diff options
Diffstat (limited to 'drivers/media/video/gspca/ov519.c')
| -rw-r--r-- | drivers/media/video/gspca/ov519.c | 1495 |
1 files changed, 1313 insertions, 182 deletions
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index a5c190e93799..ad9ec339981d 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -2,14 +2,19 @@ * OV519 driver * * Copyright (C) 2008 Jean-Francois Moine (http://moinejf.free.fr) + * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com> * * This module is adapted from the ov51x-jpeg package, which itself * was adapted from the ov511 driver. * * Original copyright for the ov511 driver is: * - * Copyright (c) 1999-2004 Mark W. McClelland + * Copyright (c) 1999-2006 Mark W. McClelland * Support for OV519, OV8610 Copyright (c) 2003 Joerg Heckenbach + * Many improvements by Bret Wallach <bwallac1@san.rr.com> + * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000) + * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> + * Changes by Claudio Matsuoka <claudio@conectiva.com> * * ov51x-jpeg original copyright is: * @@ -58,6 +63,8 @@ struct sd { #define BRIDGE_OV518 2 #define BRIDGE_OV518PLUS 3 #define BRIDGE_OV519 4 +#define BRIDGE_OVFX2 5 +#define BRIDGE_W9968CF 6 #define BRIDGE_MASK 7 char invert_led; @@ -73,6 +80,10 @@ struct sd { __u8 vflip; __u8 autobrightness; __u8 freq; + __u8 quality; +#define QUALITY_MIN 50 +#define QUALITY_MAX 70 +#define QUALITY_DEF 50 __u8 stopped; /* Streaming is temporarily paused */ @@ -81,17 +92,31 @@ struct sd { char sensor; /* Type of image sensor chip (SEN_*) */ #define SEN_UNKNOWN 0 -#define SEN_OV6620 1 -#define SEN_OV6630 2 -#define SEN_OV66308AF 3 -#define SEN_OV7610 4 -#define SEN_OV7620 5 -#define SEN_OV7640 6 -#define SEN_OV7670 7 -#define SEN_OV76BE 8 -#define SEN_OV8610 9 +#define SEN_OV2610 1 +#define SEN_OV3610 2 +#define SEN_OV6620 3 +#define SEN_OV6630 4 +#define SEN_OV66308AF 5 +#define SEN_OV7610 6 +#define SEN_OV7620 7 +#define SEN_OV7640 8 +#define SEN_OV7670 9 +#define SEN_OV76BE 10 +#define SEN_OV8610 11 + + u8 sensor_addr; + int sensor_width; + int sensor_height; + int sensor_reg_cache[256]; + + u8 *jpeg_hdr; }; +/* Note this is a bit of a hack, but the w9968cf driver needs the code for all + the ov sensors which is already present here. When we have the time we + really should move the sensor drivers to v4l2 sub drivers. */ +#include "w996Xcf.c" + /* V4L2 controls supported by the driver */ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val); static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val); @@ -345,6 +370,75 @@ static const struct v4l2_pix_format ov511_sif_mode[] = { .priv = 0}, }; +static const struct v4l2_pix_format ovfx2_vga_mode[] = { + {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, +}; +static const struct v4l2_pix_format ovfx2_cif_mode[] = { + {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 160, + .sizeimage = 160 * 120, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 3}, + {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 176, + .sizeimage = 176 * 144, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 320, + .sizeimage = 320 * 240, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 2}, + {352, 288, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 352, + .sizeimage = 352 * 288, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, +}; +static const struct v4l2_pix_format ovfx2_ov2610_mode[] = { + {1600, 1200, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1600, + .sizeimage = 1600 * 1200, + .colorspace = V4L2_COLORSPACE_SRGB}, +}; +static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { + {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 640, + .sizeimage = 640 * 480, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {800, 600, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 800, + .sizeimage = 800 * 600, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {1024, 768, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1024, + .sizeimage = 1024 * 768, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 1}, + {1600, 1200, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 1600, + .sizeimage = 1600 * 1200, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, + {2048, 1536, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE, + .bytesperline = 2048, + .sizeimage = 2048 * 1536, + .colorspace = V4L2_COLORSPACE_SRGB, + .priv = 0}, +}; + + /* Registers common to OV511 / OV518 */ #define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */ #define R51x_SYS_RESET 0x50 @@ -406,6 +500,30 @@ static const struct v4l2_pix_format ov511_sif_mode[] = { #define OV511_ENDPOINT_ADDRESS 1 /* Isoc endpoint number */ +/* + * The FX2 chip does not give us a zero length read at end of frame. + * It does, however, give a short read at the end of a frame, if + * neccessary, rather than run two frames together. + * + * By choosing the right bulk transfer size, we are guaranteed to always + * get a short read for the last read of each frame. Frame sizes are + * always a composite number (width * height, or a multiple) so if we + * choose a prime number, we are guaranteed that the last read of a + * frame will be short. + * + * But it isn't that easy: the 2.6 kernel requires a multiple of 4KB, + * otherwise EOVERFLOW "babbling" errors occur. I have not been able + * to figure out why. [PMiller] + * + * The constant (13 * 4096) is the largest "prime enough" number less than 64KB. + * + * It isn't enough to know the number of bytes per frame, in case we + * have data dropouts or buffer overruns (even though the FX2 double + * buffers, there are some pretty strict real time constraints for + * isochronous transfer for larger frame sizes). + */ +#define OVFX2_BULK_SIZE (13 * 4096) + /* I2C registers */ #define R51x_I2C_W_SID 0x41 #define R51x_I2C_SADDR_3 0x42 @@ -413,9 +531,11 @@ static const struct v4l2_pix_format ov511_sif_mode[] = { #define R51x_I2C_R_SID 0x44 #define R51x_I2C_DATA 0x45 #define R518_I2C_CTL 0x47 /* OV518(+) only */ +#define OVFX2_I2C_ADDR 0x00 /* I2C ADDRESSES */ #define OV7xx0_SID 0x42 +#define OV_HIRES_SID 0x60 /* OV9xxx / OV2xxx / OV3xxx */ #define OV8xx0_SID 0xa0 #define OV6xx0_SID 0xc0 @@ -508,6 +628,696 @@ struct ov_i2c_regvals { __u8 val; }; +/* Settings for OV2610 camera chip */ +static const struct ov_i2c_regvals norm_2610[] = +{ + { 0x12, 0x80 }, /* reset */ +}; + +static const struct ov_i2c_regvals norm_3620b[] = +{ + /* + * From the datasheet: "Note that after writing to register COMH + * (0x12) to change the sensor mode, registers related to the + * sensor’s cropping