summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/card/sdio_uart.c40
-rw-r--r--drivers/mmc/host/Kconfig2
-rw-r--r--drivers/mmc/host/mmci.c2
-rw-r--r--drivers/mmc/host/omap.c10
-rw-r--r--drivers/mmc/host/omap_hsmmc.c8
-rw-r--r--drivers/mmc/host/pxamci.c14
-rw-r--r--drivers/mmc/host/s3cmci.c2
7 files changed, 41 insertions, 37 deletions
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 36a8d53ad2a2..b8e7c5ae981e 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -231,7 +231,8 @@ static unsigned int sdio_uart_get_mctrl(struct sdio_uart_port *port)
return ret;
}
-static void sdio_uart_write_mctrl(struct sdio_uart_port *port, unsigned int mctrl)
+static void sdio_uart_write_mctrl(struct sdio_uart_port *port,
+ unsigned int mctrl)
{
unsigned char mcr = 0;
@@ -387,7 +388,8 @@ static void sdio_uart_stop_rx(struct sdio_uart_port *port)
sdio_out(port, UART_IER, port->ier);
}
-static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status)
+static void sdio_uart_receive_chars(struct sdio_uart_port *port,
+ unsigned int *status)
{
struct tty_struct *tty = port->tty;
unsigned int ch, flag;
@@ -399,7 +401,7 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *s
port->icount.rx++;
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
+ UART_LSR_FE | UART_LSR_OE))) {
/*
* For statistics only
*/
@@ -417,9 +419,9 @@ static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *s
* Mask off conditions which should be ignored.
*/
*status &= port->read_status_mask;
- if (*status & UART_LSR_BI) {
+ if (*status & UART_LSR_BI)
flag = TTY_BREAK;
- } else if (*status & UART_LSR_PE)
+ else if (*status & UART_LSR_PE)
flag = TTY_PARITY;
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
@@ -574,7 +576,7 @@ static int sdio_uart_startup(struct sdio_uart_port *port)
*/
sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
sdio_out(port, UART_FCR, 0);
/*
@@ -635,7 +637,7 @@ static void sdio_uart_shutdown(struct sdio_uart_port *port)
if (port->tty->termios->c_cflag & HUPCL)
sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- /* Disable interrupts from this port */
+ /* Disable interrupts from this port */
sdio_release_irq(port->func);
port->ier = 0;
sdio_out(port, UART_IER, 0);
@@ -659,7 +661,7 @@ skip:
free_page((unsigned long)port->xmit.buf);
}
-static int sdio_uart_open (struct tty_struct *tty, struct file * filp)
+static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
{
struct sdio_uart_port *port;
int ret;
@@ -846,7 +848,7 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_t
struct sdio_uart_port *port = tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
-#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
if ((cflag ^ old_termios->c_cflag) == 0 &&
RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
@@ -925,7 +927,7 @@ static int sdio_uart_tiocmset(struct tty_struct *tty, struct file *file,
struct sdio_uart_port *port = tty->driver_data;
int result;
- result =sdio_uart_claim_func(port);
+ result = sdio_uart_claim_func(port);
if(!result) {
sdio_uart_update_mctrl(port, set, clear);
sdio_uart_release_func(port);
@@ -946,31 +948,31 @@ static int sdio_uart_proc_show(struct seq_file *m, void *v)
seq_printf(m, "%d: uart:SDIO", i);
if(capable(CAP_SYS_ADMIN)) {
seq_printf(m, " tx:%d rx:%d",
- port->icount.tx, port->icount.rx);
+ port->icount.tx, port->icount.rx);
if (port->icount.frame)
seq_printf(m, " fe:%d",
- port->icount.frame);
+ port->icount.frame);
if (port->icount.parity)
seq_printf(m, " pe:%d",
- port->icount.parity);
+ port->icount.parity);
if (port->icount.brk)
seq_printf(m, " brk:%d",
- port->icount.brk);
+ port->icount.brk);
if (port->icount.overrun)
seq_printf(m, " oe:%d",
- port->icount.overrun);
+ port->icount.overrun);
if (port->icount.cts)
seq_printf(m, " cts:%d",
- port->icount.cts);
+ port->icount.cts);
if (port->icount.dsr)
seq_printf(m, " dsr:%d",
- port->icount.dsr);
+ port->icount.dsr);
if (port->icount.rng)
seq_printf(m, " rng:%d",
- port->icount.rng);
+ port->icount.rng);
if (port->icount.dcd)
seq_printf(m, " dcd:%d",
- port->icount.dcd);
+ port->icount.dcd);
}
sdio_uart_port_put(port);
seq_putc(m, '\n');
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 432ae8358c86..e04b751680d0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -329,7 +329,7 @@ config MMC_SDRICOH_CS
config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
- depends on MFD_TMIO || MFD_ASIC3
+ depends on MFD_TMIO || MFD_ASIC3 || SUPERH
help
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also HTC ASIC3
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a5894a6bb..90d168ad03b6 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == 0x80)
+ if (host->hw_designer == AMBA_VENDOR_ST)
clk |= MCI_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index b8fd7af1ceeb..5f970e253e50 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,12 +30,12 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
#include <mach/gpio.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
#define OMAP_MMC_REG_CMD 0x00
#define OMAP_MMC_REG_ARGL 0x04
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 0aecaaebef3d..4b2322518909 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -30,11 +30,11 @@
#include <linux/mmc/core.h>
#include <linux/io.h>
#include <linux/semaphore.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/cpu.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/cpu.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSCONFIG 0x0010
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index b00d67319058..bb47ff465c04 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -43,6 +43,9 @@
#define NR_SG 1
#define CLKRT_OFF (~0)
+#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \
+ || cpu_is_pxa935())
+
struct pxamci_host {
struct mmc_host *mmc;
spinlock_t lock;
@@ -457,7 +460,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
clk_enable(host->clk);
if (ios->clock == 26000000) {
- /* to support 26MHz on pxa300/pxa310 */
+ /* to support 26MHz */
host->clkrt = 7;
} else {
/* to handle (19.5MHz, 26MHz) */
@@ -608,8 +611,7 @@ static int pxamci_probe(struct platform_device *pdev)
* Calculate minimum clock rate, rounding up.
*/
mmc->f_min = (host->clkrate + 63) / 64;
- mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
- : host->clkrate;
+ mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
pxamci_init_ocr(host);
@@ -618,7 +620,7 @@ static int pxamci_probe(struct platform_device *pdev)
if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
- if (cpu_is_pxa300() || cpu_is_pxa310())
+ if (mmc_has_26MHz())
mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SD_HIGHSPEED;
}
@@ -760,6 +762,8 @@ static int pxamci_remove(struct platform_device *pdev)
if (mmc) {
struct pxamci_host *host = mmc_priv(mmc);
+ mmc_remove_host(mmc);
+
if (host->pdata) {
gpio_cd = host->pdata->gpio_card_detect;
gpio_ro = host->pdata->gpio_card_ro;
@@ -779,8 +783,6 @@ static int pxamci_remove(struct platform_device *pdev)
if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc);
- mmc_remove_host(mmc);
-
pxamci_stop_clock(host);
writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 99b74a351020..941a4d35ef8d 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1360,7 +1360,7 @@ static struct mmc_host_ops s3cmci_ops = {
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
/* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reaonable defaults are picked. */
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
};
#ifdef CONFIG_CPU_FREQ
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 09:28:39 +0100