diff options
Diffstat (limited to 'drivers/misc')
| -rw-r--r-- | drivers/misc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/c2port/core.c | 4 | ||||
| -rw-r--r-- | drivers/misc/ds1682.c | 6 | ||||
| -rw-r--r-- | drivers/misc/eeprom/at24.c | 65 | ||||
| -rw-r--r-- | drivers/misc/eeprom/at25.c | 6 | ||||
| -rw-r--r-- | drivers/misc/eeprom/eeprom.c | 39 | ||||
| -rw-r--r-- | drivers/misc/eeprom/eeprom_93cx6.c | 39 | ||||
| -rw-r--r-- | drivers/misc/eeprom/max6875.c | 54 | ||||
| -rw-r--r-- | drivers/misc/hdpuftrs/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/hdpuftrs/hdpu_cpustate.c | 256 | ||||
| -rw-r--r-- | drivers/misc/hdpuftrs/hdpu_nexus.c | 149 | ||||
| -rw-r--r-- | drivers/misc/vmware_balloon.c | 4 |
12 files changed, 125 insertions, 499 deletions
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 7b6f7eefdf8d..f12dc3e54402 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -3,7 +3,6 @@ # obj-$(CONFIG_IBM_ASM) += ibmasm/ -obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index ed090e77c9cd..19fc7c1cb428 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -707,7 +707,7 @@ static ssize_t __c2port_read_flash_data(struct c2port_device *dev, return nread; } -static ssize_t c2port_read_flash_data(struct kobject *kobj, +static ssize_t c2port_read_flash_data(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buffer, loff_t offset, size_t count) { @@ -824,7 +824,7 @@ static ssize_t __c2port_write_flash_data(struct c2port_device *dev, return nwrite; } -static ssize_t c2port_write_flash_data(struct kobject *kobj, +static ssize_t c2port_write_flash_data(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buffer, loff_t offset, size_t count) { diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c index 9197cfc55015..a513f0aa6432 100644 --- a/drivers/misc/ds1682.c +++ b/drivers/misc/ds1682.c @@ -140,7 +140,8 @@ static const struct attribute_group ds1682_group = { /* * User data attribute */ -static ssize_t ds1682_eeprom_read(struct kobject *kobj, struct bin_attribute *attr, +static ssize_t ds1682_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct i2c_client *client = kobj_to_i2c_client(kobj); @@ -163,7 +164,8 @@ static ssize_t ds1682_eeprom_read(struct kobject *kobj, struct bin_attribute *at return count; } -static ssize_t ds1682_eeprom_write(struct kobject *kobj, struct bin_attribute *attr, +static ssize_t ds1682_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct i2c_client *client = kobj_to_i2c_client(kobj); diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index db7d0f21b65d..f7ca3a42b490 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -54,7 +54,7 @@ struct at24_data { struct at24_platform_data chip; struct memory_accessor macc; - bool use_smbus; + int use_smbus; /* * Lock protects against activities from other Linux tasks, @@ -184,11 +184,19 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, if (count > io_limit) count = io_limit; - if (at24->use_smbus) { + switch (at24->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: /* Smaller eeproms can work given some SMBus extension calls */ if (count > I2C_SMBUS_BLOCK_MAX) count = I2C_SMBUS_BLOCK_MAX; - } else { + break; + case I2C_SMBUS_WORD_DATA: + count = 2; + break; + case I2C_SMBUS_BYTE_DATA: + count = 1; + break; + default: /* * When we have a better choice than SMBus calls, use a * combined I2C message. Write address; then read up to @@ -219,10 +227,27 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, timeout = jiffies + msecs_to_jiffies(write_timeout); do { read_time = jiffies; - if (at24->use_smbus) { + switch (at24->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: status = i2c_smbus_read_i2c_block_data(client, offset, count, buf); - } else { + break; + case I2C_SMBUS_WORD_DATA: + status = i2c_smbus_read_word_data(client, offset); + if (status >= 0) { + buf[0] = status & 0xff; + buf[1] = status >> 8; + status = count; + } + break; + case I2C_SMBUS_BYTE_DATA: + status = i2c_smbus_read_byte_data(client, offset); + if (status >= 0) { + buf[0] = status; + status = count; + } + break; + default: status = i2c_transfer(client->adapter, msg, 2); if (status == 2) status = count; @@ -274,7 +299,8 @@ static ssize_t at24_read(struct at24_data *at24, return retval; } -static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr, +static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct at24_data *at24; @@ -395,7 +421,8 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, return retval; } -static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr, +static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct at24_data *at24; @@ -434,7 +461,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct at24_platform_data chip; bool writable; - bool use_smbus = false; + int use_smbus = 0; struct at24_data *at24; int err; unsigned i, num_addresses; @@ -475,12 +502,19 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) err = -EPFNOSUPPORT; goto err_out; } - if (!i2c_check_functionality(client->adapter, + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + use_smbus = I2C_SMBUS_I2C_BLOCK_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) { + use_smbus = I2C_SMBUS_WORD_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + use_smbus = I2C_SMBUS_BYTE_DATA; + } else { err = -EPFNOSUPPORT; goto err_out; } - use_smbus = true; } if (chip.flags & AT24_FLAG_TAKE8ADDR) @@ -566,11 +600,16 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) dev_info(&client->dev, "%zu byte %s EEPROM %s\n", at24->bin.size, client->name, writable ? "(writable)" : "(read-only)"); + if (use_smbus == I2C_SMBUS_WORD_DATA || + use_smbus == I2C_SMBUS_BYTE_DATA) { + dev_notice(&client->dev, "Falling back to %s reads, " + "performance will suffer\n", use_smbus == + I2C_SMBUS_WORD_DATA ? "word" : "byte"); + } dev_dbg(&client->dev, - "page_size %d, num_addresses %d, write_max %d%s\n", + "page_size %d, num_addresses %d, write_max %d, use_smbus %d\n", chip.page_size, num_addresses, - at24->write_max, - use_smbus ? ", use_smbus" : ""); + at24->write_max, use_smbus); /* export data to kernel code */ if (chip.setup) diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index d194212a41f6..c627e4174ccd 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -126,7 +126,8 @@ at25_ee_read( } static ssize_t -at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr, +at25_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct device *dev; @@ -253,7 +254,8 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, } static ssize_t -at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr, +at25_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct device *dev; diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c index f939ebc2507c..45060ddc4e59 100644 --- a/drivers/misc/eeprom/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c @@ -1,24 +1,20 @@ /* - Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and - Philip Edelbrock <phil@netroedge.com> - Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com> - Copyright (C) 2003 IBM Corp. - Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and + * Philip Edelbrock <phil@netroedge.com> + * Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ #include <linux/kernel.h> #include <linux/init.h> @@ -85,7 +81,8 @@ exit: mutex_unlock(&data->update_lock); } -static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr, +static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 15b1780025c8..7b33de95c4bf 100644 --- a/drivers/misc/eeprom/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c @@ -1,27 +1,20 @@ /* - Copyright (C) 2004 - 2006 rt2x00 SourceForge Project - <http://rt2x00.serialmonkey.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the - Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - Module: eeprom_93cx6 - Abstract: EEPROM reader routines for 93cx6 chipsets. - Supported chipsets: 93c46 & 93c66. + * Copyright (C) 2004 - 2006 rt2x00 SourceForge Project + * <http://rt2x00.serialmonkey.