summaryrefslogtreecommitdiffstats
path: root/drivers/misc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc')
-rw-r--r--drivers/misc/Kconfig15
-rw-r--r--drivers/misc/ab8500-pwm.c1
-rw-r--r--drivers/misc/ad525x_dpot.h2
-rw-r--r--drivers/misc/atmel-ssc.c1
-rw-r--r--drivers/misc/atmel_tclib.c1
-rw-r--r--drivers/misc/bh1780gli.c1
-rw-r--r--drivers/misc/carma/carma-fpga-program.c9
-rw-r--r--drivers/misc/carma/carma-fpga.c9
-rw-r--r--drivers/misc/eeprom/Kconfig2
-rw-r--r--drivers/misc/kgdbts.c1
-rw-r--r--drivers/misc/pch_phub.c81
-rw-r--r--drivers/misc/sgi-gru/grukservices.c1
-rw-r--r--drivers/misc/spear13xx_pcie_gadget.c2
-rw-r--r--drivers/misc/ti-st/st_kim.c1
-rw-r--r--drivers/misc/tifm_7xx1.c1
-rw-r--r--drivers/misc/tifm_core.c1
16 files changed, 87 insertions, 42 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index d593878d66d0..5664696f2d3a 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -472,7 +472,7 @@ config BMP085
module will be called bmp085.
config PCH_PHUB
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
depends on PCI
help
This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -480,12 +480,13 @@ config PCH_PHUB
processor. The Topcliff has MAC address and Option ROM data in SROM.
This driver can access MAC address and Option ROM data in SROM.
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor's IOH,
+ ML7213/ML7223/ML7831.
+ ML7213 which is for IVI(In-Vehicle Infotainment) use.
+ ML7223 IOH is for MP(Media Phone) use.
+ ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
To compile this driver as a module, choose M here: the module will
be called pch_phub.
diff --git a/drivers/misc/ab8500-pwm.c b/drivers/misc/ab8500-pwm.c
index 35903154ca2e..2208a9d52622 100644
--- a/drivers/misc/ab8500-pwm.c
+++ b/drivers/misc/ab8500-pwm.c
@@ -10,6 +10,7 @@
#include <linux/pwm.h>
#include <linux/mfd/ab8500.h>
#include <linux/mfd/abx500.h>
+#include <linux/module.h>
/*
* PWM Out generators
diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h
index a662f5987b68..82b2cb77ae19 100644
--- a/drivers/misc/ad525x_dpot.h
+++ b/drivers/misc/ad525x_dpot.h
@@ -100,7 +100,7 @@ enum dpot_devid {
AD5293_ID = DPOT_CONF(F_RDACS_RW | F_SPI_16BIT, BRDAC0, 10, 27),
AD7376_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
BRDAC0, 7, 28),
- AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_8BIT,
+ AD8400_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
BRDAC0, 8, 29),
AD8402_ID = DPOT_CONF(F_RDACS_WONLY | F_AD_APPDATA | F_SPI_16BIT,
BRDAC0 | BRDAC1, 8, 30),
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 769a4e8e10dc..5bb187781074 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -16,6 +16,7 @@
#include <linux/spinlock.h>
#include <linux/atmel-ssc.h>
#include <linux/slab.h>
+#include <linux/module.h>
/* Serialize access to ssc_list and user count */
static DEFINE_SPINLOCK(user_lock);
diff --git a/drivers/misc/atmel_tclib.c b/drivers/misc/atmel_tclib.c
index a844810b50f6..4bcfc3759734 100644
--- a/drivers/misc/atmel_tclib.c
+++ b/drivers/misc/atmel_tclib.c
@@ -7,6 +7,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/export.h>
/* Number of bytes to reserve for the iomem resource */
#define ATMEL_TC_IOMEM_SIZE 256
diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c
index 82fe2d067827..bfeea9ba702e 100644
--- a/drivers/misc/bh1780gli.c
+++ b/drivers/misc/bh1780gli.c
@@ -22,6 +22,7 @@
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/module.h>
#define BH1780_REG_CONTROL 0x80
#define BH1780_REG_PARTID 0x8A
diff --git a/drivers/misc/carma/carma-fpga-program.c b/drivers/misc/carma/carma-fpga-program.c
index 7ce6065dc20e..eb5cd28bc6d8 100644
--- a/drivers/misc/carma/carma-fpga-program.c
+++ b/drivers/misc/carma/carma-fpga-program.c
@@ -945,8 +945,7 @@ static int fpga_of_remove(struct platform_device *op)
/* CTL-CPLD Version Register */
