diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 207 |
1 files changed, 116 insertions, 91 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index aae7753fef11..50ccf3771204 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -36,7 +36,6 @@ #include <media/v4l2-common.h> #include "em28xx.h" -#include "tuner-xc2028.h" static int tuner = -1; module_param(tuner, int, 0444); @@ -52,26 +51,6 @@ struct em28xx_hash_table { unsigned int tuner; }; -/* Boards supported by driver */ - -#define EM2800_BOARD_UNKNOWN 0 -#define EM2820_BOARD_UNKNOWN 1 -#define EM2820_BOARD_TERRATEC_CINERGY_250 2 -#define EM2820_BOARD_PINNACLE_USB_2 3 -#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4 -#define EM2820_BOARD_MSI_VOX_USB_2 5 -#define EM2800_BOARD_TERRATEC_CINERGY_200 6 -#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7 -#define EM2800_BOARD_KWORLD_USB2800 8 -#define EM2820_BOARD_PINNACLE_DVC_90 9 -#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 10 -#define EM2880_BOARD_TERRATEC_HYBRID_XS 11 -#define EM2820_BOARD_KWORLD_PVRTV2800RF 12 -#define EM2880_BOARD_TERRATEC_PRODIGY_XS 13 -#define EM2820_BOARD_PROLINK_PLAYTV_USB2 14 -#define EM2800_BOARD_VGEAR_POCKETTV 15 -#define EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 16 - struct em28xx_board em28xx_boards[] = { [EM2800_BOARD_UNKNOWN] = { .name = "Unknown EM2800 video grabber", @@ -200,6 +179,7 @@ struct em28xx_board em28xx_boards[] = { .tuner_type = TUNER_XC2028, .mts_firmware = 1, .has_12mhz_i2s = 1, + .has_dvb = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -214,9 +194,6 @@ struct em28xx_board em28xx_boards[] = { .vmux = TVP5150_SVIDEO, .amux = 1, } }, - - /* gpio's 4, 1, 0 */ - .analog_gpio = 0x003d2d, }, [EM2880_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Hybrid XS", @@ -331,7 +308,7 @@ struct em28xx_board em28xx_boards[] = { .name = "Kworld USB2800", .is_em2800 = 1, .vchannels = 3, - .tuner_type = TUNER_PHILIPS_ATSC, + .tuner_type = TUNER_PHILIPS_FCV1236D, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA7113, .input = { { @@ -453,7 +430,36 @@ struct usb_device_id em28xx_id_table [] = { }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); -/* EEPROM hash table for devices with generic USB IDs */ +/* + * Reset sequences for analog/digital modes + */ + +/* Board Hauppauge WinTV HVR 900 analog */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { + {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10}, + {0x05, 0xff, 0x10, 10}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 digital */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { + {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10}, + {EM2880_R04_GPO, 0x04, 0x0f, 10}, + {EM2880_R04_GPO, 0x0c, 0x0f, 10}, + { -1, -1, -1, -1}, +}; + +/* Board Hauppauge WinTV HVR 900 tuner_callback */ +static struct em28xx_reg_seq hauppauge_wintv_hvr_900_tuner_callback[] = { + {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, + {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10}, + {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10}, + { -1, -1, -1, -1}, +}; + +/* + * EEPROM hash table for devices with generic USB IDs + */ static struct em28xx_hash_table em28xx_eeprom_hash [] = { /* P/N: SA 60002070465 Tuner: TVF7533-MF */ {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, @@ -465,79 +471,113 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = { {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, }; +int em28xx_tuner_callback(void *ptr, int command, int arg) +{ + int rc = 0; + struct em28xx *dev = ptr; + + if (dev->tuner_type != TUNER_XC2028) + return 0; + + if (command != XC2028_TUNER_RESET) + return 0; + + if (dev->mode == EM28XX_ANALOG_MODE) + rc = em28xx_gpio_set(dev, dev->tun_analog_gpio); + else + rc = em28xx_gpio_set(dev, dev->tun_digital_gpio); + + return rc; +} +EXPORT_SYMBOL_GPL(em28xx_tuner_callback); + +static void em28xx_set_model(struct em28xx *dev) +{ + dev->is_em2800 = em28xx_boards[dev->model].is_em2800; + dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx; + dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; + dev->decoder = em28xx_boards[dev->model].decoder; + dev->video_inputs = em28xx_boards[dev->model].vchannels; + dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; + dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; + dev->has_dvb = em28xx_boards[dev->model].has_dvb; +} + /* Since em28xx_pre_card_setup() requires a proper dev->model, * this won't work for boards with generic PCI IDs */ void