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Module: eeprom_93cx6 + * Abstract: EEPROM reader routines for 93cx6 chipsets. + * Supported chipsets: 93c46 & 93c66. */ #include <linux/kernel.h> diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c index 5a6b2bce8ad5..5653a3ce0517 100644 --- a/drivers/misc/eeprom/max6875.c +++ b/drivers/misc/eeprom/max6875.c @@ -1,30 +1,30 @@ /* - max6875.c - driver for MAX6874/MAX6875 - - Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> - - Based on eeprom.c - - The MAX6875 has a bank of registers and two banks of EEPROM. - Address ranges are defined as follows: - * 0x0000 - 0x0046 = configuration registers - * 0x8000 - 0x8046 = configuration EEPROM - * 0x8100 - 0x82FF = user EEPROM - - This driver makes the user EEPROM available for read. - - The registers & config EEPROM should be accessed via i2c-dev. - - The MAX6875 ignores the lowest address bit, so each chip responds to - two addresses - 0x50/0x51 and 0x52/0x53. - - Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read - address, so this driver is destructive if loaded for the wrong EEPROM chip. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; version 2 of the License. -*/ + * max6875.c - driver for MAX6874/MAX6875 + * + * Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com> + * + * Based on eeprom.c + * + * The MAX6875 has a bank of registers and two banks of EEPROM. + * Address ranges are defined as follows: + * * 0x0000 - 0x0046 = configuration registers + * * 0x8000 - 0x8046 = configuration EEPROM + * * 0x8100 - 0x82FF = user EEPROM + * + * This driver makes the user EEPROM available for read. + * + * The registers & config EEPROM should be accessed via i2c-dev. + * + * The MAX6875 ignores the lowest address bit, so each chip responds to + * two addresses - 0x50/0x51 and 0x52/0x53. + * + * Note that the MAX6875 uses i2c_smbus_write_byte_data() to set the read + * address, so this driver is destructive if loaded for the wrong EEPROM chip. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ #include <linux/kernel.h> #include <linux/init.h> @@ -107,7 +107,7 @@ exit_up: mutex_unlock(&data->update_lock); } -static ssize_t max6875_read(struct kobject *kobj, +static ssize_t max6875_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { diff --git a/drivers/misc/hdpuftrs/Makefile b/drivers/misc/hdpuftrs/Makefile deleted file mode 100644 index ac74ae679230..000000000000 --- a/drivers/misc/hdpuftrs/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_HDPU_FEATURES) := hdpu_cpustate.o hdpu_nexus.o diff --git a/drivers/misc/hdpuftrs/hdpu_cpustate.c b/drivers/misc/hdpuftrs/hdpu_cpustate.c deleted file mode 100644 index 176fe4e09d3f..000000000000 --- a/drivers/misc/hdpuftrs/hdpu_cpustate.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Sky CPU State Driver - * - * Copyright (C) 2002 Brian Waite - * - * This driver allows use of the CPU state bits - * It exports the /dev/sky_cpustate and also - * /proc/sky_cpustate pseudo-file for status information. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/spinlock.h> -#include <linux/smp_lock.h> -#include <linux/miscdevice.h> -#include <linux/proc_fs.h> -#include <linux/hdpu_features.h> -#include <linux/platform_device.h> -#include <asm/uaccess.h> -#include <linux/seq_file.h> -#include <asm/io.h> - -#define SKY_CPUSTATE_VERSION "1.1" - -static int hdpu_cpustate_probe(struct platform_device *pdev); -static int hdpu_cpustate_remove(struct platform_device *pdev); - -static unsigned char cpustate_get_state(void); -static int cpustate_proc_open(struct inode *inode, struct file *file); -static int cpustate_proc_read(struct seq_file *seq, void *offset); - -static struct cpustate_t cpustate; - -static const struct file_operations proc_cpustate = { - .open = cpustate_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int cpustate_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, cpustate_proc_read, NULL); -} - -static int cpustate_proc_read(struct seq_file *seq, void *offset) -{ - seq_printf(seq, "CPU State: %04x\n", cpustate_get_state()); - return 0; -} - -static int cpustate_get_ref(int excl) -{ - - int retval = -EBUSY; - - spin_lock(&cpustate.lock); - - if (cpustate.excl) - goto out_busy; - - if (excl) { - if (cpustate.open_count) - goto out_busy; - cpustate.excl = 