window will be reset back to their default + * values." + * + * "wait 4096 external clock ... to make sure the sensor is + * stable and ready to access registers" i.e. 160us at 24MHz + */ + + { 0x12, 0x80 }, /* COMH reset */ + { 0x12, 0x00 }, /* QXGA, master */ + + /* + * 11 CLKRC "Clock Rate Control" + * [7] internal frequency doublers: on + * [6] video port mode: master + * [5:0] clock divider: 1 + */ + { 0x11, 0x80 }, + + /* + * 13 COMI "Common Control I" + * = 192 (0xC0) 11000000 + * COMI[7] "AEC speed selection" + * = 1 (0x01) 1....... "Faster AEC correction" + * COMI[6] "AEC speed step selection" + * = 1 (0x01) .1...... "Big steps, fast" + * COMI[5] "Banding filter on off" + * = 0 (0x00) ..0..... "Off" + * COMI[4] "Banding filter option" + * = 0 (0x00) ...0.... "Main clock is 48 MHz and + * the PLL is ON" + * COMI[3] "Reserved" + * = 0 (0x00) ....0... + * COMI[2] "AGC auto manual control selection" + * = 0 (0x00) .....0.. "Manual" + * COMI[1] "AWB auto manual control selection" + * = 0 (0x00) ......0. "Manual" + * COMI[0] "Exposure control" + * = 0 (0x00) .......0 "Manual" + */ + { 0x13, 0xC0 }, + + /* + * 09 COMC "Common Control C" + * = 8 (0x08) 00001000 + * COMC[7:5] "Reserved" + * = 0 (0x00) 000..... + * COMC[4] "Sleep Mode Enable" + * = 0 (0x00) ...0.... "Normal mode" + * COMC[3:2] "Sensor sampling reset timing selection" + * = 2 (0x02) ....10.. "Longer reset time" + * COMC[1:0] "Output drive current select" + * = 0 (0x00) ......00 "Weakest" + */ + { 0x09, 0x08 }, + + /* + * 0C COMD "Common Control D" + * = 8 (0x08) 00001000 + * COMD[7] "Reserved" + * = 0 (0x00) 0....... + * COMD[6] "Swap MSB and LSB at the output port" + * = 0 (0x00) .0...... "False" + * COMD[5:3] "Reserved" + * = 1 (0x01) ..001... + * COMD[2] "Output Average On Off" + * = 0 (0x00) .....0.. "Output Normal" + * COMD[1] "Sensor precharge voltage selection" + * = 0 (0x00) ......0. "Selects internal + * reference precharge + * voltage" + * COMD[0] "Snapshot option" + * = 0 (0x00) .......0 "Enable live video output + * after snapshot sequence" + */ + { 0x0c, 0x08 }, + + /* + * 0D COME "Common Control E" + * = 161 (0xA1) 10100001 + * COME[7] "Output average option" + * = 1 (0x01) 1....... "Output average of 4 pixels" + * COME[6] "Anti-blooming control" + * = 0 (0x00) .0...... "Off" + * COME[5:3] "Reserved" + * = 4 (0x04) ..100... + * COME[2] "Clock output power down pin status" + * = 0 (0x00) .....0.. "Tri-state data output pin + * on power down" + * COME[1] "Data output pin status selection at power down" + * = 0 (0x00) ......0. "Tri-state VSYNC, PCLK, + * HREF, and CHSYNC pins on + * power down" + * COME[0] "Auto zero circuit select" + * = 1 (0x01) .......1 "On" + */ + { 0x0d, 0xA1 }, + + /* + * 0E COMF "Common Control F" + * = 112 (0x70) 01110000 + * COMF[7] "System clock selection" + * = 0 (0x00) 0....... "Use 24 MHz system clock" + * COMF[6:4] "Reserved" + * = 7 (0x07) .111.... + * COMF[3] "Manual auto negative offset canceling selection" + * = 0 (0x00) ....0... "Auto detect negative + * offset and cancel it" + * COMF[2:0] "Reserved" + * = 0 (0x00) .....000 + */ + { 0x0e, 0x70 }, + + /* + * 0F COMG "Common Control G" + * = 66 (0x42) 01000010 + * COMG[7] "Optical black output selection" + * = 0 (0x00) 0....... "Disable" + * COMG[6] "Black level calibrate selection" + * = 1 (0x01) .1...... "Use optical black pixels + * to calibrate" + * COMG[5:4] "Reserved" + * = 0 (0x00) ..00.... + * COMG[3] "Channel offset adjustment" + * = 0 (0x00) ....0... "Disable offset adjustment" + * COMG[2] "ADC black level calibration option" + * = 0 (0x00) .....0.. "Use B/G line and G/R + * line to calibrate each + * channel's black level" + * COMG[1] "Reserved" + * = 1 (0x01) ......1. + * COMG[0] "ADC black level calibration enable" + * = 0 (0x00) .......0 "Disable" + */ + { 0x0f, 0x42 }, + + /* + * 14 COMJ "Common Control J" + * = 198 (0xC6) 11000110 + * COMJ[7:6] "AGC gain ceiling" + * = 3 (0x03) 11...... "8x" + * COMJ[5:4] "Reserved" + * = 0 (0x00) ..00.... + * COMJ[3] "Auto banding filter" + * = 0 (0x00) ....0... "Banding filter is always + * on off depending on + * COMI[5] setting" + * COMJ[2] "VSYNC drop option" + * = 1 (0x01) .....1.. "SYNC is dropped if frame + * data is dropped" + * COMJ[1] "Frame data drop" + * = 1 (0x01) ......1. "Drop frame data if + * exposure is not within + * tolerance. In AEC mode, + * data is normally dropped + * when data is out of + * range." + * COMJ[0] "Reserved" + * = 0 (0x00) .......0 + */ + { 0x14, 0xC6 }, + + /* + * 15 COMK "Common Control K" + * = 2 (0x02) 00000010 + * COMK[7] "CHSYNC pin output swap" + * = 0 (0x00) 0....... "CHSYNC" + * COMK[6] "HREF pin output swap" + * = 0 (0x00) .0...... "HREF" + * COMK[5] "PCLK output selection" + * = 0 (0x00) ..0..... "PCLK always output" + * COMK[4] "PCLK edge selection" + * = 0 (0x00) ...0.... "Data valid on falling edge" + * COMK[3] "HREF output polarity" + * = 0 (0x00) ....0... "positive" + * COMK[2] "Reserved" + * = 0 (0x00) .....0.. + * COMK[1] "VSYNC polarity" + * = 1 (0x01) ......1. "negative" + * COMK[0] "HSYNC polarity" + * = 0 (0x00) .......0 "positive" + */ + { 0x15, 0x02 }, + + /* + * 33 CHLF "Current Control" + * = 9 (0x09) 00001001 + * CHLF[7:6] "Sensor current control" + * = 0 (0x00) 00...... + * CHLF[5] "Sensor current range control" + * = 0 (0x00) ..0..... "normal range" + * CHLF[4] "Sensor current" + * = 0 (0x00) ...0.... "normal current" + * CHLF[3] "Sensor buffer current control" + * = 1 (0x01) ....1... "half current" + * CHLF[2] "Column buffer current control" + * = 0 (0x00) .....0.. "normal current" + * CHLF[1] "Analog DSP current control" + * = 0 (0x00) ......0. "normal current" + * CHLF[1] "ADC current control" + * = 0 (0x00) ......0. "normal current" + */ + { 0x33, 0x09 }, + + /* + * 34 VBLM "Blooming Control" + * = 80 (0x50) 01010000 + * VBLM[7] "Hard soft reset switch" + * = 0 (0x00) 0....... "Hard reset" + * VBLM[6:4] "Blooming voltage selection" + * = 5 (0x05) .101.... + * VBLM[3:0] "Sensor current control" + * = 0 (0x00) ....0000 + */ + { 0x34, 0x50 }, + + /* + * 36 VCHG "Sensor Precharge Voltage Control" + * = 0 (0x00) 00000000 + * VCHG[7] "Reserved" + * = 0 (0x00) 0....... + * VCHG[6:4] "Sensor precharge voltage control" + * = 0 (0x00) .000.... + * VCHG[3:0] "Sensor array common reference" + * = 0 (0x00) ....0000 + */ + { 0x36, 0x00 }, + + /* + * 37 ADC "ADC Reference Control" + * = 4 (0x04) 00000100 + * ADC[7:4] "Reserved" + * = 0 (0x00) 0000.... + * ADC[3] "ADC input signal range" + * = 0 (0x00) ....0... "Input signal 1.0x" + * ADC[2:0] "ADC range control" + * = 4 (0x04) .....100 + */ + { 0x37, 0x04 }, + + /* + * 38 ACOM "Analog Common Ground" + * = 82 (0x52) 01010010 + * ACOM[7] "Analog gain control" + * = 0 (0x00) 0....... "Gain 1x" + * ACOM[6] "Analog black level calibration" + * = 1 (0x01) .1...... "On" + * ACOM[5:0] "Reserved" + * = 18 (0x12) ..010010 + */ + { 0x38, 0x52 }, + + /* + * 3A FREFA "Internal Reference Adjustment" + * = 0 (0x00) 00000000 + * FREFA[7:0] "Range" + * = 0 (0x00) 00000000 + */ + { 0x3a, 0x00 }, + + /* + * 3C FVOPT "Internal Reference Adjustment" + * = 31 (0x1F) 00011111 + * FVOPT[7:0] "Range" + * = 31 (0x1F) 00011111 + */ + { 0x3c, 0x1F }, + + /* + * 44 Undocumented = 0 (0x00) 00000000 + * 44[7:0] "It's a secret" + * = 0 (0x00) 00000000 + */ + { 0x44, 0x00 }, + + /* + * 40 Undocumented = 0 (0x00) 00000000 + * 40[7:0] "It's a secret" + * = 0 (0x00) 00000000 + */ + { 0x40, 0x00 }, + + /* + * 41 Undocumented = 0 (0x00) 00000000 + * 41[7:0] "It's a secret" + * = 0 (0x00) 00000000 + */ + { 0x41, 0x00 }, + + /* + * 42 Undocumented = 0 (0x00) 00000000 + * 42[7:0] "It's a secret" + * = 0 (0x00) 00000000 + */ + { 0x42, 0x00 }, + + /* + * 43 Undocumented = 0 (0x00) 00000000 + * 43[7:0] "It's a secret" + * = 0 (0x00) 00000000 + */ + { 0x43, 0x00 }, + + /* + * 45 Undocumented = 128 (0x80) 10000000 + * 45[7:0] "It's a secret" + * = 128 (0x80) 10000000 + */ + { 0x45, 0x80 }, + + /* + * 48 Undocumented = 192 (0xC0) 11000000 + * 48[7:0] "It's a secret" + * = 192 (0xC0) 11000000 + */ + { 0x48, 0xC0 }, + + /* + * 49 Undocumented = 25 (0x19) 00011001 + * 49[7:0] "It's a secret" + * = 25 (0x19) 00011001 + */ + { 0x49, 0x19 }, + + /* + * 4B Undocumented = 128 (0x80) 10000000 + * 4B[7:0] "It's a secret" + * = 128 (0x80) 10000000 + */ + { 0x4B, 0x80 }, + + /* + * 4D Undocumented = 196 (0xC4) 11000100 + * 4D[7:0] "It's a secret" + * = 196 (0xC4) 11000100 + */ + { 0x4D, 0xC4 }, + + /* + * 35 VREF "Reference Voltage Control" + * = 76 (0x4C) 01001100 + * VREF[7:5] "Column high reference control" + * = 2 (0x02) 010..... "higher voltage" + * VREF[4:2] "Column low reference control" + * = 3 (0x03) ...011.. "Highest voltage" + * VREF[1:0] "Reserved" + * = 0 (0x00) ......00 + */ + { 0x35, 0x4C }, + + /* + * 3D Undocumented = 0 (0x00) 00000000 + * 3D[7:0] "It's a secret" + * = 0 (0x00) 00000000 + */ + { 0x3D, 0x00 }, + + /* + * 3E Undocumented = 0 (0x00) 00000000 + * 3E[7:0] "It's a secret" + * = 0 (0x00) 00000000 + */ + { 0x3E, 0x00 }, + + /* + * 3B FREFB "Internal Reference Adjustment" + * = 24 (0x18) 00011000 + * FREFB[7:0] "Range" + * = 24 (0x18) 00011000 + */ + { 0x3b, 0x18 }, + + /* + * 33 CHLF "Current Control" + * = 25 (0x19) 00011001 + * CHLF[7:6] "Sensor current control" + * = 0 (0x00) 00...... + * CHLF[5] "Sensor current range control" + * = 0 (0x00) ..0..... "normal range" + * CHLF[4] "Sensor current" + * = 1 (0x01) ...1.... "double current" + * CHLF[3] "Sensor buffer current control" + * = 1 (0x01) ....1... "half current" + * CHLF[2] "Column buffer current control" + * = 0 (0x00) .....0.. "normal current" + * CHLF[1] "Analog DSP current control" + * = 0 (0x00) ......0. "normal current" + * CHLF[1] "ADC current control" + * = 0 (0x00) ......0. "normal current" + */ + { 0x33, 0x19 }, + + /* + * 34 VBLM "Blooming Control" + * = 90 (0x5A) 01011010 + * VBLM[7] "Hard soft reset switch" + * = 0 (0x00) 0....... "Hard reset" + * VBLM[6:4] "Blooming voltage selection" + * = 5 (0x05) .101.... + * VBLM[3:0] "Sensor current control" + * = 10 (0x0A) ....1010 + */ + { 0x34, 0x5A }, + + /* + * 3B FREFB "Internal Reference Adjustment" + * = 0 (0x00) 00000000 + * FREFB[7:0] "Range" + * = 0 (0x00) 00000000 + */ + { 0x3b, 0x00 }, + + /* + * 33 CHLF "Current Control" + * = 9 (0x09) 00001001 + * CHLF[7:6] "Sensor current control" + * = 0 (0x00) 00...... + * CHLF[5] "Sensor current range control" + * = 0 (0x00) ..0..... "normal range" + * CHLF[4] "Sensor current" + * = 0 (0x00) ...0.... "normal current" + * CHLF[3] "Sensor buffer current control" + * = 1 (0x01) ....1... "half current" + * CHLF[2] "Column buffer current control" + * = 0 (0x00) .....0.. "normal current" + * CHLF[1] "Analog DSP current control" + * = 0 (0x00) ......0. "normal current" + * CHLF[1] "ADC current control" + * = 0 (0x00) ......0. "normal current" + */ + { 0x33, 0x09 }, + + /* + * 34 VBLM "Blooming Control" + * = 80 (0x50) 01010000 + * VBLM[7] "Hard soft reset switch" + * = 0 (0x00) 0....... "Hard reset" + * VBLM[6:4] "Blooming voltage selection" + * = 5 (0x05) .101.... + * VBLM[3:0] "Sensor current control" + * = 0 (0x00) ....0000 + */ + { 0x34, 0x50 }, + + /* + * 12 COMH "Common Control H" + * = 64 (0x40) 01000000 + * COMH[7] "SRST" + * = 0 (0x00) 0....... "No-op" + * COMH[6:4] "Resolution selection" + * = 4 (0x04) .100.... "XGA" + * COMH[3] "Master slave selection" + * = 0 (0x00) ....0... "Master mode" + * COMH[2] "Internal B/R channel option" + * = 0 (0x00) .....0.. "B/R use same channel" + * COMH[1] "Color bar test pattern" + * = 0 (0x00) ......0. "Off" + * COMH[0] "Reserved" + * = 0 (0x00) .......0 + */ + { 0x12, 0x40 }, + + /* + * 17 HREFST "Horizontal window start" + * = 31 (0x1F) 00011111 + * HREFST[7:0] "Horizontal window start, 8 MSBs" + * = 31 (0x1F) 00011111 + */ + { 0x17, 0x1F }, + + /* + * 18 HREFEND "Horizontal window end" + * = 95 (0x5F) 01011111 + * HREFEND[7:0] "Horizontal Window End, 8 MSBs" + * = 95 (0x5F) 01011111 + */ + { 0x18, 0x5F }, + + /* + * 19 VSTRT "Vertical window start" + * = 0 (0x00) 00000000 + * VSTRT[7:0] "Vertical Window Start, 8 MSBs" + * = 0 (0x00) 00000000 + */ + { 0x19, 0x00 }, + + /* + * 1A VEND "Vertical window end" + * = 96 (0x60) 01100000 + * VEND[7:0] "Vertical Window End, 8 MSBs" + * = 96 (0x60) 01100000 + */ + { 0x1a, 0x60 }, + + /* + * 32 COMM "Common Control M" + * = 18 (0x12) 00010010 + * COMM[7:6] "Pixel clock divide option" + * = 0 (0x00) 00...... "/1" + * COMM[5:3] "Horizontal window end position, 3 LSBs" + * = 2 (0x02) ..010... + * COMM[2:0] "Horizontal window start position, 3 LSBs" + * = 2 (0x02) .....010 + */ + { 0x32, 0x12 }, + + /* + * 03 COMA "Common Control A" + * = 74 (0x4A) 01001010 + * COMA[7:4] "AWB Update Threshold" + * = 4 (0x04) 0100.... + * COMA[3:2] "Vertical window end line control 2 LSBs" + * = 2 (0x02) ....10.. + * COMA[1:0] "Vertical window start line control 2 LSBs" + * = 2 (0x02) ......10 + */ + { 0x03, 0x4A }, + + /* + * 11 CLKRC "Clock Rate Control" + * = 128 (0x80) 10000000 + * CLKRC[7] "Internal frequency doublers on off seclection" + * = 1 (0x01) 1....... "On" + * CLKRC[6] "Digital video master slave selection" + * = 0 (0x00) .0...... "Master mode, sensor + * provides