summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc')
-rw-r--r--drivers/mmc/Kconfig9
-rw-r--r--drivers/mmc/card/Kconfig3
-rw-r--r--drivers/mmc/card/block.c46
-rw-r--r--drivers/mmc/card/queue.c23
-rw-r--r--drivers/mmc/core/mmc_ops.c8
-rw-r--r--drivers/mmc/core/sdio.c52
-rw-r--r--drivers/mmc/core/sdio_irq.c16
-rw-r--r--drivers/mmc/host/Kconfig19
-rw-r--r--drivers/mmc/host/mmc_spi.c32
-rw-r--r--drivers/mmc/host/sdhci-pci.c3
-rw-r--r--drivers/mmc/host/sdhci.c46
-rw-r--r--drivers/mmc/host/sdhci.h2
12 files changed, 166 insertions, 93 deletions
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index c0b41e8bcd9d..f2eeb38efa65 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -3,13 +3,14 @@
#
menuconfig MMC
- tristate "MMC/SD card support"
+ tristate "MMC/SD/SDIO card support"
depends on HAS_IOMEM
help
- MMC is the "multi-media card" bus protocol.
+ This selects MultiMediaCard, Secure Digital and Secure
+ Digital I/O support.
- If you want MMC support, you should say Y here and also
- to the specific driver for your MMC interface.
+ If you want MMC/SD/SDIO support, you should say Y here and
+ also to your specific host controller driver.
config MMC_DEBUG
bool "MMC debugging"
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig
index dd0f398ee2f5..3f2a912659af 100644
--- a/drivers/mmc/card/Kconfig
+++ b/drivers/mmc/card/Kconfig
@@ -2,7 +2,7 @@
# MMC/SD card drivers
#
-comment "MMC/SD Card Drivers"
+comment "MMC/SD/SDIO Card Drivers"
config MMC_BLOCK
tristate "MMC block device driver"
@@ -34,7 +34,6 @@ config MMC_BLOCK_BOUNCE
config SDIO_UART
tristate "SDIO UART/GPS class support"
- depends on MMC
help
SDIO function driver for SDIO cards that implements the UART
class, as well as the GPS class which appears like a UART.
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index ebc8b9d77613..1d1e469e08ea 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -57,7 +57,6 @@ struct mmc_blk_data {
struct mmc_queue queue;
unsigned int usage;
- unsigned int block_bits;
unsigned int read_only;
};
@@ -215,8 +214,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
struct mmc_blk_request brq;
- int ret = 1, data_size, i;
- struct scatterlist *sg;
+ int ret = 1;
mmc_claim_host(card->host);
@@ -232,13 +230,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
if (!mmc_card_blockaddr(card))
brq.cmd.arg <<= 9;
brq.cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
- brq.data.blksz = 1 << md->block_bits;
+ brq.data.blksz = 512;
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
- if (brq.data.blocks > card->host->max_blk_count)
- brq.data.blocks = card->host->max_blk_count;
+ brq.data.blocks = req->nr_sectors;
if (brq.data.blocks > 1) {
/* SPI multiblock writes terminate using a special
@@ -270,24 +266,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
mmc_queue_bounce_pre(mq);
- /*
- * Adjust the sg list so it is the same size as the
- * request.
- */
- if (brq.data.blocks !=
- (req->nr_sectors >> (md->block_bits - 9))) {
- data_size = brq.data.blocks * brq.data.blksz;
- for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) {
- data_size -= sg->length;
- if (data_size <= 0) {
- sg->length += data_size;
- i++;
- break;
- }
- }
- brq.data.sg_len = i;
- }
-
mmc_wait_for_req(card->host, &brq.mrq);
mmc_queue_bounce_post(mq);
@@ -372,16 +350,11 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
if (rq_data_dir(req) != READ) {
if (mmc_card_sd(card)) {
u32 blocks;
- unsigned int bytes;
blocks = mmc_sd_num_wr_blocks(card);
if (blocks != (u32)-1) {
- if (card->csd.write_partial)
- bytes = blocks << md->block_bits;
- else
- bytes = blocks << 9;
spin_lock_irq(&md->lock);
- ret = __blk_end_request(req, 0, bytes);
+ ret = __blk_end_request(req, 0, blocks << 9);
spin_unlock_irq(&md->lock);
}
} else {
@@ -431,13 +404,6 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
*/
md->read_only = mmc_blk_readonly(card);
- /*
- * Both SD and MMC specifications state (although a bit
- * unclearly in the MMC case) that a block size of 512
- * bytes must always be supported by the card.
