diff options
Diffstat (limited to 'drivers/media/video/ovcamchip/ov7x20.c')
| -rw-r--r-- | drivers/media/video/ovcamchip/ov7x20.c | 455 |
1 files changed, 455 insertions, 0 deletions
diff --git a/drivers/media/video/ovcamchip/ov7x20.c b/drivers/media/video/ovcamchip/ov7x20.c new file mode 100644 index 000000000000..3c8c48f338ba --- /dev/null +++ b/drivers/media/video/ovcamchip/ov7x20.c @@ -0,0 +1,455 @@ +/* OmniVision OV7620/OV7120 Camera Chip Support Code + * + * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org> + * http://alpha.dyndns.org/ov511/ + * + * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied. + */ + +#define DEBUG + +#include <linux/slab.h> +#include "ovcamchip_priv.h" + +/* Registers */ +#define REG_GAIN 0x00 /* gain [5:0] */ +#define REG_BLUE 0x01 /* blue gain */ +#define REG_RED 0x02 /* red gain */ +#define REG_SAT 0x03 /* saturation */ +#define REG_BRT 0x06 /* Y brightness */ +#define REG_SHARP 0x07 /* analog sharpness */ +#define REG_BLUE_BIAS 0x0C /* WB blue ratio [5:0] */ +#define REG_RED_BIAS 0x0D /* WB red ratio [5:0] */ +#define REG_EXP 0x10 /* exposure */ + +/* Default control settings. Values are in terms of V4L2 controls. */ +#define OV7120_DFL_BRIGHT 0x60 +#define OV7620_DFL_BRIGHT 0x60 +#define OV7120_DFL_SAT 0xb0 +#define OV7620_DFL_SAT 0xc0 +#define DFL_AUTO_EXP 1 +#define DFL_AUTO_GAIN 1 +#define OV7120_DFL_GAIN 0x00 +#define OV7620_DFL_GAIN 0x00 +/* NOTE: Since autoexposure is the default, these aren't programmed into the + * OV7x20 chip. They are just here because V4L2 expects a default */ +#define OV7120_DFL_EXP 0x7f +#define OV7620_DFL_EXP 0x7f + +/* Window parameters */ +#define HWSBASE 0x2F /* From 7620.SET (spec is wrong) */ +#define HWEBASE 0x2F +#define VWSBASE 0x05 +#define VWEBASE 0x05 + +struct ov7x20 { + int auto_brt; + int auto_exp; + int auto_gain; + int backlight; + int bandfilt; + int mirror; +}; + +/* Contrast look-up table */ +static unsigned char ctab[] = { + 0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57, + 0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff +}; + +/* Settings for (Black & White) OV7120 camera chip */ +static struct ovcamchip_regvals regvals_init_7120[] = { + { 0x12, 0x80 }, /* reset */ + { 0x13, 0x00 }, /* Autoadjust off */ + { 0x12, 0x20 }, /* Disable AWB */ + { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, /* Autoadjust on (if desired) */ + { 0x00, OV7120_DFL_GAIN }, + { 0x01, 0x80 }, + { 0x02, 0x80 }, + { 0x03, OV7120_DFL_SAT }, + { 0x06, OV7120_DFL_BRIGHT }, + { 0x07, 0x00 }, + { 0x0c, 0x20 }, + { 0x0d, 0x20 }, + { 0x11, 0x01 }, + { 0x14, 0x84 }, + { 0x15, 0x01 }, + { 0x16, 0x03 }, + { 0x17, 0x2f }, + { 0x18, 0xcf }, + { 0x19, 0x06 }, + { 0x1a, 0xf5 }, + { 0x1b, 0x00 }, + { 0x20, 0x08 }, + { 0x21, 0x80 }, + { 0x22, 0x80 }, + { 0x23, 0x00 }, + { 0x26, 0xa0 }, + { 0x27, 0xfa }, + { 0x28, 0x20 }, /* DON'T set bit 6. It is for the OV7620 only */ + { 0x29, DFL_AUTO_EXP?0x00:0x80 }, + { 0x2a, 0x10 }, + { 0x2b, 0x00 }, + { 0x2c, 0x88 }, + { 0x2d, 0x95 }, + { 0x2e, 0x80 }, + { 0x2f, 0x44 }, + { 0x60, 0x20 }, + { 0x61, 0x02 }, + { 0x62, 0x5f }, + { 0x63, 0xd5 }, + { 0x64, 0x57 }, + { 0x65, 0x83 }, /* OV says "don't change this value" */ + { 0x66, 0x55 }, + { 0x67, 0x92 }, + { 0x68, 0xcf }, + { 0x69, 0x76 }, + { 0x6a, 0x22 }, + { 0x6b, 0xe2 }, + { 0x6c, 0x40 }, + { 0x6d, 0x48 }, + { 0x6e, 0x80 }, + { 0x6f, 0x0d }, + { 0x70, 0x89 }, + { 0x71, 0x00 }, + { 0x72, 0x14 }, + { 0x73, 0x54 }, + { 0x74, 0xa0 }, + { 0x75, 0x8e }, + { 0x76, 0x00 }, + { 0x77, 0xff }, + { 0x78, 0x80 }, + { 0x79, 0x80 }, + { 0x7a, 0x80 }, + { 0x7b, 0xe6 }, + { 0x7c, 0x00 }, + { 0x24, 0x3a }, + { 0x25, 0x60 }, + { 0xff, 