + return -EIO; + } + msleep(100); + + /* Attach frontend */ + adap->fe_adap[0].fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg, + &d->i2c_adap); + if (adap->fe_adap[0].fe == NULL) + return -EIO; + + return 0; +} + +/* + * DViCO has shipped two devices with the same USB ID, but only one of them + * needs a firmware download. Check the device class details to see if they + * have non-default values to decide whether the device is actually cold or + * not, and forget a match if it turns out we selected the wrong device. + */ +static int bluebird_fx2_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int wascold = *cold; + + *cold = udev->descriptor.bDeviceClass == 0xff && + udev->descriptor.bDeviceSubClass == 0xff && + udev->descriptor.bDeviceProtocol == 0xff; + + if (*cold && !wascold) + *desc = NULL; + + return 0; +} + +/* + * DViCO bluebird firmware needs the "warm" product ID to be patched into the + * firmware file before download. + */ + +static const int dvico_firmware_id_offsets[] = { 6638, 3204 }; +static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, + const struct firmware *fw) +{ + int pos; + + for (pos = 0; pos < ARRAY_SIZE(dvico_firmware_id_offsets); pos++) { + int idoff = dvico_firmware_id_offsets[pos]; + + if (fw->size < idoff + 4) + continue; + + if (fw->data[idoff] == (USB_VID_DVICO & 0xff) && + fw->data[idoff + 1] == USB_VID_DVICO >> 8) { + struct firmware new_fw; + u8 *new_fw_data = vmalloc(fw->size); + int ret; + + if (!new_fw_data) + return -ENOMEM; + + memcpy(new_fw_data, fw->data, fw->size); + new_fw.size = fw->size; + new_fw.data = new_fw_data; + + new_fw_data[idoff + 2] = + le16_to_cpu(udev->descriptor.idProduct) + 1; + new_fw_data[idoff + 3] = + le16_to_cpu(udev->descriptor.idProduct) >> 8; + + ret = usb_cypress_load_firmware(udev, &new_fw, + CYPRESS_FX2); + vfree(new_fw_data); + return ret; + } + } + + return -EINVAL; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties cxusb_medion_properties; +static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties; +static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties; +static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties; +static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties; +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties; +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; +static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; +static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; +static struct dvb_usb_device_properties cxusb_aver_a868r_properties; +static struct dvb_usb_device_properties cxusb_d680_dmb_properties; +static struct dvb_usb_device_properties cxusb_mygica_d689_properties; + +static int cxusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, + &cxusb_bluebird_nano2_needsfirmware_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, + &cxusb_bluebird_dualdig4_rev2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, + THIS_MODULE, NULL, adapter_nr) || + 0) + return 0; + + return -EINVAL; +} + +static struct usb_device_id cxusb_table [] = { + { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, + { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, + { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, + { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) }, + { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, cxusb_table); + +static struct dvb_usb_device_properties cxusb_medion_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_cx22702_frontend_attach, + .tuner_attach = cxusb_fmd1216me_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + .power_ctrl = cxusb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Medion MD95700 (MDUSBTV-HYBRID)", + { NULL }, + { &cxusb_table[0], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-bluebird-01.fw", + .download_firmware = bluebird_patch_dvico_firmware_download, + /* use usb alt setting 0 for EP4 transfer (dvb-t), + use usb alt setting 7 for EP2 transfer (atsc) */ + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_lgdt3303_frontend_attach, + .tuner_attach = cxusb_lgh064f_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_bluebird_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_dvico_portable_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), + .rc_query = cxusb_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV5 USB Gold", + { &cxusb_table[1], NULL }, + { &cxusb_table[2], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-bluebird-01.fw", + .download_firmware = bluebird_patch_dvico_firmware_download, + /* use usb alt setting 0 for EP4 transfer (dvb-t), + use usb alt setting 7 for EP2 transfer (atsc) */ + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_dee1601_frontend_attach, + .tuner_attach = cxusb_dee1601_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x04, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_bluebird_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .rc.legacy = { + .rc_interval = 150, + .rc_map_table = rc_map_dvico_mce_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table), + .rc_query = cxusb_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 3, + .devices = { + { "DViCO FusionHDTV DVB-T Dual USB", + { &cxusb_table[3], NULL }, + { &cxusb_table[4], NULL }, + }, + { "DigitalNow DVB-T Dual USB", + { &cxusb_table[9], NULL }, + { &cxusb_table[10], NULL }, + }, + { "DViCO FusionHDTV DVB-T Dual Digital 2", + { &cxusb_table[11], NULL }, + { &cxusb_table[12], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-bluebird-01.fw", + .download_firmware = bluebird_patch_dvico_firmware_download, + /* use usb alt setting 0 for EP4 transfer (dvb-t), + use usb alt setting 7 for EP2 transfer (atsc) */ + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_mt352_frontend_attach, + .tuner_attach = cxusb_lgz201_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x04, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + .power_ctrl = cxusb_bluebird_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_dvico_portable_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), + .rc_query = cxusb_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T USB (LGZ201)", + { &cxusb_table[5], NULL }, + { &cxusb_table[6], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-bluebird-01.fw", + .download_firmware = bluebird_patch_dvico_firmware_download, + /* use usb alt setting 0 for EP4 transfer (dvb-t), + use usb alt setting 7 for EP2 transfer (atsc) */ + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_mt352_frontend_attach, + .tuner_attach = cxusb_dtt7579_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x04, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + .power_ctrl = cxusb_bluebird_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_dvico_portable_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), + .rc_query = cxusb_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T USB (TH7579)", + { &cxusb_table[7], NULL }, + { &cxusb_table[8], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_dualdig4_frontend_attach, + .tuner_attach = cxusb_dvico_xc3028_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_dvico_mce_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table), + .rc_query = cxusb_bluebird2_rc_query, + }, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T Dual Digital 4", + { NULL }, + { &cxusb_table[13], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .identify_state = bluebird_fx2_identify_state, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_nano2_frontend_attach, + .tuner_attach = cxusb_dvico_xc3028_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_nano2_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_dvico_portable_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), + .rc_query = cxusb_bluebird2_rc_query, + }, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T NANO2", + { NULL }, + { &cxusb_table[14], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-bluebird-02.fw", + .download_firmware = bluebird_patch_dvico_firmware_download, + .identify_state = bluebird_fx2_identify_state, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_nano2_frontend_attach, + .tuner_attach = cxusb_dvico_xc3028_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_nano2_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_dvico_portable_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_portable_table), + .rc_query = cxusb_rc_query, + }, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T NANO2 w/o firmware", + { &cxusb_table[14], NULL }, + { &cxusb_table[15], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_aver_a868r_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_aver_streaming_ctrl, + .frontend_attach = cxusb_aver_lgdt3303_frontend_attach, + .tuner_attach = cxusb_mxl5003s_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x04, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + .power_ctrl = cxusb_aver_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "AVerMedia AVerTVHD Volar (A868R)", + { NULL }, + { &cxusb_table[16], NULL }, + }, + } +}; + +static +struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .size_of_priv = sizeof(struct dib0700_adapter_state), + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_streaming_ctrl, + .frontend_attach = cxusb_dualdig4_rev2_frontend_attach, + .tuner_attach = cxusb_dualdig4_rev2_tuner_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_bluebird_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_dvico_mce_table, + .rc_map_size = ARRAY_SIZE(rc_map_dvico_mce_table), + .rc_query = cxusb_rc_query, + }, + + .num_device_descs = 1, + .devices = { + { "DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2)", + { NULL }, + { &cxusb_table[17], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_d680_dmb_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, + .frontend_attach = cxusb_d680_dmb_frontend_attach, + .tuner_attach = cxusb_d680_dmb_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_d680_dmb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_d680_dmb_table, + .rc_map_size = ARRAY_SIZE(rc_map_d680_dmb_table), + .rc_query = cxusb_d680_dmb_rc_query, + }, + + .num_device_descs = 1, + .devices = { + { + "Conexant DMB-TH Stick", + { NULL }, + { &cxusb_table[18], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties cxusb_mygica_d689_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, + .frontend_attach = cxusb_mygica_d689_frontend_attach, + .tuner_attach = cxusb_mygica_d689_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + }, + }, + + .power_ctrl = cxusb_d680_dmb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_d680_dmb_table, + .rc_map_size = ARRAY_SIZE(rc_map_d680_dmb_table), + .rc_query = cxusb_d680_dmb_rc_query, + }, + + .num_device_descs = 1, + .devices = { + { + "Mygica D689 DMB-TH", + { NULL }, + { &cxusb_table[19], NULL }, + }, + } +}; + +static struct usb_driver cxusb_driver = { + .name = "dvb_usb_cxusb", + .probe = cxusb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = cxusb_table, +}; + +module_usb_driver(cxusb_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>"); +MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>"); +MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); +MODULE_VERSION("1.0-alpha"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h new file mode 100644 index 000000000000..1a51eafd31b9 --- /dev/null +++ b/drivers/media/usb/dvb-usb/cxusb.h @@ -0,0 +1,35 @@ +#ifndef _DVB_USB_CXUSB_H_ +#define _DVB_USB_CXUSB_H_ + +#define DVB_USB_LOG_PREFIX "cxusb" +#include "dvb-usb.h" + +/* usb commands - some of it are guesses, don't have a reference yet */ +#define CMD_BLUEBIRD_GPIO_RW 0x05 + +#define CMD_I2C_WRITE 0x08 +#define CMD_I2C_READ 0x09 + +#define CMD_GPIO_READ 0x0d +#define CMD_GPIO_WRITE 0x0e +#define GPIO_TUNER 0x02 + +#define CMD_POWER_OFF 0xdc +#define CMD_POWER_ON 0xde + +#define CMD_STREAMING_ON 0x36 +#define CMD_STREAMING_OFF 0x37 + +#define CMD_AVER_STREAM_ON 0x18 +#define CMD_AVER_STREAM_OFF 0x19 + +#define CMD_GET_IR_CODE 0x47 + +#define CMD_ANALOG 0x50 +#define CMD_DIGITAL 0x51 + +struct cxusb_state { + u8 gpio_write_state[3]; +}; + +#endif diff --git a/drivers/media/usb/dvb-usb/dib0700.h b/drivers/media/usb/dvb-usb/dib0700.h new file mode 100644 index 000000000000..7de125c0b36f --- /dev/null +++ b/drivers/media/usb/dvb-usb/dib0700.h @@ -0,0 +1,75 @@ +/* Linux driver for devices based on the DiBcom DiB0700 USB bridge + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * Copyright (C) 2005-6 DiBcom, SA + */ +#ifndef _DIB0700_H_ +#define _DIB0700_H_ + +#define DVB_USB_LOG_PREFIX "dib0700" +#include "dvb-usb.h" + +#include "dib07x0.h" + +extern int dvb_usb_dib0700_debug; +#define deb_info(args...) dprintk(dvb_usb_dib0700_debug,0x01,args) +#define deb_fw(args...) dprintk(dvb_usb_dib0700_debug,0x02,args) +#define deb_fwdata(args...) dprintk(dvb_usb_dib0700_debug,0x04,args) +#define deb_data(args...) dprintk(dvb_usb_dib0700_debug,0x08,args) + +#define REQUEST_SET_USB_XFER_LEN 0x0 /* valid only for firmware version */ + /* higher than 1.21 */ +#define REQUEST_I2C_READ 0x2 +#define REQUEST_I2C_WRITE 0x3 +#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */ +#define REQUEST_JUMPRAM 0x8 +#define REQUEST_SET_CLOCK 0xB +#define REQUEST_SET_GPIO 0xC +#define REQUEST_ENABLE_VIDEO 0xF + // 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog) + // 2 Byte: MPEG2 mode: 4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1) + // 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines) 4LSB( " " ) +#define REQUEST_SET_I2C_PARAM 0x10 +#define REQUEST_SET_RC 0x11 +#define REQUEST_NEW_I2C_READ 0x12 +#define REQUEST_NEW_I2C_WRITE 0x13 +#define REQUEST_GET_VERSION 0x15 + +struct dib0700_state { + u8 channel_state; + u16 mt2060_if1[2]; + u8 rc_toggle; + u8 rc_counter; + u8 is_dib7000pc; + u8 fw_use_new_i2c_api; + u8 disable_streaming_master_mode; + u32 fw_version; + u32 nb_packet_buffer_size; + int (*read_status)(struct dvb_frontend *, fe_status_t *); + int (*sleep)(struct dvb_frontend* fe); + u8 buf[255]; +}; + +extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype); +extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); +extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); +extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen); +extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw); +extern int dib0700_rc_setup(struct dvb_usb_device *d); +extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); +extern struct i2c_algorithm dib0700_i2c_algo; +extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, int *cold); +extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type); +extern int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz); + +extern int dib0700_device_count; +extern int dvb_usb_dib0700_ir_proto; +extern struct dvb_usb_device_properties dib0700_devices[]; +extern struct usb_device_id dib0700_usb_id_table[]; + +#endif diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c new file mode 100644 index 000000000000..ef87229de6af --- /dev/null +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -0,0 +1,845 @@ +/* Linux driver for devices based on the DiBcom DiB0700 USB bridge + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * Copyright (C) 2005-6 DiBcom, SA + */ +#include "dib0700.h" + +/* debug */ +int dvb_usb_dib0700_debug; +module_param_named(debug,dvb_usb_dib0700_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS); + +static int nb_packet_buffer_size = 21; +module_param(nb_packet_buffer_size, int, 0644); +MODULE_PARM_DESC(nb_packet_buffer_size, + "Set the dib0700 driver data buffer size. This parameter " + "corresponds to the number of TS packets. The actual size of " + "the data buffer corresponds to this parameter " + "multiplied by 188 (default: 21)"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + + +int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype) +{ + struct dib0700_state *st = d->priv; + int ret; + + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + return -EINTR; + } + + ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + st->buf, 16, USB_CTRL_GET_TIMEOUT); + if (hwversion != NULL) + *hwversion = (st->buf[0] << 24) | (st->buf[1] << 16) | + (st->buf[2] << 8) | st->buf[3]; + if (romversion != NULL) + *romversion = (st->buf[4] << 24) | (st->buf[5] << 16) | + (st->buf[6] << 8) | st->buf[7]; + if (ramversion != NULL) + *ramversion = (st->buf[8] << 24) | (st->buf[9] << 16) | + (st->buf[10] << 8) | st->buf[11]; + if (fwtype != NULL) + *fwtype = (st->buf[12] << 24) | (st->buf[13] << 16) | + (st->buf[14] << 8) | st->buf[15]; + mutex_unlock(&d->usb_mutex); + return ret; +} + +/* expecting rx buffer: request data[0] data[1] ... data[2] */ +static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) +{ + int status; + + deb_data(">>> "); + debug_dump(tx, txlen, deb_data); + + status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0), + tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen, + USB_CTRL_GET_TIMEOUT); + + if (status != txlen) + deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen); + + return status < 0 ? status : 0; +} + +/* expecting tx buffer: request data[0] ... data[n] (n <= 4) */ +int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen) +{ + u16 index, value; + int status; + + if (txlen < 2) { + err("tx buffer length is smaller than 2. Makes no sense."); + return -EINVAL; + } + if (txlen > 4) { + err("tx buffer length is larger than 4. Not supported."); + return -EINVAL; + } + + deb_data(">>> "); + debug_dump(tx,txlen,deb_data); + + value = ((txlen - 2) << 8) | tx[1]; + index = 0; + if (txlen > 2) + index |= (tx[2] << 8); + if (txlen > 3) + index |= tx[3]; + + status = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), tx[0], + USB_TYPE_VENDOR | USB_DIR_IN, value, index, rx, rxlen, + USB_CTRL_GET_TIMEOUT); + + if (status < 0) + deb_info("ep 0 read error (status = %d)\n",status); + + deb_data("<<< "); + debug_dump(rx, rxlen, deb_data); + + return status; /* length in case of success */ +} + +int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val) +{ + struct dib0700_state *st = d->priv; + int ret; + + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + return -EINTR; + } + + st->buf[0] = REQUEST_SET_GPIO; + st->buf[1] = gpio; + st->buf[2] = ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6); + + ret = dib0700_ctrl_wr(d, st->buf, 3); + + mutex_unlock(&d->usb_mutex); + return ret; +} + +static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets) +{ + struct dib0700_state *st = d->priv; + int ret; + + if (st->fw_version >= 0x10201) { + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + return -EINTR; + } + + st->buf[0] = REQUEST_SET_USB_XFER_LEN; + st->buf[1] = (nb_ts_packets >> 8) & 0xff; + st->buf[2] = nb_ts_packets & 0xff; + + deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets); + + ret = dib0700_ctrl_wr(d, st->buf, 3); + mutex_unlock(&d->usb_mutex); + } else { + deb_info("this firmware does not allow to change the USB xfer len\n"); + ret = -EIO; + } + + return ret; +} + +/* + * I2C master xfer function (supported in 1.20 firmware) + */ +static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + /* The new i2c firmware messages are more reliable and in particular + properly support i2c read calls not preceded by a write */ + + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct dib0700_state *st = d->priv; + uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */ + uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */ + uint8_t en_start = 0; + uint8_t en_stop = 0; + int result, i; + + /* Ensure nobody else hits the i2c bus while we're sending our + sequence of messages, (such as the remote control thread) */ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EINTR; + + for (i = 0; i < num; i++) { + if (i == 0) { + /* First message in the transaction */ + en_start = 1; + } else if (!(msg[i].flags & I2C_M_NOSTART)) { + /* Device supports repeated-start */ + en_start = 1; + } else { + /* Not the first packet and device doesn't support + repeated start */ + en_start = 0; + } + if (i == (num - 1)) { + /* Last message in the transaction */ + en_stop = 1; + } + + if (msg[i].flags & I2C_M_RD) { + /* Read request */ + u16 index, value; + uint8_t i2c_dest; + + i2c_dest = (msg[i].addr << 1); + value = ((en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F)) << 8 | i2c_dest; + /* I2C ctrl + FE bus; */ + index = ((gen_mode << 6) & 0xC0) | + ((bus_mode << 4) & 0x30); + + result = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_READ, + USB_TYPE_VENDOR | USB_DIR_IN, + value, index, msg[i].buf, + msg[i].len, + USB_CTRL_GET_TIMEOUT); + if (result < 0) { + deb_info("i2c read error (status = %d)\n", result); + break; + } + + deb_data("<<< "); + debug_dump(msg[i].buf, msg[i].len, deb_data); + + } else { + /* Write request */ + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + mutex_unlock(&d->i2c_mutex); + return -EINTR; + } + st->buf[0] = REQUEST_NEW_I2C_WRITE; + st->buf[1] = msg[i].addr << 1; + st->buf[2] = (en_start << 7) | (en_stop << 6) | + (msg[i].len & 0x3F); + /* I2C ctrl + FE bus; */ + st->buf[3] = ((gen_mode << 6) & 0xC0) | + ((bus_mode << 4) & 0x30); + /* The Actual i2c payload */ + memcpy(&st->buf[4], msg[i].buf, msg[i].len); + + deb_data(">>> "); + debug_dump(st->buf, msg[i].len + 4, deb_data); + + result = usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev, 0), + REQUEST_NEW_I2C_WRITE, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, st->buf, msg[i].len + 4, + USB_CTRL_GET_TIMEOUT); + mutex_unlock(&d->usb_mutex); + if (result < 0) { + deb_info("i2c write error (status = %d)\n", result); + break; + } + } + } + mutex_unlock(&d->i2c_mutex); + return i; +} + +/* + * I2C master xfer function (pre-1.20 firmware) + */ +static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, + struct i2c_msg *msg, int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct dib0700_state *st = d->priv; + int i,len; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EINTR; + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + mutex_unlock(&d->i2c_mutex); + return -EINTR; + } + + for (i = 0; i < num; i++) { + /* fill in the address */ + st->buf[1] = msg[i].addr << 1; + /* fill the buffer */ + memcpy(&st->buf[2], msg[i].buf, msg[i].len); + + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + st->buf[0] = REQUEST_I2C_READ; + st->buf[1] |= 1; + + /* special thing in the current firmware: when length is zero the read-failed */ + len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2, + msg[i+1].buf, msg[i+1].len); + if (len <= 0) { + deb_info("I2C read failed on address 0x%02x\n", + msg[i].addr); + break; + } + + msg[i+1].len = len; + + i++; + } else { + st->buf[0] = REQUEST_I2C_WRITE; + if (dib0700_ctrl_wr(d, st->buf, msg[i].len + 2) < 0) + break; + } + } + mutex_unlock(&d->usb_mutex); + mutex_unlock(&d->i2c_mutex); + + return i; +} + +static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct dib0700_state *st = d->priv; + + if (st->fw_use_new_i2c_api == 1) { + /* User running at least fw 1.20 */ + return dib0700_i2c_xfer_new(adap, msg, num); + } else { + /* Use legacy calls */ + return dib0700_i2c_xfer_legacy(adap, msg, num); + } +} + +static u32 dib0700_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +struct i2c_algorithm dib0700_i2c_algo = { + .master_xfer = dib0700_i2c_xfer, + .functionality = dib0700_i2c_func, +}; + +int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, int *cold) +{ + s16 ret; + u8 *b; + + b = kmalloc(16, GFP_KERNEL); + if (!b) + return -ENOMEM; + + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT); + + deb_info("FW GET_VERSION length: %d\n",ret); + + *cold = ret <= 0; + deb_info("cold: %d\n", *cold); + + kfree(b); + return 0; +} + +static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll, + u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv, + u16 pll_loopdiv, u16 free_div, u16 dsuScaler) +{ + struct dib0700_state *st = d->priv; + int ret; + + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + return -EINTR; + } + + st->buf[0] = REQUEST_SET_CLOCK; + st->buf[1] = (en_pll << 7) | (pll_src << 6) | + (pll_range << 5) | (clock_gpio3 << 4); + st->buf[2] = (pll_prediv >> 8) & 0xff; /* MSB */ + st->buf[3] = pll_prediv & 0xff; /* LSB */ + st->buf[4] = (pll_loopdiv >> 8) & 0xff; /* MSB */ + st->buf[5] = pll_loopdiv & 0xff; /* LSB */ + st->buf[6] = (free_div >> 8) & 0xff; /* MSB */ + st->buf[7] = free_div & 0xff; /* LSB */ + st->buf[8] = (dsuScaler >> 8) & 0xff; /* MSB */ + st->buf[9] = dsuScaler & 0xff; /* LSB */ + + ret = dib0700_ctrl_wr(d, st->buf, 10); + mutex_unlock(&d->usb_mutex); + + return ret; +} + +int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz) +{ + struct dib0700_state *st = d->priv; + u16 divider; + int ret; + + if (scl_kHz == 0) + return -EINVAL; + + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + return -EINTR; + } + + st->buf[0] = REQUEST_SET_I2C_PARAM; + divider = (u16) (30000 / scl_kHz); + st->buf[1] = 0; + st->buf[2] = (u8) (divider >> 8); + st->buf[3] = (u8) (divider & 0xff); + divider = (u16) (72000 / scl_kHz); + st->buf[4] = (u8) (divider >> 8); + st->buf[5] = (u8) (divider & 0xff); + divider = (u16) (72000 / scl_kHz); /* clock: 72MHz */ + st->buf[6] = (u8) (divider >> 8); + st->buf[7] = (u8) (divider & 0xff); + + deb_info("setting I2C speed: %04x %04x %04x (%d kHz).", + (st->buf[2] << 8) | (st->buf[3]), (st->buf[4] << 8) | + st->buf[5], (st->buf[6] << 8) | st->buf[7], scl_kHz); + + ret = dib0700_ctrl_wr(d, st->buf, 8); + mutex_unlock(&d->usb_mutex); + + return ret; +} + + +int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3) +{ + switch (clk_MHz) { + case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break; + default: return -EINVAL; + } + return 0; +} + +static int dib0700_jumpram(struct usb_device *udev, u32 address) +{ + int ret = 0, actlen; + u8 *buf; + + buf = kmalloc(8, GFP_KERNEL); + if (!buf) + return -ENOMEM; + buf[0] = REQUEST_JUMPRAM; + buf[1] = 0; + buf[2] = 0; + buf[3] = 0; + buf[4] = (address >> 24) & 0xff; + buf[5] = (address >> 16) & 0xff; + buf[6] = (address >> 8) & 0xff; + buf[7] = address & 0xff; + + if ((ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x01),buf,8,&actlen,1000)) < 0) { + deb_fw("jumpram to 0x%x failed\n",address); + goto out; + } + if (actlen != 8) { + deb_fw("jumpram to 0x%x failed\n",address); + ret = -EIO; + goto out; + } +out: + kfree(buf); + return ret; +} + +int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw) +{ + struct hexline hx; + int pos = 0, ret, act_len, i, adap_num; + u8 *buf; + u32 fw_version; + + buf = kmalloc(260, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) { + deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n", + hx.addr, hx.len, hx.chk); + + buf[0] = hx.len; + buf[1] = (hx.addr >> 8) & 0xff; + buf[2] = hx.addr & 0xff; + buf[3] = hx.type; + memcpy(&buf[4],hx.data,hx.len); + buf[4+hx.len] = hx.chk; + + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, 0x01), + buf, + hx.len + 5, + &act_len, + 1000); + + if (ret < 0) { + err("firmware download failed at %d with %d",pos,ret); + goto out; + } + } + + if (ret == 0) { + /* start the firmware */ + if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) { + info("firmware started successfully."); + msleep(500); + } + } else + ret = -EIO; + + /* the number of ts packet has to be at least 1 */ + if (nb_packet_buffer_size < 1) + nb_packet_buffer_size = 1; + + /* get the fimware version */ + usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + buf, 16, USB_CTRL_GET_TIMEOUT); + fw_version = (buf[8] << 24) | (buf[9] << 16) | (buf[10] << 8) | buf[11]; + + /* set the buffer size - DVB-USB is allocating URB buffers + * only after the firwmare download was successful */ + for (i = 0; i < dib0700_device_count; i++) { + for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters; + adap_num++) { + if (fw_version >= 0x10201) { + dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 188*nb_packet_buffer_size; + } else { + /* for fw version older than 1.20.1, + * the buffersize has to be n times 512 */ + dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512; + if (dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize < 512) + dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 512; + } + } + } +out: + kfree(buf); + return ret; +} + +int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct dib0700_state *st = adap->dev->priv; + int ret; + + if ((onoff != 0) && (st->fw_version >= 0x10201)) { + /* for firmware later than 1.20.1, + * the USB xfer length can be set */ + ret = dib0700_set_usb_xfer_len(adap->dev, + st->nb_packet_buffer_size); + if (ret < 0) { + deb_info("can not set the USB xfer len\n"); + return ret; + } + } + + if (mutex_lock_interruptible(&adap->dev->usb_mutex) < 0) { + err("could not acquire lock"); + return -EINTR; + } + + st->buf[0] = REQUEST_ENABLE_VIDEO; + /* this bit gives a kind of command, + * rather than enabling something or not */ + st->buf[1] = (onoff << 4) | 0x00; + + if (st->disable_streaming_master_mode == 1) + st->buf[2] = 0x00; + else + st->buf[2] = 0x01 << 4; /* Master mode */ + + st->buf[3] = 0x00; + + deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id); + + st->channel_state &= ~0x3; + if ((adap->fe_adap[0].stream.props.endpoint != 2) + && (adap->fe_adap[0].stream.props.endpoint != 3)) { + deb_info("the endpoint number (%i) is not correct, use the adapter id instead", adap->fe_adap[0].stream.props.endpoint); + if (onoff) + st->channel_state |= 1 << (adap->id); + else + st->channel_state |= 1 << ~(adap->id); + } else { + if (onoff) + st->channel_state |= 1 << (adap->fe_adap[0].stream.props.endpoint-2); + else + st->channel_state |= 1 << (3-adap->fe_adap[0].stream.props.endpoint); + } + + st->buf[2] |= st->channel_state; + + deb_info("data for streaming: %x %x\n", st->buf[1], st->buf[2]); + + ret = dib0700_ctrl_wr(adap->dev, st->buf, 4); + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + +int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type) +{ + struct dvb_usb_device *d = rc->priv; + struct dib0700_state *st = d->priv; + int new_proto, ret; + + if (mutex_lock_interruptible(&d->usb_mutex) < 0) { + err("could not acquire lock"); + return -EINTR; + } + + st->buf[0] = REQUEST_SET_RC; + st->buf[1] = 0; + st->buf[2] = 0; + + /* Set the IR mode */ + if (rc_type == RC_TYPE_RC5) + new_proto = 1; + else if (rc_type == RC_TYPE_NEC) + new_proto = 0; + else if (rc_type == RC_TYPE_RC6) { + if (st->fw_version < 0x10200) { + ret = -EINVAL; + goto out; + } + + new_proto = 2; + } else { + ret = -EINVAL; + goto out; + } + + st->buf[1] = new_proto; + + ret = dib0700_ctrl_wr(d, st->buf, 3); + if (ret < 0) { + err("ir protocol setup failed"); + goto out; + } + + d->props.rc.core.protocol = rc_type; + +out: + mutex_unlock(&d->usb_mutex); + return ret; +} + +/* Number of keypresses to ignore before start repeating */ +#define RC_REPEAT_DELAY_V1_20 10 + +/* This is the structure of the RC response packet starting in firmware 1.20 */ +struct dib0700_rc_response { + u8 report_id; + u8 data_state; + union { + u16 system16; + struct { + u8 not_system; + u8 system; + }; + }; + u8 data; + u8 not_data; +}; +#define RC_MSG_SIZE_V1_20 6 + +static void dib0700_rc_urb_completion(struct urb *purb) +{ + struct dvb_usb_device *d = purb->context; + struct dib0700_rc_response *poll_reply; + u32 uninitialized_var(keycode); + u8 toggle; + + deb_info("%s()\n", __func__); + if (d->rc_dev == NULL) { + /* This will occur if disable_rc_polling=1 */ + kfree(purb->transfer_buffer); + usb_free_urb(purb); + return; + } + + poll_reply = purb->transfer_buffer; + + if (purb->status < 0) { + deb_info("discontinuing polling\n"); + kfree(purb->transfer_buffer); + usb_free_urb(purb); + return; + } + + if (purb->actual_length != RC_MSG_SIZE_V1_20) { + deb_info("malformed rc msg size=%d\n", purb->actual_length); + goto resubmit; + } + + deb_data("IR ID = %02X state = %02X System = %02X %02X Cmd = %02X %02X (len %d)\n", + poll_reply->report_id, poll_reply->data_state, + poll_reply->system, poll_reply->not_system, + poll_reply->data, poll_reply->not_data, + purb->actual_length); + + switch (d->props.rc.core.protocol) { + case RC_TYPE_NEC: + toggle = 0; + + /* NEC protocol sends repeat code as 0 0 0 FF */ + if ((poll_reply->system == 0x00) && (poll_reply->data == 0x00) + && (poll_reply->not_data == 0xff)) { + poll_reply->data_state = 2; + break; + } + + if ((poll_reply->system ^ poll_reply->not_system) != 0xff) { + deb_data("NEC extended protocol\n"); + /* NEC extended code - 24 bits */ + keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data; + } else { + deb_data("NEC normal protocol\n"); + /* normal NEC code - 16 bits */ + keycode = poll_reply->system << 8 | poll_reply->data; + } + + break; + default: + deb_data("RC5 protocol\n"); + /* RC5 Protocol */ + toggle = poll_reply->report_id; + keycode = poll_reply->system << 8 | poll_reply->data; + + break; + } + + if ((poll_reply->data + poll_reply->not_data) != 0xff) { + /* Key failed integrity check */ + err("key failed integrity check: %04x %02x %02x", + poll_reply->system, + poll_reply->data, poll_reply->not_data); + goto resubmit; + } + + rc_keydown(d->rc_dev, keycode, toggle); + +resubmit: + /* Clean the buffer before we requeue */ + memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20); + + /* Requeue URB */ + usb_submit_urb(purb, GFP_ATOMIC); +} + +int dib0700_rc_setup(struct dvb_usb_device *d) +{ + struct dib0700_state *st = d->priv; + struct urb *purb; + int ret; + + /* Poll-based. Don't initialize bulk mode */ + if (st->fw_version < 0x10200) + return 0; + + /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */ + purb = usb_alloc_urb(0, GFP_KERNEL); + if (purb == NULL) { + err("rc usb alloc urb failed"); + return -ENOMEM; + } + + purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL); + if (purb->transfer_buffer == NULL) { + err("rc kzalloc failed"); + usb_free_urb(purb); + return -ENOMEM; + } + + purb->status = -EINPROGRESS; + usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1), + purb->transfer_buffer, RC_MSG_SIZE_V1_20, + dib0700_rc_urb_completion, d); + + ret = usb_submit_urb(purb, GFP_ATOMIC); + if (ret) { + err("rc submit urb failed"); + kfree(purb->transfer_buffer); + usb_free_urb(purb); + } + + return ret; +} + +static int dib0700_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int i; + struct dvb_usb_device *dev; + + for (i = 0; i < dib0700_device_count; i++) + if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE, + &dev, adapter_nr) == 0) { + struct dib0700_state *st = dev->priv; + u32 hwversion, romversion, fw_version, fwtype; + + dib0700_get_version(dev, &hwversion, &romversion, + &fw_version, &fwtype); + + deb_info("Firmware version: %x, %d, 0x%x, %d\n", + hwversion, romversion, fw_version, fwtype); + + st->fw_version = fw_version; + st->nb_packet_buffer_size = (u32)nb_packet_buffer_size; + + /* Disable polling mode on newer firmwares */ + if (st->fw_version >= 0x10200) + dev->props.rc.core.bulk_mode = true; + else + dev->props.rc.core.bulk_mode = false; + + dib0700_rc_setup(dev); + + return 0; + } + + return -ENODEV; +} + +static struct usb_driver dib0700_driver = { + .name = "dvb_usb_dib0700", + .probe = dib0700_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dib0700_usb_id_table, +}; + +module_usb_driver(dib0700_driver); + +MODULE_FIRMWARE("dvb-usb-dib0700-1.20.fw"); +MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>"); +MODULE_DESCRIPTION("Driver for devices based on DiBcom DiB0700 - USB bridge"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c new file mode 100644 index 000000000000..510001da6e83 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -0,0 +1,4813 @@ +/* Linux driver for devices based on the DiBcom DiB0700 USB bridge + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * Copyright (C) 2005-9 DiBcom, SA et al + */ +#include "dib0700.h" + +#include "dib3000mc.h" +#include "dib7000m.h" +#include "dib7000p.h" +#include "dib8000.h" +#include "dib9000.h" +#include "mt2060.h" +#include "mt2266.h" +#include "tuner-xc2028.h" +#include "xc5000.h" +#include "xc4000.h" +#include "s5h1411.h" +#include "dib0070.h" +#include "dib0090.h" +#include "lgdt3305.h" +#include "mxl5007t.h" + +static int force_lna_activation; +module_param(force_lna_activation, int, 0644); +MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), " + "if applicable for the device (default: 0=automatic/off)."); + +struct dib0700_adapter_state { + int (*set_param_save) (struct dvb_frontend *); + const struct firmware *frontend_firmware; +}; + +/* Hauppauge Nova-T 500 (aka Bristol) + * has a LNA on GPIO0 which is enabled by setting 1 */ +static struct mt2060_config bristol_mt2060_config[2] = { + { + .i2c_address = 0x60, + .clock_out = 3, + }, { + .i2c_address = 0x61, + } +}; + + +static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { + .band_caps = BAND_VHF | BAND_UHF, + .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), + + .agc1_max = 42598, + .agc1_min = 17694, + .agc2_max = 45875, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 59, + + .agc1_slope1 = 0, + .agc1_slope2 = 69, + + .agc2_pt1 = 0, + .agc2_pt2 = 59, + + .agc2_slope1 = 111, + .agc2_slope2 = 28, +}; + +static struct dib3000mc_config bristol_dib3000mc_config[2] = { + { .agc = &bristol_dib3000p_mt2060_agc_config, + .max_time = 0x196, + .ln_adc_level = 0x1cc7, + .output_mpeg2_in_188_bytes = 1, + }, + { .agc = &bristol_dib3000p_mt2060_agc_config, + .max_time = 0x196, + .ln_adc_level = 0x1cc7, + .output_mpeg2_in_188_bytes = 1, + } +}; + +static int bristol_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + if (adap->id == 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); + + if (force_lna_activation) + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + else + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); + + if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); + return -ENODEV; + } + } + st->mt2060_if1[adap->id] = 1220; + return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, + (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; +} + +static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) +{ + struct i2c_msg msg[2] = { + { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 }, + }; + if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO; + return 0; +} + +static int bristol_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; + struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1); + s8 a; + int if1=1220; + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { + if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; + } + return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, + &bristol_mt2060_config[adap->id], if1) == NULL ? + -ENODEV : 0; +} + +/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */ + +/* MT226x */ +static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = { + { + BAND_UHF, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 1130, + 21, + + 0, + 118, + + 0, + 3530, + 1, + 0, + + 65535, + 33770, + 65535, + 23592, + + 0, + 62, + 255, + 64, + 64, + 132, + 192, + 80, + 80, + + 17, + 27, + 23, + 51, + + 1, + }, { + BAND_VHF | BAND_LBAND, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), + + 2372, + 21, + + 0, + 118, + + 0, + 3530, + 1, + 0, + + 65535, + 0, + 65535, + 23592, + + 0, + 128, + 128, + 128, + 0, + 128, + 253, + 81, + 0, + + 17, + 27, + 23, + 51, + + 1, + } +}; + +static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = { + 60000, 30000, + 1, 8, 3, 1, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (524 << 0), + 0, + 20452225, +}; + +static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = { + { .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + + .agc_config_count = 2, + .agc = stk7700d_7000p_mt2266_agc_config, + .bw = &stk7700d_mt2266_pll_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + }, + { .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + + .agc_config_count = 2, + .agc = stk7700d_7000p_mt2266_agc_config, + .bw = &stk7700d_mt2266_pll_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + } +}; + +static struct mt2266_config stk7700d_mt2266_config[2] = { + { .i2c_address = 0x60 + }, + { .i2c_address = 0x60 + } +}; + +static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (adap->id == 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + stk7700d_dib7000p_mt2266_config) + != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + } + + adap->fe_adap[0].fe = + dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, + 0x80 + (adap->id << 1), + &stk7700d_dib7000p_mt2266_config[adap->id]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (adap->id == 0) { + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, + stk7700d_dib7000p_mt2266_config) + != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + } + + adap->fe_adap[0].fe = + dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, + 0x80 + (adap->id << 1), + &stk7700d_dib7000p_mt2266_config[adap->id]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c, + &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0; +} + +/* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ +static struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ +static struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, 30000, /* internal, sampling */ + 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ + 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, + modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000, /* xtal_hz */ +}; + +static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { + .output_mpeg2_in_188_bytes = 1, + .tuner_is_baseband = 1, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, +}; + +static int stk7700ph_xc3028_callback(void *ptr, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = ptr; + + switch (command) { + case XC2028_TUNER_RESET: + /* Send the tuner in then out of reset */ + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10); + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + break; + case XC2028_RESET_CLK: + break; + default: + err("%s: unknown command %d, arg %d\n", __func__, + command, arg); + return -EINVAL; + } + return 0; +} + +static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_DIBCOM52, +}; + +static struct xc2028_config stk7700ph_xc3028_config = { + .i2c_addr = 0x61, + .ctrl = &stk7700ph_xc3028_ctrl, +}; + +static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; + + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + msleep(10); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &stk7700ph_dib7700_xc3028_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &stk7700ph_dib7700_xc3028_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + stk7700ph_xc3028_config.i2c_adap = tun_i2c; + + /* FIXME: generalize & move to common area */ + adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback; + + return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config) + == NULL ? -ENODEV : 0; +} + +#define DEFAULT_RC_INTERVAL 50 + +static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; + +/* Number of keypresses to ignore before start repeating */ +#define RC_REPEAT_DELAY 6 + +/* + * This function is used only when firmware is < 1.20 version. Newer + * firmwares use bulk mode, with functions implemented at dib0700_core, + * at dib0700_rc_urb_completion() + */ +static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) +{ + u8 key[4]; + u32 keycode; + u8 toggle; + int i; + struct dib0700_state *st = d->priv; + + if (st->fw_version >= 0x10200) { + /* For 1.20 firmware , We need to keep the RC polling + callback so we can reuse the input device setup in + dvb-usb-remote.c. However, the actual work is being done + in the bulk URB completion handler. */ + return 0; + } + + i = dib0700_ctrl_rd(d, rc_request, 2, key, 4); + if (i <= 0) { + err("RC Query Failed"); + return -1; + } + + /* losing half of KEY_0 events from Philipps rc5 remotes.. */ + if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0) + return 0; + + /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ + + dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */ + + d->last_event = 0; + switch (d->props.rc.core.protocol) { + case RC_TYPE_NEC: + /* NEC protocol sends repeat code as 0 0 0 FF */ + if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && + (key[3] == 0xff)) + keycode = d->last_event; + else { + keycode = key[3-2] << 8 | key[3-3]; + d->last_event = keycode; + } + + rc_keydown(d->rc_dev, keycode, 0); + break; + default: + /* RC-5 protocol changes toggle bit on new keypress */ + keycode = key[3-2] << 8 | key[3-3]; + toggle = key[3-1]; + rc_keydown(d->rc_dev, keycode, toggle); + + break; + } + return 0; +} + +/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ +static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { + BAND_UHF | BAND_VHF, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), + + 712, + 41, + + 0, + 118, + + 0, + 4095, + 0, + 0, + + 42598, + 17694, + 45875, + 2621, + 0, + 76, + 139, + 52, + 59, + 107, + 172, + 57, + 70, + + 21, + 25, + 28, + 48, + + 1, + { 0, + 107, + 51800, + 24700 + }, +}; + +static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { + BAND_UHF | BAND_VHF, + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), + + 712, + 41, + + 0, + 118, + + 0, + 4095, + 0, + 0, + + 42598, + 16384, + 42598, + 0, + + 0, + 137, + 255, + + 0, + 255, + + 0, + 0, + + 0, + 41, + + 15, + 25, + + 28, + 48, + + 0, +}; + +static struct dibx000_bandwidth_config stk7700p_pll_config = { + 60000, 30000, + 1, 8, 3, 1, 0, + 0, 0, 1, 1, 0, + (3 << 14) | (1 << 12) | (524 << 0), + 60258167, + 20452225, + 30000000, +}; + +static struct dib7000m_config stk7700p_dib7000m_config = { + .dvbt_mode = 1, + .output_mpeg2_in_188_bytes = 1, + .quartz_direct = 1, + + .agc_config_count = 1, + .agc = &stk7700p_7000m_mt2060_agc_config, + .bw = &stk7700p_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +static struct dib7000p_config stk7700p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &stk7700p_7000p_mt2060_agc_config, + .bw = &stk7700p_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + /* unless there is no real power management in DVB - we leave the device on GPIO6 */ + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); + dib0700_ctrl_clock(adap->dev, 72, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); + + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + st->mt2060_if1[0] = 1220; + + if (dib7000pc_detection(&adap->dev->i2c_adap)) { + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); + st->is_dib7000pc = 1; + } else + adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static struct mt2060_config stk7700p_mt2060_config = { + 0x60 +}; + +static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; + struct dib0700_state *st = adap->dev->priv; + struct i2c_adapter *tun_i2c; + s8 a; + int if1=1220; + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { + if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; + } + if (st->is_dib7000pc) + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + else + tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config, + if1) == NULL ? -ENODEV : 0; +} + +/* DIB7070 generic */ +static struct dibx000_agc_config dib7070_agc_config = { + BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 600, + 10, + + 0, + 118, + + 0, + 3530, + 1, + 5, + + 65535, + 0, + + 65535, + 0, + + 0, + 40, + 183, + 206, + 255, + 72, + 152, + 88, + 90, + + 17, + 27, + 23, + 51, + + 0, +}; + +static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + deb_info("reset: %d", onoff); + return dib7000p_set_gpio(fe, 8, 0, !onoff); +} + +static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + deb_info("sleep: %d", onoff); + return dib7000p_set_gpio(fe, 9, 0, onoff); +} + +static struct dib0070_config dib7070p_dib0070_config[2] = { + { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 4, + .charge_pump = 2, + }, { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + .charge_pump = 2, + } +}; + +static struct dib0070_config dib7770p_dib0070_config = { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 0, + .flip_chip = 1, + .charge_pump = 2, +}; + +static int dib7070_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + switch (band) { + case BAND_VHF: offset = 950; break; + case BAND_UHF: + default: offset = 550; break; + } + deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + return state->set_param_save(fe); +} + +static int dib7770_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + switch (band) { + case BAND_VHF: + dib7000p_set_gpio(fe, 0, 0, 1); + offset = 850; + break; + case BAND_UHF: + default: + dib7000p_set_gpio(fe, 0, 0, 0); + offset = 250; + break; + } + deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + return state->set_param_save(fe); +} + +static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, + &dib7770p_dib0070_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override; + return 0; +} + +static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + if (adap->id == 0) { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL) + return -ENODEV; + } else { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL) + return -ENODEV; + } + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override; + return 0; +} + +static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index, + u16 pid, int onoff) +{ + struct dib0700_state *st = adapter->dev->priv; + if (st->is_dib7000pc) + return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); + return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) +{ + struct dib0700_state *st = adapter->dev->priv; + if (st->is_dib7000pc) + return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); + return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) +{ + return dib7000p_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) +{ + return dib7000p_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { + 60000, 15000, + 1, 20, 3, 1, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (524 << 0), + (0 << 25) | 0, + 20452225, + 12000000, +}; + +static struct dib7000p_config dib7070p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, +}; + +/* STK7070P */ +static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &dib7070p_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &dib7070p_dib7000p_config); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* STK7770P */ +static struct dib7000p_config dib7770p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .enable_current_mirror = 1, + .disable_sample_and_hold = 0, +}; + +static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &dib7770p_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &dib7770p_dib7000p_config); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* DIB807x generic */ +static struct dibx000_agc_config dib807x_agc_config[2] = { + { + BAND_VHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + * P_agc_write=0 */ + (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | + (0 << 0), /* setup*/ + + 600, /* inv_gain*/ + 10, /* time_stabiliz*/ + + 0, /* alpha_level*/ + 118, /* thlock*/ + + 0, /* wbd_inv*/ + 3530, /* wbd_ref*/ + 1, /* wbd_sel*/ + 5, /* wbd_alpha*/ + + 65535, /* agc1_max*/ + 0, /* agc1_min*/ + + 65535, /* agc2_max*/ + 0, /* agc2_min*/ + + 0, /* agc1_pt1*/ + 40, /* agc1_pt2*/ + 183, /* agc1_pt3*/ + 206, /* agc1_slope1*/ + 255, /* agc1_slope2*/ + 72, /* agc2_pt1*/ + 152, /* agc2_pt2*/ + 88, /* agc2_slope1*/ + 90, /* agc2_slope2*/ + + 17, /* alpha_mant*/ + 27, /* alpha_exp*/ + 23, /* beta_mant*/ + 51, /* beta_exp*/ + + 0, /* perform_agc_softsplit*/ + }, { + BAND_UHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + * P_agc_write=0 */ + (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | + (0 << 0), /* setup */ + + 600, /* inv_gain*/ + 10, /* time_stabiliz*/ + + 0, /* alpha_level*/ + 118, /* thlock*/ + + 0, /* wbd_inv*/ + 3530, /* wbd_ref*/ + 1, /* wbd_sel*/ + 5, /* wbd_alpha*/ + + 65535, /* agc1_max*/ + 0, /* agc1_min*/ + + 65535, /* agc2_max*/ + 0, /* agc2_min*/ + + 0, /* agc1_pt1*/ + 40, /* agc1_pt2*/ + 183, /* agc1_pt3*/ + 206, /* agc1_slope1*/ + 255, /* agc1_slope2*/ + 72, /* agc2_pt1*/ + 152, /* agc2_pt2*/ + 88, /* agc2_slope1*/ + 90, /* agc2_slope2*/ + + 17, /* alpha_mant*/ + 27, /* alpha_exp*/ + 23, /* beta_mant*/ + 51, /* beta_exp*/ + + 0, /* perform_agc_softsplit*/ + } +}; + +static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = { + 60000, 15000, /* internal, sampling*/ + 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/ + 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core, + ADClkSrc, modulo */ + (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/ + (0 << 25) | 0, /* ifreq = 0.000000 MHz*/ + 18179755, /* timf*/ + 12000000, /* xtal_hz*/ +}; + +static struct dib8000_config dib807x_dib8000_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib807x_agc_config, + .pll = &dib807x_bw_config_12_mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 1, + .agc_control = &dib0070_ctrl_agc_filter, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + }, { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib807x_agc_config, + .pll = &dib807x_bw_config_12_mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .agc_control = &dib0070_ctrl_agc_filter, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + } +}; + +static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib8000_set_gpio(fe, 5, 0, !onoff); +} + +static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return dib8000_set_gpio(fe, 0, 0, onoff); +} + +static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = { + { 240, 7}, + { 0xffff, 6}, +}; + +static struct dib0070_config dib807x_dib0070_config[2] = { + { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 4, + .vga_filter = 1, + .force_crystal_mode = 1, + .enable_third_order_filter = 1, + .charge_pump = 0, + .wbd_gain = dib8070_wbd_gain_cfg, + .osc_buffer_state = 0, + .freq_offset_khz_uhf = -100, + .freq_offset_khz_vhf = -100, + }, { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 2, + .vga_filter = 1, + .force_crystal_mode = 1, + .enable_third_order_filter = 1, + .charge_pump = 0, + .wbd_gain = dib8070_wbd_gain_cfg, + .osc_buffer_state = 0, + .freq_offset_khz_uhf = -25, + .freq_offset_khz_vhf = -25, + } +}; + +static int dib807x_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset = dib0070_wbd_offset(fe); + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + switch (band) { + case BAND_VHF: + offset += 750; + break; + case BAND_UHF: /* fall-thru wanted */ + default: + offset += 250; break; + } + deb_info("WBD for DiB8000: %d\n", offset); + dib8000_set_wbd_ref(fe, offset); + + return state->set_param_save(fe); +} + +static int dib807x_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (adap->id == 0) { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, + &dib807x_dib0070_config[0]) == NULL) + return -ENODEV; + } else { + if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, + &dib807x_dib0070_config[1]) == NULL) + return -ENODEV; + } + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override; + return 0; +} + +static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index, + u16 pid, int onoff) +{ + return dib8000_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter, + int onoff) +{ + return dib8000_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +/* STK807x */ +static int stk807x_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, + &dib807x_dib8000_config[0]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* STK807xPVR */ +static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(500); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + /* initialize IC 0 */ + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, + &dib807x_dib8000_config[0]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) +{ + /* initialize IC 1 */ + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, + &dib807x_dib8000_config[1]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* STK8096GP */ +static struct dibx000_agc_config dib8090_agc_config[2] = { + { + BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 787, + 10, + + 0, + 118, + + 0, + 3530, + 1, + 5, + + 65535, + 0, + + 65535, + 0, + + 0, + 32, + 114, + 143, + 144, + 114, + 227, + 116, + 117, + + 28, + 26, + 31, + 51, + + 0, + }, + { + BAND_CBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) + | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + 787, + 10, + + 0, + 118, + + 0, + 3530, + 1, + 5, + + 0, + 0, + + 65535, + 0, + + 0, + 32, + 114, + 143, + 144, + 114, + 227, + 116, + 117, + + 28, + 26, + 31, + 51, + + 0, + } +}; + +static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = { + 54000, 13500, + 1, 18, 3, 1, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (599 << 0), + (0 << 25) | 0, + 20199727, + 12000000, +}; + +static int dib8090_get_adc_power(struct dvb_frontend *fe) +{ + return dib8000_get_adc_power(fe, 1); +} + +static struct dib8000_config dib809x_dib8000_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib8090_agc_config, + .agc_control = dib0090_dcc_freq, + .pll = &dib8090_pll_config_12mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 0x31, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + .diversity_delay = 48, + .refclksel = 3, + }, { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib8090_agc_config, + .agc_control = dib0090_dcc_freq, + .pll = &dib8090_pll_config_12mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 0x31, + .output_mode = OUTMODE_DIVERSITY, + .drives = 0x2d08, + .diversity_delay = 1, + .refclksel = 3, + } +}; + +static struct dib0090_wbd_slope dib8090_wbd_table[] = { + /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */ + { 120, 0, 500, 0, 500, 4 }, /* CBAND */ + { 170, 0, 450, 0, 450, 4 }, /* CBAND */ + { 380, 48, 373, 28, 259, 6 }, /* VHF */ + { 860, 34, 700, 36, 616, 6 }, /* high UHF */ + { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */ +}; + +static struct dib0090_config dib809x_dib0090_config = { + .io.pll_bypass = 1, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 20, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 12000, + .reset = dib80xx_tuner_reset, + .sleep = dib80xx_tuner_sleep, + .clkouttobamse = 1, + .analog_output = 1, + .