PCLK" + * CLKRC[5:0] "Clock divider { CLK = PCLK/(1+CLKRC[5:0]) }" + * = 0 (0x00) ..000000 + */ + { 0x11, 0x80 }, + + /* + * 12 COMH "Common Control H" + * = 0 (0x00) 00000000 + * COMH[7] "SRST" + * = 0 (0x00) 0....... "No-op" + * COMH[6:4] "Resolution selection" + * = 0 (0x00) .000.... "QXGA" + * COMH[3] "Master slave selection" + * = 0 (0x00) ....0... "Master mode" + * COMH[2] "Internal B/R channel option" + * = 0 (0x00) .....0.. "B/R use same channel" + * COMH[1] "Color bar test pattern" + * = 0 (0x00) ......0. "Off" + * COMH[0] "Reserved" + * = 0 (0x00) .......0 + */ + { 0x12, 0x00 }, + + /* + * 12 COMH "Common Control H" + * = 64 (0x40) 01000000 + * COMH[7] "SRST" + * = 0 (0x00) 0....... "No-op" + * COMH[6:4] "Resolution selection" + * = 4 (0x04) .100.... "XGA" + * COMH[3] "Master slave selection" + * = 0 (0x00) ....0... "Master mode" + * COMH[2] "Internal B/R channel option" + * = 0 (0x00) .....0.. "B/R use same channel" + * COMH[1] "Color bar test pattern" + * = 0 (0x00) ......0. "Off" + * COMH[0] "Reserved" + * = 0 (0x00) .......0 + */ + { 0x12, 0x40 }, + + /* + * 17 HREFST "Horizontal window start" + * = 31 (0x1F) 00011111 + * HREFST[7:0] "Horizontal window start, 8 MSBs" + * = 31 (0x1F) 00011111 + */ + { 0x17, 0x1F }, + + /* + * 18 HREFEND "Horizontal window end" + * = 95 (0x5F) 01011111 + * HREFEND[7:0] "Horizontal Window End, 8 MSBs" + * = 95 (0x5F) 01011111 + */ + { 0x18, 0x5F }, + + /* + * 19 VSTRT "Vertical window start" + * = 0 (0x00) 00000000 + * VSTRT[7:0] "Vertical Window Start, 8 MSBs" + * = 0 (0x00) 00000000 + */ + { 0x19, 0x00 }, + + /* + * 1A VEND "Vertical window end" + * = 96 (0x60) 01100000 + * VEND[7:0] "Vertical Window End, 8 MSBs" + * = 96 (0x60) 01100000 + */ + { 0x1a, 0x60 }, + + /* + * 32 COMM "Common Control M" + * = 18 (0x12) 00010010 + * COMM[7:6] "Pixel clock divide option" + * = 0 (0x00) 00...... "/1" + * COMM[5:3] "Horizontal window end position, 3 LSBs" + * = 2 (0x02) ..010... + * COMM[2:0] "Horizontal window start position, 3 LSBs" + * = 2 (0x02) .....010 + */ + { 0x32, 0x12 }, + + /* + * 03 COMA "Common Control A" + * = 74 (0x4A) 01001010 + * COMA[7:4] "AWB Update Threshold" + * = 4 (0x04) 0100.... + * COMA[3:2] "Vertical window end line control 2 LSBs" + * = 2 (0x02) ....10.. + * COMA[1:0] "Vertical window start line control 2 LSBs" + * = 2 (0x02) ......10 + */ + { 0x03, 0x4A }, + + /* + * 02 RED "Red Gain Control" + * = 175 (0xAF) 10101111 + * RED[7] "Action" + * = 1 (0x01) 1....... "gain = 1/(1+bitrev([6:0]))" + * RED[6:0] "Value" + * = 47 (0x2F) .0101111 + */ + { 0x02, 0xAF }, + + /* + * 2D ADDVSL "VSYNC Pulse Width" + * = 210 (0xD2) 11010010 + * ADDVSL[7:0] "VSYNC pulse width, LSB" + * = 210 (0xD2) 11010010 + */ + { 0x2d, 0xD2 }, + + /* + * 00 GAIN = 24 (0x18) 00011000 + * GAIN[7:6] "Reserved" + * = 0 (0x00) 00...... + * GAIN[5] "Double" + * = 0 (0x00) ..0..... "False" + * GAIN[4] "Double" + * = 1 (0x01) ...1.... "True" + * GAIN[3:0] "Range" + * = 8 (0x08) ....1000 + */ + { 0x00, 0x18 }, + + /* + * 01 BLUE "Blue Gain Control" + * = 240 (0xF0) 11110000 + * BLUE[7] "Action" + * = 1 (0x01) 1....... "gain = 1/(1+bitrev([6:0]))" + * BLUE[6:0] "Value" + * = 112 (0x70) .1110000 + */ + { 0x01, 0xF0 }, + + /* + * 10 AEC "Automatic Exposure Control" + * = 10 (0x0A) 00001010 + * AEC[7:0] "Automatic Exposure Control, 8 MSBs" + * = 10 (0x0A) 00001010 + */ + { 0x10, 0x0A }, + + { 0xE1, 0x67 }, + { 0xE3, 0x03 }, + { 0xE4, 0x26 }, + { 0xE5, 0x3E }, + { 0xF8, 0x01 }, + { 0xFF, 0x01 }, +}; + static const struct ov_i2c_regvals norm_6x20[] = { { 0x12, 0x80 }, /* reset */ { 0x11, 0x01 }, @@ -678,6 +1488,7 @@ static const struct ov_i2c_regvals norm_7610[] = { }; static const struct ov_i2c_regvals norm_7620[] = { + { 0x12, 0x80 }, /* reset */ { 0x00, 0x00 }, /* gain */ { 0x01, 0x80 }, /* blue gain */ { 0x02, 0x80 }, /* red gain */ @@ -1042,10 +1853,28 @@ static unsigned char ov7670_abs_to_sm(unsigned char v) } /* Write a OV519 register */ -static int reg_w(struct sd *sd, __u16 index, __u8 value) +static int reg_w(struct sd *sd, __u16 index, __u16 value) { - int ret; - int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 2 : 1; + int ret, req = 0; + + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + req = 2; + break; + case BRIDGE_OVFX2: + req = 0x0a; + /* fall through */ + case BRIDGE_W9968CF: + ret = usb_control_msg(sd->gspca_dev.dev, + usb_sndctrlpipe(sd->gspca_dev.dev, 0), + req, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, index, NULL, 0, 500); + goto leave; + default: + req = 1; + } sd->gspca_dev.usb_buf[0] = value; ret = usb_control_msg(sd->gspca_dev.dev, @@ -1054,17 +1883,35 @@ static int reg_w(struct sd *sd, __u16 index, __u8 value) USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, sd->gspca_dev.usb_buf, 1, 500); - if (ret < 0) - PDEBUG(D_ERR, "Write reg [%02x] %02x failed", index, value); - return ret; +leave: + if (ret < 0) { + PDEBUG(D_ERR, "Write reg 0x%04x -> [0x%02x] failed", + value, index); + return ret; + } + + PDEBUG(D_USBO, "Write reg 0x%04x -> [0x%02x]", value, index); + return 0; } -/* Read from a OV519 register */ +/* Read from a OV519 register, note not valid for the w9968cf!! */ /* returns: negative is error, pos or zero is data */ static int reg_r(struct sd *sd, __u16 index) { int ret; - int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 3 : 1; + int req; + + switch (sd->bridge) { + case BRIDGE_OV511: + case BRIDGE_OV511PLUS: + req = 3; + break; + case BRIDGE_OVFX2: + req = 0x0b; + break; + default: + req = 1; + } ret = usb_control_msg(sd->gspca_dev.dev, usb_rcvctrlpipe(sd->gspca_dev.dev, 0), @@ -1072,10 +1919,12 @@ static int reg_r(struct sd *sd, __u16 index) USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, sd->gspca_dev.usb_buf, 1, 500); - if (ret >= 0) + if (ret >= 0) { ret = sd->gspca_dev.usb_buf[0]; - else + PDEBUG(D_USBI, "Read reg [0x%02X] -> 0x%04X", index, ret); + } else PDEBUG(D_ERR, "Read reg [0x%02x] failed", index); + return ret; } @@ -1095,6 +1944,7 @@ static int reg_r8(struct sd *sd, ret = sd->gspca_dev.usb_buf[0]; else PDEBUG(D_ERR, "Read reg 8 [0x%02x] failed", index); + return ret; } @@ -1140,9 +1990,12 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n) USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0, index, sd->gspca_dev.usb_buf, n, 500); - if (ret < 0) + if (ret < 0) { PDEBUG(D_ERR, "Write reg32 [%02x] %08x failed", index, value); - return ret; + return ret; + } + + return 0; } static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value) @@ -1324,32 +2177,110 @@ static int ov518_i2c_r(struct sd *sd, __u8 reg) return value; } +static