- */
- md->block_bits = 9;
-
md->disk = alloc_disk(1 << MMC_SHIFT);
if (md->disk == NULL) {
ret = -ENOMEM;
@@ -475,7 +441,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
sprintf(md->disk->disk_name, "mmcblk%d", devidx);
- blk_queue_hardsect_size(md->queue.queue, 1 << md->block_bits);
+ blk_queue_hardsect_size(md->queue.queue, 512);
if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
/*
@@ -513,7 +479,7 @@ mmc_blk_set_blksize(struct mmc_blk_data *md, struct mmc_card *card)
mmc_claim_host(card->host);
cmd.opcode = MMC_SET_BLOCKLEN;
- cmd.arg = 1 << md->block_bits;
+ cmd.arg = 512;
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 5);
mmc_release_host(card->host);
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index 3dee97e7d165..406989e992ba 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -31,7 +31,7 @@ static int mmc_prep_request(struct request_queue *q, struct request *req)
/*
* We only like normal block requests.
*/
- if (!blk_fs_request(req) && !blk_pc_request(req)) {
+ if (!blk_fs_request(req)) {
blk_dump_rq_flags(req, "MMC bad request");
return BLKPREP_KILL;
}
@@ -131,6 +131,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
mq->req = NULL;
blk_queue_prep_rq(mq->queue, mmc_prep_request);
+ blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN, NULL);
#ifdef CONFIG_MMC_BLOCK_BOUNCE
if (host->max_hw_segs == 1) {
@@ -142,12 +143,19 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
bouncesz = host->max_req_size;
if (bouncesz > host->max_seg_size)
bouncesz = host->max_seg_size;
+ if (bouncesz > (host->max_blk_count * 512))
+ bouncesz = host->max_blk_count * 512;
+
+ if (bouncesz > 512) {
+ mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
+ if (!mq->bounce_buf) {
+ printk(KERN_WARNING "%s: unable to "
+ "allocate bounce buffer\n",
+ mmc_card_name(card));
+ }
+ }
- mq->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
- if (!mq->bounce_buf) {
- printk(KERN_WARNING "%s: unable to allocate "
- "bounce buffer\n", mmc_card_name(card));
- } else {
+ if (mq->bounce_buf) {
blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY);
blk_queue_max_sectors(mq->queue, bouncesz / 512);
blk_queue_max_phys_segments(mq->queue, bouncesz / 512);
@@ -175,7 +183,8 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
if (!mq->bounce_buf) {
blk_queue_bounce_limit(mq->queue, limit);
- blk_queue_max_sectors(mq->queue, host->max_req_size / 512);
+ blk_queue_max_sectors(mq->queue,
+ min(host->max_blk_count, host->max_req_size / 512));
blk_queue_max_phys_segments(mq->queue, host->max_phys_segs);
blk_queue_max_hw_segments(mq->queue, host->max_hw_segs);
blk_queue_max_segment_size(mq->queue, host->max_seg_size);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 64b05c6270f2..9c50e6f1c236 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -248,8 +248,12 @@ mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
sg_init_one(&sg, data_buf, len);
- if (card)
- mmc_set_data_timeout(&data, card);
+ /*
+ * The spec states that CSR and CID accesses have a timeout
+ * of 64 clock cycles.