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS, + .use_pwm_agc = 1, + .clkoutdrive = 1, + .get_adc_power = dib8090_get_adc_power, + .freq_offset_khz_uhf = -63, + .freq_offset_khz_vhf = -143, + .wbd = dib8090_wbd_table, + .fref_clock_ratio = 6, +}; + +static int dib8096_set_param_override(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + u8 band = BAND_OF_FREQUENCY(p->frequency/1000); + u16 target; + int ret = 0; + enum frontend_tune_state tune_state = CT_SHUTDOWN; + u16 ltgain, rf_gain_limit; + + ret = state->set_param_save(fe); + if (ret < 0) + return ret; + + target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2; + dib8000_set_wbd_ref(fe, target); + + + if (band == BAND_CBAND) { + deb_info("tuning in CBAND - soft-AGC startup\n"); + dib0090_set_tune_state(fe, CT_AGC_START); + do { + ret = dib0090_gain_control(fe); + msleep(ret); + tune_state = dib0090_get_tune_state(fe); + if (tune_state == CT_AGC_STEP_0) + dib8000_set_gpio(fe, 6, 0, 1); + else if (tune_state == CT_AGC_STEP_1) { + dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain); + if (rf_gain_limit == 0) + dib8000_set_gpio(fe, 6, 0, 0); + } + } while (tune_state < CT_AGC_STOP); + dib0090_pwm_gain_reset(fe); + dib8000_pwm_agc_reset(fe); + dib8000_set_tune_state(fe, CT_DEMOD_START); + } else { + deb_info("not tuning in CBAND - standard AGC startup\n"); + dib0090_pwm_gain_reset(fe); + } + + return 0; +} + +static int dib809x_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; + return 0; +} + +static int stk809x_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c; + struct dvb_frontend *fe_slave = dib8000_get_slave_frontend(adap->fe_adap[0].fe, 1); + + if (fe_slave) { + tun_i2c = dib8000_get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1); + if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL) + return -ENODEV; + fe_slave->dvb = adap->fe_adap[0].fe->dvb; + fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override; + } + tun_i2c = dib8000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; + + return 0; +} + +static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe_slave; + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(1000); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + fe_slave = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]); + dib8000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave); + + return fe_slave == NULL ? -ENODEV : 0; +} + +/* TFE8096P */ +static struct dibx000_agc_config dib8096p_agc_config[2] = { + { + .band_caps = BAND_UHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) + | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) + | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 684, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 0, + + .agc2_max = 32767, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 0, + .agc1_pt3 = 105, + .agc1_slope1 = 0, + .agc1_slope2 = 156, + .agc2_pt1 = 105, + .agc2_pt2 = 255, + .agc2_slope1 = 54, + .agc2_slope2 = 0, + + .alpha_mant = 28, + .alpha_exp = 26, + .beta_mant = 31, + .beta_exp = 51, + + .perform_agc_softsplit = 0, + } , { + .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) + | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) + | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 732, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 0, + + .agc2_max = 32767, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 0, + .agc1_pt3 = 98, + .agc1_slope1 = 0, + .agc1_slope2 = 167, + .agc2_pt1 = 98, + .agc2_pt2 = 255, + .agc2_slope1 = 52, + .agc2_slope2 = 0, + + .alpha_mant = 28, + .alpha_exp = 26, + .beta_mant = 31, + .beta_exp = 51, + + .perform_agc_softsplit = 0, + } +}; + +static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = { + 108000, 13500, + 1, 9, 1, 0, 0, + 0, 0, 0, 0, 2, + (3 << 14) | (1 << 12) | (524 << 0), + (0 << 25) | 0, + 20199729, + 12000000, +}; + +static struct dib8000_config tfe8096p_dib8000_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .update_lna = NULL, + + .agc_config_count = 2, + .agc = dib8096p_agc_config, + .pll = &dib8096p_clock_config_12_mhz, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .agc_control = NULL, + .diversity_delay = 48, + .output_mode = OUTMODE_MPEG2_FIFO, + .enMpegOutput = 1, +}; + +static struct dib0090_wbd_slope dib8096p_wbd_table[] = { + { 380, 81, 850, 64, 540, 4}, + { 860, 51, 866, 21, 375, 4}, + {1700, 0, 250, 0, 100, 6}, + {2600, 0, 250, 0, 100, 6}, + { 0xFFFF, 0, 0, 0, 0, 0}, +}; + +static const struct dib0090_config tfe8096p_dib0090_config = { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib8096p_tuner_sleep, + .sleep = dib8096p_tuner_sleep, + + .freq_offset_khz_uhf = -143, + .freq_offset_khz_vhf = -143, + + .get_adc_power = dib8090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 1, + + .wbd = dib8096p_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + .force_cband_input = 0, +}; + +struct dibx090p_adc { + u32 freq; /* RF freq MHz */ + u32 timf; /* New Timf */ + u32 pll_loopdiv; /* New prediv */ + u32 pll_prediv; /* New loopdiv */ +}; + +struct dibx090p_adc dib8090p_adc_tab[] = { + { 50000, 17043521, 16, 3}, /* 64 MHz */ + {878000, 20199729, 9, 1}, /* 60 MHz */ + {0xffffffff, 0, 0, 0}, /* 60 MHz */ +}; + +static int dib8096p_agc_startup(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + struct dibx000_bandwidth_config pll; + u16 target; + int better_sampling_freq = 0, ret; + struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0]; + + ret = state->set_param_save(fe); + if (ret < 0) + return ret; + memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); + + dib0090_pwm_gain_reset(fe); + /* dib0090_get_wbd_target is returning any possible + temperature compensated wbd-target */ + target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; + dib8000_set_wbd_ref(fe, target); + + + while (p->frequency / 1000 > adc_table->freq) { + better_sampling_freq = 1; + adc_table++; + } + + if ((adc_table->freq != 0xffffffff) && better_sampling_freq) { + pll.pll_ratio = adc_table->pll_loopdiv; + pll.pll_prediv = adc_table->pll_prediv; + dib8000_update_pll(fe, &pll); + dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc_table->timf); + } + return 0; +} + +static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1); + + adap->fe_adap[0].fe = dvb_attach(dib8000_attach, + &adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib8096p_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, + &tfe8096p_dib0090_config) == NULL) + return -ENODEV; + + dib8000_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup; + return 0; +} + +/* STK9090M */ +static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) +{ + return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); +} + +static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) +{ + return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); +} + +static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib9000_set_gpio(fe, 5, 0, !onoff); +} + +static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return dib9000_set_gpio(fe, 0, 0, onoff); +} + +static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len) +{ + u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 }; + u8 rb[2]; + struct i2c_msg msg[2] = { + {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2}, + {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2}, + }; + u8 index_data; + + dibx000_i2c_set_speed(i2c, 250); + + if (i2c_transfer(i2c, msg, 2) != 2) + return -EIO; + + switch (rb[0] << 8 | rb[1]) { + case 0: + deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n"); + return -EIO; + case 1: + deb_info("Found DiB0170 rev2"); + break; + case 2: + deb_info("Found DiB0190 rev2"); + break; + default: + deb_info("DiB01x0 not found"); + return -EIO; + } + + for (index_data = 0; index_data < len; index_data += 2) { + wb[2] = (data[index_data + 1] >> 8) & 0xff; + wb[3] = (data[index_data + 1]) & 0xff; + + if (data[index_data] == 0) { + wb[0] = (data[index_data] >> 8) & 0xff; + wb[1] = (data[index_data]) & 0xff; + msg[0].len = 2; + if (i2c_transfer(i2c, msg, 2) != 2) + return -EIO; + wb[2] |= rb[0]; + wb[3] |= rb[1] & ~(3 << 4); + } + + wb[0] = (data[index_data] >> 8)&0xff; + wb[1] = (data[index_data])&0xff; + msg[0].len = 4; + if (i2c_transfer(i2c, &msg[0], 1) != 1) + return -EIO; + } + return 0; +} + +static struct dib9000_config stk9090m_config = { + .output_mpeg2_in_188_bytes = 1, + .output_mode = OUTMODE_MPEG2_FIFO, + .vcxo_timer = 279620, + .timing_frequency = 20452225, + .demod_clock_khz = 60000, + .xtal_clock_khz = 30000, + .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), + .subband = { + 2, + { + { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */ + { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */ + { 0 }, + }, + }, + .gpio_function = { + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, + }, +}; + +static struct dib9000_config nim9090md_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + .output_mode = OUTMODE_MPEG2_FIFO, + .vcxo_timer = 279620, + .timing_frequency = 20452225, + .demod_clock_khz = 60000, + .xtal_clock_khz = 30000, + .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), + }, { + .output_mpeg2_in_188_bytes = 1, + .output_mode = OUTMODE_DIVERSITY, + .vcxo_timer = 279620, + .timing_frequency = 20452225, + .demod_clock_khz = 60000, + .xtal_clock_khz = 30000, + .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), + .subband = { + 2, + { + { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */ + { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */ + { 0 }, + }, + }, + .gpio_function = { + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, + { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, + }, + } +}; + +static struct dib0090_config dib9090_dib0090_config = { + .io.pll_bypass = 0, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 8, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 30000, + .reset = dib90x0_tuner_reset, + .sleep = dib90x0_tuner_sleep, + .clkouttobamse = 0, + .analog_output = 0, + .use_pwm_agc = 0, + .clkoutdrive = 0, + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, +}; + +static struct dib0090_config nim9090md_dib0090_config[2] = { + { + .io.pll_bypass = 0, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 8, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 30000, + .reset = dib90x0_tuner_reset, + .sleep = dib90x0_tuner_sleep, + .clkouttobamse = 1, + .analog_output = 0, + .use_pwm_agc = 0, + .clkoutdrive = 0, + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + }, { + .io.pll_bypass = 0, + .io.pll_range = 1, + .io.pll_prediv = 1, + .io.pll_loopdiv = 8, + .io.adc_clock_ratio = 8, + .io.pll_int_loop_filt = 0, + .io.clock_khz = 30000, + .reset = dib90x0_tuner_reset, + .sleep = dib90x0_tuner_sleep, + .clkouttobamse = 0, + .analog_output = 0, + .use_pwm_agc = 0, + .clkoutdrive = 0, + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + } +}; + + +static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct dib0700_state *st = adap->dev->priv; + u32 fw_version; + + /* Make use of the new i2c functions from FW 1.20 */ + dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); + if (fw_version >= 0x10200) + st->fw_use_new_i2c_api = 1; + dib0700_set_i2c_speed(adap->dev, 340); + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80); + + if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { + deb_info("%s: Upload failed. (file not found?)\n", __func__); + return -ENODEV; + } else { + deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size); + } + stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size; + stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data; + + adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int dib9090_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); + u16 data_dib190[10] = { + 1, 0x1374, + 2, 0x01a2, + 7, 0x0020, + 0, 0x00ef, + 8, 0x0486, + }; + + if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL) + return -ENODEV; + i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); + if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0) + return -ENODEV; + dib0700_set_i2c_speed(adap->dev, 1500); + if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) + return -ENODEV; + release_firmware(state->frontend_firmware); + return 0; +} + +static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct dib0700_state *st = adap->dev->priv; + struct i2c_adapter *i2c; + struct dvb_frontend *fe_slave; + u32 fw_version; + + /* Make use of the new i2c functions from FW 1.20 */ + dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); + if (fw_version >= 0x10200) + st->fw_use_new_i2c_api = 1; + dib0700_set_i2c_speed(adap->dev, 340); + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { + deb_info("%s: Upload failed. (file not found?)\n", __func__); + return -EIO; + } else { + deb_info("%s: firmware read %Zu bytes.\n", __func__, state->frontend_firmware->size); + } + nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size; + nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data; + nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size; + nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data; + + dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80); + adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]); + + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0); + dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82); + + fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]); + dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave); + + return fe_slave == NULL ? -ENODEV : 0; +} + +static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *state = adap->priv; + struct i2c_adapter *i2c; + struct dvb_frontend *fe_slave; + u16 data_dib190[10] = { + 1, 0x5374, + 2, 0x01ae, + 7, 0x0020, + 0, 0x00ef, + 8, 0x0406, + }; + i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); + if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL) + return -ENODEV; + i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); + if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0) + return -ENODEV; + + dib0700_set_i2c_speed(adap->dev, 1500); + if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) + return -ENODEV; + + fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1); + if (fe_slave != NULL) { + i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe); + dib9000_set_i2c_adapter(fe_slave, i2c); + + i2c = dib9000_get_tuner_interface(fe_slave); + if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL) + return -ENODEV; + fe_slave->dvb = adap->fe_adap[0].fe->dvb; + dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500); + if (dib9000_firmware_post_pll_init(fe_slave) < 0) + return -ENODEV; + } + release_firmware(state->frontend_firmware); + + return 0; +} + +/* NIM7090 */ +struct dib7090p_best_adc { + u32 timf; + u32 pll_loopdiv; + u32 pll_prediv; +}; + +static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dib7090p_best_adc *adc) +{ + u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1; + + u16 xtal = 12000; + u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */ + u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */ + u32 fdem_max = 76000; + u32 fdem_min = 69500; + u32 fcp = 0, fs = 0, fdem = 0; + u32 harmonic_id = 0; + + adc->pll_loopdiv = loopdiv; + adc->pll_prediv = prediv; + adc->timf = 0; + + deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min); + + /* Find Min and Max prediv */ + while ((xtal/max_prediv) >= fcp_min) + max_prediv++; + + max_prediv--; + min_prediv = max_prediv; + while ((xtal/min_prediv) <= fcp_max) { + min_prediv--; + if (min_prediv == 1) + break; + } + deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv); + + min_prediv = 2; + + for (prediv = min_prediv ; prediv < max_prediv; prediv++) { + fcp = xtal / prediv; + if (fcp > fcp_min && fcp < fcp_max) { + for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) { + fdem = ((xtal/prediv) * loopdiv); + fs = fdem / 4; + /* test min/max system restrictions */ + + if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) { + spur = 0; + /* test fs harmonics positions */ + for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) { + if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) { + spur = 1; + break; + } + } + + if (!spur) { + adc->pll_loopdiv = loopdiv; + adc->pll_prediv = prediv; + adc->timf = 2396745143UL/fdem*(1 << 9); + adc->timf += ((2396745143UL%fdem) << 9)/fdem; + deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf); + break; + } + } + } + } + if (!spur) + break; + } + + + if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0) + return -EINVAL; + else + return 0; +} + +static int dib7090_agc_startup(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + struct dibx000_bandwidth_config pll; + u16 target; + struct dib7090p_best_adc adc; + int ret; + + ret = state->set_param_save(fe); + if (ret < 0) + return ret; + + memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); + dib0090_pwm_gain_reset(fe); + target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; + dib7000p_set_wbd_ref(fe, target); + + if (dib7090p_get_best_sampling(fe, &adc) == 0) { + pll.pll_ratio = adc.pll_loopdiv; + pll.pll_prediv = adc.pll_prediv; + + dib7000p_update_pll(fe, &pll); + dib7000p_ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf); + } + return 0; +} + +static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart) +{ + deb_info("AGC restart callback: %d", restart); + if (restart == 0) /* before AGC startup */ + dib0090_set_dc_servo(fe, 1); + return 0; +} + +static int dib7090e_update_lna(struct dvb_frontend *fe, u16 agc_global) +{ + u16 agc1 = 0, agc2, wbd = 0, wbd_target, wbd_offset, threshold_agc1; + s16 wbd_delta; + + if ((fe->dtv_property_cache.frequency) < 400000000) + threshold_agc1 = 25000; + else + threshold_agc1 = 30000; + + wbd_target = (dib0090_get_wbd_target(fe)*8+1)/2; + wbd_offset = dib0090_get_wbd_offset(fe); + dib7000p_get_agc_values(fe, NULL, &agc1, &agc2, &wbd); + wbd_delta = (s16)wbd - (((s16)wbd_offset+10)*4) ; + + deb_info("update lna, agc_global=%d agc1=%d agc2=%d", + agc_global, agc1, agc2); + deb_info("update lna, wbd=%d wbd target=%d wbd offset=%d wbd delta=%d", + wbd, wbd_target, wbd_offset, wbd_delta); + + if ((agc1 < threshold_agc1) && (wbd_delta > 0)) { + dib0090_set_switch(fe, 1, 1, 1); + dib0090_set_vga(fe, 0); + dib0090_update_rframp_7090(fe, 0); + dib0090_update_tuning_table_7090(fe, 0); + } else { + dib0090_set_vga(fe, 1); + dib0090_update_rframp_7090(fe, 1); + dib0090_update_tuning_table_7090(fe, 1); + dib0090_set_switch(fe, 0, 0, 0); + } + + return 0; +} + +static struct dib0090_wbd_slope dib7090_wbd_table[] = { + { 380, 81, 850, 64, 540, 4}, + { 860, 51, 866, 21, 375, 4}, + {1700, 0, 250, 0, 100, 6}, + {2600, 0, 250, 0, 100, 6}, + { 0xFFFF, 0, 0, 0, 0, 0}, +}; + +static struct dib0090_wbd_slope dib7090e_wbd_table[] = { + { 380, 81, 850, 64, 540, 4}, + { 700, 51, 866, 21, 320, 4}, + { 860, 48, 666, 18, 330, 6}, + {1700, 0, 250, 0, 100, 6}, + {2600, 0, 250, 0, 100, 6}, + { 0xFFFF, 0, 0, 0, 0, 0}, +}; + +static struct dibx000_agc_config dib7090_agc_config[2] = { + { + .band_caps = BAND_UHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 687, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 0, + + .agc2_max = 65535, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 32, + .agc1_pt3 = 114, + .agc1_slope1 = 143, + .agc1_slope2 = 144, + .agc2_pt1 = 114, + .agc2_pt2 = 227, + .agc2_slope1 = 116, + .agc2_slope2 = 117, + + .alpha_mant = 18, + .alpha_exp = 0, + .beta_mant = 20, + .beta_exp = 59, + + .perform_agc_softsplit = 0, + } , { + .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ + .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), + + .inv_gain = 732, + .time_stabiliz = 10, + + .alpha_level = 0, + .thlock = 118, + + .wbd_inv = 0, + .wbd_ref = 1200, + .wbd_sel = 3, + .wbd_alpha = 5, + + .agc1_max = 65535, + .agc1_min = 0, + + .agc2_max = 65535, + .agc2_min = 0, + + .agc1_pt1 = 0, + .agc1_pt2 = 0, + .agc1_pt3 = 98, + .agc1_slope1 = 0, + .agc1_slope2 = 167, + .agc2_pt1 = 98, + .agc2_pt2 = 255, + .agc2_slope1 = 104, + .agc2_slope2 = 0, + + .alpha_mant = 18, + .alpha_exp = 0, + .beta_mant = 20, + .beta_exp = 59, + + .perform_agc_softsplit = 0, + } +}; + +static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = { + 60000, 15000, + 1, 5, 0, 0, 0, + 0, 0, 1, 1, 2, + (3 << 14) | (1 << 12) | (524 << 0), + (0 << 25) | 0, + 20452225, + 15000000, +}; + +static struct dib7000p_config nim7090_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = NULL, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_FIFO, + .enMpegOutput = 1, +}; + +static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = NULL, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .default_i2c_addr = 0x90, + .enMpegOutput = 1, + }, { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = NULL, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .default_i2c_addr = 0x92, + .enMpegOutput = 0, + } +}; + +static struct dib7000p_config tfe7090e_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = dib7090e_update_lna, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_FIFO, + .enMpegOutput = 1, +}; + +static const struct dib0090_config nim7090_dib0090_config = { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, +}; + +static const struct dib0090_config tfe7090e_dib0090_config = { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090e_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + .force_cband_input = 1, + .is_dib7090e = 1, +}; + +static struct dib7000p_config tfe7790e_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 1, + .update_lna = dib7090e_update_lna, + + .agc_config_count = 2, + .agc = dib7090_agc_config, + + .bw = &dib7090_clock_config_12_mhz, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + + .agc_control = dib7090_agc_restart, + + .spur_protect = 0, + .disable_sample_and_hold = 0, + .enable_current_mirror = 0, + .diversity_delay = 0, + + .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, + .enMpegOutput = 1, +}; + +static const struct dib0090_config tfe7790e_dib0090_config = { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = 0, + .freq_offset_khz_vhf = 0, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090e_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + .force_cband_input = 1, + .is_dib7090e = 1, + .force_crystal_mode = 1, +}; + +static const struct dib0090_config tfe7090pvr_dib0090_config[2] = { + { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = 50, + .freq_offset_khz_vhf = 70, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + }, { + .io.clock_khz = 12000, + .io.pll_bypass = 0, + .io.pll_range = 0, + .io.pll_prediv = 3, + .io.pll_loopdiv = 6, + .io.adc_clock_ratio = 0, + .io.pll_int_loop_filt = 0, + .reset = dib7090_tuner_sleep, + .sleep = dib7090_tuner_sleep, + + .freq_offset_khz_uhf = -50, + .freq_offset_khz_vhf = -70, + + .get_adc_power = dib7090_get_adc_power, + + .clkouttobamse = 1, + .analog_output = 0, + + .wbd_vhf_offset = 0, + .wbd_cband_offset = 0, + .use_pwm_agc = 1, + .clkoutdrive = 0, + + .fref_clock_ratio = 0, + + .wbd = dib7090_wbd_table, + + .ls_cfg_pad_drv = 0, + .data_tx_drv = 0, + .low_if = NULL, + .in_soc = 1, + } +}; + +static int nim7090_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int nim7090_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* The TFE7090 requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + /* initialize IC 0 */ + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + + dib0700_set_i2c_speed(adap->dev, 340); + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]); + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + dib7090_slave_reset(adap->fe_adap[0].fe); + + return 0; +} + +static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *i2c; + + if (adap->dev->adapter[0].fe_adap[0].fe == NULL) { + err("the master dib7090 has to be initialized first"); + return -ENODEV; /* the master device has not been initialized */ + } + + i2c = dib7000p_get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); + if (dib7000p_i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, i2c, 0x92, &tfe7090pvr_dib7000p_config[1]); + dib0700_set_i2c_speed(adap->dev, 200); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +static int tfe7090e_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + msleep(20); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, + 1, 0x10, &tfe7090e_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, + 0x80, &tfe7090e_dib7000p_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int tfe7790e_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* The TFE7790E requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(20); + dib0700_ctrl_clock(adap->dev, 72, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(20); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, + 1, 0x10, &tfe7790e_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, + 0x80, &tfe7790e_dib7000p_config); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int tfe7790e_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = + dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, + &tfe7790e_dib0090_config) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +static int tfe7090e_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = + dib7090_get_i2c_tuner(adap->fe_adap[0].fe); + + if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, + &tfe7090e_dib0090_config) == NULL) + return -ENODEV; + + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + + st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; + adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; + return 0; +} + +/* STK7070PD */ +static struct dib7000p_config stk7070pd_dib7000p_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + }, { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + } +}; + +static void stk7070pd_init(struct dvb_usb_device *dev) +{ + dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(dev, 72, 1); + + msleep(10); + dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1); +} + +static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap) +{ + stk7070pd_init(adap->dev); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, + stk7070pd_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) +{ + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int novatd_read_status_override(struct dvb_frontend *fe, + fe_status_t *stat) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *dev = adap->dev; + struct dib0700_state *state = dev->priv; + int ret; + + ret = state->read_status(fe, stat); + + if (!ret) + dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, + !!(*stat & FE_HAS_LOCK)); + + return ret; +} + +static int novatd_sleep_override(struct dvb_frontend* fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dvb_usb_device *dev = adap->dev; + struct dib0700_state *state = dev->priv; + + /* turn off LED */ + dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0); + + return state->sleep(fe); +} + +/** + * novatd_frontend_attach - Nova-TD specific attach + * + * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for + * information purposes. + */ +static int novatd_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *dev = adap->dev; + struct dib0700_state *st = dev->priv; + + if (adap->id == 0) { + stk7070pd_init(dev); + + /* turn the power LED on, the other two off (just in case) */ + dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0); + dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0); + dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&dev->i2c_adap, 2, 18, + stk7070pd_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &dev->i2c_adap, + adap->id == 0 ? 0x80 : 0x82, + &stk7070pd_dib7000p_config[adap->id]); + + if (adap->fe_adap[0].fe == NULL) + return -ENODEV; + + st->read_status = adap->fe_adap[0].fe->ops.read_status; + adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override; + st->sleep = adap->fe_adap[0].fe->ops.sleep; + adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override; + + return 0; +} + +/* S5H1411 */ +static struct s5h1411_config pinnacle_801e_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +/* Pinnacle PCTV HD Pro 801e GPIOs map: + GPIO0 - currently unknown + GPIO1 - xc5000 tuner reset + GPIO2 - CX25843 sleep + GPIO3 - currently unknown + GPIO4 - currently unknown + GPIO6 - currently unknown + GPIO7 - currently unknown + GPIO9 - currently unknown + GPIO10 - CX25843 reset + */ +static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Make use of the new i2c functions from FW 1.20 */ + st->fw_use_new_i2c_api = 1; + + /* The s5h1411 requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + /* All msleep values taken from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(400); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(60); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); + msleep(30); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* GPIOs are initialized, do the attach */ + adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, + &adap->dev->i2c_adap); + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int dib0700_xc5000_tuner_callback(void *priv, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + if (command == XC5000_TUNER_RESET) { + /* Reset the tuner */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); + msleep(10); + } else { + err("xc5000: unknown tuner callback command: %d\n", command); + return -EINVAL; + } + + return 0; +} + +static struct xc5000_config s5h1411_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, +}; + +static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) +{ + /* FIXME: generalize & move to common area */ + adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback; + + return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, + &s5h1411_xc5000_tunerconfig) + == NULL ? -ENODEV : 0; +} + +static int dib0700_xc4000_tuner_callback(void *priv, int component, + int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + if (command == XC4000_TUNER_RESET) { + /* Reset the tuner */ + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 0); + msleep(10); + dib7000p_set_gpio(adap->fe_adap[0].fe, 8, 0, 1); + } else { + err("xc4000: unknown tuner callback command: %d\n", command); + return -EINVAL; + } + + return 0; +} + +static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = { + .band_caps = BAND_UHF | BAND_VHF, + .setup = 0x64, + .inv_gain = 0x02c8, + .time_stabiliz = 0x15, + .alpha_level = 0x00, + .thlock = 0x76, + .wbd_inv = 0x01, + .wbd_ref = 0x0b33, + .wbd_sel = 0x00, + .wbd_alpha = 0x02, + .agc1_max = 0x00, + .agc1_min = 0x00, + .agc2_max = 0x9b26, + .agc2_min = 0x26ca, + .agc1_pt1 = 0x00, + .agc1_pt2 = 0x00, + .agc1_pt3 = 0x00, + .agc1_slope1 = 0x00, + .agc1_slope2 = 0x00, + .agc2_pt1 = 0x00, + .agc2_pt2 = 0x80, + .agc2_slope1 = 0x1d, + .agc2_slope2 = 0x1d, + .alpha_mant = 0x11, + .alpha_exp = 0x1b, + .beta_mant = 0x17, + .beta_exp = 0x33, + .perform_agc_softsplit = 0x00, +}; + +static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = { + 60000, 30000, /* internal, sampling */ + 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */ + 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, */ + /* ADClkSrc, modulo */ + (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */ + 39370534, /* ifreq */ + 20452225, /* timf */ + 30000000 /* xtal */ +}; + +/* FIXME: none of these inputs are validated yet */ +static struct dib7000p_config pctv_340e_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &stk7700p_7000p_xc4000_agc_config, + .bw = &stk7700p_xc4000_pll_config, + + .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, +}; + +/* PCTV 340e GPIOs map: + dib0700: + GPIO2 - CX25843 sleep + GPIO3 - CS5340 reset + GPIO5 - IRD + GPIO6 - Power Supply + GPIO8 - LNA (1=off 0=on) + GPIO10 - CX25843 reset + dib7000: + GPIO8 - xc4000 reset + */ +static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Power Supply on */ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(50); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(100); /* Allow power supply to settle before probing */ + + /* cx25843 reset */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(1); /* cx25843 datasheet say 350us required */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + + /* LNA off for now */ + dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* FIXME: not verified yet */ + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(500); + + if (dib7000pc_detection(&adap->dev->i2c_adap) == 0) { + /* Demodulator not found for some reason? */ + return -ENODEV; + } + + adap->fe_adap[0].fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x12, + &pctv_340e_config); + st->is_dib7000pc = 1; + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static struct xc4000_config dib7000p_xc4000_tunerconfig = { + .i2c_address = 0x61, + .default_pm = 1, + .dvb_amplitude = 0, + .set_smoothedcvbs = 0, + .if_khz = 5400 +}; + +static int xc4000_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct i2c_adapter *tun_i2c; + + /* The xc4000 is not on the main i2c bus */ + tun_i2c = dib7000p_get_i2c_master(adap->fe_adap[0].fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + if (tun_i2c == NULL) { + printk(KERN_ERR "Could not reach tuner i2c bus\n"); + return 0; + } + + /* Setup the reset callback */ + adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback; + + return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c, + &dib7000p_xc4000_tunerconfig) + == NULL ? -ENODEV : 0; +} + +static struct lgdt3305_config hcw_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_PARALLEL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_LOW, + .deny_i2c_rptr = 0, + .spectral_inversion = 1, + .qam_if_khz = 6000, + .vsb_if_khz = 6000, + .usref_8vsb = 0x0500, +}; + +static struct mxl5007t_config hcw_mxl5007t_config = { + .xtal_freq_hz = MxL_XTAL_25_MHZ, + .if_freq_hz = MxL_IF_6_MHZ, + .invert_if = 1, +}; + +/* TIGER-ATSC map: + GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled) + GPIO1 - ANT_SEL (H: VPA, L: MCX) + GPIO4 - SCL2 + GPIO6 - EN_TUNER + GPIO7 - SDA2 + GPIO10 - DEM_RST + + MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB + */ +static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Make use of the new i2c functions from FW 1.20 */ + st->fw_use_new_i2c_api = 1; + + st->disable_streaming_master_mode = 1; + + /* fe power enable */ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(30); + + /* demod reset */ + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + + adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach, + &hcw_lgdt3305_config, + &adap->dev->i2c_adap); + + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap) +{ + return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, 0x60, + &hcw_mxl5007t_config) == NULL ? -ENODEV : 0; +} + + +/* DVB-USB and USB stuff follows */ +struct usb_device_id dib0700_usb_id_table[] = { +/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, +/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) }, + { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, + { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, +/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) }, +/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) }, + { USB_DEVICE(USB_VID_PINNACLE, + USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) }, + { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) }, +/* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) }, + { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) }, +/* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) }, +/* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, +/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, +/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) }, + { USB_DEVICE(USB_VID_TERRATEC, + USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) }, + { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) }, +/* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) }, + { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) }, + { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) }, +/* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) }, + { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) }, + { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) }, +/* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) }, + { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) }, + { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) }, +/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) }, + { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) }, + { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) }, +/* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) }, + { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090M) }, +/* 70 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM8096MD) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM9090MD) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_NIM7090) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090PVR) }, + { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2) }, +/* 75 */{ USB_DEVICE(USB_VID_MEDION, USB_PID_CREATIX_CTX1921) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090E) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790E) }, +/* 80 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) }, + { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) }, + { 0 } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); + +#define DIB0700_DEFAULT_DEVICE_PROPERTIES \ + .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ + .usb_ctrl = DEVICE_SPECIFIC, \ + .firmware = "dvb-usb-dib0700-1.20.fw", \ + .download_firmware = dib0700_download_firmware, \ + .no_reconnect = 1, \ + .size_of_priv = sizeof(struct dib0700_state), \ + .i2c_algo = &dib0700_i2c_algo, \ + .identify_state = dib0700_identify_state + +#define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \ + .streaming_ctrl = dib0700_streaming_ctrl, \ + .stream = { \ + .type = USB_BULK, \ + .count = 4, \ + .endpoint = ep, \ + .u = { \ + .bulk = { \ + .buffersize = 39480, \ + } \ + } \ + } + +struct dvb_usb_device_properties dib0700_devices[] = { + { + DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk7700p_pid_filter, + .pid_filter_ctrl = stk7700p_pid_filter_ctrl, + .frontend_attach = stk7700p_frontend_attach, + .tuner_attach = stk7700p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, + }, + + .num_device_descs = 8, + .devices = { + { "DiBcom STK7700P reference design", + { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] }, + { NULL }, + }, + { "Hauppauge Nova-T Stick", + { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL }, + { NULL }, + }, + { "AVerMedia AVerTV DVB-T Volar", + { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] }, + { NULL }, + }, + { "Compro Videomate U500", + { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] }, + { NULL }, + }, + { "Uniwill STK7700P based (Hama and others)", + { &dib0700_usb_id_table[7], NULL }, + { NULL }, + }, + { "Leadtek Winfast DTV Dongle (STK7700P based)", + { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, + { NULL }, + }, + { "AVerMedia AVerTV DVB-T Express", + { &dib0700_usb_id_table[20] }, + { NULL }, + }, + { "Gigabyte U7000", + { &dib0700_usb_id_table[21], NULL }, + { NULL }, + } + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = bristol_frontend_attach, + .tuner_attach = bristol_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, { + .num_frontends = 1, + .fe = {{ + .frontend_attach = bristol_frontend_attach, + .tuner_attach = bristol_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + } + }, + + .num_device_descs = 1, + .devices = { + { "Hauppauge Nova-T 500 Dual DVB-T", + { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700d_frontend_attach, + .tuner_attach = stk7700d_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700d_frontend_attach, + .tuner_attach = stk7700d_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + } + }, + + .num_device_descs = 5, + .devices = { + { "Pinnacle PCTV 2000e", + { &dib0700_usb_id_table[11], NULL }, + { NULL }, + }, + { "Terratec Cinergy DT XS Diversity", + { &dib0700_usb_id_table[12], NULL }, + { NULL }, + }, + { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity", + { &dib0700_usb_id_table[13], NULL }, + { NULL }, + }, + { "DiBcom STK7700D reference design", + { &dib0700_usb_id_table[14], NULL }, + { NULL }, + }, + { "YUAN High-Tech DiBcom STK7700D", + { &dib0700_usb_id_table[55], NULL }, + { NULL }, + }, + + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700P2_frontend_attach, + .tuner_attach = stk7700d_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + }, + }, + + .num_device_descs = 3, + .devices = { + { "ASUS My Cinema U3000 Mini DVBT Tuner", + { &dib0700_usb_id_table[23], NULL }, + { NULL }, + }, + { "Yuan EC372S", + { &dib0700_usb_id_table[31], NULL }, + { NULL }, + }, + { "Terratec Cinergy T Express", + { &dib0700_usb_id_table[42], NULL }, + { NULL }, + } + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070p_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 12, + .devices = { + { "DiBcom STK7070P reference design", + { &dib0700_usb_id_table[15], NULL }, + { NULL }, + }, + { "Pinnacle PCTV DVB-T Flash Stick", + { &dib0700_usb_id_table[16], NULL }, + { NULL }, + }, + { "Artec T14BR DVB-T", + { &dib0700_usb_id_table[22], NULL }, + { NULL }, + }, + { "ASUS My Cinema U3100 Mini DVBT Tuner", + { &dib0700_usb_id_table[24], NULL }, + { NULL }, + }, + { "Hauppauge Nova-T Stick", + { &dib0700_usb_id_table[25], NULL }, + { NULL }, + }, + { "Hauppauge Nova-T MyTV.t", + { &dib0700_usb_id_table[26], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 72e", + { &dib0700_usb_id_table[29], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 73e", + { &dib0700_usb_id_table[30], NULL }, + { NULL }, + }, + { "Elgato EyeTV DTT", + { &dib0700_usb_id_table[49], NULL }, + { NULL }, + }, + { "Yuan PD378S", + { &dib0700_usb_id_table[45], NULL }, + { NULL }, + }, + { "Elgato EyeTV Dtt Dlx PD378S", + { &dib0700_usb_id_table[50], NULL }, + { NULL }, + }, + { "Elgato EyeTV DTT rev. 2", + { &dib0700_usb_id_table[81], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070p_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 3, + .devices = { + { "Pinnacle PCTV 73A", + { &dib0700_usb_id_table[56], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 73e SE", + { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 282e", + { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = novatd_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = novatd_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + } + }, + + .num_device_descs = 1, + .devices = { + { "Hauppauge Nova-TD Stick (52009)", + { &dib0700_usb_id_table[35], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach0, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach1, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + } + }, + + .num_device_descs = 5, + .devices = { + { "DiBcom STK7070PD reference design", + { &dib0700_usb_id_table[17], NULL }, + { NULL }, + }, + { "Pinnacle PCTV Dual DVB-T Diversity Stick", + { &dib0700_usb_id_table[18], NULL }, + { NULL }, + }, + { "Hauppauge Nova-TD-500 (84xxx)", + { &dib0700_usb_id_table[36], NULL }, + { NULL }, + }, + { "Terratec Cinergy DT USB XS Diversity/ T5", + { &dib0700_usb_id_table[43], + &dib0700_usb_id_table[53], NULL}, + { NULL }, + }, + { "Sony PlayTV", + { &dib0700_usb_id_table[44], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach0, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7070pd_frontend_attach1, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = sizeof(struct dib0700_adapter_state), + } + }, + + .num_device_descs = 1, + .devices = { + { "Elgato EyeTV Diversity", + { &dib0700_usb_id_table[68], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_NEC_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7700ph_frontend_attach, + .tuner_attach = stk7700ph_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 9, + .devices = { + { "Terratec Cinergy HT USB XE", + { &dib0700_usb_id_table[27], NULL }, + { NULL }, + }, + { "Pinnacle Expresscard 320cx", + { &dib0700_usb_id_table[28], NULL }, + { NULL }, + }, + { "Terratec Cinergy HT Express", + { &dib0700_usb_id_table[32], NULL }, + { NULL }, + }, + { "Gigabyte U8000-RH", + { &dib0700_usb_id_table[37], NULL }, + { NULL }, + }, + { "YUAN High-Tech STK7700PH", + { &dib0700_usb_id_table[38], NULL }, + { NULL }, + }, + { "Asus My Cinema-U3000Hybrid", + { &dib0700_usb_id_table[39], NULL }, + { NULL }, + }, + { "YUAN High-Tech MC770", + { &dib0700_usb_id_table[48], NULL }, + { NULL }, + }, + { "Leadtek WinFast DTV Dongle H", + { &dib0700_usb_id_table[51], NULL }, + { NULL }, + }, + { "YUAN High-Tech STK7700D", + { &dib0700_usb_id_table[54], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = s5h1411_frontend_attach, + .tuner_attach = xc5000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Pinnacle PCTV HD Pro USB Stick", + { &dib0700_usb_id_table[40], NULL }, + { NULL }, + }, + { "Pinnacle PCTV HD USB Stick", + { &dib0700_usb_id_table[41], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = lgdt3305_frontend_attach, + .tuner_attach = mxl5007t_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Hauppauge ATSC MiniCard (B200)", + { &dib0700_usb_id_table[46], NULL }, + { NULL }, + }, + { "Hauppauge ATSC MiniCard (B210)", + { &dib0700_usb_id_table[47], NULL }, + { NULL }, + }, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = stk7770p_frontend_attach, + .tuner_attach = dib7770p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 4, + .devices = { + { "DiBcom STK7770P reference design", + { &dib0700_usb_id_table[59], NULL }, + { NULL }, + }, + { "Terratec Cinergy T USB XXS (HD)/ T3", + { &dib0700_usb_id_table[33], + &dib0700_usb_id_table[52], + &dib0700_usb_id_table[60], NULL}, + { NULL }, + }, + { "TechniSat AirStar TeleStick 2", + { &dib0700_usb_id_table[74], NULL }, + { NULL }, + }, + { "Medion CTX1921 DVB-T USB", + { &dib0700_usb_id_table[75], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk807x_frontend_attach, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 3, + .devices = { + { "DiBcom STK807xP reference design", + { &dib0700_usb_id_table[62], NULL }, + { NULL }, + }, + { "Prolink Pixelview SBTVD", + { &dib0700_usb_id_table[63], NULL }, + { NULL }, + }, + { "EvolutePC TVWay+", + { &dib0700_usb_id_table[64], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_NEC_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk807xpvr_frontend_attach0, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk807xpvr_frontend_attach1, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK807xPVR reference design", + { &dib0700_usb_id_table[61], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = stk809x_frontend_attach, + .tuner_attach = dib809x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK8096GP reference design", + { &dib0700_usb_id_table[67], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = dib90x0_pid_filter, + .pid_filter_ctrl = dib90x0_pid_filter_ctrl, + .frontend_attach = stk9090m_frontend_attach, + .tuner_attach = dib9090_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK9090M reference design", + { &dib0700_usb_id_table[69], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = nim8096md_frontend_attach, + .tuner_attach = nim8096md_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom NIM8096MD reference design", + { &dib0700_usb_id_table[70], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = dib90x0_pid_filter, + .pid_filter_ctrl = dib90x0_pid_filter_ctrl, + .frontend_attach = nim9090md_frontend_attach, + .tuner_attach = nim9090md_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom NIM9090MD reference design", + { &dib0700_usb_id_table[71], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = nim7090_frontend_attach, + .tuner_attach = nim7090_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom NIM7090 reference design", + { &dib0700_usb_id_table[72], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 2, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = tfe7090pvr_frontend0_attach, + .tuner_attach = tfe7090pvr_tuner0_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = tfe7090pvr_frontend1_attach, + .tuner_attach = tfe7090pvr_tuner1_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom TFE7090PVR reference design", + { &dib0700_usb_id_table[73], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = pctv340e_frontend_attach, + .tuner_attach = xc4000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + }}, + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "Pinnacle PCTV 340e HD Pro USB Stick", + { &dib0700_usb_id_table[76], NULL }, + { NULL }, + }, + { "Pinnacle PCTV Hybrid Stick Solo", + { &dib0700_usb_id_table[77], NULL }, + { NULL }, + }, + }, + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = tfe7090e_frontend_attach, + .tuner_attach = tfe7090e_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + } }, + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom TFE7090E reference design", + { &dib0700_usb_id_table[78], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk70x0p_pid_filter, + .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, + .frontend_attach = tfe7790e_frontend_attach, + .tuner_attach = tfe7790e_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + } }, + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom TFE7790E reference design", + { &dib0700_usb_id_table[79], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = stk80xx_pid_filter, + .pid_filter_ctrl = stk80xx_pid_filter_ctrl, + .frontend_attach = tfe8096p_frontend_attach, + .tuner_attach = tfe8096p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + } }, + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom TFE8096P reference design", + { &dib0700_usb_id_table[80], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .module_name = "dib0700", + .rc_query = dib0700_rc_query_old_firmware, + .allowed_protos = RC_TYPE_RC5 | + RC_TYPE_RC6 | + RC_TYPE_NEC, + .change_protocol = dib0700_change_protocol, + }, + }, +}; + +int dib0700_device_count = ARRAY_SIZE(dib0700_devices); diff --git a/drivers/media/usb/dvb-usb/dib07x0.h b/drivers/media/usb/dvb-usb/dib07x0.h new file mode 100644 index 000000000000..7e62c1018520 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dib07x0.h @@ -0,0 +1,21 @@ +#ifndef _DIB07X0_H_ +#define _DIB07X0_H_ + +enum dib07x0_gpios { + GPIO0 = 0, + GPIO1 = 2, + GPIO2 = 3, + GPIO3 = 4, + GPIO4 = 5, + GPIO5 = 6, + GPIO6 = 8, + GPIO7 = 10, + GPIO8 = 11, + GPIO9 = 14, + GPIO10 = 15, +}; + +#define GPIO_IN 0 +#define GPIO_OUT 1 + +#endif diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c new file mode 100644 index 000000000000..a76bbb29ca36 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dibusb-common.c @@ -0,0 +1,479 @@ +/* Common methods for dibusb-based-receivers. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (|-able))." DVB_USB_DEBUG_STATUS); +MODULE_LICENSE("GPL"); + +#define deb_info(args...) dprintk(debug,0x01,args) + +/* common stuff used by the different dibusb modules */ +int dibusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + if (adap->priv != NULL) { + struct dibusb_state *st = adap->priv; + if (st->ops.fifo_ctrl != NULL) + if (st->ops.fifo_ctrl(adap->fe_adap[0].fe, onoff)) { + err("error while controlling the fifo of the demod."); + return -ENODEV; + } + } + return 0; +} +EXPORT_SYMBOL(dibusb_streaming_ctrl); + +int dibusb_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) +{ + if (adap->priv != NULL) { + struct dibusb_state *st = adap->priv; + if (st->ops.pid_ctrl != NULL) + st->ops.pid_ctrl(adap->fe_adap[0].fe, + index, pid, onoff); + } + return 0; +} +EXPORT_SYMBOL(dibusb_pid_filter); + +int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + if (adap->priv != NULL) { + struct dibusb_state *st = adap->priv; + if (st->ops.pid_parse != NULL) + if (st->ops.pid_parse(adap->fe_adap[0].fe, onoff) < 0) + err("could not handle pid_parser"); + } + return 0; +} +EXPORT_SYMBOL(dibusb_pid_filter_ctrl); + +int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b[3]; + int ret; + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; + b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP; + ret = dvb_usb_generic_write(d,b,3); + msleep(10); + return ret; +} +EXPORT_SYMBOL(dibusb_power_ctrl); + +int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 b[3] = { 0 }; + int ret; + + if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0) + return ret; + + if (onoff) { + b[0] = DIBUSB_REQ_SET_STREAMING_MODE; + b[1] = 0x00; + if ((ret = dvb_usb_generic_write(adap->dev,b,2)) < 0) + return ret; + } + + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; + return dvb_usb_generic_write(adap->dev,b,3); +} +EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); + +int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (onoff) { + u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP }; + return dvb_usb_generic_write(d,b,3); + } else + return 0; +} +EXPORT_SYMBOL(dibusb2_0_power_ctrl); + +static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ + /* write only ? */ + int wo = (rbuf == NULL || rlen == 0), + len = 2 + wlen + (wo ? 0 : 2); + + sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; + sndbuf[1] = (addr << 1) | (wo ? 0 : 1); + + memcpy(&sndbuf[2],wbuf,wlen); + + if (!wo) { + sndbuf[wlen+2] = (rlen >> 8) & 0xff; + sndbuf[wlen+3] = rlen & 0xff; + } + + return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0); +} + +/* + * I2C master xfer function + */ +static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i].flags & I2C_M_RD) == 0 + && (msg[i+1].flags & I2C_M_RD)) { + if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len, + msg[i+1].buf,msg[i+1].len) < 0) + break; + i++; + } else if ((msg[i].flags & I2C_M_RD) == 0) { + if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0) + break; + } else if (msg[i].addr != 0x50) { + /* 0x50 is the address of the eeprom - we need to protect it + * from dibusb's bad i2c implementation: reads without + * writing the offset before are forbidden */ + if (dibusb_i2c_msg(d, msg[i].addr, NULL, 0, msg[i].buf, msg[i].len) < 0) + break; + } + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 dibusb_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +struct i2c_algorithm dibusb_i2c_algo = { + .master_xfer = dibusb_i2c_xfer, + .functionality = dibusb_i2c_func, +}; +EXPORT_SYMBOL(dibusb_i2c_algo); + +int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val) +{ + u8 wbuf[1] = { offs }; + return dibusb_i2c_msg(d, 0x50, wbuf, 1, val, 1); +} +EXPORT_SYMBOL(dibusb_read_eeprom_byte); + +/* 3000MC/P stuff */ +// Config Adjacent channels Perf -cal22 +static struct dibx000_agc_config dib3000p_mt2060_agc_config = { + .band_caps = BAND_VHF | BAND_UHF, + .