0xff }, /* END MARKER */ +}; + +/* Settings for (color) OV7620 camera chip */ +static struct ovcamchip_regvals regvals_init_7620[] = { + { 0x12, 0x80 }, /* reset */ + { 0x00, OV7620_DFL_GAIN }, + { 0x01, 0x80 }, + { 0x02, 0x80 }, + { 0x03, OV7620_DFL_SAT }, + { 0x06, OV7620_DFL_BRIGHT }, + { 0x07, 0x00 }, + { 0x0c, 0x24 }, + { 0x0c, 0x24 }, + { 0x0d, 0x24 }, + { 0x11, 0x01 }, + { 0x12, 0x24 }, + { 0x13, DFL_AUTO_GAIN?0x01:0x00 }, + { 0x14, 0x84 }, + { 0x15, 0x01 }, + { 0x16, 0x03 }, + { 0x17, 0x2f }, + { 0x18, 0xcf }, + { 0x19, 0x06 }, + { 0x1a, 0xf5 }, + { 0x1b, 0x00 }, + { 0x20, 0x18 }, + { 0x21, 0x80 }, + { 0x22, 0x80 }, + { 0x23, 0x00 }, + { 0x26, 0xa2 }, + { 0x27, 0xea }, + { 0x28, 0x20 }, + { 0x29, DFL_AUTO_EXP?0x00:0x80 }, + { 0x2a, 0x10 }, + { 0x2b, 0x00 }, + { 0x2c, 0x88 }, + { 0x2d, 0x91 }, + { 0x2e, 0x80 }, + { 0x2f, 0x44 }, + { 0x60, 0x27 }, + { 0x61, 0x02 }, + { 0x62, 0x5f }, + { 0x63, 0xd5 }, + { 0x64, 0x57 }, + { 0x65, 0x83 }, + { 0x66, 0x55 }, + { 0x67, 0x92 }, + { 0x68, 0xcf }, + { 0x69, 0x76 }, + { 0x6a, 0x22 }, + { 0x6b, 0x00 }, + { 0x6c, 0x02 }, + { 0x6d, 0x44 }, + { 0x6e, 0x80 }, + { 0x6f, 0x1d }, + { 0x70, 0x8b }, + { 0x71, 0x00 }, + { 0x72, 0x14 }, + { 0x73, 0x54 }, + { 0x74, 0x00 }, + { 0x75, 0x8e }, + { 0x76, 0x00 }, + { 0x77, 0xff }, + { 0x78, 0x80 }, + { 0x79, 0x80 }, + { 0x7a, 0x80 }, + { 0x7b, 0xe2 }, + { 0x7c, 0x00 }, + { 0xff, 0xff }, /* END MARKER */ +}; + +/* Returns index into the specified look-up table, with 'n' elements, for which + * the value is greater than or equal to "val". If a match isn't found, (n-1) + * is returned. The entries in the table must be in ascending order. */ +static inline int ov7x20_lut_find(unsigned char lut[], int n, unsigned char val) +{ + int i = 0; + + while (lut[i] < val && i < n) + i++; + + return i; +} + +/* This initializes the OV7x20 camera chip and relevant variables. */ +static int ov7x20_init(struct i2c_client *c) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + struct ov7x20 *s; + int rc; + + DDEBUG(4, &c->dev, "entered"); + + if (ov->mono) + rc = ov_write_regvals(c, regvals_init_7120); + else + rc = ov_write_regvals(c, regvals_init_7620); + + if (rc < 0) + return rc; + + ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL); + if (!s) + return -ENOMEM; + memset(s, 0, sizeof *s); + + s->auto_brt = 1; + s->auto_exp = DFL_AUTO_EXP; + s->auto_gain = DFL_AUTO_GAIN; + + return 0; +} + +static int ov7x20_free(struct i2c_client *c) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + + kfree(ov->spriv); + return 0; +} + +static int ov7x20_set_v4l1_control(struct i2c_client *c, + struct ovcamchip_control *ctl) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + struct ov7x20 *s = ov->spriv; + int rc; + int v = ctl->value; + + switch (ctl->id) { + case OVCAMCHIP_CID_CONT: + { + /* Use Y gamma control instead. Bit 0 enables it. */ + rc = ov_write(c, 0x64, ctab[v >> 12]); + break; + } + case OVCAMCHIP_CID_BRIGHT: + /* 7620 doesn't like manual changes when in auto mode */ + if (!s->auto_brt) + rc = ov_write(c, REG_BRT, v >> 8); + else + rc = 0; + break; + case OVCAMCHIP_CID_SAT: + rc = ov_write(c, REG_SAT, v >> 8); + break; + case OVCAMCHIP_CID_EXP: + if (!s->auto_exp) + rc = ov_write(c, REG_EXP, v); + else + rc = -EBUSY; + break; + case OVCAMCHIP_CID_FREQ: + { + int sixty = (v == 60); + + rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80); + if (rc < 0) + goto out; + + rc = ov_write(c, 0x2b, sixty?0x00:0xac); + if (rc < 0) + goto out; + + rc = ov_write_mask(c, 0x76, 0x01, 0x01); + break; + } + case OVCAMCHIP_CID_BANDFILT: + rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04); + s->bandfilt = v; + break; + case