+ */
+ data.timeout_ns = 0;
+ data.timeout_clks = 64;
mmc_wait_for_req(host, &mrq);
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 4eab79e09ccc..fb99ccff9080 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -165,6 +165,36 @@ static int sdio_enable_wide(struct mmc_card *card)
}
/*
+ * Test if the card supports high-speed mode and, if so, switch to it.
+ */
+static int sdio_enable_hs(struct mmc_card *card)
+{
+ int ret;
+ u8 speed;
+
+ if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
+ return 0;
+
+ if (!card->cccr.high_speed)
+ return 0;
+
+ ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
+ if (ret)
+ return ret;
+
+ speed |= SDIO_SPEED_EHS;
+
+ ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
+ if (ret)
+ return ret;
+
+ mmc_card_set_highspeed(card);
+ mmc_set_timing(card->host, MMC_TIMING_SD_HS);
+
+ return 0;
+}
+
+/*
* Host is being removed. Free up the current card.
*/
static void mmc_sdio_remove(struct mmc_host *host)
@@ -333,10 +363,26 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
goto remove;
/*
- * No support for high-speed yet, so just set
- * the card's maximum speed.
+ * Switch to high-speed (if supported).
*/
- mmc_set_clock(host, card->cis.max_dtr);
+ err = sdio_enable_hs(card);
+ if (err)
+ goto remove;
+
+ /*
+ * Change to the card's maximum speed.
+ */
+ if (mmc_card_highspeed(card)) {
+ /*
+ * The SDIO specification doesn't mention how
+ * the CIS transfer speed register relates to
+ * high-speed, but it seems that 50 MHz is
+ * mandatory.
+ */
+ mmc_set_clock(host, 50000000);
+ } else {
+ mmc_set_clock(host, card->cis.max_dtr);
+ }
/*
* Switch to wider bus (if supported).
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index c292e124107a..bb192f90e8e9 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -5,6 +5,8 @@
* Created: June 18, 2007
* Copyright: MontaVista Software Inc.
*
+ * Copyright 2008 Pierre Ossman
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
@@ -107,11 +109,14 @@ static int sdio_irq_thread(void *_host)
/*
* Give other threads a chance to run in the presence of
- * errors. FIXME: determine if due to card removal and
- * possibly exit this thread if so.
+ * errors.
*/
- if (ret < 0)
- ssleep(1);
+ if (ret < 0) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!kthread_should_stop())
+ schedule_timeout(HZ);
+ set_current_state(TASK_RUNNING);
+ }
/*
* Adaptive polling frequency based on the assumption
@@ -154,7 +159,8 @@ static int sdio_card_irq_get(struct mmc_card *card)
if (!host->sdio_irqs++) {
atomic_set(&host->sdio_irq_thread_abort, 0);
host->sdio_irq_thread =
- kthread_run(sdio_irq_thread, host, "ksdiorqd");
+ kthread_run(sdio_irq_thread, host, "ksdioirqd/%s",
+ mmc_hostname(host));
if (IS_ERR(host->sdio_irq_thread)) {
int err = PTR_ERR(host->sdio_irq_thread);
host->sdio_irqs--;
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1ce21d4c8608..dfa585f7feaf 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -2,7 +2,7 @@
# MMC/SD host controller drivers
#
-comment "MMC/SD Host Controller Drivers"
+comment "MMC/SD/SDIO Host Controller Drivers"
config MMC_ARMMMCI
tristate "ARM AMBA Multimedia Card Interface support"
@@ -152,21 +152,22 @@ config MMC_TIFM_SD
module will be called tifm_sd.
config MMC_SPI
- tristate "MMC/SD over SPI"
- depends on MMC && SPI_MASTER && !HIGHMEM && HAS_DMA
+ tristate "MMC/SD/SDIO over SPI"
+ depends on SPI_MASTER && !HIGHMEM && HAS_DMA
select CRC7
select CRC_ITU_T
help
- Some systems accss MMC/SD cards using a SPI controller instead of
- using a "native" MMC/SD controller. This has a disadvantage of
- being relatively high overhead, but a compensating advantage of
- working on many systems without dedicated MMC/SD controllers.