1; - } - - cpustate.open_count++; - retval = 0; - - out_busy: - spin_unlock(&cpustate.lock); - return retval; -} - -static int cpustate_free_ref(void) -{ - - spin_lock(&cpustate.lock); - - cpustate.excl = 0; - cpustate.open_count--; - - spin_unlock(&cpustate.lock); - return 0; -} - -static unsigned char cpustate_get_state(void) -{ - - return cpustate.cached_val; -} - -static void cpustate_set_state(unsigned char new_state) -{ - unsigned int state = (new_state << 21); - -#ifdef DEBUG_CPUSTATE - printk("CPUSTATE -> 0x%x\n", new_state); -#endif - spin_lock(&cpustate.lock); - cpustate.cached_val = new_state; - writel((0xff << 21), cpustate.clr_addr); - writel(state, cpustate.set_addr); - spin_unlock(&cpustate.lock); -} - -/* - * Now all the various file operations that we export. - */ - -static ssize_t cpustate_read(struct file *file, char *buf, - size_t count, loff_t * ppos) -{ - unsigned char data; - - if (count < 0) - return -EFAULT; - if (count == 0) - return 0; - - data = cpustate_get_state(); - if (copy_to_user(buf, &data, sizeof(unsigned char))) - return -EFAULT; - return sizeof(unsigned char); -} - -static ssize_t cpustate_write(struct file *file, const char *buf, - size_t count, loff_t * ppos) -{ - unsigned char data; - - if (count < 0) - return -EFAULT; - - if (count == 0) - return 0; - - if (copy_from_user((unsigned char *)&data, buf, sizeof(unsigned char))) - return -EFAULT; - - cpustate_set_state(data); - return sizeof(unsigned char); -} - -static int cpustate_open(struct inode *inode, struct file *file) -{ - int ret; - - lock_kernel(); - ret = cpustate_get_ref((file->f_flags & O_EXCL)); - unlock_kernel(); - - return ret; -} - -static int cpustate_release(struct inode *inode, struct file *file) -{ - return cpustate_free_ref(); -} - -static struct platform_driver hdpu_cpustate_driver = { - .probe = hdpu_cpustate_probe, - .remove = hdpu_cpustate_remove, - .driver = { - .name = HDPU_CPUSTATE_NAME, - .owner = THIS_MODULE, - }, -}; - -/* - * The various file operations we support. - */ -static const struct file_operations cpustate_fops = { - .owner = THIS_MODULE, - .open = cpustate_open, - .release = cpustate_release, - .read = cpustate_read, - .write = cpustate_write, - .llseek = no_llseek, -}; - -static struct miscdevice cpustate_dev = { - .minor = MISC_DYNAMIC_MINOR, - .name = "sky_cpustate", - .fops = &cpustate_fops, -}; - -static int hdpu_cpustate_probe(struct platform_device *pdev) -{ - struct resource *res; - struct proc_dir_entry *proc_de; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - printk(KERN_ERR "sky_cpustate: " - "Invalid memory resource.\n"); - return -EINVAL; - } - cpustate.set_addr = (unsigned long *)res->start; - cpustate.clr_addr = (unsigned long *)res->end - 1; - - ret = misc_register(&cpustate_dev); - if (ret) { - printk(KERN_WARNING "sky_cpustate: " - "Unable to register misc device.\n"); - cpustate.set_addr = NULL; - cpustate.clr_addr = NULL; - return ret; - } - - proc_de = proc_create("sky_cpustate", 0666, NULL, &proc_cpustate); - if (!proc_de) { - printk(KERN_WARNING "sky_cpustate: " - "Unable to create proc entry\n"); - } - - printk(KERN_INFO "Sky CPU State Driver v" SKY_CPUSTATE_VERSION "\n"); - return 0; -} - -static int hdpu_cpustate_remove(struct platform_device *pdev) -{ - cpustate.set_addr = NULL; - cpustate.clr_addr = NULL; - - remove_proc_entry("sky_cpustate", NULL); - misc_deregister(&cpustate_dev); - - return 0; -} - -static int __init cpustate_init(void) -{ - return platform_driver_register(&hdpu_cpustate_driver); -} - -static void __exit cpustate_exit(void) -{ - platform_driver_unregister(&hdpu_cpustate_driver); -} - -module_init(cpustate_init); -module_exit(cpustate_exit); - -MODULE_AUTHOR("Brian Waite"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" HDPU_CPUSTATE_NAME); diff --git a/drivers/misc/hdpuftrs/hdpu_nexus.c b/drivers/misc/hdpuftrs/hdpu_nexus.c deleted file mode 100644 index ce39fa54949b..000000000000 --- a/drivers/misc/hdpuftrs/hdpu_nexus.