diff options
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-dvb.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-dvb.c | 59 |
1 files changed, 54 insertions, 5 deletions
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 86ac529e62be..45e13ee66dc7 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -255,15 +255,18 @@ static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { static struct tda18271_config hauppauge_tda18271_config = { .std_map = &hauppauge_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct tda18271_config hauppauge_hvr1200_tuner_config = { .std_map = &hauppauge_hvr1200_tda18271_std_map, .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct tda18271_config hauppauge_hvr1210_tuner_config = { .gate = TDA18271_GATE_DIGITAL, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct tda18271_std_map hauppauge_hvr127x_std_map = { @@ -275,6 +278,7 @@ static struct tda18271_std_map hauppauge_hvr127x_std_map = { static struct tda18271_config hauppauge_hvr127x_config = { .std_map = &hauppauge_hvr127x_std_map, + .output_opt = TDA18271_OUTPUT_LT_OFF, }; static struct lgdt3305_config hauppauge_lgdt3305_config = { @@ -396,7 +400,7 @@ static struct stv0900_reg stv0900_ts_regs[] = { static struct stv0900_config netup_stv0900_config = { .demod_address = 0x68, - .xtal = 27000000, + .xtal = 8000000, .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ .diseqc_mode = 2,/* 2/3 PWM */ .ts_config_regs = stv0900_ts_regs, @@ -408,14 +412,14 @@ static struct stv0900_config netup_stv0900_config = { static struct stv6110_config netup_stv6110_tunerconfig_a = { .i2c_address = 0x60, - .mclk = 27000000, - .iq_wiring = 0, + .mclk = 16000000, + .clk_div = 1, }; static struct stv6110_config netup_stv6110_tunerconfig_b = { .i2c_address = 0x63, - .mclk = 27000000, - .iq_wiring = 1, + .mclk = 16000000, + .clk_div = 1, }; static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) @@ -487,6 +491,26 @@ static int cx23885_dvb_set_frontend(struct dvb_frontend *fe, port->set_frontend_save(fe, param) : -ENODEV; } +static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = { + .prod = LGS8GXX_PROD_LGS8G75, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 6500, /* 6.50 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 1, + .adc_vpp = 2, /* 1.6 Vpp */ + .if_neg_edge = 1, +}; + +static struct xc5000_config magicpro_prohdtve2_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 6500, +}; + static int dvb_register(struct cx23885_tsport *port) { struct cx23885_dev *dev = port->dev; @@ -723,6 +747,7 @@ static int dvb_register(struct cx23885_tsport *port) } case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: i2c_bus = &dev->i2c_bus[0]; fe0->dvb.frontend = dvb_attach(zl10353_attach, @@ -833,6 +858,30 @@ static int dvb_register(struct cx23885_tsport *port) &mygica_x8506_xc5000_config); } break; + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &magicpro_prohdtve2_lgs8g75_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &magicpro_prohdtve2_xc5000_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[0].i2c_adap, + &hauppauge_tda18271_config); + break; + default: printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " " isn't supported yet\n", |