diff options
Diffstat (limited to 'drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h')
| -rw-r--r-- | drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h | 406 |
1 files changed, 406 insertions, 0 deletions
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h new file mode 100644 index 000000000000..036952f2a3cb --- /dev/null +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw-internal.h @@ -0,0 +1,406 @@ +/* + * + * + * Copyright (C) 2005 Mike Isely <isely@pobox.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __PVRUSB2_HDW_INTERNAL_H +#define __PVRUSB2_HDW_INTERNAL_H + +/* + + This header sets up all the internal structures and definitions needed to + track and coordinate the driver's interaction with the hardware. ONLY + source files which actually implement part of that whole circus should be + including this header. Higher levels, like the external layers to the + various public APIs (V4L, sysfs, etc) should NOT ever include this + private, internal header. This means that pvrusb2-hdw, pvrusb2-encoder, + etc will include this, but pvrusb2-v4l should not. + +*/ + +#include <linux/videodev2.h> +#include <linux/i2c.h> +#include <linux/workqueue.h> +#include <linux/mutex.h> +#include "pvrusb2-hdw.h" +#include "pvrusb2-io.h" +#include <media/v4l2-device.h> +#include <media/cx2341x.h> +#include <media/ir-kbd-i2c.h> +#include "pvrusb2-devattr.h" + +/* Legal values for PVR2_CID_HSM */ +#define PVR2_CVAL_HSM_FAIL 0 +#define PVR2_CVAL_HSM_FULL 1 +#define PVR2_CVAL_HSM_HIGH 2 + +#define PVR2_VID_ENDPOINT 0x84 +#define PVR2_UNK_ENDPOINT 0x86 /* maybe raw yuv ? */ +#define PVR2_VBI_ENDPOINT 0x88 + +#define PVR2_CTL_BUFFSIZE 64 + +#define FREQTABLE_SIZE 500 + +#define LOCK_TAKE(x) do { mutex_lock(&x##_mutex); x##_held = !0; } while (0) +#define LOCK_GIVE(x) do { x##_held = 0; mutex_unlock(&x##_mutex); } while (0) + +typedef int (*pvr2_ctlf_is_dirty)(struct pvr2_ctrl *); +typedef void (*pvr2_ctlf_clear_dirty)(struct pvr2_ctrl *); +typedef int (*pvr2_ctlf_check_value)(struct pvr2_ctrl *,int); +typedef int (*pvr2_ctlf_get_value)(struct pvr2_ctrl *,int *); +typedef int (*pvr2_ctlf_set_value)(struct pvr2_ctrl *,int msk,int val); +typedef int (*pvr2_ctlf_val_to_sym)(struct pvr2_ctrl *,int msk,int val, + char *,unsigned int,unsigned int *); +typedef int (*pvr2_ctlf_sym_to_val)(struct pvr2_ctrl *, + const char *,unsigned int, + int *mskp,int *valp); +typedef unsigned int (*pvr2_ctlf_get_v4lflags)(struct pvr2_ctrl *); + +/* This structure describes a specific control. A table of these is set up + in pvrusb2-hdw.c. */ +struct pvr2_ctl_info { + /* Control's name suitable for use as an identifier */ + const char *name; + + /* Short description of control */ + const char *desc; + + /* Control's implementation */ + pvr2_ctlf_get_value get_value; /* Get its value */ + pvr2_ctlf_get_value get_def_value; /* Get its default value */ + pvr2_ctlf_get_value get_min_value; /* Get minimum allowed value */ + pvr2_ctlf_get_value get_max_value; /* Get maximum allowed value */ + pvr2_ctlf_set_value set_value; /* Set its value */ + pvr2_ctlf_check_value check_value; /* Check that value is valid */ + pvr2_ctlf_val_to_sym val_to_sym; /* Custom convert value->symbol */ + pvr2_ctlf_sym_to_val sym_to_val; /* Custom convert symbol->value */ + pvr2_ctlf_is_dirty is_dirty; /* Return true if dirty */ + pvr2_ctlf_clear_dirty clear_dirty; /* Clear dirty state */ + pvr2_ctlf_get_v4lflags get_v4lflags;/* Retrieve v4l flags */ + + /* Control's type (int, enum, bitmask) */ + enum pvr2_ctl_type type; + + /* Associated V4L control ID, if any */ + int v4l_id; + + /* Associated driver internal ID, if any */ + int internal_id; + + /* Don't implicitly initialize this control's value */ + int skip_init; + + /* Starting value for this control */ + int default_value; + + /* Type-specific control information */ + union { + struct { /* Integer control */ + long min_value; /* lower limit */ + long max_value; /* upper limit */ + } type_int; + struct { /* enumerated control */ + unsigned int count; /* enum value count */ + const char * const *value_names; /* symbol names */ + } type_enum; + struct { /* bitmask control */ + unsigned int valid_bits; /* bits in use */ + const char **bit_names; /* symbol name/bit */ + } type_bitmask; + } def; +}; + + +/* Same as pvr2_ctl_info, but includes storage for the control description */ +#define PVR2_CTLD_INFO_DESC_SIZE 32 +struct pvr2_ctld_info { + struct pvr2_ctl_info info; + char desc[PVR2_CTLD_INFO_DESC_SIZE]; +}; + +struct pvr2_ctrl { + const struct pvr2_ctl_info *info; + struct pvr2_hdw *hdw; +}; + + + +/* Disposition of firmware1 loading situation */ +#define FW1_STATE_UNKNOWN 0 +#define FW1_STATE_MISSING 1 +#define FW1_STATE_FAILED 2 +#define FW1_STATE_RELOAD 3 +#define FW1_STATE_OK 4 + +/* What state the device is in if it is a hybrid */ +#define PVR2_PATHWAY_UNKNOWN 0 +#define PVR2_PATHWAY_ANALOG 1 +#define PVR2_PATHWAY_DIGITAL 2 + +typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16); +#define PVR2_I2C_FUNC_CNT 128 + +/* This structure contains all state data directly needed to + manipulate the hardware (as opposed to complying with a kernel + interface) */ +struct pvr2_hdw { + /* Underlying USB device handle */ + struct usb_device *usb_dev; + struct usb_interface *usb_intf; + + /* Our handle into the v4l2 sub-device architecture */ + struct v4l2_device v4l2_dev; + /* Device description, anything that must adjust behavior based on + device specific info will use information held here. */ + const struct pvr2_device_desc *hdw_desc; + + /* Kernel worker thread handling */ + struct workqueue_struct *workqueue; + struct work_struct workpoll; /* Update driver state */ + + /* Video spigot */ + struct pvr2_stream *vid_stream; + + /* Mutex for all hardware state control */ + struct mutex big_lock_mutex; + int big_lock_held; /* For debugging */ + + /* This is a simple string which identifies the instance of this + driver. It is unique within the set of existing devices, but + there is no attempt to keep the name consistent with the same + physical device each time. */ + char name[32]; + + /* This is a simple string which identifies the physical device + instance itself - if possible. (If not possible, then it is + based on the specific driver instance, similar to name above.) + The idea here is that userspace might hopefully be able to use + this recognize specific tuners. It will encode a serial number, + if available. */ + char identifier[32]; + + /* I2C stuff */ + struct i2c_adapter i2c_adap; + struct i2c_algorithm i2c_algo; + pvr2_i2c_func i2c_func[PVR2_I2C_FUNC_CNT]; + int i2c_cx25840_hack_state; + int i2c_linked; + + /* IR related */ + unsigned int ir_scheme_active; /* IR scheme as seen from the outside */ + struct IR_i2c_init_data ir_init_data; /* params passed to IR modules */ + + /* Frequency table */ + unsigned int freqTable[FREQTABLE_SIZE]; + unsigned int freqProgSlot; + + /* Stuff for handling low level control interaction with device */ + struct mutex ctl_lock_mutex; + int ctl_lock_held; /* For debugging */ + struct urb *ctl_write_urb; + struct urb *ctl_read_urb; + unsigned char *ctl_write_buffer; + unsigned char *ctl_read_buffer; + int ctl_write_pend_flag; + int ctl_read_pend_flag; + int ctl_timeout_flag; + struct completion ctl_done; + unsigned char cmd_buffer[PVR2_CTL_BUFFSIZE]; + int cmd_debug_state; // Low level command debugging info + unsigned char cmd_debug_code; // + unsigned int cmd_debug_write_len; // + unsigned int cmd_debug_read_len; // + + /* Bits of state that describe what is going on with various parts + of the driver. */ + int state_pathway_ok; /* Pathway config is ok */ + int state_encoder_ok; /* Encoder is operational */ + int state_encoder_run; /* Encoder is running */ + int state_encoder_config; /* Encoder is configured */ + int state_encoder_waitok; /* Encoder pre-wait done */ + int state_encoder_runok; /* Encoder has run for >= .25 sec */ + int state_decoder_run; /* Decoder is running */ + int state_decoder_ready; /* Decoder is stabilized & streamable */ + int state_usbstream_run; /* FX2 is streaming */ + int state_decoder_quiescent; /* Decoder idle for minimal interval */ + int state_pipeline_config; /* Pipeline is configured */ + int state_pipeline_req; /* Somebody wants to stream */ + int state_pipeline_pause; /* Pipeline must be paused */ + int state_pipeline_idle; /* Pipeline not running */ + + /* This is the master state of the driver. It is the combined + result of other bits of state. Examining this will indicate the + overall state of the driver. Values here are one of + PVR2_STATE_xxxx */ + unsigned int master_state; + + /* True if device led is currently on */ + int led_on; + + /* True if states must be re-evaluated */ + int state_stale; + + void (*state_func)(void *); + void *state_data; + + /* Timer for measuring required decoder settling time before we're + allowed to fire it up again. */ + struct timer_list quiescent_timer; + + /* Timer for measuring decoder stabilization time, which is the + amount of time we need to let the decoder run before we can + trust its output (otherwise