int ovfx2_i2c_w(struct sd *sd, __u8 reg, __u8 value) +{ + int ret; + + ret = usb_control_msg(sd->gspca_dev.dev, + usb_sndctrlpipe(sd->gspca_dev.dev, 0), + 0x02, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + (__u16)value, (__u16)reg, NULL, 0, 500); + + if (ret < 0) { + PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg); + return ret; + } + + PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg); + return 0; +} + +static int ovfx2_i2c_r(struct sd *sd, __u8 reg) +{ + int ret; + + ret = usb_control_msg(sd->gspca_dev.dev, + usb_rcvctrlpipe(sd->gspca_dev.dev, 0), + 0x03, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, (__u16)reg, sd->gspca_dev.usb_buf, 1, 500); + + if (ret >= 0) { + ret = sd->gspca_dev.usb_buf[0]; + PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, ret); + } else + PDEBUG(D_ERR, "i2c read [0x%02x] failed", reg); + + return ret; +} + static int i2c_w(struct sd *sd, __u8 reg, __u8 value) { + int ret = -1; + + if (sd->sensor_reg_cache[reg] == value) + return 0; + switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: - return ov511_i2c_w(sd, reg, value); + ret = ov511_i2c_w(sd, reg, value); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: case BRIDGE_OV519: - return ov518_i2c_w(sd, reg, value); + ret = ov518_i2c_w(sd, reg, value); + break; + case BRIDGE_OVFX2: + ret = ovfx2_i2c_w(sd, reg, value); + break; + case BRIDGE_W9968CF: + ret = w9968cf_i2c_w(sd, reg, value); + break; } - return -1; /* Should never happen */ + + if (ret >= 0) { + /* Up on sensor reset empty the register cache */ + if (reg == 0x12 && (value & 0x80)) + memset(sd->sensor_reg_cache, -1, + sizeof(sd->sensor_reg_cache)); + else + sd->sensor_reg_cache[reg] = value; + } + + return ret; } static int i2c_r(struct sd *sd, __u8 reg) { + int ret = -1; + + if (sd->sensor_reg_cache[reg] != -1) + return sd->sensor_reg_cache[reg]; + switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: - return ov511_i2c_r(sd, reg); + ret = ov511_i2c_r(sd, reg); + break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: case BRIDGE_OV519: - return ov518_i2c_r(sd, reg); + ret = ov518_i2c_r(sd, reg); + break; + case BRIDGE_OVFX2: + ret = ovfx2_i2c_r(sd, reg); + break; + case BRIDGE_W9968CF: + ret = w9968cf_i2c_r(sd, reg); + break; } - return -1; /* Should never happen */ + + if (ret >= 0) + sd->sensor_reg_cache[reg] = ret; + + return ret; } /* Writes bits at positions specified by mask to an I2C reg. Bits that are in @@ -1389,6 +2320,10 @@ static inline int ov51x_stop(struct sd *sd) return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a); case BRIDGE_OV519: return reg_w(sd, OV519_SYS_RESET1, 0x0f); + case BRIDGE_OVFX2: + return reg_w_mask(sd, 0x0f, 0x00, 0x02); + case BRIDGE_W9968CF: + return reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */ } return 0; @@ -1418,18 +2353,27 @@ static inline int ov51x_restart(struct sd *sd) return reg_w(sd, R51x_SYS_RESET, 0x00); case BRIDGE_OV519: return reg_w(sd, OV519_SYS_RESET1, 0x00); + case BRIDGE_OVFX2: + return reg_w_mask(sd, 0x0f, 0x02, 0x02); + case BRIDGE_W9968CF: + return reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */ } return 0; } +static int ov51x_set_slave_ids(struct sd *sd, __u8 slave); + /* This does an initial reset of an OmniVision sensor and ensures that I2C * is synchronized. Returns <0 on failure. */ -static int init_ov_sensor(struct sd *sd) +static int init_ov_sensor(struct sd *sd, __u8 slave) { int i; + if (ov51x_set_slave_ids(sd, slave) < 0) + return -EIO; + /* Reset the sensor */ if (i2c_w(sd, 0x12, 0x80) < 0) return -EIO; @@ -1466,6 +2410,14 @@ static int ov51x_set_slave_ids(struct sd *sd, { int rc; + switch (sd->bridge) { + case BRIDGE_OVFX2: + return reg_w(sd, OVFX2_I2C_ADDR, slave); + case BRIDGE_W9968CF: + sd->sensor_addr = slave; + return 0; + } + rc = reg_w(sd, R51x_I2C_W_SID, slave); if (rc < 0) return rc; @@ -1508,6 +2460,39 @@ static int write_i2c_regvals(struct sd *sd, * ***************************************************************************/ +/* This initializes the OV2x10 / OV3610 / OV3620 */ +static int ov_hires_configure(struct sd *sd) +{ + int high, low; + + if (sd->bridge != BRIDGE_OVFX2) { + PDEBUG(D_ERR, "error hires sensors only supported with ovfx2"); + return -1; + } + + PDEBUG(D_PROBE, "starting ov hires configuration"); + + /* Detect sensor (sub)type */ + high = i2c_r(sd, 0x0a); + low = i2c_r(sd, 0x0b); + /* info("%x, %x", high, low); */ + if (high == 0x96 && low == 0x40) { + PDEBUG(D_PROBE, "Sensor is an OV2610"); + sd->sensor = SEN_OV2610; + } else if (high == 0x36 && (low & 0x0f) == 0x00) { + PDEBUG(D_PROBE, "Sensor is an OV3610"); + sd->sensor = SEN_OV3610; + } else { + PDEBUG(D_ERR, "Error unknown sensor type: 0x%02x%02x", + high, low); + return -1; + } + + /* Set sensor-specific vars */ + return 0; +} + + /* This initializes the OV8110, OV8610 sensor. The OV8110 uses * the same register settings as the OV8610, since they are very similar. */ @@ -1966,12 +2951,29 @@ static int ov519_configure(struct sd *sd) return write_regvals(sd, init_519, ARRAY_SIZE(init_519)); } +static int ovfx2_configure(struct sd *sd) +{ + static const struct ov_regvals init_fx2[] = { + { 0x00, 0x60 }, + { 0x02, 0x01 }, + { 0x0f, 0x1d }, + { 0xe9, 0x82 }, + { 0xea, 0xc7 }, + { 0xeb, 0x10 }, + { 0xec, 0xf6 }, + }; + + sd->stopped = 1; + + return write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2)); +} + /* this function is called at probe time */ static int sd_config(struct gspca_dev *gspca_dev, const struct usb_device_id *id) { struct sd *sd = (struct sd *) gspca_dev; - struct cam *cam; + struct cam *cam = &gspca_dev->cam; int ret = 0; sd->bridge = id->driver_info & BRIDGE_MASK; @@ -1989,6 +2991,16 @@ static int sd_config(struct gspca_dev *gspca_dev, case BRIDGE_OV519: ret = ov519_configure(sd); break; + case BRIDGE_OVFX2: + ret = ovfx2_configure(sd); + cam->bulk_size = OVFX2_BULK_SIZE; + cam->bulk_nurbs = MAX_NURBS; + cam->bulk = 1; + break; + case BRIDGE_W9968CF: + ret = w9968cf_configure(sd); + cam->reverse_alts = 1; + break; } if (ret) @@ -1996,49 +3008,39 @@ static int sd_config(struct gspca_dev *gspca_dev, ov51x_led_control(sd, 0); /* turn LED off */ - /* Test for 76xx */ - if (ov51x_set_slave_ids(sd, OV7xx0_SID) < 0) - goto error; - /* The OV519 must be more aggressive about sensor detection since * I2C write will never fail if the sensor is not present. We have * to try to initialize the sensor to detect its presence */ - if (init_ov_sensor(sd) >= 0) { + + /* Test for 76xx */ + if (init_ov_sensor(sd, OV7xx0_SID) >= 0) { if (ov7xx0_configure(sd) < 