+ Some systems accss MMC/SD/SDIO cards using a SPI controller
+ instead of using a "native" MMC/SD/SDIO controller. This has a
+ disadvantage of being relatively high overhead, but a compensating
+ advantage of working on many systems without dedicated MMC/SD/SDIO
+ controllers.
If unsure, or if your system has no SPI master driver, say N.
config MMC_S3C
tristate "Samsung S3C SD/MMC Card Interface support"
- depends on ARCH_S3C2410 && MMC
+ depends on ARCH_S3C2410
help
This selects a driver for the MCI interface found in
Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
@@ -177,7 +178,7 @@ config MMC_S3C
config MMC_SDRICOH_CS
tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
- depends on EXPERIMENTAL && MMC && PCI && PCMCIA
+ depends on EXPERIMENTAL && PCI && PCMCIA
help
Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
card whenever you insert a MMC or SD card into the card slot.
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 7503b81374e0..07faf5412a1f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -95,8 +95,6 @@
* reads which takes nowhere near that long. Older cards may be able to use
* shorter timeouts ... but why bother?
*/
-#define readblock_timeout ktime_set(0, 100 * 1000 * 1000)
-#define writeblock_timeout ktime_set(0, 250 * 1000 * 1000)
#define r1b_timeout ktime_set(3, 0)
@@ -220,9 +218,9 @@ mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout)
return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0);
}
-static int mmc_spi_readtoken(struct mmc_spi_host *host)
+static int mmc_spi_readtoken(struct mmc_spi_host *host, ktime_t timeout)
{
- return mmc_spi_skip(host, readblock_timeout, 1, 0xff);
+ return mmc_spi_skip(host, timeout, 1, 0xff);
}
@@ -605,7 +603,8 @@ mmc_spi_setup_data_message(
* Return negative errno, else success.
*/
static int
-mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t)
+mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t,
+ ktime_t timeout)
{
struct spi_device *spi = host->spi;
int status, i;
@@ -673,7 +672,7 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t)
if (scratch->status[i] != 0)
return 0;
}
- return mmc_spi_wait_unbusy(host, writeblock_timeout);
+ return mmc_spi_wait_unbusy(host, timeout);
}
/*
@@ -693,7 +692,8 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t)
* STOP_TRANSMISSION command.
*/
static int
-mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t)
+mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
+ ktime_t timeout)
{
struct spi_device *spi = host->spi;
int status;
@@ -707,7 +707,7 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t)
return status;
status = scratch->status[0];
if (status == 0xff || status == 0)
- status = mmc_spi_readtoken(host);
+ status = mmc_spi_readtoken(host, timeout);
if (status == SPI_TOKEN_SINGLE) {
if (host->dma_dev) {
@@ -778,6 +778,8 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
struct scatterlist *sg;
unsigned n_sg;
int multiple = (data->blocks > 1);
+ u32 clock_rate;
+ ktime_t timeout;
if (data->flags & MMC_DATA_READ)
direction = DMA_FROM_DEVICE;
@@ -786,6 +788,14 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
mmc_spi_setup_data_message(host, multiple, direction);
t = &host->t;
+ if (t->speed_hz)
+ clock_rate = t->speed_hz;
+ else
+ clock_rate = spi->max_speed_hz;
+
+ timeout = ktime_add_ns(ktime_set(0, 0), data->timeout_ns +
+ data->timeout_clks * 1000000 / clock_rate);
+
/* Handle scatterlist segments one at a time, with synch for
* each 512-byte block
*/
@@ -832,9 +842,9 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
t->len);
if (direction == DMA_TO_DEVICE)
- status = mmc_spi_writeblock(host, t);
+ status = mmc_spi_writeblock(host, t, timeout);
else
- status = mmc_spi_readblock(host, t);
+ status = mmc_spi_readblock(host, t, timeout);
if (status < 0)