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0), + + .agc1_max = 48497, + .agc1_min = 23593, + .agc2_max = 46531, + .agc2_min = 24904, + + .agc1_pt1 = 0x65, + .agc1_pt2 = 0x69, + + .agc1_slope1 = 0x51, + .agc1_slope2 = 0x27, + + .agc2_pt1 = 0, + .agc2_pt2 = 0x33, + + .agc2_slope1 = 0x35, + .agc2_slope2 = 0x37, +}; + +static struct dib3000mc_config stk3000p_dib3000p_config = { + &dib3000p_mt2060_agc_config, + + .max_time = 0x196, + .ln_adc_level = 0x1cc7, + + .output_mpeg2_in_188_bytes = 1, + + .agc_command1 = 1, + .agc_command2 = 1, +}; + +static struct dibx000_agc_config dib3000p_panasonic_agc_config = { + .band_caps = BAND_VHF | BAND_UHF, + .setup = (1 << 8) | (5 << 5) | (1 << 4) | (1 << 3) | (0 << 2) | (2 << 0), + + .agc1_max = 56361, + .agc1_min = 22282, + .agc2_max = 47841, + .agc2_min = 36045, + + .agc1_pt1 = 0x3b, + .agc1_pt2 = 0x6b, + + .agc1_slope1 = 0x55, + .agc1_slope2 = 0x1d, + + .agc2_pt1 = 0, + .agc2_pt2 = 0x0a, + + .agc2_slope1 = 0x95, + .agc2_slope2 = 0x1e, +}; + +#if defined(CONFIG_DVB_DIB3000MC) || \ + (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE)) + +static struct dib3000mc_config mod3000p_dib3000p_config = { + &dib3000p_panasonic_agc_config, + + .max_time = 0x51, + .ln_adc_level = 0x1cc7, + + .output_mpeg2_in_188_bytes = 1, + + .agc_command1 = 1, + .agc_command2 = 1, +}; + +int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (adap->dev->udev->descriptor.idVendor == USB_VID_LITEON && + adap->dev->udev->descriptor.idProduct == + USB_PID_LITEON_DVB_T_WARM) { + msleep(1000); + } + + adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, + &adap->dev->i2c_adap, + DEFAULT_DIB3000P_I2C_ADDRESS, + &mod3000p_dib3000p_config); + if ((adap->fe_adap[0].fe) == NULL) + adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, + &adap->dev->i2c_adap, + DEFAULT_DIB3000MC_I2C_ADDRESS, + &mod3000p_dib3000p_config); + if ((adap->fe_adap[0].fe) != NULL) { + if (adap->priv != NULL) { + struct dibusb_state *st = adap->priv; + st->ops.pid_parse = dib3000mc_pid_parse; + st->ops.pid_ctrl = dib3000mc_pid_control; + } + return 0; + } + return -ENODEV; +} +EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach); + +static struct mt2060_config stk3000p_mt2060_config = { + 0x60 +}; + +int dibusb_dib3000mc_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dibusb_state *st = adap->priv; + u8 a,b; + u16 if1 = 1220; + struct i2c_adapter *tun_i2c; + + // First IF calibration for Liteon Sticks + if (adap->dev->udev->descriptor.idVendor == USB_VID_LITEON && + adap->dev->udev->descriptor.idProduct == USB_PID_LITEON_DVB_T_WARM) { + + dibusb_read_eeprom_byte(adap->dev,0x7E,&a); + dibusb_read_eeprom_byte(adap->dev,0x7F,&b); + + if (a == 0x00) + if1 += b; + else if (a == 0x80) + if1 -= b; + else + warn("LITE-ON DVB-T: Strange IF1 calibration :%2X %2X\n", a, b); + + } else if (adap->dev->udev->descriptor.idVendor == USB_VID_DIBCOM && + adap->dev->udev->descriptor.idProduct == USB_PID_DIBCOM_MOD3001_WARM) { + u8 desc; + dibusb_read_eeprom_byte(adap->dev, 7, &desc); + if (desc == 2) { + a = 127; + do { + dibusb_read_eeprom_byte(adap->dev, a, &desc); + a--; + } while (a > 7 && (desc == 0xff || desc == 0x00)); + if (desc & 0x80) + if1 -= (0xff - desc); + else + if1 += desc; + } + } + + tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1); + if (dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk3000p_mt2060_config, if1) == NULL) { + /* not found - use panasonic pll parameters */ + if (dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, tun_i2c, DVB_PLL_ENV57H1XD5) == NULL) + return -ENOMEM; + } else { + st->mt2060_present = 1; + /* set the correct parameters for the dib3000p */ + dib3000mc_set_config(adap->fe_adap[0].fe, &stk3000p_dib3000p_config); + } + return 0; +} +EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach); +#endif + +/* + * common remote control stuff + */ +struct rc_map_table rc_map_dibusb_table[] = { + /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */ + { 0x0016, KEY_POWER }, + { 0x0010, KEY_MUTE }, + { 0x0003, KEY_1 }, + { 0x0001, KEY_2 }, + { 0x0006, KEY_3 }, + { 0x0009, KEY_4 }, + { 0x001d, KEY_5 }, + { 0x001f, KEY_6 }, + { 0x000d, KEY_7 }, + { 0x0019, KEY_8 }, + { 0x001b, KEY_9 }, + { 0x0015, KEY_0 }, + { 0x0005, KEY_CHANNELUP }, + { 0x0002, KEY_CHANNELDOWN }, + { 0x001e, KEY_VOLUMEUP }, + { 0x000a, KEY_VOLUMEDOWN }, + { 0x0011, KEY_RECORD }, + { 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */ + { 0x0014, KEY_PLAY }, + { 0x001a, KEY_STOP }, + { 0x0040, KEY_REWIND }, + { 0x0012, KEY_FASTFORWARD }, + { 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */ + { 0x004c, KEY_PAUSE }, + { 0x004d, KEY_SCREEN }, /* Full screen mode. */ + { 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ + /* additional keys TwinHan VisionPlus, the Artec seemingly not have */ + { 0x000c, KEY_CANCEL }, /* Cancel */ + { 0x001c, KEY_EPG }, /* EPG */ + { 0x0000, KEY_TAB }, /* Tab */ + { 0x0048, KEY_INFO }, /* Preview */ + { 0x0004, KEY_LIST }, /* RecordList */ + { 0x000f, KEY_TEXT }, /* Teletext */ + /* Key codes for the KWorld/ADSTech/JetWay remote. */ + { 0x8612, KEY_POWER }, + { 0x860f, KEY_SELECT }, /* source */ + { 0x860c, KEY_UNKNOWN }, /* scan */ + { 0x860b, KEY_EPG }, + { 0x8610, KEY_MUTE }, + { 0x8601, KEY_1 }, + { 0x8602, KEY_2 }, + { 0x8603, KEY_3 }, + { 0x8604, KEY_4 }, + { 0x8605, KEY_5 }, + { 0x8606, KEY_6 }, + { 0x8607, KEY_7 }, + { 0x8608, KEY_8 }, + { 0x8609, KEY_9 }, + { 0x860a, KEY_0 }, + { 0x8618, KEY_ZOOM }, + { 0x861c, KEY_UNKNOWN }, /* preview */ + { 0x8613, KEY_UNKNOWN }, /* snap */ + { 0x8600, KEY_UNDO }, + { 0x861d, KEY_RECORD }, + { 0x860d, KEY_STOP }, + { 0x860e, KEY_PAUSE }, + { 0x8616, KEY_PLAY }, + { 0x8611, KEY_BACK }, + { 0x8619, KEY_FORWARD }, + { 0x8614, KEY_UNKNOWN }, /* pip */ + { 0x8615, KEY_ESC }, + { 0x861a, KEY_UP }, + { 0x861e, KEY_DOWN }, + { 0x861f, KEY_LEFT }, + { 0x861b, KEY_RIGHT }, + + /* Key codes for the DiBcom MOD3000 remote. */ + { 0x8000, KEY_MUTE }, + { 0x8001, KEY_TEXT }, + { 0x8002, KEY_HOME }, + { 0x8003, KEY_POWER }, + + { 0x8004, KEY_RED }, + { 0x8005, KEY_GREEN }, + { 0x8006, KEY_YELLOW }, + { 0x8007, KEY_BLUE }, + + { 0x8008, KEY_DVD }, + { 0x8009, KEY_AUDIO }, + { 0x800a, KEY_IMAGES }, /* Pictures */ + { 0x800b, KEY_VIDEO }, + + { 0x800c, KEY_BACK }, + { 0x800d, KEY_UP }, + { 0x800e, KEY_RADIO }, + { 0x800f, KEY_EPG }, + + { 0x8010, KEY_LEFT }, + { 0x8011, KEY_OK }, + { 0x8012, KEY_RIGHT }, + { 0x8013, KEY_UNKNOWN }, /* SAP */ + + { 0x8014, KEY_TV }, + { 0x8015, KEY_DOWN }, + { 0x8016, KEY_MENU }, /* DVD Menu */ + { 0x8017, KEY_LAST }, + + { 0x8018, KEY_RECORD }, + { 0x8019, KEY_STOP }, + { 0x801a, KEY_PAUSE }, + { 0x801b, KEY_PLAY }, + + { 0x801c, KEY_PREVIOUS }, + { 0x801d, KEY_REWIND }, + { 0x801e, KEY_FASTFORWARD }, + { 0x801f, KEY_NEXT}, + + { 0x8040, KEY_1 }, + { 0x8041, KEY_2 }, + { 0x8042, KEY_3 }, + { 0x8043, KEY_CHANNELUP }, + + { 0x8044, KEY_4 }, + { 0x8045, KEY_5 }, + { 0x8046, KEY_6 }, + { 0x8047, KEY_CHANNELDOWN }, + + { 0x8048, KEY_7 }, + { 0x8049, KEY_8 }, + { 0x804a, KEY_9 }, + { 0x804b, KEY_VOLUMEUP }, + + { 0x804c, KEY_CLEAR }, + { 0x804d, KEY_0 }, + { 0x804e, KEY_ENTER }, + { 0x804f, KEY_VOLUMEDOWN }, +}; +EXPORT_SYMBOL(rc_map_dibusb_table); + +int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE; + dvb_usb_generic_rw(d,&cmd,1,key,5,0); + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} +EXPORT_SYMBOL(dibusb_rc_query); diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c new file mode 100644 index 000000000000..a4ac37e0e98b --- /dev/null +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c @@ -0,0 +1,471 @@ +/* DVB USB compliant linux driver for mobile DVB-T USB devices based on + * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DiBcom, which has + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int dib3000mb_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dibusb_state *st = adap->priv; + + return st->ops.tuner_pass_ctrl(fe, enable, st->tuner_addr); +} + +static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib3000_config demod_cfg; + struct dibusb_state *st = adap->priv; + + demod_cfg.demod_address = 0x8; + + adap->fe_adap[0].fe = dvb_attach(dib3000mb_attach, &demod_cfg, + &adap->dev->i2c_adap, &st->ops); + if ((adap->fe_adap[0].fe) == NULL) + return -ENODEV; + + adap->fe_adap[0].fe->ops.i2c_gate_ctrl = dib3000mb_i2c_gate_ctrl; + + return 0; +} + +static int dibusb_thomson_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dibusb_state *st = adap->priv; + + st->tuner_addr = 0x61; + + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, + DVB_PLL_TUA6010XS); + return 0; +} + +static int dibusb_panasonic_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dibusb_state *st = adap->priv; + + st->tuner_addr = 0x60; + + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, + DVB_PLL_TDA665X); + return 0; +} + +/* Some of the Artec 1.1 device aren't equipped with the default tuner + * (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures + * this out. */ +static int dibusb_tuner_probe_and_attach(struct dvb_usb_adapter *adap) +{ + u8 b[2] = { 0,0 }, b2[1]; + int ret = 0; + struct i2c_msg msg[2] = { + { .flags = 0, .buf = b, .len = 2 }, + { .flags = I2C_M_RD, .buf = b2, .len = 1 }, + }; + struct dibusb_state *st = adap->priv; + + /* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */ + msg[0].addr = msg[1].addr = st->tuner_addr = 0x60; + + if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) + adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 1); + + if (i2c_transfer(&adap->dev->i2c_adap, msg, 2) != 2) { + err("tuner i2c write failed."); + ret = -EREMOTEIO; + } + + if (adap->fe_adap[0].fe->ops.i2c_gate_ctrl) + adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, 0); + + if (b2[0] == 0xfe) { + info("This device has the Thomson Cable onboard. Which is default."); + ret = dibusb_thomson_tuner_attach(adap); + } else { + info("This device has the Panasonic ENV77H11D5 onboard."); + ret = dibusb_panasonic_tuner_attach(adap); + } + + return ret; +} + +/* USB Driver stuff */ +static struct dvb_usb_device_properties dibusb1_1_properties; +static struct dvb_usb_device_properties dibusb1_1_an2235_properties; +static struct dvb_usb_device_properties dibusb2_0b_properties; +static struct dvb_usb_device_properties artec_t1_usb2_properties; + +static int dibusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (0 == dvb_usb_device_init(intf, &dibusb1_1_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb1_1_an2235_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dibusb2_0b_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &artec_t1_usb2_properties, + THIS_MODULE, NULL, adapter_nr)) + return 0; + + return -EINVAL; +} + +/* do not change the order of the ID table */ +static struct usb_device_id dibusb_dib3000mb_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_WARM) }, +/* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, +/* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, +/* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, +/* 05 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, +/* 06 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, +/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, +/* 08 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, +/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, +/* 10 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, +/* 11 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, +/* 12 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, +/* 13 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, +/* 14 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, +/* 15 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_COLD) }, +/* 16 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_WARM) }, +/* 17 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, +/* 18 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, +/* 19 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, +/* 20 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, +/* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, +/* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, +/* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, + +/* device ID with default DIBUSB2_0-firmware and with the hacked firmware */ +/* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, +/* 25 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_COLD) }, +/* 26 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_WARM) }, + +/* 27 */ { USB_DEVICE(USB_VID_KWORLD, USB_PID_KWORLD_VSTREAM_COLD) }, + +/* 28 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, +/* 29 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, + +/* + * XXX: As Artec just 'forgot' to program the EEPROM on some Artec T1 devices + * we don't catch these faulty IDs (namely 'Cypress FX1 USB controller') that + * have been left on the device. If you don't have such a device but an Artec + * device that's supposed to work with this driver but is not detected by it, + * free to enable CONFIG_DVB_USB_DIBUSB_MB_FAULTY via your kernel config. + */ + +#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY +/* 30 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, +#endif + + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table); + +static struct dvb_usb_device_properties dibusb1_1_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_AN2135, + + .firmware = "dvb-usb-dibusb-5.0.0.11.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 16, + + .streaming_ctrl = dibusb_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_tuner_probe_and_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + } + }, + + .power_ctrl = dibusb_power_ctrl, + + .rc.legacy = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_map_table = rc_map_dibusb_table, + .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + }, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 9, + .devices = { + { "AVerMedia AverTV DVBT USB1.1", + { &dibusb_dib3000mb_table[0], NULL }, + { &dibusb_dib3000mb_table[1], NULL }, + }, + { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", + { &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL}, + { &dibusb_dib3000mb_table[3], NULL }, + }, + { "DiBcom USB1.1 DVB-T reference design (MOD3000)", + { &dibusb_dib3000mb_table[5], NULL }, + { &dibusb_dib3000mb_table[6], NULL }, + }, + { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", + { &dibusb_dib3000mb_table[7], NULL }, + { &dibusb_dib3000mb_table[8], NULL }, + }, + { "Grandtec USB1.1 DVB-T", + { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, + { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, + }, + { "Unknown USB1.1 DVB-T device ???? please report the name to the author", + { &dibusb_dib3000mb_table[13], NULL }, + { &dibusb_dib3000mb_table[14], NULL }, + }, + { "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device", + { &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL}, + { &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL}, + }, + { "Artec T1 USB1.1 TVBOX with AN2135", + { &dibusb_dib3000mb_table[19], NULL }, + { &dibusb_dib3000mb_table[20], NULL }, + }, + { "VideoWalker DVB-T USB", + { &dibusb_dib3000mb_table[25], NULL }, + { &dibusb_dib3000mb_table[26], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties dibusb1_1_an2235_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_AN2235, + + .firmware = "dvb-usb-dibusb-an2235-01.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER, + .pid_filter_count = 16, + + .streaming_ctrl = dibusb_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_tuner_probe_and_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + }, + }, + .power_ctrl = dibusb_power_ctrl, + + .rc.legacy = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_map_table = rc_map_dibusb_table, + .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + }, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + +#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY + .num_device_descs = 2, +#else + .num_device_descs = 1, +#endif + .devices = { + { "Artec T1 USB1.1 TVBOX with AN2235", + { &dibusb_dib3000mb_table[21], NULL }, + { &dibusb_dib3000mb_table[22], NULL }, + }, +#ifdef CONFIG_DVB_USB_DIBUSB_MB_FAULTY + { "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)", + { &dibusb_dib3000mb_table[30], NULL }, + { NULL }, + }, + { NULL }, +#endif + } +}; + +static struct dvb_usb_device_properties dibusb2_0b_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .firmware = "dvb-usb-adstech-usb2-02.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 16, + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_thomson_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + } + }, + .power_ctrl = dibusb2_0_power_ctrl, + + .rc.legacy = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_map_table = rc_map_dibusb_table, + .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + }, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 2, + .devices = { + { "KWorld/ADSTech Instant DVB-T USB2.0", + { &dibusb_dib3000mb_table[23], NULL }, + { &dibusb_dib3000mb_table[24], NULL }, + }, + { "KWorld Xpert DVB-T USB2.0", + { &dibusb_dib3000mb_table[27], NULL }, + { NULL } + }, + { NULL }, + } +}; + +static struct dvb_usb_device_properties artec_t1_usb2_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .firmware = "dvb-usb-dibusb-6.0.0.8.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 16, + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_tuner_probe_and_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + } + }, + .power_ctrl = dibusb2_0_power_ctrl, + + .rc.legacy = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_map_table = rc_map_dibusb_table, + .rc_map_size = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + }, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Artec T1 USB2.0", + { &dibusb_dib3000mb_table[28], NULL }, + { &dibusb_dib3000mb_table[29], NULL }, + }, + { NULL }, + } +}; + +static struct usb_driver dibusb_driver = { + .name = "dvb_usb_dibusb_mb", + .probe = dibusb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dibusb_dib3000mb_table, +}; + +module_usb_driver(dibusb_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c new file mode 100644 index 000000000000..9d1a59d09c52 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dibusb-mc.c @@ -0,0 +1,149 @@ +/* DVB USB compliant linux driver for mobile DVB-T USB devices based on + * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-C/P) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DiBcom, which has + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* USB Driver stuff */ +static struct dvb_usb_device_properties dibusb_mc_properties; + +static int dibusb_mc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &dibusb_mc_properties, THIS_MODULE, + NULL, adapter_nr); +} + +/* do not change the order of the ID table */ +static struct usb_device_id dibusb_dib3000mc_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) }, +/* 02 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, +/* 03 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_WARM) }, // ( ? ) +/* 04 */ { USB_DEVICE(USB_VID_LITEON, USB_PID_LITEON_DVB_T_COLD) }, +/* 05 */ { USB_DEVICE(USB_VID_LITEON, USB_PID_LITEON_DVB_T_WARM) }, +/* 06 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_DIGIVOX_MINI_SL_COLD) }, +/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_DIGIVOX_MINI_SL_WARM) }, +/* 08 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB2_COLD) }, +/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB2_WARM) }, +/* 10 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14_COLD) }, +/* 11 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14_WARM) }, +/* 12 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_COLD) }, +/* 13 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_WARM) }, +/* 14 */ { USB_DEVICE(USB_VID_HUMAX_COEX, USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD) }, +/* 15 */ { USB_DEVICE(USB_VID_HUMAX_COEX, USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table); + +static struct dvb_usb_device_properties dibusb_mc_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-dibusb-6.0.0.8.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + } + }, + .power_ctrl = dibusb2_0_power_ctrl, + + .rc.legacy = { + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_map_table = rc_map_dibusb_table, + .rc_map_size = 111, /* FIXME */ + .rc_query = dibusb_rc_query, + }, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 8, + .devices = { + { "DiBcom USB2.0 DVB-T reference design (MOD3000P)", + { &dibusb_dib3000mc_table[0], NULL }, + { &dibusb_dib3000mc_table[1], NULL }, + }, + { "Artec T1 USB2.0 TVBOX (please check the warm ID)", + { &dibusb_dib3000mc_table[2], NULL }, + { &dibusb_dib3000mc_table[3], NULL }, + }, + { "LITE-ON USB2.0 DVB-T Tuner", + /* Also rebranded as Intuix S800, Toshiba */ + { &dibusb_dib3000mc_table[4], NULL }, + { &dibusb_dib3000mc_table[5], NULL }, + }, + { "MSI Digivox Mini SL", + { &dibusb_dib3000mc_table[6], NULL }, + { &dibusb_dib3000mc_table[7], NULL }, + }, + { "GRAND - USB2.0 DVB-T adapter", + { &dibusb_dib3000mc_table[8], NULL }, + { &dibusb_dib3000mc_table[9], NULL }, + }, + { "Artec T14 - USB2.0 DVB-T", + { &dibusb_dib3000mc_table[10], NULL }, + { &dibusb_dib3000mc_table[11], NULL }, + }, + { "Leadtek - USB2.0 Winfast DTV dongle", + { &dibusb_dib3000mc_table[12], NULL }, + { &dibusb_dib3000mc_table[13], NULL }, + }, + { "Humax/Coex DVB-T USB Stick 2.0 High Speed", + { &dibusb_dib3000mc_table[14], NULL }, + { &dibusb_dib3000mc_table[15], NULL }, + }, + { NULL }, + } +}; + +static struct usb_driver dibusb_mc_driver = { + .name = "dvb_usb_dibusb_mc", + .probe = dibusb_mc_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dibusb_dib3000mc_table, +}; + +module_usb_driver(dibusb_mc_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for DiBcom USB2.0 DVB-T (DiB3000M-C/P based) devices"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h new file mode 100644 index 000000000000..e47c321b3ffc --- /dev/null +++ b/drivers/media/usb/dvb-usb/dibusb.h @@ -0,0 +1,131 @@ +/* Header file for all dibusb-based-receivers. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_DIBUSB_H_ +#define _DVB_USB_DIBUSB_H_ + +#ifndef DVB_USB_LOG_PREFIX + #define DVB_USB_LOG_PREFIX "dibusb" +#endif +#include "dvb-usb.h" + +#include "dib3000.h" +#include "dib3000mc.h" +#include "mt2060.h" + +/* + * protocol of all dibusb related devices + */ + +/* + * bulk msg to/from endpoint 0x01 + * + * general structure: + * request_byte parameter_bytes + */ + +#define DIBUSB_REQ_START_READ 0x00 +#define DIBUSB_REQ_START_DEMOD 0x01 + +/* + * i2c read + * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word + * bulk read: byte_buffer (length_word bytes) + */ +#define DIBUSB_REQ_I2C_READ 0x02 + +/* + * i2c write + * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes + */ +#define DIBUSB_REQ_I2C_WRITE 0x03 + +/* + * polling the value of the remote control + * bulk write: 0x04 + * bulk read: byte_buffer (5 bytes) + */ +#define DIBUSB_REQ_POLL_REMOTE 0x04 + +/* additional status values for Hauppauge Remote Control Protocol */ +#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01 +#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03 + +/* streaming mode: + * bulk write: 0x05 mode_byte + * + * mode_byte is mostly 0x00 + */ +#define DIBUSB_REQ_SET_STREAMING_MODE 0x05 + +/* interrupt the internal read loop, when blocking */ +#define DIBUSB_REQ_INTR_READ 0x06 + +/* io control + * 0x07 cmd_byte param_bytes + * + * param_bytes can be up to 32 bytes + * + * cmd_byte function parameter name + * 0x00 power mode + * 0x00 sleep + * 0x01 wakeup + * + * 0x01 enable streaming + * 0x02 disable streaming + * + * + */ +#define DIBUSB_REQ_SET_IOCTL 0x07 + +/* IOCTL commands */ + +/* change the power mode in firmware */ +#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00 +#define DIBUSB_IOCTL_POWER_SLEEP 0x00 +#define DIBUSB_IOCTL_POWER_WAKEUP 0x01 + +/* modify streaming of the FX2 */ +#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 +#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 + +struct dibusb_state { + struct dib_fe_xfer_ops ops; + int mt2060_present; + u8 tuner_addr; +}; + +struct dibusb_device_state { + /* for RC5 remote control */ + int old_toggle; + int last_repeat_count; +}; + +extern struct i2c_algorithm dibusb_i2c_algo; + +extern int dibusb_dib3000mc_frontend_attach(struct dvb_usb_adapter *); +extern int dibusb_dib3000mc_tuner_attach (struct dvb_usb_adapter *); + +extern int dibusb_streaming_ctrl(struct dvb_usb_adapter *, int); +extern int dibusb_pid_filter(struct dvb_usb_adapter *, int, u16, int); +extern int dibusb_pid_filter_ctrl(struct dvb_usb_adapter *, int); +extern int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *, int); + +extern int dibusb_power_ctrl(struct dvb_usb_device *, int); +extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int); + +#define DEFAULT_RC_INTERVAL 150 +//#define DEFAULT_RC_INTERVAL 100000 + +extern struct rc_map_table rc_map_dibusb_table[]; +extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *); +extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *); + +#endif diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c new file mode 100644 index 000000000000..ff34419a4c88 --- /dev/null +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -0,0 +1,354 @@ +/* DVB USB compliant linux driver for Nebula Electronics uDigiTV DVB-T USB2.0 + * receiver + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) + * + * partly based on the SDK published by Nebula Electronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "digitv.h" + +#include "mt352.h" +#include "nxt6000.h" + +/* debug */ +static int dvb_usb_digitv_debug; +module_param_named(debug,dvb_usb_digitv_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define deb_rc(args...) dprintk(dvb_usb_digitv_debug,0x01,args) + +static int digitv_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 sndbuf[7],rcvbuf[7]; + memset(sndbuf,0,7); memset(rcvbuf,0,7); + + sndbuf[0] = cmd; + sndbuf[1] = vv; + sndbuf[2] = wo ? wlen : rlen; + + if (wo) { + memcpy(&sndbuf[3],wbuf,wlen); + dvb_usb_generic_write(d,sndbuf,7); + } else { + dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10); + memcpy(rbuf,&rcvbuf[3],rlen); + } + return 0; +} + +/* I2C */ +static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0, + msg[i+1].buf,msg[i+1].len) < 0) + break; + i++; + } else + if (digitv_ctrl_msg(d,USB_WRITE_COFDM, msg[i].buf[0], + &msg[i].buf[1],msg[i].len-1,NULL,0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 digitv_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm digitv_i2c_algo = { + .master_xfer = digitv_i2c_xfer, + .functionality = digitv_i2c_func, +}; + +/* Callbacks for DVB USB */ +static int digitv_identify_state (struct usb_device *udev, struct + dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, + int *cold) +{ + *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; + return 0; +} + +static int digitv_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 reset_buf[] = { 0x89, 0x38, 0x8a, 0x2d, 0x50, 0x80 }; + static u8 init_buf[] = { 0x68, 0xa0, 0x8e, 0x40, 0x53, 0x50, + 0x67, 0x20, 0x7d, 0x01, 0x7c, 0x00, 0x7a, 0x00, + 0x79, 0x20, 0x57, 0x05, 0x56, 0x31, 0x88, 0x0f, + 0x75, 0x32 }; + int i; + + for (i = 0; i < ARRAY_SIZE(reset_buf); i += 2) + mt352_write(fe, &reset_buf[i], 2); + + msleep(1); + + for (i = 0; i < ARRAY_SIZE(init_buf); i += 2) + mt352_write(fe, &init_buf[i], 2); + + return 0; +} + +static struct mt352_config digitv_mt352_config = { + .demod_init = digitv_mt352_demod_init, +}; + +static int digitv_nxt6000_tuner_set_params(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + u8 b[5]; + + fe->ops.tuner_ops.calc_regs(fe, b, sizeof(b)); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + return digitv_ctrl_msg(adap->dev, USB_WRITE_TUNER, 0, &b[1], 4, NULL, 0); +} + +static struct nxt6000_config digitv_nxt6000_config = { + .clock_inversion = 1, +}; + +static int digitv_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct digitv_state *st = adap->dev->priv; + + adap->fe_adap[0].fe = dvb_attach(mt352_attach, &digitv_mt352_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) { + st->is_nxt6000 = 0; + return 0; + } + adap->fe_adap[0].fe = dvb_attach(nxt6000_attach, + &digitv_nxt6000_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) != NULL) { + st->is_nxt6000 = 1; + return 0; + } + return -EIO; +} + +static int digitv_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct digitv_state *st = adap->dev->priv; + + if (!dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, NULL, DVB_PLL_TDED4)) + return -ENODEV; + + if (st->is_nxt6000) + adap->fe_adap[0].fe->ops.tuner_ops.set_params = digitv_nxt6000_tuner_set_params; + + return 0; +} + +static struct rc_map_table rc_map_digitv_table[] = { + { 0x5f55, KEY_0 }, + { 0x6f55, KEY_1 }, + { 0x9f55, KEY_2 }, + { 0xaf55, KEY_3 }, + { 0x5f56, KEY_4 }, + { 0x6f56, KEY_5 }, + { 0x9f56, KEY_6 }, + { 0xaf56, KEY_7 }, + { 0x5f59, KEY_8 }, + { 0x6f59, KEY_9 }, + { 0x9f59, KEY_TV }, + { 0xaf59, KEY_AUX }, + { 0x5f5a, KEY_DVD }, + { 0x6f5a, KEY_POWER }, + { 0x9f5a, KEY_CAMERA }, /* labelled 'Picture' */ + { 0xaf5a, KEY_AUDIO }, + { 0x5f65, KEY_INFO }, + { 0x6f65, KEY_F13 }, /* 16:9 */ + { 0x9f65, KEY_F14 }, /* 14:9 */ + { 0xaf65, KEY_EPG }, + { 0x5f66, KEY_EXIT }, + { 0x6f66, KEY_MENU }, + { 0x9f66, KEY_UP }, + { 0xaf66, KEY_DOWN }, + { 0x5f69, KEY_LEFT }, + { 0x6f69, KEY_RIGHT }, + { 0x9f69, KEY_ENTER }, + { 0xaf69, KEY_CHANNELUP }, + { 0x5f6a, KEY_CHANNELDOWN }, + { 0x6f6a, KEY_VOLUMEUP }, + { 0x9f6a, KEY_VOLUMEDOWN }, + { 0xaf6a, KEY_RED }, + { 0x5f95, KEY_GREEN }, + { 0x6f95, KEY_YELLOW }, + { 0x9f95, KEY_BLUE }, + { 0xaf95, KEY_SUBTITLE }, + { 0x5f96, KEY_F15 }, /* AD */ + { 0x6f96, KEY_TEXT }, + { 0x9f96, KEY_MUTE }, + { 0xaf96, KEY_REWIND }, + { 0x5f99, KEY_STOP }, + { 0x6f99, KEY_PLAY }, + { 0x9f99, KEY_FASTFORWARD }, + { 0xaf99, KEY_F16 }, /* chapter */ + { 0x5f9a, KEY_PAUSE }, + { 0x6f9a, KEY_PLAY }, + { 0x9f9a, KEY_RECORD }, + { 0xaf9a, KEY_F17 }, /* picture in picture */ + { 0x5fa5, KEY_KPPLUS }, /* zoom in */ + { 0x6fa5, KEY_KPMINUS }, /* zoom out */ + { 0x9fa5, KEY_F18 }, /* capture */ + { 0xafa5, KEY_F19 }, /* web */ + { 0x5fa6, KEY_EMAIL }, + { 0x6fa6, KEY_PHONE }, + { 0x9fa6, KEY_PC }, +}; + +static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + int i; + u8 key[5]; + u8 b[4] = { 0 }; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4); + + /* Tell the device we've read the remote. Not sure how necessary + this is, but the Nebula SDK does it. */ + digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0); + + /* if something is inside the buffer, simulate key press */ + if (key[1] != 0) + { + for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { + if (rc5_custom(&d->props.rc.legacy.rc_map_table[i]) == key[1] && + rc5_data(&d->props.rc.legacy.rc_map_table[i]) == key[2]) { + *event = d->props.rc.legacy.rc_map_table[i].keycode; + *state = REMOTE_KEY_PRESSED; + return 0; + } + } + } + + if (key[0] != 0) + deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties digitv_properties; + +static int digitv_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + int ret = dvb_usb_device_init(intf, &digitv_properties, THIS_MODULE, &d, + adapter_nr); + if (ret == 0) { + u8 b[4] = { 0 }; + + if (d != NULL) { /* do that only when the firmware is loaded */ + b[0] = 1; + digitv_ctrl_msg(d,USB_WRITE_REMOTE_TYPE,0,b,4,NULL,0); + + b[0] = 0; + digitv_ctrl_msg(d,USB_WRITE_REMOTE,0,b,4,NULL,0); + } + } + return ret; +} + +static struct usb_device_id digitv_table [] = { + { USB_DEVICE(USB_VID_ANCHOR, USB_PID_NEBULA_DIGITV) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, digitv_table); + +static struct dvb_usb_device_properties digitv_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-digitv-02.fw", + + .size_of_priv = sizeof(struct digitv_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = digitv_frontend_attach, + .tuner_attach = digitv_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .identify_state = digitv_identify_state, + + .rc.legacy = { + .rc_interval = 1000, + .rc_map_table = rc_map_digitv_table, + .rc_map_size = ARRAY_SIZE(rc_map_digitv_table), + .rc_query = digitv_rc_query, + }, + + .i2c_algo = &digitv_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Nebula Electronics uDigiTV DVB-T USB2.0)", + { &digitv_table[0], NULL }, + { NULL }, + }, + { NULL }, + } +}; + +static struct usb_driver digitv_driver = { + .name = "dvb_usb_digitv", + .probe = digitv_probe, + .disconnect = dvb_usb_device_exit, + .id_table = digitv_table, +}; + +module_usb_driver(digitv_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Nebula Electronics uDigiTV DVB-T USB2.0"); +MODULE_VERSION("1.0-alpha"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/digitv.h b/drivers/media/usb/dvb-usb/digitv.h new file mode 100644 index 000000000000..908c09f4966b --- /dev/null +++ b/drivers/media/usb/dvb-usb/digitv.h @@ -0,0 +1,66 @@ +#ifndef _DVB_USB_DIGITV_H_ +#define _DVB_USB_DIGITV_H_ + +#define DVB_USB_LOG_PREFIX "digitv" +#include "dvb-usb.h" + +struct digitv_state { + int is_nxt6000; +}; + +/* protocol (from usblogging and the SDK: + * + * Always 7 bytes bulk message(s) for controlling + * + * First byte describes the command. Reads are 2 consecutive transfer (as always). + * + * General structure: + * + * write or first message of a read: + * <cmdbyte> VV <len> B0 B1 B2 B3 + * + * second message of a read + * <cmdbyte> VV <len> R0 R1 R2 R3 + * + * whereas 0 < len <= 4 + * + * I2C address is stored somewhere inside the device. + * + * 0x01 read from EEPROM + * VV = offset; B* = 0; R* = value(s) + * + * 0x02 read register of the COFDM + * VV = register; B* = 0; R* = value(s) + * + * 0x05 write register of the COFDM + * VV = register; B* = value(s); + * + * 0x06 write to the tuner (only for NXT6000) + * VV = 0; B* = PLL data; len = 4; + * + * 0x03 read remote control + * VV = 0; B* = 0; len = 4; R* = key + * + * 0x07 write to the remote (don't know why one should this, resetting ?) + * VV = 0; B* = key; len = 4; + * + * 0x08 write remote type + * VV = 0; B[0] = 0x01, len = 4 + * + * 0x09 write device init + * TODO + */ +#define USB_READ_EEPROM 1 + +#define USB_READ_COFDM 2 +#define USB_WRITE_COFDM 5 + +#define USB_WRITE_TUNER 6 + +#define USB_READ_REMOTE 3 +#define USB_WRITE_REMOTE 7 +#define USB_WRITE_REMOTE_TYPE 8 + +#define USB_DEV_INIT 9 + +#endif diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c new file mode 100644 index 000000000000..3d81daa49172 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -0,0 +1,210 @@ +/* Frontend part of the Linux driver for the WideView/ Yakumo/ Hama/ + * Typhoon/ Yuan DVB-T USB2.0 receiver. + * + * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dtt200u.h" + +struct dtt200u_fe_state { + struct dvb_usb_device *d; + + fe_status_t stat; + + struct dtv_frontend_properties fep; + struct dvb_frontend frontend; +}; + +static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 st = GET_TUNE_STATUS, b[3]; + + dvb_usb_generic_rw(state->d,&st,1,b,3,0); + + switch (b[0]) { + case 0x01: + *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + break; + case 0x00: /* pending */ + *stat = FE_TIMEDOUT; /* during set_frontend */ + break; + default: + case 0x02: /* failed */ + *stat = 0; + break; + } + return 0; +} + +static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_VIT_ERR_CNT,b[3]; + dvb_usb_generic_rw(state->d,&bw,1,b,3,0); + *ber = (b[0] << 16) | (b[1] << 8) | b[2]; + return 0; +} + +static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_RS_UNCOR_BLK_CNT,b[2]; + + dvb_usb_generic_rw(state->d,&bw,1,b,2,0); + *unc = (b[0] << 8) | b[1]; + return 0; +} + +static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_AGC, b; + dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); + *strength = (b << 8) | b; + return 0; +} + +static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_SNR,br; + dvb_usb_generic_rw(state->d,&bw,1,&br,1,0); + *snr = ~((br << 8) | br); + return 0; +} + +static int dtt200u_fe_init(struct dvb_frontend* fe) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 b = SET_INIT; + return dvb_usb_generic_write(state->d,&b,1); +} + +static int dtt200u_fe_sleep(struct dvb_frontend* fe) +{ + return dtt200u_fe_init(fe); +} + +static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1500; + tune->step_size = 0; + tune->max_drift = 0; + return 0; +} + +static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dtt200u_fe_state *state = fe->demodulator_priv; + int i; + fe_status_t st; + u16 freq = fep->frequency / 250000; + u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; + + switch (fep->bandwidth_hz) { + case 8000000: + bwbuf[1] = 8; + break; + case 7000000: + bwbuf[1] = 7; + break; + case 6000000: + bwbuf[1] = 6; + break; + default: + return -EINVAL; + } + + dvb_usb_generic_write(state->d,bwbuf,2); + + freqbuf[1] = freq & 0xff; + freqbuf[2] = (freq >> 8) & 0xff; + dvb_usb_generic_write(state->d,freqbuf,3); + + for (i = 0; i < 30; i++) { + msleep(20); + dtt200u_fe_read_status(fe, &st); + if (st & FE_TIMEDOUT) + continue; + } + + return 0; +} + +static int dtt200u_fe_get_frontend(struct dvb_frontend* fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct dtt200u_fe_state *state = fe->demodulator_priv; + memcpy(fep, &state->fep, sizeof(struct dtv_frontend_properties)); + return 0; +} + +static void dtt200u_fe_release(struct dvb_frontend* fe) +{ + struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops dtt200u_fe_ops; + +struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d) +{ + struct dtt200u_fe_state* state = NULL; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL); + if (state == NULL) + goto error; + + deb_info("attaching frontend dtt200u\n"); + + state->d = d; + + memcpy(&state->frontend.ops,&dtt200u_fe_ops,sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + + return &state->frontend; +error: + return NULL; +} + +static struct dvb_frontend_ops dtt200u_fe_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "WideView USB DVB-T", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 250000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dtt200u_fe_release, + + .init = dtt200u_fe_init, + .sleep = dtt200u_fe_sleep, + + .set_frontend = dtt200u_fe_set_frontend, + .get_frontend = dtt200u_fe_get_frontend, + .get_tune_settings = dtt200u_fe_get_tune_settings, + + .read_status = dtt200u_fe_read_status, + .read_ber = dtt200u_fe_read_ber, + .read_signal_strength = dtt200u_fe_read_signal_strength, + .read_snr = dtt200u_fe_read_snr, + .read_ucblocks = dtt200u_fe_read_unc_blocks, +}; diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c new file mode 100644 index 000000000000..66f205c112b2 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -0,0 +1,368 @@ +/* DVB USB library compliant Linux driver for the WideView/ Yakumo/ Hama/ + * Typhoon/ Yuan/ Miglia DVB-T USB2.0 receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Steve Chang from WideView for providing support for the WT-220U. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dtt200u.h" + +/* debug */ +int dvb_usb_dtt200u_debug; +module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b = SET_INIT; + + if (onoff) + dvb_usb_generic_write(d,&b,2); + + return 0; +} + +static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + u8 b_streaming[2] = { SET_STREAMING, onoff }; + u8 b_rst_pid = RESET_PID_FILTER; + + dvb_usb_generic_write(adap->dev, b_streaming, 2); + + if (onoff == 0) + dvb_usb_generic_write(adap->dev, &b_rst_pid, 1); + return 0; +} + +static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) +{ + u8 b_pid[4]; + pid = onoff ? pid : 0; + + b_pid[0] = SET_PID_FILTER; + b_pid[1] = index; + b_pid[2] = pid & 0xff; + b_pid[3] = (pid >> 8) & 0x1f; + + return dvb_usb_generic_write(adap->dev, b_pid, 4); +} + +/* remote control */ +/* key list for the tiny remote control (Yakumo, don't know about the others) */ +static struct rc_map_table rc_map_dtt200u_table[] = { + { 0x8001, KEY_MUTE }, + { 0x8002, KEY_CHANNELDOWN }, + { 0x8003, KEY_VOLUMEDOWN }, + { 0x8004, KEY_1 }, + { 0x8005, KEY_2 }, + { 0x8006, KEY_3 }, + { 0x8007, KEY_4 }, + { 0x8008, KEY_5 }, + { 0x8009, KEY_6 }, + { 0x800a, KEY_7 }, + { 0x800c, KEY_ZOOM }, + { 0x800d, KEY_0 }, + { 0x800e, KEY_SELECT }, + { 0x8012, KEY_POWER }, + { 0x801a, KEY_CHANNELUP }, + { 0x801b, KEY_8 }, + { 0x801e, KEY_VOLUMEUP }, + { 0x801f, KEY_9 }, +}; + +static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd = GET_RC_CODE; + dvb_usb_generic_rw(d,&cmd,1,key,5,0); + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + +static int dtt200u_frontend_attach(struct dvb_usb_adapter *adap) +{ + adap->fe_adap[0].fe = dtt200u_fe_attach(adap->dev); + return 0; +} + +static struct dvb_usb_device_properties dtt200u_properties; +static struct dvb_usb_device_properties wt220u_fc_properties; +static struct dvb_usb_device_properties wt220u_properties; +static struct dvb_usb_device_properties wt220u_zl0353_properties; +static struct dvb_usb_device_properties wt220u_miglia_properties; + +static int dtt200u_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (0 == dvb_usb_device_init(intf, &dtt200u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, + THIS_MODULE, NULL, adapter_nr)) + return 0; + + return -ENODEV; +} + +static struct usb_device_id dtt200u_usb_table [] = { + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_WARM) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_WARM) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZL0353_WARM) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_FC_WARM) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_ZAP250_COLD) }, + { USB_DEVICE(USB_VID_MIGLIA, USB_PID_WT220U_ZAP250_COLD) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, dtt200u_usb_table); + +static struct dvb_usb_device_properties dtt200u_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-dtt200u-01.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, + .pid_filter_count = 15, + + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .power_ctrl = dtt200u_power_ctrl, + + .rc.legacy = { + .rc_interval = 300, + .rc_map_table = rc_map_dtt200u_table, + .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), + .rc_query = dtt200u_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { .name = "WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)", + .cold_ids = { &dtt200u_usb_table[0], NULL }, + .warm_ids = { &dtt200u_usb_table[1], NULL }, + }, + { NULL }, + } +}; + +static struct dvb_usb_device_properties wt220u_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-wt220u-02.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, + .pid_filter_count = 15, + + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .power_ctrl = dtt200u_power_ctrl, + + .rc.legacy = { + .rc_interval = 300, + .rc_map_table = rc_map_dtt200u_table, + .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), + .rc_query = dtt200u_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { .name = "WideView WT-220U PenType Receiver (Typhoon/Freecom)", + .cold_ids = { &dtt200u_usb_table[2], &dtt200u_usb_table[8], NULL }, + .warm_ids = { &dtt200u_usb_table[3], NULL }, + }, + { NULL }, + } +}; + +static struct dvb_usb_device_properties wt220u_fc_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-wt220u-fc03.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, + .pid_filter_count = 15, + + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .power_ctrl = dtt200u_power_ctrl, + + .rc.legacy = { + .rc_interval = 300, + .rc_map_table = rc_map_dtt200u_table, + .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), + .rc_query = dtt200u_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { .name = "WideView WT-220U PenType Receiver (Typhoon/Freecom)", + .cold_ids = { &dtt200u_usb_table[6], NULL }, + .warm_ids = { &dtt200u_usb_table[7], NULL }, + }, + { NULL }, + } +}; + +static struct dvb_usb_device_properties wt220u_zl0353_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-wt220u-zl0353-01.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING, + .pid_filter_count = 15, + + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .power_ctrl = dtt200u_power_ctrl, + + .rc.legacy = { + .rc_interval = 300, + .rc_map_table = rc_map_dtt200u_table, + .rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table), + .rc_query = dtt200u_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { .name = "WideView WT-220U PenType Receiver (based on ZL353)", + .cold_ids = { &dtt200u_usb_table[4], NULL }, + .warm_ids = { &dtt200u_usb_table[5], NULL }, + }, + { NULL }, + } +}; + +static struct dvb_usb_device_properties wt220u_miglia_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-wt220u-miglia-01.fw", + + .num_adapters = 1, + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { .name = "WideView WT-220U PenType Receiver (Miglia)", + .cold_ids = { &dtt200u_usb_table[9], NULL }, + /* This device turns into WT220U_ZL0353_WARM when fw + has been uploaded */ + .warm_ids = { NULL }, + }, + { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver dtt200u_usb_driver = { + .name = "dvb_usb_dtt200u", + .probe = dtt200u_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dtt200u_usb_table, +}; + +module_usb_driver(dtt200u_usb_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/dtt200u.h b/drivers/media/usb/dvb-usb/dtt200u.h new file mode 100644 index 000000000000..005b0a7df358 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dtt200u.h @@ -0,0 +1,57 @@ +/* Common header file of Linux driver for the WideView/ Yakumo/ Hama/ + * Typhoon/ Yuan DVB-T USB2.0 receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_DTT200U_H_ +#define _DVB_USB_DTT200U_H_ + +#define DVB_USB_LOG_PREFIX "dtt200u" + +#include "dvb-usb.h" + +extern int dvb_usb_dtt200u_debug; +#define deb_info(args...) dprintk(dvb_usb_dtt200u_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_dtt200u_debug,0x02,args) + +/* guessed protocol description (reverse engineered): + * read + * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 + * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) + */ + +#define GET_SPEED 0x00 +#define GET_TUNE_STATUS 0x81 +#define GET_RC_CODE 0x84 +#define GET_CONFIGURATION 0x88 +#define GET_AGC 0x89 +#define GET_SNR 0x8a +#define GET_VIT_ERR_CNT 0x8c +#define GET_RS_ERR_CNT 0x8d +#define GET_RS_UNCOR_BLK_CNT 0x8e + +/* write + * 01 - init + * 02 - frequency (divided by 250000) + * 03 - bandwidth + * 04 - pid table (index pid(7:0) pid(12:8)) + * 05 - reset the pid table + * 08 - transfer switch + */ + +#define SET_INIT 0x01 +#define SET_RF_FREQ 0x02 +#define SET_BANDWIDTH 0x03 +#define SET_PID_FILTER 0x04 +#define RESET_PID_FILTER 0x05 +#define SET_STREAMING 0x08 + +extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d); + +#endif diff --git a/drivers/media/usb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c new file mode 100644 index 000000000000..3d11df41cac0 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dtv5100.c @@ -0,0 +1,224 @@ +/* + * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T + * + * Copyright (C) 2008 Antoine Jacquet <royale@zerezo.com> + * http://royale.zerezo.com/dtv5100/ + * + * Inspired by gl861.c and au6610.c drivers + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "dtv5100.h" +#include "zl10353.h" +#include "qt1010.h" + +/* debug */ +static int dvb_usb_dtv5100_debug; +module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u8 request; + u8 type; + u16 value; + u16 index; + + switch (wlen) { + case 1: + /* write { reg }, read { value } */ + request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_READ : + DTV5100_TUNER_READ); + type = USB_TYPE_VENDOR | USB_DIR_IN; + value = 0; + break; + case 2: + /* write { reg, value } */ + request = (addr == DTV5100_DEMOD_ADDR ? DTV5100_DEMOD_WRITE : + DTV5100_TUNER_WRITE); + type = USB_TYPE_VENDOR | USB_DIR_OUT; + value = wbuf[1]; + break; + default: + warn("wlen = %x, aborting.", wlen); + return -EINVAL; + } + index = (addr << 8) + wbuf[0]; + + msleep(1); /* avoid I2C errors */ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request, + type, value, index, rbuf, rlen, + DTV5100_USB_TIMEOUT); +} + +/* I2C */ +static int dtv5100_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, msg[i+1].buf, + msg[i+1].len) < 0) + break; + i++; + } else if (dtv5100_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 dtv5100_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dtv5100_i2c_algo = { + .master_xfer = dtv5100_i2c_xfer, + .functionality = dtv5100_i2c_func, +}; + +/* Callbacks for DVB USB */ +static struct zl10353_config dtv5100_zl10353_config = { + .demod_address = DTV5100_DEMOD_ADDR, + .no_tuner = 1, + .parallel_ts = 1, +}; + +static int dtv5100_frontend_attach(struct dvb_usb_adapter *adap) +{ + adap->fe_adap[0].fe = dvb_attach(zl10353_attach, &dtv5100_zl10353_config, + &adap->dev->i2c_adap); + if (adap->fe_adap[0].fe == NULL) + return -EIO; + + /* disable i2c gate, or it won't work... is this safe? */ + adap->fe_adap[0].fe->ops.i2c_gate_ctrl = NULL; + + return 0; +} + +static struct qt1010_config dtv5100_qt1010_config = { + .i2c_address = DTV5100_TUNER_ADDR +}; + +static int dtv5100_tuner_attach(struct dvb_usb_adapter *adap) +{ + return dvb_attach(qt1010_attach, + adap->fe_adap[0].fe, &adap->dev->i2c_adap, + &dtv5100_qt1010_config) == NULL ? -ENODEV : 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties dtv5100_properties; + +static int dtv5100_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int i, ret; + struct usb_device *udev = interface_to_usbdev(intf); + + /* initialize non qt1010/zl10353 part? */ + for (i = 0; dtv5100_init[i].request; i++) { + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + dtv5100_init[i].request, + USB_TYPE_VENDOR | USB_DIR_OUT, + dtv5100_init[i].value, + dtv5100_init[i].index, NULL, 0, + DTV5100_USB_TIMEOUT); + if (ret) + return ret; + } + + ret = dvb_usb_device_init(intf, &dtv5100_properties, + THIS_MODULE, NULL, adapter_nr); + if (ret) + return ret; + + return 0; +} + +static struct usb_device_id dtv5100_table[] = { + { USB_DEVICE(0x06be, 0xa232) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, dtv5100_table); + +static struct dvb_usb_device_properties dtv5100_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + .frontend_attach = dtv5100_frontend_attach, + .tuner_attach = dtv5100_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } }, + + .i2c_algo = &dtv5100_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "AME DTV-5100 USB2.0 DVB-T", + .cold_ids = { NULL }, + .warm_ids = { &dtv5100_table[0], NULL }, + }, + } +}; + +static struct usb_driver dtv5100_driver = { + .name = "dvb_usb_dtv5100", + .probe = dtv5100_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dtv5100_table, +}; + +module_usb_driver(dtv5100_driver); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/dtv5100.h b/drivers/media/usb/dvb-usb/dtv5100.h new file mode 100644 index 000000000000..93e96e04a82a --- /dev/null +++ b/drivers/media/usb/dvb-usb/dtv5100.h @@ -0,0 +1,51 @@ +/* + * DVB USB Linux driver for AME DTV-5100 USB2.0 DVB-T + * + * Copyright (C) 2008 Antoine Jacquet <royale@zerezo.com> + * http://royale.zerezo.com/dtv5100/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _DVB_USB_DTV5100_H_ +#define _DVB_USB_DTV5100_H_ + +#define DVB_USB_LOG_PREFIX "dtv5100" +#include "dvb-usb.h" + +#define DTV5100_USB_TIMEOUT 500 + +#define DTV5100_DEMOD_ADDR 0x00 +#define DTV5100_DEMOD_WRITE 0xc0 +#define DTV5100_DEMOD_READ 0xc1 + +#define DTV5100_TUNER_ADDR 0xc4 +#define DTV5100_TUNER_WRITE 0xc7 +#define DTV5100_TUNER_READ 0xc8 + +#define DRIVER_AUTHOR "Antoine Jacquet, http://royale.zerezo.com/" +#define DRIVER_DESC "AME DTV-5100 USB2.0 DVB-T" + +static struct { + u8 request; + u8 value; + u16 index; +} dtv5100_init[] = { + { 0x000000c5, 0x00000000, 0x00000001 }, + { 0x000000c5, 0x00000001, 0x00000001 }, + { } /* Terminating entry */ +}; + +#endif diff --git a/drivers/media/usb/dvb-usb/dvb-usb-common.h b/drivers/media/usb/dvb-usb/dvb-usb-common.h new file mode 100644 index 000000000000..6b7b2a89242e --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb-common.h @@ -0,0 +1,52 @@ +/* dvb-usb-common.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * a header file containing prototypes and types for internal use of the dvb-usb-lib + */ +#ifndef _DVB_USB_COMMON_H_ +#define _DVB_USB_COMMON_H_ + +#define DVB_USB_LOG_PREFIX "dvb-usb" +#include "dvb-usb.h" + +extern int dvb_usb_debug; +extern int dvb_usb_disable_rc_polling; + +#define deb_info(args...) dprintk(dvb_usb_debug,0x001,args) +#define deb_xfer(args...) dprintk(dvb_usb_debug,0x002,args) +#define deb_pll(args...) dprintk(dvb_usb_debug,0x004,args) +#define deb_ts(args...) dprintk(dvb_usb_debug,0x008,args) +#define deb_err(args...) dprintk(dvb_usb_debug,0x010,args) +#define deb_rc(args...) dprintk(dvb_usb_debug,0x020,args) +#define deb_fw(args...) dprintk(dvb_usb_debug,0x040,args) +#define deb_mem(args...) dprintk(dvb_usb_debug,0x080,args) +#define deb_uxfer(args...) dprintk(dvb_usb_debug,0x100,args) + +/* commonly used methods */ +extern int dvb_usb_download_firmware(struct usb_device *, struct dvb_usb_device_properties *); + +extern int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff); + +extern int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properties *props); +extern int usb_urb_exit(struct usb_data_stream *stream); +extern int usb_urb_submit(struct usb_data_stream *stream); +extern int usb_urb_kill(struct usb_data_stream *stream); + +extern int dvb_usb_adapter_stream_init(struct dvb_usb_adapter *adap); +extern int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap); + +extern int dvb_usb_i2c_init(struct dvb_usb_device *); +extern int dvb_usb_i2c_exit(struct dvb_usb_device *); + +extern int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, + short *adapter_nums); +extern int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap); +extern int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap); +extern int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap); + +extern int dvb_usb_remote_init(struct dvb_usb_device *); +extern int dvb_usb_remote_exit(struct dvb_usb_device *); + +#endif diff --git a/drivers/media/usb/dvb-usb/dvb-usb-dvb.c b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c new file mode 100644 index 000000000000..719413b15f20 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb-dvb.c @@ -0,0 +1,288 @@ +/* dvb-usb-dvb.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing and handling the + * linux-dvb API. + */ +#include "dvb-usb-common.h" + +/* does the complete input transfer handling */ +static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv; + int newfeedcount, ret; + + if (adap == NULL) + return -ENODEV; + + if ((adap->active_fe < 0) || + (adap->active_fe >= adap->num_frontends_initialized)) { + return -EINVAL; + } + + newfeedcount = adap->feedcount + (onoff ? 