0) { PDEBUG(D_ERR, "Failed to configure OV7xx0"); goto error; } - } else { - - /* Test for 6xx0 */ - if (ov51x_set_slave_ids(sd, OV6xx0_SID) < 0) + /* Test for 6xx0 */ + } else if (init_ov_sensor(sd, OV6xx0_SID) >= 0) { + if (ov6xx0_configure(sd) < 0) { + PDEBUG(D_ERR, "Failed to configure OV6xx0"); + goto error; + } + /* Test for 8xx0 */ + } else if (init_ov_sensor(sd, OV8xx0_SID) >= 0) { + if (ov8xx0_configure(sd) < 0) { + PDEBUG(D_ERR, "Failed to configure OV8xx0"); goto error; - - if (init_ov_sensor(sd) >= 0) { - if (ov6xx0_configure(sd) < 0) { - PDEBUG(D_ERR, "Failed to configure OV6xx0"); - goto error; - } - } else { - - /* Test for 8xx0 */ - if (ov51x_set_slave_ids(sd, OV8xx0_SID) < 0) - goto error; - - if (init_ov_sensor(sd) < 0) { - PDEBUG(D_ERR, - "Can't determine sensor slave IDs"); - goto error; - } - if (ov8xx0_configure(sd) < 0) { - PDEBUG(D_ERR, - "Failed to configure OV8xx0 sensor"); - goto error; - } } + /* Test for 3xxx / 2xxx */ + } else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) { + if (ov_hires_configure(sd) < 0) { + PDEBUG(D_ERR, "Failed to configure high res OV"); + goto error; + } + } else { + PDEBUG(D_ERR, "Can't determine sensor slave IDs"); + goto error; } - cam = &gspca_dev->cam; switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: @@ -2069,6 +3071,31 @@ static int sd_config(struct gspca_dev *gspca_dev, cam->nmodes = ARRAY_SIZE(ov519_sif_mode); } break; + case BRIDGE_OVFX2: + if (sd->sensor == SEN_OV2610) { + cam->cam_mode = ovfx2_ov2610_mode; + cam->nmodes = ARRAY_SIZE(ovfx2_ov2610_mode); + } else if (sd->sensor == SEN_OV3610) { + cam->cam_mode = ovfx2_ov3610_mode; + cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode); + } else if (!sd->sif) { + cam->cam_mode = ov519_vga_mode; + cam->nmodes = ARRAY_SIZE(ov519_vga_mode); + } else { + cam->cam_mode = ov519_sif_mode; + cam->nmodes = ARRAY_SIZE(ov519_sif_mode); + } + break; + case BRIDGE_W9968CF: + cam->cam_mode = w9968cf_vga_mode; + cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode); + if (sd->sif) + cam->nmodes--; + + /* w9968cf needs initialisation once the sensor is known */ + if (w9968cf_init(sd) < 0) + goto error; + break; } sd->brightness = BRIGHTNESS_DEF; if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF) @@ -2087,11 +3114,15 @@ static int sd_config(struct gspca_dev *gspca_dev, gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << OV7670_FREQ_IDX); } + sd->quality = QUALITY_DEF; if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX; /* OV8610 Frequency filter control should work but needs testing */ if (sd->sensor == SEN_OV8610) gspca_dev->ctrl_dis |= 1 << FREQ_IDX; + /* No controls for the OV2610/OV3610 */ + if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610) + gspca_dev->ctrl_dis |= 0xFF; return 0; error: @@ -2106,6 +3137,20 @@ static int sd_init(struct gspca_dev *gspca_dev) /* initialize the sensor */ switch (sd->sensor) { + case SEN_OV2610: + if (write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610))) + return -EIO; + /* Enable autogain, autoexpo, awb, bandfilter */ + if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0) + return -EIO; + break; + case SEN_OV3610: + if (write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b))) + return -EIO; + /* Enable autogain, autoexpo, awb, bandfilter */ + if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0) + return -EIO; + break; case SEN_OV6620: if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20))) return -EIO; @@ -2548,19 +3593,60 @@ static int ov519_mode_init_regs(struct sd *sd) static int mode_init_ov_sensor_regs(struct sd *sd) { struct gspca_dev *gspca_dev; - int qvga; + int qvga, xstart, xend, ystart, yend; + __u8 v; gspca_dev = &sd->gspca_dev; qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; /******** Mode (VGA/QVGA) and sensor specific regs ********/ switch (sd->sensor) { + case SEN_OV2610: + i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); + i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); + i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); + i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); + i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); + i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); + i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); + return 0; + case SEN_OV3610: + if (qvga) { + xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4); + ystart = (776 - gspca_dev->height) / 2; + } else { + xstart = (2076 - gspca_dev->width) / 2 + (0x10 << 4); + ystart = (1544 - gspca_dev->height) / 2; + } + xend = xstart + gspca_dev->width; + yend = ystart + gspca_dev->height; + /* Writing to the COMH register resets the other windowing regs + to their default values, so we must do this first. */ + i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0xf0); + i2c_w_mask(sd, 0x32, + (((xend >> 1) & 7) << 3) | ((xstart >> 1) & 7), + 0x3f); + i2c_w_mask(sd, 0x03, + (((yend >> 1) & 3) << 2) | ((ystart >> 1) & 3), + 0x0f); + i2c_w(sd, 0x17, xstart >> 4); + i2c_w(sd, 0x18, xend >> 4); + i2c_w(sd, 0x19, ystart >> 3); + i2c_w(sd, 0x1a, yend >> 3); + return 0; case SEN_OV8610: /* For OV8610 qvga means qsvga */ i2c_w_mask(sd, OV7610_REG_COM_C, qvga ? (1 << 5) : 0, 1 << 5); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ + i2c_w_mask(sd, 0x2d, 0x00, 0x40); /* from windrv 090403 */ + i2c_w_mask(sd, 0x28, 0x20, 0x20); /* progressive mode on */ break; case SEN_OV7610: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); + i2c_w(sd, 0x35, qvga?0x1e:0x9e); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ break; case SEN_OV7620: case SEN_OV76BE: @@ -2571,6 +3657,10 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ + if (sd->sensor == SEN_OV76BE) + i2c_w(sd, 0x35, qvga ? 