#define CTL_CPLD_VERSION 0x2000
-static int fpga_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int fpga_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
@@ -1107,7 +1106,7 @@ static struct of_device_id fpga_of_match[] = {
{},
};
-static struct of_platform_driver fpga_of_driver = {
+static struct platform_driver fpga_of_driver = {
.probe = fpga_of_probe,
.remove = fpga_of_remove,
.driver = {
@@ -1124,12 +1123,12 @@ static struct of_platform_driver fpga_of_driver = {
static int __init fpga_init(void)
{
led_trigger_register_simple("fpga", &ledtrig_fpga);
- return of_register_platform_driver(&fpga_of_driver);
+ return platform_driver_register(&fpga_of_driver);
}
static void __exit fpga_exit(void)
{
- of_unregister_platform_driver(&fpga_of_driver);
+ platform_driver_unregister(&fpga_of_driver);
led_trigger_unregister_simple(ledtrig_fpga);
}
diff --git a/drivers/misc/carma/carma-fpga.c b/drivers/misc/carma/carma-fpga.c
index 3965821fef17..14e974b2a781 100644
--- a/drivers/misc/carma/carma-fpga.c
+++ b/drivers/misc/carma/carma-fpga.c
@@ -1249,8 +1249,7 @@ static bool dma_filter(struct dma_chan *chan, void *data)
return true;
}
-static int data_of_probe(struct platform_device *op,
- const struct of_device_id *match)
+static int data_of_probe(struct platform_device *op)
{
struct device_node *of_node = op->dev.of_node;
struct device *this_device;
@@ -1401,7 +1400,7 @@ static struct of_device_id data_of_match[] = {
{},
};
-static struct of_platform_driver data_of_driver = {
+static struct platform_driver data_of_driver = {
.probe = data_of_probe,
.remove = data_of_remove,
.driver = {
@@ -1417,12 +1416,12 @@ static struct of_platform_driver data_of_driver = {
static int __init data_init(void)
{
- return of_register_platform_driver(&data_of_driver);
+ return platform_driver_register(&data_of_driver);
}
static void __exit data_exit(void)
{
- of_unregister_platform_driver(&data_of_driver);
+ platform_driver_unregister(&data_of_driver);
}
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig
index 26cf12ca7f50..701edf658970 100644
--- a/drivers/misc/eeprom/Kconfig
+++ b/drivers/misc/eeprom/Kconfig
@@ -85,7 +85,7 @@ config EEPROM_93XX46
config EEPROM_DIGSY_MTC_CFG
bool "DigsyMTC display configuration EEPROMs device"
- depends on PPC_MPC5200_GPIO && GPIOLIB && SPI_GPIO
+ depends on GPIO_MPC5200 && SPI_GPIO
help
This option enables access to display configuration EEPROMs
on digsy_mtc board. You have to additionally select Microwire
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 8cebec5e85ee..3f7ad83ed740 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -102,6 +102,7 @@
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/module.h>
#define v1printk(a...) do { \
if (verbose) \
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index dee33addcaeb..10fc4785dba7 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,10 +41,10 @@
#define PCH_PHUB_ROM_START_ADDR_EG20T 0x80 /* ROM data area start address offset
(Intel EG20T PCH)*/
#define PCH_PHUB_ROM_START_ADDR_ML7213 0x400 /* ROM data area start address
- offset(OKI SEMICONDUCTOR ML7213)
+ offset(LAPIS Semicon ML7213)
*/
#define PCH_PHUB_ROM_START_ADDR_ML7223 0x400 /* ROM data area start address
- offset(OKI SEMICONDUCTOR ML7223)
+ offset(LAPIS Semicon ML7223)
*/
/* MAX number of INT_REDUCE_CONTROL registers */
@@ -73,6 +73,9 @@
#define PCI_DEVICE_ID_ROHM_ML7223_mPHUB 0x8012 /* for Bus-m */
#define PCI_DEVICE_ID_ROHM_ML7223_nPHUB 0x8002 /* for Bus-n */
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801
+
/* SROM ACCESS Macro */
#define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
@@ -115,6 +118,7 @@
* @pch_mac_start_address: MAC address area start address
* @pch_opt_rom_start_address: Option ROM start address
* @ioh_type: Save IOH type
+ * @pdev: pointer to pci device struct
*/
struct pch_phub_reg {
u32 phub_id_reg;
