diff options
Diffstat (limited to 'drivers/mfd')
-rw-r--r-- | drivers/mfd/Kconfig | 10 | ||||
-rw-r--r-- | drivers/mfd/Makefile | 1 | ||||
-rw-r--r-- | drivers/mfd/aat2870-core.c | 535 |
3 files changed, 546 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index c26136443c05..21574bdf485f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -760,6 +760,16 @@ config MFD_PM8XXX_IRQ config TPS65911_COMPARATOR tristate +config MFD_AAT2870_CORE + bool "Support for the AnalogicTech AAT2870" + select MFD_CORE + depends on I2C=y && GPIOLIB + help + If you say yes here you get support for the AAT2870. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ca1867db3db8..c58020303d18 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -101,3 +101,4 @@ obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o +obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c new file mode 100644 index 000000000000..345dc658ef06 --- /dev/null +++ b/drivers/mfd/aat2870-core.c @@ -0,0 +1,535 @@ +/* + * linux/drivers/mfd/aat2870-core.c + * + * Copyright (c) 2011, NVIDIA Corporation. + * Author: Jin Park <jinyoungp@nvidia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/debugfs.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/mfd/aat2870.h> +#include <linux/regulator/machine.h> + +static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = { + /* readable, writeable, value */ + { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */ + { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */ + { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */ + { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */ + { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */ + { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */ + { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */ + { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */ + { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */ + { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */ + { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */ + { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */ + { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */ + { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */ + { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */ + { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */ + { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */ + { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */ + { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */ + { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */ + { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */ + { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */ + { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */ + { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */ + { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */ + { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */ + { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */ + { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */ + { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */ + { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */ + { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */ + { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */ + { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */ + { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */ + { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */ + { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */ + { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */ + { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */ + { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */ +}; + +static struct mfd_cell aat2870_devs[] = { + { + .name = "aat2870-backlight", + .id = AAT2870_ID_BL, + .pdata_size = sizeof(struct aat2870_bl_platform_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOA, + .pdata_size = sizeof(struct regulator_init_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOB, + .pdata_size = sizeof(struct regulator_init_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOC, + .pdata_size = sizeof(struct regulator_init_data), + }, + { + .name = "aat2870-regulator", + .id = AAT2870_ID_LDOD, + .pdata_size = sizeof(struct regulator_init_data), + }, +}; + +static int __aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) +{ + int ret; + + if (addr >= AAT2870_REG_NUM) { + dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); + return -EINVAL; + } + + if (!aat2870->reg_cache[addr].readable) { + *val = aat2870->reg_cache[addr].value; + goto out; + } + + ret = i2c_master_send(aat2870->client, &addr, 1); + if (ret < 0) + return ret; + if (ret != 1) + return -EIO; + + ret = i2c_master_recv(aat2870->client, val, 1); + if (ret < 0) + return ret; + if (ret != 1) + return -EIO; + +out: + dev_dbg(aat2870->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val); + return 0; +} + +static int __aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) +{ + u8 msg[2]; + int ret; + + if (addr >= AAT2870_REG_NUM) { + dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); + return -EINVAL; + } + + if (!aat2870->reg_cache[addr].writeable) { + dev_err(aat2870->dev, "Address 0x%02x is not writeable\n", + addr); + return -EINVAL; + } + + msg[0] = addr; + msg[1] = val; + ret = i2c_master_send(aat2870->client, msg, 2); + if (ret < 0) + return ret; + if (ret != 2) + return -EIO; + + aat2870->reg_cache[addr].value = val; + + dev_dbg(aat2870->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val); + return 0; +} + +static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) +{ + int ret; + + mutex_lock(&aat2870->io_lock); + ret = __aat2870_read(aat2870, addr, val); + mutex_unlock(&aat2870->io_lock); + + return ret; +} + +static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) +{ + int ret; + + mutex_lock(&aat2870->io_lock); + ret = __aat2870_write(aat2870, addr, val); + mutex_unlock(&aat2870->io_lock); + + return ret; +} + +static int aat2870_update(struct aat2870_data *aat2870, u8 addr, u8 mask, + u8 val) +{ + int change; + u8 old_val, new_val; + int ret; + + mutex_lock(&aat2870->io_lock); + + ret = __aat2870_read(aat2870, addr, &old_val); + if (ret) + goto out_unlock; + + new_val = (old_val & ~mask) | (val & mask); + change = old_val != new_val; + if (change) + ret = __aat2870_write(aat2870, addr, new_val); + +out_unlock: + mutex_unlock(&aat2870->io_lock); + + return ret; +} + +static inline void aat2870_enable(struct aat2870_data *aat2870) +{ + if (aat2870->en_pin >= 0) + gpio_set_value(aat2870->en_pin, 1); + + aat2870->is_enable = 1; +} + +static inline void aat2870_disable(struct aat2870_data *aat2870) +{ + if (aat2870->en_pin >= 0) + gpio_set_value(aat2870->en_pin, 0); + + aat2870->is_enable = 0; +} + +#ifdef CONFIG_DEBUG_FS +static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf) +{ + u8 addr, val; + ssize_t count = 0; + int ret; + + count += sprintf(buf, "aat2870 registers\n"); + for (addr = 0; addr < AAT2870_REG_NUM; addr++) { + count += sprintf(buf + count, "0x%02x: ", addr); + if (count >= PAGE_SIZE - 1) + break; + + ret = aat2870->read(aat2870, addr, &val); + if (ret == 0) + count += snprintf(buf + count, PAGE_SIZE - count, + "0x%02x", val); + else + count += snprintf(buf + count, PAGE_SIZE - count, + "<read fail: %d>", ret); + + if (count >= PAGE_SIZE - 1) + break; + + count += snprintf(buf + count, PAGE_SIZE - count, "\n"); + if (count >= PAGE_SIZE - 1) + break; + } + + /* Truncate count; min() would cause a warning */ + if (count >= PAGE_SIZE) + count = PAGE_SIZE - 1; + + return count; +} + +static int aat2870_reg_open_file(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + + return 0; +} + +static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct aat2870_data *aat2870 = file->private_data; + char *buf; + ssize_t ret; + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = aat2870_dump_reg(aat2870, buf); + if (ret >= 0) + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + + kfree(buf); + + return ret; +} + +static ssize_t aat2870_reg_write_file(struct file *file, + const char __user *user_buf, size_t count, + loff_t *ppos) +{ + struct aat2870_data *aat2870 = file->private_data; + char buf[32]; + int buf_size; + char *start = buf; + unsigned long addr, val; + int ret; + + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) { + dev_err(aat2870->dev, "Failed to copy from user\n"); + return -EFAULT; + } + buf[buf_size] = 0; + + while (*start == ' ') + start++; + + addr = simple_strtoul(start, &start, 16); + if (addr >= AAT2870_REG_NUM) { + dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr); + return -EINVAL; + } + + while (*start == ' ') + start++; + + if (strict_strtoul(start, 16, &val)) + return -EINVAL; + + ret = aat2870->write(aat2870, (u8)addr, (u8)val); + if (ret) + return ret; + + return buf_size; +} + +static const struct file_operations aat2870_reg_fops = { + .open = aat2870_reg_open_file, + .read = aat2870_reg_read_file, + .write = aat2870_reg_write_file, +}; + +static void aat2870_init_debugfs(struct aat2870_data *aat2870) +{ + aat2870->dentry_root = debugfs_create_dir("aat2870", NULL); + if (!aat2870->dentry_root) { + dev_warn(aat2870->dev, + "Failed to create debugfs root directory\n"); + return; + } + + aat2870->dentry_reg = debugfs_create_file("regs", 0644, + aat2870->dentry_root, + aat2870, &aat2870_reg_fops); + if (!aat2870->dentry_reg) + dev_warn(aat2870->dev, + "Failed to create debugfs register file\n"); +} + +static void aat2870_uninit_debugfs(struct aat2870_data *aat2870) +{ + debugfs_remove_recursive(aat2870->dentry_root); +} +#else +static inline void aat2870_init_debugfs(struct aat2870_data *aat2870) +{ +} + +static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static int aat2870_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct aat2870_platform_data *pdata = client->dev.platform_data; + struct aat2870_data *aat2870; + int i, j; + int ret = 0; + + aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL); + if (!aat2870) { + dev_err(&client->dev, + "Failed to allocate memory for aat2870\n"); + ret = -ENOMEM; + goto out; + } + + aat2870->dev = &client->dev; + dev_set_drvdata(aat2870->dev, aat2870); + + aat2870->client = client; + i2c_set_clientdata(client, aat2870); + + aat2870->reg_cache = aat2870_regs; + + if (pdata->en_pin < 0) + aat2870->en_pin = -1; + else + aat2870->en_pin = pdata->en_pin; + + aat2870->init = pdata->init; + aat2870->uninit = pdata->uninit; + aat2870->read = aat2870_read; + aat2870->write = aat2870_write; + aat2870->update = aat2870_update; + + mutex_init(&aat2870->io_lock); + + if (aat2870->init) + aat2870->init(aat2870); + + if (aat2870->en_pin >= 0) { + ret = gpio_request(aat2870->en_pin, "aat2870-en"); + if (ret < 0) { + dev_err(&client->dev, + "Failed to request GPIO %d\n", aat2870->en_pin); + goto out_kfree; + } + gpio_direction_output(aat2870->en_pin, 1); + } + + aat2870_enable(aat2870); + + for (i = 0; i < pdata->num_subdevs; i++) { + for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) { + if ((pdata->subdevs[i].id == aat2870_devs[j].id) && + !strcmp(pdata->subdevs[i].name, + aat2870_devs[j].name)) { + aat2870_devs[j].platform_data = + pdata->subdevs[i].platform_data; + break; + } + } + } + + ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, + ARRAY_SIZE(aat2870_devs), NULL, 0); + if (ret != 0) { + dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); + goto out_disable; + } + + aat2870_init_debugfs(aat2870); + + return 0; + +out_disable: + aat2870_disable(aat2870); + if (aat2870->en_pin >= 0) + gpio_free(aat2870->en_pin); +out_kfree: + kfree(aat2870); +out: + return ret; +} + +static int aat2870_i2c_remove(struct i2c_client *client) +{ + struct aat2870_data *aat2870 = i2c_get_clientdata(client); + + aat2870_uninit_debugfs(aat2870); + + mfd_remove_devices(aat2870->dev); + aat2870_disable(aat2870); + if (aat2870->en_pin >= 0) + gpio_free(aat2870->en_pin); + if (aat2870->uninit) + aat2870->uninit(aat2870); + kfree(aat2870); + + return 0; +} + +#ifdef CONFIG_PM +static int aat2870_i2c_suspend(struct i2c_client *client, pm_message_t state) +{ + struct aat2870_data *aat2870 = i2c_get_clientdata(client); + + aat2870_disable(aat2870); + + return 0; +} + +static int aat2870_i2c_resume(struct i2c_client *client) +{ + struct aat2870_data *aat2870 = i2c_get_clientdata(client); + struct aat2870_register *reg = NULL; + int i; + + aat2870_enable(aat2870); + + /* restore registers */ + for (i = 0; i < AAT2870_REG_NUM; i++) { + reg = &aat2870->reg_cache[i]; + if (reg->writeable) + aat2870->write(aat2870, i, reg->value); + } + + return 0; +} +#else +#define aat2870_i2c_suspend NULL +#define aat2870_i2c_resume NULL +#endif /* CONFIG_PM */ + +static struct i2c_device_id aat2870_i2c_id_table[] = { + { "aat2870", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table); + +static struct i2c_driver aat2870_i2c_driver = { + .driver = { + .name = "aat2870", + .owner = THIS_MODULE, + }, + .probe = aat2870_i2c_probe, + .remove = aat2870_i2c_remove, + .suspend = aat2870_i2c_suspend, + .resume = aat2870_i2c_resume, + .id_table = aat2870_i2c_id_table, +}; + +static int __init aat2870_init(void) +{ + return i2c_add_driver(&aat2870_i2c_driver); +} +subsys_initcall(aat2870_init); + +static void __exit aat2870_exit(void) +{ + i2c_del_driver(&aat2870_i2c_driver); +} +module_exit(aat2870_exit); + +MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jin Park <jinyoungp@nvidia.com>"); |