diff options
Diffstat (limited to 'drivers/media/video/cx18/cx18-driver.h')
| -rw-r--r-- | drivers/media/video/cx18/cx18-driver.h | 258 |
1 files changed, 192 insertions, 66 deletions
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 0d2edebc39b4..ece4f281ef42 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -48,6 +48,7 @@ #include <linux/dvb/audio.h> #include <media/v4l2-common.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> #include <media/tuner.h> #include "cx18-mailbox.h" #include "cx18-av-core.h" @@ -79,7 +80,7 @@ #define CX18_CARD_YUAN_MPC718 3 /* Yuan MPC718 */ #define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */ #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/ -#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */ +#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100/DVR3100 H */ #define CX18_CARD_LAST 6 #define CX18_ENC_STREAM_TYPE_MPG 0 @@ -143,12 +144,12 @@ /* Flag to turn on high volume debugging */ #define CX18_DBGFLG_HIGHVOL (1 << 8) -/* NOTE: extra space before comma in 'cx->num , ## args' is required for +/* NOTE: extra space before comma in 'fmt , ## args' is required for gcc-2.95, otherwise it won't compile. */ #define CX18_DEBUG(x, type, fmt, args...) \ do { \ if ((x) & cx18_debug) \ - printk(KERN_INFO "cx18-%d " type ": " fmt, cx->num , ## args); \ + v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \ } while (0) #define CX18_DEBUG_WARN(fmt, args...) CX18_DEBUG(CX18_DBGFLG_WARN, "warning", fmt , ## args) #define CX18_DEBUG_INFO(fmt, args...) CX18_DEBUG(CX18_DBGFLG_INFO, "info", fmt , ## args) @@ -162,7 +163,7 @@ #define CX18_DEBUG_HIGH_VOL(x, type, fmt, args...) \ do { \ if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \ - printk(KERN_INFO "cx18%d " type ": " fmt, cx->num , ## args); \ + v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \ } while (0) #define CX18_DEBUG_HI_WARN(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_WARN, "warning", fmt , ## args) #define CX18_DEBUG_HI_INFO(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_INFO, "info", fmt , ## args) @@ -174,9 +175,58 @@ #define CX18_DEBUG_HI_IRQ(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IRQ, "irq", fmt , ## args) /* Standard kernel messages */ -#define CX18_ERR(fmt, args...) printk(KERN_ERR "cx18-%d: " fmt, cx->num , ## args) -#define CX18_WARN(fmt, args...) printk(KERN_WARNING "cx18-%d: " fmt, cx->num , ## args) -#define CX18_INFO(fmt, args...) printk(KERN_INFO "cx18-%d: " fmt, cx->num , ## args) +#define CX18_ERR(fmt, args...) v4l2_err(&cx->v4l2_dev, fmt , ## args) +#define CX18_WARN(fmt, args...) v4l2_warn(&cx->v4l2_dev, fmt , ## args) +#define CX18_INFO(fmt, args...) v4l2_info(&cx->v4l2_dev, fmt , ## args) + +/* Messages for internal subdevs to use */ +#define CX18_DEBUG_DEV(x, dev, type, fmt, args...) \ + do { \ + if ((x) & cx18_debug) \ + v4l2_info(dev, " " type ": " fmt , ## args); \ + } while (0) +#define CX18_DEBUG_WARN_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args) +#define CX18_DEBUG_INFO_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args) +#define CX18_DEBUG_API_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args) +#define CX18_DEBUG_DMA_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args) +#define CX18_DEBUG_IOCTL_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args) +#define CX18_DEBUG_FILE_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args) +#define CX18_DEBUG_I2C_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args) +#define CX18_DEBUG_IRQ_DEV(dev, fmt, args...) \ + CX18_DEBUG_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args) + +#define CX18_DEBUG_HIGH_VOL_DEV(x, dev, type, fmt, args...) \ + do { \ + if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \ + v4l2_info(dev, " " type ": " fmt , ## args); \ + } while (0) +#define