1 : -1); + + /* stop feed before setting a new pid if there will be no pid anymore */ + if (newfeedcount == 0) { + deb_ts("stop feeding\n"); + usb_urb_kill(&adap->fe_adap[adap->active_fe].stream); + + if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) { + ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 0); + if (ret < 0) { + err("error while stopping stream."); + return ret; + } + } + } + + adap->feedcount = newfeedcount; + + /* activate the pid on the device specific pid_filter */ + deb_ts("setting pid (%s): %5d %04x at index %d '%s'\n", + adap->fe_adap[adap->active_fe].pid_filtering ? + "yes" : "no", dvbdmxfeed->pid, dvbdmxfeed->pid, + dvbdmxfeed->index, onoff ? "on" : "off"); + if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER && + adap->fe_adap[adap->active_fe].pid_filtering && + adap->props.fe[adap->active_fe].pid_filter != NULL) + adap->props.fe[adap->active_fe].pid_filter(adap, dvbdmxfeed->index, dvbdmxfeed->pid, onoff); + + /* start the feed if this was the first feed and there is still a feed + * for reception. + */ + if (adap->feedcount == onoff && adap->feedcount > 0) { + deb_ts("submitting all URBs\n"); + usb_urb_submit(&adap->fe_adap[adap->active_fe].stream); + + deb_ts("controlling pid parser\n"); + if (adap->props.fe[adap->active_fe].caps & DVB_USB_ADAP_HAS_PID_FILTER && + adap->props.fe[adap->active_fe].caps & + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF && + adap->props.fe[adap->active_fe].pid_filter_ctrl != NULL) { + ret = adap->props.fe[adap->active_fe].pid_filter_ctrl(adap, + adap->fe_adap[adap->active_fe].pid_filtering); + if (ret < 0) { + err("could not handle pid_parser"); + return ret; + } + } + deb_ts("start feeding\n"); + if (adap->props.fe[adap->active_fe].streaming_ctrl != NULL) { + ret = adap->props.fe[adap->active_fe].streaming_ctrl(adap, 1); + if (ret < 0) { + err("error while enabling fifo."); + return ret; + } + } + + } + return 0; +} + +static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type); + return dvb_usb_ctrl_feed(dvbdmxfeed,1); +} + +static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type); + return dvb_usb_ctrl_feed(dvbdmxfeed,0); +} + +int dvb_usb_adapter_dvb_init(struct dvb_usb_adapter *adap, short *adapter_nums) +{ + int i; + int ret = dvb_register_adapter(&adap->dvb_adap, adap->dev->desc->name, + adap->dev->owner, &adap->dev->udev->dev, + adapter_nums); + + if (ret < 0) { + deb_info("dvb_register_adapter failed: error %d", ret); + goto err; + } + adap->dvb_adap.priv = adap; + + if (adap->dev->props.read_mac_address) { + if (adap->dev->props.read_mac_address(adap->dev,adap->dvb_adap.proposed_mac) == 0) + info("MAC address: %pM",adap->dvb_adap.proposed_mac); + else + err("MAC address reading failed."); + } + + + adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + adap->demux.priv = adap; + + adap->demux.filternum = 0; + for (i = 0; i < adap->props.num_frontends; i++) { + if (adap->demux.filternum < adap->fe_adap[i].max_feed_count) + adap->demux.filternum = adap->fe_adap[i].max_feed_count; + } + adap->demux.feednum = adap->demux.filternum; + adap->demux.start_feed = dvb_usb_start_feed; + adap->demux.stop_feed = dvb_usb_stop_feed; + adap->demux.write_to_decoder = NULL; + if ((ret = dvb_dmx_init(&adap->demux)) < 0) { + err("dvb_dmx_init failed: error %d",ret); + goto err_dmx; + } + + adap->dmxdev.filternum = adap->demux.filternum; + adap->dmxdev.demux = &adap->demux.dmx; + adap->dmxdev.capabilities = 0; + if ((ret = dvb_dmxdev_init(&adap->dmxdev, &adap->dvb_adap)) < 0) { + err("dvb_dmxdev_init failed: error %d",ret); + goto err_dmx_dev; + } + + if ((ret = dvb_net_init(&adap->dvb_adap, &adap->dvb_net, + &adap->demux.dmx)) < 0) { + err("dvb_net_init failed: error %d",ret); + goto err_net_init; + } + + adap->state |= DVB_USB_ADAP_STATE_DVB; + return 0; + +err_net_init: + dvb_dmxdev_release(&adap->dmxdev); +err_dmx_dev: + dvb_dmx_release(&adap->demux); +err_dmx: + dvb_unregister_adapter(&adap->dvb_adap); +err: + return ret; +} + +int dvb_usb_adapter_dvb_exit(struct dvb_usb_adapter *adap) +{ + if (adap->state & DVB_USB_ADAP_STATE_DVB) { + deb_info("unregistering DVB part\n"); + dvb_net_release(&adap->dvb_net); + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); + dvb_dmx_release(&adap->demux); + dvb_unregister_adapter(&adap->dvb_adap); + adap->state &= ~DVB_USB_ADAP_STATE_DVB; + } + return 0; +} + +static int dvb_usb_set_active_fe(struct dvb_frontend *fe, int onoff) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + + int ret = (adap->props.frontend_ctrl) ? + adap->props.frontend_ctrl(fe, onoff) : 0; + + if (ret < 0) { + err("frontend_ctrl request failed"); + return ret; + } + if (onoff) + adap->active_fe = fe->id; + + return 0; +} + +static int dvb_usb_fe_wakeup(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + + dvb_usb_device_power_ctrl(adap->dev, 1); + + dvb_usb_set_active_fe(fe, 1); + + if (adap->fe_adap[fe->id].fe_init) + adap->fe_adap[fe->id].fe_init(fe); + + return 0; +} + +static int dvb_usb_fe_sleep(struct dvb_frontend *fe) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + + if (adap->fe_adap[fe->id].fe_sleep) + adap->fe_adap[fe->id].fe_sleep(fe); + + dvb_usb_set_active_fe(fe, 0); + + return dvb_usb_device_power_ctrl(adap->dev, 0); +} + +int dvb_usb_adapter_frontend_init(struct dvb_usb_adapter *adap) +{ + int ret, i; + + /* register all given adapter frontends */ + for (i = 0; i < adap->props.num_frontends; i++) { + + if (adap->props.fe[i].frontend_attach == NULL) { + err("strange: '%s' #%d,%d " + "doesn't want to attach a frontend.", + adap->dev->desc->name, adap->id, i); + + return 0; + } + + ret = adap->props.fe[i].frontend_attach(adap); + if (ret || adap->fe_adap[i].fe == NULL) { + /* only print error when there is no FE at all */ + if (i == 0) + err("no frontend was attached by '%s'", + adap->dev->desc->name); + + return 0; + } + + adap->fe_adap[i].fe->id = i; + + /* re-assign sleep and wakeup functions */ + adap->fe_adap[i].fe_init = adap->fe_adap[i].fe->ops.init; + adap->fe_adap[i].fe->ops.init = dvb_usb_fe_wakeup; + adap->fe_adap[i].fe_sleep = adap->fe_adap[i].fe->ops.sleep; + adap->fe_adap[i].fe->ops.sleep = dvb_usb_fe_sleep; + + if (dvb_register_frontend(&adap->dvb_adap, adap->fe_adap[i].fe)) { + err("Frontend %d registration failed.", i); + dvb_frontend_detach(adap->fe_adap[i].fe); + adap->fe_adap[i].fe = NULL; + /* In error case, do not try register more FEs, + * still leaving already registered FEs alive. */ + if (i == 0) + return -ENODEV; + else + return 0; + } + + /* only attach the tuner if the demod is there */ + if (adap->props.fe[i].tuner_attach != NULL) + adap->props.fe[i].tuner_attach(adap); + + adap->num_frontends_initialized++; + } + + return 0; +} + +int dvb_usb_adapter_frontend_exit(struct dvb_usb_adapter *adap) +{ + int i = adap->num_frontends_initialized - 1; + + /* unregister all given adapter frontends */ + for (; i >= 0; i--) { + if (adap->fe_adap[i].fe != NULL) { + dvb_unregister_frontend(adap->fe_adap[i].fe); + dvb_frontend_detach(adap->fe_adap[i].fe); + } + } + adap->num_frontends_initialized = 0; + + return 0; +} diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c new file mode 100644 index 000000000000..733a7ff7b207 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c @@ -0,0 +1,146 @@ +/* dvb-usb-firmware.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices. + * + * FIXME: This part does actually not belong to dvb-usb, but to the usb-subsystem. + */ +#include "dvb-usb-common.h" + +#include <linux/usb.h> + +struct usb_cypress_controller { + int id; + const char *name; /* name of the usb controller */ + u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */ +}; + +static struct usb_cypress_controller cypress[] = { + { .id = DEVICE_SPECIFIC, .name = "Device specific", .cpu_cs_register = 0 }, + { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 }, + { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 }, + { .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 }, +}; + +/* + * load a firmware packet to the device + */ +static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev,0), + 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5000); +} + +int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type) +{ + struct hexline hx; + u8 reset; + int ret,pos=0; + + /* stop the CPU */ + reset = 1; + if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1) + err("could not stop the USB controller CPU."); + + while ((ret = dvb_usb_get_hexline(fw,&hx,&pos)) > 0) { + deb_fw("writing to address 0x%04x (buffer: 0x%02x %02x)\n",hx.addr,hx.len,hx.chk); + ret = usb_cypress_writemem(udev,hx.addr,hx.data,hx.len); + + if (ret != hx.len) { + err("error while transferring firmware " + "(transferred size: %d, block size: %d)", + ret,hx.len); + ret = -EINVAL; + break; + } + } + if (ret < 0) { + err("firmware download failed at %d with %d",pos,ret); + return ret; + } + + if (ret == 0) { + /* restart the CPU */ + reset = 0; + if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + } else + ret = -EIO; + + return ret; +} +EXPORT_SYMBOL(usb_cypress_load_firmware); + +int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_properties *props) +{ + int ret; + const struct firmware *fw = NULL; + + if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + props->firmware,ret); + return ret; + } + + info("downloading firmware from file '%s'",props->firmware); + + switch (props->usb_ctrl) { + case CYPRESS_AN2135: + case CYPRESS_AN2235: + case CYPRESS_FX2: + ret = usb_cypress_load_firmware(udev, fw, props->usb_ctrl); + break; + case DEVICE_SPECIFIC: + if (props->download_firmware) + ret = props->download_firmware(udev,fw); + else { + err("BUG: driver didn't specified a download_firmware-callback, although it claims to have a DEVICE_SPECIFIC one."); + ret = -EINVAL; + } + break; + default: + ret = -EINVAL; + break; + } + + release_firmware(fw); + return ret; +} + +int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, + int *pos) +{ + u8 *b = (u8 *) &fw->data[*pos]; + int data_offs = 4; + if (*pos >= fw->size) + return 0; + + memset(hx,0,sizeof(struct hexline)); + + hx->len = b[0]; + + if ((*pos + hx->len + 4) >= fw->size) + return -EINVAL; + + hx->addr = b[1] | (b[2] << 8); + hx->type = b[3]; + + if (hx->type == 0x04) { + /* b[4] and b[5] are the Extended linear address record data field */ + hx->addr |= (b[4] << 24) | (b[5] << 16); +/* hx->len -= 2; + data_offs += 2; */ + } + memcpy(hx->data,&b[data_offs],hx->len); + hx->chk = b[hx->len + data_offs]; + + *pos += hx->len + 5; + + return *pos; +} +EXPORT_SYMBOL(dvb_usb_get_hexline); diff --git a/drivers/media/usb/dvb-usb/dvb-usb-i2c.c b/drivers/media/usb/dvb-usb/dvb-usb-i2c.c new file mode 100644 index 000000000000..88e4a62abc44 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb-i2c.c @@ -0,0 +1,43 @@ +/* dvb-usb-i2c.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for (de-)initializing an I2C adapter. + */ +#include "dvb-usb-common.h" + +int dvb_usb_i2c_init(struct dvb_usb_device *d) +{ + int ret = 0; + + if (!(d->props.caps & DVB_USB_IS_AN_I2C_ADAPTER)) + return 0; + + if (d->props.i2c_algo == NULL) { + err("no i2c algorithm specified"); + return -EINVAL; + } + + strlcpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name)); + d->i2c_adap.algo = d->props.i2c_algo; + d->i2c_adap.algo_data = NULL; + d->i2c_adap.dev.parent = &d->udev->dev; + + i2c_set_adapdata(&d->i2c_adap, d); + + if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0) + err("could not add i2c adapter"); + + d->state |= DVB_USB_STATE_I2C; + + return ret; +} + +int dvb_usb_i2c_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_I2C) + i2c_del_adapter(&d->i2c_adap); + d->state &= ~DVB_USB_STATE_I2C; + return 0; +} diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c new file mode 100644 index 000000000000..169196ec2d4e --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -0,0 +1,304 @@ +/* + * DVB USB library - provides a generic interface for a DVB USB device driver. + * + * dvb-usb-init.c + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dvb-usb-common.h" + +/* debug */ +int dvb_usb_debug; +module_param_named(debug, dvb_usb_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64,mem=128,uxfer=256 (or-able))." DVB_USB_DEBUG_STATUS); + +int dvb_usb_disable_rc_polling; +module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644); +MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0)."); + +static int dvb_usb_force_pid_filter_usage; +module_param_named(force_pid_filter_usage, dvb_usb_force_pid_filter_usage, int, 0444); +MODULE_PARM_DESC(force_pid_filter_usage, "force all dvb-usb-devices to use a PID filter, if any (default: 0)."); + +static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs) +{ + struct dvb_usb_adapter *adap; + int ret, n, o; + + for (n = 0; n < d->props.num_adapters; n++) { + adap = &d->adapter[n]; + adap->dev = d; + adap->id = n; + + memcpy(&adap->props, &d->props.adapter[n], sizeof(struct dvb_usb_adapter_properties)); + + for (o = 0; o < adap->props.num_frontends; o++) { + struct dvb_usb_adapter_fe_properties *props = &adap->props.fe[o]; + /* speed - when running at FULL speed we need a HW PID filter */ + if (d->udev->speed == USB_SPEED_FULL && !(props->caps & DVB_USB_ADAP_HAS_PID_FILTER)) { + err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)"); + return -ENODEV; + } + + if ((d->udev->speed == USB_SPEED_FULL && props->caps & DVB_USB_ADAP_HAS_PID_FILTER) || + (props->caps & DVB_USB_ADAP_NEED_PID_FILTERING)) { + info("will use the device's hardware PID filter (table count: %d).", props->pid_filter_count); + adap->fe_adap[o].pid_filtering = 1; + adap->fe_adap[o].max_feed_count = props->pid_filter_count; + } else { + info("will pass the complete MPEG2 transport stream to the software demuxer."); + adap->fe_adap[o].pid_filtering = 0; + adap->fe_adap[o].max_feed_count = 255; + } + + if (!adap->fe_adap[o].pid_filtering && + dvb_usb_force_pid_filter_usage && + props->caps & DVB_USB_ADAP_HAS_PID_FILTER) { + info("pid filter enabled by module option."); + adap->fe_adap[o].pid_filtering = 1; + adap->fe_adap[o].max_feed_count = props->pid_filter_count; + } + + if (props->size_of_priv > 0) { + adap->fe_adap[o].priv = kzalloc(props->size_of_priv, GFP_KERNEL); + if (adap->fe_adap[o].priv == NULL) { + err("no memory for priv for adapter %d fe %d.", n, o); + return -ENOMEM; + } + } + } + + if (adap->props.size_of_priv > 0) { + adap->priv = kzalloc(adap->props.size_of_priv, GFP_KERNEL); + if (adap->priv == NULL) { + err("no memory for priv for adapter %d.", n); + return -ENOMEM; + } + } + + if ((ret = dvb_usb_adapter_stream_init(adap)) || + (ret = dvb_usb_adapter_dvb_init(adap, adapter_nrs)) || + (ret = dvb_usb_adapter_frontend_init(adap))) { + return ret; + } + + /* use exclusive FE lock if there is multiple shared FEs */ + if (adap->fe_adap[1].fe) + adap->dvb_adap.mfe_shared = 1; + + d->num_adapters_initialized++; + d->state |= DVB_USB_STATE_DVB; + } + + /* + * when reloading the driver w/o replugging the device + * sometimes a timeout occures, this helps + */ + if (d->props.generic_bulk_ctrl_endpoint != 0) { + usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + } + + return 0; +} + +static int dvb_usb_adapter_exit(struct dvb_usb_device *d) +{ + int n; + + for (n = 0; n < d->num_adapters_initialized; n++) { + dvb_usb_adapter_frontend_exit(&d->adapter[n]); + dvb_usb_adapter_dvb_exit(&d->adapter[n]); + dvb_usb_adapter_stream_exit(&d->adapter[n]); + kfree(d->adapter[n].priv); + } + d->num_adapters_initialized = 0; + d->state &= ~DVB_USB_STATE_DVB; + return 0; +} + + +/* general initialization functions */ +static int dvb_usb_exit(struct dvb_usb_device *d) +{ + deb_info("state before exiting everything: %x\n", d->state); + dvb_usb_remote_exit(d); + dvb_usb_adapter_exit(d); + dvb_usb_i2c_exit(d); + deb_info("state should be zero now: %x\n", d->state); + d->state = DVB_USB_STATE_INIT; + kfree(d->priv); + kfree(d); + return 0; +} + +static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) +{ + int ret = 0; + + mutex_init(&d->usb_mutex); + mutex_init(&d->i2c_mutex); + + d->state = DVB_USB_STATE_INIT; + + if (d->props.size_of_priv > 0) { + d->priv = kzalloc(d->props.size_of_priv, GFP_KERNEL); + if (d->priv == NULL) { + err("no memory for priv in 'struct dvb_usb_device'"); + return -ENOMEM; + } + } + + /* check the capabilities and set appropriate variables */ + dvb_usb_device_power_ctrl(d, 1); + + if ((ret = dvb_usb_i2c_init(d)) || + (ret = dvb_usb_adapter_init(d, adapter_nums))) { + dvb_usb_exit(d); + return ret; + } + + if ((ret = dvb_usb_remote_init(d))) + err("could not initialize remote control."); + + dvb_usb_device_power_ctrl(d, 0); + + return 0; +} + +/* determine the name and the state of the just found USB device */ +static struct dvb_usb_device_description *dvb_usb_find_device(struct usb_device *udev, struct dvb_usb_device_properties *props, int *cold) +{ + int i, j; + struct dvb_usb_device_description *desc = NULL; + + *cold = -1; + + for (i = 0; i < props->num_device_descs; i++) { + + for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) { + deb_info("check for cold %x %x\n", props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct); + if (props->devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && + props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { + *cold = 1; + desc = &props->devices[i]; + break; + } + } + + if (desc != NULL) + break; + + for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) { + deb_info("check for warm %x %x\n", props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct); + if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && + props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { + *cold = 0; + desc = &props->devices[i]; + break; + } + } + } + + if (desc != NULL && props->identify_state != NULL) + props->identify_state(udev, props, &desc, cold); + + return desc; +} + +int dvb_usb_device_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (onoff) + d->powered++; + else + d->powered--; + + if (d->powered == 0 || (onoff && d->powered == 1)) { /* when switching from 1 to 0 or from 0 to 1 */ + deb_info("power control: %d\n", onoff); + if (d->props.power_ctrl) + return d->props.power_ctrl(d, onoff); + } + return 0; +} + +/* + * USB + */ +int dvb_usb_device_init(struct usb_interface *intf, + struct dvb_usb_device_properties *props, + struct module *owner, struct dvb_usb_device **du, + short *adapter_nums) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct dvb_usb_device *d = NULL; + struct dvb_usb_device_description *desc = NULL; + + int ret = -ENOMEM, cold = 0; + + if (du != NULL) + *du = NULL; + + if ((desc = dvb_usb_find_device(udev, props, &cold)) == NULL) { + deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n"); + return -ENODEV; + } + + if (cold) { + info("found a '%s' in cold state, will try to load a firmware", desc->name); + ret = dvb_usb_download_firmware(udev, props); + if (!props->no_reconnect || ret != 0) + return ret; + } + + info("found a '%s' in warm state.", desc->name); + d = kzalloc(sizeof(struct dvb_usb_device), GFP_KERNEL); + if (d == NULL) { + err("no memory for 'struct dvb_usb_device'"); + return -ENOMEM; + } + + d->udev = udev; + memcpy(&d->props, props, sizeof(struct dvb_usb_device_properties)); + d->desc = desc; + d->owner = owner; + + usb_set_intfdata(intf, d); + + if (du != NULL) + *du = d; + + ret = dvb_usb_init(d, adapter_nums); + + if (ret == 0) + info("%s successfully initialized and connected.", desc->name); + else + info("%s error while loading driver (%d)", desc->name, ret); + return ret; +} +EXPORT_SYMBOL(dvb_usb_device_init); + +void dvb_usb_device_exit(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + const char *name = "generic DVB-USB module"; + + usb_set_intfdata(intf, NULL); + if (d != NULL && d->desc != NULL) { + name = d->desc->name; + dvb_usb_exit(d); + } + info("%s successfully deinitialized and disconnected.", name); + +} +EXPORT_SYMBOL(dvb_usb_device_exit); + +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/dvb-usb-remote.c b/drivers/media/usb/dvb-usb/dvb-usb-remote.c new file mode 100644 index 000000000000..41bacff24960 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb-remote.c @@ -0,0 +1,391 @@ +/* dvb-usb-remote.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing the input-device and for handling remote-control-queries. + */ +#include "dvb-usb-common.h" +#include <linux/usb/input.h> + +static unsigned int +legacy_dvb_usb_get_keymap_index(const struct input_keymap_entry *ke, + struct rc_map_table *keymap, + unsigned int keymap_size) +{ + unsigned int index; + unsigned int scancode; + + if (ke->flags & INPUT_KEYMAP_BY_INDEX) { + index = ke->index; + } else { + if (input_scancode_to_scalar(ke, &scancode)) + return keymap_size; + + /* See if we can match the raw key code. */ + for (index = 0; index < keymap_size; index++) + if (keymap[index].scancode == scancode) + break; + + /* See if there is an unused hole in the map */ + if (index >= keymap_size) { + for (index = 0; index < keymap_size; index++) { + if (keymap[index].keycode == KEY_RESERVED || + keymap[index].keycode == KEY_UNKNOWN) { + break; + } + } + } + } + + return index; +} + +static int legacy_dvb_usb_getkeycode(struct input_dev *dev, + struct input_keymap_entry *ke) +{ + struct dvb_usb_device *d = input_get_drvdata(dev); + struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; + unsigned int keymap_size = d->props.rc.legacy.rc_map_size; + unsigned int index; + + index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size); + if (index >= keymap_size) + return -EINVAL; + + ke->keycode = keymap[index].keycode; + if (ke->keycode == KEY_UNKNOWN) + ke->keycode = KEY_RESERVED; + ke->len = sizeof(keymap[index].scancode); + memcpy(&ke->scancode, &keymap[index].scancode, ke->len); + ke->index = index; + + return 0; +} + +static int legacy_dvb_usb_setkeycode(struct input_dev *dev, + const struct input_keymap_entry *ke, + unsigned int *old_keycode) +{ + struct dvb_usb_device *d = input_get_drvdata(dev); + struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; + unsigned int keymap_size = d->props.rc.legacy.rc_map_size; + unsigned int index; + + index = legacy_dvb_usb_get_keymap_index(ke, keymap, keymap_size); + /* + * FIXME: Currently, it is not possible to increase the size of + * scancode table. For it to happen, one possibility + * would be to allocate a table with key_map_size + 1, + * copying data, appending the new key on it, and freeing + * the old one - or maybe just allocating some spare space + */ + if (index >= keymap_size) + return -EINVAL; + + *old_keycode = keymap[index].keycode; + keymap->keycode = ke->keycode; + __set_bit(ke->keycode, dev->keybit); + + if (*old_keycode != KEY_RESERVED) { + __clear_bit(*old_keycode, dev->keybit); + for (index = 0; index < keymap_size; index++) { + if (keymap[index].keycode == *old_keycode) { + __set_bit(*old_keycode, dev->keybit); + break; + } + } + } + + return 0; +} + +/* Remote-control poll function - called every dib->rc_query_interval ms to see + * whether the remote control has received anything. + * + * TODO: Fix the repeat rate of the input device. + */ +static void legacy_dvb_usb_read_remote_control(struct work_struct *work) +{ + struct dvb_usb_device *d = + container_of(work, struct dvb_usb_device, rc_query_work.work); + u32 event; + int state; + + /* TODO: need a lock here. We can simply skip checking for the remote control + if we're busy. */ + + /* when the parameter has been set to 1 via sysfs while the driver was running */ + if (dvb_usb_disable_rc_polling) + return; + + if (d->props.rc.legacy.rc_query(d,&event,&state)) { + err("error while querying for an remote control event."); + goto schedule; + } + + + switch (state) { + case REMOTE_NO_KEY_PRESSED: + break; + case REMOTE_KEY_PRESSED: + deb_rc("key pressed\n"); + d->last_event = event; + case REMOTE_KEY_REPEAT: + deb_rc("key repeated\n"); + input_event(d->input_dev, EV_KEY, event, 1); + input_sync(d->input_dev); + input_event(d->input_dev, EV_KEY, d->last_event, 0); + input_sync(d->input_dev); + break; + default: + break; + } + +/* improved repeat handling ??? + switch (state) { + case REMOTE_NO_KEY_PRESSED: + deb_rc("NO KEY PRESSED\n"); + if (d->last_state != REMOTE_NO_KEY_PRESSED) { + deb_rc("releasing event %d\n",d->last_event); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(d->rc_input_dev); + } + d->last_state = REMOTE_NO_KEY_PRESSED; + d->last_event = 0; + break; + case REMOTE_KEY_PRESSED: + deb_rc("KEY PRESSED\n"); + deb_rc("pressing event %d\n",event); + + input_event(d->rc_input_dev, EV_KEY, event, 1); + input_sync(d->rc_input_dev); + + d->last_event = event; + d->last_state = REMOTE_KEY_PRESSED; + break; + case REMOTE_KEY_REPEAT: + deb_rc("KEY_REPEAT\n"); + if (d->last_state != REMOTE_NO_KEY_PRESSED) { + deb_rc("repeating event %d\n",d->last_event); + input_event(d->rc_input_dev, EV_KEY, d->last_event, 2); + input_sync(d->rc_input_dev); + d->last_state = REMOTE_KEY_REPEAT; + } + default: + break; + } +*/ + +schedule: + schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval)); +} + +static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d) +{ + int i, err, rc_interval; + struct input_dev *input_dev; + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + input_dev->evbit[0] = BIT_MASK(EV_KEY); + input_dev->name = "IR-receiver inside an USB DVB receiver"; + input_dev->phys = d->rc_phys; + usb_to_input_id(d->udev, &input_dev->id); + input_dev->dev.parent = &d->udev->dev; + d->input_dev = input_dev; + d->rc_dev = NULL; + + input_dev->getkeycode = legacy_dvb_usb_getkeycode; + input_dev->setkeycode = legacy_dvb_usb_setkeycode; + + /* set the bits for the keys */ + deb_rc("key map size: %d\n", d->props.rc.legacy.rc_map_size); + for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) { + deb_rc("setting bit for event %d item %d\n", + d->props.rc.legacy.rc_map_table[i].keycode, i); + set_bit(d->props.rc.legacy.rc_map_table[i].keycode, input_dev->keybit); + } + + /* setting these two values to non-zero, we have to manage key repeats */ + input_dev->rep[REP_PERIOD] = d->props.rc.legacy.rc_interval; + input_dev->rep[REP_DELAY] = d->props.rc.legacy.rc_interval + 150; + + input_set_drvdata(input_dev, d); + + err = input_register_device(input_dev); + if (err) + input_free_device(input_dev); + + rc_interval = d->props.rc.legacy.rc_interval; + + INIT_DELAYED_WORK(&d->rc_query_work, legacy_dvb_usb_read_remote_control); + + info("schedule remote query interval to %d msecs.", rc_interval); + schedule_delayed_work(&d->rc_query_work, + msecs_to_jiffies(rc_interval)); + + d->state |= DVB_USB_STATE_REMOTE; + + return err; +} + +/* Remote-control poll function - called every dib->rc_query_interval ms to see + * whether the remote control has received anything. + * + * TODO: Fix the repeat rate of the input device. + */ +static void dvb_usb_read_remote_control(struct work_struct *work) +{ + struct dvb_usb_device *d = + container_of(work, struct dvb_usb_device, rc_query_work.work); + int err; + + /* TODO: need a lock here. We can simply skip checking for the remote control + if we're busy. */ + + /* when the parameter has been set to 1 via sysfs while the + * driver was running, or when bulk mode is enabled after IR init + */ + if (dvb_usb_disable_rc_polling || d->props.rc.core.bulk_mode) + return; + + err = d->props.rc.core.rc_query(d); + if (err) + err("error %d while querying for an remote control event.", err); + + schedule_delayed_work(&d->rc_query_work, + msecs_to_jiffies(d->props.rc.core.rc_interval)); +} + +static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d) +{ + int err, rc_interval; + struct rc_dev *dev; + + dev = rc_allocate_device(); + if (!dev) + return -ENOMEM; + + dev->driver_name = d->props.rc.core.module_name; + dev->map_name = d->props.rc.core.rc_codes; + dev->change_protocol = d->props.rc.core.change_protocol; + dev->allowed_protos = d->props.rc.core.allowed_protos; + dev->driver_type = d->props.rc.core.driver_type; + usb_to_input_id(d->udev, &dev->input_id); + dev->input_name = "IR-receiver inside an USB DVB receiver"; + dev->input_phys = d->rc_phys; + dev->dev.parent = &d->udev->dev; + dev->priv = d; + + err = rc_register_device(dev); + if (err < 0) { + rc_free_device(dev); + return err; + } + + d->input_dev = NULL; + d->rc_dev = dev; + + if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode) + return 0; + + /* Polling mode - initialize a work queue for handling it */ + INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control); + + rc_interval = d->props.rc.core.rc_interval; + + info("schedule remote query interval to %d msecs.", rc_interval); + schedule_delayed_work(&d->rc_query_work, + msecs_to_jiffies(rc_interval)); + + return 0; +} + +int dvb_usb_remote_init(struct dvb_usb_device *d) +{ + int err; + + if (dvb_usb_disable_rc_polling) + return 0; + + if (d->props.rc.legacy.rc_map_table && d->props.rc.legacy.rc_query) + d->props.rc.mode = DVB_RC_LEGACY; + else if (d->props.rc.core.rc_codes) + d->props.rc.mode = DVB_RC_CORE; + else + return 0; + + usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); + strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); + + /* Start the remote-control polling. */ + if (d->props.rc.legacy.rc_interval < 40) + d->props.rc.legacy.rc_interval = 100; /* default */ + + if (d->props.rc.mode == DVB_RC_LEGACY) + err = legacy_dvb_usb_remote_init(d); + else + err = rc_core_dvb_usb_remote_init(d); + if (err) + return err; + + d->state |= DVB_USB_STATE_REMOTE; + + return 0; +} + +int dvb_usb_remote_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_REMOTE) { + cancel_delayed_work_sync(&d->rc_query_work); + if (d->props.rc.mode == DVB_RC_LEGACY) + input_unregister_device(d->input_dev); + else + rc_unregister_device(d->rc_dev); + } + d->state &= ~DVB_USB_STATE_REMOTE; + return 0; +} + +#define DVB_USB_RC_NEC_EMPTY 0x00 +#define DVB_USB_RC_NEC_KEY_PRESSED 0x01 +#define DVB_USB_RC_NEC_KEY_REPEATED 0x02 +int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, + u8 keybuf[5], u32 *event, int *state) +{ + int i; + struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + switch (keybuf[0]) { + case DVB_USB_RC_NEC_EMPTY: + break; + case DVB_USB_RC_NEC_KEY_PRESSED: + if ((u8) ~keybuf[1] != keybuf[2] || + (u8) ~keybuf[3] != keybuf[4]) { + deb_err("remote control checksum failed.\n"); + break; + } + /* See if we can match the raw key code. */ + for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) + if (rc5_custom(&keymap[i]) == keybuf[1] && + rc5_data(&keymap[i]) == keybuf[3]) { + *event = keymap[i].keycode; + *state = REMOTE_KEY_PRESSED; + return 0; + } + deb_err("key mapping failed - no appropriate key found in keymapping\n"); + break; + case DVB_USB_RC_NEC_KEY_REPEATED: + *state = REMOTE_KEY_REPEAT; + break; + default: + deb_err("unknown type of remote status: %d\n",keybuf[0]); + break; + } + return 0; +} +EXPORT_SYMBOL(dvb_usb_nec_rc_key_to_event); diff --git a/drivers/media/usb/dvb-usb/dvb-usb-urb.c b/drivers/media/usb/dvb-usb/dvb-usb-urb.c new file mode 100644 index 000000000000..5c8f651344fc --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb-urb.c @@ -0,0 +1,121 @@ +/* dvb-usb-urb.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file keeps functions for initializing and handling the + * USB and URB stuff. + */ +#include "dvb-usb-common.h" + +int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, + u16 rlen, int delay_ms) +{ + int actlen,ret = -ENOMEM; + + if (!d || wbuf == NULL || wlen == 0) + return -EINVAL; + + if (d->props.generic_bulk_ctrl_endpoint == 0) { + err("endpoint for generic control not specified."); + return -EINVAL; + } + + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) + return ret; + + deb_xfer(">>> "); + debug_dump(wbuf,wlen,deb_xfer); + + ret = usb_bulk_msg(d->udev,usb_sndbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), wbuf,wlen,&actlen, + 2000); + + if (ret) + err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); + else + ret = actlen != wlen ? -1 : 0; + + /* an answer is expected, and no error before */ + if (!ret && rbuf && rlen) { + if (delay_ms) + msleep(delay_ms); + + ret = usb_bulk_msg(d->udev,usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint_response ? + d->props.generic_bulk_ctrl_endpoint_response : + d->props.generic_bulk_ctrl_endpoint),rbuf,rlen,&actlen, + 2000); + + if (ret) + err("recv bulk message failed: %d",ret); + else { + deb_xfer("<<< "); + debug_dump(rbuf,actlen,deb_xfer); + } + } + + mutex_unlock(&d->usb_mutex); + return ret; +} +EXPORT_SYMBOL(dvb_usb_generic_rw); + +int dvb_usb_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) +{ + return dvb_usb_generic_rw(d,buf,len,NULL,0,0); +} +EXPORT_SYMBOL(dvb_usb_generic_write); + +static void dvb_usb_data_complete(struct usb_data_stream *stream, u8 *buffer, size_t length) +{ + struct dvb_usb_adapter *adap = stream->user_priv; + if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB) + dvb_dmx_swfilter(&adap->demux, buffer, length); +} + +static void dvb_usb_data_complete_204(struct usb_data_stream *stream, u8 *buffer, size_t length) +{ + struct dvb_usb_adapter *adap = stream->user_priv; + if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB) + dvb_dmx_swfilter_204(&adap->demux, buffer, length); +} + +static void dvb_usb_data_complete_raw(struct usb_data_stream *stream, + u8 *buffer, size_t length) +{ + struct dvb_usb_adapter *adap = stream->user_priv; + if (adap->feedcount > 0 && adap->state & DVB_USB_ADAP_STATE_DVB) + dvb_dmx_swfilter_raw(&adap->demux, buffer, length); +} + +int dvb_usb_adapter_stream_init(struct dvb_usb_adapter *adap) +{ + int i, ret = 0; + for (i = 0; i < adap->props.num_frontends; i++) { + + adap->fe_adap[i].stream.udev = adap->dev->udev; + if (adap->props.fe[i].caps & DVB_USB_ADAP_RECEIVES_204_BYTE_TS) + adap->fe_adap[i].stream.complete = + dvb_usb_data_complete_204; + else + if (adap->props.fe[i].caps & DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD) + adap->fe_adap[i].stream.complete = + dvb_usb_data_complete_raw; + else + adap->fe_adap[i].stream.complete = dvb_usb_data_complete; + adap->fe_adap[i].stream.user_priv = adap; + ret = usb_urb_init(&adap->fe_adap[i].stream, + &adap->props.fe[i].stream); + if (ret < 0) + break; + } + return ret; +} + +int dvb_usb_adapter_stream_exit(struct dvb_usb_adapter *adap) +{ + int i; + for (i = 0; i < adap->props.num_frontends; i++) + usb_urb_exit(&adap->fe_adap[i].stream); + return 0; +} diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h new file mode 100644 index 000000000000..aab0f99bc892 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dvb-usb.h @@ -0,0 +1,483 @@ +/* dvb-usb.h is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * the headerfile, all dvb-usb-drivers have to include. + * + * TODO: clean-up the structures for unused fields and update the comments + */ +#ifndef __DVB_USB_H__ +#define __DVB_USB_H__ + +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <linux/mutex.h> +#include <media/rc-core.h> + +#include "dvb_frontend.h" +#include "dvb_demux.h" +#include "dvb_net.h" +#include "dmxdev.h" + +#include "dvb-pll.h" + +#include "dvb-usb-ids.h" + +/* debug */ +#ifdef CONFIG_DVB_USB_DEBUG +#define dprintk(var,level,args...) \ + do { if ((var & level)) { printk(args); } } while (0) + +#define debug_dump(b,l,func) {\ + int loop_; \ + for (loop_ = 0; loop_ < l; loop_++) func("%02x ", b[loop_]); \ + func("\n");\ +} +#define DVB_USB_DEBUG_STATUS +#else +#define dprintk(args...) +#define debug_dump(b,l,func) + +#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" + +#endif + +/* generic log methods - taken from usb.h */ +#ifndef DVB_USB_LOG_PREFIX + #define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)" +#endif + +#undef err +#define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) +#undef info +#define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) + +/** + * struct dvb_usb_device_description - name and its according USB IDs + * @name: real name of the box, regardless which DVB USB device class is in use + * @cold_ids: array of struct usb_device_id which describe the device in + * pre-firmware state + * @warm_ids: array of struct usb_device_id which describe the device in + * post-firmware state + * + * Each DVB USB device class can have one or more actual devices, this struct + * assigns a name to it. + */ +struct dvb_usb_device_description { + const char *name; + +#define DVB_USB_ID_MAX_NUM 15 + struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM]; + struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM]; +}; + +static inline u8 rc5_custom(struct rc_map_table *key) +{ + return (key->scancode >> 8) & 0xff; +} + +static inline u8 rc5_data(struct rc_map_table *key) +{ + return key->scancode & 0xff; +} + +static inline u16 rc5_scan(struct rc_map_table *key) +{ + return key->scancode & 0xffff; +} + +struct dvb_usb_device; +struct dvb_usb_adapter; +struct usb_data_stream; + +/** + * Properties of USB streaming - TODO this structure should be somewhere else + * describes the kind of USB transfer used for data-streaming. + * (BULK or ISOC) + */ +struct usb_data_stream_properties { +#define USB_BULK 1 +#define USB_ISOC 2 + int type; + int count; + int endpoint; + + union { + struct { + int buffersize; /* per URB */ + } bulk; + struct { + int framesperurb; + int framesize; + int interval; + } isoc; + } u; +}; + +/** + * struct dvb_usb_adapter_properties - properties of a dvb-usb-adapter. + * A DVB-USB-Adapter is basically a dvb_adapter which is present on a USB-device. + * @caps: capabilities of the DVB USB device. + * @pid_filter_count: number of PID filter position in the optional hardware + * PID-filter. + * @num_frontends: number of frontends of the DVB USB adapter. + * @frontend_ctrl: called to power on/off active frontend. + * @streaming_ctrl: called to start and stop the MPEG2-TS streaming of the + * device (not URB submitting/killing). + * @pid_filter_ctrl: called to en/disable the PID filter, if any. + * @pid_filter: called to set/unset a PID for filtering. + * @frontend_attach: called to attach the possible frontends (fill fe-field + * of struct dvb_usb_device). + * @tuner_attach: called to attach the correct tuner and to fill pll_addr, + * pll_desc and pll_init_buf of struct dvb_usb_device). + * @stream: configuration of the USB streaming + */ +struct dvb_usb_adapter_fe_properties { +#define DVB_USB_ADAP_HAS_PID_FILTER 0x01 +#define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02 +#define DVB_USB_ADAP_NEED_PID_FILTERING 0x04 +#define DVB_USB_ADAP_RECEIVES_204_BYTE_TS 0x08 +#define DVB_USB_ADAP_RECEIVES_RAW_PAYLOAD 0x10 + int caps; + int pid_filter_count; + + int (*streaming_ctrl) (struct dvb_usb_adapter *, int); + int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int); + int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int); + + int (*frontend_attach) (struct dvb_usb_adapter *); + int (*tuner_attach) (struct dvb_usb_adapter *); + + struct usb_data_stream_properties stream; + + int size_of_priv; +}; + +#define MAX_NO_OF_FE_PER_ADAP 3 +struct dvb_usb_adapter_properties { + int size_of_priv; + + int (*frontend_ctrl) (struct dvb_frontend *, int); + + int num_frontends; + struct dvb_usb_adapter_fe_properties fe[MAX_NO_OF_FE_PER_ADAP]; +}; + +/** + * struct dvb_rc_legacy - old properties of remote controller + * @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable + * remote control handling). + * @rc_map_size: number of items in @rc_map_table. + * @rc_query: called to query an event event. + * @rc_interval: time in ms between two queries. + */ +struct dvb_rc_legacy { +/* remote control properties */ +#define REMOTE_NO_KEY_PRESSED 0x00 +#define REMOTE_KEY_PRESSED 0x01 +#define REMOTE_KEY_REPEAT 0x02 + struct rc_map_table *rc_map_table; + int rc_map_size; + int (*rc_query) (struct dvb_usb_device *, u32 *, int *); + int rc_interval; +}; + +/** + * struct dvb_rc properties of remote controller, using rc-core + * @rc_codes: name of rc codes table + * @protocol: type of protocol(s) currently used by the driver + * @allowed_protos: protocol(s) supported by the driver + * @driver_type: Used to point if a device supports raw mode + * @change_protocol: callback to change protocol + * @rc_query: called to query an event event. + * @rc_interval: time in ms between two queries. + * @bulk_mode: device supports bulk mode for RC (disable polling mode) + */ +struct dvb_rc { + char *rc_codes; + u64 protocol; + u64 allowed_protos; + enum rc_driver_type driver_type; + int (*change_protocol)(struct rc_dev *dev, u64 rc_type); + char *module_name; + int (*rc_query) (struct dvb_usb_device *d); + int rc_interval; + bool bulk_mode; /* uses bulk mode */ +}; + +/** + * enum dvb_usb_mode - Specifies if it is using a legacy driver or a new one + * based on rc-core + * This is initialized/used only inside dvb-usb-remote.c. + * It shouldn't be set by the drivers. + */ +enum dvb_usb_mode { + DVB_RC_LEGACY, + DVB_RC_CORE, +}; + +/** + * struct dvb_usb_device_properties - properties of a dvb-usb-device + * @usb_ctrl: which USB device-side controller is in use. Needed for firmware + * download. + * @firmware: name of the firmware file. + * @download_firmware: called to download the firmware when the usb_ctrl is + * DEVICE_SPECIFIC. + * @no_reconnect: device doesn't do a reconnect after downloading the firmware, + * so do the warm initialization right after it + * + * @size_of_priv: how many bytes shall be allocated for the private field + * of struct dvb_usb_device. + * + * @power_ctrl: called to enable/disable power of the device. + * @read_mac_address: called to read the MAC address of the device. + * @identify_state: called to determine the state (cold or warm), when it + * is not distinguishable by the USB IDs. + * + * @rc: remote controller properties + * + * @i2c_algo: i2c_algorithm if the device has I2CoverUSB. + * + * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic + * endpoint which received control messages with bulk transfers. When this + * is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write- + * helper functions. + * + * @generic_bulk_ctrl_endpoint_response: some DVB USB devices use a separate + * endpoint for responses to control messages sent with bulk transfers via + * the generic_bulk_ctrl_endpoint. When this is non-zero, this will be used + * instead of the generic_bulk_ctrl_endpoint when reading usb responses in + * the dvb_usb_generic_rw helper function. + * + * @num_device_descs: number of struct dvb_usb_device_description in @devices + * @devices: array of struct dvb_usb_device_description compatibles with these + * properties. + */ +#define MAX_NO_OF_ADAPTER_PER_DEVICE 2 +struct dvb_usb_device_properties { + +#define DVB_USB_IS_AN_I2C_ADAPTER 0x01 + int caps; + +#define DEVICE_SPECIFIC 0 +#define CYPRESS_AN2135 1 +#define CYPRESS_AN2235 2 +#define CYPRESS_FX2 3 + int usb_ctrl; + int (*download_firmware) (struct usb_device *, const struct firmware *); + const char *firmware; + int no_reconnect; + + int size_of_priv; + + int num_adapters; + struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; + + int (*power_ctrl) (struct dvb_usb_device *, int); + int (*read_mac_address) (struct dvb_usb_device *, u8 []); + int (*identify_state) (struct usb_device *, struct dvb_usb_device_properties *, + struct dvb_usb_device_description **, int *); + + struct { + enum dvb_usb_mode mode; /* Drivers shouldn't touch on it */ + struct dvb_rc_legacy legacy; + struct dvb_rc core; + } rc; + + struct i2c_algorithm *i2c_algo; + + int generic_bulk_ctrl_endpoint; + int generic_bulk_ctrl_endpoint_response; + + int num_device_descs; + struct dvb_usb_device_description devices[12]; +}; + +/** + * struct usb_data_stream - generic object of an USB stream + * @buf_num: number of buffer allocated. + * @buf_size: size of each buffer in buf_list. + * @buf_list: array containing all allocate buffers for streaming. + * @dma_addr: list of dma_addr_t for each buffer in buf_list. + * + * @urbs_initialized: number of URBs initialized. + * @urbs_submitted: number of URBs submitted. + */ +#define MAX_NO_URBS_FOR_DATA_STREAM 10 +struct usb_data_stream { + struct usb_device *udev; + struct usb_data_stream_properties props; + +#define USB_STATE_INIT 0x00 +#define USB_STATE_URB_BUF 0x01 + int state; + + void (*complete) (struct usb_data_stream *, u8 *, size_t); + + struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM]; + int buf_num; + unsigned long buf_size; + u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM]; + dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM]; + + int urbs_initialized; + int urbs_submitted; + + void *user_priv; +}; + +/** + * struct dvb_usb_adapter - a DVB adapter on a USB device + * @id: index of this adapter (starting with 0). + * + * @feedcount: number of reqested feeds (used for streaming-activation) + * @pid_filtering: is hardware pid_filtering used or not. + * + * @pll_addr: I2C address of the tuner for programming + * @pll_init: array containing the initialization buffer + * @pll_desc: pointer to the appropriate struct dvb_pll_desc + * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or the board + * + * @dvb_adap: device's dvb_adapter. + * @dmxdev: device's dmxdev. + * @demux: device's software demuxer. + * @dvb_net: device's dvb_net interfaces. + * @dvb_frontend: device's frontend. + * @max_feed_count: how many feeds can be handled simultaneously by this + * device + * + * @fe_init: rerouted frontend-init (wakeup) function. + * @fe_sleep: rerouted frontend-sleep function. + * + * @stream: the usb data stream. + */ +struct dvb_usb_fe_adapter { + struct dvb_frontend *fe; + + int (*fe_init) (struct dvb_frontend *); + int (*fe_sleep) (struct dvb_frontend *); + + struct usb_data_stream stream; + + int pid_filtering; + int max_feed_count; + + void *priv; +}; + +struct dvb_usb_adapter { + struct dvb_usb_device *dev; + struct dvb_usb_adapter_properties props; + +#define DVB_USB_ADAP_STATE_INIT 0x000 +#define DVB_USB_ADAP_STATE_DVB 0x001 + int state; + + u8 id; + + int feedcount; + + /* dvb */ + struct dvb_adapter dvb_adap; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvb_net; + + struct dvb_usb_fe_adapter fe_adap[MAX_NO_OF_FE_PER_ADAP]; + int active_fe; + int num_frontends_initialized; + + void *priv; +}; + +/** + * struct dvb_usb_device - object of a DVB USB device + * @props: copy of the struct dvb_usb_properties this device belongs to. + * @desc: pointer to the device's struct dvb_usb_device_description. + * @state: initialization and runtime state of the device. + * + * @powered: indicated whether the device is power or not. + * Powered is in/decremented for each call to modify the state. + * @udev: pointer to the device's struct usb_device. + * + * @usb_mutex: semaphore of USB control messages (reading needs two messages) + * @i2c_mutex: semaphore for i2c-transfers + * + * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB + * + * @rc_dev: rc device for the remote control (rc-core mode) + * @input_dev: input device for the remote control (legacy mode) + * @rc_query_work: struct work_struct frequent rc queries + * @last_event: last triggered event + * @last_state: last state (no, pressed, repeat) + * @owner: owner of the dvb_adapter + * @priv: private data of the actual driver (allocate by dvb-usb, size defined + * in size_of_priv of dvb_usb_properties). + */ +struct dvb_usb_device { + struct dvb_usb_device_properties props; + struct dvb_usb_device_description *desc; + + struct usb_device *udev; + +#define DVB_USB_STATE_INIT 0x000 +#define DVB_USB_STATE_I2C 0x001 +#define DVB_USB_STATE_DVB 0x002 +#define DVB_USB_STATE_REMOTE 0x004 + int state; + + int powered; + + /* locking */ + struct mutex usb_mutex; + + /* i2c */ + struct mutex i2c_mutex; + struct i2c_adapter i2c_adap; + + int num_adapters_initialized; + struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; + + /* remote control */ + struct rc_dev *rc_dev; + struct input_dev *input_dev; + char rc_phys[64]; + struct delayed_work rc_query_work; + u32 last_event; + int last_state; + + struct module *owner; + + void *priv; +}; + +extern int dvb_usb_device_init(struct usb_interface *, + struct dvb_usb_device_properties *, + struct module *, struct dvb_usb_device **, + short *adapter_nums); +extern void dvb_usb_device_exit(struct usb_interface *); + +/* the generic read/write method for device control */ +extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int); +extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16); + +/* commonly used remote control parsing */ +extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *); + +/* commonly used firmware download types and function */ +struct hexline { + u8 len; + u32 addr; + u8 type; + u8 data[255]; + u8 chk; +}; +extern int usb_cypress_load_firmware(struct usb_device *udev, const struct firmware *fw, int type); +extern int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, int *pos); + + +#endif diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c new file mode 100644 index 000000000000..9382895b1b88 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -0,0 +1,1951 @@ +/* DVB USB framework compliant Linux driver for the + * DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101, + * TeVii S600, S630, S650, S660, S480, + * Prof 1100, 7500, + * Geniatech SU3000 Cards + * Copyright (C) 2008-2011 Igor M. Liplianin (liplianin@me.by) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dw2102.h" +#include "si21xx.h" +#include "stv0299.h" +#include "z0194a.h" +#include "stv0288.h" +#include "stb6000.h" +#include "eds1547.h" +#include "cx24116.h" +#include "tda1002x.h" +#include "mt312.h" +#include "zl10039.h" +#include "ds3000.h" +#include "stv0900.h" +#include "stv6110.h" +#include "stb6100.h" +#include "stb6100_proc.h" + +#ifndef USB_PID_DW2102 +#define USB_PID_DW2102 0x2102 +#endif + +#ifndef USB_PID_DW2104 +#define USB_PID_DW2104 0x2104 +#endif + +#ifndef USB_PID_DW3101 +#define USB_PID_DW3101 0x3101 +#endif + +#ifndef USB_PID_CINERGY_S +#define USB_PID_CINERGY_S 0x0064 +#endif + +#ifndef USB_PID_TEVII_S630 +#define USB_PID_TEVII_S630 0xd630 +#endif + +#ifndef USB_PID_TEVII_S650 +#define USB_PID_TEVII_S650 0xd650 +#endif + +#ifndef USB_PID_TEVII_S660 +#define USB_PID_TEVII_S660 0xd660 +#endif + +#ifndef USB_PID_TEVII_S480_1 +#define USB_PID_TEVII_S480_1 0xd481 +#endif + +#ifndef USB_PID_TEVII_S480_2 +#define USB_PID_TEVII_S480_2 0xd482 +#endif + +#ifndef USB_PID_PROF_1100 +#define USB_PID_PROF_1100 0xb012 +#endif + +#define DW210X_READ_MSG 0 +#define DW210X_WRITE_MSG 1 + +#define REG_1F_SYMBOLRATE_BYTE0 0x1f +#define REG_20_SYMBOLRATE_BYTE1 0x20 +#define REG_21_SYMBOLRATE_BYTE2 0x21 +/* on my own*/ +#define DW2102_VOLTAGE_CTRL (0x1800) +#define SU3000_STREAM_CTRL (0x1900) +#define DW2102_RC_QUERY (0x1a00) +#define DW2102_LED_CTRL (0x1b00) + +#define err_str "did not find the firmware file. (%s) " \ + "Please see linux/Documentation/dvb/ for more details " \ + "on firmware-problems." + +struct rc_map_dvb_usb_table_table { + struct rc_map_table *rc_keys; + int rc_keys_size; +}; + +struct su3000_state { + u8 initialized; +}; + +struct s6x0_state { + int (*old_set_voltage)(struct dvb_frontend *f, fe_sec_voltage_t v); +}; + +/* debug */ +static int dvb_usb_dw2102_debug; +module_param_named(debug, dvb_usb_dw2102_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info 2=xfer 4=rc(or-able))." + DVB_USB_DEBUG_STATUS); + +/* keymaps */ +static int ir_keymap; +module_param_named(keymap, ir_keymap, int, 0644); +MODULE_PARM_DESC(keymap, "set keymap 0=default 1=dvbworld 2=tevii 3=tbs ..." + " 256=none"); + +/* demod probe */ +static int demod_probe = 1; +module_param_named(demod, demod_probe, int, 0644); +MODULE_PARM_DESC(demod, "demod to probe (1=cx24116 2=stv0903+stv6110 " + "4=stv0903+stb6100(or-able))."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int dw210x_op_rw(struct usb_device *dev, u8 request, u16 value, + u16 index, u8 * data, u16 len, int flags) +{ + int ret; + u8 *u8buf; + unsigned int pipe = (flags == DW210X_READ_MSG) ? + usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0); + u8 request_type = (flags == DW210X_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; + + u8buf = kmalloc(len, GFP_KERNEL); + if (!u8buf) + return -ENOMEM; + + + if (flags == DW210X_WRITE_MSG) + memcpy(u8buf, data, len); + ret = usb_control_msg(dev, pipe, request, request_type | USB_TYPE_VENDOR, + value, index , u8buf, len, 2000); + + if (flags == DW210X_READ_MSG) + memcpy(data, u8buf, len); + + kfree(u8buf); + return ret; +} + +/* I2C */ +static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i = 0; + u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0}; + u16 value; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: + /* read stv0299 register */ + value = msg[0].buf[0];/* register */ + for (i = 0; i < msg[1].len; i++) { + dw210x_op_rw(d->udev, 0xb5, value + i, 0, + buf6, 2, DW210X_READ_MSG); + msg[1].buf[i] = buf6[0]; + } + break; + case 1: + switch (msg[0].addr) { + case 0x68: + /* write to stv0299 register */ + buf6[0] = 0x2a; + buf6[1] = msg[0].buf[0]; + buf6[2] = msg[0].buf[1]; + dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 3, DW210X_WRITE_MSG); + break; + case 0x60: + if (msg[0].flags == 0) { + /* write to tuner pll */ + buf6[0] = 0x2c; + buf6[1] = 5; + buf6[2] = 0xc0; + buf6[3] = msg[0].buf[0]; + buf6[4] = msg[0].buf[1]; + buf6[5] = msg[0].buf[2]; + buf6[6] = msg[0].buf[3]; + dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 7, DW210X_WRITE_MSG); + } else { + /* read from tuner */ + dw210x_op_rw(d->udev, 0xb5, 0, 0, + buf6, 1, DW210X_READ_MSG); + msg[0].buf[0] = buf6[0]; + } + break; + case (DW2102_RC_QUERY): + dw210x_op_rw(d->udev, 0xb8, 0, 0, + buf6, 2, DW210X_READ_MSG); + msg[0].buf[0] = buf6[0]; + msg[0].buf[1] = buf6[1]; + break; + case (DW2102_VOLTAGE_CTRL): + buf6[0] = 0x30; + buf6[1] = msg[0].buf[0]; + dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 2, DW210X_WRITE_MSG); + break; + } + + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static int dw2102_serit_i2c_transfer(struct i2c_adapter *adap, + struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + u8 buf6[] = {0, 0, 0, 0, 0, 0, 0}; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: + /* read si2109 register by number */ + buf6[0] = msg[0].addr << 1; + buf6[1] = msg[0].len; + buf6[2] = msg[0].buf[0]; + dw210x_op_rw(d->udev, 0xc2, 0, 0, + buf6, msg[0].len + 2, DW210X_WRITE_MSG); + /* read si2109 register */ + dw210x_op_rw(d->udev, 0xc3, 0xd0, 0, + buf6, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, buf6 + 2, msg[1].len); + + break; + case 1: + switch (msg[0].addr) { + case 0x68: + /* write to si2109 register */ + buf6[0] = msg[0].addr << 1; + buf6[1] = msg[0].len; + memcpy(buf6 + 2, msg[0].buf, msg[0].len); + dw210x_op_rw(d->udev, 0xc2, 0, 0, buf6, + msg[0].len + 2, DW210X_WRITE_MSG); + break; + case(DW2102_RC_QUERY): + dw210x_op_rw(d->udev, 0xb8, 0, 0, + buf6, 2, DW210X_READ_MSG); + msg[0].buf[0] = buf6[0]; + msg[0].buf[1] = buf6[1]; + break; + case(DW2102_VOLTAGE_CTRL): + buf6[0] = 0x30; + buf6[1] = msg[0].buf[0]; + dw210x_op_rw(d->udev, 0xb2, 0, 0, + buf6, 2, DW210X_WRITE_MSG); + break; + } + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static int dw2102_earda_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: { + /* read */ + /* first write first register number */ + u8 ibuf[msg[1].len + 2], obuf[3]; + obuf[0] = msg[0].addr << 1; + obuf[1] = msg[0].len; + obuf[2] = msg[0].buf[0]; + dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + /* second read registers */ + dw210x_op_rw(d->udev, 0xc3, 0xd1 , 0, + ibuf, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, ibuf + 2, msg[1].len); + + break; + } + case 1: + switch (msg[0].addr) { + case 0x68: { + /* write to register */ + u8 obuf[msg[0].len + 2]; + obuf[0] = msg[0].addr << 1; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + break; + } + case 0x61: { + /* write to tuner */ + u8 obuf[msg[0].len + 2]; + obuf[0] = msg[0].addr << 1; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + break; + } + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); + memcpy(msg[0].buf, ibuf , 2); + break; + } + case(DW2102_VOLTAGE_CTRL): { + u8 obuf[2]; + obuf[0] = 0x30; + obuf[1] = msg[0].buf[0]; + dw210x_op_rw(d->udev, 0xb2, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + break; + } + } + + break; + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static int dw2104_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int len, i, j; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (j = 0; j < num; j++) { + switch (msg[j].addr) { + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); + memcpy(msg[j].buf, ibuf , 2); + break; + } + case(DW2102_VOLTAGE_CTRL): { + u8 obuf[2]; + obuf[0] = 0x30; + obuf[1] = msg[j].buf[0]; + dw210x_op_rw(d->udev, 0xb2, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + break; + } + /*case 0x55: cx24116 + case 0x6a: stv0903 + case 0x68: ds3000, stv0903 + case 0x60: ts2020, stv6110, stb6100 */ + default: { + if (msg[j].flags == I2C_M_RD) { + /* read registers */ + u8 ibuf[msg[j].len + 2]; + dw210x_op_rw(d->udev, 0xc3, + (msg[j].addr << 1) + 1, 0, + ibuf, msg[j].len + 2, + DW210X_READ_MSG); + memcpy(msg[j].buf, ibuf + 2, msg[j].len); + mdelay(10); + } else if (((msg[j].buf[0] == 0xb0) && + (msg[j].addr == 0x68)) || + ((msg[j].buf[0] == 0xf7) && + (msg[j].addr == 0x55))) { + /* write firmware */ + u8 obuf[19]; + obuf[0] = msg[j].addr << 1; + obuf[1] = (msg[j].len > 15 ? 17 : msg[j].len); + obuf[2] = msg[j].buf[0]; + len = msg[j].len - 1; + i = 1; + do { + memcpy(obuf + 3, msg[j].buf + i, + (len > 16 ? 16 : len)); + dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, (len > 16 ? 