0x1e : 0x9e); break; case SEN_OV7640: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); @@ -2580,6 +3670,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd) /* i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); */ /* i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); */ /* i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); */ + i2c_w_mask(sd, 0x12, 0x04, 0x04); /* AWB: 1 */ break; case SEN_OV7670: /* set COM7_FMT_VGA or COM7_FMT_QVGA @@ -2588,55 +3679,56 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, OV7670_REG_COM7, qvga ? OV7670_COM7_FMT_QVGA : OV7670_COM7_FMT_VGA, OV7670_COM7_FMT_MASK); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB, + OV7670_COM8_AWB); + if (qvga) { /* QVGA from ov7670.c by + * Jonathan Corbet */ + xstart = 164; + xend = 28; + ystart = 14; + yend = 494; + } else { /* VGA */ + xstart = 158; + xend = 14; + ystart = 10; + yend = 490; + } + /* OV7670 hardware window registers are split across + * multiple locations */ + i2c_w(sd, OV7670_REG_HSTART, xstart >> 3); + i2c_w(sd, OV7670_REG_HSTOP, xend >> 3); + v = i2c_r(sd, OV7670_REG_HREF); + v = (v & 0xc0) | ((xend & 0x7) << 3) | (xstart & 0x07); + msleep(10); /* need to sleep between read and write to + * same reg! */ + i2c_w(sd, OV7670_REG_HREF, v); + + i2c_w(sd, OV7670_REG_VSTART, ystart >> 2); + i2c_w(sd, OV7670_REG_VSTOP, yend >> 2); + v = i2c_r(sd, OV7670_REG_VREF); + v = (v & 0xc0) | ((yend & 0x3) << 2) | (ystart & 0x03); + msleep(10); /* need to sleep between read and write to + * same reg! */ + i2c_w(sd, OV7670_REG_VREF, v); break; case SEN_OV6620: + i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); + i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */ + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ + break; case SEN_OV6630: case SEN_OV66308AF: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); + i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */ break; default: return -EINVAL; } - /******** Palette-specific regs ********/ - - /* The OV518 needs special treatment. Although both the OV518 - * and the OV6630 support a 16-bit video bus, only the 8 bit Y - * bus is actually used. The UV bus is tied to ground. - * Therefore, the OV6630 needs to be in 8-bit multiplexed - * output mode */ - - /* OV7640 is 8-bit only */ - - if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF && - sd->sensor != SEN_OV7640) - i2c_w_mask(sd, 0x13, 0x00, 0x20); - /******** Clock programming ********/ i2c_w(sd, 0x11, sd->clockdiv); - /******** Special Features ********/ -/* no evidence this is possible with OV7670, either */ - /* Test Pattern */ - if (sd->sensor != SEN_OV7640 && sd->sensor != SEN_OV7670) - i2c_w_mask(sd, 0x12, 0x00, 0x02); - - /* Enable auto white balance */ - if (sd->sensor == SEN_OV7670) - i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB, - OV7670_COM8_AWB); - else - i2c_w_mask(sd, 0x12, 0x04, 0x04); - - /* This will go away as soon as ov51x_mode_init_sensor_regs() */ - /* is fully tested. */ - /* 7620/6620/6630? don't have register 0x35, so play it safe */ - if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - if (!qvga) - i2c_w(sd, 0x35, 0x9e); - else - i2c_w(sd, 0x35, 0x1e); - } return 0; } @@ -2659,8 +3751,12 @@ static int set_ov_sensor_window(struct sd *sd) struct gspca_dev *gspca_dev; int qvga, crop; int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale; - int ret, hstart, hstop, vstop, vstart; - __u8 v; + int ret; + + /* mode setup is fully handled in mode_init_ov_sensor_regs for these */ + if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610 || + sd->sensor == SEN_OV7670) + return mode_init_ov_sensor_regs(sd); gspca_dev = &sd->gspca_dev; qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1; @@ -2708,11 +3804,6 @@ static int set_ov_sensor_window(struct sd *sd) hwebase = 0x1a; vwsbase = vwebase = 0x03; break; - case SEN_OV7670: - /*handling of OV7670 hardware sensor start and stop values - * is very odd, compared to the other OV sensors */ - vwsbase = vwebase = hwebase = hwsbase = 0x00; - break; default: return -EINVAL; } @@ -2753,58 +3844,11 @@ static int set_ov_sensor_window(struct sd *sd) if (ret < 0) return ret; - if (sd->sensor == SEN_OV8610) { - i2c_w_mask(sd, 0x2d, 0x05, 0x40); - /* old 0x95, new 0x05 from windrv 090403 */ - /* bits 5-7: reserved */ - i2c_w_mask(sd, 0x28, 0x20, 0x20); - /* bit 5: progressive mode on */ - } - - /* The below is wrong for OV7670s because their window registers - * only store the high bits in 0x17 to 0x1a */ - - /* SRH Use sd->max values instead of requested win values */ - /* SCS Since we're sticking with only the max hardware widths - * for a given mode */ - /* I can hard code this for OV7670s */ - /* Yes, these numbers do look odd, but they're tested and work! */ - if (sd->sensor == SEN_OV7670) { - if (qvga) { /* QVGA from ov7670.c by - * Jonathan Corbet */ - hstart = 164; - hstop = 28; - vstart = 14; - vstop = 494; - } else { /* VGA */ - hstart = 158; - hstop = 14; - vstart = 10; - vstop = 490; - } - /* OV7670 hardware window registers are split across - * multiple locations */ - i2c_w(sd, OV7670_REG_HSTART, hstart >> 3); - i2c_w(sd, OV7670_REG_HSTOP, hstop >> 3); - v = i2c_r(sd, OV7670_REG_HREF); - v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x07); - msleep(10); /* need to sleep between read and write to - * same reg! */ - i2c_w(sd, OV7670_REG_HREF, v); + i2c_w(sd, 0x17, hwsbase); + i2c_w(sd, 0x18, hwebase + (sd->sensor_width >> hwscale)); + i2c_w(sd, 0x19, vwsbase); + i2c_w(sd, 0x1a, vwebase + (sd->sensor_height >> vwscale)); - i2c_w(sd, OV7670_REG_VSTART, vstart >> 2); - i2c_w(sd, OV7670_REG_VSTOP, vstop >> 2); - v = i2c_r(sd, OV7670_REG_VREF); - v = (v & 0xc0) | ((vstop & 0x3) << 2) | (vstart & 0x03); - msleep(10); /* need to sleep between read and write to - * same reg! */ - i2c_w(sd, OV7670_REG_VREF, v); - } else { - i2c_w(sd, 0x17, hwsbase); - i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); - i2c_w(sd, 0x19, vwsbase); - i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale)); - } return 0; } @@ -2814,6 +3858,10 @@ static int sd_start(struct gspca_dev *gspca_dev) struct sd *sd = (struct sd *) gspca_dev; int ret = 0; + /* Default for most bridges, allow bridge_mode_init_regs to override */ + sd->sensor_width = sd->gspca_dev.width; + sd->sensor_height = sd->gspca_dev.height; + switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: @@ -2826,6 +3874,10 @@ static int sd_start(struct gspca_dev *gspca_dev) case BRIDGE_OV519: ret = ov519_mode_init_regs(sd); break; + /* case BRIDGE_OVFX2: nothing to do */ + case BRIDGE_W9968CF: + ret = w9968cf_mode_init_regs(sd); + break; } if (ret < 0) goto out; @@ -2859,10 +3911,17 @@ static void sd_stopN(struct gspca_dev *gspca_dev) ov51x_led_control(sd, 0); } +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->bridge == BRIDGE_W9968CF) + w9968cf_stop0(sd); +} + static void ov511_pkt_scan(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, /* target */ - __u8 *in, /* isoc packet */ - int len) /* iso packet length */ + u8 *in, /* isoc packet */ + int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; @@ -2893,11 +3952,11 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev, return; } /* Add 11 byte footer to frame, might be usefull */ - gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11); + gspca_frame_add(gspca_dev, LAST_PACKET, in, 11); return; } else { /* Frame