diff options
Diffstat (limited to 'drivers/mfd/mcp-sa11x0.c')
| -rw-r--r-- | drivers/mfd/mcp-sa11x0.c | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c new file mode 100644 index 000000000000..7daa0ed7331c --- /dev/null +++ b/drivers/mfd/mcp-sa11x0.c @@ -0,0 +1,273 @@ +/* + * linux/drivers/mfd/mcp-sa11x0.c + * + * Copyright (C) 2001-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * SA11x0 MCP (Multimedia Communications Port) driver. + * + * MCP read/write timeouts from Jordi Colomer, rehacked by rmk. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <asm/dma.h> +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/system.h> +#include <asm/arch/mcp.h> + +#include <asm/arch/assabet.h> + +#include "mcp.h" + +struct mcp_sa11x0 { + u32 mccr0; + u32 mccr1; +}; + +#define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp)) + +static void +mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor) +{ + unsigned int mccr0; + + divisor /= 32; + + mccr0 = Ser4MCCR0 & ~0x00007f00; + mccr0 |= divisor << 8; + Ser4MCCR0 = mccr0; +} + +static void +mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) +{ + unsigned int mccr0; + + divisor /= 32; + + mccr0 = Ser4MCCR0 & ~0x0000007f; + mccr0 |= divisor; + Ser4MCCR0 = mccr0; +} + +/* + * Write data to the device. The bit should be set after 3 subframe + * times (each frame is 64 clocks). We wait a maximum of 6 subframes. + * We really should try doing something more productive while we + * wait. + */ +static void +mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) +{ + int ret = -ETIME; + int i; + + Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff); + + for (i = 0; i < 2; i++) { + udelay(mcp->rw_timeout); + if (Ser4MCSR & MCSR_CWC) { + ret = 0; + break; + } + } + + if (ret < 0) + printk(KERN_WARNING "mcp: write timed out\n"); +} + +/* + * Read data from the device. The bit should be set after 3 subframe + * times (each frame is 64 clocks). We wait a maximum of 6 subframes. + * We really should try doing something more productive while we + * wait. + */ +static unsigned int +mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) +{ + int ret = -ETIME; + int i; + + Ser4MCDR2 = reg << 17 | MCDR2_Rd; + + for (i = 0; i < 2; i++) { + udelay(mcp->rw_timeout); + if (Ser4MCSR & MCSR_CRC) { + ret = Ser4MCDR2 & 0xffff; + break; + } + } + + if (ret < 0) + printk(KERN_WARNING "mcp: read timed out\n"); + + return ret; +} + +static void mcp_sa11x0_enable(struct mcp *mcp) +{ + Ser4MCSR = -1; + Ser4MCCR0 |= MCCR0_MCE; +} + +static void mcp_sa11x0_disable(struct mcp *mcp) +{ + Ser4MCCR0 &= ~MCCR0_MCE; +} + +/* + * Our methods. + */ +static struct mcp_ops mcp_sa11x0 = { + .set_telecom_divisor = mcp_sa11x0_set_telecom_divisor, + .set_audio_divisor = mcp_sa11x0_set_audio_divisor, + .reg_write = mcp_sa11x0_write, + .reg_read = mcp_sa11x0_read, + .enable = mcp_sa11x0_enable, + .disable = mcp_sa11x0_disable, +}; + +static int mcp_sa11x0_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct mcp_plat_data *data = pdev->dev.platform_data; + struct mcp *mcp; + int ret; + + if (!data) + return -ENODEV; + + if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) + return -EBUSY; + + mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0)); + if (!mcp) { + ret = -ENOMEM; + goto release; + } + + mcp->owner = THIS_MODULE; + mcp->ops = &mcp_sa11x0; + mcp->sclk_rate = data->sclk_rate; + mcp->dma_audio_rd = DMA_Ser4MCP0Rd; + mcp->dma_audio_wr = DMA_Ser4MCP0Wr; + mcp->dma_telco_rd = DMA_Ser4MCP1Rd; + mcp->dma_telco_wr = DMA_Ser4MCP1Wr; + + dev_set_drvdata(dev, mcp); + + if (machine_is_assabet()) { + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + } + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + + /* + * Initialise device. Note that we initially + * set the sampling rate to minimum. + */ + Ser4MCSR = -1; + Ser4MCCR1 = data->mccr1; + Ser4MCCR0 = data->mccr0 | 0x7f7f; + + /* + * Calculate the read/write timeout (us) from the bit clock + * rate. This is the period for 3 64-bit frames. Always + * round this time up. + */ + mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / + mcp->sclk_rate; + + ret = mcp_host_register(mcp); + if (ret == 0) + goto out; + + release: + release_mem_region(0x80060000, 0x60); + dev_set_drvdata(dev, NULL); + + out: + return ret; +} + +static int mcp_sa11x0_remove(struct device *dev) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + mcp_host_unregister(mcp); + release_mem_region(0x80060000, 0x60); + + return 0; +} + +static int mcp_sa11x0_suspend(struct device *dev, pm_message_t state) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + priv(mcp)->mccr0 = Ser4MCCR0; + priv(mcp)->mccr1 = Ser4MCCR1; + Ser4MCCR0 &= ~MCCR0_MCE; + + return 0; +} + +static int mcp_sa11x0_resume(struct device *dev) +{ + struct mcp *mcp = dev_get_drvdata(dev); + + Ser4MCCR1 = priv(mcp)->mccr1; + Ser4MCCR0 = priv(mcp)->mccr0; + + return 0; +} + +/* + * The driver for the SA11x0 MCP port. + */ +static struct device_driver mcp_sa11x0_driver = { + .name = "sa11x0-mcp", + .bus = &platform_bus_type, + .probe = mcp_sa11x0_probe, + .remove = mcp_sa11x0_remove, + .suspend = mcp_sa11x0_suspend, + .resume = mcp_sa11x0_resume, +}; + +/* + * This needs re-working + */ +static int __init mcp_sa11x0_init(void) +{ + return driver_register(&mcp_sa11x0_driver); +} + +static void __exit mcp_sa11x0_exit(void) +{ + driver_unregister(&mcp_sa11x0_driver); +} + +module_init(mcp_sa11x0_init); +module_exit(mcp_sa11x0_exit); + +MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); +MODULE_DESCRIPTION("SA11x0 multimedia communications port driver"); +MODULE_LICENSE("GPL"); |