16 : len) + 3, + DW210X_WRITE_MSG); + i += 16; + len -= 16; + } while (len > 0); + } else { + /* write registers */ + u8 obuf[msg[j].len + 2]; + obuf[0] = msg[j].addr << 1; + obuf[1] = msg[j].len; + memcpy(obuf + 2, msg[j].buf, msg[j].len); + dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[j].len + 2, + DW210X_WRITE_MSG); + } + break; + } + } + + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static int dw3101_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 2: { + /* read */ + /* first write first register number */ + u8 ibuf[msg[1].len + 2], obuf[3]; + obuf[0] = msg[0].addr << 1; + obuf[1] = msg[0].len; + obuf[2] = msg[0].buf[0]; + dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + /* second read registers */ + dw210x_op_rw(d->udev, 0xc3, 0x19 , 0, + ibuf, msg[1].len + 2, DW210X_READ_MSG); + memcpy(msg[1].buf, ibuf + 2, msg[1].len); + + break; + } + case 1: + switch (msg[0].addr) { + case 0x60: + case 0x0c: { + /* write to register */ + u8 obuf[msg[0].len + 2]; + obuf[0] = msg[0].addr << 1; + obuf[1] = msg[0].len; + memcpy(obuf + 2, msg[0].buf, msg[0].len); + dw210x_op_rw(d->udev, 0xc2, 0, 0, + obuf, msg[0].len + 2, DW210X_WRITE_MSG); + break; + } + case(DW2102_RC_QUERY): { + u8 ibuf[2]; + dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 2, DW210X_READ_MSG); + memcpy(msg[0].buf, ibuf , 2); + break; + } + } + + break; + } + + for (i = 0; i < num; i++) { + deb_xfer("%02x:%02x: %s ", i, msg[i].addr, + msg[i].flags == 0 ? ">>>" : "<<<"); + debug_dump(msg[i].buf, msg[i].len, deb_xfer); + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct usb_device *udev; + int len, i, j; + + if (!d) + return -ENODEV; + udev = d->udev; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (j = 0; j < num; j++) { + switch (msg[j].addr) { + case (DW2102_RC_QUERY): { + u8 ibuf[5]; + dw210x_op_rw(d->udev, 0xb8, 0, 0, + ibuf, 5, DW210X_READ_MSG); + memcpy(msg[j].buf, ibuf + 3, 2); + break; + } + case (DW2102_VOLTAGE_CTRL): { + u8 obuf[2]; + + obuf[0] = 1; + obuf[1] = msg[j].buf[1];/* off-on */ + dw210x_op_rw(d->udev, 0x8a, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + obuf[0] = 3; + obuf[1] = msg[j].buf[0];/* 13v-18v */ + dw210x_op_rw(d->udev, 0x8a, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + break; + } + case (DW2102_LED_CTRL): { + u8 obuf[2]; + + obuf[0] = 5; + obuf[1] = msg[j].buf[0]; + dw210x_op_rw(d->udev, 0x8a, 0, 0, + obuf, 2, DW210X_WRITE_MSG); + break; + } + /*case 0x55: cx24116 + case 0x6a: stv0903 + case 0x68: ds3000, stv0903 + case 0x60: ts2020, stv6110, stb6100 + case 0xa0: eeprom */ + default: { + if (msg[j].flags == I2C_M_RD) { + /* read registers */ + u8 ibuf[msg[j].len]; + dw210x_op_rw(d->udev, 0x91, 0, 0, + ibuf, msg[j].len, + DW210X_READ_MSG); + memcpy(msg[j].buf, ibuf, msg[j].len); + break; + } else if ((msg[j].buf[0] == 0xb0) && + (msg[j].addr == 0x68)) { + /* write firmware */ + u8 obuf[19]; + obuf[0] = (msg[j].len > 16 ? + 18 : msg[j].len + 1); + obuf[1] = msg[j].addr << 1; + obuf[2] = msg[j].buf[0]; + len = msg[j].len - 1; + i = 1; + do { + memcpy(obuf + 3, msg[j].buf + i, + (len > 16 ? 16 : len)); + dw210x_op_rw(d->udev, 0x80, 0, 0, + obuf, (len > 16 ? 16 : len) + 3, + DW210X_WRITE_MSG); + i += 16; + len -= 16; + } while (len > 0); + } else if (j < (num - 1)) { + /* write register addr before read */ + u8 obuf[msg[j].len + 2]; + obuf[0] = msg[j + 1].len; + obuf[1] = (msg[j].addr << 1); + memcpy(obuf + 2, msg[j].buf, msg[j].len); + dw210x_op_rw(d->udev, + udev->descriptor.idProduct == + 0x7500 ? 0x92 : 0x90, 0, 0, + obuf, msg[j].len + 2, + DW210X_WRITE_MSG); + break; + } else { + /* write registers */ + u8 obuf[msg[j].len + 2]; + obuf[0] = msg[j].len + 1; + obuf[1] = (msg[j].addr << 1); + memcpy(obuf + 2, msg[j].buf, msg[j].len); + dw210x_op_rw(d->udev, 0x80, 0, 0, + obuf, msg[j].len + 2, + DW210X_WRITE_MSG); + break; + } + break; + } + } + } + + mutex_unlock(&d->i2c_mutex); + return num; +} + +static int su3000_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + u8 obuf[0x40], ibuf[0x40]; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + switch (num) { + case 1: + switch (msg[0].addr) { + case SU3000_STREAM_CTRL: + obuf[0] = msg[0].buf[0] + 0x36; + obuf[1] = 3; + obuf[2] = 0; + if (dvb_usb_generic_rw(d, obuf, 3, ibuf, 0, 0) < 0) + err("i2c transfer failed."); + break; + case DW2102_RC_QUERY: + obuf[0] = 0x10; + if (dvb_usb_generic_rw(d, obuf, 1, ibuf, 2, 0) < 0) + err("i2c transfer failed."); + msg[0].buf[1] = ibuf[0]; + msg[0].buf[0] = ibuf[1]; + break; + default: + /* always i2c write*/ + obuf[0] = 0x08; + obuf[1] = msg[0].addr; + obuf[2] = msg[0].len; + + memcpy(&obuf[3], msg[0].buf, msg[0].len); + + if (dvb_usb_generic_rw(d, obuf, msg[0].len + 3, + ibuf, 1, 0) < 0) + err("i2c transfer failed."); + + } + break; + case 2: + /* always i2c read */ + obuf[0] = 0x09; + obuf[1] = msg[0].len; + obuf[2] = msg[1].len; + obuf[3] = msg[0].addr; + memcpy(&obuf[4], msg[0].buf, msg[0].len); + + if (dvb_usb_generic_rw(d, obuf, msg[0].len + 4, + ibuf, msg[1].len + 1, 0) < 0) + err("i2c transfer failed."); + + memcpy(msg[1].buf, &ibuf[1], msg[1].len); + break; + default: + warn("more than 2 i2c messages at a time is not handled yet."); + break; + } + mutex_unlock(&d->i2c_mutex); + return num; +} + +static u32 dw210x_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm dw2102_i2c_algo = { + .master_xfer = dw2102_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm dw2102_serit_i2c_algo = { + .master_xfer = dw2102_serit_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm dw2102_earda_i2c_algo = { + .master_xfer = dw2102_earda_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm dw2104_i2c_algo = { + .master_xfer = dw2104_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm dw3101_i2c_algo = { + .master_xfer = dw3101_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm s6x0_i2c_algo = { + .master_xfer = s6x0_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static struct i2c_algorithm su3000_i2c_algo = { + .master_xfer = su3000_i2c_transfer, + .functionality = dw210x_i2c_func, +}; + +static int dw210x_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + int i; + u8 ibuf[] = {0, 0}; + u8 eeprom[256], eepromline[16]; + + for (i = 0; i < 256; i++) { + if (dw210x_op_rw(d->udev, 0xb6, 0xa0 , i, ibuf, 2, DW210X_READ_MSG) < 0) { + err("read eeprom failed."); + return -1; + } else { + eepromline[i%16] = ibuf[0]; + eeprom[i] = ibuf[0]; + } + if ((i % 16) == 15) { + deb_xfer("%02x: ", i - 15); + debug_dump(eepromline, 16, deb_xfer); + } + } + + memcpy(mac, eeprom + 8, 6); + return 0; +}; + +static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + int i, ret; + u8 ibuf[] = { 0 }, obuf[] = { 0 }; + u8 eeprom[256], eepromline[16]; + struct i2c_msg msg[] = { + { + .addr = 0xa0 >> 1, + .flags = 0, + .buf = obuf, + .len = 1, + }, { + .addr = 0xa0 >> 1, + .flags = I2C_M_RD, + .buf = ibuf, + .len = 1, + } + }; + + for (i = 0; i < 256; i++) { + obuf[0] = i; + ret = s6x0_i2c_transfer(&d->i2c_adap, msg, 2); + if (ret != 2) { + err("read eeprom failed."); + return -1; + } else { + eepromline[i % 16] = ibuf[0]; + eeprom[i] = ibuf[0]; + } + + if ((i % 16) == 15) { + deb_xfer("%02x: ", i - 15); + debug_dump(eepromline, 16, deb_xfer); + } + } + + memcpy(mac, eeprom + 16, 6); + return 0; +}; + +static int su3000_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + static u8 command_start[] = {0x00}; + static u8 command_stop[] = {0x01}; + struct i2c_msg msg = { + .addr = SU3000_STREAM_CTRL, + .flags = 0, + .buf = onoff ? command_start : command_stop, + .len = 1 + }; + + i2c_transfer(&adap->dev->i2c_adap, &msg, 1); + + return 0; +} + +static int su3000_power_ctrl(struct dvb_usb_device *d, int i) +{ + struct su3000_state *state = (struct su3000_state *)d->priv; + u8 obuf[] = {0xde, 0}; + + info("%s: %d, initialized %d\n", __func__, i, state->initialized); + + if (i && !state->initialized) { + state->initialized = 1; + /* reset board */ + dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); + } + + return 0; +} + +static int su3000_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + int i; + u8 obuf[] = { 0x1f, 0xf0 }; + u8 ibuf[] = { 0 }; + struct i2c_msg msg[] = { + { + .addr = 0x51, + .flags = 0, + .buf = obuf, + .len = 2, + }, { + .addr = 0x51, + .flags = I2C_M_RD, + .buf = ibuf, + .len = 1, + + } + }; + + for (i = 0; i < 6; i++) { + obuf[1] = 0xf0 + i; + if (i2c_transfer(&d->i2c_adap, msg, 2) != 2) + break; + else + mac[i] = ibuf[0]; + + debug_dump(mac, 6, printk); + } + + return 0; +} + +static int su3000_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + info("%s\n", __func__); + + *cold = 0; + return 0; +} + +static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + static u8 command_13v[] = {0x00, 0x01}; + static u8 command_18v[] = {0x01, 0x01}; + static u8 command_off[] = {0x00, 0x00}; + struct i2c_msg msg = { + .addr = DW2102_VOLTAGE_CTRL, + .flags = 0, + .buf = command_off, + .len = 2, + }; + + struct dvb_usb_adapter *udev_adap = + (struct dvb_usb_adapter *)(fe->dvb->priv); + if (voltage == SEC_VOLTAGE_18) + msg.buf = command_18v; + else if (voltage == SEC_VOLTAGE_13) + msg.buf = command_13v; + + i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1); + + return 0; +} + +static int s660_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct dvb_usb_adapter *d = + (struct dvb_usb_adapter *)(fe->dvb->priv); + struct s6x0_state *st = (struct s6x0_state *)d->dev->priv; + + dw210x_set_voltage(fe, voltage); + if (st->old_set_voltage) + st->old_set_voltage(fe, voltage); + + return 0; +} + +static void dw210x_led_ctrl(struct dvb_frontend *fe, int offon) +{ + static u8 led_off[] = { 0 }; + static u8 led_on[] = { 1 }; + struct i2c_msg msg = { + .addr = DW2102_LED_CTRL, + .flags = 0, + .buf = led_off, + .len = 1 + }; + struct dvb_usb_adapter *udev_adap = + (struct dvb_usb_adapter *)(fe->dvb->priv); + + if (offon) + msg.buf = led_on; + i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1); +} + +static struct stv0299_config sharp_z0194a_config = { + .demod_address = 0x68, + .inittab = sharp_z0194a_inittab, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_1, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = sharp_z0194a_set_symbol_rate, +}; + +static struct cx24116_config dw2104_config = { + .demod_address = 0x55, + .mpg_clk_pos_pol = 0x01, +}; + +static struct si21xx_config serit_sp1511lhb_config = { + .demod_address = 0x68, + .min_delay_ms = 100, + +}; + +static struct tda10023_config dw3101_tda10023_config = { + .demod_address = 0x0c, + .invert = 1, +}; + +static struct mt312_config zl313_config = { + .demod_address = 0x0e, +}; + +static struct ds3000_config dw2104_ds3000_config = { + .demod_address = 0x68, +}; + +static struct stv0900_config dw2104a_stv0900_config = { + .demod_address = 0x6a, + .demod_mode = 0, + .xtal = 27000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .tun1_maddress = 0,/* 0x60 */ + .tun1_adc = 0,/* 2 Vpp */ + .path1_mode = 3, +}; + +static struct stb6100_config dw2104a_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static struct stv0900_config dw2104_stv0900_config = { + .demod_address = 0x68, + .demod_mode = 0, + .xtal = 8000000, + .clkmode = 3, + .diseqc_mode = 2, + .tun1_maddress = 0, + .tun1_adc = 1,/* 1 Vpp */ + .path1_mode = 3, +}; + +static struct stv6110_config dw2104_stv6110_config = { + .i2c_address = 0x60, + .mclk = 16000000, + .clk_div = 1, +}; + +static struct stv0900_config prof_7500_stv0900_config = { + .demod_address = 0x6a, + .demod_mode = 0, + .xtal = 27000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .tun1_maddress = 0,/* 0x60 */ + .tun1_adc = 0,/* 2 Vpp */ + .path1_mode = 3, + .tun1_type = 3, + .set_lock_led = dw210x_led_ctrl, +}; + +static struct ds3000_config su3000_ds3000_config = { + .demod_address = 0x68, + .ci_mode = 1, +}; + +static int dw2104_frontend_attach(struct dvb_usb_adapter *d) +{ + struct dvb_tuner_ops *tuner_ops = NULL; + + if (demod_probe & 4) { + d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104a_stv0900_config, + &d->dev->i2c_adap, 0); + if (d->fe_adap[0].fe != NULL) { + if (dvb_attach(stb6100_attach, d->fe_adap[0].fe, + &dw2104a_stb6100_config, + &d->dev->i2c_adap)) { + tuner_ops = &d->fe_adap[0].fe->ops.tuner_ops; + tuner_ops->set_frequency = stb6100_set_freq; + tuner_ops->get_frequency = stb6100_get_freq; + tuner_ops->set_bandwidth = stb6100_set_bandw; + tuner_ops->get_bandwidth = stb6100_get_bandw; + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached STV0900+STB6100!\n"); + return 0; + } + } + } + + if (demod_probe & 2) { + d->fe_adap[0].fe = dvb_attach(stv0900_attach, &dw2104_stv0900_config, + &d->dev->i2c_adap, 0); + if (d->fe_adap[0].fe != NULL) { + if (dvb_attach(stv6110_attach, d->fe_adap[0].fe, + &dw2104_stv6110_config, + &d->dev->i2c_adap)) { + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached STV0900+STV6110A!\n"); + return 0; + } + } + } + + if (demod_probe & 1) { + d->fe_adap[0].fe = dvb_attach(cx24116_attach, &dw2104_config, + &d->dev->i2c_adap); + if (d->fe_adap[0].fe != NULL) { + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached cx24116!\n"); + return 0; + } + } + + d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config, + &d->dev->i2c_adap); + if (d->fe_adap[0].fe != NULL) { + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached DS3000!\n"); + return 0; + } + + return -EIO; +} + +static struct dvb_usb_device_properties dw2102_properties; +static struct dvb_usb_device_properties dw2104_properties; +static struct dvb_usb_device_properties s6x0_properties; + +static int dw2102_frontend_attach(struct dvb_usb_adapter *d) +{ + if (dw2102_properties.i2c_algo == &dw2102_serit_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = NULL;*/ + d->fe_adap[0].fe = dvb_attach(si21xx_attach, &serit_sp1511lhb_config, + &d->dev->i2c_adap); + if (d->fe_adap[0].fe != NULL) { + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached si21xx!\n"); + return 0; + } + } + + if (dw2102_properties.i2c_algo == &dw2102_earda_i2c_algo) { + d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config, + &d->dev->i2c_adap); + if (d->fe_adap[0].fe != NULL) { + if (dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, + &d->dev->i2c_adap)) { + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached stv0288!\n"); + return 0; + } + } + } + + if (dw2102_properties.i2c_algo == &dw2102_i2c_algo) { + /*dw2102_properties.adapter->tuner_attach = dw2102_tuner_attach;*/ + d->fe_adap[0].fe = dvb_attach(stv0299_attach, &sharp_z0194a_config, + &d->dev->i2c_adap); + if (d->fe_adap[0].fe != NULL) { + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached stv0299!\n"); + return 0; + } + } + return -EIO; +} + +static int dw3101_frontend_attach(struct dvb_usb_adapter *d) +{ + d->fe_adap[0].fe = dvb_attach(tda10023_attach, &dw3101_tda10023_config, + &d->dev->i2c_adap, 0x48); + if (d->fe_adap[0].fe != NULL) { + info("Attached tda10023!\n"); + return 0; + } + return -EIO; +} + +static int zl100313_frontend_attach(struct dvb_usb_adapter *d) +{ + d->fe_adap[0].fe = dvb_attach(mt312_attach, &zl313_config, + &d->dev->i2c_adap); + if (d->fe_adap[0].fe != NULL) { + if (dvb_attach(zl10039_attach, d->fe_adap[0].fe, 0x60, + &d->dev->i2c_adap)) { + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + info("Attached zl100313+zl10039!\n"); + return 0; + } + } + + return -EIO; +} + +static int stv0288_frontend_attach(struct dvb_usb_adapter *d) +{ + u8 obuf[] = {7, 1}; + + d->fe_adap[0].fe = dvb_attach(stv0288_attach, &earda_config, + &d->dev->i2c_adap); + + if (d->fe_adap[0].fe == NULL) + return -EIO; + + if (NULL == dvb_attach(stb6000_attach, d->fe_adap[0].fe, 0x61, &d->dev->i2c_adap)) + return -EIO; + + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + + dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); + + info("Attached stv0288+stb6000!\n"); + + return 0; + +} + +static int ds3000_frontend_attach(struct dvb_usb_adapter *d) +{ + struct s6x0_state *st = (struct s6x0_state *)d->dev->priv; + u8 obuf[] = {7, 1}; + + d->fe_adap[0].fe = dvb_attach(ds3000_attach, &dw2104_ds3000_config, + &d->dev->i2c_adap); + + if (d->fe_adap[0].fe == NULL) + return -EIO; + + st->old_set_voltage = d->fe_adap[0].fe->ops.set_voltage; + d->fe_adap[0].fe->ops.set_voltage = s660_set_voltage; + + dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); + + info("Attached ds3000+ds2020!\n"); + + return 0; +} + +static int prof_7500_frontend_attach(struct dvb_usb_adapter *d) +{ + u8 obuf[] = {7, 1}; + + d->fe_adap[0].fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config, + &d->dev->i2c_adap, 0); + if (d->fe_adap[0].fe == NULL) + return -EIO; + + d->fe_adap[0].fe->ops.set_voltage = dw210x_set_voltage; + + dw210x_op_rw(d->dev->udev, 0x8a, 0, 0, obuf, 2, DW210X_WRITE_MSG); + + info("Attached STV0900+STB6100A!\n"); + + return 0; +} + +static int su3000_frontend_attach(struct dvb_usb_adapter *d) +{ + u8 obuf[3] = { 0xe, 0x80, 0 }; + u8 ibuf[] = { 0 }; + + if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + err("command 0x0e transfer failed."); + + obuf[0] = 0xe; + obuf[1] = 0x83; + obuf[2] = 0; + + if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + err("command 0x0e transfer failed."); + + obuf[0] = 0xe; + obuf[1] = 0x83; + obuf[2] = 1; + + if (dvb_usb_generic_rw(d->dev, obuf, 3, ibuf, 1, 0) < 0) + err("command 0x0e transfer failed."); + + obuf[0] = 0x51; + + if (dvb_usb_generic_rw(d->dev, obuf, 1, ibuf, 1, 0) < 0) + err("command 0x51 transfer failed."); + + d->fe_adap[0].fe = dvb_attach(ds3000_attach, &su3000_ds3000_config, + &d->dev->i2c_adap); + if (d->fe_adap[0].fe == NULL) + return -EIO; + + info("Attached DS3000!\n"); + + return 0; +} + +static int dw2102_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, + &adap->dev->i2c_adap, DVB_PLL_OPERA1); + return 0; +} + +static int dw3101_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x60, + &adap->dev->i2c_adap, DVB_PLL_TUA6034); + + return 0; +} + +static struct rc_map_table rc_map_dw210x_table[] = { + { 0xf80a, KEY_POWER2 }, /*power*/ + { 0xf80c, KEY_MUTE }, /*mute*/ + { 0xf811, KEY_1 }, + { 0xf812, KEY_2 }, + { 0xf813, KEY_3 }, + { 0xf814, KEY_4 }, + { 0xf815, KEY_5 }, + { 0xf816, KEY_6 }, + { 0xf817, KEY_7 }, + { 0xf818, KEY_8 }, + { 0xf819, KEY_9 }, + { 0xf810, KEY_0 }, + { 0xf81c, KEY_CHANNELUP }, /*ch+*/ + { 0xf80f, KEY_CHANNELDOWN }, /*ch-*/ + { 0xf81a, KEY_VOLUMEUP }, /*vol+*/ + { 0xf80e, KEY_VOLUMEDOWN }, /*vol-*/ + { 0xf804, KEY_RECORD }, /*rec*/ + { 0xf809, KEY_FAVORITES }, /*fav*/ + { 0xf808, KEY_REWIND }, /*rewind*/ + { 0xf807, KEY_FASTFORWARD }, /*fast*/ + { 0xf80b, KEY_PAUSE }, /*pause*/ + { 0xf802, KEY_ESC }, /*cancel*/ + { 0xf803, KEY_TAB }, /*tab*/ + { 0xf800, KEY_UP }, /*up*/ + { 0xf81f, KEY_OK }, /*ok*/ + { 0xf801, KEY_DOWN }, /*down*/ + { 0xf805, KEY_CAMERA }, /*cap*/ + { 0xf806, KEY_STOP }, /*stop*/ + { 0xf840, KEY_ZOOM }, /*full*/ + { 0xf81e, KEY_TV }, /*tvmode*/ + { 0xf81b, KEY_LAST }, /*recall*/ +}; + +static struct rc_map_table rc_map_tevii_table[] = { + { 0xf80a, KEY_POWER }, + { 0xf80c, KEY_MUTE }, + { 0xf811, KEY_1 }, + { 0xf812, KEY_2 }, + { 0xf813, KEY_3 }, + { 0xf814, KEY_4 }, + { 0xf815, KEY_5 }, + { 0xf816, KEY_6 }, + { 0xf817, KEY_7 }, + { 0xf818, KEY_8 }, + { 0xf819, KEY_9 }, + { 0xf810, KEY_0 }, + { 0xf81c, KEY_MENU }, + { 0xf80f, KEY_VOLUMEDOWN }, + { 0xf81a, KEY_LAST }, + { 0xf80e, KEY_OPEN }, + { 0xf804, KEY_RECORD }, + { 0xf809, KEY_VOLUMEUP }, + { 0xf808, KEY_CHANNELUP }, + { 0xf807, KEY_PVR }, + { 0xf80b, KEY_TIME }, + { 0xf802, KEY_RIGHT }, + { 0xf803, KEY_LEFT }, + { 0xf800, KEY_UP }, + { 0xf81f, KEY_OK }, + { 0xf801, KEY_DOWN }, + { 0xf805, KEY_TUNER }, + { 0xf806, KEY_CHANNELDOWN }, + { 0xf840, KEY_PLAYPAUSE }, + { 0xf81e, KEY_REWIND }, + { 0xf81b, KEY_FAVORITES }, + { 0xf81d, KEY_BACK }, + { 0xf84d, KEY_FASTFORWARD }, + { 0xf844, KEY_EPG }, + { 0xf84c, KEY_INFO }, + { 0xf841, KEY_AB }, + { 0xf843, KEY_AUDIO }, + { 0xf845, KEY_SUBTITLE }, + { 0xf84a, KEY_LIST }, + { 0xf846, KEY_F1 }, + { 0xf847, KEY_F2 }, + { 0xf85e, KEY_F3 }, + { 0xf85c, KEY_F4 }, + { 0xf852, KEY_F5 }, + { 0xf85a, KEY_F6 }, + { 0xf856, KEY_MODE }, + { 0xf858, KEY_SWITCHVIDEOMODE }, +}; + +static struct rc_map_table rc_map_tbs_table[] = { + { 0xf884, KEY_POWER }, + { 0xf894, KEY_MUTE }, + { 0xf887, KEY_1 }, + { 0xf886, KEY_2 }, + { 0xf885, KEY_3 }, + { 0xf88b, KEY_4 }, + { 0xf88a, KEY_5 }, + { 0xf889, KEY_6 }, + { 0xf88f, KEY_7 }, + { 0xf88e, KEY_8 }, + { 0xf88d, KEY_9 }, + { 0xf892, KEY_0 }, + { 0xf896, KEY_CHANNELUP }, + { 0xf891, KEY_CHANNELDOWN }, + { 0xf893, KEY_VOLUMEUP }, + { 0xf88c, KEY_VOLUMEDOWN }, + { 0xf883, KEY_RECORD }, + { 0xf898, KEY_PAUSE }, + { 0xf899, KEY_OK }, + { 0xf89a, KEY_SHUFFLE }, + { 0xf881, KEY_UP }, + { 0xf890, KEY_LEFT }, + { 0xf882, KEY_RIGHT }, + { 0xf888, KEY_DOWN }, + { 0xf895, KEY_FAVORITES }, + { 0xf897, KEY_SUBTITLE }, + { 0xf89d, KEY_ZOOM }, + { 0xf89f, KEY_EXIT }, + { 0xf89e, KEY_MENU }, + { 0xf89c, KEY_EPG }, + { 0xf880, KEY_PREVIOUS }, + { 0xf89b, KEY_MODE } +}; + +static struct rc_map_table rc_map_su3000_table[] = { + { 0x25, KEY_POWER }, /* right-bottom Red */ + { 0x0a, KEY_MUTE }, /* -/-- */ + { 0x01, KEY_1 }, + { 0x02, KEY_2 }, + { 0x03, KEY_3 }, + { 0x04, KEY_4 }, + { 0x05, KEY_5 }, + { 0x06, KEY_6 }, + { 0x07, KEY_7 }, + { 0x08, KEY_8 }, + { 0x09, KEY_9 }, + { 0x00, KEY_0 }, + { 0x20, KEY_UP }, /* CH+ */ + { 0x21, KEY_DOWN }, /* CH+ */ + { 0x12, KEY_VOLUMEUP }, /* Brightness Up */ + { 0x13, KEY_VOLUMEDOWN },/* Brightness Down */ + { 0x1f, KEY_RECORD }, + { 0x17, KEY_PLAY }, + { 0x16, KEY_PAUSE }, + { 0x0b, KEY_STOP }, + { 0x27, KEY_FASTFORWARD },/* >> */ + { 0x26, KEY_REWIND }, /* << */ + { 0x0d, KEY_OK }, /* Mute */ + { 0x11, KEY_LEFT }, /* VOL- */ + { 0x10, KEY_RIGHT }, /* VOL+ */ + { 0x29, KEY_BACK }, /* button under 9 */ + { 0x2c, KEY_MENU }, /* TTX */ + { 0x2b, KEY_EPG }, /* EPG */ + { 0x1e, KEY_RED }, /* OSD */ + { 0x0e, KEY_GREEN }, /* Window */ + { 0x2d, KEY_YELLOW }, /* button under << */ + { 0x0f, KEY_BLUE }, /* bottom yellow button */ + { 0x14, KEY_AUDIO }, /* Snapshot */ + { 0x38, KEY_TV }, /* TV/Radio */ + { 0x0c, KEY_ESC } /* upper Red button */ +}; + +static struct rc_map_dvb_usb_table_table keys_tables[] = { + { rc_map_dw210x_table, ARRAY_SIZE(rc_map_dw210x_table) }, + { rc_map_tevii_table, ARRAY_SIZE(rc_map_tevii_table) }, + { rc_map_tbs_table, ARRAY_SIZE(rc_map_tbs_table) }, + { rc_map_su3000_table, ARRAY_SIZE(rc_map_su3000_table) }, +}; + +static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table; + int keymap_size = d->props.rc.legacy.rc_map_size; + u8 key[2]; + struct i2c_msg msg = { + .addr = DW2102_RC_QUERY, + .flags = I2C_M_RD, + .buf = key, + .len = 2 + }; + int i; + /* override keymap */ + if ((ir_keymap > 0) && (ir_keymap <= ARRAY_SIZE(keys_tables))) { + keymap = keys_tables[ir_keymap - 1].rc_keys ; + keymap_size = keys_tables[ir_keymap - 1].rc_keys_size; + } else if (ir_keymap > ARRAY_SIZE(keys_tables)) + return 0; /* none */ + + *state = REMOTE_NO_KEY_PRESSED; + if (d->props.i2c_algo->master_xfer(&d->i2c_adap, &msg, 1) == 1) { + for (i = 0; i < keymap_size ; i++) { + if (rc5_data(&keymap[i]) == msg.buf[0]) { + *state = REMOTE_KEY_PRESSED; + *event = keymap[i].keycode; + break; + } + + } + + if ((*state) == REMOTE_KEY_PRESSED) + deb_rc("%s: found rc key: %x, %x, event: %x\n", + __func__, key[0], key[1], (*event)); + else if (key[0] != 0xff) + deb_rc("%s: unknown rc key: %x, %x\n", + __func__, key[0], key[1]); + + } + + return 0; +} + +enum dw2102_table_entry { + CYPRESS_DW2102, + CYPRESS_DW2101, + CYPRESS_DW2104, + TEVII_S650, + TERRATEC_CINERGY_S, + CYPRESS_DW3101, + TEVII_S630, + PROF_1100, + TEVII_S660, + PROF_7500, + GENIATECH_SU3000, + TERRATEC_CINERGY_S2, + TEVII_S480_1, + TEVII_S480_2, + X3M_SPC1400HD, +}; + +static struct usb_device_id dw2102_table[] = { + [CYPRESS_DW2102] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)}, + [CYPRESS_DW2101] = {USB_DEVICE(USB_VID_CYPRESS, 0x2101)}, + [CYPRESS_DW2104] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2104)}, + [TEVII_S650] = {USB_DEVICE(0x9022, USB_PID_TEVII_S650)}, + [TERRATEC_CINERGY_S] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_CINERGY_S)}, + [CYPRESS_DW3101] = {USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW3101)}, + [TEVII_S630] = {USB_DEVICE(0x9022, USB_PID_TEVII_S630)}, + [PROF_1100] = {USB_DEVICE(0x3011, USB_PID_PROF_1100)}, + [TEVII_S660] = {USB_DEVICE(0x9022, USB_PID_TEVII_S660)}, + [PROF_7500] = {USB_DEVICE(0x3034, 0x7500)}, + [GENIATECH_SU3000] = {USB_DEVICE(0x1f4d, 0x3000)}, + [TERRATEC_CINERGY_S2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00a8)}, + [TEVII_S480_1] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_1)}, + [TEVII_S480_2] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_2)}, + [X3M_SPC1400HD] = {USB_DEVICE(0x1f4d, 0x3100)}, + { } +}; + +MODULE_DEVICE_TABLE(usb, dw2102_table); + +static int dw2102_load_firmware(struct usb_device *dev, + const struct firmware *frmwr) +{ + u8 *b, *p; + int ret = 0, i; + u8 reset; + u8 reset16[] = {0, 0, 0, 0, 0, 0, 0}; + const struct firmware *fw; + const char *fw_2101 = "dvb-usb-dw2101.fw"; + + switch (dev->descriptor.idProduct) { + case 0x2101: + ret = request_firmware(&fw, fw_2101, &dev->dev); + if (ret != 0) { + err(err_str, fw_2101); + return ret; + } + break; + default: + fw = frmwr; + break; + } + info("start downloading DW210X firmware"); + p = kmalloc(fw->size, GFP_KERNEL); + reset = 1; + /*stop the CPU*/ + dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, DW210X_WRITE_MSG); + + if (p != NULL) { + memcpy(p, fw->data, fw->size); + for (i = 0; i < fw->size; i += 0x40) { + b = (u8 *) p + i; + if (dw210x_op_rw(dev, 0xa0, i, 0, b , 0x40, + DW210X_WRITE_MSG) != 0x40) { + err("error while transferring firmware"); + ret = -EINVAL; + break; + } + } + /* restart the CPU */ + reset = 0; + if (ret || dw210x_op_rw(dev, 0xa0, 0x7f92, 0, &reset, 1, + DW210X_WRITE_MSG) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + if (ret || dw210x_op_rw(dev, 0xa0, 0xe600, 0, &reset, 1, + DW210X_WRITE_MSG) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + /* init registers */ + switch (dev->descriptor.idProduct) { + case USB_PID_TEVII_S650: + dw2104_properties.rc.legacy.rc_map_table = rc_map_tevii_table; + dw2104_properties.rc.legacy.rc_map_size = + ARRAY_SIZE(rc_map_tevii_table); + case USB_PID_DW2104: + reset = 1; + dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1, + DW210X_WRITE_MSG); + /* break omitted intentionally */ + case USB_PID_DW3101: + reset = 0; + dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW210X_WRITE_MSG); + break; + case USB_PID_CINERGY_S: + case USB_PID_DW2102: + dw210x_op_rw(dev, 0xbf, 0x0040, 0, &reset, 0, + DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW210X_READ_MSG); + /* check STV0299 frontend */ + dw210x_op_rw(dev, 0xb5, 0, 0, &reset16[0], 2, + DW210X_READ_MSG); + if ((reset16[0] == 0xa1) || (reset16[0] == 0x80)) { + dw2102_properties.i2c_algo = &dw2102_i2c_algo; + dw2102_properties.adapter->fe[0].tuner_attach = &dw2102_tuner_attach; + break; + } else { + /* check STV0288 frontend */ + reset16[0] = 0xd0; + reset16[1] = 1; + reset16[2] = 0; + dw210x_op_rw(dev, 0xc2, 0, 0, &reset16[0], 3, + DW210X_WRITE_MSG); + dw210x_op_rw(dev, 0xc3, 0xd1, 0, &reset16[0], 3, + DW210X_READ_MSG); + if (reset16[2] == 0x11) { + dw2102_properties.i2c_algo = &dw2102_earda_i2c_algo; + break; + } + } + case 0x2101: + dw210x_op_rw(dev, 0xbc, 0x0030, 0, &reset16[0], 2, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xba, 0x0000, 0, &reset16[0], 7, + DW210X_READ_MSG); + dw210x_op_rw(dev, 0xb9, 0x0000, 0, &reset16[0], 2, + DW210X_READ_MSG); + break; + } + + msleep(100); + kfree(p); + } + return ret; +} + +static struct dvb_usb_device_properties dw2102_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-dw2102.fw", + .no_reconnect = 1, + + .i2c_algo = &dw2102_serit_i2c_algo, + + .rc.legacy = { + .rc_map_table = rc_map_dw210x_table, + .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x81, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .download_firmware = dw2102_load_firmware, + .read_mac_address = dw210x_read_mac_address, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = dw2102_frontend_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .num_device_descs = 3, + .devices = { + {"DVBWorld DVB-S 2102 USB2.0", + {&dw2102_table[CYPRESS_DW2102], NULL}, + {NULL}, + }, + {"DVBWorld DVB-S 2101 USB2.0", + {&dw2102_table[CYPRESS_DW2101], NULL}, + {NULL}, + }, + {"TerraTec Cinergy S USB", + {&dw2102_table[TERRATEC_CINERGY_S], NULL}, + {NULL}, + }, + } +}; + +static struct dvb_usb_device_properties dw2104_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-dw2104.fw", + .no_reconnect = 1, + + .i2c_algo = &dw2104_i2c_algo, + .rc.legacy = { + .rc_map_table = rc_map_dw210x_table, + .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x81, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .download_firmware = dw2102_load_firmware, + .read_mac_address = dw210x_read_mac_address, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = dw2104_frontend_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .num_device_descs = 2, + .devices = { + { "DVBWorld DW2104 USB2.0", + {&dw2102_table[CYPRESS_DW2104], NULL}, + {NULL}, + }, + { "TeVii S650 USB2.0", + {&dw2102_table[TEVII_S650], NULL}, + {NULL}, + }, + } +}; + +static struct dvb_usb_device_properties dw3101_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-dw3101.fw", + .no_reconnect = 1, + + .i2c_algo = &dw3101_i2c_algo, + .rc.legacy = { + .rc_map_table = rc_map_dw210x_table, + .rc_map_size = ARRAY_SIZE(rc_map_dw210x_table), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x81, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .download_firmware = dw2102_load_firmware, + .read_mac_address = dw210x_read_mac_address, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = dw3101_frontend_attach, + .tuner_attach = dw3101_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .num_device_descs = 1, + .devices = { + { "DVBWorld DVB-C 3101 USB2.0", + {&dw2102_table[CYPRESS_DW3101], NULL}, + {NULL}, + }, + } +}; + +static struct dvb_usb_device_properties s6x0_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .size_of_priv = sizeof(struct s6x0_state), + .firmware = "dvb-usb-s630.fw", + .no_reconnect = 1, + + .i2c_algo = &s6x0_i2c_algo, + .rc.legacy = { + .rc_map_table = rc_map_tevii_table, + .rc_map_size = ARRAY_SIZE(rc_map_tevii_table), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + }, + + .generic_bulk_ctrl_endpoint = 0x81, + .num_adapters = 1, + .download_firmware = dw2102_load_firmware, + .read_mac_address = s6x0_read_mac_address, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = zl100313_frontend_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .num_device_descs = 1, + .devices = { + {"TeVii S630 USB", + {&dw2102_table[TEVII_S630], NULL}, + {NULL}, + }, + } +}; + +struct dvb_usb_device_properties *p1100; +static struct dvb_usb_device_description d1100 = { + "Prof 1100 USB ", + {&dw2102_table[PROF_1100], NULL}, + {NULL}, +}; + +struct dvb_usb_device_properties *s660; +static struct dvb_usb_device_description d660 = { + "TeVii S660 USB", + {&dw2102_table[TEVII_S660], NULL}, + {NULL}, +}; + +static struct dvb_usb_device_description d480_1 = { + "TeVii S480.1 USB", + {&dw2102_table[TEVII_S480_1], NULL}, + {NULL}, +}; + +static struct dvb_usb_device_description d480_2 = { + "TeVii S480.2 USB", + {&dw2102_table[TEVII_S480_2], NULL}, + {NULL}, +}; + +struct dvb_usb_device_properties *p7500; +static struct dvb_usb_device_description d7500 = { + "Prof 7500 USB DVB-S2", + {&dw2102_table[PROF_7500], NULL}, + {NULL}, +}; + +static struct dvb_usb_device_properties su3000_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + .size_of_priv = sizeof(struct su3000_state), + .power_ctrl = su3000_power_ctrl, + .num_adapters = 1, + .identify_state = su3000_identify_state, + .i2c_algo = &su3000_i2c_algo, + + .rc.legacy = { + .rc_map_table = rc_map_su3000_table, + .rc_map_size = ARRAY_SIZE(rc_map_su3000_table), + .rc_interval = 150, + .rc_query = dw2102_rc_query, + }, + + .read_mac_address = su3000_read_mac_address, + + .generic_bulk_ctrl_endpoint = 0x01, + + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = su3000_streaming_ctrl, + .frontend_attach = su3000_frontend_attach, + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + } + }}, + } + }, + .num_device_descs = 3, + .devices = { + { "SU3000HD DVB-S USB2.0", + { &dw2102_table[GENIATECH_SU3000], NULL }, + { NULL }, + }, + { "Terratec Cinergy S2 USB HD", + { &dw2102_table[TERRATEC_CINERGY_S2], NULL }, + { NULL }, + }, + { "X3M TV SPC1400HD PCI", + { &dw2102_table[X3M_SPC1400HD], NULL }, + { NULL }, + }, + } +}; + +static int dw2102_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + p1100 = kmemdup(&s6x0_properties, + sizeof(struct dvb_usb_device_properties), GFP_KERNEL); + if (!p1100) + return -ENOMEM; + /* copy default structure */ + /* fill only different fields */ + p1100->firmware = "dvb-usb-p1100.fw"; + p1100->devices[0] = d1100; + p1100->rc.legacy.rc_map_table = rc_map_tbs_table; + p1100->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table); + p1100->adapter->fe[0].frontend_attach = stv0288_frontend_attach; + + s660 = kmemdup(&s6x0_properties, + sizeof(struct dvb_usb_device_properties), GFP_KERNEL); + if (!s660) { + kfree(p1100); + return -ENOMEM; + } + s660->firmware = "dvb-usb-s660.fw"; + s660->num_device_descs = 3; + s660->devices[0] = d660; + s660->devices[1] = d480_1; + s660->devices[2] = d480_2; + s660->adapter->fe[0].frontend_attach = ds3000_frontend_attach; + + p7500 = kmemdup(&s6x0_properties, + sizeof(struct dvb_usb_device_properties), GFP_KERNEL); + if (!p7500) { + kfree(p1100); + kfree(s660); + return -ENOMEM; + } + p7500->firmware = "dvb-usb-p7500.fw"; + p7500->devices[0] = d7500; + p7500->rc.legacy.rc_map_table = rc_map_tbs_table; + p7500->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table); + p7500->adapter->fe[0].frontend_attach = prof_7500_frontend_attach; + + if (0 == dvb_usb_device_init(intf, &dw2102_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dw2104_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &dw3101_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &s6x0_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, p1100, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, s660, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, p7500, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &su3000_properties, + THIS_MODULE, NULL, adapter_nr)) + return 0; + + return -ENODEV; +} + +static struct usb_driver dw2102_driver = { + .name = "dw2102", + .probe = dw2102_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dw2102_table, +}; + +module_usb_driver(dw2102_driver); + +MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by"); +MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104," + " DVB-C 3101 USB2.0," + " TeVii S600, S630, S650, S660, S480," + " Prof 1100, 7500 USB2.0," + " Geniatech SU3000 devices"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/dw2102.h b/drivers/media/usb/dvb-usb/dw2102.h new file mode 100644 index 000000000000..5cd0b0eb6ce1 --- /dev/null +++ b/drivers/media/usb/dvb-usb/dw2102.h @@ -0,0 +1,9 @@ +#ifndef _DW2102_H_ +#define _DW2102_H_ + +#define DVB_USB_LOG_PREFIX "dw2102" +#include "dvb-usb.h" + +#define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_dw2102_debug, 0x04, args) +#endif diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c new file mode 100644 index 000000000000..90a70c66a96e --- /dev/null +++ b/drivers/media/usb/dvb-usb/friio-fe.c @@ -0,0 +1,473 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include <linux/init.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include "friio.h" + +struct jdvbt90502_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + struct jdvbt90502_config config; +}; + +/* NOTE: TC90502 has 16bit register-address? */ +/* register 0x0100 is used for reading PLL status, so reg is u16 here */ +static int jdvbt90502_reg_read(struct jdvbt90502_state *state, + const u16 reg, u8 *buf, const size_t count) +{ + int ret; + u8 wbuf[3]; + struct i2c_msg msg[2]; + + wbuf[0] = reg & 0xFF; + wbuf[1] = 0; + wbuf[2] = reg >> 8; + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = wbuf; + msg[0].len = sizeof(wbuf); + + msg[1].addr = msg[0].addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + deb_fe(" reg read failed.\n"); + return -EREMOTEIO; + } + return 0; +} + +/* currently 16bit register-address is not used, so reg is u8 here */ +static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state, + const u8 reg, const u8 val) +{ + struct i2c_msg msg; + u8 wbuf[2]; + + wbuf[0] = reg; + wbuf[1] = val; + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.buf = wbuf; + msg.len = sizeof(wbuf); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + deb_fe(" reg write failed."); + return -EREMOTEIO; + } + return 0; +} + +static int _jdvbt90502_write(struct dvb_frontend *fe, const u8 buf[], int len) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + int err, i; + for (i = 0; i < len - 1; i++) { + err = jdvbt90502_single_reg_write(state, + buf[0] + i, buf[i + 1]); + if (err) + return err; + } + + return 0; +} + +/* read pll status byte via the demodulator's I2C register */ +/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */ +static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result) +{ + int ret; + + /* +1 for reading */ + u8 pll_addr_byte = (state->config.pll_address << 1) + 1; + + *result = 0; + + ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG, + pll_addr_byte); + if (ret) + goto error; + + ret = jdvbt90502_reg_read(state, 0x0100, result, 1); + if (ret) + goto error; + + deb_fe("PLL read val:%02x\n", *result); + return 0; + +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + + +/* set pll frequency via the demodulator's I2C register */ +static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq) +{ + int ret; + int retry; + u8 res1; + u8 res2[9]; + + u8 pll_freq_cmd[PLL_CMD_LEN]; + u8 pll_agc_cmd[PLL_CMD_LEN]; + struct i2c_msg msg[2]; + u32 f; + + deb_fe("%s: freq=%d, step=%d\n", __func__, freq, + state->frontend.ops.info.frequency_stepsize); + /* freq -> oscilator frequency conversion. */ + /* freq: 473,000,000 + n*6,000,000 [+ 142857 (center freq. shift)] */ + f = freq / state->frontend.ops.info.frequency_stepsize; + /* add 399[1/7 MHZ] = 57MHz for the IF */ + f += 399; + /* add center frequency shift if necessary */ + if (f % 7 == 0) + f++; + pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */ + pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1; + pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F; + pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF; + pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */ + pll_freq_cmd[BANDSWITCH_BYTE] = 0x08; /* UHF band */ + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = pll_freq_cmd; + msg[0].len = sizeof(pll_freq_cmd); + + ret = i2c_transfer(state->i2c, &msg[0], 1); + if (ret != 1) + goto error; + + udelay(50); + + pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG]; + pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE]; + pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1]; + pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2]; + pll_agc_cmd[CONTROL_BYTE] = 0x9A; /* AGC_CTRL instead of BANDSWITCH */ + pll_agc_cmd[AGC_CTRL_BYTE] = 0x50; + /* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */ + + msg[1].addr = msg[0].addr; + msg[1].flags = 0; + msg[1].buf = pll_agc_cmd; + msg[1].len = sizeof(pll_agc_cmd); + + ret = i2c_transfer(state->i2c, &msg[1], 1); + if (ret != 1) + goto error; + + /* I don't know what these cmds are for, */ + /* but the USB log on a windows box contains them */ + ret = jdvbt90502_single_reg_write(state, 0x01, 0x40); + ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00); + if (ret) + goto error; + udelay(100); + + /* wait for the demod to be ready? */ +#define RETRY_COUNT 5 + for (retry = 0; retry < RETRY_COUNT; retry++) { + ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1); + if (ret) + goto error; + /* if (res1 != 0x00) goto error; */ + ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2)); + if (ret) + goto error; + if (res2[0] >= 0xA7) + break; + msleep(100); + } + if (retry >= RETRY_COUNT) { + deb_fe("%s: FE does not get ready after freq setting.\n", + __func__); + return -EREMOTEIO; + } + + return 0; +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + +static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state) +{ + u8 result; + int ret; + + *state = FE_HAS_SIGNAL; + + ret = jdvbt90502_pll_read(fe->demodulator_priv, &result); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + *state = FE_HAS_SIGNAL + | FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC; + + if (result & PLL_STATUS_LOCKED) + *state |= FE_HAS_LOCK; + + return 0; +} + +static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + int ret; + u8 rbuf[37]; + + *strength = 0; + + /* status register (incl. signal strength) : 0x89 */ + /* TODO: read just the necessary registers [0x8B..0x8D]? */ + ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089, + rbuf, sizeof(rbuf)); + + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + /* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */ + *strength = (rbuf[3] << 8) + rbuf[4]; + if (rbuf[2]) + *strength = 0xffff; + + return 0; +} + + +/* filter out un-supported properties to notify users */ +static int jdvbt90502_set_property(struct dvb_frontend *fe, + struct dtv_property *tvp) +{ + int r = 0; + + switch (tvp->cmd) { + case DTV_DELIVERY_SYSTEM: + if (tvp->u.data != SYS_ISDBT) + r = -EINVAL; + break; + case DTV_CLEAR: + case DTV_TUNE: + case DTV_FREQUENCY: + break; + default: + r = -EINVAL; + } + return r; +} + +static int jdvbt90502_get_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + p->inversion = INVERSION_AUTO; + p->bandwidth_hz = 6000000; + p->code_rate_HP = FEC_AUTO; + p->code_rate_LP = FEC_AUTO; + p->modulation = QAM_64; + p->transmission_mode = TRANSMISSION_MODE_AUTO; + p->guard_interval = GUARD_INTERVAL_AUTO; + p->hierarchy = HIERARCHY_AUTO; + return 0; +} + +static int jdvbt90502_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + + /** + * NOTE: ignore all the parameters except frequency. + * others should be fixed to the proper value for ISDB-T, + * but don't check here. + */ + + struct jdvbt90502_state *state = fe->demodulator_priv; + int ret; + + deb_fe("%s: Freq:%d\n", __func__, p->frequency); + + /* for recovery from DTV_CLEAN */ + fe->dtv_property_cache.delivery_system = SYS_ISDBT; + + ret = jdvbt90502_pll_set_freq(state, p->frequency); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + return 0; +} + + +/** + * (reg, val) commad list to initialize this module. + * captured on a Windows box. + */ +static u8 init_code[][2] = { + {0x01, 0x40}, + {0x04, 0x38}, + {0x05, 0x40}, + {0x07, 0x40}, + {0x0F, 0x4F}, + {0x11, 0x21}, + {0x12, 0x0B}, + {0x13, 0x2F}, + {0x14, 0x31}, + {0x16, 0x02}, + {0x21, 0xC4}, + {0x22, 0x20}, + {0x2C, 0x79}, + {0x2D, 0x34}, + {0x2F, 0x00}, + {0x30, 0x28}, + {0x31, 0x31}, + {0x32, 0xDF}, + {0x38, 0x01}, + {0x39, 0x78}, + {0x3B, 0x33}, + {0x3C, 0x33}, + {0x48, 0x90}, + {0x51, 0x68}, + {0x5E, 0x38}, + {0x71, 0x00}, + {0x72, 0x08}, + {0x77, 0x00}, + {0xC0, 0x21}, + {0xC1, 0x10}, + {0xE4, 0x1A}, + {0xEA, 0x1F}, + {0x77, 0x00}, + {0x71, 0x00}, + {0x71, 0x00}, + {0x76, 0x0C}, +}; + +static const int init_code_len = sizeof(init_code) / sizeof(u8[2]); + +static int jdvbt90502_init(struct dvb_frontend *fe) +{ + int i = -1; + int ret; + struct i2c_msg msg; + + struct jdvbt90502_state *state = fe->demodulator_priv; + + deb_fe("%s called.\n", __func__); + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.len = 2; + for (i = 0; i < init_code_len; i++) { + msg.buf = init_code[i]; + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + goto error; + } + fe->dtv_property_cache.delivery_system = SYS_ISDBT; + msleep(100); + + return 0; + +error: + deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret); + return -EREMOTEIO; +} + + +static void jdvbt90502_release(struct dvb_frontend *fe) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops jdvbt90502_ops; + +struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d) +{ + struct jdvbt90502_state *state = NULL; + + deb_info("%s called.\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = &d->i2c_adap; + memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config)); + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &jdvbt90502_ops, + sizeof(jdvbt90502_ops)); + state->frontend.demodulator_priv = state; + + if (jdvbt90502_init(&state->frontend) < 0) + goto error; + + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops jdvbt90502_ops = { + .delsys = { SYS_ISDBT }, + .info = { + .name = "Comtech JDVBT90502 ISDB-T", + .frequency_min = 473000000, /* UHF 13ch, center */ + .frequency_max = 767142857, /* UHF 62ch, center */ + .frequency_stepsize = JDVBT90502_PLL_CLK / JDVBT90502_PLL_DIVIDER, + .frequency_tolerance = 0, + + /* NOTE: this driver ignores all parameters but frequency. */ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = jdvbt90502_release, + + .init = jdvbt90502_init, + .write = _jdvbt90502_write, + + .set_property = jdvbt90502_set_property, + + .set_frontend = jdvbt90502_set_frontend, + .get_frontend = jdvbt90502_get_frontend, + + .read_status = jdvbt90502_read_status, + .read_signal_strength = jdvbt90502_read_signal_strength, +}; diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c new file mode 100644 index 000000000000..474a17e4db0c --- /dev/null +++ b/drivers/media/usb/dvb-usb/friio.c @@ -0,0 +1,522 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "friio.h" + +/* debug */ +int dvb_usb_friio_debug; +module_param_named(debug, dvb_usb_friio_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))." + DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/** + * Indirect I2C access to the PLL via FE. + * whole I2C protocol data to the PLL is sent via the FE's I2C register. + * This is done by a control msg to the FE with the I2C data accompanied, and + * a specific USB request number is assigned for that purpose. + * + * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE). + * TODO: refoctored, smarter i2c functions. + */ +static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */ + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write only */ + u8 req, type; + + deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n", + wbuf[1], wbuf[0], wlen - 1); + + if (wo && wlen >= 2) { + req = GL861_REQ_I2C_DATA_CTRL_WRITE; + type = GL861_WRITE; + udelay(20); + return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + req, type, value, index, + &wbuf[1], wlen - 1, 2000); + } + + deb_xfer("not supported ctrl-msg, aborting."); + return -EINVAL; +} + +/* normal I2C access (without extra data arguments). + * write to the register wbuf[0] at I2C address addr with the value wbuf[1], + * or read from the register wbuf[0]. + * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3 + */ +static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index; + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 req, type; + unsigned int pipe; + + /* special case for the indirect I2C access to the PLL via FE, */ + if (addr == friio_fe_config.demod_address && + wbuf[0] == JDVBT90502_2ND_I2C_REG) + return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen); + + if (wo) { + req = GL861_REQ_I2C_WRITE; + type = GL861_WRITE; + pipe = usb_sndctrlpipe(d->udev, 0); + } else { /* rw */ + req = GL861_REQ_I2C_READ; + type = GL861_READ; + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + switch (wlen) { + case 1: + index = wbuf[0]; + break; + case 2: + index = wbuf[0]; + value = value + wbuf[1]; + break; + case 3: + /* special case for 16bit register-address */ + index = (wbuf[2] << 8) | wbuf[0]; + value = value + wbuf[1]; + break; + default: + deb_xfer("wlen = %x, aborting.", wlen); + return -EINVAL; + } + msleep(1); + return usb_control_msg(d->udev, pipe, req, type, + value, index, rbuf, rlen, 2000); +} + +/* I2C */ +static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { + if (gl861_i2c_msg(d, msg[i].addr, + msg[i].buf, msg[i].len, + msg[i + 1].buf, msg[i + 1].len) < 0) + break; + i++; + } else + if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 gl861_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int friio_ext_ctl(struct dvb_usb_adapter *adap, + u32 sat_color, int lnb_on) +{ + int i; + int ret; + struct i2c_msg msg; + u8 *buf; + u32 mask; + u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + msg.addr = 0x00; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + + buf[0] = 0x00; + + /* send 2bit header (&B10) */ + buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE; + ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + buf[1] = lnb | FRIIO_CTL_STROBE; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + /* send 32bit(satur, R, G, B) data in serial */ + mask = 1 << 31; + for (i = 0; i < 32; i++) { + buf[1] = lnb | FRIIO_CTL_STROBE; + if (sat_color & mask) + buf[1] |= FRIIO_CTL_LED; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + mask >>= 1; + } + + /* set the strobe off */ + buf[1] = lnb; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + kfree(buf); + return (ret == 70); +} + + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); + +/* TODO: move these init cmds to the FE's init routine? */ +static u8 streaming_init_cmds[][2] = { + {0x33, 0x08}, + {0x37, 0x40}, + {0x3A, 0x1F}, + {0x3B, 0xFF}, + {0x3C, 0x1F}, + {0x3D, 0xFF}, + {0x38, 0x00}, + {0x35, 0x00}, + {0x39, 0x00}, + {0x36, 0x00}, +}; +static int cmdlen = sizeof(streaming_init_cmds) / 2; + +/* + * Command sequence in this init function is a replay + * of the captured USB commands from the Windows proprietary driver. + */ +static int friio_initialize(struct dvb_usb_device *d) +{ + int ret; + int i; + int retry = 0; + u8 *rbuf, *wbuf; + + deb_info("%s called.\n", __func__); + + wbuf = kmalloc(3, GFP_KERNEL); + if (!wbuf) + return -ENOMEM; + + rbuf = kmalloc(2, GFP_KERNEL); + if (!rbuf) { + kfree(wbuf); + return -ENOMEM; + } + + /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */ + /* because the i2c device is not set up yet. */ + wbuf[0] = 0x11; + wbuf[1] = 0x02; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(2); + + wbuf[0] = 0x11; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(1); + + /* following msgs should be in the FE's init code? */ + /* cmd sequence to identify the device type? (friio black/white) */ + wbuf[0] = 0x03; + wbuf[1] = 0x80; + /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */ + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x1200, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(2); + wbuf[0] = 0x03; + wbuf[1] = 0x80; + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x9000, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff again. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(1); + +restart: + /* ============ start DEMOD init cmds ================== */ + /* read PLL status to clear the POR bit */ + wbuf[0] = JDVBT90502_2ND_I2C_REG; + wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(5); + /* note: DEMODULATOR has 16bit register-address. */ + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg addr: 0x0100 */ + wbuf[1] = 0x00; /* val: not used */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1); + if (ret < 0) + goto error; +/* + msleep(1); + wbuf[0] = 0x80; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1); + if (ret < 0) + goto error; + */ + if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */ + if (++retry > 3) { + deb_info("failed to get the correct" + " FE demod status:0x%02x\n", rbuf[0]); + goto error; + } + msleep(100); + goto restart; + } + + /* TODO: check return value in rbuf */ + /* =========== end DEMOD init cmds ===================== */ + msleep(1); + + wbuf[0] = 0x30; + wbuf[1] = 0x04; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(2); + /* following 2 cmds unnecessary? */ + wbuf[0] = 0x00; + wbuf[1] = 0x01; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + wbuf[0] = 0x06; + wbuf[1] = 0x0F; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + /* some streaming ctl cmds (maybe) */ + msleep(10); + for (i = 0; i < cmdlen; i++) { + ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2, + NULL, 0); + if (ret < 0) + goto error; + msleep(1); + } + msleep(20); + + /* change the LED color etc. */ + ret = friio_streaming_ctrl(&d->adapter[0], 0); + if (ret < 0) + goto error; + + return 0; + +error: + kfree(wbuf); + kfree(rbuf); + deb_info("%s:ret == %d\n", __func__, ret); + return -EIO; +} + +/* Callbacks for DVB USB */ + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + + deb_info("%s called.(%d)\n", __func__, onoff); + + /* set the LED color and saturation (and LNB on) */ + if (onoff) + ret = friio_ext_ctl(adap, 0x6400ff64, 1); + else + ret = friio_ext_ctl(adap, 0x96ff00ff, 1); + + if (ret != 1) { + deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret); + return -EREMOTEIO; + } + return 0; +} + +static int friio_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (friio_initialize(adap->dev) < 0) + return -EIO; + + adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev); + if (adap->fe_adap[0].fe == NULL) + return -EIO; + + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties friio_properties; + +static int friio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + if (intf->num_altsetting < GL861_ALTSETTING_COUNT) + return -ENODEV; + + alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING); + if (alt == NULL) { + deb_rc("not alt found!\n"); + return -ENODEV; + } + ret = usb_set_interface(interface_to_usbdev(intf), + alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret != 0) { + deb_rc("failed to set alt-setting!