start */ - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0); + gspca_frame_add(gspca_dev, FIRST_PACKET, in, 0); sd->packet_nr = 0; } } @@ -2906,12 +3965,11 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev, len--; /* intermediate packet */ - gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len); + gspca_frame_add(gspca_dev, INTER_PACKET, in, len); } static void ov518_pkt_scan(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, /* target */ - __u8 *data, /* isoc packet */ + u8 *data, /* isoc packet */ int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; @@ -2919,8 +3977,8 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev, /* A false positive here is likely, until OVT gives me * the definitive SOF/EOF format */ if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { - frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); + gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); sd->packet_nr = 0; } @@ -2944,12 +4002,11 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev, } /* intermediate packet */ - gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } static void ov519_pkt_scan(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, /* target */ - __u8 *data, /* isoc packet */ + u8 *data, /* isoc packet */ int len) /* iso packet length */ { /* Header of ov519 is 16 bytes: @@ -2972,7 +4029,7 @@ static void ov519_pkt_scan(struct gspca_dev *gspca_dev, len -= HDRSZ; #undef HDRSZ if (data[0] == 0xff || data[1] == 0xd8) - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + gspca_frame_add(gspca_dev, FIRST_PACKET, data, len); else gspca_dev->last_packet_type = DISCARD_PACKET; @@ -2980,20 +4037,31 @@ static void ov519_pkt_scan(struct gspca_dev *gspca_dev, case 0x51: /* end of frame */ if (data[9] != 0) gspca_dev->last_packet_type = DISCARD_PACKET; - gspca_frame_add(gspca_dev, LAST_PACKET, frame, - data, 0); + gspca_frame_add(gspca_dev, LAST_PACKET, + NULL, 0); return; } } /* intermediate packet */ - gspca_frame_add(gspca_dev, INTER_PACKET, frame, - data, len); + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); +} + +static void ovfx2_pkt_scan(struct gspca_dev *gspca_dev, + u8 *data, /* isoc packet */ + int len) /* iso packet length */ +{ + /* A short read signals EOF */ + if (len < OVFX2_BULK_SIZE) { + gspca_frame_add(gspca_dev, LAST_PACKET, data, len); + gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); + return; + } + gspca_frame_add(gspca_dev, INTER_PACKET, data, len); } static void sd_pkt_scan(struct gspca_dev *gspca_dev, - struct gspca_frame *frame, /* target */ - __u8 *data, /* isoc packet */ + u8 *data, /* isoc packet */ int len) /* iso packet length */ { struct sd *sd = (struct sd *) gspca_dev; @@ -3001,14 +4069,20 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, switch (sd->bridge) { case BRIDGE_OV511: case BRIDGE_OV511PLUS: - ov511_pkt_scan(gspca_dev, frame, data, len); + ov511_pkt_scan(gspca_dev, data, len); break; case BRIDGE_OV518: case BRIDGE_OV518PLUS: - ov518_pkt_scan(gspca_dev, frame, data, len); + ov518_pkt_scan(gspca_dev, data, len); break; case BRIDGE_OV519: - ov519_pkt_scan(gspca_dev, frame, data, len); + ov519_pkt_scan(gspca_dev, data, len); + break; + case BRIDGE_OVFX2: + ovfx2_pkt_scan(gspca_dev, data, len); + break; + case BRIDGE_W9968CF: + w9968cf_pkt_scan(gspca_dev, data, len); break; } } @@ -3124,7 +4198,8 @@ static void setcolors(struct gspca_dev *gspca_dev) static void setautobrightness(struct sd *sd) { - if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670) + if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670 || + sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610) return; i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10); @@ -3132,6 +4207,9 @@ static void setautobrightness(struct sd *sd) static void setfreq(struct sd *sd) { + if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610) + return; + if (sd->sensor == SEN_OV7670) { switch (sd->freq) { case 0: /* Banding filter disabled */ @@ -3301,8 +4379,12 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->freq = val; - if (gspca_dev->streaming) + if (gspca_dev->streaming) { setfreq(sd); + /* Ugly but necessary */ + if (sd->bridge == BRIDGE_W9968CF) + w9968cf_set_crop_window(sd); + } return 0; } @@ -3343,6 +4425,45 @@ static int sd_querymenu(struct gspca_dev *gspca_dev, return -EINVAL; } +static int sd_get_jcomp(struct gspca_dev *gspca_dev, + struct v4l2_jpegcompression *jcomp) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->bridge != BRIDGE_W9968CF) + return -EINVAL; + + memset(jcomp, 0, sizeof *jcomp); + jcomp->quality = sd->quality; + jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT | + V4L2_JPEG_MARKER_DRI; + return 0; +} + +static int sd_set_jcomp(struct gspca_dev *gspca_dev, + struct v4l2_jpegcompression *jcomp) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->bridge != BRIDGE_W9968CF) + return -EINVAL; + + if (gspca_dev->streaming) + return -EBUSY; + + if (jcomp->quality < QUALITY_MIN) + sd->quality = QUALITY_MIN; + else if (jcomp->quality > QUALITY_MAX) + sd->quality = QUALITY_MAX; + else + sd->quality = jcomp->quality; + + /* Return resulting jcomp params to app */ + sd_get_jcomp(gspca_dev, jcomp); + + return 0; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -3352,18 +4473,23 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, + .stop0 = sd_stop0, .pkt_scan = sd_pkt_scan, .querymenu = sd_querymenu, + .get_jcomp = sd_get_jcomp, + .set_jcomp = sd_set_jcomp, }; /* -- module initialisation -- */ static const __devinitdata struct usb_device_id device_table[] = { + {USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF }, {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4064), .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, + {USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x4068), .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED }, {USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 }, @@ -3373,11 +4499,16 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 }, {USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 }, + {USB_DEVICE(0x05a9, 0x2800), .driver_info = BRIDGE_OVFX2 }, {USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS }, {USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS }, {USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS }, + {USB_DEVICE(0x0b62, 0x0059), .driver_info = BRIDGE_OVFX2 }, + {USB_DEVICE(0x0e96, 0xc001), .driver_info = BRIDGE_OVFX2 }, + {USB_DEVICE(0x1046, 0x9967), .driver_info = BRIDGE_W9968CF }, + {USB_DEVICE(0x8020, 0xEF04), .driver_info = BRIDGE_OVFX2 }, {} }; |