OVCAMCHIP_CID_AUTOBRIGHT: + rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10); + s->auto_brt = v; + break; + case OVCAMCHIP_CID_AUTOEXP: + rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01); + s->auto_exp = v; + break; + case OVCAMCHIP_CID_BACKLIGHT: + { + rc = ov_write_mask(c, 0x68, v?0xe0:0xc0, 0xe0); + if (rc < 0) + goto out; + + rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08); + if (rc < 0) + goto out; + + rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02); + s->backlight = v; + break; + } + case OVCAMCHIP_CID_MIRROR: + rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40); + s->mirror = v; + break; + default: + DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); + return -EPERM; + } + +out: + DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc); + return rc; +} + +static int ov7x20_get_v4l1_control(struct i2c_client *c, + struct ovcamchip_control *ctl) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + struct ov7x20 *s = ov->spriv; + int rc = 0; + unsigned char val = 0; + + switch (ctl->id) { + case OVCAMCHIP_CID_CONT: + rc = ov_read(c, 0x64, &val); + ctl->value = ov7x20_lut_find(ctab, 16, val) << 12; + break; + case OVCAMCHIP_CID_BRIGHT: + rc = ov_read(c, REG_BRT, &val); + ctl->value = val << 8; + break; + case OVCAMCHIP_CID_SAT: + rc = ov_read(c, REG_SAT, &val); + ctl->value = val << 8; + break; + case OVCAMCHIP_CID_EXP: + rc = ov_read(c, REG_EXP, &val); + ctl->value = val; + break; + case OVCAMCHIP_CID_BANDFILT: + ctl->value = s->bandfilt; + break; + case OVCAMCHIP_CID_AUTOBRIGHT: + ctl->value = s->auto_brt; + break; + case OVCAMCHIP_CID_AUTOEXP: + ctl->value = s->auto_exp; + break; + case OVCAMCHIP_CID_BACKLIGHT: + ctl->value = s->backlight; + break; + case OVCAMCHIP_CID_MIRROR: + ctl->value = s->mirror; + break; + default: + DDEBUG(2, &c->dev, "control not supported: %d", ctl->id); + return -EPERM; + } + + DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc); + return rc; +} + +static int ov7x20_mode_init(struct i2c_client *c, struct ovcamchip_window *win) +{ + struct ovcamchip *ov = i2c_get_clientdata(c); + int qvga = win->quarter; + + /******** QVGA-specific regs ********/ + ov_write_mask(c, 0x14, qvga?0x20:0x00, 0x20); + ov_write_mask(c, 0x28, qvga?0x00:0x20, 0x20); + ov_write(c, 0x24, qvga?0x20:0x3a); + ov_write(c, 0x25, qvga?0x30:0x60); + ov_write_mask(c, 0x2d, qvga?0x40:0x00, 0x40); + if (!ov->mono) + ov_write_mask(c, 0x67, qvga?0xf0:0x90, 0xf0); + ov_write_mask(c, 0x74, qvga?0x20:0x00, 0x20); + + /******** Clock programming ********/ + + ov_write(c, 0x11, win->clockdiv); + + return 0; +} + +static int ov7x20_set_window(struct i2c_client *c, struct ovcamchip_window *win) +{ + int ret, hwscale, vwscale; + + ret = ov7x20_mode_init(c, win); + if (ret < 0) + return ret; + + if (win->quarter) { + hwscale = 1; + vwscale = 0; + } else { + hwscale = 2; + vwscale = 1; + } + + ov_write(c, 0x17, HWSBASE + (win->x >> hwscale)); + ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale)); + ov_write(c, 0x19, VWSBASE + (win->y >> vwscale)); + ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale)); + + return 0; +} + +static int ov7x20_command(struct i2c_client *c, unsigned int cmd, void *arg) +{ + switch (cmd) { + case OVCAMCHIP_CMD_S_CTRL: + return ov7x20_set_v4l1_control(c, arg); + case OVCAMCHIP_CMD_G_CTRL: + return ov7x20_get_v4l1_control(c, arg); + case OVCAMCHIP_CMD_S_MODE: + return ov7x20_set_window(c, arg); + default: + DDEBUG(2, &c->dev, "command not supported: %d", cmd); + return -ENOIOCTLCMD; + } +} + +struct ovcamchip_ops ov7x20_ops = { + .init = ov7x20_init, + .free = ov7x20_free, + .command = ov7x20_command, +}; |