diff options
Diffstat (limited to 'drivers/mfd/timberdale.h')
| -rw-r--r-- | drivers/mfd/timberdale.h | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h new file mode 100644 index 000000000000..8d27ffabc25d --- /dev/null +++ b/drivers/mfd/timberdale.h @@ -0,0 +1,130 @@ +/* + * timberdale.h timberdale FPGA MFD driver defines + * Copyright (c) 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * Timberdale FPGA + */ + +#ifndef MFD_TIMBERDALE_H +#define MFD_TIMBERDALE_H + +#define DRV_VERSION "0.1" + +/* This driver only support versions >= 3.8 and < 4.0 */ +#define TIMB_SUPPORTED_MAJOR 3 + +/* This driver only support minor >= 8 */ +#define TIMB_REQUIRED_MINOR 8 + +/* Registers of the control area */ +#define TIMB_REV_MAJOR 0x00 +#define TIMB_REV_MINOR 0x04 +#define TIMB_HW_CONFIG 0x08 +#define TIMB_SW_RST 0x40 + +/* bits in the TIMB_HW_CONFIG register */ +#define TIMB_HW_CONFIG_SPI_8BIT 0x80 + +#define TIMB_HW_VER_MASK 0x0f +#define TIMB_HW_VER0 0x00 +#define TIMB_HW_VER1 0x01 +#define TIMB_HW_VER2 0x02 +#define TIMB_HW_VER3 0x03 + +#define OCORESOFFSET 0x0 +#define OCORESEND 0x1f + +#define SPIOFFSET 0x80 +#define SPIEND 0xff + +#define UARTLITEOFFSET 0x100 +#define UARTLITEEND 0x10f + +#define RDSOFFSET 0x180 +#define RDSEND 0x183 + +#define ETHOFFSET 0x300 +#define ETHEND 0x3ff + +#define GPIOOFFSET 0x400 +#define GPIOEND 0x7ff + +#define CHIPCTLOFFSET 0x800 +#define CHIPCTLEND 0x8ff +#define CHIPCTLSIZE (CHIPCTLEND - CHIPCTLOFFSET) + +#define INTCOFFSET 0xc00 +#define INTCEND 0xfff +#define INTCSIZE (INTCEND - INTCOFFSET) + +#define MOSTOFFSET 0x1000 +#define MOSTEND 0x13ff + +#define UARTOFFSET 0x1400 +#define UARTEND 0x17ff + +#define XIICOFFSET 0x1800 +#define XIICEND 0x19ff + +#define I2SOFFSET 0x1C00 +#define I2SEND 0x1fff + +#define LOGIWOFFSET 0x30000 +#define LOGIWEND 0x37fff + +#define MLCOREOFFSET 0x40000 +#define MLCOREEND 0x43fff + +#define DMAOFFSET 0x01000000 +#define DMAEND 0x013fffff + +/* SDHC0 is placed in PCI bar 1 */ +#define SDHC0OFFSET 0x00 +#define SDHC0END 0xff + +/* SDHC1 is placed in PCI bar 2 */ +#define SDHC1OFFSET 0x00 +#define SDHC1END 0xff + +#define PCI_VENDOR_ID_TIMB 0x10ee +#define PCI_DEVICE_ID_TIMB 0xa123 + +#define IRQ_TIMBERDALE_INIC 0 +#define IRQ_TIMBERDALE_MLB 1 +#define IRQ_TIMBERDALE_GPIO 2 +#define IRQ_TIMBERDALE_I2C 3 +#define IRQ_TIMBERDALE_UART 4 +#define IRQ_TIMBERDALE_DMA 5 +#define IRQ_TIMBERDALE_I2S 6 +#define IRQ_TIMBERDALE_TSC_INT 7 +#define IRQ_TIMBERDALE_SDHC 8 +#define IRQ_TIMBERDALE_ADV7180 9 +#define IRQ_TIMBERDALE_ETHSW_IF 10 +#define IRQ_TIMBERDALE_SPI 11 +#define IRQ_TIMBERDALE_UARTLITE 12 +#define IRQ_TIMBERDALE_MLCORE 13 +#define IRQ_TIMBERDALE_MLCORE_BUF 14 +#define IRQ_TIMBERDALE_RDS 15 +#define TIMBERDALE_NR_IRQS 16 + +#define GPIO_PIN_ASCB 8 +#define GPIO_PIN_INIC_RST 14 +#define GPIO_PIN_BT_RST 15 +#define GPIO_NR_PINS 16 + +#endif |