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Sky Nexus Register Driver - * - * Copyright (C) 2002 Brian Waite - * - * This driver allows reading the Nexus register - * It exports the /proc/sky_chassis_id and also - * /proc/sky_slot_id pseudo-file for status information. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/proc_fs.h> -#include <linux/hdpu_features.h> -#include <linux/platform_device.h> -#include <linux/seq_file.h> -#include <asm/io.h> - -static int hdpu_nexus_probe(struct platform_device *pdev); -static int hdpu_nexus_remove(struct platform_device *pdev); -static int hdpu_slot_id_open(struct inode *inode, struct file *file); -static int hdpu_slot_id_read(struct seq_file *seq, void *offset); -static int hdpu_chassis_id_open(struct inode *inode, struct file *file); -static int hdpu_chassis_id_read(struct seq_file *seq, void *offset); - -static struct proc_dir_entry *hdpu_slot_id; -static struct proc_dir_entry *hdpu_chassis_id; -static int slot_id = -1; -static int chassis_id = -1; - -static const struct file_operations proc_slot_id = { - .open = hdpu_slot_id_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static const struct file_operations proc_chassis_id = { - .open = hdpu_chassis_id_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static struct platform_driver hdpu_nexus_driver = { - .probe = hdpu_nexus_probe, - .remove = hdpu_nexus_remove, - .driver = { - .name = HDPU_NEXUS_NAME, - .owner = THIS_MODULE, - }, -}; - -static int hdpu_slot_id_open(struct inode *inode, struct file *file) -{ - return single_open(file, hdpu_slot_id_read, NULL); -} - -static int hdpu_slot_id_read(struct seq_file *seq, void *offset) -{ - seq_printf(seq, "%d\n", slot_id); - return 0; -} - -static int hdpu_chassis_id_open(struct inode *inode, struct file *file) -{ - return single_open(file, hdpu_chassis_id_read, NULL); -} - -static int hdpu_chassis_id_read(struct seq_file *seq, void *offset) -{ - seq_printf(seq, "%d\n", chassis_id); - return 0; -} - -static int hdpu_nexus_probe(struct platform_device *pdev) -{ - struct resource *res; - int *nexus_id_addr; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - printk(KERN_ERR "sky_nexus: " - "Invalid memory resource.\n"); - return -EINVAL; - } - nexus_id_addr = ioremap(res->start, - (unsigned long)(res->end - res->start)); - if (nexus_id_addr) { - slot_id = (*nexus_id_addr >> 8) & 0x1f; - chassis_id = *nexus_id_addr & 0xff; - iounmap(nexus_id_addr); - } else { - printk(KERN_ERR "sky_nexus: Could not map slot id\n"); - } - - hdpu_slot_id = proc_create("sky_slot_id", 0666, NULL, &proc_slot_id); - if (!hdpu_slot_id) { - printk(KERN_WARNING "sky_nexus: " - "Unable to create proc dir entry: sky_slot_id\n"); - } - - hdpu_chassis_id = proc_create("sky_chassis_id", 0666, NULL, - &proc_chassis_id); - if (!hdpu_chassis_id) - printk(KERN_WARNING "sky_nexus: " - "Unable to create proc dir entry: sky_chassis_id\n"); - - return 0; -} - -static int hdpu_nexus_remove(struct platform_device *pdev) -{ - slot_id = -1; - chassis_id = -1; - - remove_proc_entry("sky_slot_id", NULL); - remove_proc_entry("sky_chassis_id", NULL); - - hdpu_slot_id = 0; - hdpu_chassis_id = 0; - - return 0; -} - -static int __init nexus_init(void) -{ - return platform_driver_register(&hdpu_nexus_driver); -} - -static void __exit nexus_exit(void) -{ - platform_driver_unregister(&hdpu_nexus_driver); -} - -module_init(nexus_init); -module_exit(nexus_exit); - -MODULE_AUTHOR("Brian Waite"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" HDPU_NEXUS_NAME); diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c index e7161c4e3798..db9cd0240c6f 100644 --- a/drivers/misc/vmware_balloon.c +++ b/drivers/misc/vmware_balloon.c @@ -41,7 +41,7 @@ #include <linux/workqueue.h> #include <linux/debugfs.h> #include <linux/seq_file.h> -#include <asm/vmware.h> +#include <asm/hypervisor.h> MODULE_AUTHOR("VMware, Inc."); MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver"); @@ -767,7 +767,7 @@ static int __init vmballoon_init(void) * Check if we are running on VMware's hypervisor and bail out * if we are not. */ - if (!vmware_platform()) + if (x86_hyper != &x86_hyper_vmware) return -ENODEV; vmballoon_wq = create_freezeable_workqueue("vmmemctl"); |