diff options
Diffstat (limited to 'drivers/media/video/cx18/cx18-streams.c')
-rw-r--r-- | drivers/media/video/cx18/cx18-streams.c | 153 |
1 files changed, 105 insertions, 48 deletions
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index e5ff7705b7a1..89c1ec94f335 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -4,6 +4,7 @@ * Derived from ivtv-streams.c * * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> + * Copyright (C) 2008 Andy Walls <awalls@radix.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -36,13 +37,12 @@ #define CX18_DSP0_INTERRUPT_MASK 0xd0004C -static struct file_operations cx18_v4l2_enc_fops = { +static struct v4l2_file_operations cx18_v4l2_enc_fops = { .owner = THIS_MODULE, .read = cx18_v4l2_read, .open = cx18_v4l2_open, /* FIXME change to video_ioctl2 if serialization lock can be removed */ .ioctl = cx18_v4l2_ioctl, - .compat_ioctl = v4l_compat_ioctl32, .release = cx18_v4l2_close, .poll = cx18_v4l2_enc_poll, }; @@ -60,49 +60,41 @@ static struct { int num_offset; int dma; enum v4l2_buf_type buf_type; - struct file_operations *fops; } cx18_stream_info[] = { { /* CX18_ENC_STREAM_TYPE_MPG */ "encoder MPEG", VFL_TYPE_GRABBER, 0, PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, - &cx18_v4l2_enc_fops }, { /* CX18_ENC_STREAM_TYPE_TS */ "TS", VFL_TYPE_GRABBER, -1, PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, - &cx18_v4l2_enc_fops }, { /* CX18_ENC_STREAM_TYPE_YUV */ "encoder YUV", VFL_TYPE_GRABBER, CX18_V4L2_ENC_YUV_OFFSET, PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, - &cx18_v4l2_enc_fops }, { /* CX18_ENC_STREAM_TYPE_VBI */ "encoder VBI", VFL_TYPE_VBI, 0, PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VBI_CAPTURE, - &cx18_v4l2_enc_fops }, { /* CX18_ENC_STREAM_TYPE_PCM */ "encoder PCM audio", VFL_TYPE_GRABBER, CX18_V4L2_ENC_PCM_OFFSET, PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_PRIVATE, - &cx18_v4l2_enc_fops }, { /* CX18_ENC_STREAM_TYPE_IDX */ "encoder IDX", VFL_TYPE_GRABBER, -1, PCI_DMA_FROMDEVICE, V4L2_BUF_TYPE_VIDEO_CAPTURE, - &cx18_v4l2_enc_fops }, { /* CX18_ENC_STREAM_TYPE_RAD */ "encoder radio", VFL_TYPE_RADIO, 0, PCI_DMA_NONE, V4L2_BUF_TYPE_PRIVATE, - &cx18_v4l2_enc_fops }, }; @@ -110,7 +102,6 @@ static void cx18_stream_init(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; struct video_device *dev = s->v4l2dev; - u32 max_size = cx->options.megabytes[type] * 1024 * 1024; /* we need to keep v4l2dev, so restore it afterwards */ memset(s, 0, sizeof(*s)); @@ -123,21 +114,15 @@ static void cx18_stream_init(struct cx18 *cx, int type) s->handle = CX18_INVALID_TASK_HANDLE; s->dma = cx18_stream_info[type].dma; + s->buffers = cx->stream_buffers[type]; s->buf_size = cx->stream_buf_size[type]; - if (s->buf_size) - s->buffers = max_size / s->buf_size; - if (s->buffers > 63) { - /* Each stream has a maximum of 63 buffers, - ensure we do not exceed that. */ - s->buffers = 63; - s->buf_size = (max_size / s->buffers) & ~0xfff; - } - spin_lock_init(&s->qlock); + + mutex_init(&s->qlock); init_waitqueue_head(&s->waitq); s->id = -1; cx18_queue_init(&s->q_free); + cx18_queue_init(&s->q_busy); cx18_queue_init(&s->q_full); - cx18_queue_init(&s->q_io); } static int cx18_prep_dev(struct cx18 *cx, int type) @@ -167,7 +152,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type) /* User explicitly selected 0 buffers for these streams, so don't create them. */ if (cx18_stream_info[type].dma != PCI_DMA_NONE && - cx->options.megabytes[type] == 0) { + cx->stream_buffers[type] == 0) { CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name); return 0; } @@ -190,7 +175,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type) s->v4l2dev->num = num; s->v4l2dev->parent = &cx->dev->dev; - s->v4l2dev->fops = cx18_stream_info[type].fops; + s->v4l2dev->fops = &cx18_v4l2_enc_fops; s->v4l2dev->release = video_device_release; s->v4l2dev->tvnorms = V4L2_STD_ALL; cx18_set_funcs(s->v4l2dev); @@ -267,8 +252,9 @@ static int cx18_reg_dev(struct cx18 *cx, int type) switch (vfl_type) { case VFL_TYPE_GRABBER: - CX18_INFO("Registered device video%d for %s (%d MB)\n", - num, s->name, cx->options.megabytes[type]); + CX18_INFO("Registered device video%d for %s (%d x %d kB)\n", + num, s->name, cx->stream_buffers[type], + cx->stream_buf_size[type]/1024); break; case VFL_TYPE_RADIO: @@ -277,10 +263,11 @@ static int cx18_reg_dev(struct cx18 *cx, int type) break; case VFL_TYPE_VBI: - if (cx->options.megabytes[type]) - CX18_INFO("Registered device vbi%d for %s (%d MB)\n", - num, - s->name, cx->options.megabytes[type]); + if (cx->stream_buffers[type]) + CX18_INFO("Registered device vbi%d for %s " + "(%d x %d bytes)\n", + num, s->name, cx->stream_buffers[type], + cx->stream_buf_size[type]); else CX18_INFO("Registered device vbi%d for %s\n", num, s->name); @@ -344,7 +331,7 @@ void cx18_streams_cleanup(struct cx18 *cx, int unregister) static void cx18_vbi_setup(struct cx18_stream *s) { struct cx18 *cx = s->cx; - int raw = cx->vbi.sliced_in->service_set == 0; + int raw = cx18_raw_vbi(cx); u32 data[CX2341X_MBOX_MAX_DATA]; int lines; @@ -362,8 +349,7 @@ static void cx18_vbi_setup(struct cx18_stream *s) cx18_av_cmd(cx, VIDIOC_S_FMT, &cx->vbi.in); /* determine number of lines and total number of VBI bytes. - A raw line takes 1443 bytes: 2 * 720 + 4 byte frame header - 1 - The '- 1' byte is probably an unused U or V byte. Or something... + A raw line takes 1444 bytes: 4 byte SAV code + 2 * 720 A sliced line takes 51 bytes: 4 byte frame header, 4 byte internal header, 42 data bytes + checksum (to be confirmed) */ if (raw) { @@ -381,14 +367,15 @@ static void cx18_vbi_setup(struct cx18_stream *s) /* Lines per field */ data[1] = (lines / 2) | ((lines / 2) << 16); /* bytes per line */ - data[2] = (raw ? cx->vbi.raw_size : cx->vbi.sliced_size); + data[2] = (raw ? cx->vbi.raw_decoder_line_size + : cx->vbi.sliced_decoder_line_size); /* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */ data[3] = 1; /* Setup VBI for the cx25840 digitizer */ if (raw) { data[4] = 0x20602060; - data[5] = 0x30703070; + data[5] = 0x307090d0; } else { data[4] = 0xB0F0B0F0; data[5] = 0xA0E0A0E0; @@ -401,11 +388,52 @@ static void cx18_vbi_setup(struct cx18_stream *s) cx18_api(cx, CX18_CPU_SET_RAW_VBI_PARAM, 6, data); } +struct cx18_queue *cx18_stream_put_buf_fw(struct cx18_stream *s, + struct cx18_buffer *buf) +{ + struct cx18 *cx = s->cx; + struct cx18_queue *q; + + /* Don't give it to the firmware, if we're not running a capture */ + if (s->handle == CX18_INVALID_TASK_HANDLE || + !test_bit(CX18_F_S_STREAMING, &s->s_flags)) + return cx18_enqueue(s, buf, &s->q_free); + + q = cx18_enqueue(s, buf, &s->q_busy); + if (q != &s->q_busy) + return q; /* The firmware has the max buffers it can handle */ + + cx18_buf_sync_for_device(s, buf); + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, + (void __iomem *) &cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); + return q; +} + +void cx18_stream_load_fw_queue(struct cx18_stream *s) +{ + struct cx18_queue *q; + struct cx18_buffer *buf; + + if (atomic_read(&s->q_free.buffers) == 0 || + atomic_read(&s->q_busy.buffers) >= CX18_MAX_FW_MDLS_PER_STREAM) + return; + + /* Move from q_free to q_busy notifying the firmware, until the limit */ + do { + buf = cx18_dequeue(s, &s->q_free); + if (buf == NULL) + break; + q = cx18_stream_put_buf_fw(s, buf); + } while (atomic_read(&s->q_busy.buffers) < CX18_MAX_FW_MDLS_PER_STREAM + && q == &s->q_busy); +} + int cx18_start_v4l2_encode_stream(struct cx18_stream *s) { u32 data[MAX_MB_ARGUMENTS]; struct cx18 *cx = s->cx; - struct list_head *p; + struct cx18_buffer *buf; int ts = 0; int captype = 0; @@ -434,8 +462,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) captype = CAPTURE_CHANNEL_TYPE_PCM; break; case CX18_ENC_STREAM_TYPE_VBI: - captype = cx->vbi.sliced_in->service_set ? - CAPTURE_CHANNEL_TYPE_SLICED_VBI : CAPTURE_CHANNEL_TYPE_VBI; + captype = cx18_raw_vbi(cx) ? + CAPTURE_CHANNEL_TYPE_VBI : CAPTURE_CHANNEL_TYPE_SLICED_VBI; cx->vbi.frame = 0; cx->vbi.inserted_frame = 0; memset(cx->vbi.sliced_mpeg_size, @@ -457,6 +485,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); if (atomic_read(&cx->ana_capturing) == 0 && !ts) { + struct cx18_api_func_private priv; + /* Stuff from Windows, we don't know what it is */ cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); @@ -476,7 +506,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) cx18_vapi_result(cx, data, CX18_CPU_SET_INDEXTABLE, 1, 0); /* Setup API for Stream */ - cx2341x_update(cx, cx18_api_func, NULL, &cx->params); + priv.cx = cx; + priv.s = s; + cx2341x_update(&priv, cx18_api_func, NULL, &cx->params); } if (atomic_read(&cx->tot_capturing) == 0) { @@ -488,16 +520,17 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); - list_for_each(p, &s->q_free.list) { - struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); - + /* Init all the cpu_mdls for this stream */ + cx18_flush_queues(s); + mutex_lock(&s->qlock); + list_for_each_entry(buf, &s->q_free.list, list) { cx18_writel(cx, buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr); cx18_writel(cx, s->buf_size, &cx->scb->cpu_mdl[buf->id].length); - cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, - 1, buf->id, s->buf_size); } + mutex_unlock(&s->qlock); + cx18_stream_load_fw_queue(s); + /* begin_capture */ if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { CX18_DEBUG_WARN("Error starting capture!\n"); @@ -506,9 +539,15 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 2, s->handle, 1); else cx18_vapi(cx, CX18_CPU_CAPTURE_STOP, 1, s->handle); + clear_bit(CX18_F_S_STREAMING, &s->s_flags); + /* FIXME - CX18_F_S_STREAMOFF as well? */ cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); - /* FIXME - clean-up DSP0_INT mask, i_flags, s_flags, etc. */ + s->handle = CX18_INVALID_TASK_HANDLE; + if (atomic_read(&cx->tot_capturing) == 0) { + set_bit(CX18_F_I_EOS, &cx->i_flags); + cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK); + } return -EINVAL; } @@ -560,9 +599,6 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); } - /* Tell the CX23418 it can't use our buffers anymore */ - cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); - if (s->type != CX18_ENC_STREAM_TYPE_TS) atomic_dec(&cx->ana_capturing); atomic_dec(&cx->tot_capturing); @@ -570,6 +606,9 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) /* Clear capture and no-read bits */ clear_bit(CX18_F_S_STREAMING, &s->s_flags); + /* Tell the CX23418 it can't use our buffers anymore */ + cx18_vapi(cx, CX18_CPU_DE_RELEASE_MDL, 1, s->handle); + cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); s->handle = CX18_INVALID_TASK_HANDLE; @@ -595,3 +634,21 @@ u32 cx18_find_handle(struct cx18 *cx) } return CX18_INVALID_TASK_HANDLE; } + +struct cx18_stream *cx18_handle_to_stream(struct cx18 *cx, u32 handle) +{ + int i; + struct cx18_stream *s; + + if (handle == CX18_INVALID_TASK_HANDLE) + return NULL; + + for (i = 0; i < CX18_MAX_STREAMS; i++) { + s = &cx->streams[i]; + if (s->handle != handle) + continue; + if (s->v4l2dev || s->dvb.enabled) + return s; + } + return NULL; +} |