break;
@@ -917,7 +927,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
if (scratch->status[tmp] != 0)
return;
}
- tmp = mmc_spi_wait_unbusy(host, writeblock_timeout);
+ tmp = mmc_spi_wait_unbusy(host, timeout);
if (tmp < 0 && !data->error)
data->error = tmp;
}
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index fcb14c2346cc..0a84f10d719c 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -144,7 +144,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
SDHCI_QUIRK_32BIT_DMA_SIZE |
SDHCI_QUIRK_32BIT_ADMA_SIZE |
SDHCI_QUIRK_RESET_AFTER_REQUEST |
- SDHCI_QUIRK_BROKEN_SMALL_PIO;
+ SDHCI_QUIRK_BROKEN_SMALL_PIO |
+ SDHCI_QUIRK_FORCE_HIGHSPEED;
}
/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e3a8133560a2..30f64b1f2354 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -177,7 +177,7 @@ static void sdhci_read_block_pio(struct sdhci_host *host)
{
unsigned long flags;
size_t blksize, len, chunk;
- u32 scratch;
+ u32 uninitialized_var(scratch);
u8 *buf;
DBG("PIO reading\n");
@@ -1154,7 +1154,7 @@ static void sdhci_tasklet_card(unsigned long param)
spin_unlock_irqrestore(&host->lock, flags);
- mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+ mmc_detect_change(host->mmc, msecs_to_jiffies(200));
}
static void sdhci_tasklet_finish(unsigned long param)
@@ -1266,9 +1266,31 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
SDHCI_INT_INDEX))
host->cmd->error = -EILSEQ;
- if (host->cmd->error)
+ if (host->cmd->error) {
tasklet_schedule(&host->finish_tasklet);
- else if (intmask & SDHCI_INT_RESPONSE)
+ return;
+ }
+
+ /*
+ * The host can send and interrupt when the busy state has
+ * ended, allowing us to wait without wasting CPU cycles.
+ * Unfortunately this is overloaded on the "data complete"
+ * interrupt, so we need to take some care when handling
+ * it.
+ *
+ * Note: The 1.0 specification is a bit ambiguous about this
+ * feature so there might be some problems with older
+ * controllers.
+ */
+ if (host->cmd->flags & MMC_RSP_BUSY) {
+ if (host->cmd->data)
+ DBG("Cannot wait for busy signal when also "
+ "doing a data transfer");
+ else
+ return;
+ }
+
+ if (intmask & SDHCI_INT_RESPONSE)
sdhci_finish_command(host);
}
@@ -1278,11 +1300,16 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
if (!host->data) {
/*
- * A data end interrupt is sent together with the response
- * for the stop command.
+ * The "data complete" interrupt is also used to
+ * indicate that a busy state has ended. See comment
+ * above in sdhci_cmd_irq().
*/
- if (intmask & SDHCI_INT_DATA_END)
- return;
+ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
+ if (intmask & SDHCI_INT_DATA_END) {
+ sdhci_finish_command(host);
+ return;
+ }
+ }
printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
"though no data operation was in progress.\n",
@@ -1604,7 +1631,8 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->f_max = host->max_clk;
mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
- if (caps & SDHCI_CAN_DO_HISPD)
+ if ((caps & SDHCI_CAN_DO_HISPD) ||
+ (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED))
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
mmc->ocr_avail = 0;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 197d4a05f4ae..31f4b1528e76 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -208,6 +208,8 @@ struct sdhci_host {
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12)
/* Controller has an issue with buffer bits for small transfers */
#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13)
+/* Controller supports high speed but doesn't have the caps bit set */
+#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14)
int irq; /* Device IRQ */
void __iomem * ioaddr; /* Mapped address */
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-03 18:40:37 +0100