the encoder might see garbage and + then fail to start correctly). */ + struct timer_list decoder_stabilization_timer; + + /* Timer for measuring encoder pre-wait time */ + struct timer_list encoder_wait_timer; + + /* Timer for measuring encoder minimum run time */ + struct timer_list encoder_run_timer; + + /* Place to block while waiting for state changes */ + wait_queue_head_t state_wait_data; + + + int force_dirty; /* consider all controls dirty if true */ + int flag_ok; /* device in known good state */ + int flag_modulefail; /* true if at least one module failed to load */ + int flag_disconnected; /* flag_ok == 0 due to disconnect */ + int flag_init_ok; /* true if structure is fully initialized */ + int fw1_state; /* current situation with fw1 */ + int pathway_state; /* one of PVR2_PATHWAY_xxx */ + int flag_decoder_missed;/* We've noticed missing decoder */ + int flag_tripped; /* Indicates overall failure to start */ + + unsigned int decoder_client_id; + + // CPU firmware info (used to help find / save firmware data) + char *fw_buffer; + unsigned int fw_size; + int fw_cpu_flag; /* True if we are dealing with the CPU */ + + /* Tuner / frequency control stuff */ + unsigned int tuner_type; + int tuner_updated; + unsigned int freqValTelevision; /* Current freq for tv mode */ + unsigned int freqValRadio; /* Current freq for radio mode */ + unsigned int freqSlotTelevision; /* Current slot for tv mode */ + unsigned int freqSlotRadio; /* Current slot for radio mode */ + unsigned int freqSelector; /* 0=radio 1=television */ + int freqDirty; + + /* Current tuner info - this information is polled from the I2C bus */ + struct v4l2_tuner tuner_signal_info; + int tuner_signal_stale; + + /* Cropping capability info */ + struct v4l2_cropcap cropcap_info; + int cropcap_stale; + + /* Video standard handling */ + v4l2_std_id std_mask_eeprom; // Hardware supported selections + v4l2_std_id std_mask_avail; // Which standards we may select from + v4l2_std_id std_mask_cur; // Currently selected standard(s) + int std_enum_cur; // selected standard enumeration value + int std_dirty; // True if std_mask_cur has changed + struct pvr2_ctl_info std_info_enum; + struct pvr2_ctl_info std_info_avail; + struct pvr2_ctl_info std_info_cur; + struct pvr2_ctl_info std_info_detect; + + // Generated string names, one per actual V4L2 standard + const char *std_mask_ptrs[32]; + char std_mask_names[32][16]; + + int unit_number; /* ID for driver instance */ + unsigned long serial_number; /* ID for hardware itself */ + + char bus_info[32]; /* Bus location info */ + + /* Minor numbers used by v4l logic (yes, this is a hack, as there + should be no v4l junk here). Probably a better way to do this. */ + int v4l_minor_number_video; + int v4l_minor_number_vbi; + int v4l_minor_number_radio; + + /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */ + unsigned int input_avail_mask; + /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */ + unsigned int input_allowed_mask; + + /* Location of eeprom or a negative number if none */ + int eeprom_addr; + + enum pvr2_config active_stream_type; + enum pvr2_config desired_stream_type; + + /* Control state needed for cx2341x module */ + struct cx2341x_mpeg_params enc_cur_state; + struct cx2341x_mpeg_params enc_ctl_state; + /* True if an encoder attribute has changed */ + int enc_stale; + /* True if an unsafe encoder attribute has changed */ + int enc_unsafe_stale; + /* True if enc_cur_state is valid */ + int enc_cur_valid; + + /* Control state */ +#define VCREATE_DATA(lab) int lab##_val; int lab##_dirty + VCREATE_DATA(brightness); + VCREATE_DATA(contrast); + VCREATE_DATA(saturation); + VCREATE_DATA(hue); + VCREATE_DATA(volume); + VCREATE_DATA(balance); + VCREATE_DATA(bass); + VCREATE_DATA(treble); + VCREATE_DATA(mute); + VCREATE_DATA(cropl); + VCREATE_DATA(cropt); + VCREATE_DATA(cropw); + VCREATE_DATA(croph); + VCREATE_DATA(input); + VCREATE_DATA(audiomode); + VCREATE_DATA(res_hor); + VCREATE_DATA(res_ver); + VCREATE_DATA(srate); +#undef VCREATE_DATA + + struct pvr2_ctld_info *mpeg_ctrl_info; + + struct pvr2_ctrl *controls; + unsigned int control_cnt; +}; + +/* This function gets the current frequency */ +unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *); + +void pvr2_hdw_status_poll(struct pvr2_hdw *); + +#endif /* __PVRUSB2_HDW_INTERNAL_H */ + +/* + Stuff for Emacs to see, in order to encourage consistent editing style: + *** Local Variables: *** + *** mode: c *** + *** fill-column: 75 *** + *** tab-width: 8 *** + *** c-basic-offset: 8 *** + *** End: *** + */ |