1 files changed, 60 insertions, 126 deletions

diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 3681a6ff0815..a4f99797eb56 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -24,10 +24,13 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
 #include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-common.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
 
 #include "ov9640.h"
 
@@ -162,27 +165,6 @@ static enum v4l2_mbus_pixelcode ov9640_codes[] = {
 	V4L2_MBUS_FMT_RGB565_2X8_LE,
 };
 
-static const struct v4l2_queryctrl ov9640_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-	{
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	},
-};
-
 /* read a register */
 static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
 {
@@ -284,75 +266,25 @@ static int ov9640_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 }
 
-/* Alter bus settings on camera side */
-static int ov9640_set_bus_param(struct soc_camera_device *icd,
-				unsigned long flags)
-{
-	return 0;
-}
-
-/* Request bus settings on camera side */
-static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	/*
-	 * REVISIT: the camera probably can do 10 bit transfers, but I don't
-	 *          have those pins connected on my hardware.
-	 */
-	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
-		SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
-/* Get status of additional camera capabilities */
-static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct ov9640_priv *priv = to_ov9640_sensor(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		ctrl->value = priv->flag_vflip;
-		break;
-	case V4L2_CID_HFLIP:
-		ctrl->value = priv->flag_hflip;
-		break;
-	}
-	return 0;
-}
-
 /* Set status of additional camera capabilities */
-static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int ov9640_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = to_ov9640_sensor(sd);
-
-	int ret = 0;
+	struct ov9640_priv *priv = container_of(ctrl->handler, struct ov9640_priv, hdl);
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		priv->flag_vflip = ctrl->value;
-		if (ctrl->value)
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
+		if (ctrl->val)
+			return ov9640_reg_rmw(client, OV9640_MVFP,
 							OV9640_MVFP_V, 0);
-		else
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
-							0, OV9640_MVFP_V);
-		break;
+		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_V);
 	case V4L2_CID_HFLIP:
-		priv->flag_hflip = ctrl->value;
-		if (ctrl->value)
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
+		if (ctrl->val)
+			return ov9640_reg_rmw(client, OV9640_MVFP,
 							OV9640_MVFP_H, 0);
-		else
-			ret = ov9640_reg_rmw(client, OV9640_MVFP,
-							0, OV9640_MVFP_H);
-		break;
+		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_H);
 	}
-
-	return ret;
+	return -EINVAL;
 }
 
 /* Get chip identification */
@@ -646,10 +578,7 @@ static int ov9640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 	return 0;
 }
 
-
-
-static int ov9640_video_probe(struct soc_camera_device *icd,
-				struct i2c_client *client)
+static int ov9640_video_probe(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov9640_priv *priv = to_ov9640_sensor(sd);
@@ -657,29 +586,19 @@ static int ov9640_video_probe(struct soc_camera_device *icd,
 	const char	*devname;
 	int		ret = 0;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/*
 	 * check and show product ID and manufacturer ID
 	 */
 
 	ret = ov9640_reg_read(client, OV9640_PID, &pid);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_VER, &ver);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
 	if (ret)
-		goto err;
-
-	ret = ov9640_reg_read(client, OV9640_VER, &ver);
-	if (ret)
-		goto err;
-
-	ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
-	if (ret)
-		goto err;
-
-	ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
-	if (ret)
-		goto err;
+		return ret;
 
 	switch (VERSION(pid, ver)) {
 	case OV9640_V2:
@@ -693,27 +612,20 @@ static int ov9640_video_probe(struct soc_camera_device *icd,
 		break;
 	default:
 		dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
-		ret = -ENODEV;
-		goto err;
+		return -ENODEV;
 	}
 
 	dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
 		 devname, pid, ver, midh, midl);
 
-err:
-	return ret;
+	return v4l2_ctrl_handler_setup(&priv->hdl);
 }
 
-static struct soc_camera_ops ov9640_ops = {
-	.set_bus_param		= ov9640_set_bus_param,
-	.query_bus_param	= ov9640_query_bus_param,
-	.controls		= ov9640_controls,
-	.num_controls		= ARRAY_SIZE(ov9640_controls),
+static const struct v4l2_ctrl_ops ov9640_ctrl_ops = {
+	.s_ctrl = ov9640_s_ctrl,
 };
 
 static struct v4l2_subdev_core_ops ov9640_core_ops = {
-	.g_ctrl			= ov9640_g_ctrl,
-	.s_ctrl			= ov9640_s_ctrl,
 	.g_chip_ident		= ov9640_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register		= ov9640_get_register,
@@ -722,6 +634,22 @@ static struct v4l2_subdev_core_ops ov9640_core_ops = {
 
 };
 
+/* Request bus settings on camera side */
+static int ov9640_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops ov9640_video_ops = {
 	.s_stream	= ov9640_s_stream,
 	.s_mbus_fmt	= ov9640_s_fmt,
@@ -729,7 +657,7 @@ static struct v4l2_subdev_video_ops ov9640_video_ops = {
 	.enum_mbus_fmt	= ov9640_enum_fmt,
 	.cropcap	= ov9640_cropcap,
 	.g_crop		= ov9640_g_crop,
-
+	.g_mbus_config	= ov9640_g_mbus_config,
 };
 
 static struct v4l2_subdev_ops ov9640_subdev_ops = {
@@ -744,16 +672,9 @@ static int ov9640_probe(struct i2c_client *client,
 			const struct i2c_device_id *did)
 {
 	struct ov9640_priv *priv;
-	struct soc_camera_device *icd	= client->dev.platform_data;
-	struct soc_camera_link *icl;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "Missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "Missing platform_data for driver\n");
 		return -EINVAL;
@@ -768,12 +689,23 @@ static int ov9640_probe(struct i2c_client *client,
 
 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
 
-	icd->ops	= &ov9640_ops;
+	v4l2_ctrl_handler_init(&priv->hdl, 2);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error) {
+		int err = priv->hdl.error;
+
+		kfree(priv);
+		return err;
+	}
 
-	ret = ov9640_video_probe(icd, client);
+	ret = ov9640_video_probe(client);
 
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&priv->hdl);
 		kfree(priv);
 	}
 
@@ -785,6 +717,8 @@ static int ov9640_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
+	v4l2_device_unregister_subdev(&priv->subdev);
+	v4l2_ctrl_handler_free(&priv->hdl);
 	kfree(priv);
 	return 0;
 }