CX18_DEBUG_HI_WARN_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args) +#define CX18_DEBUG_HI_INFO_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args) +#define CX18_DEBUG_HI_API_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args) +#define CX18_DEBUG_HI_DMA_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args) +#define CX18_DEBUG_HI_IOCTL_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args) +#define CX18_DEBUG_HI_FILE_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args) +#define CX18_DEBUG_HI_I2C_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args) +#define CX18_DEBUG_HI_IRQ_DEV(dev, fmt, args...) \ + CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args) + +#define CX18_ERR_DEV(dev, fmt, args...) v4l2_err(dev, fmt , ## args) +#define CX18_WARN_DEV(dev, fmt, args...) v4l2_warn(dev, fmt , ## args) +#define CX18_INFO_DEV(dev, fmt, args...) v4l2_info(dev, fmt , ## args) /* Values for CX18_API_DEC_PLAYBACK_SPEED mpeg_frame_type_mask parameter: */ #define MPEG_FRAME_TYPE_IFRAME 1 @@ -279,7 +329,7 @@ struct cx18_epu_work_order { struct cx18_stream { /* These first four fields are always set, even if the stream is not actually created. */ - struct video_device *v4l2dev; /* NULL when stream not created */ + struct video_device *video_dev; /* NULL when stream not created */ struct cx18 *cx; /* for ease of use */ const char *name; /* name of the stream */ int type; /* stream type */ @@ -292,7 +342,6 @@ struct cx18_stream { int dma; /* can be PCI_DMA_TODEVICE, PCI_DMA_FROMDEVICE or PCI_DMA_NONE */ - u64 dma_pts; wait_queue_head_t waitq; /* Buffer Stats */ @@ -318,59 +367,121 @@ struct cx18_open_id { /* forward declaration of struct defined in cx18-cards.h */ struct cx18_card; +/* + * A note about "sliced" VBI data as implemented in this driver: + * + * Currently we collect the sliced VBI in the form of Ancillary Data + * packets, inserted by the AV core decoder/digitizer/slicer in the + * horizontal blanking region of the VBI lines, in "raw" mode as far as + * the Encoder is concerned. We don't ever tell the Encoder itself + * to provide sliced VBI. (AV Core: sliced mode - Encoder: raw mode) + * + * We then process the ancillary data ourselves to send the sliced data + * to the user application directly or build up MPEG-2 private stream 1 + * packets to splice into (only!) MPEG-2 PS streams for the user app. + * + * (That's how ivtv essentially does it.) + * + * The Encoder should be able to extract certain sliced VBI data for + * us and provide it in a separate stream or splice it into any type of + * MPEG PS or TS stream, but this isn't implemented yet. + */ + +/* + * Number of "raw" VBI samples per horizontal line we tell the Encoder to + * grab from the decoder/digitizer/slicer output for raw or sliced VBI. + * It depends on the pixel clock and the horiz rate: + * + * (1/Fh)*(2*Fp) = Samples/line + * = 4 bytes EAV + Anc data in hblank + 4 bytes SAV + active samples + * + * Sliced VBI data is sent as ancillary data during horizontal blanking + * Raw VBI is sent as active video samples during vertcal blanking + * + * We use a BT.656 pxiel clock of 13.5 MHz and a BT.656 active line + * length of 720 pixels @ 4:2:2 sampling. Thus... + * + * For systems that use a 15.734 kHz horizontal rate, such as + * NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have: + * + * (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line = + * 4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples + * + * For systems that use a 15.625 kHz horizontal rate, such as + * PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have: + * + * (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line = + * 4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples + */ +static const u32 vbi_active_samples = 1444; /* 4 byte SAV + 720 Y + 720 U/V */ +static const u32 vbi_hblank_samples_60Hz = 272; /* 4 byte EAV + 268 anc/fill */ +static const u32 vbi_hblank_samples_50Hz = 284; /* 4 byte EAV + 280 anc/fill */ #define CX18_VBI_FRAMES 32 -/* VBI data */ struct vbi_info { - u32 enc_size; - u32 frame; - u8 cc_data_odd[256]; - u8 cc_data_even[256]; - int cc_pos; - u8 cc_no_update; - u8 vps[5]; - u8 vps_found; - int wss; - u8 wss_found; - u8 wss_no_update; - u32 raw_decoder_line_size; - u8 raw_decoder_sav_odd_field; - u8 raw_decoder_sav_even_field; - u32 sliced_decoder_line_size; - u8 sliced_decoder_sav_odd_field; - u8 sliced_decoder_sav_even_field; + /* Current state of v4l2 VBI settings for this device */ struct v4l2_format in; - /* convenience pointer to sliced struct in vbi_in union */ - struct v4l2_sliced_vbi_format *sliced_in; - u32 service_set_in; - int insert_mpeg; + struct v4l2_sliced_vbi_format *sliced_in; /* pointer to in.fmt.sliced */ + u32 count; /* Count of VBI data lines: 60 Hz: 12 or 50 Hz: 18 */ + u32 start[2]; /* First VBI data line per field: 10 & 273 or 6 & 318 */ - /* Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines. - One for /dev/vbi0 and one for /dev/vbi8 */ - struct v4l2_sliced_vbi_data sliced_data[36]; + u32 frame; /* Count of VBI buffers/frames received from Encoder */ - /* Buffer for VBI data inserted into MPEG stream. - The first byte is a dummy byte that's never used. - The next 16 bytes contain the MPEG header for the VBI data, - the remainder is the actual VBI data. - The max size accepted by the MPEG VBI reinsertion turns out - to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes, - where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is - a single line header byte and 2 * 18 is the number of VBI lines per frame. + /* + * Vars for creation and insertion of MPEG Private Stream 1 packets + * of sliced VBI data into an MPEG PS + */ - However, it seems that the data must be 1K aligned, so we have to - pad the data until the 1 or 2 K boundary. + /* Boolean: create and insert Private Stream 1 packets into the PS */ + int insert_mpeg; + + /* + * Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines. + * Used in cx18-vbi.c only for collecting sliced data, and as a source + * during conversion of sliced VBI data into MPEG Priv Stream 1 packets. + * We don't need to save state here, but the array may have been a bit + * too big (2304 bytes) to alloc from the stack. + */ + struct v4l2_sliced_vbi_data sliced_data[36]; - This pointer array will allocate 2049 bytes to store each VBI frame. */ + /* + * A ring buffer of driver-generated MPEG-2 PS + * Program Pack/Private Stream 1 packets for sliced VBI data insertion + * into the MPEG PS stream. + * + * In each sliced_mpeg_data[] buffer is: + * 16 byte MPEG-2 PS Program Pack Header + * 16 byte MPEG-2 Private Stream 1 PES Header + * 4 byte magic number: "itv0" or "ITV0" + * 4 byte first field line mask, if "itv0" + * 4 byte second field line mask, if "itv0" + * 36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data + * + * Each line in the payload is + * 1 byte line header derived from the SDID (WSS, CC, VPS, etc.) + * 42 bytes of line data + * + * That's a maximum 1552 bytes of payload in the Private Stream 1 packet + * which is the payload size a PVR-350 (CX23415) MPEG decoder will + * accept for VBI data. So, including the headers, it's a maximum 1584 + * bytes total. + */ +#define CX18_SLICED_MPEG_DATA_MAXSZ 1584 + /* copy_vbi_buf() needs 8 temp bytes on the end for the worst case */ +#define CX18_SLICED_MPEG_DATA_BUFSZ (CX18_SLICED_MPEG_DATA_MAXSZ+8) u8 *sliced_mpeg_data[CX18_VBI_FRAMES]; u32 sliced_mpeg_size[CX18_VBI_FRAMES]; - struct cx18_buffer sliced_mpeg_buf; + + /* Count of Program Pack/Program Stream 1 packets inserted into PS */ u32 inserted_frame; - u32 start[2], count; - u32 raw_size; - u32 sliced_size; + /* + * A dummy driver stream transfer buffer with a copy of the next + * sliced_mpeg_data[] buffer for output to userland apps. + * Only used in cx18-fileops.c, but its state needs to persist at times. + */ + struct cx18_buffer sliced_mpeg_buf; }; /* Per cx23418, per I2C bus private algo callback data */ @@ -383,16 +494,17 @@ struct cx18_i2c_algo_callback_data { /* Struct to hold info about cx18 cards */ struct cx18 { - int num; /* board number, -1 during init! */ - char name[8]; /* board name for printk and interrupts (e.g. 