\n"); + return ret; + } + + ret = dvb_usb_device_init(intf, &friio_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) + friio_streaming_ctrl(&d->adapter[0], 1); + + return ret; +} + + +struct jdvbt90502_config friio_fe_config = { + .demod_address = FRIIO_DEMOD_ADDR, + .pll_address = FRIIO_PLL_ADDR, +}; + +static struct i2c_algorithm gl861_i2c_algo = { + .master_xfer = gl861_i2c_xfer, + .functionality = gl861_i2c_func, +}; + +static struct usb_device_id friio_table[] = { + { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, friio_table); + + +static struct dvb_usb_device_properties friio_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = { + /* caps:0 => no pid filter, 188B TS packet */ + /* GL861 has a HW pid filter, but no info available. */ + { + .num_frontends = 1, + .fe = {{ + .caps = 0, + + .frontend_attach = friio_frontend_attach, + .streaming_ctrl = friio_streaming_ctrl, + + .stream = { + .type = USB_BULK, + /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */ + .count = 8, + .endpoint = 0x01, + .u = { + /* GL861 has 6KB buf inside */ + .bulk = { + .buffersize = 16384, + } + } + }, + }}, + } + }, + .i2c_algo = &gl861_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "774 Friio ISDB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &friio_table[0], NULL }, + }, + } +}; + +static struct usb_driver friio_driver = { + .name = "dvb_usb_friio", + .probe = friio_probe, + .disconnect = dvb_usb_device_exit, + .id_table = friio_table, +}; + +module_usb_driver(friio_driver); + +MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>"); +MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver"); +MODULE_VERSION("0.2"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h new file mode 100644 index 000000000000..0f461ca10cb9 --- /dev/null +++ b/drivers/media/usb/dvb-usb/friio.h @@ -0,0 +1,99 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_FRIIO_H_ +#define _DVB_USB_FRIIO_H_ + +/** + * Friio Components + * USB hub: AU4254 + * USB controller(+ TS dmx & streaming): GL861 + * Frontend: comtech JDVBT-90502 + * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1)) + * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1)) + * LED x3 (+LNB) control: PIC 16F676 + * EEPROM: 24C08 + * + * (USB smart card reader: AU9522) + * + */ + +#define DVB_USB_LOG_PREFIX "friio" +#include "dvb-usb.h" + +extern int dvb_usb_friio_debug; +#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args) + +/* Vendor requests */ +#define GL861_WRITE 0x40 +#define GL861_READ 0xc0 + +/* command bytes */ +#define GL861_REQ_I2C_WRITE 0x01 +#define GL861_REQ_I2C_READ 0x02 +/* For control msg with data argument */ +/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */ +#define GL861_REQ_I2C_DATA_CTRL_WRITE 0x03 + +#define GL861_ALTSETTING_COUNT 2 +#define FRIIO_BULK_ALTSETTING 0 +#define FRIIO_ISOC_ALTSETTING 1 + +/* LED & LNB control via PIC. */ +/* basically, it's serial control with clock and strobe. */ +/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */ +/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/ +#define FRIIO_CTL_LNB (1 << 0) +#define FRIIO_CTL_STROBE (1 << 1) +#define FRIIO_CTL_CLK (1 << 2) +#define FRIIO_CTL_LED (1 << 3) + +/* Front End related */ + +#define FRIIO_DEMOD_ADDR (0x30 >> 1) +#define FRIIO_PLL_ADDR (0xC0 >> 1) + +#define JDVBT90502_PLL_CLK 4000000 +#define JDVBT90502_PLL_DIVIDER 28 + +#define JDVBT90502_2ND_I2C_REG 0xFE + +/* byte index for pll i2c command data structure*/ +/* see datasheet for tua6034 */ +#define DEMOD_REDIRECT_REG 0 +#define ADDRESS_BYTE 1 +#define DIVIDER_BYTE1 2 +#define DIVIDER_BYTE2 3 +#define CONTROL_BYTE 4 +#define BANDSWITCH_BYTE 5 +#define AGC_CTRL_BYTE 5 +#define PLL_CMD_LEN 6 + +/* bit masks for PLL STATUS response */ +#define PLL_STATUS_POR_MODE 0x80 /* 1: Power on Reset (test) Mode */ +#define PLL_STATUS_LOCKED 0x40 /* 1: locked */ +#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */ +#define PLL_STATUS_TESTMODE 0x07 /* digital output level (5 level) */ + /* 0.15Vcc step 0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */ + + +struct jdvbt90502_config { + u8 demod_address; /* i2c addr for demodulator IC */ + u8 pll_address; /* PLL addr on the secondary i2c*/ +}; +extern struct jdvbt90502_config friio_fe_config; + +extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d); +#endif diff --git a/drivers/media/usb/dvb-usb/gp8psk-fe.c b/drivers/media/usb/dvb-usb/gp8psk-fe.c new file mode 100644 index 000000000000..67957dd99ede --- /dev/null +++ b/drivers/media/usb/dvb-usb/gp8psk-fe.c @@ -0,0 +1,369 @@ +/* DVB USB compliant Linux driver for the + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module + * + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) + * + * Thanks to GENPIX for the sample code used to implement this module. + * + * This module is based off the vp7045 and vp702x modules + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "gp8psk.h" + +struct gp8psk_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; + u8 lock; + u16 snr; + unsigned long next_status_check; + unsigned long status_check_interval; +}; + +static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 status; + gp8psk_usb_in_op(st->d, GET_8PSK_CONFIG, 0, 0, &status, 1); + return status & bmDCtuned; +} + +static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode) +{ + struct gp8psk_fe_state *state = fe->demodulator_priv; + return gp8psk_usb_out_op(state->d, SET_8PSK_CONFIG, mode, 0, NULL, 0); +} + +static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) +{ + u8 buf[6]; + if (time_after(jiffies,st->next_status_check)) { + gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1); + gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6); + st->snr = (buf[1]) << 8 | buf[0]; + st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; + } + return 0; +} + +static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + gp8psk_fe_update_status(st); + + if (st->lock) + *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; + else + *status = 0; + + if (*status & FE_HAS_LOCK) + st->status_check_interval = 1000; + else + st->status_check_interval = 100; + return 0; +} + +/* not supported by this Frontend */ +static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + (void) fe; + *ber = 0; + return 0; +} + +/* not supported by this Frontend */ +static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + (void) fe; + *unc = 0; + return 0; +} + +static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + gp8psk_fe_update_status(st); + /* snr is reported in dBu*256 */ + *snr = st->snr; + return 0; +} + +static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + gp8psk_fe_update_status(st); + /* snr is reported in dBu*256 */ + /* snr / 38.4 ~= 100% strength */ + /* snr * 17 returns 100% strength as 65535 */ + if (st->snr > 0xf00) + *strength = 0xffff; + else + *strength = (st->snr << 4) + st->snr; /* snr*17 */ + return 0; +} + +static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) +{ + struct gp8psk_fe_state *state = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 cmd[10]; + u32 freq = c->frequency * 1000; + int gp_product_id = le16_to_cpu(state->d->udev->descriptor.idProduct); + + deb_fe("%s()\n", __func__); + + cmd[4] = freq & 0xff; + cmd[5] = (freq >> 8) & 0xff; + cmd[6] = (freq >> 16) & 0xff; + cmd[7] = (freq >> 24) & 0xff; + + /* backwards compatibility: DVB-S + 8-PSK were used for Turbo-FEC */ + if (c->delivery_system == SYS_DVBS && c->modulation == PSK_8) + c->delivery_system = SYS_TURBO; + + switch (c->delivery_system) { + case SYS_DVBS: + if (c->modulation != QPSK) { + deb_fe("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + c->fec_inner = FEC_AUTO; + break; + case SYS_DVBS2: /* kept for backwards compatibility */ + deb_fe("%s: DVB-S2 delivery system selected\n", __func__); + break; + case SYS_TURBO: + deb_fe("%s: Turbo-FEC delivery system selected\n", __func__); + break; + + default: + deb_fe("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + cmd[0] = c->symbol_rate & 0xff; + cmd[1] = (c->symbol_rate >> 8) & 0xff; + cmd[2] = (c->symbol_rate >> 16) & 0xff; + cmd[3] = (c->symbol_rate >> 24) & 0xff; + switch (c->modulation) { + case QPSK: + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (gp8psk_tuned_to_DCII(fe)) + gp8psk_bcm4500_reload(state->d); + switch (c->fec_inner) { + case FEC_1_2: + cmd[9] = 0; break; + case FEC_2_3: + cmd[9] = 1; break; + case FEC_3_4: + cmd[9] = 2; break; + case FEC_5_6: + cmd[9] = 3; break; + case FEC_7_8: + cmd[9] = 4; break; + case FEC_AUTO: + cmd[9] = 5; break; + default: + cmd[9] = 5; break; + } + if (c->delivery_system == SYS_TURBO) + cmd[8] = ADV_MOD_TURBO_QPSK; + else + cmd[8] = ADV_MOD_DVB_QPSK; + break; + case PSK_8: /* PSK_8 is for compatibility with DN */ + cmd[8] = ADV_MOD_TURBO_8PSK; + switch (c->fec_inner) { + case FEC_2_3: + cmd[9] = 0; break; + case FEC_3_4: + cmd[9] = 1; break; + case FEC_3_5: + cmd[9] = 2; break; + case FEC_5_6: + cmd[9] = 3; break; + case FEC_8_9: + cmd[9] = 4; break; + default: + cmd[9] = 0; break; + } + break; + case QAM_16: /* QAM_16 is for compatibility with DN */ + cmd[8] = ADV_MOD_TURBO_16QAM; + cmd[9] = 0; + break; + default: /* Unknown modulation */ + deb_fe("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + gp8psk_set_tuner_mode(fe, 0); + gp8psk_usb_out_op(state->d, TUNE_8PSK, 0, 0, cmd, 10); + + state->lock = 0; + state->next_status_check = jiffies; + state->status_check_interval = 200; + + return 0; +} + +static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd *m) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + deb_fe("%s\n",__func__); + + if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, + m->msg, m->msg_len)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe, + fe_sec_mini_cmd_t burst) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 cmd; + + deb_fe("%s\n",__func__); + + /* These commands are certainly wrong */ + cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; + + if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0, + &cmd, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + + if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE, + (tone == SEC_TONE_ON), 0, NULL, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + + if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, + voltage == SEC_VOLTAGE_18, 0, NULL, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0); +} + +static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) +{ + struct gp8psk_fe_state* state = fe->demodulator_priv; + u8 cmd = sw_cmd & 0x7f; + + if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0, + NULL, 0)) { + return -EINVAL; + } + if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), + 0, NULL, 0)) { + return -EINVAL; + } + + return 0; +} + +static void gp8psk_fe_release(struct dvb_frontend* fe) +{ + struct gp8psk_fe_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops gp8psk_fe_ops; + +struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d) +{ + struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); + if (s == NULL) + goto error; + + s->d = d; + memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); + s->fe.demodulator_priv = s; + + goto success; +error: + return NULL; +success: + return &s->fe; +} + + +static struct dvb_frontend_ops gp8psk_fe_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Genpix DVB-S", + .frequency_min = 800000, + .frequency_max = 2250000, + .frequency_stepsize = 100, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + /* + * FE_CAN_QAM_16 is for compatibility + * (Myth incorrectly detects Turbo-QPSK as plain QAM-16) + */ + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_TURBO_FEC + }, + + .release = gp8psk_fe_release, + + .init = NULL, + .sleep = NULL, + + .set_frontend = gp8psk_fe_set_frontend, + + .get_tune_settings = gp8psk_fe_get_tune_settings, + + .read_status = gp8psk_fe_read_status, + .read_ber = gp8psk_fe_read_ber, + .read_signal_strength = gp8psk_fe_read_signal_strength, + .read_snr = gp8psk_fe_read_snr, + .read_ucblocks = gp8psk_fe_read_unc_blocks, + + .diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg, + .diseqc_send_burst = gp8psk_fe_send_diseqc_burst, + .set_tone = gp8psk_fe_set_tone, + .set_voltage = gp8psk_fe_set_voltage, + .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, + .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage +}; diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c new file mode 100644 index 000000000000..5d0384dd45b5 --- /dev/null +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -0,0 +1,328 @@ +/* DVB USB compliant Linux driver for the + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module + * + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) + * + * Thanks to GENPIX for the sample code used to implement this module. + * + * This module is based off the vp7045 and vp702x modules + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "gp8psk.h" + +/* debug */ +static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw"; +int dvb_usb_gp8psk_debug; +module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) +{ + return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6)); +} + +static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) +{ + return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1)); +} + +static void gp8psk_info(struct dvb_usb_device *d) +{ + u8 fpga_vers, fw_vers[6]; + + if (!gp8psk_get_fw_version(d, fw_vers)) + info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", + fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), + 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); + else + info("failed to get FW version"); + + if (!gp8psk_get_fpga_version(d, &fpga_vers)) + info("FPGA Version = %i", fpga_vers); + else + info("failed to get FPGA version"); +} + +int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) +{ + int ret = 0,try = 0; + + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) + return ret; + + while (ret >= 0 && ret != blen && try < 3) { + ret = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev,0), + req, + USB_TYPE_VENDOR | USB_DIR_IN, + value,index,b,blen, + 2000); + deb_info("reading number %d (ret: %d)\n",try,ret); + try++; + } + + if (ret < 0 || ret != blen) { + warn("usb in %d operation failed.", req); + ret = -EIO; + } else + ret = 0; + + deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); + debug_dump(b,blen,deb_xfer); + + mutex_unlock(&d->usb_mutex); + + return ret; +} + +int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); + debug_dump(b,blen,deb_xfer); + + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) + return ret; + + if (usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev,0), + req, + USB_TYPE_VENDOR | USB_DIR_OUT, + value,index,b,blen, + 2000) != blen) { + warn("usb out operation failed."); + ret = -EIO; + } else + ret = 0; + mutex_unlock(&d->usb_mutex); + + return ret; +} + +static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) +{ + int ret; + const struct firmware *fw = NULL; + const u8 *ptr; + u8 *buf; + if ((ret = request_firmware(&fw, bcm4500_firmware, + &d->udev->dev)) != 0) { + err("did not find the bcm4500 firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + bcm4500_firmware,ret); + return ret; + } + + ret = -EINVAL; + + if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) + goto out_rel_fw; + + info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware); + + ptr = fw->data; + buf = kmalloc(64, GFP_KERNEL | GFP_DMA); + if (!buf) { + ret = -ENOMEM; + goto out_rel_fw; + } + + while (ptr[0] != 0xff) { + u16 buflen = ptr[0] + 4; + if (ptr + buflen >= fw->data + fw->size) { + err("failed to load bcm4500 firmware."); + goto out_free; + } + memcpy(buf, ptr, buflen); + if (dvb_usb_generic_write(d, buf, buflen)) { + err("failed to load bcm4500 firmware."); + goto out_free; + } + ptr += buflen; + } + + ret = 0; + +out_free: + kfree(buf); +out_rel_fw: + release_firmware(fw); + + return ret; +} + +static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 status, buf; + int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); + + if (onoff) { + gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1); + if (! (status & bm8pskStarted)) { /* started */ + if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) + gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0); + if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) + return -EINVAL; + gp8psk_info(d); + } + + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ + if(gp8psk_load_bcm4500fw(d)) + return -EINVAL; + + if (! (status & bmIntersilOn)) /* LNB Power */ + if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, + &buf, 1)) + return -EINVAL; + + /* Set DVB mode to 1 */ + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) + return -EINVAL; + /* Abort possible TS (if previous tune crashed) */ + if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) + return -EINVAL; + } else { + /* Turn off LNB power */ + if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) + return -EINVAL; + /* Turn off 8psk power */ + if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) + return -EINVAL; + if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K) + gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0); + } + return 0; +} + +int gp8psk_bcm4500_reload(struct dvb_usb_device *d) +{ + u8 buf; + int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); + /* Turn off 8psk power */ + if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) + return -EINVAL; + /* Turn On 8psk power */ + if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1)) + return -EINVAL; + /* load BCM4500 firmware */ + if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (gp8psk_load_bcm4500fw(d)) + return -EINVAL; + return 0; +} + +static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0); +} + +static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap) +{ + adap->fe_adap[0].fe = gp8psk_fe_attach(adap->dev); + return 0; +} + +static struct dvb_usb_device_properties gp8psk_properties; + +static int gp8psk_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret; + struct usb_device *udev = interface_to_usbdev(intf); + ret = dvb_usb_device_init(intf, &gp8psk_properties, + THIS_MODULE, NULL, adapter_nr); + if (ret == 0) { + info("found Genpix USB device pID = %x (hex)", + le16_to_cpu(udev->descriptor.idProduct)); + } + return ret; +} + +static struct usb_device_id gp8psk_usb_table [] = { + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) }, + { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_2) }, +/* { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) }, */ + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, gp8psk_usb_table); + +static struct dvb_usb_device_properties gp8psk_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-gp8psk-01.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = gp8psk_streaming_ctrl, + .frontend_attach = gp8psk_frontend_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }}, + } + }, + .power_ctrl = gp8psk_power_ctrl, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 4, + .devices = { + { .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver", + .cold_ids = { &gp8psk_usb_table[0], NULL }, + .warm_ids = { &gp8psk_usb_table[1], NULL }, + }, + { .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver", + .cold_ids = { NULL }, + .warm_ids = { &gp8psk_usb_table[2], NULL }, + }, + { .name = "Genpix SkyWalker-1 DVB-S receiver", + .cold_ids = { NULL }, + .warm_ids = { &gp8psk_usb_table[3], NULL }, + }, + { .name = "Genpix SkyWalker-2 DVB-S receiver", + .cold_ids = { NULL }, + .warm_ids = { &gp8psk_usb_table[4], NULL }, + }, + { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver gp8psk_usb_driver = { + .name = "dvb_usb_gp8psk", + .probe = gp8psk_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = gp8psk_usb_table, +}; + +module_usb_driver(gp8psk_usb_driver); + +MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>"); +MODULE_DESCRIPTION("Driver for Genpix DVB-S"); +MODULE_VERSION("1.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h new file mode 100644 index 000000000000..ed32b9da4843 --- /dev/null +++ b/drivers/media/usb/dvb-usb/gp8psk.h @@ -0,0 +1,100 @@ +/* DVB USB compliant Linux driver for the + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module + * + * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) + * + * Thanks to GENPIX for the sample code used to implement this module. + * + * This module is based off the vp7045 and vp702x modules + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_GP8PSK_H_ +#define _DVB_USB_GP8PSK_H_ + +#define DVB_USB_LOG_PREFIX "gp8psk" +#include "dvb-usb.h" + +extern int dvb_usb_gp8psk_debug; +#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args) +#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args) + +/* Twinhan Vendor requests */ +#define TH_COMMAND_IN 0xC0 +#define TH_COMMAND_OUT 0xC1 + +/* gp8psk commands */ + +#define GET_8PSK_CONFIG 0x80 /* in */ +#define SET_8PSK_CONFIG 0x81 +#define I2C_WRITE 0x83 +#define I2C_READ 0x84 +#define ARM_TRANSFER 0x85 +#define TUNE_8PSK 0x86 +#define GET_SIGNAL_STRENGTH 0x87 /* in */ +#define LOAD_BCM4500 0x88 +#define BOOT_8PSK 0x89 /* in */ +#define START_INTERSIL 0x8A /* in */ +#define SET_LNB_VOLTAGE 0x8B +#define SET_22KHZ_TONE 0x8C +#define SEND_DISEQC_COMMAND 0x8D +#define SET_DVB_MODE 0x8E +#define SET_DN_SWITCH 0x8F +#define GET_SIGNAL_LOCK 0x90 /* in */ +#define GET_FW_VERS 0x92 +#define GET_SERIAL_NUMBER 0x93 /* in */ +#define USE_EXTRA_VOLT 0x94 +#define GET_FPGA_VERS 0x95 +#define CW3K_INIT 0x9d + +/* PSK_configuration bits */ +#define bm8pskStarted 0x01 +#define bm8pskFW_Loaded 0x02 +#define bmIntersilOn 0x04 +#define bmDVBmode 0x08 +#define bm22kHz 0x10 +#define bmSEL18V 0x20 +#define bmDCtuned 0x40 +#define bmArmed 0x80 + +/* Satellite modulation modes */ +#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ +#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ +#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ +#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ + +#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ +#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ +#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ +#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ +#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ +#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ + +#define GET_USB_SPEED 0x07 + +#define RESET_FX2 0x13 + +#define FW_VERSION_READ 0x0B +#define VENDOR_STRING_READ 0x0C +#define PRODUCT_STRING_READ 0x0D +#define FW_BCD_VERSION_READ 0x14 + +/* firmware revision id's */ +#define GP8PSK_FW_REV1 0x020604 +#define GP8PSK_FW_REV2 0x020704 +#define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) + +extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); +extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); +extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen); +extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); + +#endif diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c new file mode 100644 index 000000000000..288af29a8bb7 --- /dev/null +++ b/drivers/media/usb/dvb-usb/m920x.c @@ -0,0 +1,1099 @@ +/* DVB USB compliant linux driver for MSI Mega Sky 580 DVB-T USB2.0 receiver + * + * Copyright (C) 2006 Aapo Tahkola (aet@rasterburn.org) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ + +#include "m920x.h" + +#include "mt352.h" +#include "mt352_priv.h" +#include "qt1010.h" +#include "tda1004x.h" +#include "tda827x.h" + +#include <media/tuner.h> +#include "tuner-simple.h" +#include <asm/unaligned.h> + +/* debug */ +static int dvb_usb_m920x_debug; +module_param_named(debug,dvb_usb_m920x_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid); + +static inline int m920x_read(struct usb_device *udev, u8 request, u16 value, + u16 index, void *data, int size) +{ + int ret; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + request, USB_TYPE_VENDOR | USB_DIR_IN, + value, index, data, size, 2000); + if (ret < 0) { + printk(KERN_INFO "m920x_read = error: %d\n", ret); + return ret; + } + + if (ret != size) { + deb("m920x_read = no data\n"); + return -EIO; + } + + return 0; +} + +static inline int m920x_write(struct usb_device *udev, u8 request, + u16 value, u16 index) +{ + int ret; + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + request, USB_TYPE_VENDOR | USB_DIR_OUT, + value, index, NULL, 0, 2000); + + return ret; +} + +static int m920x_init(struct dvb_usb_device *d, struct m920x_inits *rc_seq) +{ + int ret = 0, i, epi, flags = 0; + int adap_enabled[M9206_MAX_ADAPTERS] = { 0 }; + + /* Remote controller init. */ + if (d->props.rc.legacy.rc_query) { + deb("Initialising remote control\n"); + while (rc_seq->address) { + if ((ret = m920x_write(d->udev, M9206_CORE, + rc_seq->data, + rc_seq->address)) != 0) { + deb("Initialising remote control failed\n"); + return ret; + } + + rc_seq++; + } + + deb("Initialising remote control success\n"); + } + + for (i = 0; i < d->props.num_adapters; i++) + flags |= d->adapter[i].props.fe[0].caps; + + /* Some devices(Dposh) might crash if we attempt touch at all. */ + if (flags & DVB_USB_ADAP_HAS_PID_FILTER) { + for (i = 0; i < d->props.num_adapters; i++) { + epi = d->adapter[i].props.fe[0].stream.endpoint - 0x81; + + if (epi < 0 || epi >= M9206_MAX_ADAPTERS) { + printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n"); + return -EINVAL; + } + + adap_enabled[epi] = 1; + } + + for (i = 0; i < M9206_MAX_ADAPTERS; i++) { + if (adap_enabled[i]) + continue; + + if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x0)) != 0) + return ret; + + if ((ret = m920x_set_filter(d, 0x81 + i, 0, 0x02f5)) != 0) + return ret; + } + } + + return ret; +} + +static int m920x_init_ep(struct usb_interface *intf) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_host_interface *alt; + + if ((alt = usb_altnum_to_altsetting(intf, 1)) == NULL) { + deb("No alt found!\n"); + return -ENODEV; + } + + return usb_set_interface(udev, alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); +} + +static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct m920x_state *m = d->priv; + int i, ret = 0; + u8 *rc_state; + + rc_state = kmalloc(2, GFP_KERNEL); + if (!rc_state) + return -ENOMEM; + + if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_STATE, rc_state, 1)) != 0) + goto out; + + if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0) + goto out; + + for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) + if (rc5_data(&d->props.rc.legacy.rc_map_table[i]) == rc_state[1]) { + *event = d->props.rc.legacy.rc_map_table[i].keycode; + + switch(rc_state[0]) { + case 0x80: + *state = REMOTE_NO_KEY_PRESSED; + goto out; + + case 0x88: /* framing error or "invalid code" */ + case 0x99: + case 0xc0: + case 0xd8: + *state = REMOTE_NO_KEY_PRESSED; + m->rep_count = 0; + goto out; + + case 0x93: + case 0x92: + case 0x83: /* pinnacle PCTV310e */ + case 0x82: + m->rep_count = 0; + *state = REMOTE_KEY_PRESSED; + goto out; + + case 0x91: + case 0x81: /* pinnacle PCTV310e */ + /* prevent immediate auto-repeat */ + if (++m->rep_count > 2) + *state = REMOTE_KEY_REPEAT; + else + *state = REMOTE_NO_KEY_PRESSED; + goto out; + + default: + deb("Unexpected rc state %02x\n", rc_state[0]); + *state = REMOTE_NO_KEY_PRESSED; + goto out; + } + } + + if (rc_state[1] != 0) + deb("Unknown rc key %02x\n", rc_state[1]); + + *state = REMOTE_NO_KEY_PRESSED; + + out: + kfree(rc_state); + return ret; +} + +/* I2C */ +static int m920x_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i, j; + int ret = 0; + + if (!num) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if (msg[i].flags & (I2C_M_NO_RD_ACK | I2C_M_IGNORE_NAK | I2C_M_TEN) || msg[i].len == 0) { + /* For a 0 byte message, I think sending the address + * to index 0x80|0x40 would be the correct thing to + * do. However, zero byte messages are only used for + * probing, and since we don't know how to get the + * slave's ack, we can't probe. */ + ret = -ENOTSUPP; + goto unlock; + } + /* Send START & address/RW bit */ + if (!(msg[i].flags & I2C_M_NOSTART)) { + if ((ret = m920x_write(d->udev, M9206_I2C, + (msg[i].addr << 1) | + (msg[i].flags & I2C_M_RD ? 0x01 : 0), 0x80)) != 0) + goto unlock; + /* Should check for ack here, if we knew how. */ + } + if (msg[i].flags & I2C_M_RD) { + for (j = 0; j < msg[i].len; j++) { + /* Last byte of transaction? + * Send STOP, otherwise send ACK. */ + int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x01; + + if ((ret = m920x_read(d->udev, M9206_I2C, 0x0, + 0x20 | stop, + &msg[i].buf[j], 1)) != 0) + goto unlock; + } + } else { + for (j = 0; j < msg[i].len; j++) { + /* Last byte of transaction? Then send STOP. */ + int stop = (i+1 == num && j+1 == msg[i].len) ? 0x40 : 0x00; + + if ((ret = m920x_write(d->udev, M9206_I2C, msg[i].buf[j], stop)) != 0) + goto unlock; + /* Should check for ack here too. */ + } + } + } + ret = num; + + unlock: + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 m920x_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm m920x_i2c_algo = { + .master_xfer = m920x_i2c_xfer, + .functionality = m920x_i2c_func, +}; + +/* pid filter */ +static int m920x_set_filter(struct dvb_usb_device *d, int type, int idx, int pid) +{ + int ret = 0; + + if (pid >= 0x8000) + return -EINVAL; + + pid |= 0x8000; + + if ((ret = m920x_write(d->udev, M9206_FILTER, pid, (type << 8) | (idx * 4) )) != 0) + return ret; + + if ((ret = m920x_write(d->udev, M9206_FILTER, 0, (type << 8) | (idx * 4) )) != 0) + return ret; + + return ret; +} + +static int m920x_update_filters(struct dvb_usb_adapter *adap) +{ + struct m920x_state *m = adap->dev->priv; + int enabled = m->filtering_enabled[adap->id]; + int i, ret = 0, filter = 0; + int ep = adap->props.fe[0].stream.endpoint; + + for (i = 0; i < M9206_MAX_FILTERS; i++) + if (m->filters[adap->id][i] == 8192) + enabled = 0; + + /* Disable all filters */ + if ((ret = m920x_set_filter(adap->dev, ep, 1, enabled)) != 0) + return ret; + + for (i = 0; i < M9206_MAX_FILTERS; i++) + if ((ret = m920x_set_filter(adap->dev, ep, i + 2, 0)) != 0) + return ret; + + /* Set */ + if (enabled) { + for (i = 0; i < M9206_MAX_FILTERS; i++) { + if (m->filters[adap->id][i] == 0) + continue; + + if ((ret = m920x_set_filter(adap->dev, ep, filter + 2, m->filters[adap->id][i])) != 0) + return ret; + + filter++; + } + } + + return ret; +} + +static int m920x_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + struct m920x_state *m = adap->dev->priv; + + m->filtering_enabled[adap->id] = onoff ? 1 : 0; + + return m920x_update_filters(adap); +} + +static int m920x_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) +{ + struct m920x_state *m = adap->dev->priv; + + m->filters[adap->id][index] = onoff ? pid : 0; + + return m920x_update_filters(adap); +} + +static int m920x_firmware_download(struct usb_device *udev, const struct firmware *fw) +{ + u16 value, index, size; + u8 *read, *buff; + int i, pass, ret = 0; + + buff = kmalloc(65536, GFP_KERNEL); + if (buff == NULL) + return -ENOMEM; + + read = kmalloc(4, GFP_KERNEL); + if (!read) { + kfree(buff); + return -ENOMEM; + } + + if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0) + goto done; + deb("%x %x %x %x\n", read[0], read[1], read[2], read[3]); + + if ((ret = m920x_read(udev, M9206_FW, 0x0, 0x0, read, 1)) != 0) + goto done; + deb("%x\n", read[0]); + + for (pass = 0; pass < 2; pass++) { + for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { + value = get_unaligned_le16(fw->data + i); + i += sizeof(u16); + + index = get_unaligned_le16(fw->data + i); + i += sizeof(u16); + + size = get_unaligned_le16(fw->data + i); + i += sizeof(u16); + + if (pass == 1) { + /* Will stall if using fw->data ... */ + memcpy(buff, fw->data + i, size); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev,0), + M9206_FW, + USB_TYPE_VENDOR | USB_DIR_OUT, + value, index, buff, size, 20); + if (ret != size) { + deb("error while uploading fw!\n"); + ret = -EIO; + goto done; + } + msleep(3); + } + i += size; + } + if (i != fw->size) { + deb("bad firmware file!\n"); + ret = -EINVAL; + goto done; + } + } + + msleep(36); + + /* m920x will disconnect itself from the bus after this. */ + (void) m920x_write(udev, M9206_CORE, 0x01, M9206_FW_GO); + deb("firmware uploaded!\n"); + + done: + kfree(read); + kfree(buff); + + return ret; +} + +/* Callbacks for DVB USB */ +static int m920x_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + struct usb_host_interface *alt; + + alt = usb_altnum_to_altsetting(usb_ifnum_to_if(udev, 0), 1); + *cold = (alt == NULL) ? 1 : 0; + + return 0; +} + +/* demod configurations */ +static int m920x_mt352_demod_init(struct dvb_frontend *fe) +{ + int ret; + u8 config[] = { CONFIG, 0x3d }; + u8 clock[] = { CLOCK_CTL, 0x30 }; + u8 reset[] = { RESET, 0x80 }; + u8 adc_ctl[] = { ADC_CTL_1, 0x40 }; + u8 agc[] = { AGC_TARGET, 0x1c, 0x20 }; + u8 sec_agc[] = { 0x69, 0x00, 0xff, 0xff, 0x40, 0xff, 0x00, 0x40, 0x40 }; + u8 unk1[] = { 0x93, 0x1a }; + u8 unk2[] = { 0xb5, 0x7a }; + + deb("Demod init!\n"); + + if ((ret = mt352_write(fe, config, ARRAY_SIZE(config))) != 0) + return ret; + if ((ret = mt352_write(fe, clock, ARRAY_SIZE(clock))) != 0) + return ret; + if ((ret = mt352_write(fe, reset, ARRAY_SIZE(reset))) != 0) + return ret; + if ((ret = mt352_write(fe, adc_ctl, ARRAY_SIZE(adc_ctl))) != 0) + return ret; + if ((ret = mt352_write(fe, agc, ARRAY_SIZE(agc))) != 0) + return ret; + if ((ret = mt352_write(fe, sec_agc, ARRAY_SIZE(sec_agc))) != 0) + return ret; + if ((ret = mt352_write(fe, unk1, ARRAY_SIZE(unk1))) != 0) + return ret; + if ((ret = mt352_write(fe, unk2, ARRAY_SIZE(unk2))) != 0) + return ret; + + return 0; +} + +static struct mt352_config m920x_mt352_config = { + .demod_address = 0x0f, + .no_tuner = 1, + .demod_init = m920x_mt352_demod_init, +}; + +static struct tda1004x_config m920x_tda10046_08_config = { + .demod_address = 0x08, + .invert = 0, + .invert_oclk = 0, + .ts_mode = TDA10046_TS_SERIAL, + .xtal_freq = TDA10046_XTAL_16M, + .if_freq = TDA10046_FREQ_045, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GPTRI, + .request_firmware = NULL, +}; + +static struct tda1004x_config m920x_tda10046_0b_config = { + .demod_address = 0x0b, + .invert = 0, + .invert_oclk = 0, + .ts_mode = TDA10046_TS_SERIAL, + .xtal_freq = TDA10046_XTAL_16M, + .if_freq = TDA10046_FREQ_045, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GPTRI, + .request_firmware = NULL, /* uses firmware EEPROM */ +}; + +/* tuner configurations */ +static struct qt1010_config m920x_qt1010_config = { + .i2c_address = 0x62 +}; + +/* Callbacks for DVB USB */ +static int m920x_mt352_frontend_attach(struct dvb_usb_adapter *adap) +{ + deb("%s\n",__func__); + + adap->fe_adap[0].fe = dvb_attach(mt352_attach, + &m920x_mt352_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) == NULL) + return -EIO; + + return 0; +} + +static int m920x_tda10046_08_frontend_attach(struct dvb_usb_adapter *adap) +{ + deb("%s\n",__func__); + + adap->fe_adap[0].fe = dvb_attach(tda10046_attach, + &m920x_tda10046_08_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) == NULL) + return -EIO; + + return 0; +} + +static int m920x_tda10046_0b_frontend_attach(struct dvb_usb_adapter *adap) +{ + deb("%s\n",__func__); + + adap->fe_adap[0].fe = dvb_attach(tda10046_attach, + &m920x_tda10046_0b_config, + &adap->dev->i2c_adap); + if ((adap->fe_adap[0].fe) == NULL) + return -EIO; + + return 0; +} + +static int m920x_qt1010_tuner_attach(struct dvb_usb_adapter *adap) +{ + deb("%s\n",__func__); + + if (dvb_attach(qt1010_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, &m920x_qt1010_config) == NULL) + return -ENODEV; + + return 0; +} + +static int m920x_tda8275_60_tuner_attach(struct dvb_usb_adapter *adap) +{ + deb("%s\n",__func__); + + if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, NULL) == NULL) + return -ENODEV; + + return 0; +} + +static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap) +{ + deb("%s\n",__func__); + + if (dvb_attach(tda827x_attach, adap->fe_adap[0].fe, 0x61, &adap->dev->i2c_adap, NULL) == NULL) + return -ENODEV; + + return 0; +} + +static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach(simple_tuner_attach, adap->fe_adap[0].fe, + &adap->dev->i2c_adap, 0x61, + TUNER_PHILIPS_FMD1216ME_MK3); + return 0; +} + +/* device-specific initialization */ +static struct m920x_inits megasky_rc_init [] = { + { M9206_RC_INIT2, 0xa8 }, + { M9206_RC_INIT1, 0x51 }, + { } /* terminating entry */ +}; + +static struct m920x_inits tvwalkertwin_rc_init [] = { + { M9206_RC_INIT2, 0x00 }, + { M9206_RC_INIT1, 0xef }, + { 0xff28, 0x00 }, + { 0xff23, 0x00 }, + { 0xff21, 0x30 }, + { } /* terminating entry */ +}; + +static struct m920x_inits pinnacle310e_init[] = { + /* without these the tuner don't work */ + { 0xff20, 0x9b }, + { 0xff22, 0x70 }, + + /* rc settings */ + { 0xff50, 0x80 }, + { M9206_RC_INIT1, 0x00 }, + { M9206_RC_INIT2, 0xff }, + { } /* terminating entry */ +}; + +/* ir keymaps */ +static struct rc_map_table rc_map_megasky_table[] = { + { 0x0012, KEY_POWER }, + { 0x001e, KEY_CYCLEWINDOWS }, /* min/max */ + { 0x0002, KEY_CHANNELUP }, + { 0x0005, KEY_CHANNELDOWN }, + { 0x0003, KEY_VOLUMEUP }, + { 0x0006, KEY_VOLUMEDOWN }, + { 0x0004, KEY_MUTE }, + { 0x0007, KEY_OK }, /* TS */ + { 0x0008, KEY_STOP }, + { 0x0009, KEY_MENU }, /* swap */ + { 0x000a, KEY_REWIND }, + { 0x001b, KEY_PAUSE }, + { 0x001f, KEY_FASTFORWARD }, + { 0x000c, KEY_RECORD }, + { 0x000d, KEY_CAMERA }, /* screenshot */ + { 0x000e, KEY_COFFEE }, /* "MTS" */ +}; + +static struct rc_map_table rc_map_tvwalkertwin_table[] = { + { 0x0001, KEY_ZOOM }, /* Full Screen */ + { 0x0002, KEY_CAMERA }, /* snapshot */ + { 0x0003, KEY_MUTE }, + { 0x0004, KEY_REWIND }, + { 0x0005, KEY_PLAYPAUSE }, /* Play/Pause */ + { 0x0006, KEY_FASTFORWARD }, + { 0x0007, KEY_RECORD }, + { 0x0008, KEY_STOP }, + { 0x0009, KEY_TIME }, /* Timeshift */ + { 0x000c, KEY_COFFEE }, /* Recall */ + { 0x000e, KEY_CHANNELUP }, + { 0x0012, KEY_POWER }, + { 0x0015, KEY_MENU }, /* source */ + { 0x0018, KEY_CYCLEWINDOWS }, /* TWIN PIP */ + { 0x001a, KEY_CHANNELDOWN }, + { 0x001b, KEY_VOLUMEDOWN }, + { 0x001e, KEY_VOLUMEUP }, +}; + +static struct rc_map_table rc_map_pinnacle310e_table[] = { + { 0x16, KEY_POWER }, + { 0x17, KEY_FAVORITES }, + { 0x0f, KEY_TEXT }, + { 0x48, KEY_PROGRAM }, /* preview */ + { 0x1c, KEY_EPG }, + { 0x04, KEY_LIST }, /* record list */ + { 0x03, KEY_1 }, + { 0x01, KEY_2 }, + { 0x06, KEY_3 }, + { 0x09, KEY_4 }, + { 0x1d, KEY_5 }, + { 0x1f, KEY_6 }, + { 0x0d, KEY_7 }, + { 0x19, KEY_8 }, + { 0x1b, KEY_9 }, + { 0x15, KEY_0 }, + { 0x0c, KEY_CANCEL }, + { 0x4a, KEY_CLEAR }, + { 0x13, KEY_BACK }, + { 0x00, KEY_TAB }, + { 0x4b, KEY_UP }, + { 0x4e, KEY_LEFT }, + { 0x52, KEY_RIGHT }, + { 0x51, KEY_DOWN }, + { 0x4f, KEY_ENTER }, /* could also be KEY_OK */ + { 0x1e, KEY_VOLUMEUP }, + { 0x0a, KEY_VOLUMEDOWN }, + { 0x05, KEY_CHANNELUP }, + { 0x02, KEY_CHANNELDOWN }, + { 0x11, KEY_RECORD }, + { 0x14, KEY_PLAY }, + { 0x4c, KEY_PAUSE }, + { 0x1a, KEY_STOP }, + { 0x40, KEY_REWIND }, + { 0x12, KEY_FASTFORWARD }, + { 0x41, KEY_PREVIOUSSONG }, /* Replay */ + { 0x42, KEY_NEXTSONG }, /* Skip */ + { 0x54, KEY_CAMERA }, /* Capture */ +/* { 0x50, KEY_SAP }, */ /* Sap */ + { 0x47, KEY_CYCLEWINDOWS }, /* Pip */ + { 0x4d, KEY_SCREEN }, /* FullScreen */ + { 0x08, KEY_SUBTITLE }, + { 0x0e, KEY_MUTE }, +/* { 0x49, KEY_LR }, */ /* L/R */ + { 0x07, KEY_SLEEP }, /* Hibernate */ + { 0x08, KEY_VIDEO }, /* A/V */ + { 0x0e, KEY_MENU }, /* Recall */ + { 0x45, KEY_ZOOMIN }, + { 0x46, KEY_ZOOMOUT }, + { 0x18, KEY_RED }, /* Red */ + { 0x53, KEY_GREEN }, /* Green */ + { 0x5e, KEY_YELLOW }, /* Yellow */ + { 0x5f, KEY_BLUE }, /* Blue */ +}; + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties megasky_properties; +static struct dvb_usb_device_properties digivox_mini_ii_properties; +static struct dvb_usb_device_properties tvwalkertwin_properties; +static struct dvb_usb_device_properties dposh_properties; +static struct dvb_usb_device_properties pinnacle_pctv310e_properties; + +static int m920x_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d = NULL; + int ret; + struct m920x_inits *rc_init_seq = NULL; + int bInterfaceNumber = intf->cur_altsetting->desc.bInterfaceNumber; + + deb("Probing for m920x device at interface %d\n", bInterfaceNumber); + + if (bInterfaceNumber == 0) { + /* Single-tuner device, or first interface on + * multi-tuner device + */ + + ret = dvb_usb_device_init(intf, &megasky_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { + rc_init_seq = megasky_rc_init; + goto found; + } + + ret = dvb_usb_device_init(intf, &digivox_mini_ii_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { + /* No remote control, so no rc_init_seq */ + goto found; + } + + /* This configures both tuners on the TV Walker Twin */ + ret = dvb_usb_device_init(intf, &tvwalkertwin_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { + rc_init_seq = tvwalkertwin_rc_init; + goto found; + } + + ret = dvb_usb_device_init(intf, &dposh_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { + /* Remote controller not supported yet. */ + goto found; + } + + ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) { + rc_init_seq = pinnacle310e_init; + goto found; + } + + return ret; + } else { + /* Another interface on a multi-tuner device */ + + /* The LifeView TV Walker Twin gets here, but struct + * tvwalkertwin_properties already configured both + * tuners, so there is nothing for us to do here + */ + } + + found: + if ((ret = m920x_init_ep(intf)) < 0) + return ret; + + if (d && (ret = m920x_init(d, rc_init_seq)) != 0) + return ret; + + return ret; +} + +static struct usb_device_id m920x_table [] = { + { USB_DEVICE(USB_VID_MSI, USB_PID_MSI_MEGASKY580) }, + { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, + USB_PID_MSI_DIGI_VOX_MINI_II) }, + { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, + USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD) }, + { USB_DEVICE(USB_VID_ANUBIS_ELECTRONIC, + USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) }, + { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) }, + { USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, m920x_table); + +static struct dvb_usb_device_properties megasky_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-megasky-02.fw", + .download_firmware = m920x_firmware_download, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_megasky_table, + .rc_map_size = ARRAY_SIZE(rc_map_megasky_table), + .rc_query = m920x_rc_query, + }, + + .size_of_priv = sizeof(struct m920x_state), + + .identify_state = m920x_identify_state, + .num_adapters = 1, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 8, + .pid_filter = m920x_pid_filter, + .pid_filter_ctrl = m920x_pid_filter_ctrl, + + .frontend_attach = m920x_mt352_frontend_attach, + .tuner_attach = m920x_qt1010_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + }}, + }}, + .i2c_algo = &m920x_i2c_algo, + + .num_device_descs = 1, + .devices = { + { "MSI Mega Sky 580 DVB-T USB2.0", + { &m920x_table[0], NULL }, + { NULL }, + } + } +}; + +static struct dvb_usb_device_properties digivox_mini_ii_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-digivox-02.fw", + .download_firmware = m920x_firmware_download, + + .size_of_priv = sizeof(struct m920x_state), + + .identify_state = m920x_identify_state, + .num_adapters = 1, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 8, + .pid_filter = m920x_pid_filter, + .pid_filter_ctrl = m920x_pid_filter_ctrl, + + .frontend_attach = m920x_tda10046_08_frontend_attach, + .tuner_attach = m920x_tda8275_60_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 0x4000, + } + } + }, + }}, + }}, + .i2c_algo = &m920x_i2c_algo, + + .num_device_descs = 1, + .devices = { + { "MSI DIGI VOX mini II DVB-T USB2.0", + { &m920x_table[1], NULL }, + { NULL }, + }, + } +}; + +/* LifeView TV Walker Twin support by Nick Andrew <nick@nick-andrew.net> + * + * LifeView TV Walker Twin has 1 x M9206, 2 x TDA10046, 2 x TDA8275A + * TDA10046 #0 is located at i2c address 0x08 + * TDA10046 #1 is located at i2c address 0x0b + * TDA8275A #0 is located at i2c address 0x60 + * TDA8275A #1 is located at i2c address 0x61 + */ +static struct dvb_usb_device_properties tvwalkertwin_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-tvwalkert.fw", + .download_firmware = m920x_firmware_download, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_tvwalkertwin_table, + .rc_map_size = ARRAY_SIZE(rc_map_tvwalkertwin_table), + .rc_query = m920x_rc_query, + }, + + .size_of_priv = sizeof(struct m920x_state), + + .identify_state = m920x_identify_state, + .num_adapters = 2, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 8, + .pid_filter = m920x_pid_filter, + .pid_filter_ctrl = m920x_pid_filter_ctrl, + + .frontend_attach = m920x_tda10046_08_frontend_attach, + .tuner_attach = m920x_tda8275_60_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 512, + } + } + }}, + }},{ + .num_frontends = 1, + .fe = {{ + + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 8, + .pid_filter = m920x_pid_filter, + .pid_filter_ctrl = m920x_pid_filter_ctrl, + + .frontend_attach = m920x_tda10046_0b_frontend_attach, + .tuner_attach = m920x_tda8275_61_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 512, + } + } + }}, + }, + }}, + .i2c_algo = &m920x_i2c_algo, + + .num_device_descs = 1, + .devices = { + { .name = "LifeView TV Walker Twin DVB-T USB2.0", + .cold_ids = { &m920x_table[2], NULL }, + .warm_ids = { &m920x_table[3], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties dposh_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .firmware = "dvb-usb-dposh-01.fw", + .download_firmware = m920x_firmware_download, + + .size_of_priv = sizeof(struct m920x_state), + + .identify_state = m920x_identify_state, + .num_adapters = 1, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + /* Hardware pid filters don't work with this device/firmware */ + + .frontend_attach = m920x_mt352_frontend_attach, + .tuner_attach = m920x_qt1010_tuner_attach, + + .stream = { + .type = USB_BULK, + .count = 8, + .endpoint = 0x81, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + }}, + }}, + .i2c_algo = &m920x_i2c_algo, + + .num_device_descs = 1, + .devices = { + { .name = "Dposh DVB-T USB2.0", + .cold_ids = { &m920x_table[4], NULL }, + .warm_ids = { &m920x_table[5], NULL }, + }, + } +}; + +static struct dvb_usb_device_properties pinnacle_pctv310e_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = NULL, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_pinnacle310e_table, + .rc_map_size = ARRAY_SIZE(rc_map_pinnacle310e_table), + .rc_query = m920x_rc_query, + }, + + .size_of_priv = sizeof(struct m920x_state), + + .identify_state = m920x_identify_state, + .num_adapters = 1, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 8, + .pid_filter = m920x_pid_filter, + .pid_filter_ctrl = m920x_pid_filter_ctrl, + + .frontend_attach = m920x_mt352_frontend_attach, + .tuner_attach = m920x_fmd1216me_tuner_attach, + + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x84, + .u = { + .isoc = { + .framesperurb = 128, + .framesize = 564, + .interval = 1, + } + } + }, + }}, + } }, + .i2c_algo = &m920x_i2c_algo, + + .num_device_descs = 1, + .devices = { + { "Pinnacle PCTV 310e", + { &m920x_table[6], NULL }, + { NULL }, + } + } +}; + +static struct usb_driver m920x_driver = { + .name = "dvb_usb_m920x", + .probe = m920x_probe, + .disconnect = dvb_usb_device_exit, + .id_table = m920x_table, +}; + +module_usb_driver(m920x_driver); + +MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>"); +MODULE_DESCRIPTION("DVB Driver for ULI M920x"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-basic-offset: 8 + */ diff --git a/drivers/media/usb/dvb-usb/m920x.h b/drivers/media/usb/dvb-usb/m920x.h new file mode 100644 index 000000000000..3c061518ffc1 --- /dev/null +++ b/drivers/media/usb/dvb-usb/m920x.h @@ -0,0 +1,77 @@ +#ifndef _DVB_USB_M920X_H_ +#define _DVB_USB_M920X_H_ + +#define DVB_USB_LOG_PREFIX "m920x" +#include "dvb-usb.h" + +#define deb(args...) dprintk(dvb_usb_m920x_debug,0x01,args) + +#define M9206_CORE 0x22 +#define M9206_RC_STATE 0xff51 +#define M9206_RC_KEY 0xff52 +#define M9206_RC_INIT1 0xff54 +#define M9206_RC_INIT2 0xff55 +#define M9206_FW_GO 0xff69 + +#define M9206_I2C 0x23 +#define M9206_FILTER 0x25 +#define M9206_FW 0x30 + +#define M9206_MAX_FILTERS 8 +#define M9206_MAX_ADAPTERS 4 + +/* +sequences found in logs: +[index value] +0x80 write addr +(0x00 out byte)* +0x40 out byte + +0x80 write addr +(0x00 out byte)* +0x80 read addr +(0x21 in byte)* +0x60 in byte + +this sequence works: +0x80 read addr +(0x21 in byte)* +0x60 in byte + +Guess at API of the I2C function: +I2C operation is done one byte at a time with USB control messages. The +index the messages is sent to is made up of a set of flags that control +the I2C bus state: +0x80: Send START condition. After a START condition, one would normally + always send the 7-bit slave I2C address as the 7 MSB, followed by + the read/write bit as the LSB. +0x40: Send STOP condition. This should be set on the last byte of an + I2C transaction. +0x20: Read a byte from the slave. As opposed to writing a byte to the + slave. The slave will normally not produce any data unless you + set the R/W bit to 1 when sending the slave's address after the + START condition. +0x01: Respond with ACK, as opposed to a NACK. For a multi-byte read, + the master should send an ACK, that is pull SDA low during the 9th + clock cycle, after every byte but the last. This flags only makes + sense when bit 0x20 is set, indicating a read. + +What any other bits might mean, or how to get the slave's ACK/NACK +response to a write, is unknown. +*/ + +struct m920x_state { + u16 filters[M9206_MAX_ADAPTERS][M9206_MAX_FILTERS]; + int filtering_enabled[M9206_MAX_ADAPTERS]; + int rep_count; +}; + +/* Initialisation data for the m920x + */ + +struct m920x_inits { + u16 address; + u8 data; +}; + +#endif diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c new file mode 100644 index 000000000000..6c55384e2fca --- /dev/null +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -0,0 +1,233 @@ +/* DVB USB framework compliant Linux driver for the Hauppauge WinTV-NOVA-T usb2 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define deb_rc(args...) dprintk(debug,0x01,args) +#define deb_ee(args...) dprintk(debug,0x02,args) + +/* Hauppauge NOVA-T USB2 keys */ +static struct rc_map_table rc_map_haupp_table[] = { + { 0x1e00, KEY_0 }, + { 0x1e01, KEY_1 }, + { 0x1e02, KEY_2 }, + { 0x1e03, KEY_3 }, + { 0x1e04, KEY_4 }, + { 0x1e05, KEY_5 }, + { 0x1e06, KEY_6 }, + { 0x1e07, KEY_7 }, + { 0x1e08, KEY_8 }, + { 0x1e09, KEY_9 }, + { 0x1e0a, KEY_KPASTERISK }, + { 0x1e0b, KEY_RED }, + { 0x1e0c, KEY_RADIO }, + { 0x1e0d, KEY_MENU }, + { 0x1e0e, KEY_GRAVE }, /* # */ + { 0x1e0f, KEY_MUTE }, + { 0x1e10, KEY_VOLUMEUP }, + { 0x1e11, KEY_VOLUMEDOWN }, + { 0x1e12, KEY_CHANNEL }, + { 0x1e14, KEY_UP }, + { 0x1e15, KEY_DOWN }, + { 0x1e16, KEY_LEFT }, + { 0x1e17, KEY_RIGHT }, + { 0x1e18, KEY_VIDEO }, + { 0x1e19, KEY_AUDIO }, + { 0x1e1a, KEY_IMAGES }, + { 0x1e1b, KEY_EPG }, + { 0x1e1c, KEY_TV }, + { 0x1e1e, KEY_NEXT }, + { 0x1e1f, KEY_BACK }, + { 0x1e20, KEY_CHANNELUP }, + { 0x1e21, KEY_CHANNELDOWN }, + { 0x1e24, KEY_LAST }, /* Skip backwards */ + { 0x1e25, KEY_OK }, + { 0x1e29, KEY_BLUE}, + { 0x1e2e, KEY_GREEN }, + { 0x1e30, KEY_PAUSE }, + { 0x1e32, KEY_REWIND }, + { 0x1e34, KEY_FASTFORWARD }, + { 0x1e35, KEY_PLAY }, + { 0x1e36, KEY_STOP }, + { 0x1e37, KEY_RECORD }, + { 0x1e38, KEY_YELLOW }, + { 0x1e3b, KEY_GOTO }, + { 0x1e3d, KEY_POWER }, +}; + +/* Firmware bug? sometimes, when a new key is pressed, the previous pressed key + * is delivered. No workaround yet, maybe a new firmware. + */ +static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom; + u16 raw; + int i; + struct dibusb_device_state *st = d->priv; + + dvb_usb_generic_rw(d,cmd,2,key,5,0); + + *state = REMOTE_NO_KEY_PRESSED; + switch (key[0]) { + case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: + raw = ((key[1] << 8) | key[2]) >> 3; + toggle = !!(raw & 0x800); + data = raw & 0x3f; + custom = (raw >> 6) & 0x1f; + + deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle); + + for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) { + if (rc5_data(&rc_map_haupp_table[i]) == data && + rc5_custom(&rc_map_haupp_table[i]) == custom) { + + deb_rc("c: %x, d: %x\n", rc5_data(&rc_map_haupp_table[i]), + rc5_custom(&rc_map_haupp_table[i])); + + *event = rc_map_haupp_table[i].keycode; + *state = REMOTE_KEY_PRESSED; + if (st->old_toggle == toggle) { + if (st->last_repeat_count++ < 2) + *state = REMOTE_NO_KEY_PRESSED; + } else { + st->last_repeat_count = 0; + st->old_toggle = toggle; + } + break; + } + } + + break; + case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY: + default: + break; + } + + return 0; +} + +static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6]) +{ + int i; + u8 b; + + mac[0] = 0x00; + mac[1] = 0x0d; + mac[2] = 0xfe; + + /* this is a complete guess, but works for my box */ + for (i = 136; i < 139; i++) { + dibusb_read_eeprom_byte(d,i, &b); + + mac[5 - (i - 136)] = b; + } + + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_device_properties nova_t_properties; + +static int nova_t_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &nova_t_properties, + THIS_MODULE, NULL, adapter_nr); +} + +/* do not change the order of the ID table */ +static struct usb_device_id nova_t_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, nova_t_table); + +static struct dvb_usb_device_properties nova_t_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-nova-t-usb2-02.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + } + }, + .size_of_priv = sizeof(struct dibusb_device_state), + + .power_ctrl = dibusb2_0_power_ctrl, + .read_mac_address = nova_t_read_mac_address, + + .rc.legacy = { + .rc_interval = 100, + .rc_map_table = rc_map_haupp_table, + .rc_map_size = ARRAY_SIZE(rc_map_haupp_table), + .rc_query = nova_t_rc_query, + }, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Hauppauge WinTV-NOVA-T usb2", + { &nova_t_table[0], NULL }, + { &nova_t_table[1], NULL }, + }, + { NULL }, + } +}; + +static struct usb_driver nova_t_driver = { + .name = "dvb_usb_nova_t_usb2", + .probe = nova_t_probe, + .disconnect = dvb_usb_device_exit, + .id_table = nova_t_table, +}; + +module_usb_driver(nova_t_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Hauppauge WinTV-NOVA-T usb2"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c new file mode 100644 index 000000000000..c8a95042dfbc --- /dev/null +++ b/drivers/media/usb/dvb-usb/opera1.c @@ -0,0 +1,583 @@ +/* DVB USB framework compliant Linux driver for the Opera1 DVB-S Card +* +* Copyright (C) 2006 Mario Hlawitschka (dh1pa@amsat.org) +* Copyright (C) 2006 Marco Gittler (g.marco@freenet.de) +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the Free +* Software Foundation, version 2. +* +* see Documentation/dvb/README.dvb-usb for more information +*/ + +#define DVB_USB_LOG_PREFIX "opera" + +#include "dvb-usb.h" +#include "stv0299.h" + +#define OPERA_READ_MSG 0 +#define OPERA_WRITE_MSG 1 +#define OPERA_I2C_TUNER 0xd1 + +#define READ_FX2_REG_REQ 0xba +#define READ_MAC_ADDR 0x08 +#define OPERA_WRITE_FX2 0xbb +#define OPERA_TUNER_REQ 0xb1 +#define REG_1F_SYMBOLRATE_BYTE0 0x1f +#define REG_20_SYMBOLRATE_BYTE1 0x20 +#define REG_21_SYMBOLRATE_BYTE2 0x21 + +#define ADDR_B600_VOLTAGE_13V (0x02) +#define ADDR_B601_VOLTAGE_18V (0x03) +#define ADDR_B1A6_STREAM_CTRL (0x04) +#define ADDR_B880_READ_REMOTE (0x05) + +struct opera1_state { + u32 last_key_pressed; +}; +struct rc_map_opera_table { + u32 keycode; + u32 event; +}; + +static int dvb_usb_opera1_debug; +module_param_named(debug, dvb_usb_opera1_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." + DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + + +static int opera1_xilinx_rw(struct usb_device *dev, u8 request, u16 value, + u8 * data, u16 len, int flags) +{ + int ret; + u8 tmp; + u8 *buf; + unsigned int pipe = (flags == OPERA_READ_MSG) ? + usb_rcvctrlpipe(dev,0) : usb_sndctrlpipe(dev, 0); + u8 request_type = (flags == OPERA_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT; + + buf = kmalloc(len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (flags == OPERA_WRITE_MSG) + memcpy(buf, data, len); + ret = usb_control_msg(dev, pipe, request, + request_type | USB_TYPE_VENDOR, value, 0x0, + buf, len, 2000); + + if (request == OPERA_TUNER_REQ) { + tmp = buf[0]; + if (usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + OPERA_TUNER_REQ, USB_DIR_IN | USB_TYPE_VENDOR, + 0x01, 0x0, buf, 1, 2000) < 1 || buf[0] != 0x08) { + ret = 0; + goto out; + } + buf[0] = tmp; + } + if (flags == OPERA_READ_MSG) + memcpy(data, buf, len); +out: + kfree(buf); + return ret; +} + +/* I2C */ + +static int opera1_usb_i2c_msgxfer(struct dvb_usb_device *dev, u16 addr, + u8 * buf, u16 len) +{ + int ret = 0; + u8 request; + u16 value; + + if (!dev) { + info("no usb_device"); + return -EINVAL; + } + if (mutex_lock_interruptible(&dev->usb_mutex) < 0) + return -EAGAIN; + + switch (addr>>1){ + case ADDR_B600_VOLTAGE_13V: + request=0xb6; + value=0x00; + break; + case ADDR_B601_VOLTAGE_18V: + request=0xb6; + value=0x01; + break; + case ADDR_B1A6_STREAM_CTRL: + request=0xb1; + value=0xa6; + break; + case ADDR_B880_READ_REMOTE: + request=0xb8; + value=0x80; + break; + default: + request=0xb1; + value=addr; + } + ret = opera1_xilinx_rw(dev->udev, request, + value, buf, len, + addr&0x01?OPERA_READ_MSG:OPERA_WRITE_MSG); + + mutex_unlock(&dev->usb_mutex); + return ret; +} + +static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i = 0, tmp = 0; + + if (!d) + return -ENODEV; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if ((tmp = opera1_usb_i2c_msgxfer(d, + (msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0), + msg[i].buf, + msg[i].len + )) != msg[i].len) { + break; + } + if (dvb_usb_opera1_debug & 0x10) + info("sending i2c mesage %d %d", tmp, msg[i].len); + } + mutex_unlock(&d->i2c_mutex); + return num; +} + +static u32 opera1_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm opera1_i2c_algo = { + .master_xfer = opera1_i2c_xfer, + .functionality = opera1_i2c_func, +}; + +static int opera1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + static u8 command_13v[1]={0x00}; + static u8 command_18v[1]={0x01}; + struct i2c_msg msg[] = { + {.addr = ADDR_B600_VOLTAGE_13V,.flags = 0,.buf = command_13v,.len = 1}, + }; + struct dvb_usb_adapter *udev_adap = + (struct dvb_usb_adapter *)(fe->dvb->priv); + if (voltage == SEC_VOLTAGE_18) { + msg[0].addr = ADDR_B601_VOLTAGE_18V; + msg[0].buf = command_18v; + } + i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1); + return 0; +} + +static int opera1_stv0299_set_symbol_rate(struct dvb_frontend *fe, u32 srate, + u32 ratio) +{ + stv0299_writereg(fe, 0x13, 0x98); + stv0299_writereg(fe, 0x14, 0x95); + stv0299_writereg(fe, REG_1F_SYMBOLRATE_BYTE0, (ratio >> 16) & 0xff); + stv0299_writereg(fe, REG_20_SYMBOLRATE_BYTE1, (ratio >> 8) & 0xff); + stv0299_writereg(fe, REG_21_SYMBOLRATE_BYTE2, (ratio) & 0xf0); + return 0; + +} +static u8 opera1_inittab[] = { + 0x00, 0xa1, + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, + 0x05, 0x05, + 0x06, 0x02, + 0x07, 0x00, + 0x0b, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x19, + 0x10, 0x3f, + 0x11, 0x84, + 0x12, 0xda, + 0x13, 0x98, + 0x14, 0x95, + 0x15, 0xc9, + 0x16, 0xeb, + 0x17, 0x00, + 0x18, 0x19, + 0x19, 0x8b, + 0x1a, 0x00, + 0x1b, 0x82, + 0x1c, 0x7f, + 0x1d, 0x00, + 0x1e, 0x00, + REG_1F_SYMBOLRATE_BYTE0, 0x06, + REG_20_SYMBOLRATE_BYTE1, 0x50, + REG_21_SYMBOLRATE_BYTE2, 0x10, + 0x22, 0x00, + 0x23, 0x00, + 0x24, 0x37, + 0x25, 0xbc, + 0x26, 0x00, + 0x27, 0x00, + 0x28, 0x00, + 0x29, 0x1e, + 0x2a, 0x14, + 0x2b, 0x1f, + 0x2c, 0x09, + 0x2d, 0x0a, + 0x2e, 0x00, + 0x2f, 0x00, + 0x30, 0x00, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +static struct stv0299_config opera1_stv0299_config = { + .demod_address = 0xd0>>1, + .min_delay_ms = 100, + .mclk = 88000000UL, + .invert = 1, + .skip_reinit = 0, + .lock_output = STV0299_LOCKOUTPUT_0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .inittab = opera1_inittab, + .set_symbol_rate = opera1_stv0299_set_symbol_rate, +}; + +static int opera1_frontend_attach(struct dvb_usb_adapter *d) +{ + d->fe_adap[0].fe = dvb_attach(stv0299_attach, &opera1_stv0299_config, + &d->dev->i2c_adap); + if ((d->fe_adap[0].fe) != NULL) { + d->fe_adap[0].fe->ops.set_voltage = opera1_set_voltage; + return 0; + } + info("not attached stv0299"); + return -EIO; +} + +static int opera1_tuner_attach(struct dvb_usb_adapter *adap) +{ + dvb_attach( + dvb_pll_attach, adap->fe_adap[0].fe, 0xc0>>1, + &adap->dev->i2c_adap, DVB_PLL_OPERA1 + ); + return 0; +} + +static int opera1_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 val = onoff ? 