diff options
Diffstat (limited to 'drivers/media/video/saa7134/saa7134-dvb.c')
-rw-r--r-- | drivers/media/video/saa7134/saa7134-dvb.c | 194 |
1 files changed, 188 insertions, 6 deletions
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 1a536e865277..86cfdb8514cb 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -32,6 +32,7 @@ #include "saa7134-reg.h" #include "saa7134.h" #include <media/v4l2-common.h> +#include "dvb-pll.h" #ifdef HAVE_MT352 # include "mt352.h" @@ -42,7 +43,6 @@ #endif #ifdef HAVE_NXT200X # include "nxt200x.h" -# include "dvb-pll.h" #endif MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); @@ -110,6 +110,25 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe) mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); mt352_write(fe, irq_cfg, sizeof(irq_cfg)); + + return 0; +} + +static int mt352_aver777_init(struct dvb_frontend* fe) +{ + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; + + mt352_write(fe, clock_config, sizeof(clock_config)); + udelay(200); + mt352_write(fe, reset, sizeof(reset)); + mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); + mt352_write(fe, agc_cfg, sizeof(agc_cfg)); + mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); + return 0; } @@ -117,8 +136,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) { - static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; - static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE; + u8 off[] = { 0x00, 0xf1}; + u8 on[] = { 0x00, 0x71}; + struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; + struct saa7134_dev *dev = fe->dvb->priv; struct v4l2_frequency f; @@ -126,9 +147,10 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, f.tuner = 0; f.type = V4L2_TUNER_DIGITAL_TV; f.frequency = params->frequency / 1000 * 16 / 1000; - saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on); + i2c_transfer(&dev->i2c_adap, &msg, 1); saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f); - saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off); + msg.buf = on; + i2c_transfer(&dev->i2c_adap, &msg, 1); pinnacle_antenna_pwr(dev, antenna_pwr); @@ -142,6 +164,15 @@ static int mt352_pinnacle_pll_set(struct dvb_frontend* fe, return 0; } +static int mt352_aver777_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8* pllbuf) +{ + pllbuf[0] = 0xc2; + dvb_pll_configure(&dvb_pll_philips_td1316, pllbuf+1, + params->frequency, + params->u.ofdm.bandwidth); + return 0; +} + static struct mt352_config pinnacle_300i = { .demod_address = 0x3c >> 1, .adc_clock = 20333, @@ -150,6 +181,12 @@ static struct mt352_config pinnacle_300i = { .demod_init = mt352_pinnacle_init, .pll_set = mt352_pinnacle_pll_set, }; + +static struct mt352_config avermedia_777 = { + .demod_address = 0xf, + .demod_init = mt352_aver777_init, + .pll_set = mt352_aver777_pll_set, +}; #endif /* ------------------------------------------------------------------ */ @@ -777,7 +814,7 @@ static int philips_tiger_pll_set(struct dvb_frontend *fe, struct dvb_frontend_pa tda8290_msg.buf = tda8290_open; i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); return ret; -}; +} static int philips_tiger_dvb_mode(struct dvb_frontend *fe) { @@ -813,6 +850,110 @@ static struct tda1004x_config philips_tiger_config = { .request_firmware = NULL, }; +/* ------------------------------------------------------------------ */ + +static int lifeview_trio_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + + ret = philips_tda827xa_pll_set(0x60, fe, params); + return ret; +} + +static int lifeview_trio_dvb_mode(struct dvb_frontend *fe) +{ + return 0; +} + +static void lifeview_trio_analog_mode(struct dvb_frontend *fe) +{ + philips_tda827xa_pll_sleep(0x60, fe); +} + +static struct tda1004x_config lifeview_trio_config = { + .demod_address = 0x09, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GPL, + .if_freq = TDA10046_FREQ_045, + .pll_init = lifeview_trio_dvb_mode, + .pll_set = lifeview_trio_pll_set, + .pll_sleep = lifeview_trio_analog_mode, + .request_firmware = NULL, +}; + +/* ------------------------------------------------------------------ */ + +static int ads_duo_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + + ret = philips_tda827xa_pll_set(0x61, fe, params); + return ret; +} + +static int ads_duo_dvb_mode(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + /* route TDA8275a AGC input to the channel decoder */ + saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x60); + return 0; +} + +static void ads_duo_analog_mode(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + /* route TDA8275a AGC input to the analog IF chip*/ + saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x20); + philips_tda827xa_pll_sleep( 0x61, fe); +} + +static struct tda1004x_config ads_tech_duo_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X_GPL, + .if_freq = TDA10046_FREQ_045, + .pll_init = ads_duo_dvb_mode, + .pll_set = ads_duo_pll_set, + .pll_sleep = ads_duo_analog_mode, + .request_firmware = NULL, +}; + +/* ------------------------------------------------------------------ */ + +static int tevion_dvb220rf_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + ret = philips_tda827xa_pll_set(0x60, fe, params); + return ret; +} + +static int tevion_dvb220rf_pll_init(struct dvb_frontend *fe) +{ + return 0; +} + +static void tevion_dvb220rf_pll_sleep(struct dvb_frontend *fe) +{ + philips_tda827xa_pll_sleep( 0x61, fe); +} + +static struct tda1004x_config tevion_dvbt220rf_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .if_freq = TDA10046_FREQ_045, + .pll_init = tevion_dvb220rf_pll_init, + .pll_set = tevion_dvb220rf_pll_set, + .pll_sleep = tevion_dvb220rf_pll_sleep, + .request_firmware = NULL, +}; + #endif /* ------------------------------------------------------------------ */ @@ -823,6 +964,22 @@ static struct nxt200x_config avertvhda180 = { .pll_address = 0x61, .pll_desc = &dvb_pll_tdhu2, }; + +static int nxt200x_set_pll_input(u8 *buf, int input) +{ + if (input) + buf[3] |= 0x08; + else + buf[3] &= ~0x08; + return 0; +} + +static struct nxt200x_config kworldatsc110 = { + .demod_address = 0x0a, + .pll_address = 0x61, + .pll_desc = &dvb_pll_tuv1236d, + .set_pll_input = nxt200x_set_pll_input, +}; #endif /* ------------------------------------------------------------------ */ @@ -847,6 +1004,12 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend = mt352_attach(&pinnacle_300i, &dev->i2c_adap); break; + + case SAA7134_BOARD_AVERMEDIA_777: + printk("%s: avertv 777 dvb setup\n",dev->name); + dev->dvb.frontend = mt352_attach(&avermedia_777, + &dev->i2c_adap); + break; #endif #ifdef HAVE_TDA1004X case SAA7134_BOARD_MD7134: @@ -885,11 +1048,30 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend = tda10046_attach(&philips_tiger_config, &dev->i2c_adap); break; + case SAA7134_BOARD_FLYDVBT_LR301: + dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_FLYDVB_TRIO: + dev->dvb.frontend = tda10046_attach(&lifeview_trio_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: + dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config, + &dev->i2c_adap); + break; + case SAA7134_BOARD_TEVION_DVBT_220RF: + dev->dvb.frontend = tda10046_attach(&tevion_dvbt220rf_config, + &dev->i2c_adap); + break; #endif #ifdef HAVE_NXT200X case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: dev->dvb.frontend = nxt200x_attach(&avertvhda180, &dev->i2c_adap); break; + case SAA7134_BOARD_KWORLD_ATSC110: + dev->dvb.frontend = nxt200x_attach(&kworldatsc110, &dev->i2c_adap); + break; #endif default: printk("%s: Huh? unknown DVB card?\n",dev->name); |