'cx180') */ - struct pci_dev *dev; /* PCI device */ + int instance; + struct pci_dev *pci_dev; + struct v4l2_device v4l2_dev; + struct v4l2_subdev *sd_av; /* A/V decoder/digitizer sub-device */ + struct v4l2_subdev *sd_extmux; /* External multiplexer sub-dev */ + const struct cx18_card *card; /* card information */ const char *card_name; /* full name of the card */ const struct cx18_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */ u8 is_50hz; u8 is_60hz; - u8 is_out_50hz; - u8 is_out_60hz; u8 nof_inputs; /* number of video inputs */ u8 nof_audio_inputs; /* number of audio inputs */ u16 buffer_id; /* buffer ID counter */ @@ -413,10 +525,7 @@ struct cx18 { /* dualwatch */ unsigned long dualwatch_jiffies; - u16 dualwatch_stereo_mode; - - /* Digitizer type */ - int digitizer; /* 0x00EF = saa7114 0x00FO = saa7115 0x0106 = mic */ + u32 dualwatch_stereo_mode; struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */ struct cx18_options options; /* User options */ @@ -426,7 +535,6 @@ struct cx18 { unsigned long i_flags; /* global cx18 flags */ atomic_t ana_capturing; /* count number of active analog capture streams */ atomic_t tot_capturing; /* total count number of active capture streams */ - spinlock_t lock; /* lock access to this struct */ int search_pack_header; int open_id; /* incremented each time an open occurs, used as @@ -468,30 +576,30 @@ struct cx18 { struct i2c_adapter i2c_adap[2]; struct i2c_algo_bit_data i2c_algo[2]; struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2]; - struct i2c_client i2c_client[2]; - struct mutex i2c_bus_lock[2]; - struct i2c_client *i2c_clients[I2C_CLIENTS_MAX]; /* gpio */ u32 gpio_dir; u32 gpio_val; struct mutex gpio_lock; + struct v4l2_subdev sd_gpiomux; + struct v4l2_subdev sd_resetctrl; /* v4l2 and User settings */ /* codec settings */ u32 audio_input; u32 active_input; - u32 active_output; v4l2_std_id std; v4l2_std_id tuner_std; /* The norm of the tuner (fixed) */ }; +static inline struct cx18 *to_cx18(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct cx18, v4l2_dev); +} + /* Globals */ -extern struct cx18 *cx18_cards[]; -extern int cx18_cards_active; extern int cx18_first_minor; -extern spinlock_t cx18_cards_lock; /*==============Prototypes==================*/ @@ -511,4 +619,22 @@ static inline int cx18_raw_vbi(const struct cx18 *cx) return cx->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE; } +/* Call the specified callback for all subdevs with a grp_id bit matching the + * mask in hw (if 0, then match them all). Ignore any errors. */ +#define cx18_call_hw(cx, hw, o, f, args...) \ + __v4l2_device_call_subdevs(&(cx)->v4l2_dev, \ + !(hw) || (sd->grp_id & (hw)), o, f , ##args) + +#define cx18_call_all(cx, o, f, args...) cx18_call_hw(cx, 0, o, f , ##args) + +/* Call the specified callback for all subdevs with a grp_id bit matching the + * mask in hw (if 0, then match them all). If the callback returns an error + * other than 0 or -ENOIOCTLCMD, then return with that error code. */ +#define cx18_call_hw_err(cx, hw, o, f, args...) \ + __v4l2_device_call_subdevs_until_err( \ + &(cx)->v4l2_dev, !(hw) || (sd->grp_id & (hw)), o, f , ##args) + +#define cx18_call_all_err(cx, o, f, args...) \ + cx18_call_hw_err(cx, 0, o, f , ##args) + #endif /* CX18_DRIVER_H */ |