diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-esdhc-imx.c')
-rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 66 |
1 files changed, 57 insertions, 9 deletions
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 9e73c34b6401..58f042fdd4f4 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -338,6 +338,16 @@ struct pltfm_imx_data { struct clk *clk_ahb; struct clk *clk_per; unsigned int actual_clock; + + /* + * USDHC has one limition, require the SDIO device a different + * register setting. Driver has to recognize card type during + * the card init, but at this stage, mmc_host->card is not + * available. So involve this field to save the card type + * during card init through usdhc_init_card(). + */ + unsigned int init_card_type; + enum { NO_CMD_PENDING, /* no multiblock command pending */ MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */ @@ -430,9 +440,12 @@ static inline void esdhc_wait_for_card_clock_gate_off(struct sdhci_host *host) } /* Enable the auto tuning circuit to check the CMD line and BUS line */ -static inline void usdhc_auto_tuning_mode_sel(struct sdhci_host *host) +static inline void usdhc_auto_tuning_mode_sel_and_en(struct sdhci_host *host) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); u32 buswidth, auto_tune_buswidth; + u32 reg; buswidth = USDHC_GET_BUSWIDTH(readl(host->ioaddr + SDHCI_HOST_CONTROL)); @@ -448,9 +461,27 @@ static inline void usdhc_auto_tuning_mode_sel(struct sdhci_host *host) break; } + /* + * For USDHC, auto tuning circuit can not handle the async sdio + * device interrupt correctly. When sdio device use 4 data lines, + * async sdio interrupt will use the shared DAT[1], if enable auto + * tuning circuit check these 4 data lines, include the DAT[1], + * this circuit will detect this interrupt, take this as a data on + * DAT[1], and adjust the delay cell wrongly. + * This is the hardware design limitation, to avoid this, for sdio + * device, config the auto tuning circuit only check DAT[0] and CMD + * line. + */ + if (imx_data->init_card_type == MMC_TYPE_SDIO) + auto_tune_buswidth = ESDHC_VEND_SPEC2_AUTO_TUNE_1BIT_EN; + esdhc_clrset_le(host, ESDHC_VEND_SPEC2_AUTO_TUNE_MODE_MASK, auto_tune_buswidth | ESDHC_VEND_SPEC2_AUTO_TUNE_CMD_EN, ESDHC_VEND_SPEC2); + + reg = readl(host->ioaddr + ESDHC_MIX_CTRL); + reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; + writel(reg, host->ioaddr + ESDHC_MIX_CTRL); } static u32 esdhc_readl_le(struct sdhci_host *host, int reg) @@ -682,14 +713,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) } else { v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; m &= ~ESDHC_MIX_CTRL_FBCLK_SEL; - m &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; } if (val & SDHCI_CTRL_EXEC_TUNING) { v |= ESDHC_MIX_CTRL_EXE_TUNE; m |= ESDHC_MIX_CTRL_FBCLK_SEL; - m |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; - usdhc_auto_tuning_mode_sel(host); } else { v &= ~ESDHC_MIX_CTRL_EXE_TUNE; } @@ -1023,13 +1051,15 @@ static void esdhc_reset_tuning(struct sdhci_host *host) /* Reset the tuning circuit */ if (esdhc_is_usdhc(imx_data)) { + ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL); + ctrl &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { - ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL); ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; ctrl &= ~ESDHC_MIX_CTRL_FBCLK_SEL; writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL); writel(0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { + writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL); ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE; @@ -1052,9 +1082,19 @@ static void esdhc_reset_tuning(struct sdhci_host *host) } } +static void usdhc_init_card(struct mmc_host *mmc, struct mmc_card *card) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); + + imx_data->init_card_type = card->type; +} + static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); + int err; /* * i.MX uSDHC internally already uses a fixed optimized timing for @@ -1069,7 +1109,12 @@ static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) * correct delay cell. */ esdhc_reset_tuning(host); - return sdhci_execute_tuning(mmc, opcode); + err = sdhci_execute_tuning(mmc, opcode); + /* If tuning done, enable auto tuning */ + if (!err && !host->tuning_err) + usdhc_auto_tuning_mode_sel_and_en(host); + + return err; } static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val) @@ -1103,11 +1148,8 @@ static void esdhc_post_tuning(struct sdhci_host *host) { u32 reg; - usdhc_auto_tuning_mode_sel(host); - reg = readl(host->ioaddr + ESDHC_MIX_CTRL); reg &= ~ESDHC_MIX_CTRL_EXE_TUNE; - reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; writel(reg, host->ioaddr + ESDHC_MIX_CTRL); } @@ -1674,6 +1716,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) * to replace the standard one in sdhci_ops. */ host->mmc_host_ops.execute_tuning = usdhc_execute_tuning; + + /* + * Link usdhc specific mmc_host_ops init card function, + * to distinguish the card type. + */ + host->mmc_host_ops.init_card = usdhc_init_card; } err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data); |