@@ -136,6 +140,7 @@ struct pch_phub_reg {
u32 pch_mac_start_address;
u32 pch_opt_rom_start_address;
int ioh_type;
+ struct pci_dev *pdev;
};
/* SROM SPEC for MAC address assignment offset */
@@ -471,7 +476,7 @@ static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
int retval;
int i;
- if (chip->ioh_type == 1) /* EG20T */
+ if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/
retval = pch_phub_gbe_serial_rom_conf(chip);
else /* ML7223 */
retval = pch_phub_gbe_serial_rom_conf_mp(chip);
@@ -498,6 +503,7 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj,
unsigned int orom_size;
int ret;
int err;
+ ssize_t rom_size;
struct pch_phub_reg *chip =
dev_get_drvdata(container_of(kobj, struct device, kobj));
@@ -509,6 +515,10 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj,
}
/* Get Rom signature */
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address)
+ goto exrom_map_err;
+
pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address,
(unsigned char *)&rom_signature);
rom_signature &= 0xff;
@@ -539,10 +549,13 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj,
goto return_err;
}
return_ok:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
mutex_unlock(&pch_phub_mutex);
return addr_offset;
return_err:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+exrom_map_err:
mutex_unlock(&pch_phub_mutex);
return_err_nomutex:
return err;
@@ -555,6 +568,7 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj,
int err;
unsigned int addr_offset;
int ret;
+ ssize_t rom_size;
struct pch_phub_reg *chip =
dev_get_drvdata(container_of(kobj, struct device, kobj));
@@ -571,6 +585,12 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj,
goto return_ok;
}
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address) {
+ err = -ENOMEM;
+ goto exrom_map_err;
+ }
+
for (addr_offset = 0; addr_offset < count; addr_offset++) {
if (PCH_PHUB_OROM_SIZE < off + addr_offset)
goto return_ok;
@@ -585,10 +605,14 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj,
}
return_ok:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
mutex_unlock(&pch_phub_mutex);
return addr_offset;
return_err:
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
+
+exrom_map_err:
mutex_unlock(&pch_phub_mutex);
return err;
}
@@ -598,8 +622,14 @@ static ssize_t show_pch_mac(struct device *dev, struct device_attribute *attr,
{
u8 mac[8];
struct pch_phub_reg *chip = dev_get_drvdata(dev);
+ ssize_t rom_size;
+
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address)
+ return -ENOMEM;
pch_phub_read_gbe_mac_addr(chip, mac);
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
return sprintf(buf, "%pM\n", mac);
}
@@ -608,6 +638,7 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
u8 mac[6];
+ ssize_t rom_size;
struct pch_phub_reg *chip = dev_get_drvdata(dev);
if (count != 18)
@@ -617,7 +648,12 @@ static ssize_t store_pch_mac(struct device *dev, struct device_attribute *attr,
(u32 *)&mac[0], (u32 *)&mac[1], (u32 *)&mac[2], (u32 *)&mac[3],
(u32 *)&mac[4], (u32 *)&mac[5]);
+ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size);
+ if (!chip->pch_phub_extrom_base_address)
+ return -ENOMEM;
+
pch_phub_write_gbe_mac_addr(chip, mac);
+ pci_unmap_rom(chip->pdev, chip->pch_phub_extrom_base_address);
return count;
}
@@ -640,7 +676,6 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
int retval;
int ret;
- ssize_t rom_size;
struct pch_phub_reg *chip;
chip = kzalloc(sizeof(struct pch_phub_reg), GFP_KERNEL);
@@ -677,19 +712,7 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
"in pch_phub_base_address variable is %p\n", __func__,
chip->pch_phub_base_address);
- if (id->driver_data != 3) {
- chip->pch_phub_extrom_base_address =\
- pci_map_rom(pdev, &rom_size);
- if (chip->pch_phub_extrom_base_address == 0) {
- dev_err(&pdev->dev, "%s: pci_map_rom FAILED", __func__);
- ret = -ENOMEM;
- goto err_pci_map;