0x01 : 0x00; + + if (dvb_usb_opera1_debug) + info("power %s", onoff ? "on" : "off"); + return opera1_xilinx_rw(d->udev, 0xb7, val, + &val, 1, OPERA_WRITE_MSG); +} + +static int opera1_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + static u8 buf_start[2] = { 0xff, 0x03 }; + static u8 buf_stop[2] = { 0xff, 0x00 }; + struct i2c_msg start_tuner[] = { + {.addr = ADDR_B1A6_STREAM_CTRL,.buf = onoff ? buf_start : buf_stop,.len = 2}, + }; + if (dvb_usb_opera1_debug) + info("streaming %s", onoff ? "on" : "off"); + i2c_transfer(&adap->dev->i2c_adap, start_tuner, 1); + return 0; +} + +static int opera1_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + u8 b_pid[3]; + struct i2c_msg msg[] = { + {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, + }; + if (dvb_usb_opera1_debug) + info("pidfilter index: %d pid: %d %s", index, pid, + onoff ? "on" : "off"); + b_pid[0] = (2 * index) + 4; + b_pid[1] = onoff ? (pid & 0xff) : (0x00); + b_pid[2] = onoff ? ((pid >> 8) & 0xff) : (0x00); + i2c_transfer(&adap->dev->i2c_adap, msg, 1); + return 0; +} + +static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff) +{ + int u = 0x04; + u8 b_pid[3]; + struct i2c_msg msg[] = { + {.addr = ADDR_B1A6_STREAM_CTRL,.buf = b_pid,.len = 3}, + }; + if (dvb_usb_opera1_debug) + info("%s hw-pidfilter", onoff ? "enable" : "disable"); + for (; u < 0x7e; u += 2) { + b_pid[0] = u; + b_pid[1] = 0; + b_pid[2] = 0x80; + i2c_transfer(&adap->dev->i2c_adap, msg, 1); + } + return 0; +} + +static struct rc_map_table rc_map_opera1_table[] = { + {0x5fa0, KEY_1}, + {0x51af, KEY_2}, + {0x5da2, KEY_3}, + {0x41be, KEY_4}, + {0x0bf5, KEY_5}, + {0x43bd, KEY_6}, + {0x47b8, KEY_7}, + {0x49b6, KEY_8}, + {0x05fa, KEY_9}, + {0x45ba, KEY_0}, + {0x09f6, KEY_CHANNELUP}, /*chanup */ + {0x1be5, KEY_CHANNELDOWN}, /*chandown */ + {0x5da3, KEY_VOLUMEDOWN}, /*voldown */ + {0x5fa1, KEY_VOLUMEUP}, /*volup */ + {0x07f8, KEY_SPACE}, /*tab */ + {0x1fe1, KEY_OK}, /*play ok */ + {0x1be4, KEY_ZOOM}, /*zoom */ + {0x59a6, KEY_MUTE}, /*mute */ + {0x5ba5, KEY_RADIO}, /*tv/f */ + {0x19e7, KEY_RECORD}, /*rec */ + {0x01fe, KEY_STOP}, /*Stop */ + {0x03fd, KEY_PAUSE}, /*pause */ + {0x03fc, KEY_SCREEN}, /*<- -> */ + {0x07f9, KEY_CAMERA}, /*capture */ + {0x47b9, KEY_ESC}, /*exit */ + {0x43bc, KEY_POWER2}, /*power */ +}; + +static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state) +{ + struct opera1_state *opst = dev->priv; + u8 rcbuffer[32]; + const u16 startmarker1 = 0x10ed; + const u16 startmarker2 = 0x11ec; + struct i2c_msg read_remote[] = { + {.addr = ADDR_B880_READ_REMOTE,.buf = rcbuffer,.flags = I2C_M_RD,.len = 32}, + }; + int i = 0; + u32 send_key = 0; + + if (i2c_transfer(&dev->i2c_adap, read_remote, 1) == 1) { + for (i = 0; i < 32; i++) { + if (rcbuffer[i]) + send_key |= 1; + if (i < 31) + send_key = send_key << 1; + } + if (send_key & 0x8000) + send_key = (send_key << 1) | (send_key >> 15 & 0x01); + + if (send_key == 0xffff && opst->last_key_pressed != 0) { + *state = REMOTE_KEY_REPEAT; + *event = opst->last_key_pressed; + return 0; + } + for (; send_key != 0;) { + if (send_key >> 16 == startmarker2) { + break; + } else if (send_key >> 16 == startmarker1) { + send_key = + (send_key & 0xfffeffff) | (startmarker1 << 16); + break; + } else + send_key >>= 1; + } + + if (send_key == 0) + return 0; + + send_key = (send_key & 0xffff) | 0x0100; + + for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) { + if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) { + *state = REMOTE_KEY_PRESSED; + *event = rc_map_opera1_table[i].keycode; + opst->last_key_pressed = + rc_map_opera1_table[i].keycode; + break; + } + opst->last_key_pressed = 0; + } + } else + *state = REMOTE_NO_KEY_PRESSED; + return 0; +} + +static struct usb_device_id opera1_table[] = { + {USB_DEVICE(USB_VID_CYPRESS, USB_PID_OPERA1_COLD)}, + {USB_DEVICE(USB_VID_OPERA1, USB_PID_OPERA1_WARM)}, + {} +}; + +MODULE_DEVICE_TABLE(usb, opera1_table); + +static int opera1_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + u8 command[] = { READ_MAC_ADDR }; + opera1_xilinx_rw(d->udev, 0xb1, 0xa0, command, 1, OPERA_WRITE_MSG); + opera1_xilinx_rw(d->udev, 0xb1, 0xa1, mac, 6, OPERA_READ_MSG); + return 0; +} +static int opera1_xilinx_load_firmware(struct usb_device *dev, + const char *filename) +{ + const struct firmware *fw = NULL; + u8 *b, *p; + int ret = 0, i,fpgasize=40; + u8 testval; + info("start downloading fpga firmware %s",filename); + + if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems.", + filename); + return ret; + } else { + p = kmalloc(fw->size, GFP_KERNEL); + opera1_xilinx_rw(dev, 0xbc, 0x00, &testval, 1, OPERA_READ_MSG); + if (p != NULL && testval != 0x67) { + + u8 reset = 0, fpga_command = 0; + memcpy(p, fw->data, fw->size); + /* clear fpga ? */ + opera1_xilinx_rw(dev, 0xbc, 0xaa, &fpga_command, 1, + OPERA_WRITE_MSG); + for (i = 0; i < fw->size;) { + if ( (fw->size - i) <fpgasize){ + fpgasize=fw->size-i; + } + b = (u8 *) p + i; + if (opera1_xilinx_rw + (dev, OPERA_WRITE_FX2, 0x0, b , fpgasize, + OPERA_WRITE_MSG) != fpgasize + ) { + err("error while transferring firmware"); + ret = -EINVAL; + break; + } + i = i + fpgasize; + } + /* restart the CPU */ + if (ret || opera1_xilinx_rw + (dev, 0xa0, 0xe600, &reset, 1, + OPERA_WRITE_MSG) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + } + } + kfree(p); + release_firmware(fw); + return ret; +} + +static struct dvb_usb_device_properties opera1_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-opera-01.fw", + .size_of_priv = sizeof(struct opera1_state), + + .power_ctrl = opera1_power_ctrl, + .i2c_algo = &opera1_i2c_algo, + + .rc.legacy = { + .rc_map_table = rc_map_opera1_table, + .rc_map_size = ARRAY_SIZE(rc_map_opera1_table), + .rc_interval = 200, + .rc_query = opera1_rc_query, + }, + .read_mac_address = opera1_read_mac_address, + .generic_bulk_ctrl_endpoint = 0x00, + /* parameter for the MPEG2-data transfer */ + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = opera1_frontend_attach, + .streaming_ctrl = opera1_streaming_ctrl, + .tuner_attach = opera1_tuner_attach, + .caps = + DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter = opera1_pid_filter, + .pid_filter_ctrl = opera1_pid_filter_control, + .pid_filter_count = 252, + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x82, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .num_device_descs = 1, + .devices = { + {"Opera1 DVB-S USB2.0", + {&opera1_table[0], NULL}, + {&opera1_table[1], NULL}, + }, + } +}; + +static int opera1_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + + if (udev->descriptor.idProduct == USB_PID_OPERA1_WARM && + udev->descriptor.idVendor == USB_VID_OPERA1 && + opera1_xilinx_load_firmware(udev, "dvb-usb-opera1-fpga-01.fw") != 0 + ) { + return -EINVAL; + } + + if (0 != dvb_usb_device_init(intf, &opera1_properties, + THIS_MODULE, NULL, adapter_nr)) + return -EINVAL; + return 0; +} + +static struct usb_driver opera1_driver = { + .name = "opera1", + .probe = opera1_probe, + .disconnect = dvb_usb_device_exit, + .id_table = opera1_table, +}; + +module_usb_driver(opera1_driver); + +MODULE_AUTHOR("Mario Hlawitschka (c) dh1pa@amsat.org"); +MODULE_AUTHOR("Marco Gittler (c) g.marco@freenet.de"); +MODULE_DESCRIPTION("Driver for Opera1 DVB-S device"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c new file mode 100644 index 000000000000..02e878577c3d --- /dev/null +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -0,0 +1,1063 @@ +/* + * PCTV 452e DVB driver + * + * Copyright (c) 2006-2008 Dominik Kuhlen <dkuhlen@gmx.net> + * + * TT connect S2-3650-CI Common Interface support, MAC readout + * Copyright (C) 2008 Michael H. Schimek <mschimek@gmx.at> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* dvb usb framework */ +#define DVB_USB_LOG_PREFIX "pctv452e" +#include "dvb-usb.h" + +/* Demodulator */ +#include "stb0899_drv.h" +#include "stb0899_reg.h" +#include "stb0899_cfg.h" +/* Tuner */ +#include "stb6100.h" +#include "stb6100_cfg.h" +/* FE Power */ +#include "lnbp22.h" + +#include "dvb_ca_en50221.h" +#include "ttpci-eeprom.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define ISOC_INTERFACE_ALTERNATIVE 3 + +#define SYNC_BYTE_OUT 0xaa +#define SYNC_BYTE_IN 0x55 + +/* guessed: (copied from ttusb-budget) */ +#define PCTV_CMD_RESET 0x15 +/* command to poll IR receiver */ +#define PCTV_CMD_IR 0x1b +/* command to send I2C */ +#define PCTV_CMD_I2C 0x31 + +#define I2C_ADDR_STB0899 (0xd0 >> 1) +#define I2C_ADDR_STB6100 (0xc0 >> 1) +#define I2C_ADDR_LNBP22 (0x10 >> 1) +#define I2C_ADDR_24C16 (0xa0 >> 1) +#define I2C_ADDR_24C64 (0xa2 >> 1) + + +/* pctv452e sends us this amount of data for each issued usb-command */ +#define PCTV_ANSWER_LEN 64 +/* Wait up to 1000ms for device */ +#define PCTV_TIMEOUT 1000 + + +#define PCTV_LED_GPIO STB0899_GPIO01 +#define PCTV_LED_GREEN 0x82 +#define PCTV_LED_ORANGE 0x02 + +#define ci_dbg(format, arg...) \ +do { \ + if (0) \ + printk(KERN_DEBUG DVB_USB_LOG_PREFIX \ + ": " format "\n" , ## arg); \ +} while (0) + +enum { + TT3650_CMD_CI_TEST = 0x40, + TT3650_CMD_CI_RD_CTRL, + TT3650_CMD_CI_WR_CTRL, + TT3650_CMD_CI_RD_ATTR, + TT3650_CMD_CI_WR_ATTR, + TT3650_CMD_CI_RESET, + TT3650_CMD_CI_SET_VIDEO_PORT +}; + + +static struct stb0899_postproc pctv45e_postproc[] = { + { PCTV_LED_GPIO, STB0899_GPIOPULLUP }, + { 0, 0 } +}; + +/* + * stores all private variables for communication with the PCTV452e DVB-S2 + */ +struct pctv452e_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + + u8 c; /* transaction counter, wraps around... */ + u8 initialized; /* set to 1 if 0x15 has been sent */ + u16 last_rc_key; +}; + +static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, + unsigned int write_len, unsigned int read_len) +{ + struct pctv452e_state *state = (struct pctv452e_state *)d->priv; + u8 buf[64]; + u8 id; + unsigned int rlen; + int ret; + + BUG_ON(NULL == data && 0 != (write_len | read_len)); + BUG_ON(write_len > 64 - 4); + BUG_ON(read_len > 64 - 4); + + id = state->c++; + + buf[0] = SYNC_BYTE_OUT; + buf[1] = id; + buf[2] = cmd; + buf[3] = write_len; + + memcpy(buf + 4, data, write_len); + + rlen = (read_len > 0) ? 64 : 0; + ret = dvb_usb_generic_rw(d, buf, 4 + write_len, + buf, rlen, /* delay_ms */ 0); + if (0 != ret) + goto failed; + + ret = -EIO; + if (SYNC_BYTE_IN != buf[0] || id != buf[1]) + goto failed; + + memcpy(data, buf + 4, read_len); + + return 0; + +failed: + err("CI error %d; %02X %02X %02X -> %*ph.", + ret, SYNC_BYTE_OUT, id, cmd, 3, buf); + + return ret; +} + +static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, + u8 cmd, u8 *data, unsigned int write_len, + unsigned int read_len) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct pctv452e_state *state = (struct pctv452e_state *)d->priv; + int ret; + + mutex_lock(&state->ca_mutex); + ret = tt3650_ci_msg(d, cmd, data, write_len, read_len); + mutex_unlock(&state->ca_mutex); + + return ret; +} + +static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, int address) +{ + u8 buf[3]; + int ret; + + if (0 != slot) + return -EINVAL; + + buf[0] = (address >> 8) & 0x0F; + buf[1] = address; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3); + + ci_dbg("%s %04x -> %d 0x%02x", + __func__, address, ret, buf[2]); + + if (ret < 0) + return ret; + + return buf[2]; +} + +static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, + int slot, int address, u8 value) +{ + u8 buf[3]; + + ci_dbg("%s %d 0x%04x 0x%02x", + __func__, slot, address, value); + + if (0 != slot) + return -EINVAL; + + buf[0] = (address >> 8) & 0x0F; + buf[1] = address; + buf[2] = value; + + return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3); +} + +static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address) +{ + u8 buf[2]; + int ret; + + if (0 != slot) + return -EINVAL; + + buf[0] = address & 3; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2); + + ci_dbg("%s 0x%02x -> %d 0x%02x", + __func__, address, ret, buf[1]); + + if (ret < 0) + return ret; + + return buf[1]; +} + +static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, + int slot, + u8 address, + u8 value) +{ + u8 buf[2]; + + ci_dbg("%s %d 0x%02x 0x%02x", + __func__, slot, address, value); + + if (0 != slot) + return -EINVAL; + + buf[0] = address; + buf[1] = value; + + return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2); +} + +static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, + int slot, + int enable) +{ + u8 buf[1]; + int ret; + + ci_dbg("%s %d %d", __func__, slot, enable); + + if (0 != slot) + return -EINVAL; + + enable = !!enable; + buf[0] = enable; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); + if (ret < 0) + return ret; + + if (enable != buf[0]) { + err("CI not %sabled.", enable ? "en" : "dis"); + return -EIO; + } + + return 0; +} + +static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + return tt3650_ci_set_video_port(ca, slot, /* enable */ 0); +} + +static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + return tt3650_ci_set_video_port(ca, slot, /* enable */ 1); +} + +static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data; + struct pctv452e_state *state = (struct pctv452e_state *)d->priv; + u8 buf[1]; + int ret; + + ci_dbg("%s %d", __func__, slot); + + if (0 != slot) + return -EINVAL; + + buf[0] = 0; + + mutex_lock(&state->ca_mutex); + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); + if (0 != ret) + goto failed; + + msleep(500); + + buf[0] = 1; + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); + if (0 != ret) + goto failed; + + msleep(500); + + buf[0] = 0; /* FTA */ + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); + + failed: + mutex_unlock(&state->ca_mutex); + + return ret; +} + +static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, + int slot, + int open) +{ + u8 buf[1]; + int ret; + + if (0 != slot) + return -EINVAL; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1); + if (0 != ret) + return ret; + + if (1 == buf[0]) + return DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + + return 0; + +} + +static void tt3650_ci_uninit(struct dvb_usb_device *d) +{ + struct pctv452e_state *state; + + ci_dbg("%s", __func__); + + if (NULL == d) + return; + + state = (struct pctv452e_state *)d->priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + /* Error ignored. */ + tt3650_ci_set_video_port(&state->ca, /* slot */ 0, /* enable */ 0); + + dvb_ca_en50221_release(&state->ca); + + memset(&state->ca, 0, sizeof(state->ca)); +} + +static int tt3650_ci_init(struct dvb_usb_adapter *a) +{ + struct dvb_usb_device *d = a->dev; + struct pctv452e_state *state = (struct pctv452e_state *)d->priv; + int ret; + + ci_dbg("%s", __func__); + + mutex_init(&state->ca_mutex); + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem; + state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem; + state->ca.read_cam_control = tt3650_ci_read_cam_control; + state->ca.write_cam_control = tt3650_ci_write_cam_control; + state->ca.slot_reset = tt3650_ci_slot_reset; + state->ca.slot_shutdown = tt3650_ci_slot_shutdown; + state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable; + state->ca.poll_slot_status = tt3650_ci_poll_slot_status; + state->ca.data = d; + + ret = dvb_ca_en50221_init(&a->dvb_adap, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (0 != ret) { + err("Cannot initialize CI: Error %d.", ret); + memset(&state->ca, 0, sizeof(state->ca)); + return ret; + } + + info("CI initialized."); + + return 0; +} + +#define CMD_BUFFER_SIZE 0x28 +static int pctv452e_i2c_msg(struct dvb_usb_device *d, u8 addr, + const u8 *snd_buf, u8 snd_len, + u8 *rcv_buf, u8 rcv_len) +{ + struct pctv452e_state *state = (struct pctv452e_state *)d->priv; + u8 buf[64]; + u8 id; + int ret; + + id = state->c++; + + ret = -EINVAL; + if (snd_len > 64 - 7 || rcv_len > 64 - 7) + goto failed; + + buf[0] = SYNC_BYTE_OUT; + buf[1] = id; + buf[2] = PCTV_CMD_I2C; + buf[3] = snd_len + 3; + buf[4] = addr << 1; + buf[5] = snd_len; + buf[6] = rcv_len; + + memcpy(buf + 7, snd_buf, snd_len); + + ret = dvb_usb_generic_rw(d, buf, 7 + snd_len, + buf, /* rcv_len */ 64, + /* delay_ms */ 0); + if (ret < 0) + goto failed; + + /* TT USB protocol error. */ + ret = -EIO; + if (SYNC_BYTE_IN != buf[0] || id != buf[1]) + goto failed; + + /* I2C device didn't respond as expected. */ + ret = -EREMOTEIO; + if (buf[5] < snd_len || buf[6] < rcv_len) + goto failed; + + memcpy(rcv_buf, buf + 7, rcv_len); + + return rcv_len; + +failed: + err("I2C error %d; %02X %02X %02X %02X %02X -> " + "%02X %02X %02X %02X %02X.", + ret, SYNC_BYTE_OUT, id, addr << 1, snd_len, rcv_len, + buf[0], buf[1], buf[4], buf[5], buf[6]); + + return ret; +} + +static int pctv452e_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msg, + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adapter); + int i; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + u8 addr, snd_len, rcv_len, *snd_buf, *rcv_buf; + int ret; + + if (msg[i].flags & I2C_M_RD) { + addr = msg[i].addr; + snd_buf = NULL; + snd_len = 0; + rcv_buf = msg[i].buf; + rcv_len = msg[i].len; + } else { + addr = msg[i].addr; + snd_buf = msg[i].buf; + snd_len = msg[i].len; + rcv_buf = NULL; + rcv_len = 0; + } + + ret = pctv452e_i2c_msg(d, addr, snd_buf, snd_len, rcv_buf, + rcv_len); + if (ret < rcv_len) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 pctv452e_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) +{ + struct pctv452e_state *state = (struct pctv452e_state *)d->priv; + u8 b0[] = { 0xaa, 0, PCTV_CMD_RESET, 1, 0 }; + u8 rx[PCTV_ANSWER_LEN]; + int ret; + + info("%s: %d\n", __func__, i); + + if (!i) + return 0; + + if (state->initialized) + return 0; + + /* hmm where shoud this should go? */ + ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE); + if (ret != 0) + info("%s: Warning set interface returned: %d\n", + __func__, ret); + + /* this is a one-time initialization, dont know where to put */ + b0[1] = state->c++; + /* reset board */ + ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); + if (ret) + return ret; + + b0[1] = state->c++; + b0[4] = 1; + /* reset board (again?) */ + ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); + if (ret) + return ret; + + state->initialized = 1; + + return 0; +} + +static int pctv452e_rc_query(struct dvb_usb_device *d) +{ + struct pctv452e_state *state = (struct pctv452e_state *)d->priv; + u8 b[CMD_BUFFER_SIZE]; + u8 rx[PCTV_ANSWER_LEN]; + int ret, i; + u8 id = state->c++; + + /* prepare command header */ + b[0] = SYNC_BYTE_OUT; + b[1] = id; + b[2] = PCTV_CMD_IR; + b[3] = 0; + + /* send ir request */ + ret = dvb_usb_generic_rw(d, b, 4, rx, PCTV_ANSWER_LEN, 0); + if (ret != 0) + return ret; + + if (debug > 3) { + info("%s: read: %2d: %*ph: ", __func__, ret, 3, rx); + for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++) + info(" %02x", rx[i+3]); + + info("\n"); + } + + if ((rx[3] == 9) && (rx[12] & 0x01)) { + /* got a "press" event */ + state->last_rc_key = (rx[7] << 8) | rx[6]; + if (debug > 2) + info("%s: cmd=0x%02x sys=0x%02x\n", + __func__, rx[6], rx[7]); + + rc_keydown(d->rc_dev, state->last_rc_key, 0); + } else if (state->last_rc_key) { + rc_keyup(d->rc_dev); + state->last_rc_key = 0; + } + + return 0; +} + +static int pctv452e_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) +{ + const u8 mem_addr[] = { 0x1f, 0xcc }; + u8 encoded_mac[20]; + int ret; + + ret = -EAGAIN; + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + goto failed; + + ret = pctv452e_i2c_msg(d, I2C_ADDR_24C16, + mem_addr + 1, /* snd_len */ 1, + encoded_mac, /* rcv_len */ 20); + if (-EREMOTEIO == ret) + /* Caution! A 24C16 interprets 0xA2 0x1F 0xCC as a + byte write if /WC is low. */ + ret = pctv452e_i2c_msg(d, I2C_ADDR_24C64, + mem_addr, 2, + encoded_mac, 20); + + mutex_unlock(&d->i2c_mutex); + + if (20 != ret) + goto failed; + + ret = ttpci_eeprom_decode_mac(mac, encoded_mac); + if (0 != ret) + goto failed; + + return 0; + +failed: + memset(mac, 0, 6); + + return ret; +} + +static const struct stb0899_s1_reg pctv452e_init_dev[] = { + { STB0899_DISCNTRL1, 0x26 }, + { STB0899_DISCNTRL2, 0x80 }, + { STB0899_DISRX_ST0, 0x04 }, + { STB0899_DISRX_ST1, 0x20 }, + { STB0899_DISPARITY, 0x00 }, + { STB0899_DISFIFO, 0x00 }, + { STB0899_DISF22, 0x99 }, + { STB0899_DISF22RX, 0x85 }, /* 0xa8 */ + { STB0899_ACRPRESC, 0x11 }, + { STB0899_ACRDIV1, 0x0a }, + { STB0899_ACRDIV2, 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG, 0x00 }, + { STB0899_MODECFG, 0x00 }, /* Inversion */ + { STB0899_IRQMSK_3, 0xf3 }, + { STB0899_IRQMSK_2, 0xfc }, + { STB0899_IRQMSK_1, 0xff }, + { STB0899_IRQMSK_0, 0xff }, + { STB0899_I2CCFG, 0x88 }, + { STB0899_I2CRPT, 0x58 }, + { STB0899_GPIO00CFG, 0x82 }, + { STB0899_GPIO01CFG, 0x82 }, /* LED: 0x02 green, 0x82 orange */ + { STB0899_GPIO02CFG, 0x82 }, + { STB0899_GPIO03CFG, 0x82 }, + { STB0899_GPIO04CFG, 0x82 }, + { STB0899_GPIO05CFG, 0x82 }, + { STB0899_GPIO06CFG, 0x82 }, + { STB0899_GPIO07CFG, 0x82 }, + { STB0899_GPIO08CFG, 0x82 }, + { STB0899_GPIO09CFG, 0x82 }, + { STB0899_GPIO10CFG, 0x82 }, + { STB0899_GPIO11CFG, 0x82 }, + { STB0899_GPIO12CFG, 0x82 }, + { STB0899_GPIO13CFG, 0x82 }, + { STB0899_GPIO14CFG, 0x82 }, + { STB0899_GPIO15CFG, 0x82 }, + { STB0899_GPIO16CFG, 0x82 }, + { STB0899_GPIO17CFG, 0x82 }, + { STB0899_GPIO18CFG, 0x82 }, + { STB0899_GPIO19CFG, 0x82 }, + { STB0899_GPIO20CFG, 0x82 }, + { STB0899_SDATCFG, 0xb8 }, + { STB0899_SCLTCFG, 0xba }, + { STB0899_AGCRFCFG, 0x1c }, /* 0x11 DVB-S; 0x1c DVB-S2 (1c, rjkm) */ + { STB0899_GPIO22, 0x82 }, + { STB0899_GPIO21, 0x91 }, + { STB0899_DIRCLKCFG, 0x82 }, + { STB0899_CLKOUT27CFG, 0x7e }, + { STB0899_STDBYCFG, 0x82 }, + { STB0899_CS0CFG, 0x82 }, + { STB0899_CS1CFG, 0x82 }, + { STB0899_DISEQCOCFG, 0x20 }, + { STB0899_NCOARSE, 0x15 }, /* 0x15 27Mhz, F/3 198MHz, F/6 108MHz */ + { STB0899_SYNTCTRL, 0x00 }, /* 0x00 CLKI, 0x02 XTALI */ + { STB0899_FILTCTRL, 0x00 }, + { STB0899_SYSCTRL, 0x00 }, + { STB0899_STOPCLK1, 0x20 }, /* orig: 0x00 budget-ci: 0x20 */ + { STB0899_STOPCLK2, 0x00 }, + { STB0899_INTBUFCTRL, 0x0a }, + { STB0899_AGC2I1, 0x00 }, + { STB0899_AGC2I2, 0x00 }, + { STB0899_AGCIQIN, 0x00 }, + { STB0899_TSTRES, 0x40 }, /* rjkm */ + { 0xffff, 0xff }, +}; + +static const struct stb0899_s1_reg pctv452e_init_s1_demod[] = { + { STB0899_DEMOD, 0x00 }, + { STB0899_RCOMPC, 0xc9 }, + { STB0899_AGC1CN, 0x01 }, + { STB0899_AGC1REF, 0x10 }, + { STB0899_RTC, 0x23 }, + { STB0899_TMGCFG, 0x4e }, + { STB0899_AGC2REF, 0x34 }, + { STB0899_TLSR, 0x84 }, + { STB0899_CFD, 0xf7 }, + { STB0899_ACLC, 0x87 }, + { STB0899_BCLC, 0x94 }, + { STB0899_EQON, 0x41 }, + { STB0899_LDT, 0xf1 }, + { STB0899_LDT2, 0xe3 }, + { STB0899_EQUALREF, 0xb4 }, + { STB0899_TMGRAMP, 0x10 }, + { STB0899_TMGTHD, 0x30 }, + { STB0899_IDCCOMP, 0xfd }, + { STB0899_QDCCOMP, 0xff }, + { STB0899_POWERI, 0x0c }, + { STB0899_POWERQ, 0x0f }, + { STB0899_RCOMP, 0x6c }, + { STB0899_AGCIQIN, 0x80 }, + { STB0899_AGC2I1, 0x06 }, + { STB0899_AGC2I2, 0x00 }, + { STB0899_TLIR, 0x30 }, + { STB0899_RTF, 0x7f }, + { STB0899_DSTATUS, 0x00 }, + { STB0899_LDI, 0xbc }, + { STB0899_CFRM, 0xea }, + { STB0899_CFRL, 0x31 }, + { STB0899_NIRM, 0x2b }, + { STB0899_NIRL, 0x80 }, + { STB0899_ISYMB, 0x1d }, + { STB0899_QSYMB, 0xa6 }, + { STB0899_SFRH, 0x2f }, + { STB0899_SFRM, 0x68 }, + { STB0899_SFRL, 0x40 }, + { STB0899_SFRUPH, 0x2f }, + { STB0899_SFRUPM, 0x68 }, + { STB0899_SFRUPL, 0x40 }, + { STB0899_EQUAI1, 0x02 }, + { STB0899_EQUAQ1, 0xff }, + { STB0899_EQUAI2, 0x04 }, + { STB0899_EQUAQ2, 0x05 }, + { STB0899_EQUAI3, 0x02 }, + { STB0899_EQUAQ3, 0xfd }, + { STB0899_EQUAI4, 0x03 }, + { STB0899_EQUAQ4, 0x07 }, + { STB0899_EQUAI5, 0x08 }, + { STB0899_EQUAQ5, 0xf5 }, + { STB0899_DSTATUS2, 0x00 }, + { STB0899_VSTATUS, 0x00 }, + { STB0899_VERROR, 0x86 }, + { STB0899_IQSWAP, 0x2a }, + { STB0899_ECNT1M, 0x00 }, + { STB0899_ECNT1L, 0x00 }, + { STB0899_ECNT2M, 0x00 }, + { STB0899_ECNT2L, 0x00 }, + { STB0899_ECNT3M, 0x0a }, + { STB0899_ECNT3L, 0xad }, + { STB0899_FECAUTO1, 0x06 }, + { STB0899_FECM, 0x01 }, + { STB0899_VTH12, 0xb0 }, + { STB0899_VTH23, 0x7a }, + { STB0899_VTH34, 0x58 }, + { STB0899_VTH56, 0x38 }, + { STB0899_VTH67, 0x34 }, + { STB0899_VTH78, 0x24 }, + { STB0899_PRVIT, 0xff }, + { STB0899_VITSYNC, 0x19 }, + { STB0899_RSULC, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC, 0x42 }, + { STB0899_RSLLC, 0x41 }, + { STB0899_TSLPL, 0x12 }, + { STB0899_TSCFGH, 0x0c }, + { STB0899_TSCFGM, 0x00 }, + { STB0899_TSCFGL, 0x00 }, + { STB0899_TSOUT, 0x69 }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL, 0x00 }, + { STB0899_TSINHDELH, 0x02 }, + { STB0899_TSINHDELM, 0x00 }, + { STB0899_TSINHDELL, 0x00 }, + { STB0899_TSLLSTKM, 0x1b }, + { STB0899_TSLLSTKL, 0xb3 }, + { STB0899_TSULSTKM, 0x00 }, + { STB0899_TSULSTKL, 0x00 }, + { STB0899_PCKLENUL, 0xbc }, + { STB0899_PCKLENLL, 0xcc }, + { STB0899_RSPCKLEN, 0xbd }, + { STB0899_TSSTATUS, 0x90 }, + { STB0899_ERRCTRL1, 0xb6 }, + { STB0899_ERRCTRL2, 0x95 }, + { STB0899_ERRCTRL3, 0x8d }, + { STB0899_DMONMSK1, 0x27 }, + { STB0899_DMONMSK0, 0x03 }, + { STB0899_DEMAPVIT, 0x5c }, + { STB0899_PLPARM, 0x19 }, + { STB0899_PDELCTRL, 0x48 }, + { STB0899_PDELCTRL2, 0x00 }, + { STB0899_BBHCTRL1, 0x00 }, + { STB0899_BBHCTRL2, 0x00 }, + { STB0899_HYSTTHRESH, 0x77 }, + { STB0899_MATCSTM, 0x00 }, + { STB0899_MATCSTL, 0x00 }, + { STB0899_UPLCSTM, 0x00 }, + { STB0899_UPLCSTL, 0x00 }, + { STB0899_DFLCSTM, 0x00 }, + { STB0899_DFLCSTL, 0x00 }, + { STB0899_SYNCCST, 0x00 }, + { STB0899_SYNCDCSTM, 0x00 }, + { STB0899_SYNCDCSTL, 0x00 }, + { STB0899_ISI_ENTRY, 0x00 }, + { STB0899_ISI_BIT_EN, 0x00 }, + { STB0899_MATSTRM, 0xf0 }, + { STB0899_MATSTRL, 0x02 }, + { STB0899_UPLSTRM, 0x45 }, + { STB0899_UPLSTRL, 0x60 }, + { STB0899_DFLSTRM, 0xe3 }, + { STB0899_DFLSTRL, 0x00 }, + { STB0899_SYNCSTR, 0x47 }, + { STB0899_SYNCDSTRM, 0x05 }, + { STB0899_SYNCDSTRL, 0x18 }, + { STB0899_CFGPDELSTATUS1, 0x19 }, + { STB0899_CFGPDELSTATUS2, 0x2b }, + { STB0899_BBFERRORM, 0x00 }, + { STB0899_BBFERRORL, 0x01 }, + { STB0899_UPKTERRORM, 0x00 }, + { STB0899_UPKTERRORL, 0x00 }, + { 0xffff, 0xff }, +}; + +static struct stb0899_config stb0899_config = { + .init_dev = pctv452e_init_dev, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = pctv452e_init_s1_demod, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .demod_address = I2C_ADDR_STB0899, /* I2C Address */ + .block_sync_mode = STB0899_SYNC_FORCED, /* ? */ + + .xtal_freq = 27000000, /* Assume Hz ? */ + .inversion = IQ_SWAP_ON, /* ? */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .ts_output_mode = 0, /* Use parallel mode */ + .clock_polarity = 0, + .data_clk_parity = 0, + .fec_mode = 0, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL, + + /* helper for switching LED green/orange */ + .postproc = pctv45e_postproc +}; + +static struct stb6100_config stb6100_config = { + .tuner_address = I2C_ADDR_STB6100, + .refclock = 27000000 +}; + + +static struct i2c_algorithm pctv452e_i2c_algo = { + .master_xfer = pctv452e_i2c_xfer, + .functionality = pctv452e_i2c_func +}; + +static int pctv452e_frontend_attach(struct dvb_usb_adapter *a) +{ + struct usb_device_id *id; + + a->fe_adap[0].fe = dvb_attach(stb0899_attach, &stb0899_config, + &a->dev->i2c_adap); + if (!a->fe_adap[0].fe) + return -ENODEV; + if ((dvb_attach(lnbp22_attach, a->fe_adap[0].fe, + &a->dev->i2c_adap)) == 0) + err("Cannot attach lnbp22\n"); + + id = a->dev->desc->warm_ids[0]; + if (USB_VID_TECHNOTREND == id->idVendor + && USB_PID_TECHNOTREND_CONNECT_S2_3650_CI == id->idProduct) + /* Error ignored. */ + tt3650_ci_init(a); + + return 0; +} + +static int pctv452e_tuner_attach(struct dvb_usb_adapter *a) +{ + if (!a->fe_adap[0].fe) + return -ENODEV; + if (dvb_attach(stb6100_attach, a->fe_adap[0].fe, &stb6100_config, + &a->dev->i2c_adap) == 0) { + err("%s failed\n", __func__); + return -ENODEV; + } + + return 0; +} + +static struct usb_device_id pctv452e_usb_table[] = { + {USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_452E)}, + {USB_DEVICE(USB_VID_TECHNOTREND, USB_PID_TECHNOTREND_CONNECT_S2_3600)}, + {USB_DEVICE(USB_VID_TECHNOTREND, + USB_PID_TECHNOTREND_CONNECT_S2_3650_CI)}, + {} +}; +MODULE_DEVICE_TABLE(usb, pctv452e_usb_table); + +static struct dvb_usb_device_properties pctv452e_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */ + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct pctv452e_state), + + .power_ctrl = pctv452e_power_ctrl, + + .rc.core = { + .rc_codes = RC_MAP_DIB0700_RC5_TABLE, + .allowed_protos = RC_TYPE_UNKNOWN, + .rc_query = pctv452e_rc_query, + .rc_interval = 100, + }, + + .num_adapters = 1, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + .frontend_attach = pctv452e_frontend_attach, + .tuner_attach = pctv452e_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 4, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1 + } + } + }, + } }, + } }, + + .i2c_algo = &pctv452e_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, /* allow generice rw function */ + + .num_device_descs = 1, + .devices = { + { .name = "PCTV HDTV USB", + .cold_ids = { NULL, NULL }, /* this is a warm only device */ + .warm_ids = { &pctv452e_usb_table[0], NULL } + }, + { 0 }, + } +}; + +static struct dvb_usb_device_properties tt_connect_s2_3600_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, /* more ? */ + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = sizeof(struct pctv452e_state), + + .power_ctrl = pctv452e_power_ctrl, + .read_mac_address = pctv452e_read_mac_address, + + .rc.core = { + .rc_codes = RC_MAP_TT_1500, + .allowed_protos = RC_TYPE_UNKNOWN, + .rc_query = pctv452e_rc_query, + .rc_interval = 100, + }, + + .num_adapters = 1, + .adapter = {{ + .num_frontends = 1, + .fe = {{ + .frontend_attach = pctv452e_frontend_attach, + .tuner_attach = pctv452e_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 7, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1 + } + } + }, + + } }, + } }, + + .i2c_algo = &pctv452e_i2c_algo, + + .generic_bulk_ctrl_endpoint = 1, /* allow generic rw function*/ + + .num_device_descs = 2, + .devices = { + { .name = "Technotrend TT Connect S2-3600", + .cold_ids = { NULL, NULL }, /* this is a warm only device */ + .warm_ids = { &pctv452e_usb_table[1], NULL } + }, + { .name = "Technotrend TT Connect S2-3650-CI", + .cold_ids = { NULL, NULL }, + .warm_ids = { &pctv452e_usb_table[2], NULL } + }, + { 0 }, + } +}; + +static void pctv452e_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + + tt3650_ci_uninit(d); + dvb_usb_device_exit(intf); +} + +static int pctv452e_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (0 == dvb_usb_device_init(intf, &pctv452e_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &tt_connect_s2_3600_properties, + THIS_MODULE, NULL, adapter_nr)) + return 0; + + return -ENODEV; +} + +static struct usb_driver pctv452e_usb_driver = { + .name = "pctv452e", + .probe = pctv452e_usb_probe, + .disconnect = pctv452e_usb_disconnect, + .id_table = pctv452e_usb_table, +}; + +module_usb_driver(pctv452e_usb_driver); + +MODULE_AUTHOR("Dominik Kuhlen <dkuhlen@gmx.net>"); +MODULE_AUTHOR("Andre Weidemann <Andre.Weidemann@web.de>"); +MODULE_AUTHOR("Michael H. Schimek <mschimek@gmx.at>"); +MODULE_DESCRIPTION("Pinnacle PCTV HDTV USB DVB / TT connect S2-3600 Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c new file mode 100644 index 000000000000..acefaa89cc53 --- /dev/null +++ b/drivers/media/usb/dvb-usb/technisat-usb2.c @@ -0,0 +1,789 @@ +/* + * Linux driver for Technisat DVB-S/S2 USB 2.0 device + * + * Copyright (C) 2010 Patrick Boettcher, + * Kernel Labs Inc. PO Box 745, St James, NY 11780 + * + * Development was sponsored by Technisat Digital UK Limited, whose + * registered office is Witan Gate House 500 - 600 Witan Gate West, + * Milton Keynes, MK9 1SH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * THIS PROGRAM IS PROVIDED "AS IS" AND BOTH THE COPYRIGHT HOLDER AND + * TECHNISAT DIGITAL UK LTD DISCLAIM ALL WARRANTIES WITH REGARD TO + * THIS PROGRAM INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR + * FITNESS FOR A PARTICULAR PURPOSE. NEITHER THE COPYRIGHT HOLDER + * NOR TECHNISAT DIGITAL UK LIMITED SHALL BE LIABLE FOR ANY SPECIAL, + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER + * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR + * IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS PROGRAM. See the + * GNU General Public License for more details. + */ + +#define DVB_USB_LOG_PREFIX "technisat-usb2" +#include "dvb-usb.h" + +#include "stv6110x.h" +#include "stv090x.h" + +/* module parameters */ +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (bit-mask: 1=info,2=eeprom,4=i2c,8=rc)." \ + DVB_USB_DEBUG_STATUS); + +/* disables all LED control command and + * also does not start the signal polling thread */ +static int disable_led_control; +module_param(disable_led_control, int, 0444); +MODULE_PARM_DESC(disable_led_control, + "disable LED control of the device " + "(default: 0 - LED control is active)."); + +/* device private data */ +struct technisat_usb2_state { + struct dvb_usb_device *dev; + struct delayed_work green_led_work; + u8 power_state; + + u16 last_scan_code; +}; + +/* debug print helpers */ +#define deb_info(args...) dprintk(debug, 0x01, args) +#define deb_eeprom(args...) dprintk(debug, 0x02, args) +#define deb_i2c(args...) dprintk(debug, 0x04, args) +#define deb_rc(args...) dprintk(debug, 0x08, args) + +/* vendor requests */ +#define SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST 0xB3 +#define SET_FRONT_END_RESET_VENDOR_REQUEST 0xB4 +#define GET_VERSION_INFO_VENDOR_REQUEST 0xB5 +#define SET_GREEN_LED_VENDOR_REQUEST 0xB6 +#define SET_RED_LED_VENDOR_REQUEST 0xB7 +#define GET_IR_DATA_VENDOR_REQUEST 0xB8 +#define SET_LED_TIMER_DIVIDER_VENDOR_REQUEST 0xB9 +#define SET_USB_REENUMERATION 0xBA + +/* i2c-access methods */ +#define I2C_SPEED_100KHZ_BIT 0x40 + +#define I2C_STATUS_NAK 7 +#define I2C_STATUS_OK 8 + +static int technisat_usb2_i2c_access(struct usb_device *udev, + u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen) +{ + u8 b[64]; + int ret, actual_length; + + deb_i2c("i2c-access: %02x, tx: ", device_addr); + debug_dump(tx, txlen, deb_i2c); + deb_i2c(" "); + + if (txlen > 62) { + err("i2c TX buffer can't exceed 62 bytes (dev 0x%02x)", + device_addr); + txlen = 62; + } + if (rxlen > 62) { + err("i2c RX buffer can't exceed 62 bytes (dev 0x%02x)", + device_addr); + txlen = 62; + } + + b[0] = I2C_SPEED_100KHZ_BIT; + b[1] = device_addr << 1; + + if (rx != NULL) { + b[0] |= rxlen; + b[1] |= 1; + } + + memcpy(&b[2], tx, txlen); + ret = usb_bulk_msg(udev, + usb_sndbulkpipe(udev, 0x01), + b, 2 + txlen, + NULL, 1000); + + if (ret < 0) { + err("i2c-error: out failed %02x = %d", device_addr, ret); + return -ENODEV; + } + + ret = usb_bulk_msg(udev, + usb_rcvbulkpipe(udev, 0x01), + b, 64, &actual_length, 1000); + if (ret < 0) { + err("i2c-error: in failed %02x = %d", device_addr, ret); + return -ENODEV; + } + + if (b[0] != I2C_STATUS_OK) { + err("i2c-error: %02x = %d", device_addr, b[0]); + /* handle tuner-i2c-nak */ + if (!(b[0] == I2C_STATUS_NAK && + device_addr == 0x60 + /* && device_is_technisat_usb2 */)) + return -ENODEV; + } + + deb_i2c("status: %d, ", b[0]); + + if (rx != NULL) { + memcpy(rx, &b[2], rxlen); + + deb_i2c("rx (%d): ", rxlen); + debug_dump(rx, rxlen, deb_i2c); + } + + deb_i2c("\n"); + + return 0; +} + +static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num) +{ + int ret = 0, i; + struct dvb_usb_device *d = i2c_get_adapdata(adap); + + /* Ensure nobody else hits the i2c bus while we're sending our + sequence of messages, (such as the remote control thread) */ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + if (i+1 < num && msg[i+1].flags & I2C_M_RD) { + ret = technisat_usb2_i2c_access(d->udev, msg[i+1].addr, + msg[i].buf, msg[i].len, + msg[i+1].buf, msg[i+1].len); + if (ret != 0) + break; + i++; + } else { + ret = technisat_usb2_i2c_access(d->udev, msg[i].addr, + msg[i].buf, msg[i].len, + NULL, 0); + if (ret != 0) + break; + } + } + + if (ret == 0) + ret = i; + + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 technisat_usb2_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm technisat_usb2_i2c_algo = { + .master_xfer = technisat_usb2_i2c_xfer, + .functionality = technisat_usb2_i2c_func, +}; + +#if 0 +static void technisat_usb2_frontend_reset(struct usb_device *udev) +{ + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + SET_FRONT_END_RESET_VENDOR_REQUEST, + USB_TYPE_VENDOR | USB_DIR_OUT, + 10, 0, + NULL, 0, 500); +} +#endif + +/* LED control */ +enum technisat_usb2_led_state { + LED_OFF, + LED_BLINK, + LED_ON, + LED_UNDEFINED +}; + +static int technisat_usb2_set_led(struct dvb_usb_device *d, int red, enum technisat_usb2_led_state state) +{ + int ret; + + u8 led[8] = { + red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST, + 0 + }; + + if (disable_led_control && state != LED_OFF) + return 0; + + switch (state) { + case LED_ON: + led[1] = 0x82; + break; + case LED_BLINK: + led[1] = 0x82; + if (red) { + led[2] = 0x02; + led[3] = 10; + led[4] = 10; + } else { + led[2] = 0xff; + led[3] = 50; + led[4] = 50; + } + led[5] = 1; + break; + + default: + case LED_OFF: + led[1] = 0x80; + break; + } + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + red ? SET_RED_LED_VENDOR_REQUEST : SET_GREEN_LED_VENDOR_REQUEST, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, + led, sizeof(led), 500); + + mutex_unlock(&d->i2c_mutex); + return ret; +} + +static int technisat_usb2_set_led_timer(struct dvb_usb_device *d, u8 red, u8 green) +{ + int ret; + u8 b = 0; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + SET_LED_TIMER_DIVIDER_VENDOR_REQUEST, + USB_TYPE_VENDOR | USB_DIR_OUT, + (red << 8) | green, 0, + &b, 1, 500); + + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static void technisat_usb2_green_led_control(struct work_struct *work) +{ + struct technisat_usb2_state *state = + container_of(work, struct technisat_usb2_state, green_led_work.work); + struct dvb_frontend *fe = state->dev->adapter[0].fe_adap[0].fe; + + if (state->power_state == 0) + goto schedule; + + if (fe != NULL) { + enum fe_status status; + + if (fe->ops.read_status(fe, &status) != 0) + goto schedule; + + if (status & FE_HAS_LOCK) { + u32 ber; + + if (fe->ops.read_ber(fe, &ber) != 0) + goto schedule; + + if (ber > 1000) + technisat_usb2_set_led(state->dev, 0, LED_BLINK); + else + technisat_usb2_set_led(state->dev, 0, LED_ON); + } else + technisat_usb2_set_led(state->dev, 0, LED_OFF); + } + +schedule: + schedule_delayed_work(&state->green_led_work, + msecs_to_jiffies(500)); +} + +/* method to find out whether the firmware has to be downloaded or not */ +static int technisat_usb2_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, int *cold) +{ + int ret; + u8 version[3]; + + /* first select the interface */ + if (usb_set_interface(udev, 0, 1) != 0) + err("could not set alternate setting to 0"); + else + info("set alternate setting"); + + *cold = 0; /* by default do not download a firmware - just in case something is wrong */ + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + GET_VERSION_INFO_VENDOR_REQUEST, + USB_TYPE_VENDOR | USB_DIR_IN, + 0, 0, + version, sizeof(version), 500); + + if (ret < 0) + *cold = 1; + else { + info("firmware version: %d.%d", version[1], version[2]); + *cold = 0; + } + + return 0; +} + +/* power control */ +static int technisat_usb2_power_ctrl(struct dvb_usb_device *d, int level) +{ + struct technisat_usb2_state *state = d->priv; + + state->power_state = level; + + if (disable_led_control) + return 0; + + /* green led is turned off in any case - will be turned on when tuning */ + technisat_usb2_set_led(d, 0, LED_OFF); + /* red led is turned on all the time */ + technisat_usb2_set_led(d, 1, LED_ON); + return 0; +} + +/* mac address reading - from the eeprom */ +#if 0 +static void technisat_usb2_eeprom_dump(struct dvb_usb_device *d) +{ + u8 reg; + u8 b[16]; + int i, j; + + /* full EEPROM dump */ + for (j = 0; j < 256 * 4; j += 16) { + reg = j; + if (technisat_usb2_i2c_access(d->udev, 0x50 + j / 256, ®, 1, b, 16) != 0) + break; + + deb_eeprom("EEPROM: %01x%02x: ", j / 256, reg); + for (i = 0; i < 16; i++) + deb_eeprom("%02x ", b[i]); + deb_eeprom("\n"); + } +} +#endif + +static u8 technisat_usb2_calc_lrc(const u8 *b, u16 length) +{ + u8 lrc = 0; + while (--length) + lrc ^= *b++; + return lrc; +} + +static int technisat_usb2_eeprom_lrc_read(struct dvb_usb_device *d, + u16 offset, u8 *b, u16 length, u8 tries) +{ + u8 bo = offset & 0xff; + struct i2c_msg msg[] = { + { + .addr = 0x50 | ((offset >> 8) & 0x3), + .buf = &bo, + .len = 1 + }, { + .addr = 0x50 | ((offset >> 8) & 0x3), + .flags = I2C_M_RD, + .buf = b, + .len = length + } + }; + + while (tries--) { + int status; + + if (i2c_transfer(&d->i2c_adap, msg, 2) != 2) + break; + + status = + technisat_usb2_calc_lrc(b, length - 1) == b[length - 1]; + + if (status) + return 0; + } + + return -EREMOTEIO; +} + +#define EEPROM_MAC_START 0x3f8 +#define EEPROM_MAC_TOTAL 8 +static int technisat_usb2_read_mac_address(struct dvb_usb_device *d, + u8 mac[]) +{ + u8 buf[EEPROM_MAC_TOTAL]; + + if (technisat_usb2_eeprom_lrc_read(d, EEPROM_MAC_START, + buf, EEPROM_MAC_TOTAL, 4) != 0) + return -ENODEV; + + memcpy(mac, buf, 6); + return 0; +} + +/* frontend attach */ +static int technisat_usb2_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + int i; + u8 gpio[3] = { 0 }; /* 0 = 2, 1 = 3, 2 = 4 */ + + gpio[2] = 1; /* high - voltage ? */ + + switch (voltage) { + case SEC_VOLTAGE_13: + gpio[0] = 1; + break; + case SEC_VOLTAGE_18: + gpio[0] = 1; + gpio[1] = 1; + break; + default: + case SEC_VOLTAGE_OFF: + break; + } + + for (i = 0; i < 3; i++) + if (stv090x_set_gpio(fe, i+2, 0, gpio[i], 0) != 0) + return -EREMOTEIO; + return 0; +} + +static struct stv090x_config technisat_usb2_stv090x_config = { + .device = STV0903, + .demod_mode = STV090x_SINGLE, + .clk_mode = STV090x_CLK_EXT, + + .xtal = 8000000, + .address = 0x68, + + .ts1_mode = STV090x_TSMODE_DVBCI, + .ts1_clk = 13400000, + .ts1_tei = 1, + + .repeater_level = STV090x_RPTLEVEL_64, + + .tuner_bbgain = 6, +}; + +static struct stv6110x_config technisat_usb2_stv6110x_config = { + .addr = 0x60, + .refclk = 16000000, + .clk_div = 2, +}; + +static int technisat_usb2_frontend_attach(struct dvb_usb_adapter *a) +{ + struct usb_device *udev = a->dev->udev; + int ret; + + a->fe_adap[0].fe = dvb_attach(stv090x_attach, &technisat_usb2_stv090x_config, + &a->dev->i2c_adap, STV090x_DEMODULATOR_0); + + if (a->fe_adap[0].fe) { + struct stv6110x_devctl *ctl; + + ctl = dvb_attach(stv6110x_attach, + a->fe_adap[0].fe, + &technisat_usb2_stv6110x_config, + &a->dev->i2c_adap); + + if (ctl) { + technisat_usb2_stv090x_config.tuner_init = ctl->tuner_init; + technisat_usb2_stv090x_config.tuner_sleep = ctl->tuner_sleep; + technisat_usb2_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; + technisat_usb2_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; + technisat_usb2_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; + technisat_usb2_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; + technisat_usb2_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; + technisat_usb2_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; + technisat_usb2_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; + technisat_usb2_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; + technisat_usb2_stv090x_config.tuner_get_status = ctl->tuner_get_status; + + /* call the init function once to initialize + tuner's clock output divider and demod's + master clock */ + if (a->fe_adap[0].fe->ops.init) + a->fe_adap[0].fe->ops.init(a->fe_adap[0].fe); + + if (mutex_lock_interruptible(&a->dev->i2c_mutex) < 0) + return -EAGAIN; + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + SET_IFCLK_TO_EXTERNAL_TSCLK_VENDOR_REQUEST, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, + NULL, 0, 500); + mutex_unlock(&a->dev->i2c_mutex); + + if (ret != 0) + err("could not set IF_CLK to external"); + + a->fe_adap[0].fe->ops.set_voltage = technisat_usb2_set_voltage; + + /* if everything was successful assign a nice name to the frontend */ + strlcpy(a->fe_adap[0].fe->ops.info.name, a->dev->desc->name, + sizeof(a->fe_adap[0].fe->ops.info.name)); + } else { + dvb_frontend_detach(a->fe_adap[0].fe); + a->fe_adap[0].fe = NULL; + } + } + + technisat_usb2_set_led_timer(a->dev, 1, 1); + + return a->fe_adap[0].fe == NULL ? -ENODEV : 0; +} + +/* Remote control */ + +/* the device is giving providing raw IR-signals to the host mapping + * it only to one remote control is just the default implementation + */ +#define NOMINAL_IR_BIT_TRANSITION_TIME_US 889 +#define NOMINAL_IR_BIT_TIME_US (2 * NOMINAL_IR_BIT_TRANSITION_TIME_US) + +#define FIRMWARE_CLOCK_TICK 83333 +#define FIRMWARE_CLOCK_DIVISOR 256 + +#define IR_PERCENT_TOLERANCE 15 + +#define NOMINAL_IR_BIT_TRANSITION_TICKS ((NOMINAL_IR_BIT_TRANSITION_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK) +#define NOMINAL_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICKS / FIRMWARE_CLOCK_DIVISOR) + +#define NOMINAL_IR_BIT_TIME_TICKS ((NOMINAL_IR_BIT_TIME_US * 1000 * 1000) / FIRMWARE_CLOCK_TICK) +#define NOMINAL_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICKS / FIRMWARE_CLOCK_DIVISOR) + +#define MINIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT - ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) +#define MAXIMUM_IR_BIT_TRANSITION_TICK_COUNT (NOMINAL_IR_BIT_TRANSITION_TICK_COUNT + ((NOMINAL_IR_BIT_TRANSITION_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) + +#define MINIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT - ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) +#define MAXIMUM_IR_BIT_TIME_TICK_COUNT (NOMINAL_IR_BIT_TIME_TICK_COUNT + ((NOMINAL_IR_BIT_TIME_TICK_COUNT * IR_PERCENT_TOLERANCE) / 100)) + +static int technisat_usb2_get_ir(struct dvb_usb_device *d) +{ + u8 buf[62], *b; + int ret; + struct ir_raw_event ev; + + buf[0] = GET_IR_DATA_VENDOR_REQUEST; + buf[1] = 0x08; + buf[2] = 0x8f; + buf[3] = MINIMUM_IR_BIT_TRANSITION_TICK_COUNT; + buf[4] = MAXIMUM_IR_BIT_TIME_TICK_COUNT; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GET_IR_DATA_VENDOR_REQUEST, + USB_TYPE_VENDOR | USB_DIR_OUT, + 0, 0, + buf, 5, 500); + if (ret < 0) + goto unlock; + + buf[1] = 0; + buf[2] = 0; + ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + GET_IR_DATA_VENDOR_REQUEST, + USB_TYPE_VENDOR | USB_DIR_IN, + 0x8080, 0, + buf, sizeof(buf), 500); + +unlock: + mutex_unlock(&d->i2c_mutex); + + if (ret < 0) + return ret; + + if (ret == 1) + return 0; /* no key pressed */ + + /* decoding */ + b = buf+1; + +#if 0 + deb_rc("RC: %d ", ret); + debug_dump(b, ret, deb_rc); +#endif + + ev.pulse = 0; + while (1) { + ev.pulse = !ev.pulse; + ev.duration = (*b * FIRMWARE_CLOCK_DIVISOR * FIRMWARE_CLOCK_TICK) / 1000; + ir_raw_event_store(d->rc_dev, &ev); + + b++; + if (*b == 0xff) { + ev.pulse = 0; + ev.duration = 888888*2; + ir_raw_event_store(d->rc_dev, &ev); + break; + } + } + + ir_raw_event_handle(d->rc_dev); + + return 1; +} + +static int technisat_usb2_rc_query(struct dvb_usb_device *d) +{ + int ret = technisat_usb2_get_ir(d); + + if (ret < 0) + return ret; + + if (ret == 0) + return 0; + + if (!disable_led_control) + technisat_usb2_set_led(d, 1, LED_BLINK); + + return 0; +} + +/* DVB-USB and USB stuff follows */ +static struct usb_device_id technisat_usb2_id_table[] = { + { USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_DVB_S2) }, + { 0 } /* Terminating entry */ +}; + +/* device description */ +static struct dvb_usb_device_properties technisat_usb2_devices = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .identify_state = technisat_usb2_identify_state, + .firmware = "dvb-usb-SkyStar_USB_HD_FW_v17_63.HEX.fw", + + .size_of_priv = sizeof(struct technisat_usb2_state), + + .i2c_algo = &technisat_usb2_i2c_algo, + + .power_ctrl = technisat_usb2_power_ctrl, + .read_mac_address = technisat_usb2_read_mac_address, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = technisat_usb2_frontend_attach, + + .stream = { + .type = USB_ISOC, + .count = 8, + .endpoint = 0x2, + .u = { + .isoc = { + .framesperurb = 32, + .framesize = 2048, + .interval = 3, + } + } + }, + }}, + .size_of_priv = 0, + }, + }, + + .num_device_descs = 1, + .devices = { + { "Technisat SkyStar USB HD (DVB-S/S2)", + { &technisat_usb2_id_table[0], NULL }, + { NULL }, + }, + }, + + .rc.core = { + .rc_interval = 100, + .rc_codes = RC_MAP_TECHNISAT_USB2, + .module_name = "technisat-usb2", + .rc_query = technisat_usb2_rc_query, + .allowed_protos = RC_TYPE_ALL, + .driver_type = RC_DRIVER_IR_RAW, + } +}; + +static int technisat_usb2_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *dev; + + if (dvb_usb_device_init(intf, &technisat_usb2_devices, THIS_MODULE, + &dev, adapter_nr) != 0) + return -ENODEV; + + if (dev) { + struct technisat_usb2_state *state = dev->priv; + state->dev = dev; + + if (!disable_led_control) { + INIT_DELAYED_WORK(&state->green_led_work, + technisat_usb2_green_led_control); + schedule_delayed_work(&state->green_led_work, + msecs_to_jiffies(500)); + } + } + + return 0; +} + +static void technisat_usb2_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *dev = usb_get_intfdata(intf); + + /* work and stuff was only created when the device is is hot-state */ + if (dev != NULL) { + struct technisat_usb2_state *state = dev->priv; + if (state != NULL) + cancel_delayed_work_sync(&state->green_led_work); + } + + dvb_usb_device_exit(intf); +} + +static struct usb_driver technisat_usb2_driver = { + .name = "dvb_usb_technisat_usb2", + .probe = technisat_usb2_probe, + .disconnect = technisat_usb2_disconnect, + .id_table = technisat_usb2_id_table, +}; + +module_usb_driver(technisat_usb2_driver); + +MODULE_AUTHOR("Patrick Boettcher <pboettcher@kernellabs.com>"); +MODULE_DESCRIPTION("Driver for Technisat DVB-S/S2 USB 2.0 device"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c new file mode 100644 index 000000000000..6a50cdea3bce --- /dev/null +++ b/drivers/media/usb/dvb-usb/ttusb2.c @@ -0,0 +1,820 @@ +/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones + * (e.g. Pinnacle 400e DVB-S USB2.0). + * + * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes. + * + * TDA8263 + TDA10086 + * + * I2C addresses: + * 0x08 - LNBP21PD - LNB power supply + * 0x0e - TDA10086 - Demodulator + * 0x50 - FX2 eeprom + * 0x60 - TDA8263 - Tuner + * 0x78 ??? + * + * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> + * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> + * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#define DVB_USB_LOG_PREFIX "ttusb2" +#include "dvb-usb.h" + +#include "ttusb2.h" + +#include "tda826x.h" +#include "tda10086.h" +#include "tda1002x.h" +#include "tda10048.h" +#include "tda827x.h" +#include "lnbp21.h" +/* CA */ +#include "dvb_ca_en50221.h" + +/* debug */ +static int dvb_usb_ttusb2_debug; +#define deb_info(args...) dprintk(dvb_usb_ttusb2_debug,0x01,args) +module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); +static int dvb_usb_ttusb2_debug_ci; +module_param_named(debug_ci,dvb_usb_ttusb2_debug_ci, int, 0644); +MODULE_PARM_DESC(debug_ci, "set debugging ci." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define ci_dbg(format, arg...) \ +do { \ + if (dvb_usb_ttusb2_debug_ci) \ + printk(KERN_DEBUG DVB_USB_LOG_PREFIX \ + ": %s " format "\n" , __func__, ## arg); \ +} while (0) + +enum { + TT3650_CMD_CI_TEST = 0x40, + TT3650_CMD_CI_RD_CTRL, + TT3650_CMD_CI_WR_CTRL, + TT3650_CMD_CI_RD_ATTR, + TT3650_CMD_CI_WR_ATTR, + TT3650_CMD_CI_RESET, + TT3650_CMD_CI_SET_VIDEO_PORT +}; + +struct ttusb2_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + u8 id; + u16 last_rc_key; +}; + +static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd, + u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + struct ttusb2_state *st = d->priv; + u8 *s, *r = NULL; + int ret = 0; + + s = kzalloc(wlen+4, GFP_KERNEL); + if (!s) + return -ENOMEM; + + r = kzalloc(64, GFP_KERNEL); + if (!r) { + kfree(s); + return -ENOMEM; + } + + s[0] = 0xaa; + s[1] = ++st->id; + s[2] = cmd; + s[3] = wlen; + memcpy(&s[4],wbuf,wlen); + + ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0); + + if (ret != 0 || + r[0] != 0x55 || + r[1] != s[1] || + r[2] != cmd || + (rlen > 0 && r[3] != rlen)) { + warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]); + kfree(s); + kfree(r); + return -EIO; + } + + if (rlen > 0) + memcpy(rbuf, &r[4], rlen); + + kfree(s); + kfree(r); + + return 0; +} + +/* ci */ +static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) +{ + int ret; + u8 rx[60];/* (64 -4) */ + ret = ttusb2_msg(d, cmd, data, write_len, rx, read_len); + if (!ret) + memcpy(data, rx, read_len); + return ret; +} + +static int tt3650_ci_msg_locked(struct dvb_ca_en50221 *ca, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) +{ + struct dvb_usb_device *d = ca->data; + struct ttusb2_state *state = d->priv; + int ret; + + mutex_lock(&state->ca_mutex); + ret = tt3650_ci_msg(d, cmd, data, write_len, read_len); + mutex_unlock(&state->ca_mutex); + + return ret; +} + +static int tt3650_ci_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) +{ + u8 buf[3]; + int ret = 0; + + if (slot) + return -EINVAL; + + buf[0] = (address >> 8) & 0x0F; + buf[1] = address; + + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_ATTR, buf, 2, 3); + + ci_dbg("%04x -> %d 0x%02x", address, ret, buf[2]); + + if (ret < 0) + return ret; + + return buf[2]; +} + +static int tt3650_ci_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) +{ + u8 buf[3]; + + ci_dbg("%d 0x%04x 0x%02x", slot, address, value); + + if (slot) + return -EINVAL; + + buf[0] = (address >> 8) & 0x0F; + buf[1] = address; + buf[2] = value; + + return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_ATTR, buf, 3, 3); +} + +static int tt3650_ci_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) +{ + u8 buf[2]; + int ret; + + if (slot) + return -EINVAL; + + buf[0] = address & 3; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_RD_CTRL, buf, 1, 2); + + ci_dbg("0x%02x -> %d 0x%02x", address, ret, buf[1]); + + if (ret < 0) + return ret; + + return buf[1]; +} + +static int tt3650_ci_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) +{ + u8 buf[2]; + + ci_dbg("%d 0x%02x 0x%02x", slot, address, value); + + if (slot) + return -EINVAL; + + buf[0] = address; + buf[1] = value; + + return tt3650_ci_msg_locked(ca, TT3650_CMD_CI_WR_CTRL, buf, 2, 2); +} + +static int tt3650_ci_set_video_port(struct dvb_ca_en50221 *ca, int slot, int enable) +{ + u8 buf[1]; + int ret; + + ci_dbg("%d %d", slot, enable); + + if (slot) + return -EINVAL; + + buf[0] = enable; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); + if (ret < 0) + return ret; + + if (enable != buf[0]) { + err("CI not %sabled.", enable ? "en" : "dis"); + return -EIO; + } + + return 0; +} + +static int tt3650_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) +{ + return tt3650_ci_set_video_port(ca, slot, 0); +} + +static int tt3650_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) +{ + return tt3650_ci_set_video_port(ca, slot, 1); +} + +static int tt3650_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot) +{ + struct dvb_usb_device *d = ca->data; + struct ttusb2_state *state = d->priv; + u8 buf[1]; + int ret; + + ci_dbg("%d", slot); + + if (slot) + return -EINVAL; + + buf[0] = 0; + + mutex_lock(&state->ca_mutex); + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); + if (ret) + goto failed; + + msleep(500); + + buf[0] = 1; + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_RESET, buf, 1, 1); + if (ret) + goto failed; + + msleep(500); + + buf[0] = 0; /* FTA */ + + ret = tt3650_ci_msg(d, TT3650_CMD_CI_SET_VIDEO_PORT, buf, 1, 1); + + msleep(1100); + + failed: + mutex_unlock(&state->ca_mutex); + + return ret; +} + +static int tt3650_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) +{ + u8 buf[1]; + int ret; + + if (slot) + return -EINVAL; + + ret = tt3650_ci_msg_locked(ca, TT3650_CMD_CI_TEST, buf, 0, 1); + if (ret) + return ret; + + if (1 == buf[0]) { + return DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + } + return 0; +} + +static void tt3650_ci_uninit(struct dvb_usb_device *d) +{ + struct ttusb2_state *state; + + ci_dbg(""); + + if (NULL == d) + return; + + state = d->priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + + memset(&state->ca, 0, sizeof(state->ca)); +} + +static int tt3650_ci_init(struct dvb_usb_adapter *a) +{ + struct dvb_usb_device *d = a->dev; + struct ttusb2_state *state = d->priv; + int ret; + + ci_dbg(""); + + mutex_init(&state->ca_mutex); + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = tt3650_ci_read_attribute_mem; + state->ca.write_attribute_mem = tt3650_ci_write_attribute_mem; + state->ca.read_cam_control = tt3650_ci_read_cam_control; + state->ca.write_cam_control = tt3650_ci_write_cam_control; + state->ca.slot_reset = tt3650_ci_slot_reset; + state->ca.slot_shutdown = tt3650_ci_slot_shutdown; + state->ca.slot_ts_enable = tt3650_ci_slot_ts_enable; + state->ca.poll_slot_status = tt3650_ci_poll_slot_status; + state->ca.data = d; + + ret = dvb_ca_en50221_init(&a->dvb_adap, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (ret) { + err("Cannot initialize CI: Error %d.", ret); + memset(&state->ca, 0, sizeof(state->ca)); + return ret; + } + + info("CI initialized."); + + return 0; +} + +static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + static u8 obuf[60], ibuf[60]; + int i, write_read, read; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD); + read = msg[i].flags & I2C_M_RD; + + obuf[0] = (msg[i].addr << 1) | (write_read | read); + if (read) + obuf[1] = 0; + else + obuf[1] = msg[i].len; + + /* read request */ + if (write_read) + obuf[2] = msg[i+1].len; + else if (read) + obuf[2] = msg[i].len; + else + obuf[2] = 0; + + memcpy(&obuf[3], msg[i].buf, msg[i].len); + + if (ttusb2_msg(d, CMD_I2C_XFER, obuf, obuf[1]+3, ibuf, obuf[2] + 3) < 0) { + err("i2c transfer failed."); + break; + } + + if (write_read) { + memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len); + i++; + } else if (read) + memcpy(msg[i].buf, &ibuf[3], msg[i].len); + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 ttusb2_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm ttusb2_i2c_algo = { + .master_xfer = ttusb2_i2c_xfer, + .functionality = ttusb2_i2c_func, +}; + +/* command to poll IR receiver (copied from pctv452e.c) */ +#define CMD_GET_IR_CODE 0x1b + +/* IR */ +static int tt3650_rc_query(struct dvb_usb_device *d) +{ + int ret; + u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */ + struct ttusb2_state *st = d->priv; + ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx)); + if (ret != 0) + return ret; + + if (rx[8] & 0x01) { + /* got a "press" event */ + st->last_rc_key = (rx[3] << 8) | rx[2]; + deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]); + rc_keydown(d->rc_dev, st->last_rc_key, rx[1]); + } else if (st->last_rc_key) { + rc_keyup(d->rc_dev); + st->last_rc_key = 0; + } + + return 0; +} + + +/* Callbacks for DVB USB */ +static int ttusb2_identify_state (struct usb_device *udev, struct + dvb_usb_device_properties *props, struct dvb_usb_device_description **desc, + int *cold) +{ + *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; + return 0; +} + +static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b = onoff; + ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0); + return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0); +} + + +static struct tda10086_config tda10086_config = { + .demod_address = 0x0e, + .invert = 0, + .diseqc_tone = 1, + .xtal_freq = TDA10086_XTAL_16M, +}; + +static struct tda10023_config tda10023_config = { + .demod_address = 0x0c, + .invert = 0, + .xtal = 16000000, + .pll_m = 11, + .pll_p = 3, + .pll_n = 1, + .deltaf = 0xa511, +}; + +static struct tda10048_config tda10048_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_PARALLEL_OUTPUT, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_4000, + .dtv7_if_freq_khz = TDA10048_IF_4500, + .dtv8_if_freq_khz = TDA10048_IF_5000, + .clk_freq_khz = TDA10048_CLK_16000, + .no_firmware = 1, + .set_pll = true , + .pll_m = 5, + .pll_n = 3, + .pll_p = 0, +}; + +static struct tda827x_config tda827x_config = { + .config = 0, +}; + +static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev,0,3) < 0) + err("set interface to alts=3 failed"); + + if ((adap->fe_adap[0].fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) { + deb_info("TDA10086 attach failed\n"); + return -ENODEV; + } + + return 0; +} + +static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + + return adap->fe_adap[0].fe->ops.i2c_gate_ctrl(adap->fe_adap[0].fe, enable); +} + +static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap) +{ + if (usb_set_interface(adap->dev->udev, 0, 3) < 0) + err("set interface to alts=3 failed"); + + if (adap->fe_adap[0].fe == NULL) { + /* FE 0 DVB-C */ + adap->fe_adap[0].fe = dvb_attach(tda10023_attach, + &tda10023_config, &adap->dev->i2c_adap, 0x48); + + if (adap->fe_adap[0].fe == NULL) { + deb_info("TDA10023 attach failed\n"); + return -ENODEV; + } + tt3650_ci_init(adap); + } else { + adap->fe_adap[1].fe = dvb_attach(tda10048_attach, + &tda10048_config, &adap->dev->i2c_adap); + + if (adap->fe_adap[1].fe == NULL) { + deb_info("TDA10048 attach failed\n"); + return -ENODEV; + } + + /* tuner is behind TDA10023 I2C-gate */ + adap->fe_adap[1].fe->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl; + + } + + return 0; +} + +static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + + /* MFE: select correct FE to attach tuner since that's called twice */ + if (adap->fe_adap[1].fe == NULL) + fe = adap->fe_adap[0].fe; + else + fe = adap->fe_adap[1].fe; + + /* attach tuner */ + if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) { + printk(KERN_ERR "%s: No tda827x found!\n", __func__); + return -ENODEV; + } + return 0; +} + +static int ttusb2_tuner_tda826x_attach(struct dvb_usb_adapter *adap) +{ + if (dvb_attach(tda826x_attach, adap->fe_adap[0].fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) { + deb_info("TDA8263 attach failed\n"); + return -ENODEV; + } + + if (dvb_attach(lnbp21_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, 0, 0) == NULL) { + deb_info("LNBP21 attach failed\n"); + return -ENODEV; + } + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties ttusb2_properties; +static struct dvb_usb_device_properties ttusb2_properties_s2400; +static struct dvb_usb_device_properties ttusb2_properties_ct3650; + +static void ttusb2_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + + tt3650_ci_uninit(d); + dvb_usb_device_exit(intf); +} + +static int ttusb2_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (0 == dvb_usb_device_init(intf, &ttusb2_properties, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &ttusb2_properties_s2400, + THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &ttusb2_properties_ct3650, + THIS_MODULE, NULL, adapter_nr)) + return 0; + return -ENODEV; +} + +static struct usb_device_id ttusb2_table [] = { + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_450E) }, + { USB_DEVICE(USB_VID_TECHNOTREND, + USB_PID_TECHNOTREND_CONNECT_S2400) }, + { USB_DEVICE(USB_VID_TECHNOTREND, + USB_PID_TECHNOTREND_CONNECT_CT3650) }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, ttusb2_table); + +static struct dvb_usb_device_properties ttusb2_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-pctv-400e-01.fw", + + .size_of_priv = sizeof(struct ttusb2_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = NULL, // ttusb2_streaming_ctrl, + + .frontend_attach = ttusb2_frontend_tda10086_attach, + .tuner_attach = ttusb2_tuner_tda826x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }}, + } + }, + + .power_ctrl = ttusb2_power_ctrl, + .identify_state = ttusb2_identify_state, + + .i2c_algo = &ttusb2_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 2, + .devices = { + { "Pinnacle 400e DVB-S USB2.0", + { &ttusb2_table[0], NULL }, + { NULL }, + }, + { "Pinnacle 450e DVB-S USB2.0", + { &ttusb2_table[1], NULL }, + { NULL }, + }, + } +}; + +static struct dvb_usb_device_properties ttusb2_properties_s2400 = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-tt-s2400-01.fw", + + .size_of_priv = sizeof(struct ttusb2_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_tda10086_attach, + .tuner_attach = ttusb2_tuner_tda826x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }}, + } + }, + + .power_ctrl = ttusb2_power_ctrl, + .identify_state = ttusb2_identify_state, + + .i2c_algo = &ttusb2_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Technotrend TT-connect S-2400", + { &ttusb2_table[2], NULL }, + { NULL }, + }, + } +}; + +static struct dvb_usb_device_properties ttusb2_properties_ct3650 = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct ttusb2_state), + + .rc.core = { + .rc_interval = 150, /* Less than IR_KEYPRESS_TIMEOUT */ + .rc_codes = RC_MAP_TT_1500, + .rc_query = tt3650_rc_query, + .allowed_protos = RC_TYPE_UNKNOWN, + }, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 2, + .fe = {{ + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_tda10023_attach, + .tuner_attach = ttusb2_tuner_tda827x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }, { + .streaming_ctrl = NULL, + + .frontend_attach = ttusb2_frontend_tda10023_attach, + .tuner_attach = ttusb2_tuner_tda827x_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 4, + .framesize = 940, + .interval = 1, + } + } + } + }}, + }, + }, + + .power_ctrl = ttusb2_power_ctrl, + .identify_state = ttusb2_identify_state, + + .i2c_algo = &ttusb2_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Technotrend TT-connect CT-3650", + .warm_ids = { &ttusb2_table[3], NULL }, + }, + } +}; + +static struct usb_driver ttusb2_driver = { + .name = "dvb_usb_ttusb2", + .probe = ttusb2_probe, + .disconnect = ttusb2_usb_disconnect, + .id_table = ttusb2_table, +}; + +module_usb_driver(ttusb2_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/ttusb2.h b/drivers/media/usb/dvb-usb/ttusb2.h new file mode 100644 index 000000000000..52a63af40896 --- /dev/null +++ b/drivers/media/usb/dvb-usb/ttusb2.h @@ -0,0 +1,70 @@ +/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones + * (e.g. Pinnacle 400e DVB-S USB2.0). + * + * Copyright (c) 2002 Holger Waechtler <holger@convergence.de> + * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net> + * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_TTUSB2_H_ +#define _DVB_USB_TTUSB2_H_ + +/* TTUSB protocol + * + * always to messages (out/in) + * out message: + * 0xaa <id> <cmdbyte> <datalen> <data...> + * + * in message (complete block is always 0x40 bytes long) + * 0x55 <id> <cmdbyte> <datalen> <data...> + * + * id is incremented for each transaction + */ + +#define CMD_DSP_DOWNLOAD 0x13 +/* out data: <byte>[28] + * last block must be empty */ + +#define CMD_DSP_BOOT 0x14 +/* out data: nothing */ + +#define CMD_POWER 0x15 +/* out data: <on=1/off=0> */ + +#define CMD_LNB 0x16 +/* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */ + +#define CMD_GET_VERSION 0x17 +/* in data: <version_byte>[5] */ + +#define CMD_DISEQC 0x18 +/* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */ + +#define CMD_PID_ENABLE 0x22 +/* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */ + +#define CMD_PID_DISABLE 0x23 +/* out data: <index> */ + +#define CMD_FILTER_ENABLE 0x24 +/* out data: <index> <pid_idx> <filter>[12] <mask>[12] */ + +#define CMD_FILTER_DISABLE 0x25 +/* out data: <index> */ + +#define CMD_GET_DSP_VERSION 0x26 +/* in data: <version_byte>[28] */ + +#define CMD_I2C_XFER 0x31 +/* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen] + * in data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */ + +#define CMD_I2C_BITRATE 0x32 +/* out data: <default=0> */ + +#endif diff --git a/drivers/media/usb/dvb-usb/umt-010.c b/drivers/media/usb/dvb-usb/umt-010.c new file mode 100644 index 000000000000..9b042292e788 --- /dev/null +++ b/drivers/media/usb/dvb-usb/umt-010.c @@ -0,0 +1,151 @@ +/* DVB USB framework compliant Linux driver for the HanfTek UMT-010 USB2.0 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +#include "mt352.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int umt_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 }; + + static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff }; + static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff }; + static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 }; + static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 }; + static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f }; + + static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; + static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); + + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + + mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1)); + mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2)); + mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3)); + mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4)); + mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5)); + + mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); + mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); + + return 0; +} + +static int umt_mt352_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct mt352_config umt_config; + + memset(&umt_config,0,sizeof(struct mt352_config)); + umt_config.demod_init = umt_mt352_demod_init; + umt_config.demod_address = 0xf; + + adap->fe_adap[0].fe = dvb_attach(mt352_attach, &umt_config, &adap->dev->i2c_adap); + + return 0; +} + +static int umt_tuner_attach (struct dvb_usb_adapter *adap) +{ + dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0x61, NULL, DVB_PLL_TUA6034); + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_device_properties umt_properties; + +static int umt_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (0 == dvb_usb_device_init(intf, &umt_properties, + THIS_MODULE, NULL, adapter_nr)) + return 0; + return -EINVAL; +} + +/* do not change the order of the ID table */ +static struct usb_device_id umt_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, umt_table); + +static struct dvb_usb_device_properties umt_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-umt-010-02.fw", + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .frontend_attach = umt_mt352_frontend_attach, + .tuner_attach = umt_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = MAX_NO_URBS_FOR_DATA_STREAM, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + }}, + .size_of_priv = sizeof(struct dibusb_state), + } + }, + .power_ctrl = dibusb_power_ctrl, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .num_device_descs = 1, + .devices = { + { "Hanftek UMT-010 DVB-T USB2.0", + { &umt_table[0], NULL }, + { &umt_table[1], NULL }, + }, + } +}; + +static struct usb_driver umt_driver = { + .name = "dvb_usb_umt_010", + .probe = umt_probe, + .disconnect = dvb_usb_device_exit, + .id_table = umt_table, +}; + +module_usb_driver(umt_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for HanfTek UMT 010 USB2.0 DVB-T device"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/usb-urb.c b/drivers/media/usb/dvb-usb/usb-urb.c new file mode 100644 index 000000000000..d62ee0f5a165 --- /dev/null +++ b/drivers/media/usb/dvb-usb/usb-urb.c @@ -0,0 +1,254 @@ +/* usb-urb.c is part of the DVB USB library. + * + * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file keeps functions for initializing and handling the + * BULK and ISOC USB data transfers in a generic way. + * Can be used for DVB-only and also, that's the plan, for + * Hybrid USB devices (analog and DVB). + */ +#include "dvb-usb-common.h" + +/* URB stuff for streaming */ +static void usb_urb_complete(struct urb *urb) +{ + struct usb_data_stream *stream = urb->context; + int ptype = usb_pipetype(urb->pipe); + int i; + u8 *b; + + deb_uxfer("'%s' urb completed. status: %d, length: %d/%d, pack_num: %d, errors: %d\n", + ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk", + urb->status,urb->actual_length,urb->transfer_buffer_length, + urb->number_of_packets,urb->error_count); + + switch (urb->status) { + case 0: /* success */ + case -ETIMEDOUT: /* NAK */ + break; + case -ECONNRESET: /* kill */ + case -ENOENT: + case -ESHUTDOWN: + return; + default: /* error */ + deb_ts("urb completition error %d.\n", urb->status); + break; + } + + b = (u8 *) urb->transfer_buffer; + switch (ptype) { + case PIPE_ISOCHRONOUS: + for (i = 0; i < urb->number_of_packets; i++) { + + if (urb->iso_frame_desc[i].status != 0) + deb_ts("iso frame descriptor has an error: %d\n",urb->iso_frame_desc[i].status); + else if (urb->iso_frame_desc[i].actual_length > 0) + stream->complete(stream, b + urb->iso_frame_desc[i].offset, urb->iso_frame_desc[i].actual_length); + + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + debug_dump(b,20,deb_uxfer); + break; + case PIPE_BULK: + if (urb->actual_length > 0) + stream->complete(stream, b, urb->actual_length); + break; + default: + err("unknown endpoint type in completition handler."); + return; + } + usb_submit_urb(urb,GFP_ATOMIC); +} + +int usb_urb_kill(struct usb_data_stream *stream) +{ + int i; + for (i = 0; i < stream->urbs_submitted; i++) { + deb_ts("killing URB no. %d.\n",i); + + /* stop the URB */ + usb_kill_urb(stream->urb_list[i]); + } + stream->urbs_submitted = 0; + return 0; +} + +int usb_urb_submit(struct usb_data_stream *stream) +{ + int i,ret; + for (i = 0; i < stream->urbs_initialized; i++) { + deb_ts("submitting URB no. %d\n",i); + if ((ret = usb_submit_urb(stream->urb_list[i],GFP_ATOMIC))) { + err("could not submit URB no. %d - get them all back",i); + usb_urb_kill(stream); + return ret; + } + stream->urbs_submitted++; + } + return 0; +} + +static int usb_free_stream_buffers(struct usb_data_stream *stream) +{ + if (stream->state & USB_STATE_URB_BUF) { + while (stream->buf_num) { + stream->buf_num--; + deb_mem("freeing buffer %d\n",stream->buf_num); + usb_free_coherent(stream->udev, stream->buf_size, + stream->buf_list[stream->buf_num], + stream->dma_addr[stream->buf_num]); + } + } + + stream->state &= ~USB_STATE_URB_BUF; + + return 0; +} + +static int usb_allocate_stream_buffers(struct usb_data_stream *stream, int num, unsigned long size) +{ + stream->buf_num = 0; + stream->buf_size = size; + + deb_mem("all in all I will use %lu bytes for streaming\n",num*size); + + for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) { + deb_mem("allocating buffer %d\n",stream->buf_num); + if (( stream->buf_list[stream->buf_num] = + usb_alloc_coherent(stream->udev, size, GFP_ATOMIC, + &stream->dma_addr[stream->buf_num]) ) == NULL) { + deb_mem("not enough memory for urb-buffer allocation.\n"); + usb_free_stream_buffers(stream); + return -ENOMEM; + } + deb_mem("buffer %d: %p (dma: %Lu)\n", + stream->buf_num, +stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num]); + memset(stream->buf_list[stream->buf_num],0,size); + stream->state |= USB_STATE_URB_BUF; + } + deb_mem("allocation successful\n"); + + return 0; +} + +static int usb_bulk_urb_init(struct usb_data_stream *stream) +{ + int i, j; + + if ((i = usb_allocate_stream_buffers(stream,stream->props.count, + stream->props.u.bulk.buffersize)) < 0) + return i; + + /* allocate the URBs */ + for (i = 0; i < stream->props.count; i++) { + stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!.\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[j]); + return -ENOMEM; + } + usb_fill_bulk_urb( stream->urb_list[i], stream->udev, + usb_rcvbulkpipe(stream->udev,stream->props.endpoint), + stream->buf_list[i], + stream->props.u.bulk.buffersize, + usb_urb_complete, stream); + + stream->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + stream->urb_list[i]->transfer_dma = stream->dma_addr[i]; + stream->urbs_initialized++; + } + return 0; +} + +static int usb_isoc_urb_init(struct usb_data_stream *stream) +{ + int i,j; + + if ((i = usb_allocate_stream_buffers(stream,stream->props.count, + stream->props.u.isoc.framesize*stream->props.u.isoc.framesperurb)) < 0) + return i; + + /* allocate the URBs */ + for (i = 0; i < stream->props.count; i++) { + struct urb *urb; + int frame_offset = 0; + + stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[j]); + return -ENOMEM; + } + + urb = stream->urb_list[i]; + + urb->dev = stream->udev; + urb->context = stream; + urb->complete = usb_urb_complete; + urb->pipe = usb_rcvisocpipe(stream->udev,stream->props.endpoint); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = stream->props.u.isoc.interval; + urb->number_of_packets = stream->props.u.isoc.framesperurb; + urb->transfer_buffer_length = stream->buf_size; + urb->transfer_buffer = stream->buf_list[i]; + urb->transfer_dma = stream->dma_addr[i]; + + for (j = 0; j < stream->props.u.isoc.framesperurb; j++) { + urb->iso_frame_desc[j].offset = frame_offset; + urb->iso_frame_desc[j].length = stream->props.u.isoc.framesize; + frame_offset += stream->props.u.isoc.framesize; + } + + stream->urbs_initialized++; + } + return 0; +} + +int usb_urb_init(struct usb_data_stream *stream, struct usb_data_stream_properties *props) +{ + if (stream == NULL || props == NULL) + return -EINVAL; + + memcpy(&stream->props, props, sizeof(*props)); + + usb_clear_halt(stream->udev,usb_rcvbulkpipe(stream->udev,stream->props.endpoint)); + + if (stream->complete == NULL) { + err("there is no data callback - this doesn't make sense."); + return -EINVAL; + } + + switch (stream->props.type) { + case USB_BULK: + return usb_bulk_urb_init(stream); + case USB_ISOC: + return usb_isoc_urb_init(stream); + default: + err("unknown URB-type for data transfer."); + return -EINVAL; + } +} + +int usb_urb_exit(struct usb_data_stream *stream) +{ + int i; + + usb_urb_kill(stream); + + for (i = 0; i < stream->urbs_initialized; i++) { + if (stream->urb_list[i] != NULL) { + deb_mem("freeing URB no. %d.\n",i); + /* free the URBs */ + usb_free_urb(stream->urb_list[i]); + } + } + stream->urbs_initialized = 0; + + usb_free_stream_buffers(stream); + return 0; +} diff --git a/drivers/media/usb/dvb-usb/vp702x-fe.c b/drivers/media/usb/dvb-usb/vp702x-fe.c new file mode 100644 index 000000000000..5eab468dd904 --- /dev/null +++ b/drivers/media/usb/dvb-usb/vp702x-fe.c @@ -0,0 +1,379 @@ +/* DVB frontend part of the Linux driver for the TwinhanDTV StarBox USB2.0 + * DVB-S receiver. + * + * Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de> + * Metzler Brothers Systementwicklung GbR + * + * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This file can be removed soon, after the DST-driver is rewritten to provice + * the frontend-controlling separately. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + * + */ +#include "vp702x.h" + +struct vp702x_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; + + struct dvb_frontend_ops ops; + + fe_sec_voltage_t voltage; + fe_sec_tone_mode_t tone_mode; + + u8 lnb_buf[8]; + + u8 lock; + u8 sig; + u8 snr; + + unsigned long next_status_check; + unsigned long status_check_interval; +}; + +static int vp702x_fe_refresh_state(struct vp702x_fe_state *st) +{ + struct vp702x_device_state *dst = st->d->priv; + u8 *buf; + + if (time_after(jiffies, st->next_status_check)) { + mutex_lock(&dst->buf_mutex); + buf = dst->buf; + + vp702x_usb_in_op(st->d, READ_STATUS, 0, 0, buf, 10); + st->lock = buf[4]; + + vp702x_usb_in_op(st->d, READ_TUNER_REG_REQ, 0x11, 0, buf, 1); + st->snr = buf[0]; + + vp702x_usb_in_op(st->d, READ_TUNER_REG_REQ, 0x15, 0, buf, 1); + st->sig = buf[0]; + + mutex_unlock(&dst->buf_mutex); + st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; + } + return 0; +} + +static u8 vp702x_chksum(u8 *buf,int f, int count) +{ + u8 s = 0; + int i; + for (i = f; i < f+count; i++) + s += buf[i]; + return ~s+1; +} + +static int vp702x_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + vp702x_fe_refresh_state(st); + deb_fe("%s\n",__func__); + + if (st->lock == 0) + *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; + else + *status = 0; + + if (*status & FE_HAS_LOCK) + st->status_check_interval = 1000; + else + st->status_check_interval = 250; + return 0; +} + +/* not supported by this Frontend */ +static int vp702x_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + vp702x_fe_refresh_state(st); + *ber = 0; + return 0; +} + +/* not supported by this Frontend */ +static int vp702x_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + vp702x_fe_refresh_state(st); + *unc = 0; + return 0; +} + +static int vp702x_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + vp702x_fe_refresh_state(st); + + *strength = (st->sig << 8) | st->sig; + return 0; +} + +static int vp702x_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + u8 _snr; + struct vp702x_fe_state *st = fe->demodulator_priv; + vp702x_fe_refresh_state(st); + + _snr = (st->snr & 0x1f) * 0xff / 0x1f; + *snr = (_snr << 8) | _snr; + return 0; +} + +static int vp702x_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + deb_fe("%s\n",__func__); + tune->min_delay_ms = 2000; + return 0; +} + +static int vp702x_fe_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct vp702x_fe_state *st = fe->demodulator_priv; + struct vp702x_device_state *dst = st->d->priv; + u32 freq = fep->frequency/1000; + /*CalFrequency*/ +/* u16 frequencyRef[16] = { 2, 4, 8, 16, 32, 64, 128, 256, 24, 5, 10, 20, 40, 80, 160, 320 }; */ + u64 sr; + u8 *cmd; + + mutex_lock(&dst->buf_mutex); + + cmd = dst->buf; + memset(cmd, 0, 10); + + cmd[0] = (freq >> 8) & 0x7f; + cmd[1] = freq & 0xff; + cmd[2] = 1; /* divrate == 4 -> frequencyRef[1] -> 1 here */ + + sr = (u64) (fep->symbol_rate/1000) << 20; + do_div(sr,88000); + cmd[3] = (sr >> 12) & 0xff; + cmd[4] = (sr >> 4) & 0xff; + cmd[5] = (sr << 4) & 0xf0; + + deb_fe("setting frontend to: %u -> %u (%x) LNB-based GHz, symbolrate: %d -> %lu (%lx)\n", + fep->frequency, freq, freq, fep->symbol_rate, + (unsigned long) sr, (unsigned long) sr); + +/* if (fep->inversion == INVERSION_ON) + cmd[6] |= 0x80; */ + + if (st->voltage == SEC_VOLTAGE_18) + cmd[6] |= 0x40; + +/* if (fep->symbol_rate > 8000000) + cmd[6] |= 0x20; + + if (fep->frequency < 1531000) + cmd[6] |= 0x04; + + if (st->tone_mode == SEC_TONE_ON) + cmd[6] |= 0x01;*/ + + cmd[7] = vp702x_chksum(cmd,0,7); + + st->status_check_interval = 250; + st->next_status_check = jiffies; + + vp702x_usb_inout_op(st->d, cmd, 8, cmd, 10, 100); + + if (cmd[2] == 0 && cmd[3] == 0) + deb_fe("tuning failed.\n"); + else + deb_fe("tuning succeeded.\n"); + + mutex_unlock(&dst->buf_mutex); + + return 0; +} + +static int vp702x_fe_init(struct dvb_frontend *fe) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + deb_fe("%s\n",__func__); + vp702x_usb_in_op(st->d, RESET_TUNER, 0, 0, NULL, 0); + return 0; +} + +static int vp702x_fe_sleep(struct dvb_frontend *fe) +{ + deb_fe("%s\n",__func__); + return 0; +} + +static int vp702x_fe_send_diseqc_msg (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd *m) +{ + u8 *cmd; + struct vp702x_fe_state *st = fe->demodulator_priv; + struct vp702x_device_state *dst = st->d->priv; + + deb_fe("%s\n",__func__); + + if (m->msg_len > 4) + return -EINVAL; + + mutex_lock(&dst->buf_mutex); + + cmd = dst->buf; + cmd[1] = SET_DISEQC_CMD; + cmd[2] = m->msg_len; + memcpy(&cmd[3], m->msg, m->msg_len); + cmd[7] = vp702x_chksum(cmd, 0, 7); + + vp702x_usb_inout_op(st->d, cmd, 8, cmd, 10, 100); + + if (cmd[2] == 0 && cmd[3] == 0) + deb_fe("diseqc cmd failed.\n"); + else + deb_fe("diseqc cmd succeeded.\n"); + + mutex_unlock(&dst->buf_mutex); + + return 0; +} + +static int vp702x_fe_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) +{ + deb_fe("%s\n",__func__); + return 0; +} + +static int vp702x_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + struct vp702x_device_state *dst = st->d->priv; + u8 *buf; + + deb_fe("%s\n",__func__); + + st->tone_mode = tone; + + if (tone == SEC_TONE_ON) + st->lnb_buf[2] = 0x02; + else + st->lnb_buf[2] = 0x00; + + st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7); + + mutex_lock(&dst->buf_mutex); + + buf = dst->buf; + memcpy(buf, st->lnb_buf, 8); + + vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100); + if (buf[2] == 0 && buf[3] == 0) + deb_fe("set_tone cmd failed.\n"); + else + deb_fe("set_tone cmd succeeded.\n"); + + mutex_unlock(&dst->buf_mutex); + + return 0; +} + +static int vp702x_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t + voltage) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + struct vp702x_device_state *dst = st->d->priv; + u8 *buf; + deb_fe("%s\n",__func__); + + st->voltage = voltage; + + if (voltage != SEC_VOLTAGE_OFF) + st->lnb_buf[4] = 0x01; + else + st->lnb_buf[4] = 0x00; + + st->lnb_buf[7] = vp702x_chksum(st->lnb_buf, 0, 7); + + mutex_lock(&dst->buf_mutex); + + buf = dst->buf; + memcpy(buf, st->lnb_buf, 8); + + vp702x_usb_inout_op(st->d, buf, 8, buf, 10, 100); + if (buf[2] == 0 && buf[3] == 0) + deb_fe("set_voltage cmd failed.\n"); + else + deb_fe("set_voltage cmd succeeded.\n"); + + mutex_unlock(&dst->buf_mutex); + return 0; +} + +static void vp702x_fe_release(struct dvb_frontend* fe) +{ + struct vp702x_fe_state *st = fe->demodulator_priv; + kfree(st); +} + +static struct dvb_frontend_ops vp702x_fe_ops; + +struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d) +{ + struct vp702x_fe_state *s = kzalloc(sizeof(struct vp702x_fe_state), GFP_KERNEL); + if (s == NULL) + goto error; + + s->d = d; + + memcpy(&s->fe.ops,&vp702x_fe_ops,sizeof(struct dvb_frontend_ops)); + s->fe.demodulator_priv = s; + + s->lnb_buf[1] = SET_LNB_POWER; + s->lnb_buf[3] = 0xff; /* 0=tone burst, 2=data burst, ff=off */ + + return &s->fe; +error: + return NULL; +} + + +static struct dvb_frontend_ops vp702x_fe_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Twinhan DST-like frontend (VP7021/VP7020) DVB-S", + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, /* kHz for QPSK frontends */ + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | + FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + .release = vp702x_fe_release, + + .init = vp702x_fe_init, + .sleep = vp702x_fe_sleep, + + .set_frontend = vp702x_fe_set_frontend, + .get_tune_settings = vp702x_fe_get_tune_settings, + + .read_status = vp702x_fe_read_status, + .read_ber = vp702x_fe_read_ber, + .read_signal_strength = vp702x_fe_read_signal_strength, + .read_snr = vp702x_fe_read_snr, + .read_ucblocks = vp702x_fe_read_unc_blocks, + + .diseqc_send_master_cmd = vp702x_fe_send_diseqc_msg, + .diseqc_send_burst = vp702x_fe_send_diseqc_burst, + .set_tone = vp702x_fe_set_tone, + .set_voltage = vp702x_fe_set_voltage, +}; diff --git a/drivers/media/usb/dvb-usb/vp702x.c b/drivers/media/usb/dvb-usb/vp702x.c new file mode 100644 index 000000000000..07c673a6e764 --- /dev/null +++ b/drivers/media/usb/dvb-usb/vp702x.c @@ -0,0 +1,444 @@ +/* DVB USB compliant Linux driver for the TwinhanDTV StarBox USB2.0 DVB-S + * receiver. + * + * Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de> + * Metzler Brothers Systementwicklung GbR + * + * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "vp702x.h" +#include <linux/mutex.h> + +/* debug */ +int dvb_usb_vp702x_debug; +module_param_named(debug,dvb_usb_vp702x_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +struct vp702x_adapter_state { + int pid_filter_count; + int pid_filter_can_bypass; + u8 pid_filter_state; +}; + +static int vp702x_usb_in_op_unlocked(struct dvb_usb_device *d, u8 req, + u16 value, u16 index, u8 *b, int blen) +{ + int ret; + + ret = usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev, 0), + req, + USB_TYPE_VENDOR | USB_DIR_IN, + value, index, b, blen, + 2000); + + if (ret < 0) { + warn("usb in operation failed. (%d)", ret); + ret = -EIO; + } else + ret = 0; + + + deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index); + debug_dump(b,blen,deb_xfer); + + return ret; +} + +int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + mutex_lock(&d->usb_mutex); + ret = vp702x_usb_in_op_unlocked(d, req, value, index, b, blen); + mutex_unlock(&d->usb_mutex); + + return ret; +} + +int vp702x_usb_out_op_unlocked(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ",req,value,index); + debug_dump(b,blen,deb_xfer); + + if ((ret = usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev,0), + req, + USB_TYPE_VENDOR | USB_DIR_OUT, + value,index,b,blen, + 2000)) != blen) { + warn("usb out operation failed. (%d)",ret); + return -EIO; + } else + return 0; +} + +int vp702x_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + int ret; + + mutex_lock(&d->usb_mutex); + ret = vp702x_usb_out_op_unlocked(d, req, value, index, b, blen); + mutex_unlock(&d->usb_mutex); + + return ret; +} + +int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec) +{ + int ret; + + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) + return ret; + + ret = vp702x_usb_out_op_unlocked(d, REQUEST_OUT, 0, 0, o, olen); + msleep(msec); + ret = vp702x_usb_in_op_unlocked(d, REQUEST_IN, 0, 0, i, ilen); + + mutex_unlock(&d->usb_mutex); + return ret; +} + +static int vp702x_usb_inout_cmd(struct dvb_usb_device *d, u8 cmd, u8 *o, + int olen, u8 *i, int ilen, int msec) +{ + struct vp702x_device_state *st = d->priv; + int ret = 0; + u8 *buf; + int buflen = max(olen + 2, ilen + 1); + + ret = mutex_lock_interruptible(&st->buf_mutex); + if (ret < 0) + return ret; + + if (buflen > st->buf_len) { + buf = kmalloc(buflen, GFP_KERNEL); + if (!buf) { + mutex_unlock(&st->buf_mutex); + return -ENOMEM; + } + info("successfully reallocated a bigger buffer"); + kfree(st->buf); + st->buf = buf; + st->buf_len = buflen; + } else { + buf = st->buf; + } + + buf[0] = 0x00; + buf[1] = cmd; + memcpy(&buf[2], o, olen); + + ret = vp702x_usb_inout_op(d, buf, olen+2, buf, ilen+1, msec); + + if (ret == 0) + memcpy(i, &buf[1], ilen); + mutex_unlock(&st->buf_mutex); + + return ret; +} + +static int vp702x_set_pld_mode(struct dvb_usb_adapter *adap, u8 bypass) +{ + int ret; + struct vp702x_device_state *st = adap->dev->priv; + u8 *buf; + + mutex_lock(&st->buf_mutex); + + buf = st->buf; + memset(buf, 0, 16); + + ret = vp702x_usb_in_op(adap->dev, 0xe0, (bypass << 8) | 0x0e, + 0, buf, 16); + mutex_unlock(&st->buf_mutex); + return ret; +} + +static int vp702x_set_pld_state(struct dvb_usb_adapter *adap, u8 state) +{ + int ret; + struct vp702x_device_state *st = adap->dev->priv; + u8 *buf; + + mutex_lock(&st->buf_mutex); + + buf = st->buf; + memset(buf, 0, 16); + ret = vp702x_usb_in_op(adap->dev, 0xe0, (state << 8) | 0x0f, + 0, buf, 16); + + mutex_unlock(&st->buf_mutex); + + return ret; +} + +static int vp702x_set_pid(struct dvb_usb_adapter *adap, u16 pid, u8 id, int onoff) +{ + struct vp702x_adapter_state *st = adap->priv; + struct vp702x_device_state *dst = adap->dev->priv; + u8 *buf; + + if (onoff) + st->pid_filter_state |= (1 << id); + else { + st->pid_filter_state &= ~(1 << id); + pid = 0xffff; + } + + id = 0x10 + id*2; + + vp702x_set_pld_state(adap, st->pid_filter_state); + + mutex_lock(&dst->buf_mutex); + + buf = dst->buf; + memset(buf, 0, 16); + vp702x_usb_in_op(adap->dev, 0xe0, (((pid >> 8) & 0xff) << 8) | (id), 0, buf, 16); + vp702x_usb_in_op(adap->dev, 0xe0, (((pid ) & 0xff) << 8) | (id+1), 0, buf, 16); + + mutex_unlock(&dst->buf_mutex); + + return 0; +} + + +static int vp702x_init_pid_filter(struct dvb_usb_adapter *adap) +{ + struct vp702x_adapter_state *st = adap->priv; + struct vp702x_device_state *dst = adap->dev->priv; + int i; + u8 *b; + + st->pid_filter_count = 8; + st->pid_filter_can_bypass = 1; + st->pid_filter_state = 0x00; + + vp702x_set_pld_mode(adap, 1); /* bypass */ + + for (i = 0; i < st->pid_filter_count; i++) + vp702x_set_pid(adap, 0xffff, i, 1); + + mutex_lock(&dst->buf_mutex); + b = dst->buf; + memset(b, 0, 10); + vp702x_usb_in_op(adap->dev, 0xb5, 3, 0, b, 10); + vp702x_usb_in_op(adap->dev, 0xb5, 0, 0, b, 10); + vp702x_usb_in_op(adap->dev, 0xb5, 1, 0, b, 10); + mutex_unlock(&dst->buf_mutex); + /*vp702x_set_pld_mode(d, 0); // filter */ + + return 0; +} + +static int vp702x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + return 0; +} + +/* keys for the enclosed remote control */ +static struct rc_map_table rc_map_vp702x_table[] = { + { 0x0001, KEY_1 }, + { 0x0002, KEY_2 }, +}; + +/* remote control stuff (does not work with my box) */ +static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 *key; + int i; + +/* remove the following return to enabled remote querying */ + return 0; + + key = kmalloc(10, GFP_KERNEL); + if (!key) + return -ENOMEM; + + vp702x_usb_in_op(d,READ_REMOTE_REQ,0,0,key,10); + + deb_rc("remote query key: %x %d\n",key[1],key[1]); + + if (key[1] == 0x44) { + *state = REMOTE_NO_KEY_PRESSED; + kfree(key); + return 0; + } + + for (i = 0; i < ARRAY_SIZE(rc_map_vp702x_table); i++) + if (rc5_custom(&rc_map_vp702x_table[i]) == key[1]) { + *state = REMOTE_KEY_PRESSED; + *event = rc_map_vp702x_table[i].keycode; + break; + } + kfree(key); + return 0; +} + + +static int vp702x_read_mac_addr(struct dvb_usb_device *d,u8 mac[6]) +{ + u8 i, *buf; + struct vp702x_device_state *st = d->priv; + + mutex_lock(&st->buf_mutex); + buf = st->buf; + for (i = 6; i < 12; i++) + vp702x_usb_in_op(d, READ_EEPROM_REQ, i, 1, &buf[i - 6], 1); + + memcpy(mac, buf, 6); + mutex_unlock(&st->buf_mutex); + return 0; +} + +static int vp702x_frontend_attach(struct dvb_usb_adapter *adap) +{ + u8 buf[10] = { 0 }; + + vp702x_usb_out_op(adap->dev, SET_TUNER_POWER_REQ, 0, 7, NULL, 0); + + if (vp702x_usb_inout_cmd(adap->dev, GET_SYSTEM_STRING, NULL, 0, + buf, 10, 10)) + return -EIO; + + buf[9] = '\0'; + info("system string: %s",&buf[1]); + + vp702x_init_pid_filter(adap); + + adap->fe_adap[0].fe = vp702x_fe_attach(adap->dev); + vp702x_usb_out_op(adap->dev, SET_TUNER_POWER_REQ, 1, 7, NULL, 0); + + return 0; +} + +static struct dvb_usb_device_properties vp702x_properties; + +static int vp702x_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct vp702x_device_state *st; + int ret; + + ret = dvb_usb_device_init(intf, &vp702x_properties, + THIS_MODULE, &d, adapter_nr); + if (ret) + goto out; + + st = d->priv; + st->buf_len = 16; + st->buf = kmalloc(st->buf_len, GFP_KERNEL); + if (!st->buf) { + ret = -ENOMEM; + dvb_usb_device_exit(intf); + goto out; + } + mutex_init(&st->buf_mutex); + +out: + return ret; + +} + +static void vp702x_usb_disconnect(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + struct vp702x_device_state *st = d->priv; + mutex_lock(&st->buf_mutex); + kfree(st->buf); + mutex_unlock(&st->buf_mutex); + dvb_usb_device_exit(intf); +} + +static struct usb_device_id vp702x_usb_table [] = { + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7021_COLD) }, +// { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7020_COLD) }, +// { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7020_WARM) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, vp702x_usb_table); + +static struct dvb_usb_device_properties vp702x_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-vp702x-02.fw", + .no_reconnect = 1, + + .size_of_priv = sizeof(struct vp702x_device_state), + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .caps = DVB_USB_ADAP_RECEIVES_204_BYTE_TS, + + .streaming_ctrl = vp702x_streaming_ctrl, + .frontend_attach = vp702x_frontend_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 10, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + .size_of_priv = sizeof(struct vp702x_adapter_state), + } + }, + .read_mac_address = vp702x_read_mac_addr, + + .rc.legacy = { + .rc_map_table = rc_map_vp702x_table, + .rc_map_size = ARRAY_SIZE(rc_map_vp702x_table), + .rc_interval = 400, + .rc_query = vp702x_rc_query, + }, + + .num_device_descs = 1, + .devices = { + { .name = "TwinhanDTV StarBox DVB-S USB2.0 (VP7021)", + .cold_ids = { &vp702x_usb_table[0], NULL }, + .warm_ids = { NULL }, + }, +/* { .name = "TwinhanDTV StarBox DVB-S USB2.0 (VP7020)", + .cold_ids = { &vp702x_usb_table[2], NULL }, + .warm_ids = { &vp702x_usb_table[3], NULL }, + }, +*/ { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver vp702x_usb_driver = { + .name = "dvb_usb_vp702x", + .probe = vp702x_usb_probe, + .disconnect = vp702x_usb_disconnect, + .id_table = vp702x_usb_table, +}; + +module_usb_driver(vp702x_usb_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Twinhan StarBox DVB-S USB2.0 and clones"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/vp702x.h b/drivers/media/usb/dvb-usb/vp702x.h new file mode 100644 index 000000000000..20b90055e7ac --- /dev/null +++ b/drivers/media/usb/dvb-usb/vp702x.h @@ -0,0 +1,113 @@ +#ifndef _DVB_USB_VP7021_H_ +#define _DVB_USB_VP7021_H_ + +#define DVB_USB_LOG_PREFIX "vp702x" +#include "dvb-usb.h" + +extern int dvb_usb_vp702x_debug; +#define deb_info(args...) dprintk(dvb_usb_vp702x_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_vp702x_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_vp702x_debug,0x04,args) +#define deb_fe(args...) dprintk(dvb_usb_vp702x_debug,0x08,args) + +/* commands are read and written with USB control messages */ + +/* consecutive read/write operation */ +#define REQUEST_OUT 0xB2 +#define REQUEST_IN 0xB3 + +/* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0 + * request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer + * the returning buffer looks as follows + * request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */ + +#define GET_TUNER_STATUS 0x05 +/* additional in buffer: + * 0 1 2 3 4 5 6 7 8 + * N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */ + +#define GET_SYSTEM_STRING 0x06 +/* additional in buffer: + * 0 1 2 3 4 5 6 7 8 + * N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */ + +#define SET_DISEQC_CMD 0x08 +/* additional out buffer: + * 0 1 2 3 4 + * len X1 X2 X3 X4 + * additional in buffer: + * 0 1 2 + * N/A 0 0 b[1] == b[2] == 0 -> success, failure otherwise */ + +#define SET_LNB_POWER 0x09 +/* additional out buffer: + * 0 1 2 + * 0x00 0xff 1 = on, 0 = off + * additional in buffer: + * 0 1 2 + * N/A 0 0 b[1] == b[2] == 0 -> success failure otherwise */ + +#define GET_MAC_ADDRESS 0x0A +/* #define GET_MAC_ADDRESS 0x0B */ +/* additional in buffer: + * 0 1 2 3 4 5 6 7 8 + * N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */ + +#define SET_PID_FILTER 0x11 +/* additional in buffer: + * 0 1 ... 14 15 16 + * PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */ + +/* request: 0xB2; i: 0; v: 0; + * b[0] != 0 -> tune and lock a channel + * 0 1 2 3 4 5 6 7 + * freq0 freq1 divstep srate0 srate1 srate2 flag chksum + */ + +/* one direction requests */ +#define READ_REMOTE_REQ 0xB4 +/* IN i: 0; v: 0; b[0] == request, b[1] == key */ + +#define READ_PID_NUMBER_REQ 0xB5 +/* IN i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */ + +#define WRITE_EEPROM_REQ 0xB6 +/* OUT i: offset; v: value to write; no extra buffer */ + +#define READ_EEPROM_REQ 0xB7 +/* IN i: bufferlen; v: offset; buffer with bufferlen bytes */ + +#define READ_STATUS 0xB8 +/* IN i: 0; v: 0; bufferlen 10 */ + +#define READ_TUNER_REG_REQ 0xB9 +/* IN i: 0; v: register; b[0] = value */ + +#define READ_FX2_REG_REQ 0xBA +/* IN i: offset; v: 0; b[0] = value */ + +#define WRITE_FX2_REG_REQ 0xBB +/* OUT i: offset; v: value to write; 1 byte extra buffer */ + +#define SET_TUNER_POWER_REQ 0xBC +/* IN i: 0 = power off, 1 = power on */ + +#define WRITE_TUNER_REG_REQ 0xBD +/* IN i: register, v: value to write, no extra buffer */ + +#define RESET_TUNER 0xBE +/* IN i: 0, v: 0, no extra buffer */ + +struct vp702x_device_state { + struct mutex buf_mutex; + int buf_len; + u8 *buf; +}; + + +extern struct dvb_frontend * vp702x_fe_attach(struct dvb_usb_device *d); + +extern int vp702x_usb_inout_op(struct dvb_usb_device *d, u8 *o, int olen, u8 *i, int ilen, int msec); +extern int vp702x_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); + +#endif diff --git a/drivers/media/usb/dvb-usb/vp7045-fe.c b/drivers/media/usb/dvb-usb/vp7045-fe.c new file mode 100644 index 000000000000..b8825b18c003 --- /dev/null +++ b/drivers/media/usb/dvb-usb/vp7045-fe.c @@ -0,0 +1,190 @@ +/* DVB frontend part of the Linux driver for TwinhanDTV Alpha/MagicBoxII USB2.0 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + * + */ +#include "vp7045.h" + +/* It is a Zarlink MT352 within a Samsung Tuner (DNOS404ZH102A) - 040929 - AAT + * + * Programming is hidden inside the firmware, so set_frontend is very easy. + * Even though there is a Firmware command that one can use to access the demod + * via its registers. This is used for status information. + */ + +struct vp7045_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; +}; + +static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 s0 = vp7045_read_reg(state->d,0x00), + s1 = vp7045_read_reg(state->d,0x01), + s3 = vp7045_read_reg(state->d,0x03); + + *status = 0; + if (s0 & (1 << 4)) + *status |= FE_HAS_CARRIER; + if (s0 & (1 << 1)) + *status |= FE_HAS_VITERBI; + if (s0 & (1 << 5)) + *status |= FE_HAS_LOCK; + if (s1 & (1 << 1)) + *status |= FE_HAS_SYNC; + if (s3 & (1 << 6)) + *status |= FE_HAS_SIGNAL; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + *ber = (vp7045_read_reg(state->d, 0x0D) << 16) | + (vp7045_read_reg(state->d, 0x0E) << 8) | + vp7045_read_reg(state->d, 0x0F); + return 0; +} + +static int vp7045_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + *unc = (vp7045_read_reg(state->d, 0x10) << 8) | + vp7045_read_reg(state->d, 0x11); + return 0; +} + +static int vp7045_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u16 signal = (vp7045_read_reg(state->d, 0x14) << 8) | + vp7045_read_reg(state->d, 0x15); + + *strength = ~signal; + return 0; +} + +static int vp7045_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 _snr = vp7045_read_reg(state->d, 0x09); + *snr = (_snr << 8) | _snr; + return 0; +} + +static int vp7045_fe_init(struct dvb_frontend* fe) +{ + return 0; +} + +static int vp7045_fe_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int vp7045_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int vp7045_fe_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *fep = &fe->dtv_property_cache; + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 buf[5]; + u32 freq = fep->frequency / 1000; + + buf[0] = (freq >> 16) & 0xff; + buf[1] = (freq >> 8) & 0xff; + buf[2] = freq & 0xff; + buf[3] = 0; + + switch (fep->bandwidth_hz) { + case 8000000: + buf[4] = 8; + break; + case 7000000: + buf[4] = 7; + break; + case 6000000: + buf[4] = 6; + break; + default: + return -EINVAL; + } + + vp7045_usb_op(state->d,LOCK_TUNER_COMMAND,buf,5,NULL,0,200); + return 0; +} + +static void vp7045_fe_release(struct dvb_frontend* fe) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops vp7045_fe_ops; + +struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d) +{ + struct vp7045_fe_state *s = kzalloc(sizeof(struct vp7045_fe_state), GFP_KERNEL); + if (s == NULL) + goto error; + + s->d = d; + memcpy(&s->fe.ops, &vp7045_fe_ops, sizeof(struct dvb_frontend_ops)); + s->fe.demodulator_priv = s; + + return &s->fe; +error: + return NULL; +} + + +static struct dvb_frontend_ops vp7045_fe_ops = { + .delsys = { SYS_DVBT }, + .info = { + .name = "Twinhan VP7045/46 USB DVB-T", + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 1000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = vp7045_fe_release, + + .init = vp7045_fe_init, + .sleep = vp7045_fe_sleep, + + .set_frontend = vp7045_fe_set_frontend, + .get_tune_settings = vp7045_fe_get_tune_settings, + + .read_status = vp7045_fe_read_status, + .read_ber = vp7045_fe_read_ber, + .read_signal_strength = vp7045_fe_read_signal_strength, + .read_snr = vp7045_fe_read_snr, + .read_ucblocks = vp7045_fe_read_unc_blocks, +}; diff --git a/drivers/media/usb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c new file mode 100644 index 000000000000..d750724132ee --- /dev/null +++ b/drivers/media/usb/dvb-usb/vp7045.c @@ -0,0 +1,302 @@ +/* DVB USB compliant Linux driver for the + * - TwinhanDTV Alpha/MagicBoxII USB2.0 DVB-T receiver + * - DigitalNow TinyUSB2 DVB-t receiver + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "vp7045.h" + +/* debug */ +static int dvb_usb_vp7045_debug; +module_param_named(debug,dvb_usb_vp7045_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +#define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_vp7045_debug,0x04,args) + +int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen, int msec) +{ + int ret = 0; + u8 *buf = d->priv; + + buf[0] = cmd; + + if (outlen > 19) + outlen = 19; + + if (inlen > 11) + inlen = 11; + + ret = mutex_lock_interruptible(&d->usb_mutex); + if (ret) + return ret; + + if (out != NULL && outlen > 0) + memcpy(&buf[1], out, outlen); + + deb_xfer("out buffer: "); + debug_dump(buf, outlen+1, deb_xfer); + + + if (usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev,0), + TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, + buf, 20, 2000) != 20) { + err("USB control message 'out' went wrong."); + ret = -EIO; + goto unlock; + } + + msleep(msec); + + if (usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev,0), + TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + buf, 12, 2000) != 12) { + err("USB control message 'in' went wrong."); + ret = -EIO; + goto unlock; + } + + deb_xfer("in buffer: "); + debug_dump(buf, 12, deb_xfer); + + if (in != NULL && inlen > 0) + memcpy(in, &buf[1], inlen); + +unlock: + mutex_unlock(&d->usb_mutex); + + return ret; +} + +u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg) +{ + u8 obuf[2] = { 0 },v; + obuf[1] = reg; + + vp7045_usb_op(d,TUNER_REG_READ,obuf,2,&v,1,30); + + return v; +} + +static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 v = onoff; + return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150); +} + +/* remote control stuff */ + +/* The keymapping struct. Somehow this should be loaded to the driver, but + * currently it is hardcoded. */ +static struct rc_map_table rc_map_vp7045_table[] = { + { 0x0016, KEY_POWER }, + { 0x0010, KEY_MUTE }, + { 0x0003, KEY_1 }, + { 0x0001, KEY_2 }, + { 0x0006, KEY_3 }, + { 0x0009, KEY_4 }, + { 0x001d, KEY_5 }, + { 0x001f, KEY_6 }, + { 0x000d, KEY_7 }, + { 0x0019, KEY_8 }, + { 0x001b, KEY_9 }, + { 0x0015, KEY_0 }, + { 0x0005, KEY_CHANNELUP }, + { 0x0002, KEY_CHANNELDOWN }, + { 0x001e, KEY_VOLUMEUP }, + { 0x000a, KEY_VOLUMEDOWN }, + { 0x0011, KEY_RECORD }, + { 0x0017, KEY_FAVORITES }, /* Heart symbol - Channel list. */ + { 0x0014, KEY_PLAY }, + { 0x001a, KEY_STOP }, + { 0x0040, KEY_REWIND }, + { 0x0012, KEY_FASTFORWARD }, + { 0x000e, KEY_PREVIOUS }, /* Recall - Previous channel. */ + { 0x004c, KEY_PAUSE }, + { 0x004d, KEY_SCREEN }, /* Full screen mode. */ + { 0x0054, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ + { 0x000c, KEY_CANCEL }, /* Cancel */ + { 0x001c, KEY_EPG }, /* EPG */ + { 0x0000, KEY_TAB }, /* Tab */ + { 0x0048, KEY_INFO }, /* Preview */ + { 0x0004, KEY_LIST }, /* RecordList */ + { 0x000f, KEY_TEXT }, /* Teletext */ + { 0x0041, KEY_PREVIOUSSONG }, + { 0x0042, KEY_NEXTSONG }, + { 0x004b, KEY_UP }, + { 0x0051, KEY_DOWN }, + { 0x004e, KEY_LEFT }, + { 0x0052, KEY_RIGHT }, + { 0x004f, KEY_ENTER }, + { 0x0013, KEY_CANCEL }, + { 0x004a, KEY_CLEAR }, + { 0x0054, KEY_PRINT }, /* Capture */ + { 0x0043, KEY_SUBTITLE }, /* Subtitle/CC */ + { 0x0008, KEY_VIDEO }, /* A/V */ + { 0x0007, KEY_SLEEP }, /* Hibernate */ + { 0x0045, KEY_ZOOM }, /* Zoom+ */ + { 0x0018, KEY_RED}, + { 0x0053, KEY_GREEN}, + { 0x005e, KEY_YELLOW}, + { 0x005f, KEY_BLUE} +}; + +static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key; + int i; + vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20); + + deb_rc("remote query key: %x %d\n",key,key); + + if (key == 0x44) { + *state = REMOTE_NO_KEY_PRESSED; + return 0; + } + + for (i = 0; i < ARRAY_SIZE(rc_map_vp7045_table); i++) + if (rc5_data(&rc_map_vp7045_table[i]) == key) { + *state = REMOTE_KEY_PRESSED; + *event = rc_map_vp7045_table[i].keycode; + break; + } + return 0; +} + +static int vp7045_read_eeprom(struct dvb_usb_device *d,u8 *buf, int len, int offset) +{ + int i = 0; + u8 v,br[2]; + for (i=0; i < len; i++) { + v = offset + i; + vp7045_usb_op(d,GET_EE_VALUE,&v,1,br,2,5); + buf[i] = br[1]; + } + deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ",offset, i); + debug_dump(buf,i,deb_info); + return 0; +} + +static int vp7045_read_mac_addr(struct dvb_usb_device *d,u8 mac[6]) +{ + return vp7045_read_eeprom(d,mac, 6, MAC_0_ADDR); +} + +static int vp7045_frontend_attach(struct dvb_usb_adapter *adap) +{ + u8 buf[255] = { 0 }; + + vp7045_usb_op(adap->dev,VENDOR_STRING_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("firmware says: %s ",buf); + + vp7045_usb_op(adap->dev,PRODUCT_STRING_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("%s ",buf); + + vp7045_usb_op(adap->dev,FW_VERSION_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("v%s\n",buf); + +/* Dump the EEPROM */ +/* vp7045_read_eeprom(d,buf, 255, FX2_ID_ADDR); */ + + adap->fe_adap[0].fe = vp7045_fe_attach(adap->dev); + + return 0; +} + +static struct dvb_usb_device_properties vp7045_properties; + +static int vp7045_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf, &vp7045_properties, + THIS_MODULE, NULL, adapter_nr); +} + +static struct usb_device_id vp7045_usb_table [] = { + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_COLD) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_WARM) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_COLD) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_WARM) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, vp7045_usb_table); + +static struct dvb_usb_device_properties vp7045_properties = { + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-vp7045-01.fw", + .size_of_priv = 20, + + .num_adapters = 1, + .adapter = { + { + .num_frontends = 1, + .fe = {{ + .frontend_attach = vp7045_frontend_attach, + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + }}, + } + }, + .power_ctrl = vp7045_power_ctrl, + .read_mac_address = vp7045_read_mac_addr, + + .rc.legacy = { + .rc_interval = 400, + .rc_map_table = rc_map_vp7045_table, + .rc_map_size = ARRAY_SIZE(rc_map_vp7045_table), + .rc_query = vp7045_rc_query, + }, + + .num_device_descs = 2, + .devices = { + { .name = "Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)", + .cold_ids = { &vp7045_usb_table[0], NULL }, + .warm_ids = { &vp7045_usb_table[1], NULL }, + }, + { .name = "DigitalNow TinyUSB 2 DVB-t Receiver", + .cold_ids = { &vp7045_usb_table[2], NULL }, + .warm_ids = { &vp7045_usb_table[3], NULL }, + }, + { NULL }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver vp7045_usb_driver = { + .name = "dvb_usb_vp7045", + .probe = vp7045_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = vp7045_usb_table, +}; + +module_usb_driver(vp7045_usb_driver); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Twinhan MagicBox/Alpha and DNTV tinyUSB2 DVB-T USB2.0"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/usb/dvb-usb/vp7045.h b/drivers/media/usb/dvb-usb/vp7045.h new file mode 100644 index 000000000000..cf5ec46f8bb1 --- /dev/null +++ b/drivers/media/usb/dvb-usb/vp7045.h @@ -0,0 +1,70 @@ +/* Common header-file of the Linux driver for the TwinhanDTV Alpha/MagicBoxII + * USB2.0 DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_VP7045_H_ +#define _DVB_USB_VP7045_H_ + +#define DVB_USB_LOG_PREFIX "vp7045" +#include "dvb-usb.h" + +/* vp7045 commands */ + +/* Twinhan Vendor requests */ +#define TH_COMMAND_IN 0xC0 +#define TH_COMMAND_OUT 0xC1 + +/* command bytes */ +#define TUNER_REG_READ 0x03 +#define TUNER_REG_WRITE 0x04 + +#define RC_VAL_READ 0x05 + #define RC_NO_KEY 0x44 + +#define SET_TUNER_POWER 0x06 +#define CHECK_TUNER_POWER 0x12 + #define Tuner_Power_ON 1 + #define Tuner_Power_OFF 0 + +#define GET_USB_SPEED 0x07 + +#define LOCK_TUNER_COMMAND 0x09 + +#define TUNER_SIGNAL_READ 0x0A + +/* FX2 eeprom */ +#define SET_EE_VALUE 0x10 +#define GET_EE_VALUE 0x11 + #define FX2_ID_ADDR 0x00 + #define VID_MSB_ADDR 0x02 + #define VID_LSB_ADDR 0x01 + #define PID_MSB_ADDR 0x04 + #define PID_LSB_ADDR 0x03 + #define MAC_0_ADDR 0x07 + #define MAC_1_ADDR 0x08 + #define MAC_2_ADDR 0x09 + #define MAC_3_ADDR 0x0a + #define MAC_4_ADDR 0x0b + #define MAC_5_ADDR 0x0c + +#define RESET_FX2 0x13 + +#define FW_VERSION_READ 0x0B +#define VENDOR_STRING_READ 0x0C +#define PRODUCT_STRING_READ 0x0D +#define FW_BCD_VERSION_READ 0x14 + +extern struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d); +extern int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen,int msec); +extern u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg); + +#endif |