em28xx_pre_card_setup(struct em28xx *dev) { + int rc; + + rc = em28xx_read_reg(dev, EM2880_R04_GPO); + if (rc >= 0) + dev->reg_gpo = rc; + + dev->wait_after_write = 5; + rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); + if (rc > 0) { + switch (rc) { + case CHIP_ID_EM2883: + em28xx_info("chip ID is em2882/em2883\n"); + dev->wait_after_write = 0; + break; + default: + em28xx_info("em28xx chip ID = %d\n", rc); + } + } + em28xx_set_model(dev); + /* request some modules */ switch (dev->model) { case EM2880_BOARD_TERRATEC_PRODIGY_XS: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: - case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: case EM2880_BOARD_TERRATEC_HYBRID_XS: - em28xx_write_regs(dev, XCLK_REG, "\x27", 1); - em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1); - em28xx_write_regs(dev, 0x08, "\xff", 1); - em28xx_write_regs(dev, 0x04, "\x00", 1); - msleep(100); - em28xx_write_regs(dev, 0x04, "\x08", 1); - msleep(100); - em28xx_write_regs(dev, 0x08, "\xff", 1); - msleep(50); - em28xx_write_regs(dev, 0x08, "\x2d", 1); + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: + em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1); + em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); msleep(50); - em28xx_write_regs(dev, 0x08, "\x3d", 1); + + /* Sets GPO/GPIO sequences for this device */ + dev->analog_gpio = hauppauge_wintv_hvr_900_analog; + dev->digital_gpio = hauppauge_wintv_hvr_900_digital; + dev->tun_analog_gpio = hauppauge_wintv_hvr_900_tuner_callback; + dev->tun_digital_gpio = hauppauge_wintv_hvr_900_tuner_callback; + break; } + + em28xx_gpio_set(dev, dev->tun_analog_gpio); + em28xx_set_mode(dev, EM28XX_ANALOG_MODE); + + /* Unlock device */ + em28xx_set_mode(dev, EM28XX_MODE_UNDEFINED); } -static int em28xx_tuner_callback(void *ptr, int command, int arg) +static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) { - int rc = 0; - struct em28xx *dev = ptr; + memset(ctl, 0, sizeof(*ctl)); - if (dev->tuner_type != TUNER_XC2028) - return 0; - - switch (command) { - case XC2028_TUNER_RESET: - { - /* GPIO and initialization codes for analog TV and radio - This code should be complemented for DTV, since reset - codes are different. - */ - - dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1); - dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1); - - if (dev->analog_gpio) { - char gpio0 = dev->analog_gpio & 0xff; - char gpio1 = (dev->analog_gpio >> 8) & 0xff; - char gpio4 = dev->analog_gpio >> 24; - - if (gpio4) { - dev->em28xx_write_regs(dev, 0x04, &gpio4, 1); - msleep(140); - } - - msleep(6); - dev->em28xx_write_regs(dev, 0x08, &gpio0, 1); - msleep(10); - dev->em28xx_write_regs(dev, 0x08, &gpio1, 1); - msleep(5); - } + ctl->fname = XC2028_DEFAULT_FIRMWARE; + ctl->max_len = 64; + ctl->mts = em28xx_boards[dev->model].mts_firmware; + switch (dev->model) { + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + ctl->demod = XC3028_FE_ZARLINK456; break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: + /* FIXME: Better to specify the needed IF */ + ctl->demod = XC3028_FE_DEFAULT; + break; + default: + ctl->demod = XC3028_FE_OREN538; } - } - return rc; } static void em28xx_config_tuner(struct em28xx *dev) { struct v4l2_priv_tun_config xc2028_cfg; - struct xc2028_ctrl ctl; struct tuner_setup tun_setup; struct v4l2_frequency f; @@ -552,11 +592,9 @@ static void em28xx_config_tuner(struct em28xx *dev) em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup); if (dev->tuner_type == TUNER_XC2028) { - memset(&ctl, 0, sizeof(ctl)); + struct xc2028_ctrl ctl; - ctl.fname = XC2028_DEFAULT_FIRMWARE; - ctl.max_len = 64; - ctl.mts = em28xx_boards[dev->model].mts_firmware; + em28xx_setup_xc3028(dev, &ctl); xc2028_cfg.tuner = TUNER_XC2028; xc2028_cfg.priv = &ctl; @@ -654,19 +692,6 @@ static int em28xx_hint_board(struct em28xx *dev) return -1; } - -static void em28xx_set_model(struct em28xx *dev) -{ - dev->is_em2800 = em28xx_boards[dev->model].is_em2800; - dev->has_msp34xx = em28xx_boards[dev->model].has_msp34xx; - dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf; - dev->decoder = em28xx_boards[dev->model].decoder; - dev->video_inputs = em28xx_boards[dev->model].vchannels; - dev->analog_gpio = em28xx_boards[dev->model].analog_gpio; - dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s; - dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480; -} - /* ----------------------------------------------------------------------- */ void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir) { |