- }
- dev_dbg(&pdev->dev, "%s : "
- "pci_map_rom SUCCESS and value in "
- "pch_phub_extrom_base_address variable is %p\n",
- __func__, chip->pch_phub_extrom_base_address);
- }
+ chip->pdev = pdev; /* Save pci device struct */
if (id->driver_data == 1) { /* EG20T PCH */
const char *board_name;
@@ -763,6 +786,22 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
chip->pch_opt_rom_start_address =\
PCH_PHUB_ROM_START_ADDR_ML7223;
chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+ } else if (id->driver_data == 5) { /* ML7831 */
+ retval = sysfs_create_file(&pdev->dev.kobj,
+ &dev_attr_pch_mac.attr);
+ if (retval)
+ goto err_sysfs_create;
+
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+ if (retval)
+ goto exit_bin_attr;
+
+ /* set the prefech value */
+ iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+ /* set the interrupt delay value */
+ iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+ chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+ chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
}
chip->ioh_type = id->driver_data;
@@ -773,8 +812,6 @@ exit_bin_attr:
sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
err_sysfs_create:
- pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
-err_pci_map:
pci_iounmap(pdev, chip->pch_phub_base_address);
err_pci_iomap:
pci_release_regions(pdev);
@@ -792,7 +829,6 @@ static void __devexit pch_phub_remove(struct pci_dev *pdev)
sysfs_remove_file(&pdev->dev.kobj, &dev_attr_pch_mac.attr);
sysfs_remove_bin_file(&pdev->dev.kobj, &pch_bin_attr);
- pci_unmap_rom(pdev, chip->pch_phub_extrom_base_address);
pci_iounmap(pdev, chip->pch_phub_base_address);
pci_release_regions(pdev);
pci_disable_device(pdev);
@@ -847,6 +883,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = {
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4, },
+ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5, },
{ }
};
MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
@@ -873,5 +910,5 @@ static void __exit pch_phub_pci_exit(void)
module_init(pch_phub_pci_init);
module_exit(pch_phub_pci_exit);
-MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB");
+MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7223) PHUB");
MODULE_LICENSE("GPL");
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 9e9bddaa95ae..913de07e577c 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -31,6 +31,7 @@
#include <linux/interrupt.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
+#include <linux/export.h>
#include <asm/io_apic.h>
#include "gru.h"
#include "grulib.h"
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index cfbddbef11de..43d073bc1d9c 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -903,6 +903,6 @@ static void __exit spear_pcie_gadget_exit(void)
}
module_exit(spear_pcie_gadget_exit);
-MODULE_ALIAS("pcie-gadget-spear");
+MODULE_ALIAS("platform:pcie-gadget-spear");
MODULE_AUTHOR("Pratyush Anand");
MODULE_LICENSE("GPL");
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 3a3580566dfc..43ef8d162f2d 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -35,6 +35,7 @@
#include <linux/skbuff.h>
#include <linux/ti_wilink_st.h>
+#include <linux/module.h>
#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */
diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c
index a6ef18259da0..ba2479022670 100644
--- a/drivers/misc/tifm_7xx1.c
+++ b/drivers/misc/tifm_7xx1.c
@@ -11,6 +11,7 @@
#include <linux/tifm.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
#define DRIVER_NAME "tifm_7xx1"
#define DRIVER_VERSION "0.8"
diff --git a/drivers/misc/tifm_core.c b/drivers/misc/tifm_core.c
index 44d4475a09dd..0bd5349b0422 100644
--- a/drivers/misc/tifm_core.c
+++ b/drivers/misc/tifm_core.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/idr.h>
+#include <linux/module.h>
#define DRIVER_NAME "tifm_core"
#define DRIVER_VERSION "0.8"